linux-next

mirror of https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git synced 2025-01-14 09:47:20 +00:00

History

Shaohui Xie e1bd5d8bc1 powerpc/85xx: P3041DS - change espi input-clock from 40MHz to 35MHz

Default CoreNet Coherency Bus (CCB) frequency on P3041 is 750MHz, but espi
cannot work at 40MHz with this CCB frequency, so we need to slow down the
clock rate of espi to 35MHz to make it work stable at the CCB frequency.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2012-07-26 08:09:53 -05:00

dts

powerpc/85xx: P3041DS - change espi input-clock from 40MHz to 35MHz

2012-07-26 08:09:53 -05:00

.gitignore

powerpc: Random little legacy iSeries removal tidy ups

2012-03-28 11:33:23 +11:00

4xx.c

powerpc/44x: Fix UART clocks on 440SPe

2010-05-12 07:48:49 -04:00

4xx.h

powerpc/405ex: provide necessary fixup function to support cuImage

2009-08-31 09:20:55 -04:00

44x.h

[POWERPC] cuimage for Bamboo board

2007-09-19 21:13:16 -05:00

addnote.c

powerpc: Use static const char arrays

2010-10-13 16:19:03 +11:00

bamboo.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cpm-serial.c

[POWERPC] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram.

2008-04-17 01:01:37 -05:00

crt0.S

powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN

2011-04-20 16:59:20 +10:00

crtsavres.S

[POWERPC] Fix bootwrapper builds with newer gcc versions

2008-06-16 15:00:52 +10:00

cuboot-8xx.c

[POWERPC] Use embedded libfdt in the bootwrapper

2007-12-11 13:46:14 +11:00

cuboot-52xx.c

powerpc/52xx: Make cuImage more robust in locating immr node.

2008-10-15 11:09:59 -06:00

cuboot-83xx.c

[POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias

2008-01-23 19:32:47 -06:00

cuboot-85xx-cpm2.c

[POWERPC] Add a cuboot wrapper for 85xx with CPM2

2008-01-27 14:10:36 -06:00

cuboot-85xx.c

powerpc/85xx: cuboot - Fix up ethernet3 MAC address on MPC85xx

2009-06-15 21:45:32 -05:00

cuboot-824x.c

[POWERPC] Add initial iomega StorCenter board port.

2008-01-23 19:54:36 -06:00

cuboot-acadia.c

powerpc/40x: Add cuboot wrapper for Acadia board

2008-10-17 10:31:19 -04:00

cuboot-amigaone.c

powerpc/amigaone: Bootwrapper and serial console support for AmigaOne

2009-02-11 16:00:09 +11:00

cuboot-bamboo.c

[POWERPC] 4xx: Use correct board info structure in cuboot wrappers

2008-02-28 08:16:27 -06:00

cuboot-c2k.c

powerpc: Boot code for the C2K

2008-06-09 13:42:25 +10:00

cuboot-ebony.c

[POWERPC] 4xx: Use correct board info structure in cuboot wrappers

2008-02-28 08:16:27 -06:00

cuboot-hotfoot.c

powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC

2009-08-31 09:15:51 -04:00

cuboot-katmai.c

[POWERPC] 4xx: Use correct board info structure in cuboot wrappers

2008-02-28 08:16:27 -06:00

cuboot-kilauea.c

powerpc/405ex: support cuImage via included dtb

2009-08-31 09:23:22 -04:00

cuboot-mpc7448hpc2.c

[POWERPC] bootwrapper: Build multiple cuImages

2008-02-07 11:40:19 +11:00

cuboot-pq2.c

[POWERPC] cuboot-pq2: PCI fixes

2008-04-17 01:01:40 -05:00

cuboot-rainier.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cuboot-sam440ep.c

powerpc/4xx: Sam440ep support

2008-06-11 08:32:49 -04:00

cuboot-sequoia.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cuboot-taishan.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cuboot-warp.c

powerpc/44x: Warp patches for the new NDFC driver

2009-01-20 08:17:21 -05:00

cuboot-yosemite.c

[POWERPC] 4xx: Add bootwrapper for AMCC Yosemite board

2008-03-26 07:19:17 -05:00

cuboot.c

[POWERPC] bootwrapper: Move linker symbols into ops.h

2007-08-22 15:27:28 +10:00

cuboot.h

[POWERPC] Consolidate cuboot initialization code

2007-06-14 22:30:16 +10:00

dcr.h

powerpc/boot: Add mfdcrx

2011-12-09 07:49:50 -05:00

devtree.c

powerpc/bootwrapper: Use the child-bus #address-cells to decide which range entry to use

2008-12-21 14:21:17 +11:00

div64.S

powerpc/boot: Add extended precision shifts to the boot wrapper.

