linux-next/drivers/acpi/pci_root.c
Linus Torvalds e1ba84597c PCI changes for the v3.14 merge window:
Resource management
     - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
     - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
     - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
     - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
     - Enforce bus address limits in resource allocation (Yinghai Lu)
     - Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
     - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)
 
   PCI device hotplug
     - Major rescan/remove locking update (Rafael J. Wysocki)
     - Make ioapic builtin only (not modular) (Yinghai Lu)
     - Fix release/free issues (Yinghai Lu)
     - Clean up pciehp (Bjorn Helgaas)
     - Announce pciehp slot info during enumeration (Bjorn Helgaas)
 
   MSI
     - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
     - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
     - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
     - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
     - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)
 
   SR-IOV
     - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)
 
   Virtualization
     - Add support for save/restore of extended capabilities (Alex Williamson)
     - Add Virtual Channel to save/restore support (Alex Williamson)
     - Never treat a VF as a multifunction device (Alex Williamson)
     - Add pci_try_reset_function(), et al (Alex Williamson)
 
   AER
     - Ignore non-PCIe error sources (Betty Dall)
     - Support ACPI HEST error sources for domains other than 0 (Betty Dall)
     - Consolidate HEST error source parsers (Bjorn Helgaas)
     - Add a TLP header print helper (Borislav Petkov)
 
   Freescale i.MX6
     - Remove unnecessary code (Fabio Estevam)
     - Make reset-gpio optional (Marek Vasut)
     - Report "link up" only after link training completes (Marek Vasut)
     - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
     - Fix PCIe startup code (Richard Zhu)
 
   Marvell MVEBU
     - Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
     - Drop writes to bridge Secondary Status register (Jason Gunthorpe)
     - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
     - Support a bridge with no IO port window (Jason Gunthorpe)
     - Use max_t() instead of max(resource_size_t,) (Jingoo Han)
     - Remove redundant of_match_ptr (Sachin Kamat)
     - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)
 
   NVIDIA Tegra
     - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)
 
   Renesas R-Car
     - Add runtime PM support (Valentine Barshak)
     - Fix rcar_pci_probe() return value check (Wei Yongjun)
 
   Synopsys DesignWare
     - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
     - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
     - Fix missing MSI IRQs (Harro Haan)
     - Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
     - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
     - Whitespace cleanup (Jingoo Han)
 
   EISA
     - Call put_device() if device_register() fails (Levente Kurusa)
     - Revert EISA initialization breakage ((Bjorn Helgaas)
 
   Miscellaneous
     - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
     - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
     - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
     - Use dev_is_pci() to identify PCI devices (Yijing Wang)
     - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
     - Update documentation 00-INDEX (Erik Ekman)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS3ujEAAoJEFmIoMA60/r8A4EQAK9AZSUSVNWvlKdC1PrBfT3w
 7fVILx5A4KWsOU8eoFwCPQLrgvUtMltg16yN2tbCjqpKEdrVc36biMO9bwhnXSyZ
 KopHKMWnn0sza/z2H8mcGy+0azGdWcIjcErX/a8WeS6zyWBjm+yzckrHNVpPu4Ca
 SpCBhfgBMjKyIZyLtP6juFSH34S2DfQex4oUSyPC+gjqPy5wW/xw/kBxZfOXl+yU
 P9pQT+geMIc31pETMdG9wd/TT+47YAui4ieSggoVxfVrphCXv6S8mOMCMuQc2bAy
 MHy9uFm1jbvKZZIYrzJ+9HFiiU/6MNiOO3Ygua52xuSp1Zrcjwi2CLD9/QBXbDVs
 pTKU5JIO7q43llkQUpIXTwBvEApSZRhuqzXegsMAYIg4AWmbfm/2fXkfWlQThYMp
 J48blAJZ4t0vhMr9usgwbtdBe8F5euExOxpwH0QMCMABbuu8/B3TLm39+LTcIbsw
 Efgm3N9iUTyiV5fe9Rr62nflhyqXjTevPl4wbZZe4OOdm0MXZY+/BzuNJhg3wyY8
 QKz2J3FB6OR7BCLHCp80l50s5+Ih4F5kmOXwFKjT1D1MFRaNaPDmp9BY6TitU6hg
 zj55gP4c8x6n3alakbf972Yhgs/4oi1va8cZL+pCYWb8nPO5ldaMiT7QBBLUreQV
 BtDtC7u/AFWJ5e73+jVO
 =La1R
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.14 merge window:

  Resource management
    - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
    - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
    - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
    - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
    - Enforce bus address limits in resource allocation (Yinghai Lu)
    - Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
    - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)

  PCI device hotplug
    - Major rescan/remove locking update (Rafael J. Wysocki)
    - Make ioapic builtin only (not modular) (Yinghai Lu)
    - Fix release/free issues (Yinghai Lu)
    - Clean up pciehp (Bjorn Helgaas)
    - Announce pciehp slot info during enumeration (Bjorn Helgaas)

  MSI
    - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
    - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
    - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
    - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
    - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)

  SR-IOV
    - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)

  Virtualization
    - Add support for save/restore of extended capabilities (Alex Williamson)
    - Add Virtual Channel to save/restore support (Alex Williamson)
    - Never treat a VF as a multifunction device (Alex Williamson)
    - Add pci_try_reset_function(), et al (Alex Williamson)

  AER
    - Ignore non-PCIe error sources (Betty Dall)
    - Support ACPI HEST error sources for domains other than 0 (Betty Dall)
    - Consolidate HEST error source parsers (Bjorn Helgaas)
    - Add a TLP header print helper (Borislav Petkov)

  Freescale i.MX6
    - Remove unnecessary code (Fabio Estevam)
    - Make reset-gpio optional (Marek Vasut)
    - Report "link up" only after link training completes (Marek Vasut)
    - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
    - Fix PCIe startup code (Richard Zhu)

  Marvell MVEBU
    - Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
    - Drop writes to bridge Secondary Status register (Jason Gunthorpe)
    - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
    - Support a bridge with no IO port window (Jason Gunthorpe)
    - Use max_t() instead of max(resource_size_t,) (Jingoo Han)
    - Remove redundant of_match_ptr (Sachin Kamat)
    - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)

  NVIDIA Tegra
    - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)

  Renesas R-Car
    - Add runtime PM support (Valentine Barshak)
    - Fix rcar_pci_probe() return value check (Wei Yongjun)

  Synopsys DesignWare
    - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
    - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
    - Fix missing MSI IRQs (Harro Haan)
    - Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
    - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
    - Whitespace cleanup (Jingoo Han)

  EISA
    - Call put_device() if device_register() fails (Levente Kurusa)
    - Revert EISA initialization breakage ((Bjorn Helgaas)

  Miscellaneous
    - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
    - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
    - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
    - Use dev_is_pci() to identify PCI devices (Yijing Wang)
    - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
    - Update documentation 00-INDEX (Erik Ekman)"

* tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits)
  Revert "EISA: Initialize device before its resources"
  Revert "EISA: Log device resources in dmesg"
  vfio-pci: Use pci "try" reset interface
  PCI: Check parent kobject in pci_destroy_dev()
  xen/pcifront: Use global PCI rescan-remove locking
  powerpc/eeh: Use global PCI rescan-remove locking
  PCI: Fix pci_check_and_unmask_intx() comment typos
  PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()
  MPT / PCI: Use pci_stop_and_remove_bus_device_locked()
  platform / x86: Use global PCI rescan-remove locking
  PCI: hotplug: Use global PCI rescan-remove locking
  pcmcia: Use global PCI rescan-remove locking
  ACPI / hotplug / PCI: Use global PCI rescan-remove locking
  ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug
  PCI: Add global pci_lock_rescan_remove()
  PCI: Cleanup pci.h whitespace
  PCI: Reorder so actual code comes before stubs
  PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0
  ACPICA: Add helper macros to extract bus/segment numbers from HEST table.
  PCI: Make local functions static
  ...
2014-01-22 16:39:28 -08:00

