2023-03-28 23:52:08 +00:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0-only */
|
user_events: Add minimal support for trace_event into ftrace
Minimal support for interacting with dynamic events, trace_event and
ftrace. Core outline of flow between user process, ioctl and trace_event
APIs.
User mode processes that wish to use trace events to get data into
ftrace, perf, eBPF, etc are limited to uprobes today. The user events
features enables an ABI for user mode processes to create and write to
trace events that are isolated from kernel level trace events. This
enables a faster path for tracing from user mode data as well as opens
managed code to participate in trace events, where stub locations are
dynamic.
User processes often want to trace only when it's useful. To enable this
a set of pages are mapped into the user process space that indicate the
current state of the user events that have been registered. User
processes can check if their event is hooked to a trace/probe, and if it
is, emit the event data out via the write() syscall.
Two new files are introduced into tracefs to accomplish this:
user_events_status - This file is mmap'd into participating user mode
processes to indicate event status.
user_events_data - This file is opened and register/delete ioctl's are
issued to create/open/delete trace events that can be used for tracing.
The typical scenario is on process start to mmap user_events_status. Processes
then register the events they plan to use via the REG ioctl. The ioctl reads
and updates the passed in user_reg struct. The status_index of the struct is
used to know the byte in the status page to check for that event. The
write_index of the struct is used to describe that event when writing out to
the fd that was used for the ioctl call. The data must always include this
index first when writing out data for an event. Data can be written either by
write() or by writev().
For example, in memory:
int index;
char data[];
Psuedo code example of typical usage:
struct user_reg reg;
int page_fd = open("user_events_status", O_RDWR);
char *page_data = mmap(NULL, PAGE_SIZE, PROT_READ, MAP_SHARED, page_fd, 0);
close(page_fd);
int data_fd = open("user_events_data", O_RDWR);
reg.size = sizeof(reg);
reg.name_args = (__u64)"test";
ioctl(data_fd, DIAG_IOCSREG, ®);
int status_id = reg.status_index;
int write_id = reg.write_index;
struct iovec io[2];
io[0].iov_base = &write_id;
io[0].iov_len = sizeof(write_id);
io[1].iov_base = payload;
io[1].iov_len = sizeof(payload);
if (page_data[status_id])
writev(data_fd, io, 2);
User events are also exposed via the dynamic_events tracefs file for
both create and delete. Current status is exposed via the user_events_status
tracefs file.
Simple example to register a user event via dynamic_events:
echo u:test >> dynamic_events
cat dynamic_events
u:test
If an event is hooked to a probe, the probe hooked shows up:
echo 1 > events/user_events/test/enable
cat user_events_status
1:test # Used by ftrace
Active: 1
Busy: 1
Max: 4096
If an event is not hooked to a probe, no probe status shows up:
echo 0 > events/user_events/test/enable
cat user_events_status
1:test
Active: 1
Busy: 0
Max: 4096
Users can describe the trace event format via the following format:
name[:FLAG1[,FLAG2...] [field1[;field2...]]
Each field has the following format:
type name
Example for char array with a size of 20 named msg:
echo 'u:detailed char[20] msg' >> dynamic_events
cat dynamic_events
u:detailed char[20] msg
Data offsets are based on the data written out via write() and will be
updated to reflect the correct offset in the trace_event fields. For dynamic
data it is recommended to use the new __rel_loc data type. This type will be
the same as __data_loc, but the offset is relative to this entry. This allows
user_events to not worry about what common fields are being inserted before
the data.
The above format is valid for both the ioctl and the dynamic_events file.
Link: https://lkml.kernel.org/r/20220118204326.2169-2-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-01-18 20:43:15 +00:00
|
|
|
/*
|
2023-03-28 23:52:08 +00:00
|
|
|
* Copyright (c) 2022, Microsoft Corporation.
|
user_events: Add minimal support for trace_event into ftrace
Minimal support for interacting with dynamic events, trace_event and
ftrace. Core outline of flow between user process, ioctl and trace_event
APIs.
User mode processes that wish to use trace events to get data into
ftrace, perf, eBPF, etc are limited to uprobes today. The user events
features enables an ABI for user mode processes to create and write to
trace events that are isolated from kernel level trace events. This
enables a faster path for tracing from user mode data as well as opens
managed code to participate in trace events, where stub locations are
dynamic.
User processes often want to trace only when it's useful. To enable this
a set of pages are mapped into the user process space that indicate the
current state of the user events that have been registered. User
processes can check if their event is hooked to a trace/probe, and if it
is, emit the event data out via the write() syscall.
