Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
	drivers/net/wireless/rtlwifi/pci.c
	net/netfilter/ipvs/ip_vs_core.c

CREDITS

@@ -518,6 +518,14 @@ N: Zach Brown
 E: zab@zabbo.net
 D: maestro pci sound
 
+M: David Brownell
+D: Kernel engineer, mentor, and friend.  Maintained USB EHCI and
+D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few
+D: device drivers.  His encouragement also helped many engineers get
+D: started working on the Linux kernel.  David passed away in early
+D: 2011, and will be greatly missed.
+W: https://lkml.org/lkml/2011/4/5/36
+
 N: Gary Brubaker
 E: xavyer@ix.netcom.com
 D: USB Serial Empeg Empeg-car Mark I/II Driver

Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870

@@ -0,0 +1,56 @@
+What:		/sys/class/backlight/<backlight>/<ambient light zone>_max
+What:		/sys/class/backlight/<backlight>/l1_daylight_max
+What:		/sys/class/backlight/<backlight>/l2_bright_max
+What:		/sys/class/backlight/<backlight>/l3_office_max
+What:		/sys/class/backlight/<backlight>/l4_indoor_max
+What:		/sys/class/backlight/<backlight>/l5_dark_max
+Date:		Mai 2011
+KernelVersion:	2.6.40
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Control the maximum brightness for <ambient light zone>
+		on this <backlight>. Values are between 0 and 127. This file
+		will also show the brightness level stored for this
+		<ambient light zone>.
+
+What:		/sys/class/backlight/<backlight>/<ambient light zone>_dim
+What:		/sys/class/backlight/<backlight>/l2_bright_dim
+What:		/sys/class/backlight/<backlight>/l3_office_dim
+What:		/sys/class/backlight/<backlight>/l4_indoor_dim
+What:		/sys/class/backlight/<backlight>/l5_dark_dim
+Date:		Mai 2011
+KernelVersion:	2.6.40
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Control the dim brightness for <ambient light zone>
+		on this <backlight>. Values are between 0 and 127, typically
+		set to 0. Full off when the backlight is disabled.
+		This file will also show the dim brightness level stored for
+		this <ambient light zone>.
+
+What:		/sys/class/backlight/<backlight>/ambient_light_level
+Date:		Mai 2011
+KernelVersion:	2.6.40
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Get conversion value of the light sensor.
+		This value is updated every 80 ms (when the light sensor
+		is enabled). Returns integer between 0 (dark) and
+		8000 (max ambient brightness)
+
+What:		/sys/class/backlight/<backlight>/ambient_light_zone
+Date:		Mai 2011
+KernelVersion:	2.6.40
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Get/Set current ambient light zone. Reading returns
+		integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark).
+		Writing a value between 1..5 forces the backlight controller
+		to enter the corresponding ambient light zone.
+		Writing 0 returns to normal/automatic ambient light level
+		operation. The ambient light sensing feature on these devices
+		is an extension to the API documented in
+		Documentation/ABI/stable/sysfs-class-backlight.
+		It can be enabled by writing the value stored in
+		/sys/class/backlight/<backlight>/max_brightness to
+		/sys/class/backlight/<backlight>/brightness.

Documentation/accounting/cgroupstats.txt

@@ -21,7 +21,7 @@ information will not be available.
 To extract cgroup statistics a utility very similar to getdelays.c
 has been developed, the sample output of the utility is shown below
 
-~/balbir/cgroupstats # ./getdelays  -C "/cgroup/a"
+~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup/a"
 sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0
-~/balbir/cgroupstats # ./getdelays  -C "/cgroup"
+~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup"
 sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2

Documentation/cgroups/blkio-controller.txt

@@ -28,16 +28,19 @@ cgroups. Here is what you can do.
 - Enable group scheduling in CFQ
 	CONFIG_CFQ_GROUP_IOSCHED=y
 
-- Compile and boot into kernel and mount IO controller (blkio).
+- Compile and boot into kernel and mount IO controller (blkio); see
+  cgroups.txt, Why are cgroups needed?.
 
-	mount -t cgroup -o blkio none /cgroup
+	mount -t tmpfs cgroup_root /sys/fs/cgroup
+	mkdir /sys/fs/cgroup/blkio
+	mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
 
 - Create two cgroups
-	mkdir -p /cgroup/test1/ /cgroup/test2
+	mkdir -p /sys/fs/cgroup/blkio/test1/ /sys/fs/cgroup/blkio/test2
 
 - Set weights of group test1 and test2
-	echo 1000 > /cgroup/test1/blkio.weight
+	echo 1000 > /sys/fs/cgroup/blkio/test1/blkio.weight
-	echo 500 > /cgroup/test2/blkio.weight
+	echo 500 > /sys/fs/cgroup/blkio/test2/blkio.weight
 
 - Create two same size files (say 512MB each) on same disk (file1, file2) and
   launch two dd threads in different cgroup to read those files.
@@ -46,12 +49,12 @@ cgroups. Here is what you can do.
 	echo 3 > /proc/sys/vm/drop_caches
 
 	dd if=/mnt/sdb/zerofile1 of=/dev/null &
-	echo $! > /cgroup/test1/tasks
+	echo $! > /sys/fs/cgroup/blkio/test1/tasks
-	cat /cgroup/test1/tasks
+	cat /sys/fs/cgroup/blkio/test1/tasks
 
 	dd if=/mnt/sdb/zerofile2 of=/dev/null &
-	echo $! > /cgroup/test2/tasks
+	echo $! > /sys/fs/cgroup/blkio/test2/tasks
-	cat /cgroup/test2/tasks
+	cat /sys/fs/cgroup/blkio/test2/tasks
 
 - At macro level, first dd should finish first. To get more precise data, keep
   on looking at (with the help of script), at blkio.disk_time and
@@ -68,13 +71,13 @@ Throttling/Upper Limit policy
 - Enable throttling in block layer
 	CONFIG_BLK_DEV_THROTTLING=y
 
-- Mount blkio controller
+- Mount blkio controller (see cgroups.txt, Why are cgroups needed?)
-        mount -t cgroup -o blkio none /cgroup/blkio
+        mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
 
 - Specify a bandwidth rate on particular device for root group. The format
   for policy is "<major>:<minor>  <byes_per_second>".
 
-        echo "8:16  1048576" > /cgroup/blkio/blkio.read_bps_device
+        echo "8:16  1048576" > /sys/fs/cgroup/blkio/blkio.read_bps_device
 
   Above will put a limit of 1MB/second on reads happening for root group
   on device having major/minor number 8:16.
@@ -108,7 +111,7 @@ Hierarchical Cgroups
   CFQ and throttling will practically treat all groups at same level.
 
 				pivot
-			     /  |   \  \
+			     /  /   \  \
 			root  test1 test2  test3
 
   Down the line we can implement hierarchical accounting/control support
@@ -149,7 +152,7 @@ Proportional weight policy files
 
 	  Following is the format.
 
-	  #echo dev_maj:dev_minor weight > /path/to/cgroup/blkio.weight_device
+	  # echo dev_maj:dev_minor weight > blkio.weight_device
 	  Configure weight=300 on /dev/sdb (8:16) in this cgroup
 	  # echo 8:16 300 > blkio.weight_device
 	  # cat blkio.weight_device

Documentation/cgroups/cgroups.txt

@@ -138,11 +138,11 @@ With the ability to classify tasks differently for different resources
 the admin can easily set up a script which receives exec notifications
 and depending on who is launching the browser he can
 
-       # echo browser_pid > /mnt/<restype>/<userclass>/tasks
+    # echo browser_pid > /sys/fs/cgroup/<restype>/<userclass>/tasks
 
 With only a single hierarchy, he now would potentially have to create
 a separate cgroup for every browser launched and associate it with
-approp network and other resource class.  This may lead to
+appropriate network and other resource class.  This may lead to
 proliferation of such cgroups.
 
 Also lets say that the administrator would like to give enhanced network
@@ -153,9 +153,9 @@ apps enhanced CPU power,
 With ability to write pids directly to resource classes, it's just a
 matter of :
 
-       # echo pid > /mnt/network/<new_class>/tasks
+       # echo pid > /sys/fs/cgroup/network/<new_class>/tasks
        (after some time)
-       # echo pid > /mnt/network/<orig_class>/tasks
+       # echo pid > /sys/fs/cgroup/network/<orig_class>/tasks
 
 Without this ability, he would have to split the cgroup into
 multiple separate ones and then associate the new cgroups with the
@@ -310,21 +310,24 @@ subsystem, this is the case for the cpuset.
 To start a new job that is to be contained within a cgroup, using
 the "cpuset" cgroup subsystem, the steps are something like:
 
- 1) mkdir /dev/cgroup
+ 1) mount -t tmpfs cgroup_root /sys/fs/cgroup
- 2) mount -t cgroup -ocpuset cpuset /dev/cgroup
+ 2) mkdir /sys/fs/cgroup/cpuset
- 3) Create the new cgroup by doing mkdir's and write's (or echo's) in
+ 3) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
-    the /dev/cgroup virtual file system.
+ 4) Create the new cgroup by doing mkdir's and write's (or echo's) in
- 4) Start a task that will be the "founding father" of the new job.
+    the /sys/fs/cgroup virtual file system.
- 5) Attach that task to the new cgroup by writing its pid to the
+ 5) Start a task that will be the "founding father" of the new job.
-    /dev/cgroup tasks file for that cgroup.
+ 6) Attach that task to the new cgroup by writing its pid to the
- 6) fork, exec or clone the job tasks from this founding father task.
+    /sys/fs/cgroup/cpuset/tasks file for that cgroup.
+ 7) fork, exec or clone the job tasks from this founding father task.
 
 For example, the following sequence of commands will setup a cgroup
 named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
 and then start a subshell 'sh' in that cgroup:
 
-  mount -t cgroup cpuset -ocpuset /dev/cgroup
+  mount -t tmpfs cgroup_root /sys/fs/cgroup
-  cd /dev/cgroup
+  mkdir /sys/fs/cgroup/cpuset
+  mount -t cgroup cpuset -ocpuset /sys/fs/cgroup/cpuset
+  cd /sys/fs/cgroup/cpuset
   mkdir Charlie
   cd Charlie
   /bin/echo 2-3 > cpuset.cpus
@@ -345,7 +348,7 @@ Creating, modifying, using the cgroups can be done through the cgroup
 virtual filesystem.
 
 To mount a cgroup hierarchy with all available subsystems, type:
-# mount -t cgroup xxx /dev/cgroup
+# mount -t cgroup xxx /sys/fs/cgroup
 
 The "xxx" is not interpreted by the cgroup code, but will appear in
 /proc/mounts so may be any useful identifying string that you like.
@@ -354,23 +357,32 @@ Note: Some subsystems do not work without some user input first.  For instance,
 if cpusets are enabled the user will have to populate the cpus and mems files
 for each new cgroup created before that group can be used.
 
+As explained in section `1.2 Why are cgroups needed?' you should create
+different hierarchies of cgroups for each single resource or group of
+resources you want to control. Therefore, you should mount a tmpfs on
+/sys/fs/cgroup and create directories for each cgroup resource or resource
+group.
+
+# mount -t tmpfs cgroup_root /sys/fs/cgroup
+# mkdir /sys/fs/cgroup/rg1
+
 To mount a cgroup hierarchy with just the cpuset and memory
 subsystems, type:
-# mount -t cgroup -o cpuset,memory hier1 /dev/cgroup
+# mount -t cgroup -o cpuset,memory hier1 /sys/fs/cgroup/rg1
 
 To change the set of subsystems bound to a mounted hierarchy, just
 remount with different options:
-# mount -o remount,cpuset,blkio hier1 /dev/cgroup
+# mount -o remount,cpuset,blkio hier1 /sys/fs/cgroup/rg1
 
 Now memory is removed from the hierarchy and blkio is added.
 
 Note this will add blkio to the hierarchy but won't remove memory or
 cpuset, because the new options are appended to the old ones:
-# mount -o remount,blkio /dev/cgroup
+# mount -o remount,blkio /sys/fs/cgroup/rg1
 
 To Specify a hierarchy's release_agent:
 # mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \
-  xxx /dev/cgroup
+  xxx /sys/fs/cgroup/rg1
 
 Note that specifying 'release_agent' more than once will return failure.
 
@@ -379,17 +391,17 @@ when the hierarchy consists of a single (root) cgroup. Supporting
 the ability to arbitrarily bind/unbind subsystems from an existing
 cgroup hierarchy is intended to be implemented in the future.
 
-Then under /dev/cgroup you can find a tree that corresponds to the
+Then under /sys/fs/cgroup/rg1 you can find a tree that corresponds to the
-tree of the cgroups in the system. For instance, /dev/cgroup
+tree of the cgroups in the system. For instance, /sys/fs/cgroup/rg1
 is the cgroup that holds the whole system.
 
 If you want to change the value of release_agent:
-# echo "/sbin/new_release_agent" > /dev/cgroup/release_agent
+# echo "/sbin/new_release_agent" > /sys/fs/cgroup/rg1/release_agent
 
 It can also be changed via remount.
 
-If you want to create a new cgroup under /dev/cgroup:
+If you want to create a new cgroup under /sys/fs/cgroup/rg1:
-# cd /dev/cgroup
+# cd /sys/fs/cgroup/rg1
 # mkdir my_cgroup
 
 Now you want to do something with this cgroup.

Documentation/cgroups/cpuacct.txt

@@ -10,26 +10,25 @@ directly present in its group.
 
 Accounting groups can be created by first mounting the cgroup filesystem.
 
-# mkdir /cgroups
+# mount -t cgroup -ocpuacct none /sys/fs/cgroup
-# mount -t cgroup -ocpuacct none /cgroups
 
-With the above step, the initial or the parent accounting group
+With the above step, the initial or the parent accounting group becomes
-becomes visible at /cgroups. At bootup, this group includes all the
+visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in
-tasks in the system. /cgroups/tasks lists the tasks in this cgroup.
+the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup.
-/cgroups/cpuacct.usage gives the CPU time (in nanoseconds) obtained by
+/sys/fs/cgroup/cpuacct.usage gives the CPU time (in nanoseconds) obtained
-this group which is essentially the CPU time obtained by all the tasks
+by this group which is essentially the CPU time obtained by all the tasks
 in the system.
 
-New accounting groups can be created under the parent group /cgroups.
+New accounting groups can be created under the parent group /sys/fs/cgroup.
 
-# cd /cgroups
+# cd /sys/fs/cgroup
 # mkdir g1
 # echo $$ > g1
 
 The above steps create a new group g1 and move the current shell
 process (bash) into it. CPU time consumed by this bash and its children
 can be obtained from g1/cpuacct.usage and the same is accumulated in
-/cgroups/cpuacct.usage also.
+/sys/fs/cgroup/cpuacct.usage also.
 
 cpuacct.stat file lists a few statistics which further divide the
 CPU time obtained by the cgroup into user and system times. Currently

Documentation/cgroups/cpusets.txt

@@ -661,21 +661,21 @@ than stress the kernel.
 
 To start a new job that is to be contained within a cpuset, the steps are:
 
- 1) mkdir /dev/cpuset
+ 1) mkdir /sys/fs/cgroup/cpuset
- 2) mount -t cgroup -ocpuset cpuset /dev/cpuset
+ 2) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
  3) Create the new cpuset by doing mkdir's and write's (or echo's) in
-    the /dev/cpuset virtual file system.
+    the /sys/fs/cgroup/cpuset virtual file system.
  4) Start a task that will be the "founding father" of the new job.
  5) Attach that task to the new cpuset by writing its pid to the
-    /dev/cpuset tasks file for that cpuset.
+    /sys/fs/cgroup/cpuset tasks file for that cpuset.
  6) fork, exec or clone the job tasks from this founding father task.
 
 For example, the following sequence of commands will setup a cpuset
 named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
 and then start a subshell 'sh' in that cpuset:
 
-  mount -t cgroup -ocpuset cpuset /dev/cpuset
+  mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
-  cd /dev/cpuset
+  cd /sys/fs/cgroup/cpuset
   mkdir Charlie
   cd Charlie
   /bin/echo 2-3 > cpuset.cpus
@@ -710,14 +710,14 @@ Creating, modifying, using the cpusets can be done through the cpuset
 virtual filesystem.
 
 To mount it, type:
-# mount -t cgroup -o cpuset cpuset /dev/cpuset
+# mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset
 
-Then under /dev/cpuset you can find a tree that corresponds to the
+Then under /sys/fs/cgroup/cpuset you can find a tree that corresponds to the
-tree of the cpusets in the system. For instance, /dev/cpuset
+tree of the cpusets in the system. For instance, /sys/fs/cgroup/cpuset
 is the cpuset that holds the whole system.
 
-If you want to create a new cpuset under /dev/cpuset:
+If you want to create a new cpuset under /sys/fs/cgroup/cpuset:
-# cd /dev/cpuset
+# cd /sys/fs/cgroup/cpuset
 # mkdir my_cpuset
 
 Now you want to do something with this cpuset.
@@ -765,12 +765,12 @@ wrapper around the cgroup filesystem.
 
 The command
 
-mount -t cpuset X /dev/cpuset
+mount -t cpuset X /sys/fs/cgroup/cpuset
 
 is equivalent to
 
-mount -t cgroup -ocpuset,noprefix X /dev/cpuset
+mount -t cgroup -ocpuset,noprefix X /sys/fs/cgroup/cpuset
-echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
+echo "/sbin/cpuset_release_agent" > /sys/fs/cgroup/cpuset/release_agent
 
 2.2 Adding/removing cpus
 ------------------------

Documentation/cgroups/devices.txt

@@ -22,16 +22,16 @@ removed from the child(ren).
 An entry is added using devices.allow, and removed using
 devices.deny.  For instance
 
-	echo 'c 1:3 mr' > /cgroups/1/devices.allow
+	echo 'c 1:3 mr' > /sys/fs/cgroup/1/devices.allow
 
 allows cgroup 1 to read and mknod the device usually known as
 /dev/null.  Doing
 
-	echo a > /cgroups/1/devices.deny
+	echo a > /sys/fs/cgroup/1/devices.deny
 
 will remove the default 'a *:* rwm' entry. Doing
 
-	echo a > /cgroups/1/devices.allow
+	echo a > /sys/fs/cgroup/1/devices.allow
 
 will add the 'a *:* rwm' entry to the whitelist.
 

Documentation/cgroups/freezer-subsystem.txt

@@ -59,28 +59,28 @@ is non-freezable.
 
 * Examples of usage :
 
-   # mkdir /containers
+   # mkdir /sys/fs/cgroup/freezer
-   # mount -t cgroup -ofreezer freezer  /containers
+   # mount -t cgroup -ofreezer freezer /sys/fs/cgroup/freezer
-   # mkdir /containers/0
+   # mkdir /sys/fs/cgroup/freezer/0
-   # echo $some_pid > /containers/0/tasks
+   # echo $some_pid > /sys/fs/cgroup/freezer/0/tasks
 
 to get status of the freezer subsystem :
 
-   # cat /containers/0/freezer.state
+   # cat /sys/fs/cgroup/freezer/0/freezer.state
    THAWED
 
 to freeze all tasks in the container :
 
-   # echo FROZEN > /containers/0/freezer.state
+   # echo FROZEN > /sys/fs/cgroup/freezer/0/freezer.state
-   # cat /containers/0/freezer.state
+   # cat /sys/fs/cgroup/freezer/0/freezer.state
    FREEZING
-   # cat /containers/0/freezer.state
+   # cat /sys/fs/cgroup/freezer/0/freezer.state
    FROZEN
 
 to unfreeze all tasks in the container :
 
-   # echo THAWED > /containers/0/freezer.state
+   # echo THAWED > /sys/fs/cgroup/freezer/0/freezer.state
-   # cat /containers/0/freezer.state
+   # cat /sys/fs/cgroup/freezer/0/freezer.state
    THAWED
 
 This is the basic mechanism which should do the right thing for user space task

Documentation/cgroups/memory.txt

@@ -1,8 +1,8 @@
 Memory Resource Controller
 
-NOTE: The Memory Resource Controller has been generically been referred
+NOTE: The Memory Resource Controller has generically been referred to as the
-      to as the memory controller in this document. Do not confuse memory
+      memory controller in this document. Do not confuse memory controller
-      controller used here with the memory controller that is used in hardware.
+      used here with the memory controller that is used in hardware.
 
 (For editors)
 In this document:
@@ -70,6 +70,7 @@ Brief summary of control files.
 				 (See sysctl's vm.swappiness)
  memory.move_charge_at_immigrate # set/show controls of moving charges
  memory.oom_control		 # set/show oom controls.
+ memory.numa_stat		 # show the number of memory usage per numa node
 
 1. History
 
@@ -181,7 +182,7 @@ behind this approach is that a cgroup that aggressively uses a shared
 page will eventually get charged for it (once it is uncharged from
 the cgroup that brought it in -- this will happen on memory pressure).
 
-Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used..
+Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used.
 When you do swapoff and make swapped-out pages of shmem(tmpfs) to
 be backed into memory in force, charges for pages are accounted against the
 caller of swapoff rather than the users of shmem.
@@ -213,7 +214,7 @@ affecting global LRU, memory+swap limit is better than just limiting swap from
 OS point of view.
 
 * What happens when a cgroup hits memory.memsw.limit_in_bytes
-When a cgroup his memory.memsw.limit_in_bytes, it's useless to do swap-out
+When a cgroup hits memory.memsw.limit_in_bytes, it's useless to do swap-out
 in this cgroup. Then, swap-out will not be done by cgroup routine and file
 caches are dropped. But as mentioned above, global LRU can do swapout memory
 from it for sanity of the system's memory management state. You can't forbid
@@ -263,16 +264,17 @@ b. Enable CONFIG_RESOURCE_COUNTERS
 c. Enable CONFIG_CGROUP_MEM_RES_CTLR
 d. Enable CONFIG_CGROUP_MEM_RES_CTLR_SWAP (to use swap extension)
 
-1. Prepare the cgroups
+1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?)
-# mkdir -p /cgroups
+# mount -t tmpfs none /sys/fs/cgroup
-# mount -t cgroup none /cgroups -o memory
+# mkdir /sys/fs/cgroup/memory
+# mount -t cgroup none /sys/fs/cgroup/memory -o memory
 
 2. Make the new group and move bash into it
-# mkdir /cgroups/0
+# mkdir /sys/fs/cgroup/memory/0
-# echo $$ > /cgroups/0/tasks
+# echo $$ > /sys/fs/cgroup/memory/0/tasks
 
 Since now we're in the 0 cgroup, we can alter the memory limit:
-# echo 4M > /cgroups/0/memory.limit_in_bytes
+# echo 4M > /sys/fs/cgroup/memory/0/memory.limit_in_bytes
 
 NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
 mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.)
@@ -280,11 +282,11 @@ mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.)
 NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited).
 NOTE: We cannot set limits on the root cgroup any more.
 
-# cat /cgroups/0/memory.limit_in_bytes
+# cat /sys/fs/cgroup/memory/0/memory.limit_in_bytes
 4194304
 
 We can check the usage:
-# cat /cgroups/0/memory.usage_in_bytes
+# cat /sys/fs/cgroup/memory/0/memory.usage_in_bytes
 1216512
 
 A successful write to this file does not guarantee a successful set of
@@ -464,6 +466,24 @@ value for efficient access. (Of course, when necessary, it's synchronized.)
 If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP)
 value in memory.stat(see 5.2).
 
+5.6 numa_stat
+
+This is similar to numa_maps but operates on a per-memcg basis.  This is
+useful for providing visibility into the numa locality information within
+an memcg since the pages are allowed to be allocated from any physical
+node.  One of the usecases is evaluating application performance by
+combining this information with the application's cpu allocation.
+
+We export "total", "file", "anon" and "unevictable" pages per-node for
+each memcg.  The ouput format of memory.numa_stat is:
+
+total=<total pages> N0=<node 0 pages> N1=<node 1 pages> ...
+file=<total file pages> N0=<node 0 pages> N1=<node 1 pages> ...
+anon=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+unevictable=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+
+And we have total = file + anon + unevictable.
+
 6. Hierarchy support
 
 The memory controller supports a deep hierarchy and hierarchical accounting.
@@ -471,13 +491,13 @@ The hierarchy is created by creating the appropriate cgroups in the
 cgroup filesystem. Consider for example, the following cgroup filesystem
 hierarchy
 
-		root
+	       root
 	     /  |   \
-           /	|    \
+            /	|    \
-	  a	b	c
+	   a	b     c
-			| \
+		      | \
-			|  \
+		      |  \
-			d   e
+		      d   e
 
 In the diagram above, with hierarchical accounting enabled, all memory
 usage of e, is accounted to its ancestors up until the root (i.e, c and root),

Documentation/feature-removal-schedule.txt

@@ -481,23 +481,6 @@ Who:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 
 ----------------------------
 
-What:   namespace cgroup (ns_cgroup)
-When:   2.6.38
-Why:    The ns_cgroup leads to some problems:
-	* cgroup creation is out-of-control
-	* cgroup name can conflict when pids are looping
-	* it is not possible to have a single process handling
-	a lot of namespaces without falling in a exponential creation time
-	* we may want to create a namespace without creating a cgroup
-
-	The ns_cgroup is replaced by a compatibility flag 'clone_children',
-	where a newly created cgroup will copy the parent cgroup values.
-	The userspace has to manually create a cgroup and add a task to
-	the 'tasks' file.
-Who:    Daniel Lezcano <daniel.lezcano@free.fr>
-
-----------------------------
-
 What:	iwlwifi disable_hw_scan module parameters
 When:	2.6.40
 Why:	Hareware scan is the prefer method for iwlwifi devices for

Documentation/filesystems/proc.txt

@@ -843,6 +843,7 @@ Provides counts of softirq handlers serviced since boot time, for each cpu.
  TASKLET:          0          0          0        290
    SCHED:      27035      26983      26971      26746
  HRTIMER:          0          0          0          0
+     RCU:       1678       1769       2178       2250
 
 
 1.3 IDE devices in /proc/ide

Documentation/kernel-parameters.txt

@@ -2598,6 +2598,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 					unlock ejectable media);
 				m = MAX_SECTORS_64 (don't transfer more
 					than 64 sectors = 32 KB at a time);
+				n = INITIAL_READ10 (force a retry of the
+					initial READ(10) command);
 				o = CAPACITY_OK (accept the capacity
 					reported by the device);
 				r = IGNORE_RESIDUE (the device reports

Documentation/kmemleak.txt

@@ -11,7 +11,9 @@ with the difference that the orphan objects are not freed but only
 reported via /sys/kernel/debug/kmemleak. A similar method is used by the
 Valgrind tool (memcheck --leak-check) to detect the memory leaks in
 user-space applications.
-Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze and tile.
+
+Please check DEBUG_KMEMLEAK dependencies in lib/Kconfig.debug for supported
+architectures.
 
 Usage
 -----

Documentation/md.txt

@@ -555,7 +555,7 @@ also have
    sync_min
    sync_max
      The two values, given as numbers of sectors, indicate a range
-     withing the array where 'check'/'repair' will operate. Must be
+     within the array where 'check'/'repair' will operate. Must be
      a multiple of chunk_size. When it reaches "sync_max" it will
      pause, rather than complete.
      You can use 'select' or 'poll' on "sync_completed" to wait for

Documentation/printk-formats.txt

@@ -9,7 +9,121 @@ If variable is of Type,		use printk format specifier:
 		size_t			%zu or %zx
 		ssize_t			%zd or %zx
 
-Raw pointer value SHOULD be printed with %p.
+Raw pointer value SHOULD be printed with %p. The kernel supports
+the following extended format specifiers for pointer types:
+
+Symbols/Function Pointers:
+
+	%pF	versatile_init+0x0/0x110
+	%pf	versatile_init
+	%pS	versatile_init+0x0/0x110
+	%ps	versatile_init
+	%pB	prev_fn_of_versatile_init+0x88/0x88
+
+	For printing symbols and function pointers. The 'S' and 's' specifiers
+	result in the symbol name with ('S') or without ('s') offsets. Where
+	this is used on a kernel without KALLSYMS - the symbol address is
+	printed instead.
+
+	The 'B' specifier results in the symbol name with offsets and should be
+	used when printing stack backtraces. The specifier takes into
+	consideration the effect of compiler optimisations which may occur
+	when tail-call's are used and marked with the noreturn GCC attribute.
+
+	On ia64, ppc64 and parisc64 architectures function pointers are
+	actually function descriptors which must first be resolved. The 'F' and
+	'f' specifiers perform this resolution and then provide the same
+	functionality as the 'S' and 's' specifiers.
+
+Kernel Pointers:
+
+	%pK	0x01234567 or 0x0123456789abcdef
+
+	For printing kernel pointers which should be hidden from unprivileged
+	users. The behaviour of %pK depends on the kptr_restrict sysctl - see
+	Documentation/sysctl/kernel.txt for more details.
+
+Struct Resources:
+
+	%pr	[mem 0x60000000-0x6fffffff flags 0x2200] or
+		[mem 0x0000000060000000-0x000000006fffffff flags 0x2200]
+	%pR	[mem 0x60000000-0x6fffffff pref] or
+		[mem 0x0000000060000000-0x000000006fffffff pref]
+
+	For printing struct resources. The 'R' and 'r' specifiers result in a
+	printed resource with ('R') or without ('r') a decoded flags member.
+
+MAC/FDDI addresses:
+
+	%pM	00:01:02:03:04:05
+	%pMF	00-01-02-03-04-05
+	%pm	000102030405
+
+	For printing 6-byte MAC/FDDI addresses in hex notation. The 'M' and 'm'
+	specifiers result in a printed address with ('M') or without ('m') byte
+	separators. The default byte separator is the colon (':').
+
+	Where FDDI addresses are concerned the 'F' specifier can be used after
+	the 'M' specifier to use dash ('-') separators instead of the default
+	separator.
+
+IPv4 addresses:
+
+	%pI4	1.2.3.4
+	%pi4	001.002.003.004
+	%p[Ii][hnbl]
+
+	For printing IPv4 dot-separated decimal addresses. The 'I4' and 'i4'
+	specifiers result in a printed address with ('i4') or without ('I4')
+	leading zeros.
+
+	The additional 'h', 'n', 'b', and 'l' specifiers are used to specify
+	host, network, big or little endian order addresses respectively. Where
+	no specifier is provided the default network/big endian order is used.
+
+IPv6 addresses:
+
+	%pI6	0001:0002:0003:0004:0005:0006:0007:0008
+	%pi6	00010002000300040005000600070008
+	%pI6c	1:2:3:4:5:6:7:8
+
+	For printing IPv6 network-order 16-bit hex addresses. The 'I6' and 'i6'
+	specifiers result in a printed address with ('I6') or without ('i6')
+	colon-separators. Leading zeros are always used.
+
+	The additional 'c' specifier can be used with the 'I' specifier to
+	print a compressed IPv6 address as described by
+	http://tools.ietf.org/html/rfc5952
+
+UUID/GUID addresses:
+
+	%pUb	00010203-0405-0607-0809-0a0b0c0d0e0f
+	%pUB	00010203-0405-0607-0809-0A0B0C0D0E0F
+	%pUl	03020100-0504-0706-0809-0a0b0c0e0e0f
+	%pUL	03020100-0504-0706-0809-0A0B0C0E0E0F
+
+	For printing 16-byte UUID/GUIDs addresses. The additional 'l', 'L',
+	'b' and 'B' specifiers are used to specify a little endian order in
+	lower ('l') or upper case ('L') hex characters - and big endian order
+	in lower ('b') or upper case ('B') hex characters.
+
+	Where no additional specifiers are used the default little endian
+	order with lower case hex characters will be printed.
+
+struct va_format:
+
+	%pV
+
+	For printing struct va_format structures. These contain a format string
+	and va_list as follows:
+
+	struct va_format {
+		const char *fmt;
+		va_list *va;
+	};
+
+	Do not use this feature without some mechanism to verify the
+	correctness of the format string and va_list arguments.
 
 u64 SHOULD be printed with %llu/%llx, (unsigned long long):
 
@@ -32,4 +146,5 @@ Reminder: sizeof() result is of type size_t.
 Thank you for your cooperation and attention.
 
 
-By Randy Dunlap <rdunlap@xenotime.net>
+By Randy Dunlap <rdunlap@xenotime.net> and
+Andrew Murray <amurray@mpc-data.co.uk>

Documentation/scheduler/sched-design-CFS.txt

@@ -223,9 +223,10 @@ When CONFIG_FAIR_GROUP_SCHED is defined, a "cpu.shares" file is created for each
 group created using the pseudo filesystem.  See example steps below to create
 task groups and modify their CPU share using the "cgroups" pseudo filesystem.
 
-	# mkdir /dev/cpuctl
+	# mount -t tmpfs cgroup_root /sys/fs/cgroup
-	# mount -t cgroup -ocpu none /dev/cpuctl
+	# mkdir /sys/fs/cgroup/cpu
-	# cd /dev/cpuctl
+	# mount -t cgroup -ocpu none /sys/fs/cgroup/cpu
+	# cd /sys/fs/cgroup/cpu
 
 	# mkdir multimedia	# create "multimedia" group of tasks
 	# mkdir browser		# create "browser" group of tasks

Documentation/scheduler/sched-rt-group.txt

@@ -129,9 +129,8 @@ priority!
 Enabling CONFIG_RT_GROUP_SCHED lets you explicitly allocate real
 CPU bandwidth to task groups.
 
-This uses the /cgroup virtual file system and
+This uses the cgroup virtual file system and "<cgroup>/cpu.rt_runtime_us"
-"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
+to control the CPU time reserved for each control group.
-control group.
 
 For more information on working with control groups, you should read
 Documentation/cgroups/cgroups.txt as well.
@@ -150,7 +149,7 @@ For now, this can be simplified to just the following (but see Future plans):
 ===============
 
 There is work in progress to make the scheduling period for each group
-("/cgroup/<cgroup>/cpu.rt_period_us") configurable as well.
+("<cgroup>/cpu.rt_period_us") configurable as well.
 
 The constraint on the period is that a subgroup must have a smaller or
 equal period to its parent. But realistically its not very useful _yet_

Documentation/vm/hwpoison.txt

@@ -129,12 +129,12 @@ Limit injection to pages owned by memgroup. Specified by inode number
 of the memcg.
 
 Example:
-        mkdir /cgroup/hwpoison
+        mkdir /sys/fs/cgroup/mem/hwpoison
 
         usemem -m 100 -s 1000 &
-        echo `jobs -p` > /cgroup/hwpoison/tasks
+        echo `jobs -p` > /sys/fs/cgroup/mem/hwpoison/tasks
 
-        memcg_ino=$(ls -id /cgroup/hwpoison | cut -f1 -d' ')
+        memcg_ino=$(ls -id /sys/fs/cgroup/mem/hwpoison | cut -f1 -d' ')
         echo $memcg_ino > /debug/hwpoison/corrupt-filter-memcg
 
         page-types -p `pidof init`   --hwpoison  # shall do nothing

MAINTAINERS

@@ -1739,7 +1739,7 @@ S:	Supported
 F:	drivers/net/enic/
 
 CIRRUS LOGIC EP93XX ETHERNET DRIVER
-M:	Lennert Buytenhek <kernel@wantstofly.org>
+M:	Hartley Sweeten <hsweeten@visionengravers.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/arm/ep93xx_eth.c
@@ -1889,7 +1889,6 @@ L:	cpufreq@vger.kernel.org
 W:	http://www.codemonkey.org.uk/projects/cpufreq/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
 S:	Maintained
-F:	arch/x86/kernel/cpu/cpufreq/
 F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
 
@@ -2292,8 +2291,7 @@ F:	drivers/scsi/eata_pio.*
 
 EBTABLES
 M:	Bart De Schuymer <bart.de.schuymer@pandora.be>
-L:	ebtables-user@lists.sourceforge.net
+L:	netfilter-devel@vger.kernel.org
-L:	ebtables-devel@lists.sourceforge.net
 W:	http://ebtables.sourceforge.net/
 S:	Maintained
 F:	include/linux/netfilter_bridge/ebt_*.h
@@ -3820,6 +3818,12 @@ S:	Maintained
 F:	drivers/leds/
 F:	include/linux/leds.h
 
+LEGACY EEPROM DRIVER
+M:	Jean Delvare <khali@linux-fr.org>
+S:	Maintained
+F:	Documentation/misc-devices/eeprom
+F:	drivers/misc/eeprom/eeprom.c
+
 LEGO USB Tower driver
 M:	Juergen Stuber <starblue@users.sourceforge.net>
 L:	legousb-devel@lists.sourceforge.net
@@ -4145,7 +4149,7 @@ F:	include/linux/mm.h
 F:	mm/
 
 MEMORY RESOURCE CONTROLLER
-M:	Balbir Singh <balbir@linux.vnet.ibm.com>
+M:	Balbir Singh <bsingharora@gmail.com>
 M:	Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
 M:	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
 L:	linux-mm@kvack.org
@@ -4252,8 +4256,7 @@ F:	drivers/mmc/
 F:	include/linux/mmc/
 
 MULTIMEDIA CARD (MMC) ETC. OVER SPI
-M:	David Brownell <dbrownell@users.sourceforge.net>
+S:	Orphan
-S:	Odd Fixes
 F:	drivers/mmc/host/mmc_spi.c
 F:	include/linux/spi/mmc_spi.h
 
@@ -4603,7 +4606,6 @@ F:	drivers/media/video/omap3isp/*
 
 OMAP USB SUPPORT
 M:	Felipe Balbi <balbi@ti.com>
-M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
@@ -4892,7 +4894,7 @@ F:	mm/percpu*.c
 F:	arch/*/include/asm/percpu.h
 
 PER-TASK DELAY ACCOUNTING
-M:	Balbir Singh <balbir@linux.vnet.ibm.com>
+M:	Balbir Singh <bsingharora@gmail.com>
 S:	Maintained
 F:	include/linux/delayacct.h
 F:	kernel/delayacct.c
@@ -4947,6 +4949,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32.gi
 F:	drivers/input/serio/i8042-unicore32io.h
 F:	drivers/i2c/busses/i2c-puv3.c
 F:	drivers/video/fb-puv3.c
+F:	drivers/rtc/rtc-puv3.c
 
 PMC SIERRA MaxRAID DRIVER
 M:	Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
@@ -5984,7 +5987,6 @@ F:	Documentation/serial/specialix.txt
 F:	drivers/staging/tty/specialix*
 
 SPI SUBSYSTEM
-M:	David Brownell <dbrownell@users.sourceforge.net>
 M:	Grant Likely <grant.likely@secretlab.ca>
 L:	spi-devel-general@lists.sourceforge.net
 Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
@@ -6100,7 +6102,7 @@ F:	include/target/
 F:	Documentation/target/
 
 TASKSTATS STATISTICS INTERFACE
-M:	Balbir Singh <balbir@linux.vnet.ibm.com>
+M:	Balbir Singh <bsingharora@gmail.com>
 S:	Maintained
 F:	Documentation/accounting/taskstats*
 F:	include/linux/taskstats*
@@ -6432,9 +6434,8 @@ S:	Maintained
 F:	drivers/usb/misc/rio500*
 
 USB EHCI DRIVER
-M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
-S:	Odd Fixes
+S:	Orphan
 F:	Documentation/usb/ehci.txt
 F:	drivers/usb/host/ehci*
 
@@ -6448,9 +6449,10 @@ S:	Maintained
 F:	drivers/media/video/et61x251/
 
 USB GADGET/PERIPHERAL SUBSYSTEM
-M:	David Brownell <dbrownell@users.sourceforge.net>
+M:	Felipe Balbi <balbi@ti.com>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org/gadget
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
 F:	drivers/usb/gadget/
 F:	include/linux/usb/gadget*
@@ -6460,7 +6462,7 @@ M:	Jiri Kosina <jkosina@suse.cz>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
-F:	Documentation/usb/hiddev.txt
+F:	Documentation/hid/hiddev.txt
 F:	drivers/hid/usbhid/
 
 USB ISP116X DRIVER
@@ -6492,9 +6494,8 @@ S:	Maintained
 F:	sound/usb/midi.*
 
 USB OHCI DRIVER
-M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
-S:	Odd Fixes
+S:	Orphan
 F:	Documentation/usb/ohci.txt
 F:	drivers/usb/host/ohci*
 
@@ -6720,6 +6721,14 @@ S:	Maintained
 F:	Documentation/filesystems/vfat.txt
 F:	fs/fat/
 
+VIDEOBUF2 FRAMEWORK
+M:	Pawel Osciak <pawel@osciak.com>
+M:	Marek Szyprowski <m.szyprowski@samsung.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	drivers/media/video/videobuf2-*
+F:	include/media/videobuf2-*
+
 VIRTIO CONSOLE DRIVER
 M:	Amit Shah <amit.shah@redhat.com>
 L:	virtualization@lists.linux-foundation.org
@@ -6997,6 +7006,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.
 S:	Maintained
 F:	drivers/platform/x86
 
+X86 MCE INFRASTRUCTURE
+M:	Tony Luck <tony.luck@intel.com>
+M:	Borislav Petkov <bp@amd64.org>
+L:	linux-edac@vger.kernel.org
+S:	Maintained
+F:	arch/x86/kernel/cpu/mcheck/*
+
 XEN HYPERVISOR INTERFACE
 M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc4
 NAME = Sneaky Weasel
 
 # *DOCUMENTATION*
@@ -378,7 +378,7 @@ KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
 KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
-KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 
 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
@@ -1005,7 +1005,7 @@ endef
 
 define filechk_version.h
 	(echo \#define LINUX_VERSION_CODE $(shell                             \
-	expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL));     \
+	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL));    \
 	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
 endef
 
@@ -1110,11 +1110,6 @@ modules_install: _modinst_ _modinst_post
 
 PHONY += _modinst_
 _modinst_:
-	@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
-		echo "Warning: you may need to install module-init-tools"; \
-		echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
-		sleep 1; \
-	fi
 	@rm -rf $(MODLIB)/kernel
 	@rm -f $(MODLIB)/source
 	@mkdir -p $(MODLIB)/kernel
@@ -1531,12 +1526,8 @@ quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files))
 
 # Run depmod only if we have System.map and depmod is executable
 quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
-      cmd_depmod = \
+      cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
-	if [ -r System.map -a -x $(DEPMOD) ]; then                              \
+                   $(KERNELRELEASE)
-		$(DEPMOD) -ae -F System.map                                     \
-		$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) )     \
-		$(KERNELRELEASE);                                               \
-	fi
 
 # Create temporary dir for module support files
 # clean it up only when building all modules

arch/alpha/kernel/osf_sys.c

@@ -409,7 +409,7 @@ SYSCALL_DEFINE2(osf_getdomainname, char __user *, name, int, namelen)
 		return -EFAULT;
 
 	len = namelen;
-	if (namelen > 32)
+	if (len > 32)
 		len = 32;
 
 	down_read(&uts_sem);
@@ -594,7 +594,7 @@ SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
 	down_read(&uts_sem);
 	res = sysinfo_table[offset];
 	len = strlen(res)+1;
-	if (len > count)
+	if ((unsigned long)len > (unsigned long)count)
 		len = count;
 	if (copy_to_user(buf, res, len))
 		err = -EFAULT;
@@ -649,7 +649,7 @@ SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer,
 		return 1;
 
 	case GSI_GET_HWRPB:
-		if (nbytes < sizeof(*hwrpb))
+		if (nbytes > sizeof(*hwrpb))
 			return -EINVAL;
 		if (copy_to_user(buffer, hwrpb, nbytes) != 0)
 			return -EFAULT;
@@ -1008,6 +1008,7 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options,
 {
 	struct rusage r;
 	long ret, err;
+	unsigned int status = 0;
 	mm_segment_t old_fs;
 
 	if (!ur)
@@ -1016,13 +1017,15 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options,
 	old_fs = get_fs();
 		
 	set_fs (KERNEL_DS);
-	ret = sys_wait4(pid, ustatus, options, (struct rusage __user *) &r);
+	ret = sys_wait4(pid, (unsigned int __user *) &status, options,
+			(struct rusage __user *) &r);
 	set_fs (old_fs);
 
 	if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur)))
 		return -EFAULT;
 
 	err = 0;
+	err |= put_user(status, ustatus);
 	err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec);
 	err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec);
 	err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec);

arch/arm/boot/compressed/head.S

@@ -691,9 +691,9 @@ proc_types:
 
 		.word	0x41069260		@ ARM926EJ-S (v5TEJ)
 		.word	0xff0ffff0
-		b	__arm926ejs_mmu_cache_on
+		W(b)	__arm926ejs_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_off
-		b	__armv5tej_mmu_cache_flush
+		W(b)	__armv5tej_mmu_cache_flush
 
 		.word	0x00007000		@ ARM7 IDs
 		.word	0x0000f000

arch/arm/configs/davinci_all_defconfig

@@ -157,7 +157,7 @@ CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_XFS_FS=m

arch/arm/configs/netx_defconfig

@@ -60,7 +60,7 @@ CONFIG_FB_ARMCLCD=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_INOTIFY=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y

arch/arm/configs/viper_defconfig

@@ -142,7 +142,7 @@ CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_G_PRINTER=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=m
 CONFIG_RTC_DRV_SA1100=m
 CONFIG_EXT2_FS=m

arch/arm/configs/xcep_defconfig

@@ -73,7 +73,7 @@ CONFIG_SENSORS_MAX6650=m
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_SA1100=m
 CONFIG_DMADEVICES=y
 # CONFIG_DNOTIFY is not set

arch/arm/configs/zeus_defconfig

@@ -158,7 +158,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_ISL1208=m
 CONFIG_RTC_DRV_PXA=m
 CONFIG_EXT2_FS=y

arch/arm/kernel/devtree.c

@@ -76,6 +76,9 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 	unsigned long dt_root;
 	const char *model;
 
+	if (!dt_phys)
+		return NULL;
+
 	devtree = phys_to_virt(dt_phys);
 
 	/* check device tree validity */

arch/arm/kernel/entry-armv.S

@@ -435,6 +435,10 @@ __irq_usr:
 	usr_entry
 	kuser_cmpxchg_check
 
+#ifdef CONFIG_IRQSOFF_TRACER
+	bl	trace_hardirqs_off
+#endif
+
 	get_thread_info tsk
 #ifdef CONFIG_PREEMPT
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -453,7 +457,7 @@ __irq_usr:
 #endif
 
 	mov	why, #0
-	b	ret_to_user
+	b	ret_to_user_from_irq
  UNWIND(.fnend		)
 ENDPROC(__irq_usr)
 

arch/arm/kernel/entry-common.S

@@ -64,6 +64,7 @@ work_resched:
 ENTRY(ret_to_user)
 ret_slow_syscall:
 	disable_irq				@ disable interrupts
+ENTRY(ret_to_user_from_irq)
 	ldr	r1, [tsk, #TI_FLAGS]
 	tst	r1, #_TIF_WORK_MASK
 	bne	work_pending
@@ -75,6 +76,7 @@ no_work_pending:
 	arch_ret_to_user r1, lr
 
 	restore_user_regs fast = 0, offset = 0
+ENDPROC(ret_to_user_from_irq)
 ENDPROC(ret_to_user)
 
 /*

arch/arm/kernel/traps.c

@@ -139,7 +139,7 @@ static void dump_instr(const char *lvl, struct pt_regs *regs)
 	fs = get_fs();
 	set_fs(KERNEL_DS);
 
-	for (i = -4; i < 1; i++) {
+	for (i = -4; i < 1 + !!thumb; i++) {
 		unsigned int val, bad;
 
 		if (thumb)
@@ -563,7 +563,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 		if (!pmd_present(*pmd))
 			goto bad_access;
 		pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
-		if (!pte_present(*pte) || !pte_dirty(*pte)) {
+		if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) {
 			pte_unmap_unlock(pte, ptl);
 			goto bad_access;
 		}

arch/arm/mach-davinci/devices-da8xx.c

@@ -494,7 +494,7 @@ static struct platform_device da850_mcasp_device = {
 	.resource	= da850_mcasp_resources,
 };
 
-struct platform_device davinci_pcm_device = {
+static struct platform_device davinci_pcm_device = {
 	.name	= "davinci-pcm-audio",
 	.id	= -1,
 };

arch/arm/mach-davinci/devices.c

@@ -298,7 +298,7 @@ static void davinci_init_wdt(void)
 
 /*-------------------------------------------------------------------------*/
 
-struct platform_device davinci_pcm_device = {
+static struct platform_device davinci_pcm_device = {
 	.name		= "davinci-pcm-audio",
 	.id		= -1,
 };

arch/arm/mach-davinci/gpio.c

@@ -252,9 +252,11 @@ static struct irq_chip gpio_irqchip = {
 static void
 gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
-	struct davinci_gpio_regs __iomem *g = irq2regs(irq);
+	struct davinci_gpio_regs __iomem *g;
 	u32 mask = 0xffff;
 
+	g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc);
+
 	/* we only care about one bank */
 	if (irq & 1)
 		mask <<= 16;
@@ -422,8 +424,7 @@ static int __init davinci_gpio_irq_setup(void)
 
 		/* set up all irqs in this bank */
 		irq_set_chained_handler(bank_irq, gpio_irq_handler);
-		irq_set_chip_data(bank_irq, (__force void *)g);
+		irq_set_handler_data(bank_irq, (__force void *)g);
-		irq_set_handler_data(bank_irq, (void *)irq);
 
 		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
 			irq_set_chip(irq, &gpio_irqchip);

arch/arm/mach-ep93xx/core.c

@@ -402,11 +402,15 @@ static struct resource ep93xx_eth_resource[] = {
 	}
 };
 
+static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
+
 static struct platform_device ep93xx_eth_device = {
 	.name		= "ep93xx-eth",
 	.id		= -1,
 	.dev		= {
-		.platform_data	= &ep93xx_eth_data,
+		.platform_data		= &ep93xx_eth_data,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.dma_mask		= &ep93xx_eth_dma_mask,
 	},
 	.num_resources	= ARRAY_SIZE(ep93xx_eth_resource),
 	.resource	= ep93xx_eth_resource,

arch/arm/mach-exynos4/Kconfig

@@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC
 	help
 	  Common setup code for the camera interfaces.
 
+config EXYNOS4_SETUP_USB_PHY
+	bool
+	help
+	  Common setup code for USB PHY controller
+
 # machine support
 
 menu "EXYNOS4 Machines"
@@ -176,6 +181,7 @@ config MACH_NURI
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	select SAMSUNG_DEV_PWM
 	help
 	  Machine support for Samsung Mobile NURI Board.

arch/arm/mach-exynos4/Makefile

@@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 
-obj-$(CONFIG_USB_SUPPORT)		+= usb-phy.o
+obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)	+= setup-usb-phy.o

arch/arm/mach-exynos4/cpu.c

@@ -98,7 +98,7 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_USB_HSPHY,
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_HSPHY),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,

arch/arm/mach-exynos4/include/mach/regs-usb-phy.h

@@ -11,7 +11,7 @@
 #ifndef __PLAT_S5P_REGS_USB_PHY_H
 #define __PLAT_S5P_REGS_USB_PHY_H
 
-#define EXYNOS4_HSOTG_PHYREG(x)		((x) + S5P_VA_USB_HSPHY)
+#define EXYNOS4_HSOTG_PHYREG(x)		((x) + S3C_VA_USB_HSPHY)
 
 #define EXYNOS4_PHYPWR			EXYNOS4_HSOTG_PHYREG(0x00)
 #define PHY1_HSIC_NORMAL_MASK		(0xf << 9)

arch/arm/mach-exynos4/time.c

@@ -206,6 +206,7 @@ static cycle_t exynos4_pwm4_read(struct clocksource *cs)
 	return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
 }
 
+#ifdef CONFIG_PM
 static void exynos4_pwm4_resume(struct clocksource *cs)
 {
 	unsigned long pclk;
@@ -218,6 +219,7 @@ static void exynos4_pwm4_resume(struct clocksource *cs)
 	exynos4_pwm_init(4, ~0);
 	exynos4_pwm_start(4, 1);
 }
+#endif
 
 struct clocksource pwm_clocksource = {
 	.name		= "pwm_timer4",

arch/arm/mach-footbridge/dc21285-timer.c

@@ -103,6 +103,7 @@ static void __init footbridge_timer_init(void)
 	clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
 	ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
 	ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
+	ce->cpumask = cpumask_of(smp_processor_id());
 
 	clockevents_register_device(ce);
 }

arch/arm/mach-footbridge/include/mach/debug-macro.S

@@ -26,6 +26,7 @@
 #include <asm/hardware/debug-8250.S>
 
 #else
+#include <mach/hardware.h>
 	/* For EBSA285 debugging */
 		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
 		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
@@ -36,8 +37,8 @@
 		.else
 		mov	\rp, #0
 		.endif
-		orr	\rv, \rp, #0x42000000
+		orr	\rv, \rp, #dc21285_high
-		orr	\rp, \rp, #dc21285_high
+		orr	\rp, \rp, #0x42000000
 		.endm
 
 		.macro	senduart,rd,rx

arch/arm/mach-msm/timer.c

@@ -23,6 +23,8 @@
 #include <linux/io.h>
 
 #include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+
 #include <mach/msm_iomap.h>
 #include <mach/cpu.h>
 
@@ -55,10 +57,12 @@ enum timer_location {
 #if defined(CONFIG_ARCH_QSD8X50)
 #define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */
 #define MSM_DGT_SHIFT (0)
-#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) || \
+#elif defined(CONFIG_ARCH_MSM7X30)
-				      defined(CONFIG_ARCH_MSM8960)
 #define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */
 #define MSM_DGT_SHIFT (0)
+#elif defined(CONFIG_ARCH_MSM8X60) || defined(CONFIG_ARCH_MSM8960)
+#define DGT_HZ (27000000 / 4) /* 27 MHz (PXO) / 4 by default */
+#define MSM_DGT_SHIFT (0)
 #else
 #define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */
 #define MSM_DGT_SHIFT (5)
@@ -100,7 +104,11 @@ static cycle_t msm_read_timer_count(struct clocksource *cs)
 {
 	struct msm_clock *clk = container_of(cs, struct msm_clock, clocksource);
 
-	return readl(clk->global_counter);
+	/*
+	 * Shift timer count down by a constant due to unreliable lower bits
+	 * on some targets.
+	 */
+	return readl(clk->global_counter) >> clk->shift;
 }
 
 static struct msm_clock *clockevent_to_clock(struct clock_event_device *evt)

arch/arm/mach-mxs/ocotp.c

@@ -16,6 +16,8 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 
+#include <asm/processor.h>	/* for cpu_relax() */
+
 #include <mach/mxs.h>
 
 #define OCOTP_WORD_OFFSET		0x20

arch/arm/mach-omap1/Makefile

@@ -4,14 +4,14 @@
 
 # Common support
 obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o reset.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
 obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 
 # Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o
+obj-$(CONFIG_PM) += pm.o sleep.o
 
 # DSP
 obj-$(CONFIG_OMAP_MBOX_FWK)	+= mailbox_mach.o

arch/arm/mach-omap1/dma.c

@@ -284,14 +284,15 @@ static int __init omap1_system_dma_init(void)
 	dma_base = ioremap(res[0].start, resource_size(&res[0]));
 	if (!dma_base) {
 		pr_err("%s: Unable to ioremap\n", __func__);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto exit_device_put;
 	}
 
 	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
 	if (ret) {
 		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
 			__func__, pdev->name, pdev->id);
-		goto exit_device_del;
+		goto exit_device_put;
 	}
 
 	p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
@@ -299,7 +300,7 @@ static int __init omap1_system_dma_init(void)
 		dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
 			__func__, pdev->name);
 		ret = -ENOMEM;
-		goto exit_device_put;
+		goto exit_device_del;
 	}
 
 	d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
@@ -380,10 +381,10 @@ static int __init omap1_system_dma_init(void)
 	kfree(d);
 exit_release_p:
 	kfree(p);
-exit_device_put:
-	platform_device_put(pdev);
 exit_device_del:
 	platform_device_del(pdev);
+exit_device_put:
+	platform_device_put(pdev);
 
 	return ret;
 }

arch/arm/mach-omap1/pm_bus.c

@@ -56,9 +56,13 @@ static struct dev_power_domain default_power_domain = {
 		USE_PLATFORM_PM_SLEEP_OPS
 	},
 };
+#define OMAP1_PWR_DOMAIN (&default_power_domain)
+#else
+#define OMAP1_PWR_DOMAIN NULL
+#endif /* CONFIG_PM_RUNTIME */
 
 static struct pm_clk_notifier_block platform_bus_notifier = {
-	.pwr_domain = &default_power_domain,
+	.pwr_domain = OMAP1_PWR_DOMAIN,
 	.con_ids = { "ick", "fck", NULL, },
 };
 
@@ -72,4 +76,4 @@ static int __init omap1_pm_runtime_init(void)
 	return 0;
 }
 core_initcall(omap1_pm_runtime_init);
-#endif /* CONFIG_PM_RUNTIME */
+

arch/arm/mach-omap2/board-2430sdp.c

@@ -26,13 +26,13 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpio.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>

arch/arm/mach-omap2/board-3430sdp.c

@@ -622,19 +622,19 @@ static struct omap_device_pad serial3_pads[] __initdata = {
 			 OMAP_MUX_MODE0),
 };
 
-static struct omap_board_data serial1_data = {
+static struct omap_board_data serial1_data __initdata = {
 	.id		= 0,
 	.pads		= serial1_pads,
 	.pads_cnt	= ARRAY_SIZE(serial1_pads),
 };
 
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
 	.id		= 1,
 	.pads		= serial2_pads,
 	.pads_cnt	= ARRAY_SIZE(serial2_pads),
 };
 
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
 	.id		= 2,
 	.pads		= serial3_pads,
 	.pads_cnt	= ARRAY_SIZE(serial3_pads),

arch/arm/mach-omap2/board-4430sdp.c

@@ -258,7 +258,7 @@ static struct gpio sdp4430_eth_gpios[] __initdata = {
 	{ ETH_KS8851_IRQ,	GPIOF_IN,		"eth_irq"	},
 };
 
-static int omap_ethernet_init(void)
+static int __init omap_ethernet_init(void)
 {
 	int status;
 
@@ -322,6 +322,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.gpio_wp	= -EINVAL,
 		.nonremovable   = true,
 		.ocr_mask	= MMC_VDD_29_30,
+		.no_off_init	= true,
 	},
 	{
 		.mmc		= 1,
@@ -681,19 +682,19 @@ static struct omap_device_pad serial4_pads[] __initdata = {
 			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
 };
 
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
 	.id		= 1,
 	.pads		= serial2_pads,
 	.pads_cnt	= ARRAY_SIZE(serial2_pads),
 };
 
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
 	.id		= 2,
 	.pads		= serial3_pads,
 	.pads_cnt	= ARRAY_SIZE(serial3_pads),
 };
 
-static struct omap_board_data serial4_data = {
+static struct omap_board_data serial4_data __initdata = {
 	.id		= 3,
 	.pads		= serial4_pads,
 	.pads_cnt	= ARRAY_SIZE(serial4_pads),
@@ -729,7 +730,7 @@ static void __init omap_4430sdp_init(void)
 
 	if (omap_rev() == OMAP4430_REV_ES1_0)
 		package = OMAP_PACKAGE_CBL;
-	omap4_mux_init(board_mux, package);
+	omap4_mux_init(board_mux, NULL, package);
 
 	omap_board_config = sdp4430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp4430_config);

arch/arm/mach-omap2/board-apollon.c

@@ -27,13 +27,13 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/smc91x.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-#include <mach/gpio.h>
 #include <plat/led.h>
 #include <plat/usb.h>
 #include <plat/board.h>

arch/arm/mach-omap2/board-cm-t35.c

@@ -63,8 +63,6 @@
 #define SB_T35_SMSC911X_CS	4
 #define SB_T35_SMSC911X_GPIO	65
 
-#define NAND_BLOCK_SIZE		SZ_128K
-
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 #include <linux/smsc911x.h>
 #include <plat/gpmc-smsc911x.h>

arch/arm/mach-omap2/board-cm-t3517.c

@@ -48,6 +48,7 @@
 
 #include "mux.h"
 #include "control.h"
+#include "common-board-devices.h"
 
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led cm_t3517_leds[] = {
@@ -177,7 +178,7 @@ static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
 	.reset_gpio_port[2]  = -EINVAL,
 };
 
-static int cm_t3517_init_usbh(void)
+static int __init cm_t3517_init_usbh(void)
 {
 	int err;
 
@@ -203,8 +204,6 @@ static inline int cm_t3517_init_usbh(void)
 #endif
 
 #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-#define NAND_BLOCK_SIZE		SZ_128K
-
 static struct mtd_partition cm_t3517_nand_partitions[] = {
 	{
 		.name           = "xloader",

arch/arm/mach-omap2/board-devkit8000.c

@@ -61,8 +61,6 @@
 #include "timer-gp.h"
 #include "common-board-devices.h"
 
-#define NAND_BLOCK_SIZE		SZ_128K
-
 #define OMAP_DM9000_GPIO_IRQ	25
 #define OMAP3_DEVKIT_TS_GPIO	27
 

arch/arm/mach-omap2/board-omap3beagle.c

@@ -54,8 +54,6 @@
 #include "pm.h"
 #include "common-board-devices.h"
 
-#define NAND_BLOCK_SIZE		SZ_128K
-
 /*
  * OMAP3 Beagle revision
  * Run time detection of Beagle revision is done by reading GPIO.
@@ -106,6 +104,9 @@ static void __init omap3_beagle_init_rev(void)
 	beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
 			| (gpio_get_value(173) << 2);
 
+	gpio_free_array(omap3_beagle_rev_gpios,
+			ARRAY_SIZE(omap3_beagle_rev_gpios));
+
 	switch (beagle_rev) {
 	case 7:
 		printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
@@ -579,6 +580,9 @@ static void __init omap3_beagle_init(void)
 	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
 			     ARRAY_SIZE(omap3beagle_nand_partitions));
 
+	/* Ensure msecure is mux'd to be able to set the RTC. */
+	omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
+
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);

arch/arm/mach-omap2/board-omap3pandora.c

@@ -30,6 +30,7 @@
 #include <linux/leds.h>
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
@@ -41,7 +42,6 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <mach/gpio.h>
 #include <mach/hardware.h>
 #include <plat/mcspi.h>
 #include <plat/usb.h>
@@ -57,8 +57,6 @@
 #define PANDORA_WIFI_NRESET_GPIO	23
 #define OMAP3_PANDORA_TS_GPIO		94
 
-#define NAND_BLOCK_SIZE			SZ_128K
-
 static struct mtd_partition omap3pandora_nand_partitions[] = {
 	{
 		.name           = "xloader",
@@ -86,7 +84,8 @@ static struct mtd_partition omap3pandora_nand_partitions[] = {
 
 static struct omap_nand_platform_data pandora_nand_data = {
 	.cs		= 0,
-	.devsize	= 1,	/* '0' for 8-bit, '1' for 16-bit device */
+	.devsize	= NAND_BUSWIDTH_16,
+	.xfer_type	= NAND_OMAP_PREFETCH_DMA,
 	.parts		= omap3pandora_nand_partitions,
 	.nr_parts	= ARRAY_SIZE(omap3pandora_nand_partitions),
 };

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -56,8 +56,6 @@
 
 #include <asm/setup.h>
 
-#define NAND_BLOCK_SIZE		SZ_128K
-
 #define OMAP3_AC_GPIO		136
 #define OMAP3_TS_GPIO		162
 #define TB_BL_PWM_TIMER		9

arch/arm/mach-omap2/board-omap4panda.c

@@ -526,19 +526,19 @@ static struct omap_device_pad serial4_pads[] __initdata = {
 			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
 };
 
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
 	.id             = 1,
 	.pads           = serial2_pads,
 	.pads_cnt       = ARRAY_SIZE(serial2_pads),
 };
 
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
 	.id             = 2,
 	.pads           = serial3_pads,
 	.pads_cnt       = ARRAY_SIZE(serial3_pads),
 };
 
