Move the filename arguments and file-descriptor handling from
init_output_elf() and linker_load_obj_file() and instead handle them
at the top-level in bpf_linker__new() and bpf_linker__add_file().
This will allow the inner functions to be shared with a new,
non-filename-based, API in the next commit.
Signed-off-by: Alastair Robertson <ajor@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241211164030.573042-2-ajor@meta.com
Ensure that performing narrow ctx loads other than size == 8 are
rejected when the argument is a pointer type.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241212092050.3204165-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Robert Morris reported the following program type which passes the
verifier in [0]:
SEC("struct_ops/bpf_cubic_init")
void BPF_PROG(bpf_cubic_init, struct sock *sk)
{
asm volatile("r2 = *(u16*)(r1 + 0)"); // verifier should demand u64
asm volatile("*(u32 *)(r2 +1504) = 0"); // 1280 in some configs
}
The second line may or may not work, but the first instruction shouldn't
pass, as it's a narrow load into the context structure of the struct ops
callback. The code falls back to btf_ctx_access to ensure correctness
and obtaining the types of pointers. Ensure that the size of the access
is correctly checked to be 8 bytes, otherwise the verifier thinks the
narrow load obtained a trusted BTF pointer and will permit loads/stores
as it sees fit.
Perform the check on size after we've verified that the load is for a
pointer field, as for scalar values narrow loads are fine. Access to
structs passed as arguments to a BPF program are also treated as
scalars, therefore no adjustment is needed in their case.
Existing verifier selftests are broken by this change, but because they
were incorrect. Verifier tests for d_path were performing narrow load
into context to obtain path pointer, had this program actually run it
would cause a crash. The same holds for verifier_btf_ctx_access tests.
[0]: https://lore.kernel.org/bpf/51338.1732985814@localhost
Fixes: 9e15db6613 ("bpf: Implement accurate raw_tp context access via BTF")
Reported-by: Robert Morris <rtm@mit.edu>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241212092050.3204165-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend changes_pkt_data tests with test cases freplacing the main
program that does not have subprograms. Try four combinations when
both main program and replacement do and do not change packet data.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241212070711.427443-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - fix to a fix:
- rtnetlink: fix error code in rtnl_newlink()
- tipc: fix NULL deref in cleanup_bearer()
Current release - regressions:
- ip: fix warning about invalid return from in ip_route_input_rcu()
Current release - new code bugs:
- udp: fix L4 hash after reconnect
- eth: lan969x: fix cyclic dependency between modules
- eth: bnxt_en: fix potential crash when dumping FW log coredump
Previous releases - regressions:
- wifi: mac80211:
- fix a queue stall in certain cases of channel switch
- wake the queues in case of failure in resume
- splice: do not checksum AF_UNIX sockets
- virtio_net: fix BUG()s in BQL support due to incorrect accounting
of purged packets during interface stop
- eth: stmmac: fix TSO DMA API mis-usage causing oops
- eth: bnxt_en: fixes for HW GRO: GSO type on 5750X chips and
oops due to incorrect aggregation ID mask on 5760X chips
Previous releases - always broken:
- Bluetooth: improve setsockopt() handling of malformed user input
- eth: ocelot: fix PTP timestamping in presence of packet loss
- ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply
not supported
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TDKt
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter and wireless.
Current release - fix to a fix:
- rtnetlink: fix error code in rtnl_newlink()
- tipc: fix NULL deref in cleanup_bearer()
Current release - regressions:
- ip: fix warning about invalid return from in ip_route_input_rcu()
Current release - new code bugs:
- udp: fix L4 hash after reconnect
- eth: lan969x: fix cyclic dependency between modules
- eth: bnxt_en: fix potential crash when dumping FW log coredump
Previous releases - regressions:
- wifi: mac80211:
- fix a queue stall in certain cases of channel switch
- wake the queues in case of failure in resume
- splice: do not checksum AF_UNIX sockets
- virtio_net: fix BUG()s in BQL support due to incorrect accounting
of purged packets during interface stop
- eth:
- stmmac: fix TSO DMA API mis-usage causing oops
- bnxt_en: fixes for HW GRO: GSO type on 5750X chips and oops
due to incorrect aggregation ID mask on 5760X chips
Previous releases - always broken:
- Bluetooth: improve setsockopt() handling of malformed user input
- eth: ocelot: fix PTP timestamping in presence of packet loss
- ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply not
supported"
* tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: dsa: tag_ocelot_8021q: fix broken reception
net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries
net: renesas: rswitch: fix initial MPIC register setting
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
team: Fix initial vlan_feature set in __team_compute_features
bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
bonding: Fix initial {vlan,mpls}_feature set in bond_compute_features
net, team, bonding: Add netdev_base_features helper
net/sched: netem: account for backlog updates from child qdisc
net: dsa: felix: fix stuck CPU-injected packets with short taprio windows
splice: do not checksum AF_UNIX sockets
net: usb: qmi_wwan: add Telit FE910C04 compositions
...
When expr_parse_ctx is allocated by expr_ctx_new(),
expr_scanner_ctx->is_test isn't initialize, so it has garbage value.
this can affects the result of expr__parse() return when it parses
non-exist event literal according to garbage value.
Use calloc instead of malloc in expr_ctx_new() to fix this.
Fixes: 3340a08354 ("perf pmu-events: Fix testing with JEVENTS_ARCH=all")
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241108143424.819126-1-yeoreum.yun@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The return value from the call to readlink() is ssize_t. However, the
return value is being assigned to an size_t variable 'len', so making
'len' an ssize_t.
./tools/perf/tests/tests-scripts.c:182:5-8: WARNING: Unsigned expression compared with zero: len < 0.
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11909
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241115091527.128923-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While the value NULL+1 is never used it triggers a ubsan warning.
Restructure and comment the loop to avoid this.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241120065224.286813-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update using the new data [1] for these changes:
* Scale some metrics like dtlb_walk_ratio to percent so they display
better with Perf's 2 dp precision
* Description typos, grammar and clarifications
* Unnecessary metric formula brackets seem to have been removed in the
source but this is not a functional change
* New sve_all_percentage metric
The following command was used to generate this commit:
$ telemetry-solution/tools/perf_json_generator/generate.py \
tools/perf/ --telemetry-files \
telemetry-solution/data/pmu/cpu/neoverse/neoverse-v2.json:neoverse-n2-v2
[1]: https://gitlab.arm.com/telemetry-solution/telemetry-solution/-/blob/main/data/pmu/cpu/neoverse/neoverse-v2.json
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20241120143739.243728-1-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sample data is 64-bit aligned basically but raw data starts with
32-bit length field and data follows. In perf_event__synthesize_sample
it treats the sample data as a 64-bit array. And it needs some trick
to update the raw data properly.
But it seems some compilers are not happy with this and the program dies
siliently. I found the sample parsing test failed without any messages
on affected systems.
Let's update the code to use a 32-bit pointer directly and make sure the
result is 64-bit aligned again. No functional changes intended.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241128010325.946897-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
libcap isn't tested in the tools/build/feature/test-all.c fast path
feature detection process, so don't set it as available if test-all
manages to build.
There are other users of this feature detection mechanism, and they
explicitely ask for libcap to be tested, so are not affected by this
patch, for instance, with this patch in place:
$ make -C tools/bpf/bpftool/ clean
<SNIP>
make: Leaving directory '/home/acme/git/perf-tools-next/tools/bpf/bpftool'
⬢ [acme@toolbox perf-tools-next]$ make -C tools/bpf/bpftool/
make: Entering directory '/home/acme/git/perf-tools-next/tools/bpf/bpftool'
Auto-detecting system features:
... clang-bpf-co-re: [ on ]
... llvm: [ on ]
... libcap: [ on ]
... libbfd: [ on ]
... libelf-zstd: [ on ]
<SNIP>
LINK bpftool
make: Leaving directory '/home/acme/git/perf-tools-next/tools/bpf/bpftool'
$
$ sudo rpm -e libcap-devel
$ make -C tools/bpf/bpftool/
<SNIP>
make: Entering directory '/home/acme/git/perf-tools-next/tools/bpf/bpftool'
Auto-detecting system features:
... clang-bpf-co-re: [ on ]
... llvm: [ on ]
... libcap: [ OFF ]
... libbfd: [ on ]
... libelf-zstd: [ on ]
$
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Quentin Monnet <qmo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20241211224509.797827-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tools/build/feature/test-all.c works in conjunction with the
tools/build/Makefile.feature FEATURE_TESTS_BASIC and FEATURE_TESTS_EXTRA
contents, so that if test-all.c manages to be built, we go on and
iterate all entries in FEATURE_TESTS_BASIC + FEATURE_TESTS_EXTRA setting
them to 1.
To test this:
$ rm -rf /tmp/b ; mkdir /tmp/b ; make -C tools/perf O=/tmp/b feature-dump
$ cat /tmp/b/feature/test-all.make.output
$ ldd /tmp/b/feature/test-all.bin
linux-vdso.so.1 (0x00007f2a47a67000)
libdw.so.1 => /lib64/libdw.so.1 (0x00007f2a477cf000)
libpython3.12.so.1.0 => /lib64/libpython3.12.so.1.0 (0x00007f2a471fe000)
libm.so.6 => /lib64/libm.so.6 (0x00007f2a4711a000)
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f2a470f2000)
libtracefs.so.1 => /lib64/libtracefs.so.1 (0x00007f2a470cb000)
libcrypto.so.3 => /lib64/libcrypto.so.3 (0x00007f2a46c1b000)
libz.so.1 => /lib64/libz.so.1 (0x00007f2a46bf8000)
libbabeltrace-ctf.so.1 => /lib64/libbabeltrace-ctf.so.1 (0x00007f2a46bad000)
libcapstone.so.5 => /lib64/libcapstone.so.5 (0x00007f2a464b8000)
libopencsd_c_api.so.1 => /lib64/libopencsd_c_api.so.1 (0x00007f2a464a8000)
libopencsd.so.1 => /lib64/libopencsd.so.1 (0x00007f2a46422000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007f2a46406000)
libnuma.so.1 => /lib64/libnuma.so.1 (0x00007f2a463f6000)
libslang.so.2 => /lib64/libslang.so.2 (0x00007f2a46113000)
libperl.so.5.38 => /lib64/libperl.so.5.38 (0x00007f2a45d74000)
libc.so.6 => /lib64/libc.so.6 (0x00007f2a45b83000)
liblzma.so.5 => /lib64/liblzma.so.5 (0x00007f2a45b50000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007f2a45a91000)
libbz2.so.1 => /lib64/libbz2.so.1 (0x00007f2a45a7b000)
/lib64/ld-linux-x86-64.so.2 (0x00007f2a47a69000)
libbabeltrace.so.1 => /lib64/libbabeltrace.so.1 (0x00007f2a45a6b000)
libpopt.so.0 => /lib64/libpopt.so.0 (0x00007f2a45a5b000)
libuuid.so.1 => /lib64/libuuid.so.1 (0x00007f2a45a51000)
libgmodule-2.0.so.0 => /lib64/libgmodule-2.0.so.0 (0x00007f2a45a4a000)
libglib-2.0.so.0 => /lib64/libglib-2.0.so.0 (0x00007f2a458fa000)
libstdc++.so.6 => /lib64/libstdc++.so.6 (0x00007f2a45696000)
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007f2a45668000)
libcrypt.so.2 => /lib64/libcrypt.so.2 (0x00007f2a45630000)
libpcre2-8.so.0 => /lib64/libpcre2-8.so.0 (0x00007f2a45590000)
$ head /tmp/b/FEATURE-DUMP
feature-backtrace=1
feature-libdw=1
feature-eventfd=1
feature-fortify-source=1
feature-get_current_dir_name=1
feature-gettid=1
feature-glibc=1
feature-libbfd=1
feature-libbfd-buildid=1
feature-libcap=1
$
There are inconsistencies that are being audited, as can be seen above
with the libcap case, that is not linked with test-all.bin nor is
present in test-all.c, so shouldn't be set as present. Further patches
are going to address those inconsistencies, but lets document this a bit
more to reduce the chances of this happening again.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20241211224509.797827-2-acme@kernel.org
[ Fixed typo pointed out by Ian Rogers ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces a new probe to check whether the kernel supports
instruction set extensions v4. The v4 extension comprises several new
instructions: BPF_{SDIV,SMOD} (signed div and mod), BPF_{LD,LDX,ST,STX,MOV}
(sign-extended load/store/move), 32-bit BPF_JA (unconditional jump),
target-independent BPF_ALU64 BSWAP (byte-swapping 16/32/64).
These have been introduced in the following commits respectively:
* ec0e2da95f ("bpf: Support new signed div/mod instructions.")
* 1f9a1ea821 ("bpf: Support new sign-extension load insns")
* 8100928c88 ("bpf: Support new sign-extension mov insns")
* 4cd58e9af8 ("bpf: Support new 32bit offset jmp instruction")
* 0845c3db7b ("bpf: Support new unconditional bswap instruction")
Support in bpftool for previous ISA extensions was added in commit
0fd800b245 ("bpftool: Probe for instruction set extensions"). These
probes are useful for userspace BPF projects that want to use newer
instruction set extensions on newer kernels, to reduce the programs'
sizes or their complexity.
LLVM provides the mcpu=v4 option since LLVM commit 8f28e8069c4b ("[BPF]
support for BPF_ST instruction in codegen") [0].
Signed-off-by: Simone Magnani <simone.magnani@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: 8f28e8069c [0]
Link: https://lore.kernel.org/bpf/20241209145439.336362-1-simone.magnani@isovalent.com
-----BEGIN PGP SIGNATURE-----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=JEfQ
-----END PGP SIGNATURE-----
Merge tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix bogus test reports in rpath.sh selftest by adding permanent
neighbor entries, from Phil Sutter.
2) Lockdep reports possible ABBA deadlock in xt_IDLETIMER, fix it by
removing sysfs out of the mutex section, also from Phil Sutter.
3) It is illegal to release basechain via RCU callback, for several
reasons. Keep it simple and safe by calling synchronize_rcu() instead.
This is a partially reverting a botched recent attempt of me to fix
this basechain release path on netdevice removal.
From Florian Westphal.
netfilter pull request 24-12-11
* tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: do not defer rule destruction via call_rcu
netfilter: IDLETIMER: Fix for possible ABBA deadlock
selftests: netfilter: Stabilize rpath.sh
====================
Link: https://patch.msgid.link/20241211230130.176937-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Historically, DSA drivers have seen problems with the model in which
bridge VLANs work, particularly with them being offloaded to switchdev
asynchronously relative to when they become active (vlan_filtering=1).
This switchdev API peculiarity was papered over by commit 2ea7a679ca
("net: dsa: Don't add vlans when vlan filtering is disabled"), which
introduced other problems, fixed by commit 54a0ed0df4 ("net: dsa:
provide an option for drivers to always receive bridge VLANs") through
an opt-in ds->configure_vlan_while_not_filtering bool (which later
became an opt-out).
The point is that some DSA drivers still skip VLAN configuration while
VLAN-unaware, and there is a desire to get rid of that behavior.
It's hard to deduce from the wording "at least one corner case" what
Andrew saw, but my best guess is that there is a discrepancy of meaning
between bridge pvid and hardware port pvid which caused breakage.
On one side, the Linux bridge with vlan_filtering=0 is completely
VLAN-unaware, and will accept and process a packet the same way
irrespective of the VLAN groups on the ports or the bridge itself
(there may not even be a pvid, and this makes no difference).
On the other hand, DSA switches still do VLAN processing internally,
even with vlan_filtering disabled, but they are expected to classify all
packets to the port pvid. That pvid shouldn't be confused with the
bridge pvid, and there lies the problem.
When a switch port is under a VLAN-unaware bridge, the hardware pvid
must be explicitly managed by the driver to classify all received
packets to it, regardless of bridge VLAN groups. When under a VLAN-aware
bridge, the hardware pvid must be synchronized to the bridge port pvid.
To do this correctly, the pattern is unfortunately a bit complicated,
and involves hooking the pvid change logic into quite a few places
(the ones that change the input variables which determine the value to
use as hardware pvid for a port). See mv88e6xxx_port_commit_pvid(),
sja1105_commit_pvid(), ocelot_port_set_pvid() etc.
The point is that not all drivers used to do that, especially in older
kernels. If a driver is to blindly program a bridge pvid VLAN received
from switchdev while it's VLAN-unaware, this might in turn change the
hardware pvid used by a VLAN-unaware bridge port, which might result in
packet loss depending which other ports have that pvid too (in that same
note, it might also go unnoticed).
To capture that condition, it is sufficient to take a VLAN-unaware
bridge and change the [VLAN-aware] bridge pvid on a single port, to a
VID that isn't present on any other port. This shouldn't have absolutely
any effect on packet classification or forwarding. However, broken
drivers will take the bait, and change their PVID to 3, causing packet
loss.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241210233541.1401837-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since the linked fixes: commit, err is returned uninitialized due to the
removal of "return 0". Initialize err to fix it.
