linux-next/io_uring/rw.c

1366 lines
35 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/file.h>
#include <linux/blk-mq.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/fsnotify.h>
#include <linux/poll.h>
#include <linux/nospec.h>
#include <linux/compat.h>
#include <linux/io_uring/cmd.h>
#include <linux/indirect_call_wrapper.h>
#include <uapi/linux/io_uring.h>
#include "io_uring.h"
#include "opdef.h"
#include "kbuf.h"
#include "alloc_cache.h"
#include "rsrc.h"
io_uring/rw: ensure poll based multishot read retries appropriately io_read_mshot() always relies on poll triggering retries, and this works fine as long as we do a retry per size of the buffer being read. The buffer size is given by the size of the buffer(s) in the given buffer group ID. But if we're reading less than what is available, then we don't always get to read everything that is available. For example, if the buffers available are 32 bytes and we have 64 bytes to read, then we'll correctly read the first 32 bytes and then wait for another poll trigger before we attempt the next read. This next poll trigger may never happen, in which case we just sit forever and never make progress, or it may trigger at some point in the future, and now we're just delivering the available data much later than we should have. io_read_mshot() could do retries itself, but that is wasteful as we'll be going through all of __io_read() again, and most likely in vain. Rather than do that, bump our poll reference count and have io_poll_check_events() do one more loop and check with vfs_poll() if we have more data to read. If we do, io_read_mshot() will get invoked again directly and we'll read the next chunk. io_poll_multishot_retry() must only get called from inside io_poll_issue(), which is our multishot retry handler, as we know we already "own" the request at this point. Cc: stable@vger.kernel.org Link: https://github.com/axboe/liburing/issues/1041 Fixes: fc68fcda0491 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-01-27 20:44:58 +00:00
#include "poll.h"
#include "rw.h"
struct io_rw {
/* NOTE: kiocb has the file as the first member, so don't do it here */
struct kiocb kiocb;
u64 addr;
u32 len;
rwf_t flags;
};
static bool io_file_supports_nowait(struct io_kiocb *req, __poll_t mask)
{
/* If FMODE_NOWAIT is set for a file, we're golden */
if (req->flags & REQ_F_SUPPORT_NOWAIT)
return true;
/* No FMODE_NOWAIT, if we can poll, check the status */
if (io_file_can_poll(req)) {
struct poll_table_struct pt = { ._key = mask };
return vfs_poll(req->file, &pt) & mask;
}
/* No FMODE_NOWAIT support, and file isn't pollable. Tough luck. */
return false;
}
#ifdef CONFIG_COMPAT
static int io_iov_compat_buffer_select_prep(struct io_rw *rw)
{
struct compat_iovec __user *uiov;
compat_ssize_t clen;
uiov = u64_to_user_ptr(rw->addr);
if (!access_ok(uiov, sizeof(*uiov)))
return -EFAULT;
if (__get_user(clen, &uiov->iov_len))
return -EFAULT;
if (clen < 0)
return -EINVAL;
rw->len = clen;
return 0;
}
#endif
static int io_iov_buffer_select_prep(struct io_kiocb *req)
{
struct iovec __user *uiov;
struct iovec iov;
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
if (rw->len != 1)
return -EINVAL;
#ifdef CONFIG_COMPAT
if (req->ctx->compat)
return io_iov_compat_buffer_select_prep(rw);
#endif
uiov = u64_to_user_ptr(rw->addr);
if (copy_from_user(&iov, uiov, sizeof(*uiov)))
return -EFAULT;
rw->len = iov.iov_len;
return 0;
}
static int __io_import_iovec(int ddir, struct io_kiocb *req,
struct io_async_rw *io,
unsigned int issue_flags)
{
const struct io_issue_def *def = &io_issue_defs[req->opcode];
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
struct iovec *iov;
void __user *buf;
int nr_segs, ret;
size_t sqe_len;
buf = u64_to_user_ptr(rw->addr);
sqe_len = rw->len;
if (!def->vectored || req->flags & REQ_F_BUFFER_SELECT) {
if (io_do_buffer_select(req)) {
buf = io_buffer_select(req, &sqe_len, issue_flags);
if (!buf)
return -ENOBUFS;
rw->addr = (unsigned long) buf;
rw->len = sqe_len;
}
return import_ubuf(ddir, buf, sqe_len, &io->iter);
}
if (io->free_iovec) {
nr_segs = io->free_iov_nr;
iov = io->free_iovec;
} else {
iov = &io->fast_iov;
nr_segs = 1;
}
ret = __import_iovec(ddir, buf, sqe_len, nr_segs, &iov, &io->iter,
req->ctx->compat);
if (unlikely(ret < 0))
return ret;
if (iov) {
req->flags |= REQ_F_NEED_CLEANUP;
io->free_iov_nr = io->iter.nr_segs;
kfree(io->free_iovec);
io->free_iovec = iov;
}
return 0;
}
static inline int io_import_iovec(int rw, struct io_kiocb *req,
struct io_async_rw *io,
unsigned int issue_flags)
{
int ret;
ret = __io_import_iovec(rw, req, io, issue_flags);
if (unlikely(ret < 0))
return ret;
iov_iter_save_state(&io->iter, &io->iter_state);
return 0;
}
static void io_rw_iovec_free(struct io_async_rw *rw)
{
if (rw->free_iovec) {
kfree(rw->free_iovec);
rw->free_iov_nr = 0;
rw->free_iovec = NULL;
}
}
static void io_rw_recycle(struct io_kiocb *req, unsigned int issue_flags)
{
struct io_async_rw *rw = req->async_data;
struct iovec *iov;
if (unlikely(issue_flags & IO_URING_F_UNLOCKED)) {
io_rw_iovec_free(rw);
return;
}
iov = rw->free_iovec;
if (io_alloc_cache_put(&req->ctx->rw_cache, rw)) {
if (iov)
kasan_mempool_poison_object(iov);
req->async_data = NULL;
req->flags &= ~REQ_F_ASYNC_DATA;
}
}
static void io_req_rw_cleanup(struct io_kiocb *req, unsigned int issue_flags)
{
/*
* Disable quick recycling for anything that's gone through io-wq.
* In theory, this should be fine to cleanup. However, some read or
* write iter handling touches the iovec AFTER having called into the
* handler, eg to reexpand or revert. This means we can have:
*
* task io-wq
* issue
* punt to io-wq
* issue
* blkdev_write_iter()
* ->ki_complete()
* io_complete_rw()
* queue tw complete
* run tw
* req_rw_cleanup
* iov_iter_count() <- look at iov_iter again
*
* which can lead to a UAF. This is only possible for io-wq offload
* as the cleanup can run in parallel. As io-wq is not the fast path,
* just leave cleanup to the end.
*
* This is really a bug in the core code that does this, any issue
* path should assume that a successful (or -EIOCBQUEUED) return can
* mean that the underlying data can be gone at any time. But that
* should be fixed seperately, and then this check could be killed.
*/
if (!(req->flags & REQ_F_REFCOUNT)) {
req->flags &= ~REQ_F_NEED_CLEANUP;
io_rw_recycle(req, issue_flags);
}
}
static void io_rw_async_data_init(void *obj)
{
struct io_async_rw *rw = (struct io_async_rw *)obj;
rw->free_iovec = NULL;
rw->bytes_done = 0;
}
static int io_rw_alloc_async(struct io_kiocb *req)
{
struct io_ring_ctx *ctx = req->ctx;
struct io_async_rw *rw;
rw = io_uring_alloc_async_data(&ctx->rw_cache, req, io_rw_async_data_init);
if (!rw)
return -ENOMEM;
if (rw->free_iovec) {
kasan_mempool_unpoison_object(rw->free_iovec,
rw->free_iov_nr * sizeof(struct iovec));
req->flags |= REQ_F_NEED_CLEANUP;
rw->bytes_done = 0;
}
return 0;
}
static int io_prep_rw_setup(struct io_kiocb *req, int ddir, bool do_import)
{
struct io_async_rw *rw;
if (io_rw_alloc_async(req))
return -ENOMEM;
if (!do_import || io_do_buffer_select(req))
return 0;
rw = req->async_data;
return io_import_iovec(ddir, req, rw, 0);
}
static inline void io_meta_save_state(struct io_async_rw *io)
{
io->meta_state.seed = io->meta.seed;
iov_iter_save_state(&io->meta.iter, &io->meta_state.iter_meta);
}
static inline void io_meta_restore(struct io_async_rw *io, struct kiocb *kiocb)
{
if (kiocb->ki_flags & IOCB_HAS_METADATA) {
io->meta.seed = io->meta_state.seed;
iov_iter_restore(&io->meta.iter, &io->meta_state.iter_meta);
}
}
static int io_prep_rw_pi(struct io_kiocb *req, struct io_rw *rw, int ddir,
u64 attr_ptr, u64 attr_type_mask)
{
struct io_uring_attr_pi pi_attr;
struct io_async_rw *io;
int ret;
if (copy_from_user(&pi_attr, u64_to_user_ptr(attr_ptr),
sizeof(pi_attr)))
return -EFAULT;
if (pi_attr.rsvd)
return -EINVAL;
io = req->async_data;
io->meta.flags = pi_attr.flags;
io->meta.app_tag = pi_attr.app_tag;
io->meta.seed = pi_attr.seed;
ret = import_ubuf(ddir, u64_to_user_ptr(pi_attr.addr),
pi_attr.len, &io->meta.iter);
if (unlikely(ret < 0))
return ret;
req->flags |= REQ_F_HAS_METADATA;
io_meta_save_state(io);
return ret;
}
static int io_prep_rw(struct io_kiocb *req, const struct io_uring_sqe *sqe,
int ddir, bool do_import)
{
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
unsigned ioprio;
u64 attr_type_mask;
int ret;
rw->kiocb.ki_pos = READ_ONCE(sqe->off);
/* used for fixed read/write too - just read unconditionally */
req->buf_index = READ_ONCE(sqe->buf_index);
ioprio = READ_ONCE(sqe->ioprio);
if (ioprio) {
ret = ioprio_check_cap(ioprio);
if (ret)
return ret;
rw->kiocb.ki_ioprio = ioprio;
} else {
rw->kiocb.ki_ioprio = get_current_ioprio();
}
rw->kiocb.dio_complete = NULL;
rw->kiocb.ki_flags = 0;
rw->addr = READ_ONCE(sqe->addr);
rw->len = READ_ONCE(sqe->len);
rw->flags = READ_ONCE(sqe->rw_flags);
ret = io_prep_rw_setup(req, ddir, do_import);
if (unlikely(ret))
return ret;
attr_type_mask = READ_ONCE(sqe->attr_type_mask);
if (attr_type_mask) {
u64 attr_ptr;
/* only PI attribute is supported currently */
if (attr_type_mask != IORING_RW_ATTR_FLAG_PI)
return -EINVAL;
attr_ptr = READ_ONCE(sqe->attr_ptr);
ret = io_prep_rw_pi(req, rw, ddir, attr_ptr, attr_type_mask);
}
return ret;
}
int io_prep_read(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
return io_prep_rw(req, sqe, ITER_DEST, true);
}
int io_prep_write(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
return io_prep_rw(req, sqe, ITER_SOURCE, true);
}
static int io_prep_rwv(struct io_kiocb *req, const struct io_uring_sqe *sqe,
int ddir)
{
const bool do_import = !(req->flags & REQ_F_BUFFER_SELECT);
int ret;
ret = io_prep_rw(req, sqe, ddir, do_import);
if (unlikely(ret))
return ret;
if (do_import)
return 0;
/*
* Have to do this validation here, as this is in io_read() rw->len
* might have chanaged due to buffer selection
*/
return io_iov_buffer_select_prep(req);
}
int io_prep_readv(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
return io_prep_rwv(req, sqe, ITER_DEST);
}
int io_prep_writev(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
return io_prep_rwv(req, sqe, ITER_SOURCE);
}
