Stuart Swales e2d435ea40 [SCSI] initio: fix module hangs on loading
I've verified (on my Initio 9100 with a DAT drive) that the
2.6.24-rc8-git6 initio module still hangs on loading.

These fixes (other than the printk) are needed to get the module to load
ok (and work correctly) with my adapter & tape drive.

a) printk cosmetic fix

b) cblk->sglen needs setting for later DMA I/O routines to use

c) host->bios_addr needs setting for debug output correctness

d) semaph & semaph_lock initialisation had got lost since 2.6.22

e) since 2.6.22 the bios data address was truncated to 16 bits (needs 20
when shifted left)

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 17:07:33 -06:00
..
2007-11-14 18:45:44 -08:00
2007-10-31 15:21:35 +00:00
2007-04-01 10:10:04 -05:00
2008-01-14 08:52:22 -08:00
2006-09-12 17:12:31 -05:00
2006-09-12 17:12:31 -05:00
2007-10-24 08:55:40 +02:00
2007-05-06 09:33:11 -05:00
2007-10-12 14:51:56 -04:00
2007-10-22 21:19:53 +02:00
2006-09-12 17:12:31 -05:00
2007-10-22 21:19:53 +02:00
2007-10-22 21:19:53 +02:00
2007-10-22 21:19:53 +02:00
2007-10-22 21:19:53 +02:00
2007-10-12 14:51:44 -04:00
2007-05-31 17:30:04 -04:00
2006-09-12 17:12:31 -05:00
2007-10-19 11:53:42 -07:00
2007-10-22 21:19:53 +02:00
2007-10-16 11:14:19 +02:00
2007-07-18 11:16:32 -05:00
2007-07-14 19:12:15 -05:00
2007-07-31 10:44:01 -05:00
2007-10-24 08:55:40 +02:00
2007-05-31 17:30:04 -04:00
2006-11-15 16:43:50 -06:00
2007-10-16 11:24:44 +02:00
2007-10-19 23:22:55 +02:00
2007-10-22 21:19:53 +02:00