mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
synced 2024-12-28 16:52:18 +00:00
6d5a2dda9b
Mark of the Unicorn released 896 mk3 FireWire in 2008 as part of the third
generation of its FireWire series. In 2011, 896 mk3 hybrid was released to
support USB protocol.
It supports sampling transfer frequency up to 192.0 kHz. The packet
format differs depending on both of current sampling transfer frequency
and the type of signal in optical interfaces. The model supports
transmission of PCM frames as well as MIDI messages.
The 896 mk3 FireWire consists of below ICs:
* Texas Instruments TSB41AB2
* Xilinx Spartan-3A FPGA, XC3S500E
* Texas Instruments TMS320C6722
* Microchip (Atmel) AT91SAM SAM7S256
It supports sampling transfer frequency up to 192.0 kHz. The packet
format differs depending on both of current sampling transfer frequency
and the type of signal in two pairs of optical interfaces. The model
supports transmission of PCM frames, while has no port for MIDi messages.
The model supports command mechanism to configure internal DSP. Hardware
meter information is available in the first 2 chunks of each data block
of tx packet.
This commit adds support for it. The 896 mk3 FireWire is just tested, but
the 896 mk3 Hybrid is not yet.
$ config-rom-pretty-printer < motu-896mk3fw.img
ROM header and bus information block
-----------------------------------------------------------------
1024 04100ce1 bus_info_length 4, crc_length 16, crc 3297
1028 31333934 bus_name "1394"
1032 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
1036 0001f200 company_id 0001f2 |
1040 00093add device_id 0000604893 | EUI-64 0547556791237341
root directory
-----------------------------------------------------------------
1044 0004ef04 directory_length 4, crc 61188
1048 030001f2 vendor
1052 0c0083c0 node capabilities: per IEEE 1394
1056 d1000002 --> unit directory at 1064
1060 8d000005 --> eui-64 leaf at 1080
unit directory at 1064
-----------------------------------------------------------------
1064 0003998d directory_length 3, crc 39309
1068 120001f2 specifier id
1072 13000017 version
1076 17101800 model
eui-64 leaf at 1080
-----------------------------------------------------------------
1080 0002cc82 leaf_length 2, crc 52354
1084 0001f200 company_id 0001f2 |
1088 00093add device_id 0000604893 | EUI-64 0547556791237341
$ config-rom-pretty-printer < motu-896mk3hybrid.img
ROM header and bus information block
-----------------------------------------------------------------
1024 04103cbe bus_info_length 4, crc_length 16, crc 15550
1028 31333934 bus_name "1394"
1032 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
1036 0001f200 company_id 0001f2 |
1040 000ae601 device_id 0000714241 | EUI-64 0547556791346689
root directory
-----------------------------------------------------------------
1044 0004ef04 directory_length 4, crc 61188
1048 030001f2 vendor
1052 0c0083c0 node capabilities: per IEEE 1394
1056 d1000002 --> unit directory at 1064
1060 8d000005 --> eui-64 leaf at 1080
unit directory at 1064
-----------------------------------------------------------------
1064 000394ac directory_length 3, crc 38060
1068 120001f2 specifier id
1072 13000037 version
1076 17102800 model
eui-64 leaf at 1080
-----------------------------------------------------------------
1080 0002cf69 leaf_length 2, crc 53097
1084 0001f200 company_id 0001f2 |
1088 000ae601 device_id 0000714241 | EUI-64 0547556791346689
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20240129022711.254383-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
203 lines
6.1 KiB
Plaintext
203 lines
6.1 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
menuconfig SND_FIREWIRE
|
|
bool "FireWire sound devices"
|
|
depends on FIREWIRE
|
|
default y
|
|
help
|
|
Support for IEEE-1394/FireWire/iLink sound devices.
|
|
|
|
if SND_FIREWIRE && FIREWIRE
|
|
|
|
config SND_FIREWIRE_LIB
|
|
tristate
|
|
select SND_PCM
|
|
select SND_RAWMIDI
|
|
|
|
config SND_DICE
|
|
tristate "DICE-based DACs support"
|
|
select SND_HWDEP
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for devices based on the DICE chip family
|
|
(DICE-II/TCD2210(Mini)/TCD2220(Jr.)) which TC Applied Technologies (TCAT) produced.
|
|
* Allen and Heath Zed R16
|
|
* Alesis iO 14/26 FireWire, MasterControl, MultiMix 8/12/16 FireWire
|
|
* Avid Mbox 3 Pro
|
|
* FlexRadio Systems FLEX-3000, FLEX-5000
|
|
* Focusrite Liquid Saffire 56
|
|
* Focusrite Saffire Pro 14, Pro 24, Pro 24 DSP, Pro 26, Pro 40(TCD2220)
|
|
* Harman Music Group Lexicon I-ONIX FW810S
|
|
* Loud Technologies Mackie Onyx Blackbird, Onyx 820i/1220i/1620i/1640i (latter models)
|
|
* M-Audio ProFire 610/2626
|
|
* Mytek Stereo192-DSD DAC
|
|
* Midas Klark Teknik VeniceF series
|
|
* PreSonus FireStudio, FireStudio Mobile, FireStudio Project, FireStudio Tube
|
|
* PreSonus StudioLive 16.4.2, 16.0.2, 24.4.2, 32.4.2
|
|
* Solid State Logic Duende Classic, Duende Mini
|
|
* TC Electronic Studio Konnekt 48, Konnekt 24D, Konnekt Live, Impact Twin
|
|
* TC Electronic Digital Konnekt x32, Desktop Konnekt 6
|
|
* Weiss Engineering ADC2, Vesta, Minerva, AFI1, DAC1, INT202, DAC202
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-dice.
|
|
|
|
config SND_OXFW
|
|
tristate "Oxford Semiconductor FW970/971 chipset support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based on
|
|
Oxford Semiconductor FW970/971 chipset.
|
|
* Griffin Firewave
|
|
* LaCie Firewire Speakers
|
|
* Behringer F-Control Audio 202
|
|
* Mackie(Loud) Onyx-i series (former models)
|
|
* Mackie(Loud) Onyx 1640i (former model)
|
|
* Mackie(Loud) Onyx Satellite
|
|
* Mackie(Loud) Tapco Link.Firewire
|
|
* Mackie(Loud) d.2 pro/d.4 pro (built-in FireWire card with OXFW971 ASIC)
|
|
* Mackie(Loud) U.420/U.420d
|
|
* TASCAM FireOne
|
|
* Stanton Controllers & Systems 1 Deck/Mixer
|
|
* APOGEE duet FireWire
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-oxfw.
|
|
|
|
config SND_ISIGHT
|
|
tristate "Apple iSight microphone"
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for the front and rear microphones
|
|
of the Apple iSight web camera.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-isight.
|
|
|
|
config SND_FIREWORKS
|
|
tristate "Echo Fireworks board module support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based
|
|
on Echo Digital Audio Fireworks board:
|
|
* Mackie Onyx 400F/1200F
|
|
* Echo AudioFire12/8(until 2009 July)
|
|
* Echo AudioFire2/4/Pre8/8(since 2009 July)
|
|
* Echo Fireworks 8/HDMI
|
|
* Gibson Robot Interface Pack/GoldTop
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-fireworks.
|
|
|
|
config SND_BEBOB
|
|
tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based
|
|
on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware:
|
|
* Edirol FA-66/FA-101
|
|
* PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
|
|
* BridgeCo RDAudio1/Audio5
|
|
* Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
|
|
* Mackie d.2 (optional FireWire card with DM1000 ASIC)
|
|
* Stanton FinalScratch 2 (ScratchAmp)
|
|
* Tascam IF-FW/DM
|
|
* Behringer XENIX UFX 1204/1604
|
|
* Behringer Digital Mixer X32 series (X-UF Card)
|
|
* Behringer FCA610/1616
|
|
* Apogee Rosetta 200/400 (X-FireWire card)
|
|
* Apogee DA/AD/DD-16X (X-FireWire card)
|
|
* Apogee Ensemble
|
|
* ESI QuataFire 610
|
|
* AcousticReality eARMasterOne
|
|
* CME MatrixKFW
|
|
* Phonic Helix Board 12 MkII/18 MkII/24 MkII
|
|
* Phonic Helix Board 12 Universal/18 Universal/24 Universal
|
|
* Lynx Aurora 8/16 (LT-FW)
|
|
* ICON FireXon
|
|
* PrismSound Orpheus/ADA-8XR
|
|
* TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW
|
|
* TerraTec EWS MIC2/EWS MIC8
|
|
* TerraTec Aureon 7.1 FireWire
|
|
* Yamaha GO44/GO46
|
|
* Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO
|
|
* M-Audio FireWire410/AudioPhile/Solo
|
|
* M-Audio Ozonic/NRV10/ProfireLightBridge
|
|
* M-Audio FireWire 1814/ProjectMix IO
|
|
* Digidesign Mbox 2 Pro
|
|
* ToneWeal FW66
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-bebob.
|
|
|
|
config SND_FIREWIRE_DIGI00X
|
|
tristate "Digidesign Digi 002/003 family support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for Digidesign Digi 002/003 family.
|
|
* Digi 002 Console
|
|
* Digi 002 Rack
|
|
* Digi 003 Console
|
|
* Digi 003 Rack
|
|
* Digi 003 Rack+
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-firewire-digi00x.
|
|
|
|
config SND_FIREWIRE_TASCAM
|
|
tristate "TASCAM FireWire series support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for TASCAM.
|
|
* FW-1884
|
|
* FW-1082
|
|
* FW-1804
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-firewire-tascam.
|
|
|
|
config SND_FIREWIRE_MOTU
|
|
tristate "Mark of the unicorn FireWire series support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to enable support for FireWire devices which MOTU produced:
|
|
* 828
|
|
* 896
|
|
* 828mk2
|
|
* 896hd
|
|
* Traveler
|
|
* Ultralite
|
|
* 8pre
|
|
* 828mk3 (FireWire only)
|
|
* 828mk3 (Hybrid)
|
|
* 896mk3 (FireWire only)
|
|
* 896mk3 (Hybrid)
|
|
* Ultralite mk3 (FireWire only)
|
|
* Ultralite mk3 (Hybrid)
|
|
* Traveler mk3
|
|
* Audio Express
|
|
* Track 16
|
|
* 4pre
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-firewire-motu.
|
|
|
|
config SND_FIREFACE
|
|
tristate "RME Fireface series support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for RME fireface series.
|
|
* Fireface 400
|
|
* Fireface 800
|
|
* Fireface UFX
|
|
* Fireface UCX
|
|
* Fireface 802
|
|
|
|
endif # SND_FIREWIRE
|