static int io_prep_rw_fixed(struct io_kiocb *req, const struct io_uring_sqe *sqe,
int ddir)
{
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
struct io_ring_ctx *ctx = req->ctx;
io_uring/rsrc: get rid of per-ring io_rsrc_node list Work in progress, but get rid of the per-ring serialization of resource nodes, like registered buffers and files. Main issue here is that one node can otherwise hold up a bunch of other nodes from getting freed, which is especially a problem for file resource nodes and networked workloads where some descriptors may not see activity in a long time. As an example, instantiate an io_uring ring fd and create a sparse registered file table. Even 2 will do. Then create a socket and register it as fixed file 0, F0. The number of open files in the app is now 5, with 0/1/2 being the usual stdin/out/err, 3 being the ring fd, and 4 being the socket. Register this socket (eg "the listener") in slot 0 of the registered file table. Now add an operation on the socket that uses slot 0. Finally, loop N times, where each loop creates a new socket, registers said socket as a file, then unregisters the socket, and finally closes the socket. This is roughly similar to what a basic accept loop would look like. At the end of this loop, it's not unreasonable to expect that there would still be 5 open files. Each socket created and registered in the loop is also unregistered and closed. But since the listener socket registered first still has references to its resource node due to still being active, each subsequent socket unregistration is stuck behind it for reclaim. Hence 5 + N files are still open at that point, where N is awaiting the final put held up by the listener socket. Rewrite the io_rsrc_node handling to NOT rely on serialization. Struct io_kiocb now gets explicit resource nodes assigned, with each holding a reference to the parent node. A parent node is either of type FILE or BUFFER, which are the two types of nodes that exist. A request can have two nodes assigned, if it's using both registered files and buffers. Since request issue and task_work completion is both under the ring private lock, no atomics are needed to handle these references. It's a simple unlocked inc/dec. As before, the registered buffer or file table each hold a reference as well to the registered nodes. Final put of the node will remove the node and free the underlying resource, eg unmap the buffer or put the file. Outside of removing the stall in resource reclaim described above, it has the following advantages: 1) It's a lot simpler than the previous scheme, and easier to follow. No need to specific quiesce handling anymore. 2) There are no resource node allocations in the fast path, all of that happens at resource registration time. 3) The structs related to resource handling can all get simplified quite a bit, like io_rsrc_node and io_rsrc_data. io_rsrc_put can go away completely. 4) Handling of resource tags is much simpler, and doesn't require persistent storage as it can simply get assigned up front at registration time. Just copy them in one-by-one at registration time and assign to the resource node. The only real downside is that a request is now explicitly limited to pinning 2 resources, one file and one buffer, where before just assigning a resource node to a request would pin all of them. The upside is that it's easier to follow now, as an individual resource is explicitly referenced and assigned to the request. With this in place, the above mentioned example will be using exactly 5 files at the end of the loop, not N. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-10-26 01:27:39 +00:00
struct io_rsrc_node *node;
struct io_async_rw *io;
int ret;
ret = io_prep_rw(req, sqe, ddir, false);
if (unlikely(ret))
return ret;
node = io_rsrc_node_lookup(&ctx->buf_table, req->buf_index);
if (!node)
return -EFAULT;
io_req_assign_buf_node(req, node);
io = req->async_data;
io_uring/rsrc: get rid of per-ring io_rsrc_node list Work in progress, but get rid of the per-ring serialization of resource nodes, like registered buffers and files. Main issue here is that one node can otherwise hold up a bunch of other nodes from getting freed, which is especially a problem for file resource nodes and networked workloads where some descriptors may not see activity in a long time. As an example, instantiate an io_uring ring fd and create a sparse registered file table. Even 2 will do. Then create a socket and register it as fixed file 0, F0. The number of open files in the app is now 5, with 0/1/2 being the usual stdin/out/err, 3 being the ring fd, and 4 being the socket. Register this socket (eg "the listener") in slot 0 of the registered file table. Now add an operation on the socket that uses slot 0. Finally, loop N times, where each loop creates a new socket, registers said socket as a file, then unregisters the socket, and finally closes the socket. This is roughly similar to what a basic accept loop would look like. At the end of this loop, it's not unreasonable to expect that there would still be 5 open files. Each socket created and registered in the loop is also unregistered and closed. But since the listener socket registered first still has references to its resource node due to still being active, each subsequent socket unregistration is stuck behind it for reclaim. Hence 5 + N files are still open at that point, where N is awaiting the final put held up by the listener socket. Rewrite the io_rsrc_node handling to NOT rely on serialization. Struct io_kiocb now gets explicit resource nodes assigned, with each holding a reference to the parent node. A parent node is either of type FILE or BUFFER, which are the two types of nodes that exist. A request can have two nodes assigned, if it's using both registered files and buffers. Since request issue and task_work completion is both under the ring private lock, no atomics are needed to handle these references. It's a simple unlocked inc/dec. As before, the registered buffer or file table each hold a reference as well to the registered nodes. Final put of the node will remove the node and free the underlying resource, eg unmap the buffer or put the file. Outside of removing the stall in resource reclaim described above, it has the following advantages: 1) It's a lot simpler than the previous scheme, and easier to follow. No need to specific quiesce handling anymore. 2) There are no resource node allocations in the fast path, all of that happens at resource registration time. 3) The structs related to resource handling can all get simplified quite a bit, like io_rsrc_node and io_rsrc_data. io_rsrc_put can go away completely. 4) Handling of resource tags is much simpler, and doesn't require persistent storage as it can simply get assigned up front at registration time. Just copy them in one-by-one at registration time and assign to the resource node. The only real downside is that a request is now explicitly limited to pinning 2 resources, one file and one buffer, where before just assigning a resource node to a request would pin all of them. The upside is that it's easier to follow now, as an individual resource is explicitly referenced and assigned to the request. With this in place, the above mentioned example will be using exactly 5 files at the end of the loop, not N. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-10-26 01:27:39 +00:00
ret = io_import_fixed(ddir, &io->iter, node->buf, rw->addr, rw->len);
iov_iter_save_state(&io->iter, &io->iter_state);
return ret;
}
int io_prep_read_fixed(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
return io_prep_rw_fixed(req, sqe, ITER_DEST);
}
int io_prep_write_fixed(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
return io_prep_rw_fixed(req, sqe, ITER_SOURCE);
}
/*
* Multishot read is prepared just like a normal read/write request, only
* difference is that we set the MULTISHOT flag.
*/
int io_read_mshot_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
int ret;
/* must be used with provided buffers */
if (!(req->flags & REQ_F_BUFFER_SELECT))
return -EINVAL;
ret = io_prep_rw(req, sqe, ITER_DEST, false);
if (unlikely(ret))
return ret;
if (rw->addr || rw->len)
return -EINVAL;
req->flags |= REQ_F_APOLL_MULTISHOT;
return 0;
}
void io_readv_writev_cleanup(struct io_kiocb *req)
{
io_rw_iovec_free(req->async_data);
}
static inline loff_t *io_kiocb_update_pos(struct io_kiocb *req)
{
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
if (rw->kiocb.ki_pos != -1)
return &rw->kiocb.ki_pos;
if (!(req->file->f_mode & FMODE_STREAM)) {
req->flags |= REQ_F_CUR_POS;
rw->kiocb.ki_pos = req->file->f_pos;
return &rw->kiocb.ki_pos;
}
rw->kiocb.ki_pos = 0;
return NULL;
}
#ifdef CONFIG_BLOCK
static void io_resubmit_prep(struct io_kiocb *req)
{
struct io_async_rw *io = req->async_data;
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
io_meta_restore(io, &rw->kiocb);
iov_iter_restore(&io->iter, &io->iter_state);
}
static bool io_rw_should_reissue(struct io_kiocb *req)
{
umode_t mode = file_inode(req->file)->i_mode;
struct io_ring_ctx *ctx = req->ctx;
if (!S_ISBLK(mode) && !S_ISREG(mode))
return false;
if ((req->flags & REQ_F_NOWAIT) || (io_wq_current_is_worker() &&
!(ctx->flags & IORING_SETUP_IOPOLL)))
return false;
/*
* If ref is dying, we might be running poll reap from the exit work.
* Don't attempt to reissue from that path, just let it fail with
* -EAGAIN.
*/
if (percpu_ref_is_dying(&ctx->refs))
return false;
/*
* Play it safe and assume not safe to re-import and reissue if we're
* not in the original thread group (or in task context).
*/
if (!same_thread_group(req->tctx->task, current) || !in_task())
return false;
return true;
}
#else
static void io_resubmit_prep(struct io_kiocb *req)
{
}
static bool io_rw_should_reissue(struct io_kiocb *req)
{
return false;
}
#endif
static void io_req_end_write(struct io_kiocb *req)
{
if (req->flags & REQ_F_ISREG) {
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
kiocb_end_write(&rw->kiocb);
}
}
/*
* Trigger the notifications after having done some IO, and finish the write
* accounting, if any.