2011-12-09 07:49:27 -05:00

dummy.c

powerpc/32: Generate miboot images with ARCH=powerpc

2006-01-15 13:00:08 +11:00

ebony.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

elf_util.c

powerpc: Make the 64-bit kernel as a position-independent executable

2008-09-15 11:08:38 -07:00

elf.h

[POWERPC] Move bootwrapper ELF parsing routines to a file

2007-04-13 03:55:16 +10:00

ep88xc.c

[POWERPC] Use embedded libfdt in the bootwrapper

2007-12-11 13:46:14 +11:00

ep405.c

[POWERPC] 4xx: EP405 boards support for arch/powerpc

2007-12-23 13:13:14 -06:00

ep8248e.c

[POWERPC] 82xx: Embedded Planet EP8248E support

2008-01-23 19:34:43 -06:00

epapr.c

powerpc/boot: Add an ePAPR compliant boot wrapper

2011-04-20 16:59:21 +10:00

fixed-head.S

[POWERPC] 8xx/wrapper: Embedded Planet EP88xC support

2007-10-04 11:02:40 -05:00

fsl-soc.c

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

fsl-soc.h

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

gamecube-head.S

powerpc: gamecube: bootwrapper bits

2009-12-12 22:24:26 -07:00

gamecube.c

powerpc: gamecube: bootwrapper bits

2009-12-12 22:24:26 -07:00

gunzip_util.c

[POWERPC] boot: Simplify gunzip_finish

2007-10-03 11:48:43 +10:00

gunzip_util.h

[POWERPC] Add documentation for the zImage's gunzip convenience functions

2007-03-16 16:38:19 +11:00

hack-coff.c

powerpc: Make COFF zImages for old 32-bit powermacs

2006-01-14 15:04:06 +11:00

holly.c

[POWERPC] Use embedded libfdt in the bootwrapper

2007-12-11 13:46:14 +11:00

install.sh

kbuild: use INSTALLKERNEL to select customized installkernel script

2009-09-20 12:18:14 +02:00

io.h

powerpc: Move include files to arch/powerpc/include/asm

2008-08-04 12:02:00 +10:00

libfdt_env.h

powerpc: Update in-kernel dtc and libfdt to version 1.2.0

2008-08-20 16:34:58 +10:00

libfdt-wrapper.c

powerpc/boot: Allocate more memory for dtb

2008-11-06 09:49:43 +11:00

main.c

powerpc: Fix format string warning in arch/powerpc/boot/main.c

2008-10-31 20:14:19 +11:00

Makefile

powerpc: remove Wind River SBC8560 support

2012-07-10 07:07:21 -05:00

mktree.c

powerpc: use consistent types in mktree

2009-08-20 10:29:30 +10:00

mpc8xx.c

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

mpc8xx.h

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

mpc52xx-psc.c

[POWERPC] Add bootwrapper function to get virtual reg from the device tree.

2008-04-17 01:01:37 -05:00

mpsc.c

[POWERPC] prpmc2800: Clean up dts properties

2008-04-15 21:21:24 +10:00

mv64x60_i2c.c

[POWERPC] mv64x60: Remove device tree absolute path references

2008-04-15 21:21:24 +10:00

mv64x60.c

[POWERPC] mv64x60: Remove device tree absolute path references

2008-04-15 21:21:24 +10:00

mv64x60.h

[POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge

2007-05-12 11:32:49 +10:00

ns16550.c

[POWERPC] Xilinx: boot support for Xilinx uart 16550.

2008-04-24 13:32:46 -05:00

of.c

[POWERPC] bootwrapper: Move linker symbols into ops.h

2007-08-22 15:27:28 +10:00

of.h

[POWERPC] Make more OF-related bootwrapper functions available to non-OF platforms

2007-06-28 19:19:28 +10:00

ofconsole.c

[POWERPC] Make more OF-related bootwrapper functions available to non-OF platforms

2007-06-28 19:19:28 +10:00

oflib.c

powerpc: Change the default link address for pSeries zImage kernels

2008-07-01 11:28:32 +10:00

ops.h

powerpc: Add del_node() for early boot code to prune inapplicable devices.

