This code wants to compare the obtained value, but as it also
has a special type for register addresses to find places doing
such compares and calculations wrong, we need explicit casts
here to silence sparse.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240223114023.976fcd59e97a.I0bba4ef7dc2847ce8ab5ec229149e1a09413b8b9@changeid
* fixes
* support for newer chips in the mt7915 driver
* mt7996 improvements
* page pool performance improvement
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - http://gpgtools.org
iF0EABECAB0WIQR10Rp9kadxD0kAQu/XfRQdAqdu9QUCZdcMxAAKCRDXfRQdAqdu
9egBAJ0bsdK3QvOEMJ433TCjMIHkaDhw/QCgrnYliO8V40ftYrCv1bqXltw2ixc=
=IAKf
-----END PGP SIGNATURE-----
Merge tag 'mt76-for-kvalo-2024-02-22' of https://github.com/nbd168/wireless
mt76 patches for 6.9
* fixes
* support for newer chips in the mt7915 driver
* mt7996 improvements
* page pool performance improvement
In brcmf_cfg80211_start_ap() do not assume that NL80211_HIDDEN_SSID_NOT_IN_USE
is zero but prefer an explicit check instead. Use local variable 'closednet'
to pass in function call and use for error message.
Compile tested only. Addition for the commit f20073f50dfd1 ("wifi: brcmfmac: do
not cast hidden SSID attribute value to boolean").
Signed-off-by: Alexey Berezhok <a@bayrepo.ru>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240222122923.46691-1-a@bayrepo.ru
PCI CLK/ASPM/L1SS is power management mechanism used to reduce power
consumption of PCI chip. The registers for setting of these features
in WiFi 7 Chip are different from WiFi 6 chip, so separate them
in generation information.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240222064258.59782-4-pkshih@realtek.com
Adjust beamforming capabilities to accurately reflect the supported
EHT features by WiFi 7 chip 8922A. It includes 1) Unset EHT CQI
feedback and 16-subcarrier grouping. 2) Correct Beamformee SS value.
3) Enable partial and full bandwidth SU/MU feedback.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240222064258.59782-3-pkshih@realtek.com
Add support for random serial number in probe request and
configure channel dwell time. Advertise corresponding feature flag
NL80211_EXT_FEATURE_SCAN_RANDOM_SN and NL80211_EXT_FEATURE_SET_SCAN_DWELL.
Use the scan request duration as channel dwell time when it is
non-zero, otherwise use the default value.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240222064258.59782-2-pkshih@realtek.com
Fix boot crash on Raspberry Pi by moving the update to `event->datalen`
before data is copied into flexible-array member `data` via `memcpy()`.
Flexible-array member `data` was annotated with `__counted_by(datalen)`
in commit 62d19b358088 ("wifi: brcmfmac: fweh: Add __counted_by for
struct brcmf_fweh_queue_item and use struct_size()"). The intention of
this is to gain visibility into the size of `data` at run-time through
its _counter_ (in this case `datalen`), and with this have its accesses
bounds-checked at run-time via CONFIG_FORTIFY_SOURCE and
CONFIG_UBSAN_BOUNDS.
To effectively accomplish the above, we shall update the counter
(`datalen`), before the first access to the flexible array (`data`),
which was also done in the mentioned commit.
However, commit edec42821911 ("wifi: brcmfmac: allow per-vendor event
handling") inadvertently caused a buffer overflow, detected by
FORTIFY_SOURCE. It moved the `event->datalen = datalen;` update to after
the first `data` access, at which point `event->datalen` was not yet
updated from zero (after calling `kzalloc()`), leading to the overflow
issue.
This fix repositions the `event->datalen = datalen;` update before
accessing `data`, restoring the intended buffer overflow protection. :)
Fixes: edec42821911 ("wifi: brcmfmac: allow per-vendor event handling")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://gist.github.com/nathanchance/e22f681f3bfc467f15cdf6605021aaa6
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/Zc+3PFCUvLoVlpg8@neat
Through the routine bond_mii_monitor(), bonding driver inspects and commits
the slave state changes. During the times when slave state change and
failure in aqcuiring rtnl lock happen at the same time, the routine
bond_mii_monitor() reschedules itself to come around after 1 msec to commit
the new state.
During this, it executes the routine bond_miimon_inspect() to re-inspect
the state chane and prints the corresponding slave state on to the console.
Hence we do see a message at every 1 msec till the rtnl lock is acquired
and state chage is committed.
This patch doesn't change how bond functions. It only simply limits this
kind of log flood.
Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20240221082752.4660-1-praveen.kannoju@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The third "new features" pull request for v6.9. This is a quick
followup to send commit 04edb5dc68f4 ("wifi: ath12k: Fix uninitialized
use of ret in ath12k_mac_allocate()") to fix the ath12k clang warning
introduced in the previous pull request.
We also have support for QCA2066 in ath11k, several new features in
ath12k and few other changes in drivers. In stack it's mostly cleanup
and refactoring.
Major changes:
ath12k
* firmware-2.bin support
* support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
* QCN9274: support split-PHY devices
* WCN7850: enable Power Save Mode in station mode
* WCN7850: P2P support
ath11k:
* QCA6390 & WCN6855: support 2 concurrent station interfaces
* QCA2066 support
iwlwifi
* mvm: support wider-bandwidth OFDMA
* bump firmware API to 90 for BZ/SC devices
brcmfmac
* DMI nvram filename quirk for ACEPC W5 Pro
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmXXJpARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZu2Twf/QZ5FVecvOu/qNQyUeaclXjNuFw0+cJpz
luVzxG54wh484L1dRAmsztwHPA78rLMcExZi2Zb9PszVv4V9mD6rHoV0ws/o86Gr
QTq+8To9sr9wJfooVRO1ifgfoiafxX2TYJ9yGR3XwkCDf5ROq9JLBOQWW8p0bO/M
UyWoMvSf/WBAjOHUfCQzPCVPQhyld7JL/V7LGMZGmdy3cPkWPVXmRMyHL9f3+vdq
O5/HxZBP4Dg3zEsUiOADmD/l+8wuf/Tebqt7uRJ4/sAHsmlEPzoZPsuNxy6FljYX
5fuZVpzmjGzdGV+YHidpbZl/9Shq/Bc7Cf7eTQZ70P9cL1kbZ7usIA==
=mcyY
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The third "new features" pull request for v6.9. This is a quick
followup to send commit 04edb5dc68f4 ("wifi: ath12k: Fix uninitialized
use of ret in ath12k_mac_allocate()") to fix the ath12k clang warning
introduced in the previous pull request.
We also have support for QCA2066 in ath11k, several new features in
ath12k and few other changes in drivers. In stack it's mostly cleanup
and refactoring.
Major changes:
ath12k
* firmware-2.bin support
* support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
* QCN9274: support split-PHY devices
* WCN7850: enable Power Save Mode in station mode
* WCN7850: P2P support
ath11k:
* QCA6390 & WCN6855: support 2 concurrent station interfaces
* QCA2066 support
iwlwifi
* mvm: support wider-bandwidth OFDMA
* bump firmware API to 90 for BZ/SC devices
brcmfmac
* DMI nvram filename quirk for ACEPC W5 Pro
* tag 'wireless-next-2024-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (75 commits)
wifi: wilc1000: revert reset line logic flip
wifi: brcmfmac: Add DMI nvram filename quirk for ACEPC W5 Pro
wifi: rtlwifi: set initial values for unexpected cases of USB endpoint priority
wifi: rtl8xxxu: check vif before using in rtl8xxxu_tx()
wifi: rtlwifi: rtl8192cu: Fix TX aggregation
wifi: wilc1000: remove AKM suite be32 conversion for external auth request
wifi: nl80211: refactor parsing CSA offsets
wifi: nl80211: force WLAN_AKM_SUITE_SAE in big endian in NL80211_CMD_EXTERNAL_AUTH
wifi: iwlwifi: load b0 version of ucode for HR1/HR2
wifi: iwlwifi: handle per-phy statistics from fw
wifi: iwlwifi: iwl-fh.h: fix kernel-doc issues
wifi: iwlwifi: api: fix kernel-doc reference
wifi: iwlwifi: mvm: unlock mvm if there is no primary link
wifi: iwlwifi: bump FW API to 90 for BZ/SC devices
wifi: iwlwifi: mvm: support PHY context version 6
wifi: iwlwifi: mvm: partially support PHY context version 6
wifi: iwlwifi: mvm: support wider-bandwidth OFDMA
wifi: cfg80211: use ML element parsing helpers
wifi: mac80211: align ieee80211_mle_get_bss_param_ch_cnt()
wifi: cfg80211: refactor RNR parsing
...
====================
Link: https://lore.kernel.org/r/20240222105205.CEC54C433F1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The newly created vnic (BNXT_VNIC_NTUPLE) is ready to be used to create
ntuple filters when supported by firmware. All RX rings can be used
regardless of the RSS indirection setting on the default VNIC.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allocate and setup the additional VNIC for ntuple filters if this
new method is supported by the firmware. Even though this VNIC is
only used for ntuple filters with direct ring destinations, we still
setup the RSS hash to be identical to the default VNIC so that each
RX packet will have the correct hash in the RX completion. This
VNIC is always at VNIC index BNXT_VNIC_NTUPLE.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On newer chips that support the ring table index method for
ntuple filters, the current scheme of using the same VNIC for
both RSS and ntuple filters will not work in all cases. An
ntuple filter can only be directed to a destination ring if
that destination ring is also in the RSS indirection table.
To support ntuple filters with any arbitratry RSS indirection
table that may only include a subset of the rings, we need to
use a separate VNIC for ntuple filters.
This patch provisions the additional VNIC. The next patch will
allocate additional VNIC from firmware and set it up.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace hard coded 0 index with more meaningful BNXT_VNIC_DEFAULT.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor bnxt_set_features() function to have a common
function to re-init. We'll need this to reinitialize when
ntuple configuration changes.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor the code by adding a new function to calculate the number of
required VNICs. This is used in multiple places when reserving or
checking resources.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bnxt_check_rings() is called to check if we have enough resource
assets to satisfy the new number of ethtool channels. If the asset
test fails, the ethtool operation will fail gracefully. Otherwise
we will proceed and commit to use the new number of channels. If it
fails to allocate any resources, the chip will fail to come up.
For completeness, check all possible resources before committing to
the new settings. Add the missing ring group and RSS context asset
tests in bnxt_check_rings().
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add RSS context fields to struct bnxt_hw_rings and struct bnxt_hw_resc.
With these, we can now specific the exact number of RSS contexts to
reserve and store the reserved value. The original code relies on
other resources to infer the number of RSS contexts to reserve and the
reserved value is not stored. This improved infrastructure will make
the RSS context accounting more complete and is needed by later
patches.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current code assumes that every RX ring group and every TX ring
requires a completion ring on P5_PLUS chips. Now that we have the
bnxt_hw_rings structure, add the cp_p5 field so that it can
be explicitly specified. This makes the logic more clear.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current functions to reserve hardware rings pass in 6 different ring
or resource types as parameters. Add a structure bnxt_hw_rings to
consolidate all these parameters and pass the structure pointer instead
to these functions. Add 2 related helper functions also. This makes
the code cleaner and makes it easier to add new resources to be
reserved.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We have support for QCA2066 now and also several new features in ath12k.
Major changes:
ath12k
* firmware-2.bin support
* support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
* QCN9274: support split-PHY devices
* WCN7850: enable Power Save Mode in station mode
* WCN7850: P2P support
ath11k:
* QCA6390 & WCN6855: support 2 concurrent station interfaces
* QCA2066 support
-----BEGIN PGP SIGNATURE-----
iQFLBAABCgA1FiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmXXA/YXHHF1aWNfa3Zh
bG9AcXVpY2luYy5jb20ACgkQbhckVSbrbZsfJQgAnqXLUIyHS873E4+OfEUIMZIu
/oFb9RzgU3Uv/8HWqwrXEtgbjthnxHWWVCEIR1roAEHX1vLxm5Wr0w4SsIRskwuK
8URUKIyHP4oep8TvA9uDrlQZ9PViDwW7F+Xc0nRh5c/AOi7bjMDCbJr7Sazjhsc5
JNYANHU1WSzc06hAk+3OrPON2e7EEpCkLDb7P1zVMF7uAxDovDpzGT+SXBTZu8Dw
UtiPbwTcGeUkBuMI4Mse6Jl/wAA2nWZXJXqPB1iilVwdz+VjksAZWODWS+m3UEW1
I+S8iYO0TWOSwGcu5rMyaeUMoGVSdu0Sw0h/2Ps7WGUoeZ8mT3Xwm6QrJBdpjg==
=UhMv
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20240222' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
ath.git patches for v6.9
We have support for QCA2066 now and also several new features in ath12k.
Major changes:
ath12k
* firmware-2.bin support
* support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
* QCN9274: support split-PHY devices
* WCN7850: enable Power Save Mode in station mode
* WCN7850: P2P support
ath11k:
* QCA6390 & WCN6855: support 2 concurrent station interfaces
* QCA2066 support
The variable tidno is being assigned a value that is not being read
and is being re-assigned a new value a few statements later.
The assignment is redundant and can be removed.
Cleans up clang scan warning:
drivers/net/wireless/mediatek/mt76/agg-rx.c:125:5: warning: Value stored
to 'tidno' during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Because the number of channels to be configured is calculated using the %,
and it results in 0 when there's an exact division, this leads to some
channels not having their tx power configured.
Fixes: 7801da338856 ("wifi: mt76: mt7921: enable set txpower for UNII-4")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MediaTek's controller driver on COB platform (e.g. MT8188) is
capable of controlling power supplies and reset pin of a component
(e.g. a WIFI chip) in power-on and power-off process.
Due to this optional feature, mt76 need to inform controller
that mt76 need to keep power during suspend. Otherwise WIFI will be
powered off when system enters suspend process.
The "wakeup-source" property was used for the device that need
this to go into suspend mode so that mt76 suspend handler doesn't
fail and the system is able to enter into a suspend state.
An example:
wifi: mt7921@0 {
wifi0{
reg = <0x0000 0 0 0 0>;
wakeup-source;
};
};
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <MingYen.Hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In multi-channel scenarios, the granted channel must be aborted before
suspending. Otherwise, the firmware will be put into a wrong state,
resulting in an association failure after resuming.
With this patch, the granted channel will be aborted before suspending
if necessary.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Before entering suspend, we need to ensure that all MCU command are
completed. In some cases, such as with regd_notifier, there is a
chance that CLC commands, will be executed before suspend.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This patch updates the EU country list to ensure the MTCL table
works correctly.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In some case, the MTCL table will exist, but MTDS table will not.
So the SAR will init fail. This patch make MTCL and MTDS can exist
with no dependence.
Fixes: f965333e491e ("mt76: mt7921: introduce ACPI SAR support")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
clc->len is defined as 32 bits in length, so it must also be
operated on with 32 bits, not 16 bits.
Fixes: fa6ad88e023d ("wifi: mt76: mt7921: fix country count limitation for CLC")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312112104.Zkc3QUHr-lkp@intel.com/
Signed-off-by: Felix Fietkau <nbd@nbd.name>
From commit a304e1b82808 ("[PATCH] Debug shared irqs"), there is a test
to make sure the shared irq handler should be able to handle the unexpected
event after deregistration. For this case, let's apply MT76_REMOVED flag to
indicate the device was removed and do not run into the resource access
anymore.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
From commit a304e1b82808 ("[PATCH] Debug shared irqs"), there is a test
to make sure the shared irq handler should be able to handle the unexpected
event after deregistration. For this case, let's apply MT76_REMOVED flag to
indicate the device was removed and do not run into the resource access
anymore.
BUG: KASAN: use-after-free in mt7921_irq_handler+0xd8/0x100 [mt7921e]
Read of size 8 at addr ffff88824a7d3b78 by task rmmod/11115
CPU: 28 PID: 11115 Comm: rmmod Tainted: G W L 5.17.0 #10
Hardware name: Micro-Star International Co., Ltd. MS-7D73/MPG B650I
EDGE WIFI (MS-7D73), BIOS 1.81 01/05/2024
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x1f/0x190
? mt7921_irq_handler+0xd8/0x100 [mt7921e]
? mt7921_irq_handler+0xd8/0x100 [mt7921e]
kasan_report.cold+0x7f/0x11b
? mt7921_irq_handler+0xd8/0x100 [mt7921e]
mt7921_irq_handler+0xd8/0x100 [mt7921e]
free_irq+0x627/0xaa0
devm_free_irq+0x94/0xd0
? devm_request_any_context_irq+0x160/0x160
? kobject_put+0x18d/0x4a0
mt7921_pci_remove+0x153/0x190 [mt7921e]
pci_device_remove+0xa2/0x1d0
__device_release_driver+0x346/0x6e0
driver_detach+0x1ef/0x2c0
bus_remove_driver+0xe7/0x2d0
? __check_object_size+0x57/0x310
pci_unregister_driver+0x26/0x250
__do_sys_delete_module+0x307/0x510
? free_module+0x6a0/0x6a0
? fpregs_assert_state_consistent+0x4b/0xb0
? rcu_read_lock_sched_held+0x10/0x70
? syscall_enter_from_user_mode+0x20/0x70
? trace_hardirqs_on+0x1c/0x130
do_syscall_64+0x5c/0x80
? trace_hardirqs_on_prepare+0x72/0x160
? do_syscall_64+0x68/0x80
? trace_hardirqs_on_prepare+0x72/0x160
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/CABXGCsOdvVwdLmSsC8TZ1jF0UOg_F_W3wqLECWX620PUkvNk=A@mail.gmail.com/
Fixes: 9270270d6219 ("wifi: mt76: mt7921: fix PCI DMA hang after reboot")
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The mtcl table provided regulatory information for 5.9/6Ghz channels and
configured by platform venders. So, sometimes vendors may write illegal
values, and therefore it is necessary to check and add corresponding
handling for such cases.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For the member of 'struct scan_req_tlv', replace data type of
func_mask_ext from 'u8' to '__le32'.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In order to recycle skbs in the page_pool "hot" cache in
napi_pp_put_page routine, set napi pointer for MMIO devices in
mt76_create_page_pool().
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce wed.c in order to collect mt76 wed common codebase used by
mt7915 and mt7996 drivers.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add a missing EHT related field to fix the following ethtool warning:
[98179.287352] mt7921e 0003:01:00.0: ei: 74 SSTATS_LEN: 73
Fixes: c74df1c067f2 ("wifi: mt76: mt792x: introduce mt792x-lib module")
Signed-off-by: Gen Xu <genxu6@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sync the value of HIF_TXD_V2_1 with firmware to let it correctly fill
TXD values for HW path.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The MUAR (multicast unicast address) is an address mapping table that
participates in the process of searching WTBL entries. For mt799x
chipsets, the default muar index of BMC WTBL is 0xe.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
A race condition was observed when accessing mapped registers, so add
locking to protect against concurrent access.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
DMA queue settings of TXS will be initialized by the firmware.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The efuse data starts from the 48th bytes instead of 64th bytes in the
returned event skb.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Since the FW does not support to handle the integrity and validation of
IGTK in GCMP mode, return -EOPNOTSUPP to let it be handled by upper layer.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set correct beamformer capabilities for station vif in HE PHY
capability IE.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
If TLV includes beacon content, its length might not be 4-byte aligned.
Make sure the length is aligned before sending beacon commands to FW.
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The EHT MCS map subfield of 20 MHz-Only is not present in the EHT
capability of AP, so STA does not need to parse the subfield.
Moreover, AP should parse the subfield only if STA is 20 MHz-Only, which
can be confirmed by checking supported channel width in HE capability.
Fixes: 92aa2da9fa49 ("wifi: mt76: mt7996: enable EHT support in firmware")
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
