i3c: Fix typo "Provisional ID" to "Provisioned ID"

The MIPI I3C spec refers to a Provisioned ID, since it is (sometimes)
provisioned at device manufacturing.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231003075339.197099-1-matt@codeconstruct.com.au
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Documentation/ABI/testing/sysfs-bus-i3c

@@ -67,7 +67,7 @@ What:		/sys/bus/i3c/devices/i3c-<bus-id>/pid
 KernelVersion:  5.0
 Contact:	linux-i3c@vger.kernel.org
 Description:
-		PID stands for Provisional ID and is used to uniquely identify
+		PID stands for Provisioned ID and is used to uniquely identify
 		a device on a bus. This PID contains information about the
 		vendor, the part and an instance ID so that several devices of
 		the same type can be connected on the same bus.
@@ -123,7 +123,7 @@ What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/pid
 KernelVersion:  5.0
 Contact:	linux-i3c@vger.kernel.org
 Description:
-		PID stands for Provisional ID and is used to uniquely identify
+		PID stands for Provisioned ID and is used to uniquely identify
 		a device on a bus. This PID contains information about the
 		vendor, the part and an instance ID so that several devices of
 		the same type can be connected on the same bus.

Documentation/devicetree/bindings/i3c/i3c.yaml

@@ -119,12 +119,12 @@ patternProperties:
                 minimum: 0
                 maximum: 0x7f
               - description: |
-                  First half of the Provisional ID (following the PID
+                  First half of the Provisioned ID (following the PID
                   definition provided by the I3C specification).
 
                   Contains the manufacturer ID left-shifted by 1.
               - description: |
-                  Second half of the Provisional ID (following the PID
+                  Second half of the Provisioned ID (following the PID
                   definition provided by the I3C specification).
 
                   Contains the ORing of the part ID left-shifted by 16,

Documentation/driver-api/i3c/protocol.rst

@@ -71,8 +71,8 @@ During DAA, each I3C device reports 3 important things:
   related capabilities
 * DCR: Device Characteristic Register. This 8-bit register describes the
   functionalities provided by the device
-* Provisional ID: A 48-bit unique identifier. On a given bus there should be no
-  Provisional ID collision, otherwise the discovery mechanism may fail.
+* Provisioned ID: A 48-bit unique identifier. On a given bus there should be no
+  Provisioned ID collision, otherwise the discovery mechanism may fail.
 
 I3C slave events
 ================

drivers/i3c/master/svc-i3c-master.c

@@ -765,7 +765,7 @@ static int svc_i3c_master_do_daa_locked(struct svc_i3c_master *master,
 			u8 data[6];
 
 			/*
-			 * We only care about the 48-bit provisional ID yet to
+			 * We only care about the 48-bit provisioned ID yet to
 			 * be sure a device does not nack an address twice.
 			 * Otherwise, we would just need to flush the RX FIFO.
 			 */

include/linux/i3c/device.h

@@ -96,7 +96,7 @@ enum i3c_dcr {
 
 /**
  * struct i3c_device_info - I3C device information
- * @pid: Provisional ID
+ * @pid: Provisioned ID
  * @bcr: Bus Characteristic Register
  * @dcr: Device Characteristic Register
  * @static_addr: static/I2C address

include/linux/i3c/master.h

@@ -166,7 +166,7 @@ struct i3c_device_ibi_info {
  *		 assigned a dynamic address by the master. Will be used during
  *		 bus initialization to assign it a specific dynamic address
  *		 before starting DAA (Dynamic Address Assignment)
- * @pid: I3C Provisional ID exposed by the device. This is a unique identifier
+ * @pid: I3C Provisioned ID exposed by the device. This is a unique identifier
  *	 that may be used to attach boardinfo to i3c_dev_desc when the device
  *	 does not have a static address
  * @of_node: optional DT node in case the device has been described in the DT