From 9a9e1be12c6d49e15429311714c4b1cc4ddcfe55 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 29 Sep 2022 15:26:06 +0200 Subject: [PATCH] ARM: sa1100: remove unused board files The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and Simpad machines were all marked as unused as there are no known users left. Remove all of these, along with references to them in defconfig files and drivers. Four machines remain now: Assabet, Collie (Zaurus SL5500), iPAQ H3600 and Jornada 720, each of which had one person still using them, with Collie also being supported in Qemu. Cc: Peter Chubb Cc: Stefan Eletzhofer Acked-by: Greg Kroah-Hartman Acked-by: Viresh Kumar Acked-by: Lee Jones Acked-by: Linus Walleij Signed-off-by: Arnd Bergmann --- MAINTAINERS | 11 - arch/arm/Kconfig | 6 - arch/arm/boot/compressed/head-sa1100.S | 4 - arch/arm/configs/badge4_defconfig | 105 ----- arch/arm/configs/cerfcube_defconfig | 73 --- arch/arm/configs/hackkit_defconfig | 48 -- arch/arm/configs/lart_defconfig | 64 --- arch/arm/configs/pleb_defconfig | 53 --- arch/arm/configs/shannon_defconfig | 45 -- arch/arm/configs/simpad_defconfig | 100 ----- arch/arm/mach-sa1100/Kconfig | 111 ----- arch/arm/mach-sa1100/Makefile | 21 - arch/arm/mach-sa1100/badge4.c | 338 -------------- arch/arm/mach-sa1100/cerf.c | 181 -------- arch/arm/mach-sa1100/h3100.c | 140 ------ arch/arm/mach-sa1100/hackkit.c | 184 -------- arch/arm/mach-sa1100/include/mach/badge4.h | 71 --- arch/arm/mach-sa1100/include/mach/cerf.h | 20 - .../arm/mach-sa1100/include/mach/nanoengine.h | 48 -- arch/arm/mach-sa1100/include/mach/shannon.h | 40 -- arch/arm/mach-sa1100/include/mach/simpad.h | 159 ------- arch/arm/mach-sa1100/lart.c | 177 -------- arch/arm/mach-sa1100/nanoengine.c | 136 ------ arch/arm/mach-sa1100/pci-nanoengine.c | 191 -------- arch/arm/mach-sa1100/pleb.c | 148 ------ arch/arm/mach-sa1100/shannon.c | 157 ------- arch/arm/mach-sa1100/simpad.c | 423 ------------------ drivers/cpufreq/sa1110-cpufreq.c | 6 - drivers/mfd/Kconfig | 2 +- drivers/pcmcia/sa1100_generic.c | 5 +- drivers/pcmcia/sa1100_h3600.c | 2 +- drivers/pcmcia/sa1111_generic.c | 4 - drivers/usb/host/ohci-sa1111.c | 5 +- drivers/video/fbdev/sa1100fb.c | 1 - 34 files changed, 4 insertions(+), 3075 deletions(-) delete mode 100644 arch/arm/configs/badge4_defconfig delete mode 100644 arch/arm/configs/cerfcube_defconfig delete mode 100644 arch/arm/configs/hackkit_defconfig delete mode 100644 arch/arm/configs/lart_defconfig delete mode 100644 arch/arm/configs/pleb_defconfig delete mode 100644 arch/arm/configs/shannon_defconfig delete mode 100644 arch/arm/configs/simpad_defconfig delete mode 100644 arch/arm/mach-sa1100/badge4.c delete mode 100644 arch/arm/mach-sa1100/cerf.c delete mode 100644 arch/arm/mach-sa1100/h3100.c delete mode 100644 arch/arm/mach-sa1100/hackkit.c delete mode 100644 arch/arm/mach-sa1100/include/mach/badge4.h delete mode 100644 arch/arm/mach-sa1100/include/mach/cerf.h delete mode 100644 arch/arm/mach-sa1100/include/mach/nanoengine.h delete mode 100644 arch/arm/mach-sa1100/include/mach/shannon.h delete mode 100644 arch/arm/mach-sa1100/include/mach/simpad.h delete mode 100644 arch/arm/mach-sa1100/lart.c delete mode 100644 arch/arm/mach-sa1100/nanoengine.c delete mode 100644 arch/arm/mach-sa1100/pci-nanoengine.c delete mode 100644 arch/arm/mach-sa1100/pleb.c delete mode 100644 arch/arm/mach-sa1100/shannon.c delete mode 100644 arch/arm/mach-sa1100/simpad.c diff --git a/MAINTAINERS b/MAINTAINERS index 370f438b1070..c03be77e8060 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2633,17 +2633,6 @@ S: Maintained W: http://hackndev.com F: arch/arm/mach-pxa/palmz72.