Add a more advanced BAR test that writes all BARs in one go, and then reads
them back and verifies that the value matches the BAR number bitwise OR'ed
with offset, this allows us to verify:
- The BAR number was what we intended to read
- The offset was what we intended to read
This allows us to detect potential address translation issues on the EP.
Reading back the BAR directly after writing will not allow us to detect the
case where inbound address translation on the endpoint incorrectly causes
multiple BARs to be redirected to the same memory region (within the EP).
Link: https://lore.kernel.org/r/20241116032045.2574168-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The default IPv6 multipath hash policy takes the flow label into account
when calculating a multipath hash and previous patches added a flow
label selector to IPv6 FIB rules.
Allow user space to specify a flow label in route get requests by adding
a new netlink attribute and using its value to populate the "flowlabel"
field in the IPv6 flow info structure prior to a route lookup.
Deny the attribute in RTM_{NEW,DEL}ROUTE requests by checking for it in
rtm_to_fib6_config() and returning an error if present.
A subsequent patch will use this capability to test the new flow label
selector in IPv6 FIB rules.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new FIB rule attributes which will allow user space to match on the
IPv6 flow label with a mask. Temporarily set the type of the attributes
to 'NLA_REJECT' while support is being added in the IPv6 code.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce the use cases of delay max, which can help quickly detect
potential abnormal delays in the system and record the types and specific
details of delay spikes.
Problem
========
Delay accounting can track the average delay of processes to show
system workload. However, when a process experiences a significant
delay, maybe a delay spike, which adversely affects performance,
getdelays can only display the average system delay over a period
of time. Yet, average delay is unhelpful for diagnosing delay peak.
It is not even possible to determine which type of delay has spiked,
as this information might be masked by the average delay.
Solution
=========
the 'delay max' can display delay peak since the system's startup,
which can record potential abnormal delays over time, including
the type of delay and the maximum delay. This is helpful for
quickly identifying crash caused by delay.
Use case
=========
bash# ./getdelays -d -p 244
print delayacct stats ON
PID 244
CPU count real total virtual total delay total delay average delay max
68 192000000 213676651 705643 0.010ms 0.306381ms
IO count delay total delay average delay max
0 0 0.000ms 0.000000ms
SWAP count delay total delay average delay max
0 0 0.000ms 0.000000ms
RECLAIM count delay total delay average delay max
0 0 0.000ms 0.000000ms
THRASHING count delay total delay average delay max
0 0 0.000ms 0.000000ms
COMPACT count delay total delay average delay max
0 0 0.000ms 0.000000ms
WPCOPY count delay total delay average delay max
235 15648284 0.067ms 0.263842ms
IRQ count delay total delay average delay max
0 0 0.000ms 0.000000ms
Link: https://lkml.kernel.org/r/20241203164848805CS62CQPQWG9GLdQj2_BxS@zte.com.cn
Co-developed-by: Wang Yong <wang.yong12@zte.com.cn>
Signed-off-by: Wang Yong <wang.yong12@zte.com.cn>
Co-developed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Co-developed-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Peilin He <he.peilin@zte.com.cn>
Cc: tuqiang <tu.qiang35@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Like direct file execution (e.g. ./script.sh), indirect file execution
(e.g. sh script.sh) needs to be measured and appraised. Instantiate
the new security_bprm_creds_for_exec() hook to measure and verify the
indirect file's integrity. Unlike direct file execution, indirect file
execution is optionally enforced by the interpreter.
Differentiate kernel and userspace enforced integrity audit messages.
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20241212174223.389435-9-mic@digikod.net
Signed-off-by: Kees Cook <kees@kernel.org>
The new SECBIT_EXEC_RESTRICT_FILE, SECBIT_EXEC_DENY_INTERACTIVE, and
their *_LOCKED counterparts are designed to be set by processes setting
up an execution environment, such as a user session, a container, or a
security sandbox. Unlike other securebits, these ones can be set by
unprivileged processes. Like seccomp filters or Landlock domains, the
securebits are inherited across processes.
When SECBIT_EXEC_RESTRICT_FILE is set, programs interpreting code should
control executable resources according to execveat(2) + AT_EXECVE_CHECK
(see previous commit).
When SECBIT_EXEC_DENY_INTERACTIVE is set, a process should deny
execution of user interactive commands (which excludes executable
regular files).
Being able to configure each of these securebits enables system
administrators or owner of image containers to gradually validate the
related changes and to identify potential issues (e.g. with interpreter
or audit logs).
It should be noted that unlike other security bits, the
SECBIT_EXEC_RESTRICT_FILE and SECBIT_EXEC_DENY_INTERACTIVE bits are
dedicated to user space willing to restrict itself. Because of that,
they only make sense in the context of a trusted environment (e.g.
sandbox, container, user session, full system) where the process
changing its behavior (according to these bits) and all its parent
processes are trusted. Otherwise, any parent process could just execute
its own malicious code (interpreting a script or not), or even enforce a
seccomp filter to mask these bits.
Such a secure environment can be achieved with an appropriate access
control (e.g. mount's noexec option, file access rights, LSM policy) and
an enlighten ld.so checking that libraries are allowed for execution
e.g., to protect against illegitimate use of LD_PRELOAD.
Ptrace restrictions according to these securebits would not make sense
because of the processes' trust assumption.
Scripts may need some changes to deal with untrusted data (e.g. stdin,
environment variables), but that is outside the scope of the kernel.
See chromeOS's documentation about script execution control and the
related threat model:
https://www.chromium.org/chromium-os/developer-library/guides/security/noexec-shell-scripts/
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Moore <paul@paul-moore.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Jeff Xu <jeffxu@chromium.org>
Tested-by: Jeff Xu <jeffxu@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20241212174223.389435-3-mic@digikod.net
Signed-off-by: Kees Cook <kees@kernel.org>
Add a new AT_EXECVE_CHECK flag to execveat(2) to check if a file would
be allowed for execution. The main use case is for script interpreters
and dynamic linkers to check execution permission according to the
kernel's security policy. Another use case is to add context to access
logs e.g., which script (instead of interpreter) accessed a file. As
any executable code, scripts could also use this check [1].
This is different from faccessat(2) + X_OK which only checks a subset of
access rights (i.e. inode permission and mount options for regular
files), but not the full context (e.g. all LSM access checks). The main
use case for access(2) is for SUID processes to (partially) check access
on behalf of their caller. The main use case for execveat(2) +
AT_EXECVE_CHECK is to check if a script execution would be allowed,
according to all the different restrictions in place. Because the use
of AT_EXECVE_CHECK follows the exact kernel semantic as for a real
execution, user space gets the same error codes.
An interesting point of using execveat(2) instead of openat2(2) is that
it decouples the check from the enforcement. Indeed, the security check
can be logged (e.g. with audit) without blocking an execution
environment not yet ready to enforce a strict security policy.
LSMs can control or log execution requests with
security_bprm_creds_for_exec(). However, to enforce a consistent and
complete access control (e.g. on binary's dependencies) LSMs should
restrict file executability, or measure executed files, with
security_file_open() by checking file->f_flags & __FMODE_EXEC.
Because AT_EXECVE_CHECK is dedicated to user space interpreters, it
doesn't make sense for the kernel to parse the checked files, look for
interpreters known to the kernel (e.g. ELF, shebang), and return ENOEXEC
if the format is unknown. Because of that, security_bprm_check() is
never called when AT_EXECVE_CHECK is used.
It should be noted that script interpreters cannot directly use
execveat(2) (without this new AT_EXECVE_CHECK flag) because this could
lead to unexpected behaviors e.g., `python script.sh` could lead to Bash
being executed to interpret the script. Unlike the kernel, script
interpreters may just interpret the shebang as a simple comment, which
should not change for backward compatibility reasons.
Because scripts or libraries files might not currently have the
executable permission set, or because we might want specific users to be
allowed to run arbitrary scripts, the following patch provides a dynamic
configuration mechanism with the SECBIT_EXEC_RESTRICT_FILE and
SECBIT_EXEC_DENY_INTERACTIVE securebits.
This is a redesign of the CLIP OS 4's O_MAYEXEC:
f5cb330d6b/1901_open_mayexec.patch
This patch has been used for more than a decade with customized script
interpreters. Some examples can be found here:
https://github.com/clipos-archive/clipos4_portage-overlay/search?q=O_MAYEXEC
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Jeff Xu <jeffxu@chromium.org>
Tested-by: Jeff Xu <jeffxu@chromium.org>
Link: https://docs.python.org/3/library/io.html#io.open_code [1]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20241212174223.389435-2-mic@digikod.net
Signed-off-by: Kees Cook <kees@kernel.org>
Drop the KVM_X86_DISABLE_VALID_EXITS definition, as it is misleading, and
unused in KVM *because* it is misleading. The set of exits that can be
disabled is dynamic, i.e. userspace (and KVM) must check KVM's actual
capabilities.