*/
static void io_req_io_end(struct io_kiocb *req)
{
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
if (rw->kiocb.ki_flags & IOCB_WRITE) {
io_req_end_write(req);
fsnotify_modify(req->file);
} else {
fsnotify_access(req->file);
}
}
static bool __io_complete_rw_common(struct io_kiocb *req, long res)
{
if (unlikely(res != req->cqe.res)) {
if (res == -EAGAIN && io_rw_should_reissue(req)) {
/*
* Reissue will start accounting again, finish the
* current cycle.
*/
io_req_io_end(req);
req->flags |= REQ_F_REISSUE | REQ_F_BL_NO_RECYCLE;
return true;
}
req_set_fail(req);
req->cqe.res = res;
}
return false;
}
static inline int io_fixup_rw_res(struct io_kiocb *req, long res)
{
struct io_async_rw *io = req->async_data;
/* add previously done IO, if any */
if (req_has_async_data(req) && io->bytes_done > 0) {
if (res < 0)
res = io->bytes_done;
else
res += io->bytes_done;
}
return res;
}
void io_req_rw_complete(struct io_kiocb *req, struct io_tw_state *ts)
io_uring/rw: defer fsnotify calls to task context We can't call these off the kiocb completion as that might be off soft/hard irq context. Defer the calls to when we process the task_work for this request. That avoids valid complaints like: stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.0.0-rc6-syzkaller-00321-g105a36f3694e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_usage_bug kernel/locking/lockdep.c:3961 [inline] valid_state kernel/locking/lockdep.c:3973 [inline] mark_lock_irq kernel/locking/lockdep.c:4176 [inline] mark_lock.part.0.cold+0x18/0xd8 kernel/locking/lockdep.c:4632 mark_lock kernel/locking/lockdep.c:4596 [inline] mark_usage kernel/locking/lockdep.c:4527 [inline] __lock_acquire+0x11d9/0x56d0 kernel/locking/lockdep.c:5007 lock_acquire kernel/locking/lockdep.c:5666 [inline] lock_acquire+0x1ab/0x570 kernel/locking/lockdep.c:5631 __fs_reclaim_acquire mm/page_alloc.c:4674 [inline] fs_reclaim_acquire+0x115/0x160 mm/page_alloc.c:4688 might_alloc include/linux/sched/mm.h:271 [inline] slab_pre_alloc_hook mm/slab.h:700 [inline] slab_alloc mm/slab.c:3278 [inline] __kmem_cache_alloc_lru mm/slab.c:3471 [inline] kmem_cache_alloc+0x39/0x520 mm/slab.c:3491 fanotify_alloc_fid_event fs/notify/fanotify/fanotify.c:580 [inline] fanotify_alloc_event fs/notify/fanotify/fanotify.c:813 [inline] fanotify_handle_event+0x1130/0x3f40 fs/notify/fanotify/fanotify.c:948 send_to_group fs/notify/fsnotify.c:360 [inline] fsnotify+0xafb/0x1680 fs/notify/fsnotify.c:570 __fsnotify_parent+0x62f/0xa60 fs/notify/fsnotify.c:230 fsnotify_parent include/linux/fsnotify.h:77 [inline] fsnotify_file include/linux/fsnotify.h:99 [inline] fsnotify_access include/linux/fsnotify.h:309 [inline] __io_complete_rw_common+0x485/0x720 io_uring/rw.c:195 io_complete_rw+0x1a/0x1f0 io_uring/rw.c:228 iomap_dio_complete_work fs/iomap/direct-io.c:144 [inline] iomap_dio_bio_end_io+0x438/0x5e0 fs/iomap/direct-io.c:178 bio_endio+0x5f9/0x780 block/bio.c:1564 req_bio_endio block/blk-mq.c:695 [inline] blk_update_request+0x3fc/0x1300 block/blk-mq.c:825 scsi_end_request+0x7a/0x9a0 drivers/scsi/scsi_lib.c:541 scsi_io_completion+0x173/0x1f70 drivers/scsi/scsi_lib.c:971 scsi_complete+0x122/0x3b0 drivers/scsi/scsi_lib.c:1438 blk_complete_reqs+0xad/0xe0 block/blk-mq.c:1022 __do_softirq+0x1d3/0x9c6 kernel/softirq.c:571 invoke_softirq kernel/softirq.c:445 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:650 irq_exit_rcu+0x5/0x20 kernel/softirq.c:662 common_interrupt+0xa9/0xc0 arch/x86/kernel/irq.c:240 Fixes: f63cf5192fe3 ("io_uring: ensure that fsnotify is always called") Link: https://lore.kernel.org/all/20220929135627.ykivmdks2w5vzrwg@quack3/ Reported-by: syzbot+dfcc5f4da15868df7d4d@syzkaller.appspotmail.com Reported-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-29 16:57:05 +00:00
{
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
struct kiocb *kiocb = &rw->kiocb;
if ((kiocb->ki_flags & IOCB_DIO_CALLER_COMP) && kiocb->dio_complete) {
long res = kiocb->dio_complete(rw->kiocb.private);
io_req_set_res(req, io_fixup_rw_res(req, res), 0);
}
io_req_io_end(req);
if (req->flags & (REQ_F_BUFFER_SELECTED|REQ_F_BUFFER_RING))
req->cqe.flags |= io_put_kbuf(req, req->cqe.res, 0);
io_req_rw_cleanup(req, 0);
io_req_task_complete(req, ts);
io_uring/rw: defer fsnotify calls to task context We can't call these off the kiocb completion as that might be off soft/hard irq context. Defer the calls to when we process the task_work for this request. That avoids valid complaints like: stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.0.0-rc6-syzkaller-00321-g105a36f3694e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_usage_bug kernel/locking/lockdep.c:3961 [inline] valid_state kernel/locking/lockdep.c:3973 [inline] mark_lock_irq kernel/locking/lockdep.c:4176 [inline] mark_lock.part.0.cold+0x18/0xd8 kernel/locking/lockdep.c:4632 mark_lock kernel/locking/lockdep.c:4596 [inline] mark_usage kernel/locking/lockdep.c:4527 [inline] __lock_acquire+0x11d9/0x56d0 kernel/locking/lockdep.c:5007 lock_acquire kernel/locking/lockdep.c:5666 [inline] lock_acquire+0x1ab/0x570 kernel/locking/lockdep.c:5631 __fs_reclaim_acquire mm/page_alloc.c:4674 [inline] fs_reclaim_acquire+0x115/0x160 mm/page_alloc.c:4688 might_alloc include/linux/sched/mm.h:271 [inline] slab_pre_alloc_hook mm/slab.h:700 [inline] slab_alloc mm/slab.c:3278 [inline] __kmem_cache_alloc_lru mm/slab.c:3471 [inline] kmem_cache_alloc+0x39/0x520 mm/slab.c:3491 fanotify_alloc_fid_event fs/notify/fanotify/fanotify.c:580 [inline] fanotify_alloc_event fs/notify/fanotify/fanotify.c:813 [inline] fanotify_handle_event+0x1130/0x3f40 fs/notify/fanotify/fanotify.c:948 send_to_group fs/notify/fsnotify.c:360 [inline] fsnotify+0xafb/0x1680 fs/notify/fsnotify.c:570 __fsnotify_parent+0x62f/0xa60 fs/notify/fsnotify.c:230 fsnotify_parent include/linux/fsnotify.h:77 [inline] fsnotify_file include/linux/fsnotify.h:99 [inline] fsnotify_access include/linux/fsnotify.h:309 [inline] __io_complete_rw_common+0x485/0x720 io_uring/rw.c:195 io_complete_rw+0x1a/0x1f0 io_uring/rw.c:228 iomap_dio_complete_work fs/iomap/direct-io.c:144 [inline] iomap_dio_bio_end_io+0x438/0x5e0 fs/iomap/direct-io.c:178 bio_endio+0x5f9/0x780 block/bio.c:1564 req_bio_endio block/blk-mq.c:695 [inline] blk_update_request+0x3fc/0x1300 block/blk-mq.c:825 scsi_end_request+0x7a/0x9a0 drivers/scsi/scsi_lib.c:541 scsi_io_completion+0x173/0x1f70 drivers/scsi/scsi_lib.c:971 scsi_complete+0x122/0x3b0 drivers/scsi/scsi_lib.c:1438 blk_complete_reqs+0xad/0xe0 block/blk-mq.c:1022 __do_softirq+0x1d3/0x9c6 kernel/softirq.c:571 invoke_softirq kernel/softirq.c:445 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:650 irq_exit_rcu+0x5/0x20 kernel/softirq.c:662 common_interrupt+0xa9/0xc0 arch/x86/kernel/irq.c:240 Fixes: f63cf5192fe3 ("io_uring: ensure that fsnotify is always called") Link: https://lore.kernel.org/all/20220929135627.ykivmdks2w5vzrwg@quack3/ Reported-by: syzbot+dfcc5f4da15868df7d4d@syzkaller.appspotmail.com Reported-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-29 16:57:05 +00:00
}
static void io_complete_rw(struct kiocb *kiocb, long res)
{
struct io_rw *rw = container_of(kiocb, struct io_rw, kiocb);
struct io_kiocb *req = cmd_to_io_kiocb(rw);
if (!kiocb->dio_complete || !(kiocb->ki_flags & IOCB_DIO_CALLER_COMP)) {
if (__io_complete_rw_common(req, res))
return;
io_req_set_res(req, io_fixup_rw_res(req, res), 0);
}
io_uring/rw: defer fsnotify calls to task context We can't call these off the kiocb completion as that might be off soft/hard irq context. Defer the calls to when we process the task_work for this request. That avoids valid complaints like: stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.0.0-rc6-syzkaller-00321-g105a36f3694e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_usage_bug kernel/locking/lockdep.c:3961 [inline] valid_state kernel/locking/lockdep.c:3973 [inline] mark_lock_irq kernel/locking/lockdep.c:4176 [inline] mark_lock.part.0.cold+0x18/0xd8 kernel/locking/lockdep.c:4632 mark_lock kernel/locking/lockdep.c:4596 [inline] mark_usage kernel/locking/lockdep.c:4527 [inline] __lock_acquire+0x11d9/0x56d0 kernel/locking/lockdep.c:5007 lock_acquire kernel/locking/lockdep.c:5666 [inline] lock_acquire+0x1ab/0x570 kernel/locking/lockdep.c:5631 __fs_reclaim_acquire mm/page_alloc.c:4674 [inline] fs_reclaim_acquire+0x115/0x160 mm/page_alloc.c:4688 might_alloc include/linux/sched/mm.h:271 [inline] slab_pre_alloc_hook mm/slab.h:700 [inline] slab_alloc mm/slab.c:3278 [inline] __kmem_cache_alloc_lru mm/slab.c:3471 [inline] kmem_cache_alloc+0x39/0x520 mm/slab.c:3491 fanotify_alloc_fid_event fs/notify/fanotify/fanotify.c:580 [inline] fanotify_alloc_event fs/notify/fanotify/fanotify.c:813 [inline] fanotify_handle_event+0x1130/0x3f40 fs/notify/fanotify/fanotify.c:948 send_to_group fs/notify/fsnotify.c:360 [inline] fsnotify+0xafb/0x1680 fs/notify/fsnotify.c:570 __fsnotify_parent+0x62f/0xa60 fs/notify/fsnotify.c:230 fsnotify_parent include/linux/fsnotify.h:77 [inline] fsnotify_file include/linux/fsnotify.h:99 [inline] fsnotify_access include/linux/fsnotify.h:309 [inline] __io_complete_rw_common+0x485/0x720 io_uring/rw.c:195 io_complete_rw+0x1a/0x1f0 io_uring/rw.c:228 iomap_dio_complete_work fs/iomap/direct-io.c:144 [inline] iomap_dio_bio_end_io+0x438/0x5e0 fs/iomap/direct-io.c:178 bio_endio+0x5f9/0x780 block/bio.c:1564 req_bio_endio block/blk-mq.c:695 [inline] blk_update_request+0x3fc/0x1300 block/blk-mq.c:825 scsi_end_request+0x7a/0x9a0 drivers/scsi/scsi_lib.c:541 scsi_io_completion+0x173/0x1f70 drivers/scsi/scsi_lib.c:971 scsi_complete+0x122/0x3b0 drivers/scsi/scsi_lib.c:1438 blk_complete_reqs+0xad/0xe0 block/blk-mq.c:1022 __do_softirq+0x1d3/0x9c6 kernel/softirq.c:571 invoke_softirq kernel/softirq.c:445 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:650 irq_exit_rcu+0x5/0x20 kernel/softirq.c:662 common_interrupt+0xa9/0xc0 arch/x86/kernel/irq.c:240 Fixes: f63cf5192fe3 ("io_uring: ensure that fsnotify is always called") Link: https://lore.kernel.org/all/20220929135627.ykivmdks2w5vzrwg@quack3/ Reported-by: syzbot+dfcc5f4da15868df7d4d@syzkaller.appspotmail.com Reported-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-29 16:57:05 +00:00
req->io_task_work.func = io_req_rw_complete;
__io_req_task_work_add(req, IOU_F_TWQ_LAZY_WAKE);
}
static void io_complete_rw_iopoll(struct kiocb *kiocb, long res)
{
struct io_rw *rw = container_of(kiocb, struct io_rw, kiocb);
struct io_kiocb *req = cmd_to_io_kiocb(rw);
if (kiocb->ki_flags & IOCB_WRITE)
io_req_end_write(req);
if (unlikely(res != req->cqe.res)) {
if (res == -EAGAIN && io_rw_should_reissue(req)) {
req->flags |= REQ_F_REISSUE | REQ_F_BL_NO_RECYCLE;
return;
}
req->cqe.res = res;
}
/* order with io_iopoll_complete() checking ->iopoll_completed */
smp_store_release(&req->iopoll_completed, 1);
}
static inline void io_rw_done(struct kiocb *kiocb, ssize_t ret)
{
/* IO was queued async, completion will happen later */
if (ret == -EIOCBQUEUED)
return;
/* transform internal restart error codes */
if (unlikely(ret < 0)) {
switch (ret) {
case -ERESTARTSYS:
case -ERESTARTNOINTR:
case -ERESTARTNOHAND:
case -ERESTART_RESTARTBLOCK:
/*
* We can't just restart the syscall, since previously
* submitted sqes may already be in progress. Just fail
* this IO with EINTR.
*/
ret = -EINTR;
break;
}
}
INDIRECT_CALL_2(kiocb->ki_complete, io_complete_rw_iopoll,
io_complete_rw, kiocb, ret);
}
static int kiocb_done(struct io_kiocb *req, ssize_t ret,
unsigned int issue_flags)
{
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
unsigned final_ret = io_fixup_rw_res(req, ret);
if (ret >= 0 && req->flags & REQ_F_CUR_POS)
req->file->f_pos = rw->kiocb.ki_pos;
if (ret >= 0 && (rw->kiocb.ki_complete == io_complete_rw)) {
if (!__io_complete_rw_common(req, ret)) {
/*
* Safe to call io_end from here as we're inline
* from the submission path.
*/
io_req_io_end(req);
io_req_set_res(req, final_ret,
io_put_kbuf(req, ret, issue_flags));
io_req_rw_cleanup(req, issue_flags);
return IOU_OK;
}
} else {
io_rw_done(&rw->kiocb, ret);
}
if (req->flags & REQ_F_REISSUE) {
req->flags &= ~REQ_F_REISSUE;
io_resubmit_prep(req);
return -EAGAIN;
}
return IOU_ISSUE_SKIP_COMPLETE;
}
static inline loff_t *io_kiocb_ppos(struct kiocb *kiocb)
{
return (kiocb->ki_filp->f_mode & FMODE_STREAM) ? NULL : &kiocb->ki_pos;
}
/*
* For files that don't have ->read_iter() and ->write_iter(), handle them
* by looping over ->read() or ->write() manually.
*/
static ssize_t loop_rw_iter(int ddir, struct io_rw *rw, struct iov_iter *iter)
{
struct kiocb *kiocb = &rw->kiocb;
struct file *file = kiocb->ki_filp;
ssize_t ret = 0;
loff_t *ppos;
/*
* Don't support polled IO through this interface, and we can't
* support non-blocking either. For the latter, this just causes
* the kiocb to be handled from an async context.
*/
if (kiocb->ki_flags & IOCB_HIPRI)
return -EOPNOTSUPP;
if ((kiocb->ki_flags & IOCB_NOWAIT) &&
!(kiocb->ki_filp->f_flags & O_NONBLOCK))
return -EAGAIN;
ppos = io_kiocb_ppos(kiocb);
while (iov_iter_count(iter)) {
void __user *addr;
size_t len;
ssize_t nr;
if (iter_is_ubuf(iter)) {
addr = iter->ubuf + iter->iov_offset;
len = iov_iter_count(iter);
} else if (!iov_iter_is_bvec(iter)) {
addr = iter_iov_addr(iter);
len = iter_iov_len(iter);
} else {
addr = u64_to_user_ptr(rw->addr);
len = rw->len;
}
if (ddir == READ)
nr = file->f_op->read(file, addr, len, ppos);
else
nr = file->f_op->write(file, addr, len, ppos);
if (nr < 0) {
if (!ret)
ret = nr;
break;
}
ret += nr;
if (!iov_iter_is_bvec(iter)) {
iov_iter_advance(iter, nr);
} else {
rw->addr += nr;
rw->len -= nr;
if (!rw->len)
break;
}
if (nr != len)
break;
}
return ret;
}
/*
* This is our waitqueue callback handler, registered through __folio_lock_async()
* when we initially tried to do the IO with the iocb armed our waitqueue.
* This gets called when the page is unlocked, and we generally expect that to
* happen when the page IO is completed and the page is now uptodate. This will
* queue a task_work based retry of the operation, attempting to copy the data
* again. If the latter fails because the page was NOT uptodate, then we will
* do a thread based blocking retry of the operation. That's the unexpected
* slow path.
*/
static int io_async_buf_func(struct wait_queue_entry *wait, unsigned mode,
int sync, void *arg)
{
struct wait_page_queue *wpq;
struct io_kiocb *req = wait->private;
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
struct wait_page_key *key = arg;
wpq = container_of(wait, struct wait_page_queue, wait);
if (!wake_page_match(wpq, key))
return 0;
rw->kiocb.ki_flags &= ~IOCB_WAITQ;
list_del_init(&wait->entry);
io_req_task_queue(req);
return 1;
}
/*
* This controls whether a given IO request should be armed for async page
* based retry. If we return false here, the request is handed to the async
* worker threads for retry. If we're doing buffered reads on a regular file,
* we prepare a private wait_page_queue entry and retry the operation. This
* will either succeed because the page is now uptodate and unlocked, or it
* will register a callback when the page is unlocked at IO completion. Through
* that callback, io_uring uses task_work to setup a retry of the operation.
* That retry will attempt the buffered read again. The retry will generally
* succeed, or in rare cases where it fails, we then fall back to using the
* async worker threads for a blocking retry.
*/
static bool io_rw_should_retry(struct io_kiocb *req)
{
struct io_async_rw *io = req->async_data;
struct wait_page_queue *wait = &io->wpq;
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
struct kiocb *kiocb = &rw->kiocb;
/*
* Never retry for NOWAIT or a request with metadata, we just complete
* with -EAGAIN.
*/
if (req->flags & (REQ_F_NOWAIT | REQ_F_HAS_METADATA))
return false;
/* Only for buffered IO */
if (kiocb->ki_flags & (IOCB_DIRECT | IOCB_HIPRI))
return false;
/*
* just use poll if we can, and don't attempt if the fs doesn't
* support callback based unlocks
*/
if (io_file_can_poll(req) ||
!(req->file->f_op->fop_flags & FOP_BUFFER_RASYNC))
return false;
wait->wait.func = io_async_buf_func;
wait->wait.private = req;
wait->wait.flags = 0;
INIT_LIST_HEAD(&wait->wait.entry);
kiocb->ki_flags |= IOCB_WAITQ;
kiocb->ki_flags &= ~IOCB_NOWAIT;
kiocb->ki_waitq = wait;
return true;
}
static inline int io_iter_do_read(struct io_rw *rw, struct iov_iter *iter)
{
struct file *file = rw->kiocb.ki_filp;
if (likely(file->f_op->read_iter))
return file->f_op->read_iter(&rw->kiocb, iter);
else if (file->f_op->read)
return loop_rw_iter(READ, rw, iter);
else
return -EINVAL;
}
static bool need_complete_io(struct io_kiocb *req)
{
return req->flags & REQ_F_ISREG ||
S_ISBLK(file_inode(req->file)->i_mode);
}
fs: Initial atomic write support An atomic write is a write issued with torn-write protection, meaning that for a power failure or any other hardware failure, all or none of the data from the write will be stored, but never a mix of old and new data. Userspace may add flag RWF_ATOMIC to pwritev2() to indicate that the write is to be issued with torn-write prevention, according to special alignment and length rules. For any syscall interface utilizing struct iocb, add IOCB_ATOMIC for iocb->ki_flags field to indicate the same. A call to statx will give the relevant atomic write info for a file: - atomic_write_unit_min - atomic_write_unit_max - atomic_write_segments_max Both min and max values must be a power-of-2. Applications can avail of atomic write feature by ensuring that the total length of a write is a power-of-2 in size and also sized between atomic_write_unit_min and atomic_write_unit_max, inclusive. Applications must ensure that the write is at a naturally-aligned offset in the file wrt the total write length. The value in atomic_write_segments_max indicates the upper limit for IOV_ITER iovcnt. Add file mode flag FMODE_CAN_ATOMIC_WRITE, so files which do not have the flag set will have RWF_ATOMIC rejected and not just ignored. Add a type argument to kiocb_set_rw_flags() to allows reads which have RWF_ATOMIC set to be rejected. Helper function generic_atomic_write_valid() can be used by FSes to verify compliant writes. There we check for iov_iter type is for ubuf, which implies iovcnt==1 for pwritev2(), which is an initial restriction for atomic_write_segments_max. Initially the only user will be bdev file operations write handler. We will rely on the block BIO submission path to ensure write sizes are compliant for the bdev, so we don't need to check atomic writes sizes yet. Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com> jpg: merge into single patch and much rewrite Acked-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20240620125359.2684798-4-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-20 12:53:52 +00:00
static int io_rw_init_file(struct io_kiocb *req, fmode_t mode, int rw_type)
{
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
struct kiocb *kiocb = &rw->kiocb;
struct io_ring_ctx *ctx = req->ctx;
struct file *file = req->file;
int ret;
if (unlikely(!(file->f_mode & mode)))
return -EBADF;
if (!(req->flags & REQ_F_FIXED_FILE))
req->flags |= io_file_get_flags(file);
kiocb->ki_flags = file->f_iocb_flags;
fs: Initial atomic write support An atomic write is a write issued with torn-write protection, meaning that for a power failure or any other hardware failure, all or none of the data from the write will be stored, but never a mix of old and new data. Userspace may add flag RWF_ATOMIC to pwritev2() to indicate that the write is to be issued with torn-write prevention, according to special alignment and length rules. For any syscall interface utilizing struct iocb, add IOCB_ATOMIC for iocb->ki_flags field to indicate the same. A call to statx will give the relevant atomic write info for a file: - atomic_write_unit_min - atomic_write_unit_max - atomic_write_segments_max Both min and max values must be a power-of-2. Applications can avail of atomic write feature by ensuring that the total length of a write is a power-of-2 in size and also sized between atomic_write_unit_min and atomic_write_unit_max, inclusive. Applications must ensure that the write is at a naturally-aligned offset in the file wrt the total write length. The value in atomic_write_segments_max indicates the upper limit for IOV_ITER iovcnt. Add file mode flag FMODE_CAN_ATOMIC_WRITE, so files which do not have the flag set will have RWF_ATOMIC rejected and not just ignored. Add a type argument to kiocb_set_rw_flags() to allows reads which have RWF_ATOMIC set to be rejected. Helper function generic_atomic_write_valid() can be used by FSes to verify compliant writes. There we check for iov_iter type is for ubuf, which implies iovcnt==1 for pwritev2(), which is an initial restriction for atomic_write_segments_max. Initially the only user will be bdev file operations write handler. We will rely on the block BIO submission path to ensure write sizes are compliant for the bdev, so we don't need to check atomic writes sizes yet. Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com> jpg: merge into single patch and much rewrite Acked-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20240620125359.2684798-4-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-20 12:53:52 +00:00
ret = kiocb_set_rw_flags(kiocb, rw->flags, rw_type);
if (unlikely(ret))
return ret;
kiocb->ki_flags |= IOCB_ALLOC_CACHE;
/*
* If the file is marked O_NONBLOCK, still allow retry for it if it
* supports async. Otherwise it's impossible to use O_NONBLOCK files
* reliably. If not, or it IOCB_NOWAIT is set, don't retry.
*/
if (kiocb->ki_flags & IOCB_NOWAIT ||
((file->f_flags & O_NONBLOCK && !(req->flags & REQ_F_SUPPORT_NOWAIT))))
req->flags |= REQ_F_NOWAIT;
if (ctx->flags & IORING_SETUP_IOPOLL) {
if (!(kiocb->ki_flags & IOCB_DIRECT) || !file->f_op->iopoll)
return -EOPNOTSUPP;
kiocb->private = NULL;
kiocb->ki_flags |= IOCB_HIPRI;
kiocb->ki_complete = io_complete_rw_iopoll;
req->iopoll_completed = 0;
if (ctx->flags & IORING_SETUP_HYBRID_IOPOLL) {
/* make sure every req only blocks once*/
req->flags &= ~REQ_F_IOPOLL_STATE;
req->iopoll_start = ktime_get_ns();
}
} else {
if (kiocb->ki_flags & IOCB_HIPRI)
return -EINVAL;
kiocb->ki_complete = io_complete_rw;
}
if (req->flags & REQ_F_HAS_METADATA) {
struct io_async_rw *io = req->async_data;
/*
* We have a union of meta fields with wpq used for buffered-io
* in io_async_rw, so fail it here.
*/
if (!(req->file->f_flags & O_DIRECT))
return -EOPNOTSUPP;
kiocb->ki_flags |= IOCB_HAS_METADATA;
kiocb->private = &io->meta;
}
return 0;
}
static int __io_read(struct io_kiocb *req, unsigned int issue_flags)
{
bool force_nonblock = issue_flags & IO_URING_F_NONBLOCK;
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
struct io_async_rw *io = req->async_data;
struct kiocb *kiocb = &rw->kiocb;
ssize_t ret;
loff_t *ppos;
if (io_do_buffer_select(req)) {
ret = io_import_iovec(ITER_DEST, req, io, issue_flags);
if (unlikely(ret < 0))
return ret;
}
fs: Initial atomic write support An atomic write is a write issued with torn-write protection, meaning that for a power failure or any other hardware failure, all or none of the data from the write will be stored, but never a mix of old and new data. Userspace may add flag RWF_ATOMIC to pwritev2() to indicate that the write is to be issued with torn-write prevention, according to special alignment and length rules. For any syscall interface utilizing struct iocb, add IOCB_ATOMIC for iocb->ki_flags field to indicate the same. A call to statx will give the relevant atomic write info for a file: - atomic_write_unit_min - atomic_write_unit_max - atomic_write_segments_max Both min and max values must be a power-of-2. Applications can avail of atomic write feature by ensuring that the total length of a write is a power-of-2 in size and also sized between atomic_write_unit_min and atomic_write_unit_max, inclusive. Applications must ensure that the write is at a naturally-aligned offset in the file wrt the total write length. The value in atomic_write_segments_max indicates the upper limit for IOV_ITER iovcnt. Add file mode flag FMODE_CAN_ATOMIC_WRITE, so files which do not have the flag set will have RWF_ATOMIC rejected and not just ignored. Add a type argument to kiocb_set_rw_flags() to allows reads which have RWF_ATOMIC set to be rejected. Helper function generic_atomic_write_valid() can be used by FSes to verify compliant writes. There we check for iov_iter type is for ubuf, which implies iovcnt==1 for pwritev2(), which is an initial restriction for atomic_write_segments_max. Initially the only user will be bdev file operations write handler. We will rely on the block BIO submission path to ensure write sizes are compliant for the bdev, so we don't need to check atomic writes sizes yet. Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com> jpg: merge into single patch and much rewrite Acked-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20240620125359.2684798-4-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-20 12:53:52 +00:00
ret = io_rw_init_file(req, FMODE_READ, READ);
if (unlikely(ret))
return ret;
req->cqe.res = iov_iter_count(&io->iter);
if (force_nonblock) {
/* If the file doesn't support async, just async punt */
if (unlikely(!io_file_supports_nowait(req, EPOLLIN)))
return -EAGAIN;
kiocb->ki_flags |= IOCB_NOWAIT;
} else {
/* Ensure we clear previously set non-block flag */
kiocb->ki_flags &= ~IOCB_NOWAIT;
}
ppos = io_kiocb_update_pos(req);
ret = rw_verify_area(READ, req->file, ppos, req->cqe.res);
if (unlikely(ret))
return ret;
ret = io_iter_do_read(rw, &io->iter);
/*
* Some file systems like to return -EOPNOTSUPP for an IOCB_NOWAIT
* issue, even though they should be returning -EAGAIN. To be safe,
* retry from blocking context for either.
*/
if (ret == -EOPNOTSUPP && force_nonblock)
ret = -EAGAIN;
if (ret == -EAGAIN || (req->flags & REQ_F_REISSUE)) {
req->flags &= ~REQ_F_REISSUE;
/* If we can poll, just do that. */
if (io_file_can_poll(req))
return -EAGAIN;
/* IOPOLL retry should happen for io-wq threads */
if (!force_nonblock && !(req->ctx->flags & IORING_SETUP_IOPOLL))
goto done;
/* no retry on NONBLOCK nor RWF_NOWAIT */
if (req->flags & REQ_F_NOWAIT)
goto done;
ret = 0;
} else if (ret == -EIOCBQUEUED) {
return IOU_ISSUE_SKIP_COMPLETE;
} else if (ret == req->cqe.res || ret <= 0 || !force_nonblock ||
(req->flags & REQ_F_NOWAIT) || !need_complete_io(req)) {
/* read all, failed, already did sync or don't want to retry */
goto done;
}
/*
* Don't depend on the iter state matching what was consumed, or being
* untouched in case of error. Restore it and we'll advance it
* manually if we need to.
*/
iov_iter_restore(&io->iter, &io->iter_state);
io_meta_restore(io, kiocb);
do {
/*
* We end up here because of a partial read, either from
* above or inside this loop. Advance the iter by the bytes
* that were consumed.
*/
iov_iter_advance(&io->iter, ret);
if (!iov_iter_count(&io->iter))
break;
io->bytes_done += ret;
iov_iter_save_state(&io->iter, &io->iter_state);
/* if we can retry, do so with the callbacks armed */
if (!io_rw_should_retry(req)) {
kiocb->ki_flags &= ~IOCB_WAITQ;
return -EAGAIN;
}
req->cqe.res = iov_iter_count(&io->iter);
/*
* Now retry read with the IOCB_WAITQ parts set in the iocb. If
* we get -EIOCBQUEUED, then we'll get a notification when the
* desired page gets unlocked. We can also get a partial read
* here, and if we do, then just retry at the new offset.
*/
ret = io_iter_do_read(rw, &io->iter);
if (ret == -EIOCBQUEUED)
return IOU_ISSUE_SKIP_COMPLETE;
/* we got some bytes, but not all. retry. */
kiocb->ki_flags &= ~IOCB_WAITQ;
iov_iter_restore(&io->iter, &io->iter_state);
} while (ret > 0);
done:
/* it's faster to check here then delegate to kfree */
return ret;
}
int io_read(struct io_kiocb *req, unsigned int issue_flags)
{
int ret;
ret = __io_read(req, issue_flags);
if (ret >= 0)
return kiocb_done(req, ret, issue_flags);
return ret;
}
int io_read_mshot(struct io_kiocb *req, unsigned int issue_flags)
{
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
unsigned int cflags = 0;
int ret;
/*
* Multishot MUST be used on a pollable file
*/
if (!io_file_can_poll(req))
return -EBADFD;
ret = __io_read(req, issue_flags);
/*
* If we get -EAGAIN, recycle our buffer and just let normal poll
* handling arm it.
*/
if (ret == -EAGAIN) {
/*
* Reset rw->len to 0 again to avoid clamping future mshot
* reads, in case the buffer size varies.
*/
if (io_kbuf_recycle(req, issue_flags))
rw->len = 0;
if (issue_flags & IO_URING_F_MULTISHOT)
return IOU_ISSUE_SKIP_COMPLETE;
return -EAGAIN;
} else if (ret <= 0) {
io_kbuf_recycle(req, issue_flags);
if (ret < 0)
req_set_fail(req);
} else {
/*
* Any successful return value will keep the multishot read
* armed, if it's still set. Put our buffer and post a CQE. If
* we fail to post a CQE, or multishot is no longer set, then
* jump to the termination path. This request is then done.
*/
cflags = io_put_kbuf(req, ret, issue_flags);
rw->len = 0; /* similarly to above, reset len to 0 */
if (io_req_post_cqe(req, ret, cflags | IORING_CQE_F_MORE)) {
io_uring/rw: ensure poll based multishot read retries appropriately io_read_mshot() always relies on poll triggering retries, and this works fine as long as we do a retry per size of the buffer being read. The buffer size is given by the size of the buffer(s) in the given buffer group ID. But if we're reading less than what is available, then we don't always get to read everything that is available. For example, if the buffers available are 32 bytes and we have 64 bytes to read, then we'll correctly read the first 32 bytes and then wait for another poll trigger before we attempt the next read. This next poll trigger may never happen, in which case we just sit forever and never make progress, or it may trigger at some point in the future, and now we're just delivering the available data much later than we should have. io_read_mshot() could do retries itself, but that is wasteful as we'll be going through all of __io_read() again, and most likely in vain. Rather than do that, bump our poll reference count and have io_poll_check_events() do one more loop and check with vfs_poll() if we have more data to read. If we do, io_read_mshot() will get invoked again directly and we'll read the next chunk. io_poll_multishot_retry() must only get called from inside io_poll_issue(), which is our multishot retry handler, as we know we already "own" the request at this point. Cc: stable@vger.kernel.org Link: https://github.com/axboe/liburing/issues/1041 Fixes: fc68fcda0491 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-01-27 20:44:58 +00:00
if (issue_flags & IO_URING_F_MULTISHOT) {
/*
* Force retry, as we might have more data to
* be read and otherwise it won't get retried
* until (if ever) another poll is triggered.
*/
io_poll_multishot_retry(req);
return IOU_ISSUE_SKIP_COMPLETE;
io_uring/rw: ensure poll based multishot read retries appropriately io_read_mshot() always relies on poll triggering retries, and this works fine as long as we do a retry per size of the buffer being read. The buffer size is given by the size of the buffer(s) in the given buffer group ID. But if we're reading less than what is available, then we don't always get to read everything that is available. For example, if the buffers available are 32 bytes and we have 64 bytes to read, then we'll correctly read the first 32 bytes and then wait for another poll trigger before we attempt the next read. This next poll trigger may never happen, in which case we just sit forever and never make progress, or it may trigger at some point in the future, and now we're just delivering the available data much later than we should have. io_read_mshot() could do retries itself, but that is wasteful as we'll be going through all of __io_read() again, and most likely in vain. Rather than do that, bump our poll reference count and have io_poll_check_events() do one more loop and check with vfs_poll() if we have more data to read. If we do, io_read_mshot() will get invoked again directly and we'll read the next chunk. io_poll_multishot_retry() must only get called from inside io_poll_issue(), which is our multishot retry handler, as we know we already "own" the request at this point. Cc: stable@vger.kernel.org Link: https://github.com/axboe/liburing/issues/1041 Fixes: fc68fcda0491 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-01-27 20:44:58 +00:00
}
return -EAGAIN;
}
}
/*
* Either an error, or we've hit overflow posting the CQE. For any
* multishot request, hitting overflow will terminate it.
*/
io_req_set_res(req, ret, cflags);
io_req_rw_cleanup(req, issue_flags);
if (issue_flags & IO_URING_F_MULTISHOT)
return IOU_STOP_MULTISHOT;
return IOU_OK;
}
io_uring/rw: fix missing NOWAIT check for O_DIRECT start write When io_uring starts a write, it'll call kiocb_start_write() to bump the super block rwsem, preventing any freezes from happening while that write is in-flight. The freeze side will grab that rwsem for writing, excluding any new writers from happening and waiting for existing writes to finish. But io_uring unconditionally uses kiocb_start_write(), which will block if someone is currently attempting to freeze the mount point. This causes a deadlock where freeze is waiting for previous writes to complete, but the previous writes cannot complete, as the task that is supposed to complete them is blocked waiting on starting a new write. This results in the following stuck trace showing that dependency with the write blocked starting a new write: task:fio state:D stack:0 pid:886 tgid:886 ppid:876 Call trace: __switch_to+0x1d8/0x348 __schedule+0x8e8/0x2248 schedule+0x110/0x3f0 percpu_rwsem_wait+0x1e8/0x3f8 __percpu_down_read+0xe8/0x500 io_write+0xbb8/0xff8 io_issue_sqe+0x10c/0x1020 io_submit_sqes+0x614/0x2110 __arm64_sys_io_uring_enter+0x524/0x1038 invoke_syscall+0x74/0x268 el0_svc_common.constprop.0+0x160/0x238 do_el0_svc+0x44/0x60 el0_svc+0x44/0xb0 el0t_64_sync_handler+0x118/0x128 el0t_64_sync+0x168/0x170 INFO: task fsfreeze:7364 blocked for more than 15 seconds. Not tainted 6.12.0-rc5-00063-g76aaf945701c #7963 with the attempting freezer stuck trying to grab the rwsem: task:fsfreeze state:D stack:0 pid:7364 tgid:7364 ppid:995 Call trace: __switch_to+0x1d8/0x348 __schedule+0x8e8/0x2248 schedule+0x110/0x3f0 percpu_down_write+0x2b0/0x680 freeze_super+0x248/0x8a8 do_vfs_ioctl+0x149c/0x1b18 __arm64_sys_ioctl+0xd0/0x1a0 invoke_syscall+0x74/0x268 el0_svc_common.constprop.0+0x160/0x238 do_el0_svc+0x44/0x60 el0_svc+0x44/0xb0 el0t_64_sync_handler+0x118/0x128 el0t_64_sync+0x168/0x170 Fix this by having the io_uring side honor IOCB_NOWAIT, and only attempt a blocking grab of the super block rwsem if it isn't set. For normal issue where IOCB_NOWAIT would always be set, this returns -EAGAIN which will have io_uring core issue a blocking attempt of the write. That will in turn also get completions run, ensuring forward progress. Since freezing requires CAP_SYS_ADMIN in the first place, this isn't something that can be triggered by a regular user. Cc: stable@vger.kernel.org # 5.10+ Reported-by: Peter Mann <peter.mann@sh.cz> Link: https://lore.kernel.org/io-uring/38c94aec-81c9-4f62-b44e-1d87f5597644@sh.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-10-31 14:05:44 +00:00
static bool io_kiocb_start_write(struct io_kiocb *req, struct kiocb *kiocb)
{
struct inode *inode;
bool ret;
if (!(req->flags & REQ_F_ISREG))
return true;
if (!(kiocb->ki_flags & IOCB_NOWAIT)) {
kiocb_start_write(kiocb);
return true;
}
inode = file_inode(kiocb->ki_filp);
ret = sb_start_write_trylock(inode->i_sb);
if (ret)
__sb_writers_release(inode->i_sb, SB_FREEZE_WRITE);
return ret;
}
int io_write(struct io_kiocb *req, unsigned int issue_flags)
{
bool force_nonblock = issue_flags & IO_URING_F_NONBLOCK;
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
struct io_async_rw *io = req->async_data;
struct kiocb *kiocb = &rw->kiocb;
ssize_t ret, ret2;
loff_t *ppos;
fs: Initial atomic write support An atomic write is a write issued with torn-write protection, meaning that for a power failure or any other hardware failure, all or none of the data from the write will be stored, but never a mix of old and new data. Userspace may add flag RWF_ATOMIC to pwritev2() to indicate that the write is to be issued with torn-write prevention, according to special alignment and length rules. For any syscall interface utilizing struct iocb, add IOCB_ATOMIC for iocb->ki_flags field to indicate the same. A call to statx will give the relevant atomic write info for a file: - atomic_write_unit_min - atomic_write_unit_max - atomic_write_segments_max Both min and max values must be a power-of-2. Applications can avail of atomic write feature by ensuring that the total length of a write is a power-of-2 in size and also sized between atomic_write_unit_min and atomic_write_unit_max, inclusive. Applications must ensure that the write is at a naturally-aligned offset in the file wrt the total write length. The value in atomic_write_segments_max indicates the upper limit for IOV_ITER iovcnt. Add file mode flag FMODE_CAN_ATOMIC_WRITE, so files which do not have the flag set will have RWF_ATOMIC rejected and not just ignored. Add a type argument to kiocb_set_rw_flags() to allows reads which have RWF_ATOMIC set to be rejected. Helper function generic_atomic_write_valid() can be used by FSes to verify compliant writes. There we check for iov_iter type is for ubuf, which implies iovcnt==1 for pwritev2(), which is an initial restriction for atomic_write_segments_max. Initially the only user will be bdev file operations write handler. We will rely on the block BIO submission path to ensure write sizes are compliant for the bdev, so we don't need to check atomic writes sizes yet. Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com> jpg: merge into single patch and much rewrite Acked-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20240620125359.2684798-4-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-20 12:53:52 +00:00
ret = io_rw_init_file(req, FMODE_WRITE, WRITE);
if (unlikely(ret))
return ret;
req->cqe.res = iov_iter_count(&io->iter);
if (force_nonblock) {
/* If the file doesn't support async, just async punt */
if (unlikely(!io_file_supports_nowait(req, EPOLLOUT)))
goto ret_eagain;
/* Check if we can support NOWAIT. */
if (!(kiocb->ki_flags & IOCB_DIRECT) &&
!(req->file->f_op->fop_flags & FOP_BUFFER_WASYNC) &&
(req->flags & REQ_F_ISREG))
goto ret_eagain;
kiocb->ki_flags |= IOCB_NOWAIT;
} else {
/* Ensure we clear previously set non-block flag */
kiocb->ki_flags &= ~IOCB_NOWAIT;
}
ppos = io_kiocb_update_pos(req);
ret = rw_verify_area(WRITE, req->file, ppos, req->cqe.res);
if (unlikely(ret))
return ret;
io_uring/rw: fix missing NOWAIT check for O_DIRECT start write When io_uring starts a write, it'll call kiocb_start_write() to bump the super block rwsem, preventing any freezes from happening while that write is in-flight. The freeze side will grab that rwsem for writing, excluding any new writers from happening and waiting for existing writes to finish. But io_uring unconditionally uses kiocb_start_write(), which will block if someone is currently attempting to freeze the mount point. This causes a deadlock where freeze is waiting for previous writes to complete, but the previous writes cannot complete, as the task that is supposed to complete them is blocked waiting on starting a new write. This results in the following stuck trace showing that dependency with the write blocked starting a new write: task:fio state:D stack:0 pid:886 tgid:886 ppid:876 Call trace: __switch_to+0x1d8/0x348 __schedule+0x8e8/0x2248 schedule+0x110/0x3f0 percpu_rwsem_wait+0x1e8/0x3f8 __percpu_down_read+0xe8/0x500 io_write+0xbb8/0xff8 io_issue_sqe+0x10c/0x1020 io_submit_sqes+0x614/0x2110 __arm64_sys_io_uring_enter+0x524/0x1038 invoke_syscall+0x74/0x268 el0_svc_common.constprop.0+0x160/0x238 do_el0_svc+0x44/0x60 el0_svc+0x44/0xb0 el0t_64_sync_handler+0x118/0x128 el0t_64_sync+0x168/0x170 INFO: task fsfreeze:7364 blocked for more than 15 seconds. Not tainted 6.12.0-rc5-00063-g76aaf945701c #7963 with the attempting freezer stuck trying to grab the rwsem: task:fsfreeze state:D stack:0 pid:7364 tgid:7364 ppid:995 Call trace: __switch_to+0x1d8/0x348 __schedule+0x8e8/0x2248 schedule+0x110/0x3f0 percpu_down_write+0x2b0/0x680 freeze_super+0x248/0x8a8 do_vfs_ioctl+0x149c/0x1b18 __arm64_sys_ioctl+0xd0/0x1a0 invoke_syscall+0x74/0x268 el0_svc_common.constprop.0+0x160/0x238 do_el0_svc+0x44/0x60 el0_svc+0x44/0xb0 el0t_64_sync_handler+0x118/0x128 el0t_64_sync+0x168/0x170 Fix this by having the io_uring side honor IOCB_NOWAIT, and only attempt a blocking grab of the super block rwsem if it isn't set. For normal issue where IOCB_NOWAIT would always be set, this returns -EAGAIN which will have io_uring core issue a blocking attempt of the write. That will in turn also get completions run, ensuring forward progress. Since freezing requires CAP_SYS_ADMIN in the first place, this isn't something that can be triggered by a regular user. Cc: stable@vger.kernel.org # 5.10+ Reported-by: Peter Mann <peter.mann@sh.cz> Link: https://lore.kernel.org/io-uring/38c94aec-81c9-4f62-b44e-1d87f5597644@sh.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-10-31 14:05:44 +00:00
if (unlikely(!io_kiocb_start_write(req, kiocb)))
return -EAGAIN;
kiocb->ki_flags |= IOCB_WRITE;
if (likely(req->file->f_op->write_iter))
ret2 = req->file->f_op->write_iter(kiocb, &io->iter);
else if (req->file->f_op->write)
ret2 = loop_rw_iter(WRITE, rw, &io->iter);
else
ret2 = -EINVAL;
if (req->flags & REQ_F_REISSUE) {
req->flags &= ~REQ_F_REISSUE;
ret2 = -EAGAIN;
}
/*
* Raw bdev writes will return -EOPNOTSUPP for IOCB_NOWAIT. Just
* retry them without IOCB_NOWAIT.
*/
if (ret2 == -EOPNOTSUPP && (kiocb->ki_flags & IOCB_NOWAIT))
ret2 = -EAGAIN;
/* no retry on NONBLOCK nor RWF_NOWAIT */
if (ret2 == -EAGAIN && (req->flags & REQ_F_NOWAIT))
goto done;
if (!force_nonblock || ret2 != -EAGAIN) {
/* IOPOLL retry should happen for io-wq threads */
if (ret2 == -EAGAIN && (req->ctx->flags & IORING_SETUP_IOPOLL))
goto ret_eagain;
if (ret2 != req->cqe.res && ret2 >= 0 && need_complete_io(req)) {
trace_io_uring_short_write(req->ctx, kiocb->ki_pos - ret2,
req->cqe.res, ret2);
/* This is a partial write. The file pos has already been
* updated, setup the async struct to complete the request
* in the worker. Also update bytes_done to account for
* the bytes already written.
*/
iov_iter_save_state(&io->iter, &io->iter_state);
io->bytes_done += ret2;
if (kiocb->ki_flags & IOCB_WRITE)
io_req_end_write(req);
return -EAGAIN;
}
done:
return kiocb_done(req, ret2, issue_flags);
} else {
ret_eagain:
iov_iter_restore(&io->iter, &io->iter_state);
io_meta_restore(io, kiocb);
if (kiocb->ki_flags & IOCB_WRITE)
io_req_end_write(req);
return -EAGAIN;
}
}
void io_rw_fail(struct io_kiocb *req)
{
int res;
res = io_fixup_rw_res(req, req->cqe.res);
io_req_set_res(req, res, req->cqe.flags);
}
static int io_uring_classic_poll(struct io_kiocb *req, struct io_comp_batch *iob,
unsigned int poll_flags)
{
struct file *file = req->file;
if (req->opcode == IORING_OP_URING_CMD) {
struct io_uring_cmd *ioucmd;
ioucmd = io_kiocb_to_cmd(req, struct io_uring_cmd);
return file->f_op->uring_cmd_iopoll(ioucmd, iob, poll_flags);
} else {
struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
return file->f_op->iopoll(&rw->kiocb, iob, poll_flags);
}
}
static u64 io_hybrid_iopoll_delay(struct io_ring_ctx *ctx, struct io_kiocb *req)
{
struct hrtimer_sleeper timer;
enum hrtimer_mode mode;
ktime_t kt;
u64 sleep_time;
if (req->flags & REQ_F_IOPOLL_STATE)
return 0;
if (ctx->hybrid_poll_time == LLONG_MAX)
return 0;
/* Using half the running time to do schedule */
sleep_time = ctx->hybrid_poll_time / 2;
kt = ktime_set(0, sleep_time);
req->flags |= REQ_F_IOPOLL_STATE;
mode = HRTIMER_MODE_REL;
A rather large update for timekeeping and timers: - The final step to get rid of auto-rearming posix-timers posix-timers are currently auto-rearmed by the kernel when the signal of the timer is ignored so that the timer signal can be delivered once the corresponding signal is unignored. This requires to throttle the timer to prevent a DoS by small intervals and keeps the system pointlessly out of low power states for no value. This is a long standing non-trivial problem due to the lock order of posix-timer lock and the sighand lock along with life time issues as the timer and the sigqueue have different life time rules. Cure this by: * Embedding the sigqueue into the timer struct to have the same life time rules. Aside of that this also avoids the lookup of the timer in the signal delivery and rearm path as it's just a always valid container_of() now. * Queuing ignored timer signals onto a seperate ignored list. * Moving queued timer signals onto the ignored list when the signal is switched to SIG_IGN before it could be delivered. * Walking the ignored list when SIG_IGN is lifted and requeue the signals to the actual signal lists. This allows the signal delivery code to rearm the timer. This also required to consolidate the signal delivery rules so they are consistent across all situations. With that all self test scenarios finally succeed. - Core infrastructure for VFS multigrain timestamping This is required to allow the kernel to use coarse grained time stamps by default and switch to fine grained time stamps when inode attributes are actively observed via getattr(). These changes have been provided to the VFS tree as well, so that the VFS specific infrastructure could be built on top. - Cleanup and consolidation of the sleep() infrastructure * Move all sleep and timeout functions into one file * Rework udelay() and ndelay() into proper documented inline functions and replace the hardcoded magic numbers by proper defines. * Rework the fsleep() implementation to take the reality of the timer wheel granularity on different HZ values into account. Right now the boundaries are hard coded time ranges which fail to provide the requested accuracy on different HZ settings. * Update documentation for all sleep/timeout related functions and fix up stale documentation links all over the place * Fixup a few usage sites - Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks A system can have multiple PTP clocks which are participating in seperate and independent PTP clock domains. So far the kernel only considers the PTP clock which is based on CLOCK TAI relevant as that's the clock which drives the timekeeping adjustments via the various user space daemons through adjtimex(2). The non TAI based clock domains are accessible via the file descriptor based posix clocks, but their usability is very limited. They can't be accessed fast as they always go all the way out to the hardware and they cannot be utilized in the kernel itself. As Time Sensitive Networking (TSN) gains traction it is required to provide fast user and kernel space access to these clocks. The approach taken is to utilize the timekeeping and adjtimex(2) infrastructure to provide this access in a similar way how the kernel provides access to clock MONOTONIC, REALTIME etc. Instead of creating a duplicated infrastructure this rework converts timekeeping and adjtimex(2) into generic functionality which operates on pointers to data structures instead of using static variables. This allows to provide time accessors and adjtimex(2) functionality for the independent PTP clocks in a subsequent step. - Consolidate hrtimer initialization hrtimers are set up by initializing the data structure and then seperately setting the callback function for historical reasons. That's an extra unnecessary step and makes Rust support less straight forward than it should