746 lines
19 KiB
C

/*
* pci_root.c - ACPI PCI Root Bridge Driver ($Revision: 40 $)
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/pci.h>
#include <linux/pci-acpi.h>
#include <linux/pci-aspm.h>
#include <linux/acpi.h>
#include <linux/slab.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include <acpi/apei.h>
#include "internal.h"
#define PREFIX "ACPI: "
#define _COMPONENT ACPI_PCI_COMPONENT
ACPI_MODULE_NAME("pci_root");
#define ACPI_PCI_ROOT_CLASS "pci_bridge"
#define ACPI_PCI_ROOT_DEVICE_NAME "PCI Root Bridge"
static int acpi_pci_root_add(struct acpi_device *device,
const struct acpi_device_id *not_used);
static void acpi_pci_root_remove(struct acpi_device *device);
#define ACPI_PCIE_REQ_SUPPORT (OSC_PCI_EXT_CONFIG_SUPPORT \
| OSC_PCI_ASPM_SUPPORT \
| OSC_PCI_CLOCK_PM_SUPPORT \
| OSC_PCI_MSI_SUPPORT)
static const struct acpi_device_id root_device_ids[] = {
{"PNP0A03", 0},
{"", 0},
};
static struct acpi_scan_handler pci_root_handler = {
.ids = root_device_ids,
.attach = acpi_pci_root_add,
.detach = acpi_pci_root_remove,
.hotplug = {
.ignore = true,
},
};
static DEFINE_MUTEX(osc_lock);
/**
* acpi_is_root_bridge - determine whether an ACPI CA node is a PCI root bridge
* @handle - the ACPI CA node in question.
*
* Note: we could make this API take a struct acpi_device * instead, but
* for now, it's more convenient to operate on an acpi_handle.
*/
int acpi_is_root_bridge(acpi_handle handle)
{
int ret;
struct acpi_device *device;
ret = acpi_bus_get_device(handle, &device);
if (ret)
return 0;
ret = acpi_match_device_ids(device, root_device_ids);
if (ret)
return 0;
else
return 1;
}
EXPORT_SYMBOL_GPL(acpi_is_root_bridge);
static acpi_status
get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
{
struct resource *res = data;
struct acpi_resource_address64 address;
acpi_status status;
status = acpi_resource_to_address64(resource, &address);
if (ACPI_FAILURE(status))
return AE_OK;
if ((address.address_length > 0) &&
(address.resource_type == ACPI_BUS_NUMBER_RANGE)) {
res->start = address.minimum;
res->end = address.minimum + address.address_length - 1;
}
return AE_OK;
}
static acpi_status try_get_root_bridge_busnr(acpi_handle handle,
struct resource *res)
{
acpi_status status;
res->start = -1;
status =
acpi_walk_resources(handle, METHOD_NAME__CRS,
get_root_bridge_busnr_callback, res);
if (ACPI_FAILURE(status))
return status;
if (res->start == -1)
return AE_ERROR;
return AE_OK;
}
struct pci_osc_bit_struct {
u32 bit;
char *desc;
};
static struct pci_osc_bit_struct pci_osc_support_bit[] = {
{ OSC_PCI_EXT_CONFIG_SUPPORT, "ExtendedConfig" },
{ OSC_PCI_ASPM_SUPPORT, "ASPM" },
{ OSC_PCI_CLOCK_PM_SUPPORT, "ClockPM" },
{ OSC_PCI_SEGMENT_GROUPS_SUPPORT, "Segments" },
{ OSC_PCI_MSI_SUPPORT, "MSI" },
};
static struct pci_osc_bit_struct pci_osc_control_bit[] = {
{ OSC_PCI_EXPRESS_NATIVE_HP_CONTROL, "PCIeHotplug" },
{ OSC_PCI_SHPC_NATIVE_HP_CONTROL, "SHPCHotplug" },
{ OSC_PCI_EXPRESS_PME_CONTROL, "PME" },
{ OSC_PCI_EXPRESS_AER_CONTROL, "AER" },
{ OSC_PCI_EXPRESS_CAPABILITY_CONTROL, "PCIeCapability" },
};
static void decode_osc_bits(struct acpi_pci_root *root, char *msg, u32 word,
struct pci_osc_bit_struct *table, int size)
{
char buf[80];
int i, len = 0;
struct pci_osc_bit_struct *entry;
buf[0] = '\0';
for (i = 0, entry = table; i < size; i++, entry++)
if (word & entry->bit)
len += snprintf(buf + len, sizeof(buf) - len, "%s%s",
len ? " " : "", entry->desc);
dev_info(&root->device->dev, "_OSC: %s [%s]\n", msg, buf);
}
