Kernel/linux-next
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git synced 2025-01-09 07:23:14 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
1,235,660 Commits 7 Branches 922 Tags 3.7 GiB
2905844f68
Commit Graph

519 Commits

Author SHA1 Message Date
Binbin Zhou
2905844f68 LoongArch: dts: DeviceTree for Loongson-2K2000 
Add DeviceTree file for Loongson-2K2000 processor, which integrates two
64-bit 3-issue superscalar LA364 processor cores.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-01-17 12:43:08 +08:00
Binbin Zhou
30a5532a32 LoongArch: dts: DeviceTree for Loongson-2K1000 
Add DeviceTree file for Loongson-2K1000 processor, which integrates two
64-bit 2-issue superscalar LA264 processor cores.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-01-17 12:43:08 +08:00
Binbin Zhou
0f66569c85 LoongArch: dts: DeviceTree for Loongson-2K0500 
Add DeviceTree file for Loongson-2K0500 processor, which integrates one
64-bit 2-issue superscalar LA264 processor core.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-01-17 12:43:07 +08:00
Binbin Zhou
5f346a6e59 LoongArch: Allow device trees be built into the kernel 
During the upstream progress of those DT-based drivers, DT properties
are changed a lot so very different from those in existing bootloaders.
It is inevitably that some existing systems do not provide a standard,
canonical device tree to the kernel at boot time. So let's provide a
device tree table in the kernel, keyed by the dts filename, containing
the relevant DTBs.

We can use the built-in dts files as references. Each SoC has only one
built-in dts file which describes all possible device information of
that SoC, so the dts files are good examples during development.

And as a reference, our built-in dts file only enables the most basic
bootable combinations (so it is generic enough), acts as an alternative
in case the dts in the bootloader is unexpected.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-01-17 12:43:00 +08:00
WANG Rui
90868ff9ca LoongArch: Enable initial Rust support 
Enable initial Rust support for LoongArch.

Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-01-17 12:43:00 +08:00
Linus Torvalds
a62aa88ba1 17 hotfixes. 8 are cc:stable and the other 9 pertain to post-6.6 issues. 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZXxs8wAKCRDdBJ7gKXxA
 junbAQCdItfHHinkWziciOrb0387wW+5WZ1ohqRFW8pGYLuasQEArpKmw13bvX7z
 e+ec9K1Ek9MlIsO2RwORR4KHH4MAbwA=
 =YpZh
 -----END PGP SIGNATURE-----

Merge tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "17 hotfixes. 8 are cc:stable and the other 9 pertain to post-6.6
  issues"

* tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/mglru: reclaim offlined memcgs harder
  mm/mglru: respect min_ttl_ms with memcgs
  mm/mglru: try to stop at high watermarks
  mm/mglru: fix underprotected page cache
  mm/shmem: fix race in shmem_undo_range w/THP
  Revert "selftests: error out if kernel header files are not yet built"
  crash_core: fix the check for whether crashkernel is from high memory
  x86, kexec: fix the wrong ifdeffery CONFIG_KEXEC
  sh, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC
  mips, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC
  m68k, kexec: fix the incorrect ifdeffery and build dependency of CONFIG_KEXEC
  loongarch, kexec: change dependency of object files
  mm/damon/core: make damon_start() waits until kdamond_fn() starts
  selftests/mm: cow: print ksft header before printing anything else
  mm: fix VMA heap bounds checking
  riscv: fix VMALLOC_START definition
  kexec: drop dependency on ARCH_SUPPORTS_KEXEC from CRASH_DUMP
 2023-12-15 12:00:54 -08:00
Linus Torvalds
af2a9c6a83 EFI fixes for v6.7 #2 
- Deal with a regression in the recently refactored x86 EFI stub code on
   older Dell systems by disabling randomization of the physical load
   address
 - Use the correct load address for relocatable Loongarch kernels
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZXgvLAAKCRAwbglWLn0t
 XLgKAP9oKLP7v0TD2BJOPGqr4kEtMfZYayV2EUN387VbPYfT0wEAoeDeZmaGUYce
 BuovToERSgjj2FylAWNlZATEh2d35ww=
 =kv9E
 -----END PGP SIGNATURE-----

Merge tag 'efi-urgent-for-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:

 - Deal with a regression in the recently refactored x86 EFI stub code
   on older Dell systems by disabling randomization of the physical load
   address

 - Use the correct load address for relocatable Loongarch kernels

* tag 'efi-urgent-for-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/x86: Avoid physical KASLR on older Dell systems
  efi/loongarch: Use load address to calculate kernel entry address
 2023-12-13 10:54:50 -08:00
Baoquan He
655fc6cd45 loongarch, kexec: change dependency of object files 
Patch series "kexec: fix the incorrect ifdeffery and dependency of
CONFIG_KEXEC".

The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config items are
set:

===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===

E.g on mips, below link error are seen:
--------------------------------------------------------------------
mipsel-linux-ld: kernel/kexec_core.o: in function `kimage_free':
kernel/kexec_core.c:(.text+0x2200): undefined reference to `machine_kexec_cleanup'
mipsel-linux-ld: kernel/kexec_core.o: in function `__crash_kexec':
kernel/kexec_core.c:(.text+0x2480): undefined reference to `machine_crash_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x2488): undefined reference to `machine_kexec'
mipsel-linux-ld: kernel/kexec_core.o: in function `kernel_kexec':
kernel/kexec_core.c:(.text+0x29b8): undefined reference to `machine_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x29c0): undefined reference to `machine_kexec'
--------------------------------------------------------------------

Here, change the incorrect dependency of building kexec_core related
object files, and the ifdeffery on architectures from CONFIG_KEXEC to
CONFIG_KEXEC_CORE.

Testing:
========
Passed on mips and loognarch with the LKP reproducer.


This patch (of 5):

Currently, in arch/loongarch/kernel/Makefile, building machine_kexec.o
relocate_kernel.o depends on CONFIG_KEXEC.

Whereas, since we will drop the select of KEXEC for CRASH_DUMP in
kernel/Kconfig.kexec, compiling error will be triggered if below config
items are set:

===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===

---------------------------------------------------------------
loongarch64-linux-ld: kernel/kexec_core.o: in function `.L209':
>> kexec_core.c:(.text+0x1660): undefined reference to `machine_kexec_cleanup'
   loongarch64-linux-ld: kernel/kexec_core.o: in function `.L287':
>> kexec_core.c:(.text+0x1c5c): undefined reference to `machine_crash_shutdown'
>> loongarch64-linux-ld: kexec_core.c:(.text+0x1c64): undefined reference to `machine_kexec'
   loongarch64-linux-ld: kernel/kexec_core.o: in function `.L2^B5':
>> kexec_core.c:(.text+0x2090): undefined reference to `machine_shutdown'
   loongarch64-linux-ld: kexec_core.c:(.text+0x20a0): undefined reference to `machine_kexec'
---------------------------------------------------------------

Here, change the dependency of machine_kexec.o relocate_kernel.o to
CONFIG_KEXEC_CORE can fix above building error.

Link: https://lkml.kernel.org/r/20231208073036.7884-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20231208073036.7884-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311300946.kHE9Iu71-lkp@intel.com/
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2023-12-12 17:20:17 -08:00
Wang Yao
271f2a4a95 efi/loongarch: Use load address to calculate kernel entry address 
The efi_relocate_kernel() may load the PIE kernel to anywhere, the
loaded address may not be equal to link address or
EFI_KIMG_PREFERRED_ADDRESS.

Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Wang Yao <wangyao@lemote.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
 2023-12-11 11:18:26 +01:00
Tiezhu Yang
e2f7b3d8b4 LoongArch: BPF: Fix unconditional bswap instructions 
We can see that "bswap32: Takes an unsigned 32-bit number in either big-
or little-endian format and returns the equivalent number with the same
bit width but opposite endianness" in BPF Instruction Set Specification,
so it should clear the upper 32 bits in "case 32:" for both BPF_ALU and
BPF_ALU64.

[root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable
[root@linux fedora]# modprobe test_bpf

Before:
test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times)
test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times)

After:
test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 4 PASS
test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 4 PASS

Fixes: 4ebf9216e7 ("LoongArch: BPF: Support unconditional bswap instructions")
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-12-09 15:49:16 +08:00
Tiezhu Yang
772cbe948f LoongArch: BPF: Fix sign-extension mov instructions 
We can see that "Short form of movsx, dst_reg = (s8,s16,s32)src_reg" in
include/linux/filter.h, additionally, for BPF_ALU64 the value of the
destination register is unchanged whereas for BPF_ALU the upper 32 bits
of the destination register are zeroed, so it should clear the upper 32
bits for BPF_ALU.

[root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable
[root@linux fedora]# modprobe test_bpf

Before:
test_bpf: #81 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)
test_bpf: #82 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)

After:
test_bpf: #81 ALU_MOVSX | BPF_B jited:1 6 PASS
test_bpf: #82 ALU_MOVSX | BPF_H jited:1 6 PASS

By the way, the bpf selftest case "./test_progs -t verifier_movsx" can
also be fixed with this patch.

Fixes: f48012f161 ("LoongArch: BPF: Support sign-extension mov instructions")
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-12-09 15:49:16 +08:00
Hengqi Chen
5d47ec2e6f LoongArch: BPF: Don't sign extend function return value 
The `cls_redirect` test triggers a kernel panic like:

  # ./test_progs -t cls_redirect
  Can't find bpf_testmod.ko kernel module: -2
  WARNING! Selftests relying on bpf_testmod.ko will be skipped.
  [   30.938489] CPU 3 Unable to handle kernel paging request at virtual address fffffffffd814de0, era == ffff800002009fb8, ra == ffff800002009f9c
  [   30.939331] Oops[#1]:
  [   30.939513] CPU: 3 PID: 1260 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6
  [   30.939732] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
  [   30.939901] pc ffff800002009fb8 ra ffff800002009f9c tp 9000000104da4000 sp 9000000104da7ab0
  [   30.940038] a0 fffffffffd814de0 a1 9000000104da7a68 a2 0000000000000000 a3 9000000104da7c10
  [   30.940183] a4 9000000104da7c14 a5 0000000000000002 a6 0000000000000021 a7 00005555904d7f90
  [   30.940321] t0 0000000000000110 t1 0000000000000000 t2 fffffffffd814de0 t3 0004c4b400000000
  [   30.940456] t4 ffffffffffffffff t5 00000000c3f63600 t6 0000000000000000 t7 0000000000000000
  [   30.940590] t8 000000000006d803 u0 0000000000000020 s9 9000000104da7b10 s0 900000010504c200
  [   30.940727] s1 fffffffffd814de0 s2 900000010504c200 s3 9000000104da7c10 s4 9000000104da7ad0
  [   30.940866] s5 0000000000000000 s6 90000000030e65bc s7 9000000104da7b44 s8 90000000044f6fc0
  [   30.941015]    ra: ffff800002009f9c bpf_prog_846803e5ae81417f_cls_redirect+0xa0/0x590
  [   30.941535]   ERA: ffff800002009fb8 bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590
  [   30.941696]  CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
  [   30.942224]  PRMD: 00000004 (PPLV0 +PIE -PWE)
  [   30.942330]  EUEN: 00000003 (+FPE +SXE -ASXE -BTE)
  [   30.942453]  ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
  [   30.942612] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
  [   30.942764]  BADV: fffffffffd814de0
  [   30.942854]  PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
  [   30.942974] Modules linked in:
  [   30.943078] Process test_progs (pid: 1260, threadinfo=00000000ce303226, task=000000007d10bb76)
  [   30.943306] Stack : 900000010a064000 90000000044f6fc0 9000000104da7b48 0000000000000000
  [   30.943495]         0000000000000000 9000000104da7c14 9000000104da7c10 900000010504c200
  [   30.943626]         0000000000000001 ffff80001b88c000 9000000104da7b70 90000000030e6668
  [   30.943785]         0000000000000000 9000000104da7b58 ffff80001b88c048 9000000003d05000
  [   30.943936]         900000000303ac88 0000000000000000 0000000000000000 9000000104da7b70
  [   30.944091]         0000000000000000 0000000000000001 0000000731eeab00 0000000000000000
  [   30.944245]         ffff80001b88c000 0000000000000000 0000000000000000 54b99959429f83b8
  [   30.944402]         ffff80001b88c000 90000000044f6fc0 9000000101d70000 ffff80001b88c000
  [   30.944538]         000000000000005a 900000010504c200 900000010a064000 900000010a067000
  [   30.944697]         9000000104da7d88 0000000000000000 9000000003d05000 90000000030e794c
  [   30.944852]         ...
  [   30.944924] Call Trace:
  [   30.945120] [<ffff800002009fb8>] bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590
  [   30.945650] [<90000000030e6668>] bpf_test_run+0x1ec/0x2f8
  [   30.945958] [<90000000030e794c>] bpf_prog_test_run_skb+0x31c/0x684
  [   30.946065] [<90000000026d4f68>] __sys_bpf+0x678/0x2724
  [   30.946159] [<90000000026d7288>] sys_bpf+0x20/0x2c
  [   30.946253] [<90000000032dd224>] do_syscall+0x7c/0x94
  [   30.946343] [<9000000002541c5c>] handle_syscall+0xbc/0x158
  [   30.946492]
  [   30.946549] Code: 0015030e  5c0009c0  5001d000 <28c00304> 02c00484  29c00304  00150009  2a42d2e4  0280200d
  [   30.946793]
  [   30.946971] ---[ end trace 0000000000000000 ]---
  [   32.093225] Kernel panic - not syncing: Fatal exception in interrupt
  [   32.093526] Kernel relocated by 0x2320000
  [   32.093630]  .text @ 0x9000000002520000
  [   32.093725]  .data @ 0x9000000003400000
  [   32.093792]  .bss  @ 0x9000000004413200
  [   34.971998] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

This is because we signed-extend function return values. When subprog
mode is enabled, we have:

  cls_redirect()
    -> get_global_metrics() returns pcpu ptr 0xfffffefffc00b480

The pointer returned is later signed-extended to 0xfffffffffc00b480 at
`BPF_JMP | BPF_EXIT`. During BPF prog run, this triggers unhandled page
fault and a kernel panic.

Drop the unnecessary signed-extension on return values like other
architectures do.

With this change, we have:

  # ./test_progs -t cls_redirect
  Can't find bpf_testmod.ko kernel module: -2
  WARNING! Selftests relying on bpf_testmod.ko will be skipped.
  #51/1    cls_redirect/cls_redirect_inlined:OK
  #51/2    cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK
  #51/3    cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK
  #51/4    cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK
  #51/5    cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK
  #51/6    cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK
  #51/7    cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK
  #51/8    cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK
  #51/9    cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK
  #51/10   cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK
  #51/11   cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK
  #51/12   cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK
  #51/13   cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK
  #51/14   cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK
  #51/15   cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK
  #51/16   cls_redirect/cls_redirect_subprogs:OK
  #51/17   cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK
  #51/18   cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK
  #51/19   cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK
  #51/20   cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK
  #51/21   cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK
  #51/22   cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK
  #51/23   cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK
  #51/24   cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK
  #51/25   cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK
  #51/26   cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK
  #51/27   cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK
  #51/28   cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK
  #51/29   cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK
  #51/30   cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK
  #51/31   cls_redirect/cls_redirect_dynptr:OK
  #51/32   cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK
  #51/33   cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK
  #51/34   cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK
  #51/35   cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK
  #51/36   cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK
  #51/37   cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK
  #51/38   cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK
  #51/39   cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK
  #51/40   cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK
  #51/41   cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK
  #51/42   cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK
  #51/43   cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK
  #51/44   cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK
  #51/45   cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK
  #51      cls_redirect:OK
  Summary: 1/45 PASSED, 0 SKIPPED, 0 FAILED

Fixes: 5dc615520c ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-12-09 15:49:16 +08:00
Hengqi Chen
fe5757553b LoongArch: BPF: Don't sign extend memory load operand 
The `cgrp_local_storage` test triggers a kernel panic like:

  # ./test_progs -t cgrp_local_storage
  Can't find bpf_testmod.ko kernel module: -2
  WARNING! Selftests relying on bpf_testmod.ko will be skipped.
  [  550.930632] CPU 1 Unable to handle kernel paging request at virtual address 0000000000000080, era == ffff80000200be34, ra == ffff80000200be00
  [  550.931781] Oops[#1]:
  [  550.931966] CPU: 1 PID: 1303 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6
  [  550.932215] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
  [  550.932403] pc ffff80000200be34 ra ffff80000200be00 tp 9000000108350000 sp 9000000108353dc0
  [  550.932545] a0 0000000000000000 a1 0000000000000517 a2 0000000000000118 a3 00007ffffbb15558
  [  550.932682] a4 00007ffffbb15620 a5 90000001004e7700 a6 0000000000000021 a7 0000000000000118
  [  550.932824] t0 ffff80000200bdc0 t1 0000000000000517 t2 0000000000000517 t3 00007ffff1c06ee0
  [  550.932961] t4 0000555578ae04d0 t5 fffffffffffffff8 t6 0000000000000004 t7 0000000000000020
  [  550.933097] t8 0000000000000040 u0 00000000000007b8 s9 9000000108353e00 s0 90000001004e7700
  [  550.933241] s1 9000000004005000 s2 0000000000000001 s3 0000000000000000 s4 0000555555eb2ec8
  [  550.933379] s5 00007ffffbb15bb8 s6 00007ffff1dafd60 s7 000055555663f610 s8 00007ffff1db0050
  [  550.933520]    ra: ffff80000200be00 bpf_prog_98f1b9e767be2a84_on_enter+0x40/0x200
  [  550.933911]   ERA: ffff80000200be34 bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200
  [  550.934105]  CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
  [  550.934596]  PRMD: 00000004 (PPLV0 +PIE -PWE)
  [  550.934712]  EUEN: 00000003 (+FPE +SXE -ASXE -BTE)
  [  550.934836]  ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
  [  550.934976] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
  [  550.935097]  BADV: 0000000000000080
  [  550.935181]  PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
  [  550.935291] Modules linked in:
  [  550.935391] Process test_progs (pid: 1303, threadinfo=000000006c3b1c41, task=0000000061f84a55)
  [  550.935643] Stack : 00007ffffbb15bb8 0000555555eb2ec8 0000000000000000 0000000000000001
  [  550.935844]         9000000004005000 ffff80001b864000 00007ffffbb15450 90000000029aa034
  [  550.935990]         0000000000000000 9000000108353ec0 0000000000000118 d07d9dfb09721a09
  [  550.936175]         0000000000000001 0000000000000000 9000000108353ec0 0000000000000118
  [  550.936314]         9000000101d46ad0 900000000290abf0 000055555663f610 0000000000000000
  [  550.936479]         0000000000000003 9000000108353ec0 00007ffffbb15450 90000000029d7288
  [  550.936635]         00007ffff1dafd60 000055555663f610 0000000000000000 0000000000000003
  [  550.936779]         9000000108353ec0 90000000035dd1f0 00007ffff1dafd58 9000000002841c5c
  [  550.936939]         0000000000000119 0000555555eea5a8 00007ffff1d78780 00007ffffbb153e0
  [  550.937083]         ffffffffffffffda 00007ffffbb15518 0000000000000040 00007ffffbb15558
  [  550.937224]         ...
  [  550.937299] Call Trace:
  [  550.937521] [<ffff80000200be34>] bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200
  [  550.937910] [<90000000029aa034>] bpf_trace_run2+0x90/0x154
  [  550.938105] [<900000000290abf0>] syscall_trace_enter.isra.0+0x1cc/0x200
  [  550.938224] [<90000000035dd1f0>] do_syscall+0x48/0x94
  [  550.938319] [<9000000002841c5c>] handle_syscall+0xbc/0x158
  [  550.938477]
  [  550.938607] Code: 580009ae  50016000  262402e4 <28c20085> 14092084  03a00084  16000024  03240084  00150006
  [  550.938851]
  [  550.939021] ---[ end trace 0000000000000000 ]---

Further investigation shows that this panic is triggered by memory
load operations:

  ptr = bpf_cgrp_storage_get(&map_a, task->cgroups->dfl_cgrp, 0,
                             BPF_LOCAL_STORAGE_GET_F_CREATE);

The expression `task->cgroups->dfl_cgrp` involves two memory load.
Since the field offset fits in imm12 or imm14, we use ldd or ldptrd
instructions. But both instructions have the side effect that it will
signed-extended the imm operand. Finally, we got the wrong addresses
and panics is inevitable.

Use a generic ldxd instruction to avoid this kind of issues.

With this change, we have:

  # ./test_progs -t cgrp_local_storage
  Can't find bpf_testmod.ko kernel module: -2
  WARNING! Selftests relying on bpf_testmod.ko will be skipped.
  test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
  #48/1    cgrp_local_storage/tp_btf:OK
  test_attach_cgroup:PASS:skel_open 0 nsec
  test_attach_cgroup:PASS:prog_attach 0 nsec
  test_attach_cgroup:PASS:prog_attach 0 nsec
  libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22
  test_attach_cgroup:FAIL:prog_attach unexpected error: -524
  #48/2    cgrp_local_storage/attach_cgroup:FAIL
  test_recursion:PASS:skel_open_and_load 0 nsec
  libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'on_lookup': failed to auto-attach: -524
  test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524)
  #48/3    cgrp_local_storage/recursion:FAIL
  #48/4    cgrp_local_storage/negative:OK
  #48/5    cgrp_local_storage/cgroup_iter_sleepable:OK
  test_yes_rcu_lock:PASS:skel_open 0 nsec
  test_yes_rcu_lock:PASS:skel_load 0 nsec
  libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524
  test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524)
  #48/6    cgrp_local_storage/yes_rcu_lock:FAIL
  #48/7    cgrp_local_storage/no_rcu_lock:OK
  #48      cgrp_local_storage:FAIL

  All error logs:
  test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
  test_attach_cgroup:PASS:skel_open 0 nsec
  test_attach_cgroup:PASS:prog_attach 0 nsec
  test_attach_cgroup:PASS:prog_attach 0 nsec
  libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22
  test_attach_cgroup:FAIL:prog_attach unexpected error: -524
  #48/2    cgrp_local_storage/attach_cgroup:FAIL
  test_recursion:PASS:skel_open_and_load 0 nsec
  libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'on_lookup': failed to auto-attach: -524
  test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524)
  #48/3    cgrp_local_storage/recursion:FAIL
  test_yes_rcu_lock:PASS:skel_open 0 nsec
  test_yes_rcu_lock:PASS:skel_load 0 nsec
  libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524
  test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524)
  #48/6    cgrp_local_storage/yes_rcu_lock:FAIL
  #48      cgrp_local_storage:FAIL
  Summary: 0/4 PASSED, 0 SKIPPED, 1 FAILED

No panics any more (The test still failed because lack of BPF trampoline
which I am actively working on).

Fixes: 5dc615520c ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-12-09 15:49:16 +08:00
Hengqi Chen
d6c5f06e46 LoongArch: Preserve syscall nr across execve() 
Currently, we store syscall nr in pt_regs::regs[11] and syscall execve()
accidentally overrides it during its execution:

    sys_execve()
      -> do_execve()
        -> do_execveat_common()
          -> bprm_execve()
            -> exec_binprm()
              -> search_binary_handler()
                -> load_elf_binary()
                  -> ELF_PLAT_INIT()

ELF_PLAT_INIT() reset regs[11] to 0, so in syscall_exit_to_user_mode()
we later get a wrong syscall nr. This breaks tools like execsnoop since
it relies on execve() tracepoints.

Skip pt_regs::regs[11] reset in ELF_PLAT_INIT() to fix the issue.

Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-12-09 15:49:15 +08:00
Jinyang He
97ceddbc94 LoongArch: Set unwind stack type to unknown rather than set error flag 
During unwinding, unwind_done() is used as an end condition. Normally it
unwind to the user stack and then set the stack type to unknown, which
is a normal exit. When something unexpected happens in unwind process
and we cannot unwind anymore, we should set the error flag, and also set
the stack type to unknown to indicate that the unwind process can not
continue. The error flag emphasizes that the unwind process produce an
unexpected error. There is no unexpected things when we unwind the PT_REGS
in the top of IRQ stack and find out that is an user mode PT_REGS. Thus,
we should not set error flag and just set stack type to unknown.

Reported-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-12-09 15:49:15 +08:00
Xi Ruoyao
8146c5b349 LoongArch: Slightly clean up drdtime() 
As we are just discarding the stable clock ID, simply write it into
$zero instead of allocating a temporary register.

Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-12-09 15:49:15 +08:00
WANG Rui
eea673e9d5 LoongArch: Apply dynamic relocations for LLD 
For the following assembly code:

     .text
     .global func
 func:
     nop

     .data
 var:
     .dword func

When linked with `-pie`, GNU LD populates the `var` variable with the
pre-relocated value of `func`. However, LLVM LLD does not exhibit the
same behavior. This issue also arises with the `kernel_entry` in arch/
loongarch/kernel/head.S:

 _head:
     .word   MZ_MAGIC                /* "MZ", MS-DOS header */
     .org    0x8
     .dword  kernel_entry            /* Kernel entry point */

The correct kernel entry from the MS-DOS header is crucial for jumping
to vmlinux from zboot. This necessity is why the compressed relocatable
kernel compiled by Clang encounters difficulties in booting.

To address this problem, it is proposed to apply dynamic relocations to
place with `--apply-dynamic-relocs`.

Link: https://github.com/ClangBuiltLinux/linux/issues/1962
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-12-09 15:49:15 +08:00
Bibo Mao
d43f37b734 LoongArch: Implement constant timer shutdown interface 
When a cpu is hot-unplugged, it is put in idle state and the function
arch_cpu_idle_dead() is called. The timer interrupt for this processor
should be disabled, otherwise there will be pending timer interrupt for
the unplugged cpu, so that vcpu is prevented from giving up scheduling
when system is running in vm mode.

This patch implements the timer shutdown interface so that the constant
timer will be properly disabled when a CPU is hot-unplugged.

Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-21 15:03:25 +08:00
Huacai Chen
19d86a4962 LoongArch: Mark {dmw,tlb}_virt_to_page() exports as non-GPL 
Mark {dmw,tlb}_virt_to_page() exports as non-GPL, in order to let
out-of-tree modules (e.g. OpenZFS) be built without errors. Otherwise
we get:

ERROR: modpost: GPL-incompatible module zfs.ko uses GPL-only symbol 'dmw_virt_to_page'
ERROR: modpost: GPL-incompatible module zfs.ko uses GPL-only symbol 'tlb_virt_to_page'

Reported-by: Haowu Ge <gehaowu@bitmoe.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-21 15:03:25 +08:00
Huacai Chen
902d75cdf0 LoongArch: Silence the boot warning about 'nokaslr' 
The kernel parameter 'nokaslr' is handled before start_kernel(), so we
don't need early_param() to mark it technically. But it can cause a boot
warning as follows:

Unknown kernel command line parameters "nokaslr", will be passed to user space.

When we use 'init=/bin/bash', 'nokaslr' which passed to user space will
even cause a kernel panic. So we use early_param() to mark 'nokaslr',
simply print a notice and silence the boot warning (also fix a potential
panic). This logic is similar to RISC-V.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-21 15:03:25 +08:00
Huacai Chen
ee2daf7102 LoongArch: Add __percpu annotation for __percpu_read()/__percpu_write() 
When build kernel with C=1, we get:

arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces)
arch/loongarch/kernel/process.c:234:46:    expected void *ptr
arch/loongarch/kernel/process.c:234:46:    got unsigned long [noderef] __percpu *
arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces)
arch/loongarch/kernel/process.c:234:46:    expected void *ptr
arch/loongarch/kernel/process.c:234:46:    got unsigned long [noderef] __percpu *
arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces)
arch/loongarch/kernel/process.c:234:46:    expected void *ptr
arch/loongarch/kernel/process.c:234:46:    got unsigned long [noderef] __percpu *
arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces)
arch/loongarch/kernel/process.c:234:46:    expected void *ptr
arch/loongarch/kernel/process.c:234:46:    got unsigned long [noderef] __percpu *

Add __percpu annotation for __percpu_read()/__percpu_write() can avoid
such warnings. __percpu_xchg() and other functions don't need annotation
because their wrapper, i.e. _pcp_protect(), already suppresses warnings.

Also adjust the indentations in this file.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311080409.LlOfTR3m-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311080840.Vc2kXhfp-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311081340.3k72KKdg-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311120926.cjYHyoYw-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311152142.g6UyNx1R-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311160339.DbhaH8LX-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311181454.CTPrSYmQ-lkp@intel.com/
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-21 15:03:25 +08:00
WANG Rui
aa0cbc1b50 LoongArch: Record pc instead of offset in la_abs relocation 
To clarify, the previous version functioned flawlessly. However, it's
worth noting that the LLVM's LoongArch backend currently lacks support
for cross-section label calculations. With this patch, we enable the use
of clang to compile relocatable kernels.

Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-21 15:03:25 +08:00
WANG Rui
cbfd44bd5c LoongArch: Explicitly set -fdirect-access-external-data for vmlinux 
After this llvm commit [1], The -fno-pic does not imply direct access
external data. Explicitly set -fdirect-access-external-data for vmlinux
that can avoids GOT entries.

Link: 47eeee2977
Suggested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-21 15:03:25 +08:00
Masahiro Yamada
d3ec75bc63 LoongArch: Add dependency between vmlinuz.efi and vmlinux.efi 
A common issue in Makefile is a race in parallel building.

You need to be careful to prevent multiple threads from writing to the
same file simultaneously.

Commit 3939f33450 ("ARM: 8418/1: add boot image dependencies to not
generate invalid images") addressed such a bad scenario.

A similar symptom occurs with the following command:

  $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
    [ snip ]
    SORTTAB vmlinux
    OBJCOPY arch/loongarch/boot/vmlinux.efi
    OBJCOPY arch/loongarch/boot/vmlinux.efi
    PAD     arch/loongarch/boot/vmlinux.bin
    GZIP    arch/loongarch/boot/vmlinuz
    OBJCOPY arch/loongarch/boot/vmlinuz.o
    LD      arch/loongarch/boot/vmlinuz.efi.elf
    OBJCOPY arch/loongarch/boot/vmlinuz.efi

The log "OBJCOPY arch/loongarch/boot/vmlinux.efi" is displayed twice.

It indicates that two threads simultaneously enter arch/loongarch/boot/
and write to arch/loongarch/boot/vmlinux.efi.

It occasionally leads to a build failure:

  $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
    [ snip ]
    SORTTAB vmlinux
    OBJCOPY arch/loongarch/boot/vmlinux.efi
    PAD     arch/loongarch/boot/vmlinux.bin
  truncate: Invalid number: ‘arch/loongarch/boot/vmlinux.bin’
  make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13:
  arch/loongarch/boot/vmlinux.bin] Error 1
  make[2]: *** Deleting file 'arch/loongarch/boot/vmlinux.bin'
  make[1]: *** [arch/loongarch/Makefile:146: vmlinuz.efi] Error 2
  make[1]: *** Waiting for unfinished jobs....
  make: *** [Makefile:234: __sub-make] Error 2

vmlinuz.efi depends on vmlinux.efi, but such a dependency is not
specified in arch/loongarch/Makefile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-21 15:03:25 +08:00
Linus Torvalds
4eeee6636a LoongArch changes for v6.7 
1, Support PREEMPT_DYNAMIC with static keys;
 2, Relax memory ordering for atomic operations;
 3, Support BPF CPU v4 instructions for LoongArch;
 4, Some build and runtime warning fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmVQWXgWHGNoZW5odWFj
 YWlAa2VybmVsLm9yZwAKCRAChivD8uImepDTEACS808EsgSNIM1+JwldhdqKOErt
 XDWlLuIddVpenInx8F+9GnZJzKBU+wl+Ow5ejcVarjcecIJDv5UhoVrbhpeOHkfv
 RszRXQR4p/ZNSFvdraYDjjJ9UX6bp5rq7vMUC2d9bLazMauAfwf7T/HJ5qj9OYZi
 RLlcwaKo2UQHYsT7nJicjh0qpH1YpZQBYTaUUCwzilzB6vAIOTf6X12vFmhtM/i+
 5RIPnesMA1IQSm2ywUODpDHCs7Pirvy8aJvx0CsYdi3xl1yg3pUS6u69Ms61uWlw
 29yYhNbWmVnDikTVLTNISDb/jwto5SAVB2KQKBhF1trF4ZBNE6r7sP4m2tfllYo9
 KXK9tm0U8McS5o46Qd5er6eEnxL7mEeAsc12tNKUYOMe3SIkmHJmj/rZQOtpsiBg
 zqQsYkGUfO2VAwMWiGke8dxPZElOYwZ3UCOpbEpXEXy3NW71VJTIuQFGmsYKJhdy
 3xaAtQxdffE5yUTt2j3Y8Mex2b2oSUBSF263imsZjzWOOxd480iaoejtamf1V779
 bElevzZjMDmbiQ7kiVSf96TWc7iYcSv33jhP4DorKIqnPseYPfrXEeD1xY7JV+IU
 kkvSlO0hAJzVMmQgu5n0PPT1wrVpuvwtbsfcRobIkr1vktZyLaKHRq7rh4R5HTRL
 ZUUm6c0kUDywGT+J4A==
 =bmFe
 -----END PGP SIGNATURE-----

Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - support PREEMPT_DYNAMIC with static keys

 - relax memory ordering for atomic operations

 - support BPF CPU v4 instructions for LoongArch

 - some build and runtime warning fixes

* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  selftests/bpf: Enable cpu v4 tests for LoongArch
  LoongArch: BPF: Support signed mod instructions
  LoongArch: BPF: Support signed div instructions
  LoongArch: BPF: Support 32-bit offset jmp instructions
  LoongArch: BPF: Support unconditional bswap instructions
  LoongArch: BPF: Support sign-extension mov instructions
  LoongArch: BPF: Support sign-extension load instructions
  LoongArch: Add more instruction opcodes and emit_* helpers
  LoongArch/smp: Call rcutree_report_cpu_starting() earlier
  LoongArch: Relax memory ordering for atomic operations
  LoongArch: Mark __percpu functions as always inline
  LoongArch: Disable module from accessing external data directly
  LoongArch: Support PREEMPT_DYNAMIC with static keys
 2023-11-12 10:58:08 -08:00
Hengqi Chen
7b6b13d329 LoongArch: BPF: Support signed mod instructions 
Add support for signed mod instructions.

Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-08 14:12:21 +08:00
Hengqi Chen
2425c9e002 LoongArch: BPF: Support signed div instructions 
Add support for signed div instructions.

Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-08 14:12:21 +08:00
Hengqi Chen
9ddd2b8d1a LoongArch: BPF: Support 32-bit offset jmp instructions 
Add support for 32-bit offset jmp instruction. Currently, we use b
instruction which supports range within ±128MB for such jumps. This
should be large enough for BPF progs.

Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-08 14:12:16 +08:00
Hengqi Chen
4ebf9216e7 LoongArch: BPF: Support unconditional bswap instructions 
Add support for unconditional bswap instruction. Since LoongArch is
always little-endian, just treat unconditional bswap the same as big-
endian conversion.

Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-08 14:12:16 +08:00
Hengqi Chen
f48012f161 LoongArch: BPF: Support sign-extension mov instructions 
Add support for sign-extension mov instructions.

Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-08 14:12:16 +08:00
Hengqi Chen
7111afe8fb LoongArch: BPF: Support sign-extension load instructions 
Add support for sign-extension load instructions.

Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-08 14:12:16 +08:00
Hengqi Chen
add2802440 LoongArch: Add more instruction opcodes and emit_* helpers 
This patch adds more instruction opcodes and their corresponding emit_*
helpers which will be used in later patches.

Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-08 14:12:15 +08:00
Huacai Chen
a2ccf46333 LoongArch/smp: Call rcutree_report_cpu_starting() earlier 
rcutree_report_cpu_starting() must be called before cpu_probe() to avoid
the following lockdep splat that triggered by calling __alloc_pages() when
CONFIG_PROVE_RCU_LIST=y:

 =============================
 WARNING: suspicious RCU usage
 6.6.0+ #980 Not tainted
 -----------------------------
 kernel/locking/lockdep.c:3761 RCU-list traversed in non-reader section!!
 other info that might help us debug this:
 RCU used illegally from offline CPU!
 rcu_scheduler_active = 1, debug_locks = 1
 1 lock held by swapper/1/0:
  #0: 900000000c82ef98 (&pcp->lock){+.+.}-{2:2}, at: get_page_from_freelist+0x894/0x1790
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.0+ #980
 Stack : 0000000000000001 9000000004f79508 9000000004893670 9000000100310000
         90000001003137d0 0000000000000000 90000001003137d8 9000000004f79508
         0000000000000000 0000000000000001 0000000000000000 90000000048a3384
         203a656d616e2065 ca43677b3687e616 90000001002c3480 0000000000000008
         000000000000009d 0000000000000000 0000000000000001 80000000ffffe0b8
         000000000000000d 0000000000000033 0000000007ec0000 13bbf50562dad831
         9000000005140748 0000000000000000 9000000004f79508 0000000000000004
         0000000000000000 9000000005140748 90000001002bad40 0000000000000000
         90000001002ba400 0000000000000000 9000000003573ec8 0000000000000000
         00000000000000b0 0000000000000004 0000000000000000 0000000000070000
         ...
 Call Trace:
 [<9000000003573ec8>] show_stack+0x38/0x150
 [<9000000004893670>] dump_stack_lvl+0x74/0xa8
 [<900000000360d2bc>] lockdep_rcu_suspicious+0x14c/0x190
 [<900000000361235c>] __lock_acquire+0xd0c/0x2740
 [<90000000036146f4>] lock_acquire+0x104/0x2c0
 [<90000000048a955c>] _raw_spin_lock_irqsave+0x5c/0x90
 [<900000000381cd5c>] rmqueue_bulk+0x6c/0x950
 [<900000000381fc0c>] get_page_from_freelist+0xd4c/0x1790
 [<9000000003821c6c>] __alloc_pages+0x1bc/0x3e0
 [<9000000003583b40>] tlb_init+0x150/0x2a0
 [<90000000035742a0>] per_cpu_trap_init+0xf0/0x110
 [<90000000035712fc>] cpu_probe+0x3dc/0x7a0
 [<900000000357ed20>] start_secondary+0x40/0xb0
 [<9000000004897138>] smpboot_entry+0x54/0x58

raw_smp_processor_id() is required in order to avoid calling into lockdep
before RCU has declared the CPU to be watched for readers.

See also commit 29368e0939 ("x86/smpboot: Move rcu_cpu_starting() earlier"),
commit de5d9dae15 ("s390/smp: move rcu_cpu_starting() earlier") and commit
99f070b623 ("powerpc/smp: Call rcu_cpu_starting() earlier").

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-08 14:12:15 +08:00
WANG Rui
affef66b65 LoongArch: Relax memory ordering for atomic operations 
This patch relaxes the implementation while satisfying the memory ordering
requirements for atomic operations, which will help improve performance on
LA664+.

Unixbench with full threads (8)
                                           before       after
  Dhrystone 2 using register variables   203910714.2  203909539.8   0.00%
  Double-Precision Whetstone                 37930.9        37931   0.00%
  Execl Throughput                           29431.5      29545.8   0.39%
  File Copy 1024 bufsize 2000 maxblocks    6645759.5      6676320   0.46%
  File Copy 256 bufsize 500 maxblocks      2138772.4    2144182.4   0.25%
  File Copy 4096 bufsize 8000 maxblocks   11640698.4     11602703  -0.33%
  Pipe Throughput                          8849077.7    8917009.4   0.77%
  Pipe-based Context Switching             1255108.5    1287277.3   2.56%
  Process Creation                           50825.9      50442.1  -0.76%
  Shell Scripts (1 concurrent)               25795.8      25942.3   0.57%
  Shell Scripts (8 concurrent)                3812.6       3835.2   0.59%
  System Call Overhead                     9248212.6    9353348.6   1.14%
                                                                  =======
  System Benchmarks Index Score               8076.6       8114.4   0.47%

Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-08 14:12:15 +08:00
Nathan Chancellor
71945968d8 LoongArch: Mark __percpu functions as always inline 
A recent change to the optimization pipeline in LLVM reveals some
fragility around the inlining of LoongArch's __percpu functions, which
manifests as a BUILD_BUG() failure:

  In file included from kernel/sched/build_policy.c:17:
  In file included from include/linux/sched/cputime.h:5:
  In file included from include/linux/sched/signal.h:5:
  In file included from include/linux/rculist.h:11:
  In file included from include/linux/rcupdate.h:26:
  In file included from include/linux/irqflags.h:18:
  arch/loongarch/include/asm/percpu.h:97:3: error: call to '__compiletime_assert_51' declared with 'error' attribute: BUILD_BUG failed
     97 |                 BUILD_BUG();
        |                 ^
  include/linux/build_bug.h:59:21: note: expanded from macro 'BUILD_BUG'
     59 | #define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed")
        |                     ^
  include/linux/build_bug.h:39:37: note: expanded from macro 'BUILD_BUG_ON_MSG'
     39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
        |                                     ^
  include/linux/compiler_types.h:425:2: note: expanded from macro 'compiletime_assert'
    425 |         _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
        |         ^
  include/linux/compiler_types.h:413:2: note: expanded from macro '_compiletime_assert'
    413 |         __compiletime_assert(condition, msg, prefix, suffix)
        |         ^
  include/linux/compiler_types.h:406:4: note: expanded from macro '__compiletime_assert'
    406 |                         prefix ## suffix();                             \
        |                         ^
  <scratch space>:86:1: note: expanded from here
     86 | __compiletime_assert_51
        | ^
  1 error generated.

If these functions are not inlined (which the compiler is free to do
even with functions marked with the standard 'inline' keyword), the
BUILD_BUG() in the default case cannot be eliminated since the compiler
cannot prove it is never used, resulting in a build failure due to the
error attribute.

Mark these functions as __always_inline to guarantee inlining so that
the BUILD_BUG() only triggers when the default case genuinely cannot be
eliminated due to an unexpected size.

Cc:  <stable@vger.kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1955
Fixes: 46859ac8af ("LoongArch: Add multi-processor (SMP) support")
Link: 1a2e77cf9e
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-08 14:12:15 +08:00
WANG Rui
21eb2bfe27 LoongArch: Disable module from accessing external data directly 
The distance between vmlinux and the module is too far so that PC-REL
cannot be accessed directly, only GOT.

When compiling module with GCC, the option `-mdirect-extern-access` is
disabled by default. The Clang option `-fdirect-access-external-data` is
enabled by default, so it needs to be explicitly disabled.

Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-08 14:12:07 +08:00
Huacai Chen
80c7889de7 LoongArch: Support PREEMPT_DYNAMIC with static keys 
Since commit 4e90d0522a ("riscv: support PREEMPT_DYNAMIC with
static keys"), the infrastructure is complete and we can simply select
HAVE_PREEMPT_DYNAMIC_KEY to enable PREEMPT_DYNAMIC on LoongArch because
we already support static keys.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-11-08 14:12:01 +08:00
Linus Torvalds
5c5e048b24 Kbuild updates for v6.7 
- Implement the binary search in modpost for faster symbol lookup
 
  - Respect HOSTCC when linking host programs written in Rust
 
  - Change the binrpm-pkg target to generate kernel-devel RPM package
 
  - Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE
 
  - Unify vdso_install rules
 
  - Remove unused __memexit* annotations
 
  - Eliminate stale whitelisting for __devinit/__devexit from modpost
 
  - Enable dummy-tools to handle the -fpatchable-function-entry flag
 
  - Add 'userldlibs' syntax
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmVFIZgVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGeKwP+wd2kCrxAgS4zPffOcO3cVHfZwJe
 AXOrTp/v73gzxb9eHXH6TmEDf1Rv7EwW3fmmGJosopJGD6itBqzJa4bNDrbq40rY
 XStmg0NRmTrIG20CHGgaGWxb8/7WMrYfu0rhFdUXJjmbny6XwJ3US9FvDPC0mZz7
 w9VCq5CZOqMsJcQyGkAR7uCHDRzNWiZ/Vnfbz3aa6abFzp7dsjhOgDy5SQ6qZgQz
 AwHHKNEN+G3HWmGDZqcbV9aDaCk4btnz64h843RAxjy2HNJF360Ohm2KOcdJr5lo
 DSSStkogBkZNSRQPtqtfknDjzITjeF4JAnUw5ivOtt8ERaO3JRUcr5gHjfw5iV/n
 o4pC1SXmFzdfoN4dogoYF9rz3j955mSFlT/DSbSbuQS/ELzQs0nsqERxhV4zNCsX
 KvYPUqKzZLW3i8pHNuhh7z7t4Nbz1zXqUa19FvaLNtFTCtS8/IA868a59S0uqT9I
 EAIqrNy9qAsk8UuQUxWVx0qf9f5wKGYxW62iMIF9F2lsFRWA8H588CFPUuSU9Bhk
 KAsvzq249MUGJd0RAjF92EWJgNz/nYzZfFTEL5HKAVauYY5UCyR3AVjrak761I8z
 ctVskA7eVkaW4eARfcp15Fna15FHVzxBJ3B26oKYIJBQfJLjzZcV8XeMtEcQjEGU
 jzl+oRqB/Q3oD7Nx
 =PeX7
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Implement the binary search in modpost for faster symbol lookup

 - Respect HOSTCC when linking host programs written in Rust

 - Change the binrpm-pkg target to generate kernel-devel RPM package

 - Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE

 - Unify vdso_install rules

 - Remove unused __memexit* annotations

 - Eliminate stale whitelisting for __devinit/__devexit from modpost

 - Enable dummy-tools to handle the -fpatchable-function-entry flag

 - Add 'userldlibs' syntax

* tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
  kbuild: support 'userldlibs' syntax
  kbuild: dummy-tools: pretend we understand -fpatchable-function-entry
  kbuild: Correct missing architecture-specific hyphens
  modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS
  modpost: merge sectioncheck table entries regarding init/exit sections
  modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS
  modpost: disallow the combination of EXPORT_SYMBOL and __meminit*
  modpost: remove EXIT_SECTIONS macro
  modpost: remove MEM_INIT_SECTIONS macro
  modpost: remove more symbol patterns from the section check whitelist
  modpost: disallow *driver to reference .meminit* sections
  linux/init: remove __memexit* annotations
  modpost: remove ALL_EXIT_DATA_SECTIONS macro
  kbuild: simplify cmd_ld_multi_m
  kbuild: avoid too many execution of scripts/pahole-flags.sh
  kbuild: remove ARCH_POSTLINK from module builds
  kbuild: unify no-compiler-targets and no-sync-config-targets
  kbuild: unify vdso_install rules
  docs: kbuild: add INSTALL_DTBS_PATH
  UML: remove unused cmd_vdso_install
  ...
 2023-11-04 08:07:19 -10:00
Linus Torvalds
1f24458a10 TTY/Serial changes for 6.7-rc1 
Here is the big set of tty/serial driver changes for 6.7-rc1.  Included
 in here are:
   - console/vgacon cleanups and removals from Arnd
   - tty core and n_tty cleanups from Jiri
   - lots of 8250 driver updates and cleanups
   - sc16is7xx serial driver updates
   - dt binding updates
   - first set of port lock wrapers from Thomas for the printk fixes
     coming in future releases
   - other small serial and tty core cleanups and updates
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTbaw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yk9+gCeKdoRb8FDwGCO/GaoHwR4EzwQXhQAoKXZRmN5
 LTtw9sbfGIiBdOTtgLPb
 =6PJr
 -----END PGP SIGNATURE-----

Merge tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial updates from Greg KH:
 "Here is the big set of tty/serial driver changes for 6.7-rc1. Included
  in here are:

   - console/vgacon cleanups and removals from Arnd

   - tty core and n_tty cleanups from Jiri

   - lots of 8250 driver updates and cleanups

   - sc16is7xx serial driver updates

   - dt binding updates

   - first set of port lock wrapers from Thomas for the printk fixes
     coming in future releases

   - other small serial and tty core cleanups and updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
  serdev: Replace custom code with device_match_acpi_handle()
  serdev: Simplify devm_serdev_device_open() function
  serdev: Make use of device_set_node()
  tty: n_gsm: add copyright Siemens Mobility GmbH
  tty: n_gsm: fix race condition in status line change on dead connections
  serial: core: Fix runtime PM handling for pending tx
  vgacon: fix mips/sibyte build regression
  dt-bindings: serial: drop unsupported samsung bindings
  tty: serial: samsung: drop earlycon support for unsupported platforms
  tty: 8250: Add note for PX-835
  tty: 8250: Fix IS-200 PCI ID comment
  tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
  tty: 8250: Add support for Intashield IX cards
  tty: 8250: Add support for additional Brainboxes PX cards
  tty: 8250: Fix up PX-803/PX-857
  tty: 8250: Fix port count of PX-257
  tty: 8250: Add support for Intashield IS-100
  tty: 8250: Add support for Brainboxes UP cards
  tty: 8250: Add support for additional Brainboxes UC cards
  tty: 8250: Remove UC-257 and UC-431
  ...
 2023-11-03 15:44:25 -10:00
Linus Torvalds
8f6f76a6a2 As usual, lots of singleton and doubleton patches all over the tree and 
there's little I can say which isn't in the individual changelogs.
 
 The lengthier patch series are
 
 - "kdump: use generic functions to simplify crashkernel reservation in
   arch", from Baoquan He.  This is mainly cleanups and consolidation of
   the "crashkernel=" kernel parameter handling.
 
 - After much discussion, David Laight's "minmax: Relax type checks in
   min() and max()" is here.  Hopefully reduces some typecasting and the
   use of min_t() and max_t().
 
 - A group of patches from Oleg Nesterov which clean up and slightly fix
   our handling of reads from /proc/PID/task/...  and which remove
   task_struct.therad_group.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA
 jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4
 63BNcG3+hM9nwGJHb5lyh5m79nBMRg0=
 =On4u
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:
 "As usual, lots of singleton and doubleton patches all over the tree
  and there's little I can say which isn't in the individual changelogs.

  The lengthier patch series are

   - 'kdump: use generic functions to simplify crashkernel reservation
     in arch', from Baoquan He. This is mainly cleanups and
     consolidation of the 'crashkernel=' kernel parameter handling

   - After much discussion, David Laight's 'minmax: Relax type checks in
     min() and max()' is here. Hopefully reduces some typecasting and
     the use of min_t() and max_t()

   - A group of patches from Oleg Nesterov which clean up and slightly
     fix our handling of reads from /proc/PID/task/... and which remove
     task_struct.thread_group"

* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
  scripts/gdb/vmalloc: disable on no-MMU
  scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
  .mailmap: add address mapping for Tomeu Vizoso
  mailmap: update email address for Claudiu Beznea
  tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
  .mailmap: map Benjamin Poirier's address
  scripts/gdb: add lx_current support for riscv
  ocfs2: fix a spelling typo in comment
  proc: test ProtectionKey in proc-empty-vm test
  proc: fix proc-empty-vm test with vsyscall
  fs/proc/base.c: remove unneeded semicolon
  do_io_accounting: use sig->stats_lock
  do_io_accounting: use __for_each_thread()
  ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
  ocfs2: fix a typo in a comment
  scripts/show_delta: add __main__ judgement before main code
  treewide: mark stuff as __ro_after_init
  fs: ocfs2: check status values
  proc: test /proc/${pid}/statm
  compiler.h: move __is_constexpr() to compiler.h
  ...
 2023-11-02 20:53:31 -10:00
Linus Torvalds
ecae0bd517 Many singleton patches against the MM code. The patch series which are 
included in this merge do the following:
 
 - Kemeng Shi has contributed some compation maintenance work in the
   series "Fixes and cleanups to compaction".
 
 - Joel Fernandes has a patchset ("Optimize mremap during mutual
   alignment within PMD") which fixes an obscure issue with mremap()'s
   pagetable handling during a subsequent exec(), based upon an
   implementation which Linus suggested.
 
 - More DAMON/DAMOS maintenance and feature work from SeongJae Park i the
   following patch series:
 
 	mm/damon: misc fixups for documents, comments and its tracepoint
 	mm/damon: add a tracepoint for damos apply target regions
 	mm/damon: provide pseudo-moving sum based access rate
 	mm/damon: implement DAMOS apply intervals
 	mm/damon/core-test: Fix memory leaks in core-test
 	mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
 
 - In the series "Do not try to access unaccepted memory" Adrian Hunter
   provides some fixups for the recently-added "unaccepted memory' feature.
   To increase the feature's checking coverage.  "Plug a few gaps where
   RAM is exposed without checking if it is unaccepted memory".
 
 - In the series "cleanups for lockless slab shrink" Qi Zheng has done
   some maintenance work which is preparation for the lockless slab
   shrinking code.
 
 - Qi Zheng has redone the earlier (and reverted) attempt to make slab
   shrinking lockless in the series "use refcount+RCU method to implement
   lockless slab shrink".
 
 - David Hildenbrand contributes some maintenance work for the rmap code
   in the series "Anon rmap cleanups".
 
 - Kefeng Wang does more folio conversions and some maintenance work in
   the migration code.  Series "mm: migrate: more folio conversion and
   unification".
 
 - Matthew Wilcox has fixed an issue in the buffer_head code which was
   causing long stalls under some heavy memory/IO loads.  Some cleanups
   were added on the way.  Series "Add and use bdev_getblk()".
 
 - In the series "Use nth_page() in place of direct struct page
   manipulation" Zi Yan has fixed a potential issue with the direct
   manipulation of hugetlb page frames.
 
 - In the series "mm: hugetlb: Skip initialization of gigantic tail
   struct pages if freed by HVO" has improved our handling of gigantic
   pages in the hugetlb vmmemmep optimizaton code.  This provides
   significant boot time improvements when significant amounts of gigantic
   pages are in use.
 
 - Matthew Wilcox has sent the series "Small hugetlb cleanups" - code
   rationalization and folio conversions in the hugetlb code.
 
 - Yin Fengwei has improved mlock()'s handling of large folios in the
   series "support large folio for mlock"
 
 - In the series "Expose swapcache stat for memcg v1" Liu Shixin has
   added statistics for memcg v1 users which are available (and useful)
   under memcg v2.
 
 - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
   prctl so that userspace may direct the kernel to not automatically
   propagate the denial to child processes.  The series is named "MDWE
   without inheritance".
 
 - Kefeng Wang has provided the series "mm: convert numa balancing
   functions to use a folio" which does what it says.
 
 - In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch
   makes is possible for a process to propagate KSM treatment across
   exec().
 
 - Huang Ying has enhanced memory tiering's calculation of memory
   distances.  This is used to permit the dax/kmem driver to use "high
   bandwidth memory" in addition to Optane Data Center Persistent Memory
   Modules (DCPMM).  The series is named "memory tiering: calculate
   abstract distance based on ACPI HMAT"
 
 - In the series "Smart scanning mode for KSM" Stefan Roesch has
   optimized KSM by teaching it to retain and use some historical
   information from previous scans.
 
 - Yosry Ahmed has fixed some inconsistencies in memcg statistics in the
   series "mm: memcg: fix tracking of pending stats updates values".
 
 - In the series "Implement IOCTL to get and optionally clear info about
   PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits
   us to atomically read-then-clear page softdirty state.  This is mainly
   used by CRIU.
 
 - Hugh Dickins contributed the series "shmem,tmpfs: general maintenance"
   - a bunch of relatively minor maintenance tweaks to this code.
 
 - Matthew Wilcox has increased the use of the VMA lock over file-backed
   page faults in the series "Handle more faults under the VMA lock".  Some
   rationalizations of the fault path became possible as a result.
 
 - In the series "mm/rmap: convert page_move_anon_rmap() to
   folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups
   and folio conversions.
 
 - In the series "various improvements to the GUP interface" Lorenzo
   Stoakes has simplified and improved the GUP interface with an eye to
   providing groundwork for future improvements.
 
 - Andrey Konovalov has sent along the series "kasan: assorted fixes and
   improvements" which does those things.
 
 - Some page allocator maintenance work from Kemeng Shi in the series
   "Two minor cleanups to break_down_buddy_pages".
 
 - In thes series "New selftest for mm" Breno Leitao has developed
   another MM self test which tickles a race we had between madvise() and
   page faults.
 
 - In the series "Add folio_end_read" Matthew Wilcox provides cleanups
   and an optimization to the core pagecache code.
 
 - Nhat Pham has added memcg accounting for hugetlb memory in the series
   "hugetlb memcg accounting".
 
 - Cleanups and rationalizations to the pagemap code from Lorenzo
   Stoakes, in the series "Abstract vma_merge() and split_vma()".
 
 - Audra Mitchell has fixed issues in the procfs page_owner code's new
   timestamping feature which was causing some misbehaviours.  In the
   series "Fix page_owner's use of free timestamps".
 
 - Lorenzo Stoakes has fixed the handling of new mappings of sealed files
   in the series "permit write-sealed memfd read-only shared mappings".
 
 - Mike Kravetz has optimized the hugetlb vmemmap optimization in the
   series "Batch hugetlb vmemmap modification operations".
 
 - Some buffer_head folio conversions and cleanups from Matthew Wilcox in
   the series "Finish the create_empty_buffers() transition".
 
 - As a page allocator performance optimization Huang Ying has added
   automatic tuning to the allocator's per-cpu-pages feature, in the series
   "mm: PCP high auto-tuning".
 
 - Roman Gushchin has contributed the patchset "mm: improve performance
   of accounted kernel memory allocations" which improves their performance
   by ~30% as measured by a micro-benchmark.
 
 - folio conversions from Kefeng Wang in the series "mm: convert page
   cpupid functions to folios".
 
 - Some kmemleak fixups in Liu Shixin's series "Some bugfix about
   kmemleak".
 
 - Qi Zheng has improved our handling of memoryless nodes by keeping them
   off the allocation fallback list.  This is done in the series "handle
   memoryless nodes more appropriately".
 
 - khugepaged conversions from Vishal Moola in the series "Some
   khugepaged folio conversions".
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA
 jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y
 FgeUPAD1oasg6CP+INZvCj34waNxwAc=
 =E+Y4
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:
 "Many singleton patches against the MM code. The patch series which are
  included in this merge do the following:

   - Kemeng Shi has contributed some compation maintenance work in the
     series 'Fixes and cleanups to compaction'

   - Joel Fernandes has a patchset ('Optimize mremap during mutual
     alignment within PMD') which fixes an obscure issue with mremap()'s
     pagetable handling during a subsequent exec(), based upon an
     implementation which Linus suggested

   - More DAMON/DAMOS maintenance and feature work from SeongJae Park i
     the following patch series:

	mm/damon: misc fixups for documents, comments and its tracepoint
	mm/damon: add a tracepoint for damos apply target regions
	mm/damon: provide pseudo-moving sum based access rate
	mm/damon: implement DAMOS apply intervals
	mm/damon/core-test: Fix memory leaks in core-test
	mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval

   - In the series 'Do not try to access unaccepted memory' Adrian
     Hunter provides some fixups for the recently-added 'unaccepted
     memory' feature. To increase the feature's checking coverage. 'Plug
     a few gaps where RAM is exposed without checking if it is
     unaccepted memory'

   - In the series 'cleanups for lockless slab shrink' Qi Zheng has done
     some maintenance work which is preparation for the lockless slab
     shrinking code

   - Qi Zheng has redone the earlier (and reverted) attempt to make slab
     shrinking lockless in the series 'use refcount+RCU method to
     implement lockless slab shrink'

   - David Hildenbrand contributes some maintenance work for the rmap
     code in the series 'Anon rmap cleanups'

   - Kefeng Wang does more folio conversions and some maintenance work
     in the migration code. Series 'mm: migrate: more folio conversion
     and unification'

   - Matthew Wilcox has fixed an issue in the buffer_head code which was
     causing long stalls under some heavy memory/IO loads. Some cleanups
     were added on the way. Series 'Add and use bdev_getblk()'

   - In the series 'Use nth_page() in place of direct struct page
     manipulation' Zi Yan has fixed a potential issue with the direct
     manipulation of hugetlb page frames

   - In the series 'mm: hugetlb: Skip initialization of gigantic tail
     struct pages if freed by HVO' has improved our handling of gigantic
     pages in the hugetlb vmmemmep optimizaton code. This provides
     significant boot time improvements when significant amounts of
     gigantic pages are in use

   - Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
     rationalization and folio conversions in the hugetlb code

   - Yin Fengwei has improved mlock()'s handling of large folios in the
     series 'support large folio for mlock'

   - In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
     added statistics for memcg v1 users which are available (and
     useful) under memcg v2

   - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
     prctl so that userspace may direct the kernel to not automatically
     propagate the denial to child processes. The series is named 'MDWE
     without inheritance'

   - Kefeng Wang has provided the series 'mm: convert numa balancing
     functions to use a folio' which does what it says

   - In the series 'mm/ksm: add fork-exec support for prctl' Stefan
     Roesch makes is possible for a process to propagate KSM treatment
     across exec()

   - Huang Ying has enhanced memory tiering's calculation of memory
     distances. This is used to permit the dax/kmem driver to use 'high
     bandwidth memory' in addition to Optane Data Center Persistent
     Memory Modules (DCPMM). The series is named 'memory tiering:
     calculate abstract distance based on ACPI HMAT'

   - In the series 'Smart scanning mode for KSM' Stefan Roesch has
     optimized KSM by teaching it to retain and use some historical
     information from previous scans

   - Yosry Ahmed has fixed some inconsistencies in memcg statistics in
     the series 'mm: memcg: fix tracking of pending stats updates
     values'

   - In the series 'Implement IOCTL to get and optionally clear info
     about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
     which permits us to atomically read-then-clear page softdirty
     state. This is mainly used by CRIU

   - Hugh Dickins contributed the series 'shmem,tmpfs: general
     maintenance', a bunch of relatively minor maintenance tweaks to
     this code

   - Matthew Wilcox has increased the use of the VMA lock over
     file-backed page faults in the series 'Handle more faults under the
     VMA lock'. Some rationalizations of the fault path became possible
     as a result

   - In the series 'mm/rmap: convert page_move_anon_rmap() to
     folio_move_anon_rmap()' David Hildenbrand has implemented some
     cleanups and folio conversions

   - In the series 'various improvements to the GUP interface' Lorenzo
     Stoakes has simplified and improved the GUP interface with an eye
     to providing groundwork for future improvements

   - Andrey Konovalov has sent along the series 'kasan: assorted fixes
     and improvements' which does those things

   - Some page allocator maintenance work from Kemeng Shi in the series
     'Two minor cleanups to break_down_buddy_pages'

   - In thes series 'New selftest for mm' Breno Leitao has developed
     another MM self test which tickles a race we had between madvise()
     and page faults

   - In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
     and an optimization to the core pagecache code

   - Nhat Pham has added memcg accounting for hugetlb memory in the
     series 'hugetlb memcg accounting'

   - Cleanups and rationalizations to the pagemap code from Lorenzo
     Stoakes, in the series 'Abstract vma_merge() and split_vma()'

   - Audra Mitchell has fixed issues in the procfs page_owner code's new
     timestamping feature which was causing some misbehaviours. In the
     series 'Fix page_owner's use of free timestamps'

   - Lorenzo Stoakes has fixed the handling of new mappings of sealed
     files in the series 'permit write-sealed memfd read-only shared
     mappings'

   - Mike Kravetz has optimized the hugetlb vmemmap optimization in the
     series 'Batch hugetlb vmemmap modification operations'

   - Some buffer_head folio conversions and cleanups from Matthew Wilcox
     in the series 'Finish the create_empty_buffers() transition'

   - As a page allocator performance optimization Huang Ying has added
     automatic tuning to the allocator's per-cpu-pages feature, in the
     series 'mm: PCP high auto-tuning'

   - Roman Gushchin has contributed the patchset 'mm: improve
     performance of accounted kernel memory allocations' which improves
     their performance by ~30% as measured by a micro-benchmark

   - folio conversions from Kefeng Wang in the series 'mm: convert page
     cpupid functions to folios'

   - Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
     kmemleak'

   - Qi Zheng has improved our handling of memoryless nodes by keeping
     them off the allocation fallback list. This is done in the series
     'handle memoryless nodes more appropriately'

   - khugepaged conversions from Vishal Moola in the series 'Some
     khugepaged folio conversions'"

[ bcachefs conflicts with the dynamically allocated shrinkers have been
  resolved as per Stephen Rothwell in

     https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/

  with help from Qi Zheng.

  The clone3 test filtering conflict was half-arsed by yours truly ]

* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
  mm/damon/sysfs: update monitoring target regions for online input commit
  mm/damon/sysfs: remove requested targets when online-commit inputs
  selftests: add a sanity check for zswap
  Documentation: maple_tree: fix word spelling error
  mm/vmalloc: fix the unchecked dereference warning in vread_iter()
  zswap: export compression failure stats
  Documentation: ubsan: drop "the" from article title
  mempolicy: migration attempt to match interleave nodes
  mempolicy: mmap_lock is not needed while migrating folios
  mempolicy: alloc_pages_mpol() for NUMA policy without vma
  mm: add page_rmappable_folio() wrapper
  mempolicy: remove confusing MPOL_MF_LAZY dead code
  mempolicy: mpol_shared_policy_init() without pseudo-vma
  mempolicy trivia: use pgoff_t in shared mempolicy tree
  mempolicy trivia: slightly more consistent naming
  mempolicy trivia: delete those ancient pr_debug()s
  mempolicy: fix migrate_pages(2) syscall return nr_failed
  kernfs: drop shared NUMA mempolicy hooks
  hugetlbfs: drop shared NUMA mempolicy pretence
  mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
  ...
 2023-11-02 19:38:47 -10:00
Linus Torvalds
bc3012f4e3 This update includes the following changes: 
API:
 
 - Add virtual-address based lskcipher interface.
 - Optimise ahash/shash performance in light of costly indirect calls.
 - Remove ahash alignmask attribute.
 
 Algorithms:
 
 - Improve AES/XTS performance of 6-way unrolling for ppc.
 - Remove some uses of obsolete algorithms (md4, md5, sha1).
 - Add FIPS 202 SHA-3 support in pkcs1pad.
 - Add fast path for single-page messages in adiantum.
 - Remove zlib-deflate.
 
 Drivers:
 
 - Add support for S4 in meson RNG driver.
 - Add STM32MP13x support in stm32.
 - Add hwrng interface support in qcom-rng.
 - Add support for deflate algorithm in hisilicon/zip.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmVB3vgACgkQxycdCkmx
 i6dsOBAAykbnX8BpnpnOXYywE9ZWrl98rAk51MK0N9olZNfg78zRPIv7fFxFdC20
 SDJrDSNPmn0Qvaa5e0EfoAdklsm0k2GkXL/BwPKMKWUsyIoJVYI3WrBMnjBy9xMp
 yfME+h0bKoXJCZKnYkIUSGUejmUPSyRlEylrXoFlH/VWYwAaii/x9zwreQoF+0LR
 KI24A1q8AYs6Dw9HSfndaAub9GOzrqKYs6fSaMG+77Y4UC5aoi5J9Bp2G3uVyHay
 x/0bZtIxKXS9wn+LeG/3GspX23x/I5VwBOdAoMigrYmAIaIg5qgyMszudltTAs4R
 zF1Kh7WsnM5+vpnBSeigzo+/GGOU3QTz8y3tBTg+3ZR7GWGOwQLiizhOYqCyOfAH
 pIm6c++sZw/OOHiL69Nt4HeLKzGNYYWk3s4X/B/6cqoouPfOsfBaQobZNx9zfy7q
 ZNEvSVBjrFX/L6wDSotny1LTWLUNjHbmLaMV5uQZ/SQKEtv19fp2Dl7SsLkHH+3v
 ldOAwfoJR6QcSwz3Ez02TUAvQhtP172Hnxi7u44eiZu2aUboLhCFr7aEU6kVdBCx
 1rIRVHD1oqlOEDRwPRXzhF3I8R4QDORJIxZ6UUhg7yueuI+XCGDsBNC+LqBrBmSR
 IbdjqmSDUBhJyM5yMnt1VFYhqKQ/ZzwZ3JQviwW76Es9pwEIolM=
 =IZmR
 -----END PGP SIGNATURE-----

Merge tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto updates from Herbert Xu:
 "API:
   - Add virtual-address based lskcipher interface
   - Optimise ahash/shash performance in light of costly indirect calls
   - Remove ahash alignmask attribute

  Algorithms:
   - Improve AES/XTS performance of 6-way unrolling for ppc
   - Remove some uses of obsolete algorithms (md4, md5, sha1)
   - Add FIPS 202 SHA-3 support in pkcs1pad
   - Add fast path for single-page messages in adiantum
   - Remove zlib-deflate

  Drivers:
   - Add support for S4 in meson RNG driver
   - Add STM32MP13x support in stm32
   - Add hwrng interface support in qcom-rng
   - Add support for deflate algorithm in hisilicon/zip"

* tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits)
  crypto: adiantum - flush destination page before unmapping
  crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place
  Documentation/module-signing.txt: bring up to date
  module: enable automatic module signing with FIPS 202 SHA-3
  crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
  crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support
  crypto: FIPS 202 SHA-3 register in hash info for IMA
  x509: Add OIDs for FIPS 202 SHA-3 hash and signatures
  crypto: ahash - optimize performance when wrapping shash
  crypto: ahash - check for shash type instead of not ahash type
  crypto: hash - move "ahash wrapping shash" functions to ahash.c
  crypto: talitos - stop using crypto_ahash::init
  crypto: chelsio - stop using crypto_ahash::init
  crypto: ahash - improve file comment
  crypto: ahash - remove struct ahash_request_priv
  crypto: ahash - remove crypto_ahash_alignmask
  crypto: gcm - stop using alignmask of ahash
  crypto: chacha20poly1305 - stop using alignmask of ahash
  crypto: ccm - stop using alignmask of ahash
  net: ipv6: stop checking crypto_ahash_alignmask
  ...
 2023-11-02 16:15:30 -10:00
Linus Torvalds
6803bd7956 ARM: 
* Generalized infrastructure for 'writable' ID registers, effectively
   allowing userspace to opt-out of certain vCPU features for its guest
 
 * Optimization for vSGI injection, opportunistically compressing MPIDR
   to vCPU mapping into a table
 
 * Improvements to KVM's PMU emulation, allowing userspace to select
   the number of PMCs available to a VM
 
 * Guest support for memory operation instructions (FEAT_MOPS)
 
 * Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
   bugs and getting rid of useless code
 
 * Changes to the way the SMCCC filter is constructed, avoiding wasted
   memory allocations when not in use
 
 * Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
   the overhead of errata mitigations
 
 * Miscellaneous kernel and selftest fixes
 
 LoongArch:
 
 * New architecture.  The hardware uses the same model as x86, s390
   and RISC-V, where guest/host mode is orthogonal to supervisor/user
   mode.  The virtualization extensions are very similar to MIPS,
   therefore the code also has some similarities but it's been cleaned
   up to avoid some of the historical bogosities that are found in
   arch/mips.  The kernel emulates MMU, timer and CSR accesses, while
   interrupt controllers are only emulated in userspace, at least for
   now.
 
 RISC-V:
 
 * Support for the Smstateen and Zicond extensions
 
 * Support for virtualizing senvcfg
 
 * Support for virtualized SBI debug console (DBCN)
 
 S390:
 
 * Nested page table management can be monitored through tracepoints
   and statistics
 
 x86:
 
 * Fix incorrect handling of VMX posted interrupt descriptor in KVM_SET_LAPIC,
   which could result in a dropped timer IRQ
 
 * Avoid WARN on systems with Intel IPI virtualization
 
 * Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs without
   forcing more common use cases to eat the extra memory overhead.
 
 * Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
   SBPB, aka Selective Branch Predictor Barrier).
 
 * Fix a bug where restoring a vCPU snapshot that was taken within 1 second of
   creating the original vCPU would cause KVM to try to synchronize the vCPU's
   TSC and thus clobber the correct TSC being set by userspace.
 
 * Compute guest wall clock using a single TSC read to avoid generating an
   inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads.
 
 * "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain
   about a "Firmware Bug" if the bit isn't set for select F/M/S combos.
   Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to appease Windows Server
   2022.
 
 * Don't apply side effects to Hyper-V's synthetic timer on writes from
   userspace to fix an issue where the auto-enable behavior can trigger
   spurious interrupts, i.e. do auto-enabling only for guest writes.
 
 * Remove an unnecessary kick of all vCPUs when synchronizing the dirty log
   without PML enabled.
 
 * Advertise "support" for non-serializing FS/GS base MSR writes as appropriate.
 
 * Harden the fast page fault path to guard against encountering an invalid
   root when walking SPTEs.
 
 * Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
 
 * Use the fast path directly from the timer callback when delivering Xen
   timer events, instead of waiting for the next iteration of the run loop.
   This was not done so far because previously proposed code had races,
   but now care is taken to stop the hrtimer at critical points such as
   restarting the timer or saving the timer information for userspace.
 
 * Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future flag.
 
 * Optimize injection of PMU interrupts that are simultaneous with NMIs.
 
 * Usual handful of fixes for typos and other warts.
 
 x86 - MTRR/PAT fixes and optimizations:
 
 * Clean up code that deals with honoring guest MTRRs when the VM has
   non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
 
 * Zap EPT entries when non-coherent DMA assignment stops/start to prevent
   using stale entries with the wrong memtype.
 
 * Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y.
   This was done as a workaround for virtual machine BIOSes that did not
   bother to clear CR0.CD (because ancient KVM/QEMU did not bother to
   set it, in turn), and there's zero reason to extend the quirk to
   also ignore guest PAT.
 
 x86 - SEV fixes:
 
 * Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts SHUTDOWN while
   running an SEV-ES guest.
 
 * Clean up the recognition of emulation failures on SEV guests, when KVM would
   like to "skip" the instruction but it had already been partially emulated.
   This makes it possible to drop a hack that second guessed the (insufficient)
   information provided by the emulator, and just do the right thing.
 
 Documentation:
 
 * Various updates and fixes, mostly for x86
 
 * MTRR and PAT fixes and optimizations:
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmVBZc0UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroP1LQf+NgsmZ1lkGQlKdSdijoQ856w+k0or
 l2SV1wUwiEdFPSGK+RTUlHV5Y1ni1dn/CqCVIJZKEI3ZtZ1m9/4HKIRXvbMwFHIH
 hx+E4Lnf8YUjsGjKTLd531UKcpphztZavQ6pXLEwazkSkDEra+JIKtooI8uU+9/p
 bd/eF1V+13a8CHQf1iNztFJVxqBJbVlnPx4cZDRQQvewskIDGnVDtwbrwCUKGtzD
 eNSzhY7si6O2kdQNkuA8xPhg29dYX9XLaCK2K1l8xOUm8WipLdtF86GAKJ5BVuOL
 6ek/2QCYjZ7a+coAZNfgSEUi8JmFHEqCo7cnKmWzPJp+2zyXsdudqAhT1g==
 =UIxm
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "ARM:

   - Generalized infrastructure for 'writable' ID registers, effectively
     allowing userspace to opt-out of certain vCPU features for its
     guest

   - Optimization for vSGI injection, opportunistically compressing
     MPIDR to vCPU mapping into a table

   - Improvements to KVM's PMU emulation, allowing userspace to select
     the number of PMCs available to a VM

   - Guest support for memory operation instructions (FEAT_MOPS)

   - Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
     bugs and getting rid of useless code

   - Changes to the way the SMCCC filter is constructed, avoiding wasted
     memory allocations when not in use

   - Load the stage-2 MMU context at vcpu_load() for VHE systems,
     reducing the overhead of errata mitigations

   - Miscellaneous kernel and selftest fixes

  LoongArch:

   - New architecture for kvm.

     The hardware uses the same model as x86, s390 and RISC-V, where
     guest/host mode is orthogonal to supervisor/user mode. The
     virtualization extensions are very similar to MIPS, therefore the
     code also has some similarities but it's been cleaned up to avoid
     some of the historical bogosities that are found in arch/mips. The
     kernel emulates MMU, timer and CSR accesses, while interrupt
     controllers are only emulated in userspace, at least for now.

  RISC-V:

   - Support for the Smstateen and Zicond extensions

   - Support for virtualizing senvcfg

   - Support for virtualized SBI debug console (DBCN)

  S390:

   - Nested page table management can be monitored through tracepoints
     and statistics

  x86:

   - Fix incorrect handling of VMX posted interrupt descriptor in
     KVM_SET_LAPIC, which could result in a dropped timer IRQ

   - Avoid WARN on systems with Intel IPI virtualization

   - Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs
     without forcing more common use cases to eat the extra memory
     overhead.

   - Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
     SBPB, aka Selective Branch Predictor Barrier).

   - Fix a bug where restoring a vCPU snapshot that was taken within 1
     second of creating the original vCPU would cause KVM to try to
     synchronize the vCPU's TSC and thus clobber the correct TSC being
     set by userspace.

   - Compute guest wall clock using a single TSC read to avoid
     generating an inaccurate time, e.g. if the vCPU is preempted
     between multiple TSC reads.

   - "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which
     complain about a "Firmware Bug" if the bit isn't set for select
     F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to
     appease Windows Server 2022.

   - Don't apply side effects to Hyper-V's synthetic timer on writes
     from userspace to fix an issue where the auto-enable behavior can
     trigger spurious interrupts, i.e. do auto-enabling only for guest
     writes.

   - Remove an unnecessary kick of all vCPUs when synchronizing the
     dirty log without PML enabled.

   - Advertise "support" for non-serializing FS/GS base MSR writes as
     appropriate.

   - Harden the fast page fault path to guard against encountering an
     invalid root when walking SPTEs.

   - Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.

   - Use the fast path directly from the timer callback when delivering
     Xen timer events, instead of waiting for the next iteration of the
     run loop. This was not done so far because previously proposed code
     had races, but now care is taken to stop the hrtimer at critical
     points such as restarting the timer or saving the timer information
     for userspace.

   - Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future
     flag.

   - Optimize injection of PMU interrupts that are simultaneous with
     NMIs.

   - Usual handful of fixes for typos and other warts.

  x86 - MTRR/PAT fixes and optimizations:

   - Clean up code that deals with honoring guest MTRRs when the VM has
     non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.

   - Zap EPT entries when non-coherent DMA assignment stops/start to
     prevent using stale entries with the wrong memtype.

   - Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y

     This was done as a workaround for virtual machine BIOSes that did
     not bother to clear CR0.CD (because ancient KVM/QEMU did not bother
     to set it, in turn), and there's zero reason to extend the quirk to
     also ignore guest PAT.

  x86 - SEV fixes:

   - Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts
     SHUTDOWN while running an SEV-ES guest.

   - Clean up the recognition of emulation failures on SEV guests, when
     KVM would like to "skip" the instruction but it had already been
     partially emulated. This makes it possible to drop a hack that
     second guessed the (insufficient) information provided by the
     emulator, and just do the right thing.

  Documentation:

   - Various updates and fixes, mostly for x86

   - MTRR and PAT fixes and optimizations"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits)
  KVM: selftests: Avoid using forced target for generating arm64 headers
  tools headers arm64: Fix references to top srcdir in Makefile
  KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
  KVM: arm64: selftest: Perform ISB before reading PAR_EL1
  KVM: arm64: selftest: Add the missing .guest_prepare()
  KVM: arm64: Always invalidate TLB for stage-2 permission faults
  KVM: x86: Service NMI requests after PMI requests in VM-Enter path
  KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
  KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
  KVM: arm64: Refine _EL2 system register list that require trap reinjection
  arm64: Add missing _EL2 encodings
  arm64: Add missing _EL12 encodings
  KVM: selftests: aarch64: vPMU test for validating user accesses
  KVM: selftests: aarch64: vPMU register test for unimplemented counters
  KVM: selftests: aarch64: vPMU register test for implemented counters
  KVM: selftests: aarch64: Introduce vpmu_counter_access test
  tools: Import arm_pmuv3.h
  KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
  KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
  KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
  ...
 2023-11-02 15:45:15 -10:00
Paolo Bonzini
ef12ea629e LoongArch KVM changes for v6.7 
Add LoongArch's KVM support. Loongson 3A5000/3A6000 supports hardware
 assisted virtualization. With cpu virtualization, there are separate
 hw-supported user mode and kernel mode in guest mode. With memory
 virtualization, there are two-level hw mmu table for guest mode and host
 mode. Also there is separate hw cpu timer with consant frequency in
 guest mode, so that vm can migrate between hosts with different freq.
 Currently, we are able to boot LoongArch Linux Guests.
 
 Few key aspects of KVM LoongArch added by this series are:
 1. Enable kvm hardware function when kvm module is loaded.
 2. Implement VM and vcpu related ioctl interface such as vcpu create,
    vcpu run etc. GET_ONE_REG/SET_ONE_REG ioctl commands are use to
    get general registers one by one.
 3. Hardware access about MMU, timer and csr are emulated in kernel.
 4. Hardwares such as mmio and iocsr device are emulated in user space
    such as IPI, irqchips, pci devices etc.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmUaKb4WHGNoZW5odWFj
 YWlAa2VybmVsLm9yZwAKCRAChivD8uImeuj+EACFIsWmHb8I3q4feviWBIdRcve7
 xzpseO/r2Xfx5IdU6/iAKIW1YNVpHU3c8+nYS20K73uGJnMJnAZ/hmPFf+0pJ4AB
 qZL4aBClRynH4YsdGUeYwBfU7VMKg66ijiaZkqFEa7lSePA81gwYY2MYao58J7Gw
 qMe9IPnxcU/a+UqxTrFs2/G4aSb4SR0cp69GFSIGXZ7uKBc4LCMZ0ujzo/NY/V4G
 NkoJi8I85frF1OQbJaeJ/lGkC1Dx3Qbv7AbXYObA8K/ka1c5lr9RKraha2BOFPif
 mHYDa7lE6qj6e5LX9QVcpkuDnxs2yaA0Zny/p2I2o7AS0xUU/eFGGdnu1bkMqrsw
 42ZuKL5Dtp/Wl5W2EEIkCVmZar+3UOeiWwGXPTk4A4fQHEGayXzJvrdUa/7f+O6Y
 JWYKSVjo6ZHg0ArKFtA13N54KximsrOKTpaB4fuUIP5SXMB/+JVn77/93Oyq6XSY
 9+7yUTzjeMqz+4o8DLPhBIyJPvZ6cxAfx2i4htHiQg7e9ir0rZE3jsOtvJ2pgo3K
 1QtGSJWH9dQMeOFnBfpDIvx3aDBcXPayXHNdaL3t/gCwJCpRuH1g6HeDTYXCJsQc
 qu6FDoeQn5+5IeEzoZawapQIJ2y7iXTk5SoysybKcKmnp8yYKB6olCqW8cxbWeMs
 HSqTUusPMsnJGlJMTw==
 =jaPm
 -----END PGP SIGNATURE-----

Merge tag 'loongarch-kvm-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.7

Add LoongArch's KVM support. Loongson 3A5000/3A6000 supports hardware
assisted virtualization. With cpu virtualization, there are separate
hw-supported user mode and kernel mode in guest mode. With memory
virtualization, there are two-level hw mmu table for guest mode and host
mode. Also there is separate hw cpu timer with consant frequency in
guest mode, so that vm can migrate between hosts with different freq.
Currently, we are able to boot LoongArch Linux Guests.

Few key aspects of KVM LoongArch added by this series are:
1. Enable kvm hardware function when kvm module is loaded.
2. Implement VM and vcpu related ioctl interface such as vcpu create,
   vcpu run etc. GET_ONE_REG/SET_ONE_REG ioctl commands are use to
   get general registers one by one.
3. Hardware access about MMU, timer and csr are emulated in kernel.
4. Hardwares such as mmio and iocsr device are emulated in user space
   such as IPI, irqchips, pci devices etc.
 2023-10-31 09:55:40 -04:00
Linus Torvalds
3cf3fabccb Locking changes in this cycle are: 
- Futex improvements:
 
     - Add the 'futex2' syscall ABI, which is an attempt to get away from the
       multiplex syscall and adds a little room for extentions, while lifting
       some limitations.
 
     - Fix futex PI recursive rt_mutex waiter state bug
 
     - Fix inter-process shared futexes on no-MMU systems
 
     - Use folios instead of pages
 
  - Micro-optimizations of locking primitives:
 
     - Improve arch_spin_value_unlocked() on asm-generic ticket spinlock
       architectures, to improve lockref code generation.
 
     - Improve the x86-32 lockref_get_not_zero() main loop by adding
       build-time CMPXCHG8B support detection for the relevant lockref code,
       and by better interfacing the CMPXCHG8B assembly code with the compiler.
 
     - Introduce arch_sync_try_cmpxchg() on x86 to improve sync_try_cmpxchg()
       code generation. Convert some sync_cmpxchg() users to sync_try_cmpxchg().
 
     - Micro-optimize rcuref_put_slowpath()
 
  - Locking debuggability improvements:
 
     - Improve CONFIG_DEBUG_RT_MUTEXES=y to have a fast-path as well
 
     - Enforce atomicity of sched_submit_work(), which is de-facto atomic but
       was un-enforced previously.
 
     - Extend <linux/cleanup.h>'s no_free_ptr() with __must_check semantics
 
     - Fix ww_mutex self-tests
 
     - Clean up const-propagation in <linux/seqlock.h> and simplify
       the API-instantiation macros a bit.
 
  - RT locking improvements:
 
     - Provide the rt_mutex_*_schedule() primitives/helpers and use them
       in the rtmutex code to avoid recursion vs. rtlock on the PI state.
 
     - Add nested blocking lockdep asserts to rt_mutex_lock(), rtlock_lock()
       and rwbase_read_lock().
 
  - Plus misc fixes & cleanups
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmU877IRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1g9jw/+N7rxQ78dmFCYh4UWnLCYvuKP0/ivHErG
 493JcB8MupuA2tfJHIkDdr4aM2mNq2E61w69/WlZAQWWD6pdOhwgF5Xf5eoEcJm0
 vsAhWBGLxihXdtevPuMAx0dEpg3AMp2wc6i5PkN831KdPUgCNsrKq9Bfnfef7/G8
 MQTSHjmtba6jxleyxfEa4tE2xe5PJX825nRfkX2e1cf+stkYua+uJFxVxUfxFWGE
 4pBy70D9OC7MsJ44WWOA1gwkVtMMiBTmRPNjlP8Gz2GQ0f3ERHRwYk3jDHOPHZI6
 0GNt7pE3IMXQn2UuDtfkvv9IFTd+U5qD+APnWIn2ntWXqzGLFqOlmovMrobVn7El
 olYDCyweWPG71m1Qblsb1VK2QjRPQVJ9NAEg8RlDHIu2ThxHbMysDVGPVOYnPFq4
 S8QFpmldzbNoPU4rDJyT1fAmoUIrusBHkl+Us3yGfC74iM+fHnDEvaSoMZbzEdY1
 x/Nocj9XgKEgfXdYzrCWFmZ9xXqHkO25/wDL6yKqBdQtvaEalXuHTT6mQcYxrUPm
 Xx1BPan2Jg7p4u2oOFcVtKewUtRH9KBx8qytr5S+JK4PJbrBsixMnr84HLd/3X2V
 ykYkO+367T5MTYv4TnJDE5vdurzUqekKSCFPY3skPujPJfdLj1vsPzYf9iMkCLdo
 hU2f/R+Wpdk=
 =36Ff
 -----END PGP SIGNATURE-----

Merge tag 'locking-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking updates from Info Molnar:
 "Futex improvements:

   - Add the 'futex2' syscall ABI, which is an attempt to get away from
     the multiplex syscall and adds a little room for extentions, while
     lifting some limitations.

   - Fix futex PI recursive rt_mutex waiter state bug

   - Fix inter-process shared futexes on no-MMU systems

   - Use folios instead of pages

  Micro-optimizations of locking primitives:

   - Improve arch_spin_value_unlocked() on asm-generic ticket spinlock
     architectures, to improve lockref code generation

   - Improve the x86-32 lockref_get_not_zero() main loop by adding
     build-time CMPXCHG8B support detection for the relevant lockref
     code, and by better interfacing the CMPXCHG8B assembly code with
     the compiler

   - Introduce arch_sync_try_cmpxchg() on x86 to improve
     sync_try_cmpxchg() code generation. Convert some sync_cmpxchg()
     users to sync_try_cmpxchg().

   - Micro-optimize rcuref_put_slowpath()

  Locking debuggability improvements:

   - Improve CONFIG_DEBUG_RT_MUTEXES=y to have a fast-path as well

   - Enforce atomicity of sched_submit_work(), which is de-facto atomic
     but was un-enforced previously.

   - Extend <linux/cleanup.h>'s no_free_ptr() with __must_check
     semantics

   - Fix ww_mutex self-tests

   - Clean up const-propagation in <linux/seqlock.h> and simplify the
     API-instantiation macros a bit

  RT locking improvements:

   - Provide the rt_mutex_*_schedule() primitives/helpers and use them
     in the rtmutex code to avoid recursion vs. rtlock on the PI state.

   - Add nested blocking lockdep asserts to rt_mutex_lock(),
     rtlock_lock() and rwbase_read_lock()

  .. plus misc fixes & cleanups"

* tag 'locking-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  futex: Don't include process MM in futex key on no-MMU
  locking/seqlock: Fix grammar in comment
  alpha: Fix up new futex syscall numbers
  locking/seqlock: Propagate 'const' pointers within read-only methods, remove forced type casts
  locking/lockdep: Fix string sizing bug that triggers a format-truncation compiler-warning
  locking/seqlock: Change __seqprop() to return the function pointer
  locking/seqlock: Simplify SEQCOUNT_LOCKNAME()
  locking/atomics: Use atomic_try_cmpxchg_release() to micro-optimize rcuref_put_slowpath()
  locking/atomic, xen: Use sync_try_cmpxchg() instead of sync_cmpxchg()
  locking/atomic/x86: Introduce arch_sync_try_cmpxchg()
  locking/atomic: Add generic support for sync_try_cmpxchg() and its fallback
  locking/seqlock: Fix typo in comment
  futex/requeue: Remove unnecessary ‘NULL’ initialization from futex_proxy_trylock_atomic()
  locking/local, arch: Rewrite local_add_unless() as a static inline function
  locking/debug: Fix debugfs API return value checks to use IS_ERR()
  locking/ww_mutex/test: Make sure we bail out instead of livelock
  locking/ww_mutex/test: Fix potential workqueue corruption
  locking/ww_mutex/test: Use prng instead of rng to avoid hangs at bootup
  futex: Add sys_futex_requeue()
  futex: Add flags2 argument to futex_requeue()
  ...
 2023-10-30 12:38:48 -10:00
Masahiro Yamada
56769ba4b2 kbuild: unify vdso_install rules 
Currently, there is no standard implementation for vdso_install,
leading to various issues:

 1. Code duplication

    Many architectures duplicate similar code just for copying files
    to the install destination.

    Some architectures (arm, sparc, x86) create build-id symlinks,
    introducing more code duplication.

 2. Unintended updates of in-tree build artifacts

    The vdso_install rule depends on the vdso files to install.
    It may update in-tree build artifacts. This can be problematic,
    as explained in commit 19514fc665 ("arm, kbuild: make
    "make install" not depend on vmlinux").

 3. Broken code in some architectures

    Makefile code is often copied from one architecture to another
    without proper adaptation.

    'make vdso_install' for parisc does not work.

    'make vdso_install' for s390 installs vdso64, but not vdso32.

To address these problems, this commit introduces a generic vdso_install
rule.

Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.

For example, arch/x86/Makefile looks like this:

  vdso-install-$(CONFIG_X86_64)           += arch/x86/entry/vdso/vdso64.so.dbg
  vdso-install-$(CONFIG_X86_X32_ABI)      += arch/x86/entry/vdso/vdsox32.so.dbg
  vdso-install-$(CONFIG_X86_32)           += arch/x86/entry/vdso/vdso32.so.dbg
  vdso-install-$(CONFIG_IA32_EMULATION)   += arch/x86/entry/vdso/vdso32.so.dbg

These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.

vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.

The following is a snippet from arch/arm64/Makefile.

  vdso-install-$(CONFIG_COMPAT_VDSO)      += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so

This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de>  # parisc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
 2023-10-28 21:09:02 +09:00
Eric Biggers
d72c46f798 crypto: loongarch/crc32 - remove redundant setting of alignmask to 0 
This unnecessary explicit setting of cra_alignmask to 0 shows up when
grepping for shash algorithms that set an alignmask.  Remove it.  No
change in behavior.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2023-10-27 18:04:24 +08:00
Icenowy Zheng
278be83601 LoongArch: Disable WUC for pgprot_writecombine() like ioremap_wc() 
Currently the code disables WUC only disables it for ioremap_wc(), which
is only used when mapping writecombine pages like ioremap() (mapped to
the kernel space). But for VRAM mapped in TTM/GEM, it is mapped with a
crafted pgprot by the pgprot_writecombine() function, in which case WUC
isn't disabled now.

Disable WUC for pgprot_writecombine() (fallback to SUC) if needed, like
ioremap_wc().

This improves the AMDGPU driver's stability (solves some misrendering)
on Loongson-3A5000/3A6000 machines.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-10-18 08:42:52 +08:00
Huacai Chen
477a0ebec1 LoongArch: Replace kmap_atomic() with kmap_local_page() in copy_user_highpage() 
Replace kmap_atomic()/kunmap_atomic() calls with kmap_local_page()/
kunmap_local() in copy_user_highpage() which can be invoked from both
preemptible and atomic context [1].

[1] https://lore.kernel.org/all/20201029222652.302358281@linutronix.de/

Suggested-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-10-18 08:42:52 +08:00
Huacai Chen
449c2756c2 LoongArch: Export symbol invalid_pud_table for modules building 
Export symbol invalid_pud_table for modules building (such as the KVM
module) if 4-level page tables enabled. Otherwise we get:

ERROR: modpost: "invalid_pud_table" [arch/loongarch/kvm/kvm.ko] undefined!

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-10-18 08:42:52 +08:00