linux-next/drivers/hwmon/mc13783-adc.c

330 lines
8.7 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for the ADC on Freescale Semiconductor MC13783 and MC13892 PMICs.
*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2009 Sascha Hauer, Pengutronix
*/
#include <linux/mfd/mc13xxx.h>
#include <linux/platform_device.h>
#include <linux/hwmon-sysfs.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/hwmon.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/err.h>
#define DRIVER_NAME "mc13783-adc"
/* platform device id driver data */
#define MC13783_ADC_16CHANS 1
#define MC13783_ADC_BPDIV2 2
struct mc13783_adc_priv {
struct mc13xxx *mc13xxx;
struct device *hwmon_dev;
char name[PLATFORM_NAME_SIZE];
};
static ssize_t name_show(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct mc13783_adc_priv *priv = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", priv->name);
}
static int mc13783_adc_read(struct device *dev,
struct device_attribute *devattr, unsigned int *val)
{
struct mc13783_adc_priv *priv = dev_get_drvdata(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
unsigned int channel = attr->index;
unsigned int sample[4];
int ret;
ret = mc13xxx_adc_do_conversion(priv->mc13xxx,
MC13XXX_ADC_MODE_MULT_CHAN,
channel, 0, 0, sample);
if (ret)
return ret;
/* ADIN7 subchannels */
if (channel >= 16)
channel = 7;
channel &= 0x7;
*val = (sample[channel % 4] >> (channel > 3 ? 14 : 2)) & 0x3ff;
return 0;
}
static ssize_t mc13783_adc_bp_show(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
unsigned val;
struct platform_device *pdev = to_platform_device(dev);
kernel_ulong_t driver_data = platform_get_device_id(pdev)->driver_data;
int ret = mc13783_adc_read(dev, devattr, &val);
if (ret)
return ret;
if (driver_data & MC13783_ADC_BPDIV2)
val = DIV_ROUND_CLOSEST(val * 9, 2);
else
/*
* BP (channel 2) reports with offset 2.4V to the actual value
* to fit the input range of the ADC. unit = 2.25mV = 9/4 mV.
*/
val = DIV_ROUND_CLOSEST(val * 9, 4) + 2400;
return sprintf(buf, "%u\n", val);
}
static ssize_t mc13783_adc_gp_show(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
unsigned val;
int ret = mc13783_adc_read(dev, devattr, &val);
if (ret)
return ret;
/*
* input range is [0, 2.3V], val has 10 bits, so each bit
* is worth 9/4 mV.
*/
val = DIV_ROUND_CLOSEST(val * 9, 4);
return sprintf(buf, "%u\n", val);
}
static ssize_t mc13783_adc_uid_show(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
unsigned int val;
struct platform_device *pdev = to_platform_device(dev);
kernel_ulong_t driver_data = platform_get_device_id(pdev)->driver_data;
int ret = mc13783_adc_read(dev, devattr, &val);
if (ret)
return ret;
if (driver_data & MC13783_ADC_BPDIV2)
/* MC13892 have 1/2 divider, input range is [0, 4.800V] */
val = DIV_ROUND_CLOSEST(val * 4800, 1024);
else
/* MC13783 have 0.9 divider, input range is [0, 2.555V] */
val = DIV_ROUND_CLOSEST(val * 2555, 1024);
return sprintf(buf, "%u\n", val);
}
static ssize_t mc13783_adc_temp_show(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
unsigned int val;
struct platform_device *pdev = to_platform_device(dev);
kernel_ulong_t driver_data = platform_get_device_id(pdev)->driver_data;
int ret = mc13783_adc_read(dev, devattr, &val);
if (ret)
return ret;
if (driver_data & MC13783_ADC_BPDIV2) {
/*
* MC13892:
* Die Temperature Read Out Code at 25C 680
* Temperature change per LSB +0.4244C
*/
ret = DIV_ROUND_CLOSEST(-2635920 + val * 4244, 10);
} else {
/*
* MC13783:
* Die Temperature Read Out Code at 25C 282
* Temperature change per LSB -1.14C
*/
ret = 346480 - 1140 * val;
}
return sprintf(buf, "%d\n", ret);
}
static DEVICE_ATTR_RO(name);
static SENSOR_DEVICE_ATTR_RO(in2_input, mc13783_adc_bp, 2);
static SENSOR_DEVICE_ATTR_RO(in5_input, mc13783_adc_gp, 5);
static SENSOR_DEVICE_ATTR_RO(in6_input, mc13783_adc_gp, 6);
static SENSOR_DEVICE_ATTR_RO(in7_input, mc13783_adc_gp, 7);
static SENSOR_DEVICE_ATTR_RO(in8_input, mc13783_adc_gp, 8);
static SENSOR_DEVICE_ATTR_RO(in9_input, mc13783_adc_gp, 9);
static SENSOR_DEVICE_ATTR_RO(in10_input, mc13783_adc_gp, 10);
static SENSOR_DEVICE_ATTR_RO(in11_input, mc13783_adc_gp, 11);
static SENSOR_DEVICE_ATTR_RO(in12_input, mc13783_adc_gp, 12);
