ASoC: Updates for v3.18

- More componentisation work from Lars-Peter, this time mainly
    cleaning up the suspend and bias level transition callbacks.
  - Real system support for the Intel drivers and a bunch of fixes and
    enhancements for the associated CODEC drivers, this is going to need
    a lot quirks over time due to the lack of any firmware description of
    the boards.
  - Jack detect support for simple card from Dylan Reid.
  - A bunch of small fixes and enhancements for the Freescale drivers.
  - New drivers for Analog Devices SSM4567, Cirrus Logic CS35L32, Everest
    Semiconductor ES8328 and Freescale cards using the ASRC in newer i.MX
    processors.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUMoHRAAoJECTWi3JdVIfQGXUH/RWQ6/Ey70SPgUdWWQ42PFey
 sBq/Hl69F8/JNxW6EDA4GEg6ue880Gek0oGqioxtN6Ku0Vm/WSqDWnKcTAGl4dDO
 AefC4FwekZWCYQi3VTNIvMEqfUWkcofTLVwjdh/PUZxniahkiGA81UJ1mQNXBxLF
 UusrK0fIAxQgiNsCcPZ94knJiqZVBWgbRv/mCXY9K1/jqITNKd/ZVEMkOPk/p00q
 cH9LIx8EknRV3HyJNZQ0xpmhpuMzLy6Agf7Oeq/m5kDqq1stmClvibPYkdqkdkto
 jYwKaPh18dNHlUmm1w/G7X20kCidhbiwRjS/iIzx3cfIrWkiz90/BSRFKs8pqSo=
 =7PPg
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.18

 - More componentisation work from Lars-Peter, this time mainly
   cleaning up the suspend and bias level transition callbacks.
 - Real system support for the Intel drivers and a bunch of fixes and
   enhancements for the associated CODEC drivers, this is going to need
   a lot quirks over time due to the lack of any firmware description of
   the boards.
 - Jack detect support for simple card from Dylan Reid.
 - A bunch of small fixes and enhancements for the Freescale drivers.
 - New drivers for Analog Devices SSM4567, Cirrus Logic CS35L32, Everest
   Semiconductor ES8328 and Freescale cards using the ASRC in newer i.MX
   processors.

Documentation/DocBook/media/v4l/compat.xml

@@ -2545,6 +2545,30 @@ fields changed from _s32 to _u32.
       </orderedlist>
     </section>
 
+    <section>
+      <title>V4L2 in Linux 3.16</title>
+      <orderedlist>
+        <listitem>
+	  <para>Added event V4L2_EVENT_SOURCE_CHANGE.
+	  </para>
+        </listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 3.17</title>
+      <orderedlist>
+        <listitem>
+	  <para>Extended &v4l2-pix-format;. Added format flags.
+	  </para>
+        </listitem>
+        <listitem>
+	  <para>Added compound control types and &VIDIOC-QUERY-EXT-CTRL;.
+	  </para>
+        </listitem>
+      </orderedlist>
+    </section>
+
     <section id="other">
       <title>Relation of V4L2 to other Linux multimedia APIs</title>
 

Documentation/DocBook/media/v4l/func-poll.xml

@@ -29,9 +29,12 @@ can suspend execution until the driver has captured data or is ready
 to accept data for output.</para>
 
     <para>When streaming I/O has been negotiated this function waits
-until a buffer has been filled or displayed and can be dequeued with
+until a buffer has been filled by the capture device and can be dequeued
-the &VIDIOC-DQBUF; ioctl. When buffers are already in the outgoing
+with the &VIDIOC-DQBUF; ioctl. For output devices this function waits
-queue of the driver the function returns immediately.</para>
+until the device is ready to accept a new buffer to be queued up with
+the &VIDIOC-QBUF; ioctl for display. When buffers are already in the outgoing
+queue of the driver (capture) or the incoming queue isn't full (display)
+the function returns immediately.</para>
 
     <para>On success <function>poll()</function> returns the number of
 file descriptors that have been selected (that is, file descriptors
@@ -44,10 +47,22 @@ Capture devices set the <constant>POLLIN</constant> and
 flags. When the function timed out it returns a value of zero, on
 failure it returns <returnvalue>-1</returnvalue> and the
 <varname>errno</varname> variable is set appropriately. When the
-application did not call &VIDIOC-QBUF; or &VIDIOC-STREAMON; yet the
+application did not call &VIDIOC-STREAMON; the
 <function>poll()</function> function succeeds, but sets the
 <constant>POLLERR</constant> flag in the
-<structfield>revents</structfield> field.</para>
+<structfield>revents</structfield> field. When the
+application has called &VIDIOC-STREAMON; for a capture device but hasn't
+yet called &VIDIOC-QBUF;, the <function>poll()</function> function
+succeeds and sets the <constant>POLLERR</constant> flag in the
+<structfield>revents</structfield> field. For output devices this
+same situation will cause <function>poll()</function> to succeed
+as well, but it sets the <constant>POLLOUT</constant> and
+<constant>POLLWRNORM</constant> flags in the <structfield>revents</structfield>
+field.</para>
+
+    <para>If an event occurred (see &VIDIOC-DQEVENT;) then
+<constant>POLLPRI</constant> will be set in the <structfield>revents</structfield>
+field and <function>poll()</function> will return.</para>
 