static void decode_osc_support(struct acpi_pci_root *root, char *msg, u32 word)
{
decode_osc_bits(root, msg, word, pci_osc_support_bit,
ARRAY_SIZE(pci_osc_support_bit));
}
static void decode_osc_control(struct acpi_pci_root *root, char *msg, u32 word)
{
decode_osc_bits(root, msg, word, pci_osc_control_bit,
ARRAY_SIZE(pci_osc_control_bit));
}
static u8 pci_osc_uuid_str[] = "33DB4D5B-1FF7-401C-9657-7441C03DD766";
static acpi_status acpi_pci_run_osc(acpi_handle handle,
const u32 *capbuf, u32 *retval)
{
struct acpi_osc_context context = {
.uuid_str = pci_osc_uuid_str,
.rev = 1,
.cap.length = 12,
.cap.pointer = (void *)capbuf,
};
acpi_status status;
status = acpi_run_osc(handle, &context);
if (ACPI_SUCCESS(status)) {
*retval = *((u32 *)(context.ret.pointer + 8));
kfree(context.ret.pointer);
}
return status;
}
static acpi_status acpi_pci_query_osc(struct acpi_pci_root *root,
u32 support,
u32 *control)
{
acpi_status status;
u32 result, capbuf[3];
support &= OSC_PCI_SUPPORT_MASKS;
support |= root->osc_support_set;
capbuf[OSC_QUERY_DWORD] = OSC_QUERY_ENABLE;
capbuf[OSC_SUPPORT_DWORD] = support;
if (control) {
*control &= OSC_PCI_CONTROL_MASKS;
capbuf[OSC_CONTROL_DWORD] = *control | root->osc_control_set;
} else {
/* Run _OSC query only with existing controls. */
capbuf[OSC_CONTROL_DWORD] = root->osc_control_set;
}
status = acpi_pci_run_osc(root->device->handle, capbuf, &result);
if (ACPI_SUCCESS(status)) {
root->osc_support_set = support;
if (control)
*control = result;
}
return status;
}
static acpi_status acpi_pci_osc_support(struct acpi_pci_root *root, u32 flags)
{
acpi_status status;
mutex_lock(&osc_lock);
status = acpi_pci_query_osc(root, flags, NULL);
mutex_unlock(&osc_lock);
return status;
}
struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle)
{
struct acpi_pci_root *root;
struct acpi_device *device;
if (acpi_bus_get_device(handle, &device) ||
acpi_match_device_ids(device, root_device_ids))
return NULL;
root = acpi_driver_data(device);
return root;
}
EXPORT_SYMBOL_GPL(acpi_pci_find_root);
struct acpi_handle_node {
struct list_head node;
acpi_handle handle;
};
/**
* acpi_get_pci_dev - convert ACPI CA handle to struct pci_dev
* @handle: the handle in question
*
* Given an ACPI CA handle, the desired PCI device is located in the
* list of PCI devices.
*
* If the device is found, its reference count is increased and this
* function returns a pointer to its data structure. The caller must
* decrement the reference count by calling pci_dev_put().
* If no device is found, %NULL is returned.
*/
struct pci_dev *acpi_get_pci_dev(acpi_handle handle)
{
int dev, fn;
unsigned long long adr;
acpi_status status;
acpi_handle phandle;
struct pci_bus *pbus;
struct pci_dev *pdev = NULL;
struct acpi_handle_node *node, *tmp;
struct acpi_pci_root *root;
LIST_HEAD(device_list);
/*
* Walk up the ACPI CA namespace until we reach a PCI root bridge.
*/
phandle = handle;
while (!acpi_is_root_bridge(phandle)) {
node = kzalloc(sizeof(struct acpi_handle_node), GFP_KERNEL);
if (!node)
goto out;
INIT_LIST_HEAD(&node->node);
node->handle = phandle;
list_add(&node->node, &device_list);
status = acpi_get_parent(phandle, &phandle);
if (ACPI_FAILURE(status))
goto out;
}
root = acpi_pci_find_root(phandle);
if (!root)
goto out;
pbus = root->bus;
/*
* Now, walk back down the PCI device tree until we return to our
* original handle. Assumes that everything between the PCI root
* bridge and the device we're looking for must be a P2P bridge.
*/
list_for_each_entry(node, &device_list, node) {
acpi_handle hnd = node->handle;