Two new files are introduced into tracefs to accomplish this:
user_events_status - This file is mmap'd into participating user mode
processes to indicate event status.
user_events_data - This file is opened and register/delete ioctl's are
issued to create/open/delete trace events that can be used for tracing.
The typical scenario is on process start to mmap user_events_status. Processes
then register the events they plan to use via the REG ioctl. The ioctl reads
and updates the passed in user_reg struct. The status_index of the struct is
used to know the byte in the status page to check for that event. The
write_index of the struct is used to describe that event when writing out to
the fd that was used for the ioctl call. The data must always include this
index first when writing out data for an event. Data can be written either by
write() or by writev().
For example, in memory:
int index;
char data[];
Psuedo code example of typical usage:
struct user_reg reg;
int page_fd = open("user_events_status", O_RDWR);
char *page_data = mmap(NULL, PAGE_SIZE, PROT_READ, MAP_SHARED, page_fd, 0);
close(page_fd);
int data_fd = open("user_events_data", O_RDWR);
reg.size = sizeof(reg);
reg.name_args = (__u64)"test";
ioctl(data_fd, DIAG_IOCSREG, ®);
int status_id = reg.status_index;
int write_id = reg.write_index;
struct iovec io[2];
io[0].iov_base = &write_id;
io[0].iov_len = sizeof(write_id);
io[1].iov_base = payload;
io[1].iov_len = sizeof(payload);
if (page_data[status_id])
writev(data_fd, io, 2);
User events are also exposed via the dynamic_events tracefs file for
both create and delete. Current status is exposed via the user_events_status
tracefs file.
Simple example to register a user event via dynamic_events:
echo u:test >> dynamic_events
cat dynamic_events
u:test
If an event is hooked to a probe, the probe hooked shows up:
echo 1 > events/user_events/test/enable
cat user_events_status
1:test # Used by ftrace
Active: 1
Busy: 1
Max: 4096
If an event is not hooked to a probe, no probe status shows up:
echo 0 > events/user_events/test/enable
cat user_events_status
1:test
Active: 1
Busy: 0
Max: 4096
Users can describe the trace event format via the following format:
name[:FLAG1[,FLAG2...] [field1[;field2...]]
Each field has the following format:
type name
Example for char array with a size of 20 named msg:
echo 'u:detailed char[20] msg' >> dynamic_events
cat dynamic_events
u:detailed char[20] msg
Data offsets are based on the data written out via write() and will be
updated to reflect the correct offset in the trace_event fields. For dynamic
data it is recommended to use the new __rel_loc data type. This type will be
the same as __data_loc, but the offset is relative to this entry. This allows
user_events to not worry about what common fields are being inserted before
the data.
The above format is valid for both the ioctl and the dynamic_events file.
Link: https://lkml.kernel.org/r/20220118204326.2169-2-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-01-18 20:43:15 +00:00
|
|
|
*
|
|
|
|
|
* Authors:
|
|
|
|
|
* Beau Belgrave <beaub@linux.microsoft.com>
|
|
|
|
|
*/
|
|
|
|
|
|
2023-03-28 23:52:08 +00:00
|
|
|
#ifndef _LINUX_USER_EVENTS_H
|
|
|
|
|
#define _LINUX_USER_EVENTS_H
|
user_events: Add minimal support for trace_event into ftrace
Minimal support for interacting with dynamic events, trace_event and
ftrace. Core outline of flow between user process, ioctl and trace_event
APIs.
User mode processes that wish to use trace events to get data into
ftrace, perf, eBPF, etc are limited to uprobes today. The user events
features enables an ABI for user mode processes to create and write to
trace events that are isolated from kernel level trace events. This
enables a faster path for tracing from user mode data as well as opens
managed code to participate in trace events, where stub locations are
dynamic.
User processes often want to trace only when it's useful. To enable this
a set of pages are mapped into the user process space that indicate the
current state of the user events that have been registered. User
processes can check if their event is hooked to a trace/probe, and if it
is, emit the event data out via the write() syscall.
Two new files are introduced into tracefs to accomplish this:
user_events_status - This file is mmap'd into participating user mode
processes to indicate event status.
user_events_data - This file is opened and register/delete ioctl's are
issued to create/open/delete trace events that can be used for tracing.
The typical scenario is on process start to mmap user_events_status. Processes
then register the events they plan to use via the REG ioctl. The ioctl reads
and updates the passed in user_reg struct. The status_index of the struct is
used to know the byte in the status page to check for that event. The
write_index of the struct is used to describe that event when writing out to
the fd that was used for the ioctl call. The data must always include this
index first when writing out data for an event. Data can be written either by
write() or by writev().
