linux-stable/mm/debug.c

254 lines
6.4 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* mm/debug.c
*
* mm/ specific debug routines.
*
*/
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/trace_events.h>
#include <linux/memcontrol.h>
mm, tracing: unify mm flags handling in tracepoints and printk In tracepoints, it's possible to print gfp flags in a human-friendly format through a macro show_gfp_flags(), which defines a translation array and passes is to __print_flags(). Since the following patch will introduce support for gfp flags printing in printk(), it would be nice to reuse the array. This is not straightforward, since __print_flags() can't simply reference an array defined in a .c file such as mm/debug.c - it has to be a macro to allow the macro magic to communicate the format to userspace tools such as trace-cmd. The solution is to create a macro __def_gfpflag_names which is used both in show_gfp_flags(), and to define the gfpflag_names[] array in mm/debug.c. On the other hand, mm/debug.c also defines translation tables for page flags and vma flags, and desire was expressed (but not implemented in this series) to use these also from tracepoints. Thus, this patch also renames the events/gfpflags.h file to events/mmflags.h and moves the table definitions there, using the same macro approach as for gfpflags. This allows translating all three kinds of mm-specific flags both in tracepoints and printk. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 21:55:52 +00:00
#include <trace/events/mmflags.h>
mm, page_owner: track and print last migrate reason During migration, page_owner info is now copied with the rest of the page, so the stacktrace leading to free page allocation during migration is overwritten. For debugging purposes, it might be however useful to know that the page has been migrated since its initial allocation. This might happen many times during the lifetime for different reasons and fully tracking this, especially with stacktraces would incur extra memory costs. As a compromise, store and print the migrate_reason of the last migration that occurred to the page. This is enough to distinguish compaction, numa balancing etc. Example page_owner entry after the patch: Page allocated via order 0, mask 0x24200ca(GFP_HIGHUSER_MOVABLE) PFN 628753 type Movable Block 1228 type Movable Flags 0x1fffff80040030(dirty|lru|swapbacked) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b6325>] alloc_pages_vma+0xb5/0x250 [<ffffffff81177491>] shmem_alloc_page+0x61/0x90 [<ffffffff8117a438>] shmem_getpage_gfp+0x678/0x960 [<ffffffff8117c2b9>] shmem_fallocate+0x329/0x440 [<ffffffff811de600>] vfs_fallocate+0x140/0x230 [<ffffffff811df434>] SyS_fallocate+0x44/0x70 [<ffffffff8158cc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 Page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 21:56:18 +00:00
#include <linux/migrate.h>
mm, page_owner: dump page owner info from dump_page() The page_owner mechanism is useful for dealing with memory leaks. By reading /sys/kernel/debug/page_owner one can determine the stack traces leading to allocations of all pages, and find e.g. a buggy driver. This information might be also potentially useful for debugging, such as the VM_BUG_ON_PAGE() calls to dump_page(). So let's print the stored info from dump_page(). Example output: page:ffffea000292f1c0 count:1 mapcount:0 mapping:ffff8800b2f6cc18 index:0x91d flags: 0x1fffff8001002c(referenced|uptodate|lru|mappedtodisk) page dumped because: VM_BUG_ON_PAGE(1) page->mem_cgroup:ffff8801392c5000 page allocated via order 0, migratetype Movable, gfp_mask 0x24213ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD|__GFP_NOWARN|__GFP_NORETRY) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b40c8>] alloc_pages_current+0x88/0x120 [<ffffffff8115e386>] __page_cache_alloc+0xe6/0x120 [<ffffffff8116ba6c>] __do_page_cache_readahead+0xdc/0x240 [<ffffffff8116bd05>] ondemand_readahead+0x135/0x260 [<ffffffff8116be9c>] page_cache_async_readahead+0x6c/0x70 [<ffffffff811604c2>] generic_file_read_iter+0x3f2/0x760 [<ffffffff811e0dc7>] __vfs_read+0xa7/0xd0 page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 21:56:21 +00:00
#include <linux/page_owner.h>
mm: provide kernel parameter to allow disabling page init poisoning Patch series "Address issues slowing persistent memory initialization", v5. The main thing this patch set achieves is that it allows us to initialize each node worth of persistent memory independently. As a result we reduce page init time by about 2 minutes because instead of taking 30 to 40 seconds per node and going through each node one at a time, we process all 4 nodes in parallel in the case of a 12TB persistent memory setup spread evenly over 4 nodes. This patch (of 3): On systems with a large amount of memory it can take a significant amount of time to initialize all of the page structs with the PAGE_POISON_PATTERN value. I have seen it take over 2 minutes to initialize a system with over 12TB of RAM. In order to work around the issue I had to disable CONFIG_DEBUG_VM and then the boot time returned to something much more reasonable as the arch_add_memory call completed in milliseconds versus seconds. However in doing that I had to disable all of the other VM debugging on the system. In order to work around a kernel that might have CONFIG_DEBUG_VM enabled on a system that has a large amount of memory I have added a new kernel parameter named "vm_debug" that can be set to "-" in order to disable it. Link: http://lkml.kernel.org/r/20180925201921.3576.84239.stgit@localhost.localdomain Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 22:07:45 +00:00
#include <linux/ctype.h>
mm, printk: introduce new format string for flags In mm we use several kinds of flags bitfields that are sometimes printed for debugging purposes, or exported to userspace via sysfs. To make them easier to interpret independently on kernel version and config, we want to dump also the symbolic flag names. So far this has been done with repeated calls to pr_cont(), which is unreliable on SMP, and not usable for e.g. sysfs export. To get a more reliable and universal solution, this patch extends printk() format string for pointers to handle the page flags (%pGp), gfp_flags (%pGg) and vma flags (%pGv). Existing users of dump_flag_names() are converted and simplified. It would be possible to pass flags by value instead of pointer, but the %p format string for pointers already has extensions for various kernel structures, so it's a good fit, and the extra indirection in a non-critical path is negligible. [linux@rasmusvillemoes.dk: lots of good implementation suggestions] Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 21:55:56 +00:00
#include "internal.h"
const char *migrate_reason_names[MR_TYPES] = {
