mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
synced 2025-01-09 15:29:16 +00:00
5997 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Jakub Kicinski
|
8f674972d6 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/intel/iavf/iavf_ethtool.c 3a0b5a2929fd ("iavf: Introduce new state machines for flow director") 95260816b489 ("iavf: use iavf_schedule_aq_request() helper") https://lore.kernel.org/all/84e12519-04dc-bd80-bc34-8cf50d7898ce@intel.com/ drivers/net/ethernet/broadcom/bnxt/bnxt.c c13e268c0768 ("bnxt_en: Fix HWTSTAMP_FILTER_ALL packet timestamp logic") c2f8063309da ("bnxt_en: Refactor RX VLAN acceleration logic.") a7445d69809f ("bnxt_en: Add support for new RX and TPA_START completion types for P7") 1c7fd6ee2fe4 ("bnxt_en: Rename some macros for the P5 chips") https://lore.kernel.org/all/20231211110022.27926ad9@canb.auug.org.au/ drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c bd6781c18cb5 ("bnxt_en: Fix wrong return value check in bnxt_close_nic()") 84793a499578 ("bnxt_en: Skip nic close/open when configuring tstamp filters") https://lore.kernel.org/all/20231214113041.3a0c003c@canb.auug.org.au/ drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c 3d7a3f2612d7 ("net/mlx5: Nack sync reset request when HotPlug is enabled") cecf44ea1a1f ("net/mlx5: Allow sync reset flow when BF MGT interface device is present") https://lore.kernel.org/all/20231211110328.76c925af@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Linus Torvalds
|
ca20f1622b |
Char/Misc driver fixes for 6.7-rc5
Here are some small fixes for 6.7-rc5 for a variety of small driver subsystems. Included in here are: - debugfs revert for reported issue - greybus revert for reported issue - greybus fixup for endian build warning - coresight driver fixes - nvmem driver fixes - devcoredump fix - parport new device id - ndtest build fix All of these have ben in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZXRxAQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykphwCfaF0Dh6oajneYbo/pq70+an876uYAnjwALPfr g2EezrYYUAkkPACOd27t =q7gC -----END PGP SIGNATURE----- Merge tag 'char-misc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are some small fixes for 6.7-rc5 for a variety of small driver subsystems. Included in here are: - debugfs revert for reported issue - greybus revert for reported issue - greybus fixup for endian build warning - coresight driver fixes - nvmem driver fixes - devcoredump fix - parport new device id - ndtest build fix All of these have ben in linux-next with no reported issues" * tag 'char-misc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nvmem: Do not expect fixed layouts to grab a layout driver parport: Add support for Brainboxes IX/UC/PX parallel cards Revert "greybus: gb-beagleplay: Ensure le for values in transport" greybus: gb-beagleplay: Ensure le for values in transport greybus: BeaglePlay driver needs CRC_CCITT Revert "debugfs: annotate debugfs handlers vs. removal with lockdep" devcoredump: Send uevent once devcd is ready ndtest: fix typo class_regster -> class_register misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write misc: mei: client.c: return negative error code in mei_cl_write mei: pxp: fix mei_pxp_send_message return value coresight: ultrasoc-smb: Fix uninitialized before use buf_hw_base coresight: ultrasoc-smb: Config SMB buffer before register sink coresight: ultrasoc-smb: Fix sleep while close preempt in enable_smb Documentation: coresight: fix `make refcheckdocs` warning hwtracing: hisi_ptt: Don't try to attach a task hwtracing: hisi_ptt: Handle the interrupt in hardirq context hwtracing: hisi_ptt: Add dummy callback pmu::read() coresight: Fix crash when Perf and sysfs modes are used concurrently coresight: etm4x: Remove bogous __exit annotation for some functions |
||
Linus Torvalds
|
8e819a7623 |
31 hotfixes. 10 of these address pre-6.6 issues and are marked cc:stable.
The remainder address post-6.6 issues or aren't considered serious enough to justify backporting. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZXKEfwAKCRDdBJ7gKXxA jlRpAQCiAp1nSqIz/fOKTzoQRaTDXU/m+C+6ZAXdKLDfvQBhpwEAnxxjZ8IgF+8Z Klz/GirHX5w5o7jE2wb8iObo1nR75Qo= =omRq -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "31 hotfixes. Ten of these address pre-6.6 issues and are marked cc:stable. The remainder address post-6.6 issues or aren't considered serious enough to justify backporting" * tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits) mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range() nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage() mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI scripts/gdb: fix lx-device-list-bus and lx-device-list-class MAINTAINERS: drop Antti Palosaari highmem: fix a memory copy problem in memcpy_from_folio nilfs2: fix missing error check for sb_set_blocksize call kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP units: add missing header drivers/base/cpu: crash data showing should depends on KEXEC_CORE mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions scripts/gdb/tasks: fix lx-ps command error mm/Kconfig: make userfaultfd a menuconfig selftests/mm: prevent duplicate runs caused by TEST_GEN_PROGS mm/damon/core: copy nr_accesses when splitting region lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly checkstack: fix printed address mm/memory_hotplug: fix error handling in add_memory_resource() mm/memory_hotplug: add missing mem_hotplug_lock .mailmap: add a new address mapping for Chester Lin ... |
||
Jakub Kicinski
|
2483e7f04c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/stmicro/stmmac/dwmac5.c drivers/net/ethernet/stmicro/stmmac/dwmac5.h drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c drivers/net/ethernet/stmicro/stmmac/hwif.h 37e4b8df27bc ("net: stmmac: fix FPE events losing") c3f3b97238f6 ("net: stmmac: Refactor EST implementation") https://lore.kernel.org/all/20231206110306.01e91114@canb.auug.org.au/ Adjacent changes: net/ipv4/tcp_ao.c 9396c4ee93f9 ("net/tcp: Don't store TCP-AO maclen on reqsk") 7b0f570f879a ("tcp: Move TCP-AO bits from cookie_v[46]_check() to tcp_ao_syncookie().") Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Baoquan He
|
4e9e2e4c65 |
drivers/base/cpu: crash data showing should depends on KEXEC_CORE
After commit 88a6f8994421 ("crash: memory and CPU hotplug sysfs attributes"), on x86_64, if only below kernel configs related to kdump are set, compiling error are triggered. ---- CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y CONFIG_CRASH_HOTPLUG=y ------ ------------------------------------------------------ drivers/base/cpu.c: In function `crash_hotplug_show': drivers/base/cpu.c:309:40: error: implicit declaration of function `crash_hotplug_cpu_support'; did you mean `crash_hotplug_show'? [-Werror=implicit-function-declaration] 309 | return sysfs_emit(buf, "%d\n", crash_hotplug_cpu_support()); | ^~~~~~~~~~~~~~~~~~~~~~~~~ | crash_hotplug_show cc1: some warnings being treated as errors ------------------------------------------------------ CONFIG_KEXEC is used to enable kexec_load interface, the crash_notes/crash_notes_size/crash_hotplug showing depends on CONFIG_KEXEC is incorrect. It should depend on KEXEC_CORE instead. Fix it now. Link: https://lkml.kernel.org/r/20231128055248.659808-1-bhe@redhat.com Fixes: 88a6f8994421 ("crash: memory and CPU hotplug sysfs attributes") Signed-off-by: Baoquan He <bhe@redhat.com> Tested-by: Ignat Korchagin <ignat@cloudflare.com> [compile-time only] Tested-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Sumanth Korikkar
|
001002e737 |
mm/memory_hotplug: add missing mem_hotplug_lock
From Documentation/core-api/memory-hotplug.rst: When adding/removing/onlining/offlining memory or adding/removing heterogeneous/device memory, we should always hold the mem_hotplug_lock in write mode to serialise memory hotplug (e.g. access to global/zone variables). mhp_(de)init_memmap_on_memory() functions can change zone stats and struct page content, but they are currently called w/o the mem_hotplug_lock. When memory block is being offlined and when kmemleak goes through each populated zone, the following theoretical race conditions could occur: CPU 0: | CPU 1: memory_offline() | -> offline_pages() | -> mem_hotplug_begin() | ... | -> mem_hotplug_done() | | kmemleak_scan() | -> get_online_mems() | ... -> mhp_deinit_memmap_on_memory() | [not protected by mem_hotplug_begin/done()]| Marks memory section as offline, | Retrieves zone_start_pfn poisons vmemmap struct pages and updates | and struct page members. the zone related data | | ... | -> put_online_mems() Fix this by ensuring mem_hotplug_lock is taken before performing mhp_init_memmap_on_memory(). Also ensure that mhp_deinit_memmap_on_memory() holds the lock. online/offline_pages() are currently only called from memory_block_online/offline(), so it is safe to move the locking there. Link: https://lkml.kernel.org/r/20231120145354.308999-2-sumanthk@linux.ibm.com Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range") Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: kernel test robot <lkp@intel.com> Cc: <stable@vger.kernel.org> [5.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Matthias Reichl
|
fea8806444
|
regmap: fix bogus error on regcache_sync success
Since commit 0ec7731655de ("regmap: Ensure range selector registers are updated after cache sync") opening pcm512x based soundcards fail with EINVAL and dmesg shows sync cache and pm_runtime_get errors: [ 228.794676] pcm512x 1-004c: Failed to sync cache: -22 [ 228.794740] pcm512x 1-004c: ASoC: error at snd_soc_pcm_component_pm_runtime_get on pcm512x.1-004c: -22 This is caused by the cache check result leaking out into the regcache_sync return value. Fix this by making the check local-only, as the comment above the regcache_read call states a non-zero return value means there's nothing to do so the return value should not be altered. Fixes: 0ec7731655de ("regmap: Ensure range selector registers are updated after cache sync") Cc: stable@vger.kernel.org Signed-off-by: Matthias Reichl <hias@horus.com> Link: https://lore.kernel.org/r/20231203222216.96547-1-hias@horus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Mukesh Ojha
|
af54d778a0 |
devcoredump: Send uevent once devcd is ready
