RTC for 6.13

New drivers:
  - Amlogic A4 and A5 RTC
  - Marvell 88PM886 PMIC RTC
  - Renesas RTCA-3 for Renesas RZ/G3S
 
 Drivers:
  - ab-eoz9: fix temperature and alarm support
  - cmos: improve locking behaviour
  - isl12022: add alarm support
  - m48t59: improve epoch handling
  - mt6359: add range
  - rzn1: fix BCD conversions and simplify driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmdKJY4ACgkQY6TcMGxw
 OjJvKhAAmxWzgm5wXTtzNdO/GvmlXehTQ+vdUbhldIGTDKekT2Dr4ijwAI/JOKJt
 CDasXOQw2jEQg1NyxMmcBHtEol6866pUW9+tMFwYi2SxphOfhMbuw7bQNpOPCWUS
 rK3y/sbz0CrHPaGv9RcAxSpzCboXNWCaIGE/JPC/3nhnlSYwW2XZMLxCVTJ1ixAV
 S0Z4CtwCo3E7t6+i1ZY0Lm1AXze9xOuEWF+r9x5TonpetY8z94EcB8xniHfLbrpZ
 1hpwewihyG7pJzvJr7+Q8Ze8P6m/LbohBk7TbzG035ILBSbUu6UHysQCocMgsz8j
 M4yOTTKPwprdc9DrhtykEK4sx+fF1V5tJV+Nl1sljpQco6PNWu+JP6BFrRR8OH0w
 OwmNytgLQux0+rtWjMMuyXYkSKJssTTrpZqpVRud/jf/IVyowQxbCQnTUK8WSm6v
 1cqI4KnVcUFx+kp0BeLJz4a31O8VeMhj+YYqruFhaGdhwMYimXp8X9ZMxZkCVpMa
 OlmtswPvBkN1b/+w72aOXBmrWFYafICZZY7MAViEzVHM0yoIVwEzSfBToT7hvV7h
 w2LFSvHqLIChnUYYEQUlCh7xXhUks7fwbyRG/2n/0G1We7ZsEKIlPXCmhRl0e2R+
 TGgkfUjczJ5z48m0oSy62yj1bmKVvtVdsJ/Ua5192eSxqBCTv78=
 =Q4/G
 -----END PGP SIGNATURE-----

Merge tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "New drivers:
   - Amlogic A4 and A5 RTC
   - Marvell 88PM886 PMIC RTC
   - Renesas RTCA-3 for Renesas RZ/G3S

  Driver updates:
   - ab-eoz9: fix temperature and alarm support
   - cmos: improve locking behaviour
   - isl12022: add alarm support
   - m48t59: improve epoch handling
   - mt6359: add range
   - rzn1: fix BCD conversions and simplify driver"

* tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (38 commits)
  rtc: ab-eoz9: don't fail temperature reads on undervoltage notification
  rtc: rzn1: reduce register access
  rtc: rzn1: drop superfluous wday calculation
  m68k: mvme147, mvme16x: Adopt rtc-m48t59 platform driver
  rtc: brcmstb-waketimer: don't include 'pm_wakeup.h' directly
  rtc: m48t59: Use platform_data struct for year offset value
  rtc: ab-eoz9: fix abeoz9_rtc_read_alarm
  rtc: rv3028: fix RV3028_TS_COUNT type
  rtc: rzn1: update Michel's email
  rtc: rzn1: fix BCD to rtc_time conversion errors
  rtc: amlogic-a4: fix compile error
  rtc: amlogic-a4: drop error messages
  MAINTAINERS: Add an entry for Amlogic RTC driver
  rtc: support for the Amlogic on-chip RTC
  dt-bindings: rtc: Add Amlogic A4 and A5 RTC
  rtc: add driver for Marvell 88PM886 PMIC RTC
  rtc: check if __rtc_read_time was successful in rtc_timer_do_work()
  rtc: pcf8563: Switch to regmap
  rtc: pcf8563: Sort headers alphabetically
  rtc: abx80x: Fix WDT bit position of the status register
  ...

Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml

@@ -30,7 +30,9 @@ properties:
           - const: allwinner,sun50i-a64-rtc
           - const: allwinner,sun8i-h3-rtc
       - items:
-          - const: allwinner,sun20i-d1-rtc
+          - enum:
+              - allwinner,sun20i-d1-rtc
+              - allwinner,sun55i-a523-rtc
           - const: allwinner,sun50i-r329-rtc
 
   reg:

Documentation/devicetree/bindings/rtc/amlogic,a4-rtc.yaml

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/amlogic,a4-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic A4 and A5 RTC
+
+maintainers:
+  - Yiting Deng <yiting.deng@amlogic.com>
+  - Xianwei Zhao <xianwei.zhao@amlogic.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,a4-rtc
+      - amlogic,a5-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RTC clock source, available 24M or 32K crystal
+          oscillator source. when using 24M, need to divide 24M into 32K.
+      - description: RTC module accesses the clock of the apb bus.
+
+  clock-names:
+    items:
+      - const: osc
+      - const: sys
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    apb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rtc@8e600 {
+            compatible = "amlogic,a4-rtc";
+            reg = <0x0 0x8e600 0x0 0x38>;
+            clocks = <&xtal_32k>, <&clkc_periphs 1>;
+            clock-names = "osc", "sys";
+            interrupts = <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>;
+        };
+    };

Documentation/devicetree/bindings/rtc/microchip,mpfs-rtc.yaml

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/rtc/microchip,mfps-rtc.yaml#
+$id: http://devicetree.org/schemas/rtc/microchip,mpfs-rtc.yaml#
 
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
@@ -12,12 +12,14 @@ allOf:
 
 maintainers:
   - Daire McNamara <daire.mcnamara@microchip.com>
-  - Lewis Hanly <lewis.hanly@microchip.com>
 
 properties:
   compatible:
-    enum:
+    oneOf:
-      - microchip,mpfs-rtc
+      - items:
+          - const: microchip,pic64gx-rtc
+          - const: microchip,mpfs-rtc
+      - const: microchip,mpfs-rtc
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/rtc/renesas,rz-rtca3.yaml

@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/renesas,rz-rtca3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RTCA-3 Real Time Clock
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a08g045-rtca3 # RZ/G3S
+      - const: renesas,rz-rtca3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Alarm interrupt
+      - description: Periodic interrupt
+      - description: Carry interrupt
+
+  interrupt-names:
+    items:
+      - const: alarm
+      - const: period
+      - const: carry
+
+  clocks:
+    items:
+      - description: RTC bus clock
+      - description: RTC counter clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: counter
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: VBATTB module reset
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a08g045-cpg.h>
+    #include <dt-bindings/clock/renesas,r9a08g045-vbattb.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rtc@1004ec00 {
+        compatible = "renesas,r9a08g045-rtca3", "renesas,rz-rtca3";
+        reg = <0x1004ec00 0x400>;
+        interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "alarm", "period", "carry";
+        clocks = <&cpg CPG_MOD R9A08G045_VBAT_BCLK>, <&vbattclk VBATTB_VBATTCLK>;
+        clock-names = "bus", "counter";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A08G045_VBAT_BRESETN>;
+    };

MAINTAINERS

@@ -1218,6 +1218,14 @@ F:	Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
 F:	drivers/perf/amlogic/
 F:	include/soc/amlogic/
 
+AMLOGIC RTC DRIVER
+M:	Yiting Deng <yiting.deng@amlogic.com>
+M:	Xianwei Zhao <xianwei.zhao@amlogic.com>
+L:	linux-amlogic@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/rtc/amlogic,a4-rtc.yaml
+F:	drivers/rtc/rtc-amlogic-a4.c
+
 AMPHENOL CHIPCAP 2 HUMIDITY-TEMPERATURE IIO DRIVER
 M:	Javier Carrasco <javier.carrasco.cruz@gmail.com>
 L:	linux-hwmon@vger.kernel.org
@@ -13794,6 +13802,7 @@ F:	Documentation/devicetree/bindings/mfd/marvell,88pm886-a1.yaml
 F:	drivers/input/misc/88pm886-onkey.c
 F:	drivers/mfd/88pm886.c
 F:	drivers/regulator/88pm886-regulator.c
+F:	drivers/rtc/rtc-88pm886.c
 F:	include/linux/mfd/88pm886.h
 
 MARVELL ARMADA 3700 PHY DRIVERS
@@ -19915,6 +19924,14 @@ S:	Supported
 F:	Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
 F:	drivers/counter/rz-mtu3-cnt.c
 
+RENESAS RTCA-3 RTC DRIVER
+M:	Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
+L:	linux-rtc@vger.kernel.org
+L:	linux-renesas-soc@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/rtc/renesas,rz-rtca3.yaml
+F:	drivers/rtc/rtc-renesas-rtca3.c
+
 RENESAS RZ/N1 A5PSW SWITCH DRIVER
 M:	Clément Léger <clement.leger@bootlin.com>
 L:	linux-renesas-soc@vger.kernel.org

arch/m68k/configs/multi_defconfig

@@ -503,6 +503,7 @@ CONFIG_UHID=m
 # CONFIG_USB_SUPPORT is not set
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_NVMEM is not set
+CONFIG_RTC_DRV_M48T59=m
 CONFIG_RTC_DRV_MSM6242=m
 CONFIG_RTC_DRV_RP5C01=m
 CONFIG_RTC_DRV_GENERIC=m

arch/m68k/configs/mvme147_defconfig

@@ -391,6 +391,7 @@ CONFIG_UHID=m
 # CONFIG_USB_SUPPORT is not set
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_NVMEM is not set
+CONFIG_RTC_DRV_M48T59=y
 CONFIG_RTC_DRV_GENERIC=m
 # CONFIG_VIRTIO_MENU is not set
 # CONFIG_VHOST_MENU is not set

arch/m68k/configs/mvme16x_defconfig

@@ -392,6 +392,7 @@ CONFIG_UHID=m
 # CONFIG_USB_SUPPORT is not set
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_NVMEM is not set
+CONFIG_RTC_DRV_M48T59=y
 CONFIG_RTC_DRV_GENERIC=m
 # CONFIG_VIRTIO_MENU is not set
 # CONFIG_VHOST_MENU is not set

arch/m68k/include/asm/mvme147hw.h

@@ -4,24 +4,7 @@
 
 #include <asm/irq.h>
 
-typedef struct {
+#define MVME147_RTC_BASE	0xfffe0000
-	unsigned char
-		ctrl,
-		bcd_sec,
-		bcd_min,
-		bcd_hr,
-		bcd_dow,
-		bcd_dom,
-		bcd_mth,
-		bcd_year;
-} MK48T02;
-
-#define RTC_WRITE	0x80
-#define RTC_READ	0x40
-#define RTC_STOP	0x20
-
-#define m147_rtc ((MK48T02 * volatile)0xfffe07f8)
-
 
 struct pcc_regs {
    volatile u_long	dma_tadr;

arch/m68k/include/asm/mvme16xhw.h

@@ -24,23 +24,7 @@ typedef struct {
 
 #define mvmelp   ((*(volatile MVMElpPtr)(MVME_LPR_BASE)))
 
-typedef struct {
+#define MVME_RTC_BASE	0xfffc0000
-	unsigned char
-		ctrl,
-		bcd_sec,
-		bcd_min,
-		bcd_hr,
-		bcd_dow,
-		bcd_dom,
-		bcd_mth,
-		bcd_year;
-} MK48T08_t, *MK48T08ptr_t;
-
-#define RTC_WRITE	0x80
-#define RTC_READ	0x40
-#define RTC_STOP	0x20
-
-#define MVME_RTC_BASE	0xfffc1ff8
 
 #define MVME_I596_BASE	0xfff46000
 

arch/m68k/mvme147/config.c

@@ -19,8 +19,9 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <linux/major.h>
-#include <linux/rtc.h>
 #include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/rtc/m48t59.h>
 
 #include <asm/bootinfo.h>
 #include <asm/bootinfo-vme.h>
@@ -36,13 +37,9 @@
 
 static void mvme147_get_model(char *model);
 static void __init mvme147_sched_init(void);
-extern int mvme147_hwclk (int, struct rtc_time *);
 extern void mvme147_reset (void);
 
 
-static int bcd2int (unsigned char b);
-
-
 int __init mvme147_parse_bootinfo(const struct bi_record *bi)
 {
 	uint16_t tag = be16_to_cpu(bi->tag);
@@ -80,7 +77,6 @@ void __init config_mvme147(void)
 {
 	mach_sched_init		= mvme147_sched_init;
 	mach_init_IRQ		= mvme147_init_IRQ;
-	mach_hwclk		= mvme147_hwclk;
 	mach_reset		= mvme147_reset;
 	mach_get_model		= mvme147_get_model;
 
@@ -89,6 +85,28 @@ void __init config_mvme147(void)
 		vme_brdtype = VME_TYPE_MVME147;
 }
 
+static struct resource m48t59_rsrc[] = {
+	DEFINE_RES_MEM(MVME147_RTC_BASE, 0x800),
+};
+
+static struct m48t59_plat_data m48t59_data = {
+	.type = M48T59RTC_TYPE_M48T02,
+	.yy_offset = 70,
+};
+
+static int __init mvme147_platform_init(void)
+{
+	if (!MACH_IS_MVME147)
+		return 0;
+
+	platform_device_register_resndata(NULL, "rtc-m48t59", -1,
+					  m48t59_rsrc, ARRAY_SIZE(m48t59_rsrc),
+					  &m48t59_data, sizeof(m48t59_data));
+	return 0;
+}
+
+arch_initcall(mvme147_platform_init);
+
 static u64 mvme147_read_clk(struct clocksource *cs);
 
 static struct clocksource mvme147_clk = {
@@ -162,31 +180,6 @@ static u64 mvme147_read_clk(struct clocksource *cs)
 	return ticks;
 }
 
-static int bcd2int (unsigned char b)
-{
-	return ((b>>4)*10 + (b&15));
-}
-
-int mvme147_hwclk(int op, struct rtc_time *t)
-{
-	if (!op) {
-		m147_rtc->ctrl = RTC_READ;
-		t->tm_year = bcd2int (m147_rtc->bcd_year);
-		t->tm_mon  = bcd2int(m147_rtc->bcd_mth) - 1;
-		t->tm_mday = bcd2int (m147_rtc->bcd_dom);
-		t->tm_hour = bcd2int (m147_rtc->bcd_hr);
-		t->tm_min  = bcd2int (m147_rtc->bcd_min);
-		t->tm_sec  = bcd2int (m147_rtc->bcd_sec);
-		m147_rtc->ctrl = 0;
-		if (t->tm_year < 70)
-			t->tm_year += 100;
-	} else {
-		/* FIXME Setting the time is not yet supported */
-		return -EOPNOTSUPP;
-	}
-	return 0;
-}
-
 static void scc_delay(void)
 {
 	__asm__ __volatile__ ("nop; nop;");

arch/m68k/mvme16x/Makefile

@@ -3,4 +3,4 @@
 # Makefile for Linux arch/m68k/mvme16x source directory
 #
 
-obj-y		:= config.o rtc.o
+obj-y		:= config.o

arch/m68k/mvme16x/config.c

@@ -21,9 +21,10 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <linux/major.h>
-#include <linux/rtc.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc/m48t59.h>
 
 #include <asm/bootinfo.h>
 #include <asm/bootinfo-vme.h>
@@ -39,16 +40,10 @@
 
 extern t_bdid mvme_bdid;
 
-static MK48T08ptr_t volatile rtc = (MK48T08ptr_t)MVME_RTC_BASE;
-
 static void mvme16x_get_model(char *model);
 extern void mvme16x_sched_init(void);
-extern int mvme16x_hwclk (int, struct rtc_time *);
 extern void mvme16x_reset (void);
 
-int bcd2int (unsigned char b);
-
-
 unsigned short mvme16x_config;
 EXPORT_SYMBOL(mvme16x_config);
 
@@ -268,7 +263,6 @@ void __init config_mvme16x(void)
 
     mach_sched_init      = mvme16x_sched_init;
     mach_init_IRQ        = mvme16x_init_IRQ;
-    mach_hwclk           = mvme16x_hwclk;
     mach_reset		 = mvme16x_reset;
     mach_get_model       = mvme16x_get_model;
     mach_get_hardware_list = mvme16x_get_hardware_list;
@@ -312,6 +306,28 @@ void __init config_mvme16x(void)
     }
 }
 
+static struct resource m48t59_rsrc[] = {
+	DEFINE_RES_MEM(MVME_RTC_BASE, 0x2000),
+};
+
+static struct m48t59_plat_data m48t59_data = {
+	.type = M48T59RTC_TYPE_M48T08,
+	.yy_offset = 70,
+};
+
+static int __init mvme16x_platform_init(void)
+{
+	if (!MACH_IS_MVME16x)
+		return 0;
+
+	platform_device_register_resndata(NULL, "rtc-m48t59", -1,
+					  m48t59_rsrc, ARRAY_SIZE(m48t59_rsrc),
+					  &m48t59_data, sizeof(m48t59_data));
+	return 0;
+}
+
+arch_initcall(mvme16x_platform_init);
+
 static irqreturn_t mvme16x_abort_int (int irq, void *dev_id)
 {
 	unsigned long *new = (unsigned long *)vectors;
@@ -426,28 +442,3 @@ static u64 mvme16x_read_clk(struct clocksource *cs)
 
 	return ticks;
 }
-
-int bcd2int (unsigned char b)
-{
-	return ((b>>4)*10 + (b&15));
-}
-
-int mvme16x_hwclk(int op, struct rtc_time *t)
-{
-	if (!op) {
-		rtc->ctrl = RTC_READ;
-		t->tm_year = bcd2int (rtc->bcd_year);
-		t->tm_mon  = bcd2int(rtc->bcd_mth) - 1;
-		t->tm_mday = bcd2int (rtc->bcd_dom);
-		t->tm_hour = bcd2int (rtc->bcd_hr);
-		t->tm_min  = bcd2int (rtc->bcd_min);
-		t->tm_sec  = bcd2int (rtc->bcd_sec);
-		rtc->ctrl = 0;
-		if (t->tm_year < 70)
-			t->tm_year += 100;
-	} else {
-		/* FIXME Setting the time is not yet supported */
-		return -EOPNOTSUPP;
-	}
-	return 0;
-}

arch/m68k/mvme16x/rtc.c

@@ -1,165 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	Real Time Clock interface for Linux on the MVME16x
- *
- * Based on the PC driver by Paul Gortmaker.
- */
-
-#define RTC_VERSION		"1.00"
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/ioport.h>
-#include <linux/capability.h>
-#include <linux/fcntl.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/rtc.h>	/* For struct rtc_time and ioctls, etc */
-#include <linux/bcd.h>
-#include <asm/mvme16xhw.h>
-
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/setup.h>
-
-/*
- *	We sponge a minor off of the misc major. No need slurping
- *	up another valuable major dev number for this. If you add
- *	an ioctl, make sure you don't conflict with SPARC's RTC
- *	ioctls.
- */
-
-static const unsigned char days_in_mo[] =
-{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-
-static atomic_t rtc_ready = ATOMIC_INIT(1);
-
-static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	volatile MK48T08ptr_t rtc = (MK48T08ptr_t)MVME_RTC_BASE;
-	unsigned long flags;
-	struct rtc_time wtime;
-	void __user *argp = (void __user *)arg;
-
-	switch (cmd) {
-	case RTC_RD_TIME:	/* Read the time/date from RTC	*/
-	{
-		local_irq_save(flags);
-		/* Ensure clock and real-time-mode-register are accessible */
-		rtc->ctrl = RTC_READ;
-		memset(&wtime, 0, sizeof(struct rtc_time));
-		wtime.tm_sec =  bcd2bin(rtc->bcd_sec);
-		wtime.tm_min =  bcd2bin(rtc->bcd_min);
-		wtime.tm_hour = bcd2bin(rtc->bcd_hr);
-		wtime.tm_mday =  bcd2bin(rtc->bcd_dom);
-		wtime.tm_mon =  bcd2bin(rtc->bcd_mth)-1;
-		wtime.tm_year = bcd2bin(rtc->bcd_year);
-		if (wtime.tm_year < 70)
-			wtime.tm_year += 100;
-		wtime.tm_wday = bcd2bin(rtc->bcd_dow)-1;
-		rtc->ctrl = 0;
-		local_irq_restore(flags);
-		return copy_to_user(argp, &wtime, sizeof wtime) ?
-								-EFAULT : 0;
-	}
-	case RTC_SET_TIME:	/* Set the RTC */
-	{
-		struct rtc_time rtc_tm;
-		unsigned char mon, day, hrs, min, sec, leap_yr;
-		unsigned int yrs;
-
-		if (!capable(CAP_SYS_ADMIN))
-			return -EACCES;
-
-		if (copy_from_user(&rtc_tm, argp, sizeof(struct rtc_time)))
-			return -EFAULT;
-
-		yrs = rtc_tm.tm_year;
-		if (yrs < 1900)
-			yrs += 1900;
-		mon = rtc_tm.tm_mon + 1;   /* tm_mon starts at zero */
-		day = rtc_tm.tm_mday;
-		hrs = rtc_tm.tm_hour;
-		min = rtc_tm.tm_min;
-		sec = rtc_tm.tm_sec;
-
-		leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
-
-		if ((mon > 12) || (day == 0))
-			return -EINVAL;
-
-		if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
-			return -EINVAL;
-
-		if ((hrs >= 24) || (min >= 60) || (sec >= 60))
-			return -EINVAL;
-
-		if (yrs >= 2070)
-			return -EINVAL;
-
-		local_irq_save(flags);
-		rtc->ctrl     = RTC_WRITE;
-
-		rtc->bcd_sec  = bin2bcd(sec);
-		rtc->bcd_min  = bin2bcd(min);
-		rtc->bcd_hr   = bin2bcd(hrs);
-		rtc->bcd_dom  = bin2bcd(day);
-		rtc->bcd_mth  = bin2bcd(mon);
-		rtc->bcd_year = bin2bcd(yrs%100);
-
-		rtc->ctrl     = 0;
-		local_irq_restore(flags);
-		return 0;
-	}
-	default:
-		return -EINVAL;
-	}
-}
-
-/*
- * We enforce only one user at a time here with the open/close.
- */
-static int rtc_open(struct inode *inode, struct file *file)
-{
-	if( !atomic_dec_and_test(&rtc_ready) )
-	{
-		atomic_inc( &rtc_ready );
-		return -EBUSY;
-	}
-	return 0;
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
-	atomic_inc( &rtc_ready );
-	return 0;
-}
-
-/*
- *	The various file operations we support.
- */
-
-static const struct file_operations rtc_fops = {
-	.unlocked_ioctl	= rtc_ioctl,
-	.open		= rtc_open,
-	.release	= rtc_release,
-	.llseek		= noop_llseek,
-};
-
-static struct miscdevice rtc_dev=
-{
-	.minor =	RTC_MINOR,
-	.name =		"rtc",
-	.fops =		&rtc_fops
-};
-
-static int __init rtc_MK48T08_init(void)
-{
-	if (!MACH_IS_MVME16x)
-		return -ENODEV;
-
-	pr_info("MK48T08 Real Time Clock Driver v%s\n", RTC_VERSION);
-	return misc_register(&rtc_dev);
-}
-device_initcall(rtc_MK48T08_init);

arch/sparc/kernel/time_32.c

@@ -255,6 +255,7 @@ static void mostek_write_byte(struct device *dev, u32 ofs, u8 val)
 static struct m48t59_plat_data m48t59_data = {
 	.read_byte = mostek_read_byte,
 	.write_byte = mostek_write_byte,
+	.yy_offset = 68,
 };
 
