linux-stable/kernel/crash_core.c

673 lines
18 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-only
crash: move crashkernel parsing and vmcore related code under CONFIG_CRASH_CORE Patch series "kexec/fadump: remove dependency with CONFIG_KEXEC and reuse crashkernel parameter for fadump", v4. Traditionally, kdump is used to save vmcore in case of a crash. Some architectures like powerpc can save vmcore using architecture specific support instead of kexec/kdump mechanism. Such architecture specific support also needs to reserve memory, to be used by dump capture kernel. crashkernel parameter can be a reused, for memory reservation, by such architecture specific infrastructure. This patchset removes dependency with CONFIG_KEXEC for crashkernel parameter and vmcoreinfo related code as it can be reused without kexec support. Also, crashkernel parameter is reused instead of fadump_reserve_mem to reserve memory for fadump. The first patch moves crashkernel parameter parsing and vmcoreinfo related code under CONFIG_CRASH_CORE instead of CONFIG_KEXEC_CORE. The second patch reuses the definitions of append_elf_note() & final_note() functions under CONFIG_CRASH_CORE in IA64 arch code. The third patch removes dependency on CONFIG_KEXEC for firmware-assisted dump (fadump) in powerpc. The next patch reuses crashkernel parameter for reserving memory for fadump, instead of the fadump_reserve_mem parameter. This has the advantage of using all syntaxes crashkernel parameter supports, for fadump as well. The last patch updates fadump kernel documentation about use of crashkernel parameter. This patch (of 5): Traditionally, kdump is used to save vmcore in case of a crash. Some architectures like powerpc can save vmcore using architecture specific support instead of kexec/kdump mechanism. Such architecture specific support also needs to reserve memory, to be used by dump capture kernel. crashkernel parameter can be a reused, for memory reservation, by such architecture specific infrastructure. But currently, code related to vmcoreinfo and parsing of crashkernel parameter is built under CONFIG_KEXEC_CORE. This patch introduces CONFIG_CRASH_CORE and moves the above mentioned code under this config, allowing code reuse without dependency on CONFIG_KEXEC. There is no functional change with this patch. Link: http://lkml.kernel.org/r/149035338104.6881.4550894432615189948.stgit@hbathini.in.ibm.com Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 22:56:18 +00:00
/*
* crash.c - kernel crash support code.
* Copyright (C) 2002-2004 Eric Biederman <ebiederm@xmission.com>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/buildid.h>
#include <linux/init.h>
crash: move crashkernel parsing and vmcore related code under CONFIG_CRASH_CORE Patch series "kexec/fadump: remove dependency with CONFIG_KEXEC and reuse crashkernel parameter for fadump", v4. Traditionally, kdump is used to save vmcore in case of a crash. Some architectures like powerpc can save vmcore using architecture specific support instead of kexec/kdump mechanism. Such architecture specific support also needs to reserve memory, to be used by dump capture kernel. crashkernel parameter can be a reused, for memory reservation, by such architecture specific infrastructure. This patchset removes dependency with CONFIG_KEXEC for crashkernel parameter and vmcoreinfo related code as it can be reused without kexec support. Also, crashkernel parameter is reused instead of fadump_reserve_mem to reserve memory for fadump. The first patch moves crashkernel parameter parsing and vmcoreinfo related code under CONFIG_CRASH_CORE instead of CONFIG_KEXEC_CORE. The second patch reuses the definitions of append_elf_note() & final_note() functions under CONFIG_CRASH_CORE in IA64 arch code. The third patch removes dependency on CONFIG_KEXEC for firmware-assisted dump (fadump) in powerpc. The next patch reuses crashkernel parameter for reserving memory for fadump, instead of the fadump_reserve_mem parameter. This has the advantage of using all syntaxes crashkernel parameter supports, for fadump as well. The last patch updates fadump kernel documentation about use of crashkernel parameter. This patch (of 5): Traditionally, kdump is used to save vmcore in case of a crash. Some architectures like powerpc can save vmcore using architecture specific support instead of kexec/kdump mechanism. Such architecture specific support also needs to reserve memory, to be used by dump capture kernel. crashkernel parameter can be a reused, for memory reservation, by such architecture specific infrastructure. But currently, code related to vmcoreinfo and parsing of crashkernel parameter is built under CONFIG_KEXEC_CORE. This patch introduces CONFIG_CRASH_CORE and moves the above mentioned code under this config, allowing code reuse without dependency on CONFIG_KEXEC. There is no functional change with this patch. Link: http://lkml.kernel.org/r/149035338104.6881.4550894432615189948.stgit@hbathini.in.ibm.com Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 22:56:18 +00:00
#include <linux/utsname.h>
#include <linux/vmalloc.h>
#include <linux/sizes.h>
crash: move a few code bits to setup support of crash hotplug Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28. Once the kdump service is loaded, if changes to CPUs or memory occur, either by hot un/plug or off/onlining, the crash elfcorehdr must also be updated. The elfcorehdr describes to kdump the CPUs and memory in the system, and any inaccuracies can result in a vmcore with missing CPU context or memory regions. The current solution utilizes udev to initiate an unload-then-reload of the kdump image (eg. kernel, initrd, boot_params, purgatory and elfcorehdr) by the userspace kexec utility. In the original post I outlined the significant performance problems related to offloading this activity to userspace. This patchset introduces a generic crash handler that registers with the CPU and memory notifiers. Upon CPU or memory changes, from either hot un/plug or off/onlining, this generic handler is invoked and performs important housekeeping, for example obtaining the appropriate lock, and then invokes an architecture specific handler to do the appropriate elfcorehdr update. Note the description in patch 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that enables further optimizations related to CPU plug/unplug/online/offline performance of elfcorehdr updates. In the case of x86_64, the arch specific handler generates a new elfcorehdr, and overwrites the old one in memory; thus no involvement with userspace needed. To realize the benefits/test this patchset, one must make a couple of minor changes to userspace: - Prevent udev from updating kdump crash kernel on hot un/plug changes. Add the following as the first lines to the RHEL udev rule file /usr/lib/udev/rules.d/98-kexec.rules: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" With this changeset applied, the two rules evaluate to false for CPU and memory change events and thus skip the userspace unload-then-reload of kdump. - Change to the kexec_file_load for loading the kdump kernel: Eg. on RHEL: in /usr/bin/kdumpctl, change to: standard_kexec_args="-p -d -s" which adds the -s to select kexec_file_load() syscall. This kernel patchset also supports kexec_load() with a modified kexec userspace utility. A working changeset to the kexec userspace utility is posted to the kexec-tools mailing list here: http://lists.infradead.org/pipermail/kexec/2023-May/027049.html To use the kexec-tools patch, apply, build and install kexec-tools, then change the kdumpctl's standard_kexec_args to replace the -s with --hotplug. The removal of -s reverts to the kexec_load syscall and the addition of --hotplug invokes the changes put forth in the kexec-tools patch. This patch (of 8): The crash hotplug support leans on the work for the kexec_file_load() syscall. To also support the kexec_load() syscall, a few bits of code need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are moved out of kexec_file.c and into a common location crash_core.c. In addition, struct crash_mem and crash_notes were moved to new locales so that PROC_KCORE, which sets CRASH_CORE alone, builds correctly. No functionality change intended. Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:39 +00:00
#include <linux/kexec.h>
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
#include <linux/memory.h>
2024-01-24 05:12:44 +00:00
#include <linux/mm.h>
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
#include <linux/cpuhotplug.h>
#include <linux/memblock.h>
#include <linux/kmemleak.h>
2024-01-24 05:12:44 +00:00
#include <linux/crash_core.h>
#include <linux/reboot.h>
#include <linux/btf.h>
#include <linux/objtool.h>
crash: move crashkernel parsing and vmcore related code under CONFIG_CRASH_CORE Patch series "kexec/fadump: remove dependency with CONFIG_KEXEC and reuse crashkernel parameter for fadump", v4. Traditionally, kdump is used to save vmcore in case of a crash. Some architectures like powerpc can save vmcore using architecture specific support instead of kexec/kdump mechanism. Such architecture specific support also needs to reserve memory, to be used by dump capture kernel. crashkernel parameter can be a reused, for memory reservation, by such architecture specific infrastructure. This patchset removes dependency with CONFIG_KEXEC for crashkernel parameter and vmcoreinfo related code as it can be reused without kexec support. Also, crashkernel parameter is reused instead of fadump_reserve_mem to reserve memory for fadump. The first patch moves crashkernel parameter parsing and vmcoreinfo related code under CONFIG_CRASH_CORE instead of CONFIG_KEXEC_CORE. The second patch reuses the definitions of append_elf_note() & final_note() functions under CONFIG_CRASH_CORE in IA64 arch code. The third patch removes dependency on CONFIG_KEXEC for firmware-assisted dump (fadump) in powerpc. The next patch reuses crashkernel parameter for reserving memory for fadump, instead of the fadump_reserve_mem parameter. This has the advantage of using all syntaxes crashkernel parameter supports, for fadump as well. The last patch updates fadump kernel documentation about use of crashkernel parameter. This patch (of 5): Traditionally, kdump is used to save vmcore in case of a crash. Some architectures like powerpc can save vmcore using architecture specific support instead of kexec/kdump mechanism. Such architecture specific support also needs to reserve memory, to be used by dump capture kernel. crashkernel parameter can be a reused, for memory reservation, by such architecture specific infrastructure. But currently, code related to vmcoreinfo and parsing of crashkernel parameter is built under CONFIG_KEXEC_CORE. This patch introduces CONFIG_CRASH_CORE and moves the above mentioned code under this config, allowing code reuse without dependency on CONFIG_KEXEC. There is no functional change with this patch. Link: http://lkml.kernel.org/r/149035338104.6881.4550894432615189948.stgit@hbathini.in.ibm.com Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 22:56:18 +00:00
#include <asm/page.h>
#include <asm/sections.h>
#include <crypto/sha1.h>
kdump: append kernel build-id string to VMCOREINFO Make kernel GNU build-id available in VMCOREINFO. Having build-id in VMCOREINFO facilitates presenting appropriate kernel namelist image with debug information file to kernel crash dump analysis tools. Currently VMCOREINFO lacks uniquely identifiable key for crash analysis automation. Regarding if this patch is necessary or matching of linux_banner and OSRELEASE in VMCOREINFO employed by crash(8) meets the need -- IMO, build-id approach more foolproof, in most instances it is a cryptographic hash generated using internal code/ELF bits unlike kernel version string upon which linux_banner is based that is external to the code. I feel each is intended for a different purpose. Also OSRELEASE is not suitable when two different kernel builds from same version with different features enabled. Currently for most linux (and non-linux) systems build-id can be extracted using standard methods for file types such as user mode crash dumps, shared libraries, loadable kernel modules etc., This is an exception for linux kernel dump. Having build-id in VMCOREINFO brings some uniformity for automation tools. Tyler said: : I think this is a nice improvement over today's linux_banner approach for : correlating vmlinux to a kernel dump. : : The elf notes parsing in this patch lines up with what is described in in : the "Notes (Nhdr)" section of the elf(5) man page. : : BUILD_ID_MAX is sufficient to hold a sha1 build-id, which is the default : build-id type today in GNU ld(2). It is also sufficient to hold the : "fast" build-id, which is the default build-id type today in LLVM lld(2). Signed-off-by: Vijay Balakrishna <vijayb@linux.microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Link: http://lkml.kernel.org/r/1591849672-34104-1-git-send-email-vijayb@linux.microsoft.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:36:33 +00:00
vmcoreinfo: include kallsyms symbols The internal kallsyms tables contain information which could be quite useful to a debugging tool in the absence of other debuginfo. If kallsyms is enabled, then a debugging tool could parse it and use it as a fallback symbol table. Combined with BTF data, live & post-mortem debuggers can support basic operations without needing a large DWARF debuginfo file available. As many as five symbols are necessary to properly parse kallsyms names and addresses. Add these to the vmcoreinfo note. CONFIG_KALLSYMS_ABSOLUTE_PERCPU does impact the computation of symbol addresses. However, a debugger can infer this configuration value by comparing the address of _stext in the vmcoreinfo with the address computed via kallsyms. So there's no need to include information about this config value in the vmcoreinfo note. To verify that we're still well below the maximum of 4096 bytes, I created a script[1] to compute a rough upper bound on the possible size of vmcoreinfo. On v5.18-rc7, the script reports 3106 bytes, and with this patch, the maximum become 3370 bytes. [1]: https://github.com/brenns10/kernel_stuff/blob/master/vmcoreinfosize/ Link: https://lkml.kernel.org/r/20220517000508.777145-3-stephen.s.brennan@oracle.com Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Bixuan Cui <cuibixuan@huawei.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Vernet <void@manifault.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-17 00:05:08 +00:00
#include "kallsyms_internal.h"
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
#include "kexec_internal.h"
vmcoreinfo: include kallsyms symbols The internal kallsyms tables contain information which could be quite useful to a debugging tool in the absence of other debuginfo. If kallsyms is enabled, then a debugging tool could parse it and use it as a fallback symbol table. Combined with BTF data, live & post-mortem debuggers can support basic operations without needing a large DWARF debuginfo file available. As many as five symbols are necessary to properly parse kallsyms names and addresses. Add these to the vmcoreinfo note. CONFIG_KALLSYMS_ABSOLUTE_PERCPU does impact the computation of symbol addresses. However, a debugger can infer this configuration value by comparing the address of _stext in the vmcoreinfo with the address computed via kallsyms. So there's no need to include information about this config value in the vmcoreinfo note. To verify that we're still well below the maximum of 4096 bytes, I created a script[1] to compute a rough upper bound on the possible size of vmcoreinfo. On v5.18-rc7, the script reports 3106 bytes, and with this patch, the maximum become 3370 bytes. [1]: https://github.com/brenns10/kernel_stuff/blob/master/vmcoreinfosize/ Link: https://lkml.kernel.org/r/20220517000508.777145-3-stephen.s.brennan@oracle.com Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Bixuan Cui <cuibixuan@huawei.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Vernet <void@manifault.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-17 00:05:08 +00:00
crash: move a few code bits to setup support of crash hotplug Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28. Once the kdump service is loaded, if changes to CPUs or memory occur, either by hot un/plug or off/onlining, the crash elfcorehdr must also be updated. The elfcorehdr describes to kdump the CPUs and memory in the system, and any inaccuracies can result in a vmcore with missing CPU context or memory regions. The current solution utilizes udev to initiate an unload-then-reload of the kdump image (eg. kernel, initrd, boot_params, purgatory and elfcorehdr) by the userspace kexec utility. In the original post I outlined the significant performance problems related to offloading this activity to userspace. This patchset introduces a generic crash handler that registers with the CPU and memory notifiers. Upon CPU or memory changes, from either hot un/plug or off/onlining, this generic handler is invoked and performs important housekeeping, for example obtaining the appropriate lock, and then invokes an architecture specific handler to do the appropriate elfcorehdr update. Note the description in patch 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that enables further optimizations related to CPU plug/unplug/online/offline performance of elfcorehdr updates. In the case of x86_64, the arch specific handler generates a new elfcorehdr, and overwrites the old one in memory; thus no involvement with userspace needed. To realize the benefits/test this patchset, one must make a couple of minor changes to userspace: - Prevent udev from updating kdump crash kernel on hot un/plug changes. Add the following as the first lines to the RHEL udev rule file /usr/lib/udev/rules.d/98-kexec.rules: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" With this changeset applied, the two rules evaluate to false for CPU and memory change events and thus skip the userspace unload-then-reload of kdump. - Change to the kexec_file_load for loading the kdump kernel: Eg. on RHEL: in /usr/bin/kdumpctl, change to: standard_kexec_args="-p -d -s" which adds the -s to select kexec_file_load() syscall. This kernel patchset also supports kexec_load() with a modified kexec userspace utility. A working changeset to the kexec userspace utility is posted to the kexec-tools mailing list here: http://lists.infradead.org/pipermail/kexec/2023-May/027049.html To use the kexec-tools patch, apply, build and install kexec-tools, then change the kdumpctl's standard_kexec_args to replace the -s with --hotplug. The removal of -s reverts to the kexec_load syscall and the addition of --hotplug invokes the changes put forth in the kexec-tools patch. This patch (of 8): The crash hotplug support leans on the work for the kexec_file_load() syscall. To also support the kexec_load() syscall, a few bits of code need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are moved out of kexec_file.c and into a common location crash_core.c. In addition, struct crash_mem and crash_notes were moved to new locales so that PROC_KCORE, which sets CRASH_CORE alone, builds correctly. No functionality change intended. Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:39 +00:00
/* Per cpu memory for storing cpu states in case of system crash. */
note_buf_t __percpu *crash_notes;
vmcoreinfo: include kallsyms symbols The internal kallsyms tables contain information which could be quite useful to a debugging tool in the absence of other debuginfo. If kallsyms is enabled, then a debugging tool could parse it and use it as a fallback symbol table. Combined with BTF data, live & post-mortem debuggers can support basic operations without needing a large DWARF debuginfo file available. As many as five symbols are necessary to properly parse kallsyms names and addresses. Add these to the vmcoreinfo note. CONFIG_KALLSYMS_ABSOLUTE_PERCPU does impact the computation of symbol addresses. However, a debugger can infer this configuration value by comparing the address of _stext in the vmcoreinfo with the address computed via kallsyms. So there's no need to include information about this config value in the vmcoreinfo note. To verify that we're still well below the maximum of 4096 bytes, I created a script[1] to compute a rough upper bound on the possible size of vmcoreinfo. On v5.18-rc7, the script reports 3106 bytes, and with this patch, the maximum become 3370 bytes. [1]: https://github.com/brenns10/kernel_stuff/blob/master/vmcoreinfosize/ Link: https://lkml.kernel.org/r/20220517000508.777145-3-stephen.s.brennan@oracle.com Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Bixuan Cui <cuibixuan@huawei.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Vernet <void@manifault.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-17 00:05:08 +00:00
2024-01-24 05:12:44 +00:00
#ifdef CONFIG_CRASH_DUMP
int kimage_crash_copy_vmcoreinfo(struct kimage *image)
{
struct page *vmcoreinfo_page;
void *safecopy;
if (!IS_ENABLED(CONFIG_CRASH_DUMP))
return 0;
if (image->type != KEXEC_TYPE_CRASH)
return 0;
/*
* For kdump, allocate one vmcoreinfo safe copy from the
* crash memory. as we have arch_kexec_protect_crashkres()
* after kexec syscall, we naturally protect it from write
* (even read) access under kernel direct mapping. But on
* the other hand, we still need to operate it when crash
* happens to generate vmcoreinfo note, hereby we rely on
* vmap for this purpose.
*/
vmcoreinfo_page = kimage_alloc_control_pages(image, 0);
if (!vmcoreinfo_page) {
pr_warn("Could not allocate vmcoreinfo buffer\n");
return -ENOMEM;
}
safecopy = vmap(&vmcoreinfo_page, 1, VM_MAP, PAGE_KERNEL);
if (!safecopy) {
pr_warn("Could not vmap vmcoreinfo buffer\n");
return -ENOMEM;
}
image->vmcoreinfo_data_copy = safecopy;
crash_update_vmcoreinfo_safecopy(safecopy);
return 0;
}
int kexec_should_crash(struct task_struct *p)
{
/*
* If crash_kexec_post_notifiers is enabled, don't run
* crash_kexec() here yet, which must be run after panic
* notifiers in panic().
*/
if (crash_kexec_post_notifiers)
return 0;
/*
* There are 4 panic() calls in make_task_dead() path, each of which
* corresponds to each of these 4 conditions.
*/
if (in_interrupt() || !p->pid || is_global_init(p) || panic_on_oops)
return 1;
return 0;
}
int kexec_crash_loaded(void)
{
return !!kexec_crash_image;
}
EXPORT_SYMBOL_GPL(kexec_crash_loaded);
/*
* No panic_cpu check version of crash_kexec(). This function is called
* only when panic_cpu holds the current CPU number; this is the only CPU
* which processes crash_kexec routines.
*/
void __noclone __crash_kexec(struct pt_regs *regs)
{
/* Take the kexec_lock here to prevent sys_kexec_load
* running on one cpu from replacing the crash kernel
* we are using after a panic on a different cpu.
*
* If the crash kernel was not located in a fixed area
* of memory the xchg(&kexec_crash_image) would be
* sufficient. But since I reuse the memory...
*/
if (kexec_trylock()) {
if (kexec_crash_image) {
struct pt_regs fixed_regs;
crash_setup_regs(&fixed_regs, regs);
crash_save_vmcoreinfo();
machine_crash_shutdown(&fixed_regs);
machine_kexec(kexec_crash_image);
}
kexec_unlock();
}
}
STACK_FRAME_NON_STANDARD(__crash_kexec);
__bpf_kfunc void crash_kexec(struct pt_regs *regs)
{
int old_cpu, this_cpu;
/*
* Only one CPU is allowed to execute the crash_kexec() code as with
* panic(). Otherwise parallel calls of panic() and crash_kexec()
* may stop each other. To exclude them, we use panic_cpu here too.
*/
old_cpu = PANIC_CPU_INVALID;
this_cpu = raw_smp_processor_id();
if (atomic_try_cmpxchg(&panic_cpu, &old_cpu, this_cpu)) {
/* This is the 1st CPU which comes here, so go ahead. */
__crash_kexec(regs);
/*
* Reset panic_cpu to allow another panic()/crash_kexec()
* call.
*/
atomic_set(&panic_cpu, PANIC_CPU_INVALID);
}
}
static inline resource_size_t crash_resource_size(const struct resource *res)
{
return !res->end ? 0 : resource_size(res);
}
crash: move a few code bits to setup support of crash hotplug Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28. Once the kdump service is loaded, if changes to CPUs or memory occur, either by hot un/plug or off/onlining, the crash elfcorehdr must also be updated. The elfcorehdr describes to kdump the CPUs and memory in the system, and any inaccuracies can result in a vmcore with missing CPU context or memory regions. The current solution utilizes udev to initiate an unload-then-reload of the kdump image (eg. kernel, initrd, boot_params, purgatory and elfcorehdr) by the userspace kexec utility. In the original post I outlined the significant performance problems related to offloading this activity to userspace. This patchset introduces a generic crash handler that registers with the CPU and memory notifiers. Upon CPU or memory changes, from either hot un/plug or off/onlining, this generic handler is invoked and performs important housekeeping, for example obtaining the appropriate lock, and then invokes an architecture specific handler to do the appropriate elfcorehdr update. Note the description in patch 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that enables further optimizations related to CPU plug/unplug/online/offline performance of elfcorehdr updates. In the case of x86_64, the arch specific handler generates a new elfcorehdr, and overwrites the old one in memory; thus no involvement with userspace needed. To realize the benefits/test this patchset, one must make a couple of minor changes to userspace: - Prevent udev from updating kdump crash kernel on hot un/plug changes. Add the following as the first lines to the RHEL udev rule file /usr/lib/udev/rules.d/98-kexec.rules: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" With this changeset applied, the two rules evaluate to false for CPU and memory change events and thus skip the userspace unload-then-reload of kdump. - Change to the kexec_file_load for loading the kdump kernel: Eg. on RHEL: in /usr/bin/kdumpctl, change to: standard_kexec_args="-p -d -s" which adds the -s to select kexec_file_load() syscall. This kernel patchset also supports kexec_load() with a modified kexec userspace utility. A working changeset to the kexec userspace utility is posted to the kexec-tools mailing list here: http://lists.infradead.org/pipermail/kexec/2023-May/027049.html To use the kexec-tools patch, apply, build and install kexec-tools, then change the kdumpctl's standard_kexec_args to replace the -s with --hotplug. The removal of -s reverts to the kexec_load syscall and the addition of --hotplug invokes the changes put forth in the kexec-tools patch. This patch (of 8): The crash hotplug support leans on the work for the kexec_file_load() syscall. To also support the kexec_load() syscall, a few bits of code need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are moved out of kexec_file.c and into a common location crash_core.c. In addition, struct crash_mem and crash_notes were moved to new locales so that PROC_KCORE, which sets CRASH_CORE alone, builds correctly. No functionality change intended. Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:39 +00:00
int crash_prepare_elf64_headers(struct crash_mem *mem, int need_kernel_map,
void **addr, unsigned long *sz)
{
Elf64_Ehdr *ehdr;
Elf64_Phdr *phdr;
unsigned long nr_cpus = num_possible_cpus(), nr_phdr, elf_sz;
unsigned char *buf;
unsigned int cpu, i;
unsigned long long notes_addr;
unsigned long mstart, mend;
/* extra phdr for vmcoreinfo ELF note */
nr_phdr = nr_cpus + 1;
nr_phdr += mem->nr_ranges;
/*
* kexec-tools creates an extra PT_LOAD phdr for kernel text mapping
* area (for example, ffffffff80000000 - ffffffffa0000000 on x86_64).
* I think this is required by tools like gdb. So same physical
* memory will be mapped in two ELF headers. One will contain kernel
* text virtual addresses and other will have __va(physical) addresses.
