Kernel/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2025-01-06 05:06:29 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

serial: 8250_of: Switch to use uart_read_port_properties()

Browse Source 
Since we have now a common helper to read port properties
use it instead of sparse home grown solution.

Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240304123035.758700-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Andy Shevchenko 2024-03-04 14:27:11 +02:00 committed by Greg Kroah-Hartman
parent 0087b9e694
commit 1117a6fdc7
1 changed files with 22 additions and 83 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

105
drivers/tty/serial/8250/8250_of.c
View File

@ -69,37 +69,22 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
struct device *dev = &ofdev->dev;
struct device_node *np = dev->of_node;
struct uart_port *port = &up->port;
u32 clk, spd, prop;
int ret, irq;
u32 spd;
int ret;
memset(port, 0, sizeof *port);
pm_runtime_enable(&ofdev->dev);
pm_runtime_get_sync(&ofdev->dev);
if (of_property_read_u32(np, "clock-frequency", &clk)) {
/* Get clk rate through clk driver if present */
info->clk = devm_clk_get_enabled(dev, NULL);
if (IS_ERR(info->clk)) {
ret = dev_err_probe(dev, PTR_ERR(info->clk), "failed to get clock\n");
goto err_pmruntime;
}
clk = clk_get_rate(info->clk);
}
/* If current-speed was set, then try not to change it. */
if (of_property_read_u32(np, "current-speed", &spd) == 0)
port->custom_divisor = clk / (16 * spd);
ret = of_address_to_resource(np, 0, &resource);
if (ret) {
dev_err_probe(dev, ret, "invalid address\n");
goto err_pmruntime;
}
port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT |
UPF_FIXED_TYPE;
port->dev = &ofdev->dev;
port->flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_FIXED_TYPE;
spin_lock_init(&port->lock);
if (resource_type(&resource) == IORESOURCE_IO) {
@ -108,70 +93,31 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
} else {
port->mapbase = resource.start;
port->mapsize = resource_size(&resource);
/* Check for shifted address mapping */
if (of_property_read_u32(np, "reg-offset", &prop) == 0) {
if (prop >= port->mapsize) {
ret = dev_err_probe(dev, -EINVAL, "reg-offset %u exceeds region size %pa\n",
prop, &port->mapsize);
goto err_pmruntime;
}
port->mapbase += prop;
port->mapsize -= prop;
}
port->iotype = UPIO_MEM;
if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
switch (prop) {
case 1:
port->iotype = UPIO_MEM;
break;
case 2:
port->iotype = UPIO_MEM16;
break;
case 4:
port->iotype = of_device_is_big_endian(np) ?
UPIO_MEM32BE : UPIO_MEM32;
break;
default:
ret = dev_err_probe(dev, -EINVAL, "unsupported reg-io-width (%u)\n",
prop);
goto err_pmruntime;
}
}
port->flags |= UPF_IOREMAP;
}
ret = uart_read_and_validate_port_properties(port);
if (ret)
goto err_pmruntime;
/* Get clk rate through clk driver if present */
if (!port->uartclk) {
info->clk = devm_clk_get_enabled(dev, NULL);
if (IS_ERR(info->clk)) {
ret = dev_err_probe(dev, PTR_ERR(info->clk), "failed to get clock\n");
goto err_pmruntime;
}
port->uartclk = clk_get_rate(info->clk);
}
/* If current-speed was set, then try not to change it. */
if (of_property_read_u32(np, "current-speed", &spd) == 0)
port->custom_divisor = port->uartclk / (16 * spd);
/* Compatibility with the deprecated pxa driver and 8250_pxa drivers. */
if (of_device_is_compatible(np, "mrvl,mmp-uart"))
port->regshift = 2;
/* Check for registers offset within the devices address range */
if (of_property_read_u32(np, "reg-shift", &prop) == 0)
port->regshift = prop;
/* Check for fifo size */
if (of_property_read_u32(np, "fifo-size", &prop) == 0)
port->fifosize = prop;
/* Check for a fixed line number */
ret = of_alias_get_id(np, "serial");
if (ret >= 0)
port->line = ret;
irq = of_irq_get(np, 0);
if (irq < 0) {
if (irq == -EPROBE_DEFER) {
ret = -EPROBE_DEFER;
goto err_pmruntime;
}
/* IRQ support not mandatory */
irq = 0;
}
port->irq = irq;
info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
if (IS_ERR(info->rst)) {
ret = PTR_ERR(info->rst);
@ -183,12 +129,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
goto err_pmruntime;
port->type = type;
port->uartclk = clk;
if (of_property_read_bool(np, "no-loopback-test"))
port->flags |= UPF_SKIP_TEST;
port->dev = &ofdev->dev;
port->rs485_config = serial8250_em485_config;
port->rs485_supported = serial8250_em485_supported;
up->rs485_start_tx = serial8250_em485_start_tx;
@ -280,7 +220,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
platform_set_drvdata(ofdev, info);
return 0;
err_dispose:
irq_dispose_mapping(port8250.port.irq);
pm_runtime_put_sync(&ofdev->dev);
pm_runtime_disable(&ofdev->dev);
err_free: