Because DT check when compiling become very strict in these days,
we need to add reg = <x> if it has multi port/endpoint, otherwise
it will get error or warning. But it was not so strict and/or
mandatry before.
Current code is counting "endpoint" to get DAI ID, but it should count
"port" instead, otherwise strange ID will be used for DAI if it was multi
connected case (A). There is no issue if it was not multi connected (B).
One note is that this code will be used if neither port/endpoint doesn't
have reg = <x> property on DT.
case (A)
/* This should be handled as DAI-0 */
port@0 {
endpoint@0 { } /* It will be DAI-0 by endpoint count */
endpoint@1 { } /* It will be DAI-1 by endpoint count */
};
/* This should be handled as DAI-1 */
port@1 {
endpoint { } /* It will be DAI-2 by endpoint count */
};
case (B)
/* both endpoint cound and port count are same */
port@0 {
endpoint { ... }
};
port@1 {
endpoint { ... }
};
It will be issue if Audio-Graph-Card is used with Multi Connection.
No issue will be happen with Audio-Graph-Card2 / Simple-Card.
This patch uses for_each_of_graph_port() instead of
for_each_endpoint_of_node(), and thus, we can use "break" to quit
from loop. Because for_each_of_graph_port() uses __free(device_node)
inside.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o71tfrdz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because DT check when compiling become very strict in these days,
we need to add reg = <x> if it has multi port/endpoint, otherwise
it will get error or warning. But it was not so strict and/or
mandatry before.
Current code uses reg number as DAI ID, but it will use "endpoint"
reg first and use "port" reg 2nd. But it should use port number as 1st (A)
if it was used for multi connected case. There is no priority for
port/endpoint if it was not multi connected (B).
case (A)
port {
/*
* "port" and "endpoint" are using different reg number.
* It should use <x> as DAI ID, not <y> not <z>
*/
reg = <x>;
endpoint@y { reg = <y>; ... };
endpoint@z { reg = <z>; ... };
};
case (B)
port {
/*
* Both port/endpoint are using same reg numer <x>.
*/
reg = <x>;
endpoint { reg = <x>; ... };
};
It will be issue if Audio-Graph-Card is used with Multi Connection.
No issue will be happen with Audio-Graph-Card2 / Simple-Card.
This patch swtich port/endpoint priority.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plm9fre3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card-utils handles many type of device_node, thus need to
use of_node_put() in many place. Let's use __free(device_node)
and avoid it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87r06pfre8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Platforms like i.MX93/91 only have one audio PLL. Some sample rates are
not supported. If the PLL source is used for 8kHz series rates, then
11kHz series rates can't be supported. Use fsl_asoc_constrain_rates()
to constrain rates according to PLL sources.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20241126115440.3929061-5-chancel.liu@nxp.com
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Platforms like i.MX93/91 only have one audio PLL. Some sample rates are
not supported. If the PLL source is used for 8kHz series rates, then
11kHz series rates can't be supported. Use fsl_asoc_constrain_rates()
to constrain rates according to PLL sources. This constraint is merely
applicable to playback cases on SPDIF only platforms.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20241126115440.3929061-4-chancel.liu@nxp.com
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
fsl_asoc_constrain_rates() is a common function to constrain rates.
Let's switch to this function.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20241126115440.3929061-3-chancel.liu@nxp.com
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Platforms like i.MX93/91 only have one audio PLL. Some sample rates are
not supported. Add common function to constrain rates according to
different clock sources.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20241126115440.3929061-2-chancel.liu@nxp.com
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
UAC 2 & 3 DAC's set bit 31 of the format to signal support for a
RAW_DATA type, typically used for DSD playback.
This is correctly tested by (format & UAC*_FORMAT_TYPE_I_RAW_DATA),
fp->dsd_raw = true; and call snd_usb_interface_dsd_format_quirks(),
however a confusing and unnecessary message gets printed because
the bit is not properly tested in the last "unsupported" if test:
if (format & ~0x3F) { ... }
For example the output:
usb 7-1: new high-speed USB device number 5 using xhci_hcd
usb 7-1: New USB device found, idVendor=262a, idProduct=9302, bcdDevice=0.01
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 7-1: Product: TC44C
usb 7-1: Manufacturer: TC44C
usb 7-1: SerialNumber: 5000000001
hid-generic 0003:262A:9302.001E: No inputs registered, leaving
hid-generic 0003:262A:9302.001E: hidraw6: USB HID v1.00 Device [DDHIFI TC44C] on usb-0000:08:00.3-1/input0
usb 7-1: 2:4 : unsupported format bits 0x100000000
This last "unsupported format" is actually wrong: we know the
format is a RAW_DATA which we assume is DSD, so there is no need
to print the confusing message.
This we unset bit 31 of the format after recognizing it, to avoid
the message.
Suggested-by: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Link: https://patch.msgid.link/20241209090529.16134-2-adrian.ratiu@collabora.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduces the alc2xx-fixup-headset-mic model to simplify enabling
headset microphones on ALC2XX codecs.
Many recent configurations, as well as older systems that lacked this
fix for a long time, leave headset microphones inactive by default.
This addition provides a flexible workaround using the existing
ALC2XX_FIXUP_HEADSET_MIC quirk.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20241207201836.6879-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CA0132 used the PCI SSID lookup helper that doesn't support the model
string matching or quirk aliasing.
Replace it with the standard HD-audio quirk helpers for supporting
those, and add the definition of the model strings for supported
quirks, too. There should be no visible change to the outside for the
working system, but the driver will parse the model option and apply
the quirk based on it from now on.
Link: https://patch.msgid.link/20241207133754.3658-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of small fixes that have been gathered in the week.
- Fix the missing XRUN handling in USB-audio low latency mode
- Fix regression by the previous USB-audio hadening change
- Clean up old SH sound driver to use the standard helpers
- A few further fixes for MIDI 2.0 UMP handling
- Various HD-audio and USB-audio quirks
- Fix jack handling at PM on ASoC Intel AVS
- Misc small fixes for ASoC SOF and Mediatek
-----BEGIN PGP SIGNATURE-----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=WExA
-----END PGP SIGNATURE-----
Merge tag 'sound-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes that have been gathered in the week.
- Fix the missing XRUN handling in USB-audio low latency mode
- Fix regression by the previous USB-audio hadening change
- Clean up old SH sound driver to use the standard helpers
- A few further fixes for MIDI 2.0 UMP handling
- Various HD-audio and USB-audio quirks
- Fix jack handling at PM on ASoC Intel AVS
- Misc small fixes for ASoC SOF and Mediatek"
* tag 'sound-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix spelling mistake "Firelfy" -> "Firefly"
ASoC: mediatek: mt8188-mt6359: Remove hardcoded dmic codec
ALSA: hda/realtek: fix micmute LEDs don't work on HP Laptops
ALSA: usb-audio: Add extra PID for RME Digiface USB
ALSA: usb-audio: Fix a DMA to stack memory bug
ASoC: SOF: ipc3-topology: fix resource leaks in sof_ipc3_widget_setup_comp_dai()
ALSA: hda/realtek: Add support for Samsung Galaxy Book3 360 (NP730QFG)
ASoC: Intel: avs: da7219: Remove suspend_pre() and resume_post()
ALSA: hda/tas2781: Fix error code tas2781_read_acpi()
ALSA: hda/realtek: Enable mute and micmute LED on HP ProBook 430 G8
ALSA: usb-audio: add mixer mapping for Corsair HS80
ALSA: ump: Shut up truncated string warning
ALSA: sh: Use standard helper for buffer accesses
ALSA: usb-audio: Notify xrun for low-latency mode
ALSA: hda/conexant: fix Z60MR100 startup pop issue
ALSA: ump: Update legacy substream names upon FB info update
ALSA: ump: Indicate the inactive group in legacy substream names
ALSA: ump: Don't open legacy substream for an inactive group
ALSA: seq: ump: Fix seq port updates per FB info notify
Introduces necessary quirks to enable audio functionality on the
ASUS Zen AIO 27 Z272SD_A272SD:
- configures verbs to activate internal speakers and headphone jack.
- implements adjustments for headset microphone functionality.
The speaker and jack configurations were derived from a dump of
the working Windows driver, while the headset microphone
functionality was fine-tuned through experimental testing.
Link: https://lore.kernel.org/all/CAGGMHBOGDUnMewBTrZgoBKFk_A4sNF4fEXwfH9Ay8SNTzjy0-g@mail.gmail.com/T/
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20241205210306.977634-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a PCI quirk to enable microphone input on the headphone jack on
the Acer Nitro 5 AN515-58 laptop.
Signed-off-by: Hridesh MG <hridesh699@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241205171843.7787-1-hridesh699@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 5d7e328e20 ("ASoC: cs35l56: Revert support for dual-ownership
of ASP registers")
replaced cs35l56_force_sync_asp1_registers_from_cache() with a dummy
implementation so that the HDA driver would continue to build.
Remove the calls from HDA and remove the stub function.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241206105757.718750-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few small fixes for v6.13, all system specific - the biggest thing is
the fix for jack handling over suspend on some Intel laptops.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmdR3IYACgkQJNaLcl1U
h9CaAAgAhU+wN7LEym7648q33gVEy/I335+ZHf0gLEMnAF1iNzoOx0Gy3cXBPHq3
sic1P37UmkIIWi6BTr19aBxQ9Z0Vk3WhUsk+elmg3vhR1lodBZ9m8lYlLyEGbCh/
Ur/AFSoewPbYGdJAVL7FclDiMXlnallF6xFWbh9O9Fw85hTh4WF07dRyws8j9tZQ
qMkoic95lLPZTCplt8vHVC9sTXWuVp1HNiUKZDLLQ044PRlehLH21W4HJJgk/Dtl
TO5U1zZpY3gB1QsxaR3+6vMDgPHHCUxvRkb4/hydHmKIqoFGuu0Ootipm9su1b/L
jOKeEX2Gk6416fHpTWPUvJQTlv9MAA==
=lnCs
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A few small fixes for v6.13, all system specific - the biggest thing is
the fix for jack handling over suspend on some Intel laptops.
There is a spelling mistake in a literal string in the alc269_fixup_tbl
quirk table. Fix it.
Fixes: 0d08f0eec9 ("ALSA: hda/realtek: fix micmute LEDs don't work on HP Laptops")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20241205102833.476190-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove hardcoded dmic codec from the UL_SRC dai link to avoid requiring
a dmic codec to be present for the driver to probe, as not every
MT8188-based platform might need a dmic codec. The codec can be assigned
to the dai link through the dai-link property in Devicetree on the
platforms where it is needed.
No Devicetree currently relies on it so it is safe to remove without
worrying about backward compatibility.
Fixes: 9f08dcbdde ("ASoC: mediatek: mt8188-mt6359: support new board with nau88255")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20241203-mt8188-6359-unhardcode-dmic-v1-1-346e3e5cbe6d@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit cdd30ebb1b ("module: Convert symbol namespace to string
literal") changes the arguments for various module symbol macros
including some that we've aded new uses for. Merge the commit up to
avoid problems in -next.
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
This series prepares for dissimilar aggregation of CS42L43 + CS35L56
speaker playback. The CS35L56 SoundWire DAI is split into separate
DAIs for playback and capture so they can be routed and aggregated
differently.
The cs_amp driver is also updated to enable different TX (capture)
slots on each CS35L56 on a bus, so that the captures can be aggregated.
Merge series from "Csókás, Bence" <csokas.bence@prolan.hu>:
Support for Allwinner F1C100s/200s series audio was
submitted in 2018 as an RFC series, but was not merged,
despite having only minor errors. However, this is
essential for having audio on these SoCs.
This series was forward-ported/rebased to the best of
my abilities, on top of Linus' tree as of now:
commit 28eb75e178 ("Merge tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel")
Link: https://lore.kernel.org/all/cover.1543782328.git.mesihkilinc@gmail.com/
As requested by many, this series will now be split in 2, the DMA and the
ALSA/ASoC codec driver. This is the codec part of the series.
The first part (DMA) is at the link below. The first 3 patches of this
series can be applied and built without the former series, but for working
audio you need them both, plus the last 2 Device Tree patches in this series.
Link: https://lore.kernel.org/linux-kernel/20241122161128.2619172-1-csokas.bence@prolan.hu/
Merge series from Takashi Iwai <tiwai@suse.de>:
I stumbled upon the use of *-objs in Makefile in a few places in
ASoC. Here are trivial patches to correct those.
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
Define regmap for PHY and PLL registers, the PHY and PLL
registers are accessed by AI interface in controller.
Then driver can use regcache to recover registers
after suspend and resume.
The newly added SCMI vendor driver references functions in the
protocol driver but needs a Kconfig dependency to ensure it can link,
essentially the Kconfig dependency needs to be reversed to match the
link time dependency:
| arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_write':
| fsl_mqs.c:(.text+0x1aa): undefined reference to `scmi_imx_misc_ctrl_set'
| arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_read':
| fsl_mqs.c:(.text+0x1ee): undefined reference to `scmi_imx_misc_ctrl_get'
This however only works after changing the dependency in the SND_SOC_FSL_MQS
driver as well, which uses 'select IMX_SCMI_MISC_DRV' to turn on a
driver it depends on. This is generally a bad idea, so the best solution
is to change that into a dependency.
To allow the ASoC driver to keep building with the SCMI support, this
needs to be an optional dependency that enforces the link-time
dependency if IMX_SCMI_MISC_DRV is a loadable module but not
depend on it if that is disabled.
Fixes: 61c9f03e22 ("firmware: arm_scmi: Add initial support for i.MX MISC protocol")
Fixes: 101c902359 ("ASoC: fsl_mqs: Support accessing registers by scmi interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Message-Id: <20241115230555.2435004-1-arnd@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
We should use *-y instead of *-objs in Makefile for the module
objects. *-objs is used rather for host programs.
Fixes: 313e978df7 ("ASoC: codecs: wcd937x: add audio routing and Kconfig")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241203141823.22393-6-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
We should use *-y instead of *-objs in Makefile for the module
objects. *-objs is used rather for host programs.
Fixes: 250304a0fb ("ASoC: cs42l84: Add new codec driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241203141823.22393-5-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
We should use *-y instead of *-objs in Makefile for the module
objects. *-objs is used rather for host programs.
Fixes: 3a513da1ae ("ASoC: SDCA: add initial module")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241203141823.22393-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
We should use *-y instead of *-objs in Makefile for the module
objects. *-objs is used rather for host programs.
Fixes: 5bbfdad8cf ("ASoC: mediatek: Add MT8365 support")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241203141823.22393-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
We should use *-y instead of *-objs in Makefile for the module
objects. *-objs is used rather for host programs.
Fixes: c486def5b3 ("ASoC: cs40l50: Support I2S streaming to CS40L50")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241203141823.22393-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ZSC Control register programming sequence for ACP D0 and D3 state
transitions for ACP6.3 platform. This will allow ACP to enter low power
state when ACP enters D3 state. When ACP enters D0 State, ZSC control
should be disabled.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20241203081940.3390281-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each cpu DAI should associate with a widget. However, the topology might
not create the right number of DAI widgets for aggregated amps. And it
will cause NULL pointer deference.
Check that the DAI widget associated with the CPU DAI is valid to prevent
NULL pointer deference due to missing DAI widgets in topologies with
aggregated amps.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20241203104853.56956-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have a capability check at hda_hwdep_open(), but it's applied only
conditionally and the check is skipped when CONFIG_SND_DEBUG_VERBOSE
is set. This is rather inconsistent behavior, and we should apply the
check always no matter which config is chosen.
