Kernel/linux-next
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git synced 2025-01-09 15:29:16 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

drivers: nvmem: Fix voltage settings for QTI qfprom-efuse

Browse Source 
QFPROM controller hardware requires 1.8V min for fuse blowing.
So, this change sets the voltage to 1.8V, required to blow the fuse
for qfprom-efuse controller.

To disable fuse blowing, we set the voltage to 0V since this may
be a shared rail and may be able to run at a lower rate when we're
not blowing fuses.

Fixes: 93b4e49f8c86 ("nvmem: qfprom: Add fuse blowing support")
Reported-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210330111241.19401-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Ravi Kumar Bokka 2021-03-30 12:12:34 +01:00 committed by Greg Kroah-Hartman
parent e050f160d4
commit 9ec4f4b0e9
1 changed files with 21 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
drivers/nvmem/qfprom.c
View File

@ -127,6 +127,16 @@ static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
{
int ret;
/*
* This may be a shared rail and may be able to run at a lower rate
* when we're not blowing fuses. At the moment, the regulator framework
* applies voltage constraints even on disabled rails, so remove our
* constraints and allow the rail to be adjusted by other users.
*/
ret = regulator_set_voltage(priv->vcc, 0, INT_MAX);
if (ret)
dev_warn(priv->dev, "Failed to set 0 voltage (ignoring)\n");
ret = regulator_disable(priv->vcc);
if (ret)
dev_warn(priv->dev, "Failed to disable regulator (ignoring)\n");
@ -172,6 +182,17 @@ static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
goto err_clk_prepared;
}
/*
* Hardware requires 1.8V min for fuse blowing; this may be
* a rail shared do don't specify a max--regulator constraints
* will handle.
*/
ret = regulator_set_voltage(priv->vcc, 1800000, INT_MAX);
if (ret) {
dev_err(priv->dev, "Failed to set 1.8 voltage\n");
goto err_clk_rate_set;
}
ret = regulator_enable(priv->vcc);
if (ret) {
dev_err(priv->dev, "Failed to enable regulator\n");