Kernel/linux-next
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git synced 2025-01-10 07:50:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
linux-next/drivers/staging/Makefile

53 lines
1.7 KiB
Makefile
Raw Normal View History

Staging: add Kconfig entries and Makefile infrastructure This hooks up the drivers/staging directory to the build system Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-24 14:46:44 -07:00
# Makefile for staging directory
Staging: workaround build system bug This is needed as CONFIG_STAGING is set to y, yet there is no code in drivers/staging/ to build, so the build-in.o doesn't get created properly. Create a "dummy" module in drivers/staging called staging.c to work around this bug. Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-13 14:32:52 -07:00
# fix for build system bug...
obj-$(CONFIG_STAGING) += staging.o
Staging: add et131x network driver This is a driver for the ET1310 network device. Based on the driver found at https://sourceforge.net/projects/et131x/ Cleaned up immensely by Olaf Hartman <o.hartmann@telovital.com> and Christoph Hellwig <hch@infradead.org> Note, the powermanagement options were removed from the vendor provided driver as they did not build properly at the time. TODO: - kernel coding style cleanups - forward port for latest network driver changes - kill useless typecasts (e.g. in et1310_phy.c) - alloc_etherdev is initializing memory with zero?!? - add_timer call in et131x_netdev.c is correct? - Add power saving functionality (suspend, sleep, resume) - Implement a few more kernel Parameter (set mac ) Cc: Olaf Hartmann <o.hartmann@telovital.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dean Adams <dadams1969@gmail.com> Cc: Victor Soriano <vjsoriano@agere.com> Cc: Andre-Sebastian Liebe <andre@lianse.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-03 17:30:53 -07:00
obj-$(CONFIG_ET131X) += et131x/
Staging: add Alacritech slicoss network driver This adds the Alacritech slicoss driver to the tree. This driver is supposed to support: Mojave cards (single port PCI Gigabit) both copper and fiber Oasis cards (single and dual port PCI-x Gigabit) copper and fiber Kalahari cards (dual and quad port PCI-e Gigabit) copper and fiber The driver was acutally tested on Oasis and Kalahari cards. TODO: - move firmware loading to request_firmware() - remove direct memory access of structures - any remaining sparse and checkpatch.pl warnings - any netdev recommended changes Many thanks to Lior Dotan <liodot@gmail.com> for help with the cleanup of this driver. Cc: Lior Dotan <liodot@gmail.com> Cc: Christopher Harrer <charrer@alacritech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-19 14:27:25 -07:00
obj-$(CONFIG_SLICOSS) += slicoss/
Staging: add sxg network driver This is the first rough cut at a driver for the Alacritech SLIC Technology Non-Accelerated 10Gbe network driver TODO: - lindent the code - remove typedefs - remove wrappers - checkpatch.pl cleanups - new functionality that the card needs Cc: Christopher Harrer <charrer@alacritech.com> Cc: Michael Miles <mmiles@alacritech.com> Cc: Christopher Harrer <charrer@alacritech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21 14:04:55 -07:00
obj-$(CONFIG_SXG) += sxg/
Staging: add me4000 pci data collection driver Originally written by Guenter Gebhardt <g.gebhardt@meilhaus.de> TODO: - checkpatch.pl cleanups - sparse cleanups - possible /proc interaction cleanups - more info needed for Kconfig entry - real device id? - module parameter cleanup Cc: Wolfgang Beiter <w.beiter@aon.at> Cc: Guenter Gebhardt <g.gebhardt@meilhaus.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-21 14:12:51 -07:00
obj-$(CONFIG_ME4000) += me4000/
Staging: Add the Meilhaus ME-IDS driver package Originally written by Guenter Gebhardt <g.gebhardt@meilhaus.de> and Krzysztof Gantzke <k.gantzke@meilhaus.de> This is the drv/lnx/mod directory of ME-IDS 1.2.9 tarball with some files from drv/lnx/include. Signed-off-by: David Kiliani <mail@davidkiliani.de> Cc: Guenter Gebhardt <g.gebhardt@meilhaus.de> Cc: Krzysztof Gantzke <k.gantzke@meilhaus.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-01 00:39:12 +01:00
obj-$(CONFIG_MEILHAUS) += meilhaus/
Staging: add the go7007 video driver Todo: - checkpatch.pl cleanups - sparse cleanups - lots of little modules, should be merged together and added to the build. - testing? - handle churn in v4l layer. Many thanks to Ross Cohen <rcohen@snurgle.org> for cleanup patches on this driver. Cc: Ross Cohen <rcohen@snurgle.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-15 16:53:09 -08:00
obj-$(CONFIG_VIDEO_GO7007) += go7007/
Staging: USB/IP: add common functions needed This adds the common functions needed by both the host and client side of the USB/IP code. Brian Merrell cleaned up a lot of this code and submitted it for inclusion. Greg also did a lot of cleanup. Signed-off-by: Brian G. Merrell <bgmerrell@novell.com> Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-09 14:56:51 -06:00
obj-$(CONFIG_USB_IP_COMMON) += usbip/
Staging: add w35und wifi driver This is driver for w35und usb wifi -- also in kohjinsha subnotebook. It should work well enough to associate and ping, but it obviously needs to be rewritten two more times... OTOH worst horrors (like embedded wifi stack) should have been fixed already... Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-01 14:36:56 +02:00
obj-$(CONFIG_W35UND) += winbond/
Staging: add wlan-ng prism2 usb driver This adds the wlan-ng prism2 USB driver to the drivers/staging tree. The code was originally written by the linux-wlan-ng team, patched by some Novell engineers to properly work on newer kernels, and then hacked into place in order to get it to build properly in a single subdirectory within the kernel tree by me. It supports a wide range of older USB prism2 devices, and contains a 80211 stack to support this single driver. Cc: Christian Zoz <zoz@suse.de> Cc: Andreas Gruenbacher <agruen@suse.de> Cc: linux-wireless <linux-wireless@vger.kernel.org> Cc: John Linville <linville@tuxdriver.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: linux-wlan-ng <solomon@linux-wlan.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-02 11:29:28 -07:00
obj-$(CONFIG_PRISM2_USB) += wlan-ng/
Staging: add echo cancelation module This is used by mISDN and Zaptel drivers. From: Steve Underwood <steveu@coppice.org> From: David Rowe <david@rowetel.com> Cc: Tzafrir Cohen <tzafrir.cohen@xorcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-06 21:41:46 -07:00
obj-$(CONFIG_ECHO) += echo/
staging: at76_usb wireless driver Add the at76_usb wireless driver to the staging tree while the other kernel driver (out of tree) gets rewritten to use the internal wireless stack. This patch comes directly from the Fedora kernel tree, with only the directory placement of the files changed. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-13 14:33:13 -07:00
obj-$(CONFIG_USB_ATMEL) += at76_usb/
Staging: add poch driver This is the first cut at a driver for the Redrapids Pocket Change CardBus devices. Receiving data seems to work properly, but overflows happen on transmit. Still needs more hardware debugging to work properly. (cleaned up to use proper driver core api functions by Greg) From: Vijay Kumar <vijaykumar@bravegnu.org> Cc: Alexey Zaytsev <alexey.zaytsev@gmail.com> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Ken Sienski <sienski@redrapids.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-19 08:58:46 +05:30
obj-$(CONFIG_POCH) += poch/
Staging: add agnx wireless driver This driver is for the Airgo AGNX00 wireless chip. From: Li YanBo <dreamfly281@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-27 20:32:57 -07:00
obj-$(CONFIG_AGNX) += agnx/
Staging: add otus Atheros wireless network driver Initial dump of the otus USB wireless network driver. It builds properly, but a lot of work needs to be done cleaning it up before it can be merged into the wireless driver tree. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-27 22:44:22 -07:00
obj-$(CONFIG_OTUS) += otus/
Staging: add rt2860 wireless driver This is the Ralink RT2860 driver from the company that does horrible things like reading a config file from /etc. However, the driver that is currently under development from the wireless development community is not working at all yet, so distros and users are using this version instead (quite common hardware on a lot of netbook machines). So here is this driver, for now, until the wireless developers get a "clean" version into the main tree, or until this version is cleaned up sufficiently to move out of the staging tree. Ported to the Linux build system and cleaned up a bit already by me. Cc: Linux wireless <linux-wireless@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-28 14:48:09 -07:00
obj-$(CONFIG_RT2860) += rt2860/
Staging: add rt2870 wireless driver This is the Ralink RT2870 driver from the company that does horrible things like reading a config file from /etc. However, the driver that is currently under development from the wireless development community is not working at all yet, so distros and users are using this version instead (quite common hardware on a lot of netbook machines). So here is this driver, for now, until the wireless developers get a "clean" version into the main tree, or until this version is cleaned up sufficiently to move out of the staging tree. Ported to the Linux build system and cleaned up a bit already by me. Cc: Linux wireless <linux-wireless@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17 17:04:23 -08:00
obj-$(CONFIG_RT2870) += rt2870/
Staging: add rt3090 wireless driver This is the vendor driver for the Ralink RT3090 chipset. It should be later cleaned and ported to use the existing rt2x00 infrastructure or just replaced by the proper version. [ Unfortunately since it follows the same design/implementation like rt{286,287,307}0 drivers (already present in the staging tree) it is highly unlikely that it will see much love from the wireless development community.. ] However since the development of the cleaner/proper version can take significant time lets give distros (i.e. openSUSE seems to already have the package with the original vendor driver) and users "something" to use in the meantime. I forward ported it to 2.6.31-rc1, ported to the Linux build system and did some initial cleanups. More fixes/cleanups to come later (it seems that the driver can be made to share most of its code with the other Ralink drivers already present in the staging tree). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-25 15:40:31 +02:00
obj-$(CONFIG_RT3090) += rt3090/
Staging: add comedi core This adds the Comedi core to the staging tree. This is a data acquision infrastructure for Linux, providing a common interface for these types of drivers. Taken directly from the comedi git tree, with only minor tweaks by Greg to get it to build properly within the kernel tree. From: David Schleef <ds@schleef.org> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Shawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-04 20:29:31 -08:00
obj-$(CONFIG_COMEDI) += comedi/
Staging: add asus_oled driver Driver for the OLED tiny display on some Asus laptops. From: Jakub Schmidtke <sjakub@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-04 23:46:58 -08:00
obj-$(CONFIG_ASUS_OLED) += asus_oled/
Staging: add lcd-panel driver This adds the lcd-panel parallel port driver to the staging tree. See the file, drivers/staging/panel/TODO for what needs to be fixed up in order for this to be properly merged into the rest of the kernel tree. Cc: Willy Tarreau <w@1wt.eu> Cc: Frank Menne <frank.menne@hsm.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13 17:18:59 -08:00
obj-$(CONFIG_PANEL) += panel/
Staging: add Driver for Altera PCI Express Chaining DMA reference design Altera PCI Express Chaining DMA driver A reference driver that exercises the Chaining DMA logic reference design generated along the Altera FPGA PCI Express soft or hard core, only if instantiated using the MegaWizard, not the SOPC builder, of Quartus 8.1. This driver can be used to test the logic instantiation and PCI Express layers and acts as a starting point for driving custom logic connected to the PCI Express End Point Chaining DMA engines. Signed-off-by: Leon Woestenberg <leon@sidebranch.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-01 08:45:57 -05:00
obj-$(CONFIG_ALTERA_PCIE_CHDMA) += altpciechdma/
Staging: add rtl8187se driver This is a driver for the Realtek 8187 "SE" wireless PCI devices in some netbook computers (MSI Wind, and others). It includes its own copy of the ieee80211 stack, but it is compiled into the driver to prevend duplicate symbol issues. This version comes from Ralink with no authorship, but it is based on an old version of the rtl8180 driver from Andrea Merello. It was hacked up a bit to get it to build properly within the kernel tree and to properly handle the merged wireless stack within the driver. Cc: Andrea Merello <andreamrl@tiscali.it> Cc: linux-wireless <linux-wireless@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-04 20:01:41 -08:00
obj-$(CONFIG_RTL8187SE) += rtl8187se/
Staging: add rtl8192SU wireless usb driver Driver from Realtek for the Realtek RTL8192 USB wifi device Based on the r8187 driver from Andrea Merello <andreamrl@tiscali.it> and others. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-21 22:16:02 -07:00
obj-$(CONFIG_RTL8192SU) += rtl8192su/
Staging: add princeton instruments usb camera driver Adds the driver for the Princeton Instruments USB camera. Needs a lot of work... TODO: - make checkpatch.pl clean - coding style fixups (typedefs, etc.) - get it to build properly - audit ioctls - remove ioctls if possible - assign proper minor number - remove dbg() macro - lots of general cleanups - review locking Cc: Judd Montgomery <judd@jpilot.org> Cc: Jeff Frontz <jeff.frontz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21 14:04:55 -07:00
obj-$(CONFIG_USB_RSPI) += rspiusb/
Staging: add mimio xi driver This patch adds the Mimio Xi interactive whiteboard driver to the tree. It was originally written by mwilder@cs.nmsu.edu, but cleaned up and forward ported by me to the latest kernel version. Cc: Phil Hannent <phil@hannent.co.uk> Cc: <mwilder@cs.nmsu.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-24 15:19:47 +01:00
obj-$(CONFIG_INPUT_MIMIO) += mimio/
Staging: add frontier tranzport and alphatrack drivers Adds the tranzport and alphatrack drivers to the staging tree. Cc: David Taht <d@teklibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17 17:13:45 -08:00
obj-$(CONFIG_TRANZPORT) += frontier/
Staging: add android framework This prepares us to start adding the android drivers to the build. The dummy android.c file will go away in the next few patches, as it will not be needed once drivers/staging/android/ has a driver in it. Cc: Robert Love <rlove@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-19 17:21:40 -08:00
obj-$(CONFIG_ANDROID) += android/
Staging: Dream: separate Kconfig/Makefile into subdirectory Separate Kconfig/Makefile glue from dream into subdirectory. I plan to add few more drivers, and changing staging/Makefile each time sounds like inviting conflicts. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-08 14:27:02 +02:00
obj-$(CONFIG_ANDROID) += dream/
Staging: dst: kconfig and makefile changes. Signed-off-by: Evgeniy Polaykov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-14 02:05:33 +03:00
obj-$(CONFIG_DST) += dst/
Staging: pohmelfs: kconfig/makefile and vfs changes. This patch adds Kconfig and Makefile entries and exports to VFS functions to be used by POHMELFS. Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09 17:02:42 +03:00
obj-$(CONFIG_POHMELFS) += pohmelfs/
Staging: Add stlc45xx, wi-fi driver for stlc4550/4560 This patch adds a new driver called stlc45xx, which supports wi-fi chipsets stlc4550 and stlc4560 from ST-NXP Wireless. The chipset can be found, for example, from Nokia N800 and N810 products. The driver is implemented based on the firmware interface information published by ST-NXP Wireless here: http://wireless.kernel.org/en/developers/Documentation/specs#STMicroelectronicshardware Currently only SPI interface is supported. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 22:01:20 +02:00
obj-$(CONFIG_STLC45XX) += stlc45xx/
Staging: b3dfg: Prepare b3dfg for submission upstream. - Basically, update driver to run with 2.6.28 - Conversion from struct class_device to struct device. - Conversion from .nopfn to .fault in vm_operations_struct. - Update use of pci_resource_flags to check for IORESOURCE_SIZEALIGN. - Update use of pci_dma_mapping_error. - Minor code cleanup and integration with kernel build system. Signed-off-by: Justin Bronder <jsbronder@brontes3d.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-28 10:06:42 -05:00
obj-$(CONFIG_B3DFG) += b3dfg/
Staging: phison: add driver to the build system Cc: Evan Ko <evan_ko@phison.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09 13:02:35 -08:00
obj-$(CONFIG_IDE_PHISON) += phison/
Staging: p9auth: add to the kernel build This adds the p9auth code to the kernel build Cc: Ashwin Ganti <ashwin.ganti@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-24 20:08:20 -08:00
obj-$(CONFIG_PLAN9AUTH) += p9auth/
Staging: add heci driver The Intel Management Engine Interface (aka HECI: Host Embedded Controller Interface ) enables communication between the host OS and the Management Engine firmware. MEI is bi-directional, and either the host or Intel AMT firmware can initiate transactions. The core hardware architecture of Intel Active Management Technology (Intel AMT) is resident in firmware. The micro-controller within the chipset's graphics and memory controller (GMCH) hub houses the Management Engine (ME) firmware, which implements various services on behalf of management applications. Some of the ME subsystems that can be access via MEI driver: - Intel(R) Quiet System Technology (QST) is implemented as a firmware subsystem that runs in the ME. Programs that wish to expose the health monitoring and fan speed control capabilities of Intel(R) QST will need to use the MEI driver to communicate with the ME sub-system. - ASF is the "Alert Standard Format" which is an DMTF manageability standard. It is implemented in the PC's hardware and firmware, and is managed from a remote console. Most recent Intel desktop chipsets have one or more of the above ME services. The MEI driver will make it possible to support the above features on Linux and provides applications access to the ME and it's features. Signed-off-by: Anas Nashif <anas.nashif@intel.com> Signed-off-by: Marcin Obara <marcin.obara@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-25 12:29:24 -08:00
obj-$(CONFIG_HECI) += heci/
Staging: line6: add to the build This adds the line6 driver to the build system. Cc: Markus Grabner <grabner@icg.tugraz.at> Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-27 19:50:03 -08:00
obj-$(CONFIG_LINE6_USB) += line6/
Staging: serqt_usb2 add the driver to the build Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-31 15:49:42 -04:00
obj-$(CONFIG_USB_SERIAL_QUATECH2) += serqt_usb2/
Staging: add Support for Quatech ESU2-100 USB 2.0 8-port serial adaptor The patch is of the "works as far as it goes" variety, in that the module compiles and loads, the device nodes are registered and the unit switched on, but nothing actually works. On the other hand, it doesn't panic the kernel, as far as I know. Signed-off-by: Richard Ash <richard@audacityteam.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-23 17:28:06 +01:00
obj-$(CONFIG_USB_SERIAL_QUATECH_USB2) += quatech_usb2/
Staging: Add octeon-ethernet driver files. The octeon-ethernet driver supports the sgmii, rgmii, spi, and xaui ports present on the Cavium OCTEON family of SOCs. These SOCs are multi-core mips64 processors with existing support over in arch/mips. The driver files can be categorized into three basic groups: 1) Register definitions, these are named cvmx-*-defs.h 2) Main driver code, these have names that don't start cvmx-. 3) Interface specific functions and other utility code, names starting with cvmx- Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-05 17:35:21 -07:00
obj-$(CONFIG_OCTEON_ETHERNET) += octeon/
Staging: vt6655: Integrate drivers/staging/vt6655 into build system. Integrate drivers/staging/vt6655 into build system. Signed-off-by: Forest Bond <forest@alittletooquiet.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-02 14:44:46 -04:00
obj-$(CONFIG_VT6655) += vt6655/
Staging: vt6656: Integrate vt6656 into build system. Integrate drivers/staging/vt6656 into build system. Signed-off-by: Forest Bond <forest@alittletooquiet.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-13 07:39:00 -04:00
obj-$(CONFIG_VT6656) += vt6656/
Staging: cpc-usb: add driver to the build This adds the cpc-usb driver to the kernel build Cc: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-14 20:47:10 -07:00
obj-$(CONFIG_USB_CPC) += cpc-usb/
Staging: udlfb: add udlfb driver to build This adds the udlfb driver to the build system Cc: Roberto De Ioris <roberto@unbit.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-03 14:45:40 -07:00
obj-$(CONFIG_FB_UDL) += udlfb/
Staging: hv: add the Hyper-V virtual bus to the build Add the Hyper-V virtual bus to the kernel build system. Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13 16:04:02 -07:00
obj-$(CONFIG_HYPERV) += hv/
Staging: vme: change to VME_BUS Turns out the m68k arch already has a CONFIG_VME, so use CONFIG_VME_BUS instead. Thanks to Geet Uytterhoeven for pointing this out. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-11 09:51:31 -07:00
obj-$(CONFIG_VME_BUS) += vme/
Staging: sep: Move the RAR support into staging where it is supposed to be Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-06 20:44:18 +01:00
obj-$(CONFIG_RAR_REGISTER) += rar/
Staging: sep: Upstream revision 3 of the security processor kernel driver Upstream revision 3 of the security processor kernel driver; now located in drivers/staging This revision adds an initial TODO file This driver no longer requires to have the firmware compiled in it with the CONFIG_EXTRA_FIRMWARE configuration option. Furthermore, we now have the right to distribute the firmware binaries. This is the Linux kernel driver for the Security Processor, which is a hardware device the provides cryptographic, secure storage, and key management services. Please be aware that this patch does not contain any encryption algorithm. It only transports data to and from user space applications to the security processor. Signed-off-by: Mark Allyn <mark.a.allyn@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-06 20:43:59 +01:00
obj-$(CONFIG_DX_SEP) += sep/
Reference in New Issue Copy Permalink