status = acpi_evaluate_integer(hnd, "_ADR", NULL, &adr);
if (ACPI_FAILURE(status))
goto out;
dev = (adr >> 16) & 0xffff;
fn = adr & 0xffff;
pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn));
if (!pdev || hnd == handle)
break;
pbus = pdev->subordinate;
pci_dev_put(pdev);
/*
* This function may be called for a non-PCI device that has a
* PCI parent (eg. a disk under a PCI SATA controller). In that
* case pdev->subordinate will be NULL for the parent.
*/
if (!pbus) {
dev_dbg(&pdev->dev, "Not a PCI-to-PCI bridge\n");
pdev = NULL;
break;
}
}
out:
list_for_each_entry_safe(node, tmp, &device_list, node)
kfree(node);
return pdev;
}
EXPORT_SYMBOL_GPL(acpi_get_pci_dev);
/**
* acpi_pci_osc_control_set - Request control of PCI root _OSC features.
* @handle: ACPI handle of a PCI root bridge (or PCIe Root Complex).
* @mask: Mask of _OSC bits to request control of, place to store control mask.
* @req: Mask of _OSC bits the control of is essential to the caller.
*
* Run _OSC query for @mask and if that is successful, compare the returned
* mask of control bits with @req. If all of the @req bits are set in the
* returned mask, run _OSC request for it.
*
* The variable at the @mask address may be modified regardless of whether or
* not the function returns success. On success it will contain the mask of
* _OSC bits the BIOS has granted control of, but its contents are meaningless
* on failure.
**/
acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 *mask, u32 req)
{
struct acpi_pci_root *root;
acpi_status status = AE_OK;
u32 ctrl, capbuf[3];
if (!mask)
return AE_BAD_PARAMETER;
ctrl = *mask & OSC_PCI_CONTROL_MASKS;
if ((ctrl & req) != req)
return AE_TYPE;
root = acpi_pci_find_root(handle);
if (!root)
return AE_NOT_EXIST;
mutex_lock(&osc_lock);
*mask = ctrl | root->osc_control_set;
/* No need to evaluate _OSC if the control was already granted. */
if ((root->osc_control_set & ctrl) == ctrl)
goto out;
/* Need to check the available controls bits before requesting them. */
while (*mask) {
status = acpi_pci_query_osc(root, root->osc_support_set, mask);
if (ACPI_FAILURE(status))
goto out;
if (ctrl == *mask)
break;
decode_osc_control(root, "platform does not support",
ctrl & ~(*mask));
ctrl = *mask;
}
if ((ctrl & req) != req) {
decode_osc_control(root, "not requesting control; platform does not support",
req & ~(ctrl));
status = AE_SUPPORT;
goto out;
}
capbuf[OSC_QUERY_DWORD] = 0;
capbuf[OSC_SUPPORT_DWORD] = root->osc_support_set;
capbuf[OSC_CONTROL_DWORD] = ctrl;
status = acpi_pci_run_osc(handle, capbuf, mask);
if (ACPI_SUCCESS(status))
root->osc_control_set = *mask;
out:
mutex_unlock(&osc_lock);
return status;
}
EXPORT_SYMBOL(acpi_pci_osc_control_set);
static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
int *clear_aspm)
{
u32 support, control, requested;
acpi_status status;
struct acpi_device *device = root->device;
acpi_handle handle = device->handle;
/*
* All supported architectures that use ACPI have support for
* PCI domains, so we indicate this in _OSC support capabilities.
*/
support = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
if (pci_ext_cfg_avail())
support |= OSC_PCI_EXT_CONFIG_SUPPORT;
if (pcie_aspm_support_enabled())
support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT;
if (pci_msi_enabled())
support |= OSC_PCI_MSI_SUPPORT;
decode_osc_support(root, "OS supports", support);
status = acpi_pci_osc_support(root, support);
if (ACPI_FAILURE(status)) {
dev_info(&device->dev, "_OSC failed (%s); disabling ASPM\n",
acpi_format_exception(status));
*no_aspm = 1;
return;
}
if (pcie_ports_disabled) {
dev_info(&device->dev, "PCIe port services disabled; not requesting _OSC control\n");
return;
}
if ((support & ACPI_PCIE_REQ_SUPPORT) != ACPI_PCIE_REQ_SUPPORT) {
decode_osc_support(root, "not requesting OS control; OS requires",
ACPI_PCIE_REQ_SUPPORT);
return;
}
control = OSC_PCI_EXPRESS_CAPABILITY_CONTROL
| OSC_PCI_EXPRESS_NATIVE_HP_CONTROL
| OSC_PCI_EXPRESS_PME_CONTROL;
if (pci_aer_available()) {
if (aer_acpi_firmware_first())
dev_info(&device->dev,
"PCIe AER handled by firmware\n");
else
control |= OSC_PCI_EXPRESS_AER_CONTROL;
}
requested = control;
status = acpi_pci_osc_control_set(handle, &control,
OSC_PCI_EXPRESS_CAPABILITY_CONTROL);
if (ACPI_SUCCESS(status)) {
decode_osc_control(root, "OS now controls", control);
if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) {
/*
* We have ASPM control, but the FADT indicates
* that it's unsupported. Clear it.
*/
*clear_aspm = 1;
}
} else {
decode_osc_control(root, "OS requested", requested);
decode_osc_control(root, "platform willing to grant", control);
dev_info(&device->dev, "_OSC failed (%s); disabling ASPM\n",
acpi_format_exception(status));
/*
* We want to disable ASPM here, but aspm_disabled
* needs to remain in its state from boot so that we
* properly handle PCIe 1.1 devices. So we set this
* flag here, to defer the action until after the ACPI
* root scan.
*/
*no_aspm = 1;
}
}
static int acpi_pci_root_add(struct acpi_device *device,
const struct acpi_device_id *not_used)
{
unsigned long long segment, bus;
acpi_status status;
int result;
struct acpi_pci_root *root;
acpi_handle handle = device->handle;
int no_aspm = 0, clear_aspm = 0;
root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
if (!root)
return -ENOMEM;
segment = 0;
status = acpi_evaluate_integer(handle, METHOD_NAME__SEG, NULL,
&segment);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
dev_err(&device->dev, "can't evaluate _SEG\n");
result = -ENODEV;
goto end;
}
/* Check _CRS first, then _BBN. If no _BBN, default to zero. */
root->secondary.flags = IORESOURCE_BUS;
status = try_get_root_bridge_busnr(handle, &root->secondary);
if (ACPI_FAILURE(status)) {
/*
* We need both the start and end of the downstream bus range
* to interpret _CBA (MMCONFIG base address), so it really is
* supposed to be in _CRS. If we don't find it there, all we
* can do is assume [_BBN-0xFF] or [0-0xFF].
*/
root->secondary.end = 0xFF;
dev_warn(&device->dev,
FW_BUG "no secondary bus range in _CRS\n");
status = acpi_evaluate_integer(handle, METHOD_NAME__BBN,
NULL, &bus);
if (ACPI_SUCCESS(status))
root->secondary.start = bus;
else if (status == AE_NOT_FOUND)
root->secondary.start = 0;
else {
dev_err(&device->dev, "can't evaluate _BBN\n");
result = -ENODEV;
goto end;
}
}
root->device = device;
root->segment = segment & 0xFFFF;
strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
device->driver_data = root;
pr_info(PREFIX "%s [%s] (domain %04x %pR)\n",
acpi_device_name(device), acpi_device_bid(device),
root->segment, &root->secondary);
root->mcfg_addr = acpi_pci_root_get_mcfg_addr(handle);
negotiate_os_control(root, &no_aspm, &clear_aspm);
/*
* TBD: Need PCI interface for enumeration/configuration of roots.
*/
/*
* Scan the Root Bridge
* --------------------
* Must do this prior to any attempt to bind the root device, as the
* PCI namespace does not get created until this call is made (and
* thus the root bridge's pci_dev does not exist).
*/
root->bus = pci_acpi_scan_root(root);
if (!root->bus) {
dev_err(&device->dev,
"Bus %04x:%02x not present in PCI namespace\n",
root->segment, (unsigned int)root->secondary.start);
device->driver_data = NULL;
result = -ENODEV;
goto end;
}
if (clear_aspm) {
dev_info(&device->dev, "Disabling ASPM (FADT indicates it is unsupported)\n");
pcie_clear_aspm(root->bus);
}
if (no_aspm)
pcie_no_aspm();
pci_acpi_add_bus_pm_notifier(device, root->bus);
if (device->wakeup.flags.run_wake)
device_set_run_wake(root->bus->bridge, true);
if (system_state != SYSTEM_BOOTING) {
pcibios_resource_survey_bus(root->bus);
pci_assign_unassigned_root_bus_resources(root->bus);
}
pci_lock_rescan_remove();
pci_bus_add_devices(root->bus);
pci_unlock_rescan_remove();
return 1;
end:
kfree(root);
return result;
}
static void acpi_pci_root_remove(struct acpi_device *device)
{
struct acpi_pci_root *root = acpi_driver_data(device);
pci_lock_rescan_remove();
pci_stop_root_bus(root->bus);
device_set_run_wake(root->bus->bridge, false);
pci_acpi_remove_bus_pm_notifier(device);
pci_remove_root_bus(root->bus);
pci_unlock_rescan_remove();
kfree(root);
}
void __init acpi_pci_root_init(void)
{
acpi_hest_init();
if (!acpi_pci_disabled) {
pci_acpi_crs_quirks();
acpi_scan_add_handler(&pci_root_handler);
}
}
/* Support root bridge hotplug */
static void handle_root_bridge_insertion(acpi_handle handle)
{
struct acpi_device *device;
if (!acpi_bus_get_device(handle, &device)) {
dev_printk(KERN_DEBUG, &device->dev,
"acpi device already exists; ignoring notify\n");
return;
}
if (acpi_bus_scan(handle))
acpi_handle_err(handle, "cannot add bridge to acpi list\n");
}
static void hotplug_event_root(void *data, u32 type)
{
acpi_handle handle = data;
struct acpi_pci_root *root;
acpi_scan_lock_acquire();
root = acpi_pci_find_root(handle);
switch (type) {
case ACPI_NOTIFY_BUS_CHECK:
/* bus enumerate */
acpi_handle_printk(KERN_DEBUG, handle,
"Bus check notify on %s\n", __func__);
if (root)
acpiphp_check_host_bridge(handle);
else
handle_root_bridge_insertion(handle);
break;
case ACPI_NOTIFY_DEVICE_CHECK:
/* device check */
acpi_handle_printk(KERN_DEBUG, handle,
"Device check notify on %s\n", __func__);
if (!root)
handle_root_bridge_insertion(handle);
break;
case ACPI_NOTIFY_EJECT_REQUEST:
/* request device eject */
acpi_handle_printk(KERN_DEBUG, handle,
"Device eject notify on %s\n", __func__);
if (!root)
break;
get_device(&root->device->dev);
acpi_scan_lock_release();
acpi_bus_device_eject(root->device, ACPI_NOTIFY_EJECT_REQUEST);
return;
default:
acpi_handle_warn(handle,
"notify_handler: unknown event type 0x%x\n",
type);
break;
}
acpi_scan_lock_release();
}
static void handle_hotplug_event_root(acpi_handle handle, u32 type,
void *context)
{
acpi_hotplug_execute(hotplug_event_root, handle, type);
}
static acpi_status __init
find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
{
acpi_status status;
int *count = (int *)context;
if (!acpi_is_root_bridge(handle))
return AE_OK;
(*count)++;
status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
handle_hotplug_event_root, NULL);
if (ACPI_FAILURE(status))
acpi_handle_printk(KERN_DEBUG, handle,
"notify handler is not installed, exit status: %u\n",
(unsigned int)status);
else
acpi_handle_printk(KERN_DEBUG, handle,
"notify handler is installed\n");
return AE_OK;
}
void __init acpi_pci_root_hp_init(void)
{
int num = 0;
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, find_root_bridges, NULL, &num, NULL);
printk(KERN_DEBUG "Found %d acpi root devices\n", num);
}