mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
synced 2024-12-29 09:12:07 +00:00
54234e3a69
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/phy/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in several files.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241009065307.504930-2-u.kleine-koenig@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
271 lines
7.9 KiB
C
271 lines
7.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2014, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/time.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/phy/phy.h>
|
|
|
|
/* PHY registers */
|
|
#define UNIPHY_PLL_REFCLK_CFG 0x000
|
|
#define UNIPHY_PLL_PWRGEN_CFG 0x014
|
|
#define UNIPHY_PLL_GLB_CFG 0x020
|
|
#define UNIPHY_PLL_SDM_CFG0 0x038
|
|
#define UNIPHY_PLL_SDM_CFG1 0x03C
|
|
#define UNIPHY_PLL_SDM_CFG2 0x040
|
|
#define UNIPHY_PLL_SDM_CFG3 0x044
|
|
#define UNIPHY_PLL_SDM_CFG4 0x048
|
|
#define UNIPHY_PLL_SSC_CFG0 0x04C
|
|
#define UNIPHY_PLL_SSC_CFG1 0x050
|
|
#define UNIPHY_PLL_SSC_CFG2 0x054
|
|
#define UNIPHY_PLL_SSC_CFG3 0x058
|
|
#define UNIPHY_PLL_LKDET_CFG0 0x05C
|
|
#define UNIPHY_PLL_LKDET_CFG1 0x060
|
|
#define UNIPHY_PLL_LKDET_CFG2 0x064
|
|
#define UNIPHY_PLL_CAL_CFG0 0x06C
|
|
#define UNIPHY_PLL_CAL_CFG8 0x08C
|
|
#define UNIPHY_PLL_CAL_CFG9 0x090
|
|
#define UNIPHY_PLL_CAL_CFG10 0x094
|
|
#define UNIPHY_PLL_CAL_CFG11 0x098
|
|
#define UNIPHY_PLL_STATUS 0x0C0
|
|
|
|
#define SATA_PHY_SER_CTRL 0x100
|
|
#define SATA_PHY_TX_DRIV_CTRL0 0x104
|
|
#define SATA_PHY_TX_DRIV_CTRL1 0x108
|
|
#define SATA_PHY_TX_IMCAL0 0x11C
|
|
#define SATA_PHY_TX_IMCAL2 0x124
|
|
#define SATA_PHY_RX_IMCAL0 0x128
|
|
#define SATA_PHY_EQUAL 0x13C
|
|
#define SATA_PHY_OOB_TERM 0x144
|
|
#define SATA_PHY_CDR_CTRL0 0x148
|
|
#define SATA_PHY_CDR_CTRL1 0x14C
|
|
#define SATA_PHY_CDR_CTRL2 0x150
|
|
#define SATA_PHY_CDR_CTRL3 0x154
|
|
#define SATA_PHY_PI_CTRL0 0x168
|
|
#define SATA_PHY_POW_DWN_CTRL0 0x180
|
|
#define SATA_PHY_POW_DWN_CTRL1 0x184
|
|
#define SATA_PHY_TX_DATA_CTRL 0x188
|
|
#define SATA_PHY_ALIGNP 0x1A4
|
|
#define SATA_PHY_TX_IMCAL_STAT 0x1E4
|
|
#define SATA_PHY_RX_IMCAL_STAT 0x1E8
|
|
|
|
#define UNIPHY_PLL_LOCK BIT(0)
|
|
#define SATA_PHY_TX_CAL BIT(0)
|
|
#define SATA_PHY_RX_CAL BIT(0)
|
|
|
|
/* default timeout set to 1 sec */
|
|
#define TIMEOUT_MS 10000
|
|
#define DELAY_INTERVAL_US 100
|
|
|
|
struct qcom_apq8064_sata_phy {
|
|
void __iomem *mmio;
|
|
struct clk *cfg_clk;
|
|
struct device *dev;
|
|
};
|
|
|
|
/* Helper function to do poll and timeout */
|
|
static int poll_timeout(void __iomem *addr, u32 mask)
|
|
{
|
|
u32 val;
|
|
|
|
return readl_relaxed_poll_timeout(addr, val, (val & mask),
|
|
DELAY_INTERVAL_US, TIMEOUT_MS * 1000);
|
|
}
|
|
|
|
static int qcom_apq8064_sata_phy_init(struct phy *generic_phy)
|
|
{
|
|
struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
|
|
void __iomem *base = phy->mmio;
|
|
int ret = 0;
|
|
|
|
/* SATA phy initialization */
|
|
writel_relaxed(0x01, base + SATA_PHY_SER_CTRL);
|
|