For example, in memory:
int index;
char data[];
Psuedo code example of typical usage:
struct user_reg reg;
int page_fd = open("user_events_status", O_RDWR);
char *page_data = mmap(NULL, PAGE_SIZE, PROT_READ, MAP_SHARED, page_fd, 0);
close(page_fd);
int data_fd = open("user_events_data", O_RDWR);
reg.size = sizeof(reg);
reg.name_args = (__u64)"test";
ioctl(data_fd, DIAG_IOCSREG, ®);
int status_id = reg.status_index;
int write_id = reg.write_index;
struct iovec io[2];
io[0].iov_base = &write_id;
io[0].iov_len = sizeof(write_id);
io[1].iov_base = payload;
io[1].iov_len = sizeof(payload);
if (page_data[status_id])
writev(data_fd, io, 2);
User events are also exposed via the dynamic_events tracefs file for
both create and delete. Current status is exposed via the user_events_status
tracefs file.
Simple example to register a user event via dynamic_events:
echo u:test >> dynamic_events
cat dynamic_events
u:test
If an event is hooked to a probe, the probe hooked shows up:
echo 1 > events/user_events/test/enable
cat user_events_status
1:test # Used by ftrace
Active: 1
Busy: 1
Max: 4096
If an event is not hooked to a probe, no probe status shows up:
echo 0 > events/user_events/test/enable
cat user_events_status
1:test
Active: 1
Busy: 0
Max: 4096
Users can describe the trace event format via the following format:
name[:FLAG1[,FLAG2...] [field1[;field2...]]
Each field has the following format:
type name
Example for char array with a size of 20 named msg:
echo 'u:detailed char[20] msg' >> dynamic_events
cat dynamic_events
u:detailed char[20] msg
Data offsets are based on the data written out via write() and will be
updated to reflect the correct offset in the trace_event fields. For dynamic
data it is recommended to use the new __rel_loc data type. This type will be
the same as __data_loc, but the offset is relative to this entry. This allows
user_events to not worry about what common fields are being inserted before
the data.
The above format is valid for both the ioctl and the dynamic_events file.
Link: https://lkml.kernel.org/r/20220118204326.2169-2-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-01-18 20:43:15 +00:00
|
|
|
|
2023-03-28 23:52:10 +00:00
|
|
|
#include <linux/list.h>
|
|
|
|
|
#include <linux/refcount.h>
|
|
|
|
|
#include <linux/mm_types.h>
|
|
|
|
|
#include <linux/workqueue.h>
|
2023-03-28 23:52:08 +00:00
|
|
|
#include <uapi/linux/user_events.h>
|
user_events: Add minimal support for trace_event into ftrace
Minimal support for interacting with dynamic events, trace_event and
ftrace. Core outline of flow between user process, ioctl and trace_event
APIs.
User mode processes that wish to use trace events to get data into
ftrace, perf, eBPF, etc are limited to uprobes today. The user events
features enables an ABI for user mode processes to create and write to
trace events that are isolated from kernel level trace events. This
enables a faster path for tracing from user mode data as well as opens
managed code to participate in trace events, where stub locations are
dynamic.
User processes often want to trace only when it's useful. To enable this
a set of pages are mapped into the user process space that indicate the
current state of the user events that have been registered. User
processes can check if their event is hooked to a trace/probe, and if it
is, emit the event data out via the write() syscall.
Two new files are introduced into tracefs to accomplish this:
user_events_status - This file is mmap'd into participating user mode
processes to indicate event status.
user_events_data - This file is opened and register/delete ioctl's are
issued to create/open/delete trace events that can be used for tracing.
The typical scenario is on process start to mmap user_events_status. Processes
then register the events they plan to use via the REG ioctl. The ioctl reads
and updates the passed in user_reg struct. The status_index of the struct is
used to know the byte in the status page to check for that event. The
write_index of the struct is used to describe that event when writing out to
the fd that was used for the ioctl call. The data must always include this
index first when writing out data for an event. Data can be written either by
write() or by writev().
For example, in memory:
int index;
char data[];
Psuedo code example of typical usage:
struct user_reg reg;
int page_fd = open("user_events_status", O_RDWR);
char *page_data = mmap(NULL, PAGE_SIZE, PROT_READ, MAP_SHARED, page_fd, 0);
close(page_fd);
int data_fd = open("user_events_data", O_RDWR);
reg.size = sizeof(reg);
reg.name_args = (__u64)"test";
ioctl(data_fd, DIAG_IOCSREG, ®);
int status_id = reg.status_index;
int write_id = reg.write_index;
struct iovec io[2];
io[0].iov_base = &write_id;
io[0].iov_len = sizeof(write_id);
io[1].iov_base = payload;
io[1].iov_len = sizeof(payload);
if (page_data[status_id])
writev(data_fd, io, 2);
User events are also exposed via the dynamic_events tracefs file for
both create and delete. Current status is exposed via the user_events_status
tracefs file.