     <para>When use of the <function>read()</function> function has
 been negotiated and the driver does not capture yet, the
@@ -58,10 +73,18 @@ continuously (as opposed to, for example, still images) the function
 may return immediately.</para>
 
     <para>When use of the <function>write()</function> function has
-been negotiated the <function>poll</function> function just waits
+been negotiated and the driver does not stream yet, the
+<function>poll</function> function starts streaming. When that fails
+it returns a <constant>POLLERR</constant> as above. Otherwise it waits
 until the driver is ready for a non-blocking
 <function>write()</function> call.</para>
 
+    <para>If the caller is only interested in events (just
+<constant>POLLPRI</constant> is set in the <structfield>events</structfield>
+field), then <function>poll()</function> will <emphasis>not</emphasis>
+start streaming if the driver does not stream yet. This makes it
+possible to just poll for events and not for buffers.</para>
+
     <para>All drivers implementing the <function>read()</function> or
 <function>write()</function> function or streaming I/O must also
 support the <function>poll()</function> function.</para>

Documentation/DocBook/media/v4l/v4l2.xml

@@ -152,10 +152,11 @@ structs, ioctls) must be noted in more detail in the history chapter
 applications. -->
 
       <revision>
-	<revnumber>3.16</revnumber>
+	<revnumber>3.17</revnumber>
-	<date>2014-05-27</date>
+	<date>2014-08-04</date>
-	<authorinitials>lp</authorinitials>
+	<authorinitials>lp, hv</authorinitials>
-	<revremark>Extended &v4l2-pix-format;. Added format flags.
+	<revremark>Extended &v4l2-pix-format;. Added format flags. Added compound control types
+and VIDIOC_QUERY_EXT_CTRL.
 	</revremark>
       </revision>
 
@@ -538,7 +539,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 3.14</subtitle>
+ <subtitle>Revision 3.17</subtitle>
 
   <chapter id="common">
     &sub-common;

Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml

@@ -119,7 +119,7 @@
 	  </row>
 	  <row>
 	    <entry>&v4l2-rect;</entry>
-	    <entry><structfield>rect</structfield></entry>
+	    <entry><structfield>r</structfield></entry>
 	    <entry>Selection rectangle, in pixels.</entry>
 	  </row>
 	  <row>

Documentation/SubmittingPatches

@@ -794,6 +794,7 @@ Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer".
   <http://www.kroah.com/log/linux/maintainer-03.html>
   <http://www.kroah.com/log/linux/maintainer-04.html>
   <http://www.kroah.com/log/linux/maintainer-05.html>
+  <http://www.kroah.com/log/linux/maintainer-06.html>
 
 NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!
   <https://lkml.org/lkml/2005/7/11/336>

Documentation/cgroups/cpusets.txt

@@ -345,14 +345,14 @@ the named feature on.
 The implementation is simple.
 
 Setting the flag 'cpuset.memory_spread_page' turns on a per-process flag
-PF_SPREAD_PAGE for each task that is in that cpuset or subsequently
+PFA_SPREAD_PAGE for each task that is in that cpuset or subsequently
 joins that cpuset.  The page allocation calls for the page cache
-is modified to perform an inline check for this PF_SPREAD_PAGE task
+is modified to perform an inline check for this PFA_SPREAD_PAGE task
 flag, and if set, a call to a new routine cpuset_mem_spread_node()
 returns the node to prefer for the allocation.
 
 Similarly, setting 'cpuset.memory_spread_slab' turns on the flag
-PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
+PFA_SPREAD_SLAB, and appropriately marked slab caches will allocate
 pages from the node returned by cpuset_mem_spread_node().
 
 The cpuset_mem_spread_node() routine is also simple.  It uses the

Documentation/devicetree/bindings/dma/rcar-audmapp.txt

@@ -16,9 +16,9 @@ Example:
 * DMA client
 
 Required properties:
-- dmas:		a list of <[DMA multiplexer phandle] [SRS/DRS value]> pairs,
+- dmas:		a list of <[DMA multiplexer phandle] [SRS << 8 | DRS]> pairs.
-		where SRS/DRS values are fixed handles, specified in the SoC
+		where SRS/DRS are specified in the SoC manual.
-		manual as the value that would be written into the PDMACHCR.
+		It will be written into PDMACHCR as high 16-bit parts.
 - dma-names:	a list of DMA channel names, one per "dmas" entry
 
 Example:

Documentation/devicetree/bindings/input/atmel,maxtouch.txt

@@ -11,10 +11,17 @@ Required properties:
 
 Optional properties for main touchpad device:
 
-- linux,gpio-keymap: An array of up to 4 entries indicating the Linux
+- linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages
-    keycode generated by each GPIO. Linux keycodes are defined in
+    on GPIO bit changes. An array of up to 8 entries can be provided
+    indicating the Linux keycode mapped to each bit of the status byte,
+    starting at the LSB. Linux keycodes are defined in
     <dt-bindings/input/input.h>.
 