This fixes the following intermittent test failure on release builds:
$ perf test "testsuite_probe"
...
-- [ FAIL ] -- perf_probe :: test_invalid_options :: mutually exclusive options :: -L foo -V bar (output regexp parsing)
Regexp not found: \"Error: switch .+ cannot be used with switch .+\"
...
Fixes: 080e47b2a2 ("perf probe: Introduce quotation marks support")
Tested-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241211085525.519458-2-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
We have a tools/build/feature/test-all.c that has the most common set of
features that perf uses and are expected to have its development files
available when building perf.
When we made libwunwind opt-in we forgot to remove them from the list of
features that are assumed to be available when test-all.c builds, remove
them.
Before this patch:
$ rm -rf /tmp/b ; mkdir /tmp/b ; make -C tools/perf O=/tmp/b feature-dump ; grep feature-libunwind-aarch64= /tmp/b/FEATURE-DUMP
feature-libunwind-aarch64=1
$
Even tho this not being test built and those header files being
available:
$ head -5 tools/build/feature/test-libunwind-aarch64.c
// SPDX-License-Identifier: GPL-2.0
#include <libunwind-aarch64.h>
#include <stdlib.h>
extern int UNW_OBJ(dwarf_search_unwind_table) (unw_addr_space_t as,
$
After this patch:
$ grep feature-libunwind- /tmp/b/FEATURE-DUMP
$
Now an audit on what is being enabled when test-all.c builds will be
performed.
Fixes: 176c9d1e6a ("tools features: Don't check for libunwind devel files by default")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On some systems, neighbor discoveries from ns1 for fec0:42::1 (i.e., the
martian trap address) would happen at the wrong time and cause
false-negative test result.
Problem analysis also discovered that IPv6 martian ping test was broken
in that sent neighbor discoveries, not echo requests were inadvertently
trapped
Avoid the race condition by introducing the neighbors to each other
upfront. Also pin down the firewall rules to matching on echo requests
only.
Fixes: efb056e5f1 ("netfilter: ip6t_rpfilter: Fix regression with VRF interfaces")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-- fixes the offset for kprobe syntax error test case when checking the
BTF arguments on 64-bit powerpc.
-----BEGIN PGP SIGNATURE-----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=KjAu
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
- fix the offset for kprobe syntax error test case when checking the
BTF arguments on 64-bit powerpc
* tag 'linux_kselftest-fixes-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: adjust offset for kprobe syntax error test
After `make run_tests`, the git status complains:
Untracked files:
(use "git add <file>..." to include in what will be committed)
zram/err.log
This file will be cleaned up when execute 'make clean'
Link: https://lore.kernel.org/r/20241211004625.5308-1-lizhijian@fujitsu.com
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Compiled binary files should be added to .gitignore
'git status' complains:
Untracked files:
(use "git add <file>..." to include in what will be committed)
filesystems/statmount/statmount_test_ns
Link: https://lore.kernel.org/r/20241211004947.5806-1-lizhijian@fujitsu.com
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since the linked fixes: commit, specifying a CPU on hybrid platforms
results in an error because Perf tries to open an extended type event
on "any" CPU which isn't valid. Extended type events can only be opened
on CPUs that match the type.
Before (working):
$ perf record --cpu 1 -- true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.385 MB perf.data (7 samples) ]
After (not working):
$ perf record -C 1 -- true
WARNING: A requested CPU in '1' is not supported by PMU 'cpu_atom' (CPUs 16-27) for event 'cycles:P'
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cpu_atom/cycles:P/).
/bin/dmesg | grep -i perf may provide additional information.
(Ignore the warning message, that's expected and not particularly
relevant to this issue).
This is because perf_cpu_map__intersect() of the user specified CPU (1)
and one of the PMU's CPUs (16-27) correctly results in an empty (NULL)
CPU map. However for the purposes of opening an event, libperf converts
empty CPU maps into an any CPU (-1) which the kernel rejects.
Fix it by deleting evsels with empty CPU maps in the specific case where
user requested CPU maps are evaluated.
Fixes: 251aa04024 ("perf parse-events: Wildcard most "numeric" events")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20241114160450.295844-2-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Update the functions that print the test totals at the end of a selftest
to include a warning message when skipped tests are detected. The
message advises users that skipped tests may indicate missing
configuration options and suggests enabling them to improve coverage.
Link: https://lore.kernel.org/r/20241126093710.13314-1-laura.nao@collabora.com
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In 'NOFENTRY_ARGS' test case for syntax check, any offset X of
`vfs_read+X` except function entry offset (0) fits the criterion,
even if that offset is not at instruction boundary, as the parser
comes before probing. But with "ENDBR64" instruction on x86, offset
4 is treated as function entry. So, X can't be 4 as well. Thus, 8
was used as offset for the test case. On 64-bit powerpc though, any
offset <= 16 can be considered function entry depending on build
configuration (see arch_kprobe_on_func_entry() for implementation
details). So, use `vfs_read+20` to accommodate that scenario too.
Link: https://lore.kernel.org/r/20241129202621.721159-1-hbathini@linux.ibm.com
Fixes: 4231f30fcc ("selftests/ftrace: Add BTF arguments test cases")
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Isolated CPUs are not allowed to be used in a non-isolated partition.
The only exception is the top cpuset which is allowed to contain boot
time isolated CPUs.
Commit ccac8e8de9 ("cgroup/cpuset: Fix remote root partition creation
problem") introduces a simplified scheme of including only partition
roots in sched domain generation. However, it does not properly account
for this exception case. This can result in leakage of isolated CPUs
into a sched domain.
Fix it by making sure that isolated CPUs are excluded from the top
cpuset before generating sched domains.
Also update the way the boot time isolated CPUs are handled in
test_cpuset_prs.sh to make sure that those isolated CPUs are really
isolated instead of just skipping them in the tests.
Fixes: ccac8e8de9 ("cgroup/cpuset: Fix remote root partition creation problem")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
maximal.bpf.c is still dispatching to and consuming from SCX_DSQ_GLOBAL.
Let's have it use its own DSQ to avoid any runtime errors.
Signed-off-by: David Vernet <void@manifault.com>
Tested-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
If perf_env__insert_bpf_prog_info() returns false due to a duplicate bpf
prog info node insertion, the temporary info_node and info_linear memory
will leak. Add a check to ensure the memory is freed if the function
returns false.
Fixes: d56354dc49 ("perf tools: Save bpf_prog_info and BTF of new BPF programs")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241205084500.823660-4-quic_zhonhan@quicinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Function __perf_env__insert_bpf_prog_info() will return without inserting
bpf prog info node into perf env again due to a duplicate bpf prog info
node insertion, causing the temporary info_linear and info_node memory to
leak. Modify the return type of this function to bool and add a check to
ensure the memory is freed if the function returns false.
Fixes: 606f972b13 ("perf bpf: Save bpf_prog_info information as headers to perf.data")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241205084500.823660-3-quic_zhonhan@quicinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If __perf_env__insert_btf() returns false due to a duplicate btf node
insertion, the temporary node will leak. Add a check to ensure the memory
is freed if the function returns false.
Fixes: a70a112317 ("perf bpf: Save BTF information as headers to perf.data")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241205084500.823660-2-quic_zhonhan@quicinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For big string offsets we output comments for what string the offset
is for. If the string contains a '*/' as seen in Intel Arrowlake event
descriptions, then this causes C parsing issues for the generated
pmu-events.c. Catch such '*/' values and escape to avoid this.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20241113165558.628856-1-irogers@google.com
[ Used return s.replace('*/', r'\*\/') based on failure followed by request by Ian ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf stat' output on aarch64 machines with topdown events wasn't
counted for in the 'perf stat STD output linter' test case. Add the
topdown metric to the skip_metric list as it is done for topdown events
on other systems.
The Topdown events are also disabled on aarch64 KVM guests because the
value of caps/slots is set to 0 due to the part of the system register
being a stub.
This prevents the metric for the topdown events from being computed,
leaving the 'perf stat' topdown metric without any value at all.
Add the "TopdownL1" to the skip_metric list as well to handle this
possibility.
Before aarch64:
100: perf stat STD output linter:
--- start ---
test child forked, pid 403305
Checking STD output: no args Unknown event name in TopdownL1 # 4.3 percent of slots slots_lost_misspeculation_fraction
---- end(-1) ----
100: perf stat STD output linter : FAILED!
Before aarch64 KVM:
100: perf stat STD output linter:
--- start ---
test child forked, pid 404671
Checking STD output: no args Unknown event name in TopdownL1
---- end(-1) ----
100: perf stat STD output linter : FAILED!
After:
100: perf stat STD output linter:
--- start ---
test child forked, pid 404777
Checking STD output: no args [Success]
Checking STD output: system wide [Success]
Checking STD output: interval [Success]
Checking STD output: per thread [Success]
Checking STD output: per node [Success]
Checking STD output: system wide no aggregation [Success]
Checking STD output: per core [Success]
Checking STD output: per cache instance [Success]
Checking STD output: per cluster [Success]
Checking STD output: per die [Success]
Checking STD output: per socket [Success]
---- end(0) ----
100: perf stat STD output linter : Ok
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241029144347.25651-1-vmolnaro@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replace unacceptable characters with '_' when generating event name from
the probing function name.
This is not for a C program. For the a C program, it will continue to
remove suffixes.
Note that this language checking depends on the debuginfo. So without
the debuginfo, perf probe will always replaces unacceptable characters
with '_'.
For example.
$ ./perf probe -x cro3 -D \"cro3::cmd::servo::run_show\"
p:probe_cro3/cro3_cmd_servo_run_show /work/cro3/target/x86_64-unknown-linux-gnu/debug/cro3:0x197530
$ ./perf probe -x /work/go/example/outyet/main -D 'main.(*Server).poll'
p:probe_main/main_Server_poll /work/go/example/outyet/main:0x353040
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/173145728160.2747044.18089011235495186810.stgit@mhiramat.roam.corp.google.com
[ Removed some extra tabs in the new struct fields ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test case with a tail call done from a global sub-program. Such
tails calls should be considered as invalidating packet pointers.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tail-called programs could execute any of the helpers that invalidate
packet pointers. Hence, conservatively assume that each tail call
invalidates packet pointers.
Making the change in bpf_helper_changes_pkt_data() automatically makes
use of check_cfg() logic that computes 'changes_pkt_data' effect for
global sub-programs, such that the following program could be
rejected:
int tail_call(struct __sk_buff *sk)
{
bpf_tail_call_static(sk, &jmp_table, 0);
return 0;
}
SEC("tc")
int not_safe(struct __sk_buff *sk)
{
int *p = (void *)(long)sk->data;
... make p valid ...
tail_call(sk);
*p = 42; /* this is unsafe */
...
}
The tc_bpf2bpf.c:subprog_tc() needs change: mark it as a function that
can invalidate packet pointers. Otherwise, it can't be freplaced with
tailcall_freplace.c:entry_freplace() that does a tail call.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Try different combinations of global functions replacement:
- replace function that changes packet data with one that doesn't;
- replace function that changes packet data with one that does;
- replace function that doesn't change packet data with one that does;
- replace function that doesn't change packet data with one that doesn't;
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a max-latency option as discussed, in case the number of
buckets is more than 22, we don't observe the setting (for now, let's
say).
By default or if 0 is passed, the value is automatically determined
based on the number of buckets, range and minimum, so that we fill all
available buffers (equivalent to the behaviour before this patch).
We now get something like this:
# perf ftrace latency --bucket-range=20 \
--min-latency 10 \
--max-latency=100 \
-T switch_mm_irqs_off -a sleep 2
# DURATION | COUNT | GRAPH |
0 - 10 us | 1731 | ################ |
10 - 30 us | 1 | |
30 - 50 us | 0 | |
50 - 70 us | 0 | |
70 - 90 us | 0 | |
90 - 100 us | 0 | |
100 - ... us | 0 | |
Note the maximum is observed also if it doesn't cover completely a full
range (the second to last range is 10us long to let the last start at
100 sharp), this looks to me more sensible and eases the computations,
since we don't need to account for the range while filling the buckets.
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20241112181214.1171244-5-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Things below and over will be in the first and last, outlier, buckets.
Without it:
# perf ftrace latency --use-nsec --use-bpf \
--bucket-range=200 \
-T switch_mm_irqs_off -a sleep 2
# DURATION | COUNT | GRAPH |
0 - 200 ns | 0 | |
200 - 400 ns | 44 | |
400 - 600 ns | 291 | # |
600 - 800 ns | 506 | ## |
800 - 1000 ns | 148 | |
1.00 - 1.20 us | 581 | ## |
1.20 - 1.40 us | 2199 | ########## |
1.40 - 1.60 us | 1048 | #### |
1.60 - 1.80 us | 1448 | ###### |
1.80 - 2.00 us | 1091 | ##### |
2.00 - 2.20 us | 517 | ## |
2.20 - 2.40 us | 318 | # |
2.40 - 2.60 us | 370 | # |
2.60 - 2.80 us | 271 | # |
2.80 - 3.00 us | 150 | |
3.00 - 3.20 us | 85 | |
3.20 - 3.40 us | 48 | |
3.40 - 3.60 us | 40 | |
3.60 - 3.80 us | 22 | |
3.80 - 4.00 us | 13 | |
4.00 - 4.20 us | 14 | |
4.20 - ... us | 626 | ## |
#
# perf ftrace latency --use-nsec --use-bpf \
--bucket-range=20 --min-latency=1200 \
-T switch_mm_irqs_off -a sleep 2
# DURATION | COUNT | GRAPH |
0 - 1200 ns | 1243 | ##### |
1.20 - 1.22 us | 141 | |
1.22 - 1.24 us | 202 | |
1.24 - 1.26 us | 209 | |
1.26 - 1.28 us | 219 | |
1.28 - 1.30 us | 208 | |
1.30 - 1.32 us | 245 | # |
1.32 - 1.34 us | 246 | # |
1.34 - 1.36 us | 224 | # |
1.36 - 1.38 us | 219 | |
1.38 - 1.40 us | 206 | |
1.40 - 1.42 us | 190 | |
1.42 - 1.44 us | 190 | |
1.44 - 1.46 us | 146 | |
1.46 - 1.48 us | 140 | |
1.48 - 1.50 us | 125 | |
1.50 - 1.52 us | 115 | |
1.52 - 1.54 us | 102 | |
1.54 - 1.56 us | 87 | |
1.56 - 1.58 us | 90 | |
1.58 - 1.60 us | 85 | |
1.60 - ... us | 5487 | ######################## |
#
Now we want focus on the latencies starting at 1.2us, with a finer
grained range of 20ns:
This is all on a live system, so statistically interesting, but not
narrowing down on the same numbers, so a 'perf ftrace latency record'
seems interesting to then use all on the same snapshot of latencies.
A --max-latency counterpart should come next, at first limiting the
max-latency to 20 * bucket-size, as we have a fixed buckets array with
20 + 2 entries (+ for the outliers) and thus would need to make it
larger for higher latencies.
We also may need a way to ask for not considering the out of range
values (first and last buckets) when drawing the buckets bars.
Co-developed-by: Gabriele Monaco <gmonaco@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20241112181214.1171244-4-acme@kernel.org
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ftrace->use_nsec arg is being passed to both make_historgram() and
display_histogram(), since another ftrace field will be passed to those
functions in a followup patch, make them look like other functions in
this codebase that receive the 'struct perf_ftrace' pointer.
No change in logic.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20241112181214.1171244-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently warnings emitted by resolve_btfids are buried in the build log
and are slipping into mainline frequently.
Add an option to elevate warnings to hard errors so the CI bots can catch
any new warnings.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20241204-resolve_btfids-v3-1-e6a279a74cfd@weissschuh.net
Verify that the sockmap link was not severed, and socket's entry is indeed
removed from the map when the corresponding descriptor gets closed.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241202-sockmap-replace-v1-2-1e88579e7bd5@rbox.co
When compiling these selftests the host-tools directory is generated.
Add it to the .gitignore so git doesn't see these files as trackable.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The is_valid flag should reflect the validity state of both
the XXX_start and XXX_stop functions. But the use of '=' in
XXX_stop overwrites the validity state set by XXX_start. This
commit changes '=' to '|=' in XXX_stop to preserve and combine
the validity state of XXX_start and XXX_stop.
Signed-off-by: wangfushuai <wangfushuai@baidu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
After commit f79473ed92 ("pm: cpupower: Makefile: Allow overriding
cross-compiling env params") we would fail to cross compile cpupower in
buildroot which uses the recipe at [1] where only the CROSS variable is
being set.
The issue here is the use of the lazy evaluation for all variables: CC,
LD, AR, STRIP, RANLIB, rather than just CROSS.