writel_relaxed(0xB1, base + SATA_PHY_POW_DWN_CTRL0);
|
|
/* Make sure the power down happens before power up */
|
|
mb();
|
|
usleep_range(10, 60);
|
|
|
|
writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);
|
|
writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
|
|
writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
|
|
writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);
|
|
writel_relaxed(0x02, base + SATA_PHY_TX_IMCAL2);
|
|
|
|
/* Write UNIPHYPLL registers to configure PLL */
|
|
writel_relaxed(0x04, base + UNIPHY_PLL_REFCLK_CFG);
|
|
writel_relaxed(0x00, base + UNIPHY_PLL_PWRGEN_CFG);
|
|
|
|
writel_relaxed(0x0A, base + UNIPHY_PLL_CAL_CFG0);
|
|
writel_relaxed(0xF3, base + UNIPHY_PLL_CAL_CFG8);
|
|
writel_relaxed(0x01, base + UNIPHY_PLL_CAL_CFG9);
|
|
writel_relaxed(0xED, base + UNIPHY_PLL_CAL_CFG10);
|
|
writel_relaxed(0x02, base + UNIPHY_PLL_CAL_CFG11);
|
|
|
|
writel_relaxed(0x36, base + UNIPHY_PLL_SDM_CFG0);
|
|
writel_relaxed(0x0D, base + UNIPHY_PLL_SDM_CFG1);
|
|
writel_relaxed(0xA3, base + UNIPHY_PLL_SDM_CFG2);
|
|
writel_relaxed(0xF0, base + UNIPHY_PLL_SDM_CFG3);
|
|
writel_relaxed(0x00, base + UNIPHY_PLL_SDM_CFG4);
|
|
|
|
writel_relaxed(0x19, base + UNIPHY_PLL_SSC_CFG0);
|
|
writel_relaxed(0xE1, base + UNIPHY_PLL_SSC_CFG1);
|
|
writel_relaxed(0x00, base + UNIPHY_PLL_SSC_CFG2);
|
|
writel_relaxed(0x11, base + UNIPHY_PLL_SSC_CFG3);
|
|
|
|
writel_relaxed(0x04, base + UNIPHY_PLL_LKDET_CFG0);
|
|
writel_relaxed(0xFF, base + UNIPHY_PLL_LKDET_CFG1);
|
|
|
|
writel_relaxed(0x02, base + UNIPHY_PLL_GLB_CFG);
|
|
/* make sure global config LDO power down happens before power up */
|
|
mb();
|
|
|
|
writel_relaxed(0x03, base + UNIPHY_PLL_GLB_CFG);
|
|
writel_relaxed(0x05, base + UNIPHY_PLL_LKDET_CFG2);
|
|
|
|
/* PLL Lock wait */
|
|
ret = poll_timeout(base + UNIPHY_PLL_STATUS, UNIPHY_PLL_LOCK);
|
|
if (ret) {
|
|
dev_err(phy->dev, "poll timeout UNIPHY_PLL_STATUS\n");
|
|
return ret;
|
|
}
|
|
|
|
/* TX Calibration */
|
|
ret = poll_timeout(base + SATA_PHY_TX_IMCAL_STAT, SATA_PHY_TX_CAL);
|
|
if (ret) {
|
|
dev_err(phy->dev, "poll timeout SATA_PHY_TX_IMCAL_STAT\n");
|
|
return ret;
|
|
}
|
|
|
|
/* RX Calibration */
|
|
ret = poll_timeout(base + SATA_PHY_RX_IMCAL_STAT, SATA_PHY_RX_CAL);
|
|
if (ret) {
|
|
dev_err(phy->dev, "poll timeout SATA_PHY_RX_IMCAL_STAT\n");
|
|
return ret;
|
|
}
|
|
|
|
/* SATA phy calibrated successfully, power up to functional mode */
|
|
writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
|
|
writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
|
|
writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);
|
|
|
|
writel_relaxed(0x00, base + SATA_PHY_POW_DWN_CTRL1);
|
|
writel_relaxed(0x59, base + SATA_PHY_CDR_CTRL0);
|
|
writel_relaxed(0x04, base + SATA_PHY_CDR_CTRL1);
|
|
writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL2);
|
|
writel_relaxed(0x00, base + SATA_PHY_PI_CTRL0);
|
|
writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL3);
|
|
writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);
|
|
|
|
writel_relaxed(0x11, base + SATA_PHY_TX_DATA_CTRL);
|
|
writel_relaxed(0x43, base + SATA_PHY_ALIGNP);
|
|
writel_relaxed(0x04, base + SATA_PHY_OOB_TERM);
|
|
|
|
writel_relaxed(0x01, base + SATA_PHY_EQUAL);
|
|
writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL0);
|
|
writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qcom_apq8064_sata_phy_exit(struct phy *generic_phy)
|
|
{
|
|
struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
|
|
void __iomem *base = phy->mmio;
|
|
|
|
/* Power down PHY */
|
|
writel_relaxed(0xF8, base + SATA_PHY_POW_DWN_CTRL0);
|
|
writel_relaxed(0xFE, base + SATA_PHY_POW_DWN_CTRL1);
|
|
|
|
/* Power down PLL block */
|
|
writel_relaxed(0x00, base + UNIPHY_PLL_GLB_CFG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops qcom_apq8064_sata_phy_ops = {
|
|
.init = qcom_apq8064_sata_phy_init,
|
|
.exit = qcom_apq8064_sata_phy_exit,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int qcom_apq8064_sata_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct qcom_apq8064_sata_phy *phy;
|
|
struct device *dev = &pdev->dev;
|
|
struct phy_provider *phy_provider;
|
|
struct phy *generic_phy;
|
|
int ret;
|
|
|
|
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
|
if (!phy)
|
|
return -ENOMEM;
|
|
|
|
phy->mmio = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(phy->mmio))
|
|
return PTR_ERR(phy->mmio);
|
|
|
|
generic_phy = devm_phy_create(dev, NULL, &qcom_apq8064_sata_phy_ops);
|
|
if (IS_ERR(generic_phy)) {
|
|
dev_err(dev, "%s: failed to create phy\n", __func__);
|
|
return PTR_ERR(generic_phy);
|
|
}
|
|
|
|
phy->dev = dev;
|
|
phy_set_drvdata(generic_phy, phy);
|
|
platform_set_drvdata(pdev, phy);
|
|
|
|
phy->cfg_clk = devm_clk_get(dev, "cfg");
|
|
if (IS_ERR(phy->cfg_clk)) {
|
|
dev_err(dev, "Failed to get sata cfg clock\n");
|
|
return PTR_ERR(phy->cfg_clk);
|
|
}
|
|
|
|
ret = clk_prepare_enable(phy->cfg_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
if (IS_ERR(phy_provider)) {
|
|
clk_disable_unprepare(phy->cfg_clk);
|
|
dev_err(dev, "%s: failed to register phy\n", __func__);
|
|
return PTR_ERR(phy_provider);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qcom_apq8064_sata_phy_remove(struct platform_device *pdev)
|
|
{
|
|
struct qcom_apq8064_sata_phy *phy = platform_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(phy->cfg_clk);
|
|
}
|
|
|
|
static const struct of_device_id qcom_apq8064_sata_phy_of_match[] = {
|
|
{ .compatible = "qcom,apq8064-sata-phy" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, qcom_apq8064_sata_phy_of_match);
|
|
|
|
static struct platform_driver qcom_apq8064_sata_phy_driver = {
|
|
.probe = qcom_apq8064_sata_phy_probe,
|
|
.remove = qcom_apq8064_sata_phy_remove,
|
|
.driver = {
|
|
.name = "qcom-apq8064-sata-phy",
|
|
.of_match_table = qcom_apq8064_sata_phy_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(qcom_apq8064_sata_phy_driver);
|
|
|
|
MODULE_DESCRIPTION("QCOM apq8064 SATA PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|