*/
nr_phdr++;
elf_sz = sizeof(Elf64_Ehdr) + nr_phdr * sizeof(Elf64_Phdr);
elf_sz = ALIGN(elf_sz, ELF_CORE_HEADER_ALIGN);
buf = vzalloc(elf_sz);
if (!buf)
return -ENOMEM;
ehdr = (Elf64_Ehdr *)buf;
phdr = (Elf64_Phdr *)(ehdr + 1);
memcpy(ehdr->e_ident, ELFMAG, SELFMAG);
ehdr->e_ident[EI_CLASS] = ELFCLASS64;
ehdr->e_ident[EI_DATA] = ELFDATA2LSB;
ehdr->e_ident[EI_VERSION] = EV_CURRENT;
ehdr->e_ident[EI_OSABI] = ELF_OSABI;
memset(ehdr->e_ident + EI_PAD, 0, EI_NIDENT - EI_PAD);
ehdr->e_type = ET_CORE;
ehdr->e_machine = ELF_ARCH;
ehdr->e_version = EV_CURRENT;
ehdr->e_phoff = sizeof(Elf64_Ehdr);
ehdr->e_ehsize = sizeof(Elf64_Ehdr);
ehdr->e_phentsize = sizeof(Elf64_Phdr);
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu() The function crash_prepare_elf64_headers() generates the elfcorehdr which describes the CPUs and memory in the system for the crash kernel. In particular, it writes out ELF PT_NOTEs for memory regions and the CPUs in the system. With respect to the CPUs, the current implementation utilizes for_each_present_cpu() which means that as CPUs are added and removed, the elfcorehdr must again be updated to reflect the new set of CPUs. The reasoning behind the move to use for_each_possible_cpu(), is: - At kernel boot time, all percpu crash_notes are allocated for all possible CPUs; that is, crash_notes are not allocated dynamically when CPUs are plugged/unplugged. Thus the crash_notes for each possible CPU are always available. - The crash_prepare_elf64_headers() creates an ELF PT_NOTE per CPU. Changing to for_each_possible_cpu() is valid as the crash_notes pointed to by each CPU PT_NOTE are present and always valid. Furthermore, examining a common crash processing path of: kernel panic -> crash kernel -> makedumpfile -> 'crash' analyzer elfcorehdr /proc/vmcore vmcore reveals how the ELF CPU PT_NOTEs are utilized: - Upon panic, each CPU is sent an IPI and shuts itself down, recording its state in its crash_notes. When all CPUs are shutdown, the crash kernel is launched with a pointer to the elfcorehdr. - The crash kernel via linux/fs/proc/vmcore.c does not examine or use the contents of the PT_NOTEs, it exposes them via /proc/vmcore. - The makedumpfile utility uses /proc/vmcore and reads the CPU PT_NOTEs to craft a nr_cpus variable, which is reported in a header but otherwise generally unused. Makedumpfile creates the vmcore. - The 'crash' dump analyzer does not appear to reference the CPU PT_NOTEs. Instead it looks-up the cpu_[possible|present|onlin]_mask symbols and directly examines those structure contents from vmcore memory. From that information it is able to determine which CPUs are present and online, and locate the corresponding crash_notes. Said differently, it appears that 'crash' analyzer does not rely on the ELF PT_NOTEs for CPUs; rather it obtains the information directly via kernel symbols and the memory within the vmcore. (There maybe other vmcore generating and analysis tools that do use these PT_NOTEs, but 'makedumpfile' and 'crash' seems to be the most common solution.) This results in the benefit of having all CPUs described in the elfcorehdr, and therefore reducing the need to re-generate the elfcorehdr on CPU changes, at the small expense of an additional 56 bytes per PT_NOTE for not-present-but-possible CPUs. On systems where kexec_file_load() syscall is utilized, all the above is valid. On systems where kexec_load() syscall is utilized, there may be the need for the elfcorehdr to be regenerated once. The reason being that some archs only populate the 'present' CPUs from the /sys/devices/system/cpus entries, which the userspace 'kexec' utility uses to generate the userspace-supplied elfcorehdr. In this situation, one memory or CPU change will rewrite the elfcorehdr via the crash_prepare_elf64_headers() function and now all possible CPUs will be described, just as with kexec_file_load() syscall. Link: https://lkml.kernel.org/r/20230814214446.6659-8-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Suggested-by: Sourabh Jain <sourabhjain@linux.ibm.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:45 +00:00
/* Prepare one phdr of type PT_NOTE for each possible CPU */
for_each_possible_cpu(cpu) {
crash: move a few code bits to setup support of crash hotplug Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28. Once the kdump service is loaded, if changes to CPUs or memory occur, either by hot un/plug or off/onlining, the crash elfcorehdr must also be updated. The elfcorehdr describes to kdump the CPUs and memory in the system, and any inaccuracies can result in a vmcore with missing CPU context or memory regions. The current solution utilizes udev to initiate an unload-then-reload of the kdump image (eg. kernel, initrd, boot_params, purgatory and elfcorehdr) by the userspace kexec utility. In the original post I outlined the significant performance problems related to offloading this activity to userspace. This patchset introduces a generic crash handler that registers with the CPU and memory notifiers. Upon CPU or memory changes, from either hot un/plug or off/onlining, this generic handler is invoked and performs important housekeeping, for example obtaining the appropriate lock, and then invokes an architecture specific handler to do the appropriate elfcorehdr update. Note the description in patch 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that enables further optimizations related to CPU plug/unplug/online/offline performance of elfcorehdr updates. In the case of x86_64, the arch specific handler generates a new elfcorehdr, and overwrites the old one in memory; thus no involvement with userspace needed. To realize the benefits/test this patchset, one must make a couple of minor changes to userspace: - Prevent udev from updating kdump crash kernel on hot un/plug changes. Add the following as the first lines to the RHEL udev rule file /usr/lib/udev/rules.d/98-kexec.rules: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" With this changeset applied, the two rules evaluate to false for CPU and memory change events and thus skip the userspace unload-then-reload of kdump. - Change to the kexec_file_load for loading the kdump kernel: Eg. on RHEL: in /usr/bin/kdumpctl, change to: standard_kexec_args="-p -d -s" which adds the -s to select kexec_file_load() syscall. This kernel patchset also supports kexec_load() with a modified kexec userspace utility. A working changeset to the kexec userspace utility is posted to the kexec-tools mailing list here: http://lists.infradead.org/pipermail/kexec/2023-May/027049.html To use the kexec-tools patch, apply, build and install kexec-tools, then change the kdumpctl's standard_kexec_args to replace the -s with --hotplug. The removal of -s reverts to the kexec_load syscall and the addition of --hotplug invokes the changes put forth in the kexec-tools patch. This patch (of 8): The crash hotplug support leans on the work for the kexec_file_load() syscall. To also support the kexec_load() syscall, a few bits of code need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are moved out of kexec_file.c and into a common location crash_core.c. In addition, struct crash_mem and crash_notes were moved to new locales so that PROC_KCORE, which sets CRASH_CORE alone, builds correctly. No functionality change intended. Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:39 +00:00
phdr->p_type = PT_NOTE;
notes_addr = per_cpu_ptr_to_phys(per_cpu_ptr(crash_notes, cpu));
phdr->p_offset = phdr->p_paddr = notes_addr;
phdr->p_filesz = phdr->p_memsz = sizeof(note_buf_t);
(ehdr->e_phnum)++;
phdr++;
}
/* Prepare one PT_NOTE header for vmcoreinfo */
phdr->p_type = PT_NOTE;
phdr->p_offset = phdr->p_paddr = paddr_vmcoreinfo_note();
phdr->p_filesz = phdr->p_memsz = VMCOREINFO_NOTE_SIZE;
(ehdr->e_phnum)++;
phdr++;
/* Prepare PT_LOAD type program header for kernel text region */
if (need_kernel_map) {
phdr->p_type = PT_LOAD;
phdr->p_flags = PF_R|PF_W|PF_X;
phdr->p_vaddr = (unsigned long) _text;
phdr->p_filesz = phdr->p_memsz = _end - _text;
phdr->p_offset = phdr->p_paddr = __pa_symbol(_text);
ehdr->e_phnum++;
phdr++;
}
/* Go through all the ranges in mem->ranges[] and prepare phdr */
for (i = 0; i < mem->nr_ranges; i++) {
mstart = mem->ranges[i].start;
mend = mem->ranges[i].end;
phdr->p_type = PT_LOAD;
phdr->p_flags = PF_R|PF_W|PF_X;
phdr->p_offset = mstart;
phdr->p_paddr = mstart;
phdr->p_vaddr = (unsigned long) __va(mstart);
phdr->p_filesz = phdr->p_memsz = mend - mstart + 1;
phdr->p_align = 0;
ehdr->e_phnum++;
#ifdef CONFIG_KEXEC_FILE
kexec_dprintk("Crash PT_LOAD ELF header. phdr=%p vaddr=0x%llx, paddr=0x%llx, sz=0x%llx e_phnum=%d p_offset=0x%llx\n",
phdr, phdr->p_vaddr, phdr->p_paddr, phdr->p_filesz,
ehdr->e_phnum, phdr->p_offset);
#endif
crash: move a few code bits to setup support of crash hotplug Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28. Once the kdump service is loaded, if changes to CPUs or memory occur, either by hot un/plug or off/onlining, the crash elfcorehdr must also be updated. The elfcorehdr describes to kdump the CPUs and memory in the system, and any inaccuracies can result in a vmcore with missing CPU context or memory regions. The current solution utilizes udev to initiate an unload-then-reload of the kdump image (eg. kernel, initrd, boot_params, purgatory and elfcorehdr) by the userspace kexec utility. In the original post I outlined the significant performance problems related to offloading this activity to userspace. This patchset introduces a generic crash handler that registers with the CPU and memory notifiers. Upon CPU or memory changes, from either hot un/plug or off/onlining, this generic handler is invoked and performs important housekeeping, for example obtaining the appropriate lock, and then invokes an architecture specific handler to do the appropriate elfcorehdr update. Note the description in patch 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that enables further optimizations related to CPU plug/unplug/online/offline performance of elfcorehdr updates. In the case of x86_64, the arch specific handler generates a new elfcorehdr, and overwrites the old one in memory; thus no involvement with userspace needed. To realize the benefits/test this patchset, one must make a couple of minor changes to userspace: - Prevent udev from updating kdump crash kernel on hot un/plug changes. Add the following as the first lines to the RHEL udev rule file /usr/lib/udev/rules.d/98-kexec.rules: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" With this changeset applied, the two rules evaluate to false for CPU and memory change events and thus skip the userspace unload-then-reload of kdump. - Change to the kexec_file_load for loading the kdump kernel: Eg. on RHEL: in /usr/bin/kdumpctl, change to: standard_kexec_args="-p -d -s" which adds the -s to select kexec_file_load() syscall. This kernel patchset also supports kexec_load() with a modified kexec userspace utility. A working changeset to the kexec userspace utility is posted to the kexec-tools mailing list here: http://lists.infradead.org/pipermail/kexec/2023-May/027049.html To use the kexec-tools patch, apply, build and install kexec-tools, then change the kdumpctl's standard_kexec_args to replace the -s with --hotplug. The removal of -s reverts to the kexec_load syscall and the addition of --hotplug invokes the changes put forth in the kexec-tools patch. This patch (of 8): The crash hotplug support leans on the work for the kexec_file_load() syscall. To also support the kexec_load() syscall, a few bits of code need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are moved out of kexec_file.c and into a common location crash_core.c. In addition, struct crash_mem and crash_notes were moved to new locales so that PROC_KCORE, which sets CRASH_CORE alone, builds correctly. No functionality change intended. Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:39 +00:00
phdr++;
}
*addr = buf;
*sz = elf_sz;
return 0;
}
int crash_exclude_mem_range(struct crash_mem *mem,
unsigned long long mstart, unsigned long long mend)
{
int i;
crash: move a few code bits to setup support of crash hotplug Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28. Once the kdump service is loaded, if changes to CPUs or memory occur, either by hot un/plug or off/onlining, the crash elfcorehdr must also be updated. The elfcorehdr describes to kdump the CPUs and memory in the system, and any inaccuracies can result in a vmcore with missing CPU context or memory regions. The current solution utilizes udev to initiate an unload-then-reload of the kdump image (eg. kernel, initrd, boot_params, purgatory and elfcorehdr) by the userspace kexec utility. In the original post I outlined the significant performance problems related to offloading this activity to userspace. This patchset introduces a generic crash handler that registers with the CPU and memory notifiers. Upon CPU or memory changes, from either hot un/plug or off/onlining, this generic handler is invoked and performs important housekeeping, for example obtaining the appropriate lock, and then invokes an architecture specific handler to do the appropriate elfcorehdr update. Note the description in patch 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that enables further optimizations related to CPU plug/unplug/online/offline performance of elfcorehdr updates. In the case of x86_64, the arch specific handler generates a new elfcorehdr, and overwrites the old one in memory; thus no involvement with userspace needed. To realize the benefits/test this patchset, one must make a couple of minor changes to userspace: - Prevent udev from updating kdump crash kernel on hot un/plug changes. Add the following as the first lines to the RHEL udev rule file /usr/lib/udev/rules.d/98-kexec.rules: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" With this changeset applied, the two rules evaluate to false for CPU and memory change events and thus skip the userspace unload-then-reload of kdump. - Change to the kexec_file_load for loading the kdump kernel: Eg. on RHEL: in /usr/bin/kdumpctl, change to: standard_kexec_args="-p -d -s" which adds the -s to select kexec_file_load() syscall. This kernel patchset also supports kexec_load() with a modified kexec userspace utility. A working changeset to the kexec userspace utility is posted to the kexec-tools mailing list here: http://lists.infradead.org/pipermail/kexec/2023-May/027049.html To use the kexec-tools patch, apply, build and install kexec-tools, then change the kdumpctl's standard_kexec_args to replace the -s with --hotplug. The removal of -s reverts to the kexec_load syscall and the addition of --hotplug invokes the changes put forth in the kexec-tools patch. This patch (of 8): The crash hotplug support leans on the work for the kexec_file_load() syscall. To also support the kexec_load() syscall, a few bits of code need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are moved out of kexec_file.c and into a common location crash_core.c. In addition, struct crash_mem and crash_notes were moved to new locales so that PROC_KCORE, which sets CRASH_CORE alone, builds correctly. No functionality change intended. Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:39 +00:00
unsigned long long start, end, p_start, p_end;
for (i = 0; i < mem->nr_ranges; i++) {
start = mem->ranges[i].start;
end = mem->ranges[i].end;
p_start = mstart;
p_end = mend;
if (p_start > end)
crash: move a few code bits to setup support of crash hotplug Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28. Once the kdump service is loaded, if changes to CPUs or memory occur, either by hot un/plug or off/onlining, the crash elfcorehdr must also be updated. The elfcorehdr describes to kdump the CPUs and memory in the system, and any inaccuracies can result in a vmcore with missing CPU context or memory regions. The current solution utilizes udev to initiate an unload-then-reload of the kdump image (eg. kernel, initrd, boot_params, purgatory and elfcorehdr) by the userspace kexec utility. In the original post I outlined the significant performance problems related to offloading this activity to userspace. This patchset introduces a generic crash handler that registers with the CPU and memory notifiers. Upon CPU or memory changes, from either hot un/plug or off/onlining, this generic handler is invoked and performs important housekeeping, for example obtaining the appropriate lock, and then invokes an architecture specific handler to do the appropriate elfcorehdr update. Note the description in patch 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that enables further optimizations related to CPU plug/unplug/online/offline performance of elfcorehdr updates. In the case of x86_64, the arch specific handler generates a new elfcorehdr, and overwrites the old one in memory; thus no involvement with userspace needed. To realize the benefits/test this patchset, one must make a couple of minor changes to userspace: - Prevent udev from updating kdump crash kernel on hot un/plug changes. Add the following as the first lines to the RHEL udev rule file /usr/lib/udev/rules.d/98-kexec.rules: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" With this changeset applied, the two rules evaluate to false for CPU and memory change events and thus skip the userspace unload-then-reload of kdump. - Change to the kexec_file_load for loading the kdump kernel: Eg. on RHEL: in /usr/bin/kdumpctl, change to: standard_kexec_args="-p -d -s" which adds the -s to select kexec_file_load() syscall. This kernel patchset also supports kexec_load() with a modified kexec userspace utility. A working changeset to the kexec userspace utility is posted to the kexec-tools mailing list here: http://lists.infradead.org/pipermail/kexec/2023-May/027049.html To use the kexec-tools patch, apply, build and install kexec-tools, then change the kdumpctl's standard_kexec_args to replace the -s with --hotplug. The removal of -s reverts to the kexec_load syscall and the addition of --hotplug invokes the changes put forth in the kexec-tools patch. This patch (of 8): The crash hotplug support leans on the work for the kexec_file_load() syscall. To also support the kexec_load() syscall, a few bits of code need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are moved out of kexec_file.c and into a common location crash_core.c. In addition, struct crash_mem and crash_notes were moved to new locales so that PROC_KCORE, which sets CRASH_CORE alone, builds correctly. No functionality change intended. Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:39 +00:00
continue;
/*
* Because the memory ranges in mem->ranges are stored in
* ascending order, when we detect `p_end < start`, we can
* immediately exit the for loop, as the subsequent memory
* ranges will definitely be outside the range we are looking
* for.