 /* resource is set at runtime */

arch/sparc/kernel/time_64.c

@@ -544,6 +544,7 @@ static void mostek_write_byte(struct device *dev, u32 ofs, u8 val)
 static struct m48t59_plat_data m48t59_data = {
 	.read_byte	= mostek_read_byte,
 	.write_byte	= mostek_write_byte,
+	.yy_offset	= 68,
 };
 
 static struct platform_device m48t59_rtc = {

drivers/rtc/Kconfig

@@ -182,6 +182,16 @@ config RTC_DRV_88PM80X
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-88pm80x.
 
+config RTC_DRV_88PM886
+	tristate "Marvell 88PM886 RTC driver"
+	depends on MFD_88PM886_PMIC
+	help
+	  If you say yes here you will get support for the RTC function in the
+	  Marvell 88PM886 chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-88pm886.
+
 config RTC_DRV_ABB5ZES3
 	select REGMAP_I2C
 	tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3"
@@ -496,6 +506,7 @@ config RTC_DRV_PCF85363
 
 config RTC_DRV_PCF8563
 	tristate "Philips PCF8563/Epson RTC8564"
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for the
 	  Philips PCF8563 RTC chip. The Epson RTC8564
@@ -2005,6 +2016,16 @@ config RTC_DRV_MA35D1
 	   This driver can also be built as a module, if so, the module
 	   will be called "rtc-ma35d1".
 
+config RTC_DRV_RENESAS_RTCA3
+	tristate "Renesas RTCA-3 RTC"
+	depends on ARCH_RENESAS
+	help
+	  If you say yes here you get support for the Renesas RTCA-3 RTC
+	  available on the Renesas RZ/G3S SoC.
+
+	  This driver can also be built as a module, if so, the module
+	  will be called "rtc-rtca3".
+
 comment "HID Sensor RTC drivers"
 
 config RTC_DRV_HID_SENSOR_TIME
@@ -2070,4 +2091,16 @@ config RTC_DRV_SSD202D
 	  This driver can also be built as a module, if so, the module
 	  will be called "rtc-ssd20xd".
 
+config RTC_DRV_AMLOGIC_A4
+	tristate "Amlogic RTC"
+	depends on ARCH_MESON || COMPILE_TEST
+	select REGMAP_MMIO
+	default y
+	help
+	  If you say yes here you get support for the RTC block on the
+	  Amlogic A113L2(A4) and A113X2(A5) SoCs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "rtc-amlogic-a4".
+
 endif # RTC_CLASS

drivers/rtc/Makefile

@@ -21,11 +21,13 @@ obj-$(CONFIG_RTC_LIB_KUNIT_TEST)	+= lib_test.o
 
 obj-$(CONFIG_RTC_DRV_88PM80X)	+= rtc-88pm80x.o
 obj-$(CONFIG_RTC_DRV_88PM860X)	+= rtc-88pm860x.o
+obj-$(CONFIG_RTC_DRV_88PM886)	+= rtc-88pm886.o
 obj-$(CONFIG_RTC_DRV_AB8500)	+= rtc-ab8500.o
 obj-$(CONFIG_RTC_DRV_ABB5ZES3)	+= rtc-ab-b5ze-s3.o
 obj-$(CONFIG_RTC_DRV_ABEOZ9)	+= rtc-ab-eoz9.o
 obj-$(CONFIG_RTC_DRV_ABX80X)	+= rtc-abx80x.o
 obj-$(CONFIG_RTC_DRV_AC100)	+= rtc-ac100.o
+obj-$(CONFIG_RTC_DRV_AMLOGIC_A4)	+= rtc-amlogic-a4.o
 obj-$(CONFIG_RTC_DRV_ARMADA38X)	+= rtc-armada38x.o
 obj-$(CONFIG_RTC_DRV_AS3722)	+= rtc-as3722.o
 obj-$(CONFIG_RTC_DRV_ASM9260)	+= rtc-asm9260.o
@@ -158,13 +160,14 @@ obj-$(CONFIG_RTC_DRV_RX8025)	+= rtc-rx8025.o
 obj-$(CONFIG_RTC_DRV_RX8111)	+= rtc-rx8111.o
 obj-$(CONFIG_RTC_DRV_RX8581)	+= rtc-rx8581.o
 obj-$(CONFIG_RTC_DRV_RZN1)	+= rtc-rzn1.o
+obj-$(CONFIG_RTC_DRV_RENESAS_RTCA3)	+= rtc-renesas-rtca3.o
 obj-$(CONFIG_RTC_DRV_S35390A)	+= rtc-s35390a.o
 obj-$(CONFIG_RTC_DRV_S3C)	+= rtc-s3c.o
 obj-$(CONFIG_RTC_DRV_S5M)	+= rtc-s5m.o
 obj-$(CONFIG_RTC_DRV_SA1100)	+= rtc-sa1100.o
 obj-$(CONFIG_RTC_DRV_SC27XX)	+= rtc-sc27xx.o
 obj-$(CONFIG_RTC_DRV_SD2405AL)	+= rtc-sd2405al.o
-obj-$(CONFIG_RTC_DRV_SD3078)   += rtc-sd3078.o
+obj-$(CONFIG_RTC_DRV_SD3078)	+= rtc-sd3078.o
 obj-$(CONFIG_RTC_DRV_SH)	+= rtc-sh.o
 obj-$(CONFIG_RTC_DRV_SNVS)	+= rtc-snvs.o
 obj-$(CONFIG_RTC_DRV_SPEAR)	+= rtc-spear.o

drivers/rtc/interface.c

@@ -904,13 +904,18 @@ void rtc_timer_do_work(struct work_struct *work)
 	struct timerqueue_node *next;
 	ktime_t now;
 	struct rtc_time tm;
+	int err;
 
 	struct rtc_device *rtc =
 		container_of(work, struct rtc_device, irqwork);
 
 	mutex_lock(&rtc->ops_lock);
 again:
-	__rtc_read_time(rtc, &tm);
+	err = __rtc_read_time(rtc, &tm);
+	if (err) {
+		mutex_unlock(&rtc->ops_lock);
+		return;
+	}
 	now = rtc_tm_to_ktime(tm);
 	while ((next = timerqueue_getnext(&rtc->timerqueue))) {
 		if (next->expires > now)

drivers/rtc/rtc-88pm80x.c

@@ -329,7 +329,7 @@ static struct platform_driver pm80x_rtc_driver = {
 		   .pm = &pm80x_rtc_pm_ops,
 		   },
 	.probe = pm80x_rtc_probe,
-	.remove_new = pm80x_rtc_remove,
+	.remove = pm80x_rtc_remove,
 };
 
 module_platform_driver(pm80x_rtc_driver);

drivers/rtc/rtc-88pm860x.c

@@ -371,7 +371,7 @@ static struct platform_driver pm860x_rtc_driver = {
 		.pm	= &pm860x_rtc_pm_ops,
 	},
 	.probe		= pm860x_rtc_probe,
-	.remove_new	= pm860x_rtc_remove,
+	.remove		= pm860x_rtc_remove,
 };
 
 module_platform_driver(pm860x_rtc_driver);

drivers/rtc/rtc-88pm886.c

@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/limits.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+#include <linux/mfd/88pm886.h>
+
+/*
+ * Time is calculated as the sum of a 32-bit read-only advancing counter and a
+ * writeable constant offset stored in the chip's spare registers.
+ */
+
+static int pm886_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct regmap *regmap = dev_get_drvdata(dev);
+	u32 time;
+	u32 buf;
+	int ret;
+
+	ret = regmap_bulk_read(regmap, PM886_REG_RTC_SPARE1, &buf, 4);
+	if (ret)
+		return ret;
+	time = buf;
+
+	ret = regmap_bulk_read(regmap, PM886_REG_RTC_CNT1, &buf, 4);
+	if (ret)
+		return ret;
+	time += buf;
+
+	rtc_time64_to_tm(time, tm);
+
+	return 0;
+}
+
+static int pm886_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct regmap *regmap = dev_get_drvdata(dev);
+	u32 buf;
+	int ret;
+
+	ret = regmap_bulk_read(regmap, PM886_REG_RTC_CNT1, &buf, 4);
+	if (ret)
+		return ret;
+
+	buf = rtc_tm_to_time64(tm) - buf;
+
+	return regmap_bulk_write(regmap, PM886_REG_RTC_SPARE1, &buf, 4);
+}
+
+static const struct rtc_class_ops pm886_rtc_ops = {
+	.read_time = pm886_rtc_read_time,
+	.set_time = pm886_rtc_set_time,
+};
+
+static int pm886_rtc_probe(struct platform_device *pdev)
+{
+	struct pm886_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct rtc_device *rtc;
+	int ret;
+
+	platform_set_drvdata(pdev, chip->regmap);
+
+	rtc = devm_rtc_allocate_device(dev);
+	if (IS_ERR(rtc))
+		return dev_err_probe(dev, PTR_ERR(rtc),
+				"Failed to allocate RTC device\n");
+
+	rtc->ops = &pm886_rtc_ops;
+	rtc->range_max = U32_MAX;
+
+	ret = devm_rtc_register_device(rtc);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to register RTC device\n");
+
+	return 0;
+}
+
+static const struct platform_device_id pm886_rtc_id_table[] = {
+	{ "88pm886-rtc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, pm886_rtc_id_table);
+
+static struct platform_driver pm886_rtc_driver = {
+	.driver = {
+		.name = "88pm886-rtc",
+	},
+	.probe = pm886_rtc_probe,
+	.id_table = pm886_rtc_id_table,
+};
+module_platform_driver(pm886_rtc_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM886 RTC driver");
+MODULE_AUTHOR("Karel Balej <balejk@matfyz.cz>");
+MODULE_LICENSE("GPL");

drivers/rtc/rtc-ab-eoz9.c

@@ -64,7 +64,7 @@
 #define ABEOZ9_BIT_ALARM_MIN		GENMASK(6, 0)
 #define ABEOZ9_REG_ALARM_HOURS		0x12
 #define ABEOZ9_BIT_ALARM_HOURS_PM	BIT(5)
-#define ABEOZ9_BIT_ALARM_HOURS		GENMASK(4, 0)
+#define ABEOZ9_BIT_ALARM_HOURS		GENMASK(5, 0)
 #define ABEOZ9_REG_ALARM_DAYS		0x13
 #define ABEOZ9_BIT_ALARM_DAYS		GENMASK(5, 0)
 #define ABEOZ9_REG_ALARM_WEEKDAYS	0x14
@@ -231,8 +231,6 @@ static int abeoz9_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	alarm->time.tm_sec = bcd2bin(FIELD_GET(ABEOZ9_BIT_ALARM_SEC, regs[0]));
 	alarm->time.tm_min = bcd2bin(FIELD_GET(ABEOZ9_BIT_ALARM_MIN, regs[1]));
 	alarm->time.tm_hour = bcd2bin(FIELD_GET(ABEOZ9_BIT_ALARM_HOURS, regs[2]));
-	if (FIELD_GET(ABEOZ9_BIT_ALARM_HOURS_PM, regs[2]))
-		alarm->time.tm_hour += 12;
 
 	alarm->time.tm_mday = bcd2bin(FIELD_GET(ABEOZ9_BIT_ALARM_DAYS, regs[3]));
 
@@ -396,13 +394,6 @@ static int abeoz9z3_temp_read(struct device *dev,
 	if (ret < 0)
 		return ret;
 
-	if ((val & ABEOZ9_REG_CTRL_STATUS_V1F) ||
-	    (val & ABEOZ9_REG_CTRL_STATUS_V2F)) {
-		dev_err(dev,
-			"thermometer might be disabled due to low voltage\n");
-		return -EINVAL;
-	}
-
 	switch (attr) {
 	case hwmon_temp_input:
 		ret = regmap_read(regmap, ABEOZ9_REG_REG_TEMP, &val);

drivers/rtc/rtc-ab8500.c

@@ -403,7 +403,7 @@ static struct platform_driver ab8500_rtc_driver = {
 		.name = "ab8500-rtc",
 	},
 	.probe	= ab8500_rtc_probe,
-	.remove_new = ab8500_rtc_remove,
+	.remove = ab8500_rtc_remove,
 	.id_table = ab85xx_rtc_ids,
 };
 

drivers/rtc/rtc-abx80x.c

@@ -39,7 +39,7 @@
 #define ABX8XX_REG_STATUS	0x0f
 #define ABX8XX_STATUS_AF	BIT(2)
 #define ABX8XX_STATUS_BLF	BIT(4)
-#define ABX8XX_STATUS_WDT	BIT(6)
+#define ABX8XX_STATUS_WDT	BIT(5)
 
 #define ABX8XX_REG_CTRL1	0x10
 #define ABX8XX_CTRL_WRITE	BIT(0)

drivers/rtc/rtc-ac100.c

@@ -628,7 +628,7 @@ MODULE_DEVICE_TABLE(of, ac100_rtc_match);
 
 static struct platform_driver ac100_rtc_driver = {
 	.probe		= ac100_rtc_probe,
-	.remove_new	= ac100_rtc_remove,
+	.remove		= ac100_rtc_remove,
 	.driver		= {
 		.name		= "ac100-rtc",
 		.of_match_table	= of_match_ptr(ac100_rtc_match),

drivers/rtc/rtc-amlogic-a4.c

@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright (C) 2024 Amlogic, Inc. All rights reserved
+ * Author: Yiting Deng <yiting.deng@amlogic.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/time64.h>
+
+/* rtc oscillator rate */
+#define OSC_32K			32768
+#define OSC_24M			24000000
+
+#define RTC_CTRL		(0x0 << 2)		/* Control RTC */
+#define RTC_ALRM0_EN		BIT(0)
+#define RTC_OSC_SEL		BIT(8)
+#define RTC_ENABLE		BIT(12)
+
+#define RTC_COUNTER_REG		(0x1 << 2)		/* Program RTC counter initial value */
+
+#define RTC_ALARM0_REG		(0x2 << 2)		/* Program RTC alarm0 value */
+
+#define RTC_SEC_ADJUST_REG	(0x6 << 2)		/* Control second-based timing adjustment */
+#define RTC_MATCH_COUNTER	GENMASK(18, 0)
+#define RTC_SEC_ADJUST_CTRL	GENMASK(20, 19)
+#define RTC_ADJ_VALID		BIT(23)
+
+#define RTC_INT_MASK		(0x8 << 2)		/* RTC interrupt mask */
+#define RTC_ALRM0_IRQ_MSK	BIT(0)
+
+#define RTC_INT_CLR		(0x9 << 2)		/* Clear RTC interrupt */
+#define RTC_ALRM0_IRQ_CLR	BIT(0)
+
+#define RTC_OSCIN_CTRL0		(0xa << 2)		/* Control RTC clk from 24M */
+#define RTC_OSCIN_CTRL1		(0xb << 2)		/* Control RTC clk from 24M */
+#define RTC_OSCIN_IN_EN		BIT(31)
+#define RTC_OSCIN_OUT_CFG	GENMASK(29, 28)
+#define RTC_OSCIN_OUT_N0M0	GENMASK(11, 0)
+#define RTC_OSCIN_OUT_N1M1	GENMASK(23, 12)
+
+#define RTC_INT_STATUS		(0xc << 2)		/* RTC interrupt status */
+#define RTC_ALRM0_IRQ_STATUS	BIT(0)
+
+#define RTC_REAL_TIME		(0xd << 2)		/* RTC time value */
+
+#define RTC_OSCIN_OUT_32K_N0	0x2dc
+#define RTC_OSCIN_OUT_32K_N1	0x2db
+#define RTC_OSCIN_OUT_32K_M0	0x1
+#define RTC_OSCIN_OUT_32K_M1	0x2
+
+#define RTC_SWALLOW_SECOND	0x2
+#define RTC_INSERT_SECOND	0x3
+
+struct aml_rtc_config {
+	bool gray_stored;
+};
+
+struct aml_rtc_data {
+	struct regmap *map;
+	struct rtc_device *rtc_dev;
+	int irq;
+	struct clk *rtc_clk;
+	struct clk *sys_clk;
+	int rtc_enabled;
+	const struct aml_rtc_config *config;
+};
+
+static const struct regmap_config aml_rtc_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = RTC_REAL_TIME,
+};
+
+static inline u32 gray_to_binary(u32 gray)
+{
+	u32 bcd = gray;
+	int size = sizeof(bcd) * 8;
+	int i;
+
+	for (i = 0; (1 << i) < size; i++)
+		bcd ^= bcd >> (1 << i);
+
+	return bcd;
+}
+
+static inline u32 binary_to_gray(u32 bcd)
+{
+	return bcd ^ (bcd >> 1);
+}
+
+static int aml_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct aml_rtc_data *rtc = dev_get_drvdata(dev);
+	u32 time_sec;
+
+	/* if RTC disabled, read time failed */
+	if (!rtc->rtc_enabled)
+		return -EINVAL;
+
+	regmap_read(rtc->map, RTC_REAL_TIME, &time_sec);
+	if (rtc->config->gray_stored)
+		time_sec = gray_to_binary(time_sec);
+	rtc_time64_to_tm(time_sec, tm);
+	dev_dbg(dev, "%s: read time = %us\n", __func__, time_sec);
+
+	return 0;
+}
+
+static int aml_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct aml_rtc_data *rtc = dev_get_drvdata(dev);
+	u32 time_sec;
+
+	/* if RTC disabled, first enable it */
+	if (!rtc->rtc_enabled) {
+		regmap_write_bits(rtc->map, RTC_CTRL, RTC_ENABLE, RTC_ENABLE);
+		usleep_range(100, 200);
+		rtc->rtc_enabled = regmap_test_bits(rtc->map, RTC_CTRL, RTC_ENABLE);
+		if (!rtc->rtc_enabled)
+			return -EINVAL;
+	}
+
+	time_sec = rtc_tm_to_time64(tm);
+	if (rtc->config->gray_stored)
+		time_sec = binary_to_gray(time_sec);
+	regmap_write(rtc->map, RTC_COUNTER_REG, time_sec);
+	dev_dbg(dev, "%s: set time = %us\n", __func__, time_sec);
+
+	return 0;
+}
+
+static int aml_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct aml_rtc_data *rtc = dev_get_drvdata(dev);
+	time64_t alarm_sec;
+
+	/* if RTC disabled, set alarm failed */
+	if (!rtc->rtc_enabled)
+		return -EINVAL;
+
+	regmap_update_bits(rtc->map, RTC_CTRL,
+			   RTC_ALRM0_EN, RTC_ALRM0_EN);
+	regmap_update_bits(rtc->map, RTC_INT_MASK,
+			   RTC_ALRM0_IRQ_MSK, 0);
+
+	alarm_sec = rtc_tm_to_time64(&alarm->time);
+	if (rtc->config->gray_stored)
+		alarm_sec = binary_to_gray(alarm_sec);
+	regmap_write(rtc->map, RTC_ALARM0_REG, alarm_sec);
+
+	dev_dbg(dev, "%s: alarm->enabled=%d alarm_set=%llds\n", __func__,
+		alarm->enabled, alarm_sec);
+
+	return 0;
+}
+
+static int aml_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct aml_rtc_data *rtc = dev_get_drvdata(dev);
+	u32 alarm_sec;
+	int alarm_enable;
+	int alarm_mask;
+
+	/* if RTC disabled, read alarm failed */
+	if (!rtc->rtc_enabled)
+		return -EINVAL;
+
+	regmap_read(rtc->map, RTC_ALARM0_REG, &alarm_sec);
+	if (rtc->config->gray_stored)
+		alarm_sec = gray_to_binary(alarm_sec);
+	rtc_time64_to_tm(alarm_sec, &alarm->time);
+
+	alarm_enable = regmap_test_bits(rtc->map, RTC_CTRL, RTC_ALRM0_EN);
+	alarm_mask = regmap_test_bits(rtc->map, RTC_INT_MASK, RTC_ALRM0_IRQ_MSK);
+	alarm->enabled = (alarm_enable && !alarm_mask) ? 1 : 0;
+	dev_dbg(dev, "%s: alarm->enabled=%d alarm=%us\n", __func__,
+		alarm->enabled, alarm_sec);
+
+	return 0;
+}
+
+static int aml_rtc_read_offset(struct device *dev, long *offset)
+{
+	struct aml_rtc_data *rtc = dev_get_drvdata(dev);
+	u32 reg_val;
+	long val;
+	int sign, match_counter, enable;
+
+	/* if RTC disabled, read offset failed */
+	if (!rtc->rtc_enabled)
+		return -EINVAL;
+
+	regmap_read(rtc->map, RTC_SEC_ADJUST_REG, &reg_val);
+	enable = FIELD_GET(RTC_ADJ_VALID, reg_val);
+	if (!enable) {
+		val = 0;
+	} else {
+		sign = FIELD_GET(RTC_SEC_ADJUST_CTRL, reg_val);
+		match_counter = FIELD_GET(RTC_MATCH_COUNTER, reg_val);
+		val = 1000000000 / (match_counter + 1);
+		if (sign == RTC_SWALLOW_SECOND)
+			val = -val;
+	}
+	*offset = val;
+
+	return 0;
+}
+
+static int aml_rtc_set_offset(struct device *dev, long offset)
+{
+	struct aml_rtc_data *rtc = dev_get_drvdata(dev);
+	int sign = 0;
+	int match_counter = 0;
+	int enable = 0;
+	u32 reg_val;
+
+	/* if RTC disabled, set offset failed */
+	if (!rtc->rtc_enabled)
+		return -EINVAL;
+
+	if (offset) {
+		enable = 1;
+		sign = offset < 0 ? RTC_SWALLOW_SECOND : RTC_INSERT_SECOND;
+		match_counter = 1000000000 / abs(offset) - 1;
+		if (match_counter < 0 || match_counter > RTC_MATCH_COUNTER)
+			return -EINVAL;
+	}
+
+	reg_val = FIELD_PREP(RTC_ADJ_VALID, enable) |
+		  FIELD_PREP(RTC_SEC_ADJUST_CTRL, sign) |
+		  FIELD_PREP(RTC_MATCH_COUNTER, match_counter);
+	regmap_write(rtc->map, RTC_SEC_ADJUST_REG, reg_val);
+
+	return 0;
+}
+
+static int aml_rtc_alarm_enable(struct device *dev, unsigned int enabled)
+{
+	struct aml_rtc_data *rtc = dev_get_drvdata(dev);
+
+	if (enabled) {
+		regmap_update_bits(rtc->map, RTC_CTRL,
+				   RTC_ALRM0_EN, RTC_ALRM0_EN);
+		regmap_update_bits(rtc->map, RTC_INT_MASK,
+				   RTC_ALRM0_IRQ_MSK, 0);
+	} else {
+		regmap_update_bits(rtc->map, RTC_INT_MASK,
+				   RTC_ALRM0_IRQ_MSK, RTC_ALRM0_IRQ_MSK);
+		regmap_update_bits(rtc->map, RTC_CTRL,
+				   RTC_ALRM0_EN, 0);
+	}
+
+	return 0;
+}
+
+static const struct rtc_class_ops aml_rtc_ops = {
+	.read_time = aml_rtc_read_time,
+	.set_time = aml_rtc_set_time,
+	.read_alarm = aml_rtc_read_alarm,
+	.set_alarm = aml_rtc_set_alarm,
+	.alarm_irq_enable = aml_rtc_alarm_enable,
+	.read_offset = aml_rtc_read_offset,
+	.set_offset = aml_rtc_set_offset,
+};
+
+static irqreturn_t aml_rtc_handler(int irq, void *data)
+{
+	struct aml_rtc_data *rtc = (struct aml_rtc_data *)data;
+
+	regmap_write(rtc->map, RTC_ALARM0_REG, 0);
+	regmap_write(rtc->map, RTC_INT_CLR, RTC_ALRM0_IRQ_STATUS);
+
+	rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
+
+	return IRQ_HANDLED;
+}
+
+static void aml_rtc_init(struct aml_rtc_data *rtc)
+{
+	u32 reg_val = 0;
+
+	rtc->rtc_enabled = regmap_test_bits(rtc->map, RTC_CTRL, RTC_ENABLE);
+	if (!rtc->rtc_enabled) {
+		if (clk_get_rate(rtc->rtc_clk) == OSC_24M) {
+			/* select 24M oscillator */
+			regmap_write_bits(rtc->map, RTC_CTRL, RTC_OSC_SEL, RTC_OSC_SEL);
+
+			/*
+			 * Set RTC oscillator to freq_out to freq_in/((N0*M0+N1*M1)/(M0+M1))
+			 * Enable clock_in gate of oscillator 24MHz
+			 * Set N0 to 733, N1 to 732
+			 */
+			reg_val = FIELD_PREP(RTC_OSCIN_IN_EN, 1)
+				  | FIELD_PREP(RTC_OSCIN_OUT_CFG, 1)
+				  | FIELD_PREP(RTC_OSCIN_OUT_N0M0, RTC_OSCIN_OUT_32K_N0)
+				  | FIELD_PREP(RTC_OSCIN_OUT_N1M1, RTC_OSCIN_OUT_32K_N1);
+			regmap_write_bits(rtc->map, RTC_OSCIN_CTRL0, RTC_OSCIN_IN_EN
+					  | RTC_OSCIN_OUT_CFG | RTC_OSCIN_OUT_N0M0
+					  | RTC_OSCIN_OUT_N1M1, reg_val);
+
+			/* Set M0 to 2, M1 to 3, so freq_out = 32768 Hz*/
+			reg_val = FIELD_PREP(RTC_OSCIN_OUT_N0M0, RTC_OSCIN_OUT_32K_M0)
+				  | FIELD_PREP(RTC_OSCIN_OUT_N1M1, RTC_OSCIN_OUT_32K_M1);
+			regmap_write_bits(rtc->map, RTC_OSCIN_CTRL1, RTC_OSCIN_OUT_N0M0
+					  | RTC_OSCIN_OUT_N1M1, reg_val);
+		} else {
+			/* select 32K oscillator */
+			regmap_write_bits(rtc->map, RTC_CTRL, RTC_OSC_SEL, 0);
+		}
+	}
+	regmap_write_bits(rtc->map, RTC_INT_MASK,
+			  RTC_ALRM0_IRQ_MSK, RTC_ALRM0_IRQ_MSK);
+	regmap_write_bits(rtc->map, RTC_CTRL, RTC_ALRM0_EN, 0);
+}
+
+static int aml_rtc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct aml_rtc_data *rtc;
+	void __iomem *base;
+	int ret = 0;
+
+	rtc = devm_kzalloc(dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->config = of_device_get_match_data(dev);
+	if (!rtc->config)
+		return -ENODEV;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return dev_err_probe(dev, PTR_ERR(base), "resource ioremap failed\n");
+
+	rtc->map = devm_regmap_init_mmio(dev, base, &aml_rtc_regmap_config);
+	if (IS_ERR(rtc->map))
+		return dev_err_probe(dev, PTR_ERR(rtc->map), "regmap init failed\n");
+
+	rtc->irq = platform_get_irq(pdev, 0);
+	if (rtc->irq < 0)
+		return rtc->irq;
+
+	rtc->rtc_clk = devm_clk_get(dev, "osc");
+	if (IS_ERR(rtc->rtc_clk))
+		return dev_err_probe(dev, PTR_ERR(rtc->rtc_clk),
+				     "failed to find rtc clock\n");
+	if (clk_get_rate(rtc->rtc_clk) != OSC_32K && clk_get_rate(rtc->rtc_clk) != OSC_24M)
+		return dev_err_probe(dev, -EINVAL, "Invalid clock configuration\n");
+
+	rtc->sys_clk = devm_clk_get_enabled(dev, "sys");
+	if (IS_ERR(rtc->sys_clk))
+		return dev_err_probe(dev, PTR_ERR(rtc->sys_clk),
+				     "failed to get_enable rtc sys clk\n");
+	aml_rtc_init(rtc);
+
+	device_init_wakeup(dev, 1);
+	platform_set_drvdata(pdev, rtc);
+
+	rtc->rtc_dev = devm_rtc_allocate_device(dev);
+	if (IS_ERR(rtc->rtc_dev)) {
+		ret = PTR_ERR(rtc->rtc_dev);
+		goto err_clk;
+	}
+
+	ret = devm_request_irq(dev, rtc->irq, aml_rtc_handler,
+			       IRQF_ONESHOT, "aml-rtc alarm", rtc);
+	if (ret) {
+		dev_err_probe(dev, ret, "IRQ%d request failed, ret = %d\n",
+			      rtc->irq, ret);
+		goto err_clk;
+	}
+
+	rtc->rtc_dev->ops = &aml_rtc_ops;
+	rtc->rtc_dev->range_min = 0;
+	rtc->rtc_dev->range_max = U32_MAX;
+
+	ret = devm_rtc_register_device(rtc->rtc_dev);
+	if (ret) {
+		dev_err_probe(&pdev->dev, ret, "Failed to register RTC device: %d\n", ret);
+		goto err_clk;
+	}
+
+	return 0;
+err_clk:
+	clk_disable_unprepare(rtc->sys_clk);
+	device_init_wakeup(dev, 0);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int aml_rtc_suspend(struct device *dev)
+{
+	struct aml_rtc_data *rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(rtc->irq);
+
+	return 0;
+}
+
+static int aml_rtc_resume(struct device *dev)
+{
+	struct aml_rtc_data *rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(rtc->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(aml_rtc_pm_ops,
+			 aml_rtc_suspend, aml_rtc_resume);
+
+static void aml_rtc_remove(struct platform_device *pdev)
+{
+	struct aml_rtc_data *rtc = dev_get_drvdata(&pdev->dev);
+
+	clk_disable_unprepare(rtc->sys_clk);
+	device_init_wakeup(&pdev->dev, 0);
+}
+
+static const struct aml_rtc_config a5_rtc_config = {
+};
+
+static const struct aml_rtc_config a4_rtc_config = {
+	.gray_stored = true,
+};
+
+static const struct of_device_id aml_rtc_device_id[] = {
+	{
+		.compatible = "amlogic,a4-rtc",
+		.data = &a4_rtc_config,
+	},
+	{
+		.compatible = "amlogic,a5-rtc",
+		.data = &a5_rtc_config,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, aml_rtc_device_id);
+
+static struct platform_driver aml_rtc_driver = {
+	.probe = aml_rtc_probe,
+	.remove = aml_rtc_remove,
+	.driver = {
+		.name = "aml-rtc",
+		.pm = &aml_rtc_pm_ops,
+		.of_match_table = aml_rtc_device_id,
+	},
+};
+
+module_platform_driver(aml_rtc_driver);
+MODULE_DESCRIPTION("Amlogic RTC driver");
+MODULE_AUTHOR("Yiting Deng <yiting.deng@amlogic.com>");
+MODULE_LICENSE("GPL");

drivers/rtc/rtc-asm9260.c

@@ -325,7 +325,7 @@ MODULE_DEVICE_TABLE(of, asm9260_dt_ids);
 
 static struct platform_driver asm9260_rtc_driver = {
 	.probe		= asm9260_rtc_probe,
-	.remove_new	= asm9260_rtc_remove,
+	.remove		= asm9260_rtc_remove,
 	.driver		= {
 		.name	= "asm9260-rtc",
 		.of_match_table = asm9260_dt_ids,

drivers/rtc/rtc-at91rm9200.c

@@ -640,7 +640,7 @@ static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume);
  * triggering a section mismatch warning.
  */
 static struct platform_driver at91_rtc_driver __refdata = {
-	.remove_new	= __exit_p(at91_rtc_remove),
+	.remove		= __exit_p(at91_rtc_remove),
 	.shutdown	= at91_rtc_shutdown,
 	.driver		= {
 		.name	= "at91_rtc",

drivers/rtc/rtc-at91sam9.c

@@ -530,7 +530,7 @@ MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids);
 
 static struct platform_driver at91_rtc_driver = {
 	.probe		= at91_rtc_probe,
-	.remove_new	= at91_rtc_remove,
+	.remove		= at91_rtc_remove,
 	.shutdown	= at91_rtc_shutdown,
 	.driver		= {
 		.name	= "rtc-at91sam9",

drivers/rtc/rtc-brcmstb-waketimer.c

@@ -17,7 +17,6 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
-#include <linux/pm_wakeup.h>
 #include <linux/reboot.h>
 #include <linux/rtc.h>
 #include <linux/stat.h>
@@ -417,7 +416,7 @@ static const __maybe_unused struct of_device_id brcmstb_waketmr_of_match[] = {
 
 static struct platform_driver brcmstb_waketmr_driver = {
 	.probe			= brcmstb_waketmr_probe,
-	.remove_new		= brcmstb_waketmr_remove,
+	.remove			= brcmstb_waketmr_remove,
 	.driver = {
 		.name		= "brcmstb-waketimer",
 		.pm		= &brcmstb_waketmr_pm_ops,

drivers/rtc/rtc-cadence.c

@@ -402,7 +402,7 @@ static struct platform_driver cdns_rtc_driver = {
 		.pm = &cdns_rtc_pm_ops,
 	},
 	.probe = cdns_rtc_probe,
-	.remove_new = cdns_rtc_remove,
+	.remove = cdns_rtc_remove,
 };
 module_platform_driver(cdns_rtc_driver);
 

drivers/rtc/rtc-cmos.c

@@ -645,18 +645,17 @@ static int cmos_nvram_read(void *priv, unsigned int off, void *val,
 	unsigned char *buf = val;
 
 	off += NVRAM_OFFSET;
-	spin_lock_irq(&rtc_lock);
+	for (; count; count--, off++, buf++) {
-	for (; count; count--, off++) {
+		guard(spinlock_irq)(&rtc_lock);
 		if (off < 128)
-			*buf++ = CMOS_READ(off);
+			*buf = CMOS_READ(off);
 		else if (can_bank2)
-			*buf++ = cmos_read_bank2(off);
+			*buf = cmos_read_bank2(off);
 		else
-			break;
+			return -EIO;
 	}
-	spin_unlock_irq(&rtc_lock);
 
-	return count ? -EIO : 0;
+	return 0;
 }
 
 static int cmos_nvram_write(void *priv, unsigned int off, void *val,
@@ -671,23 +670,23 @@ static int cmos_nvram_write(void *priv, unsigned int off, void *val,
 	 * NVRAM to update, updating checksums is also part of its job.
 	 */
 	off += NVRAM_OFFSET;
-	spin_lock_irq(&rtc_lock);
+	for (; count; count--, off++, buf++) {
-	for (; count; count--, off++) {
 		/* don't trash RTC registers */
 		if (off == cmos->day_alrm
 				|| off == cmos->mon_alrm
 				|| off == cmos->century)
-			buf++;
+			continue;
-		else if (off < 128)
-			CMOS_WRITE(*buf++, off);
-		else if (can_bank2)
-			cmos_write_bank2(*buf++, off);
-		else
-			break;
-	}
-	spin_unlock_irq(&rtc_lock);
 
-	return count ? -EIO : 0;
+		guard(spinlock_irq)(&rtc_lock);
+		if (off < 128)
+			CMOS_WRITE(*buf, off);
+		else if (can_bank2)
+			cmos_write_bank2(*buf, off);
+		else
+			return -EIO;
+	}
+
+	return 0;
 }
 
 /*----------------------------------------------------------------*/
@@ -1528,7 +1527,7 @@ static void cmos_platform_shutdown(struct platform_device *pdev)
 MODULE_ALIAS("platform:rtc_cmos");
 
 static struct platform_driver cmos_platform_driver = {
-	.remove_new	= cmos_platform_remove,
+	.remove		= cmos_platform_remove,
 	.shutdown	= cmos_platform_shutdown,
 	.driver = {
 		.name		= driver_name,

drivers/rtc/rtc-cros-ec.c

@@ -401,7 +401,7 @@ MODULE_DEVICE_TABLE(platform, cros_ec_rtc_id);
 
 static struct platform_driver cros_ec_rtc_driver = {
 	.probe = cros_ec_rtc_probe,
-	.remove_new = cros_ec_rtc_remove,
+	.remove = cros_ec_rtc_remove,
 	.driver = {
 		.name = DRV_NAME,
 		.pm = &cros_ec_rtc_pm_ops,

drivers/rtc/rtc-ds1685.c

@@ -1354,7 +1354,7 @@ static struct platform_driver ds1685_rtc_driver = {
 		.name	= "rtc-ds1685",
 	},
 	.probe		= ds1685_rtc_probe,
-	.remove_new	= ds1685_rtc_remove,
+	.remove		= ds1685_rtc_remove,
 };
 module_platform_driver(ds1685_rtc_driver);
 /* ----------------------------------------------------------------------- */

drivers/rtc/rtc-ftrtc010.c

@@ -214,7 +214,7 @@ static struct platform_driver ftrtc010_rtc_driver = {
 		.of_match_table = ftrtc010_rtc_dt_match,
 	},
 	.probe		= ftrtc010_rtc_probe,
-	.remove_new	= ftrtc010_rtc_remove,
+	.remove		= ftrtc010_rtc_remove,
 };
 
 module_platform_driver_probe(ftrtc010_rtc_driver, ftrtc010_rtc_probe);

drivers/rtc/rtc-hid-sensor-time.c

@@ -319,7 +319,7 @@ static struct platform_driver hid_time_platform_driver = {
 		.name	= KBUILD_MODNAME,
 	},
 	.probe		= hid_time_probe,
-	.remove_new	= hid_time_remove,
+	.remove		= hid_time_remove,
 };
 module_platform_driver(hid_time_platform_driver);
 

drivers/rtc/rtc-imxdi.c

@@ -860,7 +860,7 @@ static struct platform_driver dryice_rtc_driver __refdata = {
 		   .name = "imxdi_rtc",
 		   .of_match_table = dryice_dt_ids,
 		   },
-	.remove_new = __exit_p(dryice_rtc_remove),
+	.remove = __exit_p(dryice_rtc_remove),
 };
 
 module_platform_driver_probe(dryice_rtc_driver, dryice_rtc_probe);

drivers/rtc/rtc-isl12022.c

@@ -21,7 +21,7 @@
 
 #include <asm/byteorder.h>
 
-/* ISL register offsets */
+/* RTC - Real time clock registers */
 #define ISL12022_REG_SC		0x00
 #define ISL12022_REG_MN		0x01
 #define ISL12022_REG_HR		0x02
@@ -30,21 +30,36 @@
 #define ISL12022_REG_YR		0x05
 #define ISL12022_REG_DW		0x06
 