dev_coredumpm() creates a devcoredump device and adds it to the core kernel framework which eventually end up sending uevent to the user space and later creates a symbolic link to the failed device. An application running in userspace may be interested in this symbolic link to get the name of the failed device. In a issue scenario, once uevent sent to the user space it start reading '/sys/class/devcoredump/devcdX/failing_device' to get the actual name of the device which might not been created and it is in its path of creation. To fix this, suppress sending uevent till the failing device symbolic link gets created and send uevent once symbolic link is created successfully. Fixes: 833c95456a70 ("device coredump: add new device coredump class") Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1700232572-25823-1-git-send-email-quic_mojha@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Kory Maincent
|
a066f906ba |
firmware_loader: Expand Firmware upload error codes with firmware invalid error
No error code are available to signal an invalid firmware content. Drivers that can check the firmware content validity can not return this specific failure to the user-space Expand the firmware error code with an additional code: - "firmware invalid" code which can be used when the provided firmware is invalid Sync lib/test_firmware.c file accordingly. Acked-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231122-feature_firmware_error_code-v3-1-04ec753afb71@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Linus Torvalds
|
eaec7c9892 |
regmap: Fix for v6.7
One fix here, for an interaction between noinc registers and caches - if a device uses noinc registers (which is rare) then we could corrupt registers after the noinc register in the cache. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmVKGw8ACgkQJNaLcl1U h9C8Bwf/U2a00UtJqvg+deoXHQ/7QY8w093DnHxdTLyUcDvwffbfTMrPPOmPtRLh 1OYTtPPAgcF2PjyMaazHON2Y3a1/jPLEyjfRI3UmMWoVCVObUzh30ARASdRlvZj0 1bnj88v32W2hFu/TuUPVVii3g2qH3XccEvX/JaNm0yG9lBHfugPGbVOI2S+MzWL9 iFq+nYyqi6RzD7gq99ZaoA6UdacbCyPWgvHKxoZqhknTlX/KQQDdBlq2alhmbOoU lW3t9dwtZlcoskSTmKDI7Ukz0EnRvK1fcrkhZ/3XrQl349eLmtqcG7rM/ZMoORqL wx8eoxNCyCDnjxV+QfEL6SSQEX+8Mg== =M81g -----END PGP SIGNATURE----- Merge tag 'regmap-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "One fix here, for an interaction between noinc registers and caches. If a device uses noinc registers (which is rare) then we could corrupt registers after the noinc register in the cache" * tag 'regmap-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: prevent noinc writes from clobbering cache |
||
Linus Torvalds
|
b06f58ad8e |
Driver core changes for 6.7-rc1
Here is the set of driver core updates for 6.7-rc1. Nothing major in here at all, just a small number of changes including: - minor cleanups and updates from Andy Shevchenko - __counted_by addition - firmware_loader update for aborting loads cleaner - other minor changes, details in the shortlog - documentation update All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTe8A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynP0QCfT2jQx3OcL22MoqCvdTuZJKPiHSIAoMxrliJF d4cUeICW17ywlTFzsKg8 =nTeu -----END PGP SIGNATURE----- Merge tag 'driver-core-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core updates for 6.7-rc1. Nothing major in here at all, just a small number of changes including: - minor cleanups and updates from Andy Shevchenko - __counted_by addition - firmware_loader update for aborting loads cleaner - other minor changes, details in the shortlog - documentation update All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits) firmware_loader: Abort all upcoming firmware load request once reboot triggered firmware_loader: Refactor kill_pending_fw_fallback_reqs() Documentation: security-bugs.rst: linux-distros relaxed their rules driver core: Release all resources during unbind before updating device links driver core: class: remove boilerplate code driver core: platform: Annotate struct irq_affinity_devres with __counted_by resource: Constify resource crosscheck APIs resource: Unify next_resource() and next_resource_skip_children() resource: Reuse for_each_resource() macro PCI: Implement custom llseek for sysfs resource entries kernfs: sysfs: support custom llseek method for sysfs entries debugfs: Fix __rcu type comparison warning device property: Replace custom implementation of COUNT_ARGS() drivers: base: test: Make property entry API test modular driver core: Add missing parameter description to __fwnode_link_add() device property: Clarify usage scope of some struct fwnode_handle members devres: rename the first parameter of devm_add_action(_or_reset) driver core: platform: Unify the firmware node type check driver core: platform: Use temporary variable in platform_device_add() driver core: platform: Refactor error path in a couple places ... |
||
Linus Torvalds
|
ecae0bd517 |
Many singleton patches against the MM code. The patch series which are
included in this merge do the following: - Kemeng Shi has contributed some compation maintenance work in the series "Fixes and cleanups to compaction". - Joel Fernandes has a patchset ("Optimize mremap during mutual alignment within PMD") which fixes an obscure issue with mremap()'s pagetable handling during a subsequent exec(), based upon an implementation which Linus suggested. - More DAMON/DAMOS maintenance and feature work from SeongJae Park i the following patch series: mm/damon: misc fixups for documents, comments and its tracepoint mm/damon: add a tracepoint for damos apply target regions mm/damon: provide pseudo-moving sum based access rate mm/damon: implement DAMOS apply intervals mm/damon/core-test: Fix memory leaks in core-test mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval - In the series "Do not try to access unaccepted memory" Adrian Hunter provides some fixups for the recently-added "unaccepted memory' feature. To increase the feature's checking coverage. "Plug a few gaps where RAM is exposed without checking if it is unaccepted memory". - In the series "cleanups for lockless slab shrink" Qi Zheng has done some maintenance work which is preparation for the lockless slab shrinking code. - Qi Zheng has redone the earlier (and reverted) attempt to make slab shrinking lockless in the series "use refcount+RCU method to implement lockless slab shrink". - David Hildenbrand contributes some maintenance work for the rmap code in the series "Anon rmap cleanups". - Kefeng Wang does more folio conversions and some maintenance work in the migration code. Series "mm: migrate: more folio conversion and unification". - Matthew Wilcox has fixed an issue in the buffer_head code which was causing long stalls under some heavy memory/IO loads. Some cleanups were added on the way. Series "Add and use bdev_getblk()". - In the series "Use nth_page() in place of direct struct page manipulation" Zi Yan has fixed a potential issue with the direct manipulation of hugetlb page frames. - In the series "mm: hugetlb: Skip initialization of gigantic tail struct pages if freed by HVO" has improved our handling of gigantic pages in the hugetlb vmmemmep optimizaton code. This provides significant boot time improvements when significant amounts of gigantic pages are in use. - Matthew Wilcox has sent the series "Small hugetlb cleanups" - code rationalization and folio conversions in the hugetlb code. - Yin Fengwei has improved mlock()'s handling of large folios in the series "support large folio for mlock" - In the series "Expose swapcache stat for memcg v1" Liu Shixin has added statistics for memcg v1 users which are available (and useful) under memcg v2. - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable) prctl so that userspace may direct the kernel to not automatically propagate the denial to child processes. The series is named "MDWE without inheritance". - Kefeng Wang has provided the series "mm: convert numa balancing functions to use a folio" which does what it says. - In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch makes is possible for a process to propagate KSM treatment across exec(). - Huang Ying has enhanced memory tiering's calculation of memory distances. This is used to permit the dax/kmem driver to use "high bandwidth memory" in addition to Optane Data Center Persistent Memory Modules (DCPMM). The series is named "memory tiering: calculate abstract distance based on ACPI HMAT" - In the series "Smart scanning mode for KSM" Stefan Roesch has optimized KSM by teaching it to retain and use some historical information from previous scans. - Yosry Ahmed has fixed some inconsistencies in memcg statistics in the series "mm: memcg: fix tracking of pending stats updates values". - In the series "Implement IOCTL to get and optionally clear info about PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits us to atomically read-then-clear page softdirty state. This is mainly used by CRIU. - Hugh Dickins contributed the series "shmem,tmpfs: general maintenance" - a bunch of relatively minor maintenance tweaks to this code. - Matthew Wilcox has increased the use of the VMA lock over file-backed page faults in the series "Handle more faults under the VMA lock". Some rationalizations of the fault path became possible as a result. - In the series "mm/rmap: convert page_move_anon_rmap() to folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups and folio conversions. - In the series "various improvements to the GUP interface" Lorenzo Stoakes has simplified and improved the GUP interface with an eye to providing groundwork for future improvements. - Andrey Konovalov has sent along the series "kasan: assorted fixes and improvements" which does those things. - Some page allocator maintenance work from Kemeng Shi in the series "Two minor cleanups to break_down_buddy_pages". - In thes series "New selftest for mm" Breno Leitao has developed another MM self test which tickles a race we had between madvise() and page faults. - In the series "Add folio_end_read" Matthew Wilcox provides cleanups and an optimization to the core pagecache code. - Nhat Pham has added memcg accounting for hugetlb memory in the series "hugetlb memcg accounting". - Cleanups and rationalizations to the pagemap code from Lorenzo Stoakes, in the series "Abstract vma_merge() and split_vma()". - Audra Mitchell has fixed issues in the procfs page_owner code's new timestamping feature which was causing some misbehaviours. In the series "Fix page_owner's use of free timestamps". - Lorenzo Stoakes has fixed the handling of new mappings of sealed files in the series "permit write-sealed memfd read-only shared mappings". - Mike Kravetz has optimized the hugetlb vmemmap optimization in the series "Batch hugetlb vmemmap modification operations". - Some buffer_head folio conversions and cleanups from Matthew Wilcox in the series "Finish the create_empty_buffers() transition". - As a page allocator performance optimization Huang Ying has added automatic tuning to the allocator's per-cpu-pages feature, in the series "mm: PCP high auto-tuning". - Roman Gushchin has contributed the patchset "mm: improve performance of accounted kernel memory allocations" which improves their performance by ~30% as measured by a micro-benchmark. - folio conversions from Kefeng Wang in the series "mm: convert page cpupid functions to folios". - Some kmemleak fixups in Liu Shixin's series "Some bugfix about kmemleak". - Qi Zheng has improved our handling of memoryless nodes by keeping them off the allocation fallback list. This is done in the series "handle memoryless nodes more appropriately". - khugepaged conversions from Vishal Moola in the series "Some khugepaged folio conversions". -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y FgeUPAD1oasg6CP+INZvCj34waNxwAc= =E+Y4 -----END PGP SIGNATURE----- Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Many singleton patches against the MM code. The patch series which are included in this merge do the following: - Kemeng Shi has contributed some compation maintenance work in the series 'Fixes and cleanups to compaction' - Joel Fernandes has a patchset ('Optimize mremap during mutual alignment within PMD') which fixes an obscure issue with mremap()'s pagetable handling during a subsequent exec(), based upon an implementation which Linus suggested - More DAMON/DAMOS maintenance and feature work from SeongJae Park i the following patch series: mm/damon: misc fixups for documents, comments and its tracepoint mm/damon: add a tracepoint for damos apply target regions mm/damon: provide pseudo-moving sum based access rate mm/damon: implement DAMOS apply intervals mm/damon/core-test: Fix memory leaks in core-test mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval - In the series 'Do not try to access unaccepted memory' Adrian Hunter provides some fixups for the recently-added 'unaccepted memory' feature. To increase the feature's checking coverage. 'Plug a few gaps where RAM is exposed without checking if it is unaccepted memory' - In the series 'cleanups for lockless slab shrink' Qi Zheng has done some maintenance work which is preparation for the lockless slab shrinking code - Qi Zheng has redone the earlier (and reverted) attempt to make slab shrinking lockless in the series 'use refcount+RCU method to implement lockless slab shrink' - David Hildenbrand contributes some maintenance work for the rmap code in the series 'Anon rmap cleanups' - Kefeng Wang does more folio conversions and some maintenance work in the migration code. Series 'mm: migrate: more folio conversion and unification' - Matthew Wilcox has fixed an issue in the buffer_head code which was causing long stalls under some heavy memory/IO loads. Some cleanups were added on the way. Series 'Add and use bdev_getblk()' - In the series 'Use nth_page() in place of direct struct page manipulation' Zi Yan has fixed a potential issue with the direct manipulation of hugetlb page frames - In the series 'mm: hugetlb: Skip initialization of gigantic tail struct pages if freed by HVO' has improved our handling of gigantic pages in the hugetlb vmmemmep optimizaton code. This provides significant boot time improvements when significant amounts of gigantic pages are in use - Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code rationalization and folio conversions in the hugetlb code - Yin Fengwei has improved mlock()'s handling of large folios in the series 'support large folio for mlock' - In the series 'Expose swapcache stat for memcg v1' Liu Shixin has added statistics for memcg v1 users which are available (and useful) under memcg v2 - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable) prctl so that userspace may direct the kernel to not automatically propagate the denial to child processes. The series is named 'MDWE without inheritance' - Kefeng Wang has provided the series 'mm: convert numa balancing functions to use a folio' which does what it says - In the series 'mm/ksm: add fork-exec support for prctl' Stefan Roesch makes is possible for a process to propagate KSM treatment across exec() - Huang Ying has enhanced memory tiering's calculation of memory distances. This is used to permit the dax/kmem driver to use 'high bandwidth memory' in addition to Optane Data Center Persistent Memory Modules (DCPMM). The series is named 'memory tiering: calculate abstract distance based on ACPI HMAT' - In the series 'Smart scanning mode for KSM' Stefan Roesch has optimized KSM by teaching it to retain and use some historical information from previous scans - Yosry Ahmed has fixed some inconsistencies in memcg statistics in the series 'mm: memcg: fix tracking of pending stats updates values' - In the series 'Implement IOCTL to get and optionally clear info about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits us to atomically read-then-clear page softdirty state. This is mainly used by CRIU - Hugh Dickins contributed the series 'shmem,tmpfs: general maintenance', a bunch of relatively minor maintenance tweaks to this code - Matthew Wilcox has increased the use of the VMA lock over file-backed page faults in the series 'Handle more faults under the VMA lock'. Some rationalizations of the fault path became possible as a result - In the series 'mm/rmap: convert page_move_anon_rmap() to folio_move_anon_rmap()' David Hildenbrand has implemented some cleanups and folio conversions - In the series 'various improvements to the GUP interface' Lorenzo Stoakes has simplified and improved the GUP interface with an eye to providing groundwork for future improvements - Andrey Konovalov has sent along the series 'kasan: assorted fixes and improvements' which does those things - Some page allocator maintenance work from Kemeng Shi in the series 'Two minor cleanups to break_down_buddy_pages' - In thes series 'New selftest for mm' Breno Leitao has developed another MM self test which tickles a race we had between madvise() and page faults - In the series 'Add folio_end_read' Matthew Wilcox provides cleanups and an optimization to the core pagecache code - Nhat Pham has added memcg accounting for hugetlb memory in the series 'hugetlb memcg accounting' - Cleanups and rationalizations to the pagemap code from Lorenzo Stoakes, in the series 'Abstract vma_merge() and split_vma()' - Audra Mitchell has fixed issues in the procfs page_owner code's new timestamping feature which was causing some misbehaviours. In the series 'Fix page_owner's use of free timestamps' - Lorenzo Stoakes has fixed the handling of new mappings of sealed files in the series 'permit write-sealed memfd read-only shared mappings' - Mike Kravetz has optimized the hugetlb vmemmap optimization in the series 'Batch hugetlb vmemmap modification operations' - Some buffer_head folio conversions and cleanups from Matthew Wilcox in the series 'Finish the create_empty_buffers() transition' - As a page allocator performance optimization Huang Ying has added automatic tuning to the allocator's per-cpu-pages feature, in the series 'mm: PCP high auto-tuning' - Roman Gushchin has contributed the patchset 'mm: improve performance of accounted kernel memory allocations' which improves their performance by ~30% as measured by a micro-benchmark - folio conversions from Kefeng Wang in the series 'mm: convert page cpupid functions to folios' - Some kmemleak fixups in Liu Shixin's series 'Some bugfix about kmemleak' - Qi Zheng has improved our handling of memoryless nodes by keeping them off the allocation fallback list. This is done in the series 'handle memoryless nodes more appropriately' - khugepaged conversions from Vishal Moola in the series 'Some khugepaged folio conversions'" [ bcachefs conflicts with the dynamically allocated shrinkers have been resolved as per Stephen Rothwell in https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/ with help from Qi Zheng. The clone3 test filtering conflict was half-arsed by yours truly ] * tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits) mm/damon/sysfs: update monitoring target regions for online input commit mm/damon/sysfs: remove requested targets when online-commit inputs selftests: add a sanity check for zswap Documentation: maple_tree: fix word spelling error mm/vmalloc: fix the unchecked dereference warning in vread_iter() zswap: export compression failure stats Documentation: ubsan: drop "the" from article title mempolicy: migration attempt to match interleave nodes mempolicy: mmap_lock is not needed while migrating folios mempolicy: alloc_pages_mpol() for NUMA policy without vma mm: add page_rmappable_folio() wrapper mempolicy: remove confusing MPOL_MF_LAZY dead code mempolicy: mpol_shared_policy_init() without pseudo-vma mempolicy trivia: use pgoff_t in shared mempolicy tree mempolicy trivia: slightly more consistent naming mempolicy trivia: delete those ancient pr_debug()s mempolicy: fix migrate_pages(2) syscall return nr_failed kernfs: drop shared NUMA mempolicy hooks hugetlbfs: drop shared NUMA mempolicy pretence mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets() ... |
||
Linus Torvalds
|
426ee5196d |
sysctl-6.7-rc1
To help make the move of sysctls out of kernel/sysctl.c not incur a size penalty sysctl has been changed to allow us to not require the sentinel, the final empty element on the sysctl array. Joel Granados has been doing all this work. On the v6.6 kernel we got the major infrastructure changes required to support this. For v6.7-rc1 we have all arch/ and drivers/ modified to remove the sentinel. Both arch and driver changes have been on linux-next for a bit less than a month. It is worth re-iterating the value: - this helps reduce the overall build time size of the kernel and run time memory consumed by the kernel by about ~64 bytes per array - the extra 64-byte penalty is no longer inncurred now when we move sysctls out from kernel/sysctl.c to their own files For v6.8-rc1 expect removal of all the sentinels and also then the unneeded check for procname == NULL. The last 2 patches are fixes recently merged by Krister Johansen which allow us again to use softlockup_panic early on boot. This used to work but the alias work broke it. This is useful for folks who want to detect softlockups super early rather than wait and spend money on cloud solutions with nothing but an eventual hung kernel. Although this hadn't gone through linux-next it's also a stable fix, so we might as well roll through the fixes now. -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmVCqKsSHG1jZ3JvZkBr ZXJuZWwub3JnAAoJEM4jHQowkoinEgYQAIpkqRL85DBwems19Uk9A27lkctwZ6Fc HdslQCObQTsbuKVimZFP4IL2beUfUE0cfLZCXlzp+4nRDOf6vyhyf3w19jPQtI0Q YdqwTk9y6G5VjDsb35QK0+UBloY/kZ1H3/LW4uCwjXTuksUGmWW2Qvey35696Scv hDMLADqKQmdpYxLUaNi9QyYbEAjYtOai2ezg3+i7hTG168t1k/Ab2BxIFrPVsCR2 FAiq05L4ugWjNskdsWBjck05JZsx9SK/qcAxpIPoUm4nGiFNHApXE0E0hs3vsnmn WIHIbxCQw8ZlUDlmw4S+0YH3NFFzFbWfmW8k2b0f2qZTJm/rU4KiJfcJVknkAUVF raFox6XDW0AUQ9L/NOUJ9ip5rup57GcFrMYocdJ3PPAvvmHKOb1D1O741p75RRcc 9j7zwfIRrzjPUqzhsQS/GFjdJu3lJNmEBK1AcgrVry6WoItrAzJHKPPDC7TwaNmD eXpjxMl1sYzzHqtVh4hn+xkUYphj/6gTGMV8zdo+/FopFswgeJW9G8kHtlEWKDPk MRIKwACmfetP6f3ngHunBg+BOipbjCANL7JI0nOhVOQoaULxCCPx+IPJ6GfSyiuH AbcjH8DGI7fJbUkBFoF0dsRFZ2gH8ds1PYMbWUJ6x3FtuCuv5iIuvQYoaWU6itm7 6f0KvCogg0fU =Qf50 -----END PGP SIGNATURE----- Merge tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "To help make the move of sysctls out of kernel/sysctl.c not incur a size penalty sysctl has been changed to allow us to not require the sentinel, the final empty element on the sysctl array. Joel Granados has been doing all this work. On the v6.6 kernel we got the major infrastructure changes required to support this. For v6.7-rc1 we have all arch/ and drivers/ modified to remove the sentinel. Both arch and driver changes have been on linux-next for a bit less than a month. It is worth re-iterating the value: - this helps reduce the overall build time size of the kernel and run time memory consumed by the kernel by about ~64 bytes per array - the extra 64-byte penalty is no longer inncurred now when we move sysctls out from kernel/sysctl.c to their own files For v6.8-rc1 expect removal of all the sentinels and also then the unneeded check for procname == NULL. The last two patches are fixes recently merged by Krister Johansen which allow us again to use softlockup_panic early on boot. This used to work but the alias work broke it. This is useful for folks who want to detect softlockups super early rather than wait and spend money on cloud solutions with nothing but an eventual hung kernel. Although this hadn't gone through linux-next it's also a stable fix, so we might as well roll through the fixes now" * tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits) watchdog: move softlockup_panic back to early_param proc: sysctl: prevent aliased sysctls from getting passed to init intel drm: Remove now superfluous sentinel element from ctl_table array Drivers: hv: Remove now superfluous sentinel element from ctl_table array raid: Remove now superfluous sentinel element from ctl_table array fw loader: Remove the now superfluous sentinel element from ctl_table array sgi-xp: Remove the now superfluous sentinel element from ctl_table array vrf: Remove the now superfluous sentinel element from ctl_table array char-misc: Remove the now superfluous sentinel element from ctl_table array infiniband: Remove the now superfluous sentinel element from ctl_table array macintosh: Remove the now superfluous sentinel element from ctl_table array parport: Remove the now superfluous sentinel element from ctl_table array scsi: Remove now superfluous sentinel element from ctl_table array tty: Remove now superfluous sentinel element from ctl_table array xen: Remove now superfluous sentinel element from ctl_table array hpet: Remove now superfluous sentinel element from ctl_table array c-sky: Remove now superfluous sentinel element from ctl_talbe array powerpc: Remove now superfluous sentinel element from ctl_table arrays riscv: Remove now superfluous sentinel element from ctl_table array x86/vdso: Remove now superfluous sentinel element from ctl_table array ... |
||
Linus Torvalds
|
385903a7ec |
SoC driver updates for 6.7
The highlights for the driver support this time are - Qualcomm platforms gain support for the Qualcomm Secure Execution Environment firmware interface to access EFI variables on certain devices, and new features for multiple platform and firmware drivers. - Arm FF-A firmware support gains support for v1.1 specification features, in particular notification and memory transaction descriptor changes. - SCMI firmware support now support v3.2 features for clock and DVFS configuration and a new transport for Qualcomm platforms. - Minor cleanups and bugfixes are added to pretty much all the active platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive, amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and more. In particular, this contains portions of the treewide conversion to use __counted_by annotations and the device_get_match_data helper. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmVC10IACgkQYKtH/8kJ UifFoQ//Tw7aux88EA2UkyL2Wulv80NwRQn3tQlxI/6ltjBX64yeQ6Y8OzmYdSYK 20NEpbU7VWOFftN+D6Jp1HLrvfi0OV9uJn3WiTX3ChgDXixpOXo4TYgNNTlb9uZ4 MrSTG3NkS27m/oTaCmYprOObgSNLq1FRCGIP7w4U9gyMk9N9FSKMpSJjlH06qPz6 WBLTaIwPgBsyrLfCdxfA1y7AFCAHVxQJO4bp0VWSIalTrneGTeQrd2FgYMUesQ2e fIUNCaU4mpmj8XnQ/W19Wsek8FRB+fOh0hn/Gl+iHYibpxusIsn7bkdZ5BOJn2J0 OY3C1biopaaxXcZ+wmnX9X0ieZ3TDsHzYOEf0zmNGzMZaZkV8kQt4/Ykv77xz6Gc 4Bl6JI5QZ4rTZvlHYGMYxhy3hKuB31mO2rHbei7eR7J7UmjzWcl5P6HYfCgj7wzH crIWj1IR1Nx6Dt/wXf3HlRcEiAEJ2D0M3KIFjAVT239TsxacBfDrRk+YedF2bKbn WMYfVM6jJnPOykGg/gMRlttS/o/7TqHBl3y/900Idiijcm3cRPbQ+uKfkpHXftN/ 2vOtsw7pzEg7QQI9GVrb4drTrLvYJ7GQOi4o0twXTCshlXUk2V684jvHt0emFkdX ew9Zft4YLAYSmuJ3XqGhhMP63FsHKMlB1aSTKKPeswdIJmrdO80= =QIut -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "The highlights for the driver support this time are - Qualcomm platforms gain support for the Qualcomm Secure Execution Environment firmware interface to access EFI variables on certain devices, and new features for multiple platform and firmware drivers. - Arm FF-A firmware support gains support for v1.1 specification features, in particular notification and memory transaction descriptor changes. - SCMI firmware support now support v3.2 features for clock and DVFS configuration and a new transport for Qualcomm platforms. - Minor cleanups and bugfixes are added to pretty much all the active platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive, amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and more. In particular, this contains portions of the treewide conversion to use __counted_by annotations and the device_get_match_data helper" * tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits) soc: qcom: pmic_glink_altmode: Print return value on error firmware: qcom: scm: remove unneeded 'extern' specifiers firmware: qcom: scm: add a missing forward declaration for struct device firmware: qcom: move Qualcomm code into its own directory soc: samsung: exynos-chipid: Convert to platform remove callback returning void soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size() soc: qcom: pmic_glink: fix connector type to be DisplayPort soc: ti: k3-socinfo: Avoid overriding return value soc: ti: k3-socinfo: Fix typo in bitfield documentation soc: ti: knav_qmss_queue: Use device_get_match_data() firmware: ti_sci: Use device_get_match_data() firmware: qcom: qseecom: add missing include guards soc/pxa: ssp: Convert to platform remove callback returning void soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void soc/mediatek: mtk-devapc: Convert to platform remove callback returning void soc/loongson: loongson2_guts: Convert to platform remove callback returning void soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void ... |
||
Ben Wolsieffer
|
984a4afdc8
|
regmap: prevent noinc writes from clobbering cache
Currently, noinc writes are cached as if they were standard incrementing writes, overwriting unrelated register values in the cache. Instead, we want to cache the last value written to the register, as is done in the accelerated noinc handler (regmap_noinc_readwrite). Fixes: cdf6b11daa77 ("regmap: Add regmap_noinc_write API") Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com> Link: https://lore.kernel.org/r/20231101142926.2722603-2-ben.wolsieffer@hefring.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Linus Torvalds
|
5cbff4b2d9 |
regmap: Updates for v6.7
The main change here is a fix for an issue where we were letting the selector for windowed register ranges get out of sync with the hardware during a cache sync plus associated KUnit tests. This was reported just at the end of the release cycle and only in -next for a day prior to the merge window so it seemed better to hold off for now, the bug had been present for more than a decade so wasn't causing too many practical problems hopefully. There's also a fix for error handling in the debugfs output from Christope Jaillet. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmU/qxsACgkQJNaLcl1U h9CvIgf+JL9LrFApTZliWjEPg1K8CxhRzoFRxUb0tP47f0cJ7zJ6+5uv5GGbfj3N liZvRIMetTs8jk4T/avahS1t55XZ9EkGlItsAFny83otfOw5xA6WOqFTRl5D39G6 yHSJw1gyX+4L5lhJrWbEZG7/SgpKjptZQH6j1/4cwXYTU19gpriypJi4P9nBOzyw GXJqQzTgq8LMdF7twPLR6QipgoE5Z3Oum6qM6C8FfibH/+AsbctzboUhXpJxIO2j CdnYxCkW2Bu8Y0ngkayz0Hj6UnEntRpHklzJeSiP0cVy8xm4DemFSbOB5l6dQ20O RWwpnXfQPYtaMzruKRd3FYNQRrOM9Q== =mrBL -----END PGP SIGNATURE----- Merge tag 'regmap-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "The main change here is a fix for an issue where we were letting the selector for windowed register ranges get out of sync with the hardware during a cache sync plus associated KUnit tests. This was reported just at the end of the release cycle and only in -next for a day prior to the merge window so it seemed better to hold off for now, the bug had been present for more than a decade so wasn't causing too many practical problems hopefully. There's also a fix for error handling in the debugfs output from Christope Jaillet" * tag 'regmap-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Ensure range selector registers are updated after cache sync regmap: kunit: Add test for cache sync interaction with ranges regmap: kunit: Fix marking of the range window as volatile regmap: debugfs: Fix a erroneous check after snprintf() |
||
Mark Brown
|
6bbebcc11a
|
regmap: Merge up fix for window/paging issue
This was too late and could potentially impact too many drivers for me to be comfortable sending it before the merge window. |
||
Mukesh Ojha
|
effd7c70ea |
firmware_loader: Abort all upcoming firmware load request once reboot triggered
There could be following scenario where there is a ongoing reboot is going from processA which tries to call all the reboot notifier callback and one of them is firmware reboot call which tries to abort all the ongoing firmware userspace request under fw_lock but there could be another processB which tries to do request firmware, which came just after abort done from ProcessA and ask for userspace to load the firmware and this can stop the ongoing reboot ProcessA to stall for next 60s(default timeout) which may not be expected behaviour everyone like to see, instead we should abort any firmware load request which came once firmware knows about the reboot through notification. ProcessA ProcessB kernel_restart_prepare blocking_notifier_call_chain fw_shutdown_notify kill_pending_fw_fallback_reqs __fw_load_abort fw_state_aborted request_firmware __fw_state_set firmware_fallback_sysfs ... fw_load_from_user_helper .. ... . .. usermodehelper_read_trylock fw_load_sysfs_fallback fw_sysfs_wait_timeout usermodehelper_disable __usermodehelper_disable down_write() Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/1698330459-31776-2-git-send-email-quic_mojha@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Mukesh Ojha
|
87ffa98eee |
firmware_loader: Refactor kill_pending_fw_fallback_reqs()
Rename 'only_kill_custom' and refactor logic related to it to be more meaningful. Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/1698330459-31776-1-git-send-email-quic_mojha@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Mark Brown
|
0ec7731655
|
regmap: Ensure range selector registers are updated after cache sync
When we sync the register cache we do so with the cache bypassed in order to avoid overhead from writing the synced values back into the cache. If the regmap has ranges and the selector register for those ranges is in a register which is cached this has the unfortunate side effect of meaning that the physical and cached copies of the selector register can be out of sync after a cache sync. The cache will have whatever the selector was when the sync started and the hardware will have the selector for the register that was synced last. Fix this by rewriting all cached selector registers after every sync, ensuring that the hardware and cache have the same content. This will result in extra writes that wouldn't otherwise be needed but is simple so hopefully robust. We don't read from the hardware since not all devices have physical read support. Given that nobody noticed this until now it is likely that we are rarely if ever hitting this case. Reported-by: Hector Martin <marcan@marcan.st> Cc: stable@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231026-regmap-fix-selector-sync-v1-1-633ded82770d@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Mark Brown
|
6a2e332c2c
|
regmap: kunit: Add test for cache sync interaction with ranges
Hector Martin reports that since when doing a cache sync we enable cache bypass if the selector register for a range is cached then we might leave the physical selector register pointing to a different value to that which we have in the cache. If we then try to write to the page that our cache tells us is selected we will not update the selector register and write to the wrong page. Add a test case covering this. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231023-regmap-test-window-cache-v1-2-d8a71f441968@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Mark Brown
|
fabe32cc1e
|
regmap: kunit: Fix marking of the range window as volatile
For some reason the regmap used for testing ranges was not including the end of the range of paged registers as volatile since it found the end by counting from the selector register rather than the base of the window. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231023-regmap-test-window-cache-v1-1-d8a71f441968@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Huang Ying
|
362d37a106 |
mm, pcp: reduce lock contention for draining high-order pages
In commit f26b3fa04611 ("mm/page_alloc: limit number of high-order pages on PCP during bulk free"), the PCP (Per-CPU Pageset) will be drained when PCP is mostly used for high-order pages freeing to improve the cache-hot pages reusing between page allocating and freeing CPUs. On system with small per-CPU data cache slice, pages shouldn't be cached before draining to guarantee cache-hot. But on a system with large per-CPU data cache slice, some pages can be cached before draining to reduce zone lock contention. So, in this patch, instead of draining without any caching, "pcp->batch" pages will be cached in PCP before draining if the size of the per-CPU data cache slice is more than "3 * batch". In theory, if the size of per-CPU data cache slice is more than "2 * batch", we can reuse cache-hot pages between CPUs. But considering the other usage of cache (code, other data accessing, etc.), "3 * batch" is used. Note: "3 * batch" is chosen to make sure the optimization works on recent x86_64 server CPUs. If you want to increase it, please check whether it breaks the optimization. On a 2-socket Intel server with 128 logical CPU, with the patch, the network bandwidth of the UNIX (AF_UNIX) test case of lmbench test suite with 16-pair processes increase 70.5%. The cycles% of the spinlock contention (mostly for zone lock) decreases from 46.1% to 21.3%. The number of PCP draining for high order pages freeing (free_high) decreases 89.9%. The cache miss rate keeps 0.2%. Link: https://lkml.kernel.org/r/20231016053002.756205-4-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Huang Ying
|
94a3bfe407 |
cacheinfo: calculate size of per-CPU data cache slice
This can be used to estimate the size of the data cache slice that can be used by one CPU under ideal circumstances. Both DATA caches and UNIFIED caches are used in calculation. So, the users need to consider the impact of the code cache usage. Because the cache inclusive/non-inclusive information isn't available now, we just use the size of the per-CPU slice of LLC to make the result more predictable across architectures. This may be improved when more cache information is available in the future. A brute-force algorithm to iterate all online CPUs is used to avoid to allocate an extra cpumask, especially in offline callback. Link: https://lkml.kernel.org/r/20231016053002.756205-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Rafael J. Wysocki
|
067e61399d |
OPP updates for 6.7
- Extend support for the opp-level beyond required-opps (Ulf Hansson). - Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru). - dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm Krait SoCs and document named opp-microvolt property (Bjorn Andersson, Dmitry Baryshkov and Christian Marangi). - Fix -Wunsequenced warning (Nathan Chancellor). - General cleanup (Viresh Kumar). -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmU49bgACgkQ0rkcPK6B EhxZNQ/5AeR90rLc56EXijCJO2uBJFWJ86hVy8ILOR1iOkdQoU5lXOToCalDfLOj IzjYUSiyHuuKUi1BUAZDgMqdAWX1T/GVFNA9QMDXAGAH8HjLvC+ar6Z5N2o94bXq Qvjfnb2kYQQR54lM4N7kfW94QH/dPBrheHKGBdO0ytUXPHdakSF0dGdaudugSbaU 7T63vnt1Ow+aAjEDOF2Uv5BeFJ72EEQtvxoPUUBYFTMzzTh0fgLc8jRYwMEHTK2s v1C5A7XrTmnzmyx0XsrpEv6v++MKLe4hHa14YfPJBg1a3UxKZ2P1joK4YFxXTLbe luFYaFvmUJqxNZMBYOIBJZSI+bTaLkqECCmkk+r5DbpyYMFd3ABF8DIBkX5tyvbr x/yf6q63ZKjt9TNNwEYTqNS+B0KsrDuKwDTKvFXE0u8u58/yiEdPMUhloLNjb4Mk X5JeoGnUS/rHKJ7enTV9jdt/D1W5w4Fbj+5KZ943228zNLO3zsVSz6NaBvTCH+a2 4MWdAVXi+GPX4bwVTMZE3YlnRtNU8CqW2OkoN2fAO8w0DPDeO4avjFXWl/zcnOZj 70UX6GSzo4LD8KCMKSrGEK/ShjyRBR7a0OuDy6KShkQxEZoUAJAJia5hPS7oQegb S6vvDQu6drgZX+PwPNJofsMHNldd53eIFfoeP33rRtx9yqHlBQE= =SEJw -----END PGP SIGNATURE----- Merge tag 'opp-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Merge OPP (operating performance points) updates for 6.7 from Viresh Kumar: "- Extend support for the opp-level beyond required-opps (Ulf Hansson). - Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru). - dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm Krait SoCs and document named opp-microvolt property (Bjorn Andersson, Dmitry Baryshkov and Christian Marangi). - Fix -Wunsequenced warning (Nathan Chancellor). - General cleanup (Viresh Kumar)." * tag 'opp-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property OPP: No need to defer probe from _opp_attach_genpd() OPP: Remove genpd_virt_dev_lock OPP: Reorder code in _opp_set_required_opps_genpd() OPP: Add _link_required_opps() to avoid code duplication OPP: Fix formatting of if/else block dt-bindings: opp: opp-v2-kryo-cpu: support Qualcomm Krait SoCs OPP: Fix -Wunsequenced in _of_add_opp_table_v1() dt-bindings: opp: opp-v2-kryo-cpu: Allow opp-peak-kBps OPP: debugfs: Fix warning with W=1 builds OPP: Remove doc style comments for internal routines OPP: Add dev_pm_opp_find_level_floor() OPP: Extend support for the opp-level beyond required-opps OPP: Switch to use dev_pm_domain_set_performance_state() OPP: Extend dev_pm_opp_data with a level OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility PM: domains: Implement the ->set_performance_state() callback for genpd PM: domains: Introduce dev_pm_domain_set_performance_state() |
||
Saravana Kannan
|
2e84dc3792 |
driver core: Release all resources during unbind before updating device links
This commit fixes a bug in commit 9ed9895370ae ("driver core: Functional dependencies tracking support") where the device link status was incorrectly updated in the driver unbind path before all the device's resources were released. Fixes: 9ed9895370ae ("driver core: Functional dependencies tracking support") Cc: stable <stable@kernel.org> Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Closes: https://lore.kernel.org/all/20231014161721.f4iqyroddkcyoefo@pengutronix.de/ Signed-off-by: Saravana Kannan <saravanak@google.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Yang Yingliang <yangyingliang@huawei.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matti Vaittinen <mazziesaccount@gmail.com> Cc: James Clark <james.clark@arm.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231018013851.3303928-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Maurizio Lombardi
|
28f2d57d88 |
driver core: class: remove boilerplate code
Jump to err_out to avoid duplicating the code. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20231020160042.759439-1-mlombard@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Linus Torvalds
|
e1e80380f1 |
regmap: Fix for v6.6
A straightforward fix from Johan for a long standing bug in cases where we both have regmaps without devices and something is using dev_get_regmap(). -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUv6g4ACgkQJNaLcl1U h9BAFAf/Xcx9jWPmYJ4Peon5j25nkzuMn0A4aka2uqfr5juTFZYXi3milp5hTpfD tTC0cgBaADKCTXPU2aDrQeiHd1Rr18sOxAUdQWr7POPsuT+LJFpTjl5agNgPRa9a LqdPA+KfrYV1snIC+sQDhEuHX1UtxDdXCS4Q0KpxIiEZGt3/Z6kDysWEQCPR8m1e uNauKz2GaDB1ejXnEnZFMjkleKbBPc8qMF8A/c2lTayIjDn1xYVbj9IzHKoIP+au S9eMBLrnPNPqhOJxe0pQKIfSz5nbMls/NCZRD/IQN8TTQ/Z6LActfUoKMS09hR6p t8aEB9YCm8Wb+5ad8A0e3molsylvGQ== =RWQo -----END PGP SIGNATURE----- Merge tag 'regmap-fix-v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "A straightforward fix from Johan for a long standing bug in cases where we both have regmaps without devices and something is using dev_get_regmap()" * tag 'regmap-fix-v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: fix NULL deref on lookup |
||
Joel Granados
|
febce0693e |
fw loader: Remove the now superfluous sentinel element from ctl_table array
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) Remove sentinel from firmware_config_table Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
Johan Hovold
|
c6df843348
|
regmap: fix NULL deref on lookup
Not all regmaps have a name so make sure to check for that to avoid dereferencing a NULL pointer when dev_get_regmap() is used to lookup a named regmap. Fixes: e84861fec32d ("regmap: dev_get_regmap_match(): fix string comparison") Cc: stable@vger.kernel.org # 5.8 Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231006082104.16707-1-johan+linaro@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Kees Cook
|
36b2d7dd5a |
driver core: platform: Annotate struct irq_affinity_devres with __counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct irq_affinity_devres. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: linux-hardening@vger.kernel.org Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20231006201749.work.432-kees@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Sudeep Holla
|
0a30c0e9ca |
Merge branch 'opp/pm-domain-scmi' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into for-next/scmi/updates
This is the merge of immutable point in PM OPP tree shared with SCMI so that the SCMI changes based on these OPP changes can be merged via the SCMI tree. * 'opp/pm-domain-scmi' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: OPP: Extend support for the opp-level beyond required-opps OPP: Switch to use dev_pm_domain_set_performance_state() OPP: Extend dev_pm_opp_data with a level OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility PM: domains: Implement the ->set_performance_state() callback for genpd PM: domains: Introduce dev_pm_domain_set_performance_state() |
||
Ulf Hansson
|
401e09201a |
PM: domains: Implement the ->set_performance_state() callback for genpd
To enable generic support for performance scaling for PM domains, let's implement the ->set_performance_state() callback for genpd. Beyond this change, users of the corresponding genpd specific API, dev_pm_genpd_set_performance_state() are encouraged to switch to the common dev_pm_domain_set_performance_state() API. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
Ulf Hansson
|
3fbc5c3b85 |
PM: domains: Introduce dev_pm_domain_set_performance_state()
The generic PM domain is currently the only PM domain variant that supports performance scaling. To allow performance scaling to be supported through a common interface, let's add an optional callback ->set_performance_state(), in the struct dev_pm_domain. Moreover, let's add a function, dev_pm_domain_set_performance_state(), that may be called by consumers to request a new performance state for a device through its PM domain. Note that, in most cases it's preferred that a consumer use the OPP library to request a new performance state for its device. Although, this requires some additional changes to be supported, which are being implemented from subsequent changes. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
Geert Uytterhoeven
|
98ad1dd06a |
drivers: base: test: Make property entry API test modular
There is no reason why the KUnit Tests for the property entry API can only be built-in. Add support for building these tests as a loadable module, like is supported by most other tests. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/98388154383df9d4ced73946efd18318aeea50e2.1695820382.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Andy Shevchenko
|
f1ac370cdd |
driver core: Add missing parameter description to __fwnode_link_add()
The kernel documentation validator is not happy with: drivers/base/core.c:67: warning: Function parameter or member 'flags' not described in '__fwnode_link_add' Add missing parameter description. Fixes: 6a6dfdf8b3ff ("driver core: fw_devlink: Allow marking a fwnode link as being part of a cycle") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230919195048.3197551-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Andy Shevchenko
|
243e1b776f |
driver core: platform: Unify the firmware node type check
OF and ACPI currently are using asymmetrical APIs to check for the firmware node type. Unify them by using is_*_node() against struct fwnode_handle pointer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231003142122.3072824-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Andy Shevchenko
|
6136597c8f |
driver core: platform: Use temporary variable in platform_device_add()
With the temporary variable for the struct device pointer the code looks better and slightly easier to read and parse by human being. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231003142122.3072824-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Andy Shevchenko
|
a549e3aac2 |
driver core: platform: Refactor error path in a couple places
The usual pattern is to bail out on the error case. Besides that one of the labels is redundant as we may return directly. Refactor platform_device_add() and platform_dma_configure() accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231003142122.3072824-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Andy Shevchenko
|
aab8aa0d35 |
driver core: platform: Drop redundant check in platform_device_add()
Starting from the commit 37c12e7497b6 ("[DRIVER MODEL] Improved dynamically allocated platform_device interface") the pdev expects to be allocated beforehand or guaranteed to be non-NULL. Hence the leftover check is now redundant (as we have no combined calls like platform_device_add(platform_device_alloc(...)) in the entire kernel source code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231003142122.3072824-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Linus Torvalds
|
cdcb5d194f |
regmap: Fix for v6.4
A fix for a long standing issue where when we create a new node in an rbtree register cache we were failing to convert the register address of the new register into a bitmask correctly and marking the wrong register as being present in the newly created node. This would only have affected devices with a register stride other than 1 but would corrupt data on those devices. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUcVmcACgkQJNaLcl1U h9A4sgf+K/KziZcfrjzZhsuQ02qfNVDwBrYcsJCW8CjomFq1kb7QMwX1NgDkZRRD +RbBuPvj1t/BMzsePJWrY7wDcOQHPijQPeOufcz6ZxASX0LQN3SCQR2GV+JJJSXb XW0RLws6WcpG15XZvV8ddxYgeIeAKOhrECZg8bcHvsdin5rU19H4FydiLDS7ZCvV jN1XYtwtFosaV/Zi28cE5nOJ3xFZeYzzx6SbdpCiQSY4llqiMxVBfffpS3wDQHWb hLHDHeiD/kNqS+sDVDsHEOgHiWMv1JN8P6pNvPMdNqVDAgq5lVlAB3zex1pFCTV9 FRVBTgKLZEafeMqIpMus6WJe0oKCTQ== =LK1Y -----END PGP SIGNATURE----- Merge tag 'regmap-fix-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "A fix for a long standing issue where when we create a new node in an rbtree register cache we were failing to convert the register address of the new register into a bitmask correctly and marking the wrong register as being present in the newly created node. This would only have affected devices with a register stride other than 1 but would corrupt data on those devices" * tag 'regmap-fix-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: rbtree: Fix wrong register marked as in-cache when creating new node |
||
Richard Fitzgerald
|
7a795ac8d4
|
regmap: rbtree: Fix wrong register marked as in-cache when creating new node
When regcache_rbtree_write() creates a new rbtree_node it was passing the wrong bit number to regcache_rbtree_set_register(). The bit number is the offset __in number of registers__, but in the case of creating a new block regcache_rbtree_write() was not dividing by the address stride to get the number of registers. Fix this by dividing by map->reg_stride. Compare with regcache_rbtree_read() where the bit is checked. This bug meant that the wrong register was marked as present. The register that was written to the cache could not be read from the cache because it was not marked as cached. But a nearby register could be marked as having a cached value even if it was never written to the cache. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 3f4ff561bc88 ("regmap: rbtree: Make cache_present bitmap per node") Link: https://lore.kernel.org/r/20230922153711.28103-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Ulf Hansson
|
3dd91515ef |
PM: domains: Allow genpd providers to manage OPP tables directly by its FW
In some cases the OPP tables aren't specified in device tree, but rather encoded in the FW. To allow a genpd provider to specify them dynamically instead, let's add a new genpd flag, GENPD_FLAG_OPP_TABLE_FW. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20230825112633.236607-13-ulf.hansson@linaro.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
Andy Shevchenko
|
fd6f7ad2fd |
driver core: return an error when dev_set_name() hasn't happened
The commit d21fdd07cea4 ("driver core: Return proper error code when dev_set_name() fails") rewrote the logic of handling the dev_set_name() error codes, but missed the point that initially set error value to -EINVAL might be rewritten and hence the error path can't be triggered at some circumstances. To fix this, make sure that error variable is set to -EINVAL when other conditionals are false. Reported-by: syzbot+bdfb03b1ec8b342c12cb@syzkaller.appspotmail.com Fixes: d21fdd07cea4 ("driver core: Return proper error code when dev_set_name() fails") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230828145824.3895288-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Christophe JAILLET
|
d3601857e1
|
regmap: debugfs: Fix a erroneous check after snprintf()
This error handling looks really strange. Check if the string has been truncated instead. Fixes: f0c2319f9f19 ("regmap: Expose the driver name in debugfs") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/8595de2462c490561f70020a6d11f4d6b652b468.1693857825.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Linus Torvalds
|
28a4f91f5f |
Driver core changes for 6.6-rc1
Here is a small set of driver core updates and additions for 6.6-rc1. Included in here are: - stable kernel documentation updates - class structure const work from Ivan on various subsystems - kernfs tweaks - driver core tests! - kobject sanity cleanups - kobject structure reordering to save space - driver core error code handling fixups - other minor driver core cleanups All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH77Q8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylZMACePk8SitfaJc6FfFf5I7YK7Nq0V8MAn0nUjgsR i8NcNpu/Yv4HGrDgTdh/ =PJbk -----END PGP SIGNATURE----- Merge tag 'driver-core-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is a small set of driver core updates and additions for 6.6-rc1. Included in here are: - stable kernel documentation updates - class structure const work from Ivan on various subsystems - kernfs tweaks - driver core tests! - kobject sanity cleanups - kobject structure reordering to save space - driver core error code handling fixups - other minor driver core cleanups All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits) driver core: Call in reversed order in device_platform_notify_remove() driver core: Return proper error code when dev_set_name() fails kobject: Remove redundant checks for whether ktype is NULL kobject: Add sanity check for kset->kobj.ktype in kset_register() drivers: base: test: Add missing MODULE_* macros to root device tests drivers: base: test: Add missing MODULE_* macros for platform devices tests drivers: base: Free devm resources when unregistering a device drivers: base: Add basic devm tests for platform devices drivers: base: Add basic devm tests for root devices kernfs: fix missing kernfs_iattr_rwsem locking docs: stable-kernel-rules: mention that regressions must be prevented docs: stable-kernel-rules: fine-tune various details docs: stable-kernel-rules: make the examples for option 1 a proper list docs: stable-kernel-rules: move text around to improve flow docs: stable-kernel-rules: improve structure by changing headlines base/node: Remove duplicated include kernfs: attach uuid for every kernfs and report it in fsid kernfs: add stub helper for kernfs_generic_poll() x86/resctrl: make pseudo_lock_class a static const structure x86/MSR: make msr_class a static const structure ... |
||
Linus Torvalds
|
f8fd5c2483 |
This pull request is full of clk driver changes. In fact, there aren't any
changes to the clk framework this time around. That's probably because everyone was on vacation (yours truly included). We did lose a couple clk drivers this time around because nobody was using those devices. That skews the diffstat a bit, but either way, nothing looks out of the ordinary here. The usual suspects are chugging along adding support for more SoCs and fixing bugs. If I had to choose, I'd say the theme for the past few months has been "polish". There's quite a few patches that migrate to devm_platform_ioremap_resource() in here. And there's more than a handful of patches that move the NR_CLKS define from the DT binding header to the driver. There's even patches that migrate drivers to use clk_parent_data and clk_hw to describe clk tree topology. It seems that the spring (summer?) cleaning bug got some folks, or the semiconductor shortage finally hit the software side. New Drivers: - StarFive JH7110 SoC clock drivers - Qualcomm IPQ5018 Global Clock Controller driver - Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK Removed Drivers: - Remove non-OF mmp clk drivers - Remove OXNAS clk driver Updates: - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc - Move defines for numbers of clks (NR_CLKS) from DT headers to drivers - Introduce kstrdup_and_replace() and use it - Add PLL rates for Rockchip rk3568 - Add the display clock tree for Rockchip rv1126 - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs - Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource() - Fix function name in a comment in ccu_mmc_timing.c - Parameter name correction for ccu_nkm_round_rate() - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative parent rates when determining clock rates - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi - Support finding closest (as opposed to closest but not higher) clock rate for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0 - Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to the interconnect drivers - Fix various PM runtime bugs across many Qualcomm clk drivers - Migrate Qualcomm MDM9615 is to parent_hw and parent_data - Add network related resets on Qualcomm IPQ4019 - Add a couple missing USB related clocks to Qualcomm IPQ9574 - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are corrected - Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver - Support retention for the Qualcomm SC8280XP display clock controller GDSCs. - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while sm8450 is corrected to use floor ops - Correct Qualcomm SM6350 GPU clock controller's clock supplies - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC - Change the delay in the Qualcomm reset controller to fsleep() for correctness - Extend the Qualcomm SM83550 Video clock controller to support SC8280XP - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3, M3-W, and M3-N SoCs - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five - Add the PDM IPC clock for i.MX93 - Add 519.75MHz frequency support for i.MX9 PLL - Simplify the .determine_rate() implementation for i.MX GPR mux - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource() - Add the audio mux clock to i.MX8 - Fix the SPLL2 MULT range for PLLv4 - Update the SPLL2 type in i.MX8ULP - Fix the SAI4 clock on i.MX8MP - Add silicon revision print for i.MX25 on clocks init - Drop the return value from __mx25_clocks_init() - Fix the clock pauses on no-op set_rate for i.MX8M composite clock - Drop restrictions for i.MX PLL14xx and fix its max prediv value - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow glitch free switching -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmTv2wkRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSW1LRAAuHR2HoyB4bRHmCa1bfOfYYDfSWsBWEav tWIfBl86Nl/Je50Gk2NJ9vqU5OPqRZ57TIniijHHoX5n7/kYcr8KVmlomY07hUeg CzWyothkxg4k7+rQwVAWvmlR2YAVwzHDKcwq7gkMZOnW/y26LXip99cjopu2CJLx zVwTgvWollmd4KVlicnAlx4zUjgNkWR24iA4Lcf5ir+Dr6FYNjxLI+akBA8EPxxi wLixZbScgBSgpGn6KVgoFhclCToPS0gt5m6HfQxJ/svOCU54l+jRKpzkNZGWvyu4 A8t3CRrwL2iS/mfCGk2yRlaKySoLLpjlpW1AI7fHTWbG2P6p8ZphtN7jOeeAEsbq TNpzWEjtY6B/lfRzxxINXkrtLaqmlnFY/P5np5fDrf/61gRFxLFQemyRdY/xCSJf Kwq8ja1mrSGWoDGG9XhDqTf9Yek9LRObNzlDrEmn/i/qLTcxhOIz58pzHg4iAlx5 9HDtnJ8hKg4uE1TtT12Bmasb1+WzG7GYYESNfKWZhCvbRqEUzcDOHk7xpwYa1ffx yZIgMs7Sb/exNW8LMPYmgnyj/f9eo5IdjiQvune+Zy5NrdzfyN6Sf/LSibrqCF2z X5aFHqQrR8+PifD+se+g5HPa0ezSmBIhXzYUTOC6f+nywlrJjhwDXPDYI6Lcd//p r4mpOmJS+G4= =h2Jz -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk subsystem updates from Stephen Boyd: "This pull request is full of clk driver changes. In fact, there aren't any changes to the clk framework this time around. That's probably because everyone was on vacation (yours truly included). We did lose a couple clk drivers this time around because nobody was using those devices. That skews the diffstat a bit, but either way, nothing looks out of the ordinary here. The usual suspects are chugging along adding support for more SoCs and fixing bugs. If I had to choose, I'd say the theme for the past few months has been "polish". There's quite a few patches that migrate to devm_platform_ioremap_resource() in here. And there's more than a handful of patches that move the NR_CLKS define from the DT binding header to the driver. There's even patches that migrate drivers to use clk_parent_data and clk_hw to describe clk tree topology. It seems that the spring (summer?) cleaning bug got some folks, or the semiconductor shortage finally hit the software side. New Drivers: - StarFive JH7110 SoC clock drivers - Qualcomm IPQ5018 Global Clock Controller driver - Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK Removed Drivers: - Remove non-OF mmp clk drivers - Remove OXNAS clk driver Updates: - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc - Move defines for numbers of clks (NR_CLKS) from DT headers to drivers - Introduce kstrdup_and_replace() and use it - Add PLL rates for Rockchip rk3568 - Add the display clock tree for Rockchip rv1126 - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs - Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource() - Fix function name in a comment in ccu_mmc_timing.c - Parameter name correction for ccu_nkm_round_rate() - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative parent rates when determining clock rates - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi - Support finding closest (as opposed to closest but not higher) clock rate for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0 - Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to the interconnect drivers - Fix various PM runtime bugs across many Qualcomm clk drivers - Migrate Qualcomm MDM9615 is to parent_hw and parent_data - Add network related resets on Qualcomm IPQ4019 - Add a couple missing USB related clocks to Qualcomm IPQ9574 - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are corrected - Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver - Support retention for the Qualcomm SC8280XP display clock controller GDSCs. - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while sm8450 is corrected to use floor ops - Correct Qualcomm SM6350 GPU clock controller's clock supplies - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC - Change the delay in the Qualcomm reset controller to fsleep() for correctness - Extend the Qualcomm SM83550 Video clock controller to support SC8280XP - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3, M3-W, and M3-N SoCs - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five - Add the PDM IPC clock for i.MX93 - Add 519.75MHz frequency support for i.MX9 PLL - Simplify the .determine_rate() implementation for i.MX GPR mux - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource() - Add the audio mux clock to i.MX8 - Fix the SPLL2 MULT range for PLLv4 - Update the SPLL2 type in i.MX8ULP - Fix the SAI4 clock on i.MX8MP - Add silicon revision print for i.MX25 on clocks init - Drop the return value from __mx25_clocks_init() - Fix the clock pauses on no-op set_rate for i.MX8M composite clock - Drop restrictions for i.MX PLL14xx and fix its max prediv value - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow glitch free switching" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits) clk: qcom: Fix SM_GPUCC_8450 dependencies clk: lmk04832: Support using PLL1_LD as SPI readback pin clk: lmk04832: Don't disable vco clock on probe fail clk: lmk04832: Set missing parent_names for output clocks clk: mvebu: Convert to devm_platform_ioremap_resource() clk: nuvoton: Convert to devm_platform_ioremap_resource() clk: socfpga: agilex: Convert to devm_platform_ioremap_resource() clk: ti: Use devm_platform_get_and_ioremap_resource() clk: mediatek: Convert to devm_platform_ioremap_resource() clk: hsdk-pll: Convert to devm_platform_ioremap_resource() clk: gemini: Convert to devm_platform_ioremap_resource() clk: fsl-sai: Convert to devm_platform_ioremap_resource() clk: bm1880: Convert to devm_platform_ioremap_resource() clk: axm5516: Convert to devm_platform_ioremap_resource() clk: actions: Convert to devm_platform_ioremap_resource() clk: cdce925: Remove redundant of_match_ptr() clk: pxa910: Move number of clocks to driver source clk: pxa1928: Move number of clocks to driver source clk: pxa168: Move number of clocks to driver source clk: mmp2: Move number of clocks to driver source ... |
||
Linus Torvalds
|
8f447694c2 |
Devicetree updates for v6.6:
DT core: - Add support for generating DT nodes for PCI devices. This is the groundwork for applying overlays to PCI devices containing non-discoverable downstream devices. - DT unittest additions to check reverted changesets, to test for refcount issues, and to test unresolved symbols. Also, various clean-ups of the unittest along the way. - Refactor node and property manipulation functions to better share code with old API and changeset API - Refactor changeset print functions to a common implementation - Move some platform_device specific functions into of_platform.c Bindings: - Treewide fixing of typos - Treewide clean-up of SPDX tags to use 'OR' consistently - Last chunk of dropping unnecessary quotes. With that, the check for unnecessary quotes is enabled in yamllint. - Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi bindings to DT schema format - Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings - Fixes for Rockchip DWC PCI binding - Ensure all properties are evaluated on USB connector schema - Fix dt-check-compatible script to find of_device_id instances with compiler annotations -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmTubyoACgkQ+vtdtY28 YcPamA//feXFYNPiIbSa7XqfAu1PE5XSg3PqCe77QvLBGJU7saTwRJApc88iTjlA hc5EELnZKp3FE9N7DJdmvEjYxKDqtJOukO+txKy3mFBWo+gZQURthZVcbLxUZmpw XmYA4b/GrIv5h8YWG1wokyaGTtSfTcf0+RmAtVepiDk5kWQKaC04Let356fKn9xi ePgLTZV6BJvPoGpMWd08o+1szUAc6Vihs9qWu7g0+mtb5K5xi/l05YMz3REu7kpf iz06CE/uzYvHpFBJZ6izN+9Qqxh52DnWckXX68v8kStHUON2h1YmZYvjhGrfay4k rHeDnHoRBrepDDCytXQ/fxzGtURr3b8yBnlhzEQadMLXmf25mm+TRBDmf6GnX5ij QmHlj+eSARIafcbb4fqF1Hdyv8c7XM0AkEnj1XrIWLtXPuRNSHlS25dngCztbII/ lqmtBaH1ifCKj2VQ8YL8sVX7k208YU9vDNKZHQyA8dPEYwhknrWmp1F0OAnBB+wz F11kDE7xkZ0/gE7mUHwe9mP94hC6Ceks4IuBvsTzBmSwqXxyCz8gM2KHK4U3gNUr Sk2hWgZn+k2HM9zLb38FE18C6hqws6RBUWnJwZ4V3qPo2eYJ8Jzkvm7oonxjHgCC 4FmYYAoCQhBEkZPOJ4map0eO5VbShn9Hrgs46Jj4WoXmm7dFDLc= =kl+z -----END PGP SIGNATURE----- Merge tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT core: - Add support for generating DT nodes for PCI devices. This is the groundwork for applying overlays to PCI devices containing non-discoverable downstream devices. - DT unittest additions to check reverted changesets, to test for refcount issues, and to test unresolved symbols. Also, various clean-ups of the unittest along the way. - Refactor node and property manipulation functions to better share code with old API and changeset API - Refactor changeset print functions to a common implementation - Move some platform_device specific functions into of_platform.c Bindings: - Treewide fixing of typos - Treewide clean-up of SPDX tags to use 'OR' consistently - Last chunk of dropping unnecessary quotes. With that, the check for unnecessary quotes is enabled in yamllint. - Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi bindings to DT schema format - Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings - Fixes for Rockchip DWC PCI binding - Ensure all properties are evaluated on USB connector schema - Fix dt-check-compatible script to find of_device_id instances with compiler annotations" * tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits) dt-bindings: usb: Add V3s compatible string for OHCI dt-bindings: usb: Add V3s compatible string for EHCI dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B dt-bindings: vendor-prefixes: document Saef Technology dt-bindings: thermal: lmh: update maintainer address of: unittest: Fix of_unittest_pci_node() kconfig dependencies dt-bindings: crypto: ice: Document sm8450 inline crypto engine dt-bindings: ufs: qcom: Add ICE to sm8450 example dt-bindings: ufs: qcom: Add sm6115 binding dt-bindings: ufs: qcom: Add reg-names property for ICE dt-bindings: yamllint: Enable quoted string check dt-bindings: Drop remaining unneeded quotes of: unittest-data: Fix whitespace - angular brackets of: unittest-data: Fix whitespace - indentation of: unittest-data: Fix whitespace - blank lines of: unittest-data: Convert remaining overlay DTS files to sugar syntax of: overlay: unittest: Add test for unresolved symbol of: unittest: Add separators to of_unittest_overlay_high_level() of: unittest: Cleanup partially-applied overlays of: unittest: Merge of_unittest_apply{,_revert}_overlay_check() ... |
||
Linus Torvalds
|
6c1b980a7e |
dma-maping updates for Linux 6.6
- allow dynamic sizing of the swiotlb buffer, to cater for secure virtualization workloads that require all I/O to be bounce buffered (Petr Tesarik) - move a declaration to a header (Arnd Bergmann) - check for memory region overlap in dma-contiguous (Binglei Wang) - remove the somewhat dangerous runtime swiotlb-xen enablement and unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross) - per-node CMA improvements (Yajun Deng) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmTuDHkLHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYOqvhAApMk2/ceTgVH17sXaKE822+xKvgv377O6TlggMeGG W4zA0KD69DNz0AfaaCc5U5f7n8Ld/YY1RsvkHW4b3jgw+KRTeQr0jjitBgP5kP2M A1+qxdyJpCTwiPt9s2+JFVPeyZ0s52V6OJODKRG3s0ore55R+U09VySKtASON+q3 GMKfWqQteKC+thg7NkrQ7JUixuo84oICws+rZn4K9ifsX2O0HYW6aMW0feRfZjJH r0TgqZc4RdPTSaF22oapR9Ls39+7hp/pBvoLm5sBNA3cl5C3X4VWo9ERMU1jW9h+ VYQv39NycUspgskWJmpbU06/+ooYqQlwHSR/vdNusmFIvxo4tf6/UX72YO5F8Dar ap0wYGauiEwTjSnhVxPTXk3obWyWEsgFAeRnPdTlH2CNmv38QZU2HLb8eU1pcXxX j+WI2Ewy9z22uBVYiPOKpdW1jkSfmlmfPp/8SbAdua7I3YQ90rQN6AvU06zAi/cL NQTgO81E4jPkygqAVgS/LeYziWAQ73yM7m9ExThtTgqFtHortwhJ4Fd8XKtvtvEb viXAZ/WZtQBv/CIKAW98NhgIDP/SPOT8ym6V35WK+kkNFMS6LMSQUfl9GgbHGyFa n9icMm7BmbDtT1+AKNafG9En4DtAf9M9QNidAVOyfrsIk6S0gZoZwvIStkA7on8a cNY= =kVVr -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping Pull dma-maping updates from Christoph Hellwig: - allow dynamic sizing of the swiotlb buffer, to cater for secure virtualization workloads that require all I/O to be bounce buffered (Petr Tesarik) - move a declaration to a header (Arnd Bergmann) - check for memory region overlap in dma-contiguous (Binglei Wang) - remove the somewhat dangerous runtime swiotlb-xen enablement and unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross) - per-node CMA improvements (Yajun Deng) * tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: optimize get_max_slots() swiotlb: move slot allocation explanation comment where it belongs swiotlb: search the software IO TLB only if the device makes use of it swiotlb: allocate a new memory pool when existing pools are full swiotlb: determine potential physical address limit swiotlb: if swiotlb is full, fall back to a transient memory pool swiotlb: add a flag whether SWIOTLB is allowed to grow swiotlb: separate memory pool data from other allocator data swiotlb: add documentation and rename swiotlb_do_find_slots() swiotlb: make io_tlb_default_mem local to swiotlb.c swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocated dma-contiguous: check for memory region overlap dma-contiguous: support numa CMA for specified node dma-contiguous: support per-numa CMA for all architectures dma-mapping: move arch_dma_set_mask() declaration to header swiotlb: unexport is_swiotlb_active x86: always initialize xen-swiotlb when xen-pcifront is enabling xen/pci: add flag for PCI passthrough being possible |
||
Linus Torvalds
|
d68b4b6f30 |
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options"). - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a couple of macros to args.h"). - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper commands"). - vsprintf inclusion rationalization from Andy Shevchenko ("lib/vsprintf: Rework header inclusions"). - Switch the handling of kdump from a udev scheme to in-kernel handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory hot un/plug"). - Many singleton patches to various parts of the tree -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy QHy7lL0Syha38kKLMXTM+bN6YQHi9AU= =WJQa -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - An extensive rework of kexec and crash Kconfig from Eric DeVolder ("refactor Kconfig to consolidate KEXEC and CRASH options") - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a couple of macros to args.h") - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper commands") - vsprintf inclusion rationalization from Andy Shevchenko ("lib/vsprintf: Rework header inclusions") - Switch the handling of kdump from a udev scheme to in-kernel handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory hot un/plug") - Many singleton patches to various parts of the tree * tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits) document while_each_thread(), change first_tid() to use for_each_thread() drivers/char/mem.c: shrink character device's devlist[] array x86/crash: optimize CPU changes crash: change crash_prepare_elf64_headers() to for_each_possible_cpu() crash: hotplug support for kexec_load() x86/crash: add x86 crash hotplug support crash: memory and CPU hotplug sysfs attributes kexec: exclude elfcorehdr from the segment digest crash: add generic infrastructure for crash hotplug support crash: move a few code bits to setup support of crash hotplug kstrtox: consistently use _tolower() kill do_each_thread() nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse scripts/bloat-o-meter: count weak symbol sizes treewide: drop CONFIG_EMBEDDED lockdep: fix static memory detection even more lib/vsprintf: declare no_hash_pointers in sprintf.h lib/vsprintf: split out sprintf() and friends kernel/fork: stop playing lockless games for exe_file replacement adfs: delete unused "union adfs_dirtail" definition ... |