Suggested-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Defining a number of enum elements in uapi header is meaningless. It will
not be used as expected and can potentially lead to incompatible issue
between user space application and driver.
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217165446.2607585-2-lizhi.hou@amd.com
For input ioctl structures, it is better to check if the pad is zero.
Thus, the pad bytes might be usable in the future.
Suggested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217165446.2607585-1-lizhi.hou@amd.com
Define KVM_REG_SIZE() in the common kvm.h header, and delete the arm64 and
RISC-V versions. As evidenced by the surrounding definitions, all aspects
of the register size encoding are generic, i.e. RISC-V should have moved
arm64's definition to common code instead of copy+pasting.
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Groups can be killed during a reset even though they did nothing wrong.
That usually happens when the FW is put in a bad state by other groups,
resulting in group suspension failures when the reset happens.
If we end up in that situation, flag the group innocent and report
innocence through a new DRM_PANTHOR_GROUP_STATE flag.
Bump the minor driver version to reflect the uAPI change.
Changes in v4:
- Add an entry to the driver version changelog
- Add R-bs
Changes in v3:
- Actually report innocence to userspace
Changes in v2:
- New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211080500.2349505-1-boris.brezillon@collabora.com
Add new socket option, SO_RCVPRIORITY, to include SO_PRIORITY in the
ancillary data returned by recvmsg().
This is analogous to the existing support for SO_RCVMARK,
as implemented in commit 6fd1d51cfa ("net: SO_RCVMARK socket option
for SO_MARK with recvmsg()").
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-5-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose an "unblock after N reports" OA property, to allow userspace threads
to be woken up less frequently.
Co-developed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212224903.1853862-1-ashutosh.dixit@intel.com
Add SET_STATE ioctl to configure device power mode for aie2 device.
Three modes are supported initially.
POWER_MODE_DEFAULT: Enable clock gating and set DPM (Dynamic Power
Management) level to value which has been set by resource solver or
maximum DPM level the device supports.
POWER_MODE_HIGH: Enable clock gating and set DPM level to maximum DPM
level the device supports.
POWER_MODE_TURBO: Disable clock gating and set DPM level to maximum DPM
level the device supports.
Disabling clock gating means all clocks always run on full speed. And
the different clock frequency are used based on DPM level been set.
Initially, the driver set the power mode to default mode.
Co-developed-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com>
Signed-off-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com>
Co-developed-by: George Yang <George.Yang@amd.com>
Signed-off-by: George Yang <George.Yang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213232933.1545388-4-lizhi.hou@amd.com
The macros giving the direction of the crossing thresholds use the BIT
macro which is not exported to the userspace. Consequently when an
userspace program includes the header, it fails to compile.
Replace the macros by their litteral to allow the compilation of
userspace program using this header.
Fixes: 445936f9e2 ("thermal: core: Add user thresholds support")
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20241212201311.4143196-1-daniel.lezcano@linaro.org
[ rjw: Add Fixes: ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add the ability to pass additional attributes along with read/write.
Application can prepare attibute specific information and pass its
address using the SQE field:
__u64 attr_ptr;
Along with setting a mask indicating attributes being passed:
__u64 attr_type_mask;
Overall 64 attributes are allowed and currently one attribute
'IORING_RW_ATTR_FLAG_PI' is supported.
With PI attribute, userspace can pass following information:
- flags: integrity check flags IO_INTEGRITY_CHK_{GUARD/APPTAG/REFTAG}
- len: length of PI/metadata buffer
- addr: address of metadata buffer
- seed: seed value for reftag remapping
- app_tag: application defined 16b value
Process this information to prepare uio_meta_descriptor and pass it down
using kiocb->private.
PI attribute is supported only for direct IO.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20241128112240.8867-7-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add flags to describe checks for integrity meta buffer. Also, introduce
a new 'uio_meta' structure that upper layer can use to pass the
meta/integrity information.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241128112240.8867-5-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce support for ETHTOOL_MSG_TSCONFIG_GET/SET ethtool netlink socket
to read and configure hwtstamp configuration of a PHC provider. Note that
simultaneous hwtstamp isn't supported; configuring a new one disables the
previous setting.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Either the MAC or the PHY can provide hwtstamp, so we should be able to
read the tsinfo for any hwtstamp provider.
Enhance 'get' command to retrieve tsinfo of hwtstamp providers within a
network topology.
Add support for a specific dump command to retrieve all hwtstamp
providers within the network topology, with added functionality for
filtered dump to target a single interface.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce the description of a hwtstamp provider, mainly defined with a
the hwtstamp source and the phydev pointer.
Add a hwtstamp provider description within the netdev structure to
allow saving the hwtstamp we want to use. This prepares for future
support of an ethtool netlink command to select the desired hwtstamp
provider. By default, the old API that does not support hwtstamp
selectability is used, meaning the hwtstamp provider pointer is unset.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This introduces 5 counters to keep track of key updates:
Tls{Rx,Tx}Rekey{Ok,Error} and TlsRxRekeyReceived.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change introduces netlink notifications for multicast address
changes. The following features are included:
* Addition and deletion of multicast addresses are reported using
RTM_NEWMULTICAST and RTM_DELMULTICAST messages with AF_INET and
AF_INET6.
* Two new notification groups: RTNLGRP_IPV4_MCADDR and
RTNLGRP_IPV6_MCADDR are introduced for receiving these events.
This change allows user space applications (e.g., ip monitor) to
efficiently track multicast group memberships by listening for netlink
events. Previously, applications relied on inefficient polling of
procfs, introducing delays. With netlink notifications, applications
receive realtime updates on multicast group membership changes,
enabling more precise metrics collection and system monitoring.
This change also unlocks the potential for implementing a wide range
of sophisticated multicast related features in user space by allowing
applications to combine kernel provided multicast address information
with user space data and communicate decisions back to the kernel for
more fine grained control. This mechanism can be used for various
purposes, including multicast filtering, IGMP/MLD offload, and
IGMP/MLD snooping.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Co-developed-by: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Signed-off-by: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Link: https://lore.kernel.org/r/20180906091056.21109-1-pruddy@vyatta.att-mail.com
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fd_array attribute of the BPF_PROG_LOAD syscall may contain a set
of file descriptors: maps or btfs. This field was introduced as a
sparse array. Introduce a new attribute, fd_array_cnt, which, if
present, indicates that the fd_array is a continuous array of the
corresponding length.
If fd_array_cnt is non-zero, then every map in the fd_array will be
bound to the program, as if it was used by the program. This
functionality is similar to the BPF_PROG_BIND_MAP syscall, but such
maps can be used by the verifier during the program load.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241213130934.1087929-5-aspsk@isovalent.com
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
This function is base on the accelerator implementation
for compress API:
04177158cf ("ALSA: compress_offload: introduce accel operation mode")
Audio signal processing also has the requirement for memory to
memory similar as Video.
This asrc memory to memory (memory ->asrc->memory) case is a non
real time use case.
User fills the input buffer to the asrc module, after conversion, then asrc
sends back the output buffer to user. So it is not a traditional ALSA playback
and capture case.
Because we had implemented the "memory -> asrc ->i2s device-> codec"
use case in ALSA. Now the "memory->asrc->memory" needs
to reuse the code in asrc driver, so the patch 1 and patch 2 is for refining
the code to make it can be shared by the "memory->asrc->memory"
driver.
Other change is to add memory to memory support for two kinds of i.MX ASRC
modules.
The documentation header for struct qaic_manage_trans_passthrough has a
typo - "t" is missing in "transaction".
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Youssef Samir <quic_yabdulra@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129202845.3579306-1-quic_jhugo@quicinc.com
New tokens are added to topology:
1202: SOF_TKN_STREAM_PLAYBACK_PAUSE_SUPPORTED
1203: SOF_TKN_STREAM_CAPTURE_PAUSE_SUPPORTED
The new tokens are used to advertise support for PAUSE/RESUME operation on
a PCM device depending on firmware product, use case, pipeline topology.
The snd_sof_pcm_stream.pause_supported is updated to reflect the advertised
value for the PCM device.
If the token does not exist then the pause_supported is set to false.
Note: it is up to the platform code to use this flag to decide to advertise
the PAUSE support for user space or not.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20241213101123.27318-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add 'pcm_format' for struct snd_codec, add 'pcm_formats' for
struct snd_codec_desc, these are used for accelerator usage.
Current accelerator example is sample rate converter (SRC).
Define struct snd_codec_desc_src for descript minmum and maxmum
sample rates. And add 'src_d' in union snd_codec_options
structure. These are mainly used for capbility query.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20241212074509.3445859-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
