Initially, xdp_frame::mem.id was used to search for the corresponding
&page_pool to return the page correctly.
However, after that struct page was extended to have a direct pointer
to its PP (netmem has it as well), further keeping of this field makes
no sense. xdp_return_frame_bulk() still used it to do a lookup, and
this leftover is now removed.
Remove xdp_frame::mem and replace it with ::mem_type, as only memory
type still matters and we need to know it to be able to free the frame
correctly.
As a cute side effect, we can now make every scalar field in &xdp_frame
of 4 byte width, speeding up accesses to them.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The main reason for this change was to allow mixing pages from different
&page_pools within one &xdp_buff/&xdp_frame. Why not? With stuff like
devmem and io_uring zerocopy Rx, it's required to have separate PPs for
header buffers and payload buffers.
Adjust xdp_return_frame_bulk() and page_pool_put_netmem_bulk(), so that
they won't be tied to a particular pool. Let the latter create a
separate bulk of pages which's PP is different from the first netmem of
the bulk and process it after the main loop.
This greatly optimizes xdp_return_frame_bulk(): no more hashtable
lookups and forced flushes on PP mismatch. Also make
xdp_flush_frame_bulk() inline, as it's just one if + function call + one
u32 read, not worth extending the call ladder.
Co-developed-by: Toke Høiland-Jørgensen <toke@redhat.com> # iterative
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org> # while (count)
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add three qdisc-specific drop reasons and use them in sch_cake:
1) SKB_DROP_REASON_QDISC_OVERLIMIT
Whenever the total queue limit for a qdisc instance is exceeded
and a packet is dropped to make room.
2) SKB_DROP_REASON_QDISC_CONGESTED
Whenever a packet is dropped by the qdisc AQM algorithm because
congestion is detected.
3) SKB_DROP_REASON_CAKE_FLOOD
Whenever a packet is dropped by the flood protection part of the
CAKE AQM algorithm (BLUE).
Also use the existing SKB_DROP_REASON_QUEUE_PURGE in cake_clear_tin().
Reasons show up as:
perf record -a -e skb:kfree_skb sleep 1; perf script
iperf3 665 [005] 848.656964: skb:kfree_skb: skbaddr=0xffff98168a333500 rx_sk=(nil) protocol=34525 location=__dev_queue_xmit+0x10f0 reason: QDISC_OVERLIMIT
swapper 0 [001] 909.166055: skb:kfree_skb: skbaddr=0xffff98168280cee0 rx_sk=(nil) protocol=34525 location=cake_dequeue+0x5ef reason: QDISC_CONGESTED
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241211-cake-drop-reason-v2-1-920afadf4d1b@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - fix to a fix:
- rtnetlink: fix error code in rtnl_newlink()
- tipc: fix NULL deref in cleanup_bearer()
Current release - regressions:
- ip: fix warning about invalid return from in ip_route_input_rcu()
Current release - new code bugs:
- udp: fix L4 hash after reconnect
- eth: lan969x: fix cyclic dependency between modules
- eth: bnxt_en: fix potential crash when dumping FW log coredump
Previous releases - regressions:
- wifi: mac80211:
- fix a queue stall in certain cases of channel switch
- wake the queues in case of failure in resume
- splice: do not checksum AF_UNIX sockets
- virtio_net: fix BUG()s in BQL support due to incorrect accounting
of purged packets during interface stop
- eth: stmmac: fix TSO DMA API mis-usage causing oops
- eth: bnxt_en: fixes for HW GRO: GSO type on 5750X chips and
oops due to incorrect aggregation ID mask on 5760X chips
Previous releases - always broken:
- Bluetooth: improve setsockopt() handling of malformed user input
- eth: ocelot: fix PTP timestamping in presence of packet loss
- ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply
not supported
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TDKt
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter and wireless.
