WARN once instead of triggering a BUG if xa_insert() fails because it
encountered an existing entry. While KVM guarantees there should be no
existing entry, there's no reason to BUG the kernel, as KVM needs to
gracefully handle failure anyways.
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241009150455.1057573-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that KVM loads from vcpu_array if and only if the target index is
valid with respect to online_vcpus, i.e. now that it is safe to erase a
not-fully-onlined vCPU entry, revert to storing into vcpu_array before
success is guaranteed.
If xa_store() fails, which _should_ be impossible, then putting the vCPU's
reference to 'struct kvm' results in a refcounting bug as the vCPU fd has
been installed and owns the vCPU's reference.
This was found by inspection, but forcing the xa_store() to fail
confirms the problem:
| Unable to handle kernel paging request at virtual address ffff800080ecd960
| Call trace:
| _raw_spin_lock_irq+0x2c/0x70
| kvm_irqfd_release+0x24/0xa0
| kvm_vm_release+0x1c/0x38
| __fput+0x88/0x2ec
| ____fput+0x10/0x1c
| task_work_run+0xb0/0xd4
| do_exit+0x210/0x854
| do_group_exit+0x70/0x98
| get_signal+0x6b0/0x73c
| do_signal+0xa4/0x11e8
| do_notify_resume+0x60/0x12c
| el0_svc+0x64/0x68
| el0t_64_sync_handler+0x84/0xfc
| el0t_64_sync+0x190/0x194
| Code: b9000909 d503201f 2a1f03e1 52800028 (88e17c08)
Practically speaking, this is a non-issue as xa_store() can't fail, absent
a nasty kernel bug. But the code is visually jarring and technically
broken.
This reverts commit afb2acb2e3.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michal Luczaj <mhal@rbox.co>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Reported-by: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241009150455.1057573-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
During vCPU creation, acquire vcpu->mutex prior to exposing the vCPU to
userspace, and hold the mutex until online_vcpus is bumped, i.e. until the
vCPU is fully online from KVM's perspective.
To ensure asynchronous vCPU ioctls also wait for the vCPU to come online,
explicitly check online_vcpus at the start of kvm_vcpu_ioctl(), and take
the vCPU's mutex to wait if necessary (having to wait for any ioctl should
be exceedingly rare, i.e. not worth optimizing).
Reported-by: Will Deacon <will@kernel.org>
Reported-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/all/20240730155646.1687-1-will@kernel.org
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241009150455.1057573-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Constify an unmodified structure used in linking vfio and kvm.
(Christophe JAILLET)
- Add ID for an additional hardware SKU supported by the nvgrace-gpu
vfio-pci variant driver. (Ankit Agrawal)
- Fix incorrect signed cast in QAT vfio-pci variant driver, negating
test in check_add_overflow(), though still caught by later tests.
(Giovanni Cabiddu)
- Additional debugfs attributes exposed in hisi_acc vfio-pci variant
driver for migration debugging. (Longfang Liu)
- Migration support is added to the virtio vfio-pci variant driver,
becoming the primary feature of the driver while retaining emulation
of virtio legacy support as a secondary option. (Yishai Hadas)
- Fixes to a few unwind flows in the mlx5 vfio-pci driver discovered
through reviews of the virtio variant driver. (Yishai Hadas)
- Fix an unlikely issue where a PCI device exposed to userspace with
an unknown capability at the base of the extended capability chain
can overflow an array index. (Avihai Horon)
-----BEGIN PGP SIGNATURE-----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=nTtY
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.13-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Constify an unmodified structure used in linking vfio and kvm
(Christophe JAILLET)
- Add ID for an additional hardware SKU supported by the nvgrace-gpu
vfio-pci variant driver (Ankit Agrawal)
- Fix incorrect signed cast in QAT vfio-pci variant driver, negating
test in check_add_overflow(), though still caught by later tests
(Giovanni Cabiddu)
- Additional debugfs attributes exposed in hisi_acc vfio-pci variant
driver for migration debugging (Longfang Liu)
- Migration support is added to the virtio vfio-pci variant driver,
becoming the primary feature of the driver while retaining emulation
of virtio legacy support as a secondary option (Yishai Hadas)
- Fixes to a few unwind flows in the mlx5 vfio-pci driver discovered
through reviews of the virtio variant driver (Yishai Hadas)
- Fix an unlikely issue where a PCI device exposed to userspace with an
unknown capability at the base of the extended capability chain can
overflow an array index (Avihai Horon)
* tag 'vfio-v6.13-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: Properly hide first-in-list PCIe extended capability
vfio/mlx5: Fix unwind flows in mlx5vf_pci_save/resume_device_data()
vfio/mlx5: Fix an unwind issue in mlx5vf_add_migration_pages()
vfio/virtio: Enable live migration once VIRTIO_PCI was configured
vfio/virtio: Add PRE_COPY support for live migration