* -ARM/PLEB SUPPORT -M: Peter Chubb -S: Maintained -W: http://www.disy.cse.unsw.edu.au/Hardware/PLEB - -ARM/PT DIGITAL BOARD PORT -M: Stefan Eletzhofer -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -W: http://www.armlinux.org.uk/ - ARM/QUALCOMM SUPPORT M: Andy Gross M: Bjorn Andersson diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2efd0d91a0a0..7742b35fe23a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -927,12 +927,6 @@ config ISA config ISA_DMA_API bool -config PCI_NANOENGINE - bool "BSE nanoEngine PCI support" - depends on SA1100_NANOENGINE - help - Enable PCI on the BSE nanoEngine board. - config ARM_ERRATA_814220 bool "ARM errata: Cache maintenance by set/way operations can execute out of order" depends on CPU_V7 diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S index 95abdd850fe3..23eae1a65064 100644 --- a/arch/arm/boot/compressed/head-sa1100.S +++ b/arch/arm/boot/compressed/head-sa1100.S @@ -19,10 +19,6 @@ __SA1100_start: @ Preserve r8/r7 i.e. kernel entry values #ifdef CONFIG_SA1100_COLLIE mov r7, #MACH_TYPE_COLLIE -#endif -#ifdef CONFIG_SA1100_SIMPAD - @ UNTIL we've something like an open bootldr - mov r7, #MACH_TYPE_SIMPAD @should be 87 #endif mrc p15, 0, r0, c1, c0, 0 @ read control reg ands r0, r0, #0x0d diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig deleted file mode 100644 index 337e5c9718ae..000000000000 --- a/arch/arm/configs/badge4_defconfig +++ /dev/null @@ -1,105 +0,0 @@ -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -CONFIG_ARCH_MULTI_V4=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_SA1100=y -CONFIG_SA1100_BADGE4=y -CONFIG_UNUSED_BOARD_FILES=y -CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3" -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_FPE_NWFPE=y -CONFIG_MODULES=y -CONFIG_MODVERSIONS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BINFMT_MISC=m -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_BT=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIVHCI=m -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_CFI_I2 is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_RAM=y -CONFIG_MTD_SA1100=y -CONFIG_PARPORT=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=y -CONFIG_NETDEVICES=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_USBNET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_SA1100=y -CONFIG_SERIAL_SA1100_CONSOLE=y -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_ELEKTOR=m -CONFIG_WATCHDOG=y -CONFIG_SOFT_WATCHDOG=m -CONFIG_SA1100_WATCHDOG=m -CONFIG_SOUND=y -CONFIG_SOUND_PRIME=y -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_USS720=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=m -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=m -CONFIG_MINIX_FS=m -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_SMB_FS=m -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig deleted file mode 100644 index 9ada868e2648..000000000000 --- a/arch/arm/configs/cerfcube_defconfig +++ /dev/null @@ -1,73 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_ARCH_MULTI_V4=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_SA1100=y -CONFIG_SA1100_CERF=y -CONFIG_SA1100_CERF_FLASH_16MB=y -CONFIG_UNUSED_BOARD_FILES=y -CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc" -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_FPE_FASTFPE=y -CONFIG_PM=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_IPV6 is not set -CONFIG_PCCARD=m -CONFIG_PCMCIA_SA1100=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_SA1100=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_RAM=m -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_SA1100=y -CONFIG_SERIAL_SA1100_CONSOLE=y -CONFIG_WATCHDOG=y -CONFIG_SA1100_WATCHDOG=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_ROMFS_FS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_NFSD=m -CONFIG_NFSD_V4=y -CONFIG_SMB_FS=m -CONFIG_NLS=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_ISO8859_1=m -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig deleted file mode 100644 index 3c91a851fd08..000000000000 --- a/arch/arm/configs/hackkit_defconfig +++ /dev/null @@ -1,48 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_ARCH_MULTI_V4=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_SA1100=y -CONFIG_SA1100_HACKKIT=y -CONFIG_UNUSED_BOARD_FILES=y -CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell" -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_FPE_NWFPE=y -CONFIG_MODULES=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_SYN_COOKIES=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=3 -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIAL_SA1100=y -CONFIG_SERIAL_SA1100_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_EXT2_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig deleted file mode 100644 index 916177d07a39..000000000000 --- a/arch/arm/configs/lart_defconfig +++ /dev/null @@ -1,64 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_ARCH_MULTI_V4=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_SA1100=y -CONFIG_SA1100_LART=y -CONFIG_UNUSED_BOARD_FILES=y -CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram" -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_MODULES=y -CONFIG_NET=y -CONFIG_PACKET=m -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_SYN_COOKIES=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=1 -CONFIG_MTD_BLOCK=y -CONFIG_MTD_LART=y -CONFIG_BLK_DEV_RAM=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_NET_ETHERNET=y -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_ASYNC=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SERIAL_SA1100=y -CONFIG_SERIAL_SA1100_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=m -CONFIG_REISERFS_FS=m -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_UDF_FS=m -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=1 -CONFIG_CRAMFS=m -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFSD=m -CONFIG_NLS=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_UTF8=m -CONFIG_DEBUG_USER=y -CONFIG_CRC32=m diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig deleted file mode 100644 index fd2667873273..000000000000 --- a/arch/arm/configs/pleb_defconfig +++ /dev/null @@ -1,53 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_HOTPLUG is not set -# CONFIG_SHMEM is not set -CONFIG_ARCH_MULTI_V4=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_SA1100=y -CONFIG_SA1100_PLEB=y -CONFIG_UNUSED_BOARD_FILES=y -CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M" -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_FPE_NWFPE=y -CONFIG_MODULES=y -# CONFIG_SWAP is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_SYN_COOKIES=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_SA1100=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_SA1100=y -CONFIG_SERIAL_SA1100_CONSOLE=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_DNOTIFY is not set -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NLS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig deleted file mode 100644 index dfcea70b8034..000000000000 --- a/arch/arm/configs/shannon_defconfig +++ /dev/null @@ -1,45 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_ARCH_MULTI_V4=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_SA1100=y -CONFIG_SA1100_SHANNON=y -CONFIG_UNUSED_BOARD_FILES=y -CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc" -CONFIG_FPE_NWFPE=y -CONFIG_MODULES=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_PCCARD=y -CONFIG_PCMCIA_SA1100=y -CONFIG_MTD=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_SA1100=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_PCNET=y -CONFIG_PCMCIA_SMC91C92=y -CONFIG_SERIAL_SA1100=y -CONFIG_SERIAL_SA1100_CONSOLE=y -CONFIG_WATCHDOG=y -CONFIG_SA1100_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_SA1100=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_JFFS2_FS=y -CONFIG_MINIX_FS=y -CONFIG_NFS_FS=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig deleted file mode 100644 index 4e00a4c2c287..000000000000 --- a/arch/arm/configs/simpad_defconfig +++ /dev/null @@ -1,100 +0,0 @@ -CONFIG_LOCALVERSION="oe1" -CONFIG_SYSVIPC=y -CONFIG_PREEMPT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_ARCH_MULTI_V4=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_SA1100=y -CONFIG_SA1100_SIMPAD=y -CONFIG_UNUSED_BOARD_FILES=y -CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2" -CONFIG_FPE_NWFPE=y -CONFIG_MODULES=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_BT=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_PCCARD=y -CONFIG_PCMCIA_SA1100=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_CFI_I2 is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_RAM=y -CONFIG_MTD_SA1100=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_RAM=m -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_INPUT_MOUSEDEV_SCREEN_X=800 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600 -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_EVBUG=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO=m -CONFIG_SERIAL_SA1100=y -CONFIG_SERIAL_SA1100_CONSOLE=y -CONFIG_FB=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SOUND=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -CONFIG_REISERFS_FS=m -CONFIG_REISERFS_PROC_INFO=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=m -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_SMB_FS=m -CONFIG_NLS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_15=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 8b6360e363d1..0fb4c24cfad5 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -41,35 +41,6 @@ config ASSABET_NEPONSET Microprocessor Development Board (Assabet) with the SA-1111 Development Board (Nepon). -config SA1100_CERF - bool "CerfBoard" - depends on UNUSED_BOARD_FILES - select ARM_SA1110_CPUFREQ - select LEDS_GPIO_REGISTER - help - The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). - More information is available at: - . - - Say Y if configuring for an Intrinsyc CerfBoard. - Say N otherwise. - -choice - prompt "Cerf Flash available" - depends on SA1100_CERF - default SA1100_CERF_FLASH_8MB - -config SA1100_CERF_FLASH_8MB - bool "8MB" - -config SA1100_CERF_FLASH_16MB - bool "16MB" - -config SA1100_CERF_FLASH_32MB - bool "32MB" - -endchoice - config SA1100_COLLIE bool "Sharp Zaurus SL5500" # FIXME: select ARM_SA11x0_CPUFREQ @@ -79,16 +50,6 @@ config SA1100_COLLIE help Say Y here to support the Sharp Zaurus SL5500 PDAs. -config SA1100_H3100 - bool "Compaq iPAQ H3100" - depends on UNUSED_BOARD_FILES - select ARM_SA1110_CPUFREQ - select HTC_EGPIO - select MFD_IPAQ_MICRO - help - Say Y here if you intend to run this kernel on the Compaq iPAQ - H3100 handheld computer. - config SA1100_H3600 bool "Compaq iPAQ H3600/H3700" select ARM_SA1110_CPUFREQ @@ -98,15 +59,6 @@ config SA1100_H3600 Say Y here if you intend to run this kernel on the Compaq iPAQ H3600 and H3700 handheld computers. -config SA1100_BADGE4 - bool "HP Labs BadgePAD 4" - depends on UNUSED_BOARD_FILES - select ARM_SA1100_CPUFREQ - select SA1111 - help - Say Y here if you want to build a kernel for the HP Laboratories - BadgePAD 4. - config SA1100_JORNADA720 bool "HP Jornada 720" # FIXME: select ARM_SA11x0_CPUFREQ @@ -126,71 +78,8 @@ config SA1100_JORNADA720_SSP keyboard, touchscreen, backlight and battery. This driver also activates the generic SSP which it extends. -config SA1100_HACKKIT - bool "HackKit Core CPU Board" - depends on