Simple example to register a user event via dynamic_events:
echo u:test >> dynamic_events
cat dynamic_events
u:test
If an event is hooked to a probe, the probe hooked shows up:
echo 1 > events/user_events/test/enable
cat user_events_status
1:test # Used by ftrace
Active: 1
Busy: 1
Max: 4096
If an event is not hooked to a probe, no probe status shows up:
echo 0 > events/user_events/test/enable
cat user_events_status
1:test
Active: 1
Busy: 0
Max: 4096
Users can describe the trace event format via the following format:
name[:FLAG1[,FLAG2...] [field1[;field2...]]
Each field has the following format:
type name
Example for char array with a size of 20 named msg:
echo 'u:detailed char[20] msg' >> dynamic_events
cat dynamic_events
u:detailed char[20] msg
Data offsets are based on the data written out via write() and will be
updated to reflect the correct offset in the trace_event fields. For dynamic
data it is recommended to use the new __rel_loc data type. This type will be
the same as __data_loc, but the offset is relative to this entry. This allows
user_events to not worry about what common fields are being inserted before
the data.
The above format is valid for both the ioctl and the dynamic_events file.
Link: https://lkml.kernel.org/r/20220118204326.2169-2-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-01-18 20:43:15 +00:00
|
|
|
|
2023-03-28 23:52:09 +00:00
|
|
|
#ifdef CONFIG_USER_EVENTS
|
|
|
|
|
struct user_event_mm {
|
2023-05-19 23:07:40 +00:00
|
|
|
struct list_head mms_link;
|
2023-03-28 23:52:19 +00:00
|
|
|
struct list_head enablers;
|
|
|
|
|
struct mm_struct *mm;
|
2023-05-19 23:07:41 +00:00
|
|
|
/* Used for one-shot lists, protected by event_mutex */
|
2023-03-28 23:52:19 +00:00
|
|
|
struct user_event_mm *next;
|
|
|
|
|
refcount_t refcnt;
|
|
|
|
|
refcount_t tasks;
|
|
|
|
|
struct rcu_work put_rwork;
|
2023-03-28 23:52:09 +00:00
|
|
|
};
|
|
|
|
|
|
2023-03-28 23:52:10 +00:00
|
|
|
extern void user_event_mm_dup(struct task_struct *t,
|
|
|
|
|
struct user_event_mm *old_mm);
|
|
|
|
|
|
|
|
|
|
extern void user_event_mm_remove(struct task_struct *t);
|
|
|
|
|
|
|
|
|
|
static inline void user_events_fork(struct task_struct *t,
|
|
|
|
|
unsigned long clone_flags)
|
|
|
|
|
{
|
|
|
|
|
struct user_event_mm *old_mm;
|
|
|
|
|
|
|
|
|
|
if (!t || !current->user_event_mm)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
old_mm = current->user_event_mm;
|
|
|
|
|
|
|
|
|
|
if (clone_flags & CLONE_VM) {
|
|
|
|
|
t->user_event_mm = old_mm;
|
|
|
|
|
refcount_inc(&old_mm->tasks);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
user_event_mm_dup(t, old_mm);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void user_events_execve(struct task_struct *t)
|
|
|
|
|
{
|
|
|
|
|
if (!t || !t->user_event_mm)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
user_event_mm_remove(t);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void user_events_exit(struct task_struct *t)
|
|
|
|
|
{
|
|
|
|
|
if (!t || !t->user_event_mm)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
user_event_mm_remove(t);
|
|
|
|
|
}
|
|
|
|
|
#else
|
2023-03-28 23:52:09 +00:00
|
|
|
static inline void user_events_fork(struct task_struct *t,
|
|
|
|
|
unsigned long clone_flags)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void user_events_execve(struct task_struct *t)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void user_events_exit(struct task_struct *t)
|
|
|
|
|
{
|
|
|
|
|
}
|
2023-03-28 23:52:10 +00:00
|
|
|
#endif /* CONFIG_USER_EVENTS */
|
2023-03-28 23:52:09 +00:00
|
|
|
|
2023-03-28 23:52:08 +00:00
|
|
|
#endif /* _LINUX_USER_EVENTS_H */
|