- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the signal
of the timer is ignored so that the timer signal can be delivered once
the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small intervals
and keeps the system pointlessly out of low power states for no value.
This is a long standing non-trivial problem due to the lock order of
posix-timer lock and the sighand lock along with life time issues as
the timer and the sigqueue have different life time rules.
Cure this by:
* Embedding the sigqueue into the timer struct to have the same life
time rules. Aside of that this also avoids the lookup of the timer
in the signal delivery and rearm path as it's just a always valid
container_of() now.
* Queuing ignored timer signals onto a seperate ignored list.
* Moving queued timer signals onto the ignored list when the signal is
switched to SIG_IGN before it could be delivered.
* Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal delivery
code to rearm the timer.
This also required to consolidate the signal delivery rules so they are
consistent across all situations. With that all self test scenarios
finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time stamps
by default and switch to fine grained time stamps when inode attributes
are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that the
VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
* Move all sleep and timeout functions into one file
* Rework udelay() and ndelay() into proper documented inline functions
and replace the hardcoded magic numbers by proper defines.
* Rework the fsleep() implementation to take the reality of the timer
wheel granularity on different HZ values into account. Right now the
boundaries are hard coded time ranges which fail to provide the
requested accuracy on different HZ settings.
* Update documentation for all sleep/timeout related functions and fix
up stale documentation links all over the place
* Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as that's
the clock which drives the timekeeping adjustments via the various user
space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file descriptor
based posix clocks, but their usability is very limited. They can't be
accessed fast as they always go all the way out to the hardware and
they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the kernel
provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework converts
timekeeping and adjtimex(2) into generic functionality which operates
on pointers to data structures instead of using static variables.
This allows to provide time accessors and adjtimex(2) functionality for
the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less straight
forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the core
code and a few usage sites of the less frequently used interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is already
prepared and scheduled for the next merge window.
- Drivers:
* Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with other
clusters.
* Mostly boring cleanups, fixes, improvements and code movement
-----BEGIN PGP SIGNATURE-----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=2VC6
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
damon_feed_loop_next_input() is inefficient and fragile to overflows.
Specifically, 'score_goal_diff_bp' calculation can overflow when 'score'
is high. The calculation is actually unnecessary at all because 'goal' is
a constant of value 10,000. Calculation of 'compensation' is again
fragile to overflow. Final calculation of return value for under-achiving
case is again fragile to overflow when the current score is
under-achieving the target.
Add two corner cases handling at the beginning of the function to make the
body easier to read, and rewrite the body of the function to avoid
overflows and the unnecessary bp value calcuation.
Link: https://lkml.kernel.org/r/20241031161203.47751-1-sj@kernel.org
Fixes: 9294a037c0 ("mm/damon/core: implement goal-oriented feedback-driven quota auto-tuning")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/944f3d5b-9177-48e7-8ec9-7f1331a3fea3@roeck-us.net
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: <stable@vger.kernel.org> [6.8.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON's logics to determine if this is the time to apply damos schemes
assumes next_apply_sis is always set larger than current
passed_sample_intervals. And therefore assume continuously incrementing
passed_sample_intervals will make it reaches to the next_apply_sis in
future. The logic hence does apply the scheme and update next_apply_sis
only if passed_sample_intervals is same to next_apply_sis.
If Schemes apply interval is set as zero, however, next_apply_sis is set
same to current passed_sample_intervals, respectively. And
passed_sample_intervals is incremented before doing the next_apply_sis
check. Hence, next_apply_sis becomes larger than next_apply_sis, and the
logic says it is not the time to apply schemes and update next_apply_sis.
In other words, DAMON stops applying schemes until passed_sample_intervals
overflows.
Based on the documents and the common sense, a reasonable behavior for
such inputs would be applying the schemes for every sampling interval.
Handle the case by removing the assumption.
Link: https://lkml.kernel.org/r/20241031183757.49610-3-sj@kernel.org
Fixes: 42f994b714 ("mm/damon/core: implement scheme-specific apply interval")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.7.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/core: fix handling of zero non-sampling intervals".
DAMON's internal intervals accounting logic is not correctly handling
non-sampling intervals of zero values for a wrong assumption. This could
cause unexpected monitoring behavior, and even result in infinite hang of
DAMON sysfs interface user threads in case of zero aggregation interval.
Fix those by updating the intervals accounting logic. For details of the
root case and solutions, please refer to commit messages of fixes.
This patch (of 2):
DAMON's logics to determine if this is the time to do aggregation and ops
update assumes next_{aggregation,ops_update}_sis are always set larger
than current passed_sample_intervals. And therefore it further assumes
continuously incrementing passed_sample_intervals every sampling interval
will make it reaches to the next_{aggregation,ops_update}_sis in future.
The logic therefore make the action and update
next_{aggregation,ops_updaste}_sis only if passed_sample_intervals is same
to the counts, respectively.
If Aggregation interval or Ops update interval are zero, however,
next_aggregation_sis or next_ops_update_sis are set same to current
passed_sample_intervals, respectively. And passed_sample_intervals is
incremented before doing the next_{aggregation,ops_update}_sis check.
Hence, passed_sample_intervals becomes larger than
next_{aggregation,ops_update}_sis, and the logic says it is not the time
to do the action and update next_{aggregation,ops_update}_sis forever,
until an overflow happens. In other words, DAMON stops doing aggregations
or ops updates effectively forever, and users cannot get monitoring
results.
Based on the documents and the common sense, a reasonable behavior for
such inputs is doing an aggregation and an ops update for every sampling
interval. Handle the case by removing the assumption.
Note that this could incur particular real issue for DAMON sysfs interface
users, in case of zero Aggregation interval. When user starts DAMON with
zero Aggregation interval and asks online DAMON parameter tuning via DAMON
sysfs interface, the request is handled by the aggregation callback.
Until the callback finishes the work, the user who requested the online
tuning just waits. Hence, the user will be stuck until the
passed_sample_intervals overflows.
Link: https://lkml.kernel.org/r/20241031183757.49610-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20241031183757.49610-2-sj@kernel.org
Fixes: 4472edf63d ("mm/damon/core: use number of passed access sampling as a timer")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.7.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The upper bound for usleep_range_idle() was taken from the outdated
documentation. As a recommondation for the upper bound of usleep_range()
depends on HZ configuration it is not possible to hard code it.
Use the define "USLEEP_RANGE_UPPER_BOUND" instead.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-8-dc8b907cb62f@linutronix.de
usleep_idle_range() is a variant of usleep_range(). Both are using
usleep_range_state() as a base. To be able to find all the related
functions in one go, rename it usleep_idle_range() to usleep_range_idle().
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-4-dc8b907cb62f@linutronix.de
The old URL doesn't really work anymore and as the documentation has been
integrated in the main kernel documentation site, change the URL to point
to that.
Link: https://lkml.kernel.org/r/20240924082331.11499-1-didi.debian@cknow.org
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
this pull request are:
"Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
"Some cleanups for shmem" from Baolin Wang. No functional changes - mode
code reuse, better function naming, logic simplifications.
"mm: some small page fault cleanups" from Josef Bacik. No functional
changes - code cleanups only.
"Various memory tiering fixes" from Zi Yan. A small fix and a little
cleanup.
"mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
"Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This
is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at all
used 16k. Useful for some system tuning things, but partivularly useful
for "the dynamic kernel stack project".
"kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov.
Teaches kmemleak to detect leaksage of percpu memory.
"mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
"mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David
Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work
correctly by design rather than by accident.
"mm: remove arch_make_page_accessible()" from David Hildenbrand. Some
folio conversions which make arch_make_page_accessible() unneeded.
"mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel.
Cleans up and fixes our handling of the resetting of the cgroup/process
peak-memory-use detector.
"Make core VMA operations internal and testable" from Lorenzo Stoakes.
Rationalizaion and encapsulation of the VMA manipulation APIs. With a
view to better enable testing of the VMA functions, even from a
userspace-only harness.
"mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in
the zswap global shrinker, resulting in improved performance.
"mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in
some missing info in /proc/zoneinfo.
"mm: replace follow_page() by folio_walk" from David Hildenbrand. Code
cleanups and rationalizations (conversion to folio_walk()) resulting in
the removal of follow_page().
"improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some
tuning to improve zswap's dynamic shrinker. Significant reductions in
swapin and improvements in performance are shown.
"mm: Fix several issues with unaccepted memory" from Kirill Shutemov.
Improvements to the new unaccepted memory feature,
"mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX
PUDs. This was missing, although nobody seems to have notied yet.
"Introduce a store type enum for the Maple tree" from Sidhartha Kumar.
Cleanups and modest performance improvements for the maple tree library
code.
"memcg: further decouple v1 code from v2" from Shakeel Butt. Move more
cgroup v1 remnants away from the v2 memcg code.
"memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds
various warnings telling users that memcg v1 features are deprecated.
"mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li.
Greatly improves the success rate of the mTHP swap allocation.
"mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate
per-arch implementations of numa_memblk code into generic code.
"mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
"support large folio swap-out and swap-in for shmem" from Baolin Wang.
With this series we no longer split shmem large folios into simgle-page
folios when swapping out shmem.
"mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance
improvements and code reductions for gigantic folios.
"support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
"mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
"Increase the number of bits available in page_type" from Matthew Wilcox.
Increases the number of bits available in page_type!
"Simplify the page flags a little" from Matthew Wilcox. Many legacy page
flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
"mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An
optimization which permits us to avoid writing/reading zero-filled zswap
pages to backing store.
"Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window
which occurs when a MAP_FIXED operqtion is occurring during an unrelated
vma tree walk.
"mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the
vma_merge() functionality, making ot cleaner, more testable and better
tested.
"misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor
fixups of DAMON selftests and kunit tests.
"mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code
cleanups and folio conversions.
"Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups
for shmem controls and stats.
"mm: count the number of anonymous THPs per size" from Barry Song. Expose
additional anon THP stats to userspace for improved tuning.
"mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio
conversions and removal of now-unused page-based APIs.
"replace per-quota region priorities histogram buffer with per-context
one" from SeongJae Park. DAMON histogram rationalization.
"Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae
Park. DAMON documentation updates.
"mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve
related doc and warn" from Jason Wang: fixes usage of page allocator
__GFP_NOFAIL and GFP_ATOMIC flags.
"mm: split underused THPs" from Yu Zhao. Improve THP=always policy - this
was overprovisioning THPs in sparsely accessed memory areas.
"zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add
support for zram run-time compression algorithm tuning.
"mm: Care about shadow stack guard gap when getting an unmapped area" from
Mark Brown. Fix up the various arch_get_unmapped_area() implementations
to better respect guard areas.
"Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of
mem_cgroup_iter() and various code cleanups.
"mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
"resource: Fix region_intersects() vs add_memory_driver_managed()" from
Huang Ying. Fix a bug in region_intersects() for systems with CXL memory.
"mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a
couple more code paths to correctly recover from the encountering of
poisoned memry.
"mm: enable large folios swap-in support" from Barry Song. Support the
swapin of mTHP memory into appropriately-sized folios, rather than into
single-page folios.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu1BBwAKCRDdBJ7gKXxA
jlWNAQDYlqQLun7bgsAN4sSvi27VUuWv1q70jlMXTfmjJAvQqwD/fBFVR6IOOiw7
AkDbKWP2k0hWPiNJBGwoqxdHHx09Xgo=
=s0T+
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
The aggregation interval of test purpose damon_attrs for
damon_test_nr_accesses_to_accesses_bp() becomes zero on 32 bit
architecture, since size of int and long types are same. As a result,
damon_nr_accesses_to_accesses_bp() call with the test data triggers
divide-by-zero exception. damon_nr_accesses_to_accesses_bp() shouldn't
be called with such data, and the non-test code avoids that by checking
the case on damon_update_monitoring_results(). Skip the test code in
the case, and add an explicit caution of the case on the comment for the
test target function.
Link: https://lkml.kernel.org/r/20240905162423.74053-1-sj@kernel.org
Fixes: 5e06ad5900 ("mm/damon/core-test: test max_nr_accesses overflow caused divide-by-zero")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/c771b962-a58f-435b-89e4-1211a9323181@roeck-us.net
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_test_three_regions_in_vmas() initializes a maple tree with
MM_MT_FLAGS. The flags contains MT_FLAGS_LOCK_EXTERN, which means mt_lock
of the maple tree will not be used. And therefore the maple tree
initialization code skips initialization of the mt_lock. However,
__link_vmas(), which adds vmas for test to the maple tree, uses the
mt_lock. In other words, the uninitialized spinlock is used. The problem
becomes clear when spinlock debugging is turned on, since it reports
spinlock bad magic bug.
Fix the issue by excluding MT_FLAGS_LOCK_EXTERN from the maple tree
initialization flags. Note that we don't use empty flags to make it
further similar to the usage of mm maple tree, and to be prepared for
possible future changes, as suggested by Liam.
Link: https://lkml.kernel.org/r/20240904172931.1284-1-sj@kernel.org
Fixes: d0cf3dd47f ("damon: convert __damon_va_three_regions to use the VMA iterator")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/1453b2b2-6119-4082-ad9e-f3c5239bf87e@roeck-us.net
Suggested-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This reverts commit 0742cadf5e ("mm/damon/lru_sort: adjust local
variable to dynamic allocation").
The commit was introduced to avoid unnecessary usage of stack memory for
per-scheme region priorities histogram buffer. The fix is nice, but the
point of the fix looks not very clear if the commit message is not read
together. That's mainly because the buffer is a private field, which
means it is hidden from the DAMON API users. That's not the fault of the
fix but the underlying data structure.
Now the per-scheme histogram buffer is gone, so the problem that the
commit was fixing is also removed. The use of kmemdup() has no more point
but just making the code bit difficult to understand. Revert the fix.
Link: https://lkml.kernel.org/r/20240826042323.87025-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace the usage of per-quota region priorities histogram buffer with the
per-context one. After this change, the per-quota histogram is not used
by anyone, and hence it is ready to be removed.
Link: https://lkml.kernel.org/r/20240826042323.87025-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "replace per-quota region priorities histogram buffer with
per-context one".
Each DAMOS quota (struct damos_quota) maintains a histogram for total
regions size per its prioritization score. DAMOS calcultes minimum
prioritization score of regions that are ok to apply the DAMOS action to
while respecting the quota. The histogram is constructed only for the
calculation of the minimum score in damos_adjust_quota() for each quota
which called by kdamond_fn().
Hence, there is no real reason to have per-quota histogram. Only
per-kdamond histogram is needed, since parallel kdamonds could have races
otherwise. The current implementation is only wasting the memory, and can
easily cause unintended stack usage[1].
So, introducing a per-kdamond histogram and replacing the per-quota one
with it would be the right solution for the issue. However, supporting
multiple DAMON contexts per kdamond is still an ongoing work[2] without a
clear estimated time of arrival. Meanwhile, per-context histogram could
be an effective and straightforward solution having no blocker. Let's fix
the problem first in the way.
This patch (of 4):
Introduce per-context buffer for region priority scores-total size
histogram. Same to the per-quota one (->histogram of struct damos_quota),
the new buffer is hidden from DAMON API users by being defined as a
private field of DAMON context structure. It is dynamically allocated and
de-allocated at the beginning and ending of the execution of the kdamond
by kdamond_fn() itself.
[1] commit 0742cadf5e ("mm/damon/lru_sort: adjust local variable to dynamic allocation")
[2] https://lore.kernel.org/20240531122320.909060-1-yorha.op@gmail.com
Link: https://lkml.kernel.org/r/20240826042323.87025-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240826042323.87025-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Traversing VMAs of a given maple tree should be protected by rcu read
lock. However, __damon_va_three_regions() is not doing the protection.
Hold the lock.
Link: https://lkml.kernel.org/r/20240905001204.1481-1-sj@kernel.org
Fixes: d0cf3dd47f ("damon: convert __damon_va_three_regions to use the VMA iterator")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/b83651a0-5b24-4206-b860-cb54ffdf209b@roeck-us.net
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'--kunitconfig' option of 'kunit.py run' supports '.kunitconfig' file name
convention. Add the file for DAMON kunit tests for more convenient kunit
run.
Link: https://lkml.kernel.org/r/20240827030336.7930-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test depends on registration of DAMON_OPS_PADDR. It would be
registered only when CONFIG_DAMON_PADDR is set. DAMON core kunit tests do
fake ops registration for such case. However, the functions for such fake
ops registration is not available to DAMON debugfs interface. Just skip
the test in the case.
Link: https://lkml.kernel.org/r/20240827030336.7930-8-sj@kernel.org
Fixes: 999b946797 ("mm/damon/dbgfs-test: fix is_target_id() change")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test depends on registration of DAMON_OPS_PADDR. It would be
registered only when CONFIG_DAMON_PADDR is set. DAMON core kunit tests do
fake ops registration for such case. However, the functions for such fake
ops registration is not available to DAMON debugfs interface. Just skip
the test in the case.
Link: https://lkml.kernel.org/r/20240827030336.7930-7-sj@kernel.org
Fixes: 999b946797 ("mm/damon/dbgfs-test: fix is_target_id() change")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON core kunit test can be executed without CONFIG_DAMON_VADDR. In the
case, vaddr DAMON ops is not registered. Meanwhile, ops registration
kunit test assumes the vaddr ops is registered. Check and handle the case
by registrering fake vaddr ops inside the test code.
Link: https://lkml.kernel.org/r/20240827030336.7930-6-sj@kernel.org
Fixes: 4f540f5ab4 ("mm/damon/core-test: add a kunit test case for ops registration")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON ops registration kunit test tests both vaddr and paddr use cases in
parts of the whole test cases. Basically testing only one ops use case is
enough. Do the test with only vaddr use case.
Link: https://lkml.kernel.org/r/20240827030336.7930-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When KASAN is enabled and built with clang:
mm/damon/lru_sort.c:199:12: error: stack frame size (2328) exceeds
limit (2048) in 'damon_lru_sort_apply_parameters' [-Werror,-Wframe-larger-than]
static int damon_lru_sort_apply_parameters(void)
^
1 error generated.
This is because damon_lru_sort_quota contains a large array, and
assigning this variable to a local variable causes a large amount of
stack space to be occupied.
So adjust local variable to dynamic allocation.
Link: https://lkml.kernel.org/r/20240723035513.20153-1-flyingpeng@tencent.com
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On powerpc 8xx huge_ptep_get() will need to know whether the given ptep is
a PTE entry or a PMD entry. This cannot be known with the PMD entry
itself because there is no easy way to know it from the content of the
entry.
So huge_ptep_get() will need to know either the size of the page or get
the pmd.
In order to be consistent with huge_ptep_get_and_clear(), give mm and
address to huge_ptep_get().
Link: https://lkml.kernel.org/r/cc00c70dd384298796a4e1b25d6c4eb306d3af85.1719928057.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The variable is supposed to be set via later migrate_pages() call.
However, the function does not do that when CONFIG_MIGRATION is unset.
Initialize the variable to zero.
Link: https://lkml.kernel.org/r/20240701165332.47495-1-sj@kernel.org
Fixes: 5311c0a2eee3 ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202406251102.GE07hqfQ-lkp@intel.com/
Cc: Honggyu Kim <honggyu.kim@sk.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON keeps the number of regions under max_nr_regions by skipping regions
split operations when doing so can make the number higher than the limit.
It works well for preventing violation of the limit. But, if somehow the
violation happens, it cannot recovery well depending on the situation. In
detail, if the real number of regions having different access pattern is
higher than the limit, the mechanism cannot reduce the number below the
limit. In such a case, the system could suffer from high monitoring
overhead of DAMON.
The violation can actually happen. For an example, the user could reduce
max_nr_regions while DAMON is running, to be lower than the current number
of regions. Fix the problem by repeating the merge operations with
increasing aggressiveness in kdamond_merge_regions() for the case, until
the limit is met.
[sj@kernel.org: increase regions merge aggressiveness while respecting min_nr_regions]
Link: https://lkml.kernel.org/r/20240626164753.46270-1-sj@kernel.org
[sj@kernel.org: ensure max threshold attempt for max_nr_regions violation]
Link: https://lkml.kernel.org/r/20240627163153.75969-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240624175814.89611-1-sj@kernel.org
Fixes: b9a6ac4e4e ("mm/damon: adaptively adjust regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_LRU_SORT contains code for handling of online DAMON parameters
update edge cases. It is no more necessary since damon_commit_ctx() takes
care of the cases. Remove the unnecessary code.
Link: https://lkml.kernel.org/r/20240618181809.82078-13-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_LRU_SORT manually manipulates the DAMON context struct for online
parameters update. Since the struct contains not only input parameters
but also internal status and operation results, it is not that simple.
Indeed, we found and fixed a few bugs in the code. Now DAMON core layer
provides a function for the usage, namely damon_commit_ctx(). Replace the
manual manipulation logic with the function. The core layer function
could have its own bugs, but this change removes a source of bugs.
Link: https://lkml.kernel.org/r/20240618181809.82078-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_RECLAIM contains code for handling of online DAMON parameters update
edge cases. It is no more necessary since damon_commit_ctx() takes care
of the cases. Remove the unnecessary code.
Link: https://lkml.kernel.org/r/20240618181809.82078-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_RECLAIM manually manipulates the DAMON context struct for online
parameters update. Since the struct contains not only input parameters
but also internal status and operation results, it is not that simple.
Indeed, we found and fixed a few bugs in the code. Now DAMON core layer
provides a function for the usage, namely damon_commit_ctx(). Replace the
manual manipulation logic with the function. The core layer function
could have its own bugs, but this change removes a source of bugs.
Link: https://lkml.kernel.org/r/20240618181809.82078-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The functions were for updating DAMON structs that may or may not be
partially populated. Hence it was not for only adding items, but also
removing unnecessary items and updating items in-place. A previous commit
has changed the functions to assume the structs are not partially
populated, and do only adding items. Make the names better explain the
behavior.
Link: https://lkml.kernel.org/r/20240618181809.82078-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon/sysfs-schemes.c contains code for handling of online DAMON
parameters update edge cases. The logics are no more necessary since
damon_commit_ctx() and damon_commit_quota_goals() takes care of the cases.
Remove the unnecessary code.
Link: https://lkml.kernel.org/r/20240618181809.82078-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function was for updating DAMON structs that may or may not be
partially populated. Hence it was not for only adding items, but also
removing unnecessary items and updating items in-place. A previous commit
has changed the function to assume the structs are not partially
populated, and do only adding items. Make the function name better
explain the behavior.
Link: https://lkml.kernel.org/r/20240618181809.82078-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon/sysfs.c contains code for handling of online DAMON parameters update
edge cases. It is no more necessary since damon_commit_ctx() takes care
of the cases. Remove the unnecessary code.
Link: https://lkml.kernel.org/r/20240618181809.82078-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_SYSFS manually manipulates the DAMOS quota structs for online quotal
goals parameter update. Since the struct contains not only input
parameters but also internal status and operation results, it is not that
simple. Now DAMON core layer provides a function for the usage, namely
damon_commit_quota_goals(). Replace the manual manipulation logic with
the function. The core layer function could have its own bugs, but this
change removes a source of bugs.
Link: https://lkml.kernel.org/r/20240618181809.82078-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_SYSFS manually manipulates DAMON context structs for online
parameters update. Since the struct contains not only input parameters
but also internal status and operation results, it is not that simple.
Indeed, we found and fixed a few bugs in the code. Now DAMON core layer
provides a function for the usage, namely damon_commit_ctx(). Replace the
manual manipulation logic with the function. The core layer function
could have its own bugs, but this change removes a source of bugs.
Link: https://lkml.kernel.org/r/20240618181809.82078-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement functions for supporting online DAMON context level parameters
update. The function receives two DAMON context structs. One is the
struct that currently being used by a kdamond and therefore to be updated.
The other one contains the parameters to be applied to the first one.
The function applies the new parameters to the destination struct while
keeping/updating the internal status and operation results. The function
should be called from DAMON context-update-safe place, like DAMON
callbacks.
Link: https://lkml.kernel.org/r/20240618181809.82078-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: introduce DAMON parameters online commit function".
DAMON context struct (damon_ctx) contains user requests (parameters),
internal status, and operation results. For flexible usages, DAMON API
users are encouraged to manually manipulate the struct. That works well
for simple use cases. However, it has turned out that it is not that
simple at least for online parameters udpate. It is easy to forget
properly maintaining internal status and operation results. Also, such
manual manipulation for online tuning is implemented multiple times on
DAMON API users including DAMON sysfs interface, DAMON_RECLAIM and
DAMON_LRU_SORT. As a result, we have multiple sources of bugs for same
problem. Actually we found and fixed a few bugs from online parameter
updating of DAMON API users.
Implement a function for online DAMON parameters update in core layer, and
replace DAMON API users' manual manipulation code for the use case. The
core layer function could still have bugs, but this change reduces the
source of bugs for the problem to one place.
This patch (of 12):
Implement functions for supporting online DAMOS quota goals parameters
update. The function receives two DAMOS quota structs. One is the struct
that currently being used by a kdamond and therefore to be updated. The
other one contains the parameters to be applied to the first one. The
function applies the new parameters to the destination struct while
keeping/updating the internal status. The function should be called from
parameters-update safe place, like DAMON callbacks.
Link: https://lkml.kernel.org/r/20240618181809.82078-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240618181809.82078-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch introduces DAMOS_MIGRATE_HOT action, which is similar to
DAMOS_MIGRATE_COLD, but proritizes hot pages.
It migrates pages inside the given region to the 'target_nid' NUMA node
in the sysfs.
Here is one of the example usage of this 'migrate_hot' action.
$ cd /sys/kernel/mm/damon/admin/kdamonds/<N>
$ cat contexts/<N>/schemes/<N>/action
migrate_hot
$ echo 0 > contexts/<N>/schemes/<N>/target_nid
$ echo commit > state
$ numactl -p 2 ./hot_cold 500M 600M &
$ numastat -c -p hot_cold
Per-node process memory usage (in MBs)
PID Node 0 Node 1 Node 2 Total
-------------- ------ ------ ------ -----
701 (hot_cold) 501 0 601 1101
Link: https://lkml.kernel.org/r/20240614030010.751-7-honggyu.kim@sk.com
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch introduces DAMOS_MIGRATE_COLD action, which is similar to
DAMOS_PAGEOUT, but migrate folios to the given 'target_nid' in the sysfs
instead of swapping them out.
The 'target_nid' sysfs knob informs the migration target node ID.
Here is one of the example usage of this 'migrate_cold' action.
$ cd /sys/kernel/mm/damon/admin/kdamonds/<N>
$ cat contexts/<N>/schemes/<N>/action
migrate_cold
$ echo 2 > contexts/<N>/schemes/<N>/target_nid
$ echo commit > state
$ numactl -p 0 ./hot_cold 500M 600M &
$ numastat -c -p hot_cold
Per-node process memory usage (in MBs)
PID Node 0 Node 1 Node 2 Total
-------------- ------ ------ ------ -----
701 (hot_cold) 501 0 601 1101
Since there are some common routines with pageout, many functions have
similar logics between pageout and migrate cold.
damon_pa_migrate_folio_list() is a minimized version of
shrink_folio_list().
Link: https://lkml.kernel.org/r/20240614030010.751-6-honggyu.kim@sk.com
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch adds target_nid under
/sys/kernel/mm/damon/admin/kdamonds/<N>/contexts/<N>/schemes/<N>/
The 'target_nid' can be used as the destination node for DAMOS actions
such as DAMOS_MIGRATE_{HOT,COLD} in the follow up patches.
[sj@kernel.org: document target_nid file]
Link: https://lkml.kernel.org/r/20240618213630.84846-3-sj@kernel.org
Link: https://lkml.kernel.org/r/20240614030010.751-4-honggyu.kim@sk.com
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damos_wmark_metric_value's return value is 'unsigned long', so returning
-EINVAL as 'unsigned long' may turn out to be very different from the
expected one (using 2's complement) and treat as usual matric's value.
So, fix that, checking if returned value is not 0.
Link: https://lkml.kernel.org/r/20240506180238.53842-1-sj@kernel.org
Fixes: ee801b7dd7 ("mm/damon/schemes: activate schemes based on a watermarks mechanism")
Signed-off-by: Alex Rusuf <yorha.op@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: misc fixes and improvements".
Add miscelleneous and non-urgent fixes and improvements for DAMON code,
selftests, and documents.
This patch (of 10):
damos_quota_init_priv() function should initialize all private fields of
struct damos_quota. However, it is not initializing ->esz_bp field. This
could result in use of uninitialized variable from
damon_feed_loop_next_input() function. There is no such issue at the
moment because every caller of the function is passing damos_quota object
that already having the field zero value. But we cannot guarantee the
future, and the function is not doing what it is promising. A bug is a
bug. This fix is for preventing possible future issues.
Link: https://lkml.kernel.org/r/20240503180318.72798-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240503180318.72798-2-sj@kernel.org
Fixes: 9294a037c0 ("mm/damon/core: implement goal-oriented feedback-driven quota auto-tuning")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All reclaim_pages() callers are setting 'ignore_references' parameter
'true'. In other words, the parameter is not really being used. Remove
the argument to make it simple.
Link: https://lkml.kernel.org/r/20240429224451.67081-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'pageout' DAMOS action implementation of 'paddr' DAMON operations set asks
reclaim_pages() to do page level access check if the user is not asking
DAMOS to do that on its own. Simplify the logic by making the check
always be done by 'paddr'.
Link: https://lkml.kernel.org/r/20240429224451.67081-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/paddr: simplify page level access re-check for
pageout.
The 'pageout' DAMOS action implementation of 'paddr' asks reclaim_pages()
to do page level access check again. But the user can ask 'paddr' to do
the page level access check on its own, using DAMOS filter of 'young page'
type. Meanwhile, 'paddr' is the only user of reclaim_pages() that asks
the page level access check.
Make 'paddr' does the page level access check on its own always, and
simplify reclaim_pages() by removing the page level access check request
handling logic. As a result of the change for reclaim_pages(),
reclaim_folio_list(), which is called by reclaim_pages(), also no more
need to do the page level access check. Simplify the function, too.
This patch (of 4):
'pageout' DAMOS action implementation of 'paddr' asks reclaim_pages() to
do the page level access check. User could ask DAMOS to do the page level
access check on its own using 'young page' type DAMOS filter. In the
case, pageout DAMOS action unnecessarily asks reclaim_pages() to do the
check again. Ask the page level access check only if the scheme is not
having the filter.
Link: https://lkml.kernel.org/r/20240429224451.67081-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240429224451.67081-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMOS filter of type YOUNG is defined, but not yet implemented by any
DAMON operations set. Add the implementation on 'paddr', the DAMON
operations set for the physical address space.
Link: https://lkml.kernel.org/r/20240426195247.100306-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Honggyu Kim <honggyu.kim@sk.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Define yet another DAMOS filter type, YOUNG. Like anon and memcg, the
type of filter will be applied to each page in the memory region, and see
if the page is accessed since the last check. Based on the 'matching'
parameter, the page is filtered out or in.
Note that this commit is adding only the type definition. The
implementation should be made by DAMON operations sets. A commit for the
implementation on 'paddr' DAMON operations set will follow.
Link: https://lkml.kernel.org/r/20240426195247.100306-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Honggyu Kim <honggyu.kim@sk.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_pa_mkold() receives physical address, get the folio covering the
address, and makes the folio as old. A following commit will reuse the
internal logic for marking a given folio as old. To avoid duplication of
the code, split the internal logic. Also, change the rmap walker
function's name from __damon_pa_mkold() to damon_folio_mkold_one(),
following the change of the caller's name and the naming rule that more
commonly used by other rmap walkers.
Link: https://lkml.kernel.org/r/20240426195247.100306-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Honggyu Kim <honggyu.kim@sk.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: add a DAMOS filter type for page granularity
access recheck".
DAMON provides its best-effort accuracy-overhead tradeoff under the
user-defined ranges of acceptable level of the monitoring accuracy and
overhead. A recent discussion for tiered memory management support from
DAMON[1] concluded that finding memory regions of specific access pattern
with low overhead despite of low accuracy via DAMON first, and then double
checking the access of the region again in a finer (e.g., page)
granularity could be a useful strategy for some DAMOS schemes.
Add a new type of DAMOS filter, namely 'young' for such a case. It checks
each page of DAMOS target region is accessed since the last check, and
filters it out or in if 'matching' parameter is 'true' or 'false',
respectively.
Because this is a filter type that applied in page granularity, the
support depends on DAMON operations set, similar to 'anon' and 'memcg'
DAMOS filter types. Implement the support on the DAMON operations set for
the physical address space, 'paddr', since one of the expected usages[1]
is based on the physical address space.
[1] https://lore.kernel.org/r/20240227235121.153277-1-sj@kernel.org
This patch (of 7):
damon_pa_young() receives physical address, get the folio covering the
address, and show if the folio is accessed since the last check. A
following commit will reuse the internal logic for checking access to a
given folio. To avoid duplication of the code, split the internal logic.
Also, change the rmap walker function's name from __damon_pa_young() to
damon_folio_young_one(), following the change of the caller's name and the
naming rule that more commonly used by other rmap walkers.
Link: https://lkml.kernel.org/r/20240426195247.100306-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240426195247.100306-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Honggyu Kim <honggyu.kim@sk.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