be. Provide a new set of hrtimer_setup*() functions and convert the core code and a few usage sites of the less frequently used interfaces over. The bulk of the htimer_init() to hrtimer_setup() conversion is already prepared and scheduled for the next merge window. - Drivers: * Ensure that the global timekeeping clocksource is utilizing the cluster 0 timer on MIPS multi-cluster systems. Otherwise CPUs on different clusters use their cluster specific clocksource which is not guaranteed to be synchronized with other clusters. * Mostly boring cleanups, fixes, improvements and code movement -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7kPITHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoZKkD/9OUL6fOJrDUmOYBa4QVeMyfTef4EaL tvwIMM/29XQFeiq3xxCIn+EMnHjXn2lvIhYGQ7GKsbKYwvJ7ZBDpQb+UMhZ2nKI9 6D6BP6WomZohKeH2fZbJQAdqOi3KRYdvQdIsVZUexkqiaVPphRvOH9wOr45gHtZM EyMRSotPlQTDqcrbUejDMEO94GyjDCYXRsyATLxjmTzL/N4xD4NRIiotjM2vL/a9 8MuCgIhrKUEyYlFoOxxeokBsF3kk3/ez2jlG9b/N8VLH3SYIc2zgL58FBgWxlmgG bY71nVG3nUgEjxBd2dcXAVVqvb+5widk8p6O7xxOAQKTLMcJ4H0tQDkMnzBtUzvB DGAJDHAmAr0g+ja9O35Pkhunkh4HYFIbq0Il4d1HMKObhJV0JumcKuQVxrXycdm3 UZfq3seqHsZJQbPgCAhlFU0/2WWScocbee9bNebGT33KVwSp5FoVv89C/6Vjb+vV Gusc3thqrQuMAZW5zV8g4UcBAA/xH4PB0I+vHib+9XPZ4UQ7/6xKl2jE0kd5hX7n AAUeZvFNFqIsY+B6vz+Jx/yzyM7u5cuXq87pof5EHVFzv56lyTp4ToGcOGYRgKH5 JXeYV1OxGziSDrd5vbf9CzdWMzqMvTefXrHbWrjkjhNOe8E1A8O88RZ5uRKZhmSw hZZ4hdM9+3T7cg== =2VC6 -----END PGP SIGNATURE----- Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "A rather large update for timekeeping and timers: - The final step to get rid of auto-rearming posix-timers posix-timers are currently auto-rearmed by the kernel when the signal of the timer is ignored so that the timer signal can be delivered once the corresponding signal is unignored. This requires to throttle the timer to prevent a DoS by small intervals and keeps the system pointlessly out of low power states for no value. This is a long standing non-trivial problem due to the lock order of posix-timer lock and the sighand lock along with life time issues as the timer and the sigqueue have different life time rules. Cure this by: - Embedding the sigqueue into the timer struct to have the same life time rules. Aside of that this also avoids the lookup of the timer in the signal delivery and rearm path as it's just a always valid container_of() now. - Queuing ignored timer signals onto a seperate ignored list. - Moving queued timer signals onto the ignored list when the signal is switched to SIG_IGN before it could be delivered. - Walking the ignored list when SIG_IGN is lifted and requeue the signals to the actual signal lists. This allows the signal delivery code to rearm the timer. This also required to consolidate the signal delivery rules so they are consistent across all situations. With that all self test scenarios finally succeed. - Core infrastructure for VFS multigrain timestamping This is required to allow the kernel to use coarse grained time stamps by default and switch to fine grained time stamps when inode attributes are actively observed via getattr(). These changes have been provided to the VFS tree as well, so that the VFS specific infrastructure could be built on top. - Cleanup and consolidation of the sleep() infrastructure - Move all sleep and timeout functions into one file - Rework udelay() and ndelay() into proper documented inline functions and replace the hardcoded magic numbers by proper defines. - Rework the fsleep() implementation to take the reality of the timer wheel granularity on different HZ values into account. Right now the boundaries are hard coded time ranges which fail to provide the requested accuracy on different HZ settings. - Update documentation for all sleep/timeout related functions and fix up stale documentation links all over the place - Fixup a few usage sites - Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks A system can have multiple PTP clocks which are participating in seperate and independent PTP clock domains. So far the kernel only considers the PTP clock which is based on CLOCK TAI relevant as that's the clock which drives the timekeeping adjustments via the various user space daemons through adjtimex(2). The non TAI based clock domains are accessible via the file descriptor based posix clocks, but their usability is very limited. They can't be accessed fast as they always go all the way out to the hardware and they cannot be utilized in the kernel itself. As Time Sensitive Networking (TSN) gains traction it is required to provide fast user and kernel space access to these clocks. The approach taken is to utilize the timekeeping and adjtimex(2) infrastructure to provide this access in a similar way how the kernel provides access to clock MONOTONIC, REALTIME etc. Instead of creating a duplicated infrastructure this rework converts timekeeping and adjtimex(2) into generic functionality which operates on pointers to data structures instead of using static variables. This allows to provide time accessors and adjtimex(2) functionality for the independent PTP clocks in a subsequent step. - Consolidate hrtimer initialization hrtimers are set up by initializing the data structure and then seperately setting the callback function for historical reasons. That's an extra unnecessary step and makes Rust support less straight forward than it should be. Provide a new set of hrtimer_setup*() functions and convert the core code and a few usage sites of the less frequently used interfaces over. The bulk of the htimer_init() to hrtimer_setup() conversion is already prepared and scheduled for the next merge window. - Drivers: - Ensure that the global timekeeping clocksource is utilizing the cluster 0 timer on MIPS multi-cluster systems. Otherwise CPUs on different clusters use their cluster specific clocksource which is not guaranteed to be synchronized with other clusters. - Mostly boring cleanups, fixes, improvements and code movement" * tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits) posix-timers: Fix spurious warning on double enqueue versus do_exit() clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties clocksource/drivers/gpx: Remove redundant casts clocksource/drivers/timer-ti-dm: Fix child node refcount handling dt-bindings: timer: actions,owl-timer: convert to YAML clocksource/drivers/ralink: Add Ralink System Tick Counter driver clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource clocksource/drivers/timer-ti-dm: Don't fail probe if int not found clocksource/drivers:sp804: Make user selectable clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions hrtimers: Delete hrtimer_init_on_stack() alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack() io_uring: Switch to use hrtimer_setup_on_stack() sched/idle: Switch to use hrtimer_setup_on_stack() hrtimers: Delete hrtimer_init_sleeper_on_stack() wait: Switch to use hrtimer_setup_sleeper_on_stack() timers: Switch to use hrtimer_setup_sleeper_on_stack() net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack() futex: Switch to use hrtimer_setup_sleeper_on_stack() fs/aio: Switch to use hrtimer_setup_sleeper_on_stack() ...
2024-11-20 00:35:06 +00:00
hrtimer_setup_sleeper_on_stack(&timer, CLOCK_MONOTONIC, mode);
hrtimer_set_expires(&timer.timer, kt);
set_current_state(TASK_INTERRUPTIBLE);
hrtimer_sleeper_start_expires(&timer, mode);
if (timer.task)
io_schedule();
hrtimer_cancel(&timer.timer);
__set_current_state(TASK_RUNNING);
destroy_hrtimer_on_stack(&timer.timer);
return sleep_time;
}
static int io_uring_hybrid_poll(struct io_kiocb *req,
struct io_comp_batch *iob, unsigned int poll_flags)
{
struct io_ring_ctx *ctx = req->ctx;
u64 runtime, sleep_time;
int ret;
sleep_time = io_hybrid_iopoll_delay(ctx, req);
ret = io_uring_classic_poll(req, iob, poll_flags);
runtime = ktime_get_ns() - req->iopoll_start - sleep_time;
/*
* Use minimum sleep time if we're polling devices with different
* latencies. We could get more completions from the faster ones.
*/
if (ctx->hybrid_poll_time > runtime)
ctx->hybrid_poll_time = runtime;
return ret;
}
int io_do_iopoll(struct io_ring_ctx *ctx, bool force_nonspin)
{
struct io_wq_work_node *pos, *start, *prev;
unsigned int poll_flags = 0;
DEFINE_IO_COMP_BATCH(iob);
int nr_events = 0;
/*
* Only spin for completions if we don't have multiple devices hanging
* off our complete list.
*/
if (ctx->poll_multi_queue || force_nonspin)
poll_flags |= BLK_POLL_ONESHOT;
wq_list_for_each(pos, start, &ctx->iopoll_list) {
struct io_kiocb *req = container_of(pos, struct io_kiocb, comp_list);
int ret;
/*
* Move completed and retryable entries to our local lists.
* If we find a request that requires polling, break out
* and complete those lists first, if we have entries there.
*/
if (READ_ONCE(req->iopoll_completed))
break;
if (ctx->flags & IORING_SETUP_HYBRID_IOPOLL)
ret = io_uring_hybrid_poll(req, &iob, poll_flags);
else
ret = io_uring_classic_poll(req, &iob, poll_flags);
if (unlikely(ret < 0))
return ret;
else if (ret)
poll_flags |= BLK_POLL_ONESHOT;
/* iopoll may have completed current req */
if (!rq_list_empty(&iob.req_list) ||
READ_ONCE(req->iopoll_completed))
break;
}
if (!rq_list_empty(&iob.req_list))
iob.complete(&iob);
else if (!pos)
return 0;
prev = start;
wq_list_for_each_resume(pos, prev) {
struct io_kiocb *req = container_of(pos, struct io_kiocb, comp_list);
/* order with io_complete_rw_iopoll(), e.g. ->result updates */
if (!smp_load_acquire(&req->iopoll_completed))
break;
nr_events++;
req->cqe.flags = io_put_kbuf(req, req->cqe.res, 0);
if (req->opcode != IORING_OP_URING_CMD)
io_req_rw_cleanup(req, 0);
}
if (unlikely(!nr_events))
return 0;
pos = start ? start->next : ctx->iopoll_list.first;
wq_list_cut(&ctx->iopoll_list, prev, start);
if (WARN_ON_ONCE(!wq_list_empty(&ctx->submit_state.compl_reqs)))
return 0;
ctx->submit_state.compl_reqs.first = pos;
__io_submit_flush_completions(ctx);
return nr_events;
}
void io_rw_cache_free(const void *entry)
{
struct io_async_rw *rw = (struct io_async_rw *) entry;
if (rw->free_iovec) {
kasan_mempool_unpoison_object(rw->free_iovec,
rw->free_iov_nr * sizeof(struct iovec));
io_rw_iovec_free(rw);
}
kfree(rw);
}