Kernel/linux-next
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git synced 2024-12-28 16:52:18 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
master
linux-next/drivers/regulator/rt6190-regulator.c
Uwe Kleine-König 964e186547
regulator: Switch i2c drivers back to use .probe() 
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Link: https://lore.kernel.org/r/20230505220218.1239542-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-08 08:50:11 +09:00

497 lines
12 KiB
C
Raw Permalink Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2022 Richtek Technology Corp.
*
* Author: ChiYuan Huang <cy_huang@richtek.com>
*
*/
#include <linux/bits.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
#define RT6190_REG_VID 0x00
#define RT6190_REG_OUTV 0x01
#define RT6190_REG_OUTC 0x03
#define RT6190_REG_SET1 0x0D
#define RT6190_REG_SET2 0x0E
#define RT6190_REG_SET4 0x10
#define RT6190_REG_RATIO 0x11
#define RT6190_REG_OUT_VOLT_L 0x12
#define RT6190_REG_TEMP_H 0x1B
#define RT6190_REG_STAT1 0x1C
#define RT6190_REG_ALERT1 0x1E
#define RT6190_REG_ALERT2 0x1F
#define RT6190_REG_MASK2 0x21
#define RT6190_REG_OCPEN 0x28
#define RT6190_REG_SET5 0x29
#define RT6190_REG_VBUSC_ADC 0x32
#define RT6190_REG_BUSC_VOLT_L 0x33
#define RT6190_REG_BUSC_VOLT_H 0x34
#define RT6190_REG_STAT3 0x37
#define RT6190_REG_ALERT3 0x38
#define RT6190_REG_MASK3 0x39
#define RT6190_ENPWM_MASK BIT(7)
#define RT6190_ENDCHG_MASK BIT(4)
#define RT6190_ALERT_OTPEVT BIT(6)
#define RT6190_ALERT_UVPEVT BIT(5)
#define RT6190_ALERT_OVPEVT BIT(4)
#define RT6190_ENGCP_MASK BIT(1)
#define RT6190_FCCM_MASK BIT(7)
#define RICHTEK_VID 0x82
#define RT6190_OUT_MIN_UV 3000000
#define RT6190_OUT_MAX_UV 32000000
#define RT6190_OUT_STEP_UV 20000
#define RT6190_OUT_N_VOLT (RT6190_OUT_MAX_UV / RT6190_OUT_STEP_UV + 1)
#define RT6190_OUTV_MINSEL 150
#define RT6190_OUT_MIN_UA 306000
#define RT6190_OUT_MAX_UA 12114000
#define RT6190_OUT_STEP_UA 24000
#define RT6190_OUTC_MINSEL 19
#define RT6190_EN_TIME_US 500
#define RT6190_PSM_MODE 0
#define RT6190_FCCM_MODE 1
struct rt6190_data {
struct device *dev;
struct regmap *regmap;
struct gpio_desc *enable_gpio;
unsigned int cached_alert_evt;
};
static int rt6190_out_set_voltage_sel(struct regulator_dev *rdev,
unsigned int selector)
{
struct regmap *regmap = rdev_get_regmap(rdev);
__le16 le_sel = cpu_to_le16(selector);
return regmap_raw_write(regmap, RT6190_REG_OUTV, &le_sel,
sizeof(le_sel));
}
static int rt6190_out_get_voltage_sel(struct regulator_dev *rdev)
{
struct regmap *regmap = rdev_get_regmap(rdev);
__le16 le_sel;
int ret;
ret = regmap_raw_read(regmap, RT6190_REG_OUTV, &le_sel, sizeof(le_sel));
return ret ?: le16_to_cpu(le_sel);
}
static int rt6190_out_enable(struct regulator_dev *rdev)
{
struct rt6190_data *data = rdev_get_drvdata(rdev);
struct regmap *regmap = rdev_get_regmap(rdev);
u8 out_cfg[4];
int ret;
pm_runtime_get_sync(data->dev);
/*
* From off to on, vout config will restore to IC default.
