The same codec seems to have different personalities. ESSX8316 was
used for Baytrail/CherryTrail, ESSX8336 seems to be used for AppoloLake,
GeminiLake, JasperLake and TigerLake devices.
BugLink: https://github.com/thesofproject/linux/issues/2955
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>-e
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211029011109.23633-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The setting from the cirrus,ts-inv property should be applied to the
TIP_SENSE_INV bit, as this is the one that actually affects the jack
detect block. The TS_INV bit only swaps the meaning of the PLUG and
UNPLUG interrupts and should always be 1 for the interrupts to have
the normal meaning.
Due to some misunderstanding the driver had been implemented to
configure the TS_INV bit based on the jack switch polarity. This made
the interrupts behave the correct way around, but left the jack detect
block, button detect and analogue circuits always interpreting an open
switch as unplugged.
The signal chain inside the codec is:
SENSE pin -> TIP_SENSE_INV -> TS_INV -> (invert) -> interrupts
|
v
Jack detect,
button detect and
analog control
As the TIP_SENSE_INV already performs the necessary inversion the
TS_INV bit never needs to change. It must always be 1 to yield the
expected interrupt behaviour.
Some extra confusion has arisen because of the additional invert in the
interrupt path, meaning that a value applied to the TS_INV bit produces
the opposite effect of applying it to the TIP_SENSE_INV bit. The ts-inv
property has therefore always had the opposite effect to what might be
expected (0 = inverted, 1 = not inverted). To maintain the meaning of
the ts-inv property it must be inverted when applied to TIP_SENSE_INV.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/20211028140902.11786-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now UAPI of ALSA firewire stack got enough functions to interact with
userspace for protocol of MOTU FireWire series. Let's remove the relevant
TODO.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211029012847.11839-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A user reports functional regression for Mackie Onyx 1640i that the device
generates slow sound with ALSA oxfw driver which supports media clock
recovery. Although the device is based on OXFW971 ASIC, it does not
transfer isochronous packet with own event frequency as expected. The
device seems to adjust event frequency according to events in received
isochronous packets in the beginning of packet streaming. This is
unknown quirk.
This commit fixes the regression to turn the recovery off in driver
side. As a result, nominal frequency is used in duplex packet streaming
between device and driver. For stability of sampling rate in events of
transferred isochronous packet, 4,000 isochronous packets are skipped
in the beginning of packet streaming.
Reference: https://github.com/takaswie/snd-firewire-improve/issues/38
Fixes: 029ffc429440 ("ALSA: oxfw: perform sequence replay for media clock recovery")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211028130325.45772-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clang warns:
sound/soc/qcom/qdsp6/topology.c:465:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
default:
^
sound/soc/qcom/qdsp6/topology.c:465:3: note: insert 'break;' to avoid fall-through
default:
^
break;
1 warning generated.
Clang is a little more pedantic than GCC, which permits implicit
fallthroughs to cases that contain just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to fix
the warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/1495
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211027190823.4057382-1-nathan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When SND_SOC_AMD_RENOIR_MACH or SND_SOC_AMD_RV_RT5682_MACH
are selected, and GPIOLIB is not selected, Kbuild gives
the following warnings, respectively:
WARNING: unmet direct dependencies detected for SND_SOC_DMIC
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
Selected by [y]:
- SND_SOC_AMD_RENOIR_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_RENOIR [=y]
and
WARNING: unmet direct dependencies detected for SND_SOC_MAX98357A
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
Selected by [y]:
- SND_SOC_AMD_RV_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP3x [=y] && I2C [=y] && CROS_EC [=y]
This is because SND_SOC_DMIC and SND_SOC_MAX98357A are
selected by SND_SOC_AMD_RV_RT5682_MACH and SND_SOC_AMD_RENOIR_MACH,
respectively. However, neither of the selectors depend on or select GPIOLIB,
despite their selectees depending on GPIOLIB.
These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://lore.kernel.org/r/20211027184835.112916-1-julianbraha@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In command DSP models, one meter information consists of 4 bytes for
IEEE 764 floating point (binary32). In previous patch, it is exported
to userspace as 32 bit storage since the storage is also handled in
ALSA firewire-motu driver as well in kernel space in which floating point
arithmetic is not preferable. On the other hand, ALSA firewire-motu driver
doesn't perform floating point calculation. The driver just gather meter
information from isochronous packets and fill structure fields for
userspace.
In 'header' target of Kbuild, UAPI headers are processed before installed.
In this timing, #ifdef macro with __KERNEL__ is removed. This mechanism
is useful in the case so that the 32 bit storage can be accessible as u32
type in kernel space and float type in user space. We can see the same
usage in ''struct acct_v3' in 'include/uapi/linux/acct.h'.
This commit is for the above idea. Additionally, due to message
protocol, meter information is filled with 0xffffffff in the end of
period but 0xffffffff is invalid as binary32. To avoid confusion in
userspace application, the last two elements are left without any
assignment.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211027125529.54295-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After further investigation, I realize that the total number of elements
in array is not enough to store all of related messages from device.
This commit refines meter array and message parser.
In terms of channel identifier, register DSP models are classified to
two categories:
1. the target of output is selectable
828mk2, 896hd, and Traveler are in the category. They transfer messages
with channel identifier between 0x00 and 0x13 for input meters,
therefore 20 elements are needed to store.
On the other hand, they transfer messages with channel identifier for one
pair of output meters. The selection is done by asynchronous write
transaction to offset 0x'ffff'f000'0b2c. The table for relationship
between written value and available identifiers is below:
============= ===============
written value identifier pair
============= ===============
0x00000b00 0x80/0x81
0x00000b01 0x82/0x83
... ...
0x00000b0b 0x96/0x97
... ...
0x00000b10 0xa0/0xa1
... ...
0x00000b3f 0xfe/0xff
... ...
greater 0xfe/0xff
============= ===============
Actually in the above three models, 0x96/0x97 pair is the maximum. Thus
the number of available output meter is 24.
2. all of output is available
8 pre, Ultralite, Audio Express, and 4 pre are in the category. They
transfer messages for output meters without any selection. The table for
available identifier for each direction is below:
============== ========= ==========
model input output
============== ========= ==========
8 pre 0x00-0x0f 0x82-0x8d
Ultralite 0x00-0x09 0x82-0x8f
Audio Express 0x00-0x09 0x80-0x8d
4 pre 0x00-0x09 0x80-0x8d
============== ========= ==========
Some of available identifiers might not be used for actual output meters.
Anyway, 24 plus 24 elements accommodate the input/output meters.
I note that isochronous packet from V3HD/V4HD deliver no message.
Notification by asynchronous transaction to registered address seems to be
used for the purpose as well as for change of mixer parameter.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211027125529.54295-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA firewire-motu driver recently got support for event notification via
ALSA HwDep interface for register DSP models. However, when polling ALSA
HwDep cdev, the driver can cause null pointer dereference for the other
models due to accessing to unallocated memory or uninitialized memory.
This commit fixes the bug by check the type of model before accessing to
the memory.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Fixes: 634ec0b2906e ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211027125529.54295-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The series of features will make general and simple for new sof machine driver.
David Lin (2):
ASoC: nau8825: add set_jack coponment support
ASoC: nau8825: add clock management for power saving
sound/soc/codecs/nau8825.c | 48 ++++++++++++++++++++++++++++++++++++--
1 file changed, 46 insertions(+), 2 deletions(-)
We have configurations for this codec on APL, GLK and TGL, somehow the
information that some designs rely on JasperLake was not shared.
BugLink: https://github.com/thesofproject/linux/issues/3210
Fixes: 790049fb6623 ('ASoC: Intel: soc-acpi: apl/glk/tgl: add entry for devices based on ES8336 codec')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027023311.25005-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of error, platform_device_register_data() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e646b51f5dd5 ("ASoC: amd: acp: Add callback for machine driver on ACP")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211027065228.833825-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck reports the following warning:
sound/soc/rockchip/rockchip_i2s_tdm.c:599:9: warning: Identical
condition and return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/rockchip/rockchip_i2s_tdm.c:594:6: note: If condition 'ret'
is true, the function will return/exit
if (ret)
^
sound/soc/rockchip/rockchip_i2s_tdm.c:599:9: note: Returning identical
expression 'ret'
return ret;
^
While the code is not wrong, it's clearer to return 0 directly.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211025185933.144327-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck reports the following warning:
sound/soc/mediatek/mt8195/mt8195-dai-etdm.c:1299:10: style: Variable
'ret' is assigned a value that is never used. [unreadVariable]
int ret = 0;
^
The suggested change aligns the implementation of
mt8195_afe_disable_etdm() with mt8195_afe_enable_etdm() - same
negative return value upon error.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211025185933.144327-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck warning:
sound/soc/mediatek/common/mtk-afe-fe-dai.c:353:8: style: Variable 'i'
is assigned a value that is never used. [unreadVariable]
int i = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211025185933.144327-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck reports a false positive
sound/soc/codecs/nau8821.c:390:17: error: Array 'dmic_speed_sel[4]'
accessed at index 4, which is out of bounds. [arrayIndexOutOfBounds]
dmic_speed_sel[i].param, dmic_speed_sel[i].val);
^
sound/soc/codecs/nau8821.c:378:2: note: After for loop, i has value 4
for (i = 0 ; i < 4 ; i++)
^
sound/soc/codecs/nau8821.c:390:17: note: Array index out of bounds
dmic_speed_sel[i].param, dmic_speed_sel[i].val);
^
While the code is not incorrect, we can deal with the out-of-bounds
check in a clearer way that makes static analysis happy.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211025185933.144327-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 reports warnings:
sound/soc/codecs/nau8821.c:1192: warning: Function parameter or member
'component' not described in 'nau8821_set_fll'
sound/soc/codecs/nau8821.c:1192: warning: Function parameter or member
'pll_id' not described in 'nau8821_set_fll'
sound/soc/codecs/nau8821.c:1192: warning: Function parameter or member
'source' not described in 'nau8821_set_fll'
sound/soc/codecs/nau8821.c:1192: warning: Excess function parameter
'codec' description in 'nau8821_set_fll'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211025185933.144327-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse reports the following warnings:
sound/soc/codecs/rt5682s.c:44:12: error: symbol 'rt5682s_supply_names'
was not declared. Should it be static?
sound/soc/codecs/rt5682s.c:74:26: error: symbol 'rt5682s_reg' was not
declared. Should it be static?
sound/soc/codecs/rt5682s.c:2841:30: error: symbol
'rt5682s_aif1_dai_ops' was not declared. Should it be static?
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211025185933.144327-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing endpoint max-packet sanity check to probe() to avoid
division by zero in alloc_stream_buffers() in case a malicious device
has broken descriptors (or when doing descriptor fuzz testing).
Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).
Fixes: 63978ab3e3e9 ("sound: add Edirol UA-101 support")
Cc: stable@vger.kernel.org # 2.6.34
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211026095401.26522-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Driver probe and remove were inconsistent in what they did to power-down
and neither did all steps. In addition to that, neither function
prevented the interrupt handler from running during and after power-down.
Richard Fitzgerald (2):
ASoC: cs42l42: Reset and power-down on remove() and failed probe()
ASoC: cs42l42: free_irq() before powering-down on probe() fail
sound/soc/codecs/cs42l42.c | 43 +++++++++++++++++++++++++++++++------------
1 file changed, 31 insertions(+), 12 deletions(-)
--
2.11.0
This patch set is to add support for lpass sc7280 based targets.
Upadate compatible name and change of bulk clock voting to optional
clock voting in digital codecs va, rx, tx macro drivers.
Changes Since V3:
-- Removed fixes tag.
-- Change signedoff by sequence.
Changes Since V2:
-- Add Tx macro deafults for lpass sc7280
Changes Since V1:
-- Removed individual clock voting and used bulk clock optional.
-- Removed volatile changes and fixed default values.
-- Typo errors.
Srinivasa Rao Mandadapu (5):
ASoC: qcom: Add compatible names in va,wsa,rx,tx codec drivers for
sc7280
ASoC: qcom: dt-bindings: Add compatible names for lpass sc7280 digital
codecs
ASoC: codecs: tx-macro: Enable tx top soundwire mic clock
ASoC: codecs: tx-macro: Update tx default values
ASoC: codecs: Change bulk clock voting to optional voting in digital
codecs
.../bindings/sound/qcom,lpass-rx-macro.yaml | 4 +++-
.../bindings/sound/qcom,lpass-tx-macro.yaml | 4 +++-
.../bindings/sound/qcom,lpass-va-macro.yaml | 4 +++-
.../bindings/sound/qcom,lpass-wsa-macro.yaml | 4 +++-
sound/soc/codecs/lpass-rx-macro.c | 3 ++-
sound/soc/codecs/lpass-tx-macro.c | 25 +++++++++++++++++++---
sound/soc/codecs/lpass-va-macro.c | 3 ++-
sound/soc/codecs/lpass-wsa-macro.c | 1 +
8 files changed, 39 insertions(+), 9 deletions(-)
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Hi Mark,
This version is a respin of v10 fixing a build error in 12/17 patch.
QCOM SoC relevant non-audio patches in this series has been merged into
the Qualcomm drivers-for-5.16 tree, as this series depends those patches
an immutable tag is available at:
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.gittags/20210927135559.738-6-srinivas.kandagatla@linaro.org
This patchset adds ASoC driver support to configure signal processing
framework ("AudioReach") which is integral part of Qualcomm next
generation audio SDK and will be deployed on upcoming Qualcomm chipsets.
It makes use of ASoC Topology to load graphs on to the DSP which is then
managed by APM (Audio Processing Manager) service to prepare/start/stop.
Here is simplified high-level block diagram of AudioReach:
___________________________________________________________
| CPU (Application Processor) |
| +---------+ +---------+ +----------+ |
| | q6apm | | q6apm | | q6apm | |
| | dais | <------> | | <-----> |lpass-dais| |
| +---------+ +---------+ +----------+ |
| ^ ^ |
| | | +---------+ |
| +---------+ v +---------->|topology | |
| | q6prm | +---------+ | | |
| | |<-------->| GPR | +---------+ |
| +---------+ +---------+ |
| ^ ^ |
| | | |
| +----------+ | |
| | q6prm | | |
| |lpass-clks| | |
| +----------+ | |
|____________________________|______________________________|
|
| RPMSG (IPC over GLINK)
____________________________|______________________________
| | |
| +-----------------------+ |
| | | |
| v v q6 (Audio DSP) |
|+-----+ +----------------------------------+ |
|| PRM | | APM (Audio Processing Manager) | |
|+-----+ | . Graph Management | |
| | . Command Handing | |
| | . Event Management | |
| | ... | |
| +----------------------------------+ |
| ^ |
|____________________________|______________________________|
|
| LPASS AIF
____________________________|______________________________
| | Audio I/O |
| v |
| +--------------------------------------------------+ |
| | Audio devices | |
| | CODEC | HDMI-TX | PCM | SLIMBUS | I2S |MI2S |...| |
| | | |
| +--------------------------------------------------+ |
|___________________________________________________________|
AudioReach has constructs of sub-graph, container and modules.
Each sub-graph can have N containers and each Container can have N Modules
and connections between them can be linear or non-linear.
An audio function can be realized with one or many connected
sub-graphs. There are also control/event paths between modules that can
be wired up while building graph to achieve various control mechanism
between modules. These concepts of Sub-Graph, Containers and Modules
are represented in ASoC topology.
Here is simple I2S graph with a Write Shared Memory and a
Volume control module within a single Subgraph (1) with one Container (1)
and 5 modules.
____________________________________________________________
| Sub-Graph [1] |
| _______________________________________________________ |
| | Container [1] | |
| | [WR_SH] -> [PCM DEC] -> [PCM CONV] -> [VOL]-> [I2S-EP]| |
| |_______________________________________________________| |
|____________________________________________________________|
For now this graph is split into two subgraphs to achieve dpcm like below:
________________________________________________ _________________
| Sub-Graph [1] | | Sub-Graph [2] |
| ____________________________________________ | | _____________ |
| | Container [1] | | | |Container [2]| |
| | [WR_SH] -> [PCM DEC] -> [PCM CONV] -> [VOL]| | | | [I2S-EP] | |
| |____________________________________________| | | |_____________| |
|________________________________________________| |_________________|
_________________
| Sub-Graph [3] |
| _____________ |
| |Container [3]| |
| | [DMA-EP] | |
| |_____________| |
|_________________|
This patchset adds very minimal support for AudioReach which includes
supporting sub-graphs containing CODEC DMA ports and simple PCM
Decoder/Encoder and Logger Modules. Additional capabilities will
be built over time to expose features offered by AudioReach.
This patchset is Tested on SM8250 SoC based Qualcomm Robotics Platform RB5
and SM9250 MTP with WSA881X Smart Speaker Amplifiers, DMICs connected via
VA Macro and WCD938x Codec connected via TX and RX Macro and HDMI audio
via I2S.
First 10 Patches are mostly reorganization existing Old QDSP Audio
Framework code and bindings so that we could reuse them on AudioReach.
ASoC topology graphs for DragonBoard RB5 and SM8250 MTP are available at
https://git.linaro.org/people/srinivas.kandagatla/audioreach-topology.git/
and Qualcomm AudioReach DSP headers are available at:
https://source.codeaurora.org/quic/la/platform/vendor/opensource/arspf-headers
Note: There is one false positive warning in this patchset:
audioreach.c:80:45: warning: array of flexible structures
Thanks,
srini
Changes since v10:
- fix build error during arm64 defconfig build reported by Mark in 12/17 patch
for audioreach_tplg_init symbol
Srinivas Kandagatla (17):
ASoC: dt-bindings: move LPASS dai related bindings out of q6afe
ASoC: dt-bindings: move LPASS clocks related bindings out of q6afe
ASoC: dt-bindings: rename q6afe.h to q6dsp-lpass-ports.h
ASoC: qdsp6: q6afe-dai: move lpass audio ports to common file
ASoC: qdsp6: q6afe-clocks: move audio-clocks to common file
ASoC: dt-bindings: q6dsp: add q6apm-lpass-dai compatible
ASoC: dt-bindings: lpass-clocks: add q6prm clocks compatible
ASoC: dt-bindings: add q6apm digital audio stream bindings
ASoC: qdsp6: audioreach: add basic pkt alloc support
ASoC: qdsp6: audioreach: add q6apm support
ASoC: qdsp6: audioreach: add module configuration command helpers
ASoC: qdsp6: audioreach: add Kconfig and Makefile
ASoC: qdsp6: audioreach: add topology support
ASoC: qdsp6: audioreach: add q6apm-dai support
ASoC: qdsp6: audioreach: add q6apm lpass dai support
ASoC: qdsp6: audioreach: add q6prm support
ASoC: qdsp6: audioreach: add support for q6prm-clocks
.../devicetree/bindings/sound/qcom,q6afe.txt | 181 ---
.../bindings/sound/qcom,q6apm-dai.yaml | 53 +
.../sound/qcom,q6dsp-lpass-clocks.yaml | 77 ++
.../sound/qcom,q6dsp-lpass-ports.yaml | 205 +++
include/dt-bindings/sound/qcom,q6afe.h | 203 +--
.../sound/qcom,q6dsp-lpass-ports.h | 208 +++
include/uapi/sound/snd_ar_tokens.h | 208 +++
sound/soc/qcom/Kconfig | 22 +
sound/soc/qcom/qdsp6/Makefile | 11 +-
sound/soc/qcom/qdsp6/audioreach.c | 1130 +++++++++++++++++
sound/soc/qcom/qdsp6/audioreach.h | 726 +++++++++++
sound/soc/qcom/qdsp6/q6afe-clocks.c | 187 +--
sound/soc/qcom/qdsp6/q6afe-dai.c | 687 +---------
sound/soc/qcom/qdsp6/q6apm-dai.c | 416 ++++++
sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 260 ++++
sound/soc/qcom/qdsp6/q6apm.c | 822 ++++++++++++
sound/soc/qcom/qdsp6/q6apm.h | 152 +++
sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c | 186 +++
sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.h | 30 +
sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 627 +++++++++
sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 22 +
sound/soc/qcom/qdsp6/q6prm-clocks.c | 85 ++
sound/soc/qcom/qdsp6/q6prm.c | 202 +++
sound/soc/qcom/qdsp6/q6prm.h | 78 ++
sound/soc/qcom/qdsp6/topology.c | 1113 ++++++++++++++++
25 files changed, 6664 insertions(+), 1227 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
create mode 100644 include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h
create mode 100644 include/uapi/sound/snd_ar_tokens.h
create mode 100644 sound/soc/qcom/qdsp6/audioreach.c
create mode 100644 sound/soc/qcom/qdsp6/audioreach.h
create mode 100644 sound/soc/qcom/qdsp6/q6apm-dai.c
create mode 100644 sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
create mode 100644 sound/soc/qcom/qdsp6/q6apm.c
create mode 100644 sound/soc/qcom/qdsp6/q6apm.h
create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c
create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.h
create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c
create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h
create mode 100644 sound/soc/qcom/qdsp6/q6prm-clocks.c
create mode 100644 sound/soc/qcom/qdsp6/q6prm.c
create mode 100644 sound/soc/qcom/qdsp6/q6prm.h
create mode 100644 sound/soc/qcom/qdsp6/topology.c
--
2.21.0
All configuration symbols for AMD Audio ACP conponents depend on X86 &&
PCI, except for SND_SOC_AMD_ACP_COMMON. Add a dependency on X86 && PCI
to SND_SOC_AMD_ACP_COMMON, to prevent asking the user about AMD Audio
ACP support when configuring a kernel without X86 or PCI support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/30fcedce513186bf89f1f2655b665298250fdc66.1635260849.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
If not all of CONFIG_X86, CONFIG_PCI, and CONFIG_I2C are set:
WARNING: unmet direct dependencies detected for SND_SOC_AMD_MACH_COMMON
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && X86 && PCI [=y] && I2C [=y]
Selected by [y]:
- SND_SOC_AMD_LEGACY_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y]
- SND_SOC_AMD_SOF_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y]
As SND_SOC_AMD_MACH_COMMON depends on X86 && PCI && I2C, all symbols
selecting it should depend on X86 && PCI && I2C, too.
Fixes: 9d8a7be88b3365e4 ("ASoC: amd: acp: Add legacy sound card support for Chrome audio")
Fixes: 9f84940f5004e1d2 ("ASoC: amd: acp: Add SOF audio support on Chrome board")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/dfb03bd33117e26f3f04ce227bb28095109b3d80.1635260849.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
The build only descends into sound/soc/amd/acp/ if
CONFIG_SND_SOC_AMD_ACP_COMMON=y. Hence all later config symbols should
depend on SND_SOC_AMD_ACP_COMMON, to prevent asking the user about
config symbols for driver code that won't be build anyway.
Fixes: 623621a9f9e1a2f4 ("ASoC: amd: Add common framework to support I2S on ACP SOC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/53d1d63bed1865293e6f5085ead21cdbb068fb15.1635260849.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Relying on devm to free the irq handler on probe failure leaves a
small window of opportunity for an interrupt to become pending and
then the handler to run after the chip has been reset and powered
off.
For safety cs42l42_probe() should free the irq in the error path.
As the irq is now disabled by the driver in probe() and remove()
there is no point allocating it as a devres-managed item, so
convert to plain non-devres.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211026125722.10220-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver remove() should assert RESET and disable the supplies.
probe() fail was disabling supplies but it didn't assert reset or
put the codec into a power-down state.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211026125722.10220-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to q6prm (Proxy Resource Manager) module used for clock resources
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-17-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to Audio port dais on LPASS Audio IP using
existing common q6dsp-lpass-ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-16-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to pcm dais in Audio Process Manager.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-15-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that all the code for audioreach and q6apm are in at this point to be
able to compile, start adding Kconfig and Makefile changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-13-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Audioreach module configuration helpers, which will be used by
the q6apm-dai driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-12-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to q6apm (Audio Process Manager) component which is
core Audioreach service running in the DSP.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-11-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Move common parts of q6afe-clocks to q6dsp-lpass-clocks so that we could
reuse most of the driver for new Q6DSP audio frameworks.
This is to make the code reuseable for new Q6DSP AudioReach framework.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Various Q6DSP frameworks will use LPASS Audio IP, so move all the hardware
specific details to a common file so that they could be reused across
multiple Q6DSP frameworks.
In this case all the audio ports definitions can be moved to a common file
to be able to reuse across multiple Q6DSP frameworks.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211026111655.1702-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Change bulk clock frequency voting to optional bulk voting in va, rx and tx macros
to accommodate both ADSP and ADSP bypass based lpass architectures.
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Co-developed-by: Venkata Prasad Potturu <potturu@codeaurora.org>
Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1635234188-7746-6-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