Current release - fix to a fix:
- rtnetlink: fix error code in rtnl_newlink()
- tipc: fix NULL deref in cleanup_bearer()
Current release - regressions:
- ip: fix warning about invalid return from in ip_route_input_rcu()
Current release - new code bugs:
- udp: fix L4 hash after reconnect
- eth: lan969x: fix cyclic dependency between modules
- eth: bnxt_en: fix potential crash when dumping FW log coredump
Previous releases - regressions:
- wifi: mac80211:
- fix a queue stall in certain cases of channel switch
- wake the queues in case of failure in resume
- splice: do not checksum AF_UNIX sockets
- virtio_net: fix BUG()s in BQL support due to incorrect accounting
of purged packets during interface stop
- eth:
- stmmac: fix TSO DMA API mis-usage causing oops
- bnxt_en: fixes for HW GRO: GSO type on 5750X chips and oops
due to incorrect aggregation ID mask on 5760X chips
Previous releases - always broken:
- Bluetooth: improve setsockopt() handling of malformed user input
- eth: ocelot: fix PTP timestamping in presence of packet loss
- ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply not
supported"
* tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: dsa: tag_ocelot_8021q: fix broken reception
net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries
net: renesas: rswitch: fix initial MPIC register setting
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
team: Fix initial vlan_feature set in __team_compute_features
bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
bonding: Fix initial {vlan,mpls}_feature set in bond_compute_features
net, team, bonding: Add netdev_base_features helper
net/sched: netem: account for backlog updates from child qdisc
net: dsa: felix: fix stuck CPU-injected packets with short taprio windows
splice: do not checksum AF_UNIX sockets
net: usb: qmi_wwan: add Telit FE910C04 compositions
...
- SCO: Fix transparent voice setting
- ISO: Locking fixes
- hci_core: Fix sleeping function called from invalid context
- hci_event: Fix using rcu_read_(un)lock while iterating
- btmtk: avoid UAF in btmtk_process_coredump
-----BEGIN PGP SIGNATURE-----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=1Po/
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- SCO: Fix transparent voice setting
- ISO: Locking fixes
- hci_core: Fix sleeping function called from invalid context
- hci_event: Fix using rcu_read_(un)lock while iterating
- btmtk: avoid UAF in btmtk_process_coredump
* tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
Bluetooth: Improve setsockopt() handling of malformed user input
====================
Link: https://patch.msgid.link/20241212142806.2046274-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit changed the dsa_8021q_rcv() calling convention to
accept pre-populated source_port and switch_id arguments. If those are
not available, as in the case of tag_ocelot_8021q, the arguments must be
pre-initialized with -1.
Due to the bug of passing uninitialized arguments in tag_ocelot_8021q,
dsa_8021q_rcv() does not detect that it needs to populate the
source_port and switch_id, and this makes dsa_conduit_find_user() fail,
which leads to packet loss on reception.
Fixes: dcfe767378 ("net: dsa: tag_sja1105: absorb logic for not overwriting precise info into dsa_8021q_rcv()")
Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241211144741.1415758-1-robert.hodaszi@digi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 8d7ae22ae9 ("net: dsa: microchip: KSZ9477 register regmap
alignment to 32 bit boundaries") fixed an issue whereby regmap_reg_range
did not allow writes as 32 bit words to KSZ9477 PHY registers, this fix
for KSZ9896 is adapted from there as the same errata is present in
KSZ9896C as "Module 5: Certain PHY registers must be written as pairs
instead of singly" the explanation below is likewise taken from this
commit.
The commit provided code
to apply "Module 6: Certain PHY registers must be written as pairs instead
of singly" errata for KSZ9477 as this chip for certain PHY registers
(0xN120 to 0xN13F, N=1,2,3,4,5) must be accessed as 32 bit words instead
of 16 or 8 bit access.
Otherwise, adjacent registers (no matter if reserved or not) are
overwritten with 0x0.
Without this patch some registers (e.g. 0x113c or 0x1134) required for 32
bit access are out of valid regmap ranges.
As a result, following error is observed and KSZ9896 is not properly
configured:
ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO
ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO
ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO
ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0
The solution is to modify regmap_reg_range to allow accesses with 4 bytes
boundaries.
Fixes: 5c844d57aa ("net: dsa: microchip: fix writes to phy registers >= 0x10")
Signed-off-by: Jesse Van Gavere <jesse.vangavere@scioteq.com>
Link: https://patch.msgid.link/20241211092932.26881-1-jesse.vangavere@scioteq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPIC.PIS must be set per phy interface type.
MPIC.LSC must be set per speed.
Do that strictly per datasheet, instead of hardcoding MPIC.PIS to GMII.