mm, page_owner: track and print last migrate reason During migration, page_owner info is now copied with the rest of the page, so the stacktrace leading to free page allocation during migration is overwritten. For debugging purposes, it might be however useful to know that the page has been migrated since its initial allocation. This might happen many times during the lifetime for different reasons and fully tracking this, especially with stacktraces would incur extra memory costs. As a compromise, store and print the migrate_reason of the last migration that occurred to the page. This is enough to distinguish compaction, numa balancing etc. Example page_owner entry after the patch: Page allocated via order 0, mask 0x24200ca(GFP_HIGHUSER_MOVABLE) PFN 628753 type Movable Block 1228 type Movable Flags 0x1fffff80040030(dirty|lru|swapbacked) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b6325>] alloc_pages_vma+0xb5/0x250 [<ffffffff81177491>] shmem_alloc_page+0x61/0x90 [<ffffffff8117a438>] shmem_getpage_gfp+0x678/0x960 [<ffffffff8117c2b9>] shmem_fallocate+0x329/0x440 [<ffffffff811de600>] vfs_fallocate+0x140/0x230 [<ffffffff811df434>] SyS_fallocate+0x44/0x70 [<ffffffff8158cc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 Page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 21:56:18 +00:00
"compaction",
"memory_failure",
"memory_hotplug",
"syscall_or_cpuset",
"mempolicy_mbind",
"numa_misplaced",
"cma",
};
mm, printk: introduce new format string for flags In mm we use several kinds of flags bitfields that are sometimes printed for debugging purposes, or exported to userspace via sysfs. To make them easier to interpret independently on kernel version and config, we want to dump also the symbolic flag names. So far this has been done with repeated calls to pr_cont(), which is unreliable on SMP, and not usable for e.g. sysfs export. To get a more reliable and universal solution, this patch extends printk() format string for pointers to handle the page flags (%pGp), gfp_flags (%pGg) and vma flags (%pGv). Existing users of dump_flag_names() are converted and simplified. It would be possible to pass flags by value instead of pointer, but the %p format string for pointers already has extensions for various kernel structures, so it's a good fit, and the extra indirection in a non-critical path is negligible. [linux@rasmusvillemoes.dk: lots of good implementation suggestions] Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 21:55:56 +00:00
const struct trace_print_flags pageflag_names[] = {
__def_pageflag_names,
{0, NULL}
};
const struct trace_print_flags gfpflag_names[] = {
__def_gfpflag_names,
{0, NULL}
mm, tracing: unify mm flags handling in tracepoints and printk In tracepoints, it's possible to print gfp flags in a human-friendly format through a macro show_gfp_flags(), which defines a translation array and passes is to __print_flags(). Since the following patch will introduce support for gfp flags printing in printk(), it would be nice to reuse the array. This is not straightforward, since __print_flags() can't simply reference an array defined in a .c file such as mm/debug.c - it has to be a macro to allow the macro magic to communicate the format to userspace tools such as trace-cmd. The solution is to create a macro __def_gfpflag_names which is used both in show_gfp_flags(), and to define the gfpflag_names[] array in mm/debug.c. On the other hand, mm/debug.c also defines translation tables for page flags and vma flags, and desire was expressed (but not implemented in this series) to use these also from tracepoints. Thus, this patch also renames the events/gfpflags.h file to events/mmflags.h and moves the table definitions there, using the same macro approach as for gfpflags. This allows translating all three kinds of mm-specific flags both in tracepoints and printk. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 21:55:52 +00:00
};
mm, printk: introduce new format string for flags In mm we use several kinds of flags bitfields that are sometimes printed for debugging purposes, or exported to userspace via sysfs. To make them easier to interpret independently on kernel version and config, we want to dump also the symbolic flag names. So far this has been done with repeated calls to pr_cont(), which is unreliable on SMP, and not usable for e.g. sysfs export. To get a more reliable and universal solution, this patch extends printk() format string for pointers to handle the page flags (%pGp), gfp_flags (%pGg) and vma flags (%pGv). Existing users of dump_flag_names() are converted and simplified. It would be possible to pass flags by value instead of pointer, but the %p format string for pointers already has extensions for various kernel structures, so it's a good fit, and the extra indirection in a non-critical path is negligible. [linux@rasmusvillemoes.dk: lots of good implementation suggestions] Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 21:55:56 +00:00
const struct trace_print_flags vmaflag_names[] = {
__def_vmaflag_names,
{0, NULL}
};
void __dump_page(struct page *page, const char *reason)
{
mm/debug.c: fix __dump_page() for poisoned pages Evaluating page_mapping() on a poisoned page ends up dereferencing junk and making PF_POISONED_CHECK() considerably crashier than intended: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000006 Mem abort info: ESR = 0x96000005 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c2f6ac38 [0000000000000006] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 491 Comm: bash Not tainted 5.0.0-rc1+ #1 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Dec 17 2018 pstate: 00000005 (nzcv daif -PAN -UAO) pc : page_mapping+0x18/0x118 lr : __dump_page+0x1c/0x398 Process bash (pid: 491, stack limit = 0x000000004ebd4ecd) Call trace: page_mapping+0x18/0x118 __dump_page+0x1c/0x398 dump_page+0xc/0x18 remove_store+0xbc/0x120 dev_attr_store+0x18/0x28 sysfs_kf_write+0x40/0x50 kernfs_fop_write+0x130/0x1d8 __vfs_write+0x30/0x180 vfs_write+0xb4/0x1a0 ksys_write+0x60/0xd0 __arm64_sys_write+0x18/0x20 el0_svc_common+0x94/0xf8 el0_svc_handler+0x68/0x70 el0_svc+0x8/0xc Code: f9400401 d1000422 f240003f 9a801040 (f9400402) ---[ end trace cdb5eb5bf435cecb ]--- Fix that by not inspecting the mapping until we've determined that it's likely to be valid. Now the above condition still ends up stopping the kernel, but in the correct manner: page:ffffffbf20000000 is uninitialized and poisoned raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) ------------[ cut here ]------------ kernel BUG at ./include/linux/mm.h:1006! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 483 Comm: bash Not tainted 5.0.0-rc1+ #3 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Dec 17 2018 pstate: 40000005 (nZcv daif -PAN -UAO) pc : remove_store+0xbc/0x120 lr : remove_store+0xbc/0x120 ... Link: http://lkml.kernel.org/r/03b53ee9d7e76cda4b9b5e1e31eea080db033396.1550071778.git.robin.murphy@arm.com Fixes: 1c6fb1d89e73 ("mm: print more information about mapping in __dump_page") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-21 06:19:45 +00:00
struct address_space *mapping;
bool page_poisoned = PagePoisoned(page);
mm/hotplug: silence a lockdep splat with printk() It is not that hard to trigger lockdep splats by calling printk from under zone->lock. Most of them are false positives caused by lock chains introduced early in the boot process and they do not cause any real problems (although most of the early boot lock dependencies could happen after boot as well). There are some console drivers which do allocate from the printk context as well and those should be fixed. In any case, false positives are not that trivial to workaround and it is far from optimal to lose lockdep functionality for something that is a non-issue. So change has_unmovable_pages() so that it no longer calls dump_page() itself - instead it returns a "struct page *" of the unmovable page back to the caller so that in the case of a has_unmovable_pages() failure, the caller can call dump_page() after releasing zone->lock. Also, make dump_page() is able to report a CMA page as well, so the reason string from has_unmovable_pages() can be removed. Even though has_unmovable_pages doesn't hold any reference to the returned page this should be reasonably safe for the purpose of reporting the page (dump_page) because it cannot be hotremoved in the context of memory unplug. The state of the page might change but that is the case even with the existing code as zone->lock only plays role for free pages. While at it, remove a similar but unnecessary debug-only printk() as well. A sample of one of those lockdep splats is, WARNING: possible circular locking dependency detected ------------------------------------------------------ test.sh/8653 is trying to acquire lock: ffffffff865a4460 (console_owner){-.-.}, at: console_unlock+0x207/0x750 but task is already holding lock: ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at: __offline_isolated_pages+0x179/0x3e0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&(&zone->lock)->rlock){-.-.}: __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 _raw_spin_lock+0x2f/0x40 rmqueue_bulk.constprop.21+0xb6/0x1160 get_page_from_freelist+0x898/0x22c0 __alloc_pages_nodemask+0x2f3/0x1cd0 alloc_pages_current+0x9c/0x110 allocate_slab+0x4c6/0x19c0 new_slab+0x46/0x70 ___slab_alloc+0x58b/0x960 __slab_alloc+0x43/0x70 __kmalloc+0x3ad/0x4b0 __tty_buffer_request_room+0x100/0x250 tty_insert_flip_string_fixed_flag+0x67/0x110 pty_write+0xa2/0xf0 n_tty_write+0x36b/0x7b0 tty_write+0x284/0x4c0 __vfs_write+0x50/0xa0 vfs_write+0x105/0x290 redirected_tty_write+0x6a/0xc0 do_iter_write+0x248/0x2a0 vfs_writev+0x106/0x1e0 do_writev+0xd4/0x180 __x64_sys_writev+0x45/0x50 do_syscall_64+0xcc/0x76c entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #2 (&(&port->lock)->rlock){-.-.}: __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 _raw_spin_lock_irqsave+0x3a/0x50 tty_port_tty_get+0x20/0x60 tty_port_default_wakeup+0xf/0x30 tty_port_tty_wakeup+0x39/0x40 uart_write_wakeup+0x2a/0x40 serial8250_tx_chars+0x22e/0x440 serial8250_handle_irq.part.8+0x14a/0x170 serial8250_default_handle_irq+0x5c/0x90 serial8250_interrupt+0xa6/0x130 __handle_irq_event_percpu+0x78/0x4f0 handle_irq_event_percpu+0x70/0x100 handle_irq_event+0x5a/0x8b handle_edge_irq+0x117/0x370 do_IRQ+0x9e/0x1e0 ret_from_intr+0x0/0x2a cpuidle_enter_state+0x156/0x8e0 cpuidle_enter+0x41/0x70 call_cpuidle+0x5e/0x90 do_idle+0x333/0x370 cpu_startup_entry+0x1d/0x1f start_secondary+0x290/0x330 secondary_startup_64+0xb6/0xc0 -> #1 (&port_lock_key){-.-.}: __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 _raw_spin_lock_irqsave+0x3a/0x50 serial8250_console_write+0x3e4/0x450 univ8250_console_write+0x4b/0x60 console_unlock+0x501/0x750 vprintk_emit+0x10d/0x340 vprintk_default+0x1f/0x30 vprintk_func+0x44/0xd4 printk+0x9f/0xc5 -> #0 (console_owner){-.-.}: check_prev_add+0x107/0xea0 validate_chain+0x8fc/0x1200 __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 console_unlock+0x269/0x750 vprintk_emit+0x10d/0x340 vprintk_default+0x1f/0x30 vprintk_func+0x44/0xd4 printk+0x9f/0xc5 __offline_isolated_pages.cold.52+0x2f/0x30a offline_isolated_pages_cb+0x17/0x30 walk_system_ram_range+0xda/0x160 __offline_pages+0x79c/0xa10 offline_pages+0x11/0x20 memory_subsys_offline+0x7e/0xc0 device_offline+0xd5/0x110 state_store+0xc6/0xe0 dev_attr_store+0x3f/0x60 sysfs_kf_write+0x89/0xb0 kernfs_fop_write+0x188/0x240 __vfs_write+0x50/0xa0 vfs_write+0x105/0x290 ksys_write+0xc6/0x160 __x64_sys_write+0x43/0x50 do_syscall_64+0xcc/0x76c entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: console_owner --> &(&port->lock)->rlock --> &(&zone->lock)->rlock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&zone->lock)->rlock); lock(&(&port->lock)->rlock); lock(&(&zone->lock)->rlock); lock(console_owner); *** DEADLOCK *** 9 locks held by test.sh/8653: #0: ffff88839ba7d408 (sb_writers#4){.+.+}, at: vfs_write+0x25f/0x290 #1: ffff888277618880 (&of->mutex){+.+.}, at: kernfs_fop_write+0x128/0x240 #2: ffff8898131fc218 (kn->count#115){.+.+}, at: kernfs_fop_write+0x138/0x240 #3: ffffffff86962a80 (device_hotplug_lock){+.+.}, at: lock_device_hotplug_sysfs+0x16/0x50 #4: ffff8884374f4990 (&dev->mutex){....}, at: device_offline+0x70/0x110 #5: ffffffff86515250 (cpu_hotplug_lock.rw_sem){++++}, at: __offline_pages+0xbf/0xa10 #6: ffffffff867405f0 (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x87/0x2f0 #7: ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at: __offline_isolated_pages+0x179/0x3e0 #8: ffffffff865a4920 (console_lock){+.+.}, at: vprintk_emit+0x100/0x340 stack backtrace: Hardware name: HPE ProLiant DL560 Gen10/ProLiant DL560 Gen10, BIOS U34 05/21/2019 Call Trace: dump_stack+0x86/0xca print_circular_bug.cold.31+0x243/0x26e check_noncircular+0x29e/0x2e0 check_prev_add+0x107/0xea0 validate_chain+0x8fc/0x1200 __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 console_unlock+0x269/0x750 vprintk_emit+0x10d/0x340 vprintk_default+0x1f/0x30 vprintk_func+0x44/0xd4 printk+0x9f/0xc5 __offline_isolated_pages.cold.52+0x2f/0x30a offline_isolated_pages_cb+0x17/0x30 walk_system_ram_range+0xda/0x160 __offline_pages+0x79c/0xa10 offline_pages+0x11/0x20 memory_subsys_offline+0x7e/0xc0 device_offline+0xd5/0x110 state_store+0xc6/0xe0 dev_attr_store+0x3f/0x60 sysfs_kf_write+0x89/0xb0 kernfs_fop_write+0x188/0x240 __vfs_write+0x50/0xa0 vfs_write+0x105/0x290 ksys_write+0xc6/0x160 __x64_sys_write+0x43/0x50 do_syscall_64+0xcc/0x76c entry_SYSCALL_64_after_hwframe+0x49/0xbe Link: http://lkml.kernel.org/r/20200117181200.20299-1-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 06:14:57 +00:00
/*
* Accessing the pageblock without the zone lock. It could change to
* "isolate" again in the meantime, but since we are just dumping the
* state for debugging, it should be fine to accept a bit of
* inaccuracy here due to racing.
*/
bool page_cma = is_migrate_cma_page(page);
int mapcount;
char *type = "";
/*
* If struct page is poisoned don't access Page*() functions as that
* leads to recursive loop. Page*() check for poisoned pages, and calls
* dump_page() when detected.
*/
if (page_poisoned) {
2018-12-28 08:33:42 +00:00
pr_warn("page:%px is uninitialized and poisoned", page);
goto hex_only;
}
mm/debug.c: fix __dump_page() for poisoned pages Evaluating page_mapping() on a poisoned page ends up dereferencing junk and making PF_POISONED_CHECK() considerably crashier than intended: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000006 Mem abort info: ESR = 0x96000005 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c2f6ac38 [0000000000000006] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 491 Comm: bash Not tainted 5.0.0-rc1+ #1 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Dec 17 2018 pstate: 00000005 (nzcv daif -PAN -UAO) pc : page_mapping+0x18/0x118 lr : __dump_page+0x1c/0x398 Process bash (pid: 491, stack limit = 0x000000004ebd4ecd) Call trace: page_mapping+0x18/0x118 __dump_page+0x1c/0x398 dump_page+0xc/0x18 remove_store+0xbc/0x120 dev_attr_store+0x18/0x28 sysfs_kf_write+0x40/0x50 kernfs_fop_write+0x130/0x1d8 __vfs_write+0x30/0x180 vfs_write+0xb4/0x1a0 ksys_write+0x60/0xd0 __arm64_sys_write+0x18/0x20 el0_svc_common+0x94/0xf8 el0_svc_handler+0x68/0x70 el0_svc+0x8/0xc Code: f9400401 d1000422 f240003f 9a801040 (f9400402) ---[ end trace cdb5eb5bf435cecb ]--- Fix that by not inspecting the mapping until we've determined that it's likely to be valid. Now the above condition still ends up stopping the kernel, but in the correct manner: page:ffffffbf20000000 is uninitialized and poisoned raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) ------------[ cut here ]------------ kernel BUG at ./include/linux/mm.h:1006! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 483 Comm: bash Not tainted 5.0.0-rc1+ #3 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Dec 17 2018 pstate: 40000005 (nZcv daif -PAN -UAO) pc : remove_store+0xbc/0x120 lr : remove_store+0xbc/0x120 ... Link: http://lkml.kernel.org/r/03b53ee9d7e76cda4b9b5e1e31eea080db033396.1550071778.git.robin.murphy@arm.com Fixes: 1c6fb1d89e73 ("mm: print more information about mapping in __dump_page") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-21 06:19:45 +00:00
mapping = page_mapping(page);
/*
* Avoid VM_BUG_ON() in page_mapcount().
* page->_mapcount space in struct page is used by sl[aou]b pages to
* encode own info.
*/
mapcount = PageSlab(page) ? 0 : page_mapcount(page);
mm: rework mapcount accounting to enable 4k mapping of THPs We're going to allow mapping of individual 4k pages of THP compound. It means we need to track mapcount on per small page basis. Straight-forward approach is to use ->_mapcount in all subpages to track how many time this subpage is mapped with PMDs or PTEs combined. But this is rather expensive: mapping or unmapping of a THP page with PMD would require HPAGE_PMD_NR atomic operations instead of single we have now. The idea is to store separately how many times the page was mapped as whole -- compound_mapcount. This frees up ->_mapcount in subpages to track PTE mapcount. We use the same approach as with compound page destructor and compound order to store compound_mapcount: use space in first tail page, ->mapping this time. Any time we map/unmap whole compound page (THP or hugetlb) -- we increment/decrement compound_mapcount. When we map part of compound page with PTE we operate on ->_mapcount of the subpage. page_mapcount() counts both: PTE and PMD mappings of the page. Basically, we have mapcount for a subpage spread over two counters. It makes tricky to detect when last mapcount for a page goes away. We introduced PageDoubleMap() for this. When we split THP PMD for the first time and there's other PMD mapping left we offset up ->_mapcount in all subpages by one and set PG_double_map on the compound page. These additional references go away with last compound_mapcount. This approach provides a way to detect when last mapcount goes away on per small page basis without introducing new overhead for most common cases. [akpm@linux-foundation.org: fix typo in comment] [mhocko@suse.com: ignore partial THP when moving task] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:53:42 +00:00
if (PageCompound(page))
pr_warn("page:%px refcount:%d mapcount:%d mapping:%px "
"index:%#lx compound_mapcount: %d\n",
page, page_ref_count(page), mapcount,
page->mapping, page_to_pgoff(page),
compound_mapcount(page));
else
pr_warn("page:%px refcount:%d mapcount:%d mapping:%px index:%#lx\n",
page, page_ref_count(page), mapcount,
page->mapping, page_to_pgoff(page));
if (PageKsm(page))
type = "ksm ";
else if (PageAnon(page))
type = "anon ";
mm: print more information about mapping in __dump_page I have been promissing to improve memory offlining failures debugging for quite some time. As things stand now we get only very limited information in the kernel log when the offlining fails. It is usually only [ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed with no further details. We do not know what exactly fails and for what reason. Whenever I was forced to debug such a failure I've always had to do a debugging patch to tell me more. We can enable some tracepoints but it would be much better to get a better picture without using them. This patch series does 2 things. The first one is to make dump_page more usable by printing more information about the mapping patch 1. Then it reduces the log level from emerg to warning so that this function is usable from less critical context patch 2. Then I have added more detailed information about the offlining failure patch 4 and finally add dump_page to isolation and offlining migration paths. Patch 3 is a trivial cleanup. This patch (of 6): __dump_page prints the mapping pointer but that is quite unhelpful for many reports because the pointer itself only helps to distinguish anon/ksm mappings from other ones (because of lowest bits set). Sometimes it would be much more helpful to know what kind of mapping that is actually and if we know this is a file mapping then also try to resolve the dentry name. [dan.carpenter@oracle.com: fix a width vs precision bug in printk] Link: http://lkml.kernel.org/r/20181123072135.gqvblm2vdujbvfjs@kili.mountain [mhocko@kernel.org: use %dp to print dentry] Link: http://lkml.kernel.org/r/20181125080834.GB12455@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20181107101830.17405-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Oscar Salvador <OSalvador@suse.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 08:33:38 +00:00
else if (mapping) {
if (mapping->host && mapping->host->i_dentry.first) {
mm: print more information about mapping in __dump_page I have been promissing to improve memory offlining failures debugging for quite some time. As things stand now we get only very limited information in the kernel log when the offlining fails. It is usually only [ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed with no further details. We do not know what exactly fails and for what reason. Whenever I was forced to debug such a failure I've always had to do a debugging patch to tell me more. We can enable some tracepoints but it would be much better to get a better picture without using them. This patch series does 2 things. The first one is to make dump_page more usable by printing more information about the mapping patch 1. Then it reduces the log level from emerg to warning so that this function is usable from less critical context patch 2. Then I have added more detailed information about the offlining failure patch 4 and finally add dump_page to isolation and offlining migration paths. Patch 3 is a trivial cleanup. This patch (of 6): __dump_page prints the mapping pointer but that is quite unhelpful for many reports because the pointer itself only helps to distinguish anon/ksm mappings from other ones (because of lowest bits set). Sometimes it would be much more helpful to know what kind of mapping that is actually and if we know this is a file mapping then also try to resolve the dentry name. [dan.carpenter@oracle.com: fix a width vs precision bug in printk] Link: http://lkml.kernel.org/r/20181123072135.gqvblm2vdujbvfjs@kili.mountain [mhocko@kernel.org: use %dp to print dentry] Link: http://lkml.kernel.org/r/20181125080834.GB12455@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20181107101830.17405-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Oscar Salvador <OSalvador@suse.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 08:33:38 +00:00
struct dentry *dentry;
dentry = container_of(mapping->host->i_dentry.first, struct dentry, d_u.d_alias);
pr_warn("%ps name:\"%pd\"\n", mapping->a_ops, dentry);
} else
pr_warn("%ps\n", mapping->a_ops);
mm: print more information about mapping in __dump_page I have been promissing to improve memory offlining failures debugging for quite some time. As things stand now we get only very limited information in the kernel log when the offlining fails. It is usually only [ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed with no further details. We do not know what exactly fails and for what reason. Whenever I was forced to debug such a failure I've always had to do a debugging patch to tell me more. We can enable some tracepoints but it would be much better to get a better picture without using them. This patch series does 2 things. The first one is to make dump_page more usable by printing more information about the mapping patch 1. Then it reduces the log level from emerg to warning so that this function is usable from less critical context patch 2. Then I have added more detailed information about the offlining failure patch 4 and finally add dump_page to isolation and offlining migration paths. Patch 3 is a trivial cleanup. This patch (of 6): __dump_page prints the mapping pointer but that is quite unhelpful for many reports because the pointer itself only helps to distinguish anon/ksm mappings from other ones (because of lowest bits set). Sometimes it would be much more helpful to know what kind of mapping that is actually and if we know this is a file mapping then also try to resolve the dentry name. [dan.carpenter@oracle.com: fix a width vs precision bug in printk] Link: http://lkml.kernel.org/r/20181123072135.gqvblm2vdujbvfjs@kili.mountain [mhocko@kernel.org: use %dp to print dentry] Link: http://lkml.kernel.org/r/20181125080834.GB12455@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20181107101830.17405-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Oscar Salvador <OSalvador@suse.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 08:33:38 +00:00
}
mm, printk: introduce new format string for flags In mm we use several kinds of flags bitfields that are sometimes printed for debugging purposes, or exported to userspace via sysfs. To make them easier to interpret independently on kernel version and config, we want to dump also the symbolic flag names. So far this has been done with repeated calls to pr_cont(), which is unreliable on SMP, and not usable for e.g. sysfs export. To get a more reliable and universal solution, this patch extends printk() format string for pointers to handle the page flags (%pGp), gfp_flags (%pGg) and vma flags (%pGv). Existing users of dump_flag_names() are converted and simplified. It would be possible to pass flags by value instead of pointer, but the %p format string for pointers already has extensions for various kernel structures, so it's a good fit, and the extra indirection in a non-critical path is negligible. [linux@rasmusvillemoes.dk: lots of good implementation suggestions] Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 21:55:56 +00:00
BUILD_BUG_ON(ARRAY_SIZE(pageflag_names) != __NR_PAGEFLAGS + 1);
mm/hotplug: silence a lockdep splat with printk() It is not that hard to trigger lockdep splats by calling printk from under zone->lock. Most of them are false positives caused by lock chains introduced early in the boot process and they do not cause any real problems (although most of the early boot lock dependencies could happen after boot as well). There are some console drivers which do allocate from the printk context as well and those should be fixed. In any case, false positives are not that trivial to workaround and it is far from optimal to lose lockdep functionality for something that is a non-issue. So change has_unmovable_pages() so that it no longer calls dump_page() itself - instead it returns a "struct page *" of the unmovable page back to the caller so that in the case of a has_unmovable_pages() failure, the caller can call dump_page() after releasing zone->lock. Also, make dump_page() is able to report a CMA page as well, so the reason string from has_unmovable_pages() can be removed. Even though has_unmovable_pages doesn't hold any reference to the returned page this should be reasonably safe for the purpose of reporting the page (dump_page) because it cannot be hotremoved in the context of memory unplug. The state of the page might change but that is the case even with the existing code as zone->lock only plays role for free pages. While at it, remove a similar but unnecessary debug-only printk() as well. A sample of one of those lockdep splats is, WARNING: possible circular locking dependency detected ------------------------------------------------------ test.sh/8653 is trying to acquire lock: ffffffff865a4460 (console_owner){-.-.}, at: console_unlock+0x207/0x750 but task is already holding lock: ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at: __offline_isolated_pages+0x179/0x3e0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&(&zone->lock)->rlock){-.-.}: __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 _raw_spin_lock+0x2f/0x40 rmqueue_bulk.constprop.21+0xb6/0x1160 get_page_from_freelist+0x898/0x22c0 __alloc_pages_nodemask+0x2f3/0x1cd0 alloc_pages_current+0x9c/0x110 allocate_slab+0x4c6/0x19c0 new_slab+0x46/0x70 ___slab_alloc+0x58b/0x960 __slab_alloc+0x43/0x70 __kmalloc+0x3ad/0x4b0 __tty_buffer_request_room+0x100/0x250 tty_insert_flip_string_fixed_flag+0x67/0x110 pty_write+0xa2/0xf0 n_tty_write+0x36b/0x7b0 tty_write+0x284/0x4c0 __vfs_write+0x50/0xa0 vfs_write+0x105/0x290 redirected_tty_write+0x6a/0xc0 do_iter_write+0x248/0x2a0 vfs_writev+0x106/0x1e0 do_writev+0xd4/0x180 __x64_sys_writev+0x45/0x50 do_syscall_64+0xcc/0x76c entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #2 (&(&port->lock)->rlock){-.-.}: __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 _raw_spin_lock_irqsave+0x3a/0x50 tty_port_tty_get+0x20/0x60 tty_port_default_wakeup+0xf/0x30 tty_port_tty_wakeup+0x39/0x40 uart_write_wakeup+0x2a/0x40 serial8250_tx_chars+0x22e/0x440 serial8250_handle_irq.part.8+0x14a/0x170 serial8250_default_handle_irq+0x5c/0x90 serial8250_interrupt+0xa6/0x130 __handle_irq_event_percpu+0x78/0x4f0 handle_irq_event_percpu+0x70/0x100 handle_irq_event+0x5a/0x8b handle_edge_irq+0x117/0x370 do_IRQ+0x9e/0x1e0 ret_from_intr+0x0/0x2a cpuidle_enter_state+0x156/0x8e0 cpuidle_enter+0x41/0x70 call_cpuidle+0x5e/0x90 do_idle+0x333/0x370 cpu_startup_entry+0x1d/0x1f start_secondary+0x290/0x330 secondary_startup_64+0xb6/0xc0 -> #1 (&port_lock_key){-.-.}: __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 _raw_spin_lock_irqsave+0x3a/0x50 serial8250_console_write+0x3e4/0x450 univ8250_console_write+0x4b/0x60 console_unlock+0x501/0x750 vprintk_emit+0x10d/0x340 vprintk_default+0x1f/0x30 vprintk_func+0x44/0xd4 printk+0x9f/0xc5 -> #0 (console_owner){-.-.}: check_prev_add+0x107/0xea0 validate_chain+0x8fc/0x1200 __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 console_unlock+0x269/0x750 vprintk_emit+0x10d/0x340 vprintk_default+0x1f/0x30 vprintk_func+0x44/0xd4 printk+0x9f/0xc5 __offline_isolated_pages.cold.52+0x2f/0x30a offline_isolated_pages_cb+0x17/0x30 walk_system_ram_range+0xda/0x160 __offline_pages+0x79c/0xa10 offline_pages+0x11/0x20 memory_subsys_offline+0x7e/0xc0 device_offline+0xd5/0x110 state_store+0xc6/0xe0 dev_attr_store+0x3f/0x60 sysfs_kf_write+0x89/0xb0 kernfs_fop_write+0x188/0x240 __vfs_write+0x50/0xa0 vfs_write+0x105/0x290 ksys_write+0xc6/0x160 __x64_sys_write+0x43/0x50 do_syscall_64+0xcc/0x76c entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: console_owner --> &(&port->lock)->rlock --> &(&zone->lock)->rlock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&zone->lock)->rlock); lock(&(&port->lock)->rlock); lock(&(&zone->lock)->rlock); lock(console_owner); *** DEADLOCK *** 9 locks held by test.sh/8653: #0: ffff88839ba7d408 (sb_writers#4){.+.+}, at: vfs_write+0x25f/0x290 #1: ffff888277618880 (&of->mutex){+.+.}, at: kernfs_fop_write+0x128/0x240 #2: ffff8898131fc218 (kn->count#115){.+.+}, at: kernfs_fop_write+0x138/0x240 #3: ffffffff86962a80 (device_hotplug_lock){+.+.}, at: lock_device_hotplug_sysfs+0x16/0x50 #4: ffff8884374f4990 (&dev->mutex){....}, at: device_offline+0x70/0x110 #5: ffffffff86515250 (cpu_hotplug_lock.rw_sem){++++}, at: __offline_pages+0xbf/0xa10 #6: ffffffff867405f0 (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x87/0x2f0 #7: ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at: __offline_isolated_pages+0x179/0x3e0 #8: ffffffff865a4920 (console_lock){+.+.}, at: vprintk_emit+0x100/0x340 stack backtrace: Hardware name: HPE ProLiant DL560 Gen10/ProLiant DL560 Gen10, BIOS U34 05/21/2019 Call Trace: dump_stack+0x86/0xca print_circular_bug.cold.31+0x243/0x26e check_noncircular+0x29e/0x2e0 check_prev_add+0x107/0xea0 validate_chain+0x8fc/0x1200 __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 console_unlock+0x269/0x750 vprintk_emit+0x10d/0x340 vprintk_default+0x1f/0x30 vprintk_func+0x44/0xd4 printk+0x9f/0xc5 __offline_isolated_pages.cold.52+0x2f/0x30a offline_isolated_pages_cb+0x17/0x30 walk_system_ram_range+0xda/0x160 __offline_pages+0x79c/0xa10 offline_pages+0x11/0x20 memory_subsys_offline+0x7e/0xc0 device_offline+0xd5/0x110 state_store+0xc6/0xe0 dev_attr_store+0x3f/0x60 sysfs_kf_write+0x89/0xb0 kernfs_fop_write+0x188/0x240 __vfs_write+0x50/0xa0 vfs_write+0x105/0x290 ksys_write+0xc6/0x160 __x64_sys_write+0x43/0x50 do_syscall_64+0xcc/0x76c entry_SYSCALL_64_after_hwframe+0x49/0xbe Link: http://lkml.kernel.org/r/20200117181200.20299-1-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 06:14:57 +00:00
pr_warn("%sflags: %#lx(%pGp)%s\n", type, page->flags, &page->flags,
page_cma ? " CMA" : "");
hex_only:
2018-12-28 08:33:42 +00:00
print_hex_dump(KERN_WARNING, "raw: ", DUMP_PREFIX_NONE, 32,
2016-12-13 00:44:35 +00:00
sizeof(unsigned long), page,
sizeof(struct page), false);
if (reason)
2018-12-28 08:33:42 +00:00
pr_warn("page dumped because: %s\n", reason);
#ifdef CONFIG_MEMCG
if (!page_poisoned && page->mem_cgroup)
2018-12-28 08:33:42 +00:00
pr_warn("page->mem_cgroup:%px\n", page->mem_cgroup);
#endif
}
void dump_page(struct page *page, const char *reason)
{
__dump_page(page, reason);
mm, page_owner: dump page owner info from dump_page() The page_owner mechanism is useful for dealing with memory leaks. By reading /sys/kernel/debug/page_owner one can determine the stack traces leading to allocations of all pages, and find e.g. a buggy driver. This information might be also potentially useful for debugging, such as the VM_BUG_ON_PAGE() calls to dump_page(). So let's print the stored info from dump_page(). Example output: page:ffffea000292f1c0 count:1 mapcount:0 mapping:ffff8800b2f6cc18 index:0x91d flags: 0x1fffff8001002c(referenced|uptodate|lru|mappedtodisk) page dumped because: VM_BUG_ON_PAGE(1) page->mem_cgroup:ffff8801392c5000 page allocated via order 0, migratetype Movable, gfp_mask 0x24213ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD|__GFP_NOWARN|__GFP_NORETRY) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b40c8>] alloc_pages_current+0x88/0x120 [<ffffffff8115e386>] __page_cache_alloc+0xe6/0x120 [<ffffffff8116ba6c>] __do_page_cache_readahead+0xdc/0x240 [<ffffffff8116bd05>] ondemand_readahead+0x135/0x260 [<ffffffff8116be9c>] page_cache_async_readahead+0x6c/0x70 [<ffffffff811604c2>] generic_file_read_iter+0x3f2/0x760 [<ffffffff811e0dc7>] __vfs_read+0xa7/0xd0 page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 21:56:21 +00:00
dump_page_owner(page);
}
EXPORT_SYMBOL(dump_page);
#ifdef CONFIG_DEBUG_VM
void dump_vma(const struct vm_area_struct *vma)
{
pr_emerg("vma %px start %px end %px\n"
"next %px prev %px mm %px\n"
"prot %lx anon_vma %px vm_ops %px\n"
"pgoff %lx file %px private_data %px\n"
"flags: %#lx(%pGv)\n",
vma, (void *)vma->vm_start, (void *)vma->vm_end, vma->vm_next,
vma->vm_prev, vma->vm_mm,
(unsigned long)pgprot_val(vma->vm_page_prot),
vma->anon_vma, vma->vm_ops, vma->vm_pgoff,
vma->vm_file, vma->vm_private_data,
vma->vm_flags, &vma->vm_flags);
}
EXPORT_SYMBOL(dump_vma);
void dump_mm(const struct mm_struct *mm)
{
pr_emerg("mm %px mmap %px seqnum %llu task_size %lu\n"
#ifdef CONFIG_MMU
"get_unmapped_area %px\n"
#endif
"mmap_base %lu mmap_legacy_base %lu highest_vm_end %lu\n"
"pgd %px mm_users %d mm_count %d pgtables_bytes %lu map_count %d\n"
"hiwater_rss %lx hiwater_vm %lx total_vm %lx locked_vm %lx\n"
"pinned_vm %llx data_vm %lx exec_vm %lx stack_vm %lx\n"
"start_code %lx end_code %lx start_data %lx end_data %lx\n"
"start_brk %lx brk %lx start_stack %lx\n"
"arg_start %lx arg_end %lx env_start %lx env_end %lx\n"
"binfmt %px flags %lx core_state %px\n"
#ifdef CONFIG_AIO
"ioctx_table %px\n"
#endif
#ifdef CONFIG_MEMCG
"owner %px "
#endif
"exe_file %px\n"
#ifdef CONFIG_MMU_NOTIFIER
"notifier_subscriptions %px\n"
#endif
#ifdef CONFIG_NUMA_BALANCING
"numa_next_scan %lu numa_scan_offset %lu numa_scan_seq %d\n"
#endif
"tlb_flush_pending %d\n"
"def_flags: %#lx(%pGv)\n",
mm, mm->mmap, (long long) mm->vmacache_seqnum, mm->task_size,
#ifdef CONFIG_MMU
mm->get_unmapped_area,
#endif
mm->mmap_base, mm->mmap_legacy_base, mm->highest_vm_end,
mm->pgd, atomic_read(&mm->mm_users),
atomic_read(&mm->mm_count),
mm: consolidate page table accounting Currently, we account page tables separately for each page table level, but that's redundant -- we only make use of total memory allocated to page tables for oom_badness calculation. We also provide the information to userspace, but it has dubious value there too. This patch switches page table accounting to single counter. mm->pgtables_bytes is now used to account all page table levels. We use bytes, because page table size for different levels of page table tree may be different. The change has user-visible effect: we don't have VmPMD and VmPUD reported in /proc/[pid]/status. Not sure if anybody uses them. (As alternative, we can always report 0 kB for them.) OOM-killer report is also slightly changed: we now report pgtables_bytes instead of nr_ptes, nr_pmd, nr_puds. Apart from reducing number of counters per-mm, the benefit is that we now calculate oom_badness() more correctly for machines which have different size of page tables depending on level or where page tables are less than a page in size. The only downside can be debuggability because we do not know which page table level could leak. But I do not remember many bugs that would be caught by separate counters so I wouldn't lose sleep over this. [akpm@linux-foundation.org: fix mm/huge_memory.c] Link: http://lkml.kernel.org/r/20171006100651.44742-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> [kirill.shutemov@linux.intel.com: fix build] Link: http://lkml.kernel.org/r/20171016150113.ikfxy3e7zzfvsr4w@black.fi.intel.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:35:40 +00:00
mm_pgtables_bytes(mm),
mm->map_count,
mm->hiwater_rss, mm->hiwater_vm, mm->total_vm, mm->locked_vm,
mm/debug.c: add a cast to u64 for atomic64_read() atomic64_read() on ppc64le returns "long int", so fix the same way as commit d549f545e690 ("drm/virtio: use %llu format string form atomic64_t") by adding a cast to u64, which makes it work on all arches. In file included from ./include/linux/printk.h:7, from ./include/linux/kernel.h:15, from mm/debug.c:9: mm/debug.c: In function 'dump_mm': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 19 has type 'long int' [-Wformat=] #define KERN_SOH "A" /* ASCII Start Of Header */ ^~~~~~ ./include/linux/kern_levels.h:8:20: note: in expansion of macro 'KERN_SOH' #define KERN_EMERG KERN_SOH "0" /* system is unusable */ ^~~~~~~~ ./include/linux/printk.h:297:9: note: in expansion of macro 'KERN_EMERG' printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~ mm/debug.c:133:2: note: in expansion of macro 'pr_emerg' pr_emerg("mm %px mmap %px seqnum %llu task_size %lu" ^~~~~~~~ mm/debug.c:140:17: note: format string is defined here "pinned_vm %llx data_vm %lx exec_vm %lx stack_vm %lx" ~~~^ %lx Link: http://lkml.kernel.org/r/20190310183051.87303-1-cai@lca.pw Fixes: 70f8a3ca68d3 ("mm: make mm->pinned_vm an atomic64 counter") Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29 03:43:23 +00:00
(u64)atomic64_read(&mm->pinned_vm),
mm->data_vm, mm->exec_vm, mm->stack_vm,
mm->start_code, mm->end_code, mm->start_data, mm->end_data,
mm->start_brk, mm->brk, mm->start_stack,
mm->arg_start, mm->arg_end, mm->env_start, mm->env_end,
mm->binfmt, mm->flags, mm->core_state,
#ifdef CONFIG_AIO
mm->ioctx_table,
#endif
#ifdef CONFIG_MEMCG
mm->owner,
#endif
mm->exe_file,
#ifdef CONFIG_MMU_NOTIFIER
mm->notifier_subscriptions,
#endif
#ifdef CONFIG_NUMA_BALANCING
mm->numa_next_scan, mm->numa_scan_offset, mm->numa_scan_seq,
#endif
mm: migrate: prevent racy access to tlb_flush_pending Patch series "fixes of TLB batching races", v6. It turns out that Linux TLB batching mechanism suffers from various races. Races that are caused due to batching during reclamation were recently handled by Mel and this patch-set deals with others. The more fundamental issue is that concurrent updates of the page-tables allow for TLB flushes to be batched on one core, while another core changes the page-tables. This other core may assume a PTE change does not require a flush based on the updated PTE value, while it is unaware that TLB flushes are still pending. This behavior affects KSM (which may result in memory corruption) and MADV_FREE and MADV_DONTNEED (which may result in incorrect behavior). A proof-of-concept can easily produce the wrong behavior of MADV_DONTNEED. Memory corruption in KSM is harder to produce in practice, but was observed by hacking the kernel and adding a delay before flushing and replacing the KSM page. Finally, there is also one memory barrier missing, which may affect architectures with weak memory model. This patch (of 7): Setting and clearing mm->tlb_flush_pending can be performed by multiple threads, since mmap_sem may only be acquired for read in task_numa_work(). If this happens, tlb_flush_pending might be cleared while one of the threads still changes PTEs and batches TLB flushes. This can lead to the same race between migration and change_protection_range() that led to the introduction of tlb_flush_pending. The result of this race was data corruption, which means that this patch also addresses a theoretically possible data corruption. An actual data corruption was not observed, yet the race was was confirmed by adding assertion to check tlb_flush_pending is not set by two threads, adding artificial latency in change_protection_range() and using sysctl to reduce kernel.numa_balancing_scan_delay_ms. Link: http://lkml.kernel.org/r/20170802000818.4760-2-namit@vmware.com Fixes: 20841405940e ("mm: fix TLB flush race between migration, and change_protection_range") Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-10 22:23:56 +00:00
atomic_read(&mm->tlb_flush_pending),
mm->def_flags, &mm->def_flags
);
}
mm: provide kernel parameter to allow disabling page init poisoning Patch series "Address issues slowing persistent memory initialization", v5. The main thing this patch set achieves is that it allows us to initialize each node worth of persistent memory independently. As a result we reduce page init time by about 2 minutes because instead of taking 30 to 40 seconds per node and going through each node one at a time, we process all 4 nodes in parallel in the case of a 12TB persistent memory setup spread evenly over 4 nodes. This patch (of 3): On systems with a large amount of memory it can take a significant amount of time to initialize all of the page structs with the PAGE_POISON_PATTERN value. I have seen it take over 2 minutes to initialize a system with over 12TB of RAM. In order to work around the issue I had to disable CONFIG_DEBUG_VM and then the boot time returned to something much more reasonable as the arch_add_memory call completed in milliseconds versus seconds. However in doing that I had to disable all of the other VM debugging on the system. In order to work around a kernel that might have CONFIG_DEBUG_VM enabled on a system that has a large amount of memory I have added a new kernel parameter named "vm_debug" that can be set to "-" in order to disable it. Link: http://lkml.kernel.org/r/20180925201921.3576.84239.stgit@localhost.localdomain Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 22:07:45 +00:00
static bool page_init_poisoning __read_mostly = true;
static int __init setup_vm_debug(char *str)
{
bool __page_init_poisoning = true;
/*
* Calling vm_debug with no arguments is equivalent to requesting
* to enable all debugging options we can control.
*/
if (*str++ != '=' || !*str)
goto out;
__page_init_poisoning = false;
if (*str == '-')
goto out;
while (*str) {
switch (tolower(*str)) {
case'p':
__page_init_poisoning = true;
break;
default:
pr_err("vm_debug option '%c' unknown. skipped\n",
*str);
}
str++;
}
out:
if (page_init_poisoning && !__page_init_poisoning)
pr_warn("Page struct poisoning disabled by kernel command line option 'vm_debug'\n");
page_init_poisoning = __page_init_poisoning;
return 1;
}
__setup("vm_debug", setup_vm_debug);
void page_init_poison(struct page *page, size_t size)
{
if (page_init_poisoning)
memset(page, PAGE_POISON_PATTERN, size);
}
EXPORT_SYMBOL_GPL(page_init_poison);
#endif /* CONFIG_DEBUG_VM */