vfio/virtio: Add support for the basic live migration functionality
virtio-pci: Introduce APIs to execute device parts admin commands
virtio: Manage device and driver capabilities via the admin commands
virtio: Extend the admin command to include the result size
virtio_pci: Introduce device parts access commands
Documentation: add debugfs description for hisi migration
hisi_acc_vfio_pci: register debugfs for hisilicon migration driver
hisi_acc_vfio_pci: create subfunction for data reading
hisi_acc_vfio_pci: extract public functions for container_of
vfio/qat: fix overflow check in qat_vf_resume_write()
vfio/nvgrace-gpu: Add a new GH200 SKU to the devid table
kvm/vfio: Constify struct kvm_device_ops
essentially guessing which pfns are refcounted pages. The reason to
do so was that KVM needs to map both non-refcounted pages (for example
BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP VMAs that contain
refcounted pages. However, the result was security issues in the past,
and more recently the inability to map VM_IO and VM_PFNMAP memory
that _is_ backed by struct page but is not refcounted. In particular
this broke virtio-gpu blob resources (which directly map host graphics
buffers into the guest as "vram" for the virtio-gpu device) with the
amdgpu driver, because amdgpu allocates non-compound higher order pages
and the tail pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the per-architecture
code, to always work on the pfn whenever possible. The large series that
did this, from David Stevens and Sean Christopherson, also cleaned up
substantially the set of functions that provided arch code with the
pfn for a host virtual addresses. The previous maze of twisty little
passages, all different, is replaced by five functions (__gfn_to_page,
__kvm_faultin_pfn, the non-__ versions of these two, and kvm_prefetch_pages)
saving almost 200 lines of code.
ARM:
* Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
* Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This call
was introduced in PSCIv1.3 as a mechanism to request hibernation,
similar to the S4 state in ACPI
* Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
* PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
* Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
* Avoid emulated MMIO completion if userspace has requested synchronous
external abort injection
* Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
* Add iocsr and mmio bus simulation in kernel.
* Add in-kernel interrupt controller emulation.
* Add support for virtualization extensions to the eiointc irqchip.
PPC:
* Drop lingering and utterly obsolete references to PPC970 KVM, which was
removed 10 years ago.
* Fix incorrect documentation references to non-existing ioctls
RISC-V:
* Accelerate KVM RISC-V when running as a guest
* Perf support to collect KVM guest statistics from host side
s390:
* New selftests: more ucontrol selftests and CPU model sanity checks
* Support for the gen17 CPU model
* List registers supported by KVM_GET/SET_ONE_REG in the documentation
x86:
* Cleanup KVM's handling of Accessed and Dirty bits to dedup code, improve
documentation, harden against unexpected changes. Even if the hardware
A/D tracking is disabled, it is possible to use the hardware-defined A/D
bits to track if a PFN is Accessed and/or Dirty, and that removes a lot
of special cases.
* Elide TLB flushes when aging secondary PTEs, as has been done in x86's
primary MMU for over 10 years.
* Recover huge pages in-place in the TDP MMU when dirty page logging is
toggled off, instead of zapping them and waiting until the page is
re-accessed to create a huge mapping. This reduces vCPU jitter.
* Batch TLB flushes when dirty page logging is toggled off. This reduces
the time it takes to disable dirty logging by ~3x.
* Remove the shrinker that was (poorly) attempting to reclaim shadow page
tables in low-memory situations.
* Clean up and optimize KVM's handling of writes to MSR_IA32_APICBASE.
* Advertise CPUIDs for new instructions in Clearwater Forest
* Quirk KVM's misguided behavior of initialized certain feature MSRs to
their maximum supported feature set, which can result in KVM creating
invalid vCPU state. E.g. initializing PERF_CAPABILITIES to a non-zero
value results in the vCPU having invalid state if userspace hides PDCM
from the guest, which in turn can lead to save/restore failures.
* Fix KVM's handling of non-canonical checks for vCPUs that support LA57
to better follow the "architecture", in quotes because the actual
behavior is poorly documented. E.g. most MSR writes and descriptor
table loads ignore CR4.LA57 and operate purely on whether the CPU
supports LA57.
* Bypass the register cache when querying CPL from kvm_sched_out(), as
filling the cache from IRQ context is generally unsafe; harden the
cache accessors to try to prevent similar issues from occuring in the
future. The issue that triggered this change was already fixed in 6.12,
but was still kinda latent.
* Advertise AMD_IBPB_RET to userspace, and fix a related bug where KVM
over-advertises SPEC_CTRL when trying to support cross-vendor VMs.