Fixes: 3590918b5d ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20241211053012.368914-1-nikita.yoush@cogentembedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hci_devcd_append may lead to the release of the skb, so it cannot be
accessed once it is called.
==================================================================
BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk]
Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82
CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c
Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024
Workqueue: events btusb_rx_work [btusb]
Call Trace:
<TASK>
dump_stack_lvl+0xfd/0x150
print_report+0x131/0x780
kasan_report+0x177/0x1c0
btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01]
btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 82:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
__kasan_slab_alloc+0x4e/0x60
kmem_cache_alloc+0x19f/0x360
skb_clone+0x132/0xf70
btusb_recv_acl_mtk+0x104/0x1a0 [btusb]
btusb_rx_work+0x9e/0xe0 [btusb]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
Freed by task 1733:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
kasan_save_free_info+0x28/0xb0
____kasan_slab_free+0xfd/0x170
kmem_cache_free+0x183/0x3f0
hci_devcd_rx+0x91a/0x2060 [bluetooth]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
The buggy address belongs to the object at ffff888033cfab40
which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 112 bytes inside of
freed 232-byte region [ffff888033cfab40, ffff888033cfac28)
The buggy address belongs to the physical page:
page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa
head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0x4000000000000840(slab|head|zone=1)
page_type: 0xffffffff()
raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001
raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Check if we need to call hci_devcd_complete before calling
hci_devcd_append. That requires that we check data->cd_info.cnt >=
MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we
increment data->cd_info.cnt only once the call to hci_devcd_append
succeeds.
Fixes: 0b70151328 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The voice setting is used by sco_connect() or sco_conn_defer_accept()
after being set by sco_sock_setsockopt().
The PCM part of the voice setting is used for offload mode through PCM
chipset port.
This commits add support for mSBC 16 bits offloading, i.e. audio data
not transported over HCI.
The BCM4349B1 supports 16 bits transparent data on its I2S port.
If BT_VOICE_TRANSPARENT is used when accepting a SCO connection, this
gives only garbage audio while using BT_VOICE_TRANSPARENT_16BIT gives
correct audio.
This has been tested with connection to iPhone 14 and Samsung S24.
Fixes: ad10b1a487 ("Bluetooth: Add Bluetooth socket voice option")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This updates iso_sock_accept to use nested locking for the parent
socket, to avoid lockdep warnings caused because the parent and
child sockets are locked by the same thread:
[ 41.585683] ============================================
[ 41.585688] WARNING: possible recursive locking detected
[ 41.585694] 6.12.0-rc6+ #22 Not tainted
[ 41.585701] --------------------------------------------
[ 41.585705] iso-tester/3139 is trying to acquire lock:
[ 41.585711] ffff988b29530a58 (sk_lock-AF_BLUETOOTH)
at: bt_accept_dequeue+0xe3/0x280 [bluetooth]
[ 41.585905]
but task is already holding lock:
[ 41.585909] ffff988b29533a58 (sk_lock-AF_BLUETOOTH)
at: iso_sock_accept+0x61/0x2d0 [bluetooth]
[ 41.586064]
other info that might help us debug this:
[ 41.586069] Possible unsafe locking scenario:
[ 41.586072] CPU0
[ 41.586076] ----
[ 41.586079] lock(sk_lock-AF_BLUETOOTH);
[ 41.586086] lock(sk_lock-AF_BLUETOOTH);
[ 41.586093]
*** DEADLOCK ***
[ 41.586097] May be due to missing lock nesting notation
[ 41.586101] 1 lock held by iso-tester/3139:
[ 41.586107] #0: ffff988b29533a58 (sk_lock-AF_BLUETOOTH)
at: iso_sock_accept+0x61/0x2d0 [bluetooth]
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since hci_get_route holds the device before returning, the hdev
should be released with hci_dev_put at the end of iso_listen_bis
even if the function returns with an error.
Fixes: 02171da6e8 ("Bluetooth: ISO: Add hcon for listening bis sk")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The usage of rcu_read_(un)lock while inside list_for_each_entry_rcu is
not safe since for the most part entries fetched this way shall be
treated as rcu_dereference:
Note that the value returned by rcu_dereference() is valid
only within the enclosing RCU read-side critical section [1]_.
For example, the following is **not** legal::
rcu_read_lock();
p = rcu_dereference(head.next);
rcu_read_unlock();
x = p->address; /* BUG!!! */
rcu_read_lock();
y = p->data; /* BUG!!! */
rcu_read_unlock();
Fixes: a0bfde167b ("Bluetooth: ISO: Add support for connecting multiple BISes")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
AF_INET6 is not supported for smc-r v2 client before, even if the
ipv6 addr is ipv4 mapped. Thus, when using AF_INET6, smc-r connection
will fallback to tcp, especially for java applications running smc-r.
This patch support ipv4 mapped ipv6 addr client for smc-r v2. Clients
using real global ipv6 addr is still not supported yet.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For SMC-R V2, llc msg can be larger than SMC_WR_BUF_SIZE, thus every
recv wr has 2 sges, the first sge with length SMC_WR_BUF_SIZE is for
V1/V2 compatible llc/cdc msg, and the second sge with length
SMC_WR_BUF_V2_SIZE-SMC_WR_TX_SIZE is for V2 specific llc msg, like
SMC_LLC_DELETE_RKEY and SMC_LLC_ADD_LINK for SMC-R V2. The memory
buffer in the second sge is shared by all recv wr in one link and
all link in one lgr for saving memory usage purpose.
But not all RDMA devices with max_recv_sge greater than 1. Thus SMC-R
V2 can not support on such RDMA devices and SMC_CLC_DECL_INTERR fallback
happens because of the failure of create qp.
This patch introduce the support for SMC-R V2 on RDMA devices with
max_recv_sge equals to 1. Every recv wr has only one sge with individual
buffer whose size is SMC_WR_BUF_V2_SIZE once the RDMA device's max_recv_sge
equals to 1. It may use more memory, but it is better than
SMC_CLC_DECL_INTERR fallback.
Co-developed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=JEfQ
-----END PGP SIGNATURE-----
Merge tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix bogus test reports in rpath.sh selftest by adding permanent
neighbor entries, from Phil Sutter.
2) Lockdep reports possible ABBA deadlock in xt_IDLETIMER, fix it by
removing sysfs out of the mutex section, also from Phil Sutter.
3) It is illegal to release basechain via RCU callback, for several
reasons. Keep it simple and safe by calling synchronize_rcu() instead.
This is a partially reverting a botched recent attempt of me to fix
this basechain release path on netdevice removal.
From Florian Westphal.
netfilter pull request 24-12-11
* tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: do not defer rule destruction via call_rcu
netfilter: IDLETIMER: Fix for possible ABBA deadlock
selftests: netfilter: Stabilize rpath.sh
====================
Link: https://patch.msgid.link/20241211230130.176937-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Historically, DSA drivers have seen problems with the model in which
bridge VLANs work, particularly with them being offloaded to switchdev
asynchronously relative to when they become active (vlan_filtering=1).
This switchdev API peculiarity was papered over by commit 2ea7a679ca
("net: dsa: Don't add vlans when vlan filtering is disabled"), which
introduced other problems, fixed by commit 54a0ed0df4 ("net: dsa:
provide an option for drivers to always receive bridge VLANs") through
an opt-in ds->configure_vlan_while_not_filtering bool (which later
became an opt-out).
The point is that some DSA drivers still skip VLAN configuration while
VLAN-unaware, and there is a desire to get rid of that behavior.
It's hard to deduce from the wording "at least one corner case" what
Andrew saw, but my best guess is that there is a discrepancy of meaning
between bridge pvid and hardware port pvid which caused breakage.
On one side, the Linux bridge with vlan_filtering=0 is completely
VLAN-unaware, and will accept and process a packet the same way
irrespective of the VLAN groups on the ports or the bridge itself
(there may not even be a pvid, and this makes no difference).
On the other hand, DSA switches still do VLAN processing internally,
even with vlan_filtering disabled, but they are expected to classify all
packets to the port pvid. That pvid shouldn't be confused with the
bridge pvid, and there lies the problem.
When a switch port is under a VLAN-unaware bridge, the hardware pvid
must be explicitly managed by the driver to classify all received
packets to it, regardless of bridge VLAN groups. When under a VLAN-aware
bridge, the hardware pvid must be synchronized to the bridge port pvid.
To do this correctly, the pattern is unfortunately a bit complicated,
and involves hooking the pvid change logic into quite a few places
(the ones that change the input variables which determine the value to
use as hardware pvid for a port). See mv88e6xxx_port_commit_pvid(),
sja1105_commit_pvid(), ocelot_port_set_pvid() etc.
The point is that not all drivers used to do that, especially in older
kernels. If a driver is to blindly program a bridge pvid VLAN received
from switchdev while it's VLAN-unaware, this might in turn change the
hardware pvid used by a VLAN-unaware bridge port, which might result in
packet loss depending which other ports have that pvid too (in that same
note, it might also go unnoticed).
To capture that condition, it is sufficient to take a VLAN-unaware
bridge and change the [VLAN-aware] bridge pvid on a single port, to a
VID that isn't present on any other port. This shouldn't have absolutely
any effect on packet classification or forwarding. However, broken
drivers will take the bait, and change their PVID to 3, causing packet
loss.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241210233541.1401837-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Shannon Nelson says:
====================
ionic: minor code updates
These are a few updates to the ionic driver, mostly for handling
newer/faster QSFP connectors.
====================
Link: https://patch.msgid.link/20241210183045.67878-1-shannon.nelson@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Teach the driver to recognize and decode the sfp pid
SFF8024_ID_QSFP_PLUS_CMIS correctly.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add higher speed defines to the ionic_if.h API and decode them
in the ethtool get_link_ksettings callback.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of reporting -EINVAL when IONIC_RC_ENOSUPP is returned use
the -EOPNOTSUPP value. This aligns better since the FW only returns
IONIC_RC_ENOSUPP when operations aren't supported not when invalid
values are used.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace when ETH_HLEN and VLAN_HLEN are used together with
VLAN_ETH_HLEN since it's the same value and uses 1 define
instead of 2.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that the firmware has learned how to properly report
the asic type id, add the values to our interface file.
The sharp-eyed reviewers will catch that the CAPRI value
changed here from 0 to 1. This comes with the FW actually
defining it correctly. This is safe for us to change as
nothing actually uses that value yet.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to bonding driver, add NETIF_F_GSO_ENCAP_ALL to TEAM_VLAN_FEATURES
in order to support slave devices which propagate NETIF_F_GSO_UDP_TUNNEL &
NETIF_F_GSO_UDP_TUNNEL_CSUM as vlan_features.
Fixes: 3625920b62 ("teaming: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-5-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similarly as with bonding, fix the calculation of vlan_features to reuse
netdev_base_features() in order derive the set in the same way as
ndo_fix_features before iterating through the slave devices to refine the
feature set.
Fixes: 3625920b62 ("teaming: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-4-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Drivers like mlx5 expose NIC's vlan_features such as
NETIF_F_GSO_UDP_TUNNEL & NETIF_F_GSO_UDP_TUNNEL_CSUM which are
later not propagated when the underlying devices are bonded and
a vlan device created on top of the bond.
Right now, the more cumbersome workaround for this is to create
the vlan on top of the mlx5 and then enslave the vlan devices
to a bond.
To fix this, add NETIF_F_GSO_ENCAP_ALL to BOND_VLAN_FEATURES
such that bond_compute_features() can probe and propagate the
vlan_features from the slave devices up to the vlan device.
Given the following bond:
# ethtool -i enp2s0f{0,1}np{0,1}
driver: mlx5_core
[...]
# ethtool -k enp2s0f0np0 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: on
rx-udp-gro-forwarding: off
# ethtool -k enp2s0f1np1 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: on
rx-udp-gro-forwarding: off
# ethtool -k bond0 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: off [fixed]
rx-udp-gro-forwarding: off
Before:
# ethtool -k bond0.100 | grep udp
tx-udp_tnl-segmentation: off [requested on]
tx-udp_tnl-csum-segmentation: off [requested on]
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: off [fixed]
rx-udp-gro-forwarding: off
After:
# ethtool -k bond0.100 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: off [fixed]
rx-udp-gro-forwarding: off
Various users have run into this reporting performance issues when
configuring Cilium in vxlan tunneling mode and having the combination
of bond & vlan for the core devices connecting the Kubernetes cluster
to the outside world.
Fixes: a9b3ace44c ("bonding: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-3-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If a bonding device has slave devices, then the current logic to derive
the feature set for the master bond device is limited in that flags which
are fully supported by the underlying slave devices cannot be propagated
up to vlan devices which sit on top of bond devices. Instead, these get
blindly masked out via current NETIF_F_ALL_FOR_ALL logic.
vlan_features and mpls_features should reuse netdev_base_features() in
order derive the set in the same way as ndo_fix_features before iterating
through the slave devices to refine the feature set.
Fixes: a9b3ace44c ("bonding: fix vlan_features computing")
Fixes: 2e770b507c ("net: bonding: Inherit MPLS features from slave devices")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-2-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Both bonding and team driver have logic to derive the base feature
flags before iterating over their slave devices to refine the set
via netdev_increment_features().
Add a small helper netdev_base_features() so this can be reused
instead of having it open-coded multiple times.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241210141245.327886-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Russell King says:
====================
net: dsa: cleanup EEE (part 1)
First part of DSA EEE cleanups.
Patch 1 removes a useless test that is always false. dp->pl will always
be set for user ports, so !dp->pl in the EEE methods will always be
false.
Patch 2 adds support for a new DSA support_eee() method, which tells
DSA whether the DSA driver supports EEE, and thus whether the ethtool
set_eee() and get_eee() methods should return -EOPNOTSUPP.
Patch 3 adds a trivial implementation for this new method which
indicates that EEE is supported.
Patches 4..8 adds implementations for .supports_eee() to all drivers
that support EEE in some form.
Patch 9 switches the core DSA code to require a .supports_eee()
implementation if DSA is supported. Any DSA driver that doesn't
implement this method after this patch will not support the ethtool
EEE methods.
Part 2 will remove the (now) useless .get_mac_eee() DSA operation.
====================
Link: https://patch.msgid.link/Z1hNkEb13FMuDQiY@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have updated all drivers, switch DSA to require an
implementation of the .support_eee() method for EEE to be usable,
rather than defaulting to being permissive when not implemented.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL14e-006cZy-AT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the .support_eee() method by reusing the ksz_validate_eee()
method as a template, renaming the function, changing the return type
and values, and removing it from the ksz_set_mac_eee() and
ksz_get_mac_eee() methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL14Z-006cZs-6o@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the .support_eee() method by using the generic helper as all
user ports support EEE.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL14U-006cZm-2K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the .support_eee() method by using the generic helper as all
user ports support EEE.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL14O-006cZg-VM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the .support_eee() method by using the generic helper as all
user ports support EEE.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL14J-006cZa-Rh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the .support_eee() method to indicate that EEE is not
supported by two switch variants, rather than making these checks in
the .set_mac_eee() and .get_mac_eee() methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL14E-006cZU-Nc@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide a trivial implementation for the .support_eee() method which
switch drivers can use to simply indicate that they support EEE on
all their user ports.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL149-006cZJ-JJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a hook to determine whether the switch supports EEE. This will
return false if the switch does not, or true if it does. If the
method is not implemented, we assume (currently) that the switch
supports EEE.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL144-006cZD-El@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When user ports are initialised, a phylink instance is always created,
and so dp->pl will always be non-NULL. The EEE methods are only used
for user ports, so checking for dp->pl to be NULL makes no sense. No
other phylink-calling method implements similar checks in DSA. Remove
this unnecessary check.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL13z-006cZ7-BZ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In general, 'qlen' of any classful qdisc should keep track of the
number of packets that the qdisc itself and all of its children holds.
In case of netem, 'qlen' only accounts for the packets in its internal
tfifo. When netem is used with a child qdisc, the child qdisc can use
'qdisc_tree_reduce_backlog' to inform its parent, netem, about created
or dropped SKBs. This function updates 'qlen' and the backlog statistics
of netem, but netem does not account for changes made by a child qdisc.
'qlen' then indicates the wrong number of packets in the tfifo.
If a child qdisc creates new SKBs during enqueue and informs its parent
about this, netem's 'qlen' value is increased. When netem dequeues the
newly created SKBs from the child, the 'qlen' in netem is not updated.
