If we just check "result & RX_DROP_UNUSABLE", this really only works
by accident, because SKB_DROP_REASON_SUBSYS_MAC80211_UNUSABLE got to
have the value 1, and SKB_DROP_REASON_SUBSYS_MAC80211_MONITOR is 2.
Fix this to really check the entire subsys mask for the value, so it
doesn't matter what the subsystem value is.
Fixes: 7f4e09700bdc ("wifi: mac80211: report all unusable beacon frames")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When associating to an MLD AP, links may be disabled. Create all
resources associated with a disabled link so that we can later enable it
without having to create these resources on the fly.
Fixes: 6d543b34dbcf ("wifi: mac80211: Support disabled links during association")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://lore.kernel.org/r/20230925173028.f9afdb26f6c7.I4e6e199aaefc1bf017362d64f3869645fa6830b5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the structure is not initialized then boolean types might be copied
into the tracing data without being initialised. This causes data from
the stack to leak into the trace and also triggers a UBSAN failure which
can easily be avoided here.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://lore.kernel.org/r/20230925171855.a9271ef53b05.I8180bae663984c91a3e036b87f36a640ba409817@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Lower layer device driver stop/wake TX by calling ieee80211_stop_queue()/
ieee80211_wake_queue() while hw scan. Sometimes hw scan and PTK rekey are
running in parallel, when M4 sent from wpa_supplicant arrive while the TX
queue is stopped, then the M4 will pending send, and then new key install
from wpa_supplicant. After TX queue wake up by lower layer device driver,
the M4 will be dropped by below call stack.
When key install started, the current key flag is set KEY_FLAG_TAINTED in
ieee80211_pairwise_rekey(), and then mac80211 wait key install complete by
lower layer device driver. Meanwhile ieee80211_tx_h_select_key() will return
TX_DROP for the M4 in step 12 below, and then ieee80211_free_txskb() called
by ieee80211_tx_dequeue(), so the M4 will not send and free, then the rekey
process failed becaue AP not receive M4. Please see details in steps below.
There are a interval between KEY_FLAG_TAINTED set for current key flag and
install key complete by lower layer device driver, the KEY_FLAG_TAINTED is
set in this interval, all packet including M4 will be dropped in this
interval, the interval is step 8~13 as below.
issue steps:
TX thread install key thread
1. stop_queue -idle-
2. sending M4 -idle-
3. M4 pending -idle-
4. -idle- starting install key from wpa_supplicant
5. -idle- =>ieee80211_key_replace()
6. -idle- =>ieee80211_pairwise_rekey() and set
currently key->flags |= KEY_FLAG_TAINTED
7. -idle- =>ieee80211_key_enable_hw_accel()
8. -idle- =>drv_set_key() and waiting key install
complete from lower layer device driver
9. wake_queue -waiting state-
10. re-sending M4 -waiting state-
11. =>ieee80211_tx_h_select_key() -waiting state-
12. drop M4 by KEY_FLAG_TAINTED -waiting state-
13. -idle- install key complete with success/fail
success: clear flag KEY_FLAG_TAINTED
fail: start disconnect
Hence add check in step 11 above to allow the EAPOL send out in the
interval. If lower layer device driver use the old key/cipher to encrypt
the M4, then AP received/decrypt M4 correctly, after M4 send out, lower
layer device driver install the new key/cipher to hardware and return
success.
If lower layer device driver use new key/cipher to send the M4, then AP
will/should drop the M4, then it is same result with this issue, AP will/
should kick out station as well as this issue.
issue log:
kworker/u16:4-5238 [000] 6456.108926: stop_queue: phy1 queue:0, reason:0
wpa_supplicant-961 [003] 6456.119737: rdev_tx_control_port: wiphy_name=phy1 name=wlan0 ifindex=6 dest=ARRAY[9e, 05, 31, 20, 9b, d0] proto=36488 unencrypted=0
wpa_supplicant-961 [003] 6456.119839: rdev_return_int_cookie: phy1, returned 0, cookie: 504
wpa_supplicant-961 [003] 6456.120287: rdev_add_key: phy1, netdev:wlan0(6), key_index: 0, mode: 0, pairwise: true, mac addr: 9e:05:31:20:9b:d0
wpa_supplicant-961 [003] 6456.120453: drv_set_key: phy1 vif:wlan0(2) sta:9e:05:31:20:9b:d0 cipher:0xfac04, flags=0x9, keyidx=0, hw_key_idx=0
kworker/u16:9-3829 [001] 6456.168240: wake_queue: phy1 queue:0, reason:0
kworker/u16:9-3829 [001] 6456.168255: drv_wake_tx_queue: phy1 vif:wlan0(2) sta:9e:05:31:20:9b:d0 ac:0 tid:7
kworker/u16:9-3829 [001] 6456.168305: cfg80211_control_port_tx_status: wdev(1), cookie: 504, ack: false
wpa_supplicant-961 [003] 6459.167982: drv_return_int: phy1 - -110
issue call stack:
nl80211_frame_tx_status+0x230/0x340 [cfg80211]
cfg80211_control_port_tx_status+0x1c/0x28 [cfg80211]
ieee80211_report_used_skb+0x374/0x3e8 [mac80211]
ieee80211_free_txskb+0x24/0x40 [mac80211]
ieee80211_tx_dequeue+0x644/0x954 [mac80211]
ath10k_mac_tx_push_txq+0xac/0x238 [ath10k_core]
ath10k_mac_op_wake_tx_queue+0xac/0xe0 [ath10k_core]
drv_wake_tx_queue+0x80/0x168 [mac80211]
__ieee80211_wake_txqs+0xe8/0x1c8 [mac80211]
_ieee80211_wake_txqs+0xb4/0x120 [mac80211]
ieee80211_wake_txqs+0x48/0x80 [mac80211]
tasklet_action_common+0xa8/0x254
tasklet_action+0x2c/0x38
__do_softirq+0xdc/0x384
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230801064751.25803-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reject configuring a channel for MLO if either EHT is not supported or
the BSS does not have the correct ML element. This avoids trying to do
a multi-link association with a misconfigured AP.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.80c3b8e5a344.Iaa2d466ee6280994537e1ae7ab9256a27934806f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With this cfg80211 can report the link that caused the error to
userspace which is then able to react to it by e.g. removing the link
from the association and retrying.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.275fc7f5c426.I8086c0fdbbf92537d6a8b8e80b33387fcfd5553d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When one of the links (other than the assoc_link) is misconfigured
and cannot work the association will fail. However, userspace was not
able to tell that the operation only failed because of a problem with
one of the links. Fix this, by allowing the driver to set a per-link
error code and reporting the (first) offending link by setting the
bad_attr accordingly.
This only allows us to report the first error, but that is sufficient
for userspace to e.g. remove the offending link and retry.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.ebe63c0bd513.I40799998f02bf987acee1501a2522dc98bb6eb5a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Support antenna control for injection by parsing the antenna
radiotap field (which may be presented multiple times) and
telling the driver about the resulting antenna bitmap. Of
course there's no guarantee the driver will actually honour
this, just like any other injection control.
If misconfigured, i.e. the injected HT/VHT MCS needs more
chains than antennas are configured, the bitmap is reset to
zero, indicating no selection.
For now this is only set up for two anntenas so we keep more
free bits, but that can be trivially extended if any driver
implements support for it that can deal with hardware with
more antennas.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.f71001aa4da9.I00ccb762a806ea62bc3d728fa3a0d29f4f285eeb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Support handling of advertised TID-to-link mapping elements received
in a beacon.
These elements are used by AP MLD to disable specific links and force
all clients to stop using these links.
By default if no TID-to-link mapping is advertised, all TIDs shall be
mapped to all links.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.623c4b692ff9.Iab0a6f561d85b8ab6efe541590985a2b6e9e74aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Connection to an AP that is running a CSA flow may end up with a
failure as the AP might change its channel during the connection
flow while we do not track the channel change yet.
Avoid that by rejecting a connection to such an AP.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.e5001a762a4a.I9745c695f3403b259ad000ce94110588a836c04a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rx_chains was set only upon registration and it we rely on it for the
active chains upon SMPS configuration after association.
When we use the set_antenna() API to limit the rx_chains from 2 to 1,
this caused issues with iwlwifi since we still had 2 active_chains
requested.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.2dde4da246b2.I904223c868c77cf2ba132a3088fe6506fcbb443b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Using the full struct cfg80211_ap_settings for an update is
misleading, since most settings cannot be updated. Split the
update case off into a new struct cfg80211_ap_update.
Change-Id: I3ba4dd9280938ab41252f145227a7005edf327e4
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers should really be able to rely on the wiphy mutex
being held all the time, unless otherwise documented. For
ethtool, that wasn't quite right. Fix and clarify this in
both code and documentation.
Reported-by: syzbot+c12a771b218dcbba32e1@syzkaller.appspotmail.com
Fixes: 0e8185ce1dde ("wifi: mac80211: check wiphy mutex in ops")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cisco AP module 9115 with FW 17.3 has a bug and sends a too
large maximum MPDU length in the association response
(indicating 12k) that it cannot actually process.
Work around that by taking the minimum between what's in the
association response and the BSS elements (from beacon or
probe response).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230918140607.d1966a9a532e.I090225babb7cd4d1081ee9acd40e7de7e41c15ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the scan request includes a non broadcast BSSID, when adding the
scan parameters for 6GHz collocated scanning, do not include entries
that do not match the given BSSID.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230918140607.6d31d2a96baf.I6c4e3e3075d1d1878ee41f45190fdc6b86f18708@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When returning from ieee80211_key_link(), the key needs to
have been freed or successfully installed. This was missed
in a number of error paths, fix it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When ieee80211_key_link() is called by ieee80211_gtk_rekey_add()
but returns 0 due to KRACK protection (identical key reinstall),
ieee80211_gtk_rekey_add() will still return a pointer into the
key, in a potential use-after-free. This normally doesn't happen
since it's only called by iwlwifi in case of WoWLAN rekey offload
which has its own KRACK protection, but still better to fix, do
that by returning an error code and converting that to success on
the cfg80211 boundary only, leaving the error for bad callers of
ieee80211_gtk_rekey_add().
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Current release - regressions:
- bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE
- netfilter: fix entries val in rule reset audit log
- eth: stmmac: fix incorrect rxq|txq_stats reference
Previous releases - regressions:
- ipv4: fix null-deref in ipv4_link_failure
- netfilter:
- fix several GC related issues
- fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
- eth: team: fix null-ptr-deref when team device type is changed
- eth: i40e: fix VF VLAN offloading when port VLAN is configured
- eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB
Previous releases - always broken:
- core: fix ETH_P_1588 flow dissector
- mptcp: fix several connection hang-up conditions
- bpf:
- avoid deadlock when using queue and stack maps from NMI
- add override check to kprobe multi link attach
- hsr: properly parse HSRv1 supervisor frames.
- eth: igc: fix infinite initialization loop with early XDP redirect
- eth: octeon_ep: fix tx dma unmap len values in SG
- eth: hns3: fix GRE checksum offload issue
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=AoVg
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
Current release - regressions:
- bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE
- netfilter: fix entries val in rule reset audit log
- eth: stmmac: fix incorrect rxq|txq_stats reference
Previous releases - regressions:
- ipv4: fix null-deref in ipv4_link_failure
- netfilter:
- fix several GC related issues
- fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
- eth: team: fix null-ptr-deref when team device type is changed
- eth: i40e: fix VF VLAN offloading when port VLAN is configured
- eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB
Previous releases - always broken:
- core: fix ETH_P_1588 flow dissector
- mptcp: fix several connection hang-up conditions
- bpf:
- avoid deadlock when using queue and stack maps from NMI
- add override check to kprobe multi link attach
- hsr: properly parse HSRv1 supervisor frames.
- eth: igc: fix infinite initialization loop with early XDP redirect
- eth: octeon_ep: fix tx dma unmap len values in SG
- eth: hns3: fix GRE checksum offload issue"
* tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
sfc: handle error pointers returned by rhashtable_lookup_get_insert_fast()
igc: Expose tx-usecs coalesce setting to user
octeontx2-pf: Do xdp_do_flush() after redirects.
bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI
net: ena: Flush XDP packets on error.
net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()
net: hinic: Fix warning-hinic_set_vlan_fliter() warn: variable dereferenced before check 'hwdev'
netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
netfilter: nf_tables: fix memleak when more than 255 elements expired
netfilter: nf_tables: disable toggling dormant table state more than once
vxlan: Add missing entries to vxlan_get_size()
net: rds: Fix possible NULL-pointer dereference
team: fix null-ptr-deref when team device type is changed
net: bridge: use DEV_STATS_INC()
net: hns3: add 5ms delay before clear firmware reset irq source
net: hns3: fix fail to delete tc flower rules during reset issue
net: hns3: only enable unicast promisc when mac table full
net: hns3: fix GRE checksum offload issue
net: hns3: add cmdq check for vf periodic service task
net: stmmac: fix incorrect rxq|txq_stats reference
...
This adds handling of MSG_ZEROCOPY flag on transmission path:
1) If this flag is set and zerocopy transmission is possible (enabled
in socket options and transport allows zerocopy), then non-linear
skb will be created and filled with the pages of user's buffer.
Pages of user's buffer are locked in memory by 'get_user_pages()'.
2) Replaces way of skb owning: instead of 'skb_set_owner_sk_safe()' it
calls 'skb_set_owner_w()'. Reason of this change is that
'__zerocopy_sg_from_iter()' increments 'sk_wmem_alloc' of socket, so
to decrease this field correctly, proper skb destructor is needed:
'sock_wfree()'. This destructor is set by 'skb_set_owner_w()'.
3) Adds new callback to 'struct virtio_transport': 'can_msgzerocopy'.
If this callback is set, then transport needs extra check to be able
to send provided number of buffers in zerocopy mode. Currently, the
only transport that needs this callback set is virtio, because this
transport adds new buffers to the virtio queue and we need to check,
that number of these buffers is less than size of the queue (it is
required by virtio spec). vhost and loopback transports don't need
this check.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For tap device new skb is created and data from the current skb is
copied to it. This adds copying data from non-linear skb to new
the skb.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For non-linear skb use its pages from fragment array as buffers in
virtio tx queue. These pages are already pinned by 'get_user_pages()'
during such skb creation.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is preparation patch for MSG_ZEROCOPY support. It adds handling of
non-linear skbs by replacing direct calls of 'memcpy_to_msg()' with
'skb_copy_datagram_iter()'. Main advantage of the second one is that it
can handle paged part of the skb by using 'kmap()' on each page, but if
there are no pages in the skb, it behaves like simple copying to iov
iterator. This patch also adds new field to the control block of skb -
this value shows current offset in the skb to read next portion of data
(it doesn't matter linear it or not). Idea behind this field is that
'skb_copy_datagram_iter()' handles both types of skb internally - it
just needs an offset from which to copy data from the given skb. This
offset is incremented on each read from skb. This approach allows to
simplify handling of both linear and non-linear skbs, because for
linear skb we need to call 'skb_pull()' after reading data from it,
while in non-linear case we need to update 'data_len'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=dTwV
-----END PGP SIGNATURE-----
Merge tag 'nf-23-09-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
The following three patches fix regressions in the netfilter subsystem:
1. Reject attempts to repeatedly toggle the 'dormant' flag in a single
transaction. Doing so makes nf_tables lose track of the real state
vs. the desired state. This ends with an attempt to unregister hooks
that were never registered in the first place, which yields a splat.
2. Fix element counting in the new nftables garbage collection infra
that came with 6.5: More than 255 expired elements wraps a counter
which results in memory leak.
3. Since 6.4 ipset can BUG when a set is renamed while a CREATE command
is in progress, fix from Jozsef Kadlecsik.
* tag 'nf-23-09-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
netfilter: nf_tables: fix memleak when more than 255 elements expired
netfilter: nf_tables: disable toggling dormant table state more than once
====================
Link: https://lore.kernel.org/r/20230920084156.4192-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This fixes the following warnings:
net/bluetooth/hci_core.c: In function ‘hci_register_dev’:
net/bluetooth/hci_core.c:2620:54: warning: ‘%d’ directive output may
be truncated writing between 1 and 10 bytes into a region of size 5
[-Wformat-truncation=]
2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
| ^~
net/bluetooth/hci_core.c:2620:50: note: directive argument in the range
[0, 2147483647]
2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
| ^~~~~~~
net/bluetooth/hci_core.c:2620:9: note: ‘snprintf’ output between 5 and
14 bytes into a destination of size 8
2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
While executing the Android 13 CTS Verifier Secure Server test on a
ChromeOS device, it was observed that the Bluetooth host initiates
authentication for an RFCOMM connection after SSP completes.
When this happens, some Intel Bluetooth controllers, like AC9560, would
disconnect with "Connection Rejected due to Security Reasons (0x0e)".
Historically, BlueZ did not mandate this authentication while an
authenticated combination key was already in use for the connection.
This behavior was changed since commit 7b5a9241b780
("Bluetooth: Introduce requirements for security level 4").
So, this patch addresses the aforementioned disconnection issue by
restoring the previous behavior.
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_listen_cis shall only return -EADDRINUSE if the listening socket has
the destination set to BDADDR_ANY otherwise if the destination is set to
a specific address it is for broadcast which shall be ignored.
Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Syzbot found a bug "BUG: sleeping function called from invalid context
at kernel/locking/mutex.c:580". It is because hci_link_tx_to holds an
RCU read lock and calls hci_disconnect which would hold a mutex lock
since the commit a13f316e90fd ("Bluetooth: hci_conn: Consolidate code
for aborting connections"). Here's an example call trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xfc/0x174 lib/dump_stack.c:106
___might_sleep+0x4a9/0x4d3 kernel/sched/core.c:9663
__mutex_lock_common kernel/locking/mutex.c:576 [inline]
__mutex_lock+0xc7/0x6e7 kernel/locking/mutex.c:732
hci_cmd_sync_queue+0x3a/0x287 net/bluetooth/hci_sync.c:388
hci_abort_conn+0x2cd/0x2e4 net/bluetooth/hci_conn.c:1812
hci_disconnect+0x207/0x237 net/bluetooth/hci_conn.c:244
hci_link_tx_to net/bluetooth/hci_core.c:3254 [inline]
__check_timeout net/bluetooth/hci_core.c:3419 [inline]
__check_timeout+0x310/0x361 net/bluetooth/hci_core.c:3399
hci_sched_le net/bluetooth/hci_core.c:3602 [inline]
hci_tx_work+0xe8f/0x12d0 net/bluetooth/hci_core.c:3652
process_one_work+0x75c/0xba1 kernel/workqueue.c:2310
worker_thread+0x5b2/0x73a kernel/workqueue.c:2457
kthread+0x2f7/0x30b kernel/kthread.c:319
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298
This patch releases RCU read lock before calling hci_disconnect and
reacquires it afterward to fix the bug.
Fixes: a13f316e90fd ("Bluetooth: hci_conn: Consolidate code for aborting connections")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When HCI_QUIRK_STRICT_DUPLICATE_FILTER is set LE scanning requires
periodic restarts of the scanning procedure as the controller would
consider device previously found as duplicated despite of RSSI changes,
but in order to set the scan timeout properly set le_scan_restart needs
to be synchronous so it shall not use hci_cmd_sync_queue which defers
the command processing to cmd_sync_work.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-bluetooth/578e6d7afd676129decafba846a933f5@agner.ch/#t
Fixes: 27d54b778ad1 ("Bluetooth: Rework le_scan_restart for hci_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_req_prepare_suspend() has been deprecated in favor of
hci_suspend_sync().
Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Yao Xiao <xiaoyao@rock-chips.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Don't populate the read-only array lanes on the stack, instead make
it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kyle Zeng reported that there is a race between IPSET_CMD_ADD and IPSET_CMD_SWAP
in netfilter/ip_set, which can lead to the invocation of `__ip_set_put` on a
wrong `set`, triggering the `BUG_ON(set->ref == 0);` check in it.
The race is caused by using the wrong reference counter, i.e. the ref counter instead
of ref_netlink.
Fixes: 24e227896bbf ("netfilter: ipset: Add schedule point in call_ad().")
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Closes: https://lore.kernel.org/netfilter-devel/ZPZqetxOmH+w%2Fmyc@westworld/#r
Tested-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
When more than 255 elements expired we're supposed to switch to a new gc
container structure.
This never happens: u8 type will wrap before reaching the boundary
and nft_trans_gc_space() always returns true.
This means we recycle the initial gc container structure and
lose track of the elements that came before.
While at it, don't deref 'gc' after we've passed it to call_rcu.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
nft -f -<<EOF
add table ip t
add table ip t { flags dormant; }
add chain ip t c { type filter hook input priority 0; }
add table ip t
EOF
Triggers a splat from nf core on next table delete because we lose
track of right hook register state:
WARNING: CPU: 2 PID: 1597 at net/netfilter/core.c:501 __nf_unregister_net_hook
RIP: 0010:__nf_unregister_net_hook+0x41b/0x570
nf_unregister_net_hook+0xb4/0xf0
__nf_tables_unregister_hook+0x160/0x1d0
[..]
The above should have table in *active* state, but in fact no
hooks were registered.
Reject on/off/on games rather than attempting to fix this.
Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates")
Reported-by: "Lee, Cherie-Anne" <cherie.lee@starlabs.sg>
Cc: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Cc: info@starlabs.sg
Signed-off-by: Florian Westphal <fw@strlen.de>
In rds_rdma_cm_event_handler_cmn() check, if conn pointer exists
before dereferencing it as rdma_set_service_type() argument
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: fd261ce6a30e ("rds: rdma: update rdma transport for tos")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have data-races while reading np->srcprefs
Switch the field to a plain byte, add READ_ONCE()
and WRITE_ONCE() annotations where needed,
and IPV6_ADDR_PREFERENCES setsockopt() can now be lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230918142321.1794107-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Bugfixes:
* Various O_DIRECT related fixes from Trond
* Error handling
* Locking issues
* Use the correct commit infor for joining page groups
* Fixes for rescheduling IO
* Sunrpc bad verifier fixes
* Report EINVAL errors from connect()
* Revalidate creds that the server has rejected
* Revert "SUNRPC: Fail faster on bad verifier"
* Fix pNFS session trunking when MDS=DS
* Fix zero-value filehandles for post-open getattr operations
* Fix compiler warning about tautological comparisons
* Revert "SUNRPC: clean up integer overflow check" before Trond's fix
-----BEGIN PGP SIGNATURE-----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=M6aI
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.6-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Various O_DIRECT related fixes from Trond:
- Error handling
- Locking issues
- Use the correct commit info for joining page groups
- Fixes for rescheduling IO
Sunrpc bad verifier fixes:
- Report EINVAL errors from connect()
- Revalidate creds that the server has rejected
- Revert "SUNRPC: Fail faster on bad verifier"
Misc:
- Fix pNFS session trunking when MDS=DS
- Fix zero-value filehandles for post-open getattr operations
- Fix compiler warning about tautological comparisons
- Revert 'SUNRPC: clean up integer overflow check' before Trond's fix"
* tag 'nfs-for-6.6-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Silence compiler complaints about tautological comparisons
Revert "SUNRPC: clean up integer overflow check"
NFSv4.1: fix zero value filehandle in post open getattr
NFSv4.1: fix pnfs MDS=DS session trunking
Revert "SUNRPC: Fail faster on bad verifier"
SUNRPC: Mark the cred for revalidation if the server rejects it
NFS/pNFS: Report EINVAL errors from connect() to the server
NFS: More fixes for nfs_direct_write_reschedule_io()
NFS: Use the correct commit info in nfs_join_page_group()
NFS: More O_DIRECT accounting fixes for error paths
NFS: Fix O_DIRECT locking issues
NFS: Fix error handling for O_DIRECT write scheduling
According to RFC 8684 section 3.3:
A connection is not closed unless [...] or an implementation-specific
connection-level send timeout.
Currently the MPTCP protocol does not implement such timeout, and
connection timing-out at the TCP-level never move to close state.
Introduces a catch-up condition at subflow close time to move the
MPTCP socket to close, too.
That additionally allows removing similar existing inside the worker.
Finally, allow some additional timeout for plain ESTABLISHED mptcp
sockets, as the protocol allows creating new subflows even at that
point and making the connection functional again.
This issue is actually present since the beginning, but it is basically
impossible to solve without a long chain of functional pre-requisites
topped by commit bbd49d114d57 ("mptcp: consolidate transition to
TCP_CLOSE in mptcp_do_fastclose()"). When backporting this current
patch, please also backport this other commit as well.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/430
Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The msk socket uses to different timeout to track close related
events and retransmissions. The existing helpers do not indicate
clearly which timer they actually touch, making the related code
quite confusing.
Change the existing helpers name to avoid such confusion. No
functional change intended.
This patch is linked to the next one ("mptcp: fix dangling connection
hang-up"). The two patches are supposed to be backported together.
Cc: stable@vger.kernel.org # v5.11+
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