* Minor cleanups
* Switch hugepage recovery thread to use vhost_task. These kthreads can
consume significant amounts of CPU time on behalf of a VM or in response
to how the VM behaves (for example how it accesses its memory); therefore
KVM tried to place the thread in the VM's cgroups and charge the CPU
time consumed by that work to the VM's container. However the kthreads
did not process SIGSTOP/SIGCONT, and therefore cgroups which had KVM
instances inside could not complete freezing. Fix this by replacing the
kthread with a PF_USER_WORKER thread, via the vhost_task abstraction.
Another 100+ lines removed, with generally better behavior too like
having these threads properly parented in the process tree.
* Revert a workaround for an old CPU erratum (Nehalem/Westmere) that didn't
really work; there was really nothing to work around anyway: the broken
patch was meant to fix nested virtualization, but the PERF_GLOBAL_CTRL
MSR is virtualized and therefore unaffected by the erratum.
* Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is 'y'.
x86 selftests:
* x86 selftests can now use AVX.
Documentation:
* Use rST internal links
* Reorganize the introduction to the API document
Generic:
* Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock instead
of RCU, so that running a vCPU on a different task doesn't encounter long
due to having to wait for all CPUs become quiescent. In general both reads
and writes are rare, but userspace that supports confidential computing is
introducing the use of "helper" vCPUs that may jump from one host processor
to another. Those will be very happy to trigger a synchronize_rcu(), and
the effect on performance is quite the disaster.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmc9MRYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP00QgArxqxBIGLCW5t7bw7vtNq63QYRyh4
dTiDguLiYQJ+AXmnRu11R6aPC7HgMAvlFCCmH+GEce4WEgt26hxCmncJr/aJOSwS
letCS7TrME16PeZvh25A1nhPBUw6mTF1qqzgcdHMrqXG8LuHoGcKYGSRVbkf3kfI
1ZoMq1r8ChXbVVmCx9DQ3gw1TVr5Dpjs2voLh8rDSE9Xpw0tVVabHu3/NhQEz/F+
t8/nRaqH777icCHIf9PCk5HnarHxLAOvhM2M0Yj09PuBcE5fFQxpxltw/qiKQqqW
ep4oquojGl87kZnhlDaac2UNtK90Ws+WxxvCwUmbvGN0ZJVaQwf4FvTwig==
=lWpE
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
Making sure that struct fd instances are destroyed in the same
scope where they'd been created, getting rid of reassignments
and passing them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdikAAKCRBZ7Krx/gZQ
69nJAQCmbQHK3TGUbQhOw6MJXOK9ezpyEDN3FZb4jsu38vTIdgEA6OxAYDO2m2g9
CN18glYmD3wRyU6Bwl4vGODouSJvDgA=
=gVH3
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
kvm_vm_create_worker_thread() is meant to be used for kthreads that
can consume significant amounts of CPU time on behalf of a VM or in
response to how the VM behaves (for example how it accesses its memory).
Therefore it wants to charge the CPU time consumed by that work to
the VM's container.
However, because of these threads, cgroups which have kvm instances
inside never complete freezing. This can be trivially reproduced:
root@test ~# mkdir /sys/fs/cgroup/test
root@test ~# echo $$ > /sys/fs/cgroup/test/cgroup.procs
root@test ~# qemu-system-x86_64 -nographic -enable-kvm
and in another terminal:
root@test ~# echo 1 > /sys/fs/cgroup/test/cgroup.freeze
root@test ~# cat /sys/fs/cgroup/test/cgroup.events
populated 1
frozen 0
The cgroup freezing happens in the signal delivery path but
kvm_nx_huge_page_recovery_worker, while joining non-root cgroups, never
calls into the signal delivery path and thus never gets frozen. Because
the cgroup freezer determines whether a given cgroup is frozen by
comparing the number of frozen threads to the total number of threads
in the cgroup, the cgroup never becomes frozen and users waiting for
the state transition may hang indefinitely.
Since the worker kthread is tied to a user process, it's better if
it behaves similarly to user tasks as much as possible, including
being able to send SIGSTOP and SIGCONT. In fact, vhost_task is all
that kvm_vm_create_worker_thread() wanted to be and more: not only it
inherits the userspace process's cgroups, it has other niceties like
being parented properly in the process tree. Use it instead of the
homegrown alternative.
Incidentally, the new code is also better behaved when you flip recovery
back and forth to disabled and back to enabled. If your recovery period
is 1 minute, it will run the next recovery after 1 minute independent
of how many times you flipped the parameter.
(Commit message based on emails from Tejun).
Reported-by: Tejun Heo <tj@kernel.org>
Reported-by: Luca Boccassi <bluca@debian.org>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-by: Luca Boccassi <bluca@debian.org>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code, improve
documentation, harden against unexpected changes, and to simplify
A/D-disabled MMUs by using the hardware-defined A/D bits to track if a
PFN is Accessed and/or Dirty.