2008-10-22 15:01:21 +11:00

page.h

powerpc: Move ppc64 boot wrapper code over to arch/powerpc

2005-11-16 13:52:21 +11:00

planetcore.c

[POWERPC] bootwrapper: Add PlanetCore firmware support

2007-10-03 11:48:43 +10:00

planetcore.h

[POWERPC] bootwrapper: Add PlanetCore firmware support

2007-10-03 11:48:43 +10:00

ppc_asm.h

powerpc: Move ppc64 boot wrapper code over to arch/powerpc

2005-11-16 13:52:21 +11:00

ppcboot-hotfoot.h

powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC

2009-08-31 09:15:51 -04:00

ppcboot.h

[POWERPC] bootwrapper: Add TARGET_HAS_ETHn tests to ppcboot.h

2007-08-22 15:21:48 +10:00

pq2.c

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

pq2.h

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

prpmc2800.c

[POWERPC] mv64x60: Remove device tree absolute path references

2008-04-15 21:21:24 +10:00

ps3-head.S

[POWERPC] PS3: Bootwrapper improvements

2008-04-01 20:43:07 +11:00

ps3-hvcall.S

[POWERPC] PS3: Fix bootwrapper hang bug

2008-02-14 22:11:01 +11:00

ps3.c

[POWERPC] PS3: Bootwrapper improvements

2008-04-01 20:43:07 +11:00

README

powerpc: Move ppc64 boot wrapper code over to arch/powerpc

2005-11-16 13:52:21 +11:00

redboot-8xx.c

[POWERPC] 8xx: Analogue & Micro Adder875 board support.

2008-01-23 19:34:40 -06:00

redboot-83xx.c

[POWERPC] 83xx: Add support for Analogue & Micro ASP837E board

2008-06-02 14:44:25 -05:00

redboot.h

[POWERPC] 8xx: Analogue & Micro Adder875 board support.

2008-01-23 19:34:40 -06:00

reg.h

[POWERPC] 4xx: Add mfspr/mtspr inline macros to 4xx bootwrapper

2007-12-23 13:14:22 -06:00

rs6000.h

powerpc: Make COFF zImages for old 32-bit powermacs

2006-01-14 15:04:06 +11:00

serial.c

powerpc/amigaone: Bootwrapper and serial console support for AmigaOne

2009-02-11 16:00:09 +11:00

simple_alloc.c

[POWERPC] bootwrapper: Use `unsigned long' for malloc sizes

2007-04-24 22:06:54 +10:00

simpleboot.c

Move dtc and libfdt sources from arch/powerpc/boot to scripts/dtc

2009-05-02 16:52:26 -07:00

stdio.c

[POWERPC] Add u64 printf to bootwrapper

2007-06-28 19:16:48 +10:00

stdio.h

[POWERPC] Add gcc format warnings to zImage printf()

2007-03-26 15:11:20 +10:00

stdlib.c

[POWERPC] bootwrapper: Add strtoull()

2007-09-14 01:33:23 +10:00

stdlib.h

[POWERPC] bootwrapper: Add strtoull()

2007-09-14 01:33:23 +10:00

string.h

[POWERPC] Add memchr() to the bootwrapper

2007-10-12 14:13:44 +10:00

string.S

powerpc: Fix boot wrapper memcmp() called with zero length argument

2008-10-21 15:17:48 +11:00

treeboot-bamboo.c

[POWERPC] cuimage for Bamboo board

2007-09-19 21:13:16 -05:00

treeboot-currituck.c

powerpc/47x: Add support for the new IBM currituck platform

2011-12-09 07:51:40 -05:00

treeboot-ebony.c

[POWERPC] bootwrapper: Move linker symbols into ops.h

2007-08-22 15:27:28 +10:00

treeboot-iss4xx.c

powerpc/44x: boot wrapper: allow kernel to load into non-zero address

2011-07-12 09:34:41 -04:00

treeboot-walnut.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

types.h

[POWERPC] Add signed types to bootwrapper

2007-06-28 19:16:47 +10:00

uartlite.c

[POWERPC] Uartlite: bootwrapper bug fix, getc loops forever

2007-10-10 09:14:35 -06:00

ugecon.c

powerpc/gamecube/wii: Fix off-by-one error in ugecon/usbgecko_udbg

2009-12-18 15:13:57 +11:00

ugecon.h

powerpc: gamecube/wii: usbgecko bootwrapper console support

2009-12-12 22:24:26 -07:00

util.S

[POWERPC] Add non-OF serial console support

2006-10-23 12:49:19 +10:00

virtex405-head.S

[POWERPC] bootwrapper: Add a firmware-independent simpleboot target.

2008-04-02 20:36:11 -05:00

virtex.c

powerpc/virtex: Fix booting of Xilinx FPGAs with 16550 for 405 and 440

2008-07-04 00:58:59 -06:00

wii-head.S

powerpc: wii: bootwrapper bits

2009-12-12 22:24:29 -07:00

wii.c

wii: bootwrapper: add fixup to calc useable mem2

2009-12-12 22:24:31 -07:00

wrapper

powerpc/ps3: Do not adjust the wrapper load address

2012-03-21 11:16:13 +11:00

zImage.coff.lds.S

powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN

2011-04-20 16:59:20 +10:00

zImage.lds.S

powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN

2011-04-20 16:59:20 +10:00

zImage.ps3.lds.S

[POWERPC] PS3: Bootwrapper support.

2007-07-10 21:56:40 +10:00

README

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter