From 061dd21ca712cd7103c26ed77bb4a04d98930981 Mon Sep 17 00:00:00 2001 From: Billy Tsai Date: Mon, 26 Aug 2024 11:38:21 +0800 Subject: [PATCH] i3c/master: cmd_v1: Fix the rule for getting i3c mode Based on the I3C TCRI specification, the rules for determining the I3C mode are as follows: I3C SCL rate > 8MHz: use SDR0, as SDR1 has a maximum data rate of 8MHz I3C SCL rate > 6MHz: use SDR1, as SDR2 has a maximum data rate of 6MHz I3C SCL rate > 4MHz: use SDR2, as SDR3 has a maximum data rate of 4MHz I3C SCL rate > 2MHz: use SDR3, as SDR4 has a maximum data rate of 2MHz Otherwise, use SDR4 Signed-off-by: Billy Tsai Link: https://lore.kernel.org/r/20240826033821.175591-1-billy_tsai@aspeedtech.com Signed-off-by: Alexandre Belloni --- drivers/i3c/master/mipi-i3c-hci/cmd_v1.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/i3c/master/mipi-i3c-hci/cmd_v1.c b/drivers/i3c/master/mipi-i3c-hci/cmd_v1.c index 638b054d6c92..dd636094b07f 100644 --- a/drivers/i3c/master/mipi-i3c-hci/cmd_v1.c +++ b/drivers/i3c/master/mipi-i3c-hci/cmd_v1.c @@ -123,17 +123,15 @@ static enum hci_cmd_mode get_i3c_mode(struct i3c_hci *hci) { struct i3c_bus *bus = i3c_master_get_bus(&hci->master); - if (bus->scl_rate.i3c >= 12500000) - return MODE_I3C_SDR0; if (bus->scl_rate.i3c > 8000000) - return MODE_I3C_SDR1; + return MODE_I3C_SDR0; if (bus->scl_rate.i3c > 6000000) - return MODE_I3C_SDR2; + return MODE_I3C_SDR1; if (bus->scl_rate.i3c > 4000000) - return MODE_I3C_SDR3; + return MODE_I3C_SDR2; if (bus->scl_rate.i3c > 2000000) - return MODE_I3C_SDR4; - return MODE_I3C_Fm_FmP; + return MODE_I3C_SDR3; + return MODE_I3C_SDR4; } static enum hci_cmd_mode get_i2c_mode(struct i3c_hci *hci)