Kernel/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2025-01-01 10:45:49 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

scsi: core: Update additional sense codes list

Browse Source 
Add missing Additional Sense Codes listed in
http://www.t10.org/lists/asc-num.txt.

Link: https://lore.kernel.org/r/20200910074843.217661-3-damien.lemoal@wdc.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit is contained in:
Damien Le Moal 2020-09-10 16:48:42 +09:00 committed by Martin K. Petersen
parent 342c81eeaa
commit 46c9d608f9
1 changed files with 53 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

54
drivers/scsi/sense_codes.h
View File

@ -1,7 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* The canonical list of T10 Additional Sense Codes is available at:
* http://www.t10.org/lists/asc-num.txt [most recent: 20141221]
* http://www.t10.org/lists/asc-num.txt [most recent: 20200817]
*/
SENSE_CODE(0x0000, "No additional sense information")
@ -29,6 +29,7 @@ SENSE_CODE(0x001E, "Conflicting SA creation request")
SENSE_CODE(0x001F, "Logical unit transitioning to another power condition")
SENSE_CODE(0x0020, "Extended copy information available")
SENSE_CODE(0x0021, "Atomic command aborted due to ACA")
SENSE_CODE(0x0022, "Deferred microcode is pending")
SENSE_CODE(0x0100, "No index/sector signal")
@ -72,6 +73,9 @@ SENSE_CODE(0x041F, "Logical unit not ready, microcode download required")
SENSE_CODE(0x0420, "Logical unit not ready, logical unit reset required")
SENSE_CODE(0x0421, "Logical unit not ready, hard reset required")
SENSE_CODE(0x0422, "Logical unit not ready, power cycle required")
SENSE_CODE(0x0423, "Logical unit not ready, affiliation required")
SENSE_CODE(0x0424, "Depopulation in progress")
SENSE_CODE(0x0425, "Depopulation restoration in progress")
SENSE_CODE(0x0500, "Logical unit does not respond to selection")
@ -104,6 +108,17 @@ SENSE_CODE(0x0B06, "Warning - non-volatile cache now volatile")
SENSE_CODE(0x0B07, "Warning - degraded power to non-volatile cache")
SENSE_CODE(0x0B08, "Warning - power loss expected")
SENSE_CODE(0x0B09, "Warning - device statistics notification active")
SENSE_CODE(0x0B0A, "Warning - high critical temperature limit exceeded")
SENSE_CODE(0x0B0B, "Warning - low critical temperature limit exceeded")
SENSE_CODE(0x0B0C, "Warning - high operating temperature limit exceeded")
SENSE_CODE(0x0B0D, "Warning - low operating temperature limit exceeded")
SENSE_CODE(0x0B0E, "Warning - high critical humidity limit exceeded")
SENSE_CODE(0x0B0F, "Warning - low critical humidity limit exceeded")
SENSE_CODE(0x0B10, "Warning - high operating humidity limit exceeded")
SENSE_CODE(0x0B11, "Warning - low operating humidity limit exceeded")
SENSE_CODE(0x0B12, "Warning - microcode security at risk")
SENSE_CODE(0x0B13, "Warning - microcode digital signature validation failure")
SENSE_CODE(0x0B14, "Warning - physical element status change")
SENSE_CODE(0x0C00, "Write error")
SENSE_CODE(0x0C01, "Write error - recovered with auto reallocation")
@ -122,6 +137,8 @@ SENSE_CODE(0x0C0D, "Write error - not enough unsolicited data")
SENSE_CODE(0x0C0E, "Multiple write errors")
SENSE_CODE(0x0C0F, "Defects in error window")
SENSE_CODE(0x0C10, "Incomplete multiple atomic write operations")
SENSE_CODE(0x0C11, "Write error - recovery scan needed")
SENSE_CODE(0x0C12, "Write error - insufficient zone resources")
SENSE_CODE(0x0D00, "Error detected by third party temporary initiator")
SENSE_CODE(0x0D01, "Third party device failure")
@ -242,6 +259,9 @@ SENSE_CODE(0x2009, "Access denied - invalid LU identifier")
SENSE_CODE(0x200A, "Access denied - invalid proxy token")
SENSE_CODE(0x200B, "Access denied - ACL LUN conflict")
SENSE_CODE(0x200C, "Illegal command when not in append-only mode")
SENSE_CODE(0x200D, "Not an administrative logical unit")
SENSE_CODE(0x200E, "Not a subsidiary logical unit")
SENSE_CODE(0x200F, "Not a conglomerate logical unit")
SENSE_CODE(0x2100, "Logical block address out of range")
SENSE_CODE(0x2101, "Invalid element address")
@ -251,6 +271,8 @@ SENSE_CODE(0x2104, "Unaligned write command")
SENSE_CODE(0x2105, "Write boundary violation")
SENSE_CODE(0x2106, "Attempt to read invalid data")
SENSE_CODE(0x2107, "Read boundary violation")
SENSE_CODE(0x2108, "Misaligned write command")
SENSE_CODE(0x2109, "Attempt to access gap zone")
SENSE_CODE(0x2200, "Illegal function (use 20 00, 24 00, or 26 00)")
@ -275,6 +297,7 @@ SENSE_CODE(0x2405, "Security working key frozen")
SENSE_CODE(0x2406, "Nonce not unique")
SENSE_CODE(0x2407, "Nonce timestamp out of range")
SENSE_CODE(0x2408, "Invalid XCDB")
SENSE_CODE(0x2409, "Invalid fast format")
SENSE_CODE(0x2500, "Logical unit not supported")
@ -297,6 +320,10 @@ SENSE_CODE(0x260F, "Invalid data-out buffer integrity check value")
SENSE_CODE(0x2610, "Data decryption key fail limit reached")
SENSE_CODE(0x2611, "Incomplete key-associated data set")
SENSE_CODE(0x2612, "Vendor specific key reference not found")
SENSE_CODE(0x2613, "Application tag mode page is invalid")
SENSE_CODE(0x2614, "Tape stream mirroring prevented")
SENSE_CODE(0x2615, "Copy source or copy destination not authorized")
SENSE_CODE(0x2616, "Fast copy not possible")
SENSE_CODE(0x2700, "Write protected")
SENSE_CODE(0x2701, "Hardware write protected")
@ -342,6 +369,7 @@ SENSE_CODE(0x2A12, "Data encryption parameters changed by vendor specific event"
SENSE_CODE(0x2A13, "Data encryption key instance counter has changed")
SENSE_CODE(0x2A14, "SA creation capabilities data has changed")
SENSE_CODE(0x2A15, "Medium removal prevention preempted")
SENSE_CODE(0x2A16, "Zone reset write pointer recommended")
SENSE_CODE(0x2B00, "Copy cannot execute since host cannot disconnect")
@ -360,6 +388,11 @@ SENSE_CODE(0x2C0B, "Not reserved")
SENSE_CODE(0x2C0C, "Orwrite generation does not match")
SENSE_CODE(0x2C0D, "Reset write pointer not allowed")
SENSE_CODE(0x2C0E, "Zone is offline")
SENSE_CODE(0x2C0F, "Stream not open")
SENSE_CODE(0x2C10, "Unwritten data in zone")
SENSE_CODE(0x2C11, "Descriptor format sense data required")
SENSE_CODE(0x2C12, "Zone is inactive")
SENSE_CODE(0x2C13, "Well known logical unit access required")
SENSE_CODE(0x2D00, "Overwrite error on update in place")
@ -395,6 +428,8 @@ SENSE_CODE(0x3100, "Medium format corrupted")
SENSE_CODE(0x3101, "Format command failed")
SENSE_CODE(0x3102, "Zoned formatting failed due to spare linking")
SENSE_CODE(0x3103, "Sanitize command failed")
SENSE_CODE(0x3104, "Depopulation failed")
SENSE_CODE(0x3105, "Depopulation restoration failed")
SENSE_CODE(0x3200, "No defect spare location available")
SENSE_CODE(0x3201, "Defect list update failure")
@ -419,6 +454,7 @@ SENSE_CODE(0x3802, "Esn - power management class event")
SENSE_CODE(0x3804, "Esn - media class event")
SENSE_CODE(0x3806, "Esn - device busy class event")
SENSE_CODE(0x3807, "Thin Provisioning soft threshold reached")
SENSE_CODE(0x3808, "Depopulation interrupted")
SENSE_CODE(0x3900, "Saving parameters not supported")
@ -456,6 +492,7 @@ SENSE_CODE(0x3B19, "Element enabled")
SENSE_CODE(0x3B1A, "Data transfer device removed")
SENSE_CODE(0x3B1B, "Data transfer device inserted")
SENSE_CODE(0x3B1C, "Too many logical objects on partition to support operation")
SENSE_CODE(0x3B20, "Element static information changed")
SENSE_CODE(0x3D00, "Invalid bits in identify message")
@ -488,6 +525,11 @@ SENSE_CODE(0x3F13, "iSCSI IP address removed")
SENSE_CODE(0x3F14, "iSCSI IP address changed")
SENSE_CODE(0x3F15, "Inspect referrals sense descriptors")
SENSE_CODE(0x3F16, "Microcode has been changed without reset")
SENSE_CODE(0x3F17, "Zone transition to full")
SENSE_CODE(0x3F18, "Bind completed")
SENSE_CODE(0x3F19, "Bind redirected")
SENSE_CODE(0x3F1A, "Subsidiary binding changed")
/*
* SENSE_CODE(0x40NN, "Ram failure")
* SENSE_CODE(0x40NN, "Diagnostic failure on component nn")
@ -589,6 +631,9 @@ SENSE_CODE(0x550B, "Insufficient power for operation")
SENSE_CODE(0x550C, "Insufficient resources to create rod")
SENSE_CODE(0x550D, "Insufficient resources to create rod token")
SENSE_CODE(0x550E, "Insufficient zone resources")
SENSE_CODE(0x550F, "Insufficient zone resources to complete write")
SENSE_CODE(0x5510, "Maximum number of streams open")
SENSE_CODE(0x5511, "Insufficient resources to bind")
SENSE_CODE(0x5700, "Unable to recover table-of-contents")
@ -692,6 +737,7 @@ SENSE_CODE(0x5D69, "Firmware impending failure throughput performance")
SENSE_CODE(0x5D6A, "Firmware impending failure seek time performance")
SENSE_CODE(0x5D6B, "Firmware impending failure spin-up retry count")
SENSE_CODE(0x5D6C, "Firmware impending failure drive calibration retry count")
SENSE_CODE(0x5D73, "Media impending failure endurance limit met")
SENSE_CODE(0x5DFF, "Failure prediction threshold exceeded (false)")
SENSE_CODE(0x5E00, "Low power condition on")
@ -744,6 +790,8 @@ SENSE_CODE(0x6708, "Assign failure occurred")
SENSE_CODE(0x6709, "Multiply assigned logical unit")
SENSE_CODE(0x670A, "Set target port groups command failed")
SENSE_CODE(0x670B, "ATA device feature not enabled")
SENSE_CODE(0x670C, "Command rejected")
SENSE_CODE(0x670D, "Explicit bind not allowed")
SENSE_CODE(0x6800, "Logical unit not configured")
SENSE_CODE(0x6801, "Subsidiary logical unit not configured")
@ -772,6 +820,10 @@ SENSE_CODE(0x6F04, "Media region code is mismatched to logical unit region")
SENSE_CODE(0x6F05, "Drive region must be permanent/region reset count error")
SENSE_CODE(0x6F06, "Insufficient block count for binding nonce recording")
SENSE_CODE(0x6F07, "Conflict in binding nonce recording")
SENSE_CODE(0x6F08, "Insufficient permission")
SENSE_CODE(0x6F09, "Invalid drive-host pairing server")
SENSE_CODE(0x6F0A, "Drive-host pairing suspended")
/*
* SENSE_CODE(0x70NN, "Decompression exception short algorithm id of nn")
*/