[1]:
https://git.buildroot.net/buildroot/tree/package/linux-tools/linux-tool-cpupower.mk.in
Fixes: f79473ed92 ("pm: cpupower: Makefile: Allow overriding cross-compiling env params")
Reported-by: Florian Fainelli <florian.fainelli@broadcom.com>
Closes: https://lore.kernel.org/all/2bbabd2c-24ef-493c-a199-594e5dada3da@broadcom.com/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
After `make run_tests`, the git status complains:
Untracked files:
(use "git add <file>..." to include in what will be committed)
cpufreq/cpufreq_selftest.dmesg_cpufreq.txt
cpufreq/cpufreq_selftest.dmesg_full.txt
cpufreq/cpufreq_selftest.txt
Link: https://lore.kernel.org/all/20241122074757.1583002-1-lizhijian@fujitsu.com/
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The functions ksft_test_result_pass, ksft_test_result_fail,
ksft_test_result_xfail, and ksft_test_result_skip already exist and are
available for use in selftests, but no XPASS equivalent is
available.
This adds a new function to that family that outputs XPASS, so that it's
available for future test writers.
Link: https://lore.kernel.org/r/20241207012325.56611-1-me@steffo.eu
Signed-off-by: Stefano Pigozzi <me@steffo.eu>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
glibc added support for DT_GNU_HASH in 2006 and DT_HASH has been
obsoleted for more than one decade in many Linux distributions.
Many vDSOs support DT_GNU_HASH. This patch adds selftests support.
Link: https://lore.kernel.org/r/20241206130724.7944-2-xry111@xry111.site
Signed-off-by: Fangrui Song <i@maskray.me>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Xi Ruoyao <xry111@xry111.site> # rebase
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Delete variables "msg" and "pid" that have never been used.
Link: https://lore.kernel.org/r/20241202045827.4704-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stumbled upon this typo while looking for something else.
Link: https://lore.kernel.org/lkml/20241205194829.3449669-1-cmllamas@google.com/
Cc: Shuah Khan <shuah@kernel.org>
Fixes: fe8777a8a0 ("selftests: add media controller regression test scripts and document")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The temp directory is made and a known fake hwmon PMU created within
it. Prior to this fix the events were being incorrectly written to the
temp directory rather than the fake PMU directory. This didn't impact
the test as the directory fd matched the wrong location, but it
doesn't mirror what a hwmon PMU would actually look like.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The hwmon PMU test will make a temp directory, open the directory with
O_DIRECTORY then fill it with contents. As the open is before the
filling the contents the later fdopendir may reflect the initial empty
state, meaning no events are seen. Change to re-open the directory,
rather than dup the fd, so the latest contents are seen.
Minor tweaks/additions to debug messages.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Run VXLAN packets through a gateway. Flip individual bits of the packet
and/or reserved bits of the gateway, and check that the gateway treats the
packets as expected.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/388bef3c30ebc887d4e64cd86a362e2df2f2d2e1.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add ip_link_set_addr(), ip_link_set_up(), ip_addr_add() and ip_route_add()
to the suite of helpers that automatically schedule a corresponding
cleanup.
When setting a new MAC, one needs to remember the old address first. Move
mac_get() from forwarding/ to that end.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/add6bcbe30828fd01363266df20c338cf13aaf25.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_KPROBES_ON_FTRACE enabled on powerpc, ftrace_location_range
returns ftrace location for bpf_fentry_test1 at offset of 4 bytes from
function entry. This is because branch to _mcount function is at offset
of 4 bytes in function profile sequence.
To fix this, add entry_offset of 4 bytes while verifying the address for
kprobe entry address of bpf_fentry_test1 in verify_perf_link_info in
selftest, when CONFIG_KPROBES_ON_FTRACE is enabled.
Disassemble of bpf_fentry_test1:
c000000000e4b080 <bpf_fentry_test1>:
c000000000e4b080: a6 02 08 7c mflr r0
c000000000e4b084: b9 e2 22 4b bl c00000000007933c <_mcount>
c000000000e4b088: 01 00 63 38 addi r3,r3,1
c000000000e4b08c: b4 07 63 7c extsw r3,r3
c000000000e4b090: 20 00 80 4e blr
When CONFIG_PPC_FTRACE_OUT_OF_LINE [1] is enabled, these function profile
sequence is moved out of line with an unconditional branch at offset 0.
So, the test works without altering the offset for
'CONFIG_KPROBES_ON_FTRACE && CONFIG_PPC_FTRACE_OUT_OF_LINE' case.
Disassemble of bpf_fentry_test1:
c000000000f95190 <bpf_fentry_test1>:
c000000000f95190: 00 00 00 60 nop
c000000000f95194: 01 00 63 38 addi r3,r3,1
c000000000f95198: b4 07 63 7c extsw r3,r3
c000000000f9519c: 20 00 80 4e blr
[1] https://lore.kernel.org/all/20241030070850.1361304-13-hbathini@linux.ibm.com/
Fixes: 23cf7aa539 ("selftests/bpf: Add selftest for fill_link_info")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241209065720.234344-1-skb99@linux.ibm.com
The comparison function cmp_profile_data() violates the C standard's
requirements for qsort() comparison functions, which mandate symmetry
and transitivity:
* Symmetry: If x < y, then y > x.
* Transitivity: If x < y and y < z, then x < z.
When v1 and v2 are equal, the function incorrectly returns 1, breaking
symmetry and transitivity. This causes undefined behavior, which can
lead to memory corruption in certain versions of glibc [1].
Fix the issue by returning 0 when v1 and v2 are equal, ensuring
compliance with the C standard and preventing undefined behavior.
Link: https://www.qualys.com/2024/01/30/qsort.txt [1]
Fixes: 0f223813ed ("perf ftrace: Add 'profile' command")
Fixes: 74ae366c37 ("perf ftrace profile: Add -s/--sort option")
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: jserv@ccns.ncku.edu.tw
Cc: chuang@cs.nycu.edu.tw
Link: https://lore.kernel.org/r/20241209134226.1939163-1-visitorckw@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The temp directory is made and a known fake hwmon PMU created within
it. Prior to this fix the events were being incorrectly written to the
temp directory rather than the fake PMU directory. This didn't impact
the test as the directory fd matched the wrong location, but it
doesn't mirror what a hwmon PMU would actually look like.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hwmon PMU test will make a temp directory, open the directory with
O_DIRECTORY then fill it with contents. As the open is before the
filling the contents the later fdopendir may reflect the initial empty
state, meaning no events are seen. Change to re-open the directory,
rather than dup the fd, so the latest contents are seen.
Minor tweaks/additions to debug messages.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tracepoint parsing required libtraceevent but no longer does. Remove
the Build logic and #ifdefs that caused the tests not to be run. Test
code that directly uses libtraceevent is still guarded.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from reading the tracepoint format to reading the id directly for
the evsel config. This avoids the need to initialize libtraceevent,
plugins, etc. It is sufficient for many tracepoint commands to work
like:
$ perf stat -e sched:sched_switch true
To populate evsel->tp_format, do lazy initialization using libtraceevent
in the evsel__tp_format function (the sys and name are saved in
evsel__newtp_idx for this purpose).
Reading the id should be indicative of the format failing to load, but
if not an error is reported in evsel__tp_format. This could happen for a
tracepoint with a format that fails to parse.
As tracepoints can be parsed without libtraceevent with this, remove the
associated #ifdefs in parse-events.c.
By only lazily parsing the tracepoint format information it is hoped
this will help improve the performance of code using tracepoints but not
the format information. It also cuts down on the build and ifdef logic.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an accessor function for tp_format. Rather than search+replace
uses try to use a variable and reuse it. Add additional NULL checks
when accessing/using the value. Make sure the PTR_ERR is nulled out on
error path in evsel__newtp_idx.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
trace-event-info.c has no libtraceevent dependencies, always build it
and use it in builtin-record and perf_event_attr printing.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Capture that these functions don't mutate their input.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from returning -1 to -errno so that callers can determine types
of failure.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
get_core_id returns 0 on success and a negative errno value on error.
Currently the error can only be -1, but fixing this to be any errno
value breaks perf:
https://lore.kernel.org/lkml/Zzu4Sdebve-NXEMX@google.com/
To avoid this, make sure all error values are written as -1.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By introducing a tools/perf/util/btf.c to collect utilities not yet
available via libbpf, the first being a way to find a member by name
once we get the type_id for the struct.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of growing the array by 2048, grow by the larger of the current
range or 16.
As ranges are typical for things like the online CPUs this will mean a
single allocation happens.
While uncore CPU maps will grow 16 at a time which is a value that is
generous except say on large servers.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Function is no longer used and duplicates the parsing logic from
perf_cpu_map__new().
Remove to allow simplification.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-8-irogers@google.com
[ Applied manually to cope with "libperf cpumap: Refactor perf_cpu_map__merge()" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove use of a FILE and switch to reading a string that is then
passed to perf_cpu_map__new().
Being able to remove perf_cpu_map__read() avoids duplicated parsing
logic.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove use of a FILE and switch to reading a string that is then
passed to perf_cpu_map__new().
Being able to remove perf_cpu_map__read() avoids duplicated parsing logic.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
File cpumasks often have a newline that shouldn't trigger the invalid
parsing case in perf_cpu_map__new().
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid redefinition of MAX_NR_CPUS as a global constant, the original
definition is tools/perf/perf.h.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
libperf exposes MAX_NR_CPUS via tools/lib/perf/include/internal/cpumap.h
which is internal.
The preferred dependency should be the definition in tools/perf/perf.h.
Add the includes of perf.h so that MAX_NR_CPUS can be hidden in libperf.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Systems have surpassed 2048 CPUs. Increase MAX_NR_CPUS to 4096.
Bitmaps declared with MAX_NR_CPUS bits will increase from 256B to 512B,
cpus_runtime will increase from 81960B to 163880B, and max_entries will
increase from 8192B to 16384B.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Decode SPE Data Source packets on AmpereOne. The field is IMPDEF.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20241108202946.16835-3-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Split Data Source Packet handling to prepare adding support for
other implementations.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20241108202946.16835-2-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For the CPU map merging test, add an extra check for the reference
counter before releasing the last CPU map.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241107125308.41226-4-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add additional tests for CPU map merging to cover more cases.
These tests include different types of arguments, such as when one CPU
map is a subset of another, as well as cases with or without overlap
between the two maps.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241107125308.41226-3-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_cpu_map__merge() function has two arguments, 'orig' and
'other'. The function definition might cause confusion as it could give
the impression that the CPU maps in the two arguments are copied into a
new allocated structure, which is then returned as the result.
The purpose of the function is to merge the CPU map 'other' into the CPU
map 'orig'. This commit changes the 'orig' argument to a pointer to
pointer, so the new result will be updated into 'orig'.
The return value is changed to an int type, as an error number or 0 for
success.
Update callers and tests for the new function definition.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241107125308.41226-2-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just a trivial typo, should be 'can', did a spell check on the rest of
the file just in case, nothing more stood out.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously system RAM and persistent memory were hard code matched,
change so that the label of the memory region is just read from
/proc/iomem. This avoids frequent N/A samples.
Change the /proc/iomem reading, event processing and output so that
nested entries appear and their counts count toward their parent. As
labels may be repeated, include the memory ranges in the output to make
it clear why, for example, "System RAM" appears twice.
Before:
Event: mem_inst_retired.all_loads:P
Memory type count percentage
---------------------------------------- ---------- ----------
System RAM 9460 96.5%
N/A 998 3.5%
After:
Event: mem_inst_retired.all_loads:P
Memory type count percentage
---------------------------------------- ---------- ----------
100000000-105f7fffff : System RAM 36741 96.5
841400000-8416599ff : Kernel data 89 0.2
840800000-8412a6fff : Kernel rodata 60 0.2
841ebe000-8423fffff : Kernel bss 34 0.1
0-fff : Reserved 1345 3.5
100000-89dd9fff : System RAM 2 0.0
Before:
Event: mem_inst_retired.any:P
Memory type count percentage
---------------------------------------- ----------- -----------
System RAM 9460 90.5%
N/A 998 9.5%
After:
Event: mem_inst_retired.any:P
Memory type count percentage
---------------------------------------- ---------- ----------
100000000-105f7fffff : System RAM 9460 90.5
841400000-8416599ff : Kernel data 45 0.4
840800000-8412a6fff : Kernel rodata 19 0.2
841ebe000-8423fffff : Kernel bss 12 0.1
0-fff : Reserved 998 9.5
The code has been updated to python 3 with type hints and resolving
issues reported by mypy and pylint. Tabs are swapped to spaces as
preferred in PEP8, because most lines of code were modified (of this
small file) and this makes pylint significantly less noisy.
Committer testing:
root@number:/tmp# grep -m1 "model name" /proc/cpuinfo
model name : Intel(R) Core(TM) i7-14700K
root@number:/tmp#
root@number:/tmp# perf script mem-phys-addr -a find /
/bin
/lib
/lib64
/sbin
Warning:
744 out of order events recorded.
Event: cpu_core/mem_inst_retired.all_loads/P
Memory type count percentage
---------------------------------------- ---------- ----------
100000000-8bfbfffff : System RAM 364561 76.5
621400000-6223a6fff : Kernel rodata 10474 2.2
622400000-62283d4bf : Kernel data 4828 1.0
623304000-6237fffff : Kernel bss 1063 0.2
620000000-6213fffff : Kernel code 98 0.0
0-fff : Reserved 111480 23.4
100000-2b0ca017 : System RAM 337 0.1
2fbad000-30d92fff : System RAM 44 0.0
2c79d000-2fbabfff : System RAM 30 0.0
30d94000-316d5fff : System RAM 16 0.0
2b131a58-2c71dfff : System RAM 7 0.0
root@number:/tmp#
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119180130.19160-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 13e17c9ff4 ("perf build: Make libunwind opt-in rather than
opt-out"), so we shouldn't by default be testing for its availability at
build time in tools/build/features/test-all.c.
That test was designed to test the features we expect to be the most
common ones in most builds, so if we test build just that file, then we
assume the features there are present and will not test one by one.
Removing it from test-all.c gets rid of the first impediment for
test-all.c to build successfully:
$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
In file included from test-all.c:62:
test-libunwind.c:2:10: fatal error: libunwind.h: No such file or directory
2 | #include <libunwind.h>
| ^~~~~~~~~~~~~
compilation terminated.
$
We then get to:
$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
/usr/bin/ld: cannot find -lunwind-x86_64: No such file or directory
/usr/bin/ld: cannot find -lunwind: No such file or directory
collect2: error: ld returned 1 exit status
$
So make all the logic related to setting CFLAGS, LDFLAGS, etc for
libunwind to be conditional on NO_LIBWUNWIND=1, which is now the
default, now we get a faster build:
$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
$ ldd /tmp/build/perf-tools-next/feature/test-all.bin
linux-vdso.so.1 (0x00007fef04cde000)
libdw.so.1 => /lib64/libdw.so.1 (0x00007fef04a49000)
libpython3.12.so.1.0 => /lib64/libpython3.12.so.1.0 (0x00007fef04478000)
libm.so.6 => /lib64/libm.so.6 (0x00007fef04394000)
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007fef0436c000)
libtracefs.so.1 => /lib64/libtracefs.so.1 (0x00007fef04345000)
libcrypto.so.3 => /lib64/libcrypto.so.3 (0x00007fef03e95000)
libz.so.1 => /lib64/libz.so.1 (0x00007fef03e72000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007fef03e56000)
libnuma.so.1 => /lib64/libnuma.so.1 (0x00007fef03e48000)
libslang.so.2 => /lib64/libslang.so.2 (0x00007fef03b65000)
libperl.so.5.38 => /lib64/libperl.so.5.38 (0x00007fef037c6000)
libc.so.6 => /lib64/libc.so.6 (0x00007fef035d5000)
liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fef035a0000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007fef034e1000)
libbz2.so.1 => /lib64/libbz2.so.1 (0x00007fef034cd000)
/lib64/ld-linux-x86-64.so.2 (0x00007fef04ce0000)
libcrypt.so.2 => /lib64/libcrypt.so.2 (0x00007fef03495000)
$
Fixes: 13e17c9ff4 ("perf build: Make libunwind opt-in rather than opt-out")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Z09zTztD8X8qIWCX@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
hv_kvp_daemon uses popen(3) and system(3) as convinience helper to
launch external helpers. These helpers are invoked via a
temporary shell process. There is no need to keep this temporary
process around while the helper runs. Replace this temporary shell
with the actual helper process via 'exec'.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: https://lore.kernel.org/linux-hyperv/20241202123520.27812-1-olaf@aepfle.de/
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Remove the usage of cat. Replace the shell process with awk with 'exec'.
Also use a generic shell because no bash specific features will be used.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20241202120432.21115-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241202120432.21115-1-olaf@aepfle.de>
The reference implementation of hv_get_dns_info which is in the tree uses
/etc/resolv.conf to get DNS servers and this does not require to know which
NIC is queried. Distro specific implementations, however, may want to
provide per-NIC, fine grained information. E.g. NetworkManager keeps track
of DNS servers per connection.
Similar to hv_get_dhcp_info, pass NIC name as a parameter to
hv_get_dns_info script.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20241112150401.217094-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241112150401.217094-1-vkuznets@redhat.com>
Terminate endless loop in reading fails, to avoid flooding syslog.
This happens if the state of "Guest services" integration service
is changed from "enabled" to "disabled" at runtime in the VM
settings. In this case pread returns EIO.
Also handle an interrupted system call, and continue in this case.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20241105081437.15689-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241105081437.15689-1-olaf@aepfle.de>
Align permissions of the resulting .nmconnection file, instead of
the input file from hv_kvp_daemon. To avoid the tiny time frame
where the output file is world-readable, use umask instead of chmod.
Fixes: 42999c9046 ("hv/hv_kvp_daemon:Support for keyfile based connection profile")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/20241016143521.3735-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241016143521.3735-1-olaf@aepfle.de>
hv_fcopy_uio_daemon.c:436:53: warning: '%s' directive output may be truncated
writing up to 14 bytes into a region of size 10 [-Wformat-truncation=]
436 | snprintf(uio_dev_path, sizeof(uio_dev_path), "/dev/%s", uio_name);
Also added 'static' for the array 'desc[]'.
Fixes: 82b0945ce2 ("tools: hv: Add new fcopy application based on uio driver")
Cc: stable@vger.kernel.org # 6.10+
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240910004433.50254-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240910004433.50254-1-decui@microsoft.com>
Extend veristat to collect and print more stats, namely:
- program size in instructions
- jited program size in bytes
- program type
- attach type
- stack depth
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241209130455.94592-1-mykyta.yatsenko5@gmail.com
Replaced the hardcoded module name test_klp_callbacks_demo in the
pre_patch_callback log message with the variable $MOD_LIVEPATCH.
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20241125112812.281018-2-dongtai.guo@linux.dev
Signed-off-by: Petr Mladek <pmladek@suse.com>
The usual bunch of singletons - please see the relevant changelogs for
details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ1U/QwAKCRDdBJ7gKXxA
jnE7AQC0eyNNvaL5pLCIxN/Vmr8YeuWP1dldgI29TjrH/JKjSQEAihZNqVZYjoIT
Gf7Y+IKnc4LbfAXcTe+MfJFeDexM5AU=
=U5LQ
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"24 hotfixes. 17 are cc:stable. 15 are MM and 9 are non-MM.
The usual bunch of singletons - please see the relevant changelogs for
details"
* tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
iio: magnetometer: yas530: use signed integer type for clamp limits
sched/numa: fix memory leak due to the overwritten vma->numab_state
mm/damon: fix order of arguments in damos_before_apply tracepoint
lib: stackinit: hide never-taken branch from compiler
mm/filemap: don't call folio_test_locked() without a reference in next_uptodate_folio()
scatterlist: fix incorrect func name in kernel-doc
mm: correct typo in MMAP_STATE() macro
mm: respect mmap hint address when aligning for THP
mm: memcg: declare do_memsw_account inline
mm/codetag: swap tags when migrate pages
ocfs2: update seq_file index in ocfs2_dlm_seq_next
stackdepot: fix stack_depot_save_flags() in NMI context
mm: open-code page_folio() in dump_page()
mm: open-code PageTail in folio_flags() and const_folio_flags()
mm: fix vrealloc()'s KASAN poisoning logic
Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()"
selftests/damon: add _damon_sysfs.py to TEST_FILES
selftest: hugetlb_dio: fix test naming
ocfs2: free inode when ocfs2_get_init_inode() fails
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
...
Without -o the tool currently crashes, but it's not marked
as required. The only thing we can't do without it is to
generate the correct #include for user source files, but
we can put a placeholder instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241206113100.89d35bf124d6.I9228fb704e6d5c9d8e046ef15025a47a48439c1e@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix various integer type conversions by using strtoull and a temporary
variable which is bounds checked before being casted into the
appropriate cfg_* variable for use by the test program.
While here:
- free the strdup'd cfg string for overall hygenie.
- initialize napi_id = 0 in setup_queue to avoid warnings on some
compilers.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241204163239.294123-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test assumes that the packet it is sending is the only packet being
passed to the device.
However, it is not the case and so other packets are filling the buffers
as well. Therefore, the test sometimes fails because it is reading a
maximum occupancy that is larger than expected.
Add egress filters on $h1 and $h2 that will guarantee the above.
Fixes: a865ad9996 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/64c28bc9b1cc1d78c4a73feda7cedbe9526ccf8b.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On both port_tc_ip_test() and port_tc_arp_test(), the max occupancy is
checked on $h2 twice, when only the error message is different and does not
match the check itself.
Remove the two duplicated test cases from the test.
Fixes: a865ad9996 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/d9eb26f6fc16a06a30b5c2c16ad80caf502bc561.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test is sending only one packet generated with mausezahn from $h1 to
$h2. However, for some reason, it is testing for non-zero maximum occupancy
in both the ingress pool of $h1 and $h2. The former only passes when $h2
happens to send a packet.
Avoid intermittent failures by removing unintentional test case
regarding the ingress pool of $h1.
Fixes: a865ad9996 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/5b7344608d5e06f38209e48d8af8c92fa11b6742.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix several issues for BPF LPM trie map which were found by
syzbot and during addition of new test cases (Hou Tao)
- Fix a missing process_iter_arg register type check in the
BPF verifier (Kumar Kartikeya Dwivedi, Tao Lyu)
- Fix several correctness gaps in the BPF verifier when
interacting with the BPF stack without CAP_PERFMON
(Kumar Kartikeya Dwivedi, Eduard Zingerman, Tao Lyu)
- Fix OOB BPF map writes when deleting elements for the case of
xsk map as well as devmap (Maciej Fijalkowski)
- Fix xsk sockets to always clear DMA mapping information when
unmapping the pool (Larysa Zaremba)
- Fix sk_mem_uncharge logic in tcp_bpf_sendmsg to only uncharge
after sent bytes have been finalized (Zijian Zhang)
- Fix BPF sockmap with vsocks which was missing a queue check
in poll and sockmap cleanup on close (Michal Luczaj)
- Fix tools infra to override makefile ARCH variable if defined
but empty, which addresses cross-building tools. (Björn Töpel)
- Fix two resolve_btfids build warnings on unresolved bpf_lsm
symbols (Thomas Weißschuh)
- Fix a NULL pointer dereference in bpftool (Amir Mohammadi)
- Fix BPF selftests to check for CONFIG_PREEMPTION instead of
CONFIG_PREEMPT (Sebastian Andrzej Siewior)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ1N8bhUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIO6ZAD+ITpujJgxvFGC0R7E9o3XJ7V1SpmR
SlW0lGpj6vOHTUAA/2MRoZurJSTbdT3fbWiCUgU1rMcwkoErkyxUaPuBci0D
=kgXL
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Daniel Borkmann::
- Fix several issues for BPF LPM trie map which were found by syzbot
and during addition of new test cases (Hou Tao)
- Fix a missing process_iter_arg register type check in the BPF
verifier (Kumar Kartikeya Dwivedi, Tao Lyu)
- Fix several correctness gaps in the BPF verifier when interacting
with the BPF stack without CAP_PERFMON (Kumar Kartikeya Dwivedi,
Eduard Zingerman, Tao Lyu)
- Fix OOB BPF map writes when deleting elements for the case of xsk map
as well as devmap (Maciej Fijalkowski)
- Fix xsk sockets to always clear DMA mapping information when
unmapping the pool (Larysa Zaremba)
- Fix sk_mem_uncharge logic in tcp_bpf_sendmsg to only uncharge after
sent bytes have been finalized (Zijian Zhang)
- Fix BPF sockmap with vsocks which was missing a queue check in poll
and sockmap cleanup on close (Michal Luczaj)
- Fix tools infra to override makefile ARCH variable if defined but
empty, which addresses cross-building tools. (Björn Töpel)
- Fix two resolve_btfids build warnings on unresolved bpf_lsm symbols
(Thomas Weißschuh)
- Fix a NULL pointer dereference in bpftool (Amir Mohammadi)
- Fix BPF selftests to check for CONFIG_PREEMPTION instead of
CONFIG_PREEMPT (Sebastian Andrzej Siewior)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (31 commits)
selftests/bpf: Add more test cases for LPM trie
selftests/bpf: Move test_lpm_map.c to map_tests
bpf: Use raw_spinlock_t for LPM trie
bpf: Switch to bpf mem allocator for LPM trie
bpf: Fix exact match conditions in trie_get_next_key()
bpf: Handle in-place update for full LPM trie correctly
bpf: Handle BPF_EXIST and BPF_NOEXIST for LPM trie
bpf: Remove unnecessary kfree(im_node) in lpm_trie_update_elem
bpf: Remove unnecessary check when updating LPM trie
selftests/bpf: Add test for narrow spill into 64-bit spilled scalar
selftests/bpf: Add test for reading from STACK_INVALID slots
selftests/bpf: Introduce __caps_unpriv annotation for tests
bpf: Fix narrow scalar spill onto 64-bit spilled scalar slots
bpf: Don't mark STACK_INVALID as STACK_MISC in mark_stack_slot_misc
samples/bpf: Remove unnecessary -I flags from libbpf EXTRA_CFLAGS
bpf: Zero index arg error string for dynptr and iter
selftests/bpf: Add tests for iter arg check
bpf: Ensure reg is PTR_TO_STACK in process_iter_arg
tools: Override makefile ARCH variable if defined, but empty
selftests/bpf: Add apply_bytes test to test_txmsg_redir_wait_sndmem in test_sockmap
...
The selftests build four kernel modules which use copy-pasted Makefile
targets. This is a bit messy, and doesn't scale so well when we add more
modules, so let's consolidate these rules into a single rule generated
for each module name, and move the module sources into a single
directory.
To avoid parallel builds of the different modules stepping on each
other's toes during the 'modpost' phase of the Kbuild 'make modules',
the module files should really be a grouped target. However, make only
added explicit support for grouped targets in version 4.3, which is
newer than the minimum version supported by the kernel. However, make
implicitly treats pattern matching rules with multiple targets as a
grouped target, so we can work around this by turning the rule into a
pattern matching target. We do this by replacing '.ko' with '%ko' in the
targets with subst().
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/20241204-bpf-selftests-mod-compile-v5-1-b96231134a49@redhat.com
Add more test cases for LPM trie in test_maps:
1) test_lpm_trie_update_flags
It constructs various use cases for BPF_EXIST and BPF_NOEXIST and check
whether the return value of update operation is expected.
2) test_lpm_trie_update_full_maps
It tests the update operations on a full LPM trie map. Adding new node
will fail and overwriting the value of existed node will succeed.
3) test_lpm_trie_iterate_strs and test_lpm_trie_iterate_ints
There two test cases test whether the iteration through get_next_key is
sorted and expected. These two test cases delete the minimal key after
each iteration and check whether next iteration returns the second
minimal key. The only difference between these two test cases is the
former one saves strings in the LPM trie and the latter saves integers.
Without the fix of get_next_key, these two cases will fail as shown
below:
test_lpm_trie_iterate_strs(1091):FAIL:iterate #2 got abc exp abS
test_lpm_trie_iterate_ints(1142):FAIL:iterate #1 got 0x2 exp 0x1
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-10-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move test_lpm_map.c to map_tests/ to include LPM trie test cases in
regular test_maps run. Most code remains unchanged, including the use of
assert(). Only reduce n_lookups from 64K to 512, which decreases
test_lpm_map runtime from 37s to 0.7s.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-9-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running selftests I encountered the following error message with
some damon tests:
# Traceback (most recent call last):
# File "[...]/damon/./damos_quota.py", line 7, in <module>
# import _damon_sysfs
# ModuleNotFoundError: No module named '_damon_sysfs'
Fix this by adding the _damon_sysfs.py file to TEST_FILES so that it
will be available when running the respective damon selftests.
Link: https://lkml.kernel.org/r/20241127-picks-visitor-7416685b-mheyne@amazon.de
Fixes: 306abb63a8 ("selftests/damon: implement a python module for test-purpose DAMON sysfs controls")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The string logged when a test passes or fails is used by the selftest
framework to identify which test is being reported. The hugetlb_dio test
not only uses the same strings for every test that is run but it also uses
different strings for test passes and failures which means that test
automation is unable to follow what the test is doing at all.
Pull the existing duplicated logging of the number of free huge pages
before and after the test out of the conditional and replace that and the
logging of the result with a single ksft_print_result() which incorporates
the parameters passed into the test into the output.
Link: https://lkml.kernel.org/r/20241127-kselftest-mm-hugetlb-dio-names-v1-1-22aab01bf550@kernel.org
Fixes: fae1980347 ("selftests: hugetlb_dio: fixup check for initial conditions to skip in the start")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, user needs to manually enable transmit hardware timestamp
feature of certain Ethernet drivers, e.g. stmmac and igc drivers, through
following command after running the xdp_hw_metadata app.
sudo hwstamp_ctl -i eth0 -t 1
To simplify the step test of xdp_hw_metadata, set tx_type to HWTSTAMP_TX_ON
to enable hardware timestamping for all outgoing packets, so that user no
longer need to execute hwstamp_ctl command.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241205051936.3156307-1-yoong.siang.song@intel.com
set XDP_UMEM_TX_METADATA_LEN flag to reserve tx_metadata_len bytes of
per-chunk metadata.
Fixes: d5e726d914 ("xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len")
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241205044258.3155799-1-yoong.siang.song@intel.com
Libelf functions do not set errno on failure. Instead, it relies on its
internal _elf_errno value, that can be retrieved via elf_errno (or the
corresponding message via elf_errmsg()). From "man libelf":
If a libelf function encounters an error it will set an internal
error code that can be retrieved with elf_errno. Each thread
maintains its own separate error code. The meaning of each error
code can be determined with elf_errmsg, which returns a string
describing the error.
As a consequence, libbpf should not return -errno when a function from
libelf fails, because an empty value will not be interpreted as an error
and won't prevent the program to stop. This is visible in
bpf_linker__add_file(), for example, where we call a succession of
functions that rely on libelf:
err = err ?: linker_load_obj_file(linker, filename, opts, &obj);
err = err ?: linker_append_sec_data(linker, &obj);
err = err ?: linker_append_elf_syms(linker, &obj);
err = err ?: linker_append_elf_relos(linker, &obj);
err = err ?: linker_append_btf(linker, &obj);
err = err ?: linker_append_btf_ext(linker, &obj);
If the object file that we try to process is not, in fact, a correct
object file, linker_load_obj_file() may fail with errno not being set,
and return 0. In this case we attempt to run linker_append_elf_sysms()
and may segfault.
This can happen (and was discovered) with bpftool:
$ bpftool gen object output.o sample_ret0.bpf.c
libbpf: failed to get ELF header for sample_ret0.bpf.c: invalid `Elf' handle
zsh: segmentation fault (core dumped) bpftool gen object output.o sample_ret0.bpf.c
Fix the issue by returning a non-null error code (-EINVAL) when libelf
functions fail.
Fixes: faf6ed321c ("libbpf: Add BPF static linker APIs")
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241205135942.65262-1-qmo@kernel.org
Sometimes it returns other than EOPNOTSUPP for invalid precise_ip so
it cannot check the error code. Let's move the fallback after the
missing feature checks so that it can handle EINVAL as well. This also
aligns well with the existing behavior which blindly turns off the
precise_ip but we check the missing features correctly now.
Fixes: af954f76ee ("perf tools: Check fallback error and order")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Closes: https://lore.kernel.org/oe-lkp/202411301431.799e5531-lkp@intel.com
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/Z1DV0lN8qHSysX7f@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
- Correct typos in comments
- Elaborate a comment about how the uAPI works for
IOMMU_HW_INFO_TYPE_ARM_SMMUV3
- Fix a double free on error path and add test coverage for the bug
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ1Hx1QAKCRCFwuHvBreF
YRA6AQCtirCoWoMgq1mSsFjtzmr5XCffS1g6T7KsKs54sDZZXAD/doa4NpE3LTPo
huOPMfH2O0HufLpj+FTzew4q0RbAJAc=
=z0Ak
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"One bug fix and some documentation updates:
- Correct typos in comments
- Elaborate a comment about how the uAPI works for
IOMMU_HW_INFO_TYPE_ARM_SMMUV3
- Fix a double free on error path and add test coverage for the bug"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu/arm-smmu-v3: Improve uAPI comment for IOMMU_HW_INFO_TYPE_ARM_SMMUV3
iommufd/selftest: Cover IOMMU_FAULT_QUEUE_ALLOC in iommufd_fail_nth
iommufd: Fix out_fput in iommufd_fault_alloc()
iommufd: Fix typos in kernel-doc comments
Essentially reverse the order of headers for userspace generated files.
Before (make -C tools/net/ynl/; cat tools/net/ynl/ethtool-user.h):
#include <linux/ethtool_netlink_generated.h>
#include <linux/ethtool.h>
#include <linux/ethtool.h>
#include <linux/ethtool.h>
After:
#include <linux/ethtool.h>
#include <linux/ethtool_netlink_generated.h>
While at it, make sure we track which headers we've already included
and include the headers only once.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241204155549.641348-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The intent is to generate ethtool uapi headers. For now, some of the
things are hard-coded:
- <FAMILY>_MSG_{USER,KERNEL}_MAX
- the split between USER and KERNEL messages
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241204155549.641348-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is similar to existing attr-cnt-name in the attributes
to allow changing the name of the 'count' enum entry.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241204155549.641348-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth: bnxt_en: support header page pool in queue API
- eth: ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth: mlxsw: use correct key block on Spectrum-4
- eth: mlx5: fix memory leak in mlx5hws_definer_calc_layout
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=nkPk
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth:
- bnxt_en: support header page pool in queue API
- ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
-----BEGIN PGP SIGNATURE-----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=9aQY
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- regression fix in suspend/resume for i2c-hid (Kenny Levinsen)
- fix wacom driver assuming a name can not be null (WangYuli)
- a couple of constify changes/fixes (Thomas Weißschuh)
- a couple of selftests/hid fixes (Maximilian Heyne & Benjamin
Tissoires)
* tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: fix kfunc inclusions with newer bpftool
HID: bpf: drop unneeded casts discarding const
HID: bpf: constify hid_ops
selftests: hid: fix typo and exit code
HID: wacom: fix when get product name maybe null pointer
HID: i2c-hid: Revert to using power commands to wake on resume
Replace setsockopt() calls with calls to functions that follow
setsockopt() with getsockopt() and check that the returned value and its
size are the same as have been set. (Except in vsock_perf.)
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Change parameters of SO_VM_SOCKETS_* to unsigned long long as documented
in the vm_sockets.h, because the corresponding kernel code requires them
to be at least 64-bit, no matter what architecture. Otherwise they are
too small on 32-bit machines.
Fixes: 5c338112e4 ("test/vsock: rework message bounds test")
Fixes: 685a21c314 ("test/vsock: add big message test")
Fixes: 542e893fba ("vsock/test: two tests to check credit update logic")
Fixes: 8abbffd27c ("test/vsock: vsock_perf utility")
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This happens on 64-bit big-endian machines.
SO_RCVLOWAT requires an int parameter. However, instead of int, the test
uses unsigned long in one place and size_t in another. Both are 8 bytes
long on 64-bit machines. The kernel, having received the 8 bytes, doesn't
test for the exact size of the parameter, it only cares that it's >=
sizeof(int), and casts the 4 lower-addressed bytes to an int, which, on
a big-endian machine, contains 0. 0 doesn't trigger an error, SO_RCVLOWAT
returns with success and the socket stays with the default SO_RCVLOWAT = 1,
which results in vsock_test failures, while vsock_perf doesn't even notice
that it's failed to change it.
Fixes: b1346338fb ("vsock_test: POLLIN + SO_RCVLOWAT test")
Fixes: 542e893fba ("vsock/test: two tests to check credit update logic")
Fixes: 8abbffd27c ("test/vsock: vsock_perf utility")
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, sendmmsg is implemented in udpgso_bench_tx.c,
but it is not called by any test script.
This patch adds a test for sendmmsg in udpgso_bench.sh.
This allows for basic API testing and benchmarking
comparisons with GSO.
Signed-off-by: Kenjiro Nakayama <nakayamakenjiro@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241203222843.26983-1-nakayamakenjiro@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It should only have generic flags in the array but the recent header
sync brought a new flags to fcntl.h and caused a build error. Let's
update the shell script to exclude flags specific to name_to_handle_at().
CC trace/beauty/fs_at_flags.o
In file included from trace/beauty/fs_at_flags.c:21:
tools/perf/trace/beauty/generated/fs_at_flags_array.c:13:30: error: initialized field overwritten [-Werror=override-init]
13 | [ilog2(0x002) + 1] = "HANDLE_CONNECTABLE",
| ^~~~~~~~~~~~~~~~~~~~
tools/perf/trace/beauty/generated/fs_at_flags_array.c:13:30: note: (near initialization for ‘fs_at_flags[2]’)
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241203035349.1901262-12-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
09d6775f50 riscv: Add support for userspace pointer masking
91e102e797 prctl: arch-agnostic prctl for shadow stack
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241203035349.1901262-11-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
aefff51e1c statmount: retrieve security mount options
2f4d4503e9 statmount: add flag to retrieve unescaped options
44010543fc fs: add the ability for statmount() to report the sb_source
ed9d95f691 fs: add the ability for statmount() to report the fs_subtype
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/mount.h include/uapi/linux/mount.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20241203035349.1901262-10-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
c374196b2b ("fs: name_to_handle_at() support for "explicit connectable" file handles")
95f567f81e ("fs: Simplify getattr interface function checking AT_GETATTR_NOSEC flag")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20241203035349.1901262-9-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
3630e82ab6 ("mman: Add map_shadow_stack() flags")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/mman.h include/uapi/asm-generic/mman.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arch@vger.kernel.org
Link: https://lore.kernel.org/r/20241203035349.1901262-8-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
6140be90ec ("fs/xattr: add *at family syscalls")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
diff -u tools/perf/arch/x86/entry/syscalls/syscall_32.tbl arch/x86/entry/syscalls/syscall_32.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
The arm64 changes are not included as it requires more changes in the
tools. It'll be worked for the later cycle.
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
CC: x86@kernel.org
CC: linux-mips@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-s390@vger.kernel.org
Link: https://lore.kernel.org/r/20241203035349.1901262-7-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
97413cea1c ("KVM: arm64: Add PSCI v1.3 SYSTEM_OFF2 function for hibernation")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: kvmarm@lists.linux.dev
Link: https://lore.kernel.org/r/20241203035349.1901262-6-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
a0423af92c ("x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest")
0c487010cb ("x86/cpufeatures: Add X86_FEATURE_AMD_WORKLOAD_CLASS feature bit")
1ad4667066 ("x86/cpufeatures: Add X86_FEATURE_AMD_HETEROGENEOUS_CORES")
104edc6efc ("x86/cpufeatures: Rename X86_FEATURE_FAST_CPPC to have AMD prefix")
3ea87dfa31 ("x86/cpufeatures: Add a IBPB_NO_RET BUG flag")
ff898623af ("x86/cpufeatures: Define X86_FEATURE_AMD_IBPB_RET")
dcb988cdac ("KVM: x86: Quirk initialization of feature MSRs to KVM's max configuration")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Link: https://lore.kernel.org/r/20241203035349.1901262-5-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
e785dfacf7 ("LoongArch: KVM: Add PCHPIC device support")
2e8b9df826 ("LoongArch: KVM: Add EIOINTC device support")
c532de5a67 ("LoongArch: KVM: Add IPI device support")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tianrui Zhao <zhaotianrui@loongson.cn>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: kvm@vger.kernel.org
Cc: loongarch@lists.linux.dev
Link: https://lore.kernel.org/r/20241203035349.1901262-4-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
18d92bb57c ("perf/core: Add aux_pause, aux_resume, aux_start_paused")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241203035349.1901262-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
56c594d8df ("drm: add DRM_SET_CLIENT_NAME ioctl")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/r/20241203035349.1901262-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
sizeof when applied to a pointer typed expression gives the size of
the pointer.
The proper fix in this particular case is to code sizeof(*cpuset)
instead of sizeof(cpuset).
This issue was detected with the help of Coccinelle.
Fixes: 22a920209a ("sched_ext: Implement tickless support")
Signed-off-by: guanjing <guanjing@cmss.chinamobile.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add a test case to verify that without CAP_PERFMON, the test now
succeeds instead of failing due to a verification error.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204044757.1483141-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure that when CAP_PERFMON is dropped, and the verifier sees
allow_ptr_leaks as false, we are not permitted to read from a
STACK_INVALID slot. Without the fix, the test will report unexpected
success in loading.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204044757.1483141-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a __caps_unpriv annotation so that tests requiring specific
capabilities while dropping the rest can conveniently specify them
during selftest declaration instead of munging with capabilities at
runtime from the testing binary.
While at it, let us convert test_verifier_mtu to use this new support
instead.
Since we do not want to include linux/capability.h, we only defined the
four main capabilities BPF subsystem deals with in bpf_misc.h for use in
tests. If the user passes a CAP_SYS_NICE or anything else that's not
defined in the header, capability parsing code will return a warning.
Also reject strtol returning 0. CAP_CHOWN = 0 but we'll never need to
use it, and strtol doesn't errno on failed conversion. Fail the test in
such a case.
The original diff for this idea is available at link [0].
[0]: https://lore.kernel.org/bpf/a1e48f5d9ae133e19adc6adf27e19d585e06bab4.camel@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
[ Kartikeya: rebase on bpf-next, add warn to parse_caps, convert test_verifier_mtu ]
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204044757.1483141-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit f803bcf920 ("selftests/bpf: Prevent client connect before
server bind in test_tc_tunnel.sh") added code that waits for the
netcat server to start before the netcat client attempts to connect to
it. However, not all calls to 'server_listen' were guarded.
This patch adds the existing 'wait_for_port' guard after the remaining
call to 'server_listen'.
Fixes: f803bcf920 ("selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh")
Signed-off-by: Marco Leogrande <leogrande@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241202204530.1143448-1-leogrande@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Include tests that check for rejection in erroneous cases, like
unbalanced IRQ-disabled counts, within and across subprogs, invalid IRQ
flag state or input to kfuncs, behavior upon overwriting IRQ saved state
on stack, interaction with sleepable kfuncs/helpers, global functions,
and out of order restore. Include some success scenarios as well to
demonstrate usage.
#128/1 irq/irq_save_bad_arg:OK
#128/2 irq/irq_restore_bad_arg:OK
#128/3 irq/irq_restore_missing_2:OK
#128/4 irq/irq_restore_missing_3:OK
#128/5 irq/irq_restore_missing_3_minus_2:OK
#128/6 irq/irq_restore_missing_1_subprog:OK
#128/7 irq/irq_restore_missing_2_subprog:OK
#128/8 irq/irq_restore_missing_3_subprog:OK
#128/9 irq/irq_restore_missing_3_minus_2_subprog:OK
#128/10 irq/irq_balance:OK
#128/11 irq/irq_balance_n:OK
#128/12 irq/irq_balance_subprog:OK
#128/13 irq/irq_global_subprog:OK
#128/14 irq/irq_restore_ooo:OK
#128/15 irq/irq_restore_ooo_3:OK
#128/16 irq/irq_restore_3_subprog:OK
#128/17 irq/irq_restore_4_subprog:OK
#128/18 irq/irq_restore_ooo_3_subprog:OK
#128/19 irq/irq_restore_invalid:OK
#128/20 irq/irq_save_invalid:OK
#128/21 irq/irq_restore_iter:OK
#128/22 irq/irq_save_iter:OK
#128/23 irq/irq_flag_overwrite:OK
#128/24 irq/irq_flag_overwrite_partial:OK
#128/25 irq/irq_ooo_refs_array:OK
#128/26 irq/irq_sleepable_helper:OK
#128/27 irq/irq_sleepable_kfunc:OK
#128 irq:OK
Summary: 1/27 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204030400.208005-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For preemption-related kfuncs, we don't test their interaction with
sleepable kfuncs (we do test helpers) even though the verifier has
code to protect against such a pattern. Expand coverage of the selftest
to include this case.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204030400.208005-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier log when leaking resources on BPF_EXIT may be a bit
confusing, as it's a problem only when finally existing from the main
prog, not from any of the subprogs. Hence, update the verifier error
string and the corresponding selftests matching on it.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204030400.208005-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Turbostat currently exits under the following conditions:
1. When running on non-Intel/AMD/Hygon x86 vendors.
2. When running on Intel models that lack specific platform features.
Introduce a new `--force` parameter that allows turbostat to run on
these unsupported platforms with minimal default feature support. This
provides users with the flexibility to gather basic information even on
unsupported systems.
[lenb: updated warning message text]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Improve the `--help` output of turbostat by standardizing the format
and enhancing readability. The following changes are made to ensure
consistency and clarity in the help message:
1. Use a consistent pattern for each parameter's help message:
- Display the parameter and its input (if any) on the same line,
separated by a space.
- Provide the detailed description on a separate line.
2. Ensure that the first character of each description is in lower-case.
These changes make the help output more uniform and easier to read,
helping users quickly understand the available options and their usage.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Turbostat currently supports x86 processors from Intel, AMD, and Hygon.
The behavior of turbostat on CPUs from other vendors has not been
evaluated and may lead to incorrect or undefined behavior.
Enhance turbostat to exit by default when running on an unsupported CPU
vendor. This ensures that users are aware that their CPU is not
currently supported by turbostat, guiding them to seek support for their
specific hardware through future patches.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Turbostat requires per-platform enabling for Intel CPU models due to
platform-specific features. When running on unsupported Intel CPU
models, turbostat currently operates with limited default features,
which can lead to users unknowingly using an outdated version of the
tool.
Enhance turbostat to exit by default when run on unsupported Intel CPU
models, with a clear message to users, informing them that their CPU
model is not supported and advising them to update to the latest version
of turbostat for full functionality.
[lenb: updated error message wording]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add initial support for ClearwaterForest.
It shares the same features with SierraForest.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add initial support for PantherLake.
It shares the same features with Lunarlake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Andrii spotted that process_dynptr_func's rejection of incorrect
argument register type will print an error string where argument numbers
are not zero-indexed, unlike elsewhere in the verifier. Fix this by
subtracting 1 from regno. The same scenario exists for iterator
messages. Fix selftest error strings that match on the exact argument
number while we're at it to ensure clean bisection.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241203002235.3776418-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests to cover argument type check for iterator kfuncs, and
cover all three kinds (new, next, destroy). Without the fix in the
previous patch, the selftest would not cause a verifier error.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241203000238.3602922-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, KF_ARG_PTR_TO_ITER handling missed checking the reg->type and
ensuring it is PTR_TO_STACK. Instead of enforcing this in the caller of
process_iter_arg, move the check into it instead so that all callers
will gain the check by default. This is similar to process_dynptr_func.
An existing selftest in verifier_bits_iter.c fails due to this change,
but it's because it was passing a NULL pointer into iter_next helper and
getting an error further down the checks, but probably meant to pass an
uninitialized iterator on the stack (as is done in the subsequent test
below it). We will gain coverage for non-PTR_TO_STACK arguments in later
patches hence just change the declaration to zero-ed stack object.
Fixes: 06accc8779 ("bpf: add support for open-coded iterator loops")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tao Lyu <tao.lyu@epfl.ch>
[ Kartikeya: move check into process_iter_arg, rewrite commit log ]
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241203000238.3602922-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This signal handler loops over all tests on ctrl-C, but it's active
while the test list is being constructed. process.pid is 0, then -1,
then finally set to the child pid on fork. If the Ctrl-C is received
during this point a kill(-1, SIGINT) can be sent which affects all
processes.
Make sure the child has forked first before forwarding the signal. This
can be reproduced with ctrl-C immediately after launching perf test
which terminates the ssh connection.
Fixes: 553d5efeb3 ("perf test: Add a signal handler to kill forked child processes")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241129151948.3199732-1-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The build-id events written at the end of the record session are broken
due to unexpected data. The write_buildid() writes the fixed length
event first and then variable length filename.
But a recent change made it write more data in the padding area
accidentally. So readers of the event see zero-filled data for the
next entry and treat it incorrectly. This resulted in wrong kernel
symbols because the kernel DSO loaded a random vmlinux image in the
path as it didn't have a valid build-id.
Fixes: ae39ba1655 ("perf inject: Fix build ID injection")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/Z0aRFFW9xMh3mqKB@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
serial_test_flow_dissector_namespace manipulates both the root net
namespace and a dedicated non-root net namespace. If for some reason a
program attach on root namespace succeeds while it was expected to
fail, the unexpected program will remain attached to the root namespace,
possibly affecting other runs or even other tests in the same run.
Fix undesired test failure side effect by explicitly detaching programs
on failing tests expecting attach to fail. As a side effect of this
change, do not test errno value if the tested operation do not fail.
Fixes: 284ed00a59dd ("selftests/bpf: migrate flow_dissector namespace exclusivity test")
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241128-small_flow_test_fix-v1-1-c12d45c98c59@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running `bpftool` on a kernel module installed in `/lib/modules...`,
this error is encountered if the user does not specify `--base-btf` to
point to a valid base BTF (e.g. usually in `/sys/kernel/btf/vmlinux`).
However, looking at the debug output to determine the cause of the error
simply says `Invalid BTF string section`, which does not point to the
actual source of the error. This just improves that debug message to tell
users what happened.
Signed-off-by: Ben Olson <matthew.olson@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/Z0YqzQ5lNz7obQG7@bolson-desk
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This verifies that programs of BPF_PROG_TYPE_CGROUP_SKB can access
skb->data_end with direct packet access when being run with
BPF_PROG_TEST_RUN.
Signed-off-by: Mahe Tardy <mahe.tardy@gmail.com>
Link: https://lore.kernel.org/r/20241125152603.375898-2-mahe.tardy@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
USDT ELF note optionally can record an offset of .stapsdt.base, which is
used to make adjustments to USDT target attach address. Currently,
libbpf will do this address adjustment unconditionally if it finds
.stapsdt.base ELF section in target binary. But there is a corner case
where .stapsdt.base ELF section is present, but specific USDT note
doesn't reference it. In such case, libbpf will basically just add base
address and end up with absolutely incorrect USDT target address.
This adjustment has to be done only if both .stapsdt.sema section is
present and USDT note is recording a reference to it.
Fixes: 74cc6311ce ("libbpf: Add USDT notes parsing and resolution logic")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20241121224558.796110-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that test_flow_dissector.sh has been converted to test_progs, remove
the legacy test.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-14-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_flow_dissector.sh loads flow_dissector program and subprograms,
creates and configured relevant tunnels and interfaces, and ensure that
the bpf dissection is actually performed correctly. Similar tests exist
in test_progs (thanks to flow_dissector.c) and run the same programs,
but those are only executed with BPF_PROG_RUN: those tests are then
missing some coverage (eg: coverage for flow keys manipulated when the
configured flower uses a port range, which has a dedicated test in
test_flow_dissector.sh)
Convert test_flow_dissector.sh into test_progs so that the corresponding
tests are also run in CI.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-13-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
network_helpers.c provides some helpers to generate ip checksums or ip
pseudo-header checksums, but not for upper layers (eg: udp checksums)
Add helpers for udp checksum to allow manually building udp packets.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-12-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Trying to add udp-dedicated helpers in network_helpers involves
including some udp header, which makes multiple test_progs tests build
fail:
In file included from ./progs/test_cls_redirect.h:13,
from [...]/prog_tests/cls_redirect.c:15:
[...]/usr/include/linux/udp.h:23:8: error: redefinition of ‘struct udphdr’
23 | struct udphdr {
| ^~~~~~
In file included from ./network_helpers.h:17,
from [...]/prog_tests/cls_redirect.c:13:
[...]/usr/include/netinet/udp.h:55:8: note: originally defined here
55 | struct udphdr
| ^~~~~~
This error is due to struct udphdr being defined in both <linux/udp.h>
and <netinet/udp.h>.
Use only <netinet/udp.h> in every test. While at it, perform the same
for tcp.h. For some tests, the change needs to be done in the eBPF
program part as well, because of some headers sharing between both
sides.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-11-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
network_helpers.h provides helpers to compute checksum for pseudo
headers but no helpers to compute the global checksums.
Before adding those, clarify csum_tcpudp_magic and csum_ipv6_magic
purpose by adding some documentation.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-10-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
xdp_metadata test has a small helper computing ipv4 checksums to allow
manually building packets.
Move this helper to network_helpers to share it with other tests.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-9-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Enable CONFIG_NET_ACT_GACT to allow adding simple actions with tc
filters. This is for example needed to migrate test_flow_dissector into
the automated testing performed in CI.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-8-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit a11c397c43 ("bpf/flow_dissector: add mode to enforce global BPF
flow dissector") is currently tested in test_flow_dissector.sh, which is
not part of test_progs. Add the corresponding test to flow_dissector.c,
which is part of test_progs. The new test reproduces the behavior
implemented in its shell script counterpart:
- attach a flow dissector program to the root net namespace, ensure
that we can not attach another flow dissector in any non-root net
namespace
- attach a flow dissector program to a non-root net namespace, ensure
that we can not attach another flow dissector in root namespace
Since the new test is performing operations in the root net namespace,
make sure to set it as a "serial" test to make sure not to conflict with
any other test.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-7-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_flow program is able to handle GRE headers in IP packets. Add a
few test data input simulating those GRE packets, with 2 different
cases:
- parse GRE and the encapsulated packet
- parse GRE only
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-6-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The flow_dissector test integrated in test_progs actually runs a wide
matrix of tests over different packets types and bpf programs modes, but
exposes only 3 main tests, preventing tests users from running specific
subtests with a specific input only.
Expose all subtests executed by flow_dissector by using
test__start_subtest().
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-5-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The flow_dissector runs plenty of tests over diffent kind of packets,
grouped into three categories: skb mode, non-skb mode with direct
attach, and non-skb with indirect attach.
Re-split the main function into dedicated tests. Each test now must have
its own setup/teardown, but for the advantage of being able to run them
separately. While at it, make sure that tests attaching the bpf programs
are run in a dedicated ns.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-4-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The flow dissector test currently relies on generic CHECK macros to
perform tests. Update those to newer, more-specific ASSERT macros.
This update allows to get rid of the global duration variable, which was
needed by the CHECK macros
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-3-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The flow_dissector program currently compares flow keys returned by bpf
program with the expected one thanks to a custom macro using memcmp.
Use the new ASSERT_MEMEQ macro to perform this comparision. This update
also allows to get rid of the unused bpf_test_run_opts variable in
run_tests_skb_less (it was only used by the CHECK macro for its duration
field)
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-2-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In preparation for adding support for annotated jump tables, where
ELF relocations and symbols are used to describe the locations of jump
tables in the executable, refactor the jump table discovery logic so the
table size can be returned from arch_find_switch_table().
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241011170847.334429-12-ardb+git@google.com
Currently REACHABLE is weird for being on the instruction after the
instruction it modifies.
Since all REACHABLE annotations have an explicit instruction, flip
them around.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20241128094312.494176035@infradead.org
There are no users of annotate_reachable() left.
And the annotate_unreachable() usage in unreachable() is plain wrong;
it will hide dangerous fall-through code-gen.
Remove both.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20241128094312.235637588@infradead.org
Reduce read_annotate() runs by collapsing subsequent runs into a
single call.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20241128094311.688871544@infradead.org
Avoid endless .discard.foo sections for each annotation, create a
single .discard.annotate_insn section that takes an annotation type along
with the instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20241128094310.932794537@infradead.org
Convert mm_lock_seq to be seqcount_t and change all mmap_write_lock
variants to increment it, in-line with the usual seqcount usage pattern.
This lets us check whether the mmap_lock is write-locked by checking
mm_lock_seq.sequence counter (odd=locked, even=unlocked). This will be
used when implementing mmap_lock speculation functions.
As a result vm_lock_seq is also change to be unsigned to match the type
of mm_lock_seq.sequence.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Link: https://lkml.kernel.org/r/20241122174416.1367052-2-surenb@google.com
Move the arm64 CRC-T10DIF assembly code into the lib directory and wire
it up to the library interface. This allows it to be used without going
through the crypto API. It remains usable via the crypto API too via
the shash algorithms that use the library interface. Thus all the
arch-specific "shash" code becomes unnecessary and is removed.
Note: to see the diff from arch/arm64/crypto/crct10dif-ce-glue.c to
arch/arm64/lib/crc-t10dif-glue.c, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241202012056.209768-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fixes.
RISC-V:
* Svade and Svadu (accessed and dirty bit) extension support for host and
guest. This was acked on the mailing list by the RISC-V maintainer, see
https://patchew.org/linux/20240726084931.28924-1-yongxuan.wang@sifive.com/.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmdKS0QUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP7hggAmt5CJesFGIuDwQgJX1KuNWAS84AX
Oq5SPZLH0XjE5YDm6AusSzvbtOhRM6mARU5/iqMRE6Mqpf4MXpP9tOo6xaDiL7+m
bOFsDYEO73WQyrIfFUCZ7dXiTbDVtQfNH8Z1yQwHPsa1d+WDYY3tLbCe5qCdqYMF
JDiB7K0cQzPDmhCwf3Zf8mW2ZRI0QsTqiuFUfVGGNgFDspWfBFBqkLCkrMNmbp9z
ye375oKb2VCe6OBJCY+Nl6tdoBUkz+CtZDCxkxuh0Uk4NmsUC9JMye9iwgU9DuI7
nagFuvpUGcgbZvrx1ly47TL+wcEFLwnBJ0xBZTGIgVoZHj/wX9GM+tSgIw==
=semZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
- ARM fixes
- RISC-V Svade and Svadu (accessed and dirty bit) extension support for
host and guest
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: riscv: selftests: Add Svade and Svadu Extension to get-reg-list test
RISC-V: KVM: Add Svade and Svadu Extensions Support for Guest/VM
dt-bindings: riscv: Add Svade and Svadu Entries
RISC-V: Add Svade and Svadu Extensions Support
KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters
KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status
KVM: arm64: Mark set_sysreg_masks() as inline to avoid build failure
KVM: arm64: vgic-its: Add stronger type-checking to the ITS entry sizes
KVM: arm64: vgic: Kill VGIC_MAX_PRIVATE definition
KVM: arm64: vgic: Make vgic_get_irq() more robust
KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR
Extend the rss_ctx test suite to test that an ntuple action that
redirects to an RSS context contains that information in `ethtool -n`.
Otherwise the output from ethtool is highly deceiving. This test helps
ensure drivers are compliant with the API.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://patch.msgid.link/759870e430b7c93ecaae6e448f30a47284c59637.1732748253.git.dxu@dxuuu.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
since 2024.07.26:
assorted minor bug fixes
assorted platform specific tweaks
initial RAPL PSYS (SysWatt) support
Signed-off-by: Len Brown <len.brown@intel.com>
Introduce the counter as a part of global, platform counters structure.
We open the counter for only one cpu, but otherwise treat it as an
ordinary RAPL counter, allowing for grouped perf read.
The counter is disabled by default, because it's interpretation may
require additional, platform specific information, making it unsuitable
for general use.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add '+' to optstring when early scanning for --no-msr and --no-perf.
It causes option processing to stop as soon as a nonoption argument is
encountered, effectively skipping child's arguments.
Fixes: 3e4048466c ("tools/power turbostat: Add --no-msr option")
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Force the --no-perf early to prevent using it as a source. User asks for
raw values, but perf returns them relative to the opening of the file
descriptor.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
On some machines, the graphics device is enumerated as
/sys/class/drm/card1 instead of /sys/class/drm/card0. The current
implementation does not handle this scenario, resulting in the loss of
graphics C6 residency and frequency information.
Add support for /sys/class/drm/card1, ensuring that turbostat can
retrieve and display the graphics columns for these platforms.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Snapshots of the graphics sysfs knobs are taken based on file
descriptors. To optimize this process, open the files and cache the file
descriptors during the graphics probe phase. As a result, the previously
cached pathnames become redundant and are removed.
This change aims to streamline the code without altering its functionality.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently, there is an inconsistency in how graphics sysfs knobs are
accessed: graphics residency sysfs knobs are opened and closed for each
read, while graphics frequency sysfs knobs are opened once and remain
open until turbostat exits. This inconsistency is confusing and adds
unnecessary code complexity.
Consolidate the access method by opening the sysfs files once and
reusing the file pointers for subsequent accesses. This approach
simplifies the code and ensures a consistent method for accessing
graphics sysfs knobs.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The graphics sysfs knobs are read-only, making the use of fflush()
before reading them redundant.
Remove the unnecessary fflush() call.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
In various generations, platforms often share a majority of features,
diverging only in a few specific aspects. The current approach of using
hardcoded values in 'platform_features' structure fails to effectively
represent these divergences.
To improve the description of platform divergence:
1. Each newly introduced 'platform_features' structure must have a base,
typically derived from the previous generation.
2. Platform feature values should be inherited from the base structure
rather than being hardcoded.
This approach ensures a more accurate and maintainable representation of
platform-specific features across different generations.
Converts `adl_features` and `lnl_features` to follow this new scheme.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add initial support for GraniteRapids-D. It shares the same features
with SapphireRapids.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Lunarlake supports CC1/CC6/CC7/PC2/PC6/PC10.
Remove PC3 support on Lunarlake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As ARL shares the same features with ADL/RPL/MTL, now 'arl_features' is
used by Lunarlake platform only.
Rename 'arl_features' to 'lnl_features'.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Similar to ADL/RPL/MTL, ARL supports CC1/CC6/CC7/PC2/PC3/PC6/PC8/PC10.
Add back PC8 support on Arrowlake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Similar to ADL/RPL, MTL support CC1/CC6/CC7/PC2/PC3/PC6/PC8/CP10.
Remove PC7/PC9 support on MTL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Honor --show CPU and --show Core when "topo.num_cpus == 1".
Previously turbostat assumed that on a 1-CPU system, these
columns should never appear.
Honoring these flags makes it easier for several programs
that parse turbostat output.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
parse_cpu_string() parses the string input either from command line or
from /sys/fs/cgroup/cpuset.cpus.effective to get a list of CPUs that
turbostat can run with.
The cpu string returned by /sys/fs/cgroup/cpuset.cpus.effective contains
a trailing '\n', but strtoul() fails to treat this as an error.
That says, for the code below
val = ("\n", NULL, 10);
val returns 0, and errno is also not set.
As a result, CPU0 is erroneously considered as allowed CPU and this
causes failures when turbostat tries to run on CPU0.
get_counters: Could not migrate to CPU 0
...
turbostat: re-initialized with num_cpus 8, allowed_cpus 5
get_counters: Could not migrate to CPU 0
Add a check to return immediately if '\n' or '\0' is detected.
Fixes: 8c3dd2c9e5 ("tools/power/turbostat: Abstrct function for parsing cpu string")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Intel hybrid platforms expose different perf devices for P and E cores.
Instead of one, "/sys/bus/event_source/devices/cpu" device, there are
"/sys/bus/event_source/devices/{cpu_core,cpu_atom}".
This, however makes it more complicated for the user,
because most of the counters are available on both and had to be
handled manually.
This patch allows users to use "virtual" cpu device that is seemingly
translated to cpu_core and cpu_atom perf devices, depending on the type
of a CPU we are opening the counter for.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
If the very first printed column was for a PMT counter of type xtal_time
we would misalign the column header, because we were always printing the
delimiter.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix build regression seen when using old gcc-9 compiler.
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
-----BEGIN PGP SIGNATURE-----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=GDKD
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
* tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits)
kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms
gitignore: Don't ignore 'tags' directory
kbuild: add dependency from vmlinux to resolve_btfids
modpost: replace tdb_hash() with hash_str()
kbuild: deb-pkg: add python3:native to build dependency
genksyms: reduce indentation in export_symbol()
modpost: improve error messages in device_id_check()
modpost: rename alias symbol for MODULE_DEVICE_TABLE()
modpost: rename variables in handle_moddevtable()
modpost: move strstarts() to modpost.h
modpost: convert do_usb_table() to a generic handler
modpost: convert do_of_table() to a generic handler
modpost: convert do_pnp_device_entry() to a generic handler
modpost: convert do_pnp_card_entries() to a generic handler
modpost: call module_alias_printf() from all do_*_entry() functions
modpost: pass (struct module *) to do_*_entry() functions
modpost: remove DEF_FIELD_ADDR_VAR() macro
modpost: deduplicate MODULE_ALIAS() for all drivers
modpost: introduce module_alias_printf() helper
modpost: remove unnecessary check in do_acpi_entry()
...
A collection of small fixes. Majority of changes are device-specific
fixes and quirks, while there are a few core fixes to address
regressions and corner cases spotted by fuzzers.
- Fix of spinlock range that wrongly covered kvfree() call in rawmidi
- Fix potential NULL dereference at PCM mmap
- Fix incorrectly advertised MIDI 2.0 UMP Function Block info
- Various ASoC AMD quirks and fixes
- ASoC SOF Intel, Mediatek, HDMI-codec fixes
- A few more quirks and TAS2781 codec fix for HD-audio
- A couple of fixes for USB-audio for malicious USB descriptors
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmdIeZUOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE9YNQ/+IHvY0LmY+7Xd1ZGWtf+Sucsn8FXcE5K654q5
RQwMbNNniSjXf8zyGfd05y/hVLWinaxYpM2m8DdGhIe/Fk2FYnU4itsChjv7TKW4
blqYoer1HHMUaXF03uiJGfBxadNtKS/y+b2RagNkirPDO9cpTnc8ITKmJkqeFc/I
flxCoGdKGew2OybZnFjVbEvTP1rhO1kODI3wkgr85ru8zMcLYC/FSbs7prEnZ7LO
gy88Km7/SVcAYIHgSFjSdRHuz0ZRdCekIObP94QuxTbJ1/7Js2pDX/JFtHOMUqgG
p7GGaDofT6u6Ut+fUCqLC8D3f1uift+O+vn98+5KvnABO4z9sdhNBXabGE0vv/4U
tw9jllXI97ylK0o6HSVIwYsRb5IOhjlxOO+rlAZDE6Y0ii2uhCCp0vVFr4xVQOh1
NeRqq1f4+TDxJSADzCUE/h1Hi9zepoK4GUQLasxGVCSxuIyiG8EW8U2/QZxhRSKP
pYigpAIGbFHEzYEF+J+PXrfxgCEycv6jMq/RgkKbdbBiIYmnN6Q5lbSLpnDhTwjd
qG0dBVX2KywHBlQm0nT2tKmyhoZu4c0gt0FnMWo9RAjyZON6YDXypc4KXon5a1kL
kkgcDYQTccn4Klzvk1a3A+8Piz6B9UbJJ0fNjZiL0cp+awLQHg1GV+4bLp/iLQhm
EivYr/U=
=FLBb
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. Majority of changes are device-specific
fixes and quirks, while there are a few core fixes to address
regressions and corner cases spotted by fuzzers.
- Fix of spinlock range that wrongly covered kvfree() call in rawmidi
- Fix potential NULL dereference at PCM mmap
- Fix incorrectly advertised MIDI 2.0 UMP Function Block info
- Various ASoC AMD quirks and fixes
- ASoC SOF Intel, Mediatek, HDMI-codec fixes
- A few more quirks and TAS2781 codec fix for HD-audio
- A couple of fixes for USB-audio for malicious USB descriptors"
* tag 'sound-fix-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda: improve bass speaker support for ASUS Zenbook UM5606WA
ALSA: hda/realtek: Apply quirk for Medion E15433
ASoC: amd: yc: Add a quirk for microfone on Lenovo ThinkPad P14s Gen 5 21MES00B00
ASoC: SOF: ipc3-topology: Convert the topology pin index to ALH dai index
ASoC: mediatek: Check num_codecs is not zero to avoid panic during probe
ASoC: amd: yc: Fix for enabling DMIC on acp6x via _DSD entry
ALSA: ump: Fix evaluation of MIDI 1.0 FB info
ALSA: core: Fix possible NULL dereference caused by kunit_kzalloc()
ALSA: hda: Show the codec quirk info at probing
ALSA: asihpi: Remove unused variable
ALSA: hda/realtek: Set PCBeep to default value for ALC274
ALSA: hda/tas2781: Add speaker id check for ASUS projects
ALSA: hda/realtek: Update ALC225 depop procedure
ALSA: hda/realtek: Enable speaker pins for Medion E15443 platform
ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook X G1i
ALSA: usb-audio: Fix out of bounds reads when finding clock sources
ALSA: rawmidi: Fix kvfree() call in spinlock
ALSA: hda/realtek: Fix Internal Speaker and Mic boost of Infinix Y4 Max
ASoC: amd: yc: Add quirk for microphone on Lenovo Thinkpad T14s Gen 6 21M1CTO1WW
ASoC: doc: dapm: Add location information for dapm-graph tool
...
Here is the "big and hairy" char/misc/iio and other small driver
subsystem updates for 6.13-rc1. Sorry for doing this at the end of the
merge window, conference and holiday travel got in the way on my side
(hence the 5am pull request emails...)
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible. I think this is the tipping point,
expect to see way more rust drivers going forward now that these
bindings are present. Next merge window hopefully we will have pci
and platform drivers working, which will fully enable almost all
driver subsystems to start accepting (or at least getting) rust
drivers. This is the end result of a lot of work from a lot of
people, congrats to all of them for getting this far, you've proved
many of us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
Note, there is a semi-hairy rust merge conflict when pulling this. The
resolution has been in linux-next for a while and can be seen here:
https://lore.kernel.org/all/20241111173459.2646d4af@canb.auug.org.au/
All of these have been in linux-next for a while, with no other reported
issues other than that merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lGpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKHQCgvI4Muu2tpdINBVe24Zc8S3ozg0AAnRNg3F7r
ikneftUDYtuviSGU/Rs8
=CW+i
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
This consists of 3 fixes, the main one build that we build the kallsyms
test modules all over again if we just run make twice.
-----BEGIN PGP SIGNATURE-----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=3s2l
-----END PGP SIGNATURE-----
Merge tag 'modules-6.13-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules fixes from Luis Chamberlain:
"Three fixes, the main one build that we build the kallsyms test
modules all over again if we just run make twice"
* tag 'modules-6.13-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
selftests: find_symbol: Actually use load_mod() parameter
selftests: kallsyms: fix and clarify current test boundaries
selftests: kallsyms: fix double build stupidity
There are a number of tools (bpftool, selftests), that require a
"bootstrap" build. Here, a bootstrap build is a build host variant of
a target. E.g., assume that you're performing a bpftool cross-build on
x86 to riscv, a bootstrap build would then be an x86 variant of
bpftool. The typical way to perform the host build variant, is to pass
"ARCH=" in a sub-make. However, if a variable has been set with a
command argument, then ordinary assignments in the makefile are
ignored.
This side-effect results in that ARCH, and variables depending on ARCH
are not set. Workaround by overriding ARCH to the host arch, if ARCH
is empty.
Fixes: 8859b0da5a ("tools/bpftool: Fix cross-build")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Quentin Monnet <qmo@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20241127101748.165693-1-bjorn@kernel.org
bpftool now embeds the kfuncs definitions directly in the generated
vmlinux.h
This is great, but because the selftests dir might be compiled with
HID_BPF disabled, we have no guarantees to be able to compile the
sources with the generated kfuncs.
If we have the kfuncs, because we have the `__not_used` hack, the newly
defined kfuncs do not match the ones from vmlinux.h and things go wrong.
Prevent vmlinux.h to define its kfuncs and also add the missing `__weak`
symbols for our custom kfuncs definitions
Link: https://patch.msgid.link/20241128-fix-new-bpftool-v1-1-c9abdf94a719@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The parameter passed to load_mod() is stored in $MOD, but never used.
Obviously it was intended to be used instead of the hardcoded
"test_kallsyms_b" module name.
Fixes: 84b4a51fce ("selftests: add new kallsyms selftests")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The correct exit code to mark a test as skipped is 4.
Fixes: ffb85d5c9e ("selftests: hid: import hid-tools hid-core tests")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Link: https://patch.msgid.link/20241126135850.76493-1-mheyne@amazon.de
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
* Support for pointer masking in userspace,
* Support for probing vector misaligned access performance.
* Support for qspinlock on systems with Zacas and Zabha.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmdHNu4THHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiZW7D/oCjSIdBHZ6OJN8vATRn2FoHedMgKzE
8OF0EXX85+PNmznxzyUirPerfQPcog5422vCKLUR5h8QD0x3wdMH8gUaV0Wa11k8
ldXlV903k7gJLtJMnww2Eiha7kds5XpNWsWBTU0sBAxt2mMUE2VlloBY5YM/fitJ
3TUihA7vyic5J0H3H4VrkuEoFnN4Xl9WclbwCYFg0uKmiogqXCe5LKey5/JjLpDR
2DdFe/7PRjQMuUNVrNO4Vm+/YD1nwRdg5ukvIl42KINHWKyn1hl23cKsFobrilw5
GyMbTzP4hBhy3kpX+zjWPpvTyoHSww7iJK6AvkvgQk/gua8M6abLJheachY/Ciz1
lJy4okB8H2LtZwMYlJiIXBQzKE1qCwNA1/m24y8SUYQXvjxwGZxaPXAyWvvqBxOP
/q/jQYfCiQi/h7BncMv9F8cxkU3J8cglzmxTKlM5Rf5YKdOzMyf4t0sm2pPsFX2l
V4xjZQNMDJ1IHGnRbeMTOqHN6iKymyj8BKph5kATO5W9gq4tWXRSEIPfuGJMq2jq
T64RweOdHlBPhiXu4hMmRXgT2rNBfTuaqEsVgXAZWkPmqum9uDPjBBiJ89bQO6pk
dJl7jVJ27HKSd4zLwnxSGCsVahirF4CCtULRam08500Gfz6dEarD7shZznd86cEg
QiBXqK5W6IWyJw==
=ND+J
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-v updates from Palmer Dabbelt:
- Support for pointer masking in userspace
- Support for probing vector misaligned access performance
- Support for qspinlock on systems with Zacas and Zabha
* tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
RISC-V: Remove unnecessary include from compat.h
riscv: Fix default misaligned access trap
riscv: Add qspinlock support
dt-bindings: riscv: Add Ziccrse ISA extension description
riscv: Add ISA extension parsing for Ziccrse
asm-generic: ticket-lock: Add separate ticket-lock.h
asm-generic: ticket-lock: Reuse arch_spinlock_t of qspinlock
riscv: Implement xchg8/16() using Zabha
riscv: Implement arch_cmpxchg128() using Zacas
riscv: Improve zacas fully-ordered cmpxchg()
riscv: Implement cmpxchg8/16() using Zabha
dt-bindings: riscv: Add Zabha ISA extension description
riscv: Implement cmpxchg32/64() using Zacas
riscv: Do not fail to build on byte/halfword operations with Zawrs
riscv: Move cpufeature.h macros into their own header
KVM: riscv: selftests: Add Smnpm and Ssnpm to get-reg-list test
RISC-V: KVM: Allow Smnpm and Ssnpm extensions for guests
riscv: hwprobe: Export the Supm ISA extension
riscv: selftests: Add a pointer masking test
riscv: Allow ptrace control of the tagged address ABI
...
Highlights for this merge window:
* The whole caching of module code into huge pages by Mike Rapoport is going
in through Andrew Morton's tree due to some other code dependencies. That's
really the biggest highlight for Linux kernel modules in this release. With
it we share huge pages for modules, starting off with x86. Expect to see that
soon through Andrew!
* Helge Deller addressed some lingering low hanging fruit alignment
enhancements by. It is worth pointing out that from his old patch series
I dropped his vmlinux.lds.h change at Masahiro's request as he would
prefer this to be specified in asm code [0].
[0] https://lore.kernel.org/all/20240129192644.3359978-5-mcgrof@kernel.org/T/#m9efef5e700fbecd28b7afb462c15eed8ba78ef5a
* Matthew Maurer and Sami Tolvanen have been tag teaming to help
get us closer to a modversions for Rust. In this cycle we take in
quite a lot of the refactoring for ELF validation. I expect modversions
for Rust will be merged by v6.14 as that code is mostly ready now.
* Adds a new modules selftests: kallsyms which helps us tests find_symbol()
and the limits of kallsyms on Linux today.
* We have a realtime mailing list to kernel-ci testing for modules now
which relies and combines patchwork, kpd and kdevops:
- https://patchwork.kernel.org/project/linux-modules/list/
- https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/README.md
- https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/kernel-ci-kpd.md
- https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/linux-modules-kdevops-ci.md
If you want to help avoid Linux kernel modules regressions, now its simple,
just add a new Linux modules sefltests under tools/testing/selftests/module/
That is it. All new selftests will be used and leveraged automatically by
the CI.
-----BEGIN PGP SIGNATURE-----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=Ny84
-----END PGP SIGNATURE-----
Merge tag 'modules-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Luis Chamberlain:
- The whole caching of module code into huge pages by Mike Rapoport is
going in through Andrew Morton's tree due to some other code
dependencies. That's really the biggest highlight for Linux kernel
modules in this release. With it we share huge pages for modules,
starting off with x86. Expect to see that soon through Andrew!
- Helge Deller addressed some lingering low hanging fruit alignment
enhancements by. It is worth pointing out that from his old patch
series I dropped his vmlinux.lds.h change at Masahiro's request as he
would prefer this to be specified in asm code [0].
[0] https://lore.kernel.org/all/20240129192644.3359978-5-mcgrof@kernel.org/T/#m9efef5e700fbecd28b7afb462c15eed8ba78ef5a
- Matthew Maurer and Sami Tolvanen have been tag teaming to help get us
closer to a modversions for Rust. In this cycle we take in quite a
lot of the refactoring for ELF validation. I expect modversions for
Rust will be merged by v6.14 as that code is mostly ready now.
- Adds a new modules selftests: kallsyms which helps us tests
find_symbol() and the limits of kallsyms on Linux today.
- We have a realtime mailing list to kernel-ci testing for modules now
which relies and combines patchwork, kpd and kdevops:
https://patchwork.kernel.org/project/linux-modules/list/https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/README.mdhttps://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/kernel-ci-kpd.mdhttps://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/linux-modules-kdevops-ci.md
If you want to help avoid Linux kernel modules regressions, now its
simple, just add a new Linux modules sefltests under
tools/testing/selftests/module/ That is it. All new selftests will be
used and leveraged automatically by the CI.
* tag 'modules-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
tests/module/gen_test_kallsyms.sh: use 0 value for variables
scripts: Remove export_report.pl
selftests: kallsyms: add MODULE_DESCRIPTION
selftests: add new kallsyms selftests
module: Reformat struct for code style
module: Additional validation in elf_validity_cache_strtab
module: Factor out elf_validity_cache_strtab
module: Group section index calculations together
module: Factor out elf_validity_cache_index_str
module: Factor out elf_validity_cache_index_sym
module: Factor out elf_validity_cache_index_mod
module: Factor out elf_validity_cache_index_info
module: Factor out elf_validity_cache_secstrings
module: Factor out elf_validity_cache_sechdrs
module: Factor out elf_validity_ehdr
module: Take const arg in validate_section_offset
modules: Add missing entry for __ex_table
modules: Ensure 64-bit alignment on __ksymtab_* sections
- Svade and Svadu extension support for Host and Guest/VM
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmc/KesACgkQrUjsVaLH
LAcuuQ/9Gv8qezVw5TiV3BiusRns50PVIVZA12lrLLXrjiUzuo0zbIRTozeZbTzb
0HMuS8isfgNkRmj35ZXQ1nzeckf3GN3j0f/TYeAVDUCj5sARimcRzSL+k9KC62aW
NxvmHsq+y4jlCr7V4viy9pkHrj2oNO4m6HhiAtgXfATXWYRtKOTkEKVYIPg3c77D
U7FeUEA1ege6xKK5U+v2gpIZHOXv13RaXQqmZ3j+JfDyzIhakYSKE/mRslX3z4ch
9SKSUt2PqustyT5qdmM1jt9+q6k1QQw2fWWnxJb6AGsmDfwkEEvPKuok74TUDVPa
V4mnesTIf8wPjzw4n5XSqf5i+67WuNjBBtxMWhWGmcfpLbC9y0gE+lTaRZrXU7fL
66VXVDK7YhTsWCJ9sJfRXnGAOtHcIp20lQwemdRYCSMRbD8I6OWwfBbXfo3pUo85
8mCZtstySXAyr2pnfX44kuav70D46qWyiTm0o4WSVeCExtny0qslJLmKoYgjsB+T
7eJCrpxcmsTXBMYST6AXiAg5GUVj4DoCzMDT2DcsGoa2DM1RLc8qlwSrsD4jdSdF
Jc8HSOc54mSUvaE31LWwd1YJiQ20Nh8kfv5nmO7m9LB6ADiZOL1yL7tTsSxrMWSg
l0lgJbjTRYTPVghXR/kkAD7jXEthWAFJ5knv5CT2bb6Qx7uWPpk=
=juLq
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.13-2' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.13 part #2
- Svade and Svadu extension support for Host and Guest/VM
* Support for pointer masking in userspace,
* Support for probing vector misaligned access performance.
* Support for qspinlock on systems with Zacas and Zabha.
-----BEGIN PGP SIGNATURE-----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=ND+J
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into HEAD
RISC-V Paches for the 6.13 Merge Window, Part 1
* Support for pointer masking in userspace,
* Support for probing vector misaligned access performance.
* Support for qspinlock on systems with Zacas and Zabha.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ0YDhQAKCRCRxhvAZXjc
ouy/AQDds2VXT3baRn5mvLOnWaN9tez+TnPLUKbS8m4srJUrGgD/SQkYc14vANGL
iIw6oAhDhdzrjrm0rxr2COXah6me7g0=
=Xu0X
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a few iomap bugs
- Fix a wrong argument in backing file callback
- Fix security mount option retrieval in statmount()
- Cleanup how statmount() handles unescaped options
- Add a missing inode_owner_or_capable() check for setting write hints
- Clear the return value in read_kcore_iter() after a successful
iov_iter_zero()
- Fix a mount_setattr() selftest
- Fix function signature in mount api documentation
- Remove duplicate include header in the fscache code
* tag 'vfs-6.13-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/backing_file: fix wrong argument in callback
fs_parser: update mount_api doc to match function signature
fs: require inode_owner_or_capable for F_SET_RW_HINT
fs/proc/kcore.c: Clear ret value in read_kcore_iter after successful iov_iter_zero
statmount: fix security option retrieval
statmount: clean up unescaped option handling
fscache: Remove duplicate included header
iomap: elide flush from partial eof zero range
iomap: lift zeroed mapping handling into iomap_zero_range()
iomap: reset per-iter state on non-error iter advances
iomap: warn on zero range of a post-eof folio
selftests/mount_setattr: Fix failures on 64K PAGE_SIZE kernels
-----BEGIN PGP SIGNATURE-----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=2Otz
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
Add the build support for using Clang's Propeller optimizer. Like
AutoFDO, Propeller uses hardware sampling to gather information
about the frequency of execution of different code paths within a
binary. This information is then used to guide the compiler's
optimization decisions, resulting in a more efficient binary.
The support requires a Clang compiler LLVM 19 or later, and the
create_llvm_prof tool
(https://github.com/google/autofdo/releases/tag/v0.30.1). This
commit is limited to x86 platforms that support PMU features
like LBR on Intel machines and AMD Zen3 BRS.