+    Note: the numbering of the GPIOs and the bit they start at varies between
+    maXTouch devices. You must either refer to the documentation, or
+    experiment to determine which bit corresponds to which input. Use
+    KEY_RESERVED for unused padding values.
+
 Example:
 
 	touch@4b {

Documentation/devicetree/bindings/net/stmmac.txt

@@ -39,6 +39,10 @@ Optional properties:
   further clocks may be specified in derived bindings.
 - clock-names: One name for each entry in the clocks property, the
   first one should be "stmmaceth".
+- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
+  available this clock is used for programming the Timestamp Addend Register.
+  If not passed then the system clock will be used and this is fine on some
+  platforms.
 
 Examples:
 

Documentation/devicetree/bindings/regmap/regmap.txt

@@ -0,0 +1,47 @@
+Device-Tree binding for regmap
+
+The endianness mode of CPU & Device scenarios:
+Index     Device     Endianness properties
+---------------------------------------------------
+1         BE         'big-endian'
+2         LE         'little-endian'
+
+For one device driver, which will run in different scenarios above
+on different SoCs using the devicetree, we need one way to simplify
+this.
+
+Required properties:
+- {big,little}-endian: these are boolean properties, if absent
+  meaning that the CPU and the Device are in the same endianness mode,
+  these properties are for register values and all the buffers only.
+
+Examples:
+Scenario 1 : CPU in LE mode & device in LE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+};
+
+Scenario 2 : CPU in LE mode & device in BE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+	      big-endian;
+};
+
+Scenario 3 : CPU in BE mode & device in BE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+};
+
+Scenario 4 : CPU in BE mode & device in LE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+	      little-endian;
+};

Documentation/devicetree/bindings/regulator/tps65090.txt

@@ -45,8 +45,8 @@ Example:
 		infet5-supply = <&some_reg>;
 		infet6-supply = <&some_reg>;
 		infet7-supply = <&some_reg>;
-		vsys_l1-supply = <&some_reg>;
+		vsys-l1-supply = <&some_reg>;
-		vsys_l2-supply = <&some_reg>;
+		vsys-l2-supply = <&some_reg>;
 
 		regulators {
 			dcdc1 {

Documentation/devicetree/bindings/sound/adi,ssm2602.txt

@@ -0,0 +1,19 @@
+Analog Devices SSM2602, SSM2603 and SSM2604 I2S audio CODEC devices
+
+SSM2602 support both I2C and SPI as the configuration interface,
+the selection is made by the MODE strap-in pin.
+SSM2603 and SSM2604 only support I2C as the configuration interface.
+
+Required properties:
+
+  - compatible : One of "adi,ssm2602", "adi,ssm2603" or "adi,ssm2604"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+ Example:
+
+	ssm2602: ssm2602@1a {
+		compatible = "adi,ssm2602";
+		reg = <0x1a>;
+	};

Documentation/devicetree/bindings/sound/cs35l32.txt

@@ -0,0 +1,62 @@
+CS35L32 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs35l32"
+
+  - reg : the I2C address of the device for I2C. Address is determined by the level
+  of the AD0 pin. Level 0 is 0x40 while Level 1 is 0x41.
+
+  - VA-supply, VP-supply : power supplies for the device,
+  as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Optional properties:
+
+  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
+  deasserted before communication to the codec starts.
+
+  - cirrus,boost-manager : Boost voltage control.
+  0 = Automatically managed.  Boost-converter output voltage is the higher
+  of the two: Class G or adaptive LED voltage.
+  1 = Automatically managed irrespective of audio, adapting for low-power
+  dissipation when LEDs are ON, and operating in Fixed-Boost Bypass Mode
+  if LEDs are OFF (VBST = VP).
+  2 = (Default) Boost voltage fixed in Bypass Mode (VBST = VP).
+  3 = Boost voltage fixed at 5 V.
+
+  - cirrus,sdout-datacfg : Data configuration for dual CS35L32 applications only.
+  Determines the data packed in a two-CS35L32 configuration.
+  0 = Left/right channels VMON[11:0], IMON[11:0], VPMON[7:0].
+  1 = Left/right channels VMON[11:0], IMON[11:0], STATUS.
+  2 = (Default) left/right channels VMON[15:0], IMON [15:0].
+  3 = Left/right channels VPMON[7:0], STATUS.
+
+  - cirrus,sdout-share : SDOUT sharing. Determines whether one or two CS35L32
+  devices are on board sharing SDOUT.
+  0 = (Default) One IC.
+  1 = Two IC's.
+
+  - cirrus,battery-recovery : Low battery nominal recovery threshold, rising VP.
+  0 = 3.1V
+  1 = 3.2V
+  2 = 3.3V (Default)
+  3 = 3.4V
+
+  - cirrus,battery-threshold : Low battery nominal threshold, falling VP.
+  0 = 3.1V
+  1 = 3.2V
+  2 = 3.3V
+  3 = 3.4V (Default)
+  4 = 3.5V
+  5 = 3.6V
+
+Example:
+
+codec: codec@40 {
+	compatible = "cirrus,cs35l32";
+	reg = <0x40>;
+	reset-gpios = <&gpio 10 0>;
+	cirrus,boost-manager = <0x03>;
+	cirrus,sdout-datacfg = <0x02>;
+	VA-supply = <&reg_audio>;
+};