If 'qlen' reaches the configured sch->limit, the enqueue function stops
working, even though the tfifo is not full.
Reproduce the bug:
Ensure that the sender machine has GSO enabled. Configure netem as root
qdisc and tbf as its child on the outgoing interface of the machine
as follows:
$ tc qdisc add dev <oif> root handle 1: netem delay 100ms limit 100
$ tc qdisc add dev <oif> parent 1:0 tbf rate 50Mbit burst 1542 latency 50ms
Send bulk TCP traffic out via this interface, e.g., by running an iPerf3
client on the machine. Check the qdisc statistics:
$ tc -s qdisc show dev <oif>
Statistics after 10s of iPerf3 TCP test before the fix (note that
netem's backlog > limit, netem stopped accepting packets):
qdisc netem 1: root refcnt 2 limit 1000 delay 100ms
Sent 2767766 bytes 1848 pkt (dropped 652, overlimits 0 requeues 0)
backlog 4294528236b 1155p requeues 0
qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms
Sent 2767766 bytes 1848 pkt (dropped 327, overlimits 7601 requeues 0)
backlog 0b 0p requeues 0
Statistics after the fix:
qdisc netem 1: root refcnt 2 limit 1000 delay 100ms
Sent 37766372 bytes 24974 pkt (dropped 9, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms
Sent 37766372 bytes 24974 pkt (dropped 327, overlimits 96017 requeues 0)
backlog 0b 0p requeues 0
tbf segments the GSO SKBs (tbf_segment) and updates the netem's 'qlen'.
The interface fully stops transferring packets and "locks". In this case,
the child qdisc and tfifo are empty, but 'qlen' indicates the tfifo is at
its limit and no more packets are accepted.
This patch adds a counter for the entries in the tfifo. Netem's 'qlen' is
only decreased when a packet is returned by its dequeue function, and not
during enqueuing into the child qdisc. External updates to 'qlen' are thus
accounted for and only the behavior of the backlog statistics changes. As
in other qdiscs, 'qlen' then keeps track of how many packets are held in
netem and all of its children. As before, sch->limit remains as the
maximum number of packets in the tfifo. The same applies to netem's
backlog statistics.
Fixes: 50612537e9 ("netem: fix classful handling")
Signed-off-by: Martin Ottens <martin.ottens@fau.de>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20241210131412.1837202-1-martin.ottens@fau.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix TT unitialized data and size limit issues, by Remi Pommarel
(3 patches)
-----BEGIN PGP SIGNATURE-----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=T2LN
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20241210' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- fix TT unitialized data and size limit issues, by Remi Pommarel
(3 patches)
* tag 'batadv-net-pullrequest-20241210' of git://git.open-mesh.org/linux-merge:
batman-adv: Do not let TT changes list grows indefinitely
batman-adv: Remove uninitialized data in full table TT response
batman-adv: Do not send uninitialized TT changes
====================
Link: https://patch.msgid.link/20241210135024.39068-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With this port schedule:
tc qdisc replace dev $send_if parent root handle 100 taprio \
num_tc 8 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
map 0 1 2 3 4 5 6 7 \
base-time 0 cycle-time 10000 \
sched-entry S 01 1250 \
sched-entry S 02 1250 \
sched-entry S 04 1250 \
sched-entry S 08 1250 \
sched-entry S 10 1250 \
sched-entry S 20 1250 \
sched-entry S 40 1250 \
sched-entry S 80 1250 \
flags 2
ptp4l would fail to take TX timestamps of Pdelay_Resp messages like this:
increasing tx_timestamp_timeout may correct this issue, but it is likely caused by a driver bug
ptp4l[4134.168]: port 2: send peer delay response failed
It turns out that the driver can't take their TX timestamps because it
can't transmit them in the first place. And there's nothing special
about the Pdelay_Resp packets - they're just regular 68 byte packets.
But with this taprio configuration, the switch would refuse to send even
the ETH_ZLEN minimum packet size.
This should have definitely not been the case. When applying the taprio
config, the driver prints:
mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
and thus, everything under 132 bytes - ETH_FCS_LEN should have been sent
without problems. Yet it's not.
For the forwarding path, the configuration is fine, yet packets injected
from Linux get stuck with this schedule no matter what.