Link: https://patch.msgid.link/20241203135248.19840-1-tiwai@suse.de
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use snd_soc_dai_set_tdm_slot() on capture DAIs to prevent multiple
aggregated amps from trying to send data at the same time.
When the capture DAIs of multiple amps on a bus are aggregated they will
all be sharing the same bit slots for transmitted audio. This would lead
to bus errors if all channels on all amps were enabled, because multiple
amps would be trying to send data at the same time.
To prevent this, the available channels are divided between the amps on a
bus so that only one amp will be sending data for each channel position.
A CS35L56 has 4 TX channels, which must be split between all the amps on a
bus so that no two amps are using the same channel. This is done simply by
dividing by the number of amps on the bus, so that 1 amp can use all
4 channels, 2 amps can use 2 channels each, and 3 or 4 amps can only use
1 channel each.
The amps are usually aggregated across multiple SoundWire buses. In this
case there will be multiple cpu DAIs in the dailink. The channel mapping
is used to determine which amps are on each bus. The allocation of the
4 channels is done separately for each bus (only amps on the same bus can
interfere with each other).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241203104534.56719-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch splits the SoundWire capture DP into a separate DAI so that
it can be independently routed and/or aggregated. It also makes
corresponding changes to the SOF SoundWire machine driver.
The playback and capture over SoundWire are separate DPs so don't have to
route to the same place. They could also be aggregated differently - for
example the playback DP could be aggregated with a playback-only DAI on
a codec.
No production device currently uses the capture path and their topologies
do not connect it. So there is no need to change the machine driver match
table entries for these. They will simply drop the unused capture DAI.
There is one hookup used for a non-production development board that was
added by commit 05fe628428 ("ASoC: Intel: soc-acpi-intel-mtl-match: add
acpi match table for cdb35l56-eight-c") This is the only hookup using a
topology that connects the SoundWire DP for capture, so this hookup has
been changed to include an aggregated endpoint for the capture DAI.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241203104534.56719-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20241202113641.1003836-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These HP laptops use Realtek HDA codec ALC3315 combined CS35L56
Amplifiers. They need the quirk ALC285_FIXUP_HP_GPIO_LED to get
the micmute LED working.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241202144659.1553504-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It seems there is an alternate version of the hardware with a different
PID. User testing reveals this still works with the same interface as far
as the kernel is concerned, so just add the extra PID. Thanks to Heiko
Engemann for testing with this version.
Due to the way quirks-table.h is structured, that means we have to turn
the entire quirk struct into a macro to avoid duplicating it...
Cc: stable@vger.kernel.org
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20241202-rme-digiface-usb-id-v1-1-50f730d7a46e@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The usb_get_descriptor() function does DMA so we're not allowed
to use a stack buffer for that. Doing DMA to the stack is not portable
all architectures. Move the "new_device_descriptor" from being stored
on the stack and allocate it with kmalloc() instead.
Fixes: b909df18ce ("ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices")
Cc: stable@kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/60e3aa09-039d-46d2-934c-6f123026c2eb@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Allwinner suniv F1C100s has similar but primitive audio codec
comparared to sun4i. Add support for it.
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
[ csokas.bence: Remove `non_legacy_dai_naming`, add `reg_dac_fifoc` ]
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Link: https://github.com/mricon/b4/issues/50
Link: https://patch.msgid.link/20241123123900.2656837-4-csokas.bence@prolan.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
Allwinner suniv F1C100s has similar DMA engine to sun4i but it has
smaller max burst size compared to sun4i. Add a quirk field to
differantitate between them.
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
[ csokas.bence: Rebased on current master ]
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20241123123900.2656837-2-csokas.bence@prolan.hu
Link: https://github.com/mricon/b4/issues/50
Signed-off-by: Mark Brown <broonie@kernel.org>
The notification via system announce port isn't a lightweight task,
hence it'd be better to skip if there is no subscription is done for
the announce port. Implement a simple counter for checking that by
hooking the subscribe and unsubscribe callbacks.
Link: https://patch.msgid.link/20241128074801.32253-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It was supposed to be notified when a sequencer client info and a port
info has changed (via SNDRV_SEQ_EVENT_CLIENT_CHANGE and
SNDRV_SEQ_EVENT_PORT_CHANGE event, respectively), and there are
already helper functions. But those aren't really sent from the
driver so far, except for the recent support of UMP, simply due to the
lack of implementations.
This patch adds the missing notifications at updating the client and
the port info. The formerly added notification for UMP is dropped
because it's handled now in the port info side.
Reported-by: Mark Lentczner <mark@glyphic.com>
Link: https://lore.kernel.org/CAPnksqRok7xGa4bxq9WWimVV=28-7_j628OmrWLS=S0=hzaTHQ@mail.gmail.com
Link: https://patch.msgid.link/20241128074734.32165-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes the 3.5mm headphone jack on the Samsung Galaxy Book 3 360
NP730QFG laptop.
Unlike the other Galaxy Book3 series devices, this device only needs
the ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET quirk.
Verified changes on the device and compared with codec state in Windows.
[ white-space fixes by tiwai ]
Signed-off-by: Sahas Leelodharry <sahas.leelodharry@mail.mcgill.ca>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/QB1PR01MB40047D4CC1282DB7F1333124CC352@QB1PR01MB4004.CANPRD01.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
'struct i2c_device_id' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
While at it, also add some space to be consistent with cs42l51_of_match a
few lines below.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
1551 384 16 1951 79f sound/soc/codecs/cs42l51-i2c.o
After:
=====
text data bss dec hex filename
1631 304 16 1951 79f sound/soc/codecs/cs42l51-i2c.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/d5e686f47eddb14245d0fde693ff77ae749f7a08.1731689646.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit fixes a useless call issue detected by Coverity
(CID 1507978). The call to rockchip_i2s_ch_to_io is unnecessary as its
return value is never checked or used. As a result, the function
definition and call is removed.
Signed-off-by: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@gmail.com>
Link: https://patch.msgid.link/20241118045605.48440-1-dheeraj.linuxdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use regcache_sync() to recover the registers of controller,
PHY and PLL after suspend and resume.
In order to recover the registers need to avoid use the
*_SET, *_CLR and *_TOG registers.
Recovery of the registers should be done before loading
XCVR firmware otherwise some registers set by firmware
are overwritten. Besides only in eARC mode is it necessary
to load XCVR firmware.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20241127030035.649219-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define regmap for PHY and PLL registers, the PHY and PLL
registers are accessed by AI interface in controller.
So that driver can use regcache to recover registers
after suspend and resume.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20241127030035.649219-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The presence of a plugged jack is not detected after resuming the device
if the jack was plugged before the device was suspended. This problem is
caused by calling the
sound/soc/codecs/da7219-aad.c:da7219_aad_jack_det() function on resume,
which forces the jack insertion state to be unplugged.
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Link: https://patch.msgid.link/20241128205215.2435485-1-mmaslanka@google.com
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
HP ProBook 430 G8 has a mute and micmute LEDs that can be made to work
using quirk ALC236_FIXUP_HP_GPIO_LED. Enable already existing quirk.
Signed-off-by: Nazar Bilinskyi <nbilinskyi@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241130231631.8929-1-nbilinskyi@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Corsair HS80 RGB Wireless is a USB headset with a mic and a sidetone
feature. It has the same quirk as the Virtuoso series.
This labels the mixers appropriately, so applications don't
move the sidetone volume when they actually intend to move the main
headset volume.
Signed-off-by: Marie Ramlow <me@nycode.dev>
cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241130165240.17838-1-me@nycode.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of small fixes. Majority of changes are device-specific
fixes and quirks, while there are a few core fixes to address
regressions and corner cases spotted by fuzzers.
- Fix of spinlock range that wrongly covered kvfree() call in rawmidi
- Fix potential NULL dereference at PCM mmap
- Fix incorrectly advertised MIDI 2.0 UMP Function Block info
- Various ASoC AMD quirks and fixes
- ASoC SOF Intel, Mediatek, HDMI-codec fixes
- A few more quirks and TAS2781 codec fix for HD-audio
- A couple of fixes for USB-audio for malicious USB descriptors
-----BEGIN PGP SIGNATURE-----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=FLBb
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. Majority of changes are device-specific
fixes and quirks, while there are a few core fixes to address
regressions and corner cases spotted by fuzzers.
- Fix of spinlock range that wrongly covered kvfree() call in rawmidi
- Fix potential NULL dereference at PCM mmap
- Fix incorrectly advertised MIDI 2.0 UMP Function Block info
- Various ASoC AMD quirks and fixes
- ASoC SOF Intel, Mediatek, HDMI-codec fixes
- A few more quirks and TAS2781 codec fix for HD-audio
- A couple of fixes for USB-audio for malicious USB descriptors"
* tag 'sound-fix-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda: improve bass speaker support for ASUS Zenbook UM5606WA
ALSA: hda/realtek: Apply quirk for Medion E15433
ASoC: amd: yc: Add a quirk for microfone on Lenovo ThinkPad P14s Gen 5 21MES00B00
ASoC: SOF: ipc3-topology: Convert the topology pin index to ALH dai index
ASoC: mediatek: Check num_codecs is not zero to avoid panic during probe
ASoC: amd: yc: Fix for enabling DMIC on acp6x via _DSD entry
ALSA: ump: Fix evaluation of MIDI 1.0 FB info
ALSA: core: Fix possible NULL dereference caused by kunit_kzalloc()
ALSA: hda: Show the codec quirk info at probing
ALSA: asihpi: Remove unused variable
ALSA: hda/realtek: Set PCBeep to default value for ALC274
ALSA: hda/tas2781: Add speaker id check for ASUS projects
ALSA: hda/realtek: Update ALC225 depop procedure
ALSA: hda/realtek: Enable speaker pins for Medion E15443 platform
ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook X G1i
ALSA: usb-audio: Fix out of bounds reads when finding clock sources
ALSA: rawmidi: Fix kvfree() call in spinlock
ALSA: hda/realtek: Fix Internal Speaker and Mic boost of Infinix Y4 Max
ASoC: amd: yc: Add quirk for microphone on Lenovo Thinkpad T14s Gen 6 21M1CTO1WW
ASoC: doc: dapm: Add location information for dapm-graph tool
...
The SH DAC audio driver uses the kmalloc'ed buffer as the main PCM
buffer, and the data is transferred via hrtimer callbacks manually
from there to the hardware. Meanwhile, some of its code are written
as if the buffer is on iomem and use the special helpers for the iomem
(e.g. copy_from_iter_toio() or memset_io()). Those are rather useless
and the standard helpers should be used.
Similarly, the PCM mmap callback is set to a special one with
snd_pcm_lib_mmap_iomem, but this is also nonsense, because SH
architecture doesn't support this function, hence it leads just to
NULL -- the fallback to the standard helper.
This patch replaces those special setups with the standard ones.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411281337.I4M07b7i-lkp@intel.com/
Link: https://patch.msgid.link/20241128104939.13755-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The low-latency mode of USB-audio driver uses a similar approach like
the implicit feedback mode but it has an explicit queuing at the
trigger start time. The difference is, however, that no packet will
be handled any longer after all queued packets are handled but no
enough data is fed. In the case of implicit feedback mode, the
capture-side packet handling triggers the re-queuing, and this checks
the XRUN. OTOH, in the low-latency mode, it just stops without XRUN
notification unless any new action is taken from user-space via ack
callback. For example, when you stop the stream in aplay, no XRUN is
reported.
This patch adds the XRUN check at the packet complete callback in the
case all pending URBs are exhausted. Strictly speaking, this state
doesn't match really with XRUN; in theory the application may queue
immediately after this happens. But such behavior is only for
1-period configuration, which the USB-audio driver doesn't support.
So we may conclude that this situation leads certainly to XRUN.
A caveat is that the XRUN should be triggered only for the PCM RUNNING
state, and not during DRAINING. This additional state check is put in
notify_xrun(), too.
Fixes: d5f871f89e ("ALSA: usb-audio: Improved lowlatency playback support")
Reported-by: Leonard Crestez <cdleonard@gmail.com>
Link: https://lore.kernel.org/25d5b0d8-4efd-4630-9d33-7a9e3fa9dc2b@gmail.com
Link: https://patch.msgid.link/20241128080446.1181-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When Z60MR100 startup, speaker will output a pop. To fix this issue,
we mute codec by init verbs in bios when system startup, and set GPIO
to low to unmute codec in codec driver when it loaded .
[ white space fixes and compile warning fix by tiwai ]
Signed-off-by: bo liu <bo.liu@senarytech.com>
Link: https://patch.msgid.link/20241129014441.437205-1-bo.liu@senarytech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the legacy rawmidi has no proper way to know the inactive group,
indicate it in the rawmidi substream names with "[Inactive]" suffix
when the corresponding UMP group is inactive.
Link: https://patch.msgid.link/20241129094546.32119-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a UMP Group is inactive, we shouldn't allow users to access it
via the legacy MIDI access. Add the group active flag check and
return -ENODEV if it's inactive.
Link: https://patch.msgid.link/20241129094546.32119-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
update_port_infos() is called when a UMP FB Info update notification
is received, and this function is supposed to update the attributes of
the corresponding sequencer port. However, the function had a few
issues and it brought to the incorrect states. Namely:
- It tried to get a wrong sequencer info for the update without
correcting the port number with the group-offset 1
- The loop exited immediately when a sequencer port isn't present;
this ended up with the truncation if a sequencer port in the middle
goes away
This patch addresses those bugs.
Fixes: 4a16a3af05 ("ALSA: seq: ump: Handle FB info update")
Link: https://patch.msgid.link/20241128170423.23351-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A pile of driver specific quirks and fixes that came in since the merge
window. One of the AMD fixes is a bit broken for some systems, I'm
expecting an incremental change to fix that but it seems better overall
to merge the rest of the fixes.
There's also one small documentation update that seemed sensible to
apply now, pointing to the dapm-graph tool.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmdIbcgACgkQJNaLcl1U
h9DlTgf7BxJR5q38fnk2XxOr8CF8qngDgL+KTPmUqVFNTv8R8wypMaQ0IV4dxkHn
YB4ABuGkXnSiJml4cBXaPq+l+xU8wp3QM8GY+EwmXJApDGJ9dzDJI2S0m/+VrYm3
ZIHNKrwXu/f0KB5HMSPmg0gsuCi88Y89GcFqeI0+F2fnFjv87VmyFktbE5Qy7pNa
OQVoGuGHel7CYEW0arOXs/lbhSrYRiSzEr2fR9l1Yx6HbIyt/c1nDzWbJar6emYw
gDeyUETJtOEg1FqkFmjCFLIhZMVReoyA/VJ+OzaBn8CjHr2HLecl5zbZVoG3id4l
f9JhcMD+5Q19u9ijDYUdn9JgR9AhTw==
=/CdR
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.13-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A pile of driver specific quirks and fixes that came in since the merge
window. One of the AMD fixes is a bit broken for some systems, I'm
expecting an incremental change to fix that but it seems better overall
to merge the rest of the fixes.
There's also one small documentation update that seemed sensible to
apply now, pointing to the dapm-graph tool.
- structure optimization of few bus structures and header updates
- support for 2.0 disco spec
- amd driver updates for acp revision, refactoring code and support for
acp6.3
- soft reset support for cadence driver
-----BEGIN PGP SIGNATURE-----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=3Ob7
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- structure optimization of few bus structures and header updates
- support for 2.0 disco spec
- amd driver updates for acp revision, refactoring code and support for
acp6.3
- soft reset support for cadence driver
* tag 'soundwire-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (24 commits)
soundwire: Minor formatting fixups in sdw.h header
soundwire: Update the includes on the sdw.h header
soundwire: cadence: clear MCP BLOCK_WAKEUP in init
soundwire: cadence: add soft-reset on startup
soundwire: intel_auxdevice: add kernel parameter for mclk divider
soundwire: mipi-disco: add support for DP0/DPn 'lane-list' property
soundwire: mipi-disco: add new properties from 2.0 spec
soundwire: mipi-disco: add comment on DP0-supported property
soundwire: mipi-disco: add support for peripheral channelprepare timeout
soundwire: mipi_disco: add support for clock-scales property
soundwire: mipi-disco: add error handling for property array read
soundwire: mipi-disco: remove DPn audio-modes
soundwire: optimize sdw_dpn_prop
soundwire: optimize sdw_dp0_prop
soundwire: optimize sdw_slave_prop
soundwire: optimize sdw_bus structure
soundwire: optimize sdw_master_prop
soundwire: optimize sdw_stream_runtime memory layout
soundwire: mipi_disco: add MIPI-specific property_read_bool() helpers
soundwire: Correct some typos in comments
...
Intel SoundWire machine driver always uses Pin number 2 and above.
Currently, the pin number is used as the FW DAI index directly. As a
result, FW DAI 0 and 1 are never used. That worked fine because we use
up to 2 DAIs in a SDW link. Convert the topology pin index to ALH dai
index, the mapping is using 2-off indexing, iow, pin #2 is ALH dai #0.
The issue exists since beginning. And the Fixes tag is the first commit
that this commit can be applied.
Fixes: b66bfc3a98 ("ASoC: SOF: sof-audio: Fix broken early bclk feature for SSP")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241127092955.20026-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following commit 13f58267cd ("ASoC: soc.h: don't create dummy
Component via COMP_DUMMY()"), COMP_DUMMY() became an array with zero
length, and only gets populated with the dummy struct after the card is
registered. Since the sound card driver's probe happens before the card
registration, accessing any of the members of a dummy component during
probe will result in undefined behavior.
This can be observed in the mt8188 and mt8195 machine sound drivers. By
omitting a dai link subnode in the sound card's node in the Devicetree,
the default uninitialized dummy codec is used, and when its dai_name
pointer gets passed to strcmp() it results in a null pointer dereference
and a kernel panic.
In addition to that, set_card_codec_info() in the generic helpers file,
mtk-soundcard-driver.c, will populate a dai link with a dummy codec when
a dai link node is present in DT but with no codec property.
The result is that at probe time, a dummy codec can either be
uninitialized with num_codecs = 0, or be an initialized dummy codec,
with num_codecs = 1 and dai_name = "snd-soc-dummy-dai". In order to
accommodate for both situations, check that num_codecs is not zero
before accessing the codecs' fields but still check for the codec's dai
name against "snd-soc-dummy-dai" as needed.
While at it, also drop the check that dai_name is not null in the mt8192
driver, introduced in commit 4d4e1b6319 ("ASoC: mediatek: mt8192:
Check existence of dai_name before dereferencing"), as it is actually
redundant given the preceding num_codecs != 0 check.
Fixes: 13f58267cd ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Acked-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://patch.msgid.link/20241126-asoc-mtk-dummy-panic-v1-1-42d53e168d2e@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add condition check to register ACP PDM sound card by reading
_WOV acpi entry.
Fixes: 5426f506b5 ("ASoC: amd: Add support for enabling DMIC on acp6x via _DSD")
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20241127112227.227106-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The m1.0 field of UMP Function Block info specifies whether the given
FB is a MIDI 1.0 port or not. When implementing the UMP support on
Linux, I somehow interpreted as if it were bit flags, but the field is
actually an enumeration from 0 to 2, where 2 means MIDI 1.0 *and* low
speed.
This patch corrects the interpretation and sets the right bit flags
depending on the m1.0 field of FB Info. This effectively fixes the
missing detection of MIDI 1.0 FB when m1.0 is 2.
Fixes: 37e0e14128 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241127070059.8099-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
kunit_kzalloc() may return a NULL pointer, dereferencing it without
NULL check may lead to NULL dereference.
Add NULL checks for all the kunit_kzalloc() in sound_kunit.c
Fixes: 3e39acf56e ("ALSA: core: Add sound core KUnit test")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Link: https://patch.msgid.link/20241126192448.12645-1-zichenxie0106@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=2Otz
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
Lots of HD-audio devices need the device-specific quirk, and it's
often helpful to know which quirk is applied. But currently the
driver shows it only as a debug output, hence we'd have to enable the
debug option at each time we want to see it (and the output becomes
too messy due to other debug messages).
This patch changes the messages to the info level, so that they appear
at probing normally.
Link: https://patch.msgid.link/20241126141010.12567-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
BIOS Enable PC beep path cause pop noise via speaker during boot time.
Set to default value from driver will solve the issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/2721bb57e20a44c3826c473e933f9105@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add speaker id check by gpio in ACPI for ASUS projects.
In other vendors, speaker id was checked by BIOS, and was applied in
last bit of subsys id, so we can load corresponding firmware binary file
for its speaker by subsys id.
But in ASUS project, the firmware binary name will be appended an extra
number to tell the speakers from different vendors. And this single digit
come from gpio level of speaker id in BIOS.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20241123073718.475-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Speaker has no sound for Medion E15443.
Added another speaker pins for Medion E15443 platform.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/eac4f3aca2ab45e59ccd207a90ee60e9@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP EliteBook X G1i needs ALC285_FIXUP_HP_GPIO_LED quirk to
make mic-mute/audio-mute working.
Signed-off-by: Dirk Su <dirk.su@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241126060531.22759-1-dirk.su@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current USB-audio driver code doesn't check bLength of each
descriptor at traversing for clock descriptors. That is, when a
device provides a bogus descriptor with a shorter bLength, the driver
might hit out-of-bounds reads.
For addressing it, this patch adds sanity checks to the validator
functions for the clock descriptor traversal. When the descriptor
length is shorter than expected, it's skipped in the loop.
For the clock source and clock multiplier descriptors, we can just
check bLength against the sizeof() of each descriptor type.
OTOH, the clock selector descriptor of UAC2 and UAC3 has an array
of bNrInPins elements and two more fields at its tail, hence those
have to be checked in addition to the sizeof() check.
Reported-by: Benoît Sevens <bsevens@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/20241121140613.3651-1-bsevens@google.com
Link: https://patch.msgid.link/20241125144629.20757-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Internal Speaker of Infinix Y4 Max remains muted due to incorrect
Pin configuration, and the Internal Mic records high noise. This patch
corrects the Pin configuration for the Internal Speaker and limits
the Internal Mic boost.
HW Probe for device: https://linux-hardware.org/?probe=6d4386c347
Test: Internal Speaker works fine, Mic has low noise.
Signed-off-by: Dinesh Kumar <desikumar81@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241125092842.13208-1-desikumar81@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
tps65010, have undergone minor code improvements to enhance consistency and
fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0 capability
for consistent register map configuration across syscons of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced regulator
put and ensure proper synchronization during driver removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant improvements,
including the use of IRQ domains for various devices, fixing IRQ domain names
duplication, and code refactoring for better consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break statement in
the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver, along
with ensuring a clear relationship between IDs and model names, and allowing
multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved power
management.
- The adp5585 driver has reduced its dependencies by dropping the obsolete
dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397 driver,
expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name from
IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing regmap_del_irq_chip()
in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML format
for better readability and maintainability.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmc/KQQACgkQUa+KL4f8
d2E0Gg//blIYrtUgGy5xEwR8WIobYtAxBo+AMX1tSgh4Hs4u/SFhy4cE7no+M3J2
Id5gQJscuz3k4sH0raoUMp2NRFyI8lD8Y9xRBTDE+KV/FbdL1KHfmTun2NY1zG7U
LIop39HsJkJ0Z06lnyBf61QK6SmlzT8vXbJmK4mYf8wgBX7iFDZ0FMZHP2uW5k/Z
UV8nyQalwerG+jOGXfQkVDXF8YKToqPtqsFWTJ1Yn5gs1SCd6dyusDNYqUDuW4Ng
dbu/4wt3mspliTOnBTPnXlcVsCNefhtbCWxyBpaA3luK9ciMdX7cZ8wei1xkFcwK
5bXPjXsFiiUbDX0l/6eS1h676k1JQl5iABlhGXHJm/GMcN9fdNFCQL/2rtJ4iSfW
0CoYjERfm6OyHF0Wiuk3I8x/AARWKXtDEjktGXUL0do7NBqJgB3ISme8x8b5hW4l
HO6MmsFmHxHbIlb+kCTTCtXa5R1Sdca/8qrPxMb+B89X3eOtF7sjVgS9dwkLNCGp
hqP0K2IGNaRw+EDlXCBaWrbq7x0kpup6o+nooViU0Pj9fFjEdZlCLyu22+kjl04V
Lfe3x9wMXBrHVrPynoaQp6+57QlWfpM0uuKJWoaKlCoJTh8UbFcWWkDqr6I/pDur
EtfSwOO8uVuS8m/FMAs0m/+zrWfHAvjAbAHFCKBu/vKaD5DvxeI=
=YP3r
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
tps65010, have undergone minor code improvements to enhance
consistency and fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0
capability for consistent register map configuration across syscons
of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device
compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced
regulator put and ensure proper synchronization during driver
removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant
improvements, including the use of IRQ domains for various devices,
fixing IRQ domain names duplication, and code refactoring for better
consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break
statement in the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver,
along with ensuring a clear relationship between IDs and model names,
and allowing multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved
power management.
- The adp5585 driver has reduced its dependencies by dropping the
obsolete dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397
driver, expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name
from IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing
regmap_del_irq_chip() in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated
i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML
format for better readability and maintainability.
* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
dt-bindings: mfd: sprd,sc2731: Convert to YAML
mfd: tqmx86: Add I2C IRQ support
mfd: tqmx86: Make IRQ setup errors non-fatal
mfd: tqmx86: Refactor GPIO IRQ setup
mfd: tqmx86: Improve gpio_irq module parameter description
mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
mfd: 88pm886: Add the RTC cell
dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
mfd: intel_soc_pmic_*: Consistently use filename as driver name
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
mfd: rt5033: Fix missing regmap_del_irq_chip()
mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
dt-bindings: mfd: aspeed: Support for AST2700
mfd: Switch back to struct platform_driver::remove()
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
mfd: rtc: bd7xxxx Drop IC name from IRQ
mfd: mt6397: Add initial support for MT6328
mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
...
This is a relatively calm cycle, and majority of changes are about
ASoC. There are little changes in the core side but we received
lots of new drivers for new vendors.
* ALSA Core:
- The new accel operation mode for compress-offload API;
only the core part, and the actual user will follow at next
* ASoC:
- Continued API simplification works
- Renaming of the sh directory to Renesas
- Factoring out of some of the common code for Realtek devices
- Ussal ASoC Intel SOF, AMD and SoundWire updates
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307,
Longsoon I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342,
Qualcomm SM8750, RealTek RT721, and ST Microelectronics STM32MP25
* HD- and USB-audio:
- Clean up of IRQ handling in legacy HD-audio driver
- Fix soft lockup at disconnection of non-standard USB drivers
- Scarlett2 mixer improvements
- New quirks and cleanups in HD- and USB-audio
-----BEGIN PGP SIGNATURE-----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=gOHc
-----END PGP SIGNATURE-----
Merge tag 'sound-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This is a relatively calm cycle, and majority of changes are about
ASoC. There are little changes in the core side but we received lots
of new drivers for new vendors.
ALSA Core:
- The new accel operation mode for compress-offload API; only the
core part, the actual user will follow later
ASoC:
- Continued API simplification works
- Renaming of the sh directory to Renesas
- Factoring out of some of the common code for Realtek devices
- Ussal ASoC Intel SOF, AMD and SoundWire updates
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307,
Longsoon I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342,
Qualcomm SM8750, RealTek RT721, and ST Microelectronics STM32MP25
HD- and USB-audio:
- Clean up of IRQ handling in legacy HD-audio driver
- Fix soft lockup at disconnection of non-standard USB drivers
- Scarlett2 mixer improvements
- New quirks and cleanups in HD- and USB-audio"
* tag 'sound-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (278 commits)
ALSA: hda: Poll jack events for LS7A HD-Audio
ASoC: hdmi-codec: reorder channel allocation list
ALSA: ump: Fix the wrong format specifier
ASoC: Intel: soc-acpi-intel-lnl-match: add rt712_vb + rt1320 support
ASoC: stm32: dfsdm: change rate upper limits
ASoC: sma1307: fix uninitialized variable refence
ASoC: dt-bindings: simple-mux: add idle-state property
ASoc: simple-mux: add idle-state support
ASoC: sdca: test adev before calling acpi_dev_for_each_child
ASoC: SOF: ipc4-topology: remove redundant assignment to variable ret
ASoC: amd: ps: fix the pcm device numbering for acp 6.3 platform
ASoC: amd: acp: add soundwire machine driver for legacy stack
ASoC: amd: acp: move get_acp63_cpu_pin_id() to common file
ASoC: amd: ps: add soundwire machines for acp6.3 platform
ASoC: amd: acp: add RT711, RT714 & RT1316 support for acp 6.3 platform
ASoC: amd: acp: add rt722 based soundwire machines
ALSA: compress_offload: Add missing descriptions in structs
ALSA: 6fire: Release resources at card release
ALSA: caiaq: Use snd_card_free_when_closed() at disconnection
ALSA: us122l: Drop mmap_count field
...
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in imx_audmix_probe() is not checked.
Add NULL check in imx_audmix_probe(), to handle kernel NULL
pointer dereference error.
Fixes: 05d996e113 ("ASoC: imx-audmix: Split capture device for audmix")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://patch.msgid.link/20241118084553.4195-1-hanchunchao@inspur.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples.
Fix the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys address
of the DTB as __pa() is not always valid to use. This fixes a warning
for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports and
endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever possible
-----BEGIN PGP SIGNATURE-----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=NCYS
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
A bogus device can provide a bNumConfigurations value that exceeds the
initial value used in usb_get_configuration for allocating dev->config.
This can lead to out-of-bounds accesses later, e.g. in
usb_destroy_configuration.
Signed-off-by: Benoît Sevens <bsevens@google.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Link: https://patch.msgid.link/20241120124144.3814457-1-bsevens@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix mistake in the comment.
sound/ac97/bus.c:192: warning: Function parameter or member 'drv' not described in 'snd_ac97_codec_driver_register'
sound/ac97/bus.c:192: warning: Excess function parameter 'dev' description in 'snd_ac97_codec_driver_register'
sound/ac97/bus.c:205: warning: Function parameter or member 'drv' not described in 'snd_ac97_codec_driver_unregister'
sound/ac97/bus.c:205: warning: Excess function parameter 'dev' description in 'snd_ac97_codec_driver_unregister'
sound/ac97/bus.c:351: warning: Function parameter or member 'codecs_pdata' not described in 'snd_ac97_controller_register'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411180804.FUfdymYO-lkp@intel.com/
Fixes: 74426fbff6 ("ALSA: ac97: add an ac97 bus")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/3990bfc8cd47637908eaa179802c1d91459d829b.1732083924.git.xiaopei01@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the signal
of the timer is ignored so that the timer signal can be delivered once
the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small intervals
and keeps the system pointlessly out of low power states for no value.
This is a long standing non-trivial problem due to the lock order of
posix-timer lock and the sighand lock along with life time issues as
the timer and the sigqueue have different life time rules.
Cure this by:
* Embedding the sigqueue into the timer struct to have the same life
time rules. Aside of that this also avoids the lookup of the timer
in the signal delivery and rearm path as it's just a always valid
container_of() now.
* Queuing ignored timer signals onto a seperate ignored list.
* Moving queued timer signals onto the ignored list when the signal is
switched to SIG_IGN before it could be delivered.
* Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal delivery
code to rearm the timer.
This also required to consolidate the signal delivery rules so they are
consistent across all situations. With that all self test scenarios
finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time stamps
by default and switch to fine grained time stamps when inode attributes
are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that the
VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
* Move all sleep and timeout functions into one file
* Rework udelay() and ndelay() into proper documented inline functions
and replace the hardcoded magic numbers by proper defines.
* Rework the fsleep() implementation to take the reality of the timer
wheel granularity on different HZ values into account. Right now the
boundaries are hard coded time ranges which fail to provide the
requested accuracy on different HZ settings.
* Update documentation for all sleep/timeout related functions and fix
up stale documentation links all over the place
* Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as that's
the clock which drives the timekeeping adjustments via the various user
space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file descriptor
based posix clocks, but their usability is very limited. They can't be
accessed fast as they always go all the way out to the hardware and
they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the kernel
provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework converts
timekeeping and adjtimex(2) into generic functionality which operates
on pointers to data structures instead of using static variables.
This allows to provide time accessors and adjtimex(2) functionality for
the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less straight
forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the core
code and a few usage sites of the less frequently used interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is already
prepared and scheduled for the next merge window.
- Drivers:
* Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with other
clusters.
* Mostly boring cleanups, fixes, improvements and code movement
-----BEGIN PGP SIGNATURE-----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=2VC6
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
Making sure that struct fd instances are destroyed in the same
scope where they'd been created, getting rid of reassignments
and passing them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdikAAKCRBZ7Krx/gZQ
69nJAQCmbQHK3TGUbQhOw6MJXOK9ezpyEDN3FZb4jsu38vTIdgEA6OxAYDO2m2g9
CN18glYmD3wRyU6Bwl4vGODouSJvDgA=
=gVH3
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
This laptop model requires an additional detection quirk to enable the
internal microphone
Signed-off-by: Alex Far <anf1980@gmail.com>
Link: https://patch.msgid.link/ZzjrZY3sImcqTtGx@RedmiG
Signed-off-by: Mark Brown <broonie@kernel.org>
LS7A HD-Audio disable interrupts and use polling mode due to hardware
drawbacks. As a result, unsolicited jack events are also unusable. If
we want to support headphone hotplug, we need to also poll jack events.
Here we use 1500ms as the poll interval if no module parameter specify
it.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20241115150653.2819100-1-chenhuacai@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This release was mainly about new drivers, there's a very large batch of
new drivers and devices including quite a few from newer vendors which
is great to see. Other than the new drivers and the usual routine fixes
and enhancements the bulk of the work has been Morimoto-san's continuing
work on simplifiying APIs, plus a few other bits:
- More API simplifications from Morimoto-san.
- Renaming of the sh directory to Renesas to reflect the focus on other
architectures.
- Factoring out of some of the common code for Realtek devices.
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon
I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm
SM8750, RealTek RT721, and ST Microelectronics STM32MP25.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7NioACgkQJNaLcl1U
h9CQpQf/R0SfnI7RKkYNwyqiH+aHn75bMOAq5xyGqfUIithkWXFRwi+4r08wW0yF
3u6GLgwuzjHAGzupN+TxWTucglMdzwdaL+Z+JbVwhejK0ugTz/EJOS/Y0IW+pIoX
/icQuE3fcW1ODDrDoBp8KkkjkCGwUddR6Oth75oDMEFG++ug7x8zxJEEvhZ6deFr
7UOAa22BqdCRNFWGmYJvJH31SKsapQcA237/bRTHitiNhwxIYRnQ7VvaOES7BdcT
BtL2yCjgU2o3MGwdJdj5r/tm0HC6M1o7mJF2bb3i9dos6NB4uOM9UV4dKNcdKth9
TGIbd62noD5h03HzBCplREfA3ynrsA==
=6HJR
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.13
This release was mainly about new drivers, there's a very large batch of
new drivers and devices including quite a few from newer vendors which
is great to see. Other than the new drivers and the usual routine fixes
and enhancements the bulk of the work has been Morimoto-san's continuing
work on simplifiying APIs, plus a few other bits:
- More API simplifications from Morimoto-san.
- Renaming of the sh directory to Renesas to reflect the focus on other
architectures.
- Factoring out of some of the common code for Realtek devices.
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon
I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm
SM8750, RealTek RT721, and ST Microelectronics STM32MP25.
The ordering in hdmi_codec_get_ch_alloc_table_idx() results in
wrong channel allocation for a number of cases, e.g. when ELD
reports FL|FR|LFE|FC|RL|RR or FL|FR|LFE|FC|RL|RR|RC|RLC|RRC:
ca_id 0x01 with speaker mask FL|FR|LFE is selected instead of
ca_id 0x03 with speaker mask FL|FR|LFE|FC for 4 channels
and
ca_id 0x04 with speaker mask FL|FR|RC gets selected instead of
ca_id 0x0b with speaker mask FL|FR|LFE|FC|RL|RR for 6 channels
Fix this by reordering the channel allocation list with most
specific speaker masks at the top.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://patch.msgid.link/20241115044344.3510979-1-christianshewitt@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some last updates for v6.12, one quirk plus a couple of fixes. One is a
minor fix for a relatively obscure driver and the other is a relatively
important fix for boot hangs with some audio graph based cards.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc1/0UACgkQJNaLcl1U
h9BFWwf8DVjYujeDc/qCC1k4mbgc1m4GSvUhowUbm7S+crHYrc1YD2q4Fu+HGWr9
ADj3qRWsFu66RjbXA+0Dg3yEkDp2xDAhfZ+hThlwf+0CyOY42YsnlPF0/Y87uLOS
2w/qFaSeYFrSgCJ9UjMtCVtBKJKkFmILm8sS8NrAYUsMmAl5L+HquskqBapT0tNM
Beicvth+V0sbo1aq7pdxEGu35DeJmwvXu60hmdIrwKvf5roNXV2Tn/xr4TFyo1uY
B1oyTRrhaLNrR/l0hjq20B0mkkYwH/wblp81q5Bm2mb/MmDPBDH0vYYG2rB4Y97j
lvmYCgoYEAqCPd+8hHrmOq9jhegZqg==
=kQ4k
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.12-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
Some last updates for v6.12, one quirk plus a couple of fixes. One is a
minor fix for a relatively obscure driver and the other is a relatively
important fix for boot hangs with some audio graph based cards.
Merge series from "Hendrik v. Raven" <h.v.raven@merzmedtech.de>:
This series adds support for the idle-state property from the mux
framework to the simple-mux audio variant. It allows to specify the state
of the mux when it is not in use.
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series add SoundWire machines for RT711, RT714, RT1316 and
RT722 codecs for ACP 6.3 platform. Also, it adds a generic SoundWire
machine driver code for legacy(No DSP) stack.
Realtek Gen6 AIOC supports rt712_vb on SoundWire link 2 and rt1320 on
SoundWire link 1.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20241113064418.162592-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When firmware loading is disabled, gcc warns that the local
'fw' variable fails to get initialized:
sound/soc/codecs/sma1307.c: In function 'sma1307_setting_loaded.isra':
sound/soc/codecs/sma1307.c:1717:12: error: 'fw' is used uninitialized [-Werror=uninitialized]
1717 | if (!fw) {
| ^
sound/soc/codecs/sma1307.c:1712:32: note: 'fw' was declared here
1712 | const struct firmware *fw;
Check the return code from request_firmware() to ensure that the
firmware is correctly set, and drop the incorrect release_firmware()
on that uninitialized data.
Fixes: 576c57e6b4 ("ASoC: sma1307: Add driver for Iron Device SMA1307")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20241113175734.2443315-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
So far the mux changes it state immediately, even when not in use. Allow
overriding this behaviour by specifying an optional idle-state. This
state is used whenever the mux is powered down, only switching to the
selected state on power up. If unspecified it defaults to as-is,
maintaining the previous behaviour.
Signed-off-by: Hendrik v. Raven <h.v.raven@merzmedtech.de>
Link: https://patch.msgid.link/20241114-simple-mux-idle-state-v2-1-a30cb37d2be2@merzmedtech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
sdca_lookup_functions may be called by a Peripheral that is not listed
in the ACPI table. Testing adev is required to avoid kernel NULL pointer
dereference.
Fixes: 3a513da1ae ("ASoC: SDCA: add initial module")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241113064133.162501-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable ret is being assigned a zero value however the value is
never read because ret is being re-assigned later after the end of
the switch statement. The assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20241113130807.1386754-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixed PCM device numbering is required for defining common alsa ucm
changes for generic soundwire machine driver for legacy(No DSP) stack.
Ex: For Headphone playback use case, use PCM device number as 0.
For Headset mic Capture use case, PCM device number as 1.
Set the 'use_dai_pcm_id' flag true in soundwire dma driver for acp 6.3
platform. This will fix the pcm device numbering based on dai_link->id.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20241113115223.3274868-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
get_acp63_cpu_pin_id() is the common SoundWire machine driver
helper function will be used for AMD Legacy(No DSP) generic
SoundWire machine driver as well.
Move get_acp63_cpu_pin_id() function to common place holder.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20241113115223.3274868-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch add supports for corresponding codecs on acp6.3 platform
hardware configuration.
SDW0: RT711 Jack
SDW0: RT1316 Left Speaker
SDW0: RT1316 Right Speaker
SDW1: RT714 DMIC
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20241113115223.3274868-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current 6fire code tries to release the resources right after the
call of usb6fire_chip_abort(). But at this moment, the card object
might be still in use (as we're calling snd_card_free_when_closed()).
For avoid potential UAFs, move the release of resources to the card's
private_free instead of the manual call of usb6fire_chip_destroy() at
the USB disconnect callback.
Fixes: c6d43ba816 ("ALSA: usb/6fire - Driver for TerraTec DMX 6Fire USB")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-6-tiwai@suse.de
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
This patch also splits the code to the disconnect and the free phases;
the former is called immediately at the USB disconnect callback while
the latter is called from the card destructor.
Fixes: 523f1dce37 ("[ALSA] Add Native Instrument usb audio device support")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-5-tiwai@suse.de
us122l.mmap_count field was used for counting the hwdep mmap opens and
syncing at disconnection. But such a manual sync isn't needed, as the
refcount check is done in the ALSA core side. So let's drop it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-4-tiwai@suse.de
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
The loop of us122l->mmap_count check is dropped as well. The check is
useless for the asynchronous operation with *_when_closed().
Fixes: 030a07e441 ("ALSA: Add USB US122L driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-3-tiwai@suse.de
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
Fixes: 230cd5e248 ("[ALSA] prevent oops & dead keyboard on usb unplugging while the device is be ing used")
Reported-by: syzbot+73582d08864d8268b6fd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=73582d08864d8268b6fd
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-2-tiwai@suse.de
snd_pcm_mmap_data_open() and _close() are defined as inline functions
in the public sound/pcm.h, but those are used only locally in
pcm_native.c, hence they should be better placed there.
Also, those are referred as callbacks, the useless inline is dropped.
Link: https://patch.msgid.link/20241113111628.17069-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If user no update BIOS, the speaker will no sound.
This patch support old BIOS to have sound from speaker.
Fixes: 1e707769df ("ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP EliteBook 645 G10 uses ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.
Signed-off-by: Maksym Glubokiy <maxgl.kernel@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241112154815.10888-1-maxgl.kernel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clevo platform with ALC255 Headset Mic was disable by default.
Assigned verb table for Mic pin will enable it.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/b2dcac3e09ef4f82b36d6712194e1ea4@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch switches the P-125 quirk entry to use a composite quirk as the
P-125 supplies both MIDI and Audio like many of the other Yamaha
keyboards
Signed-off-by: Eryk Zagorski <erykzagorski@gmail.com>
Link: https://patch.msgid.link/20241111164520.9079-2-erykzagorski@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The max9768 has a custom control for playback mute which unconditionally
returns 0 from the put() operation, rather than returning 1 on change to
ensure notifications are generated to userspace. Check to see if the value
has changed and return appropriately.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20241112-asoc-max9768-event-v1-1-ba5d50599787@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Simple Card Utils has simple_util_dai which is paired to snd_soc_dai,
and assmus that CPU/Codec DAI and its paired simple_util_dai are same
order for CPU/Codec
simple_util_dai[0] <--> snd_soc_dai[0]
simple_util_dai[1] <--> snd_soc_dai[1]
...
So, it is using same index in for_each loop.
(X) gets simple_util_dai
(Y) gets snd_soc_dai
(Y) for_each_rtd_cpu_dais(.., i, ..) {
(X)(A) udai = simple_props_to_dai_cpu(.., i);
}
(X) for_each_prop_dai_cpu(.., i, ...) {
(Y) dai = snd_soc_rtd_to_cpu(.., i);
...
}
But current Simple Card Utils didn't have simple_util_dai for
dummy DAI. So above (A) will get NULL pointer in such case.
This patch cares simple_util_dai for dummy DAI.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87msi5maz3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no reason to limit the supported rates of the test component
to specific ones as if it's a real piece of hardware. Set the rates to
continuous to aid in testing different rates.
Signed-off-by: John Watts <contact@jookia.org>
Link: https://patch.msgid.link/20241112-alsa_test_rates-v1-1-95cf529db871@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix an issue detected by the Smatch tool:
sound/soc/sof/ipc4-pcm.c: sof_ipc4_pcm_dai_link_fixup_rate()
error: uninitialized symbol 'be_rate'.
The warning highlights a case where `be_rate` could remain uninitialized
if `num_input_formats` is zero, which would cause undefined behavior
when setting `rate->min` and `rate->max` based on `be_rate`.
To address this issue, a `WARN_ON_ONCE(!num_input_formats)` check was
added to ensure `num_input_formats` is greater than zero. If this
condition fails, the function returns `-EINVAL`, preventing the use of
an uninitialized `be_rate`.
This change improves the robustness of the function by catching an
invalid state early and providing better feedback during development.
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Link: https://patch.msgid.link/20241107063609.11627-1-surajsonawane0215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai has rate/channels/sample_bits parameter, but it is only valid
if symmetry is being enforced by symmetric_xxx flag on driver.
It is very difficult to know about it from current naming, and easy to
misunderstand it. add symmetric_ prefix for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfmd8bnf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This codec only has one set of left and right DACs, remove the duplicate
DACs with duplicated bits controlling them as the userspace can set those
controls to mismatched value. This most likely does break userspace ABI,
but there seem to be no in-kernel users.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20241108235453.196289-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a quirk to include the codec amplifier function for this
Dell SKU.
Note: In this SKU '0CF1', the RT722 codec amplifier is
excluded, and an external amplifier is used instead.
Signed-off-by: Deep Harsora <deep_harsora@dell.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241111070618.5414-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio graph card doesn't mark its subnodes such as multi {}, dpcm {}
and c2c {} as not requiring any suppliers. This causes a hang as Linux
waits for these phantom suppliers to show up on boot.
Make it clear these nodes have no suppliers.
Example error message:
[ 15.208558] platform 2034000.i2s: deferred probe pending: platform: wait for supplier /sound/multi
[ 15.208584] platform sound: deferred probe pending: asoc-audio-graph-card2: parse error
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241108-graph_dt_fix-v1-1-173e2f9603d6@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
