Kernel/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-12-29 09:16:33 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Char/Misc driver fixes for 6.10-rc4

Browse Source 
Here are a number of small char/misc and iio driver fixes for 6.10-rc4.
 Included in here are the following:
   - iio driver fixes for a bunch of reported problems.
   - mei driver fixes for a number of reported issues.
   - amiga parport driver build fix.
   - .editorconfig fix that was causing lots of unintended whitespace
     changes to happen to files when they were being edited.  Unless we
     want to sweep the whole tree and remove all trailing whitespace at
     once, this is needed for the .editorconfig file to be able to be
     used at all.  This change is required because the original
     submitters never touched older files in the tree.
   - jfs bugfix for a buffer overflow
 
 The jfs bugfix is in here as I didn't know where else to put it, and
 it's been ignored for a while as the filesystem seems to be abandoned
 and I'm tired of seeing the same issue reported in multiple places.
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZm7C7A8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymdEACfcZAcnD6Z7WAcTJ7GfFfNT9ph0+EAnAtQUO8j
 CxuaurBncWfcNeHkaYbB
 =Px6n
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are a number of small char/misc and iio driver fixes for
  6.10-rc4. Included in here are the following:

   - iio driver fixes for a bunch of reported problems.

   - mei driver fixes for a number of reported issues.

   - amiga parport driver build fix.

   - .editorconfig fix that was causing lots of unintended whitespace
     changes to happen to files when they were being edited. Unless we
     want to sweep the whole tree and remove all trailing whitespace at
     once, this is needed for the .editorconfig file to be able to be
     used at all. This change is required because the original
     submitters never touched older files in the tree.

   - jfs bugfix for a buffer overflow

  The jfs bugfix is in here as I didn't know where else to put it, and
  it's been ignored for a while as the filesystem seems to be abandoned
  and I'm tired of seeing the same issue reported in multiple places.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (25 commits)
  .editorconfig: remove trim_trailing_whitespace option
  jfs: xattr: fix buffer overflow for invalid xattr
  misc: microchip: pci1xxxx: Fix a memory leak in the error handling of gp_aux_bus_probe()
  misc: microchip: pci1xxxx: fix double free in the error handling of gp_aux_bus_probe()
  parport: amiga: Mark driver struct with __refdata to prevent section mismatch
  mei: vsc: Fix wrong invocation of ACPI SID method
  mei: vsc: Don't stop/restart mei device during system suspend/resume
  mei: me: release irq in mei_me_pci_resume error path
  mei: demote client disconnect warning on suspend to debug
  iio: inkern: fix channel read regression
  iio: imu: inv_mpu6050: stabilized timestamping in interrupt
  iio: adc: ad7173: Fix sampling frequency setting
  iio: adc: ad7173: Clear append status bit
  iio: imu: inv_icm42600: delete unneeded update watermark call
  iio: imu: inv_icm42600: stabilized timestamp in interrupt
  iio: invensense: fix odr switching to same value
  iio: adc: ad7173: Remove index from temp channel
  iio: adc: ad7173: Add ad7173_device_info names
  iio: adc: ad7173: fix buffers enablement for ad7176-2
  iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe()
  ...
This commit is contained in:
Linus Torvalds 2024-06-16 10:29:37 -07:00
commit 33f855cbb7
24 changed files with 100 additions and 80 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
.editorconfig
View File

@ -5,7 +5,6 @@ root = true
[{*.{awk,c,dts,dtsi,dtso,h,mk,s,S},Kconfig,Makefile,Makefile.*}]
charset = utf-8
end_of_line = lf
trim_trailing_whitespace = true
insert_final_newline = true
indent_style = tab
indent_size = 8
@ -13,7 +12,6 @@ indent_size = 8
[*.{json,py,rs}]
charset = utf-8
end_of_line = lf
trim_trailing_whitespace = true
insert_final_newline = true
indent_style = space
indent_size = 4
@ -26,7 +24,6 @@ indent_size = 8
[*.yaml]
charset = utf-8
end_of_line = lf
trim_trailing_whitespace = unset
insert_final_newline = true
indent_style = space
indent_size = 2

2
Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
View File

@ -139,7 +139,7 @@ allOf:
Voltage output range of the channel as <minimum, maximum>
Required connections:
Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V;
Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V;
Rfb2x for: 0 to 10 V; -2.5 to 7.5V; -5 to 5 V;
oneOf:
- items:
- const: 0

37
drivers/iio/adc/ad7173.c
View File

@ -145,6 +145,7 @@ struct ad7173_device_info {
unsigned int id;
char *name;
bool has_temp;
bool has_input_buf;
bool has_int_ref;
bool has_ref2;
u8 num_gpios;
@ -212,18 +213,21 @@ static const struct ad7173_device_info ad7173_device_info[] = {
.num_configs = 4,
.num_gpios = 2,
.has_temp = true,
.has_input_buf = true,
.has_int_ref = true,
.clock = 2 * HZ_PER_MHZ,
.sinc5_data_rates = ad7173_sinc5_data_rates,
.num_sinc5_data_rates = ARRAY_SIZE(ad7173_sinc5_data_rates),
},
[ID_AD7172_4] = {
.name = "ad7172-4",
.id = AD7172_4_ID,
.num_inputs = 9,
.num_channels = 8,
.num_configs = 8,
.num_gpios = 4,
.has_temp = false,
.has_input_buf = true,
.has_ref2 = true,
.clock = 2 * HZ_PER_MHZ,
.sinc5_data_rates = ad7173_sinc5_data_rates,
@ -237,6 +241,7 @@ static const struct ad7173_device_info ad7173_device_info[] = {
.num_configs = 8,
.num_gpios = 4,
.has_temp = true,
.has_input_buf = true,
.has_int_ref = true,
.has_ref2 = true,
.clock = 2 * HZ_PER_MHZ,
@ -251,18 +256,21 @@ static const struct ad7173_device_info ad7173_device_info[] = {
.num_configs = 4,
.num_gpios = 2,
.has_temp = true,
.has_input_buf = true,
.has_int_ref = true,
.clock = 16 * HZ_PER_MHZ,
.sinc5_data_rates = ad7175_sinc5_data_rates,
.num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates),
},
[ID_AD7175_8] = {
.name = "ad7175-8",
.id = AD7175_8_ID,
.num_inputs = 17,
.num_channels = 16,
.num_configs = 8,
.num_gpios = 4,
.has_temp = true,
.has_input_buf = true,
.has_int_ref = true,
.has_ref2 = true,
.clock = 16 * HZ_PER_MHZ,
@ -277,18 +285,21 @@ static const struct ad7173_device_info ad7173_device_info[] = {
.num_configs = 4,
.num_gpios = 2,
.has_temp = false,
.has_input_buf = false,
.has_int_ref = true,
.clock = 16 * HZ_PER_MHZ,
.sinc5_data_rates = ad7175_sinc5_data_rates,
.num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates),
},
[ID_AD7177_2] = {
.name = "ad7177-2",
.id = AD7177_ID,
.num_inputs = 5,
.num_channels = 4,
.num_configs = 4,
.num_gpios = 2,
.has_temp = true,
.has_input_buf = true,
.has_int_ref = true,
.clock = 16 * HZ_PER_MHZ,
.odr_start_value = AD7177_ODR_START_VALUE,
@ -532,6 +543,7 @@ static int ad7173_append_status(struct ad_sigma_delta *sd, bool append)
unsigned int interface_mode = st->interface_mode;
int ret;
interface_mode &= ~AD7173_INTERFACE_DATA_STAT;
interface_mode |= AD7173_INTERFACE_DATA_STAT_EN(append);
ret = ad_sd_write_reg(&st->sd, AD7173_REG_INTERFACE_MODE, 2, interface_mode);
if (ret)
@ -705,7 +717,7 @@ static int ad7173_write_raw(struct iio_dev *indio_dev,
{
struct ad7173_state *st = iio_priv(indio_dev);
struct ad7173_channel_config *cfg;
unsigned int freq, i, reg;
unsigned int freq, i;
int ret;
ret = iio_device_claim_direct_mode(indio_dev);
@ -721,16 +733,7 @@ static int ad7173_write_raw(struct iio_dev *indio_dev,
cfg = &st->channels[chan->address].cfg;
cfg->odr = i;
if (!cfg->live)
break;
ret = ad_sd_read_reg(&st->sd, AD7173_REG_FILTER(cfg->cfg_slot), 2, &reg);
if (ret)
break;
reg &= ~AD7173_FILTER_ODR0_MASK;
reg |= FIELD_PREP(AD7173_FILTER_ODR0_MASK, i);
ret = ad_sd_write_reg(&st->sd, AD7173_REG_FILTER(cfg->cfg_slot), 2, reg);
cfg->live = false;
break;
default:
@ -792,8 +795,7 @@ static const struct iio_chan_spec ad7173_channel_template = {
.type = IIO_VOLTAGE,
.indexed = 1,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE),
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
.scan_type = {
.sign = 'u',
.realbits = 24,
@ -804,12 +806,11 @@ static const struct iio_chan_spec ad7173_channel_template = {
static const struct iio_chan_spec ad7173_temp_iio_channel_template = {
.type = IIO_TEMP,
.indexed = 1,
.channel = AD7173_AIN_TEMP_POS,
.channel2 = AD7173_AIN_TEMP_NEG,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET),
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SAMP_FREQ),
.scan_type = {
.sign = 'u',
.realbits = 24,
@ -932,7 +933,7 @@ static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev)
AD7173_CH_ADDRESS(chan_arr[chan_index].channel,
chan_arr[chan_index].channel2);
chan_st_priv->cfg.bipolar = false;
chan_st_priv->cfg.input_buf = true;
chan_st_priv->cfg.input_buf = st->info->has_input_buf;
chan_st_priv->cfg.ref_sel = AD7173_SETUP_REF_SEL_INT_REF;
st->adc_mode |= AD7173_ADC_MODE_REF_EN;
@ -989,7 +990,7 @@ static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev)
chan_st_priv->ain = AD7173_CH_ADDRESS(ain[0], ain[1]);
chan_st_priv->chan_reg = chan_index;
chan_st_priv->cfg.input_buf = true;
chan_st_priv->cfg.input_buf = st->info->has_input_buf;
chan_st_priv->cfg.odr = 0;
chan_st_priv->cfg.bipolar = fwnode_property_read_bool(child, "bipolar");

4
drivers/iio/adc/ad9467.c
View File

@ -243,11 +243,11 @@ static void __ad9467_get_scale(struct ad9467_state *st, int index,
}
static const struct iio_chan_spec ad9434_channels[] = {
AD9467_CHAN(0, 0, 12, 'S'),
AD9467_CHAN(0, 0, 12, 's'),
};
static const struct iio_chan_spec ad9467_channels[] = {
AD9467_CHAN(0, 0, 16, 'S'),
AD9467_CHAN(0, 0, 16, 's'),
};
static const struct ad9467_chip_info ad9467_chip_tbl = {

6
drivers/iio/common/inv_sensors/inv_sensors_timestamp.c
View File

@ -60,11 +60,15 @@ EXPORT_SYMBOL_NS_GPL(inv_sensors_timestamp_init, IIO_INV_SENSORS_TIMESTAMP);
int inv_sensors_timestamp_update_odr(struct inv_sensors_timestamp *ts,
uint32_t period, bool fifo)
{
uint32_t mult;
/* when FIFO is on, prevent odr change if one is already pending */
if (fifo && ts->new_mult != 0)
return -EAGAIN;
ts->new_mult = period / ts->chip.clock_period;
mult = period / ts->chip.clock_period;
if (mult != ts->mult)
ts->new_mult = mult;
return 0;
}

2
drivers/iio/dac/ad5592r-base.c
View File

@ -415,7 +415,7 @@ static int ad5592r_read_raw(struct iio_dev *iio_dev,
s64 tmp = *val * (3767897513LL / 25LL);
*val = div_s64_rem(tmp, 1000000000LL, val2);
return IIO_VAL_INT_PLUS_MICRO;
return IIO_VAL_INT_PLUS_NANO;
}
mutex_lock(&st->lock);

5
drivers/iio/imu/bmi323/bmi323_core.c
View File

@ -1391,7 +1391,7 @@ static irqreturn_t bmi323_trigger_handler(int irq, void *p)
&data->buffer.channels,
ARRAY_SIZE(data->buffer.channels));
if (ret)
return IRQ_NONE;
goto out;
} else {
for_each_set_bit(bit, indio_dev->active_scan_mask,
BMI323_CHAN_MAX) {
@ -1400,13 +1400,14 @@ static irqreturn_t bmi323_trigger_handler(int irq, void *p)
&data->buffer.channels[index++],
BMI323_BYTES_PER_SAMPLE);
if (ret)
return IRQ_NONE;
goto out;
}
}
iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer,
iio_get_time_ns(indio_dev));
out:
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;

4
drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
View File

@ -130,10 +130,6 @@ static int inv_icm42600_accel_update_scan_mode(struct iio_dev *indio_dev,
/* update data FIFO write */
inv_sensors_timestamp_apply_odr(ts, 0, 0, 0);
ret = inv_icm42600_buffer_set_fifo_en(st, fifo_en | st->fifo.en);
if (ret)
goto out_unlock;
ret = inv_icm42600_buffer_update_watermark(st);
out_unlock:
mutex_unlock(&st->lock);

19
drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c
View File

@ -222,10 +222,15 @@ int inv_icm42600_buffer_update_watermark(struct inv_icm42600_state *st)
latency_accel = period_accel * wm_accel;
/* 0 value for watermark means that the sensor is turned off */
if (wm_gyro == 0 && wm_accel == 0)
return 0;
if (latency_gyro == 0) {
watermark = wm_accel;
st->fifo.watermark.eff_accel = wm_accel;
} else if (latency_accel == 0) {
watermark = wm_gyro;
st->fifo.watermark.eff_gyro = wm_gyro;
} else {
/* compute the smallest latency that is a multiple of both */
if (latency_gyro <= latency_accel)
@ -241,6 +246,13 @@ int inv_icm42600_buffer_update_watermark(struct inv_icm42600_state *st)
watermark = latency / period;
if (watermark < 1)
watermark = 1;
/* update effective watermark */
st->fifo.watermark.eff_gyro = latency / period_gyro;
if (st->fifo.watermark.eff_gyro < 1)
st->fifo.watermark.eff_gyro = 1;
st->fifo.watermark.eff_accel = latency / period_accel;
if (st->fifo.watermark.eff_accel < 1)
st->fifo.watermark.eff_accel = 1;
}
/* compute watermark value in bytes */
@ -514,7 +526,7 @@ int inv_icm42600_buffer_fifo_parse(struct inv_icm42600_state *st)
/* handle gyroscope timestamp and FIFO data parsing */
if (st->fifo.nb.gyro > 0) {
ts = &gyro_st->ts;
inv_sensors_timestamp_interrupt(ts, st->fifo.nb.gyro,
inv_sensors_timestamp_interrupt(ts, st->fifo.watermark.eff_gyro,
st->timestamp.gyro);
ret = inv_icm42600_gyro_parse_fifo(st->indio_gyro);
if (ret)
@ -524,7 +536,7 @@ int inv_icm42600_buffer_fifo_parse(struct inv_icm42600_state *st)
/* handle accelerometer timestamp and FIFO data parsing */
if (st->fifo.nb.accel > 0) {
ts = &accel_st->ts;
inv_sensors_timestamp_interrupt(ts, st->fifo.nb.accel,
inv_sensors_timestamp_interrupt(ts, st->fifo.watermark.eff_accel,
st->timestamp.accel);
ret = inv_icm42600_accel_parse_fifo(st->indio_accel);
if (ret)
@ -577,6 +589,9 @@ int inv_icm42600_buffer_init(struct inv_icm42600_state *st)
unsigned int val;
int ret;
st->fifo.watermark.eff_gyro = 1;
st->fifo.watermark.eff_accel = 1;
/*
* Default FIFO configuration (bits 7 to 5)
* - use invalid value

2
drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.h
View File

@ -32,6 +32,8 @@ struct inv_icm42600_fifo {
struct {
unsigned int gyro;
unsigned int accel;
unsigned int eff_gyro;
unsigned int eff_accel;
} watermark;
size_t count;
struct {

1
drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
View File

@ -537,6 +537,7 @@ static int inv_icm42600_irq_init(struct inv_icm42600_state *st, int irq,
if (ret)
return ret;
irq_type |= IRQF_ONESHOT;
return devm_request_threaded_irq(dev, irq, inv_icm42600_irq_timestamp,
inv_icm42600_irq_handler, irq_type,
"inv_icm42600", st);

4
drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c
View File

@ -130,10 +130,6 @@ static int inv_icm42600_gyro_update_scan_mode(struct iio_dev *indio_dev,
/* update data FIFO write */
inv_sensors_timestamp_apply_odr(ts, 0, 0, 0);
ret = inv_icm42600_buffer_set_fifo_en(st, fifo_en | st->fifo.en);
if (ret)
goto out_unlock;
ret = inv_icm42600_buffer_update_watermark(st);
out_unlock:
mutex_unlock(&st->lock);

4
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
View File

@ -100,8 +100,8 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
goto end_session;
/* Each FIFO data contains all sensors, so same number for FIFO and sensor data */
fifo_period = NSEC_PER_SEC / INV_MPU6050_DIVIDER_TO_FIFO_RATE(st->chip_config.divider);
inv_sensors_timestamp_interrupt(&st->timestamp, nb, pf->timestamp);
inv_sensors_timestamp_apply_odr(&st->timestamp, fifo_period, nb, 0);
inv_sensors_timestamp_interrupt(&st->timestamp, 1, pf->timestamp);
inv_sensors_timestamp_apply_odr(&st->timestamp, fifo_period, 1, 0);
/* clear internal data buffer for avoiding kernel data leak */
memset(data, 0, sizeof(data));

1
drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
View File

@ -300,6 +300,7 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type)
if (!st->trig)
return -ENOMEM;
irq_type |= IRQF_ONESHOT;
ret = devm_request_threaded_irq(&indio_dev->dev, st->irq,
&inv_mpu6050_interrupt_timestamp,
&inv_mpu6050_interrupt_handle,

2
drivers/iio/inkern.c
View File

@ -721,7 +721,7 @@ int iio_read_channel_processed_scale(struct iio_channel *chan, int *val,
return ret;
*val *= scale;
return 0;
return ret;
} else {
ret = iio_channel_read(chan, val, NULL, IIO_CHAN_INFO_RAW);
if (ret < 0)

10
drivers/iio/pressure/bmp280-core.c
View File

@ -1394,12 +1394,12 @@ static int bmp580_read_temp(struct bmp280_data *data, int *val, int *val2)
/*
* Temperature is returned in Celsius degrees in fractional
* form down 2^16. We rescale by x1000 to return milli Celsius
* to respect IIO ABI.
* form down 2^16. We rescale by x1000 to return millidegrees
* Celsius to respect IIO ABI.
*/
*val = raw_temp * 1000;
*val2 = 16;
return IIO_VAL_FRACTIONAL_LOG2;
raw_temp = sign_extend32(raw_temp, 23);
*val = ((s64)raw_temp * 1000) / (1 << 16);
return IIO_VAL_INT;
}
static int bmp580_read_press(struct bmp280_data *data, int *val, int *val2)

6
drivers/iio/temperature/mlx90635.c
View File

@ -947,9 +947,9 @@ static int mlx90635_probe(struct i2c_client *client)
"failed to allocate regmap\n");
regmap_ee = devm_regmap_init_i2c(client, &mlx90635_regmap_ee);
if (IS_ERR(regmap))
return dev_err_probe(&client->dev, PTR_ERR(regmap),
"failed to allocate regmap\n");
if (IS_ERR(regmap_ee))
return dev_err_probe(&client->dev, PTR_ERR(regmap_ee),
"failed to allocate EEPROM regmap\n");
mlx90635 = iio_priv(indio_dev);
i2c_set_clientdata(client, indio_dev);

9
drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c
View File

@ -69,8 +69,10 @@ static int gp_aux_bus_probe(struct pci_dev *pdev, const struct pci_device_id *id
aux_bus->aux_device_wrapper[1] = kzalloc(sizeof(*aux_bus->aux_device_wrapper[1]),
GFP_KERNEL);
if (!aux_bus->aux_device_wrapper[1])
return -ENOMEM;
if (!aux_bus->aux_device_wrapper[1]) {
retval = -ENOMEM;
goto err_aux_dev_add_0;
}
retval = ida_alloc(&gp_client_ida, GFP_KERNEL);
if (retval < 0)
@ -111,6 +113,7 @@ static int gp_aux_bus_probe(struct pci_dev *pdev, const struct pci_device_id *id
err_aux_dev_add_1:
auxiliary_device_uninit(&aux_bus->aux_device_wrapper[1]->aux_dev);
goto err_aux_dev_add_0;
err_aux_dev_init_1:
ida_free(&gp_client_ida, aux_bus->aux_device_wrapper[1]->aux_dev.id);
@ -120,6 +123,7 @@ static int gp_aux_bus_probe(struct pci_dev *pdev, const struct pci_device_id *id
err_aux_dev_add_0:
auxiliary_device_uninit(&aux_bus->aux_device_wrapper[0]->aux_dev);
goto err_ret;
err_aux_dev_init_0:
ida_free(&gp_client_ida, aux_bus->aux_device_wrapper[0]->aux_dev.id);
@ -127,6 +131,7 @@ static int gp_aux_bus_probe(struct pci_dev *pdev, const struct pci_device_id *id
err_ida_alloc_0:
kfree(aux_bus->aux_device_wrapper[0]);
err_ret:
return retval;
}

2
drivers/misc/mei/main.c
View File

@ -329,7 +329,7 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf,
}
if (!mei_cl_is_connected(cl)) {
cl_err(dev, cl, "is not connected");
cl_dbg(dev, cl, "is not connected");
rets = -ENODEV;
goto out;
}

4
drivers/misc/mei/pci-me.c
View File

@ -385,8 +385,10 @@ static int mei_me_pci_resume(struct device *device)
}
err = mei_restart(dev);
if (err)
if (err) {
free_irq(pdev->irq, dev);
return err;
}
/* Start timer if stopped in suspend */
schedule_delayed_work(&dev->timer_work, HZ);

39
drivers/misc/mei/platform-vsc.c
View File

@ -399,41 +399,32 @@ static void mei_vsc_remove(struct platform_device *pdev)
static int mei_vsc_suspend(struct device *dev)
{
struct mei_device *mei_dev = dev_get_drvdata(dev);
struct mei_vsc_hw *hw = mei_dev_to_vsc_hw(mei_dev);
struct mei_device *mei_dev;
int ret = 0;
mei_stop(mei_dev);
mei_dev = dev_get_drvdata(dev);
if (!mei_dev)
return -ENODEV;
mei_disable_interrupts(mei_dev);
mutex_lock(&mei_dev->device_lock);
vsc_tp_free_irq(hw->tp);
if (!mei_write_is_idle(mei_dev))
ret = -EAGAIN;
return 0;
mutex_unlock(&mei_dev->device_lock);
return ret;
}
static int mei_vsc_resume(struct device *dev)
{
struct mei_device *mei_dev = dev_get_drvdata(dev);
struct mei_vsc_hw *hw = mei_dev_to_vsc_hw(mei_dev);
int ret;
struct mei_device *mei_dev;
ret = vsc_tp_request_irq(hw->tp);
if (ret)
return ret;
ret = mei_restart(mei_dev);
if (ret)
goto err_free;
/* start timer if stopped in suspend */
schedule_delayed_work(&mei_dev->timer_work, HZ);
mei_dev = dev_get_drvdata(dev);
if (!mei_dev)
return -ENODEV;
return 0;
err_free:
vsc_tp_free_irq(hw->tp);
return ret;
}
static DEFINE_SIMPLE_DEV_PM_OPS(mei_vsc_pm_ops, mei_vsc_suspend, mei_vsc_resume);

2
drivers/misc/mei/vsc-fw-loader.c
View File

@ -252,7 +252,7 @@ static int vsc_get_sensor_name(struct vsc_fw_loader *fw_loader,
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER };
union acpi_object obj = {
.type = ACPI_TYPE_INTEGER,
.integer.type = ACPI_TYPE_INTEGER,
.integer.value = 1,
};
struct acpi_object_list arg_list = {

8
drivers/parport/parport_amiga.c
View File

@ -229,7 +229,13 @@ static void __exit amiga_parallel_remove(struct platform_device *pdev)
parport_put_port(port);
}
static struct platform_driver amiga_parallel_driver = {
/*
* amiga_parallel_remove() lives in .exit.text. For drivers registered via
* module_platform_driver_probe() this is ok because they cannot get unbound at
* runtime. So mark the driver struct with __refdata to prevent modpost
* triggering a section mismatch warning.
*/
static struct platform_driver amiga_parallel_driver __refdata = {
.remove_new = __exit_p(amiga_parallel_remove),
.driver = {
.name = "amiga-parallel",

4
fs/jfs/xattr.c
View File

@ -557,9 +557,11 @@ static int ea_get(struct inode *inode, struct ea_buffer *ea_buf, int min_size)
size_check:
if (EALIST_SIZE(ea_buf->xattr) != ea_size) {
int size = min_t(int, EALIST_SIZE(ea_buf->xattr), ea_size);
printk(KERN_ERR "ea_get: invalid extended attribute\n");
print_hex_dump(KERN_ERR, "", DUMP_PREFIX_ADDRESS, 16, 1,
ea_buf->xattr, ea_size, 1);
ea_buf->xattr, size, 1);
ea_release(inode, ea_buf);
rc = -EIO;
goto clean_up;