* Read vout configs before enable, and restore them after enable
*/
ret = regmap_raw_read(regmap, RT6190_REG_OUTV, out_cfg,
sizeof(out_cfg));
if (ret)
return ret;
ret = regulator_enable_regmap(rdev);
if (ret)
return ret;
ret = regmap_raw_write(regmap, RT6190_REG_OUTV, out_cfg,
sizeof(out_cfg));
if (ret)
return ret;
return regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK,
RT6190_ENGCP_MASK);
}
static int rt6190_out_disable(struct regulator_dev *rdev)
{
struct rt6190_data *data = rdev_get_drvdata(rdev);
struct regmap *regmap = rdev_get_regmap(rdev);
int ret;
ret = regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK, 0);
if (ret)
return ret;
ret = regulator_disable_regmap(rdev);
if (ret)
return ret;
/* cleared cached alert event */
data->cached_alert_evt = 0;
pm_runtime_put(data->dev);
return 0;
}
static int rt6190_out_set_current_limit(struct regulator_dev *rdev, int min_uA,
int max_uA)
{
struct regmap *regmap = rdev_get_regmap(rdev);
int csel, clim;
__le16 le_csel;
if (min_uA < RT6190_OUT_MIN_UA || max_uA > RT6190_OUT_MAX_UA)
return -EINVAL;
csel = DIV_ROUND_UP(min_uA - RT6190_OUT_MIN_UA, RT6190_OUT_STEP_UA);
clim = RT6190_OUT_MIN_UA + RT6190_OUT_STEP_UA * csel;
if (clim > max_uA)
return -EINVAL;
csel += RT6190_OUTC_MINSEL;
le_csel = cpu_to_le16(csel);
return regmap_raw_write(regmap, RT6190_REG_OUTC, &le_csel,
sizeof(le_csel));
}
static int rt6190_out_get_current_limit(struct regulator_dev *rdev)
{
struct regmap *regmap = rdev_get_regmap(rdev);
__le16 le_csel;
int csel, ret;
ret = regmap_raw_read(regmap, RT6190_REG_OUTC, &le_csel,
sizeof(le_csel));
if (ret)
return ret;
csel = le16_to_cpu(le_csel);
csel -= RT6190_OUTC_MINSEL;
return RT6190_OUT_MIN_UA + RT6190_OUT_STEP_UA * csel;
}
static int rt6190_out_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct regmap *regmap = rdev_get_regmap(rdev);
unsigned int val;
switch (mode) {
case REGULATOR_MODE_FAST:
val = RT6190_FCCM_MASK;
break;
case REGULATOR_MODE_NORMAL:
val = 0;
break;
default:
return -EINVAL;
}
return regmap_update_bits(regmap, RT6190_REG_SET1, RT6190_FCCM_MASK,
val);
}
static unsigned int rt6190_out_get_mode(struct regulator_dev *rdev)
{
struct regmap *regmap = rdev_get_regmap(rdev);
unsigned int config;
int ret;
ret = regmap_read(regmap, RT6190_REG_SET1, &config);
if (ret)
return REGULATOR_MODE_INVALID;
if (config & RT6190_FCCM_MASK)
return REGULATOR_MODE_FAST;
return REGULATOR_MODE_NORMAL;
}
static int rt6190_out_get_error_flags(struct regulator_dev *rdev,
unsigned int *flags)
{
struct rt6190_data *data = rdev_get_drvdata(rdev);
unsigned int state, rpt_flags = 0;
int ret;
ret = regmap_read(data->regmap, RT6190_REG_STAT1, &state);
if (ret)
return ret;
state |= data->cached_alert_evt;
if (state & RT6190_ALERT_OTPEVT)
rpt_flags |= REGULATOR_ERROR_OVER_TEMP;
if (state & RT6190_ALERT_UVPEVT)
rpt_flags |= REGULATOR_ERROR_UNDER_VOLTAGE;
if (state & RT6190_ALERT_OVPEVT)
rpt_flags |= REGULATOR_ERROR_REGULATION_OUT;
*flags = rpt_flags;
return 0;
}
static unsigned int rt6190_out_of_map_mode(unsigned int mode)
{
switch (mode) {
case RT6190_PSM_MODE:
return REGULATOR_MODE_NORMAL;
case RT6190_FCCM_MODE:
return REGULATOR_MODE_FAST;
default:
return REGULATOR_MODE_INVALID;
}
}
static const struct regulator_ops rt6190_regulator_ops = {
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = rt6190_out_set_voltage_sel,
.get_voltage_sel = rt6190_out_get_voltage_sel,
.enable = rt6190_out_enable,
.disable = rt6190_out_disable,
.is_enabled = regulator_is_enabled_regmap,
.set_current_limit = rt6190_out_set_current_limit,
.get_current_limit = rt6190_out_get_current_limit,
.set_active_discharge = regulator_set_active_discharge_regmap,
.set_mode = rt6190_out_set_mode,
.get_mode = rt6190_out_get_mode,
.get_error_flags = rt6190_out_get_error_flags,
};
static const struct regulator_desc rt6190_regulator_desc = {
.name = "rt6190-regulator",
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.ops = &rt6190_regulator_ops,
.min_uV = RT6190_OUT_MIN_UV,
.uV_step = RT6190_OUT_STEP_UV,
.n_voltages = RT6190_OUT_N_VOLT,
.linear_min_sel = RT6190_OUTV_MINSEL,
.enable_reg = RT6190_REG_SET2,
.enable_mask = RT6190_ENPWM_MASK,
.active_discharge_reg = RT6190_REG_SET2,
.active_discharge_mask = RT6190_ENDCHG_MASK,
.active_discharge_on = RT6190_ENDCHG_MASK,
.of_map_mode = rt6190_out_of_map_mode,
};
static bool rt6190_is_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case RT6190_REG_OUT_VOLT_L ... RT6190_REG_ALERT2:
case RT6190_REG_BUSC_VOLT_L ... RT6190_REG_BUSC_VOLT_H:
case RT6190_REG_STAT3 ... RT6190_REG_ALERT3:
return true;
default:
return false;
}
}
static const struct regmap_config rt6190_regmap_config = {
.name = "rt6190",
.cache_type = REGCACHE_FLAT,
.reg_bits = 8,
.val_bits = 8,
.max_register = RT6190_REG_MASK3,
.num_reg_defaults_raw = RT6190_REG_MASK3 + 1,
.volatile_reg = rt6190_is_volatile_reg,
};
static irqreturn_t rt6190_irq_handler(int irq, void *devid)
{
struct regulator_dev *rdev = devid;
struct rt6190_data *data = rdev_get_drvdata(rdev);
unsigned int alert;
int ret;
ret = regmap_read(data->regmap, RT6190_REG_ALERT1, &alert);
if (ret)
return IRQ_NONE;
/* Write clear alert events */
ret = regmap_write(data->regmap, RT6190_REG_ALERT1, alert);
if (ret)
return IRQ_NONE;
data->cached_alert_evt |= alert;
if (alert & RT6190_ALERT_OTPEVT)
regulator_notifier_call_chain(rdev, REGULATOR_EVENT_OVER_TEMP, NULL);
if (alert & RT6190_ALERT_UVPEVT)
regulator_notifier_call_chain(rdev, REGULATOR_EVENT_UNDER_VOLTAGE, NULL);
if (alert & RT6190_ALERT_OVPEVT)
regulator_notifier_call_chain(rdev, REGULATOR_EVENT_REGULATION_OUT, NULL);
return IRQ_HANDLED;
}
static int rt6190_init_registers(struct regmap *regmap)
{
int ret;
/* Enable_ADC = 1 */
ret = regmap_write(regmap, RT6190_REG_SET4, 0x82);
if (ret)
return ret;
/* Config default VOUT ratio to be higher */
ret = regmap_write(regmap, RT6190_REG_RATIO, 0x20);
/* Mask unused alert */
ret = regmap_write(regmap, RT6190_REG_MASK2, 0);
if (ret)
return ret;
/* OCP config */
ret = regmap_write(regmap, RT6190_REG_OCPEN, 0);
if (ret)
return ret;
/* Enable VBUSC ADC */