- Elide TLB flushes when aging SPTEs, as has been done in x86's primary
MMU for over 10 years.
- Batch TLB flushes when zapping collapsible TDP MMU SPTEs, i.e. when
dirty logging is toggled off, which reduces the time it takes to disable
dirty logging by ~3x.
- Recover huge pages in-place in the TDP MMU instead of zapping the SP
and waiting until the page is re-accessed to create a huge mapping.
Proactively installing huge pages can reduce vCPU jitter in extreme
scenarios.
- Remove support for (poorly) reclaiming page tables in shadow MMUs via
the primary MMU's shrinker interface.
-----BEGIN PGP SIGNATURE-----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=xTZ8
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-mmu-6.13' of https://github.com/kvm-x86/linux into HEAD
KVM x86 MMU changes for 6.13
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code, improve
documentation, harden against unexpected changes, and to simplify
A/D-disabled MMUs by using the hardware-defined A/D bits to track if a
PFN is Accessed and/or Dirty.
- Elide TLB flushes when aging SPTEs, as has been done in x86's primary
MMU for over 10 years.
- Batch TLB flushes when zapping collapsible TDP MMU SPTEs, i.e. when
dirty logging is toggled off, which reduces the time it takes to disable
dirty logging by ~3x.
- Recover huge pages in-place in the TDP MMU instead of zapping the SP
and waiting until the page is re-accessed to create a huge mapping.
Proactively installing huge pages can reduce vCPU jitter in extreme
scenarios.
- Remove support for (poorly) reclaiming page tables in shadow MMUs via
the primary MMU's shrinker interface.
- Rework kvm_vcpu_on_spin() to use a single for-loop instead of making two
partial poasses over "all" vCPUs. Opportunistically expand the comment
to better explain the motivation and logic.
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock instead
of RCU, so that running a vCPU on a different task doesn't encounter
long stalls due to having to wait for all CPUs become quiescent.
-----BEGIN PGP SIGNATURE-----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=/hvr
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.13' of https://github.com/kvm-x86/linux into HEAD
KVM generic changes for 6.13
- Rework kvm_vcpu_on_spin() to use a single for-loop instead of making two
partial poasses over "all" vCPUs. Opportunistically expand the comment
to better explain the motivation and logic.
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock instead
of RCU, so that running a vCPU on a different task doesn't encounter
long stalls due to having to wait for all CPUs become quiescent.
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
-----BEGIN PGP SIGNATURE-----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=sI+4
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.13-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.13
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
in all of those failure exits prior to fdget() are plain returns and
the only thing done after fdput() is (on failure exits) a kfree(),
which can be done before fdput() just fine.
NOTE: in acrn_irqfd_assign() 'fail:' failure exit is wrong for
eventfd_ctx_fileget() failure (we only want fdput() there) and once
we stop doing that, it doesn't need to check if eventfd is NULL or
ERR_PTR(...) there.
NOTE: in privcmd we move fdget() up before the allocation - more
to the point, before the copy_from_user() attempt.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
all failure exits prior to fdget() leave the scope, all matching fdput()
are immediately followed by leaving the scope.
[xfs_ioc_commit_range() chunk moved here as well]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fdget() is the first thing done in scope, all matching fdput() are
immediately followed by leaving the scope.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a Kconfig to allow architectures to opt-out of a TLB flush when a
young page is aged, as invalidating TLB entries is not functionally
required on most KVM-supported architectures. Stale TLB entries can
result in false negatives and theoretically lead to suboptimal reclaim,
but in practice all observations have been that the performance gained by
skipping TLB flushes outweighs any performance lost by reclaiming hot
pages.
E.g. the primary MMUs for x86 RISC-V, s390, and PPC Book3S elide the TLB
flush for ptep_clear_flush_young(), and arm64's MMU skips the trailing DSB
that's required for ordering (presumably because there are optimizations
related to eliding other TLB flushes when doing make-before-break).
Link: https://lore.kernel.org/r/20241011021051.1557902-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
To avoid jitter on KVM_RUN due to synchronize_rcu(), use a rwlock instead
of RCU to protect vcpu->pid, a.k.a. the pid of the task last used to a
vCPU. When userspace is doing M:N scheduling of tasks to vCPUs, e.g. to
run SEV migration helper vCPUs during post-copy, the synchronize_rcu()
needed to change the PID associated with the vCPU can stall for hundreds
of milliseconds, which is problematic for latency sensitive post-copy
operations.
In the directed yield path, do not acquire the lock if it's contended,
i.e. if the associated PID is changing, as that means the vCPU's task is
already running.
Reported-by: Steve Rutherford <srutherford@google.com>
Reviewed-by: Steve Rutherford <srutherford@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240802200136.329973-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Do "return 0" instead of initializing and returning a local variable in
kvm_vcpu_yield_to(), e.g. so that it's more obvious what the function
returns if there is no task.
No functional change intended.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240802200136.329973-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rework kvm_vcpu_on_spin() to use a single for-loop instead of making "two"
passes over all vCPUs. Given N=kvm->last_boosted_vcpu, the logic is to
iterate from vCPU[N+1]..vcpu[N-1], i.e. using two loops is just a kludgy
way of handling the wrap from the last vCPU to vCPU0 when a boostable vCPU
isn't found in vcpu[N+1]..vcpu[MAX].
Open code the xa_load() instead of using kvm_get_vcpu() to avoid reading
online_vcpus in every loop, as well as the accompanying smp_rmb(), i.e.
make it a custom kvm_for_each_vcpu(), for all intents and purposes.
Oppurtunistically clean up the comment explaining the logic.
Link: https://lore.kernel.org/r/20240802202121.341348-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
'struct kvm_device_ops' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
2605 169 16 2790 ae6 virt/kvm/vfio.o
After:
=====
text data bss dec hex filename
2685 89 16 2790 ae6 virt/kvm/vfio.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e7361a1bb7defbb0f7056b884e83f8d75ac9fe21.1727517084.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that KVM no longer relies on an ugly heuristic to find its struct page
references, i.e. now that KVM can't get false positives on VM_MIXEDMAP
pfns, remove KVM's hack to elevate the refcount for pfns that happen to
have a valid struct page. In addition to removing a long-standing wart
in KVM, this allows KVM to map non-refcounted struct page memory into the
guest, e.g. for exposing GPU TTM buffers to KVM guests.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-86-seanjc@google.com>
Remove all kvm_{release,set}_pfn_*() APIs now that all users are gone.
No functional change intended.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-85-seanjc@google.com>
Now that the legacy gfn_to_pfn() APIs are gone, and all callers of
hva_to_pfn() pass in a refcounted_page pointer, make it a required field
to ensure all future usage in KVM plays nice.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-82-seanjc@google.com>
Drop gfn_to_pfn() and all its variants now that all users are gone.
No functional change intended.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-80-seanjc@google.com>
Rework gfn_to_page() to support read-only accesses so that it can be used
by arm64 to get MTE tags out of guest memory.
Opportunistically rewrite the comment to be even more stern about using
gfn_to_page(), as there are very few scenarios where requiring a struct
page is actually the right thing to do (though there are such scenarios).
Add a FIXME to call out that KVM probably should be pinning pages, not
just getting pages.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-77-seanjc@google.com>
Convert gfn_to_page() to the new kvm_follow_pfn() internal API, which will
eventually allow removing gfn_to_pfn() and kvm_pfn_to_refcounted_page().
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-76-seanjc@google.com>
Provide the "struct page" associated with a guest_memfd pfn as an output
from __kvm_gmem_get_pfn() so that KVM guest page fault handlers can
directly put the page instead of having to rely on
kvm_pfn_to_refcounted_page().
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-47-seanjc@google.com>
Refactor guest_memfd usage of __kvm_gmem_get_pfn() to pass the index into
the guest_memfd file instead of the gfn, i.e. resolve the index based on
the slot+gfn in the caller instead of in __kvm_gmem_get_pfn(). This will
allow kvm_gmem_get_pfn() to retrieve and return the specific "struct page",
which requires the index into the folio, without a redoing the index
calculation multiple times (which isn't costly, just hard to follow).
Opportunistically add a kvm_gmem_get_index() helper to make the copy+pasted
code easier to understand.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-46-seanjc@google.com>
Add a new dedicated API, kvm_faultin_pfn(), for servicing guest page
faults, i.e. for getting pages/pfns that will be mapped into the guest via
an mmu_notifier-protected KVM MMU. Keep struct kvm_follow_pfn buried in
internal code, as having __kvm_faultin_pfn() take "out" params is actually
cleaner for several architectures, e.g. it allows the caller to have its
own "page fault" structure without having to marshal data to/from
kvm_follow_pfn.
Long term, common KVM would ideally provide a kvm_page_fault structure, a
la x86's struct of the same name. But all architectures need to be
converted to a common API before that can happen.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-44-seanjc@google.com>
Add an off-by-default module param to control whether or not KVM is allowed
to map memory that isn't pinned, i.e. that KVM can't guarantee won't be
freed while it is mapped into KVM and/or the guest. Don't remove the
functionality entirely, as there are use cases where mapping unpinned
memory is safe (as defined by the platform owner), e.g. when memory is
hidden from the kernel and managed by userspace, in which case userspace
is already fully trusted to not muck with guest memory mappings.