Documentation/devicetree/bindings/sound/es8328.txt

@@ -0,0 +1,38 @@
+Everest ES8328 audio CODEC
+
+This device supports both I2C and SPI.
+
+Required properties:
+
+  - compatible : "everest,es8328"
+  - DVDD-supply : Regulator providing digital core supply voltage 1.8 - 3.6V
+  - AVDD-supply : Regulator providing analog supply voltage 3.3V
+  - PVDD-supply : Regulator providing digital IO supply voltage 1.8 - 3.6V
+  - IPVDD-supply : Regulator providing analog output voltage 3.3V
+  - clocks : A 22.5792 or 11.2896 MHz clock
+  - reg : the I2C address of the device for I2C, the chip select number for SPI
+
+Pins on the device (for linking into audio routes):
+
+  * LOUT1
+  * LOUT2
+  * ROUT1
+  * ROUT2
+  * LINPUT1
+  * RINPUT1
+  * LINPUT2
+  * RINPUT2
+  * Mic Bias
+
+
+Example:
+
+codec: es8328@11 {
+	compatible = "everest,es8328";
+	DVDD-supply = <&reg_3p3v>;
+	AVDD-supply = <&reg_3p3v>;
+	PVDD-supply = <&reg_3p3v>;
+	HPVDD-supply = <&reg_3p3v>;
+	clocks = <&clks 169>;
+	reg = <0x11>;
+};

Documentation/devicetree/bindings/sound/fsl,esai.txt

@@ -7,7 +7,8 @@ other DSPs. It has up to six transmitters and four receivers.
 
 Required properties:
 
-  - compatible : Compatible list, must contain "fsl,imx35-esai".
+  - compatible : Compatible list, must contain "fsl,imx35-esai" or
+		 "fsl,vf610-esai"
 
   - reg : Offset and length of the register set for the device.
 

Documentation/devicetree/bindings/sound/fsl,ssi.txt

@@ -58,13 +58,7 @@ Optional properties:
 		    Documentation/devicetree/bindings/dma/dma.txt.
 - dma-names:	    Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq
 		    is not defined.
-- fsl,mode:         The operating mode for the SSI interface.
+- fsl,mode:         The operating mode for the AC97 interface only.
-                    "i2s-slave" - I2S mode, SSI is clock slave
-                    "i2s-master" - I2S mode, SSI is clock master
-                    "lj-slave" - left-justified mode, SSI is clock slave
-                    "lj-master" - l.j. mode, SSI is clock master
-                    "rj-slave" - right-justified mode, SSI is clock slave
-                    "rj-master" - r.j., SSI is clock master
                     "ac97-slave" - AC97 mode, SSI is clock slave
                     "ac97-master" - AC97 mode, SSI is clock master
 

Documentation/devicetree/bindings/sound/fsl-asoc-card.txt

@@ -0,0 +1,82 @@
+Freescale Generic ASoC Sound Card with ASRC support
+
+The Freescale Generic ASoC Sound Card can be used, ideally, for all Freescale
+SoCs connecting with external CODECs.
+
+The idea of this generic sound card is a bit like ASoC Simple Card. However,
+for Freescale SoCs (especially those released in recent years), most of them
+have ASRC (Documentation/devicetree/bindings/sound/fsl,asrc.txt) inside. And
+this is a specific feature that might be painstakingly controlled and merged
+into the Simple Card.
+
+So having this generic sound card allows all Freescale SoC users to benefit
+from the simplification of a new card support and the capability of the wide
+sample rates support through ASRC.
+
+Note: The card is initially designed for those sound cards who use I2S and
+      PCM DAI formats. However, it'll be also possible to support those non
+      I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as long
+      as the driver has been properly upgraded.
+
+
+The compatible list for this generic sound card currently:
+ "fsl,imx-audio-cs42888"
+
+ "fsl,imx-audio-wm8962"
+ (compatible with Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt)
+
+ "fsl,imx-audio-sgtl5000"
+ (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt)
+
+Required properties:
+
+  - compatible		: Contains one of entries in the compatible list.
+
+  - model		: The user-visible name of this sound complex
+
+  - audio-cpu		: The phandle of an CPU DAI controller
+
+  - audio-codec		: The phandle of an audio codec
+
+  - audio-routing	: A list of the connections between audio components.
+			  Each entry is a pair of strings, the first being the
+			  connection's sink, the second being the connection's
+			  source. There're a few pre-designed board connectors:
+			   * Line Out Jack
+			   * Line In Jack
+			   * Headphone Jack
+			   * Mic Jack
+			   * Ext Spk
+			   * AMIC (stands for Analog Microphone Jack)
+			   * DMIC (stands for Digital Microphone Jack)
+
+			  Note: The "Mic Jack" and "AMIC" are redundant while
+			        coexsiting in order to support the old bindings
+				of wm8962 and sgtl5000.
+
+Optional properties:
+
+  - audio-asrc		: The phandle of ASRC. It can be absent if there's no
+			  need to add ASRC support via DPCM.
+
+Example:
+sound-cs42888 {
+	compatible = "fsl,imx-audio-cs42888";
+	model = "cs42888-audio";
+	audio-cpu = <&esai>;
+	audio-asrc = <&asrc>;
+	audio-codec = <&cs42888>;
+	audio-routing =
+		"Line Out Jack", "AOUT1L",
+		"Line Out Jack", "AOUT1R",
+		"Line Out Jack", "AOUT2L",
+		"Line Out Jack", "AOUT2R",
+		"Line Out Jack", "AOUT3L",
+		"Line Out Jack", "AOUT3R",
+		"Line Out Jack", "AOUT4L",
+		"Line Out Jack", "AOUT4R",
+		"AIN1L", "Line In Jack",
+		"AIN1R", "Line In Jack",
+		"AIN2L", "Line In Jack",
+		"AIN2R", "Line In Jack";
+};