static SENSOR_DEVICE_ATTR_RO(in13_input, mc13783_adc_gp, 13);
static SENSOR_DEVICE_ATTR_RO(in14_input, mc13783_adc_gp, 14);
static SENSOR_DEVICE_ATTR_RO(in15_input, mc13783_adc_gp, 15);
static SENSOR_DEVICE_ATTR_RO(in16_input, mc13783_adc_uid, 16);
static SENSOR_DEVICE_ATTR_RO(temp1_input, mc13783_adc_temp, 17);
static struct attribute *mc13783_attr_base[] = {
&dev_attr_name.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_in5_input.dev_attr.attr,
&sensor_dev_attr_in6_input.dev_attr.attr,
&sensor_dev_attr_in7_input.dev_attr.attr,
&sensor_dev_attr_in16_input.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
NULL
};
static const struct attribute_group mc13783_group_base = {
.attrs = mc13783_attr_base,
};
/* these are only used if MC13783_ADC_16CHANS is provided in driver data */
static struct attribute *mc13783_attr_16chans[] = {
&sensor_dev_attr_in8_input.dev_attr.attr,
&sensor_dev_attr_in9_input.dev_attr.attr,
&sensor_dev_attr_in10_input.dev_attr.attr,
&sensor_dev_attr_in11_input.dev_attr.attr,
NULL
};
static const struct attribute_group mc13783_group_16chans = {
.attrs = mc13783_attr_16chans,
};
/* last four channels may be occupied by the touchscreen */
static struct attribute *mc13783_attr_ts[] = {
&sensor_dev_attr_in12_input.dev_attr.attr,
&sensor_dev_attr_in13_input.dev_attr.attr,
&sensor_dev_attr_in14_input.dev_attr.attr,
&sensor_dev_attr_in15_input.dev_attr.attr,
NULL
};
static const struct attribute_group mc13783_group_ts = {
.attrs = mc13783_attr_ts,
};
static int mc13783_adc_use_touchscreen(struct platform_device *pdev)
{
struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
unsigned flags = mc13xxx_get_flags(priv->mc13xxx);
return flags & MC13XXX_USE_TOUCHSCREEN;
}
static int __init mc13783_adc_probe(struct platform_device *pdev)
{
struct mc13783_adc_priv *priv;
int ret;
const struct platform_device_id *id = platform_get_device_id(pdev);
char *dash;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
snprintf(priv->name, ARRAY_SIZE(priv->name), "%s", id->name);
dash = strchr(priv->name, '-');
if (dash)
*dash = '\0';
platform_set_drvdata(pdev, priv);
/* Register sysfs hooks */
ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group_base);
if (ret)
return ret;
if (id->driver_data & MC13783_ADC_16CHANS) {
ret = sysfs_create_group(&pdev->dev.kobj,
&mc13783_group_16chans);
if (ret)
goto out_err_create_16chans;
}
if (!mc13783_adc_use_touchscreen(pdev)) {
ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group_ts);
if (ret)
goto out_err_create_ts;
}
priv->hwmon_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(priv->hwmon_dev)) {
ret = PTR_ERR(priv->hwmon_dev);
dev_err(&pdev->dev,
"hwmon_device_register failed with %d.\n", ret);
goto out_err_register;
}
return 0;
out_err_register:
if (!mc13783_adc_use_touchscreen(pdev))
sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
out_err_create_ts:
if (id->driver_data & MC13783_ADC_16CHANS)
sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_16chans);
out_err_create_16chans:
sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_base);
return ret;
}
static void mc13783_adc_remove(struct platform_device *pdev)
{
struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
kernel_ulong_t driver_data = platform_get_device_id(pdev)->driver_data;
hwmon_device_unregister(priv->hwmon_dev);
if (!mc13783_adc_use_touchscreen(pdev))
sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
if (driver_data & MC13783_ADC_16CHANS)
sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_16chans);
sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_base);
}
static const struct platform_device_id mc13783_adc_idtable[] = {
{
.name = "mc13783-adc",
.driver_data = MC13783_ADC_16CHANS,
}, {
.name = "mc13892-adc",
.driver_data = MC13783_ADC_BPDIV2,
}, {
/* sentinel */
}
};
MODULE_DEVICE_TABLE(platform, mc13783_adc_idtable);
static struct platform_driver mc13783_adc_driver = {
.remove = mc13783_adc_remove,
.driver = {
.name = DRIVER_NAME,
},
.id_table = mc13783_adc_idtable,
};
module_platform_driver_probe(mc13783_adc_driver, mc13783_adc_probe);
MODULE_DESCRIPTION("MC13783 ADC driver");
MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>");
MODULE_LICENSE("GPL");