Here is an example workflow for building an AutoFDO+Propeller
optimized kernel:
1) Build the kernel on the host machine, with AutoFDO and Propeller
build config
CONFIG_AUTOFDO_CLANG=y
CONFIG_PROPELLER_CLANG=y
then
$ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile>
“<autofdo_profile>” is the profile collected when doing a non-Propeller
AutoFDO build. This step builds a kernel that has the same optimization
level as AutoFDO, plus a metadata section that records basic block
information. This kernel image runs as fast as an AutoFDO optimized
kernel.
2) Install the kernel on test/production machines.
3) Run the load tests. The '-c' option in perf specifies the sample
event period. We suggest using a suitable prime number,
like 500009, for this purpose.
For Intel platforms:
$ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \
-o <perf_file> -- <loadtest>
For AMD platforms:
The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2
# To see if Zen3 support LBR:
$ cat proc/cpuinfo | grep " brs"
# To see if Zen4 support LBR:
$ cat proc/cpuinfo | grep amd_lbr_v2
# If the result is yes, then collect the profile using:
$ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \
-N -b -c <count> -o <perf_file> -- <loadtest>
4) (Optional) Download the raw perf file to the host machine.
5) Generate Propeller profile:
$ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \
--format=propeller --propeller_output_module_name \
--out=<propeller_profile_prefix>_cc_profile.txt \
--propeller_symorder=<propeller_profile_prefix>_ld_profile.txt
“create_llvm_prof” is the profile conversion tool, and a prebuilt
binary for linux can be found on
https://github.com/google/autofdo/releases/tag/v0.30.1 (can also build
from source).
"<propeller_profile_prefix>" can be something like
"/home/user/dir/any_string".
This command generates a pair of Propeller profiles:
"<propeller_profile_prefix>_cc_profile.txt" and
"<propeller_profile_prefix>_ld_profile.txt".
6) Rebuild the kernel using the AutoFDO and Propeller profile files.
CONFIG_AUTOFDO_CLANG=y
CONFIG_PROPELLER_CLANG=y
and
$ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> \
CLANG_PROPELLER_PROFILE_PREFIX=<propeller_profile_prefix>
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
perf record
-----------
* Enable leader sampling for inherited task events. It was supported
only for system-wide events but the kernel started to support such a
setup since v6.12.
This is to reduce the number of PMU interrupts. The samples of the
leader event will contain counts of other events and no samples will
be generated for the other member events.
$ perf record -e '{cycles,instructions}:S' ${MYPROG}
perf report
-----------
* Fix --branch-history option to display more branch-related information
like prediction, abort and cycles which is available on Intel machines.
$ perf record -bg -- perf test -w brstack
$ perf report --branch-history
...
#
# Overhead Source:Line Symbol Shared Object Predicted Abort Cycles IPC [IPC Coverage]
# ........ ........................ .............. .................... ......... ..... ...... ....................
#
8.17% copy_page_64.S:19 [k] copy_page [kernel.kallsyms] 50.0% 0 5 - -
|
---xas_load xarray.h:171
|
|--5.68%--xas_load xarray.c:245 (cycles:1)
| xas_load xarray.c:242
| xas_load xarray.h:1260 (cycles:1)
| xas_descend xarray.c:146
| xas_load xarray.c:244 (cycles:2)
| xas_load xarray.c:245
| xas_descend xarray.c:218 (cycles:10)
...
perf stat
---------
* Add HWMON PMU support. The HWMON provides various system information
like CPU/GPU temperature, fan speed and so on. Expose them as PMU
events so that users can see the values using perf stat commands.
$ perf stat -e temp_cpu,fan1 true
Performance counter stats for 'true':
60.00 'C temp_cpu
0 rpm fan1
0.000745382 seconds time elapsed
0.000883000 seconds user
0.000000000 seconds sys
* Display metric threshold in JSON output. Some metrics define
thresholds to classify value ranges. It used to be in a different
color but it won't work for JSON. Add "metric-threshold" field to
the JSON that can be one of "good", "less good", "nearly bad" and
"bad".
# perf stat -a -M TopdownL1 -j true
{"counter-value" : "18693525.000000", "unit" : "", "event" : "TOPDOWN.SLOTS", "event-runtime" : 5552708, "pcnt-running" : 100.00, "metric-value" : "43.226002", "metric-unit" : "% tma_backend_bound", "metric-threshold" : "bad"}
{"metric-value" : "29.212267", "metric-unit" : "% tma_frontend_bound", "metric-threshold" : "bad"}
{"metric-value" : "7.138972", "metric-unit" : "% tma_bad_speculation", "metric-threshold" : "good"}
{"metric-value" : "20.422759", "metric-unit" : "% tma_retiring", "metric-threshold" : "good"}
{"counter-value" : "3817732.000000", "unit" : "", "event" : "topdown-retiring", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "5472824.000000", "unit" : "", "event" : "topdown-fe-bound", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "7984780.000000", "unit" : "", "event" : "topdown-be-bound", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "1418181.000000", "unit" : "", "event" : "topdown-bad-spec", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
...
perf sched
----------
* Add -P/--pre-migrations option for 'timehist' sub-command to track
time a task waited on a run-queue before migrating to a different CPU.
$ perf sched timehist -P
time cpu task name wait time sch delay run time pre-mig time
[tid/pid] (msec) (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- --------- ---------
585940.535527 [0000] perf[584885] 0.000 0.000 0.000 0.000
585940.535535 [0000] migration/0[20] 0.000 0.002 0.008 0.000
585940.535559 [0001] perf[584885] 0.000 0.000 0.000 0.000
585940.535563 [0001] migration/1[25] 0.000 0.001 0.004 0.000
585940.535678 [0002] perf[584885] 0.000 0.000 0.000 0.000
585940.535686 [0002] migration/2[31] 0.000 0.002 0.008 0.000
585940.535905 [0001] <idle> 0.000 0.000 0.342 0.000
585940.535938 [0003] perf[584885] 0.000 0.000 0.000 0.000
585940.537048 [0001] sleep[584886] 0.000 0.019 1.142 0.001
585940.537749 [0002] <idle> 0.000 0.000 2.062 0.000
...
Build
-----
* Make libunwind opt-in (LIBUNWIND=1) rather than opt-out. The perf
tools are generally built with libelf and libdw which has unwinder
functionality. The libunwind support predates it and no need to
have duplicate unwinders by default.
* Rename NO_DWARF=1 build option to NO_LIBDW=1 in order to clarify it's
using libdw for handling DWARF information.
Internals
---------
* Do not set exclude_guest bit in the perf_event_attr by default. This
was causing a trouble in AMD IBS PMU as it doesn't support the bit.
The bit will be set when it's needed later by the fallback logic.
Also update the missing feature detection logic to make sure not clear
supported bits unnecessarily.
* Run perf test in parallel by default and mark flaky tests "exclusive"
to run them serially at the end. Some test numbers are changed but
the test can complete in less than half the time.
JSON vendor events
------------------
* Add AMD Zen 5 events and metrics.
* Add i.MX91 and i.MX95 DDR metrics
* Fix HiSilicon HIP08 Topdown metric name.
* Support compat events on PowerPC.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZ0Qi3gAKCRCMstVUGiXM
g6NIAP49eoSmQF40u55sJN0J7RpYd+bTgXZkahv0IUCBX98TLwEA2NrK0oUcB84C
xeanq28/3JxNM/oBpsEvvB8mb/0lGwI=
=FAVF
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.13-2024-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"perf record:
- Enable leader sampling for inherited task events. It was supported
only for system-wide events but the kernel started to support such
a setup since v6.12.
This is to reduce the number of PMU interrupts. The samples of the
leader event will contain counts of other events and no samples
will be generated for the other member events.
$ perf record -e '{cycles,instructions}:S' ${MYPROG}
perf report:
- Fix --branch-history option to display more branch-related
information like prediction, abort and cycles which is available
on Intel machines.
$ perf record -bg -- perf test -w brstack
$ perf report --branch-history
...
#
# Overhead Source:Line Symbol Shared Object Predicted Abort Cycles IPC [IPC Coverage]
# ........ ........................ .............. .................... ......... ..... ...... ....................
#
8.17% copy_page_64.S:19 [k] copy_page [kernel.kallsyms] 50.0% 0 5 - -
|
---xas_load xarray.h:171
|
|--5.68%--xas_load xarray.c:245 (cycles:1)
| xas_load xarray.c:242
| xas_load xarray.h:1260 (cycles:1)
| xas_descend xarray.c:146
| xas_load xarray.c:244 (cycles:2)
| xas_load xarray.c:245
| xas_descend xarray.c:218 (cycles:10)
...
perf stat:
- Add HWMON PMU support.
The HWMON provides various system information like CPU/GPU
temperature, fan speed and so on. Expose them as PMU events so that
users can see the values using perf stat commands.
$ perf stat -e temp_cpu,fan1 true
Performance counter stats for 'true':
60.00 'C temp_cpu
0 rpm fan1
0.000745382 seconds time elapsed
0.000883000 seconds user
0.000000000 seconds sys
- Display metric threshold in JSON output.
Some metrics define thresholds to classify value ranges. It used to
be in a different color but it won't work for JSON.
Add "metric-threshold" field to the JSON that can be one of "good",
"less good", "nearly bad" and "bad".
# perf stat -a -M TopdownL1 -j true
{"counter-value" : "18693525.000000", "unit" : "", "event" : "TOPDOWN.SLOTS", "event-runtime" : 5552708, "pcnt-running" : 100.00, "metric-value" : "43.226002", "metric-unit" : "% tma_backend_bound", "metric-threshold" : "bad"}
{"metric-value" : "29.212267", "metric-unit" : "% tma_frontend_bound", "metric-threshold" : "bad"}
{"metric-value" : "7.138972", "metric-unit" : "% tma_bad_speculation", "metric-threshold" : "good"}
{"metric-value" : "20.422759", "metric-unit" : "% tma_retiring", "metric-threshold" : "good"}
{"counter-value" : "3817732.000000", "unit" : "", "event" : "topdown-retiring", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "5472824.000000", "unit" : "", "event" : "topdown-fe-bound", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "7984780.000000", "unit" : "", "event" : "topdown-be-bound", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "1418181.000000", "unit" : "", "event" : "topdown-bad-spec", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
...
perf sched:
- Add -P/--pre-migrations option for 'timehist' sub-command to track
time a task waited on a run-queue before migrating to a different
CPU.
$ perf sched timehist -P
time cpu task name wait time sch delay run time pre-mig time
[tid/pid] (msec) (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- --------- ---------
585940.535527 [0000] perf[584885] 0.000 0.000 0.000 0.000
585940.535535 [0000] migration/0[20] 0.000 0.002 0.008 0.000
585940.535559 [0001] perf[584885] 0.000 0.000 0.000 0.000
585940.535563 [0001] migration/1[25] 0.000 0.001 0.004 0.000
585940.535678 [0002] perf[584885] 0.000 0.000 0.000 0.000
585940.535686 [0002] migration/2[31] 0.000 0.002 0.008 0.000
585940.535905 [0001] <idle> 0.000 0.000 0.342 0.000
585940.535938 [0003] perf[584885] 0.000 0.000 0.000 0.000
585940.537048 [0001] sleep[584886] 0.000 0.019 1.142 0.001
585940.537749 [0002] <idle> 0.000 0.000 2.062 0.000
...
Build:
- Make libunwind opt-in (LIBUNWIND=1) rather than opt-out.
The perf tools are generally built with libelf and libdw which has
unwinder functionality. The libunwind support predates it and no
need to have duplicate unwinders by default.
- Rename NO_DWARF=1 build option to NO_LIBDW=1 in order to clarify
it's using libdw for handling DWARF information.
Internals:
- Do not set exclude_guest bit in the perf_event_attr by default.
This was causing a trouble in AMD IBS PMU as it doesn't support the
bit. The bit will be set when it's needed later by the fallback
logic. Also update the missing feature detection logic to make sure
not clear supported bits unnecessarily.
- Run perf test in parallel by default and mark flaky tests
"exclusive" to run them serially at the end. Some test numbers are
changed but the test can complete in less than half the time.
JSON vendor events:
- Add AMD Zen 5 events and metrics.
- Add i.MX91 and i.MX95 DDR metrics
- Fix HiSilicon HIP08 Topdown metric name.
- Support compat events on PowerPC"
* tag 'perf-tools-for-v6.13-2024-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (232 commits)
perf tests: Fix hwmon parsing with PMU name test
perf hwmon_pmu: Ensure hwmon key union is zeroed before use
perf tests hwmon_pmu: Remove double evlist__delete()
perf/test: fix perf ftrace test on s390
perf bpf-filter: Return -ENOMEM directly when pfi allocation fails
perf test: Correct hwmon test PMU detection
perf: Remove unused del_perf_probe_events()
perf pmu: Move pmu_metrics_table__find and remove ARM override
perf jevents: Add map_for_cpu()
perf header: Pass a perf_cpu rather than a PMU to get_cpuid_str
perf header: Avoid transitive PMU includes
perf arm64 header: Use cpu argument in get_cpuid
perf header: Refactor get_cpuid to take a CPU for ARM
perf header: Move is_cpu_online to numa bench
perf jevents: fix breakage when do perf stat on system metric
perf test: Add missing __exit calls in tool/hwmon tests
perf tests: Make leader sampling test work without branch event
perf util: Remove kernel version deadcode
perf test shell trace_exit_race: Use --no-comm to avoid cases where COMM isn't resolved
perf test shell trace_exit_race: Show what went wrong in verbose mode
...
Jeff Layton contributed a scalability improvement to NFSD's NFSv4
backchannel session implementation. This improvement is intended to
increase the rate at which NFSD can safely recall NFSv4 delegations
from clients, to avoid the need to revoke them. Revoking requires
a slow state recovery process.
A wide variety of bug fixes and other incremental improvements make
up the bulk of commits in this series. As always I am grateful to
the NFSD contributors, reviewers, testers, and bug reporters who
participated during this cycle.
-----BEGIN PGP SIGNATURE-----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=wBvS
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Jeff Layton contributed a scalability improvement to NFSD's NFSv4
backchannel session implementation. This improvement is intended to
increase the rate at which NFSD can safely recall NFSv4 delegations
from clients, to avoid the need to revoke them. Revoking requires a
slow state recovery process.
A wide variety of bug fixes and other incremental improvements make up
the bulk of commits in this series. As always I am grateful to the
NFSD contributors, reviewers, testers, and bug reporters who
participated during this cycle"
* tag 'nfsd-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (72 commits)
nfsd: allow for up to 32 callback session slots
nfs_common: must not hold RCU while calling nfsd_file_put_local
nfsd: get rid of include ../internal.h
nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur
NFSD: Add nfsd4_copy time-to-live
NFSD: Add a laundromat reaper for async copy state
NFSD: Block DESTROY_CLIENTID only when there are ongoing async COPY operations
NFSD: Handle an NFS4ERR_DELAY response to CB_OFFLOAD
NFSD: Free async copy information in nfsd4_cb_offload_release()
NFSD: Fix nfsd4_shutdown_copy()
NFSD: Add a tracepoint to record canceled async COPY operations
nfsd: make nfsd4_session->se_flags a bool
nfsd: remove nfsd4_session->se_bchannel
nfsd: make use of warning provided by refcount_t
nfsd: Don't fail OP_SETCLIENTID when there are too many clients.
svcrdma: fix miss destroy percpu_counter in svc_rdma_proc_init()
xdrgen: Remove program_stat_to_errno() call sites
xdrgen: Update the files included in client-side source code
xdrgen: Remove check for "nfs_ok" in C templates
xdrgen: Remove tracepoint call site
...
Add this to more comprehensively test the socket memory accounting logic
in the __SK_REDIRECT and __SK_DROP cases of tcp_bpf_sendmsg. We don't have
test when apply_bytes are not zero in test_txmsg_redir_wait_sndmem.
test_send_large has opt->rate=2, it will invoke sendmsg two times.
Specifically, the first sendmsg will trigger the case where the ret value
of tcp_bpf_sendmsg_redir is less than 0; while the second sendmsg happens
after the 3 seconds timeout, and it will trigger __SK_DROP because socket
c2 has been removed from the sockmap/hash.
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241016234838.3167769-2-zijianzhang@bytedance.com
Bring in an overlayfs fix for v6.13-rc1 that fixes a bug introduced by
the overlayfs changes merged for v6.13.
Signed-off-by: Christian Brauner <brauner@kernel.org>
CONFIG_PREEMPT is a preemtion model the so called "Low-Latency Desktop".
A different preemption model is PREEMPT_RT the so called "Real-Time".
Both implement preemption in kernel and set CONFIG_PREEMPTION.
There is also the so called "LAZY PREEMPT" which the "Scheduler
controlled preemption model". Here we have also preemption in the kernel
the rules are slightly different.
Therefore the testsuite should not check for CONFIG_PREEMPT (as one
model) but for CONFIG_PREEMPTION to figure out if preemption in the
kernel is possible.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20241119161819.qvEcs-n_@linutronix.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test to check the temporary address could be added/removed
correctly when mngtempaddr is set or removed/unmanaged.
Signed-off-by: Sam Edwards <cfsworks@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
