linux-next/kernel/sysctl.c
Christian Brauner 7863dcc72d
pid: allow pid_max to be set per pid namespace
The pid_max sysctl is a global value. For a long time the default value
has been 65535 and during the pidfd dicussions Linus proposed to bump
pid_max by default (cf. [1]). Based on this discussion systemd started
bumping pid_max to 2^22. So all new systems now run with a very high
pid_max limit with some distros having also backported that change.
The decision to bump pid_max is obviously correct. It just doesn't make
a lot of sense nowadays to enforce such a low pid number. There's
sufficient tooling to make selecting specific processes without typing
really large pid numbers available.

In any case, there are workloads that have expections about how large
pid numbers they accept. Either for historical reasons or architectural
reasons. One concreate example is the 32-bit version of Android's bionic
libc which requires pid numbers less than 65536. There are workloads
where it is run in a 32-bit container on a 64-bit kernel. If the host
has a pid_max value greater than 65535 the libc will abort thread
creation because of size assumptions of pthread_mutex_t.

That's a fairly specific use-case however, in general specific workloads
that are moved into containers running on a host with a new kernel and a
new systemd can run into issues with large pid_max values. Obviously
making assumptions about the size of the allocated pid is suboptimal but
we have userspace that does it.

Of course, giving containers the ability to restrict the number of
processes in their respective pid namespace indepent of the global limit
through pid_max is something desirable in itself and comes in handy in
general.

Independent of motivating use-cases the existence of pid namespaces
makes this also a good semantical extension and there have been prior
proposals pushing in a similar direction.
The trick here is to minimize the risk of regressions which I think is
doable. The fact that pid namespaces are hierarchical will help us here.

What we mostly care about is that when the host sets a low pid_max
limit, say (crazy number) 100 that no descendant pid namespace can
allocate a higher pid number in its namespace. Since pid allocation is
hierarchial this can be ensured by checking each pid allocation against
the pid namespace's pid_max limit. This means if the allocation in the
descendant pid namespace succeeds, the ancestor pid namespace can reject
it. If the ancestor pid namespace has a higher limit than the descendant
pid namespace the descendant pid namespace will reject the pid
allocation. The ancestor pid namespace will obviously not care about
this.
All in all this means pid_max continues to enforce a system wide limit
on the number of processes but allows pid namespaces sufficient leeway
in handling workloads with assumptions about pid values and allows
containers to restrict the number of processes in a pid namespace
through the pid_max interface.

[1]: https://lore.kernel.org/linux-api/CAHk-=wiZ40LVjnXSi9iHLE_-ZBsWFGCgdmNiYZUXn1-V5YBg2g@mail.gmail.com
- rebased from 5.14-rc1
- a few fixes (missing ns_free_inum on error path, missing initialization, etc)
- permission check changes in pid_table_root_permissions
- unsigned int pid_max -> int pid_max (keep pid_max type as it was)
- add READ_ONCE in alloc_pid() as suggested by Christian
- rebased from 6.7 and take into account:
 * sysctl: treewide: drop unused argument ctl_table_root::set_ownership(table)
 * sysctl: treewide: constify ctl_table_header::ctl_table_arg
 * pidfd: add pidfs
 * tracing: Move saved_cmdline code into trace_sched_switch.c

Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Link: https://lore.kernel.org/r/20241122132459.135120-2-aleksandr.mikhalitsyn@canonical.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-02 11:25:25 +01:00

2253 lines
54 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* sysctl.c: General linux system control interface
*
* Begun 24 March 1995, Stephen Tweedie
* Added /proc support, Dec 1995
* Added bdflush entry and intvec min/max checking, 2/23/96, Tom Dyas.
* Added hooks for /proc/sys/net (minor, minor patch), 96/4/1, Mike Shaver.
* Added kernel/java-{interpreter,appletviewer}, 96/5/10, Mike Shaver.
* Dynamic registration fixes, Stephen Tweedie.
* Added kswapd-interval, ctrl-alt-del, printk stuff, 1/8/97, Chris Horn.
* Made sysctl support optional via CONFIG_SYSCTL, 1/10/97, Chris
* Horn.
* Added proc_doulongvec_ms_jiffies_minmax, 09/08/99, Carlos H. Bauer.
* Added proc_doulongvec_minmax, 09/08/99, Carlos H. Bauer.
* Changed linked lists to use list.h instead of lists.h, 02/24/00, Bill
* Wendling.
* The list_for_each() macro wasn't appropriate for the sysctl loop.
* Removed it and replaced it with older style, 03/23/00, Bill Wendling
*/
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/bitmap.h>
#include <linux/signal.h>
#include <linux/panic.h>
#include <linux/printk.h>
#include <linux/proc_fs.h>
#include <linux/security.h>
#include <linux/ctype.h>
#include <linux/kmemleak.h>
#include <linux/filter.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/kobject.h>
#include <linux/net.h>
#include <linux/sysrq.h>
#include <linux/highuid.h>
#include <linux/writeback.h>
#include <linux/ratelimit.h>
#include <linux/hugetlb.h>
#include <linux/initrd.h>
#include <linux/key.h>
#include <linux/times.h>
#include <linux/limits.h>
#include <linux/dcache.h>
#include <linux/syscalls.h>
#include <linux/vmstat.h>
#include <linux/nfs_fs.h>
#include <linux/acpi.h>
#include <linux/reboot.h>
#include <linux/ftrace.h>
#include <linux/perf_event.h>
#include <linux/oom.h>
#include <linux/kmod.h>
#include <linux/capability.h>
#include <linux/binfmts.h>
#include <linux/sched/sysctl.h>
#include <linux/mount.h>
#include <linux/userfaultfd_k.h>
#include <linux/pid.h>
#include "../lib/kstrtox.h"
#include <linux/uaccess.h>
#include <asm/processor.h>
#ifdef CONFIG_X86
#include <asm/nmi.h>
#include <asm/stacktrace.h>
#include <asm/io.h>
#endif
#ifdef CONFIG_SPARC
#include <asm/setup.h>
#endif
#ifdef CONFIG_RT_MUTEXES
#include <linux/rtmutex.h>
#endif
/* shared constants to be used in various sysctls */
const int sysctl_vals[] = { 0, 1, 2, 3, 4, 100, 200, 1000, 3000, INT_MAX, 65535, -1 };
EXPORT_SYMBOL(sysctl_vals);
const unsigned long sysctl_long_vals[] = { 0, 1, LONG_MAX };
EXPORT_SYMBOL_GPL(sysctl_long_vals);
#if defined(CONFIG_SYSCTL)
/* Constants used for minimum and maximum */
#ifdef CONFIG_PERF_EVENTS
static const int six_hundred_forty_kb = 640 * 1024;
#endif
static const int ngroups_max = NGROUPS_MAX;
static const int cap_last_cap = CAP_LAST_CAP;
#ifdef CONFIG_PROC_SYSCTL
/**
* enum sysctl_writes_mode - supported sysctl write modes
*
* @SYSCTL_WRITES_LEGACY: each write syscall must fully contain the sysctl value
* to be written, and multiple writes on the same sysctl file descriptor
* will rewrite the sysctl value, regardless of file position. No warning
* is issued when the initial position is not 0.
* @SYSCTL_WRITES_WARN: same as above but warn when the initial file position is
* not 0.
* @SYSCTL_WRITES_STRICT: writes to numeric sysctl entries must always be at
* file position 0 and the value must be fully contained in the buffer
* sent to the write syscall. If dealing with strings respect the file
* position, but restrict this to the max length of the buffer, anything
* passed the max length will be ignored. Multiple writes will append
* to the buffer.
*
* These write modes control how current file position affects the behavior of
* updating sysctl values through the proc interface on each write.
*/
enum sysctl_writes_mode {
SYSCTL_WRITES_LEGACY = -1,
SYSCTL_WRITES_WARN = 0,
SYSCTL_WRITES_STRICT = 1,
};
static enum sysctl_writes_mode sysctl_writes_strict = SYSCTL_WRITES_STRICT;
#endif /* CONFIG_PROC_SYSCTL */
#if defined(HAVE_ARCH_PICK_MMAP_LAYOUT) || \
defined(CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
int sysctl_legacy_va_layout;
#endif
#endif /* CONFIG_SYSCTL */
/*
* /proc/sys support
*/
#ifdef CONFIG_PROC_SYSCTL
static int _proc_do_string(char *data, int maxlen, int write,
char *buffer, size_t *lenp, loff_t *ppos)
{
size_t len;
char c, *p;
if (!data || !maxlen || !*lenp) {
*lenp = 0;
return 0;
}
if (write) {
if (sysctl_writes_strict == SYSCTL_WRITES_STRICT) {
/* Only continue writes not past the end of buffer. */
len = strlen(data);
if (len > maxlen - 1)
len = maxlen - 1;
if (*ppos > len)
return 0;
len = *ppos;
} else {
/* Start writing from beginning of buffer. */
len = 0;
}
*ppos += *lenp;
p = buffer;
while ((p - buffer) < *lenp && len < maxlen - 1) {
c = *(p++);
if (c == 0 || c == '\n')
break;
data[len++] = c;
}
data[len] = 0;
} else {
len = strlen(data);
if (len > maxlen)
len = maxlen;
if (*ppos > len) {
*lenp = 0;
return 0;
}
data += *ppos;
len -= *ppos;
if (len > *lenp)
len = *lenp;
if (len)
memcpy(buffer, data, len);
if (len < *lenp) {
buffer[len] = '\n';
len++;
}
*lenp = len;
*ppos += len;
}
return 0;
}
static void warn_sysctl_write(const struct ctl_table *table)
{
pr_warn_once("%s wrote to %s when file position was not 0!\n"
"This will not be supported in the future. To silence this\n"
"warning, set kernel.sysctl_writes_strict = -1\n",
current->comm, table->procname);
}
/**
* proc_first_pos_non_zero_ignore - check if first position is allowed
* @ppos: file position
* @table: the sysctl table
*
* Returns true if the first position is non-zero and the sysctl_writes_strict
* mode indicates this is not allowed for numeric input types. String proc
* handlers can ignore the return value.
*/
static bool proc_first_pos_non_zero_ignore(loff_t *ppos,
const struct ctl_table *table)
{
if (!*ppos)
return false;
switch (sysctl_writes_strict) {
case SYSCTL_WRITES_STRICT:
return true;
case SYSCTL_WRITES_WARN:
warn_sysctl_write(table);
return false;
default:
return false;
}
}
/**
* proc_dostring - read a string sysctl
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes a string from/to the user buffer. If the kernel
* buffer provided is not large enough to hold the string, the
* string is truncated. The copied string is %NULL-terminated.
* If the string is being read by the user process, it is copied
* and a newline '\n' is added. It is truncated if the buffer is
* not large enough.
*
* Returns 0 on success.
*/
int proc_dostring(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
if (write)
proc_first_pos_non_zero_ignore(ppos, table);
return _proc_do_string(table->data, table->maxlen, write, buffer, lenp,
ppos);
}
static void proc_skip_spaces(char **buf, size_t *size)
{
while (*size) {
if (!isspace(**buf))
break;
(*size)--;
(*buf)++;
}
}
static void proc_skip_char(char **buf, size_t *size, const char v)
{
while (*size) {
if (**buf != v)
break;
(*size)--;
(*buf)++;
}
}
/**
* strtoul_lenient - parse an ASCII formatted integer from a buffer and only
* fail on overflow
*
* @cp: kernel buffer containing the string to parse
* @endp: pointer to store the trailing characters
* @base: the base to use
* @res: where the parsed integer will be stored
*
* In case of success 0 is returned and @res will contain the parsed integer,
* @endp will hold any trailing characters.
* This function will fail the parse on overflow. If there wasn't an overflow
* the function will defer the decision what characters count as invalid to the
* caller.
*/
static int strtoul_lenient(const char *cp, char **endp, unsigned int base,
unsigned long *res)
{
unsigned long long result;
unsigned int rv;
cp = _parse_integer_fixup_radix(cp, &base);
rv = _parse_integer(cp, base, &result);
if ((rv & KSTRTOX_OVERFLOW) || (result != (unsigned long)result))
return -ERANGE;
cp += rv;
if (endp)
*endp = (char *)cp;
*res = (unsigned long)result;
return 0;
}
#define TMPBUFLEN 22
/**
* proc_get_long - reads an ASCII formatted integer from a user buffer
*
* @buf: a kernel buffer
* @size: size of the kernel buffer
* @val: this is where the number will be stored
* @neg: set to %TRUE if number is negative
* @perm_tr: a vector which contains the allowed trailers
* @perm_tr_len: size of the perm_tr vector
* @tr: pointer to store the trailer character
*
* In case of success %0 is returned and @buf and @size are updated with
* the amount of bytes read. If @tr is non-NULL and a trailing
* character exists (size is non-zero after returning from this
* function), @tr is updated with the trailing character.
*/
static int proc_get_long(char **buf, size_t *size,
unsigned long *val, bool *neg,
const char *perm_tr, unsigned perm_tr_len, char *tr)
{
char *p, tmp[TMPBUFLEN];
ssize_t len = *size;
if (len <= 0)
return -EINVAL;
if (len > TMPBUFLEN - 1)
len = TMPBUFLEN - 1;
memcpy(tmp, *buf, len);
tmp[len] = 0;
p = tmp;
if (*p == '-' && *size > 1) {
*neg = true;
p++;
} else
*neg = false;
if (!isdigit(*p))
return -EINVAL;
if (strtoul_lenient(p, &p, 0, val))
return -EINVAL;
len = p - tmp;
/* We don't know if the next char is whitespace thus we may accept
* invalid integers (e.g. 1234...a) or two integers instead of one
* (e.g. 123...1). So lets not allow such large numbers. */
if (len == TMPBUFLEN - 1)
return -EINVAL;
if (len < *size && perm_tr_len && !memchr(perm_tr, *p, perm_tr_len))
return -EINVAL;
if (tr && (len < *size))
*tr = *p;
*buf += len;
*size -= len;
return 0;
}
/**
* proc_put_long - converts an integer to a decimal ASCII formatted string
*
* @buf: the user buffer
* @size: the size of the user buffer
* @val: the integer to be converted
* @neg: sign of the number, %TRUE for negative
*
* In case of success @buf and @size are updated with the amount of bytes
* written.
*/
static void proc_put_long(void **buf, size_t *size, unsigned long val, bool neg)
{
int len;
char tmp[TMPBUFLEN], *p = tmp;
sprintf(p, "%s%lu", neg ? "-" : "", val);
len = strlen(tmp);
if (len > *size)
len = *size;
memcpy(*buf, tmp, len);
*size -= len;
*buf += len;
}
#undef TMPBUFLEN
static void proc_put_char(void **buf, size_t *size, char c)
{
if (*size) {
char **buffer = (char **)buf;
**buffer = c;
(*size)--;
(*buffer)++;
*buf = *buffer;
}
}
static int do_proc_dointvec_conv(bool *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
if (*negp) {
if (*lvalp > (unsigned long) INT_MAX + 1)
return -EINVAL;
WRITE_ONCE(*valp, -*lvalp);
} else {
if (*lvalp > (unsigned long) INT_MAX)
return -EINVAL;
WRITE_ONCE(*valp, *lvalp);
}
} else {
int val = READ_ONCE(*valp);
if (val < 0) {
*negp = true;
*lvalp = -(unsigned long)val;
} else {
*negp = false;
*lvalp = (unsigned long)val;
}
}
return 0;
}
static int do_proc_douintvec_conv(unsigned long *lvalp,
unsigned int *valp,
int write, void *data)
{
if (write) {
if (*lvalp > UINT_MAX)
return -EINVAL;
WRITE_ONCE(*valp, *lvalp);
} else {
unsigned int val = READ_ONCE(*valp);
*lvalp = (unsigned long)val;
}
return 0;
}
static const char proc_wspace_sep[] = { ' ', '\t', '\n' };
static int __do_proc_dointvec(void *tbl_data, const struct ctl_table *table,
int write, void *buffer,
size_t *lenp, loff_t *ppos,
int (*conv)(bool *negp, unsigned long *lvalp, int *valp,
int write, void *data),
void *data)
{
int *i, vleft, first = 1, err = 0;
size_t left;
char *p;
if (!tbl_data || !table->maxlen || !*lenp || (*ppos && !write)) {
*lenp = 0;
return 0;
}
i = (int *) tbl_data;
vleft = table->maxlen / sizeof(*i);
left = *lenp;
if (!conv)
conv = do_proc_dointvec_conv;
if (write) {
if (proc_first_pos_non_zero_ignore(ppos, table))
goto out;
if (left > PAGE_SIZE - 1)
left = PAGE_SIZE - 1;
p = buffer;
}
for (; left && vleft--; i++, first=0) {
unsigned long lval;
bool neg;
if (write) {
proc_skip_spaces(&p, &left);
if (!left)
break;
err = proc_get_long(&p, &left, &lval, &neg,
proc_wspace_sep,
sizeof(proc_wspace_sep), NULL);
if (err)
break;
if (conv(&neg, &lval, i, 1, data)) {
err = -EINVAL;
break;
}
} else {
if (conv(&neg, &lval, i, 0, data)) {
err = -EINVAL;
break;
}
if (!first)
proc_put_char(&buffer, &left, '\t');
proc_put_long(&buffer, &left, lval, neg);
}
}
if (!write && !first && left && !err)
proc_put_char(&buffer, &left, '\n');
if (write && !err && left)
proc_skip_spaces(&p, &left);
if (write && first)
return err ? : -EINVAL;
*lenp -= left;
out:
*ppos += *lenp;
return err;
}
static int do_proc_dointvec(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos,
int (*conv)(bool *negp, unsigned long *lvalp, int *valp,
int write, void *data),
void *data)
{
return __do_proc_dointvec(table->data, table, write,
buffer, lenp, ppos, conv, data);
}
static int do_proc_douintvec_w(unsigned int *tbl_data,
const struct ctl_table *table,
void *buffer,
size_t *lenp, loff_t *ppos,
int (*conv)(unsigned long *lvalp,
unsigned int *valp,
int write, void *data),
void *data)
{
unsigned long lval;
int err = 0;
size_t left;
bool neg;
char *p = buffer;
left = *lenp;
if (proc_first_pos_non_zero_ignore(ppos, table))
goto bail_early;
if (left > PAGE_SIZE - 1)
left = PAGE_SIZE - 1;
proc_skip_spaces(&p, &left);
if (!left) {
err = -EINVAL;
goto out_free;
}
err = proc_get_long(&p, &left, &lval, &neg,
proc_wspace_sep,
sizeof(proc_wspace_sep), NULL);
if (err || neg) {
err = -EINVAL;
goto out_free;
}
if (conv(&lval, tbl_data, 1, data)) {
err = -EINVAL;
goto out_free;
}
if (!err && left)
proc_skip_spaces(&p, &left);
out_free:
if (err)
return -EINVAL;
return 0;
/* This is in keeping with old __do_proc_dointvec() */
bail_early:
*ppos += *lenp;
return err;
}
static int do_proc_douintvec_r(unsigned int *tbl_data, void *buffer,
size_t *lenp, loff_t *ppos,
int (*conv)(unsigned long *lvalp,
unsigned int *valp,
int write, void *data),
void *data)
{
unsigned long lval;
int err = 0;
size_t left;
left = *lenp;
if (conv(&lval, tbl_data, 0, data)) {
err = -EINVAL;
goto out;
}
proc_put_long(&buffer, &left, lval, false);
if (!left)
goto out;
proc_put_char(&buffer, &left, '\n');
out:
*lenp -= left;
*ppos += *lenp;
return err;
}
static int __do_proc_douintvec(void *tbl_data, const struct ctl_table *table,
int write, void *buffer,
size_t *lenp, loff_t *ppos,
int (*conv)(unsigned long *lvalp,
unsigned int *valp,
int write, void *data),
void *data)
{
unsigned int *i, vleft;
if (!tbl_data || !table->maxlen || !*lenp || (*ppos && !write)) {
*lenp = 0;
return 0;
}
i = (unsigned int *) tbl_data;
vleft = table->maxlen / sizeof(*i);
/*
* Arrays are not supported, keep this simple. *Do not* add
* support for them.
*/
if (vleft != 1) {
*lenp = 0;
return -EINVAL;
}
if (!conv)
conv = do_proc_douintvec_conv;
if (write)
return do_proc_douintvec_w(i, table, buffer, lenp, ppos,
conv, data);
return do_proc_douintvec_r(i, buffer, lenp, ppos, conv, data);
}
int do_proc_douintvec(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos,
int (*conv)(unsigned long *lvalp,
unsigned int *valp,
int write, void *data),
void *data)
{
return __do_proc_douintvec(table->data, table, write,
buffer, lenp, ppos, conv, data);
}
/**
* proc_dobool - read/write a bool
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes one integer value from/to the user buffer,
* treated as an ASCII string.
*
* table->data must point to a bool variable and table->maxlen must
* be sizeof(bool).
*
* Returns 0 on success.
*/
int proc_dobool(const struct ctl_table *table, int write, void *buffer,
size_t *lenp, loff_t *ppos)
{
struct ctl_table tmp;
bool *data = table->data;
int res, val;
/* Do not support arrays yet. */
if (table->maxlen != sizeof(bool))
return -EINVAL;
tmp = *table;
tmp.maxlen = sizeof(val);
tmp.data = &val;
val = READ_ONCE(*data);
res = proc_dointvec(&tmp, write, buffer, lenp, ppos);
if (res)
return res;
if (write)
WRITE_ONCE(*data, val);
return 0;
}
/**
* proc_dointvec - read a vector of integers
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
*
* Returns 0 on success.
*/
int proc_dointvec(const struct ctl_table *table, int write, void *buffer,
size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table, write, buffer, lenp, ppos, NULL, NULL);
}
/**
* proc_douintvec - read a vector of unsigned integers
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) unsigned integer
* values from/to the user buffer, treated as an ASCII string.
*
* Returns 0 on success.
*/
int proc_douintvec(const struct ctl_table *table, int write, void *buffer,
size_t *lenp, loff_t *ppos)
{
return do_proc_douintvec(table, write, buffer, lenp, ppos,
do_proc_douintvec_conv, NULL);
}
/*
* Taint values can only be increased
* This means we can safely use a temporary.
*/
static int proc_taint(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table t;
unsigned long tmptaint = get_taint();
int err;
if (write && !capable(CAP_SYS_ADMIN))
return -EPERM;
t = *table;
t.data = &tmptaint;
err = proc_doulongvec_minmax(&t, write, buffer, lenp, ppos);
if (err < 0)
return err;
if (write) {
int i;
/*
* If we are relying on panic_on_taint not producing
* false positives due to userspace input, bail out
* before setting the requested taint flags.
*/
if (panic_on_taint_nousertaint && (tmptaint & panic_on_taint))
return -EINVAL;
/*
* Poor man's atomic or. Not worth adding a primitive
* to everyone's atomic.h for this
*/
for (i = 0; i < TAINT_FLAGS_COUNT; i++)
if ((1UL << i) & tmptaint)
add_taint(i, LOCKDEP_STILL_OK);
}
return err;
}
/**
* struct do_proc_dointvec_minmax_conv_param - proc_dointvec_minmax() range checking structure
* @min: pointer to minimum allowable value
* @max: pointer to maximum allowable value
*
* The do_proc_dointvec_minmax_conv_param structure provides the
* minimum and maximum values for doing range checking for those sysctl
* parameters that use the proc_dointvec_minmax() handler.
*/
struct do_proc_dointvec_minmax_conv_param {
int *min;
int *max;
};
static int do_proc_dointvec_minmax_conv(bool *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
int tmp, ret;
struct do_proc_dointvec_minmax_conv_param *param = data;
/*
* If writing, first do so via a temporary local int so we can
* bounds-check it before touching *valp.
*/
int *ip = write ? &tmp : valp;
ret = do_proc_dointvec_conv(negp, lvalp, ip, write, data);
if (ret)
return ret;
if (write) {
if ((param->min && *param->min > tmp) ||
(param->max && *param->max < tmp))
return -EINVAL;
WRITE_ONCE(*valp, tmp);
}
return 0;
}
/**
* proc_dointvec_minmax - read a vector of integers with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
*
* This routine will ensure the values are within the range specified by
* table->extra1 (min) and table->extra2 (max).
*
* Returns 0 on success or -EINVAL on write when the range check fails.
*/
int proc_dointvec_minmax(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
struct do_proc_dointvec_minmax_conv_param param = {
.min = (int *) table->extra1,
.max = (int *) table->extra2,
};
return do_proc_dointvec(table, write, buffer, lenp, ppos,
do_proc_dointvec_minmax_conv, &param);
}
/**
* struct do_proc_douintvec_minmax_conv_param - proc_douintvec_minmax() range checking structure
* @min: pointer to minimum allowable value
* @max: pointer to maximum allowable value
*
* The do_proc_douintvec_minmax_conv_param structure provides the
* minimum and maximum values for doing range checking for those sysctl
* parameters that use the proc_douintvec_minmax() handler.
*/
struct do_proc_douintvec_minmax_conv_param {
unsigned int *min;
unsigned int *max;
};
static int do_proc_douintvec_minmax_conv(unsigned long *lvalp,
unsigned int *valp,
int write, void *data)
{
int ret;
unsigned int tmp;
struct do_proc_douintvec_minmax_conv_param *param = data;
/* write via temporary local uint for bounds-checking */
unsigned int *up = write ? &tmp : valp;
ret = do_proc_douintvec_conv(lvalp, up, write, data);
if (ret)
return ret;
if (write) {
if ((param->min && *param->min > tmp) ||
(param->max && *param->max < tmp))
return -ERANGE;
WRITE_ONCE(*valp, tmp);
}
return 0;
}
/**
* proc_douintvec_minmax - read a vector of unsigned ints with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) unsigned integer
* values from/to the user buffer, treated as an ASCII string. Negative
* strings are not allowed.
*
* This routine will ensure the values are within the range specified by
* table->extra1 (min) and table->extra2 (max). There is a final sanity
* check for UINT_MAX to avoid having to support wrap around uses from
* userspace.
*
* Returns 0 on success or -ERANGE on write when the range check fails.
*/
int proc_douintvec_minmax(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
struct do_proc_douintvec_minmax_conv_param param = {
.min = (unsigned int *) table->extra1,
.max = (unsigned int *) table->extra2,
};
return do_proc_douintvec(table, write, buffer, lenp, ppos,
do_proc_douintvec_minmax_conv, &param);
}
/**
* proc_dou8vec_minmax - read a vector of unsigned chars with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(u8) unsigned chars
* values from/to the user buffer, treated as an ASCII string. Negative
* strings are not allowed.
*
* This routine will ensure the values are within the range specified by
* table->extra1 (min) and table->extra2 (max).
*
* Returns 0 on success or an error on write when the range check fails.
