Serial driver fixes for 6.13-rc3

Here are two small serial driver fixes for 6.13-rc3.  They are:
   - ioport build fallout fix for the 8250 port driver that should
     resolve Guenter's runtime problems
   - sh-sci driver bugfix for a reported problem
 
 Both of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ12XXg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymGXACfezq1bc3UAJeZqZcDhAQrhZKiLHsAoMx76hi1
 Ol6uRsbGrVi5bITDnuhl
 =wF8l
 -----END PGP SIGNATURE-----

Merge tag 'tty-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull serial driver fixes from Greg KH:
 "Here are two small serial driver fixes for 6.13-rc3.  They are:

   - ioport build fallout fix for the 8250 port driver that should
     resolve Guenter's runtime problems

   - sh-sci driver bugfix for a reported problem

  Both of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: Work around warning backtrace in serial8250_set_defaults
  serial: sh-sci: Check if TX data was written to device in .tx_empty()

drivers/tty/serial/8250/8250_port.c

@@ -467,7 +467,8 @@ static void set_io_from_upio(struct uart_port *p)
 		break;
 #endif
 	default:
-		WARN(1, "Unsupported UART type %x\n", p->iotype);
+		WARN(p->iotype != UPIO_PORT || p->iobase,
+		     "Unsupported UART type %x\n", p->iotype);
 		p->serial_in = no_serial_in;
 		p->serial_out = no_serial_out;
 	}

drivers/tty/serial/sh-sci.c

@@ -157,6 +157,7 @@ struct sci_port {
 
 	bool has_rtscts;
 	bool autorts;
+	bool tx_occurred;
 };
 
 #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
@@ -850,6 +851,7 @@ static void sci_transmit_chars(struct uart_port *port)
 {
 	struct tty_port *tport = &port->state->port;
 	unsigned int stopped = uart_tx_stopped(port);
+	struct sci_port *s = to_sci_port(port);
 	unsigned short status;
 	unsigned short ctrl;
 	int count;
@@ -885,6 +887,7 @@ static void sci_transmit_chars(struct uart_port *port)
 		}
 
 		sci_serial_out(port, SCxTDR, c);
+		s->tx_occurred = true;
 
 		port->icount.tx++;
 	} while (--count > 0);
@@ -1241,6 +1244,8 @@ static void sci_dma_tx_complete(void *arg)
 	if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
 
+	s->tx_occurred = true;
+
 	if (!kfifo_is_empty(&tport->xmit_fifo)) {
 		s->cookie_tx = 0;
 		schedule_work(&s->work_tx);
@@ -1731,6 +1736,19 @@ static void sci_flush_buffer(struct uart_port *port)
 		s->cookie_tx = -EINVAL;
 	}
 }
+
+static void sci_dma_check_tx_occurred(struct sci_port *s)
+{
+	struct dma_tx_state state;
+	enum dma_status status;
+
+	if (!s->chan_tx)
+		return;
+
+	status = dmaengine_tx_status(s->chan_tx, s->cookie_tx, &state);
+	if (status == DMA_COMPLETE || status == DMA_IN_PROGRESS)
+		s->tx_occurred = true;
+}
 #else /* !CONFIG_SERIAL_SH_SCI_DMA */
 static inline void sci_request_dma(struct uart_port *port)
 {
@@ -1740,6 +1758,10 @@ static inline void sci_free_dma(struct uart_port *port)
 {
 }
 
+static void sci_dma_check_tx_occurred(struct sci_port *s)
+{
+}
+
 #define sci_flush_buffer	NULL
 #endif /* !CONFIG_SERIAL_SH_SCI_DMA */
 
@@ -2076,6 +2098,12 @@ static unsigned int sci_tx_empty(struct uart_port *port)
 {
 	unsigned short status = sci_serial_in(port, SCxSR);
 	unsigned short in_tx_fifo = sci_txfill(port);
+	struct sci_port *s = to_sci_port(port);
+
+	sci_dma_check_tx_occurred(s);
+
+	if (!s->tx_occurred)
+		return TIOCSER_TEMT;
 
 	return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0;
 }
@@ -2247,6 +2275,7 @@ static int sci_startup(struct uart_port *port)
 
 	dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
 
+	s->tx_occurred = false;
 	sci_request_dma(port);
 
 	ret = sci_request_irq(s);