Although the RCU CPU stall notifiers can be useful for dumping state when
tracking down delicate forward-progress bugs where NUMA effects cause
cache lines to be delivered to a given CPU regularly, but always in a
state that prevents that CPU from making forward progress. These bugs can
be detected by the RCU CPU stall-warning mechanism, but in some cases,
the stall-warnings printk()s disrupt the forward-progress bug before
any useful state can be obtained.
Unfortunately, the notifier mechanism added by commit 5b404fdabacf ("rcu:
Add RCU CPU stall notifier") can make matters worse if used at all
carelessly. For example, if the stall warning was caused by a lock not
being released, then any attempt to acquire that lock in the notifier
will hang. This will prevent not only the notifier from producing any
useful output, but it will also prevent the stall-warning message from
ever appearing.
This commit therefore hides this new RCU CPU stall notifier
mechanism under a new RCU_CPU_STALL_NOTIFIER Kconfig option that
depends on both DEBUG_KERNEL and RCU_EXPERT. In addition, the
rcupdate.rcu_cpu_stall_notifiers=1 kernel boot parameter must also
be specified. The RCU_CPU_STALL_NOTIFIER Kconfig option's help text
contains a warning and explains the dangers of careless use, recommending
lockless notifier code. In addition, a WARN() is triggered each time
that an attempt is made to register a stall-warning notifier in kernels
built with CONFIG_RCU_CPU_STALL_NOTIFIER=y.
This combination of measures will keep use of this mechanism confined to
debug kernels and away from routine deployments.
[ paulmck: Apply Dan Carpenter feedback. ]
Fixes: 5b404fdabacf ("rcu: Add RCU CPU stall notifier")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
For rcutorture tests on RCU implementations that support
force-quiescent-state operations and that set the fqs_duration module
parameter greater than zero, the fqs_task kthread will be created.
However, if the fqs_holdoff module parameter is not set, then its default
value of zero will cause fqs_task enter a long-term busy loop until
stopped by kthread_stop(). This commit therefore adds a fqs_holdoff
check before the fqs_task is created, making sure that whenever the
fqs_task is created, the fqs_holdoff will be greater than zero.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
Currently, the maxcpu is set by traversing online CPUs, however, if the
rcutorture.onoff_holdoff is set zero and onoff_interval is set non-zero,
and the some CPUs with larger cpuid has been offline before setting
maxcpu, for these CPUs, even if they are online again, also cannot
be offload or deoffload. This can result in rcutorture attempting to
(de-)offload CPUs that have never been online, but the (de-)offload code
handles this.
This commit therefore use for_each_possible_cpu() instead of
for_each_online_cpu() in rcu_nocb_toggle().
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
In the past, spinning on schedule_timeout* with a wait of 1 jiffy has
hung the kernel. See for example d52d3a2bf408 ("torture: Fix hang during
kthread shutdown phase").
This issue recently recurred in torture's stutter code. The result is
that the function instantly returns and never goes to sleep, preempting
whatever might otherwise make useful forward progress.
To prevent future issues, apply the commit-d52d3a2bf408 fix throughout
rcutorture, moving from a 1-jiffy wait to a 50-millisecond wait.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
The rcutorture_sched_setaffinity() function is needed by locktorture,
so move its declaration from rcu.h to torture.h and rename it to the
more generic torture_sched_setaffinity() name.
Please note that use of this function is still restricted to torture
tests, and of those, currently only rcutorture and locktorture.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit registers an RCU CPU stall notifier when testing RCU CPU
stalls. The notifier logs a message similar to the following:
rcu_torture_stall_nf: v=1, duration=21001.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Now that torture_random() uses swahw32(), its callers no longer see
not-so-random low-order bits, as these are now swapped up into the upper
16 bits of the torture_random() function's return value. This commit
therefore removes the right-shifting of torture_random() return values.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rtort_pipe_count WARN() indicates that grace periods were unable
to invoke all callbacks during a stutter_wait() interval. But it is
sometimes helpful to have a bit more information as to why. This commit
therefore invokes show_rcu_gp_kthreads() immediately before that WARN()
in order to dump out some relevant information.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add a test number 3 that creates deadlock cycles involving one RCU
Tasks Trace step and L-1 SRCU steps. Please note that lockdep will not
detect these deadlocks until synchronize_rcu_tasks_trace() is marked
with lockdep's new "sync" annotation, which will probably not happen
until some time after these markings prove their worth on SRCU.
Please note that these tests are available only in kernels built with
CONFIG_TASKS_TRACE_RCU=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
In order to test the new SRCU-lockdep functionality, this commit adds
an rcutorture.test_srcu_lockdep module parameter that, when non-zero,
selects an SRCU deadlock scenario to execute. This parameter is a
five-digit number formatted as DNNL, where "D" is 1 to force a deadlock
and 0 to avoid doing so; "NN" is the test number, 0 for SRCU-based, 1
for SRCU/mutex-based, and 2 for SRCU/rwsem-based; and "L" is the number
of steps in the deadlock cycle.
Note that rcutorture.test_srcu_lockdep=1 will also force a hard hang.
If a non-zero value of rcutorture.test_srcu_lockdep does not select a
deadlock scenario, a console message is printed and testing continues.
[ paulmck: Apply kernel test robot feedback, add rwsem support. ]
[ paulmck: Apply Dan Carpenter feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Given a non-zero rcutorture.nocbs_nthreads module parameter, the specified
number of nocb kthreads will be created, regardless of whether or not
the RCU implementation under test is capable of offloading callbacks.
Please note that even vanilla RCU is incapable of offloading in kernels
built with CONFIG_RCU_NOCB_CPU=n. And when the RCU implementation is
incapable of offloading callbacks, there is no point in creating those
kthreads.
This commit therefore checks the cur_ops.torture_type module parameter and
CONFIG_RCU_NOCB_CPU Kconfig option in order to avoid creating unnecessary
nocb tasks.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ boqun: Fix checkpatch warning ]
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
After commit 8b700983de82 ("sched: Remove sched_set_*() return value"),
this variable is not used anymore. So eliminate it entirely.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
This commit adds a test_nmis module parameter to generate the
specified number of NMI stack backtraces 15 seconds apart. This module
parameter can be used to test NMI delivery and accompanying diagnostics.
Note that this parameter is ignored when rcutorture is a module rather
than built into the kernel. This could be changed with the addition of
an EXPORT_SYMBOL_GPL().
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
The sparse __acquires() and __releases() annotations provide very
little value. The argument is ignored, so sparse cannot tell the
differences between acquiring one lock and releasing another on the one
hand and acquiring and releasing a given lock on the other. In addition,
lockdep annotations provide much more precision, for but one example,
actually knowing which lock is held.
This commit therefore removes the __acquires() and __releases()
annotations from rcutorture.
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
call_rcu() changes to save power will change the behavior of rcutorture
tests. Use the call_rcu_hurry() API instead which reverts to the old
behavior.
[ paulmck: Apply s/call_rcu_flush/call_rcu_hurry/ feedback from Tejun Heo. ]
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On strict load-store architectures, the use of this_cpu_inc() by
srcu_read_lock() and srcu_read_unlock() is not NMI-safe in TREE SRCU.
To see this suppose that an NMI arrives in the middle of srcu_read_lock(),
just after it has read ->srcu_lock_count, but before it has written
the incremented value back to memory. If that NMI handler also does
srcu_read_lock() and srcu_read_lock() on that same srcu_struct structure,
then upon return from that NMI handler, the interrupted srcu_read_lock()
will overwrite the NMI handler's update to ->srcu_lock_count, but
leave unchanged the NMI handler's update by srcu_read_unlock() to
->srcu_unlock_count.
This can result in a too-short SRCU grace period, which can in turn
result in arbitrary memory corruption.
If the NMI handler instead interrupts the srcu_read_unlock(), this
can result in eternal SRCU grace periods, which is not much better.
This commit therefore creates a pair of new srcu_read_lock_nmisafe()
and srcu_read_unlock_nmisafe() functions, which allow SRCU readers in
both NMI handlers and in process and IRQ context. It is bad practice
to mix the existing and the new _nmisafe() primitives on the same
srcu_struct structure. Use one set or the other, not both.
Just to underline that "bad practice" point, using srcu_read_lock() at
process level and srcu_read_lock_nmisafe() in your NMI handler will not,
repeat NOT, work. If you do not immediately understand why this is the
case, please review the earlier paragraphs in this commit log.
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Apply feedback from Randy Dunlap. ]
[ paulmck: Apply feedback from John Ogness. ]
[ paulmck: Apply feedback from Frederic Weisbecker. ]
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
This commit adds code to the RTWS_POLL_GET case of rcu_torture_writer()
to verify that the value of NUM_ACTIVE_RCU_POLL_OLDSTATE is sufficiently
large
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds code to the RTWS_POLL_GET_FULL case
of rcu_torture_writer() to verify that the value of
NUM_ACTIVE_RCU_POLL_FULL_OLDSTATE is sufficiently large.
[ paulmck: Fix whitespace issue located by checkpatch.pl. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcutorture_oom_notify() function unconditionally invokes
rcu_barrier(), which is OK when the rcutorture.torture_type value is
"rcu", but unhelpful otherwise. The purpose of these barrier calls is to
wait for all outstanding callback-flooding callbacks to be invoked before
cleaning up their data. Using the wrong barrier function therefore
risks arbitrary memory corruption. Thus, this commit changes these
rcu_barrier() calls into cur_ops->cb_barrier() to make things work when
torturing non-vanilla flavors of RCU.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit brings the "srcud" (dynamically allocated) SRCU test in line
with the "srcu" (statically allocated) test, so that both test the full
SRCU polled grace-period API.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
RCU's polled grace-period API is reasonably lightweight, but still
contains heavyweight memory barriers. This commit therefore limits
testing of this API from rcutorture's readers in order to avoid the
false negatives that these heavyweight operations could provoke.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit expands the rcu_torture_write_types() function's first "if"
condition and body, placing one element per line, in order to make the
compiler's error messages more helpful.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit changes the use of gp_poll_exp to gp_poll_exp1 in the first
check in rcu_torture_write_types(). No functional effect, but consistency
is a good thing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that rcu_gp_oldstate can accurately track both normal and
expedited grace periods regardless of system state, rcutorture's
rcu_poll_need_2gp() function need only call for a second grace period
for the old single-unsigned-long grace-period polling APIs
This commit therefore adjusts rcu_poll_need_2gp() accordingly.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The cond_synchronize_rcu_expedited() API compresses the combined expedited and
normal grace-period states into a single unsigned long, which conserves
storage, but can miss grace periods in certain cases involving overlapping
normal and expedited grace periods. Missing the occasional grace period
is usually not a problem, but there are use cases that care about each
and every grace period.
This commit therefore adds yet another member of the full-state RCU
grace-period polling API, which is the cond_synchronize_rcu_exp_full()
function. This uses up to three times the storage (rcu_gp_oldstate
structure instead of unsigned long), but is guaranteed not to miss
grace periods.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The cond_synchronize_rcu() API compresses the combined expedited and
normal grace-period states into a single unsigned long, which conserves
storage, but can miss grace periods in certain cases involving overlapping
normal and expedited grace periods. Missing the occasional grace period
is usually not a problem, but there are use cases that care about each
and every grace period.
This commit therefore adds yet another member of the full-state RCU
grace-period polling API, which is the cond_synchronize_rcu_full()
function. This uses up to three times the storage (rcu_gp_oldstate
structure instead of unsigned long), but is guaranteed not to miss
grace periods.
[ paulmck: Apply feedback from kernel test robot and Julia Lawall. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The start_poll_synchronize_rcu_expedited() API compresses the combined
expedited and normal grace-period states into a single unsigned long,
which conserves storage, but can miss grace periods in certain cases
involving overlapping normal and expedited grace periods. Missing the
occasional grace period is usually not a problem, but there are use
cases that care about each and every grace period.
This commit therefore adds yet another member of the
full-state RCU grace-period polling API, which is the
start_poll_synchronize_rcu_expedited_full() function. This uses up to
three times the storage (rcu_gp_oldstate structure instead of unsigned
long), but is guaranteed not to miss grace periods.
[ paulmck: Apply feedback from kernel test robot and Julia Lawall. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The start_poll_synchronize_rcu() API compresses the combined expedited and
normal grace-period states into a single unsigned long, which conserves
storage, but can miss grace periods in certain cases involving overlapping
normal and expedited grace periods. Missing the occasional grace period
is usually not a problem, but there are use cases that care about each
and every grace period.
This commit therefore adds the next member of the full-state RCU
grace-period polling API, namely the start_poll_synchronize_rcu_full()
function. This uses up to three times the storage (rcu_gp_oldstate
structure instead of unsigned long), but is guaranteed not to miss
grace periods.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds full-state polling checks to accompany the old-style
polling checks in the rcu_torture_one_read() function. If a polling
cycle within an RCU reader completes, a WARN_ONCE() is triggered.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This check does nothing because the state at this point in the code
because the rcu_torture_writer_state value is guaranteed to instead
be RTWS_REPLACE. This commit therefore removes this check.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a test to rcu_torture_writer() that verifies that a
->get_gp_state_full() and ->poll_gp_state_full() polled grace-period
sequence does not claim that a grace period elapsed within the confines
of the corresponding read-side critical section.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Only vanilla RCU needs a double grace period for its compressed
polled grace-period old-state cookie. This commit therefore adds an
rcu_torture_ops per-flavor function ->poll_need_2gp to allow this check
to be adapted to the RCU flavor under test. A NULL pointer for this
function says that doubled grace periods are never needed.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit abstracts a do_rtws_sync() function that does synchronous
grace-period testing, but also testing the polled API 25% of the time
each for the normal and full-state variants of the polled API.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The get_state_synchronize_rcu() API compresses the combined expedited and
normal grace-period states into a single unsigned long, which conserves
storage, but can miss grace periods in certain cases involving overlapping
normal and expedited grace periods. Missing the occasional grace period
is usually not a problem, but there are use cases that care about each
and every grace period.
This commit therefore adds the next member of the full-state RCU
grace-period polling API, namely the get_state_synchronize_rcu_full()
function. This uses up to three times the storage (rcu_gp_oldstate
structure instead of unsigned long), but is guaranteed not to miss
grace periods.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The get_completed_synchronize_rcu() and poll_state_synchronize_rcu()
APIs compress the combined expedited and normal grace-period states into a
single unsigned long, which conserves storage, but can miss grace periods
in certain cases involving overlapping normal and expedited grace periods.
Missing the occasional grace period is usually not a problem, but there
are use cases that care about each and every grace period.
This commit therefore adds the first members of the full-state RCU
grace-period polling API, namely the get_completed_synchronize_rcu_full()
and poll_state_synchronize_rcu_full() functions. These use up to three
times the storage (rcu_gp_oldstate structure instead of unsigned long),
but which are guaranteed not to miss grace periods, at least in situations
where the single-CPU grace-period optimization does not apply.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes rcu_torture_writer() to use WARN_ON_ONCE() to check
that the cookie returned by the current RCU flavor's ->get_gp_state()
function (get_state_synchronize_rcu() for vanilla RCU) causes that
flavor's ->poll_gp_state function (poll_state_synchronize_rcu() for
vanilla RCU) to unconditionally return true.
Note that a pair calls to synchronous grace-period-wait functions are
used. This is necessary to account for partially overlapping normal and
expedited grace periods aligning in just the wrong way with polled API
invocations, which can cause those polled API invocations to ignore one or
the other of those partially overlapping grace periods. It is unlikely
that this sort of ignored grace period will be a problem in production,
but rcutorture can make it happen quite within a few tens of seconds.
This commit is in preparation for polled expedited grace periods.
[ paulmck: Apply feedback from Frederic Weisbecker. ]
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds warnings for allocation failure during the mem_dump_obj()
tests. It also terminates these tests upon such failure.
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The RCU priority boosting can fail in two situations:
1) If (nr_cpus= > maxcpus=), which means if the total number of CPUs
is higher than those brought online at boot, then torture_onoff() may
later bring up CPUs that weren't online on boot. Now since rcutorture
initialization only boosts the ksoftirqds of the CPUs that have been
set online on boot, the CPUs later set online by torture_onoff won't
benefit from the boost, making RCU priority boosting fail.
2) The ksoftirqd kthreads are boosted after the creation of
rcu_torture_boost() kthreads, which opens a window large enough for these
rcu_torture_boost() kthreads to wait (despite running at FIFO priority)
for ksoftirqds that are still running at SCHED_NORMAL priority.
The issues can trigger for example with:
./kvm.sh --configs TREE01 --kconfig "CONFIG_RCU_BOOST=y"
[ 34.968561] rcu-torture: !!!
[ 34.968627] ------------[ cut here ]------------
[ 35.014054] WARNING: CPU: 4 PID: 114 at kernel/rcu/rcutorture.c:1979 rcu_torture_stats_print+0x5ad/0x610
[ 35.052043] Modules linked in:
[ 35.069138] CPU: 4 PID: 114 Comm: rcu_torture_sta Not tainted 5.18.0-rc1 #1
[ 35.096424] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
[ 35.154570] RIP: 0010:rcu_torture_stats_print+0x5ad/0x610
[ 35.198527] Code: 63 1b 02 00 74 02 0f 0b 48 83 3d 35 63 1b 02 00 74 02 0f 0b 48 83 3d 21 63 1b 02 00 74 02 0f 0b 48 83 3d 0d 63 1b 02 00 74 02 <0f> 0b 83 eb 01 0f 8e ba fc ff ff 0f 0b e9 b3 fc ff f82
[ 37.251049] RSP: 0000:ffffa92a0050bdf8 EFLAGS: 00010202
[ 37.277320] rcu: De-offloading 8
[ 37.290367] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001
[ 37.290387] RDX: 0000000000000000 RSI: 00000000ffffbfff RDI: 00000000ffffffff
[ 37.290398] RBP: 000000000000007b R08: 0000000000000000 R09: c0000000ffffbfff
[ 37.290407] R10: 000000000000002a R11: ffffa92a0050bc18 R12: ffffa92a0050be20
[ 37.290417] R13: ffffa92a0050be78 R14: 0000000000000000 R15: 000000000001bea0
[ 37.290427] FS: 0000000000000000(0000) GS:ffff96045eb00000(0000) knlGS:0000000000000000
[ 37.290448] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 37.290460] CR2: 0000000000000000 CR3: 000000001dc0c000 CR4: 00000000000006e0
[ 37.290470] Call Trace:
[ 37.295049] <TASK>
[ 37.295065] ? preempt_count_add+0x63/0x90
[ 37.295095] ? _raw_spin_lock_irqsave+0x12/0x40
[ 37.295125] ? rcu_torture_stats_print+0x610/0x610
[ 37.295143] rcu_torture_stats+0x29/0x70
[ 37.295160] kthread+0xe3/0x110
[ 37.295176] ? kthread_complete_and_exit+0x20/0x20
[ 37.295193] ret_from_fork+0x22/0x30
[ 37.295218] </TASK>
Fix this with boosting the ksoftirqds kthreads from the boosting
hotplug callback itself and before the boosting kthreads are created.
Fixes: ea6d962e80b6 ("rcutorture: Judge RCU priority boosting on grace periods, not callbacks")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The loop scanning the pipesummary[] array currently skips the last
element, which means that the diagnostics ignore those rarest of
situations, namely where some readers persist across more than ten
grace periods, but all other readers avoid spanning a full grace period.
This commit therefore adjusts the scan to include the last element of
this array.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kernel memory leak detector located the following:
unreferenced object 0xffff95d941135b50 (size 16):
comm "swapper/0", pid 1, jiffies 4294667610 (age 1367.451s)
hex dump (first 16 bytes):
f0 c6 c2 bd d9 95 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000bc81d9b1>] kmem_cache_alloc_trace+0x2f6/0x500
[<00000000d28be229>] rcu_torture_init+0x1235/0x1354
[<0000000032c3acd9>] do_one_initcall+0x51/0x210
[<000000003c117727>] kernel_init_freeable+0x205/0x259
[<000000003961f965>] kernel_init+0x1a/0x120
[<000000001998f890>] ret_from_fork+0x22/0x30
This is caused by the rcu_test_debug_objects() function allocating an
rcu_head structure, then failing to free it. This commit therefore adds
the needed kfree() after the last use of this structure.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The existing loop has an implicit manual loop that obscures the flow
and requires an extra control variable. This commit makes this implicit
loop explicit, thus saving several lines of code.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Dumping a big ftrace buffer could lead to a RCU stall. So there is the
ftrace buffer and the stall information which needs to be printed. When
there is additionally a WARN_ON() which describes the reason for the ftrace
buffer dump and the WARN_ON() is executed _after_ ftrace buffer dump, the
information get lost in the middle of the RCU stall information.
Therefore print WARN_ON() message before dumping the ftrace buffer in
rcu_torture_writer().
[ paulmck: Add tracing_off() to avoid cruft from WARN(). ]
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reviewed-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit updates the rcutorture.fwd_progress help text to say that
it is the number of forward-progress kthreads to spawn rather than the
old enable/disable functionality. While in the area, make the list of
torture-test parameters easier to read by taking advantage of 100 columns.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
