Allwinner Device Tree changes for 6.13 part 2

- Remove accidental suniv duplicates in Makefile
 - Add second source magnetometer for Pine Phone
 - Add orientation (mount matrix) for Pine Phone's accelerometer and
   magnetometer
 - Enable eMMC and MMC on A100 Perf1
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAmcwtssOHHdlbnNAY3Np
 ZS5vcmcACgkQOJpUIZwPJDC+zA/9F1YbB88RHtaLKwN/WLQZ3vkQxADhulsixI8X
 BHQATpsI477csCxjFJre5VPCDT8w77Dy4v0NHzIfZ/vB74wcTsBXoaW7jsSS9SQs
 V7Z9kf33loRaeY9OUgaJNZLBP0vPCt4GZBlW6VdMsJtID5ZMO0Gl42bFrL+QI8Oo
 4ZnINz+gcTZtJFU6h+ZTiCzqGe13NJTD/Q8g/yEjMc38tyvVf3t/IhUyZBHCDHs+
 G4Fs0aIpLYbicecRfk4sNTla2vsAezzkyaCu+Kq/W5dWy2vxKKIyarYMNmTmUJfH
 zed8oRKqqYedAI/1THMhNMTVm1Zr5FluhYBAkbGGVQNeLldBv+5P6Lte4pAUGIFJ
 Gmg0hWDW2KkIpmAmyVMAKgLtSQXLrwPS5Cls6doDk+6dJBh9unPKgl7CUFGnkJo6
 giZSvUi10CKCCf2SEG7KQyHb/dOCwquQf2TMVQvglMbxK4cfdvdryaN4/9z318aE
 eMQbN9MNpFsLUGtfDMjQJ2cOQBhAGsQROJOwLpjf3cBXl62RXx2iQK2e/DIm6sU0
 ElFAAxN7ciq7YlMFZDteEsrAKv9uTsqU7oqxVJFJbwRMhC/hPpknMIsPAzmQSfPx
 WgM1xVUeECDF9suhWAHBWVXi4gY3fTUxUk0UgkRrpPwfAmcECyGqVLU0JOKwowGP
 4/xFtBs=
 =vpQK
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczz24ACgkQYKtH/8kJ
 Uie1ng/+MJ9Uwv80VTf/qSmm2706bDiDg8A7r1lMeSTD/o57rcg6sfUjHUfLfbRb
 9LWIxOPFgqh+9J3NsivlMC2s3aIGqCJIXzC/0AXgfmwnE5/fKac7gZgctbZRRbJD
 3Uz403tcmRgTHrNpOEg74Yak0HC61gQeR7AtqeuvDz2KbMCvUR3qbpOZ2EqChxxv
 JDGBXVgrke3x6Cexawsf+DX/lBt5A+MMuPPNRdUS9ZIem5T/l0QjboLJU0lHt8MW
 BSfCeZx4SrigHwhHqJxYjVs9KhNIS/se7/QQ0Huw3rBKq/rN+506KduwZ1+r2P5n
 x5TrUt12kzsYPIyruXNBOQLo7fwgQ5dxxiphCMoagVA7CwT1ggnGmuoEEQeWW1KB
 e8gCb2WajgQmNzk9Gd3fG/cr8OjxMI9c5YEu/dy8Gy0UFzh2XD5q8Z2mEDPx01JI
 L8hpaMsRHntoKHK5nWeEsG9q+PcNMgGco7UOC0wpdlxbZwAJP8Q5eRzt9GglMIoX
 6TbAoiEA7rXI04ijkCAJ7pL6cCEbSIt1QY5eIKIohZYhj27sKvVkT/Kt9VIghoy6
 +GqzstDCf6Stf7erlV7Vfp2bwYefxiQtxA099XDaB16hHO3UfCwxnv+wG4cVCFL2
 EmVTsALzS5c+WGoUAcXitCoWhD5VAPGVbCrGRFvu5rraW/wNFpw=
 =4WAW
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-dt-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

Allwinner Device Tree changes for 6.13 part 2

- Remove accidental suniv duplicates in Makefile
- Add second source magnetometer for Pine Phone
- Add orientation (mount matrix) for Pine Phone's accelerometer and
  magnetometer
- Enable eMMC and MMC on A100 Perf1

* tag 'sunxi-dt-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
  arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
  arm64: dts: sun50i-a64-pinephone: Add mount-matrix for PinePhone magnetometers
  arm64: dts: sun50i-a64-pinephone: Add AF8133J to PinePhone
  ARM: dts: allwinner: Remove accidental suniv duplicates
  arm64: allwinner: a100: Add MMC related nodes
  arm64: dts: allwinner: a100: add usb related nodes
  dt-bindings: usb: sunxi-musb: Add A100 compatible string
  dt-bindings: usb: Add A100 compatible string
  dt-bindings: phy: sun50i-a64: add a100 compatible
  arm64: dts: allwinner: a100: add watchdog node
  arm64: dts: allwinner: A100: Add PMU mode
  ARM: dts: sunxi: add support for RerVision A33-Vstar board
  dt-bindings: arm: sunxi: document RerVision A33-Vstar board
  arm64: dts: allwinner: Add disable-wp for boards with micro SD card
  arm64: dts: allwinner: h313/h616/h618/h700: Enable audio codec for all supported boards
  arm64: dts: allwinner: h616: Add audio codec node

Link: https://lore.kernel.org/r/ZzC-OF57MT_yCeWH@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/sunxi.yaml

@@ -846,6 +846,12 @@ properties:
           - const: allwinner,sun50i-h64
           - const: allwinner,sun50i-a64
 
+      - description: RerVision A33-Vstar (with A33-Core1 SoM)
+        items:
+          - const: rervision,a33-vstar
+          - const: rervision,a33-core1
+          - const: allwinner,sun8i-a33
+
       - description: RerVision H3-DVK
         items:
           - const: rervision,h3-dvk

Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml

@@ -15,9 +15,13 @@ properties:
     const: 1
 
   compatible:
-    enum:
+    oneOf:
-      - allwinner,sun20i-d1-usb-phy
+      - enum:
-      - allwinner,sun50i-a64-usb-phy
+          - allwinner,sun20i-d1-usb-phy
+          - allwinner,sun50i-a64-usb-phy
+      - items:
+          - const: allwinner,sun50i-a100-usb-phy
+          - const: allwinner,sun20i-d1-usb-phy
 
   reg:
     items:

Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml

@@ -23,6 +23,7 @@ properties:
           - enum:
               - allwinner,sun8i-a83t-musb
               - allwinner,sun20i-d1-musb
+              - allwinner,sun50i-a100-musb
               - allwinner,sun50i-h6-musb
           - const: allwinner,sun8i-a33-musb
       - items:

Documentation/devicetree/bindings/usb/generic-ehci.yaml

@@ -28,6 +28,7 @@ properties:
       - items:
           - enum:
               - allwinner,sun4i-a10-ehci
+              - allwinner,sun50i-a100-ehci
               - allwinner,sun50i-a64-ehci
               - allwinner,sun50i-h6-ehci
               - allwinner,sun50i-h616-ehci

Documentation/devicetree/bindings/usb/generic-ohci.yaml

@@ -15,6 +15,7 @@ properties:
       - items:
           - enum:
               - allwinner,sun4i-a10-ohci
+              - allwinner,sun50i-a100-ohci
               - allwinner,sun50i-a64-ohci
               - allwinner,sun50i-h6-ohci
               - allwinner,sun50i-h616-ohci

arch/arm/boot/dts/allwinner/Makefile

@@ -215,6 +215,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a33-olinuxino.dtb \
 	sun8i-a33-q8-tablet.dtb \
 	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-a33-vstar.dtb \
 	sun8i-a83t-allwinner-h8homlet-v2.dtb \
 	sun8i-a83t-bananapi-m3.dtb \
 	sun8i-a83t-cubietruck-plus.dtb \
@@ -268,7 +269,3 @@ dtb-$(CONFIG_MACH_SUNIV) += \
 	suniv-f1c100s-licheepi-nano.dtb \
 	suniv-f1c200s-lctech-pi.dtb \
 	suniv-f1c200s-popstick-v1.1.dtb
-dtb-$(CONFIG_MACH_SUNIV) += \
-	suniv-f1c100s-licheepi-nano.dtb \
-	suniv-f1c200s-lctech-pi.dtb \
-	suniv-f1c200s-popstick-v1.1.dtb

arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi

@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+#include "sun8i-a33.dtsi"
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};

arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts

@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "sun8i-a33-vstar-core1.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rervision A33-Vstar";
+	compatible = "rervision,a33-vstar",
+		     "rervision,a33-core1",
+		     "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &r8152;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		/* Onboard GL850G hub which needs no extra power sequence */
+		compatible = "usb5e3,608";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		r8152: ethernet@4 {
+			/*
+			 * Onboard Realtek RTL8152 USB Ethernet,
+			 * with no MAC address programmed
+			 */
+			compatible = "usbbda,8152";
+			reg = <4>;
+		};
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-191 {
+		label = "V+";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191011>;
+	};
+
+	button-391 {
+		label = "V-";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <391304>;
+	};
+
+	button-600 {
+		label = "BACK";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+/*
+ * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same
+ * time, with the two being in sync. Since this is not really
+ * supported right now, just use the two as always on, and we will fix
+ * it later.
+ */
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&sound {
+	/* TODO: on-board microphone */
+
+	simple-audio-card,widgets = "Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+		"Left DAC", "DACL",
+		"Right DAC", "DACR",
+		"Headphone Jack", "HP";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};

arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts

@@ -7,6 +7,8 @@
 
 #include "sun50i-a100.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 /{
 	model = "Allwinner A100 Perf1";
 	compatible = "allwinner,a100-perf1", "allwinner,sun50i-a100";
@@ -20,6 +22,22 @@ chosen {
 	};
 };
 
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_aldo1>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
 &pio {
 	vcc-pb-supply = <&reg_dcdc1>;
 	vcc-pc-supply = <&reg_eldo1>;

arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi

@@ -25,21 +25,21 @@ cpu0: cpu@0 {
 			enable-method = "psci";
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <0x1>;
 			enable-method = "psci";
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <0x2>;
 			enable-method = "psci";
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <0x3>;
@@ -47,6 +47,15 @@ cpu@3 {
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -135,6 +144,14 @@ ths_calibration: calib@14 {
 			};
 		};
 
+		watchdog@30090a0 {
+			compatible = "allwinner,sun50i-a100-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x030090a0 0x20>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dcxo24M>;
+		};
+
 		pio: pinctrl@300b000 {
 			compatible = "allwinner,sun50i-a100-pinctrl";
 			reg = <0x0300b000 0x400>;
@@ -152,12 +169,83 @@ pio: pinctrl@300b000 {
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC0", "PC1", "PC5", "PC6",
+				       "PC8", "PC9", "PC10", "PC11",
+				       "PC13", "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB9", "PB10";
 				function = "uart0";
 			};
 		};
 
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun50i-a100-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun50i-a100-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun50i-a100-emmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		uart0: serial@5000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x05000000 0x400>;
@@ -285,6 +373,97 @@ ths: thermal-sensor@5070400 {
 			#thermal-sensor-cells = <1>;
 		};
 
+		usb_otg: usb@5100000 {
+			compatible = "allwinner,sun50i-a100-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x05100000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@5100400 {
+			compatible = "allwinner,sun50i-a100-usb-phy",
+				     "allwinner,sun20i-d1-usb-phy";
+			reg = <0x05100400 0x100>,
+			      <0x05101800 0x100>,
+			      <0x05200800 0x100>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@5101000 {
+			compatible = "allwinner,sun50i-a100-ehci",
+				     "generic-ehci";
+			reg = <0x05101000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@5101400 {
+			compatible = "allwinner,sun50i-a100-ohci",
+				     "generic-ohci";
+			reg = <0x05101400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@5200000 {
+			compatible = "allwinner,sun50i-a100-ehci",
+				     "generic-ehci";
+			reg = <0x05200000 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@5200400 {
+			compatible = "allwinner,sun50i-a100-ohci",
+				     "generic-ohci";
+			reg = <0x05200400 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		r_ccu: clock@7010000 {
 			compatible = "allwinner,sun50i-a100-r-ccu";
 			reg = <0x07010000 0x300>;

arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi

@@ -188,12 +188,30 @@ touchscreen@5d {
 &i2c1 {
 	status = "okay";
 
+	/* Alternative magnetometer */
+	af8133j: magnetometer@1c {
+		compatible = "voltafield,af8133j";
+		reg = <0x1c>;
+		reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>;
+		avdd-supply = <&reg_dldo1>;
+		dvdd-supply = <&reg_dldo1>;
+		mount-matrix = "0", "-1", "0",
+				"-1", "0", "0",
+				"0", "0", "-1";
+
+		/* status will be fixed up in firmware */
+		status = "disabled";
+	};
+
 	/* Magnetometer */
 	lis3mdl: magnetometer@1e {
 		compatible = "st,lis3mdl-magn";
 		reg = <0x1e>;
 		vdd-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_dldo1>;
+		mount-matrix = "0", "1", "0",
+				"-1", "0", "0",
+				"0", "0", "1";
 	};
 
 	/* Light/proximity sensor */
@@ -212,6 +230,9 @@ accelerometer@68 {
 		interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
 		vdd-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_dldo1>;
+		mount-matrix = "0", "1", "0",
+			       "-1", "0", "0",
+			       "0", "0", "1";
 	};
 };
 

arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts

@@ -65,6 +65,11 @@ reg_vcc5v: vcc5v {
 	};
 };
 
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };

arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts

@@ -136,6 +136,7 @@ &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
 	status = "okay";
 };
 

arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts

@@ -88,6 +88,7 @@ ext_rgmii_phy: ethernet-phy@7 {
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";

arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts

@@ -157,6 +157,7 @@ eth_mac1: mac-address@fa {
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts

@@ -153,6 +153,7 @@ &ir {
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts

@@ -153,6 +153,7 @@ &ir {
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts

@@ -82,6 +82,7 @@ ext_rgmii_phy: ethernet-phy@1 {
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts

@@ -79,6 +79,7 @@ hdmi_out_con: endpoint {
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
 	status = "okay";

arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts

@@ -129,6 +129,7 @@ ext_rgmii_phy: ethernet-phy@1 {
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts

@@ -131,6 +131,7 @@ hdmi_out_con: endpoint {
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi

@@ -94,6 +94,7 @@ hdmi_out_con: endpoint {
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };

arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts

@@ -133,6 +133,7 @@ ext_rgmii_phy: ethernet-phy@1 {
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };

arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi

@@ -124,6 +124,7 @@ &mmc0 {
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };

arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi

@@ -59,6 +59,11 @@ reg_usb1_vbus: regulator-usb1-vbus {
 	};
 };
 
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -81,6 +86,7 @@ ext_rgmii_phy: ethernet-phy@1 {
 
 &mmc0 {
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };

arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts

@@ -33,6 +33,11 @@ reg_vcc5v: vcc5v {
 	};
 };
 
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdca>;
 };
@@ -52,6 +57,7 @@ &ir {
 &mmc0 {
 	vmmc-supply = <&reg_dcdce>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };

arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi

@@ -630,21 +630,6 @@ mdio0: mdio {
 			};
 		};
 
-		spdif: spdif@5093000 {
-			compatible = "allwinner,sun50i-h616-spdif";
-			reg = <0x05093000 0x400>;
-			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
-			clock-names = "apb", "spdif";
-			resets = <&ccu RST_BUS_SPDIF>;
-			dmas = <&dma 2>;
-			dma-names = "tx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spdif_tx_pin>;
-			#sound-dai-cells = <0>;
-			status = "disabled";
-		};
-
 		gpadc: adc@5070000 {
 			compatible = "allwinner,sun50i-h616-gpadc",
 				     "allwinner,sun20i-d1-gpadc";
@@ -679,6 +664,35 @@ lradc: lradc@5070800 {
 			status = "disabled";
 		};
 
+		spdif: spdif@5093000 {
+			compatible = "allwinner,sun50i-h616-spdif";
+			reg = <0x05093000 0x400>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			resets = <&ccu RST_BUS_SPDIF>;
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		codec: codec@5096000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h616-codec";
+			reg = <0x05096000 0x31c>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_AUDIO_CODEC>,
+				 <&ccu CLK_AUDIO_CODEC_1X>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_AUDIO_CODEC>;
+			dmas = <&dma 6>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
 		usbotg: usb@5100000 {
 			compatible = "allwinner,sun50i-h616-musb",
 				     "allwinner,sun8i-h3-musb";

arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts

@@ -111,6 +111,7 @@ ext_rgmii_phy: ethernet-phy@1 {
 };
 
 &mmc0 {
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;	/* PF6 */
 	vmmc-supply = <&reg_vcc3v3>;

arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts

@@ -54,6 +54,11 @@ reg_vcc3v3: vcc3v3 {
 	};
 };
 
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };

arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts

@@ -52,6 +52,11 @@ wifi_pwrseq: pwrseq {
 	};
 };
 
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
@@ -71,6 +76,7 @@ &ir {
 &mmc0 {
 	vmmc-supply = <&reg_dldo1>;
 	cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>;	/* PI16 */
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };

arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts

@@ -177,6 +177,12 @@ reg_vcc5v: regulator-vcc5v { /* USB-C power input */
 	};
 };
 
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	allwinner,pa-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; // PI5
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc1>;
 };
@@ -270,7 +276,7 @@ reg_aldo3: aldo3 {
 			reg_aldo4: aldo4 {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc-pg";
+				regulator-name = "avcc";
 			};
 
 			reg_bldo1: bldo1 {
@@ -293,7 +299,10 @@ reg_bldo4: bldo4 {
 			};
 
 			reg_cldo1: cldo1 {
-				/* 3.3v - audio codec - not yet implemented */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-spkr-amp";
 			};
 
 			reg_cldo2: cldo2 {