UNUSED_BOARD_FILES - select ARM_SA1100_CPUFREQ - help - Say Y here to support the HackKit Core CPU Board - ; - -config SA1100_LART - bool "LART" - depends on UNUSED_BOARD_FILES - select ARM_SA1100_CPUFREQ - help - Say Y here if you are using the Linux Advanced Radio Terminal - (also known as the LART). See for - information on the LART. - -config SA1100_NANOENGINE - bool "nanoEngine" - depends on UNUSED_BOARD_FILES - select ARM_SA1110_CPUFREQ - select FORCE_PCI - select PCI_NANOENGINE - help - Say Y here if you are using the Bright Star Engineering nanoEngine. - See for information - on the BSE nanoEngine. - -config SA1100_PLEB - bool "PLEB" - depends on UNUSED_BOARD_FILES - select ARM_SA1100_CPUFREQ - help - Say Y here if you are using version 1 of the Portable Linux - Embedded Board (also known as PLEB). - See - for more information. - -config SA1100_SHANNON - bool "Shannon" - depends on UNUSED_BOARD_FILES - select ARM_SA1100_CPUFREQ - select REGULATOR - select REGULATOR_FIXED_VOLTAGE - help - The Shannon (also known as a Tuxscreen, and also as a IS2630) was a - limited edition webphone produced by Philips. The Shannon is a SA1100 - platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots, - and a telco interface. - -config SA1100_SIMPAD - bool "Simpad" - depends on UNUSED_BOARD_FILES - select ARM_SA1110_CPUFREQ - help - The SIEMENS webpad SIMpad is based on the StrongARM 1110. There - are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB - FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a - PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same - like CL4 in additional it has a PCMCIA-Slot. For more information - visit or . - config SA1100_SSP tristate "Generic PIO SSP" - depends on UNUSED_BOARD_FILES help Say Y here to enable support for the generic PIO SSP driver. This isn't for audio support, but for attached sensors and diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 28c1cae0053f..b5816d675152 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -9,32 +9,11 @@ obj-y := clock.o generic.o #nmi-oopser.o # Specific board support obj-$(CONFIG_SA1100_ASSABET) += assabet.o obj-$(CONFIG_ASSABET_NEPONSET) += neponset.o - -obj-$(CONFIG_SA1100_BADGE4) += badge4.o - -obj-$(CONFIG_SA1100_CERF) += cerf.o - obj-$(CONFIG_SA1100_COLLIE) += collie.o - -obj-$(CONFIG_SA1100_H3100) += h3100.o h3xxx.o obj-$(CONFIG_SA1100_H3600) += h3600.o h3xxx.o - -obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o - obj-$(CONFIG_SA1100_JORNADA720) += jornada720.o obj-$(CONFIG_SA1100_JORNADA720_SSP) += jornada720_ssp.o -obj-$(CONFIG_SA1100_LART) += lart.o - -obj-$(CONFIG_SA1100_NANOENGINE) += nanoengine.o -obj-$(CONFIG_PCI_NANOENGINE) += pci-nanoengine.o - -obj-$(CONFIG_SA1100_PLEB) += pleb.o - -obj-$(CONFIG_SA1100_SHANNON) += shannon.o - -obj-$(CONFIG_SA1100_SIMPAD) += simpad.o - # Miscellaneous functions obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_SA1100_SSP) += ssp.o diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c deleted file mode 100644 index de79f3502045..000000000000 --- a/arch/arm/mach-sa1100/badge4.c +++ /dev/null @@ -1,338 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-sa1100/badge4.c - * - * BadgePAD 4 specific initialization - * - * Tim Connors - * Christopher Hoover - * - * Copyright (C) 2002 Hewlett-Packard Company - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include - -#include - -#include "generic.h" - -static struct resource sa1111_resources[] = { - [0] = DEFINE_RES_MEM(BADGE4_SA1111_BASE, 0x2000), - [1] = DEFINE_RES_IRQ(BADGE4_IRQ_GPIO_SA1111), -}; - -static int badge4_sa1111_enable(void *data, unsigned devid) -{ - if (devid == SA1111_DEVID_USB) - badge4_set_5V(BADGE4_5V_USB, 1); - return 0; -} - -static void badge4_sa1111_disable(void *data, unsigned devid) -{ - if (devid == SA1111_DEVID_USB) - badge4_set_5V(BADGE4_5V_USB, 0); -} - -static struct sa1111_platform_data sa1111_info = { - .disable_devs = SA1111_DEVID_PS2_MSE, - .enable = badge4_sa1111_enable, - .disable = badge4_sa1111_disable, -}; - -static u64 sa1111_dmamask = 0xffffffffUL; - -static struct platform_device sa1111_device = { - .name = "sa1111", - .id = 0, - .dev = { - .dma_mask = &sa1111_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &sa1111_info, - }, - .num_resources = ARRAY_SIZE(sa1111_resources), - .resource = sa1111_resources, -}; - -/* LEDs */ -struct gpio_led badge4_gpio_leds[] = { - { - .name = "badge4:red", - .default_trigger = "heartbeat", - .gpio = 7, - }, - { - .name = "badge4:green", - .default_trigger = "cpu0", - .gpio = 9, - }, -}; - -static struct gpio_led_platform_data badge4_gpio_led_info = { - .leds = badge4_gpio_leds, - .num_leds = ARRAY_SIZE(badge4_gpio_leds), -}; - -static struct platform_device badge4_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &badge4_gpio_led_info, - } -}; - -static struct platform_device *devices[] __initdata = { - &sa1111_device, - &badge4_leds, -}; - -static int __init badge4_sa1111_init(void) -{ - /* - * Ensure that the memory bus request/grant signals are setup, - * and the grant is held in its inactive state - */ - sa1110_mb_disable(); - - /* - * Probe for SA1111. - */ - return platform_add_devices(devices, ARRAY_SIZE(devices)); -} - - -/* - * 1 x Intel 28F320C3 Advanced+ Boot Block Flash (32 Mi bit) - * Eight 4 KiW Parameter Bottom Blocks (64 KiB) - * Sixty-three 32 KiW Main Blocks (4032 Ki b) - * - * - * - * 1 x Intel 28F640C3 Advanced+ Boot Block Flash (64 Mi bit) - * Eight 4 KiW Parameter Bottom Blocks (64 KiB) - * One-hundred-twenty-seven 32 KiW Main Blocks (8128 Ki b) - */ -static struct mtd_partition badge4_partitions[] = { - { - .name = "BLOB boot loader", - .offset = 0, - .size = 0x0000A000 - }, { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = 0x00006000 - }, { - .name = "root", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL - } -}; - -static struct flash_platform_data badge4_flash_data = { - .map_name = "cfi_probe", - .parts = badge4_partitions, - .nr_parts = ARRAY_SIZE(badge4_partitions), -}; - -static struct resource badge4_flash_resource = - DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_64M); - -static int five_v_on __initdata = 0; - -static int __init five_v_on_setup(char *ignore) -{ - five_v_on = 1; - return 1; -} -__setup("five_v_on", five_v_on_setup); - - -static int __init badge4_init(void) -{ - int ret; - - if (!machine_is_badge4()) - return -ENODEV; - - /* LCD */ - GPCR = (BADGE4_GPIO_LGP2 | BADGE4_GPIO_LGP3 | - BADGE4_GPIO_LGP4 | BADGE4_GPIO_LGP5 | - BADGE4_GPIO_LGP6 | BADGE4_GPIO_LGP7 | - BADGE4_GPIO_LGP8 | BADGE4_GPIO_LGP9 | - BADGE4_GPIO_GPA_VID | BADGE4_GPIO_GPB_VID | - BADGE4_GPIO_GPC_VID); - GPDR &= ~BADGE4_GPIO_INT_VID; - GPDR |= (BADGE4_GPIO_LGP2 | BADGE4_GPIO_LGP3 | - BADGE4_GPIO_LGP4 | BADGE4_GPIO_LGP5 | - BADGE4_GPIO_LGP6 | BADGE4_GPIO_LGP7 | - BADGE4_GPIO_LGP8 | BADGE4_GPIO_LGP9 | - BADGE4_GPIO_GPA_VID | BADGE4_GPIO_GPB_VID | - BADGE4_GPIO_GPC_VID); - - /* SDRAM SPD i2c */ - GPCR = (BADGE4_GPIO_SDSDA | BADGE4_GPIO_SDSCL); - GPDR |= (BADGE4_GPIO_SDSDA | BADGE4_GPIO_SDSCL); - - /* uart */ - GPCR = (BADGE4_GPIO_UART_HS1 | BADGE4_GPIO_UART_HS2); - GPDR |= (BADGE4_GPIO_UART_HS1 | BADGE4_GPIO_UART_HS2); - - /* CPLD muxsel0 input for mux/adc chip select */ - GPCR = BADGE4_GPIO_MUXSEL0; - GPDR |= BADGE4_GPIO_MUXSEL0; - - /* test points: J5, J6 as inputs, J7 outputs */ - GPDR &= ~(BADGE4_GPIO_TESTPT_J5 | BADGE4_GPIO_TESTPT_J6); - GPCR = BADGE4_GPIO_TESTPT_J7; - GPDR |= BADGE4_GPIO_TESTPT_J7; - - /* 5V supply rail. */ - GPCR = BADGE4_GPIO_PCMEN5V; /* initially off */ - GPDR |= BADGE4_GPIO_PCMEN5V; - - /* CPLD sdram type inputs; set up by blob */ - //GPDR |= (BADGE4_GPIO_SDTYP1 | BADGE4_GPIO_SDTYP0); - printk(KERN_DEBUG __FILE__ ": SDRAM CPLD typ1=%d typ0=%d\n", - !!