The first hint that the static guard bands are the cause of the problem
is that reverting Michael Walle's commit 297c4de6f7 ("net: dsa: felix:
re-enable TAS guard band mode") made things work. It must be that the
guard bands are calculated incorrectly.
I remembered that there is a magic constant in the driver, set to 33 ns
for no logical reason other than experimentation, which says "never let
the static guard bands get so large as to leave less than this amount of
remaining space in the time slot, because the queue system will refuse
to schedule packets otherwise, and they will get stuck". I had a hunch
that my previous experimentally-determined value was only good for
packets coming from the forwarding path, and that the CPU injection path
needed more.
I came to the new value of 35 ns through binary search, after seeing
that with 544 ns (the bit time required to send the Pdelay_Resp packet
at gigabit) it works. Again, this is purely experimental, there's no
logic and the manual doesn't say anything.
The new driver prints for this schedule look like this:
mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
So yes, the maximum MTU is now even smaller by 1 byte than before.
This is maybe counter-intuitive, but makes more sense with a diagram of
one time slot.
Before:
Gate open Gate close
| |
v 1250 ns total time slot duration v
<---------------------------------------------------->
<----><---------------------------------------------->
33 ns 1217 ns static guard band
useful
Gate open Gate close
| |
v 1250 ns total time slot duration v
<---------------------------------------------------->
<-----><--------------------------------------------->
35 ns 1215 ns static guard band
useful
The static guard band implemented by this switch hardware directly
determines the maximum allowable MTU for that traffic class. The larger
it is, the earlier the switch will stop scheduling frames for
transmission, because otherwise they might overrun the gate close time
(and avoiding that is the entire purpose of Michael's patch).
So, we now have guard bands smaller by 2 ns, thus, in this particular
case, we lose a byte of the maximum MTU.
Fixes: 11afdc6526 ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20241210132640.3426788-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than maintaining a private copy of the LPI timer, make use of
the LPI timer maintained by phylib. In any case, phylib overwrites the
value of tx_lpi_timer set by the driver in phy_ethtool_get_eee().
Note that feb->eee.tx_lpi_timer is initialised to zero, which is just
the same with phylib's copy, so there should be no functional change.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/E1tKzVS-006c67-IJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The device does not support multiple mirror actions per rule and the
driver rejects such configuration:
# tc filter add dev swp1 ingress pref 1 proto ip flower skip_sw action mirred egress mirror dev swp2 action mirred egress mirror dev swp3
Error: mlxsw_spectrum: Multiple mirror actions per rule are not supported.
We have an error talking to the kernel
Internally, the sample action is implemented by the device by mirroring
to the CPU port. Therefore, mixing sample and mirror actions in a single
rule does not work correctly and results in the last action effect.
Solve by rejecting such misconfiguration:
# tc filter add dev swp1 ingress pref 1 proto ip flower skip_sw action mirred egress mirror dev swp2 action sample rate 100 group 1
Error: mlxsw_spectrum: Sample action after mirror action is not supported.
We have an error talking to the kernel
# tc filter add dev swp1 ingress pref 1 proto ip flower skip_sw action sample rate 100 group 1 action mirred egress mirror dev swp2
Error: mlxsw_spectrum: Mirror action after sample action is not supported.
We have an error talking to the kernel
Reported-by: Vladyslav Mykhaliuk <vmykhaliuk@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/d6c979914e8706dbe1dedbaf29ffffb0b8d71166.1733822570.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When `skb_splice_from_iter` was introduced, it inadvertently added
checksumming for AF_UNIX sockets. This resulted in significant
slowdowns, for example when using sendfile over unix sockets.
Using the test code in [1] in my test setup (2G single core qemu),
the client receives a 1000M file in:
- without the patch: 1482ms (+/- 36ms)
- with the patch: 652.5ms (+/- 22.9ms)
This commit addresses the issue by marking checksumming as unnecessary in
`unix_stream_sendmsg`
Cc: stable@vger.kernel.org
Signed-off-by: Frederik Deweerdt <deweerdt.lkml@gmail.com>
Fixes: 2e910b9532 ("net: Add a function to splice pages into an skbuff for MSG_SPLICE_PAGES")
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/Z1fMaHkRf8cfubuE@xiberoa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
