Wei Yongjun fa4c115ca5 iio: common: ssp_sensors: accel: use devm_iio_device_register() ...

Use devm_iio_device_register() for IIO subsystem device
registration and delete the remove function since there
is no need after this change.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

2017-01-28 12:15:22 +00:00

..

accel

iio: common: ssp_sensors: accel: use devm_iio_device_register()

2017-01-28 12:15:22 +00:00

adc

iio: adc: Add Renesas GyroADC driver

2017-01-28 11:33:53 +00:00

amplifiers

spi: Updates for v4.4

2015-11-05 13:15:12 -08:00

buffer

iio:buffer.h - split into buffer.h and buffer_impl.h

2017-01-10 19:54:55 +00:00

chemical

iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value

2016-10-23 22:18:27 +01:00

common

First round of new device support, features and cleanups for IIO in the 4.11 cycle.

2017-01-19 10:40:44 +01:00

counter

iio: 104-quad-8: Fix active level mismatch for the preset enable option

2016-12-03 10:08:09 +00:00

dac

iio: dac: ad5593r: Add ACPI support

2016-12-30 17:20:14 +00:00

dummy

iio:dummy: Stop enabling timestamp by default.

2017-01-10 19:54:55 +00:00

frequency

iio: frequency: ad9523: use unsigned int rather then bare unsigned

2016-04-17 10:31:03 +01:00

gyro

iio:kfifo_buf header include push down.

2017-01-10 19:54:53 +00:00

health

iio: health: max30100: use msleep() for long uncritical delays

2017-01-22 13:21:28 +00:00

humidity

iio: humidity: Support acpi probe for hts211

2016-12-03 08:56:28 +00:00

imu

Second round of IIO new device support, cleanups and features for the 4.11 cycle

2017-01-23 09:23:23 +01:00

light

Second round of IIO new device support, cleanups and features for the 4.11 cycle

2017-01-23 09:23:23 +01:00

magnetometer

iio: magnetometer: mag3110: claim direct mode during raw writes

2017-01-21 12:20:40 +00:00

orientation

iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)

2016-11-05 17:47:47 +00:00

potentiometer

iio: max5481: Add support for Maxim digital potentiometers

2017-01-28 12:13:31 +00:00

potentiostat

iio: potentiostat: add LMP91000 support

2016-09-27 20:33:03 +01:00

pressure

iio: pressure: ms5611: claim direct mode during oversampling changes

2017-01-21 12:31:05 +00:00

proximity

iio: proximity: sx9500: claim direct mode during raw proximity reads

2017-01-21 12:21:53 +00:00

temperature

iio:temperature: Add support for TI TMP007 sensor

2017-01-14 10:45:05 +00:00

trigger

Second round of IIO new device support, cleanups and features for the 4.11 cycle

2017-01-23 09:23:23 +01:00

iio_core_trigger.h

iio: fix semicolon in io_core_trigger.h

2013-08-03 18:40:32 +01:00

iio_core.h

iio:core: timestamping clock selection support

2016-06-30 19:41:38 +01:00

industrialio-buffer.c

iio:buffer.h - split into buffer.h and buffer_impl.h

2017-01-10 19:54:55 +00:00

industrialio-configfs.c

iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem

2015-12-05 16:25:30 +00:00

industrialio-core.c

iio:buffer.h - split into buffer.h and buffer_impl.h

2017-01-10 19:54:55 +00:00

industrialio-event.c

iio: iio_push_event(): Don't crash if the event interface is not registered

2016-09-10 16:40:44 +01:00

industrialio-sw-device.c

iio: Add support for creating IIO devices via configfs

2016-05-04 11:43:54 +01:00

industrialio-sw-trigger.c

iio: core: fix ptr_ret.cocci warnings

2016-01-20 17:09:18 -08:00

industrialio-trigger.c

iio: trigger: clean up viio_trigger_alloc()

2017-01-22 13:37:34 +00:00

industrialio-triggered-event.c

iio: Support triggered events

2015-08-27 20:47:09 +01:00

inkern.c

iio: inkern: pass through raw values if no scaling

2017-01-14 12:20:18 +00:00

Kconfig

iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8

2016-10-01 17:06:21 +01:00

Makefile

iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8

2016-10-01 17:06:21 +01:00