return regmap_write(regmap, RT6190_REG_VBUSC_ADC, 0x02);
}
static int rt6190_probe(struct i2c_client *i2c)
{
struct device *dev = &i2c->dev;
struct rt6190_data *data;
struct gpio_desc *enable_gpio;
struct regmap *regmap;
struct regulator_dev *rdev;
struct regulator_config cfg = {};
unsigned int vid;
int ret;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
if (IS_ERR(enable_gpio))
return dev_err_probe(dev, PTR_ERR(enable_gpio), "Failed to get 'enable' gpio\n");
else if (enable_gpio)
usleep_range(RT6190_EN_TIME_US, RT6190_EN_TIME_US * 2);
regmap = devm_regmap_init_i2c(i2c, &rt6190_regmap_config);
if (IS_ERR(regmap))
return dev_err_probe(dev, PTR_ERR(regmap), "Failed to init regmap\n");
data->dev = dev;
data->enable_gpio = enable_gpio;
data->regmap = regmap;
i2c_set_clientdata(i2c, data);
ret = regmap_read(regmap, RT6190_REG_VID, &vid);
if (ret)
return dev_err_probe(dev, ret, "Failed to read VID\n");
if (vid != RICHTEK_VID)
return dev_err_probe(dev, -ENODEV, "Incorrect VID 0x%02x\n", vid);
ret = rt6190_init_registers(regmap);
if (ret)
return dev_err_probe(dev, ret, "Failed to init registers\n");
pm_runtime_set_active(dev);
ret = devm_pm_runtime_enable(dev);
if (ret)
return dev_err_probe(dev, ret, "Failed to set pm_runtime enable\n");
cfg.dev = dev;
cfg.of_node = dev->of_node;
cfg.driver_data = data;
cfg.init_data = of_get_regulator_init_data(dev, dev->of_node,
&rt6190_regulator_desc);
rdev = devm_regulator_register(dev, &rt6190_regulator_desc, &cfg);
if (IS_ERR(rdev))
return dev_err_probe(dev, PTR_ERR(rdev), "Failed to register regulator\n");
if (i2c->irq) {
ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
rt6190_irq_handler,
IRQF_ONESHOT, dev_name(dev),
rdev);
if (ret)
return dev_err_probe(dev, ret, "Failed to register interrupt\n");
}
return 0;
}
static int rt6190_runtime_suspend(struct device *dev)
{
struct rt6190_data *data = dev_get_drvdata(dev);
struct regmap *regmap = data->regmap;
if (!data->enable_gpio)
return 0;
regcache_cache_only(regmap, true);
regcache_mark_dirty(regmap);
gpiod_set_value(data->enable_gpio, 0);
return 0;
}
static int rt6190_runtime_resume(struct device *dev)
{
struct rt6190_data *data = dev_get_drvdata(dev);
struct regmap *regmap = data->regmap;
if (!data->enable_gpio)
return 0;
gpiod_set_value(data->enable_gpio, 1);
usleep_range(RT6190_EN_TIME_US, RT6190_EN_TIME_US * 2);
regcache_cache_only(regmap, false);
return regcache_sync(regmap);
}
static const struct dev_pm_ops __maybe_unused rt6190_dev_pm = {
RUNTIME_PM_OPS(rt6190_runtime_suspend, rt6190_runtime_resume, NULL)
};
static const struct of_device_id rt6190_of_dev_table[] = {
{ .compatible = "richtek,rt6190" },
{}
};
MODULE_DEVICE_TABLE(of, rt6190_of_dev_table);
static struct i2c_driver rt6190_driver = {
.driver = {
.name = "rt6190",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = rt6190_of_dev_table,
.pm = pm_ptr(&rt6190_dev_pm),
},
.probe = rt6190_probe,
};
module_i2c_driver(rt6190_driver);
MODULE_DESCRIPTION("Richtek RT6190 regulator driver");
MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink