mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-12-28 16:56:26 +00:00
Documentation: networking: document ISO 15765-2
Document basic concepts, APIs and behaviour of the ISO 15675-2 (ISO-TP) CAN stack. Signed-off-by: Francesco Valla <valla.francesco@gmail.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20240501092413.414700-2-valla.francesco@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This commit is contained in:
Francesco Valla
Marc Kleine-Budde
parent
20e69650d5
commit
67711e0425
@ -19,6 +19,7 @@ Contents:
|
||||
caif/index
|
||||
ethtool-netlink
|
||||
ieee802154
|
||||
iso15765-2
|
||||
j1939
|
||||
kapi
|
||||
msg_zerocopy
|
||||
|
||||
386
Documentation/networking/iso15765-2.rst
Normal file
386
Documentation/networking/iso15765-2.rst
Normal file
@ -0,0 +1,386 @@
|
||||
.. SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
||||
|
||||
====================
|
||||
ISO 15765-2 (ISO-TP)
|
||||
====================
|
||||
|
||||
Overview
|
||||
========
|
||||
|
||||
ISO 15765-2, also known as ISO-TP, is a transport protocol specifically defined
|
||||
for diagnostic communication on CAN. It is widely used in the automotive
|
||||
industry, for example as the transport protocol for UDSonCAN (ISO 14229-3) or
|
||||
emission-related diagnostic services (ISO 15031-5).
|
||||
|
||||
ISO-TP can be used both on CAN CC (aka Classical CAN) and CAN FD (CAN with
|
||||
Flexible Datarate) based networks. It is also designed to be compatible with a
|
||||
CAN network using SAE J1939 as data link layer (however, this is not a
|
||||
requirement).
|
||||
|
||||
Specifications used
|
||||
-------------------
|
||||
|
||||
* ISO 15765-2:2024 : Road vehicles - Diagnostic communication over Controller
|
||||
Area Network (DoCAN). Part 2: Transport protocol and network layer services.
|
||||
|
||||
Addressing
|
||||
----------
|
||||
|
||||
In its simplest form, ISO-TP is based on two kinds of addressing modes for the
|
||||
nodes connected to the same network:
|
||||
|
||||
* physical addressing is implemented by two node-specific addresses and is used
|
||||
in 1-to-1 communication.
|
||||
|
||||
* functional addressing is implemented by one node-specific address and is used
|
||||
in 1-to-N communication.
|
||||
|
||||
Three different addressing formats can be employed:
|
||||
|
||||
* "normal" : each address is represented simply by a CAN ID.
|
||||
|
||||
* "extended": each address is represented by a CAN ID plus the first byte of
|
||||
the CAN payload; both the CAN ID and the byte inside the payload shall be
|
||||
different between two addresses.
|
||||
|
||||
* "mixed": each address is represented by a CAN ID plus the first byte of
|
||||
the CAN payload; the CAN ID is different between two addresses, but the
|
||||
additional byte is the same.
|
||||
|
||||
Transport protocol and associated frame types
|
||||
---------------------------------------------
|
||||
|
||||
When transmitting data using the ISO-TP protocol, the payload can either fit
|
||||
inside one single CAN message or not, also considering the overhead the protocol
|
||||
is generating and the optional extended addressing. In the first case, the data
|
||||
is transmitted at once using a so-called Single Frame (SF). In the second case,
|
||||
ISO-TP defines a multi-frame protocol, in which the sender provides (through a
|
||||
First Frame - FF) the PDU length which is to be transmitted and also asks for a
|
||||
Flow Control (FC) frame, which provides the maximum supported size of a macro
|
||||
data block (``blocksize``) and the minimum time between the single CAN messages
|
||||
composing such block (``stmin``). Once this information has been received, the
|
||||
sender starts to send frames containing fragments of the data payload (called
|
||||
Consecutive Frames - CF), stopping after every ``blocksize``-sized block to wait
|
||||
confirmation from the receiver which should then send another Flow Control
|
||||
frame to inform the sender about its availability to receive more data.
|
||||
|
||||
How to Use ISO-TP
|
||||
=================
|
||||
|
||||
As with others CAN protocols, the ISO-TP stack support is built into the
|
||||
Linux network subsystem for the CAN bus, aka. Linux-CAN or SocketCAN, and
|
||||
thus follows the same socket API.
|
||||
|
||||
Creation and basic usage of an ISO-TP socket
|
||||
--------------------------------------------
|
||||
|
||||
To use the ISO-TP stack, ``#include <linux/can/isotp.h>`` shall be used. A
|
||||
socket can then be created using the ``PF_CAN`` protocol family, the
|
||||
``SOCK_DGRAM`` type (as the underlying protocol is datagram-based by design)
|
||||
and the ``CAN_ISOTP`` protocol:
|
||||
|
||||
.. code-block:: C
|
||||
|
||||
s = socket(PF_CAN, SOCK_DGRAM, CAN_ISOTP);
|
||||
|
||||
After the socket has been successfully created, ``bind(2)`` shall be called to
|
||||
bind the socket to the desired CAN interface; to do so:
|
||||
|
||||
* a TX CAN ID shall be specified as part of the sockaddr supplied to the call
|
||||
itself.
|
||||
|
||||
* a RX CAN ID shall also be specified, unless broadcast flags have been set
|
||||
through socket option (explained below).
|
||||
|
||||
Once bound to an interface, the socket can be read from and written to using
|
||||
the usual ``read(2)`` and ``write(2)`` system calls, as well as ``send(2)``,
|
||||
``sendmsg(2)``, ``recv(2)`` and ``recvmsg(2)``.
|
||||
Unlike the CAN_RAW socket API, only the ISO-TP data field (the actual payload)
|
||||
is sent and received by the userspace application using these calls. The address
|
||||
information and the protocol information are automatically filled by the ISO-TP
|
||||
stack using the configuration supplied during socket creation. In the same way,
|
||||
the stack will use the transport mechanism when required (i.e., when the size
|
||||
of the data payload exceeds the MTU of the underlying CAN bus).
|
||||
|
||||
The sockaddr structure used for SocketCAN has extensions for use with ISO-TP,
|
||||
as specified below:
|
||||
|
||||
.. code-block:: C
|
||||
|
||||
struct sockaddr_can {
|
||||
sa_family_t can_family;
|
||||
int can_ifindex;
|
||||
union {
|
||||
struct { canid_t rx_id, tx_id; } tp;
|
||||
...
|
||||
} can_addr;
|
||||
}
|
||||
|
||||
* ``can_family`` and ``can_ifindex`` serve the same purpose as for other
|
||||
SocketCAN sockets.
|
||||
|
||||
* ``can_addr.tp.rx_id`` specifies the receive (RX) CAN ID and will be used as
|
||||
a RX filter.
|
||||
|
||||
* ``can_addr.tp.tx_id`` specifies the transmit (TX) CAN ID
|
||||
|
||||
ISO-TP socket options
|
||||
---------------------
|
||||
|
||||
When creating an ISO-TP socket, reasonable defaults are set. Some options can
|
||||
be modified with ``setsockopt(2)`` and/or read back with ``getsockopt(2)``.
|
||||
|
||||
General options
|
||||
~~~~~~~~~~~~~~~
|
||||
|
||||
General socket options can be passed using the ``CAN_ISOTP_OPTS`` optname:
|
||||
|
||||
.. code-block:: C
|
||||
|
||||
struct can_isotp_options opts;
|
||||
ret = setsockopt(s, SOL_CAN_ISOTP, CAN_ISOTP_OPTS, &opts, sizeof(opts))
|
||||
|
||||
where the ``can_isotp_options`` structure has the following contents:
|
||||
|
||||
.. code-block:: C
|
||||
|
||||
struct can_isotp_options {
|
||||
u32 flags;
|
||||
u32 frame_txtime;
|
||||
u8 ext_address;
|
||||
u8 txpad_content;
|
||||
u8 rxpad_content;
|
||||
u8 rx_ext_address;
|
||||
};
|
||||
|
||||
* ``flags``: modifiers to be applied to the default behaviour of the ISO-TP
|
||||
stack. Following flags are available:
|
||||
|
||||
* ``CAN_ISOTP_LISTEN_MODE``: listen only (do not send FC frames); normally
|
||||
used as a testing feature.
|
||||
|
||||
* ``CAN_ISOTP_EXTEND_ADDR``: use the byte specified in ``ext_address`` as an
|
||||
additional address component. This enables the "mixed" addressing format if
|
||||
used alone, or the "extended" addressing format if used in conjunction with
|
||||
``CAN_ISOTP_RX_EXT_ADDR``.
|
||||
|
||||
* ``CAN_ISOTP_TX_PADDING``: enable padding for transmitted frames, using
|
||||
``txpad_content`` as value for the padding bytes.
|
||||
|
||||
* ``CAN_ISOTP_RX_PADDING``: enable padding for the received frames, using
|
||||
``rxpad_content`` as value for the padding bytes.
|
||||
|
||||
* ``CAN_ISOTP_CHK_PAD_LEN``: check for correct padding length on the received
|
||||
frames.
|
||||
|
||||
* ``CAN_ISOTP_CHK_PAD_DATA``: check padding bytes on the received frames
|
||||
against ``rxpad_content``; if ``CAN_ISOTP_RX_PADDING`` is not specified,
|
||||
this flag is ignored.
|
||||
|
||||
* ``CAN_ISOTP_HALF_DUPLEX``: force ISO-TP socket in half duplex mode
|
||||
(that is, transport mechanism can only be incoming or outgoing at the same
|
||||
time, not both).
|
||||
|
||||
* ``CAN_ISOTP_FORCE_TXSTMIN``: ignore stmin from received FC; normally
|
||||
used as a testing feature.
|
||||
|
||||
* ``CAN_ISOTP_FORCE_RXSTMIN``: ignore CFs depending on rx stmin; normally
|
||||
used as a testing feature.
|
||||
|
||||
* ``CAN_ISOTP_RX_EXT_ADDR``: use ``rx_ext_address`` instead of ``ext_address``
|
||||
as extended addressing byte on the reception path. If used in conjunction
|
||||
with ``CAN_ISOTP_EXTEND_ADDR``, this flag effectively enables the "extended"
|
||||
addressing format.
|
||||
|
||||
* ``CAN_ISOTP_WAIT_TX_DONE``: wait until the frame is sent before returning
|
||||
from ``write(2)`` and ``send(2)`` calls (i.e., blocking write operations).
|
||||
|
||||
* ``CAN_ISOTP_SF_BROADCAST``: use 1-to-N functional addressing (cannot be
|
||||
specified alongside ``CAN_ISOTP_CF_BROADCAST``).
|
||||
|
||||
* ``CAN_ISOTP_CF_BROADCAST``: use 1-to-N transmission without flow control
|
||||
(cannot be specified alongside ``CAN_ISOTP_SF_BROADCAST``).
|
||||
NOTE: this is not covered by the ISO 15765-2 standard.
|
||||
|
||||
* ``CAN_ISOTP_DYN_FC_PARMS``: enable dynamic update of flow control
|
||||
parameters.
|
||||
|
||||
* ``frame_txtime``: frame transmission time (defined as N_As/N_Ar inside the
|
||||
ISO standard); if ``0``, the default (or the last set value) is used.
|
||||
To set the transmission time to ``0``, the ``CAN_ISOTP_FRAME_TXTIME_ZERO``
|
||||
macro (equal to 0xFFFFFFFF) shall be used.
|
||||
|
||||
* ``ext_address``: extended addressing byte, used if the
|
||||
``CAN_ISOTP_EXTEND_ADDR`` flag is specified.
|
||||
|
||||
* ``txpad_content``: byte used as padding value for transmitted frames.
|
||||
|
||||
* ``rxpad_content``: byte used as padding value for received frames.
|
||||
|
||||
* ``rx_ext_address``: extended addressing byte for the reception path, used if
|
||||
the ``CAN_ISOTP_RX_EXT_ADDR`` flag is specified.
|
||||
|
||||
Flow Control options
|
||||
~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
Flow Control (FC) options can be passed using the ``CAN_ISOTP_RECV_FC`` optname
|
||||
to provide the communication parameters for receiving ISO-TP PDUs.
|
||||
|
||||
.. code-block:: C
|
||||
|
||||
struct can_isotp_fc_options fc_opts;
|
||||
ret = setsockopt(s, SOL_CAN_ISOTP, CAN_ISOTP_RECV_FC, &fc_opts, sizeof(fc_opts));
|
||||
|
||||
where the ``can_isotp_fc_options`` structure has the following contents:
|
||||
|
||||
.. code-block:: C
|
||||
|
||||
struct can_isotp_options {
|
||||
u8 bs;
|
||||
u8 stmin;
|
||||
u8 wftmax;
|
||||
};
|
||||
|
||||
* ``bs``: blocksize provided in flow control frames.
|
||||
|
||||
* ``stmin``: minimum separation time provided in flow control frames; can
|
||||
have the following values (others are reserved):
|
||||
|
||||
* 0x00 - 0x7F : 0 - 127 ms
|
||||
|
||||
* 0xF1 - 0xF9 : 100 us - 900 us
|
||||
|
||||
* ``wftmax``: maximum number of wait frames provided in flow control frames.
|
||||
|
||||
Link Layer options
|
||||
~~~~~~~~~~~~~~~~~~
|
||||
|
||||
Link Layer (LL) options can be passed using the ``CAN_ISOTP_LL_OPTS`` optname:
|
||||
|
||||
.. code-block:: C
|
||||
|
||||
struct can_isotp_ll_options ll_opts;
|
||||
ret = setsockopt(s, SOL_CAN_ISOTP, CAN_ISOTP_LL_OPTS, &ll_opts, sizeof(ll_opts));
|
||||
|
||||
where the ``can_isotp_ll_options`` structure has the following contents:
|
||||
|
||||
.. code-block:: C
|
||||
|
||||
struct can_isotp_ll_options {
|
||||
u8 mtu;
|
||||
u8 tx_dl;
|
||||
u8 tx_flags;
|
||||
};
|
||||
|
||||
* ``mtu``: generated and accepted CAN frame type, can be equal to ``CAN_MTU``
|
||||
for classical CAN frames or ``CANFD_MTU`` for CAN FD frames.
|
||||
|
||||
* ``tx_dl``: maximum payload length for transmitted frames, can have one value
|
||||
among: 8, 12, 16, 20, 24, 32, 48, 64. Values above 8 only apply to CAN FD
|
||||
traffic (i.e.: ``mtu = CANFD_MTU``).
|
||||
|
||||
* ``tx_flags``: flags set into ``struct canfd_frame.flags`` at frame creation.
|
||||
Only applies to CAN FD traffic (i.e.: ``mtu = CANFD_MTU``).
|
||||
|
||||
Transmission stmin
|
||||
~~~~~~~~~~~~~~~~~~
|
||||
|
||||
The transmission minimum separation time (stmin) can be forced using the
|
||||
``CAN_ISOTP_TX_STMIN`` optname and providing an stmin value in microseconds as
|
||||
a 32bit unsigned integer; this will overwrite the value sent by the receiver in
|
||||
flow control frames:
|
||||
|
||||
.. code-block:: C
|
||||
|
||||
uint32_t stmin;
|
||||
ret = setsockopt(s, SOL_CAN_ISOTP, CAN_ISOTP_TX_STMIN, &stmin, sizeof(stmin));
|
||||
|
||||
Reception stmin
|
||||
~~~~~~~~~~~~~~~
|
||||
|
||||
The reception minimum separation time (stmin) can be forced using the
|
||||
``CAN_ISOTP_RX_STMIN`` optname and providing an stmin value in microseconds as
|
||||
a 32bit unsigned integer; received Consecutive Frames (CF) which timestamps
|
||||
differ less than this value will be ignored:
|
||||
|
||||
.. code-block:: C
|
||||
|
||||
uint32_t stmin;
|
||||
ret = setsockopt(s, SOL_CAN_ISOTP, CAN_ISOTP_RX_STMIN, &stmin, sizeof(stmin));
|
||||
|
||||
Multi-frame transport support
|
||||
-----------------------------
|
||||
|
||||
The ISO-TP stack contained inside the Linux kernel supports the multi-frame
|
||||
transport mechanism defined by the standard, with the following constraints:
|
||||
|
||||
* the maximum size of a PDU is defined by a module parameter, with an hard
|
||||
limit imposed at build time.
|
||||
|
||||
* when a transmission is in progress, subsequent calls to ``write(2)`` will
|
||||
block, while calls to ``send(2)`` will either block or fail depending on the
|
||||
presence of the ``MSG_DONTWAIT`` flag.
|
||||
|
||||
* no support is present for sending "wait frames": whether a PDU can be fully
|
||||
received or not is decided when the First Frame is received.
|
||||
|
||||
Errors
|
||||
------
|
||||
|
||||
Following errors are reported to userspace:
|
||||
|
||||
RX path errors
|
||||
~~~~~~~~~~~~~~
|
||||
|
||||
============ ===============================================================
|
||||
-ETIMEDOUT timeout of data reception
|
||||
-EILSEQ sequence number mismatch during a multi-frame reception
|
||||
-EBADMSG data reception with wrong padding
|
||||
============ ===============================================================
|
||||
|
||||
TX path errors
|
||||
~~~~~~~~~~~~~~
|
||||
|
||||
========== =================================================================
|
||||
-ECOMM flow control reception timeout
|
||||
-EMSGSIZE flow control reception overflow
|
||||
-EBADMSG flow control reception with wrong layout/padding
|
||||
========== =================================================================
|
||||
|
||||
Examples
|
||||
========
|
||||
|
||||
Basic node example
|
||||
------------------
|
||||
|
||||
Following example implements a node using "normal" physical addressing, with
|
||||
RX ID equal to 0x18DAF142 and a TX ID equal to 0x18DA42F1. All options are left
|
||||
to their default.
|
||||
|
||||
.. code-block:: C
|
||||
|
||||
int s;
|
||||
struct sockaddr_can addr;
|
||||
int ret;
|
||||
|
||||
s = socket(PF_CAN, SOCK_DGRAM, CAN_ISOTP);
|
||||
if (s < 0)
|
||||
exit(1);
|
||||
|
||||
addr.can_family = AF_CAN;
|
||||
addr.can_ifindex = if_nametoindex("can0");
|
||||
addr.tp.tx_id = 0x18DA42F1 | CAN_EFF_FLAG;
|
||||
addr.tp.rx_id = 0x18DAF142 | CAN_EFF_FLAG;
|
||||
|
||||
ret = bind(s, (struct sockaddr *)&addr, sizeof(addr));
|
||||
if (ret < 0)
|
||||
exit(1);
|
||||
|
||||
/* Data can now be received using read(s, ...) and sent using write(s, ...) */
|
||||
|
||||
Additional examples
|
||||
-------------------
|
||||
|
||||
More complete (and complex) examples can be found inside the ``isotp*`` userland
|
||||
tools, distributed as part of the ``can-utils`` utilities at:
|
||||
https://github.com/linux-can/can-utils
|
||||
@ -4842,6 +4842,7 @@ W: https://github.com/linux-can
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
|
||||
F: Documentation/networking/can.rst
|
||||
F: Documentation/networking/iso15765-2.rst
|
||||
F: include/linux/can/can-ml.h
|
||||
F: include/linux/can/core.h
|
||||
F: include/linux/can/skb.h
|
||||
|
||||
Loading…
Reference in New Issue
Block a user