Documentation/devicetree/bindings/sound/fsl-sai.txt

@@ -18,12 +18,26 @@ Required properties:
 - pinctrl-names: Must contain a "default" entry.
 - pinctrl-NNN: One property must exist for each entry in pinctrl-names.
   See ../pinctrl/pinctrl-bindings.txt for details of the property values.
-- big-endian-regs: If this property is absent, the little endian mode will
+- big-endian: Boolean property, required if all the FTM_PWM registers
-  be in use as default, or the big endian mode will be in use for all the
+  are big-endian rather than little-endian.
-  device registers.
+- lsb-first: Configures whether the LSB or the MSB is transmitted first for
-- big-endian-data: If this property is absent, the little endian mode will
+  the fifo data. If this property is absent, the MSB is transmitted first as
-  be in use as default, or the big endian mode will be in use for all the
+  default, or the LSB is transmitted first.
-  fifo data.
+- fsl,sai-synchronous-rx: This is a boolean property. If present, indicating
+  that SAI will work in the synchronous mode (sync Tx with Rx) which means
+  both the transimitter and receiver will send and receive data by following
+  receiver's bit clocks and frame sync clocks.
+- fsl,sai-asynchronous: This is a boolean property. If present, indicating
+  that SAI will work in the asynchronous mode, which means both transimitter
+  and receiver will send and receive data by following their own bit clocks
+  and frame sync clocks separately.
+
+Note:
+- If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
+  default synchronous mode (sync Rx with Tx) will be used, which means both
+  transimitter and receiver will send and receive data by following clocks
+  of transimitter.
+- fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive.
 
 Example:
 sai2: sai@40031000 {
@@ -38,6 +52,6 @@ sai2: sai@40031000 {
 	      dma-names = "tx", "rx";
 	      dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
 		   <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
-	      big-endian-regs;
+	      big-endian;
-	      big-endian-data;
+	      lsb-first;
 };

Documentation/devicetree/bindings/sound/imx-audio-es8328.txt

@@ -0,0 +1,60 @@
+Freescale i.MX audio complex with ES8328 codec
+
+Required properties:
+- compatible       : "fsl,imx-audio-es8328"
+- model            : The user-visible name of this sound complex
+- ssi-controller   : The phandle of the i.MX SSI controller
+- jack-gpio        : Optional GPIO for headphone jack
+- audio-amp-supply : Power regulator for speaker amps
+- audio-codec      : The phandle of the ES8328 audio codec
+- audio-routing    : A list of the connections between audio components.
+                     Each entry is a pair of strings, the first being the
+		     connection's sink, the second being the connection's
+		     source. Valid names could be power supplies, ES8328
+		     pins, and the jacks on the board:
+
+			Power supplies:
+			   * audio-amp
+
+			ES8328 pins:
+			   * LOUT1
+			   * LOUT2
+			   * ROUT1
+			   * ROUT2
+			   * LINPUT1
+			   * LINPUT2
+			   * RINPUT1
+			   * RINPUT2
+			   * Mic PGA
+
+			Board connectors:
+			   * Headphone
+			   * Speaker
+			   * Mic Jack
+- mux-int-port     : The internal port of the i.MX audio muxer (AUDMUX)
+- mux-ext-port     : The external port of the i.MX audio muxer (AUDMIX)
+
+Note: The AUDMUX port numbering should start at 1, which is consistent with
+hardware manual.
+
+Example:
+
+sound {
+	compatible = "fsl,imx-audio-es8328";
+	model = "imx-audio-es8328";
+	ssi-controller = <&ssi1>;
+	audio-codec = <&codec>;
+	jack-gpio = <&gpio5 15 0>;
+	audio-amp-supply = <&reg_audio_amp>;
+	audio-routing =
+		"Speaker", "LOUT2",
+		"Speaker", "ROUT2",
+		"Speaker", "audio-amp",
+		"Headphone", "ROUT1",
+		"Headphone", "LOUT1",
+		"LINPUT1", "Mic Jack",
+		"RINPUT1", "Mic Jack",
+		"Mic Jack", "Mic Bias";
+	mux-int-port = <1>;
+	mux-ext-port = <3>;
+};

Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt

@@ -25,6 +25,7 @@ Required properties:
 
 Optional properties:
 - nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
+- nvidia,mic-det-gpios : The GPIO that detect microphones are plugged in
 
 Example:
 

Documentation/devicetree/bindings/sound/rockchip-i2s.txt

@@ -31,7 +31,7 @@ i2s@ff890000 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	dmas = <&pdma1 0>, <&pdma1 1>;
-	dma-names = "rx", "tx";
+	dma-names = "tx", "rx";
 	clock-names = "i2s_hclk", "i2s_clk";
 	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
 };

Documentation/devicetree/bindings/sound/rt5677.txt

@@ -0,0 +1,59 @@
+RT5677 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5677".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+- gpio-controller : Indicates this device is a GPIO controller.
+
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters (currently unused).
+
+Optional properties:
+
+- realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin.
+
+- realtek,in1-differential
+- realtek,in2-differential
+- realtek,lout1-differential
+- realtek,lout2-differential
+- realtek,lout3-differential
+  Boolean. Indicate MIC1/2 input and LOUT1/2/3 outputs are differential,
+  rather than single-ended.
+
+Pins on the device (for linking into audio routes):
+
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * MICBIAS1
+  * DMIC1
+  * DMIC2
+  * DMIC3
+  * DMIC4
+  * LOUT1
+  * LOUT2
+  * LOUT3
+
+Example:
+
+rt5677 {
+	compatible = "realtek,rt5677";
+	reg = <0x2c>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	realtek,pow-ldo2-gpio =
+		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+	realtek,in1-differential = "true";
+};

Documentation/devicetree/bindings/sound/simple-card.txt

@@ -17,6 +17,10 @@ Optional properties:
 					  source.
 - simple-audio-card,mclk-fs             : Multiplication factor between stream rate and codec
   					  mclk.
+- simple-audio-card,hp-det-gpio		: Reference to GPIO that signals when
+					  headphones are attached.
+- simple-audio-card,mic-det-gpio	: Reference to GPIO that signals when
+					  a microphone is attached.
 
 Optional subnodes:
 

Documentation/devicetree/bindings/sound/ssm4567.txt

@@ -0,0 +1,15 @@
+Analog Devices SSM4567 audio amplifier
+
+This device supports I2C only.
+
+Required properties:
+  - compatible : Must be "adi,ssm4567"
+  - reg : the I2C address of the device. This will either be 0x34 (LR_SEL/ADDR connected to AGND),
+	0x35 (LR_SEL/ADDR connected to IOVDD) or 0x36 (LR_SEL/ADDR open).
+
+Example:
+
+	ssm4567: ssm4567@34 {
+		compatible = "adi,ssm4567";
+		reg = <0x34>;
+	};

Documentation/devicetree/bindings/spi/spi-rockchip.txt

@@ -16,11 +16,15 @@ Required Properties:
 - clocks: Must contain an entry for each entry in clock-names.
 - clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
 			   the peripheral clock.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Optional Properties:
+
 - dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
 		Documentation/devicetree/bindings/dma/dma.txt
 - dma-names: DMA request names should include "tx" and "rx" if present.
-- #address-cells: should be 1.
+
-- #size-cells: should be 0.
 
 Example:
 

Documentation/devicetree/bindings/staging/imx-drm/ldb.txt

@@ -56,6 +56,9 @@ Required properties:
  - fsl,data-width : should be <18> or <24>
  - port: A port node with endpoint definitions as defined in
    Documentation/devicetree/bindings/media/video-interfaces.txt.
+   On i.MX5, the internal two-input-multiplexer is used.
+   Due to hardware limitations, only one port (port@[0,1])
+   can be used for each channel (lvds-channel@[0,1], respectively)
    On i.MX6, there should be four ports (port@[0-3]) that correspond
    to the four LVDS multiplexer inputs.
 
@@ -78,6 +81,8 @@ ldb: ldb@53fa8008 {
 		      "di0", "di1";
 
 	lvds-channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		reg = <0>;
 		fsl,data-mapping = "spwg";
 		fsl,data-width = <24>;
@@ -86,7 +91,9 @@ ldb: ldb@53fa8008 {
 			/* ... */
 		};
 
-		port {
+		port@0 {
+			reg = <0>;
+
 			lvds0_in: endpoint {
 				remote-endpoint = <&ipu_di0_lvds0>;
 			};
@@ -94,6 +101,8 @@ ldb: ldb@53fa8008 {
 	};
 
 	lvds-channel@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		reg = <1>;
 		fsl,data-mapping = "spwg";
 		fsl,data-width = <24>;
@@ -102,7 +111,9 @@ ldb: ldb@53fa8008 {
 			/* ... */
 		};
 
-		port {
+		port@1 {
+			reg = <1>;
+
 			lvds1_in: endpoint {
 				remote-endpoint = <&ipu_di1_lvds1>;
 			};

Documentation/devicetree/bindings/usb/mxs-phy.txt

@@ -5,6 +5,7 @@ Required properties:
 	* "fsl,imx23-usbphy" for imx23 and imx28
 	* "fsl,imx6q-usbphy" for imx6dq and imx6dl
 	* "fsl,imx6sl-usbphy" for imx6sl
+	* "fsl,imx6sx-usbphy" for imx6sx
   "fsl,imx23-usbphy" is still a fallback for other strings
 - reg: Should contain registers location and length
 - interrupts: Should contain phy interrupt

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -48,6 +48,7 @@ epfl	Ecole Polytechnique Fédérale de Lausanne
 epson	Seiko Epson Corp.
 est	ESTeem Wireless Modems
 eukrea  Eukréa Electromatique
+everest	Everest Semiconductor Co. Ltd.
 excito	Excito
 fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.

Documentation/devicetree/bindings/video/analog-tv-connector.txt

@@ -2,7 +2,7 @@ Analog TV Connector
 ===================
 
 Required properties:
-- compatible: "composite-connector" or "svideo-connector"
+- compatible: "composite-video-connector" or "svideo-connector"
 
 Optional properties:
 - label: a symbolic name for the connector
@@ -14,7 +14,7 @@ Example
 -------
 
 tv: connector {
-	compatible = "composite-connector";
+	compatible = "composite-video-connector";
 	label = "tv";
 