*/
int proc_dou8vec_minmax(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table tmp;
unsigned int min = 0, max = 255U, val;
u8 *data = table->data;
struct do_proc_douintvec_minmax_conv_param param = {
.min = &min,
.max = &max,
};
int res;
/* Do not support arrays yet. */
if (table->maxlen != sizeof(u8))
return -EINVAL;
if (table->extra1)
min = *(unsigned int *) table->extra1;
if (table->extra2)
max = *(unsigned int *) table->extra2;
tmp = *table;
tmp.maxlen = sizeof(val);
tmp.data = &val;
val = READ_ONCE(*data);
res = do_proc_douintvec(&tmp, write, buffer, lenp, ppos,
do_proc_douintvec_minmax_conv, &param);
if (res)
return res;
if (write)
WRITE_ONCE(*data, val);
return 0;
}
EXPORT_SYMBOL_GPL(proc_dou8vec_minmax);
#ifdef CONFIG_MAGIC_SYSRQ
static int sysrq_sysctl_handler(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
int tmp, ret;
tmp = sysrq_mask();
ret = __do_proc_dointvec(&tmp, table, write, buffer,
lenp, ppos, NULL, NULL);
if (ret || !write)
return ret;
if (write)
sysrq_toggle_support(tmp);
return 0;
}
#endif
static int __do_proc_doulongvec_minmax(void *data,
const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos,
unsigned long convmul, unsigned long convdiv)
{
unsigned long *i, *min, *max;
int vleft, first = 1, err = 0;
size_t left;
char *p;
if (!data || !table->maxlen || !*lenp || (*ppos && !write)) {
*lenp = 0;
return 0;
}
i = data;
min = table->extra1;
max = table->extra2;
vleft = table->maxlen / sizeof(unsigned long);
left = *lenp;
if (write) {
if (proc_first_pos_non_zero_ignore(ppos, table))
goto out;
if (left > PAGE_SIZE - 1)
left = PAGE_SIZE - 1;
p = buffer;
}
for (; left && vleft--; i++, first = 0) {
unsigned long val;
if (write) {
bool neg;
proc_skip_spaces(&p, &left);
if (!left)
break;
err = proc_get_long(&p, &left, &val, &neg,
proc_wspace_sep,
sizeof(proc_wspace_sep), NULL);
if (err || neg) {
err = -EINVAL;
break;
}
val = convmul * val / convdiv;
if ((min && val < *min) || (max && val > *max)) {
err = -EINVAL;
break;
}
WRITE_ONCE(*i, val);
} else {
val = convdiv * READ_ONCE(*i) / convmul;
if (!first)
proc_put_char(&buffer, &left, '\t');
proc_put_long(&buffer, &left, val, false);
}
}
if (!write && !first && left && !err)
proc_put_char(&buffer, &left, '\n');
if (write && !err)
proc_skip_spaces(&p, &left);
if (write && first)
return err ? : -EINVAL;
*lenp -= left;
out:
*ppos += *lenp;
return err;
}
static int do_proc_doulongvec_minmax(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos, unsigned long convmul,
unsigned long convdiv)
{
return __do_proc_doulongvec_minmax(table->data, table, write,
buffer, lenp, ppos, convmul, convdiv);
}
/**
* proc_doulongvec_minmax - read a vector of long integers with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned long) unsigned long
* values from/to the user buffer, treated as an ASCII string.
*
* This routine will ensure the values are within the range specified by
* table->extra1 (min) and table->extra2 (max).
*
* Returns 0 on success.
*/
int proc_doulongvec_minmax(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_doulongvec_minmax(table, write, buffer, lenp, ppos, 1l, 1l);
}
/**
* proc_doulongvec_ms_jiffies_minmax - read a vector of millisecond values with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned long) unsigned long
* values from/to the user buffer, treated as an ASCII string. The values
* are treated as milliseconds, and converted to jiffies when they are stored.
*
* This routine will ensure the values are within the range specified by
* table->extra1 (min) and table->extra2 (max).
*
* Returns 0 on success.
*/
int proc_doulongvec_ms_jiffies_minmax(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_doulongvec_minmax(table, write, buffer,
lenp, ppos, HZ, 1000l);
}
static int do_proc_dointvec_jiffies_conv(bool *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
if (*lvalp > INT_MAX / HZ)
return 1;
if (*negp)
WRITE_ONCE(*valp, -*lvalp * HZ);
else
WRITE_ONCE(*valp, *lvalp * HZ);
} else {
int val = READ_ONCE(*valp);
unsigned long lval;
if (val < 0) {
*negp = true;
lval = -(unsigned long)val;
} else {
*negp = false;
lval = (unsigned long)val;
}
*lvalp = lval / HZ;
}
return 0;
}
static int do_proc_dointvec_userhz_jiffies_conv(bool *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
if (USER_HZ < HZ && *lvalp > (LONG_MAX / HZ) * USER_HZ)
return 1;
*valp = clock_t_to_jiffies(*negp ? -*lvalp : *lvalp);
} else {
int val = *valp;
unsigned long lval;
if (val < 0) {
*negp = true;
lval = -(unsigned long)val;
} else {
*negp = false;
lval = (unsigned long)val;
}
*lvalp = jiffies_to_clock_t(lval);
}
return 0;
}
static int do_proc_dointvec_ms_jiffies_conv(bool *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
unsigned long jif = msecs_to_jiffies(*negp ? -*lvalp : *lvalp);
if (jif > INT_MAX)
return 1;
WRITE_ONCE(*valp, (int)jif);
} else {
int val = READ_ONCE(*valp);
unsigned long lval;
if (val < 0) {
*negp = true;
lval = -(unsigned long)val;
} else {
*negp = false;
lval = (unsigned long)val;
}
*lvalp = jiffies_to_msecs(lval);
}
return 0;
}
static int do_proc_dointvec_ms_jiffies_minmax_conv(bool *negp, unsigned long *lvalp,
int *valp, int write, void *data)
{
int tmp, ret;
struct do_proc_dointvec_minmax_conv_param *param = data;
/*
* If writing, first do so via a temporary local int so we can
* bounds-check it before touching *valp.
*/
int *ip = write ? &tmp : valp;
ret = do_proc_dointvec_ms_jiffies_conv(negp, lvalp, ip, write, data);
if (ret)
return ret;
if (write) {
if ((param->min && *param->min > tmp) ||
(param->max && *param->max < tmp))
return -EINVAL;
*valp = tmp;
}
return 0;
}
/**
* proc_dointvec_jiffies - read a vector of integers as seconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
* The values read are assumed to be in seconds, and are converted into
* jiffies.
*
* Returns 0 on success.
*/
int proc_dointvec_jiffies(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table,write,buffer,lenp,ppos,
do_proc_dointvec_jiffies_conv,NULL);
}
int proc_dointvec_ms_jiffies_minmax(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
struct do_proc_dointvec_minmax_conv_param param = {
.min = (int *) table->extra1,
.max = (int *) table->extra2,
};
return do_proc_dointvec(table, write, buffer, lenp, ppos,
do_proc_dointvec_ms_jiffies_minmax_conv, &param);
}
/**
* proc_dointvec_userhz_jiffies - read a vector of integers as 1/USER_HZ seconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: pointer to the file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
* The values read are assumed to be in 1/USER_HZ seconds, and
* are converted into jiffies.
*
* Returns 0 on success.
*/
int proc_dointvec_userhz_jiffies(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table, write, buffer, lenp, ppos,
do_proc_dointvec_userhz_jiffies_conv, NULL);
}
/**
* proc_dointvec_ms_jiffies - read a vector of integers as 1 milliseconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: the current position in the file
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
* The values read are assumed to be in 1/1000 seconds, and
* are converted into jiffies.
*
* Returns 0 on success.
*/
int proc_dointvec_ms_jiffies(const struct ctl_table *table, int write, void *buffer,
size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table, write, buffer, lenp, ppos,
do_proc_dointvec_ms_jiffies_conv, NULL);
}
static int proc_do_cad_pid(const struct ctl_table *table, int write, void *buffer,
size_t *lenp, loff_t *ppos)
{
struct pid *new_pid;
pid_t tmp;
int r;
tmp = pid_vnr(cad_pid);
r = __do_proc_dointvec(&tmp, table, write, buffer,
lenp, ppos, NULL, NULL);
if (r || !write)
return r;
new_pid = find_get_pid(tmp);
if (!new_pid)
return -ESRCH;
put_pid(xchg(&cad_pid, new_pid));
return 0;
}
/**
* proc_do_large_bitmap - read/write from/to a large bitmap
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* The bitmap is stored at table->data and the bitmap length (in bits)
* in table->maxlen.
*
* We use a range comma separated format (e.g. 1,3-4,10-10) so that
* large bitmaps may be represented in a compact manner. Writing into
* the file will clear the bitmap then update it with the given input.
*
* Returns 0 on success.
*/
int proc_do_large_bitmap(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
int err = 0;
size_t left = *lenp;
unsigned long bitmap_len = table->maxlen;
unsigned long *bitmap = *(unsigned long **) table->data;
unsigned long *tmp_bitmap = NULL;
char tr_a[] = { '-', ',', '\n' }, tr_b[] = { ',', '\n', 0 }, c;
if (!bitmap || !bitmap_len || !left || (*ppos && !write)) {
*lenp = 0;
return 0;
}
if (write) {
char *p = buffer;
size_t skipped = 0;
if (left > PAGE_SIZE - 1) {
left = PAGE_SIZE - 1;
/* How much of the buffer we'll skip this pass */
skipped = *lenp - left;
}
tmp_bitmap = bitmap_zalloc(bitmap_len, GFP_KERNEL);
if (!tmp_bitmap)
return -ENOMEM;
proc_skip_char(&p, &left, '\n');
while (!err && left) {
unsigned long val_a, val_b;
bool neg;
size_t saved_left;
/* In case we stop parsing mid-number, we can reset */
saved_left = left;
err = proc_get_long(&p, &left, &val_a, &neg, tr_a,
sizeof(tr_a), &c);
/*
* If we consumed the entirety of a truncated buffer or
* only one char is left (may be a "-"), then stop here,
* reset, & come back for more.
*/
if ((left <= 1) && skipped) {
left = saved_left;
break;
}
if (err)
break;
if (val_a >= bitmap_len || neg) {
err = -EINVAL;
break;
}
val_b = val_a;
if (left) {
p++;
left--;
}
if (c == '-') {
err = proc_get_long(&p, &left, &val_b,
&neg, tr_b, sizeof(tr_b),
&c);
/*
* If we consumed all of a truncated buffer or
* then stop here, reset, & come back for more.
*/
if (!left && skipped) {
left = saved_left;
break;
}
if (err)
break;
if (val_b >= bitmap_len || neg ||
val_a > val_b) {
err = -EINVAL;
break;
}
if (left) {
p++;
left--;
}
}
bitmap_set(tmp_bitmap, val_a, val_b - val_a + 1);
proc_skip_char(&p, &left, '\n');
}
left += skipped;
} else {
unsigned long bit_a, bit_b = 0;
bool first = 1;
while (left) {
bit_a = find_next_bit(bitmap, bitmap_len, bit_b);
if (bit_a >= bitmap_len)
break;
bit_b = find_next_zero_bit(bitmap, bitmap_len,
bit_a + 1) - 1;
if (!first)
proc_put_char(&buffer, &left, ',');
proc_put_long(&buffer, &left, bit_a, false);
if (bit_a != bit_b) {
proc_put_char(&buffer, &left, '-');
proc_put_long(&buffer, &left, bit_b, false);
}
first = 0; bit_b++;
}
proc_put_char(&buffer, &left, '\n');
}
if (!err) {
if (write) {
if (*ppos)
bitmap_or(bitmap, bitmap, tmp_bitmap, bitmap_len);
else
bitmap_copy(bitmap, tmp_bitmap, bitmap_len);
}
*lenp -= left;
*ppos += *lenp;
}
bitmap_free(tmp_bitmap);
return err;
}
#else /* CONFIG_PROC_SYSCTL */
int proc_dostring(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dobool(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_douintvec(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec_minmax(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_douintvec_minmax(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dou8vec_minmax(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec_jiffies(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec_ms_jiffies_minmax(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec_userhz_jiffies(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec_ms_jiffies(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_doulongvec_minmax(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_doulongvec_ms_jiffies_minmax(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_do_large_bitmap(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
#endif /* CONFIG_PROC_SYSCTL */
#if defined(CONFIG_SYSCTL)
int proc_do_static_key(const struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
struct static_key *key = (struct static_key *)table->data;
static DEFINE_MUTEX(static_key_mutex);
int val, ret;
struct ctl_table tmp = {
.data = &val,
.maxlen = sizeof(val),
.mode = table->mode,
.extra1 = SYSCTL_ZERO,
.extra2 = SYSCTL_ONE,
};
if (write && !capable(CAP_SYS_ADMIN))
return -EPERM;
mutex_lock(&static_key_mutex);
val = static_key_enabled(key);
ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos);
if (write && !ret) {
if (val)
static_key_enable(key);
else
static_key_disable(key);
}
mutex_unlock(&static_key_mutex);
return ret;
}
static struct ctl_table kern_table[] = {
{
.procname = "panic",
.data = &panic_timeout,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#ifdef CONFIG_PROC_SYSCTL
{
.procname = "tainted",
.maxlen = sizeof(long),
.mode = 0644,
.proc_handler = proc_taint,
},
{
.procname = "sysctl_writes_strict",
.data = &sysctl_writes_strict,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_NEG_ONE,
.extra2 = SYSCTL_ONE,
},
#endif
{
.procname = "print-fatal-signals",
.data = &print_fatal_signals,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#ifdef CONFIG_SPARC
{
.procname = "reboot-cmd",
.data = reboot_command,
.maxlen = 256,
.mode = 0644,
.proc_handler = proc_dostring,
},
{
.procname = "stop-a",
.data = &stop_a_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
{
.procname = "scons-poweroff",
.data = &scons_pwroff,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#endif
#ifdef CONFIG_SPARC64
{
.procname = "tsb-ratio",
.data = &sysctl_tsb_ratio,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#endif
#ifdef CONFIG_PARISC
{
.procname = "soft-power",
.data = &pwrsw_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#endif
#ifdef CONFIG_SYSCTL_ARCH_UNALIGN_ALLOW
{
.procname = "unaligned-trap",
.data = &unaligned_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#endif
#ifdef CONFIG_STACK_TRACER
{
.procname = "stack_tracer_enabled",
.data = &stack_tracer_enabled,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = stack_trace_sysctl,
},
#endif
#ifdef CONFIG_TRACING
{
.procname = "ftrace_dump_on_oops",
.data = &ftrace_dump_on_oops,
.maxlen = MAX_TRACER_SIZE,
.mode = 0644,
.proc_handler = proc_dostring,
},
{
.procname = "traceoff_on_warning",
.data = &__disable_trace_on_warning,
.maxlen = sizeof(__disable_trace_on_warning),
.mode = 0644,
.proc_handler = proc_dointvec,
},
{
.procname = "tracepoint_printk",
.data = &tracepoint_printk,
.maxlen = sizeof(tracepoint_printk),
.mode = 0644,
.proc_handler = tracepoint_printk_sysctl,
},
#endif
#ifdef CONFIG_MODULES
{
.procname = "modprobe",
.data = &modprobe_path,
.maxlen = KMOD_PATH_LEN,
.mode = 0644,
.proc_handler = proc_dostring,
},
{
.procname = "modules_disabled",
.data = &modules_disabled,
.maxlen = sizeof(int),
.mode = 0644,
/* only handle a transition from default "0" to "1" */
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ONE,
.extra2 = SYSCTL_ONE,
},
#endif
#ifdef CONFIG_UEVENT_HELPER
{
.procname = "hotplug",
.data = &uevent_helper,
.maxlen = UEVENT_HELPER_PATH_LEN,
.mode = 0644,
.proc_handler = proc_dostring,
},
#endif
#ifdef CONFIG_MAGIC_SYSRQ
{
.procname = "sysrq",
.data = NULL,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = sysrq_sysctl_handler,
},
#endif
#ifdef CONFIG_PROC_SYSCTL
{
.procname = "cad_pid",
.data = NULL,
.maxlen = sizeof (int),
.mode = 0600,
.proc_handler = proc_do_cad_pid,
},
#endif
{
.procname = "threads-max",
.data = NULL,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = sysctl_max_threads,
},
{
.procname = "overflowuid",
.data = &overflowuid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ZERO,
.extra2 = SYSCTL_MAXOLDUID,
},
{
.procname = "overflowgid",
.data = &overflowgid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ZERO,
.extra2 = SYSCTL_MAXOLDUID,
},
#ifdef CONFIG_S390
{
.procname = "userprocess_debug",
.data = &show_unhandled_signals,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#endif
{
.procname = "panic_on_oops",
.data = &panic_on_oops,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
{
.procname = "panic_print",
.data = &panic_print,
.maxlen = sizeof(unsigned long),
.mode = 0644,
.proc_handler = proc_doulongvec_minmax,
},
{
.procname = "ngroups_max",
.data = (void *)&ngroups_max,
.maxlen = sizeof (int),
.mode = 0444,
.proc_handler = proc_dointvec,
},
{
.procname = "cap_last_cap",
.data = (void *)&cap_last_cap,
.maxlen = sizeof(int),
.mode = 0444,
.proc_handler = proc_dointvec,
},
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86)
{
.procname = "unknown_nmi_panic",
.data = &unknown_nmi_panic,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#endif
#if (defined(CONFIG_X86_32) || defined(CONFIG_PARISC)) && \
defined(CONFIG_DEBUG_STACKOVERFLOW)
{
.procname = "panic_on_stackoverflow",
.data = &sysctl_panic_on_stackoverflow,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#endif
#if defined(CONFIG_X86)
{
.procname = "panic_on_unrecovered_nmi",
.data = &panic_on_unrecovered_nmi,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
{
.procname = "panic_on_io_nmi",
.data = &panic_on_io_nmi,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
{
.procname = "bootloader_type",
.data = &bootloader_type,
.maxlen = sizeof (int),
.mode = 0444,
.proc_handler = proc_dointvec,
},
{
.procname = "bootloader_version",
.data = &bootloader_version,
.maxlen = sizeof (int),
.mode = 0444,
.proc_handler = proc_dointvec,
},
{
.procname = "io_delay_type",
.data = &io_delay_type,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#endif
#if defined(CONFIG_MMU)
{
.procname = "randomize_va_space",
.data = &randomize_va_space,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#endif
#if defined(CONFIG_S390) && defined(CONFIG_SMP)
{
.procname = "spin_retry",
.data = &spin_retry,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#endif
#if defined(CONFIG_ACPI_SLEEP) && defined(CONFIG_X86)
{
.procname = "acpi_video_flags",
.data = &acpi_realmode_flags,
.maxlen = sizeof (unsigned long),
.mode = 0644,
.proc_handler = proc_doulongvec_minmax,
},
#endif
#ifdef CONFIG_SYSCTL_ARCH_UNALIGN_NO_WARN
{
.procname = "ignore-unaligned-usertrap",
.data = &no_unaligned_warning,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#endif
#ifdef CONFIG_RT_MUTEXES
{
.procname = "max_lock_depth",
.data = &max_lock_depth,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#endif
#ifdef CONFIG_PERF_EVENTS
/*
* User-space scripts rely on the existence of this file
* as a feature check for perf_events being enabled.
*
* So it's an ABI, do not remove!
*/
{
.procname = "perf_event_paranoid",
.data = &sysctl_perf_event_paranoid,
.maxlen = sizeof(sysctl_perf_event_paranoid),
.mode = 0644,
.proc_handler = proc_dointvec,
},
{
.procname = "perf_event_mlock_kb",
.data = &sysctl_perf_event_mlock,
.maxlen = sizeof(sysctl_perf_event_mlock),
.mode = 0644,
.proc_handler = proc_dointvec,
},
{
.procname = "perf_event_max_sample_rate",
.data = &sysctl_perf_event_sample_rate,
.maxlen = sizeof(sysctl_perf_event_sample_rate),
.mode = 0644,
.proc_handler = perf_event_max_sample_rate_handler,
.extra1 = SYSCTL_ONE,
},
{
.procname = "perf_cpu_time_max_percent",
.data = &sysctl_perf_cpu_time_max_percent,
.maxlen = sizeof(sysctl_perf_cpu_time_max_percent),
.mode = 0644,
.proc_handler = perf_cpu_time_max_percent_handler,
.extra1 = SYSCTL_ZERO,
.extra2 = SYSCTL_ONE_HUNDRED,
},
{
.procname = "perf_event_max_stack",
.data = &sysctl_perf_event_max_stack,
.maxlen = sizeof(sysctl_perf_event_max_stack),
.mode = 0644,
.proc_handler = perf_event_max_stack_handler,
.extra1 = SYSCTL_ZERO,
.extra2 = (void *)&six_hundred_forty_kb,
},
{
.procname = "perf_event_max_contexts_per_stack",
