Johannes Thumshirn 01ba8d6af4 tty: serial: men_z135_uart: Fix driver for changes in hardware
16z135 IP Core has changed so the driver needs to be updated to respect
these changes. The following changes have been made:

* Don't invert the 16z135 modem status register when reading.
* Add module parameter to configure the (baud rate dependent) RX timeout.
  Character timeout in seconds = (timeout_reg * baud_reg * 4)/freq_reg.
* Enable the handling of UART core's automatic flow control feature.
  When AFE is active disable generation of modem status IRQs.
* Rework the handling of IRQs to be conform with newer FPGA versions and
  take precautions not to miss an interrupt because of the destructive read
  of the IIR register.
* Correct men_z135_handle_modem_status(), MSR is stat_reg[15:8] not
  stat_reg[7:0]
* Correct calling of uart_handle_{dcd,cts}_change()
* Reset CLOCAL when CRTSCTS is set

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02 10:11:27 -08:00
..
2014-12-14 16:10:09 -08:00
2011-03-31 11:26:23 -03:00
2013-12-08 16:56:05 -08:00
2015-02-02 10:11:27 -08:00
2015-02-02 10:11:27 -08:00
2015-02-02 10:11:27 -08:00
2014-11-05 20:18:30 -08:00