But for more typical setups, mapping unpinned memory is wildly unsafe, and
unnecessary. The APIs are used exclusively by x86's nested virtualization
support, and there is no known (or sane) use case for mapping PFN-mapped
memory a KVM guest _and_ letting the guest use it for virtualization
structures.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-36-seanjc@google.com>
When creating a memory map for read, don't request a writable pfn from the
primary MMU. While creating read-only mappings can be theoretically slower,
as they don't play nice with fast GUP due to the need to break CoW before
mapping the underlying PFN, practically speaking, creating a mapping isn't
a super hot path, and getting a writable mapping for reading is weird and
confusing.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-35-seanjc@google.com>
Now that all kvm_vcpu_{,un}map() users pass "true" for @dirty, have them
pass "true" as a @writable param to kvm_vcpu_map(), and thus create a
read-only mapping when possible.
Note, creating read-only mappings can be theoretically slower, as they
don't play nice with fast GUP due to the need to break CoW before mapping
the underlying PFN. But practically speaking, creating a mapping isn't
a super hot path, and getting a writable mapping for reading is weird and
confusing.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-34-seanjc@google.com>
Pin, as in FOLL_PIN, pages when mapping them for direct access by KVM.
As per Documentation/core-api/pin_user_pages.rst, writing to a page that
was gotten via FOLL_GET is explicitly disallowed.
Correct (uses FOLL_PIN calls):
pin_user_pages()
write to the data within the pages
unpin_user_pages()
INCORRECT (uses FOLL_GET calls):
get_user_pages()
write to the data within the pages
put_page()
Unfortunately, FOLL_PIN is a "private" flag, and so kvm_follow_pfn must
use a one-off bool instead of being able to piggyback the "flags" field.
Link: https://lwn.net/Articles/930667
Link: https://lore.kernel.org/all/cover.1683044162.git.lstoakes@gmail.com
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-32-seanjc@google.com>
Migrate kvm_vcpu_map() to kvm_follow_pfn(), and have it track whether or
not the map holds a refcounted struct page. Precisely tracking struct
page references will eventually allow removing kvm_pfn_to_refcounted_page()
and its various wrappers.
Signed-off-by: David Stevens <stevensd@chromium.org>
[sean: use a pointer instead of a boolean]
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-31-seanjc@google.com>
Track refcounted struct page memory using kvm_follow_pfn.refcounted_page
instead of relying on kvm_release_pfn_clean() to correctly detect that the
pfn is associated with a struct page.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-30-seanjc@google.com>
Hoist the kvm_{set,release}_page_{clean,dirty}() APIs further up in
kvm_main.c so that they can be used by the kvm_follow_pfn family of APIs.
No functional change intended.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-29-seanjc@google.com>
Add kvm_follow_pfn.refcounted_page as an output for the "to pfn" APIs to
"return" the struct page that is associated with the returned pfn (if KVM
acquired a reference to the page). This will eventually allow removing
KVM's hacky kvm_pfn_to_refcounted_page() code, which is error prone and
can't detect pfns that are valid, but aren't (currently) refcounted.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-28-seanjc@google.com>
Use a single pointer instead of a single-entry array for the struct page
pointer in hva_to_pfn_fast(). Using an array makes the code unnecessarily
annoying to read and update.
No functional change intended.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-27-seanjc@google.com>
Drop yet another unnecessary magic page value from KVM, as there's zero
reason to use a poisoned pointer to indicate "no page". If KVM uses a
NULL page pointer, the kernel will explode just as quickly as if KVM uses
a poisoned pointer. Never mind the fact that such usage would be a
blatant and egregious KVM bug.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-23-seanjc@google.com>
Explicitly initialize the entire kvm_host_map structure when mapping a
pfn, as some callers declare their struct on the stack, i.e. don't
zero-initialize the struct, which makes the map->hva in kvm_vcpu_unmap()
*very* suspect.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-22-seanjc@google.com>
Drop kvm_vcpu_{,un}map()'s useless checks on @map being non-NULL. The map
is 100% kernel controlled, any caller that passes a NULL pointer is broken
and needs to be fixed, i.e. a crash due to a NULL pointer dereference is
desirable (though obviously not as desirable as not having a bug in the
first place).
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-21-seanjc@google.com>
Introduce kvm_follow_pfn() to eventually supplant the various "gfn_to_pfn"
APIs, albeit by adding more wrappers. The primary motivation of the new
helper is to pass a structure instead of an ever changing set of parameters,
e.g. so that tweaking the behavior, inputs, and/or outputs of the "to pfn"
helpers doesn't require churning half of KVM.
In the more distant future, the APIs exposed to arch code could also
follow suit, e.g. by adding something akin to x86's "struct kvm_page_fault"
when faulting in guest memory. But for now, the goal is purely to clean
up KVM's "internal" MMU code.
As part of the conversion, replace the write_fault, interruptible, and
no-wait boolean flags with FOLL_WRITE, FOLL_INTERRUPTIBLE, and FOLL_NOWAIT
respectively. Collecting the various FOLL_* flags into a single field
will again ease the pain of passing new flags.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Stevens <stevensd@chromium.org>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-20-seanjc@google.com>
Drop @hva from __gfn_to_pfn_memslot() now that all callers pass NULL.
No functional change intended.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-19-seanjc@google.com>
Add a pfn error code to communicate that hva_to_pfn() failed because I/O
was needed and disallowed, and convert @async to a constant @no_wait
boolean. This will allow eliminating the @no_wait param by having callers
pass in FOLL_NOWAIT along with other FOLL_* flags.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Stevens <stevensd@chromium.org>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-17-seanjc@google.com>
Remove check_user_page_hwpoison() as it's effectively dead code. Prior to
commit 234b239bea ("kvm: Faults which trigger IO release the mmap_sem"),
hva_to_pfn_slow() wasn't actually a slow path in all cases, i.e. would do
get_user_pages_fast() without ever doing slow GUP with FOLL_HWPOISON.
Now that hva_to_pfn_slow() is a straight shot to get_user_pages_unlocked(),
and unconditionally passes FOLL_HWPOISON, it is impossible for hva_to_pfn()
to get an -errno that needs to be morphed to -EHWPOISON.
There are essentially four cases in KVM:
- npages == 0, then FOLL_NOWAIT, a.k.a. @async, must be true, and thus
check_user_page_hwpoison() will not be called
- npages == 1 || npages == -EHWPOISON, all good
- npages == -EINTR || npages == -EAGAIN, bail early, all good
- everything else, including -EFAULT, can go down the vma_lookup() path,
as npages < 0 means KVM went through hva_to_pfn_slow() which passes
FOLL_HWPOISON
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-16-seanjc@google.com>
Treat an -EAGAIN return from GUP the same as -EINTR and immediately report
to the caller that a signal is pending. GUP only returns -EAGAIN if
the _initial_ mmap_read_lock_killable() fails, which in turn onnly fails
if a signal is pending
Note, rwsem_down_read_slowpath() actually returns -EINTR, so GUP is really
just making life harder than it needs to be. And the call to
mmap_read_lock_killable() in the retry path returns its -errno verbatim,
i.e. GUP (and thus KVM) is already handling locking failure this way, but
only some of the time.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-15-seanjc@google.com>
Now that hva_to_pfn() no longer supports being called in atomic context,
move the might_sleep() annotation from hva_to_pfn_slow() to hva_to_pfn().
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-14-seanjc@google.com>
Drop @atomic from the myriad "to_pfn" APIs now that all callers pass
"false", and remove a comment blurb about KVM running only the "GUP fast"
part in atomic context.
No functional change intended.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-13-seanjc@google.com>
Rename gfn_to_page_many_atomic() to kvm_prefetch_pages() to try and
communicate its true purpose, as the "atomic" aspect is essentially a
side effect of the fact that x86 uses the API while holding mmu_lock.
E.g. even if mmu_lock weren't held, KVM wouldn't want to fault-in pages,
as the goal is to opportunistically grab surrounding pages that have
already been accessed and/or dirtied by the host, and to do so quickly.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-12-seanjc@google.com>
Allow passing a NULL @page to kvm_release_page_{clean,dirty}(), there's no
tangible benefit to forcing the callers to pre-check @page, and it ends up
generating a lot of duplicate boilerplate code.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-3-seanjc@google.com>
Remove KVM_ERR_PTR_BAD_PAGE and instead return NULL, as "bad page" is just
a leftover bit of weirdness from days of old when KVM stuffed a "bad" page
into the guest instead of actually handling missing pages. See commit
cea7bb2128 ("KVM: MMU: Make gfn_to_page() always safe").
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-2-seanjc@google.com>
* Fix the guest view of the ID registers, making the relevant fields
writable from userspace (affecting ID_AA64DFR0_EL1 and ID_AA64PFR1_EL1)
* Correcly expose S1PIE to guests, fixing a regression introduced
in 6.12-rc1 with the S1POE support
* Fix the recycling of stage-2 shadow MMUs by tracking the context
(are we allowed to block or not) as well as the recycling state
* Address a couple of issues with the vgic when userspace misconfigures
the emulation, resulting in various splats. Headaches courtesy
of our Syzkaller friends
* Stop wasting space in the HYP idmap, as we are dangerously close
to the 4kB limit, and this has already exploded in -next
* Fix another race in vgic_init()
* Fix a UBSAN error when faking the cache topology with MTE
enabled
RISCV:
* RISCV: KVM: use raw_spinlock for critical section in imsic
x86:
* A bandaid for lack of XCR0 setup in selftests, which causes trouble
if the compiler is configured to have x86-64-v3 (with AVX) as the
default ISA. Proper XCR0 setup will come in the next merge window.
* Fix an issue where KVM would not ignore low bits of the nested CR3
and potentially leak up to 31 bytes out of the guest memory's bounds
* Fix case in which an out-of-date cached value for the segments could
by returned by KVM_GET_SREGS.
* More cleanups for KVM_X86_QUIRK_SLOT_ZAP_ALL
* Override MTRR state for KVM confidential guests, making it WB by
default as is already the case for Hyper-V guests.
Generic:
* Remove a couple of unused functions
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcVK54UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOfrgf7BRyihd28OGaqVuv2BqGYrxqfOkd6
ZqpJDOy+X7UE3iG5NhTxw4mghCJFhOwIL7gDSZwPLe6D2k01oqPSP2pLMqXb5oOv
/EkltRvzG0YIH3sjZY5PROrMMxnvSKkJKxETFxFQQzMKRym2v/T5LAzrium58YIT
vWZXxo2HTPXOw/U5upAqqMYJMeeJEL3kurVHtOsPytUFjrIOl0BfeKvgjOwonDIh
Awm4JZwk0+1d8sYfkuzsSrTQmtshDCx1jkFN1juirt90s1EwgmOvVKiHo3gMsVP9
veDRoLTx2fM/r7TrhoHo46DTA2vbfmCltWcT0cn5x8P24BFGXXe/IDJIHA==
=IVlI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix the guest view of the ID registers, making the relevant fields
writable from userspace (affecting ID_AA64DFR0_EL1 and
ID_AA64PFR1_EL1)
- Correcly expose S1PIE to guests, fixing a regression introduced in
6.12-rc1 with the S1POE support
- Fix the recycling of stage-2 shadow MMUs by tracking the context
(are we allowed to block or not) as well as the recycling state
- Address a couple of issues with the vgic when userspace
misconfigures the emulation, resulting in various splats. Headaches
courtesy of our Syzkaller friends
- Stop wasting space in the HYP idmap, as we are dangerously close to
the 4kB limit, and this has already exploded in -next
- Fix another race in vgic_init()
- Fix a UBSAN error when faking the cache topology with MTE enabled
RISCV:
- RISCV: KVM: use raw_spinlock for critical section in imsic
x86:
- A bandaid for lack of XCR0 setup in selftests, which causes trouble
if the compiler is configured to have x86-64-v3 (with AVX) as the
default ISA. Proper XCR0 setup will come in the next merge window.
- Fix an issue where KVM would not ignore low bits of the nested CR3
and potentially leak up to 31 bytes out of the guest memory's
bounds
- Fix case in which an out-of-date cached value for the segments
could by returned by KVM_GET_SREGS.
- More cleanups for KVM_X86_QUIRK_SLOT_ZAP_ALL
- Override MTRR state for KVM confidential guests, making it WB by
default as is already the case for Hyper-V guests.
Generic:
- Remove a couple of unused functions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (27 commits)
RISCV: KVM: use raw_spinlock for critical section in imsic
KVM: selftests: Fix out-of-bounds reads in CPUID test's array lookups
KVM: selftests: x86: Avoid using SSE/AVX instructions
KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory
KVM: VMX: reset the segment cache after segment init in vmx_vcpu_reset()
KVM: x86: Clean up documentation for KVM_X86_QUIRK_SLOT_ZAP_ALL
KVM: x86/mmu: Add lockdep assert to enforce safe usage of kvm_unmap_gfn_range()
KVM: x86/mmu: Zap only SPs that shadow gPTEs when deleting memslot
x86/kvm: Override default caching mode for SEV-SNP and TDX
KVM: Remove unused kvm_vcpu_gfn_to_pfn_atomic
KVM: Remove unused kvm_vcpu_gfn_to_pfn
KVM: arm64: Ensure vgic_ready() is ordered against MMIO registration
KVM: arm64: vgic: Don't check for vgic_ready() when setting NR_IRQS
KVM: arm64: Fix shift-out-of-bounds bug
KVM: arm64: Shave a few bytes from the EL2 idmap code
KVM: arm64: Don't eagerly teardown the vgic on init error
KVM: arm64: Expose S1PIE to guests
KVM: arm64: nv: Clarify safety of allowing TLBI unmaps to reschedule
KVM: arm64: nv: Punt stage-2 recycling to a vCPU request
KVM: arm64: nv: Do not block when unmapping stage-2 if disallowed
...