+/* CSR - Control and status registers */
 #define ISL12022_REG_SR		0x07
 #define ISL12022_REG_INT	0x08
-
 #define ISL12022_REG_PWR_VBAT	0x0a
-
 #define ISL12022_REG_BETA	0x0d
+
+/* ALARM - Alarm registers */
+#define ISL12022_REG_SCA0	0x10
+#define ISL12022_REG_MNA0	0x11
+#define ISL12022_REG_HRA0	0x12
+#define ISL12022_REG_DTA0	0x13
+#define ISL12022_REG_MOA0	0x14
+#define ISL12022_REG_DWA0	0x15
+#define ISL12022_ALARM		ISL12022_REG_SCA0
+#define ISL12022_ALARM_LEN	(ISL12022_REG_DWA0 - ISL12022_REG_SCA0 + 1)
+
+/* TEMP - Temperature sensor registers */
 #define ISL12022_REG_TEMP_L	0x28
 
 /* ISL register bits */
 #define ISL12022_HR_MIL		(1 << 7)	/* military or 24 hour time */
 
+#define ISL12022_SR_ALM		(1 << 4)
 #define ISL12022_SR_LBAT85	(1 << 2)
 #define ISL12022_SR_LBAT75	(1 << 1)
 
+#define ISL12022_INT_ARST	(1 << 7)
 #define ISL12022_INT_WRTC	(1 << 6)
+#define ISL12022_INT_IM		(1 << 5)
+#define ISL12022_INT_FOBATB	(1 << 4)
 #define ISL12022_INT_FO_MASK	GENMASK(3, 0)
 #define ISL12022_INT_FO_OFF	0x0
 #define ISL12022_INT_FO_32K	0x1
@@ -52,8 +67,19 @@
 #define ISL12022_REG_VB85_MASK	GENMASK(5, 3)
 #define ISL12022_REG_VB75_MASK	GENMASK(2, 0)
 
+#define ISL12022_ALARM_ENABLE	(1 << 7)	/* for all ALARM registers  */
+
 #define ISL12022_BETA_TSE	(1 << 7)
 
+static struct i2c_driver isl12022_driver;
+
+struct isl12022 {
+	struct rtc_device *rtc;
+	struct regmap *regmap;
+	int irq;
+	bool irq_enabled;
+};
+
 static umode_t isl12022_hwmon_is_visible(const void *data,
 					 enum hwmon_sensor_types type,
 					 u32 attr, int channel)
@@ -116,7 +142,8 @@ static const struct hwmon_chip_info isl12022_hwmon_chip_info = {
 
 static void isl12022_hwmon_register(struct device *dev)
 {
-	struct regmap *regmap = dev_get_drvdata(dev);
+	struct isl12022 *isl12022 = dev_get_drvdata(dev);
+	struct regmap *regmap = isl12022->regmap;
 	struct device *hwmon;
 	int ret;
 
@@ -143,8 +170,9 @@ static void isl12022_hwmon_register(struct device *dev)
  */
 static int isl12022_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	struct regmap *regmap = dev_get_drvdata(dev);
+	struct isl12022 *isl12022 = dev_get_drvdata(dev);
-	uint8_t buf[ISL12022_REG_INT + 1];
+	struct regmap *regmap = isl12022->regmap;
+	u8 buf[ISL12022_REG_INT + 1];
 	int ret;
 
 	ret = regmap_bulk_read(regmap, ISL12022_REG_SC, buf, sizeof(buf));
@@ -178,9 +206,10 @@ static int isl12022_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 static int isl12022_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
-	struct regmap *regmap = dev_get_drvdata(dev);
+	struct isl12022 *isl12022 = dev_get_drvdata(dev);
+	struct regmap *regmap = isl12022->regmap;
 	int ret;
-	uint8_t buf[ISL12022_REG_DW + 1];
+	u8 buf[ISL12022_REG_DW + 1];
 
 	dev_dbg(dev, "%s: %ptR\n", __func__, tm);
 
@@ -208,9 +237,198 @@ static int isl12022_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	return regmap_bulk_write(regmap, ISL12022_REG_SC, buf, sizeof(buf));
 }
 
+static int isl12022_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct rtc_time *tm = &alarm->time;
+	struct isl12022 *isl12022 = dev_get_drvdata(dev);
+	struct regmap *regmap = isl12022->regmap;
+	u8 buf[ISL12022_ALARM_LEN];
+	unsigned int i, yr;
+	int ret;
+
+	ret = regmap_bulk_read(regmap, ISL12022_ALARM, buf, sizeof(buf));
+	if (ret) {
+		dev_dbg(dev, "%s: reading ALARM registers failed\n",
+			__func__);
+		return ret;
+	}
+
+	/* The alarm doesn't store the year so get it from the rtc section */
+	ret = regmap_read(regmap, ISL12022_REG_YR, &yr);
+	if (ret) {
+		dev_dbg(dev, "%s: reading YR register failed\n", __func__);
+		return ret;
+	}
+
+	dev_dbg(dev,
+		"%s: sc=%02x, mn=%02x, hr=%02x, dt=%02x, mo=%02x, dw=%02x yr=%u\n",
+		__func__, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], yr);
+
+	tm->tm_sec  = bcd2bin(buf[ISL12022_REG_SCA0 - ISL12022_ALARM] & 0x7F);
+	tm->tm_min  = bcd2bin(buf[ISL12022_REG_MNA0 - ISL12022_ALARM] & 0x7F);
+	tm->tm_hour = bcd2bin(buf[ISL12022_REG_HRA0 - ISL12022_ALARM] & 0x3F);
+	tm->tm_mday = bcd2bin(buf[ISL12022_REG_DTA0 - ISL12022_ALARM] & 0x3F);
+	tm->tm_mon  = bcd2bin(buf[ISL12022_REG_MOA0 - ISL12022_ALARM] & 0x1F) - 1;
+	tm->tm_wday = buf[ISL12022_REG_DWA0 - ISL12022_ALARM]         & 0x07;
+	tm->tm_year = bcd2bin(yr) + 100;
+
+	for (i = 0; i < ISL12022_ALARM_LEN; i++) {
+		if (buf[i] & ISL12022_ALARM_ENABLE) {
+			alarm->enabled = 1;
+			break;
+		}
+	}
+
+	dev_dbg(dev, "%s: %ptR\n", __func__, tm);
+
+	return 0;
+}
+
+static int isl12022_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct rtc_time *alarm_tm = &alarm->time;
+	struct isl12022 *isl12022 = dev_get_drvdata(dev);
+	struct regmap *regmap = isl12022->regmap;
+	u8 regs[ISL12022_ALARM_LEN] = { 0, };
+	struct rtc_time rtc_tm;
+	int ret, enable, dw;
+
+	ret = isl12022_rtc_read_time(dev, &rtc_tm);
+	if (ret)
+		return ret;
+
+	/* If the alarm time is before the current time disable the alarm */
+	if (!alarm->enabled || rtc_tm_sub(alarm_tm, &rtc_tm) <= 0)
+		enable = 0;
+	else
+		enable = ISL12022_ALARM_ENABLE;
+
+	/*
+	 * Set non-matching day of the week to safeguard against early false
+	 * matching while setting all the alarm registers (this rtc lacks a
+	 * general alarm/irq enable/disable bit).
+	 */
+	ret = regmap_read(regmap, ISL12022_REG_DW, &dw);
+	if (ret) {
+		dev_dbg(dev, "%s: reading DW failed\n", __func__);
+		return ret;
+	}
+	/* ~4 days into the future should be enough to avoid match */
+	dw = ((dw + 4) % 7) | ISL12022_ALARM_ENABLE;
+	ret = regmap_write(regmap, ISL12022_REG_DWA0, dw);
+	if (ret) {
+		dev_dbg(dev, "%s: writing DWA0 failed\n", __func__);
+		return ret;
+	}
+
+	/* Program the alarm and enable it for each setting */
+	regs[ISL12022_REG_SCA0 - ISL12022_ALARM] = bin2bcd(alarm_tm->tm_sec) | enable;
+	regs[ISL12022_REG_MNA0 - ISL12022_ALARM] = bin2bcd(alarm_tm->tm_min) | enable;
+	regs[ISL12022_REG_HRA0 - ISL12022_ALARM] = bin2bcd(alarm_tm->tm_hour) | enable;
+	regs[ISL12022_REG_DTA0 - ISL12022_ALARM] = bin2bcd(alarm_tm->tm_mday) | enable;
+	regs[ISL12022_REG_MOA0 - ISL12022_ALARM] = bin2bcd(alarm_tm->tm_mon + 1) | enable;
+	regs[ISL12022_REG_DWA0 - ISL12022_ALARM] = bin2bcd(alarm_tm->tm_wday & 7) | enable;
+
+	/* write ALARM registers */
+	ret = regmap_bulk_write(regmap, ISL12022_ALARM, &regs, sizeof(regs));
+	if (ret) {
+		dev_dbg(dev, "%s: writing ALARM registers failed\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+static irqreturn_t isl12022_rtc_interrupt(int irq, void *data)
+{
+	struct isl12022 *isl12022 = data;
+	struct rtc_device *rtc = isl12022->rtc;
+	struct device *dev = &rtc->dev;
+	struct regmap *regmap = isl12022->regmap;
+	u32 val = 0;
+	unsigned long events = 0;
+	int ret;
+
+	ret = regmap_read(regmap, ISL12022_REG_SR, &val);
+	if (ret) {
+		dev_dbg(dev, "%s: reading SR failed\n", __func__);
+		return IRQ_HANDLED;
+	}
+
+	if (val & ISL12022_SR_ALM)
+		events |= RTC_IRQF | RTC_AF;
+
+	if (events & RTC_AF)
+		dev_dbg(dev, "alarm!\n");
+
+	if (!events)
+		return IRQ_NONE;
+
+	rtc_update_irq(rtc, 1, events);
+	return IRQ_HANDLED;
+}
+
+static int isl12022_rtc_alarm_irq_enable(struct device *dev,
+					 unsigned int enabled)
+{
+	struct isl12022 *isl12022 = dev_get_drvdata(dev);
+
+	/* Make sure enabled is 0 or 1 */
+	enabled = !!enabled;
+
+	if (isl12022->irq_enabled == enabled)
+		return 0;
+
+	if (enabled)
+		enable_irq(isl12022->irq);
+	else
+		disable_irq(isl12022->irq);
+
+	isl12022->irq_enabled = enabled;
+
+	return 0;
+}
+
+static int isl12022_setup_irq(struct device *dev, int irq)
+{
+	struct isl12022 *isl12022 = dev_get_drvdata(dev);
+	struct regmap *regmap = isl12022->regmap;
+	unsigned int reg_mask, reg_val;
+	u8 buf[ISL12022_ALARM_LEN] = { 0, };
+	int ret;
+
+	/* Clear and disable all alarm registers */
+	ret = regmap_bulk_write(regmap, ISL12022_ALARM, buf, sizeof(buf));
+	if (ret)
+		return ret;
+
+	/*
+	 * Enable automatic reset of ALM bit and enable single event interrupt
+	 * mode.
+	 */
+	reg_mask = ISL12022_INT_ARST | ISL12022_INT_IM | ISL12022_INT_FO_MASK;
+	reg_val = ISL12022_INT_ARST | ISL12022_INT_FO_OFF;
+	ret = regmap_write_bits(regmap, ISL12022_REG_INT,
+				reg_mask, reg_val);
+	if (ret)
+		return ret;
+
+	ret = devm_request_threaded_irq(dev, irq, NULL,
+					isl12022_rtc_interrupt,
+					IRQF_SHARED | IRQF_ONESHOT,
+					isl12022_driver.driver.name,
+					isl12022);
+	if (ret)
+		return dev_err_probe(dev, ret, "Unable to request irq %d\n", irq);
+
+	isl12022->irq = irq;
+	return 0;
+}
+
 static int isl12022_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
-	struct regmap *regmap = dev_get_drvdata(dev);
+	struct isl12022 *isl12022 = dev_get_drvdata(dev);
+	struct regmap *regmap = isl12022->regmap;
 	u32 user, val;
 	int ret;
 
@@ -238,6 +456,9 @@ static const struct rtc_class_ops isl12022_rtc_ops = {
 	.ioctl		= isl12022_rtc_ioctl,
 	.read_time	= isl12022_rtc_read_time,
 	.set_time	= isl12022_rtc_set_time,
+	.read_alarm	= isl12022_rtc_read_alarm,
+	.set_alarm	= isl12022_rtc_set_alarm,
+	.alarm_irq_enable = isl12022_rtc_alarm_irq_enable,
 };
 
 static const struct regmap_config regmap_config = {
@@ -248,7 +469,8 @@ static const struct regmap_config regmap_config = {
 
 static int isl12022_register_clock(struct device *dev)
 {
-	struct regmap *regmap = dev_get_drvdata(dev);
+	struct isl12022 *isl12022 = dev_get_drvdata(dev);
+	struct regmap *regmap = isl12022->regmap;
 	struct clk_hw *hw;
 	int ret;
 
@@ -288,7 +510,8 @@ static const u32 trip_levels[2][7] = {
 
 static void isl12022_set_trip_levels(struct device *dev)
 {
-	struct regmap *regmap = dev_get_drvdata(dev);
+	struct isl12022 *isl12022 = dev_get_drvdata(dev);
+	struct regmap *regmap = isl12022->regmap;
 	u32 levels[2] = {0, 0};
 	int ret, i, j, x[2];
 	u8 val, mask;
@@ -325,6 +548,7 @@ static void isl12022_set_trip_levels(struct device *dev)
 
 static int isl12022_probe(struct i2c_client *client)
 {
+	struct isl12022 *isl12022;
 	struct rtc_device *rtc;
 	struct regmap *regmap;
 	int ret;
@@ -332,13 +556,17 @@ static int isl12022_probe(struct i2c_client *client)
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 		return -ENODEV;
 
-	regmap = devm_regmap_init_i2c(client, &regmap_config);
+	/* Allocate driver state */
-	if (IS_ERR(regmap)) {
+	isl12022 = devm_kzalloc(&client->dev, sizeof(*isl12022), GFP_KERNEL);
-		dev_err(&client->dev, "regmap allocation failed\n");
+	if (!isl12022)
-		return PTR_ERR(regmap);
+		return -ENOMEM;
-	}
 
-	dev_set_drvdata(&client->dev, regmap);
+	regmap = devm_regmap_init_i2c(client, &regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(&client->dev, PTR_ERR(regmap), "regmap allocation failed\n");
+	isl12022->regmap = regmap;
+
+	dev_set_drvdata(&client->dev, isl12022);
 
 	ret = isl12022_register_clock(&client->dev);
 	if (ret)
@@ -350,11 +578,20 @@ static int isl12022_probe(struct i2c_client *client)
 	rtc = devm_rtc_allocate_device(&client->dev);
 	if (IS_ERR(rtc))
 		return PTR_ERR(rtc);
+	isl12022->rtc = rtc;
 
 	rtc->ops = &isl12022_rtc_ops;
 	rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
 	rtc->range_max = RTC_TIMESTAMP_END_2099;
 
+	if (client->irq > 0) {
+		ret = isl12022_setup_irq(&client->dev, client->irq);
+		if (ret)
+			return ret;
+	} else {
+		clear_bit(RTC_FEATURE_ALARM, rtc->features);
+	}
+
 	return devm_rtc_register_device(rtc);
 }
 

drivers/rtc/rtc-loongson.c

@@ -381,7 +381,7 @@ MODULE_DEVICE_TABLE(acpi, loongson_rtc_acpi_match);
 
 static struct platform_driver loongson_rtc_driver = {
 	.probe		= loongson_rtc_probe,
-	.remove_new	= loongson_rtc_remove,
+	.remove		= loongson_rtc_remove,
 	.driver		= {
 		.name	= "loongson-rtc",
 		.of_match_table = loongson_rtc_of_match,

drivers/rtc/rtc-lpc24xx.c

@@ -285,7 +285,7 @@ MODULE_DEVICE_TABLE(of, lpc24xx_rtc_match);
 
 static struct platform_driver lpc24xx_rtc_driver = {
 	.probe	= lpc24xx_rtc_probe,
-	.remove_new = lpc24xx_rtc_remove,
+	.remove = lpc24xx_rtc_remove,
 	.driver	= {
 		.name = "lpc24xx-rtc",
 		.of_match_table	= lpc24xx_rtc_match,

drivers/rtc/rtc-m48t59.c

@@ -71,7 +71,7 @@ static int m48t59_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	/* Issue the READ command */
 	M48T59_SET_BITS(M48T59_CNTL_READ, M48T59_CNTL);
 
-	tm->tm_year	= bcd2bin(M48T59_READ(M48T59_YEAR));
+	tm->tm_year	= bcd2bin(M48T59_READ(M48T59_YEAR)) + pdata->yy_offset;
 	/* tm_mon is 0-11 */
 	tm->tm_mon	= bcd2bin(M48T59_READ(M48T59_MONTH)) - 1;
 	tm->tm_mday	= bcd2bin(M48T59_READ(M48T59_MDAY));
@@ -82,10 +82,6 @@ static int m48t59_rtc_read_time(struct device *dev, struct rtc_time *tm)
 		dev_dbg(dev, "Century bit is enabled\n");
 		tm->tm_year += 100;	/* one century */
 	}
-#ifdef CONFIG_SPARC
-	/* Sun SPARC machines count years since 1968 */
-	tm->tm_year += 68;
-#endif
 
 	tm->tm_wday	= bcd2bin(val & 0x07);
 	tm->tm_hour	= bcd2bin(M48T59_READ(M48T59_HOUR) & 0x3F);
@@ -106,12 +102,7 @@ static int m48t59_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	struct m48t59_private *m48t59 = dev_get_drvdata(dev);
 	unsigned long flags;
 	u8 val = 0;
-	int year = tm->tm_year;
+	int year = tm->tm_year - pdata->yy_offset;
-
-#ifdef CONFIG_SPARC
-	/* Sun SPARC machines count years since 1968 */
-	year -= 68;
-#endif
 
 	dev_dbg(dev, "RTC set time %04d-%02d-%02d %02d/%02d/%02d\n",
 		year + 1900, tm->tm_mon, tm->tm_mday,
@@ -162,11 +153,7 @@ static int m48t59_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
 	/* Issue the READ command */
 	M48T59_SET_BITS(M48T59_CNTL_READ, M48T59_CNTL);
 
-	tm->tm_year = bcd2bin(M48T59_READ(M48T59_YEAR));
+	tm->tm_year = bcd2bin(M48T59_READ(M48T59_YEAR)) + pdata->yy_offset;
-#ifdef CONFIG_SPARC
-	/* Sun SPARC machines count years since 1968 */
-	tm->tm_year += 68;
-#endif
 	/* tm_mon is 0-11 */
 	tm->tm_mon = bcd2bin(M48T59_READ(M48T59_MONTH)) - 1;
 
@@ -197,12 +184,7 @@ static int m48t59_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
 	struct rtc_time *tm = &alrm->time;
 	u8 mday, hour, min, sec;
 	unsigned long flags;
-	int year = tm->tm_year;
+	int year = tm->tm_year - pdata->yy_offset;
-
-#ifdef CONFIG_SPARC
-	/* Sun SPARC machines count years since 1968 */
-	year -= 68;
-#endif
 
 	/* If no irq, we don't support ALARM */
 	if (m48t59->irq == NO_IRQ)

drivers/rtc/rtc-max77686.c

@@ -875,7 +875,7 @@ static struct platform_driver max77686_rtc_driver = {
 		.pm	= &max77686_rtc_pm_ops,
 	},
 	.probe		= max77686_rtc_probe,
-	.remove_new	= max77686_rtc_remove,
+	.remove		= max77686_rtc_remove,
 	.id_table	= rtc_id,
 };
 

drivers/rtc/rtc-mc13xxx.c

@@ -350,7 +350,7 @@ MODULE_DEVICE_TABLE(platform, mc13xxx_rtc_idtable);
 
 static struct platform_driver mc13xxx_rtc_driver = {
 	.id_table = mc13xxx_rtc_idtable,
-	.remove_new = mc13xxx_rtc_remove,
+	.remove = mc13xxx_rtc_remove,
 	.driver = {
 		.name = DRIVER_NAME,
 	},

drivers/rtc/rtc-mc146818-lib.c

@@ -216,7 +216,7 @@ int mc146818_set_time(struct rtc_time *time)
 	unsigned char save_control, save_freq_select;
 	unsigned int yrs;
 #ifdef CONFIG_MACH_DECSTATION
-	unsigned int real_yrs, leap_yr;
+	unsigned int real_yrs;
 #endif
 	unsigned char century = 0;
 
@@ -232,8 +232,6 @@ int mc146818_set_time(struct rtc_time *time)
 
 #ifdef CONFIG_MACH_DECSTATION
 	real_yrs = yrs;
-	leap_yr = ((!((yrs + 1900) % 4) && ((yrs + 1900) % 100)) ||
-			!((yrs + 1900) % 400));
 	yrs = 72;
 
 	/*
@@ -241,7 +239,7 @@ int mc146818_set_time(struct rtc_time *time)
 	 * for non-leap years, so that Feb, 29th is handled
 	 * correctly.
 	 */
-	if (!leap_yr && mon < 3) {
+	if (!is_leap_year(real_yrs + 1900) && mon < 3) {
 		real_yrs--;
 		yrs = 73;
 	}

drivers/rtc/rtc-mpc5121.c

@@ -398,7 +398,7 @@ static struct platform_driver mpc5121_rtc_driver = {
 		.of_match_table = of_match_ptr(mpc5121_rtc_match),
 	},
 	.probe = mpc5121_rtc_probe,
-	.remove_new = mpc5121_rtc_remove,
+	.remove = mpc5121_rtc_remove,
 };
 
 module_platform_driver(mpc5121_rtc_driver);

drivers/rtc/rtc-mpfs.c

@@ -288,7 +288,7 @@ MODULE_DEVICE_TABLE(of, mpfs_rtc_of_match);
 
 static struct platform_driver mpfs_rtc_driver = {
 	.probe = mpfs_rtc_probe,
-	.remove_new = mpfs_rtc_remove,
+	.remove = mpfs_rtc_remove,
 	.driver	= {
 		.name = "mpfs_rtc",
 		.of_match_table = mpfs_rtc_of_match,

drivers/rtc/rtc-mt6397.c

@@ -75,6 +75,7 @@ static int __mtk_rtc_read_time(struct mt6397_rtc *rtc,
 	tm->tm_min = data[RTC_OFFSET_MIN];
 	tm->tm_hour = data[RTC_OFFSET_HOUR];
 	tm->tm_mday = data[RTC_OFFSET_DOM];
+	tm->tm_wday = data[RTC_OFFSET_DOW];
 	tm->tm_mon = data[RTC_OFFSET_MTH] & RTC_TC_MTH_MASK;
 	tm->tm_year = data[RTC_OFFSET_YEAR];
 
@@ -86,9 +87,8 @@ static int __mtk_rtc_read_time(struct mt6397_rtc *rtc,
 
 static int mtk_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	time64_t time;
 	struct mt6397_rtc *rtc = dev_get_drvdata(dev);
-	int days, sec, ret;
+	int sec, ret;
 
 	do {
 		ret = __mtk_rtc_read_time(rtc, tm, &sec);
@@ -96,21 +96,9 @@ static int mtk_rtc_read_time(struct device *dev, struct rtc_time *tm)
 			goto exit;
 	} while (sec < tm->tm_sec);
 
-	/* HW register use 7 bits to store year data, minus
+	/* HW register start mon/wday from one, but tm_mon/tm_wday start from zero. */
-	 * RTC_MIN_YEAR_OFFSET before write year data to register, and plus
-	 * RTC_MIN_YEAR_OFFSET back after read year from register
-	 */
-	tm->tm_year += RTC_MIN_YEAR_OFFSET;
-
-	/* HW register start mon from one, but tm_mon start from zero. */
 	tm->tm_mon--;
-	time = rtc_tm_to_time64(tm);
+	tm->tm_wday--;
-
-	/* rtc_tm_to_time64 covert Gregorian date to seconds since
-	 * 01-01-1970 00:00:00, and this date is Thursday.
-	 */
-	days = div_s64(time, 86400);
-	tm->tm_wday = (days + 4) % 7;
 
 exit:
 	return ret;
@@ -122,13 +110,14 @@ static int mtk_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	int ret;
 	u16 data[RTC_OFFSET_COUNT];
 
-	tm->tm_year -= RTC_MIN_YEAR_OFFSET;
 	tm->tm_mon++;
+	tm->tm_wday++;
 
 	data[RTC_OFFSET_SEC] = tm->tm_sec;
 	data[RTC_OFFSET_MIN] = tm->tm_min;
 	data[RTC_OFFSET_HOUR] = tm->tm_hour;
 	data[RTC_OFFSET_DOM] = tm->tm_mday;
+	data[RTC_OFFSET_DOW] = tm->tm_wday;
 	data[RTC_OFFSET_MTH] = tm->tm_mon;
 	data[RTC_OFFSET_YEAR] = tm->tm_year;
 
@@ -178,7 +167,6 @@ static int mtk_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	tm->tm_mon = data[RTC_OFFSET_MTH] & RTC_AL_MTH_MASK;
 	tm->tm_year = data[RTC_OFFSET_YEAR] & RTC_AL_YEA_MASK;
 
-	tm->tm_year += RTC_MIN_YEAR_OFFSET;
 	tm->tm_mon--;
 
 	return 0;
@@ -194,7 +182,6 @@ static int mtk_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	int ret;
 	u16 data[RTC_OFFSET_COUNT];
 
-	tm->tm_year -= RTC_MIN_YEAR_OFFSET;
 	tm->tm_mon++;
 
 	mutex_lock(&rtc->lock);
@@ -302,6 +289,10 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 	device_init_wakeup(&pdev->dev, 1);
 
 	rtc->rtc_dev->ops = &mtk_rtc_ops;
+	rtc->rtc_dev->range_min = RTC_TIMESTAMP_BEGIN_1900;
+	rtc->rtc_dev->range_max = mktime64(2027, 12, 31, 23, 59, 59);
+	rtc->rtc_dev->start_secs = mktime64(1968, 1, 2, 0, 0, 0);
+	rtc->rtc_dev->set_start_time = true;
 
 	return devm_rtc_register_device(rtc->rtc_dev);
 }

drivers/rtc/rtc-mt7622.c

@@ -394,7 +394,7 @@ static SIMPLE_DEV_PM_OPS(mtk_rtc_pm_ops, mtk_rtc_suspend, mtk_rtc_resume);
 
 static struct platform_driver mtk_rtc_driver = {
 	.probe	= mtk_rtc_probe,
-	.remove_new = mtk_rtc_remove,
+	.remove = mtk_rtc_remove,
 	.driver = {
 		.name = MTK_RTC_DEV,
 		.of_match_table = mtk_rtc_match,

drivers/rtc/rtc-mv.c

@@ -308,7 +308,7 @@ MODULE_DEVICE_TABLE(of, rtc_mv_of_match_table);
  * triggering a section mismatch warning.
  */
 static struct platform_driver mv_rtc_driver __refdata = {
-	.remove_new	= __exit_p(mv_rtc_remove),
+	.remove		= __exit_p(mv_rtc_remove),
 	.driver		= {
 		.name	= "rtc-mv",
 		.of_match_table = of_match_ptr(rtc_mv_of_match_table),

drivers/rtc/rtc-mxc_v2.c

@@ -381,7 +381,7 @@ static struct platform_driver mxc_rtc_driver = {
 		.of_match_table = mxc_ids,
 	},
 	.probe = mxc_rtc_probe,
-	.remove_new = mxc_rtc_remove,
+	.remove = mxc_rtc_remove,
 };
 
 module_platform_driver(mxc_rtc_driver);

drivers/rtc/rtc-nxp-bbnsm.c

@@ -197,13 +197,28 @@ static int bbnsm_rtc_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "failed to request irq %d: %d\n",
 			bbnsm->irq, ret);
-		return ret;
+		goto err;
 	}
 
 	bbnsm->rtc->ops = &bbnsm_rtc_ops;
 	bbnsm->rtc->range_max = U32_MAX;
 
-	return devm_rtc_register_device(bbnsm->rtc);
+	ret = devm_rtc_register_device(bbnsm->rtc);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	dev_pm_clear_wake_irq(&pdev->dev);
+	device_init_wakeup(&pdev->dev, false);
+	return ret;
+}
+
+static void bbnsm_rtc_remove(struct platform_device *pdev)
+{
+	dev_pm_clear_wake_irq(&pdev->dev);
+	device_init_wakeup(&pdev->dev, false);
 }
 
 static const struct of_device_id bbnsm_dt_ids[] = {
@@ -218,6 +233,7 @@ static struct platform_driver bbnsm_rtc_driver = {
 		.of_match_table = bbnsm_dt_ids,
 	},
 	.probe = bbnsm_rtc_probe,
+	.remove = bbnsm_rtc_remove,
 };
 module_platform_driver(bbnsm_rtc_driver);
 

drivers/rtc/rtc-omap.c

@@ -1014,7 +1014,7 @@ static void omap_rtc_shutdown(struct platform_device *pdev)
 
 static struct platform_driver omap_rtc_driver = {
 	.probe		= omap_rtc_probe,
-	.remove_new	= omap_rtc_remove,
+	.remove		= omap_rtc_remove,
 	.shutdown	= omap_rtc_shutdown,
 	.driver		= {
 		.name	= "omap_rtc",

drivers/rtc/rtc-palmas.c

@@ -346,7 +346,7 @@ MODULE_DEVICE_TABLE(of, of_palmas_rtc_match);
 
 static struct platform_driver palmas_rtc_driver = {
 	.probe		= palmas_rtc_probe,
-	.remove_new	= palmas_rtc_remove,
+	.remove		= palmas_rtc_remove,
 	.driver		= {
 		.name	= "palmas-rtc",
 		.pm	= &palmas_rtc_pm_ops,

drivers/rtc/rtc-pcf50633.c

@@ -273,7 +273,7 @@ static struct platform_driver pcf50633_rtc_driver = {
 		.name = "pcf50633-rtc",
 	},
 	.probe = pcf50633_rtc_probe,
-	.remove_new = pcf50633_rtc_remove,
+	.remove = pcf50633_rtc_remove,
 };
 
 module_platform_driver(pcf50633_rtc_driver);

drivers/rtc/rtc-pcf8563.c

@@ -11,14 +11,15 @@
  * https://www.nxp.com/docs/en/data-sheet/PCF8563.pdf
  */
 
-#include <linux/clk-provider.h>
-#include <linux/i2c.h>
 #include <linux/bcd.h>
-#include <linux/rtc.h>
+#include <linux/clk-provider.h>
-#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/err.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
 
 #define PCF8563_REG_ST1		0x00 /* status */
 #define PCF8563_REG_ST2		0x01
@@ -77,64 +78,18 @@ struct pcf8563 {
 	 */
 	int c_polarity;	/* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */
 
-	struct i2c_client *client;
+	struct regmap *regmap;
 #ifdef CONFIG_COMMON_CLK
 	struct clk_hw		clkout_hw;
 #endif
 };
 
-static int pcf8563_read_block_data(struct i2c_client *client, unsigned char reg,
+static int pcf8563_set_alarm_mode(struct pcf8563 *pcf8563, bool on)
-				   unsigned char length, unsigned char *buf)
 {
-	struct i2c_msg msgs[] = {
+	u32 buf;
-		{/* setup read ptr */
-			.addr = client->addr,
-			.len = 1,
-			.buf = &reg,
-		},
-		{
-			.addr = client->addr,
-			.flags = I2C_M_RD,
-			.len = length,
-			.buf = buf
-		},
-	};
-
-	if ((i2c_transfer(client->adapter, msgs, 2)) != 2) {
-		dev_err(&client->dev, "%s: read error\n", __func__);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int pcf8563_write_block_data(struct i2c_client *client,
-				   unsigned char reg, unsigned char length,
-				   unsigned char *buf)
-{
-	int i, err;
-
-	for (i = 0; i < length; i++) {
-		unsigned char data[2] = { reg + i, buf[i] };
-
-		err = i2c_master_send(client, data, sizeof(data));
-		if (err != sizeof(data)) {
-			dev_err(&client->dev,
-				"%s: err=%d addr=%02x, data=%02x\n",
-				__func__, err, data[0], data[1]);
-			return -EIO;
-		}
-	}
-
-	return 0;
-}
-
-static int pcf8563_set_alarm_mode(struct i2c_client *client, bool on)
-{
-	unsigned char buf;
 	int err;
 
-	err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, &buf);
+	err = regmap_read(pcf8563->regmap, PCF8563_REG_ST2, &buf);
 	if (err < 0)
 		return err;
 
@@ -145,23 +100,17 @@ static int pcf8563_set_alarm_mode(struct i2c_client *client, bool on)
 
 	buf &= ~(PCF8563_BIT_AF | PCF8563_BITS_ST2_N);
 
-	err = pcf8563_write_block_data(client, PCF8563_REG_ST2, 1, &buf);
+	return regmap_write(pcf8563->regmap, PCF8563_REG_ST2, buf);
-	if (err < 0) {
-		dev_err(&client->dev, "%s: write error\n", __func__);
-		return -EIO;
-	}
-
-	return 0;
 }
 
-static int pcf8563_get_alarm_mode(struct i2c_client *client, unsigned char *en,
+static int pcf8563_get_alarm_mode(struct pcf8563 *pcf8563, unsigned char *en,
 				  unsigned char *pen)
 {
-	unsigned char buf;
+	u32 buf;
 	int err;
 
-	err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, &buf);
+	err = regmap_read(pcf8563->regmap, PCF8563_REG_ST2, &buf);
-	if (err)
+	if (err < 0)
 		return err;
 
 	if (en)
@@ -174,17 +123,17 @@ static int pcf8563_get_alarm_mode(struct i2c_client *client, unsigned char *en,
 
 static irqreturn_t pcf8563_irq(int irq, void *dev_id)
 {
-	struct pcf8563 *pcf8563 = i2c_get_clientdata(dev_id);
+	struct pcf8563 *pcf8563 = dev_id;
-	int err;
 	char pending;
+	int err;
 
-	err = pcf8563_get_alarm_mode(pcf8563->client, NULL, &pending);
+	err = pcf8563_get_alarm_mode(pcf8563, NULL, &pending);
 	if (err)
 		return IRQ_NONE;
 
 	if (pending) {
 		rtc_update_irq(pcf8563->rtc, 1, RTC_IRQF | RTC_AF);
-		pcf8563_set_alarm_mode(pcf8563->client, 1);
+		pcf8563_set_alarm_mode(pcf8563, 1);
 		return IRQ_HANDLED;
 	}
 
@@ -197,22 +146,22 @@ static irqreturn_t pcf8563_irq(int irq, void *dev_id)
  */
 static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	struct i2c_client *client = to_i2c_client(dev);
+	struct pcf8563 *pcf8563 = dev_get_drvdata(dev);
-	struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
 	unsigned char buf[9];
 	int err;
 
-	err = pcf8563_read_block_data(client, PCF8563_REG_ST1, 9, buf);
+	err = regmap_bulk_read(pcf8563->regmap, PCF8563_REG_ST1, buf,
-	if (err)
+			       sizeof(buf));
+	if (err < 0)
 		return err;
 
 	if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) {
-		dev_err(&client->dev,
+		dev_err(dev,
 			"low voltage detected, date/time is not reliable.\n");
 		return -EINVAL;
 	}
 
-	dev_dbg(&client->dev,
+	dev_dbg(dev,
 		"%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, "
 		"mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
 		__func__,
@@ -220,7 +169,6 @@ static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
 		buf[4], buf[5], buf[6], buf[7],
 		buf[8]);
 
-
 	tm->tm_sec = bcd2bin(buf[PCF8563_REG_SC] & 0x7F);
 	tm->tm_min = bcd2bin(buf[PCF8563_REG_MN] & 0x7F);
 	tm->tm_hour = bcd2bin(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */
@@ -232,7 +180,7 @@ static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	pcf8563->c_polarity = (buf[PCF8563_REG_MO] & PCF8563_MO_C) ?
 		(tm->tm_year >= 100) : (tm->tm_year < 100);
 
-	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+	dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
 		"mday=%d, mon=%d, year=%d, wday=%d\n",
 		__func__,
 		tm->tm_sec, tm->tm_min, tm->tm_hour,
@@ -243,11 +191,10 @@ static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
-	struct i2c_client *client = to_i2c_client(dev);
+	struct pcf8563 *pcf8563 = dev_get_drvdata(dev);
-	struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
 	unsigned char buf[9];
 
-	dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+	dev_dbg(dev, "%s: secs=%d, mins=%d, hours=%d, "
 		"mday=%d, mon=%d, year=%d, wday=%d\n",
 		__func__,
 		tm->tm_sec, tm->tm_min, tm->tm_hour,
@@ -270,22 +217,24 @@ static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
 	buf[PCF8563_REG_DW] = tm->tm_wday & 0x07;
 
-	return pcf8563_write_block_data(client, PCF8563_REG_SC,
+	return regmap_bulk_write(pcf8563->regmap, PCF8563_REG_SC,
-				9 - PCF8563_REG_SC, buf + PCF8563_REG_SC);
+				buf + PCF8563_REG_SC,
+				sizeof(buf) - PCF8563_REG_SC);
 }
 
 static int pcf8563_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
-	struct i2c_client *client = to_i2c_client(dev);
+	struct pcf8563 *pcf8563 = dev_get_drvdata(dev);
 	int ret;
 
 	switch (cmd) {
 	case RTC_VL_READ:
-		ret = i2c_smbus_read_byte_data(client, PCF8563_REG_SC);
+		ret = regmap_test_bits(pcf8563->regmap, PCF8563_REG_SC,
+				       PCF8563_SC_LV);
 		if (ret < 0)
 			return ret;
 
-		return put_user(ret & PCF8563_SC_LV ? RTC_VL_DATA_INVALID : 0,
+		return put_user(ret ? RTC_VL_DATA_INVALID : 0,
 				(unsigned int __user *)arg);
 	default:
 		return -ENOIOCTLCMD;
@@ -294,15 +243,16 @@ static int pcf8563_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long
 
 static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm)
 {
-	struct i2c_client *client = to_i2c_client(dev);
+	struct pcf8563 *pcf8563 = dev_get_drvdata(dev);
 	unsigned char buf[4];
 	int err;
 
-	err = pcf8563_read_block_data(client, PCF8563_REG_AMN, 4, buf);
+	err = regmap_bulk_read(pcf8563->regmap, PCF8563_REG_AMN, buf,
-	if (err)
+			       sizeof(buf));
+	if (err < 0)
 		return err;
 
-	dev_dbg(&client->dev,
+	dev_dbg(dev,
 		"%s: raw data is min=%02x, hr=%02x, mday=%02x, wday=%02x\n",
 		__func__, buf[0], buf[1], buf[2], buf[3]);
 
@@ -312,11 +262,11 @@ static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm)
 	tm->time.tm_mday = bcd2bin(buf[2] & 0x3F);
 	tm->time.tm_wday = bcd2bin(buf[3] & 0x7);
 
-	err = pcf8563_get_alarm_mode(client, &tm->enabled, &tm->pending);
+	err = pcf8563_get_alarm_mode(pcf8563, &tm->enabled, &tm->pending);
 	if (err < 0)
 		return err;
 
-	dev_dbg(&client->dev, "%s: tm is mins=%d, hours=%d, mday=%d, wday=%d,"
+	dev_dbg(dev, "%s: tm is mins=%d, hours=%d, mday=%d, wday=%d,"
 		" enabled=%d, pending=%d\n", __func__, tm->time.tm_min,
 		tm->time.tm_hour, tm->time.tm_mday, tm->time.tm_wday,
 		tm->enabled, tm->pending);
@@ -326,7 +276,7 @@ static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm)
 
 static int pcf8563_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm)
 {
-	struct i2c_client *client = to_i2c_client(dev);
+	struct pcf8563 *pcf8563 = dev_get_drvdata(dev);
 	unsigned char buf[4];
 	int err;
 
@@ -335,17 +285,20 @@ static int pcf8563_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm)
 	buf[2] = bin2bcd(tm->time.tm_mday);
 	buf[3] = tm->time.tm_wday & 0x07;
 
-	err = pcf8563_write_block_data(client, PCF8563_REG_AMN, 4, buf);
+	err = regmap_bulk_write(pcf8563->regmap, PCF8563_REG_SC, buf,
+				sizeof(buf));
 	if (err)
 		return err;
 
-	return pcf8563_set_alarm_mode(client, !!tm->enabled);
+	return pcf8563_set_alarm_mode(pcf8563, !!tm->enabled);
 }
 
 static int pcf8563_irq_enable(struct device *dev, unsigned int enabled)
 {
+	struct pcf8563 *pcf8563 = dev_get_drvdata(dev);
+
 	dev_dbg(dev, "%s: en=%d\n", __func__, enabled);
-	return pcf8563_set_alarm_mode(to_i2c_client(dev), !!enabled);
+	return pcf8563_set_alarm_mode(pcf8563, !!enabled);
 }
 
 #ifdef CONFIG_COMMON_CLK
@@ -366,10 +319,10 @@ static unsigned long pcf8563_clkout_recalc_rate(struct clk_hw *hw,
 						unsigned long parent_rate)
 {
 	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
-	struct i2c_client *client = pcf8563->client;
+	u32 buf;
-	unsigned char buf;
+	int ret;
-	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
 
+	ret = regmap_read(pcf8563->regmap, PCF8563_REG_CLKO, &buf);
 	if (ret < 0)
 		return 0;
 
@@ -393,11 +346,10 @@ static int pcf8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
 				   unsigned long parent_rate)
 {
 	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
-	struct i2c_client *client = pcf8563->client;
+	int i, ret;
-	unsigned char buf;
+	u32 buf;
-	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
-	int i;
 
+	ret = regmap_read(pcf8563->regmap, PCF8563_REG_CLKO, &buf);
 	if (ret < 0)
 		return ret;
 
@@ -405,10 +357,10 @@ static int pcf8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
 		if (clkout_rates[i] == rate) {
 			buf &= ~PCF8563_REG_CLKO_F_MASK;
 			buf |= i;
-			ret = pcf8563_write_block_data(client,
+			return regmap_update_bits(pcf8563->regmap,
-						       PCF8563_REG_CLKO, 1,
+					    PCF8563_REG_CLKO,
-						       &buf);
+					    PCF8563_REG_CLKO_F_MASK,
-			return ret;
+					    buf);
 		}
 
 	return -EINVAL;
@@ -417,10 +369,10 @@ static int pcf8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
 static int pcf8563_clkout_control(struct clk_hw *hw, bool enable)
 {
 	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
-	struct i2c_client *client = pcf8563->client;
+	u32 buf;
-	unsigned char buf;
+	int ret;
-	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
 
+	ret = regmap_read(pcf8563->regmap, PCF8563_REG_CLKO, &buf);
 	if (ret < 0)
 		return ret;
 
@@ -429,8 +381,8 @@ static int pcf8563_clkout_control(struct clk_hw *hw, bool enable)
 	else
 		buf &= ~PCF8563_REG_CLKO_FE;
 
-	ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf);
+	return regmap_update_bits(pcf8563->regmap, PCF8563_REG_CLKO,
-	return ret;
+				  PCF8563_REG_CLKO_FE, buf);
 }
 
 static int pcf8563_clkout_prepare(struct clk_hw *hw)
@@ -446,10 +398,10 @@ static void pcf8563_clkout_unprepare(struct clk_hw *hw)
 static int pcf8563_clkout_is_prepared(struct clk_hw *hw)
 {
 	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
-	struct i2c_client *client = pcf8563->client;
+	u32 buf;
-	unsigned char buf;
+	int ret;
-	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
 
+	ret = regmap_read(pcf8563->regmap, PCF8563_REG_CLKO, &buf);
 	if (ret < 0)
 		return ret;
 
@@ -467,16 +419,14 @@ static const struct clk_ops pcf8563_clkout_ops = {
 
 static struct clk *pcf8563_clkout_register_clk(struct pcf8563 *pcf8563)
 {
-	struct i2c_client *client = pcf8563->client;
+	struct device_node *node = pcf8563->rtc->dev.of_node;
-	struct device_node *node = client->dev.of_node;
-	struct clk *clk;
 	struct clk_init_data init;
+	struct clk *clk;
 	int ret;
-	unsigned char buf;
 
 	/* disable the clkout output */
-	buf = 0;
+	ret = regmap_clear_bits(pcf8563->regmap, PCF8563_REG_CLKO,
-	ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf);
+				PCF8563_REG_CLKO_FE);
 	if (ret < 0)
 		return ERR_PTR(ret);
 
@@ -491,7 +441,7 @@ static struct clk *pcf8563_clkout_register_clk(struct pcf8563 *pcf8563)
 	of_property_read_string(node, "clock-output-names", &init.name);
 
 	/* register the clock */
-	clk = devm_clk_register(&client->dev, &pcf8563->clkout_hw);
+	clk = devm_clk_register(&pcf8563->rtc->dev, &pcf8563->clkout_hw);
 
 	if (!IS_ERR(clk))
 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
@@ -509,11 +459,16 @@ static const struct rtc_class_ops pcf8563_rtc_ops = {
 	.alarm_irq_enable = pcf8563_irq_enable,
 };
 
+static const struct regmap_config regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0xF,
+};
+
 static int pcf8563_probe(struct i2c_client *client)
 {
 	struct pcf8563 *pcf8563;
 	int err;
-	unsigned char buf;
 
 	dev_dbg(&client->dev, "%s\n", __func__);
 
@@ -525,20 +480,23 @@ static int pcf8563_probe(struct i2c_client *client)
 	if (!pcf8563)
 		return -ENOMEM;
 
+	pcf8563->regmap = devm_regmap_init_i2c(client, &regmap_config);
+	if (IS_ERR(pcf8563->regmap))
+		return PTR_ERR(pcf8563->regmap);
+
 	i2c_set_clientdata(client, pcf8563);
-	pcf8563->client = client;
+	device_set_wakeup_capable(&client->dev, 1);
 
 	/* Set timer to lowest frequency to save power (ref Haoyu datasheet) */
-	buf = PCF8563_TMRC_1_60;
+	err = regmap_set_bits(pcf8563->regmap, PCF8563_REG_TMRC,
-	err = pcf8563_write_block_data(client, PCF8563_REG_TMRC, 1, &buf);
+			      PCF8563_TMRC_1_60);
 	if (err < 0) {
 		dev_err(&client->dev, "%s: write error\n", __func__);
 		return err;
 	}
 
 	/* Clear flags and disable interrupts */
-	buf = 0;
+	err = regmap_write(pcf8563->regmap, PCF8563_REG_ST2, 0);
-	err = pcf8563_write_block_data(client, PCF8563_REG_ST2, 1, &buf);
 	if (err < 0) {
 		dev_err(&client->dev, "%s: write error\n", __func__);
 		return err;

drivers/rtc/rtc-pic32.c

@@ -371,7 +371,7 @@ MODULE_DEVICE_TABLE(of, pic32_rtc_dt_ids);
 
 static struct platform_driver pic32_rtc_driver = {
 	.probe		= pic32_rtc_probe,
-	.remove_new	= pic32_rtc_remove,
+	.remove		= pic32_rtc_remove,
 	.driver		= {
 		.name	= "pic32-rtc",
 		.of_match_table	= of_match_ptr(pic32_rtc_dt_ids),

drivers/rtc/rtc-pm8xxx.c

@@ -537,7 +537,7 @@ static void pm8xxx_remove(struct platform_device *pdev)
 
 static struct platform_driver pm8xxx_rtc_driver = {
 	.probe		= pm8xxx_rtc_probe,
-	.remove_new	= pm8xxx_remove,
+	.remove		= pm8xxx_remove,
 	.driver	= {
 		.name		= "rtc-pm8xxx",
 		.of_match_table	= pm8xxx_id_table,

drivers/rtc/rtc-pxa.c

@@ -409,7 +409,7 @@ static SIMPLE_DEV_PM_OPS(pxa_rtc_pm_ops, pxa_rtc_suspend, pxa_rtc_resume);
  * triggering a section mismatch warning.
  */
 static struct platform_driver pxa_rtc_driver __refdata = {
-	.remove_new	= __exit_p(pxa_rtc_remove),
+	.remove		= __exit_p(pxa_rtc_remove),
 	.driver		= {
 		.name	= "pxa-rtc",
 		.of_match_table = of_match_ptr(pxa_rtc_dt_ids),

drivers/rtc/rtc-rc5t583.c

@@ -298,7 +298,7 @@ static SIMPLE_DEV_PM_OPS(rc5t583_rtc_pm_ops, rc5t583_rtc_suspend,
 
 static struct platform_driver rc5t583_rtc_driver = {
 	.probe		= rc5t583_rtc_probe,
-	.remove_new	= rc5t583_rtc_remove,
+	.remove		= rc5t583_rtc_remove,
 	.driver		= {
 		.name	= "rtc-rc5t583",
 		.pm	= &rc5t583_rtc_pm_ops,

drivers/rtc/rtc-renesas-rtca3.c

@@ -0,0 +1,900 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * On-Chip RTC Support available on RZ/G3S SoC
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+#include <linux/bcd.h>
+#include <linux/bitfield.h>
+#include <linux/cleanup.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/rtc.h>
+
+/* Counter registers. */
+#define RTCA3_RSECCNT			0x2
+#define RTCA3_RSECCNT_SEC		GENMASK(6, 0)
+#define RTCA3_RMINCNT			0x4
+#define RTCA3_RMINCNT_MIN		GENMASK(6, 0)
+#define RTCA3_RHRCNT			0x6
+#define RTCA3_RHRCNT_HR			GENMASK(5, 0)
+#define RTCA3_RHRCNT_PM			BIT(6)
+#define RTCA3_RWKCNT			0x8
+#define RTCA3_RWKCNT_WK			GENMASK(2, 0)
+#define RTCA3_RDAYCNT			0xa
+#define RTCA3_RDAYCNT_DAY		GENMASK(5, 0)
+#define RTCA3_RMONCNT			0xc
+#define RTCA3_RMONCNT_MONTH		GENMASK(4, 0)
+#define RTCA3_RYRCNT			0xe
+#define RTCA3_RYRCNT_YEAR		GENMASK(7, 0)
+
+/* Alarm registers. */
+#define RTCA3_RSECAR			0x10
+#define RTCA3_RSECAR_SEC		GENMASK(6, 0)
+#define RTCA3_RMINAR			0x12
+#define RTCA3_RMINAR_MIN		GENMASK(6, 0)
+#define RTCA3_RHRAR			0x14
+#define RTCA3_RHRAR_HR			GENMASK(5, 0)
+#define RTCA3_RHRAR_PM			BIT(6)
+#define RTCA3_RWKAR			0x16
+#define RTCA3_RWKAR_DAYW		GENMASK(2, 0)
+#define RTCA3_RDAYAR			0x18
+#define RTCA3_RDAYAR_DATE		GENMASK(5, 0)
+#define RTCA3_RMONAR			0x1a
+#define RTCA3_RMONAR_MON		GENMASK(4, 0)
+#define RTCA3_RYRAR			0x1c
+#define RTCA3_RYRAR_YR			GENMASK(7, 0)
+#define RTCA3_RYRAREN			0x1e
+
+/* Alarm enable bit (for all alarm registers). */
+#define RTCA3_AR_ENB			BIT(7)
+
+/* Control registers. */
+#define RTCA3_RCR1			0x22
+#define RTCA3_RCR1_AIE			BIT(0)
+#define RTCA3_RCR1_CIE			BIT(1)
+#define RTCA3_RCR1_PIE			BIT(2)
+#define RTCA3_RCR1_PES			GENMASK(7, 4)
+#define RTCA3_RCR1_PES_1_64_SEC		0x8
+#define RTCA3_RCR2			0x24
+#define RTCA3_RCR2_START		BIT(0)
+#define RTCA3_RCR2_RESET		BIT(1)
+#define RTCA3_RCR2_AADJE		BIT(4)
+#define RTCA3_RCR2_ADJP			BIT(5)
+#define RTCA3_RCR2_HR24			BIT(6)
+#define RTCA3_RCR2_CNTMD		BIT(7)
+#define RTCA3_RSR			0x20
+#define RTCA3_RSR_AF			BIT(0)
+#define RTCA3_RSR_CF			BIT(1)
+#define RTCA3_RSR_PF			BIT(2)
+#define RTCA3_RADJ			0x2e
+#define RTCA3_RADJ_ADJ			GENMASK(5, 0)
+#define RTCA3_RADJ_ADJ_MAX		0x3f
+#define RTCA3_RADJ_PMADJ		GENMASK(7, 6)
+#define RTCA3_RADJ_PMADJ_NONE		0
+#define RTCA3_RADJ_PMADJ_ADD		1
+#define RTCA3_RADJ_PMADJ_SUB		2
+
+/* Polling operation timeouts. */
+#define RTCA3_DEFAULT_TIMEOUT_US	150
+#define RTCA3_IRQSET_TIMEOUT_US		5000
+#define RTCA3_START_TIMEOUT_US		150000
+#define RTCA3_RESET_TIMEOUT_US		200000
+
+/**
+ * enum rtca3_alrm_set_step - RTCA3 alarm set steps
+ * @RTCA3_ALRM_SSTEP_DONE: alarm setup done step
+ * @RTCA3_ALRM_SSTEP_IRQ: two 1/64 periodic IRQs were generated step
+ * @RTCA3_ALRM_SSTEP_INIT: alarm setup initialization step
+ */
+enum rtca3_alrm_set_step {
+	RTCA3_ALRM_SSTEP_DONE = 0,
+	RTCA3_ALRM_SSTEP_IRQ = 1,
+	RTCA3_ALRM_SSTEP_INIT = 3,
+};
+
+/**
+ * struct rtca3_ppb_per_cycle - PPB per cycle
+ * @ten_sec: PPB per cycle in 10 seconds adjutment mode
+ * @sixty_sec: PPB per cycle in 60 seconds adjustment mode
+ */
+struct rtca3_ppb_per_cycle {
+	int ten_sec;
+	int sixty_sec;
+};
+
+/**
+ * struct rtca3_priv - RTCA3 private data structure
+ * @base: base address
+ * @rtc_dev: RTC device
+ * @rstc: reset control
+ * @set_alarm_completion: alarm setup completion
+ * @alrm_sstep: alarm setup step (see enum rtca3_alrm_set_step)
+ * @lock: device lock
+ * @ppb: ppb per cycle for each the available adjustment modes
+ * @wakeup_irq: wakeup IRQ
+ */
+struct rtca3_priv {
+	void __iomem *base;
+	struct rtc_device *rtc_dev;
+	struct reset_control *rstc;
+	struct completion set_alarm_completion;
+	atomic_t alrm_sstep;
+	spinlock_t lock;
+	struct rtca3_ppb_per_cycle ppb;
+	int wakeup_irq;
+};
+
+static void rtca3_byte_update_bits(struct rtca3_priv *priv, u8 off, u8 mask, u8 val)
+{
+	u8 tmp;
+
+	tmp = readb(priv->base + off);
+	tmp &= ~mask;
+	tmp |= (val & mask);
+	writeb(tmp, priv->base + off);
+}
+
+static u8 rtca3_alarm_handler_helper(struct rtca3_priv *priv)
+{
+	u8 val, pending;
+
+	val = readb(priv->base + RTCA3_RSR);
+	pending = val & RTCA3_RSR_AF;
+	writeb(val & ~pending, priv->base + RTCA3_RSR);
+
+	if (pending)
+		rtc_update_irq(priv->rtc_dev, 1, RTC_AF | RTC_IRQF);
+
+	return pending;
+}
+
+static irqreturn_t rtca3_alarm_handler(int irq, void *dev_id)
+{
+	struct rtca3_priv *priv = dev_id;
+	u8 pending;
+
+	guard(spinlock)(&priv->lock);
+
+	pending = rtca3_alarm_handler_helper(priv);
+
+	return IRQ_RETVAL(pending);
+}
+
+static irqreturn_t rtca3_periodic_handler(int irq, void *dev_id)
+{
+	struct rtca3_priv *priv = dev_id;
+	u8 val, pending;
+
+	guard(spinlock)(&priv->lock);
+
+	val = readb(priv->base + RTCA3_RSR);
+	pending = val & RTCA3_RSR_PF;
+
+	if (pending) {
+		writeb(val & ~pending, priv->base + RTCA3_RSR);
+
+		if (atomic_read(&priv->alrm_sstep) > RTCA3_ALRM_SSTEP_IRQ) {
+			/* Alarm setup in progress. */
+			atomic_dec(&priv->alrm_sstep);
+
+			if (atomic_read(&priv->alrm_sstep) == RTCA3_ALRM_SSTEP_IRQ) {
+				/*
+				 * We got 2 * 1/64 periodic interrupts. Disable
+				 * interrupt and let alarm setup continue.
+				 */
+				rtca3_byte_update_bits(priv, RTCA3_RCR1,
+						       RTCA3_RCR1_PIE, 0);
+				readb_poll_timeout_atomic(priv->base + RTCA3_RCR1, val,
+							  !(val & RTCA3_RCR1_PIE),
+							  10, RTCA3_DEFAULT_TIMEOUT_US);
+				complete(&priv->set_alarm_completion);
+			}
+		}
+	}
+
+	return IRQ_RETVAL(pending);
+}
+
+static void rtca3_prepare_cntalrm_regs_for_read(struct rtca3_priv *priv, bool cnt)
+{
+	/* Offset b/w time and alarm registers. */
+	u8 offset = cnt ? 0 : 0xe;
+
+	/*
+	 * According to HW manual (section 22.6.4. Notes on writing to and
+	 * reading from registers) after writing to count registers, alarm
+	 * registers, year alarm enable register, bits RCR2.AADJE, AADJP,
+	 * and HR24 register, we need to do 3 empty reads before being
+	 * able to fetch the registers content.
+	 */
+	for (u8 i = 0; i < 3; i++) {
+		readb(priv->base + RTCA3_RSECCNT + offset);
+		readb(priv->base + RTCA3_RMINCNT + offset);
+		readb(priv->base + RTCA3_RHRCNT  + offset);
+		readb(priv->base + RTCA3_RWKCNT  + offset);
+		readb(priv->base + RTCA3_RDAYCNT + offset);
+		readw(priv->base + RTCA3_RYRCNT  + offset);
+		if (!cnt)
+			readb(priv->base + RTCA3_RYRAREN);
+	}
+}
+
+static int rtca3_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rtca3_priv *priv = dev_get_drvdata(dev);
+	u8 sec, min, hour, wday, mday, month, tmp;
+	u8 trials = 0;
+	u32 year100;
+	u16 year;
+
+	guard(spinlock_irqsave)(&priv->lock);
+
+	tmp = readb(priv->base + RTCA3_RCR2);
+	if (!(tmp & RTCA3_RCR2_START))
+		return -EINVAL;
+
+	do {
+		/* Clear carry interrupt. */
+		rtca3_byte_update_bits(priv, RTCA3_RSR, RTCA3_RSR_CF, 0);
+
+		/* Read counters. */
+		sec = readb(priv->base + RTCA3_RSECCNT);
+		min = readb(priv->base + RTCA3_RMINCNT);
+		hour = readb(priv->base + RTCA3_RHRCNT);
+		wday = readb(priv->base + RTCA3_RWKCNT);
+		mday = readb(priv->base + RTCA3_RDAYCNT);
+		month = readb(priv->base + RTCA3_RMONCNT);
+		year = readw(priv->base + RTCA3_RYRCNT);
+
+		tmp = readb(priv->base + RTCA3_RSR);
+
+		/*
+		 * We cannot generate carries due to reading 64Hz counter as
+		 * the driver doesn't implement carry, thus, carries will be
+		 * generated once per seconds. Add a timeout of 5 trials here
+		 * to avoid infinite loop, if any.
+		 */
+	} while ((tmp & RTCA3_RSR_CF) && ++trials < 5);
+
+	if (trials >= 5)
+		return -ETIMEDOUT;
+
+	tm->tm_sec = bcd2bin(FIELD_GET(RTCA3_RSECCNT_SEC, sec));
+	tm->tm_min = bcd2bin(FIELD_GET(RTCA3_RMINCNT_MIN, min));
+	tm->tm_hour = bcd2bin(FIELD_GET(RTCA3_RHRCNT_HR, hour));
+	tm->tm_wday = bcd2bin(FIELD_GET(RTCA3_RWKCNT_WK, wday));
+	tm->tm_mday = bcd2bin(FIELD_GET(RTCA3_RDAYCNT_DAY, mday));
+	tm->tm_mon = bcd2bin(FIELD_GET(RTCA3_RMONCNT_MONTH, month)) - 1;
+	year = FIELD_GET(RTCA3_RYRCNT_YEAR, year);
+	year100 = bcd2bin((year == 0x99) ? 0x19 : 0x20);
+	tm->tm_year = (year100 * 100 + bcd2bin(year)) - 1900;
+
+	return 0;
+}
+
+static int rtca3_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rtca3_priv *priv = dev_get_drvdata(dev);
+	u8 rcr2, tmp;
+	int ret;
+
+	guard(spinlock_irqsave)(&priv->lock);
+
+	/* Stop the RTC. */
+	rcr2 = readb(priv->base + RTCA3_RCR2);
+	writeb(rcr2 & ~RTCA3_RCR2_START, priv->base + RTCA3_RCR2);
+	ret = readb_poll_timeout_atomic(priv->base + RTCA3_RCR2, tmp,
+					!(tmp & RTCA3_RCR2_START),
+					10, RTCA3_DEFAULT_TIMEOUT_US);
+	if (ret)
+		return ret;
+
+	/* Update time. */
+	writeb(bin2bcd(tm->tm_sec), priv->base + RTCA3_RSECCNT);
+	writeb(bin2bcd(tm->tm_min), priv->base + RTCA3_RMINCNT);
+	writeb(bin2bcd(tm->tm_hour), priv->base + RTCA3_RHRCNT);
+	writeb(bin2bcd(tm->tm_wday), priv->base + RTCA3_RWKCNT);
+	writeb(bin2bcd(tm->tm_mday), priv->base + RTCA3_RDAYCNT);
+	writeb(bin2bcd(tm->tm_mon + 1), priv->base + RTCA3_RMONCNT);
+	writew(bin2bcd(tm->tm_year % 100), priv->base + RTCA3_RYRCNT);
+
+	/* Make sure we can read back the counters. */
+	rtca3_prepare_cntalrm_regs_for_read(priv, true);
+
+	/* Start RTC. */
+	writeb(rcr2 | RTCA3_RCR2_START, priv->base + RTCA3_RCR2);
+	return readb_poll_timeout_atomic(priv->base + RTCA3_RCR2, tmp,
+					 (tmp & RTCA3_RCR2_START),
+					 10, RTCA3_DEFAULT_TIMEOUT_US);
+}
+
+static int rtca3_alarm_irq_set_helper(struct rtca3_priv *priv,
+				      u8 interrupts,
+				      unsigned int enabled)
+{
+	u8 tmp, val;
+
+	if (enabled) {
+		/*
+		 * AIE, CIE, PIE bit indexes in RSR corresponds with
+		 * those on RCR1. Same interrupts mask can be used.
+		 */
+		rtca3_byte_update_bits(priv, RTCA3_RSR, interrupts, 0);
+		val = interrupts;
+	} else {
+		val = 0;
+	}
+
+	rtca3_byte_update_bits(priv, RTCA3_RCR1, interrupts, val);
+	return readb_poll_timeout_atomic(priv->base + RTCA3_RCR1, tmp,
+					 ((tmp & interrupts) == val),
+					 10, RTCA3_IRQSET_TIMEOUT_US);
+}
+
+static int rtca3_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct rtca3_priv *priv = dev_get_drvdata(dev);
+
+	guard(spinlock_irqsave)(&priv->lock);
+
+	return rtca3_alarm_irq_set_helper(priv, RTCA3_RCR1_AIE, enabled);
+}
+
+static int rtca3_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct rtca3_priv *priv = dev_get_drvdata(dev);
+	u8 sec, min, hour, wday, mday, month;
+	struct rtc_time *tm = &wkalrm->time;
+	u32 year100;
+	u16 year;
+
+	guard(spinlock_irqsave)(&priv->lock);
+
+	sec = readb(priv->base + RTCA3_RSECAR);
+	min = readb(priv->base + RTCA3_RMINAR);
+	hour = readb(priv->base + RTCA3_RHRAR);
+	wday = readb(priv->base + RTCA3_RWKAR);
+	mday = readb(priv->base + RTCA3_RDAYAR);
+	month = readb(priv->base + RTCA3_RMONAR);
+	year = readw(priv->base + RTCA3_RYRAR);
+
+	tm->tm_sec = bcd2bin(FIELD_GET(RTCA3_RSECAR_SEC, sec));
+	tm->tm_min = bcd2bin(FIELD_GET(RTCA3_RMINAR_MIN, min));
+	tm->tm_hour = bcd2bin(FIELD_GET(RTCA3_RHRAR_HR, hour));
+	tm->tm_wday = bcd2bin(FIELD_GET(RTCA3_RWKAR_DAYW, wday));
+	tm->tm_mday = bcd2bin(FIELD_GET(RTCA3_RDAYAR_DATE, mday));
+	tm->tm_mon = bcd2bin(FIELD_GET(RTCA3_RMONAR_MON, month)) - 1;
+	year = FIELD_GET(RTCA3_RYRAR_YR, year);
+	year100 = bcd2bin((year == 0x99) ? 0x19 : 0x20);
+	tm->tm_year = (year100 * 100 + bcd2bin(year)) - 1900;
+
+	wkalrm->enabled = !!(readb(priv->base + RTCA3_RCR1) & RTCA3_RCR1_AIE);
+
+	return 0;
+}
+
+static int rtca3_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct rtca3_priv *priv = dev_get_drvdata(dev);
+	struct rtc_time *tm = &wkalrm->time;
+	u8 rcr1, tmp;
+	int ret;
+
+	scoped_guard(spinlock_irqsave, &priv->lock) {
+		tmp = readb(priv->base + RTCA3_RCR2);
+		if (!(tmp & RTCA3_RCR2_START))
+			return -EPERM;
+
+		/* Disable AIE to prevent false interrupts. */
+		rcr1 = readb(priv->base + RTCA3_RCR1);
+		rcr1 &= ~RTCA3_RCR1_AIE;
+		writeb(rcr1, priv->base + RTCA3_RCR1);
+		ret = readb_poll_timeout_atomic(priv->base + RTCA3_RCR1, tmp,
+						!(tmp & RTCA3_RCR1_AIE),
+						10, RTCA3_DEFAULT_TIMEOUT_US);
+		if (ret)
+			return ret;
+
+		/* Set the time and enable the alarm. */
+		writeb(RTCA3_AR_ENB | bin2bcd(tm->tm_sec), priv->base + RTCA3_RSECAR);
+		writeb(RTCA3_AR_ENB | bin2bcd(tm->tm_min), priv->base + RTCA3_RMINAR);
+		writeb(RTCA3_AR_ENB | bin2bcd(tm->tm_hour), priv->base + RTCA3_RHRAR);
+		writeb(RTCA3_AR_ENB | bin2bcd(tm->tm_wday), priv->base + RTCA3_RWKAR);
+		writeb(RTCA3_AR_ENB | bin2bcd(tm->tm_mday), priv->base + RTCA3_RDAYAR);
+		writeb(RTCA3_AR_ENB | bin2bcd(tm->tm_mon + 1), priv->base + RTCA3_RMONAR);
+
+		writew(bin2bcd(tm->tm_year % 100), priv->base + RTCA3_RYRAR);
+		writeb(RTCA3_AR_ENB, priv->base + RTCA3_RYRAREN);
+
+		/* Make sure we can read back the counters. */
+		rtca3_prepare_cntalrm_regs_for_read(priv, false);
+
+		/* Need to wait for 2 * 1/64 periodic interrupts to be generated. */
+		atomic_set(&priv->alrm_sstep, RTCA3_ALRM_SSTEP_INIT);
+		reinit_completion(&priv->set_alarm_completion);
+
+		/* Enable periodic interrupt. */
+		rcr1 |= RTCA3_RCR1_PIE;
+		writeb(rcr1, priv->base + RTCA3_RCR1);
+		ret = readb_poll_timeout_atomic(priv->base + RTCA3_RCR1, tmp,
+						(tmp & RTCA3_RCR1_PIE),
+						10, RTCA3_IRQSET_TIMEOUT_US);
+	}
+
+	if (ret)
+		goto setup_failed;
+
+	/* Wait for the 2 * 1/64 periodic interrupts. */
+	ret = wait_for_completion_interruptible_timeout(&priv->set_alarm_completion,
+							msecs_to_jiffies(500));
+	if (ret <= 0) {
+		ret = -ETIMEDOUT;
+		goto setup_failed;
+	}
+
+	scoped_guard(spinlock_irqsave, &priv->lock) {
+		ret = rtca3_alarm_irq_set_helper(priv, RTCA3_RCR1_AIE, wkalrm->enabled);
+		atomic_set(&priv->alrm_sstep, RTCA3_ALRM_SSTEP_DONE);
+	}
+
+	return ret;
+
+setup_failed:
+	scoped_guard(spinlock_irqsave, &priv->lock) {
+		/*
+		 * Disable PIE to avoid interrupt storm in case HW needed more than
+		 * specified timeout for setup.
+		 */
+		writeb(rcr1 & ~RTCA3_RCR1_PIE, priv->base + RTCA3_RCR1);
+		readb_poll_timeout_atomic(priv->base + RTCA3_RCR1, tmp, !(tmp & ~RTCA3_RCR1_PIE),
+					  10, RTCA3_DEFAULT_TIMEOUT_US);
+		atomic_set(&priv->alrm_sstep, RTCA3_ALRM_SSTEP_DONE);
+	}
+
+	return ret;
+}
+
+static int rtca3_read_offset(struct device *dev, long *offset)
+{
+	struct rtca3_priv *priv = dev_get_drvdata(dev);
+	u8 val, radj, cycles;
+	u32 ppb_per_cycle;
+
+	scoped_guard(spinlock_irqsave, &priv->lock) {
+		radj = readb(priv->base + RTCA3_RADJ);
+		val = readb(priv->base + RTCA3_RCR2);
+	}
+
+	cycles = FIELD_GET(RTCA3_RADJ_ADJ, radj);
+
+	if (!cycles) {
+		*offset = 0;
+		return 0;
+	}
+
+	if (val & RTCA3_RCR2_ADJP)
+		ppb_per_cycle = priv->ppb.ten_sec;
+	else
+		ppb_per_cycle = priv->ppb.sixty_sec;
+
+	*offset = cycles * ppb_per_cycle;
+	val = FIELD_GET(RTCA3_RADJ_PMADJ, radj);
+	if (val == RTCA3_RADJ_PMADJ_SUB)
+		*offset = -(*offset);
+
+	return 0;
+}
+
+static int rtca3_set_offset(struct device *dev, long offset)
+{
+	struct rtca3_priv *priv = dev_get_drvdata(dev);
+	int cycles, cycles10, cycles60;
+	u8 radj, adjp, tmp;
+	int ret;
+
+	/*
+	 * Automatic time error adjustment could be set at intervals of 10
+	 * or 60 seconds.
+	 */
+	cycles10 = DIV_ROUND_CLOSEST(offset, priv->ppb.ten_sec);
+	cycles60 = DIV_ROUND_CLOSEST(offset, priv->ppb.sixty_sec);
+
+	/* We can set b/w 1 and 63 clock cycles. */
+	if (cycles60 >= -RTCA3_RADJ_ADJ_MAX &&
+	    cycles60 <= RTCA3_RADJ_ADJ_MAX) {
+		cycles = cycles60;
+		adjp = 0;
+	} else if (cycles10 >= -RTCA3_RADJ_ADJ_MAX &&
+		   cycles10 <= RTCA3_RADJ_ADJ_MAX) {
+		cycles = cycles10;
+		adjp = RTCA3_RCR2_ADJP;
+	} else {
+		return -ERANGE;
+	}
+
+	radj = FIELD_PREP(RTCA3_RADJ_ADJ, abs(cycles));
+	if (!cycles)
+		radj |= FIELD_PREP(RTCA3_RADJ_PMADJ, RTCA3_RADJ_PMADJ_NONE);
+	else if (cycles > 0)
+		radj |= FIELD_PREP(RTCA3_RADJ_PMADJ, RTCA3_RADJ_PMADJ_ADD);
+	else
+		radj |= FIELD_PREP(RTCA3_RADJ_PMADJ, RTCA3_RADJ_PMADJ_SUB);
+
+	guard(spinlock_irqsave)(&priv->lock);
+
+	tmp = readb(priv->base + RTCA3_RCR2);
+
+	if ((tmp & RTCA3_RCR2_ADJP) != adjp) {
+		/* RADJ.PMADJ need to be set to zero before setting RCR2.ADJP. */
+		writeb(0, priv->base + RTCA3_RADJ);
+		ret = readb_poll_timeout_atomic(priv->base + RTCA3_RADJ, tmp, !tmp,
+						10, RTCA3_DEFAULT_TIMEOUT_US);
+		if (ret)
+			return ret;
+
+		rtca3_byte_update_bits(priv, RTCA3_RCR2, RTCA3_RCR2_ADJP, adjp);
+		ret = readb_poll_timeout_atomic(priv->base + RTCA3_RCR2, tmp,
+						((tmp & RTCA3_RCR2_ADJP) == adjp),
+						10, RTCA3_DEFAULT_TIMEOUT_US);
+		if (ret)
+			return ret;
+	}
+
+	writeb(radj, priv->base + RTCA3_RADJ);
+	return readb_poll_timeout_atomic(priv->base + RTCA3_RADJ, tmp, (tmp == radj),
+					 10, RTCA3_DEFAULT_TIMEOUT_US);
+}
+
+static const struct rtc_class_ops rtca3_ops = {
+	.read_time = rtca3_read_time,
+	.set_time = rtca3_set_time,
+	.read_alarm = rtca3_read_alarm,
+	.set_alarm = rtca3_set_alarm,
+	.alarm_irq_enable = rtca3_alarm_irq_enable,
+	.set_offset = rtca3_set_offset,
+	.read_offset = rtca3_read_offset,
+};
+
+static int rtca3_initial_setup(struct clk *clk, struct rtca3_priv *priv)
+{
+	unsigned long osc32k_rate;
+	u8 val, tmp, mask;
+	u32 sleep_us;
+	int ret;
+
+	osc32k_rate = clk_get_rate(clk);
+	if (!osc32k_rate)
+		return -EINVAL;
+
+	sleep_us = DIV_ROUND_UP_ULL(1000000ULL, osc32k_rate) * 6;
+
+	priv->ppb.ten_sec = DIV_ROUND_CLOSEST_ULL(1000000000ULL, (osc32k_rate * 10));
+	priv->ppb.sixty_sec = DIV_ROUND_CLOSEST_ULL(1000000000ULL, (osc32k_rate * 60));
+
+	/*
+	 * According to HW manual (section 22.4.2. Clock and count mode setting procedure)
+	 * we need to wait at least 6 cycles of the 32KHz clock after clock was enabled.
+	 */
+	usleep_range(sleep_us, sleep_us + 10);
+
+	/* Disable all interrupts. */
+	mask = RTCA3_RCR1_AIE | RTCA3_RCR1_CIE | RTCA3_RCR1_PIE;
+	ret = rtca3_alarm_irq_set_helper(priv, mask, 0);
+	if (ret)
+		return ret;
+
+	mask = RTCA3_RCR2_START | RTCA3_RCR2_HR24;
+	val = readb(priv->base + RTCA3_RCR2);
+	/* Nothing to do if already started in 24 hours and calendar count mode. */
+	if ((val & mask) == mask)
+		return 0;
+
+	/* Reconfigure the RTC in 24 hours and calendar count mode. */
+	mask = RTCA3_RCR2_START | RTCA3_RCR2_CNTMD;
+	writeb(0, priv->base + RTCA3_RCR2);
+	ret = readb_poll_timeout(priv->base + RTCA3_RCR2, tmp, !(tmp & mask),
+				 10, RTCA3_DEFAULT_TIMEOUT_US);
+	if (ret)
+		return ret;
+
+	/*
+	 * Set 24 hours mode. According to HW manual (section 22.3.19. RTC Control
+	 * Register 2) this needs to be done separate from stop operation.
+	 */
+	mask = RTCA3_RCR2_HR24;
+	val = RTCA3_RCR2_HR24;
+	writeb(val, priv->base + RTCA3_RCR2);
+	ret = readb_poll_timeout(priv->base + RTCA3_RCR2, tmp, (tmp & mask),
+				 10, RTCA3_DEFAULT_TIMEOUT_US);
+	if (ret)
+		return ret;
+
+	/* Execute reset. */
+	mask = RTCA3_RCR2_RESET;
+	writeb(val | RTCA3_RCR2_RESET, priv->base + RTCA3_RCR2);
+	ret = readb_poll_timeout(priv->base + RTCA3_RCR2, tmp, !(tmp & mask),
+				 10, RTCA3_RESET_TIMEOUT_US);
+	if (ret)
+		return ret;
+
+	/*
+	 * According to HW manual (section 22.6.3. Notes on writing to and reading
+	 * from registers) after reset we need to wait 6 clock cycles before
+	 * writing to RTC registers.
+	 */
+	usleep_range(sleep_us, sleep_us + 10);
+
+	/* Set no adjustment. */
+	writeb(0, priv->base + RTCA3_RADJ);
+	ret = readb_poll_timeout(priv->base + RTCA3_RADJ, tmp, !tmp, 10,
+				 RTCA3_DEFAULT_TIMEOUT_US);
+
+	/* Start the RTC and enable automatic time error adjustment. */
+	mask = RTCA3_RCR2_START | RTCA3_RCR2_AADJE;
+	val |= RTCA3_RCR2_START | RTCA3_RCR2_AADJE;
+	writeb(val, priv->base + RTCA3_RCR2);
+	ret = readb_poll_timeout(priv->base + RTCA3_RCR2, tmp, ((tmp & mask) == mask),
+				 10, RTCA3_START_TIMEOUT_US);
+	if (ret)
+		return ret;
+
+	/*
+	 * According to HW manual (section 22.6.4. Notes on writing to and reading
+	 * from registers) we need to wait 1/128 seconds while the clock is operating
+	 * (RCR2.START bit = 1) to be able to read the counters after a return from
+	 * reset.
+	 */
+	usleep_range(8000, 9000);
+
+	/* Set period interrupt to 1/64 seconds. It is necessary for alarm setup. */
+	val = FIELD_PREP(RTCA3_RCR1_PES, RTCA3_RCR1_PES_1_64_SEC);
+	rtca3_byte_update_bits(priv, RTCA3_RCR1, RTCA3_RCR1_PES, val);
+	return readb_poll_timeout(priv->base + RTCA3_RCR1, tmp, ((tmp & RTCA3_RCR1_PES) == val),
+				  10, RTCA3_DEFAULT_TIMEOUT_US);
+}
+
+static int rtca3_request_irqs(struct platform_device *pdev, struct rtca3_priv *priv)
+{
+	struct device *dev = &pdev->dev;
+	int ret, irq;
+
+	irq = platform_get_irq_byname(pdev, "alarm");
+	if (irq < 0)
+		return dev_err_probe(dev, irq, "Failed to get alarm IRQ!\n");
+
+	ret = devm_request_irq(dev, irq, rtca3_alarm_handler, 0, "rtca3-alarm", priv);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to request alarm IRQ!\n");
+	priv->wakeup_irq = irq;
+
+	irq = platform_get_irq_byname(pdev, "period");
+	if (irq < 0)
+		return dev_err_probe(dev, irq, "Failed to get period IRQ!\n");
+
+	ret = devm_request_irq(dev, irq, rtca3_periodic_handler, 0, "rtca3-period", priv);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to request period IRQ!\n");
+
+	/*
+	 * Driver doesn't implement carry handler. Just get the IRQ here
+	 * for backward compatibility, in case carry support will be added later.
+	 */
+	irq = platform_get_irq_byname(pdev, "carry");
+	if (irq < 0)
+		return dev_err_probe(dev, irq, "Failed to get carry IRQ!\n");
+
+	return 0;
+}
+
+static void rtca3_action(void *data)
+{
+	struct device *dev = data;
+	struct rtca3_priv *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = reset_control_assert(priv->rstc);
+	if (ret)
+		dev_err(dev, "Failed to de-assert reset!");
+
+	ret = pm_runtime_put_sync(dev);
+	if (ret < 0)
+		dev_err(dev, "Failed to runtime suspend!");
+}
+
+static int rtca3_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rtca3_priv *priv;
+	struct clk *clk;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return ret;
+
+	priv->rstc = devm_reset_control_get_shared(dev, NULL);
+	if (IS_ERR(priv->rstc))
+		return PTR_ERR(priv->rstc);
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
+		return ret;
+
+	ret = reset_control_deassert(priv->rstc);
+	if (ret) {
+		pm_runtime_put_sync(dev);
+		return ret;
+	}
+
+	dev_set_drvdata(dev, priv);
+	ret = devm_add_action_or_reset(dev, rtca3_action, dev);
+	if (ret)
+		return ret;
+
+	/*
+	 * This must be an always-on clock to keep the RTC running even after
+	 * driver is unbinded.
+	 */
+	clk = devm_clk_get_enabled(dev, "counter");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	spin_lock_init(&priv->lock);
+	atomic_set(&priv->alrm_sstep, RTCA3_ALRM_SSTEP_DONE);
+	init_completion(&priv->set_alarm_completion);
+
+	ret = rtca3_initial_setup(clk, priv);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to setup the RTC!\n");
+
+	ret = rtca3_request_irqs(pdev, priv);
+	if (ret)
+		return ret;
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	priv->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(priv->rtc_dev))
+		return PTR_ERR(priv->rtc_dev);
+
+	priv->rtc_dev->ops = &rtca3_ops;
+	priv->rtc_dev->max_user_freq = 256;
+	priv->rtc_dev->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	priv->rtc_dev->range_max = RTC_TIMESTAMP_END_2099;
+
+	return devm_rtc_register_device(priv->rtc_dev);
+}
+
+static void rtca3_remove(struct platform_device *pdev)
+{
+	struct rtca3_priv *priv = platform_get_drvdata(pdev);
+
+	guard(spinlock_irqsave)(&priv->lock);
+
+	/*
+	 * Disable alarm, periodic interrupts. The RTC device cannot
+	 * power up the system.
+	 */
+	rtca3_alarm_irq_set_helper(priv, RTCA3_RCR1_AIE | RTCA3_RCR1_PIE, 0);
+}
+
+static int rtca3_suspend(struct device *dev)
+{
+	struct rtca3_priv *priv = dev_get_drvdata(dev);
+
+	if (!device_may_wakeup(dev))
+		return 0;
+
+	/* Alarm setup in progress. */
+	if (atomic_read(&priv->alrm_sstep) != RTCA3_ALRM_SSTEP_DONE)
+		return -EBUSY;
+
+	enable_irq_wake(priv->wakeup_irq);
+
+	return 0;
+}
+
+static int rtca3_clean_alarm(struct rtca3_priv *priv)
+{
+	struct rtc_device *rtc_dev = priv->rtc_dev;
+	time64_t alarm_time, now;
+	struct rtc_wkalrm alarm;
+	struct rtc_time tm;
+	u8 pending;
+	int ret;
+
+	ret = rtc_read_alarm(rtc_dev, &alarm);
+	if (ret)
+		return ret;
+
+	if (!alarm.enabled)
+		return 0;
+
+	ret = rtc_read_time(rtc_dev, &tm);
+	if (ret)
+		return ret;
+
+	alarm_time = rtc_tm_to_time64(&alarm.time);
+	now = rtc_tm_to_time64(&tm);
+	if (alarm_time >= now)
+		return 0;
+
+	/*
+	 * Heuristically, it has been determined that when returning from deep
+	 * sleep state the RTCA3_RSR.AF is zero even though the alarm expired.
+	 * Call again the rtc_update_irq() if alarm helper detects this.
+	 */
+
+	guard(spinlock_irqsave)(&priv->lock);
+
+	pending = rtca3_alarm_handler_helper(priv);
+	if (!pending)
+		rtc_update_irq(priv->rtc_dev, 1, RTC_AF | RTC_IRQF);
+
+	return 0;
+}
+
+static int rtca3_resume(struct device *dev)
+{
+	struct rtca3_priv *priv = dev_get_drvdata(dev);
+
+	if (!device_may_wakeup(dev))
+		return 0;
+
+	disable_irq_wake(priv->wakeup_irq);
+
+	/*
+	 * According to the HW manual (section 22.6.4 Notes on writing to
+	 * and reading from registers) we need to wait 1/128 seconds while
+	 * RCR2.START = 1 to be able to read the counters after a return from low
+	 * power consumption state.
+	 */
+	mdelay(8);
+
+	/*
+	 * The alarm cannot wake the system from deep sleep states. In case
+	 * we return from deep sleep states and the alarm expired we need
+	 * to disable it to avoid failures when setting another alarm.
+	 */
+	return rtca3_clean_alarm(priv);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(rtca3_pm_ops, rtca3_suspend, rtca3_resume);
+
+static const struct of_device_id rtca3_of_match[] = {
+	{ .compatible = "renesas,rz-rtca3", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rtca3_of_match);
+
+static struct platform_driver rtca3_platform_driver = {
+	.driver = {
+		.name = "rtc-rtca3",
+		.pm = pm_ptr(&rtca3_pm_ops),
+		.of_match_table = rtca3_of_match,
+	},
+	.probe = rtca3_probe,
+	.remove = rtca3_remove,
+};
+module_platform_driver(rtca3_platform_driver);
+
+MODULE_DESCRIPTION("Renesas RTCA-3 RTC driver");
+MODULE_AUTHOR("Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>");
+MODULE_LICENSE("GPL");

drivers/rtc/rtc-rtd119x.c

@@ -228,7 +228,7 @@ static void rtd119x_rtc_remove(struct platform_device *pdev)
 
 static struct platform_driver rtd119x_rtc_driver = {
 	.probe = rtd119x_rtc_probe,
-	.remove_new = rtd119x_rtc_remove,
+	.remove = rtd119x_rtc_remove,
 	.driver = {
 		.name = "rtd1295-rtc",
 		.of_match_table	= rtd119x_rtc_dt_ids,

drivers/rtc/rtc-rv3028.c

@@ -120,8 +120,9 @@ static ssize_t timestamp0_show(struct device *dev,
 {
 	struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent);
 	struct rtc_time tm;
-	int ret, count;
+	unsigned int count;
 	u8 date[6];
+	int ret;
 
 	ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count);
 	if (ret)
@@ -156,7 +157,8 @@ static ssize_t timestamp0_count_show(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
 	struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent);
-	int ret, count;
+	unsigned int count;
+	int ret;
 
 	ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count);
 	if (ret)

drivers/rtc/rtc-rzn1.c

@@ -7,7 +7,7 @@
  * - 2022 Schneider Electric
  *
  * Authors:
- * - Michel Pollet <michel.pollet@bp.renesas.com>, <buserror@gmail.com>
+ * - Michel Pollet <buserror@gmail.com>
  * - Miquel Raynal <miquel.raynal@bootlin.com>
  */
 
@@ -35,13 +35,13 @@
 #define   RZN1_RTC_CTL2_WUST BIT(5)
 #define   RZN1_RTC_CTL2_STOPPED (RZN1_RTC_CTL2_WAIT | RZN1_RTC_CTL2_WST)
 
-#define RZN1_RTC_SEC 0x14
+#define RZN1_RTC_TIME 0x30
-#define RZN1_RTC_MIN 0x18
+#define RZN1_RTC_TIME_MIN_SHIFT 8
-#define RZN1_RTC_HOUR 0x1c
+#define RZN1_RTC_TIME_HOUR_SHIFT 16
-#define RZN1_RTC_WEEK 0x20
+#define RZN1_RTC_CAL 0x34
-#define RZN1_RTC_DAY 0x24
+#define RZN1_RTC_CAL_DAY_SHIFT 8
-#define RZN1_RTC_MONTH 0x28
+#define RZN1_RTC_CAL_MON_SHIFT 16
-#define RZN1_RTC_YEAR 0x2c
+#define RZN1_RTC_CAL_YEAR_SHIFT 24
 
 #define RZN1_RTC_SUBU 0x38
 #define   RZN1_RTC_SUBU_DEV BIT(7)
@@ -52,12 +52,8 @@
 #define RZN1_RTC_ALW 0x48
 
 #define RZN1_RTC_SECC 0x4c
-#define RZN1_RTC_MINC 0x50
+#define RZN1_RTC_TIMEC 0x68
-#define RZN1_RTC_HOURC 0x54
+#define RZN1_RTC_CALC 0x6c
-#define RZN1_RTC_WEEKC 0x58
-#define RZN1_RTC_DAYC 0x5c
-#define RZN1_RTC_MONTHC 0x60
-#define RZN1_RTC_YEARC 0x64
 
 struct rzn1_rtc {
 	struct rtc_device *rtcdev;
@@ -66,26 +62,18 @@ struct rzn1_rtc {
 
 static void rzn1_rtc_get_time_snapshot(struct rzn1_rtc *rtc, struct rtc_time *tm)
 {
-	tm->tm_sec = readl(rtc->base + RZN1_RTC_SECC);
+	u32 val;
-	tm->tm_min = readl(rtc->base + RZN1_RTC_MINC);
-	tm->tm_hour = readl(rtc->base + RZN1_RTC_HOURC);
-	tm->tm_wday = readl(rtc->base + RZN1_RTC_WEEKC);
-	tm->tm_mday = readl(rtc->base + RZN1_RTC_DAYC);
-	tm->tm_mon = readl(rtc->base + RZN1_RTC_MONTHC);
-	tm->tm_year = readl(rtc->base + RZN1_RTC_YEARC);
-}
 
-static unsigned int rzn1_rtc_tm_to_wday(struct rtc_time *tm)
+	val = readl(rtc->base + RZN1_RTC_TIMEC);
-{
+	tm->tm_sec = bcd2bin(val);
-	time64_t time;
+	tm->tm_min = bcd2bin(val >> RZN1_RTC_TIME_MIN_SHIFT);
-	unsigned int days;
+	tm->tm_hour = bcd2bin(val >> RZN1_RTC_TIME_HOUR_SHIFT);
-	u32 secs;
 
-	time = rtc_tm_to_time64(tm);
+	val = readl(rtc->base + RZN1_RTC_CALC);
-	days = div_s64_rem(time, 86400, &secs);
+	tm->tm_wday = val & 0x0f;
-
+	tm->tm_mday = bcd2bin(val >> RZN1_RTC_CAL_DAY_SHIFT);
-	/* day of the week, 1970-01-01 was a Thursday */
+	tm->tm_mon = bcd2bin(val >> RZN1_RTC_CAL_MON_SHIFT) - 1;
-	return (days + 4) % 7;
+	tm->tm_year = bcd2bin(val >> RZN1_RTC_CAL_YEAR_SHIFT) + 100;
 }
 
 static int rzn1_rtc_read_time(struct device *dev, struct rtc_time *tm)
@@ -103,17 +91,9 @@ static int rzn1_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 	rzn1_rtc_get_time_snapshot(rtc, tm);
 	secs = readl(rtc->base + RZN1_RTC_SECC);
-	if (tm->tm_sec != secs)
+	if (tm->tm_sec != bcd2bin(secs))
 		rzn1_rtc_get_time_snapshot(rtc, tm);
 
-	tm->tm_sec = bcd2bin(tm->tm_sec);
-	tm->tm_min = bcd2bin(tm->tm_min);
-	tm->tm_hour = bcd2bin(tm->tm_hour);
-	tm->tm_wday = bcd2bin(tm->tm_wday);
-	tm->tm_mday = bcd2bin(tm->tm_mday);
-	tm->tm_mon = bcd2bin(tm->tm_mon);
-	tm->tm_year = bcd2bin(tm->tm_year);
-
 	return 0;
 }
 
@@ -123,14 +103,6 @@ static int rzn1_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	u32 val;
 	int ret;
 
-	tm->tm_sec = bin2bcd(tm->tm_sec);
-	tm->tm_min = bin2bcd(tm->tm_min);
-	tm->tm_hour = bin2bcd(tm->tm_hour);
-	tm->tm_wday = bin2bcd(rzn1_rtc_tm_to_wday(tm));
-	tm->tm_mday = bin2bcd(tm->tm_mday);
-	tm->tm_mon = bin2bcd(tm->tm_mon);
-	tm->tm_year = bin2bcd(tm->tm_year);
-
 	val = readl(rtc->base + RZN1_RTC_CTL2);
 	if (!(val & RZN1_RTC_CTL2_STOPPED)) {
 		/* Hold the counter if it was counting up */
@@ -144,13 +116,17 @@ static int rzn1_rtc_set_time(struct device *dev, struct rtc_time *tm)
 			return ret;
 	}
 
-	writel(tm->tm_sec, rtc->base + RZN1_RTC_SEC);
+	val = bin2bcd(tm->tm_sec);
-	writel(tm->tm_min, rtc->base + RZN1_RTC_MIN);
+	val |= bin2bcd(tm->tm_min) << RZN1_RTC_TIME_MIN_SHIFT;
-	writel(tm->tm_hour, rtc->base + RZN1_RTC_HOUR);
+	val |= bin2bcd(tm->tm_hour) << RZN1_RTC_TIME_HOUR_SHIFT;
-	writel(tm->tm_wday, rtc->base + RZN1_RTC_WEEK);
+	writel(val, rtc->base + RZN1_RTC_TIME);
-	writel(tm->tm_mday, rtc->base + RZN1_RTC_DAY);
+
-	writel(tm->tm_mon, rtc->base + RZN1_RTC_MONTH);
+	val = tm->tm_wday;
-	writel(tm->tm_year, rtc->base + RZN1_RTC_YEAR);
+	val |= bin2bcd(tm->tm_mday) << RZN1_RTC_CAL_DAY_SHIFT;
+	val |= bin2bcd(tm->tm_mon + 1) << RZN1_RTC_CAL_MON_SHIFT;
+	val |= bin2bcd(tm->tm_year - 100) << RZN1_RTC_CAL_YEAR_SHIFT;
+	writel(val, rtc->base + RZN1_RTC_CAL);
+
 	writel(0, rtc->base + RZN1_RTC_CTL2);
 
 	return 0;
@@ -405,7 +381,7 @@ MODULE_DEVICE_TABLE(of, rzn1_rtc_of_match);
 
 static struct platform_driver rzn1_rtc_driver = {
 	.probe = rzn1_rtc_probe,
-	.remove_new = rzn1_rtc_remove,
+	.remove = rzn1_rtc_remove,
 	.driver = {
 		.name	= "rzn1-rtc",
 		.of_match_table = rzn1_rtc_of_match,
@@ -413,7 +389,7 @@ static struct platform_driver rzn1_rtc_driver = {
 };
 module_platform_driver(rzn1_rtc_driver);
 
-MODULE_AUTHOR("Michel Pollet <Michel.Pollet@bp.renesas.com");
+MODULE_AUTHOR("Michel Pollet <buserror@gmail.com>");
 MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com");
 MODULE_DESCRIPTION("RZ/N1 RTC driver");
 MODULE_LICENSE("GPL");

drivers/rtc/rtc-s3c.c

@@ -597,7 +597,7 @@ MODULE_DEVICE_TABLE(of, s3c_rtc_dt_match);
 
 static struct platform_driver s3c_rtc_driver = {
 	.probe		= s3c_rtc_probe,
-	.remove_new	= s3c_rtc_remove,
+	.remove		= s3c_rtc_remove,
 	.driver		= {
 		.name	= "s3c-rtc",
 		.pm	= &s3c_rtc_pm_ops,

drivers/rtc/rtc-sa1100.c

@@ -341,7 +341,7 @@ MODULE_DEVICE_TABLE(of, sa1100_rtc_dt_ids);
 
 static struct platform_driver sa1100_rtc_driver = {
 	.probe		= sa1100_rtc_probe,
-	.remove_new	= sa1100_rtc_remove,
+	.remove		= sa1100_rtc_remove,
 	.driver		= {
 		.name	= "sa1100-rtc",
 		.pm	= &sa1100_rtc_pm_ops,

drivers/rtc/rtc-sh.c

@@ -678,7 +678,7 @@ static struct platform_driver sh_rtc_platform_driver __refdata = {
 		.pm	= &sh_rtc_pm_ops,
 		.of_match_table = sh_rtc_of_match,
 	},
-	.remove_new	= __exit_p(sh_rtc_remove),
+	.remove		= __exit_p(sh_rtc_remove),
 };
 
 module_platform_driver_probe(sh_rtc_platform_driver, sh_rtc_probe);

drivers/rtc/rtc-spear.c

@@ -475,7 +475,7 @@ MODULE_DEVICE_TABLE(of, spear_rtc_id_table);
 
 static struct platform_driver spear_rtc_driver = {
 	.probe = spear_rtc_probe,
-	.remove_new = spear_rtc_remove,
+	.remove = spear_rtc_remove,
 	.shutdown = spear_rtc_shutdown,
 	.driver = {
 		.name = "rtc-spear",

drivers/rtc/rtc-st-lpc.c

@@ -218,15 +218,14 @@ static int st_rtc_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	ret = devm_request_irq(&pdev->dev, rtc->irq, st_rtc_handler, 0,
+	ret = devm_request_irq(&pdev->dev, rtc->irq, st_rtc_handler,
-			       pdev->name, rtc);
+			       IRQF_NO_AUTOEN, pdev->name, rtc);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq %i\n", rtc->irq);
 		return ret;
 	}
 
 	enable_irq_wake(rtc->irq);
-	disable_irq(rtc->irq);
 
 	rtc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(rtc->clk))

drivers/rtc/rtc-stm32.c

@@ -1287,7 +1287,7 @@ static const struct dev_pm_ops stm32_rtc_pm_ops = {
 
 static struct platform_driver stm32_rtc_driver = {
 	.probe		= stm32_rtc_probe,
-	.remove_new	= stm32_rtc_remove,
+	.remove		= stm32_rtc_remove,
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.pm	= &stm32_rtc_pm_ops,

drivers/rtc/rtc-stmp3xxx.c

@@ -403,7 +403,7 @@ MODULE_DEVICE_TABLE(of, rtc_dt_ids);
 
 static struct platform_driver stmp3xxx_rtcdrv = {
 	.probe		= stmp3xxx_rtc_probe,
-	.remove_new	= stmp3xxx_rtc_remove,
+	.remove		= stmp3xxx_rtc_remove,
 	.driver		= {
 		.name	= "stmp3xxx-rtc",
 		.pm	= &stmp3xxx_rtc_pm_ops,

drivers/rtc/rtc-sunplus.c

@@ -344,7 +344,7 @@ static SIMPLE_DEV_PM_OPS(sp_rtc_pm_ops, sp_rtc_suspend, sp_rtc_resume);
 
 static struct platform_driver sp_rtc_driver = {
 	.probe   = sp_rtc_probe,
-	.remove_new = sp_rtc_remove,
+	.remove = sp_rtc_remove,
 	.driver  = {
 		.name	= "sp7021-rtc",
 		.of_match_table = sp_rtc_of_match,

drivers/rtc/rtc-tegra.c

@@ -399,7 +399,7 @@ static void tegra_rtc_shutdown(struct platform_device *pdev)
 
 static struct platform_driver tegra_rtc_driver = {
 	.probe = tegra_rtc_probe,
-	.remove_new = tegra_rtc_remove,
+	.remove = tegra_rtc_remove,
 	.shutdown = tegra_rtc_shutdown,
 	.driver = {
 		.name = "tegra_rtc",

drivers/rtc/rtc-tps6586x.c

@@ -317,7 +317,7 @@ static struct platform_driver tps6586x_rtc_driver = {
 		.pm	= &tps6586x_pm_ops,
 	},
 	.probe	= tps6586x_rtc_probe,
-	.remove_new = tps6586x_rtc_remove,
+	.remove = tps6586x_rtc_remove,
 };
 module_platform_driver(tps6586x_rtc_driver);
 

drivers/rtc/rtc-twl.c

@@ -673,7 +673,7 @@ MODULE_DEVICE_TABLE(of, twl_rtc_of_match);
 
 static struct platform_driver twl4030rtc_driver = {
 	.probe		= twl_rtc_probe,
-	.remove_new	= twl_rtc_remove,
+	.remove		= twl_rtc_remove,
 	.shutdown	= twl_rtc_shutdown,
 	.driver		= {
 		.name		= "twl_rtc",

drivers/rtc/rtc-vt8500.c

@@ -251,7 +251,7 @@ MODULE_DEVICE_TABLE(of, wmt_dt_ids);
 
 static struct platform_driver vt8500_rtc_driver = {
 	.probe		= vt8500_rtc_probe,
-	.remove_new	= vt8500_rtc_remove,
+	.remove		= vt8500_rtc_remove,
 	.driver		= {
 		.name	= "vt8500-rtc",
 		.of_match_table = wmt_dt_ids,

drivers/rtc/rtc-wm8350.c

@@ -459,7 +459,7 @@ static SIMPLE_DEV_PM_OPS(wm8350_rtc_pm_ops, wm8350_rtc_suspend,
 
 static struct platform_driver wm8350_rtc_driver = {
 	.probe = wm8350_rtc_probe,
-	.remove_new = wm8350_rtc_remove,
+	.remove = wm8350_rtc_remove,
 	.driver = {
 		.name = "wm8350-rtc",
 		.pm = &wm8350_rtc_pm_ops,

drivers/rtc/rtc-xgene.c

@@ -263,7 +263,7 @@ MODULE_DEVICE_TABLE(of, xgene_rtc_of_match);
 
 static struct platform_driver xgene_rtc_driver = {
 	.probe		= xgene_rtc_probe,
-	.remove_new	= xgene_rtc_remove,
+	.remove		= xgene_rtc_remove,
 	.driver		= {
 		.name	= "xgene-rtc",
 		.pm = &xgene_rtc_pm_ops,

drivers/rtc/rtc-zynqmp.c

@@ -382,7 +382,7 @@ MODULE_DEVICE_TABLE(of, xlnx_rtc_of_match);
 
 static struct platform_driver xlnx_rtc_driver = {
 	.probe		= xlnx_rtc_probe,
-	.remove_new	= xlnx_rtc_remove,
+	.remove		= xlnx_rtc_remove,
 	.driver		= {
 		.name	= KBUILD_MODNAME,
 		.pm	= &xlnx_rtc_pm_ops,

include/linux/mfd/88pm886.h

@@ -31,6 +31,15 @@
 #define PM886_INT_WC			BIT(1)
 #define PM886_INT_MASK_MODE		BIT(2)
 
+#define PM886_REG_RTC_CNT1		0xd1
+#define PM886_REG_RTC_CNT2		0xd2
+#define PM886_REG_RTC_CNT3		0xd3
+#define PM886_REG_RTC_CNT4		0xd4
+#define PM886_REG_RTC_SPARE1		0xea
+#define PM886_REG_RTC_SPARE2		0xeb
+#define PM886_REG_RTC_SPARE3		0xec
+#define PM886_REG_RTC_SPARE4		0xed
+#define PM886_REG_RTC_SPARE5		0xee
 #define PM886_REG_RTC_SPARE6		0xef
 
 #define PM886_REG_BUCK_EN		0x08

include/linux/rtc/m48t59.h

@@ -56,6 +56,9 @@ struct m48t59_plat_data {
 	void __iomem *ioaddr;
 	/* offset to RTC registers, automatically set according to the type */
 	unsigned int offset;
+
+	/* YY digits (in RTC) are offset, i.e. year is 1900 + yy_offset + YY */
+	int yy_offset;
 };
 
 #endif /* _LINUX_RTC_M48T59_H_ */