(GPLR & BADGE4_GPIO_SDTYP1), - !!(GPLR & BADGE4_GPIO_SDTYP0)); - - /* SA1111 reset pin; set up by blob */ - //GPSR = BADGE4_GPIO_SA1111_NRST; - //GPDR |= BADGE4_GPIO_SA1111_NRST; - - - /* power management cruft */ - PGSR = 0; - PWER = 0; - PCFR = 0; - PSDR = 0; - - PWER |= PWER_GPIO26; /* wake up on an edge from TESTPT_J5 */ - PWER |= PWER_RTC; /* wake up if rtc fires */ - - /* drive sa1111_nrst during sleep */ - PGSR |= BADGE4_GPIO_SA1111_NRST; - /* drive CPLD as is during sleep */ - PGSR |= (GPLR & (BADGE4_GPIO_SDTYP0|BADGE4_GPIO_SDTYP1)); - - - /* Now bring up the SA-1111. */ - ret = badge4_sa1111_init(); - if (ret < 0) - printk(KERN_ERR - "%s: SA-1111 initialization failed (%d)\n", - __func__, ret); - - - /* maybe turn on 5v0 from the start */ - badge4_set_5V(BADGE4_5V_INITIALLY, five_v_on); - - sa11x0_register_mtd(&badge4_flash_data, &badge4_flash_resource, 1); - - return 0; -} - -arch_initcall(badge4_init); - - -static unsigned badge4_5V_bitmap = 0; - -void badge4_set_5V(unsigned subsystem, int on) -{ - unsigned long flags; - unsigned old_5V_bitmap; - - local_irq_save(flags); - - old_5V_bitmap = badge4_5V_bitmap; - - if (on) { - badge4_5V_bitmap |= subsystem; - } else { - badge4_5V_bitmap &= ~subsystem; - } - - /* detect on->off and off->on transitions */ - if ((!old_5V_bitmap) && (badge4_5V_bitmap)) { - /* was off, now on */ - printk(KERN_INFO "%s: enabling 5V supply rail\n", __func__); - GPSR = BADGE4_GPIO_PCMEN5V; - } else if ((old_5V_bitmap) && (!badge4_5V_bitmap)) { - /* was on, now off */ - printk(KERN_INFO "%s: disabling 5V supply rail\n", __func__); - GPCR = BADGE4_GPIO_PCMEN5V; - } - - local_irq_restore(flags); -} -EXPORT_SYMBOL(badge4_set_5V); - - -static struct map_desc badge4_io_desc[] __initdata = { - { /* SRAM bank 1 */ - .virtual = 0xf1000000, - .pfn = __phys_to_pfn(0x08000000), - .length = 0x00100000, - .type = MT_DEVICE - }, { /* SRAM bank 2 */ - .virtual = 0xf2000000, - .pfn = __phys_to_pfn(0x10000000), - .length = 0x00100000, - .type = MT_DEVICE - } -}; - -static void -badge4_uart_pm(struct uart_port *port, u_int state, u_int oldstate) -{ - if (!state) { - Ser1SDCR0 |= SDCR0_UART; - } -} - -static struct sa1100_port_fns badge4_port_fns __initdata = { - .pm = badge4_uart_pm, -}; - -static void __init badge4_map_io(void) -{ - sa1100_map_io(); - iotable_init(badge4_io_desc, ARRAY_SIZE(badge4_io_desc)); - - sa1100_register_uart_fns(&badge4_port_fns); - sa1100_register_uart(0, 3); - sa1100_register_uart(1, 1); -} - -MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4") - .atag_offset = 0x100, - .map_io = badge4_map_io, - .nr_irqs = SA1100_NR_IRQS, - .init_irq = sa1100_init_irq, - .init_late = sa11x0_init_late, - .init_time = sa1100_timer_init, -#ifdef CONFIG_SA1111 - .dma_zone_size = SZ_1M, -#endif - .restart = sa11x0_restart, -MACHINE_END diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c deleted file mode 100644 index f9243a3fd69c..000000000000 --- a/arch/arm/mach-sa1100/cerf.c +++ /dev/null @@ -1,181 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-sa1100/cerf.c - * - * Apr-2003 : Removed some old PDA crud [FB] - * Oct-2003 : Added uart2 resource [FB] - * Jan-2004 : Removed io map for flash [FB] - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include "generic.h" - -static struct resource cerfuart2_resources[] = { - [0] = DEFINE_RES_MEM(0x80030000, SZ_64K), -}; - -static struct platform_device cerfuart2_device = { - .name = "sa11x0-uart", - .id = 2, - .num_resources = ARRAY_SIZE(cerfuart2_resources), - .resource = cerfuart2_resources, -}; - -/* Compact Flash */ -static struct gpiod_lookup_table cerf_cf_gpio_table = { - .dev_id = "sa11x0-pcmcia.1", - .table = { - GPIO_LOOKUP("gpio", 19, "bvd2", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio", 20, "bvd1", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio", 21, "reset", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio", 22, "ready", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio", 23, "detect", GPIO_ACTIVE_LOW), - { }, - }, -}; - -/* LEDs */ -struct gpio_led cerf_gpio_leds[] = { - { - .name = "cerf:d0", - .default_trigger = "heartbeat", - .gpio = 0, - }, - { - .name = "cerf:d1", - .default_trigger = "cpu0", - .gpio = 1, - }, - { - .name = "cerf:d2", - .default_trigger = "default-on", - .gpio = 2, - }, - { - .name = "cerf:d3", - .default_trigger = "default-on", - .gpio = 3, - }, - -}; - -static struct gpio_led_platform_data cerf_gpio_led_info = { - .leds = cerf_gpio_leds, - .num_leds = ARRAY_SIZE(cerf_gpio_leds), -}; - -static struct platform_device *cerf_devices[] __initdata = { - &cerfuart2_device, -}; - -#ifdef CONFIG_SA1100_CERF_FLASH_32MB -# define CERF_FLASH_SIZE 0x02000000 -#elif defined CONFIG_SA1100_CERF_FLASH_16MB -# define CERF_FLASH_SIZE 0x01000000 -#elif defined CONFIG_SA1100_CERF_FLASH_8MB -# define CERF_FLASH_SIZE 0x00800000 -#else -# error "Undefined flash size for CERF" -#endif - -static struct mtd_partition cerf_partitions[] = { - { - .name = "Bootloader", - .size = 0x00020000, - .offset = 0x00000000, - }, { - .name = "Params", - .size = 0x00040000, - .offset = 0x00020000, - }, { - .name = "Kernel", - .size = 0x00100000, - .offset = 0x00060000, - }, { - .name = "Filesystem", - .size = CERF_FLASH_SIZE-0x00160000, - .offset = 0x00160000, - } -}; - -static struct flash_platform_data cerf_flash_data = { - .map_name = "cfi_probe", - .parts = cerf_partitions, - .nr_parts = ARRAY_SIZE(cerf_partitions), -}; - -static struct resource cerf_flash_resource = - DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M); - -static void __init cerf_init_irq(void) -{ - sa1100_init_irq(); - irq_set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING); -} - -static struct map_desc cerf_io_desc[] __initdata = { - { /* Crystal Ethernet Chip */ - .virtual = 0xf0000000, - .pfn = __phys_to_pfn(0x08000000), - .length = 0x00100000, - .type = MT_DEVICE - } -}; - -static void __init cerf_map_io(void) -{ - sa1100_map_io(); - iotable_init(cerf_io_desc, ARRAY_SIZE(cerf_io_desc)); - - sa1100_register_uart(0, 3); - sa1100_register_uart(1, 2); /* disable this and the uart2 device for sa1100_fir */ - sa1100_register_uart(2, 1); -} - -static struct mcp_plat_data cerf_mcp_data = { - .mccr0 = MCCR0_ADM, - .sclk_rate = 11981000, -}; - -static void __init cerf_init(void) -{ - sa11x0_ppc_configure_mcp(); - platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices)); - gpio_led_register_device(-1, &cerf_gpio_led_info); - sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1); - sa11x0_register_mcp(&cerf_mcp_data); - sa11x0_register_pcmcia(1, &cerf_cf_gpio_table); -} - -MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube") - /* Maintainer: support@intrinsyc.com */ - .map_io = cerf_map_io, - .nr_irqs = SA1100_NR_IRQS, - .init_irq = cerf_init_irq, - .init_time = sa1100_timer_init, - .init_machine = cerf_init, - .init_late = sa11x0_init_late, - .restart = sa11x0_restart, -MACHINE_END diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c deleted file mode 100644 index 51eaeeaf3f10..000000000000 --- a/arch/arm/mach-sa1100/h3100.c +++ /dev/null @@ -1,140 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Support for Compaq iPAQ H3100 handheld computer - * - * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks) - * Copyright (c) 2009 Dmitry Artamonow - */ - -#include -#include -#include - -#include