-static struct omap_board_data serial4_data = {
+static struct omap_board_data serial4_data __initdata = {
 	.id             = 3,
 	.pads           = serial4_pads,
 	.pads_cnt       = ARRAY_SIZE(serial4_pads),
@@ -687,7 +687,7 @@ static void __init omap4_panda_init(void)
 
 	if (omap_rev() == OMAP4430_REV_ES1_0)
 		package = OMAP_PACKAGE_CBL;
-	omap4_mux_init(board_mux, package);
+	omap4_mux_init(board_mux, NULL, package);
 
 	if (wl12xx_set_platform_data(&omap_panda_wlan_data))
 		pr_err("error setting wl12xx data\n");

arch/arm/mach-omap2/board-overo.c

@@ -24,6 +24,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c/twl.h>
@@ -45,7 +46,6 @@
 #include <plat/common.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
-#include <mach/gpio.h>
 #include <plat/gpmc.h>
 #include <mach/hardware.h>
 #include <plat/nand.h>
@@ -65,8 +65,6 @@
 #define OVERO_GPIO_USBH_CPEN	168
 #define OVERO_GPIO_USBH_NRESET	183
 
-#define NAND_BLOCK_SIZE SZ_128K
-
 #define OVERO_SMSC911X_CS      5
 #define OVERO_SMSC911X_GPIO    176
 #define OVERO_SMSC911X2_CS     4

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -488,6 +488,7 @@ static struct regulator_init_data rx51_vmmc2 = {
 		.name			= "V28_A",
 		.min_uV			= 2800000,
 		.max_uV			= 3000000,
+		.always_on		= true, /* due VIO leak to AIC34 VDDs */
 		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
@@ -582,7 +583,7 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 {
 	/* FIXME this gpio setup is just a placeholder for now */
 	gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm");
-	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_HIGH, "speaker_en");
+	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en");
 
 	return 0;
 }

arch/arm/mach-omap2/board-zoom-display.c

@@ -26,7 +26,7 @@ static struct gpio zoom_lcd_gpios[] __initdata = {
 	{ LCD_PANEL_QVGA_GPIO,	GPIOF_OUT_INIT_HIGH, "lcd qvga"	 },
 };
 
-static void zoom_lcd_panel_init(void)
+static void __init zoom_lcd_panel_init(void)
 {
 	zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
 			LCD_PANEL_RESET_GPIO_PROD :

arch/arm/mach-omap2/common-board-devices.c

@@ -85,18 +85,18 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 	struct spi_board_info *spi_bi = &ads7846_spi_board_info;
 	int err;
 
-	err = gpio_request(gpio_pendown, "TS PenDown");
+	if (board_pdata && board_pdata->get_pendown_state) {
-	if (err) {
+		err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
-		pr_err("Could not obtain gpio for TS PenDown: %d\n", err);
+		if (err) {
-		return;
+			pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+			return;
+		}
+		gpio_export(gpio_pendown, 0);
+
+		if (gpio_debounce)
+			gpio_set_debounce(gpio_pendown, gpio_debounce);
 	}
 
-	gpio_direction_input(gpio_pendown);
-	gpio_export(gpio_pendown, 0);
-
-	if (gpio_debounce)
-		gpio_set_debounce(gpio_pendown, gpio_debounce);
-
 	ads7846_config.gpio_pendown = gpio_pendown;
 
 	spi_bi->bus_num	= bus_num;

arch/arm/mach-omap2/common-board-devices.h

@@ -1,6 +1,8 @@
 #ifndef __OMAP_COMMON_BOARD_DEVICES__
 #define __OMAP_COMMON_BOARD_DEVICES__
 
+#define NAND_BLOCK_SIZE	SZ_128K
+
 struct twl4030_platform_data;
 struct mtd_partition;
 

arch/arm/mach-omap2/devices.c

@@ -97,7 +97,7 @@ static int __init omap4_l3_init(void)
 
 	WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
 
-	return PTR_ERR(od);
+	return IS_ERR(od) ? PTR_ERR(od) : 0;
 }
 postcore_initcall(omap4_l3_init);
 

arch/arm/mach-omap2/hsmmc.c

@@ -145,6 +145,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
 				 int power_on, int vdd)
 {
 	u32 reg;
+	unsigned long timeout;
 
 	if (power_on) {
 		reg = omap4_ctrl_pad_readl(control_pbias_offset);
@@ -157,9 +158,15 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
 			OMAP4_MMC1_PWRDNZ_MASK |
 			OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
 		omap4_ctrl_pad_writel(reg, control_pbias_offset);
-		/* 4 microsec delay for comparator to generate an error*/
+
-		udelay(4);
+		timeout = jiffies + msecs_to_jiffies(5);
-		reg = omap4_ctrl_pad_readl(control_pbias_offset);
+		do {
+			reg = omap4_ctrl_pad_readl(control_pbias_offset);
+			if (!(reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK))
+				break;
+			usleep_range(100, 200);
+		} while (!time_after(jiffies, timeout));
+
 		if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) {
 			pr_err("Pbias Voltage is not same as LDO\n");
 			/* Caution : On VMODE_ERROR Power Down MMC IO */
@@ -331,6 +338,9 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	if (c->no_off)
 		mmc->slots[0].no_off = 1;
 
+	if (c->no_off_init)
+		mmc->slots[0].no_regulator_off_init = c->no_off_init;
+
 	if (c->vcc_aux_disable_is_sleep)
 		mmc->slots[0].vcc_aux_disable_is_sleep = 1;
 

arch/arm/mach-omap2/hsmmc.h

@@ -18,6 +18,7 @@ struct omap2_hsmmc_info {
 	bool	nonremovable;	/* Nonremovable e.g. eMMC */
 	bool	power_saving;	/* Try to sleep or power off when possible */
 	bool	no_off;		/* power_saving and power is not to go off */
+	bool	no_off_init;	/* no power off when not in MMC sleep state */
 	bool	vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */

arch/arm/mach-omap2/mux.c

@@ -83,6 +83,9 @@ void omap_mux_write(struct omap_mux_partition *partition, u16 val,
 void omap_mux_write_array(struct omap_mux_partition *partition,
 				 struct omap_board_mux *board_mux)
 {
+	if (!board_mux)
+		return;
+
 	while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
 		omap_mux_write(partition, board_mux->value,
 			       board_mux->reg_offset);
@@ -906,7 +909,7 @@ static struct omap_mux *omap_mux_get_by_gpio(
 u16 omap_mux_get_gpio(int gpio)
 {
 	struct omap_mux_partition *partition;
-	struct omap_mux *m;
+	struct omap_mux *m = NULL;
 
 	list_for_each_entry(partition, &mux_partitions, node) {
 		m = omap_mux_get_by_gpio(partition, gpio);

arch/arm/mach-omap2/mux.h

@@ -323,10 +323,12 @@ int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
 
 /**
  * omap4_mux_init() - initialize mux system with board specific set
- * @board_mux:		Board specific mux table
+ * @board_subset:	Board specific mux table
+ * @board_wkup_subset:	Board specific mux table for wakeup instance
  * @flags:		OMAP package type used for the board
  */
-int omap4_mux_init(struct omap_board_mux *board_mux, int flags);
+int omap4_mux_init(struct omap_board_mux *board_subset,
+	struct omap_board_mux *board_wkup_subset, int flags);
 
 /**
  * omap_mux_init - private mux init function, do not call

arch/arm/mach-omap2/mux44xx.c

@@ -1309,7 +1309,8 @@ static struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = {
 #define omap4_wkup_cbl_cbs_ball  NULL
 #endif
 
-int __init omap4_mux_init(struct omap_board_mux *board_subset, int flags)
+int __init omap4_mux_init(struct omap_board_mux *board_subset,
+	struct omap_board_mux *board_wkup_subset, int flags)
 {
 	struct omap_ball *package_balls_core;
 	struct omap_ball *package_balls_wkup = omap4_wkup_cbl_cbs_ball;
@@ -1347,7 +1348,7 @@ int __init omap4_mux_init(struct omap_board_mux *board_subset, int flags)
 			    OMAP_MUX_GPIO_IN_MODE3,
 			    OMAP4_CTRL_MODULE_PAD_WKUP_MUX_PBASE,
 			    OMAP4_CTRL_MODULE_PAD_WKUP_MUX_SIZE,
-			    omap4_wkup_muxmodes, NULL, board_subset,
+			    omap4_wkup_muxmodes, NULL, board_wkup_subset,
 			    package_balls_wkup);
 
 	return ret;

arch/arm/mach-omap2/omap_hwmod.c

@@ -1628,7 +1628,7 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
 			void *data)
 {
 	struct omap_hwmod *temp_oh;
-	int ret;
+	int ret = 0;
 
 	if (!fn)
 		return -EINVAL;

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -5109,7 +5109,7 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 	&omap44xx_iva_seq1_hwmod,
 
 	/* kbd class */
-/*	&omap44xx_kbd_hwmod, */
+	&omap44xx_kbd_hwmod,
 
 	/* mailbox class */
 	&omap44xx_mailbox_hwmod,

arch/arm/mach-omap2/omap_phy_internal.c

@@ -56,8 +56,10 @@ int omap4430_phy_init(struct device *dev)
 	/* Power down the phy */
 	__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
 
-	if (!dev)
+	if (!dev) {
+		iounmap(ctrl_base);
 		return 0;
+	}
 
 	phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
 	if (IS_ERR(phyclk)) {

arch/arm/mach-omap2/pm-debug.c

@@ -189,7 +189,7 @@ static struct dentry *pm_dbg_dir;
 
 static int pm_dbg_init_done;
 
-static int __init pm_dbg_init(void);
+static int pm_dbg_init(void);
 
 enum {
 	DEBUG_FILE_COUNTERS = 0,
@@ -595,7 +595,7 @@ static int option_set(void *data, u64 val)
 
 DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n");
 
-static int __init pm_dbg_init(void)
+static int pm_dbg_init(void)
 {
 	int i;
 	struct dentry *d;

arch/arm/mach-pxa/spitz_pm.c

@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>

arch/arm/mach-s3c2410/Makefile

@@ -10,7 +10,6 @@ obj-n				:=
 obj-				:=
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_CPU_S3C2410)	+= irq.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o

arch/arm/mach-s3c2410/irq.c

@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-struct syscore_ops s3c24xx_irq_syscore_ops = {
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
-};

arch/arm/mach-s5pv210/cpufreq.c

@@ -101,12 +101,14 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
 	unsigned long tmp, tmp1;
 	void __iomem *reg = NULL;
 
-	if (ch == DMC0)
+	if (ch == DMC0) {
 		reg = (S5P_VA_DMC0 + 0x30);
-	else if (ch == DMC1)
+	} else if (ch == DMC1) {
 		reg = (S5P_VA_DMC1 + 0x30);
-	else
+	} else {
 		printk(KERN_ERR "Cannot find DMC port\n");
+		return;
+	}
 
 	/* Find current DRAM frequency */
 	tmp = s5pv210_dram_conf[ch].freq;

arch/arm/mach-shmobile/board-ag5evm.c

@@ -382,10 +382,8 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
 }
 
 static struct sh_mobile_sdhi_info sh_sdhi1_platdata = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
 	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
-	.tmio_caps	= MMC_CAP_NONREMOVABLE,
+	.tmio_caps	= MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
 	.tmio_ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.set_pwr	= ag5evm_sdhi1_set_pwr,
 };

arch/arm/mach-shmobile/board-mackerel.c

@@ -126,7 +126,7 @@
  * ------+--------------------+--------------------+-------
  * IRQ0  | ICR1A.IRQ0SA=0010  | SDHI2 card detect  | Low
  * IRQ6  | ICR1A.IRQ6SA=0011  | Ether(LAN9220)     | High
- * IRQ7  | ICR1A.IRQ7SA=0010  | LCD Tuch Panel     | Low
+ * IRQ7  | ICR1A.IRQ7SA=0010  | LCD Touch Panel    | Low
  * IRQ8  | ICR2A.IRQ8SA=0010  | MMC/SD card detect | Low
  * IRQ9  | ICR2A.IRQ9SA=0010  | KEY(TCA6408)       | Low
  * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345)    | High
@@ -165,10 +165,10 @@
  * USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
  * But don't select both drivers in same time.
  * These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARD / IORESOURCE_IRQ_SHAREABLE.
+ * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
  *
  * Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports SHARD IRQ,
+ * This mean its register will be broken if it supports shared IRQ,
  */
 
 /*
@@ -562,7 +562,121 @@ static void __init hdmi_init_pm_clock(void)
 		clk_put(hdmi_ick);
 }
 
-/* USB1 (Host) */
+/* USBHS0 is connected to CN22 which takes a USB Mini-B plug
+ *
+ * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug,
+ * but on this particular board IRQ7 is already used by
+ * the touch screen. This leaves us with software polling.
+ */
+#define USBHS0_POLL_INTERVAL (HZ * 5)
+
+struct usbhs_private {
+	unsigned int usbphyaddr;
+	unsigned int usbcrcaddr;
+	struct renesas_usbhs_platform_info info;
+	struct delayed_work work;
+	struct platform_device *pdev;
+};
+
+#define usbhs_get_priv(pdev)				\
+	container_of(renesas_usbhs_get_info(pdev),	\
+		     struct usbhs_private, info)
+
+#define usbhs_is_connected(priv)			\
+	(!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
+
+static int usbhs_get_vbus(struct platform_device *pdev)
+{
+	return usbhs_is_connected(usbhs_get_priv(pdev));
+}
+
+static void usbhs_phy_reset(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	/* init phy */
+	__raw_writew(0x8a0a, priv->usbcrcaddr);
+}
+
+static int usbhs0_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+static void usbhs0_work_function(struct work_struct *work)
+{
+	struct usbhs_private *priv = container_of(work, struct usbhs_private,
+						  work.work);
+
+	renesas_usbhs_call_notify_hotplug(priv->pdev);
+	schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
+}
+
+static int usbhs0_hardware_init(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	priv->pdev = pdev;
+	INIT_DELAYED_WORK(&priv->work, usbhs0_work_function);
+	schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
+	return 0;
+}
+
+static void usbhs0_hardware_exit(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	cancel_delayed_work_sync(&priv->work);
+}
+
+static struct usbhs_private usbhs0_private = {
+	.usbcrcaddr	= 0xe605810c,		/* USBCR2 */
+	.info = {
+		.platform_callback = {
+			.hardware_init	= usbhs0_hardware_init,
+			.hardware_exit	= usbhs0_hardware_exit,
+			.phy_reset	= usbhs_phy_reset,
+			.get_id		= usbhs0_get_id,
+			.get_vbus	= usbhs_get_vbus,
+		},
+		.driver_param = {
+			.buswait_bwait	= 4,
+		},
+	},
+};
+
+static struct resource usbhs0_resources[] = {
+	[0] = {
+		.name	= "USBHS0",
+		.start	= 0xe6890000,
+		.end	= 0xe68900e6 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x1ca0) /* USB0_USB0I0 */,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usbhs0_device = {
+	.name	= "renesas_usbhs",
+	.id	= 0,
+	.dev = {
+		.platform_data		= &usbhs0_private.info,
+	},
+	.num_resources	= ARRAY_SIZE(usbhs0_resources),
+	.resource	= usbhs0_resources,
+};
+
+/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug
+ *
+ * Use J30 to select between Host and Function. This setting
+ * can however not be detected by software. Hotplug of USBHS1
+ * is provided via IRQ8.
+ */
+#define IRQ8 evt2irq(0x0300)
+
+/* USBHS1 USB Host support via r8a66597_hcd */
 static void usb1_host_port_power(int port, int power)
 {
 	if (!power) /* only power-on is supported for now */
@@ -579,9 +693,9 @@ static struct r8a66597_platdata usb1_host_data = {
 
 static struct resource usb1_host_resources[] = {
 	[0] = {
-		.name	= "USBHS",
+		.name	= "USBHS1",
-		.start	= 0xE68B0000,
+		.start	= 0xe68b0000,
-		.end	= 0xE68B00E6 - 1,
+		.end	= 0xe68b00e6 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -602,37 +716,14 @@ static struct platform_device usb1_host_device = {
 	.resource	= usb1_host_resources,
 };
 
-/* USB1 (Function) */
+/* USBHS1 USB Function support via renesas_usbhs */
+
 #define USB_PHY_MODE		(1 << 4)
 #define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
 #define USB_PHY_ON		(1 << 1)
 #define USB_PHY_OFF		(1 << 0)
 #define USB_PHY_INT_CLR		(USB_PHY_ON | USB_PHY_OFF)
 
-struct usbhs_private {
-	unsigned int irq;
-	unsigned int usbphyaddr;
-	unsigned int usbcrcaddr;
-	struct renesas_usbhs_platform_info info;
-};
-
-#define usbhs_get_priv(pdev)				\
-	container_of(renesas_usbhs_get_info(pdev),	\
-		     struct usbhs_private, info)
-
-#define usbhs_is_connected(priv)			\
-	(!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
-
-static int usbhs1_get_id(struct platform_device *pdev)
-{
-	return USBHS_GADGET;
-}
-
-static int usbhs1_get_vbus(struct platform_device *pdev)
-{
-	return usbhs_is_connected(usbhs_get_priv(pdev));
-}
-
 static irqreturn_t usbhs1_interrupt(int irq, void *data)
 {
 	struct platform_device *pdev = data;
@@ -654,12 +745,10 @@ static int usbhs1_hardware_init(struct platform_device *pdev)
 	struct usbhs_private *priv = usbhs_get_priv(pdev);
 	int ret;
 
-	irq_set_irq_type(priv->irq, IRQ_TYPE_LEVEL_HIGH);
-
 	/* clear interrupt status */
 	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
 
-	ret = request_irq(priv->irq, usbhs1_interrupt, 0,
+	ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH,
 			  dev_name(&pdev->dev), pdev);
 	if (ret) {
 		dev_err(&pdev->dev, "request_irq err\n");
@@ -679,15 +768,12 @@ static void usbhs1_hardware_exit(struct platform_device *pdev)
 	/* clear interrupt status */
 	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
 
-	free_irq(priv->irq, pdev);
+	free_irq(IRQ8, pdev);
 }
 
-static void usbhs1_phy_reset(struct platform_device *pdev)
+static int usbhs1_get_id(struct platform_device *pdev)
 {
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
+	return USBHS_GADGET;
-
-	/* init phy */
-	__raw_writew(0x8a0a, priv->usbcrcaddr);
 }
 
 static u32 usbhs1_pipe_cfg[] = {
@@ -710,16 +796,15 @@ static u32 usbhs1_pipe_cfg[] = {
 };
 
 static struct usbhs_private usbhs1_private = {
-	.irq		= evt2irq(0x0300),	/* IRQ8 */
+	.usbphyaddr	= 0xe60581e2,		/* USBPHY1INTAP */
-	.usbphyaddr	= 0xE60581E2,		/* USBPHY1INTAP */
+	.usbcrcaddr	= 0xe6058130,		/* USBCR4 */
-	.usbcrcaddr	= 0xE6058130,		/* USBCR4 */
 	.info = {
 		.platform_callback = {
 			.hardware_init	= usbhs1_hardware_init,
 			.hardware_exit	= usbhs1_hardware_exit,
-			.phy_reset	= usbhs1_phy_reset,
 			.get_id		= usbhs1_get_id,
-			.get_vbus	= usbhs1_get_vbus,
+			.phy_reset	= usbhs_phy_reset,
+			.get_vbus	= usbhs_get_vbus,
 		},
 		.driver_param = {
 			.buswait_bwait	= 4,
@@ -731,9 +816,9 @@ static struct usbhs_private usbhs1_private = {
 
 static struct resource usbhs1_resources[] = {
 	[0] = {
-		.name	= "USBHS",
+		.name	= "USBHS1",
-		.start	= 0xE68B0000,
+		.start	= 0xe68b0000,
-		.end	= 0xE68B00E6 - 1,
+		.end	= 0xe68b00e6 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -752,7 +837,6 @@ static struct platform_device usbhs1_device = {
 	.resource	= usbhs1_resources,
 };
 
-
 /* LED */
 static struct gpio_led mackerel_leds[] = {
 	{
@@ -1203,6 +1287,7 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
+	&usbhs0_device,
 	&usb1_host_device,
 	&usbhs1_device,
 	&leds_device,
@@ -1301,6 +1386,7 @@ static void __init mackerel_map_io(void)
 
 #define GPIO_PORT9CR	0xE6051009
 #define GPIO_PORT10CR	0xE605100A
+#define GPIO_PORT167CR	0xE60520A7
 #define GPIO_PORT168CR	0xE60520A8
 #define SRCR4		0xe61580bc
 #define USCCR1		0xE6058144
@@ -1354,17 +1440,17 @@ static void __init mackerel_init(void)
 	gpio_request(GPIO_PORT151, NULL); /* LCDDON */
 	gpio_direction_output(GPIO_PORT151, 1);
 
-	/* USB enable */
+	/* USBHS0 */
-	gpio_request(GPIO_FN_VBUS0_1,    NULL);
+	gpio_request(GPIO_FN_VBUS0_0, NULL);
-	gpio_request(GPIO_FN_IDIN_1_18,  NULL);
+	gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */
-	gpio_request(GPIO_FN_PWEN_1_115, NULL);
-	gpio_request(GPIO_FN_OVCN_1_114, NULL);
-	gpio_request(GPIO_FN_EXTLP_1,    NULL);
-	gpio_request(GPIO_FN_OVCN2_1,    NULL);
-	gpio_pull_down(GPIO_PORT168CR);
 
-	/* setup USB phy */
+	/* USBHS1 */
-	__raw_writew(0x8a0a, 0xE6058130);	/* USBCR4 */
+	gpio_request(GPIO_FN_VBUS0_1, NULL);
+	gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
+	gpio_request(GPIO_FN_IDIN_1_113, NULL);
+
+	/* USB phy tweak to make the r8a66597_hcd host driver work */
+	__raw_writew(0x8a0a, 0xe6058130);       /* USBCR4 */
 
 	/* enable FSI2 port A (ak4643) */
 	gpio_request(GPIO_FN_FSIAIBT,	NULL);

arch/arm/mach-shmobile/intc-sh73a0.c

@@ -250,6 +250,11 @@ static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
+{
+	return 0; /* always allow wakeup */
+}
+
 void __init sh73a0_init_irq(void)
 {
 	void __iomem *gic_dist_base = __io(0xf0001000);
@@ -257,6 +262,7 @@ void __init sh73a0_init_irq(void)
 	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
 
 	gic_init(0, 29, gic_dist_base, gic_cpu_base);
+	gic_arch_extn.irq_set_wake = sh73a0_set_wake;
 
 	register_intc_controller(&intcs_desc);
 

arch/arm/mach-shmobile/setup-sh7367.c

@@ -38,7 +38,7 @@ static struct plat_sci_port scif0_platform_data = {
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIF,
+	.type		= PORT_SCIFA,
 	.irqs		= { evt2irq(0xc00), evt2irq(0xc00),
 			    evt2irq(0xc00), evt2irq(0xc00) },
 };
@@ -57,7 +57,7 @@ static struct plat_sci_port scif1_platform_data = {
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIF,
+	.type		= PORT_SCIFA,
 	.irqs		= { evt2irq(0xc20), evt2irq(0xc20),
 			    evt2irq(0xc20), evt2irq(0xc20) },
 };
@@ -76,7 +76,7 @@ static struct plat_sci_port scif2_platform_data = {
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIF,
+	.type		= PORT_SCIFA,
 	.irqs		= { evt2irq(0xc40), evt2irq(0xc40),
 			    evt2irq(0xc40), evt2irq(0xc40) },
 };
@@ -95,7 +95,7 @@ static struct plat_sci_port scif3_platform_data = {
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIF,
+	.type		= PORT_SCIFA,
 	.irqs		= { evt2irq(0xc60), evt2irq(0xc60),
 			    evt2irq(0xc60), evt2irq(0xc60) },
 };
@@ -114,7 +114,7 @@ static struct plat_sci_port scif4_platform_data = {
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIF,
+	.type		= PORT_SCIFA,
 	.irqs		= { evt2irq(0xd20), evt2irq(0xd20),
 			    evt2irq(0xd20), evt2irq(0xd20) },
 };
@@ -133,7 +133,7 @@ static struct plat_sci_port scif5_platform_data = {
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIF,
+	.type		= PORT_SCIFA,
 	.irqs		= { evt2irq(0xd40), evt2irq(0xd40),
 			    evt2irq(0xd40), evt2irq(0xd40) },
 };
@@ -152,7 +152,7 @@ static struct plat_sci_port scif6_platform_data = {
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIF,
+	.type		= PORT_SCIFB,
 	.irqs		= { evt2irq(0xd60), evt2irq(0xd60),
 			    evt2irq(0xd60), evt2irq(0xd60) },
 };

arch/arm/mach-tegra/board-harmony-power.c

@@ -24,6 +24,8 @@
 
 #include <mach/irqs.h>
 
+#include "board-harmony.h"
+
 #define PMC_CTRL		0x0
 #define PMC_CTRL_INTR_LOW	(1 << 17)
 
@@ -98,7 +100,7 @@ static struct tps6586x_platform_data tps_platform = {
 	.irq_base	= TEGRA_NR_IRQS,
 	.num_subdevs	= ARRAY_SIZE(tps_devs),
 	.subdevs	= tps_devs,
-	.gpio_base	= TEGRA_NR_GPIOS,
+	.gpio_base	= HARMONY_GPIO_TPS6586X(0),
 };
 
 static struct i2c_board_info __initdata harmony_regulators[] = {

arch/arm/mach-tegra/board-harmony.h

@@ -17,7 +17,8 @@
 #ifndef _MACH_TEGRA_BOARD_HARMONY_H
 #define _MACH_TEGRA_BOARD_HARMONY_H
 
-#define HARMONY_GPIO_WM8903(_x_)	(TEGRA_NR_GPIOS + (_x_))
+#define HARMONY_GPIO_TPS6586X(_x_)	(TEGRA_NR_GPIOS + (_x_))
+#define HARMONY_GPIO_WM8903(_x_)	(HARMONY_GPIO_TPS6586X(4) + (_x_))
 
 #define TEGRA_GPIO_SD2_CD		TEGRA_GPIO_PI5
 #define TEGRA_GPIO_SD2_WP		TEGRA_GPIO_PH1

arch/arm/mach-u300/clock.h

@@ -31,7 +31,7 @@ struct clk {
 	bool reset;
 	__u16 clk_val;
 	__s8 usecount;
-	__u32 res_reg;
+	void __iomem * res_reg;
 	__u16 res_mask;
 
 	bool hw_ctrld;

arch/arm/mach-u300/include/mach/u300-regs.h

@@ -18,6 +18,12 @@
  * the defines are used for setting up the I/O memory mapping.
  */
 
+#ifdef __ASSEMBLER__
+#define IOMEM(a) (a)
+#else
+#define IOMEM(a) (void __iomem *) a
+#endif
+
 /* NAND Flash CS0 */
 #define U300_NAND_CS0_PHYS_BASE		0x80000000
 
@@ -47,13 +53,6 @@
 #define U300_SEMI_CONFIG_BASE		0x30000000
 #endif
 
-/*
- * All the following peripherals are specified at their PHYSICAL address,
- * so if you need to access them (in the kernel), you MUST use the macros
- * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
- * etc.
- */
-
 /*
  * AHB peripherals
  */
@@ -63,11 +62,11 @@
 
 /* Vectored Interrupt Controller 0, servicing 32 interrupts */
 #define U300_INTCON0_BASE		(U300_AHB_PER_PHYS_BASE+0x1000)
-#define U300_INTCON0_VBASE		(U300_AHB_PER_VIRT_BASE+0x1000)
+#define U300_INTCON0_VBASE		IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
 
 /* Vectored Interrupt Controller 1, servicing 32 interrupts */
 #define U300_INTCON1_BASE		(U300_AHB_PER_PHYS_BASE+0x2000)
-#define U300_INTCON1_VBASE		(U300_AHB_PER_VIRT_BASE+0x2000)
+#define U300_INTCON1_VBASE		IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
 
 /* Memory Stick Pro (MSPRO) controller */
 #define U300_MSPRO_BASE			(U300_AHB_PER_PHYS_BASE+0x3000)
@@ -115,7 +114,7 @@
 
 /* SYSCON */
 #define U300_SYSCON_BASE		(U300_SLOW_PER_PHYS_BASE+0x1000)
-#define U300_SYSCON_VBASE		(U300_SLOW_PER_VIRT_BASE+0x1000)
+#define U300_SYSCON_VBASE		IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
 
 /* Watchdog */
 #define U300_WDOG_BASE			(U300_SLOW_PER_PHYS_BASE+0x2000)
@@ -125,7 +124,7 @@
 
 /* APP side special timer */
 #define U300_TIMER_APP_BASE		(U300_SLOW_PER_PHYS_BASE+0x4000)
-#define U300_TIMER_APP_VBASE		(U300_SLOW_PER_VIRT_BASE+0x4000)
+#define U300_TIMER_APP_VBASE		IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
 
 /* Keypad */
 #define U300_KEYPAD_BASE		(U300_SLOW_PER_PHYS_BASE+0x5000)
@@ -181,5 +180,4 @@
  * Virtual accessor macros for static devices
  */
 
-
 #endif

arch/arm/mach-u300/timer.c

@@ -411,8 +411,7 @@ static void __init u300_timer_init(void)
 	/* Use general purpose timer 2 as clock source */
 	if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC,
 			"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
-		printk(KERN_ERR "timer: failed to initialize clock "
+		pr_err("timer: failed to initialize U300 clock source\n");
-		       "source %s\n", clocksource_u300_1mhz.name);
 
 	clockevents_calc_mult_shift(&clockevent_u300_1mhz,
 				    rate, APPTIMER_MIN_RANGE);

arch/arm/mach-ux500/cpu-db8500.c

@@ -159,6 +159,9 @@ static void __init db8500_add_gpios(void)
 		/* No custom data yet */
 	};
 
+	if (cpu_is_u8500v2())
+		pdata.supports_sleepmode = true;
+
 	dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
 			 IRQ_DB8500_GPIO0, &pdata);
 }

arch/arm/mach-vexpress/v2m.c

@@ -46,12 +46,6 @@ static struct map_desc v2m_io_desc[] __initdata = {
 	},
 };
 
-static void __init v2m_init_early(void)
-{
-	ct_desc->init_early();
-	versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
-}
-
 static void __init v2m_timer_init(void)
 {
 	u32 scctrl;
@@ -365,6 +359,13 @@ static struct clk_lookup v2m_lookups[] = {
 	},
 };
 
+static void __init v2m_init_early(void)
+{
+	ct_desc->init_early();
+	clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
+	versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
+}
+
 static void v2m_power_off(void)
 {
 	if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0))
@@ -418,8 +419,6 @@ static void __init v2m_init(void)
 {
 	int i;
 
-	clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
-
 	platform_device_register(&v2m_pcie_i2c_device);
 	platform_device_register(&v2m_ddc_i2c_device);
 	platform_device_register(&v2m_flash_device);

arch/arm/mm/context.c

@@ -24,7 +24,9 @@ DEFINE_PER_CPU(struct mm_struct *, current_mm);
 
 /*
  * We fork()ed a process, and we need a new context for the child
- * to run in.
+ * to run in.  We reserve version 0 for initial tasks so we will
+ * always allocate an ASID. The ASID 0 is reserved for the TTBR
+ * register changing sequence.
  */
 void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
@@ -34,11 +36,8 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 
 static void flush_context(void)
 {
-	u32 ttb;
+	/* set the reserved ASID before flushing the TLB */
-	/* Copy TTBR1 into TTBR0 */
+	asm("mcr	p15, 0, %0, c13, c0, 1\n" : : "r" (0));
-	asm volatile("mrc	p15, 0, %0, c2, c0, 1\n"
-		     "mcr	p15, 0, %0, c2, c0, 0"
-		     : "=r" (ttb));
 	isb();
 	local_flush_tlb_all();
 	if (icache_is_vivt_asid_tagged()) {
@@ -94,7 +93,7 @@ static void reset_context(void *info)
 		return;
 
 	smp_rmb();
-	asid = cpu_last_asid + cpu;
+	asid = cpu_last_asid + cpu + 1;
 
 	flush_context();
 	set_mm_context(mm, asid);
@@ -144,13 +143,13 @@ void __new_context(struct mm_struct *mm)
 	 * to start a new version and flush the TLB.
 	 */
 	if (unlikely((asid & ~ASID_MASK) == 0)) {
-		asid = cpu_last_asid + smp_processor_id();
+		asid = cpu_last_asid + smp_processor_id() + 1;
 		flush_context();
 #ifdef CONFIG_SMP
 		smp_wmb();
 		smp_call_function(reset_context, NULL, 1);
 #endif
-		cpu_last_asid += NR_CPUS - 1;
+		cpu_last_asid += NR_CPUS;
 	}
 
 	set_mm_context(mm, asid);

arch/arm/mm/init.c

@@ -330,6 +330,12 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
 	memblock_reserve(__pa(_stext), _end - _stext);
 #endif
 #ifdef CONFIG_BLK_DEV_INITRD
+	if (phys_initrd_size &&
+	    !memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) {
+		pr_err("INITRD: 0x%08lx+0x%08lx is not a memory region - disabling initrd\n",
+		       phys_initrd_start, phys_initrd_size);
+		phys_initrd_start = phys_initrd_size = 0;
+	}
 	if (phys_initrd_size &&
 	    memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) {
 		pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n",
@@ -635,7 +641,8 @@ void __init mem_init(void)
 			"    modules : 0x%08lx - 0x%08lx   (%4ld MB)\n"
 			"      .init : 0x%p" " - 0x%p" "   (%4d kB)\n"
 			"      .text : 0x%p" " - 0x%p" "   (%4d kB)\n"
-			"      .data : 0x%p" " - 0x%p" "   (%4d kB)\n",
+			"      .data : 0x%p" " - 0x%p" "   (%4d kB)\n"
+			"       .bss : 0x%p" " - 0x%p" "   (%4d kB)\n",
 
 			MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) +
 				(PAGE_SIZE)),
@@ -657,7 +664,8 @@ void __init mem_init(void)
 
 			MLK_ROUNDUP(__init_begin, __init_end),
 			MLK_ROUNDUP(_text, _etext),
-			MLK_ROUNDUP(_sdata, _edata));
+			MLK_ROUNDUP(_sdata, _edata),
+			MLK_ROUNDUP(__bss_start, __bss_stop));
 
 #undef MLK
 #undef MLM

arch/arm/mm/proc-arm7tdmi.S

@@ -146,7 +146,7 @@ __arm7tdmi_proc_info:
 		.long	0
 		.long	0
 		.long	v4_cache_fns
-		.size	__arm7tdmi_proc_info, . - __arm7dmi_proc_info
+		.size	__arm7tdmi_proc_info, . - __arm7tdmi_proc_info
 
 		.type	__triscenda7_proc_info, #object
 __triscenda7_proc_info:

arch/arm/mm/proc-arm9tdmi.S

@@ -116,7 +116,7 @@ __arm9tdmi_proc_info:
 		.long	0
 		.long	0
 		.long	v4_cache_fns
-		.size	__arm9tdmi_proc_info, . - __arm9dmi_proc_info
+		.size	__arm9tdmi_proc_info, . - __arm9tdmi_proc_info
 
 		.type	__p2001_proc_info, #object
 __p2001_proc_info:

arch/arm/mm/proc-v7.S

@@ -108,16 +108,18 @@ ENTRY(cpu_v7_switch_mm)
 #ifdef CONFIG_ARM_ERRATA_430973
 	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
 #endif
-	mrc	p15, 0, r2, c2, c0, 1		@ load TTB 1
+#ifdef CONFIG_ARM_ERRATA_754322
-	mcr	p15, 0, r2, c2, c0, 0		@ into TTB 0
+	dsb
+#endif
+	mcr	p15, 0, r2, c13, c0, 1		@ set reserved context ID
+	isb
+1:	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
 	isb
 #ifdef CONFIG_ARM_ERRATA_754322
 	dsb
 #endif
 	mcr	p15, 0, r1, c13, c0, 1		@ set context ID
 	isb
-	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
-	isb
 #endif
 	mov	pc, lr
 ENDPROC(cpu_v7_switch_mm)

arch/arm/plat-mxc/devices/platform-imx-dma.c

@@ -139,7 +139,7 @@ static struct sdma_script_start_addrs addr_imx35_to2 = {
 #endif
 
 #ifdef CONFIG_SOC_IMX51
-static struct sdma_script_start_addrs addr_imx51_to1 = {
+static struct sdma_script_start_addrs addr_imx51 = {
 	.ap_2_ap_addr = 642,
 	.uart_2_mcu_addr = 817,
 	.mcu_2_app_addr = 747,
@@ -196,7 +196,9 @@ static int __init imxXX_add_imx_dma(void)
 
 #if defined(CONFIG_SOC_IMX51)
 	if (cpu_is_mx51()) {
-		imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1;
+		int to_version = mx51_revision() >> 4;
+		imx51_imx_sdma_data.pdata.to_version = to_version;
+		imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51;
 		ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
 	} else
 #endif

arch/arm/plat-nomadik/include/plat/gpio.h

@@ -90,6 +90,7 @@ struct nmk_gpio_platform_data {
 	int num_gpio;
 	u32 (*get_secondary_status)(unsigned int bank);
 	void (*set_ioforce)(bool enable);
+	bool supports_sleepmode;
 };
 
 #endif /* __ASM_PLAT_GPIO_H */

arch/arm/plat-omap/include/plat/flash.h

@@ -11,6 +11,7 @@
 
 #include <linux/mtd/map.h>
 
+struct platform_device;
 extern void omap1_set_vpp(struct platform_device *pdev, int enable);
 
 #endif

arch/arm/plat-omap/include/plat/iovmm.h

@@ -29,9 +29,6 @@ struct iovm_struct {
  * lower 16 bit is used for h/w and upper 16 bit is for s/w.
  */
 #define IOVMF_SW_SHIFT		16
-#define IOVMF_HW_SIZE		(1 << IOVMF_SW_SHIFT)
-#define IOVMF_HW_MASK		(IOVMF_HW_SIZE - 1)
-#define IOVMF_SW_MASK		(~IOVMF_HW_MASK)UL
 
 /*
  * iovma: h/w flags derived from cam and ram attribute

arch/arm/plat-omap/include/plat/mmc.h

@@ -101,6 +101,9 @@ struct omap_mmc_platform_data {
 		/* If using power_saving and the MMC power is not to go off */
 		unsigned no_off:1;
 
+		/* eMMC does not handle power off when not in sleep state */
+		unsigned no_regulator_off_init:1;
+
 		/* Regulator off remapped to sleep */
 		unsigned vcc_aux_disable_is_sleep:1;