*/
if (p_end < start)
break;
crash: move a few code bits to setup support of crash hotplug Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28. Once the kdump service is loaded, if changes to CPUs or memory occur, either by hot un/plug or off/onlining, the crash elfcorehdr must also be updated. The elfcorehdr describes to kdump the CPUs and memory in the system, and any inaccuracies can result in a vmcore with missing CPU context or memory regions. The current solution utilizes udev to initiate an unload-then-reload of the kdump image (eg. kernel, initrd, boot_params, purgatory and elfcorehdr) by the userspace kexec utility. In the original post I outlined the significant performance problems related to offloading this activity to userspace. This patchset introduces a generic crash handler that registers with the CPU and memory notifiers. Upon CPU or memory changes, from either hot un/plug or off/onlining, this generic handler is invoked and performs important housekeeping, for example obtaining the appropriate lock, and then invokes an architecture specific handler to do the appropriate elfcorehdr update. Note the description in patch 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that enables further optimizations related to CPU plug/unplug/online/offline performance of elfcorehdr updates. In the case of x86_64, the arch specific handler generates a new elfcorehdr, and overwrites the old one in memory; thus no involvement with userspace needed. To realize the benefits/test this patchset, one must make a couple of minor changes to userspace: - Prevent udev from updating kdump crash kernel on hot un/plug changes. Add the following as the first lines to the RHEL udev rule file /usr/lib/udev/rules.d/98-kexec.rules: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" With this changeset applied, the two rules evaluate to false for CPU and memory change events and thus skip the userspace unload-then-reload of kdump. - Change to the kexec_file_load for loading the kdump kernel: Eg. on RHEL: in /usr/bin/kdumpctl, change to: standard_kexec_args="-p -d -s" which adds the -s to select kexec_file_load() syscall. This kernel patchset also supports kexec_load() with a modified kexec userspace utility. A working changeset to the kexec userspace utility is posted to the kexec-tools mailing list here: http://lists.infradead.org/pipermail/kexec/2023-May/027049.html To use the kexec-tools patch, apply, build and install kexec-tools, then change the kdumpctl's standard_kexec_args to replace the -s with --hotplug. The removal of -s reverts to the kexec_load syscall and the addition of --hotplug invokes the changes put forth in the kexec-tools patch. This patch (of 8): The crash hotplug support leans on the work for the kexec_file_load() syscall. To also support the kexec_load() syscall, a few bits of code need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are moved out of kexec_file.c and into a common location crash_core.c. In addition, struct crash_mem and crash_notes were moved to new locales so that PROC_KCORE, which sets CRASH_CORE alone, builds correctly. No functionality change intended. Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:39 +00:00
/* Truncate any area outside of range */
if (p_start < start)
crash: move a few code bits to setup support of crash hotplug Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28. Once the kdump service is loaded, if changes to CPUs or memory occur, either by hot un/plug or off/onlining, the crash elfcorehdr must also be updated. The elfcorehdr describes to kdump the CPUs and memory in the system, and any inaccuracies can result in a vmcore with missing CPU context or memory regions. The current solution utilizes udev to initiate an unload-then-reload of the kdump image (eg. kernel, initrd, boot_params, purgatory and elfcorehdr) by the userspace kexec utility. In the original post I outlined the significant performance problems related to offloading this activity to userspace. This patchset introduces a generic crash handler that registers with the CPU and memory notifiers. Upon CPU or memory changes, from either hot un/plug or off/onlining, this generic handler is invoked and performs important housekeeping, for example obtaining the appropriate lock, and then invokes an architecture specific handler to do the appropriate elfcorehdr update. Note the description in patch 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that enables further optimizations related to CPU plug/unplug/online/offline performance of elfcorehdr updates. In the case of x86_64, the arch specific handler generates a new elfcorehdr, and overwrites the old one in memory; thus no involvement with userspace needed. To realize the benefits/test this patchset, one must make a couple of minor changes to userspace: - Prevent udev from updating kdump crash kernel on hot un/plug changes. Add the following as the first lines to the RHEL udev rule file /usr/lib/udev/rules.d/98-kexec.rules: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" With this changeset applied, the two rules evaluate to false for CPU and memory change events and thus skip the userspace unload-then-reload of kdump. - Change to the kexec_file_load for loading the kdump kernel: Eg. on RHEL: in /usr/bin/kdumpctl, change to: standard_kexec_args="-p -d -s" which adds the -s to select kexec_file_load() syscall. This kernel patchset also supports kexec_load() with a modified kexec userspace utility. A working changeset to the kexec userspace utility is posted to the kexec-tools mailing list here: http://lists.infradead.org/pipermail/kexec/2023-May/027049.html To use the kexec-tools patch, apply, build and install kexec-tools, then change the kdumpctl's standard_kexec_args to replace the -s with --hotplug. The removal of -s reverts to the kexec_load syscall and the addition of --hotplug invokes the changes put forth in the kexec-tools patch. This patch (of 8): The crash hotplug support leans on the work for the kexec_file_load() syscall. To also support the kexec_load() syscall, a few bits of code need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are moved out of kexec_file.c and into a common location crash_core.c. In addition, struct crash_mem and crash_notes were moved to new locales so that PROC_KCORE, which sets CRASH_CORE alone, builds correctly. No functionality change intended. Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:39 +00:00
p_start = start;
if (p_end > end)
crash: move a few code bits to setup support of crash hotplug Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28. Once the kdump service is loaded, if changes to CPUs or memory occur, either by hot un/plug or off/onlining, the crash elfcorehdr must also be updated. The elfcorehdr describes to kdump the CPUs and memory in the system, and any inaccuracies can result in a vmcore with missing CPU context or memory regions. The current solution utilizes udev to initiate an unload-then-reload of the kdump image (eg. kernel, initrd, boot_params, purgatory and elfcorehdr) by the userspace kexec utility. In the original post I outlined the significant performance problems related to offloading this activity to userspace. This patchset introduces a generic crash handler that registers with the CPU and memory notifiers. Upon CPU or memory changes, from either hot un/plug or off/onlining, this generic handler is invoked and performs important housekeeping, for example obtaining the appropriate lock, and then invokes an architecture specific handler to do the appropriate elfcorehdr update. Note the description in patch 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that enables further optimizations related to CPU plug/unplug/online/offline performance of elfcorehdr updates. In the case of x86_64, the arch specific handler generates a new elfcorehdr, and overwrites the old one in memory; thus no involvement with userspace needed. To realize the benefits/test this patchset, one must make a couple of minor changes to userspace: - Prevent udev from updating kdump crash kernel on hot un/plug changes. Add the following as the first lines to the RHEL udev rule file /usr/lib/udev/rules.d/98-kexec.rules: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" With this changeset applied, the two rules evaluate to false for CPU and memory change events and thus skip the userspace unload-then-reload of kdump. - Change to the kexec_file_load for loading the kdump kernel: Eg. on RHEL: in /usr/bin/kdumpctl, change to: standard_kexec_args="-p -d -s" which adds the -s to select kexec_file_load() syscall. This kernel patchset also supports kexec_load() with a modified kexec userspace utility. A working changeset to the kexec userspace utility is posted to the kexec-tools mailing list here: http://lists.infradead.org/pipermail/kexec/2023-May/027049.html To use the kexec-tools patch, apply, build and install kexec-tools, then change the kdumpctl's standard_kexec_args to replace the -s with --hotplug. The removal of -s reverts to the kexec_load syscall and the addition of --hotplug invokes the changes put forth in the kexec-tools patch. This patch (of 8): The crash hotplug support leans on the work for the kexec_file_load() syscall. To also support the kexec_load() syscall, a few bits of code need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are moved out of kexec_file.c and into a common location crash_core.c. In addition, struct crash_mem and crash_notes were moved to new locales so that PROC_KCORE, which sets CRASH_CORE alone, builds correctly. No functionality change intended. Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:39 +00:00
p_end = end;
/* Found completely overlapping range */
if (p_start == start && p_end == end) {
memmove(&mem->ranges[i], &mem->ranges[i + 1],
(mem->nr_ranges - (i + 1)) * sizeof(mem->ranges[i]));
i--;
crash: move a few code bits to setup support of crash hotplug Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28. Once the kdump service is loaded, if changes to CPUs or memory occur, either by hot un/plug or off/onlining, the crash elfcorehdr must also be updated. The elfcorehdr describes to kdump the CPUs and memory in the system, and any inaccuracies can result in a vmcore with missing CPU context or memory regions. The current solution utilizes udev to initiate an unload-then-reload of the kdump image (eg. kernel, initrd, boot_params, purgatory and elfcorehdr) by the userspace kexec utility. In the original post I outlined the significant performance problems related to offloading this activity to userspace. This patchset introduces a generic crash handler that registers with the CPU and memory notifiers. Upon CPU or memory changes, from either hot un/plug or off/onlining, this generic handler is invoked and performs important housekeeping, for example obtaining the appropriate lock, and then invokes an architecture specific handler to do the appropriate elfcorehdr update. Note the description in patch 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that enables further optimizations related to CPU plug/unplug/online/offline performance of elfcorehdr updates. In the case of x86_64, the arch specific handler generates a new elfcorehdr, and overwrites the old one in memory; thus no involvement with userspace needed. To realize the benefits/test this patchset, one must make a couple of minor changes to userspace: - Prevent udev from updating kdump crash kernel on hot un/plug changes. Add the following as the first lines to the RHEL udev rule file /usr/lib/udev/rules.d/98-kexec.rules: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" With this changeset applied, the two rules evaluate to false for CPU and memory change events and thus skip the userspace unload-then-reload of kdump. - Change to the kexec_file_load for loading the kdump kernel: Eg. on RHEL: in /usr/bin/kdumpctl, change to: standard_kexec_args="-p -d -s" which adds the -s to select kexec_file_load() syscall. This kernel patchset also supports kexec_load() with a modified kexec userspace utility. A working changeset to the kexec userspace utility is posted to the kexec-tools mailing list here: http://lists.infradead.org/pipermail/kexec/2023-May/027049.html To use the kexec-tools patch, apply, build and install kexec-tools, then change the kdumpctl's standard_kexec_args to replace the -s with --hotplug. The removal of -s reverts to the kexec_load syscall and the addition of --hotplug invokes the changes put forth in the kexec-tools patch. This patch (of 8): The crash hotplug support leans on the work for the kexec_file_load() syscall. To also support the kexec_load() syscall, a few bits of code need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are moved out of kexec_file.c and into a common location crash_core.c. In addition, struct crash_mem and crash_notes were moved to new locales so that PROC_KCORE, which sets CRASH_CORE alone, builds correctly. No functionality change intended. Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:39 +00:00
mem->nr_ranges--;
} else if (p_start > start && p_end < end) {
crash: move a few code bits to setup support of crash hotplug Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28. Once the kdump service is loaded, if changes to CPUs or memory occur, either by hot un/plug or off/onlining, the crash elfcorehdr must also be updated. The elfcorehdr describes to kdump the CPUs and memory in the system, and any inaccuracies can result in a vmcore with missing CPU context or memory regions. The current solution utilizes udev to initiate an unload-then-reload of the kdump image (eg. kernel, initrd, boot_params, purgatory and elfcorehdr) by the userspace kexec utility. In the original post I outlined the significant performance problems related to offloading this activity to userspace. This patchset introduces a generic crash handler that registers with the CPU and memory notifiers. Upon CPU or memory changes, from either hot un/plug or off/onlining, this generic handler is invoked and performs important housekeeping, for example obtaining the appropriate lock, and then invokes an architecture specific handler to do the appropriate elfcorehdr update. Note the description in patch 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that enables further optimizations related to CPU plug/unplug/online/offline performance of elfcorehdr updates. In the case of x86_64, the arch specific handler generates a new elfcorehdr, and overwrites the old one in memory; thus no involvement with userspace needed. To realize the benefits/test this patchset, one must make a couple of minor changes to userspace: - Prevent udev from updating kdump crash kernel on hot un/plug changes. Add the following as the first lines to the RHEL udev rule file /usr/lib/udev/rules.d/98-kexec.rules: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" With this changeset applied, the two rules evaluate to false for CPU and memory change events and thus skip the userspace unload-then-reload of kdump. - Change to the kexec_file_load for loading the kdump kernel: Eg. on RHEL: in /usr/bin/kdumpctl, change to: standard_kexec_args="-p -d -s" which adds the -s to select kexec_file_load() syscall. This kernel patchset also supports kexec_load() with a modified kexec userspace utility. A working changeset to the kexec userspace utility is posted to the kexec-tools mailing list here: http://lists.infradead.org/pipermail/kexec/2023-May/027049.html To use the kexec-tools patch, apply, build and install kexec-tools, then change the kdumpctl's standard_kexec_args to replace the -s with --hotplug. The removal of -s reverts to the kexec_load syscall and the addition of --hotplug invokes the changes put forth in the kexec-tools patch. This patch (of 8): The crash hotplug support leans on the work for the kexec_file_load() syscall. To also support the kexec_load() syscall, a few bits of code need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are moved out of kexec_file.c and into a common location crash_core.c. In addition, struct crash_mem and crash_notes were moved to new locales so that PROC_KCORE, which sets CRASH_CORE alone, builds correctly. No functionality change intended. Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:39 +00:00
/* Split original range */
if (mem->nr_ranges >= mem->max_nr_ranges)
return -ENOMEM;
memmove(&mem->ranges[i + 2], &mem->ranges[i + 1],
(mem->nr_ranges - (i + 1)) * sizeof(mem->ranges[i]));
crash: move a few code bits to setup support of crash hotplug Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28. Once the kdump service is loaded, if changes to CPUs or memory occur, either by hot un/plug or off/onlining, the crash elfcorehdr must also be updated. The elfcorehdr describes to kdump the CPUs and memory in the system, and any inaccuracies can result in a vmcore with missing CPU context or memory regions. The current solution utilizes udev to initiate an unload-then-reload of the kdump image (eg. kernel, initrd, boot_params, purgatory and elfcorehdr) by the userspace kexec utility. In the original post I outlined the significant performance problems related to offloading this activity to userspace. This patchset introduces a generic crash handler that registers with the CPU and memory notifiers. Upon CPU or memory changes, from either hot un/plug or off/onlining, this generic handler is invoked and performs important housekeeping, for example obtaining the appropriate lock, and then invokes an architecture specific handler to do the appropriate elfcorehdr update. Note the description in patch 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that enables further optimizations related to CPU plug/unplug/online/offline performance of elfcorehdr updates. In the case of x86_64, the arch specific handler generates a new elfcorehdr, and overwrites the old one in memory; thus no involvement with userspace needed. To realize the benefits/test this patchset, one must make a couple of minor changes to userspace: - Prevent udev from updating kdump crash kernel on hot un/plug changes. Add the following as the first lines to the RHEL udev rule file /usr/lib/udev/rules.d/98-kexec.rules: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" With this changeset applied, the two rules evaluate to false for CPU and memory change events and thus skip the userspace unload-then-reload of kdump. - Change to the kexec_file_load for loading the kdump kernel: Eg. on RHEL: in /usr/bin/kdumpctl, change to: standard_kexec_args="-p -d -s" which adds the -s to select kexec_file_load() syscall. This kernel patchset also supports kexec_load() with a modified kexec userspace utility. A working changeset to the kexec userspace utility is posted to the kexec-tools mailing list here: http://lists.infradead.org/pipermail/kexec/2023-May/027049.html To use the kexec-tools patch, apply, build and install kexec-tools, then change the kdumpctl's standard_kexec_args to replace the -s with --hotplug. The removal of -s reverts to the kexec_load syscall and the addition of --hotplug invokes the changes put forth in the kexec-tools patch. This patch (of 8): The crash hotplug support leans on the work for the kexec_file_load() syscall. To also support the kexec_load() syscall, a few bits of code need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are moved out of kexec_file.c and into a common location crash_core.c. In addition, struct crash_mem and crash_notes were moved to new locales so that PROC_KCORE, which sets CRASH_CORE alone, builds correctly. No functionality change intended. Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:39 +00:00
mem->ranges[i].end = p_start - 1;
mem->ranges[i + 1].start = p_end + 1;
mem->ranges[i + 1].end = end;
i++;
mem->nr_ranges++;
crash: move a few code bits to setup support of crash hotplug Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28. Once the kdump service is loaded, if changes to CPUs or memory occur, either by hot un/plug or off/onlining, the crash elfcorehdr must also be updated. The elfcorehdr describes to kdump the CPUs and memory in the system, and any inaccuracies can result in a vmcore with missing CPU context or memory regions. The current solution utilizes udev to initiate an unload-then-reload of the kdump image (eg. kernel, initrd, boot_params, purgatory and elfcorehdr) by the userspace kexec utility. In the original post I outlined the significant performance problems related to offloading this activity to userspace. This patchset introduces a generic crash handler that registers with the CPU and memory notifiers. Upon CPU or memory changes, from either hot un/plug or off/onlining, this generic handler is invoked and performs important housekeeping, for example obtaining the appropriate lock, and then invokes an architecture specific handler to do the appropriate elfcorehdr update. Note the description in patch 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that enables further optimizations related to CPU plug/unplug/online/offline performance of elfcorehdr updates. In the case of x86_64, the arch specific handler generates a new elfcorehdr, and overwrites the old one in memory; thus no involvement with userspace needed. To realize the benefits/test this patchset, one must make a couple of minor changes to userspace: - Prevent udev from updating kdump crash kernel on hot un/plug changes. Add the following as the first lines to the RHEL udev rule file /usr/lib/udev/rules.d/98-kexec.rules: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" With this changeset applied, the two rules evaluate to false for CPU and memory change events and thus skip the userspace unload-then-reload of kdump. - Change to the kexec_file_load for loading the kdump kernel: Eg. on RHEL: in /usr/bin/kdumpctl, change to: standard_kexec_args="-p -d -s" which adds the -s to select kexec_file_load() syscall. This kernel patchset also supports kexec_load() with a modified kexec userspace utility. A working changeset to the kexec userspace utility is posted to the kexec-tools mailing list here: http://lists.infradead.org/pipermail/kexec/2023-May/027049.html To use the kexec-tools patch, apply, build and install kexec-tools, then change the kdumpctl's standard_kexec_args to replace the -s with --hotplug. The removal of -s reverts to the kexec_load syscall and the addition of --hotplug invokes the changes put forth in the kexec-tools patch. This patch (of 8): The crash hotplug support leans on the work for the kexec_file_load() syscall. To also support the kexec_load() syscall, a few bits of code need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are moved out of kexec_file.c and into a common location crash_core.c. In addition, struct crash_mem and crash_notes were moved to new locales so that PROC_KCORE, which sets CRASH_CORE alone, builds correctly. No functionality change intended. Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:39 +00:00
} else if (p_start != start)
mem->ranges[i].end = p_start - 1;
else
mem->ranges[i].start = p_end + 1;
}
return 0;
}
2024-01-24 05:12:44 +00:00
ssize_t crash_get_memory_size(void)
{
ssize_t size = 0;
if (!kexec_trylock())
return -EBUSY;
size += crash_resource_size(&crashk_res);
size += crash_resource_size(&crashk_low_res);
kexec_unlock();
return size;
}
static int __crash_shrink_memory(struct resource *old_res,
unsigned long new_size)
{
struct resource *ram_res;
ram_res = kzalloc(sizeof(*ram_res), GFP_KERNEL);
if (!ram_res)
return -ENOMEM;
ram_res->start = old_res->start + new_size;
ram_res->end = old_res->end;
ram_res->flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM;
ram_res->name = "System RAM";
if (!new_size) {
release_resource(old_res);
old_res->start = 0;
old_res->end = 0;
} else {
crashk_res.end = ram_res->start - 1;
}
crash_free_reserved_phys_range(ram_res->start, ram_res->end);
insert_resource(&iomem_resource, ram_res);
return 0;
}
int crash_shrink_memory(unsigned long new_size)
{
int ret = 0;
unsigned long old_size, low_size;
if (!kexec_trylock())
return -EBUSY;
if (kexec_crash_image) {
ret = -ENOENT;
goto unlock;
}
low_size = crash_resource_size(&crashk_low_res);
old_size = crash_resource_size(&crashk_res) + low_size;
new_size = roundup(new_size, KEXEC_CRASH_MEM_ALIGN);
if (new_size >= old_size) {
ret = (new_size == old_size) ? 0 : -EINVAL;
goto unlock;
}
/*
* (low_size > new_size) implies that low_size is greater than zero.
* This also means that if low_size is zero, the else branch is taken.
*
* If low_size is greater than 0, (low_size > new_size) indicates that
* crashk_low_res also needs to be shrunken. Otherwise, only crashk_res
* needs to be shrunken.
*/
if (low_size > new_size) {
ret = __crash_shrink_memory(&crashk_res, 0);
if (ret)
goto unlock;
ret = __crash_shrink_memory(&crashk_low_res, new_size);
} else {
ret = __crash_shrink_memory(&crashk_res, new_size - low_size);
}
/* Swap crashk_res and crashk_low_res if needed */
if (!crashk_res.end && crashk_low_res.end) {
crashk_res.start = crashk_low_res.start;
crashk_res.end = crashk_low_res.end;
release_resource(&crashk_low_res);
crashk_low_res.start = 0;
crashk_low_res.end = 0;
insert_resource(&iomem_resource, &crashk_res);
}
unlock:
kexec_unlock();
return ret;
}
void crash_save_cpu(struct pt_regs *regs, int cpu)
{
struct elf_prstatus prstatus;
u32 *buf;
if ((cpu < 0) || (cpu >= nr_cpu_ids))
return;
/* Using ELF notes here is opportunistic.
* I need a well defined structure format
* for the data I pass, and I need tags
* on the data to indicate what information I have
* squirrelled away. ELF notes happen to provide
* all of that, so there is no need to invent something new.
*/
buf = (u32 *)per_cpu_ptr(crash_notes, cpu);
if (!buf)
return;
memset(&prstatus, 0, sizeof(prstatus));
prstatus.common.pr_pid = current->pid;
elf_core_copy_regs(&prstatus.pr_reg, regs);
buf = append_elf_note(buf, KEXEC_CORE_NOTE_NAME, NT_PRSTATUS,
&prstatus, sizeof(prstatus));
final_note(buf);
}
crash: move a few code bits to setup support of crash hotplug Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28. Once the kdump service is loaded, if changes to CPUs or memory occur, either by hot un/plug or off/onlining, the crash elfcorehdr must also be updated. The elfcorehdr describes to kdump the CPUs and memory in the system, and any inaccuracies can result in a vmcore with missing CPU context or memory regions. The current solution utilizes udev to initiate an unload-then-reload of the kdump image (eg. kernel, initrd, boot_params, purgatory and elfcorehdr) by the userspace kexec utility. In the original post I outlined the significant performance problems related to offloading this activity to userspace. This patchset introduces a generic crash handler that registers with the CPU and memory notifiers. Upon CPU or memory changes, from either hot un/plug or off/onlining, this generic handler is invoked and performs important housekeeping, for example obtaining the appropriate lock, and then invokes an architecture specific handler to do the appropriate elfcorehdr update. Note the description in patch 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that enables further optimizations related to CPU plug/unplug/online/offline performance of elfcorehdr updates. In the case of x86_64, the arch specific handler generates a new elfcorehdr, and overwrites the old one in memory; thus no involvement with userspace needed. To realize the benefits/test this patchset, one must make a couple of minor changes to userspace: - Prevent udev from updating kdump crash kernel on hot un/plug changes. Add the following as the first lines to the RHEL udev rule file /usr/lib/udev/rules.d/98-kexec.rules: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" With this changeset applied, the two rules evaluate to false for CPU and memory change events and thus skip the userspace unload-then-reload of kdump. - Change to the kexec_file_load for loading the kdump kernel: Eg. on RHEL: in /usr/bin/kdumpctl, change to: standard_kexec_args="-p -d -s" which adds the -s to select kexec_file_load() syscall. This kernel patchset also supports kexec_load() with a modified kexec userspace utility. A working changeset to the kexec userspace utility is posted to the kexec-tools mailing list here: http://lists.infradead.org/pipermail/kexec/2023-May/027049.html To use the kexec-tools patch, apply, build and install kexec-tools, then change the kdumpctl's standard_kexec_args to replace the -s with --hotplug. The removal of -s reverts to the kexec_load syscall and the addition of --hotplug invokes the changes put forth in the kexec-tools patch. This patch (of 8): The crash hotplug support leans on the work for the kexec_file_load() syscall. To also support the kexec_load() syscall, a few bits of code need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are moved out of kexec_file.c and into a common location crash_core.c. In addition, struct crash_mem and crash_notes were moved to new locales so that PROC_KCORE, which sets CRASH_CORE alone, builds correctly. No functionality change intended. Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:39 +00:00
static int __init crash_notes_memory_init(void)
{
/* Allocate memory for saving cpu registers. */
size_t size, align;
/*
* crash_notes could be allocated across 2 vmalloc pages when percpu
* is vmalloc based . vmalloc doesn't guarantee 2 continuous vmalloc
* pages are also on 2 continuous physical pages. In this case the
* 2nd part of crash_notes in 2nd page could be lost since only the
* starting address and size of crash_notes are exported through sysfs.
* Here round up the size of crash_notes to the nearest power of two
* and pass it to __alloc_percpu as align value. This can make sure
* crash_notes is allocated inside one physical page.
*/
size = sizeof(note_buf_t);
align = min(roundup_pow_of_two(sizeof(note_buf_t)), PAGE_SIZE);
/*
* Break compile if size is bigger than PAGE_SIZE since crash_notes
* definitely will be in 2 pages with that.
*/
BUILD_BUG_ON(size > PAGE_SIZE);
crash_notes = __alloc_percpu(size, align);
if (!crash_notes) {
pr_warn("Memory allocation for saving cpu register states failed\n");
return -ENOMEM;
}
return 0;
}
subsys_initcall(crash_notes_memory_init);
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
2024-01-24 05:12:44 +00:00
#endif /*CONFIG_CRASH_DUMP*/
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
#ifdef CONFIG_CRASH_HOTPLUG
#undef pr_fmt
#define pr_fmt(fmt) "crash hp: " fmt
crash: hotplug support for kexec_load() The hotplug support for kexec_load() requires changes to the userspace kexec-tools and a little extra help from the kernel. Given a kdump capture kernel loaded via kexec_load(), and a subsequent hotplug event, the crash hotplug handler finds the elfcorehdr and rewrites it to reflect the hotplug change. That is the desired outcome, however, at kernel panic time, the purgatory integrity check fails (because the elfcorehdr changed), and the capture kernel does not boot and no vmcore is generated. Therefore, the userspace kexec-tools/kexec must indicate to the kernel that the elfcorehdr can be modified (because the kexec excluded the elfcorehdr from the digest, and sized the elfcorehdr memory buffer appropriately). To facilitate hotplug support with kexec_load(): - a new kexec flag KEXEC_UPATE_ELFCOREHDR indicates that it is safe for the kernel to modify the kexec_load()'d elfcorehdr - the /sys/kernel/crash_elfcorehdr_size node communicates the preferred size of the elfcorehdr memory buffer - The sysfs crash_hotplug nodes (ie. /sys/devices/system/[cpu|memory]/crash_hotplug) dynamically take into account kexec_file_load() vs kexec_load() and KEXEC_UPDATE_ELFCOREHDR. This is critical so that the udev rule processing of crash_hotplug is all that is needed to determine if the userspace unload-then-load of the kdump image is to be skipped, or not. The proposed udev rule change looks like: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" The table below indicates the behavior of kexec_load()'d kdump image updates (with the new udev crash_hotplug rule in place): Kernel |Kexec -------+-----+---- Old |Old |New | a | a -------+-----+---- New | a | b -------+-----+---- where kexec 'old' and 'new' delineate kexec-tools has the needed modifications for the crash hotplug feature, and kernel 'old' and 'new' delineate the kernel supports this crash hotplug feature. Behavior 'a' indicates the unload-then-reload of the entire kdump image. For the kexec 'old' column, the unload-then-reload occurs due to the missing flag KEXEC_UPDATE_ELFCOREHDR. An 'old' kernel (with 'new' kexec) does not present the crash_hotplug sysfs node, which leads to the unload-then-reload of the kdump image. Behavior 'b' indicates the desired optimized behavior of the kernel directly modifying the elfcorehdr and avoiding the unload-then-reload of the kdump image. If the udev rule is not updated with crash_hotplug node check, then no matter any combination of kernel or kexec is new or old, the kdump image continues to be unload-then-reload on hotplug changes. To fully support crash hotplug feature, there needs to be a rollout of kernel, kexec-tools and udev rule changes. However, the order of the rollout of these pieces does not matter; kexec_load()'d kdump images still function for hotplug as-is. Link: https://lkml.kernel.org/r/20230814214446.6659-7-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Suggested-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:44 +00:00
2023-09-26 12:09:05 +00:00
/*
* Different than kexec/kdump loading/unloading/jumping/shrinking which
* usually rarely happen, there will be many crash hotplug events notified
* during one short period, e.g one memory board is hot added and memory
* regions are online. So mutex lock __crash_hotplug_lock is used to
* serialize the crash hotplug handling specifically.
*/
static DEFINE_MUTEX(__crash_hotplug_lock);
2023-09-26 12:09:05 +00:00
#define crash_hotplug_lock() mutex_lock(&__crash_hotplug_lock)
#define crash_hotplug_unlock() mutex_unlock(&__crash_hotplug_lock)
crash: hotplug support for kexec_load() The hotplug support for kexec_load() requires changes to the userspace kexec-tools and a little extra help from the kernel. Given a kdump capture kernel loaded via kexec_load(), and a subsequent hotplug event, the crash hotplug handler finds the elfcorehdr and rewrites it to reflect the hotplug change. That is the desired outcome, however, at kernel panic time, the purgatory integrity check fails (because the elfcorehdr changed), and the capture kernel does not boot and no vmcore is generated. Therefore, the userspace kexec-tools/kexec must indicate to the kernel that the elfcorehdr can be modified (because the kexec excluded the elfcorehdr from the digest, and sized the elfcorehdr memory buffer appropriately). To facilitate hotplug support with kexec_load(): - a new kexec flag KEXEC_UPATE_ELFCOREHDR indicates that it is safe for the kernel to modify the kexec_load()'d elfcorehdr - the /sys/kernel/crash_elfcorehdr_size node communicates the preferred size of the elfcorehdr memory buffer - The sysfs crash_hotplug nodes (ie. /sys/devices/system/[cpu|memory]/crash_hotplug) dynamically take into account kexec_file_load() vs kexec_load() and KEXEC_UPDATE_ELFCOREHDR. This is critical so that the udev rule processing of crash_hotplug is all that is needed to determine if the userspace unload-then-load of the kdump image is to be skipped, or not. The proposed udev rule change looks like: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" The table below indicates the behavior of kexec_load()'d kdump image updates (with the new udev crash_hotplug rule in place): Kernel |Kexec -------+-----+---- Old |Old |New | a | a -------+-----+---- New | a | b -------+-----+---- where kexec 'old' and 'new' delineate kexec-tools has the needed modifications for the crash hotplug feature, and kernel 'old' and 'new' delineate the kernel supports this crash hotplug feature. Behavior 'a' indicates the unload-then-reload of the entire kdump image. For the kexec 'old' column, the unload-then-reload occurs due to the missing flag KEXEC_UPDATE_ELFCOREHDR. An 'old' kernel (with 'new' kexec) does not present the crash_hotplug sysfs node, which leads to the unload-then-reload of the kdump image. Behavior 'b' indicates the desired optimized behavior of the kernel directly modifying the elfcorehdr and avoiding the unload-then-reload of the kdump image. If the udev rule is not updated with crash_hotplug node check, then no matter any combination of kernel or kexec is new or old, the kdump image continues to be unload-then-reload on hotplug changes. To fully support crash hotplug feature, there needs to be a rollout of kernel, kexec-tools and udev rule changes. However, the order of the rollout of these pieces does not matter; kexec_load()'d kdump images still function for hotplug as-is. Link: https://lkml.kernel.org/r/20230814214446.6659-7-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Suggested-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:44 +00:00
/*
* This routine utilized when the crash_hotplug sysfs node is read.
crash: add a new kexec flag for hotplug support Commit a72bbec70da2 ("crash: hotplug support for kexec_load()") introduced a new kexec flag, `KEXEC_UPDATE_ELFCOREHDR`. Kexec tool uses this flag to indicate to the kernel that it is safe to modify the elfcorehdr of the kdump image loaded using the kexec_load system call. However, it is possible that architectures may need to update kexec segments other then elfcorehdr. For example, FDT (Flatten Device Tree) on PowerPC. Introducing a new kexec flag for every new kexec segment may not be a good solution. Hence, a generic kexec flag bit, `KEXEC_CRASH_HOTPLUG_SUPPORT`, is introduced to share the CPU/Memory hotplug support intent between the kexec tool and the kernel for the kexec_load system call. Now we have two kexec flags that enables crash hotplug support for kexec_load system call. First is KEXEC_UPDATE_ELFCOREHDR (only used in x86), and second is KEXEC_CRASH_HOTPLUG_SUPPORT (for all architectures). To simplify the process of finding and reporting the crash hotplug support the following changes are introduced. 1. Define arch specific function to process the kexec flags and determine crash hotplug support 2. Rename the @update_elfcorehdr member of struct kimage to @hotplug_support and populate it for both kexec_load and kexec_file_load syscalls, because architecture can update more than one kexec segment 3. Let generic function crash_check_hotplug_support report hotplug support for loaded kdump image based on value of @hotplug_support To bring the x86 crash hotplug support in line with the above points, the following changes have been made: - Introduce the arch_crash_hotplug_support function to process kexec flags and determine crash hotplug support - Remove the arch_crash_hotplug_[cpu|memory]_support functions Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240326055413.186534-3-sourabhjain@linux.ibm.com
2024-03-26 05:54:09 +00:00
* It reflects the kernel's ability/permission to update the kdump
* image directly.
crash: hotplug support for kexec_load() The hotplug support for kexec_load() requires changes to the userspace kexec-tools and a little extra help from the kernel. Given a kdump capture kernel loaded via kexec_load(), and a subsequent hotplug event, the crash hotplug handler finds the elfcorehdr and rewrites it to reflect the hotplug change. That is the desired outcome, however, at kernel panic time, the purgatory integrity check fails (because the elfcorehdr changed), and the capture kernel does not boot and no vmcore is generated. Therefore, the userspace kexec-tools/kexec must indicate to the kernel that the elfcorehdr can be modified (because the kexec excluded the elfcorehdr from the digest, and sized the elfcorehdr memory buffer appropriately). To facilitate hotplug support with kexec_load(): - a new kexec flag KEXEC_UPATE_ELFCOREHDR indicates that it is safe for the kernel to modify the kexec_load()'d elfcorehdr - the /sys/kernel/crash_elfcorehdr_size node communicates the preferred size of the elfcorehdr memory buffer - The sysfs crash_hotplug nodes (ie. /sys/devices/system/[cpu|memory]/crash_hotplug) dynamically take into account kexec_file_load() vs kexec_load() and KEXEC_UPDATE_ELFCOREHDR. This is critical so that the udev rule processing of crash_hotplug is all that is needed to determine if the userspace unload-then-load of the kdump image is to be skipped, or not. The proposed udev rule change looks like: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" The table below indicates the behavior of kexec_load()'d kdump image updates (with the new udev crash_hotplug rule in place): Kernel |Kexec -------+-----+---- Old |Old |New | a | a -------+-----+---- New | a | b -------+-----+---- where kexec 'old' and 'new' delineate kexec-tools has the needed modifications for the crash hotplug feature, and kernel 'old' and 'new' delineate the kernel supports this crash hotplug feature. Behavior 'a' indicates the unload-then-reload of the entire kdump image. For the kexec 'old' column, the unload-then-reload occurs due to the missing flag KEXEC_UPDATE_ELFCOREHDR. An 'old' kernel (with 'new' kexec) does not present the crash_hotplug sysfs node, which leads to the unload-then-reload of the kdump image. Behavior 'b' indicates the desired optimized behavior of the kernel directly modifying the elfcorehdr and avoiding the unload-then-reload of the kdump image. If the udev rule is not updated with crash_hotplug node check, then no matter any combination of kernel or kexec is new or old, the kdump image continues to be unload-then-reload on hotplug changes. To fully support crash hotplug feature, there needs to be a rollout of kernel, kexec-tools and udev rule changes. However, the order of the rollout of these pieces does not matter; kexec_load()'d kdump images still function for hotplug as-is. Link: https://lkml.kernel.org/r/20230814214446.6659-7-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Suggested-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:44 +00:00
*/
crash: add a new kexec flag for hotplug support Commit a72bbec70da2 ("crash: hotplug support for kexec_load()") introduced a new kexec flag, `KEXEC_UPDATE_ELFCOREHDR`. Kexec tool uses this flag to indicate to the kernel that it is safe to modify the elfcorehdr of the kdump image loaded using the kexec_load system call. However, it is possible that architectures may need to update kexec segments other then elfcorehdr. For example, FDT (Flatten Device Tree) on PowerPC. Introducing a new kexec flag for every new kexec segment may not be a good solution. Hence, a generic kexec flag bit, `KEXEC_CRASH_HOTPLUG_SUPPORT`, is introduced to share the CPU/Memory hotplug support intent between the kexec tool and the kernel for the kexec_load system call. Now we have two kexec flags that enables crash hotplug support for kexec_load system call. First is KEXEC_UPDATE_ELFCOREHDR (only used in x86), and second is KEXEC_CRASH_HOTPLUG_SUPPORT (for all architectures). To simplify the process of finding and reporting the crash hotplug support the following changes are introduced. 1. Define arch specific function to process the kexec flags and determine crash hotplug support 2. Rename the @update_elfcorehdr member of struct kimage to @hotplug_support and populate it for both kexec_load and kexec_file_load syscalls, because architecture can update more than one kexec segment 3. Let generic function crash_check_hotplug_support report hotplug support for loaded kdump image based on value of @hotplug_support To bring the x86 crash hotplug support in line with the above points, the following changes have been made: - Introduce the arch_crash_hotplug_support function to process kexec flags and determine crash hotplug support - Remove the arch_crash_hotplug_[cpu|memory]_support functions Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240326055413.186534-3-sourabhjain@linux.ibm.com
2024-03-26 05:54:09 +00:00
int crash_check_hotplug_support(void)
crash: hotplug support for kexec_load() The hotplug support for kexec_load() requires changes to the userspace kexec-tools and a little extra help from the kernel. Given a kdump capture kernel loaded via kexec_load(), and a subsequent hotplug event, the crash hotplug handler finds the elfcorehdr and rewrites it to reflect the hotplug change. That is the desired outcome, however, at kernel panic time, the purgatory integrity check fails (because the elfcorehdr changed), and the capture kernel does not boot and no vmcore is generated. Therefore, the userspace kexec-tools/kexec must indicate to the kernel that the elfcorehdr can be modified (because the kexec excluded the elfcorehdr from the digest, and sized the elfcorehdr memory buffer appropriately). To facilitate hotplug support with kexec_load(): - a new kexec flag KEXEC_UPATE_ELFCOREHDR indicates that it is safe for the kernel to modify the kexec_load()'d elfcorehdr - the /sys/kernel/crash_elfcorehdr_size node communicates the preferred size of the elfcorehdr memory buffer - The sysfs crash_hotplug nodes (ie. /sys/devices/system/[cpu|memory]/crash_hotplug) dynamically take into account kexec_file_load() vs kexec_load() and KEXEC_UPDATE_ELFCOREHDR. This is critical so that the udev rule processing of crash_hotplug is all that is needed to determine if the userspace unload-then-load of the kdump image is to be skipped, or not. The proposed udev rule change looks like: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" The table below indicates the behavior of kexec_load()'d kdump image updates (with the new udev crash_hotplug rule in place): Kernel |Kexec -------+-----+---- Old |Old |New | a | a -------+-----+---- New | a | b -------+-----+---- where kexec 'old' and 'new' delineate kexec-tools has the needed modifications for the crash hotplug feature, and kernel 'old' and 'new' delineate the kernel supports this crash hotplug feature. Behavior 'a' indicates the unload-then-reload of the entire kdump image. For the kexec 'old' column, the unload-then-reload occurs due to the missing flag KEXEC_UPDATE_ELFCOREHDR. An 'old' kernel (with 'new' kexec) does not present the crash_hotplug sysfs node, which leads to the unload-then-reload of the kdump image. Behavior 'b' indicates the desired optimized behavior of the kernel directly modifying the elfcorehdr and avoiding the unload-then-reload of the kdump image. If the udev rule is not updated with crash_hotplug node check, then no matter any combination of kernel or kexec is new or old, the kdump image continues to be unload-then-reload on hotplug changes. To fully support crash hotplug feature, there needs to be a rollout of kernel, kexec-tools and udev rule changes. However, the order of the rollout of these pieces does not matter; kexec_load()'d kdump images still function for hotplug as-is. Link: https://lkml.kernel.org/r/20230814214446.6659-7-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Suggested-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:44 +00:00
{
int rc = 0;
2023-09-26 12:09:05 +00:00
crash_hotplug_lock();
crash: hotplug support for kexec_load() The hotplug support for kexec_load() requires changes to the userspace kexec-tools and a little extra help from the kernel. Given a kdump capture kernel loaded via kexec_load(), and a subsequent hotplug event, the crash hotplug handler finds the elfcorehdr and rewrites it to reflect the hotplug change. That is the desired outcome, however, at kernel panic time, the purgatory integrity check fails (because the elfcorehdr changed), and the capture kernel does not boot and no vmcore is generated. Therefore, the userspace kexec-tools/kexec must indicate to the kernel that the elfcorehdr can be modified (because the kexec excluded the elfcorehdr from the digest, and sized the elfcorehdr memory buffer appropriately). To facilitate hotplug support with kexec_load(): - a new kexec flag KEXEC_UPATE_ELFCOREHDR indicates that it is safe for the kernel to modify the kexec_load()'d elfcorehdr - the /sys/kernel/crash_elfcorehdr_size node communicates the preferred size of the elfcorehdr memory buffer - The sysfs crash_hotplug nodes (ie. /sys/devices/system/[cpu|memory]/crash_hotplug) dynamically take into account kexec_file_load() vs kexec_load() and KEXEC_UPDATE_ELFCOREHDR. This is critical so that the udev rule processing of crash_hotplug is all that is needed to determine if the userspace unload-then-load of the kdump image is to be skipped, or not. The proposed udev rule change looks like: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" The table below indicates the behavior of kexec_load()'d kdump image updates (with the new udev crash_hotplug rule in place): Kernel |Kexec -------+-----+---- Old |Old |New | a | a -------+-----+---- New | a | b -------+-----+---- where kexec 'old' and 'new' delineate kexec-tools has the needed modifications for the crash hotplug feature, and kernel 'old' and 'new' delineate the kernel supports this crash hotplug feature. Behavior 'a' indicates the unload-then-reload of the entire kdump image. For the kexec 'old' column, the unload-then-reload occurs due to the missing flag KEXEC_UPDATE_ELFCOREHDR. An 'old' kernel (with 'new' kexec) does not present the crash_hotplug sysfs node, which leads to the unload-then-reload of the kdump image. Behavior 'b' indicates the desired optimized behavior of the kernel directly modifying the elfcorehdr and avoiding the unload-then-reload of the kdump image. If the udev rule is not updated with crash_hotplug node check, then no matter any combination of kernel or kexec is new or old, the kdump image continues to be unload-then-reload on hotplug changes. To fully support crash hotplug feature, there needs to be a rollout of kernel, kexec-tools and udev rule changes. However, the order of the rollout of these pieces does not matter; kexec_load()'d kdump images still function for hotplug as-is. Link: https://lkml.kernel.org/r/20230814214446.6659-7-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Suggested-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:44 +00:00
/* Obtain lock while reading crash information */
if (!kexec_trylock()) {
kexec/crash: no crash update when kexec in progress The following errors are observed when kexec is done with SMT=off on powerpc. [ 358.458385] Removing IBM Power 842 compression device [ 374.795734] kexec_core: Starting new kernel [ 374.795748] kexec: Waking offline cpu 1. [ 374.875695] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate [ 374.935833] kexec: Waking offline cpu 2. [ 375.015664] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate snip.. [ 375.515823] kexec: Waking offline cpu 6. [ 375.635667] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate [ 375.695836] kexec: Waking offline cpu 7. To avoid kexec kernel boot failure on PowerPC, all the present CPUs that are offline are brought online during kexec. For more information, refer to commit e8e5c2155b00 ("powerpc/kexec: Fix orphaned offline CPUs across kexec"). Bringing the CPUs online triggers the crash hotplug handler, crash_handle_hotplug_event(), to update the kdump image. Since the system is on the kexec kernel boot path and the kexec lock is held, the crash_handle_hotplug_event() function fails to acquire the same lock to update the kdump image, resulting in the error messages mentioned above. To fix this, return from crash_handle_hotplug_event() without printing the error message if kexec is in progress. The same applies to the crash_check_hotplug_support() function. Return 0 if kexec is in progress because kernel is not in a position to update the kdump image. Link: https://lkml.kernel.org/r/20240921103745.560430-1-sourabhjain@linux.ibm.com Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Baoquan he <bhe@redhat.com> Reported-by: Sachin P Bappalige <sachinpb@linux.vnet.ibm.com> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-09-21 10:37:45 +00:00
if (!kexec_in_progress)
pr_info("kexec_trylock() failed, kdump image may be inaccurate\n");
2023-09-26 12:09:05 +00:00
crash_hotplug_unlock();
crash: hotplug support for kexec_load() The hotplug support for kexec_load() requires changes to the userspace kexec-tools and a little extra help from the kernel. Given a kdump capture kernel loaded via kexec_load(), and a subsequent hotplug event, the crash hotplug handler finds the elfcorehdr and rewrites it to reflect the hotplug change. That is the desired outcome, however, at kernel panic time, the purgatory integrity check fails (because the elfcorehdr changed), and the capture kernel does not boot and no vmcore is generated. Therefore, the userspace kexec-tools/kexec must indicate to the kernel that the elfcorehdr can be modified (because the kexec excluded the elfcorehdr from the digest, and sized the elfcorehdr memory buffer appropriately). To facilitate hotplug support with kexec_load(): - a new kexec flag KEXEC_UPATE_ELFCOREHDR indicates that it is safe for the kernel to modify the kexec_load()'d elfcorehdr - the /sys/kernel/crash_elfcorehdr_size node communicates the preferred size of the elfcorehdr memory buffer - The sysfs crash_hotplug nodes (ie. /sys/devices/system/[cpu|memory]/crash_hotplug) dynamically take into account kexec_file_load() vs kexec_load() and KEXEC_UPDATE_ELFCOREHDR. This is critical so that the udev rule processing of crash_hotplug is all that is needed to determine if the userspace unload-then-load of the kdump image is to be skipped, or not. The proposed udev rule change looks like: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" The table below indicates the behavior of kexec_load()'d kdump image updates (with the new udev crash_hotplug rule in place): Kernel |Kexec -------+-----+---- Old |Old |New | a | a -------+-----+---- New | a | b -------+-----+---- where kexec 'old' and 'new' delineate kexec-tools has the needed modifications for the crash hotplug feature, and kernel 'old' and 'new' delineate the kernel supports this crash hotplug feature. Behavior 'a' indicates the unload-then-reload of the entire kdump image. For the kexec 'old' column, the unload-then-reload occurs due to the missing flag KEXEC_UPDATE_ELFCOREHDR. An 'old' kernel (with 'new' kexec) does not present the crash_hotplug sysfs node, which leads to the unload-then-reload of the kdump image. Behavior 'b' indicates the desired optimized behavior of the kernel directly modifying the elfcorehdr and avoiding the unload-then-reload of the kdump image. If the udev rule is not updated with crash_hotplug node check, then no matter any combination of kernel or kexec is new or old, the kdump image continues to be unload-then-reload on hotplug changes. To fully support crash hotplug feature, there needs to be a rollout of kernel, kexec-tools and udev rule changes. However, the order of the rollout of these pieces does not matter; kexec_load()'d kdump images still function for hotplug as-is. Link: https://lkml.kernel.org/r/20230814214446.6659-7-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Suggested-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:44 +00:00
return 0;
}
if (kexec_crash_image) {
crash: add a new kexec flag for hotplug support Commit a72bbec70da2 ("crash: hotplug support for kexec_load()") introduced a new kexec flag, `KEXEC_UPDATE_ELFCOREHDR`. Kexec tool uses this flag to indicate to the kernel that it is safe to modify the elfcorehdr of the kdump image loaded using the kexec_load system call. However, it is possible that architectures may need to update kexec segments other then elfcorehdr. For example, FDT (Flatten Device Tree) on PowerPC. Introducing a new kexec flag for every new kexec segment may not be a good solution. Hence, a generic kexec flag bit, `KEXEC_CRASH_HOTPLUG_SUPPORT`, is introduced to share the CPU/Memory hotplug support intent between the kexec tool and the kernel for the kexec_load system call. Now we have two kexec flags that enables crash hotplug support for kexec_load system call. First is KEXEC_UPDATE_ELFCOREHDR (only used in x86), and second is KEXEC_CRASH_HOTPLUG_SUPPORT (for all architectures). To simplify the process of finding and reporting the crash hotplug support the following changes are introduced. 1. Define arch specific function to process the kexec flags and determine crash hotplug support 2. Rename the @update_elfcorehdr member of struct kimage to @hotplug_support and populate it for both kexec_load and kexec_file_load syscalls, because architecture can update more than one kexec segment 3. Let generic function crash_check_hotplug_support report hotplug support for loaded kdump image based on value of @hotplug_support To bring the x86 crash hotplug support in line with the above points, the following changes have been made: - Introduce the arch_crash_hotplug_support function to process kexec flags and determine crash hotplug support - Remove the arch_crash_hotplug_[cpu|memory]_support functions Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240326055413.186534-3-sourabhjain@linux.ibm.com
2024-03-26 05:54:09 +00:00
rc = kexec_crash_image->hotplug_support;
crash: hotplug support for kexec_load() The hotplug support for kexec_load() requires changes to the userspace kexec-tools and a little extra help from the kernel. Given a kdump capture kernel loaded via kexec_load(), and a subsequent hotplug event, the crash hotplug handler finds the elfcorehdr and rewrites it to reflect the hotplug change. That is the desired outcome, however, at kernel panic time, the purgatory integrity check fails (because the elfcorehdr changed), and the capture kernel does not boot and no vmcore is generated. Therefore, the userspace kexec-tools/kexec must indicate to the kernel that the elfcorehdr can be modified (because the kexec excluded the elfcorehdr from the digest, and sized the elfcorehdr memory buffer appropriately). To facilitate hotplug support with kexec_load(): - a new kexec flag KEXEC_UPATE_ELFCOREHDR indicates that it is safe for the kernel to modify the kexec_load()'d elfcorehdr - the /sys/kernel/crash_elfcorehdr_size node communicates the preferred size of the elfcorehdr memory buffer - The sysfs crash_hotplug nodes (ie. /sys/devices/system/[cpu|memory]/crash_hotplug) dynamically take into account kexec_file_load() vs kexec_load() and KEXEC_UPDATE_ELFCOREHDR. This is critical so that the udev rule processing of crash_hotplug is all that is needed to determine if the userspace unload-then-load of the kdump image is to be skipped, or not. The proposed udev rule change looks like: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" The table below indicates the behavior of kexec_load()'d kdump image updates (with the new udev crash_hotplug rule in place): Kernel |Kexec -------+-----+---- Old |Old |New | a | a -------+-----+---- New | a | b -------+-----+---- where kexec 'old' and 'new' delineate kexec-tools has the needed modifications for the crash hotplug feature, and kernel 'old' and 'new' delineate the kernel supports this crash hotplug feature. Behavior 'a' indicates the unload-then-reload of the entire kdump image. For the kexec 'old' column, the unload-then-reload occurs due to the missing flag KEXEC_UPDATE_ELFCOREHDR. An 'old' kernel (with 'new' kexec) does not present the crash_hotplug sysfs node, which leads to the unload-then-reload of the kdump image. Behavior 'b' indicates the desired optimized behavior of the kernel directly modifying the elfcorehdr and avoiding the unload-then-reload of the kdump image. If the udev rule is not updated with crash_hotplug node check, then no matter any combination of kernel or kexec is new or old, the kdump image continues to be unload-then-reload on hotplug changes. To fully support crash hotplug feature, there needs to be a rollout of kernel, kexec-tools and udev rule changes. However, the order of the rollout of these pieces does not matter; kexec_load()'d kdump images still function for hotplug as-is. Link: https://lkml.kernel.org/r/20230814214446.6659-7-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Suggested-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:44 +00:00
}
/* Release lock now that update complete */
kexec_unlock();
2023-09-26 12:09:05 +00:00
crash_hotplug_unlock();
crash: hotplug support for kexec_load() The hotplug support for kexec_load() requires changes to the userspace kexec-tools and a little extra help from the kernel. Given a kdump capture kernel loaded via kexec_load(), and a subsequent hotplug event, the crash hotplug handler finds the elfcorehdr and rewrites it to reflect the hotplug change. That is the desired outcome, however, at kernel panic time, the purgatory integrity check fails (because the elfcorehdr changed), and the capture kernel does not boot and no vmcore is generated. Therefore, the userspace kexec-tools/kexec must indicate to the kernel that the elfcorehdr can be modified (because the kexec excluded the elfcorehdr from the digest, and sized the elfcorehdr memory buffer appropriately). To facilitate hotplug support with kexec_load(): - a new kexec flag KEXEC_UPATE_ELFCOREHDR indicates that it is safe for the kernel to modify the kexec_load()'d elfcorehdr - the /sys/kernel/crash_elfcorehdr_size node communicates the preferred size of the elfcorehdr memory buffer - The sysfs crash_hotplug nodes (ie. /sys/devices/system/[cpu|memory]/crash_hotplug) dynamically take into account kexec_file_load() vs kexec_load() and KEXEC_UPDATE_ELFCOREHDR. This is critical so that the udev rule processing of crash_hotplug is all that is needed to determine if the userspace unload-then-load of the kdump image is to be skipped, or not. The proposed udev rule change looks like: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" The table below indicates the behavior of kexec_load()'d kdump image updates (with the new udev crash_hotplug rule in place): Kernel |Kexec -------+-----+---- Old |Old |New | a | a -------+-----+---- New | a | b -------+-----+---- where kexec 'old' and 'new' delineate kexec-tools has the needed modifications for the crash hotplug feature, and kernel 'old' and 'new' delineate the kernel supports this crash hotplug feature. Behavior 'a' indicates the unload-then-reload of the entire kdump image. For the kexec 'old' column, the unload-then-reload occurs due to the missing flag KEXEC_UPDATE_ELFCOREHDR. An 'old' kernel (with 'new' kexec) does not present the crash_hotplug sysfs node, which leads to the unload-then-reload of the kdump image. Behavior 'b' indicates the desired optimized behavior of the kernel directly modifying the elfcorehdr and avoiding the unload-then-reload of the kdump image. If the udev rule is not updated with crash_hotplug node check, then no matter any combination of kernel or kexec is new or old, the kdump image continues to be unload-then-reload on hotplug changes. To fully support crash hotplug feature, there needs to be a rollout of kernel, kexec-tools and udev rule changes. However, the order of the rollout of these pieces does not matter; kexec_load()'d kdump images still function for hotplug as-is. Link: https://lkml.kernel.org/r/20230814214446.6659-7-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Suggested-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:44 +00:00
return rc;
}
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
/*
* To accurately reflect hot un/plug changes of CPU and Memory resources
* (including onling and offlining of those resources), the relevant
* kexec segments must be updated with latest CPU and Memory resources.
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
*
* Architectures must ensure two things for all segments that need
* updating during hotplug events:
*
* 1. Segments must be large enough to accommodate a growing number of
* resources.
* 2. Exclude the segments from SHA verification.
*
* For example, on most architectures, the elfcorehdr (which is passed
* to the crash kernel via the elfcorehdr= parameter) must include the
* new list of CPUs and memory. To make changes to the elfcorehdr, it
* should be large enough to permit a growing number of CPU and Memory
* resources. One can estimate the elfcorehdr memory size based on
* NR_CPUS_DEFAULT and CRASH_MAX_MEMORY_RANGES. The elfcorehdr is
* excluded from SHA verification by default if the architecture
* supports crash hotplug.
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
*/
static void crash_handle_hotplug_event(unsigned int hp_action, unsigned int cpu, void *arg)
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
{
struct kimage *image;
2023-09-26 12:09:05 +00:00
crash_hotplug_lock();
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
/* Obtain lock while changing crash information */
if (!kexec_trylock()) {
kexec/crash: no crash update when kexec in progress The following errors are observed when kexec is done with SMT=off on powerpc. [ 358.458385] Removing IBM Power 842 compression device [ 374.795734] kexec_core: Starting new kernel [ 374.795748] kexec: Waking offline cpu 1. [ 374.875695] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate [ 374.935833] kexec: Waking offline cpu 2. [ 375.015664] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate snip.. [ 375.515823] kexec: Waking offline cpu 6. [ 375.635667] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate [ 375.695836] kexec: Waking offline cpu 7. To avoid kexec kernel boot failure on PowerPC, all the present CPUs that are offline are brought online during kexec. For more information, refer to commit e8e5c2155b00 ("powerpc/kexec: Fix orphaned offline CPUs across kexec"). Bringing the CPUs online triggers the crash hotplug handler, crash_handle_hotplug_event(), to update the kdump image. Since the system is on the kexec kernel boot path and the kexec lock is held, the crash_handle_hotplug_event() function fails to acquire the same lock to update the kdump image, resulting in the error messages mentioned above. To fix this, return from crash_handle_hotplug_event() without printing the error message if kexec is in progress. The same applies to the crash_check_hotplug_support() function. Return 0 if kexec is in progress because kernel is not in a position to update the kdump image. Link: https://lkml.kernel.org/r/20240921103745.560430-1-sourabhjain@linux.ibm.com Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Baoquan he <bhe@redhat.com> Reported-by: Sachin P Bappalige <sachinpb@linux.vnet.ibm.com> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-09-21 10:37:45 +00:00
if (!kexec_in_progress)
pr_info("kexec_trylock() failed, kdump image may be inaccurate\n");
2023-09-26 12:09:05 +00:00
crash_hotplug_unlock();
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
return;
}
/* Check kdump is not loaded */
if (!kexec_crash_image)
goto out;
image = kexec_crash_image;
crash: add a new kexec flag for hotplug support Commit a72bbec70da2 ("crash: hotplug support for kexec_load()") introduced a new kexec flag, `KEXEC_UPDATE_ELFCOREHDR`. Kexec tool uses this flag to indicate to the kernel that it is safe to modify the elfcorehdr of the kdump image loaded using the kexec_load system call. However, it is possible that architectures may need to update kexec segments other then elfcorehdr. For example, FDT (Flatten Device Tree) on PowerPC. Introducing a new kexec flag for every new kexec segment may not be a good solution. Hence, a generic kexec flag bit, `KEXEC_CRASH_HOTPLUG_SUPPORT`, is introduced to share the CPU/Memory hotplug support intent between the kexec tool and the kernel for the kexec_load system call. Now we have two kexec flags that enables crash hotplug support for kexec_load system call. First is KEXEC_UPDATE_ELFCOREHDR (only used in x86), and second is KEXEC_CRASH_HOTPLUG_SUPPORT (for all architectures). To simplify the process of finding and reporting the crash hotplug support the following changes are introduced. 1. Define arch specific function to process the kexec flags and determine crash hotplug support 2. Rename the @update_elfcorehdr member of struct kimage to @hotplug_support and populate it for both kexec_load and kexec_file_load syscalls, because architecture can update more than one kexec segment 3. Let generic function crash_check_hotplug_support report hotplug support for loaded kdump image based on value of @hotplug_support To bring the x86 crash hotplug support in line with the above points, the following changes have been made: - Introduce the arch_crash_hotplug_support function to process kexec flags and determine crash hotplug support - Remove the arch_crash_hotplug_[cpu|memory]_support functions Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240326055413.186534-3-sourabhjain@linux.ibm.com
2024-03-26 05:54:09 +00:00
/* Check that kexec segments update is permitted */
if (!image->hotplug_support)
crash: hotplug support for kexec_load() The hotplug support for kexec_load() requires changes to the userspace kexec-tools and a little extra help from the kernel. Given a kdump capture kernel loaded via kexec_load(), and a subsequent hotplug event, the crash hotplug handler finds the elfcorehdr and rewrites it to reflect the hotplug change. That is the desired outcome, however, at kernel panic time, the purgatory integrity check fails (because the elfcorehdr changed), and the capture kernel does not boot and no vmcore is generated. Therefore, the userspace kexec-tools/kexec must indicate to the kernel that the elfcorehdr can be modified (because the kexec excluded the elfcorehdr from the digest, and sized the elfcorehdr memory buffer appropriately). To facilitate hotplug support with kexec_load(): - a new kexec flag KEXEC_UPATE_ELFCOREHDR indicates that it is safe for the kernel to modify the kexec_load()'d elfcorehdr - the /sys/kernel/crash_elfcorehdr_size node communicates the preferred size of the elfcorehdr memory buffer - The sysfs crash_hotplug nodes (ie. /sys/devices/system/[cpu|memory]/crash_hotplug) dynamically take into account kexec_file_load() vs kexec_load() and KEXEC_UPDATE_ELFCOREHDR. This is critical so that the udev rule processing of crash_hotplug is all that is needed to determine if the userspace unload-then-load of the kdump image is to be skipped, or not. The proposed udev rule change looks like: # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" The table below indicates the behavior of kexec_load()'d kdump image updates (with the new udev crash_hotplug rule in place): Kernel |Kexec -------+-----+---- Old |Old |New | a | a -------+-----+---- New | a | b -------+-----+---- where kexec 'old' and 'new' delineate kexec-tools has the needed modifications for the crash hotplug feature, and kernel 'old' and 'new' delineate the kernel supports this crash hotplug feature. Behavior 'a' indicates the unload-then-reload of the entire kdump image. For the kexec 'old' column, the unload-then-reload occurs due to the missing flag KEXEC_UPDATE_ELFCOREHDR. An 'old' kernel (with 'new' kexec) does not present the crash_hotplug sysfs node, which leads to the unload-then-reload of the kdump image. Behavior 'b' indicates the desired optimized behavior of the kernel directly modifying the elfcorehdr and avoiding the unload-then-reload of the kdump image. If the udev rule is not updated with crash_hotplug node check, then no matter any combination of kernel or kexec is new or old, the kdump image continues to be unload-then-reload on hotplug changes. To fully support crash hotplug feature, there needs to be a rollout of kernel, kexec-tools and udev rule changes. However, the order of the rollout of these pieces does not matter; kexec_load()'d kdump images still function for hotplug as-is. Link: https://lkml.kernel.org/r/20230814214446.6659-7-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Suggested-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:44 +00:00
goto out;
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
if (hp_action == KEXEC_CRASH_HP_ADD_CPU ||
hp_action == KEXEC_CRASH_HP_REMOVE_CPU)
pr_debug("hp_action %u, cpu %u\n", hp_action, cpu);
else
pr_debug("hp_action %u\n", hp_action);
/*
* The elfcorehdr_index is set to -1 when the struct kimage
* is allocated. Find the segment containing the elfcorehdr,
* if not already found.
*/
if (image->elfcorehdr_index < 0) {
unsigned long mem;
unsigned char *ptr;
unsigned int n;
for (n = 0; n < image->nr_segments; n++) {
mem = image->segment[n].mem;
ptr = kmap_local_page(pfn_to_page(mem >> PAGE_SHIFT));
if (ptr) {
/* The segment containing elfcorehdr */
if (memcmp(ptr, ELFMAG, SELFMAG) == 0)
image->elfcorehdr_index = (int)n;
kunmap_local(ptr);
}
}
}
if (image->elfcorehdr_index < 0) {
pr_err("unable to locate elfcorehdr segment");
goto out;
}
/* Needed in order for the segments to be updated */
arch_kexec_unprotect_crashkres();
/* Differentiate between normal load and hotplug update */
image->hp_action = hp_action;
/* Now invoke arch-specific update handler */
arch_crash_handle_hotplug_event(image, arg);
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
/* No longer handling a hotplug event */
image->hp_action = KEXEC_CRASH_HP_NONE;
image->elfcorehdr_updated = true;
/* Change back to read-only */
arch_kexec_protect_crashkres();
/* Errors in the callback is not a reason to rollback state */
out:
/* Release lock now that update complete */
kexec_unlock();
2023-09-26 12:09:05 +00:00
crash_hotplug_unlock();
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
}
static int crash_memhp_notifier(struct notifier_block *nb, unsigned long val, void *arg)
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
{
switch (val) {
case MEM_ONLINE:
crash_handle_hotplug_event(KEXEC_CRASH_HP_ADD_MEMORY,
KEXEC_CRASH_HP_INVALID_CPU, arg);
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
break;
case MEM_OFFLINE:
crash_handle_hotplug_event(KEXEC_CRASH_HP_REMOVE_MEMORY,
KEXEC_CRASH_HP_INVALID_CPU, arg);
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
break;
}
return NOTIFY_OK;
}
static struct notifier_block crash_memhp_nb = {
.notifier_call = crash_memhp_notifier,
.priority = 0
};
static int crash_cpuhp_online(unsigned int cpu)
{
crash_handle_hotplug_event(KEXEC_CRASH_HP_ADD_CPU, cpu, NULL);
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
return 0;
}
static int crash_cpuhp_offline(unsigned int cpu)
{
crash_handle_hotplug_event(KEXEC_CRASH_HP_REMOVE_CPU, cpu, NULL);
crash: add generic infrastructure for crash hotplug support To support crash hotplug, a mechanism is needed to update the crash elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining). The crash elfcorehdr describes the CPUs and memory to be written into the vmcore. To track CPU changes, callbacks are registered with the cpuhp mechanism via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug elfcorehdr update has no explicit ordering requirement (relative to other cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN. CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state in the PREPARE group, just prior to the STARTING group, which is very close to the CPU starting up in a plug/online situation, or stopping in a unplug/ offline situation. This minimizes the window of time during an actual plug/online or unplug/offline situation in which the elfcorehdr would be inaccurate. Note that for a CPU being unplugged or offlined, the CPU will still be present in the list of CPUs generated by crash_prepare_elf64_headers(). However, there is no need to explicitly omit the CPU, see justification in 'crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()'. To track memory changes, a notifier is registered to capture the memblock MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier(). The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event() which performs needed tasks and then dispatches the event to the architecture specific arch_crash_handle_hotplug_event() to update the elfcorehdr with the current state of CPUs and memory. During the process, the kexec_lock is held. Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 21:44:40 +00:00
return 0;
}
static int __init crash_hotplug_init(void)
{
int result = 0;
if (IS_ENABLED(CONFIG_MEMORY_HOTPLUG))
register_memory_notifier(&crash_memhp_nb);
if (IS_ENABLED(CONFIG_HOTPLUG_CPU)) {
result = cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN,
"crash/cpuhp", crash_cpuhp_online, crash_cpuhp_offline);
}
return result;
}
subsys_initcall(crash_hotplug_init);
#endif