.data = &sysctl_perf_event_max_contexts_per_stack,
.maxlen = sizeof(sysctl_perf_event_max_contexts_per_stack),
.mode = 0644,
.proc_handler = perf_event_max_stack_handler,
.extra1 = SYSCTL_ZERO,
.extra2 = SYSCTL_ONE_THOUSAND,
},
#endif
{
.procname = "panic_on_warn",
.data = &panic_on_warn,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ZERO,
.extra2 = SYSCTL_ONE,
},
#ifdef CONFIG_TREE_RCU
{
.procname = "panic_on_rcu_stall",
.data = &sysctl_panic_on_rcu_stall,
.maxlen = sizeof(sysctl_panic_on_rcu_stall),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ZERO,
.extra2 = SYSCTL_ONE,
},
{
.procname = "max_rcu_stall_to_panic",
.data = &sysctl_max_rcu_stall_to_panic,
.maxlen = sizeof(sysctl_max_rcu_stall_to_panic),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ONE,
.extra2 = SYSCTL_INT_MAX,
},
#endif
};
static struct ctl_table vm_table[] = {
{
.procname = "overcommit_memory",
.data = &sysctl_overcommit_memory,
.maxlen = sizeof(sysctl_overcommit_memory),
.mode = 0644,
.proc_handler = overcommit_policy_handler,
.extra1 = SYSCTL_ZERO,
.extra2 = SYSCTL_TWO,
},
{
.procname = "overcommit_ratio",
.data = &sysctl_overcommit_ratio,
.maxlen = sizeof(sysctl_overcommit_ratio),
.mode = 0644,
.proc_handler = overcommit_ratio_handler,
},
{
.procname = "overcommit_kbytes",
.data = &sysctl_overcommit_kbytes,
.maxlen = sizeof(sysctl_overcommit_kbytes),
.mode = 0644,
.proc_handler = overcommit_kbytes_handler,
},
{
.procname = "page-cluster",
.data = &page_cluster,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ZERO,
.extra2 = (void *)&page_cluster_max,
},
{
.procname = "dirtytime_expire_seconds",
.data = &dirtytime_expire_interval,
.maxlen = sizeof(dirtytime_expire_interval),
.mode = 0644,
.proc_handler = dirtytime_interval_handler,
.extra1 = SYSCTL_ZERO,
},
{
.procname = "swappiness",
.data = &vm_swappiness,
.maxlen = sizeof(vm_swappiness),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ZERO,
.extra2 = SYSCTL_TWO_HUNDRED,
},
#ifdef CONFIG_NUMA
{
.procname = "numa_stat",
.data = &sysctl_vm_numa_stat,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = sysctl_vm_numa_stat_handler,
.extra1 = SYSCTL_ZERO,
.extra2 = SYSCTL_ONE,
},
#endif
{
.procname = "drop_caches",
.data = &sysctl_drop_caches,
.maxlen = sizeof(int),
.mode = 0200,
.proc_handler = drop_caches_sysctl_handler,
.extra1 = SYSCTL_ONE,
.extra2 = SYSCTL_FOUR,
},
{
.procname = "page_lock_unfairness",
.data = &sysctl_page_lock_unfairness,
.maxlen = sizeof(sysctl_page_lock_unfairness),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ZERO,
},
#ifdef CONFIG_MMU
{
.procname = "max_map_count",
.data = &sysctl_max_map_count,
.maxlen = sizeof(sysctl_max_map_count),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ZERO,
},
#else
{
.procname = "nr_trim_pages",
.data = &sysctl_nr_trim_pages,
.maxlen = sizeof(sysctl_nr_trim_pages),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ZERO,
},
#endif
{
.procname = "vfs_cache_pressure",
.data = &sysctl_vfs_cache_pressure,
.maxlen = sizeof(sysctl_vfs_cache_pressure),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ZERO,
},
#if defined(HAVE_ARCH_PICK_MMAP_LAYOUT) || \
defined(CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
{
.procname = "legacy_va_layout",
.data = &sysctl_legacy_va_layout,
.maxlen = sizeof(sysctl_legacy_va_layout),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ZERO,
},
#endif
#ifdef CONFIG_NUMA
{
.procname = "zone_reclaim_mode",
.data = &node_reclaim_mode,
.maxlen = sizeof(node_reclaim_mode),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ZERO,
},
#endif
#ifdef CONFIG_SMP
{
.procname = "stat_interval",
.data = &sysctl_stat_interval,
.maxlen = sizeof(sysctl_stat_interval),
.mode = 0644,
.proc_handler = proc_dointvec_jiffies,
},
{
.procname = "stat_refresh",
.data = NULL,
.maxlen = 0,
.mode = 0600,
.proc_handler = vmstat_refresh,
},
#endif
#ifdef CONFIG_MMU
{
.procname = "mmap_min_addr",
.data = &dac_mmap_min_addr,
.maxlen = sizeof(unsigned long),
.mode = 0644,
.proc_handler = mmap_min_addr_handler,
},
#endif
#if (defined(CONFIG_X86_32) && !defined(CONFIG_UML))|| \
(defined(CONFIG_SUPERH) && defined(CONFIG_VSYSCALL))
{
.procname = "vdso_enabled",
#ifdef CONFIG_X86_32
.data = &vdso32_enabled,
.maxlen = sizeof(vdso32_enabled),
#else
.data = &vdso_enabled,
.maxlen = sizeof(vdso_enabled),
#endif
.mode = 0644,
.proc_handler = proc_dointvec,
.extra1 = SYSCTL_ZERO,
},
#endif
{
.procname = "user_reserve_kbytes",
.data = &sysctl_user_reserve_kbytes,
.maxlen = sizeof(sysctl_user_reserve_kbytes),
.mode = 0644,
.proc_handler = proc_doulongvec_minmax,
},
{
.procname = "admin_reserve_kbytes",
.data = &sysctl_admin_reserve_kbytes,
.maxlen = sizeof(sysctl_admin_reserve_kbytes),
.mode = 0644,
.proc_handler = proc_doulongvec_minmax,
},
#ifdef CONFIG_HAVE_ARCH_MMAP_RND_BITS
{
.procname = "mmap_rnd_bits",
.data = &mmap_rnd_bits,
.maxlen = sizeof(mmap_rnd_bits),
.mode = 0600,
.proc_handler = proc_dointvec_minmax,
.extra1 = (void *)&mmap_rnd_bits_min,
.extra2 = (void *)&mmap_rnd_bits_max,
},
#endif
#ifdef CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS
{
.procname = "mmap_rnd_compat_bits",
.data = &mmap_rnd_compat_bits,
.maxlen = sizeof(mmap_rnd_compat_bits),
.mode = 0600,
.proc_handler = proc_dointvec_minmax,
.extra1 = (void *)&mmap_rnd_compat_bits_min,
.extra2 = (void *)&mmap_rnd_compat_bits_max,
},
#endif
};
int __init sysctl_init_bases(void)
{
register_sysctl_init("kernel", kern_table);
register_sysctl_init("vm", vm_table);
return 0;
}
#endif /* CONFIG_SYSCTL */
/*
* No sense putting this after each symbol definition, twice,
* exception granted :-)
*/
EXPORT_SYMBOL(proc_dobool);
EXPORT_SYMBOL(proc_dointvec);
EXPORT_SYMBOL(proc_douintvec);
EXPORT_SYMBOL(proc_dointvec_jiffies);
EXPORT_SYMBOL(proc_dointvec_minmax);
EXPORT_SYMBOL_GPL(proc_douintvec_minmax);
EXPORT_SYMBOL(proc_dointvec_userhz_jiffies);
EXPORT_SYMBOL(proc_dointvec_ms_jiffies);
EXPORT_SYMBOL(proc_dostring);
EXPORT_SYMBOL(proc_doulongvec_minmax);
EXPORT_SYMBOL(proc_doulongvec_ms_jiffies_minmax);
EXPORT_SYMBOL(proc_do_large_bitmap);