Put memcg1-specific members of struct mem_cgroup_per_node under the
CONFIG_MEMCG_V1 config option.
Link: https://lkml.kernel.org/r/20240628210317.272856-8-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Put memcg1-specific members of struct mem_cgroup under the CONFIG_MEMCG_V1
config option. Also group them close to the end of struct mem_cgroup just
before the dynamic per-node part.
Link: https://lkml.kernel.org/r/20240628210317.272856-7-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move out the legacy cgroup v1 socket memory accounting code into
mm/memcontrol-v1.c.
This commit introduces three new functions: memcg1_tcpmem_active(),
memcg1_charge_skmem() and memcg1_uncharge_skmem(), which contain all
cgroup v1-specific code and become trivial if CONFIG_MEMCG_V1 isn't set.
Note, that !!memcg->tcpmem_pressure check in
mem_cgroup_under_socket_pressure() can't be easily moved into
memcontrol-v1.h without including memcontrol-v1.h from memcontrol.h which
isn't a good idea, so it's better to just #ifdef it.
Link: https://lkml.kernel.org/r/20240628210317.272856-3-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Put legacy cgroup v1 memory controller code under a new CONFIG_MEMCG_V1
config option. The option is turned off by default. Nobody except those
who are still using cgroup v1 should turn it on.
If the option is not set, memory controller can still be mounted under
cgroup v1, but none of memcg-specific control files are present.
Please note, that not all cgroup v1's memory controller code is guarded
yet (but most of it), it's a subject for some follow-up work.
Thanks to Michal Hocko for providing a better Kconfig option description.
[roman.gushchin@linux.dev: better config option description provided by Michal]
Link: https://lkml.kernel.org/r/ZnxXNtvqllc9CDoo@google.com
Link: https://lkml.kernel.org/r/20240625005906.106920-14-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Group all cgroup v1-related declarations at the end of memcontrol.h and
mm/memcontrol-v1.h with an intention to put them all together under a
config option later on. It should make things easier to follow and
maintain too.
Link: https://lkml.kernel.org/r/20240625005906.106920-13-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cgroup v1's memory controller contains a pretty complicated event
notifications mechanism which is not used on cgroup v2. Let's move the
corresponding code into memcontrol-v1.c.
Please, note, that mem_cgroup_event_ratelimit() remains in memcontrol.c,
otherwise it would require exporting too many details on memcg stats
outside of memcontrol.c.
Link: https://lkml.kernel.org/r/20240625005906.106920-7-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename exported function related to the softlimit reclaim to have memcg1_
prefix.
Link: https://lkml.kernel.org/r/20240625005906.106920-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kernel test robot reported [1] performance regression for will-it-scale
test suite's page_fault2 test case for the commit 70a64b7919 ("memcg:
dynamically allocate lruvec_stats"). After inspection it seems like the
commit has unintentionally introduced false cache sharing.
After the commit the fields of mem_cgroup_per_node which get read on the
performance critical path share the cacheline with the fields which get
updated often on LRU page allocations or deallocations. This has caused
contention on that cacheline and the workloads which manipulates a lot of
LRU pages are regressed as reported by the test report.
The solution is to rearrange the fields of mem_cgroup_per_node such that
the false sharing is eliminated. Let's move all the read only pointers at
the start of the struct, followed by memcg-v1 only fields and at the end
fields which get updated often.
Experiment setup: Ran fallocate1, fallocate2, page_fault1, page_fault2 and
page_fault3 from the will-it-scale test suite inside a three level memcg
with /tmp mounted as tmpfs on two different machines, one a single numa
node and the other one, two node machine.
$ ./[testcase]_processes -t $NR_CPUS -s 50
Results for single node, 52 CPU machine:
Testcase base with-patch
fallocate1 1031081 1431291 (38.80 %)
fallocate2 1029993 1421421 (38.00 %)
page_fault1 2269440 3405788 (50.07 %)
page_fault2 2375799 3572868 (50.30 %)
page_fault3 28641143 28673950 ( 0.11 %)
Results for dual node, 80 CPU machine:
Testcase base with-patch
fallocate1 2976288 3641185 (22.33 %)
fallocate2 2979366 3638181 (22.11 %)
page_fault1 6221790 7748245 (24.53 %)
page_fault2 6482854 7847698 (21.05 %)
page_fault3 28804324 28991870 ( 0.65 %)
Link: https://lkml.kernel.org/r/20240528164050.2625718-1-shakeel.butt@linux.dev
Fixes: 70a64b7919 ("memcg: dynamically allocate lruvec_stats")
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Feng Tang <feng.tang@intel.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The page_memcg() only called by mod_memcg_page_state(), so squash it to
cleanup page_memcg().
Link: https://lkml.kernel.org/r/20240524014950.187805-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The memcg stats update functions can take arbitrary integer but the only
input which make sense is enum memcg_stat_item and we don't want these
functions to be called with arbitrary integer, so replace the parameter
type with enum memcg_stat_item and compiler will be able to warn if memcg
stat update functions are called with incorrect index value.
Link: https://lkml.kernel.org/r/20240501172617.678560-9-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To decouple the dependency of lruvec_stats on NR_VM_NODE_STAT_ITEMS, we
need to dynamically allocate lruvec_stats in the mem_cgroup_per_node
structure. Also move the definition of lruvec_stats_percpu and
lruvec_stats and related functions to the memcontrol.c to facilitate later
patches. No functional changes in the patch.
Link: https://lkml.kernel.org/r/20240501172617.678560-3-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mod_memcg_lruvec_state() is never called from outside of memcontrol.c and
with always irq disabled. So, replace it with the irq disabled version
and add an assert that irq is disabled in the caller.
Similarly mod_objcg_state() is not called from outside of memcontrol.c, so
simply make it static and change it's name to __mod_objcg_state().
Link: https://lkml.kernel.org/r/20240420232505.2768428-1-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If slabobj_ext vector allocation for a slab object fails and later on it
succeeds for another object in the same slab, the slabobj_ext for the
original object will be NULL and will be flagged in case when
CONFIG_MEM_ALLOC_PROFILING_DEBUG is enabled.
Mark failed slabobj_ext vector allocations using a new objext_flags flag
stored in the lower bits of slab->obj_exts. When new allocation succeeds
it marks all tag references in the same slabobj_ext vector as empty to
avoid warnings implemented by CONFIG_MEM_ALLOC_PROFILING_DEBUG checks.
Link: https://lkml.kernel.org/r/20240321163705.3067592-36-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To store code tag for every slab object, a codetag reference is embedded
into slabobj_ext when CONFIG_MEM_ALLOC_PROFILING=y.
Link: https://lkml.kernel.org/r/20240321163705.3067592-23-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Co-developed-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently slab pages can store only vectors of obj_cgroup pointers in
page->memcg_data. Introduce slabobj_ext structure to allow more data to
be stored for each slab object. Wrap obj_cgroup into slabobj_ext to
support current functionality while allowing to extend slabobj_ext in the
future.
Link: https://lkml.kernel.org/r/20240321163705.3067592-7-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
9 out of 16 callers perform a NULL check before calling obj_cgroup_put().
Move the NULL check in the function, similar to mem_cgroup_put(). The
unlikely() NULL check in current_objcg_update() was left alone to avoid
dropping the unlikey() annotation as this a fast path.
Link: https://lkml.kernel.org/r/20240316015803.2777252-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All users have been converted to mem_cgroup_uncharge_folios() so we can
remove this API.
Link: https://lkml.kernel.org/r/20240227174254.710559-14-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pass a pointer to the lruvec so we can take advantage of the
folio_lruvec_relock_irqsave(). Adjust the calling convention of
folio_lruvec_relock_irqsave() to suit and add a page_cache_release()
wrapper.
Link: https://lkml.kernel.org/r/20240227174254.710559-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Almost identical to mem_cgroup_uncharge_list(), except it takes a
folio_batch instead of a list_head.
Link: https://lkml.kernel.org/r/20240227174254.710559-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It sets memcg information for the pages after the split. A new parameter
new_order is added to tell the order of subpages in the new page, always 0
for now. It prepares for upcoming changes to support split huge page to
any lower order.
Link: https://lkml.kernel.org/r/20240226205534.1603748-6-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We do not have non power of two pages, using nr is error prone if nr is
not power-of-two. Use page order instead.
Link: https://lkml.kernel.org/r/20240226205534.1603748-4-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
"page_counter.h" does not need <linux/kernel.h>. <linux/limits.h> is enough
to get LONG_MAX.
Files that include page_counter.h are limited. They have been compile
tested or checked.
$ git grep page_counter\.h
include/linux/hugetlb_cgroup.h: struct page_counter hugepage[HUGE_MAX_HSTATE];
--> all files that include it have been compile tested
include/linux/memcontrol.h:#include <linux/page_counter.h>
--> <linux/kernel.h> has been added, to be safe
include/net/sock.h:#include <linux/page_counter.h>
--> already include <linux/kernel.h>
mm/hugetlb_cgroup.c:#include <linux/page_counter.h>
mm/memcontrol.c:#include <linux/page_counter.h>
mm/page_counter.c:#include <linux/page_counter.h>
--> compile tested
Link: https://lkml.kernel.org/r/adfdbe21c4d06400d7bd802868762deb85cae8b6.1706908921.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add CONFIG_LRU_GEN_WALKS_MMU such that if disabled, the code that
walks page tables to promote pages into the youngest generation will
not be built.
Also improves code readability by adding two helper functions
get_mm_state() and get_next_mm().
Link: https://lkml.kernel.org/r/20231227141205.2200125-3-kinseyho@google.com
Signed-off-by: Kinsey Ho <kinseyho@google.com>
Co-developed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Donet Tom <donettom@linux.vnet.ibm.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During our experiment with zswap, we sometimes observe swap IOs due to
occasional zswap store failures and writebacks-to-swap. These swapping
IOs prevent many users who cannot tolerate swapping from adopting zswap to
save memory and improve performance where possible.
This patch adds the option to disable this behavior entirely: do not
writeback to backing swapping device when a zswap store attempt fail, and
do not write pages in the zswap pool back to the backing swap device (both
when the pool is full, and when the new zswap shrinker is called).
This new behavior can be opted-in/out on a per-cgroup basis via a new
cgroup file. By default, writebacks to swap device is enabled, which is
the previous behavior. Initially, writeback is enabled for the root
cgroup, and a newly created cgroup will inherit the current setting of its
parent.
Note that this is subtly different from setting memory.swap.max to 0, as
it still allows for pages to be stored in the zswap pool (which itself
consumes swap space in its current form).
This patch should be applied on top of the zswap shrinker series:
https://lore.kernel.org/linux-mm/20231130194023.4102148-1-nphamcs@gmail.com/
as it also disables the zswap shrinker, a major source of zswap
writebacks.
For the most part, this feature is motivated by internal parties who
have already established their opinions regarding swapping - the
workloads that are highly sensitive to IO, and especially those who are
using servers with really slow disk performance (for instance, massive
but slow HDDs). For these folks, it's impossible to convince them to
even entertain zswap if swapping also comes as a packaged deal.
Writeback disabling is quite a useful feature in these situations - on
a mixed workloads deployment, they can disable writeback for the more
IO-sensitive workloads, and enable writeback for other background
workloads.
For instance, on a server with HDD, I allocate memories and populate
them with random values (so that zswap store will always fail), and
specify memory.high low enough to trigger reclaim. The time it takes
to allocate the memories and just read through it a couple of times
(doing silly things like computing the values' average etc.):
zswap.writeback disabled:
real 0m30.537s
user 0m23.687s
sys 0m6.637s
0 pages swapped in
0 pages swapped out
zswap.writeback enabled:
real 0m45.061s
user 0m24.310s
sys 0m8.892s
712686 pages swapped in
461093 pages swapped out
(the last two lines are from vmstat -s).
[nphamcs@gmail.com: add a comment about recurring zswap store failures leading to reclaim inefficiency]
Link: https://lkml.kernel.org/r/20231221005725.3446672-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231207192406.3809579-1-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Heidelberg <david@ixit.cz>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stats flushing for memcg currently follows the following rules:
- Always flush the entire memcg hierarchy (i.e. flush the root).
- Only one flusher is allowed at a time. If someone else tries to flush
concurrently, they skip and return immediately.
- A periodic flusher flushes all the stats every 2 seconds.
The reason this approach is followed is because all flushes are serialized
by a global rstat spinlock. On the memcg side, flushing is invoked from
userspace reads as well as in-kernel flushers (e.g. reclaim, refault,
etc). This approach aims to avoid serializing all flushers on the global
lock, which can cause a significant performance hit under high
concurrency.
This approach has the following problems:
- Occasionally a userspace read of the stats of a non-root cgroup will
be too expensive as it has to flush the entire hierarchy [1].
- Sometimes the stats accuracy are compromised if there is an ongoing
flush, and we skip and return before the subtree of interest is
actually flushed, yielding stale stats (by up to 2s due to periodic
flushing). This is more visible when reading stats from userspace,
but can also affect in-kernel flushers.
The latter problem is particulary a concern when userspace reads stats
after an event occurs, but gets stats from before the event. Examples:
- When memory usage / pressure spikes, a userspace OOM handler may look
at the stats of different memcgs to select a victim based on various
heuristics (e.g. how much private memory will be freed by killing
this). Reading stale stats from before the usage spike in this case
may cause a wrongful OOM kill.
- A proactive reclaimer may read the stats after writing to
memory.reclaim to measure the success of the reclaim operation. Stale
stats from before reclaim may give a false negative.
- Reading the stats of a parent and a child memcg may be inconsistent
(child larger than parent), if the flush doesn't happen when the
parent is read, but happens when the child is read.
As for in-kernel flushers, they will occasionally get stale stats. No
regressions are currently known from this, but if there are regressions,
they would be very difficult to debug and link to the source of the
problem.
This patch aims to fix these problems by restoring subtree flushing, and
removing the unified/coalesced flushing logic that skips flushing if there
is an ongoing flush. This change would introduce a significant regression
with global stats flushing thresholds. With per-memcg stats flushing
thresholds, this seems to perform really well. The thresholds protect the
underlying lock from unnecessary contention.
This patch was tested in two ways to ensure the latency of flushing is
up to par, on a machine with 384 cpus:
- A synthetic test with 5000 concurrent workers in 500 cgroups doing
allocations and reclaim, as well as 1000 readers for memory.stat
(variation of [2]). No regressions were noticed in the total runtime.
Note that significant regressions in this test are observed with
global stats thresholds, but not with per-memcg thresholds.
- A synthetic stress test for concurrently reading memcg stats while
memory allocation/freeing workers are running in the background,
provided by Wei Xu [3]. With 250k threads reading the stats every
100ms in 50k cgroups, 99.9% of reads take <= 50us. Less than 0.01%
of reads take more than 1ms, and no reads take more than 100ms.
[1] https://lore.kernel.org/lkml/CABWYdi0c6__rh-K7dcM_pkf9BJdTRtAU08M43KO9ME4-dsgfoQ@mail.gmail.com/
[2] https://lore.kernel.org/lkml/CAJD7tka13M-zVZTyQJYL1iUAYvuQ1fcHbCjcOBZcz6POYTV-4g@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CAAPL-u9D2b=iF5Lf_cRnKxUfkiEe0AMDTu6yhrUAzX0b6a6rDg@mail.gmail.com/
[akpm@linux-foundation.org: fix mm/zswap.c]
[yosryahmed@google.com: remove stats flushing mutex]
Link: https://lkml.kernel.org/r/CAJD7tkZgP3m-VVPn+fF_YuvXeQYK=tZZjJHj=dzD=CcSSpp2qg@mail.gmail.com
Link: https://lkml.kernel.org/r/20231129032154.3710765-6-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Tested-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Wei Xu <weixugc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, we only have a single global LRU for zswap. This makes it
impossible to perform worload-specific shrinking - an memcg cannot
determine which pages in the pool it owns, and often ends up writing pages
from other memcgs. This issue has been previously observed in practice
and mitigated by simply disabling memcg-initiated shrinking:
https://lore.kernel.org/all/20230530232435.3097106-1-nphamcs@gmail.com/T/#u
This patch fully resolves the issue by replacing the global zswap LRU
with memcg- and NUMA-specific LRUs, and modify the reclaim logic:
a) When a store attempt hits an memcg limit, it now triggers a
synchronous reclaim attempt that, if successful, allows the new
hotter page to be accepted by zswap.
b) If the store attempt instead hits the global zswap limit, it will
trigger an asynchronous reclaim attempt, in which an memcg is
selected for reclaim in a round-robin-like fashion.
[nphamcs@gmail.com: use correct function for the onlineness check, use mem_cgroup_iter_break()]
Link: https://lkml.kernel.org/r/20231205195419.2563217-1-nphamcs@gmail.com
[nphamcs@gmail.com: drop the pool's reference at the end of the writeback step]
Link: https://lkml.kernel.org/r/20231206030627.4155634-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231130194023.4102148-4-nphamcs@gmail.com
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Co-developed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch implements a helper function that try to get a reference to an
memcg's css, as well as checking if it is online. This new function is
almost exactly the same as the existing mem_cgroup_tryget(), except for
the onlineness check. In the !CONFIG_MEMCG case, it always returns true,
analogous to mem_cgroup_tryget(). This is useful for e.g to the new zswap
writeback scheme, where we need to select the next online memcg as a
candidate for the global limit reclaim.
Link: https://lkml.kernel.org/r/20231130194023.4102148-3-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Also remove count_memcg_page_event now that its last caller no longer uses
it and reword hpage_collapse_alloc_page() to hpage_collapse_alloc_folio().
This removes 1 call to compound_head() and helps convert khugepaged to
use folios throughout.
Link: https://lkml.kernel.org/r/20231020183331.10770-5-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reimplement get_obj_cgroup_from_current() using current_obj_cgroup().
get_obj_cgroup_from_current() and current_obj_cgroup() share 80% of the
code, so the new implementation is almost trivial.
get_obj_cgroup_from_current() is a convenient function used by the
bpf subsystem, so there is no reason to get rid of it completely.
Link: https://lkml.kernel.org/r/20231019225346.1822282-7-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Switch to a scope-based protection of the objcg pointer on slab/kmem
allocation paths. Instead of using the get_() semantics in the
pre-allocation hook and put the reference afterwards, let's rely on the
fact that objcg is pinned by the scope.
It's possible because:
1) if the objcg is received from the current task struct, the task is
keeping a reference to the objcg.
2) if the objcg is received from an active memcg (remote charging),
the memcg is pinned by the scope and has a reference to the
corresponding objcg.
Link: https://lkml.kernel.org/r/20231019225346.1822282-5-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Keep a reference to the original objcg object for the entire life of a
memcg structure.
This allows to simplify the synchronization on the kernel memory
allocation paths: pinning a (live) memcg will also pin the corresponding
objcg.
The memory overhead of this change is minimal because object cgroups
usually outlive their corresponding memory cgroups even without this
change, so it's only an additional pointer per memcg.
Link: https://lkml.kernel.org/r/20231019225346.1822282-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For most migration use cases, only transfer the memcg data from the old
folio to the new folio, and clear the old folio's memcg data. No charging
and uncharging will be done.
This shaves off some work on the migration path, and avoids the temporary
double charging of a folio during its migration.
The only exception is replace_page_cache_folio(), which will use the old
mem_cgroup_migrate() (now renamed to mem_cgroup_replace_folio). In that
context, the isolation of the old page isn't quite as thorough as with
migration, so we cannot use our new implementation directly.
This patch is the result of the following discussion on the new hugetlb
memcg accounting behavior:
https://lore.kernel.org/lkml/20231003171329.GB314430@monkey/
Link: https://lkml.kernel.org/r/20231006184629.155543-3-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "hugetlb memcg accounting", v4.
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etcetera fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch series rectifies this issue by charging the memcg when the
hugetlb folio is allocated, and uncharging when the folio is freed. In
addition, a new selftest is added to demonstrate and verify this new
behavior.
This patch (of 4):
This patch exposes charge committing and cancelling as parts of the memory
controller interface. These functionalities are useful when the
try_charge() and commit_charge() stages have to be separated by other
actions in between (which can fail). One such example is the new hugetlb
accounting behavior in the following patch.
The patch also adds a helper function to obtain a reference to the
current task's memcg.
Link: https://lkml.kernel.org/r/20231006184629.155543-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231006184629.155543-2-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct
mem_cgroup_threshold_ary.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Link: https://lkml.kernel.org/r/20230922175327.work.985-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
Currently, memcg uses rstat to maintain aggregated hierarchical stats.
Counters are maintained for hierarchical stats at each memcg. Rstat
tracks which cgroups have updates on which cpus to keep those counters
fresh on the read-side.
Non-hierarchical stats are currently not covered by rstat. Their per-cpu
counters are summed up on every read, which is expensive. The original
implementation did the same. At some point before rstat, non-hierarchical
aggregated counters were introduced by commit a983b5ebee ("mm:
memcontrol: fix excessive complexity in memory.stat reporting"). However,
those counters were updated on the performance critical write-side, which
caused regressions, so they were later removed by commit 815744d751
("mm: memcontrol: don't batch updates of local VM stats and events"). See
[1] for more detailed history.
Kernel versions in between a983b5ebee & 815744d751 (a year and a half)
enjoyed cheap reads of non-hierarchical stats, specifically on cgroup v1.
When moving to more recent kernels, a performance regression for reading
non-hierarchical stats is observed.
Now that we have rstat, we know exactly which percpu counters have updates
for each stat. We can maintain non-hierarchical counters again, making
reads much more efficient, without affecting the performance critical
write-side. Hence, add non-hierarchical (i.e local) counters for the
stats, and extend rstat flushing to keep those up-to-date.
A caveat is that we now need a stats flush before reading
local/non-hierarchical stats through {memcg/lruvec}_page_state_local() or
memcg_events_local(), where we previously only needed a flush to read
hierarchical stats. Most contexts reading non-hierarchical stats are
already doing a flush, add a flush to the only missing context in
count_shadow_nodes().
With this patch, reading memory.stat from 1000 memcgs is 3x faster on a
machine with 256 cpus on cgroup v1:
# for i in $(seq 1000); do mkdir /sys/fs/cgroup/memory/cg$i; done
# time cat /sys/fs/cgroup/memory/cg*/memory.stat > /dev/null
real 0m0.125s
user 0m0.005s
sys 0m0.120s
After:
real 0m0.032s
user 0m0.005s
sys 0m0.027s
To make sure there are no regressions on cgroup v2, I ran an artificial
reclaim/refault stress test [2] that creates (NR_CPUS * 2) cgroups,
assigns them limits, runs a worker process in each cgroup that allocates
tmpfs memory equal to quadruple the limit (to invoke reclaim
continuously), and then reads back the entire file (to invoke refaults).
All workers are run in parallel, and zram is used as a swapping backend.
Both reclaim and refault have conditional stats flushing. I ran this on a
machine with 112 cpus, once on mm-unstable, and once on mm-unstable with
this patch reverted.
(1) A few runs without this patch:
# time ./stress_reclaim_refault.sh
real 0m9.949s
user 0m0.496s
sys 14m44.974s
# time ./stress_reclaim_refault.sh
real 0m10.049s
user 0m0.486s
sys 14m55.791s
# time ./stress_reclaim_refault.sh
real 0m9.984s
user 0m0.481s
sys 14m53.841s
(2) A few runs with this patch:
# time ./stress_reclaim_refault.sh
real 0m9.885s
user 0m0.486s
sys 14m48.753s
# time ./stress_reclaim_refault.sh
real 0m9.903s
user 0m0.495s
sys 14m48.339s
# time ./stress_reclaim_refault.sh
real 0m9.861s
user 0m0.507s
sys 14m49.317s
No regressions are observed with this patch. There is actually a very
slight improvement. If I have to guess, maybe it's because we avoid
the percpu loop in count_shadow_nodes() when calling
lruvec_page_state_local(), but I could not prove this using perf, it's
probably in the noise.
[1] https://lore.kernel.org/lkml/20230725201811.GA1231514@cmpxchg.org/
[2] https://lore.kernel.org/lkml/CAJD7tkb17x=qwoO37uxyYXLEUVp15BQKR+Xfh7Sg9Hx-wTQ_=w@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230803185046.1385770-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20230726153223.821757-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit bef8620cd8 ("mm: memcg: deprecate the non-hierarchical
mode"), use_hierarchy is already deprecated. And it's further removed via
commit 9d9d341df4 ("cgroup: remove obsoleted broken_hierarchy and
warned_broken_hierarchy"). Update corresponding comment.
Link: https://lkml.kernel.org/r/20230801124359.2266860-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 45c7f7e1ef ("mm, memcg: decouple e{low,min} state mutations from
protection checks") changed the function name but not the corresponding
comment.
Link: https://lkml.kernel.org/r/20230727115934.657787-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As the one caller now has a folio, pass it in and use it. Removes three
calls to compound_head().
Link: https://lkml.kernel.org/r/20230715042343.434588-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
MEM_CGROUP_ID_MAX is only used when CONFIG_MEMCG is configured. So remove
unneeded !CONFIG_MEMCG variant. Also it's only used in
mem_cgroup_alloc(), so move it from memcontrol.h to memcontrol.c. And
further define it as:
#define MEM_CGROUP_ID_MAX ((1UL << MEM_CGROUP_ID_SHIFT) - 1)
so if someone changes MEM_CGROUP_ID_SHIFT in the future, then
MEM_CGROUP_ID_MAX will be updated accordingly, as suggested by Muchun.
Link: https://lkml.kernel.org/r/20230708023304.1184111-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now there are two indicators of socket memory pressure sit inside
struct mem_cgroup, socket_pressure and tcpmem_pressure, indicating
memory reclaim pressure in memcg->memory and ->tcpmem respectively.
When in legacy mode (cgroupv1), the socket memory is charged into
->tcpmem which is independent of ->memory, so socket_pressure has
nothing to do with socket's pressure at all. Things could be worse
by taking socket_pressure into consideration in legacy mode, as a
pressure in ->memory can lead to premature reclamation/throttling
in socket.
While for the default mode (cgroupv2), the socket memory is charged
into ->memory, and ->tcpmem/->tcpmem_pressure are simply not used.
So {socket,tcpmem}_pressure are only used in default/legacy mode
respectively for indicating socket memory pressure. This patch fixes
the pieces of code that make mixed use of both.
Fixes: 8e8ae64524 ("mm: memcontrol: hook up vmpressure to socket pressure")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No user checks the return value of mem_cgroup_scan_tasks(). Make the
return value void.
Link: https://lkml.kernel.org/r/20230616063030.977586-1-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit c7c3dec1c9 ("mm: rmap: remove lock_page_memcg()"),
no more user, kill lock_page_memcg() and unlock_page_memcg().
Link: https://lkml.kernel.org/r/20230614143612.62575-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previous patches removed all callers of mem_cgroup_flush_stats_atomic().
Remove the function and simplify the code.
Link: https://lkml.kernel.org/r/20230421174020.2994750-5-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In workingset_refault(), we call
mem_cgroup_flush_stats_atomic_ratelimited() to read accurate stats within
an RCU read section and with sleeping disallowed. Move the call above the
RCU read section to make it non-atomic.
Flushing is an expensive operation that scales with the number of cpus and
the number of cgroups in the system, so avoid doing it atomically where
possible.
Since workingset_refault() is the only caller of
mem_cgroup_flush_stats_atomic_ratelimited(), just make it non-atomic, and
rename it to mem_cgroup_flush_stats_ratelimited().
Link: https://lkml.kernel.org/r/20230330191801.1967435-7-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, all contexts that flush memcg stats do so with sleeping not
allowed. Some of these contexts are perfectly safe to sleep in, such as
reading cgroup files from userspace or the background periodic flusher.
Flushing is an expensive operation that scales with the number of cpus and
the number of cgroups in the system, so avoid doing it atomically where
possible.
Refactor the code to make mem_cgroup_flush_stats() non-atomic (aka
sleepable), and provide a separate atomic version. The atomic version is
used in reclaim, refault, writeback, and in mem_cgroup_usage(). All other
code paths are left to use the non-atomic version. This includes
callbacks for userspace reads and the periodic flusher.
Since refault is the only caller of mem_cgroup_flush_stats_ratelimited(),
change it to mem_cgroup_flush_stats_atomic_ratelimited(). Reclaim and
refault code paths are modified to do non-atomic flushing in separate
later patches -- so it will eventually be changed back to
mem_cgroup_flush_stats_ratelimited().
Link: https://lkml.kernel.org/r/20230330191801.1967435-6-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