 	port {

Documentation/devicetree/of_selftest.txt

@@ -0,0 +1,211 @@
+Open Firmware Device Tree Selftest
+----------------------------------
+
+Author: Gaurav Minocha <gaurav.minocha.os@gmail.com>
+
+1. Introduction
+
+This document explains how the test data required for executing OF selftest
+is attached to the live tree dynamically, independent of the machine's
+architecture.
+
+It is recommended to read the following documents before moving ahead.
+
+[1] Documentation/devicetree/usage-model.txt
+[2] http://www.devicetree.org/Device_Tree_Usage
+
+OF Selftest has been designed to test the interface (include/linux/of.h)
+provided to device driver developers to fetch the device information..etc.
+from the unflattened device tree data structure. This interface is used by
+most of the device drivers in various use cases.
+
+
+2. Test-data
+
+The Device Tree Source file (drivers/of/testcase-data/testcases.dts) contains
+the test data required for executing the unit tests automated in
+drivers/of/selftests.c. Currently, following Device Tree Source Include files
+(.dtsi) are included in testcase.dts:
+
+drivers/of/testcase-data/tests-interrupts.dtsi
+drivers/of/testcase-data/tests-platform.dtsi
+drivers/of/testcase-data/tests-phandle.dtsi
+drivers/of/testcase-data/tests-match.dtsi
+
+When the kernel is build with OF_SELFTEST enabled, then the following make rule
+
+$(obj)/%.dtb: $(src)/%.dts FORCE
+	$(call if_changed_dep, dtc)
+
+is used to compile the DT source file (testcase.dts) into a binary blob
+(testcase.dtb), also referred as flattened DT.
+
+After that, using the following rule the binary blob above is wrapped as an
+assembly file (testcase.dtb.S).
+
+$(obj)/%.dtb.S: $(obj)/%.dtb
+	$(call cmd, dt_S_dtb)
+
+The assembly file is compiled into an object file (testcase.dtb.o), and is
+linked into the kernel image.
+
+
+2.1. Adding the test data
+
+Un-flattened device tree structure:
+
+Un-flattened device tree consists of connected device_node(s) in form of a tree
+structure described below.
+
+// following struct members are used to construct the tree
+struct device_node {
+    ...
+    struct  device_node *parent;
+    struct  device_node *child;
+    struct  device_node *sibling;
+    struct  device_node *allnext;   /* next in list of all nodes */
+    ...
+ };
+
+Figure 1, describes a generic structure of machine’s un-flattened device tree
+considering only child and sibling pointers. There exists another pointer,
+*parent, that is used to traverse the tree in the reverse direction. So, at
+a particular level the child node and all the sibling nodes will have a parent
+pointer pointing to a common node (e.g. child1, sibling2, sibling3, sibling4’s
+parent points to root node)
+
+root (‘/’)
+   |
+child1 -> sibling2 -> sibling3 -> sibling4 -> null
+   |         |           |           |
+   |         |           |          null
+   |         |           |
+   |         |        child31 -> sibling32 -> null
+   |         |           |          |
+   |         |          null       null
+   |         |
+   |      child21 -> sibling22 -> sibling23 -> null
+   |         |          |            |
+   |        null       null         null
+   |
+child11 -> sibling12 -> sibling13 -> sibling14 -> null
+   |           |           |            |
+   |           |           |           null
+   |           |           |
+  null        null       child131 -> null
+                           |
+                          null
+
+Figure 1: Generic structure of un-flattened device tree
+
+
+*allnext: it is used to link all the nodes of DT into a list. So, for the
+ above tree the list would be as follows:
+
+root->child1->child11->sibling12->sibling13->child131->sibling14->sibling2->
+child21->sibling22->sibling23->sibling3->child31->sibling32->sibling4->null
+
+Before executing OF selftest, it is required to attach the test data to
+machine's device tree (if present). So, when selftest_data_add() is called,
+at first it reads the flattened device tree data linked into the kernel image
+via the following kernel symbols:
+
+__dtb_testcases_begin - address marking the start of test data blob
+__dtb_testcases_end   - address marking the end of test data blob
+
+Secondly, it calls of_fdt_unflatten_device_tree() to unflatten the flattened
+blob. And finally, if the machine’s device tree (i.e live tree) is present,
+then it attaches the unflattened test data tree to the live tree, else it
+attaches itself as a live device tree.
+
+attach_node_and_children() uses of_attach_node() to attach the nodes into the
+live tree as explained below. To explain the same, the test data tree described
+ in Figure 2 is attached to the live tree described in Figure 1.
+
+root (‘/’)
+    |
+ testcase-data
+    |
+ test-child0 -> test-sibling1 -> test-sibling2 -> test-sibling3 -> null
+    |               |                |                |
+ test-child01      null             null             null
+
+
+allnext list:
+
+root->testcase-data->test-child0->test-child01->test-sibling1->test-sibling2
+->test-sibling3->null
+
+Figure 2: Example test data tree to be attached to live tree.
+
+According to the scenario above, the live tree is already present so it isn’t
+required to attach the root(‘/’) node. All other nodes are attached by calling
+of_attach_node() on each node.
+
+In the function of_attach_node(), the new node is attached as the child of the
+given parent in live tree. But, if parent already has a child then the new node
+replaces the current child and turns it into its sibling. So, when the testcase
+data node is attached to the live tree above (Figure 1), the final structure is
+ as shown in Figure 3.
+
+root (‘/’)
+   |
+testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
+   |               |          |           |           |
+ (...)             |          |           |          null
+                   |          |         child31 -> sibling32 -> null
+                   |          |           |           |
+                   |          |          null        null
+                   |          |
+                   |        child21 -> sibling22 -> sibling23 -> null
+                   |          |           |            |
+                   |         null        null         null
+                   |
+                child11 -> sibling12 -> sibling13 -> sibling14 -> null
+                   |          |            |            |
+                  null       null          |           null
+                                           |
+                                        child131 -> null
+                                           |
+                                          null
+-----------------------------------------------------------------------
+
+root (‘/’)
+   |
+testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
+   |               |          |           |           |
+   |             (...)      (...)       (...)        null
+   |
+test-sibling3 -> test-sibling2 -> test-sibling1 -> test-child0 -> null
+   |                |                   |                |
+  null             null                null         test-child01
+
+
+Figure 3: Live device tree structure after attaching the testcase-data.
+
+
+Astute readers would have noticed that test-child0 node becomes the last
+sibling compared to the earlier structure (Figure 2). After attaching first
+test-child0 the test-sibling1 is attached that pushes the child node
+(i.e. test-child0) to become a sibling and makes itself a child node,
+ as mentioned above.
+
+If a duplicate node is found (i.e. if a node with same full_name property is
+already present in the live tree), then the node isn’t attached rather its
+properties are updated to the live tree’s node by calling the function
+update_node_properties().
+
+
+2.2. Removing the test data
+
+Once the test case execution is complete, selftest_data_remove is called in
+order to remove the device nodes attached initially (first the leaf nodes are
+detached and then moving up the parent nodes are removed, and eventually the
+whole tree). selftest_data_remove() calls detach_node_and_children() that uses
+of_detach_node() to detach the nodes from the live device tree.
+
+To detach a node, of_detach_node() first updates all_next linked list, by
+attaching the previous node’s allnext to current node’s allnext pointer. And
+then, it either updates the child pointer of given node’s parent to its
+sibling or attaches the previous sibling to the given node’s sibling, as
+appropriate. That is it :)

Documentation/filesystems/nfs/nfs-rdma.txt

@@ -138,9 +138,9 @@ Installation
   - Build, install, reboot
 
     The NFS/RDMA code will be enabled automatically if NFS and RDMA
-    are turned on. The NFS/RDMA client and server are configured via the hidden
+    are turned on. The NFS/RDMA client and server are configured via the
-    SUNRPC_XPRT_RDMA config option that depends on SUNRPC and INFINIBAND. The
+    SUNRPC_XPRT_RDMA_CLIENT and SUNRPC_XPRT_RDMA_SERVER config options that both
-    value of SUNRPC_XPRT_RDMA will be:
+    depend on SUNRPC and INFINIBAND. The default value of both options will be:
 
      - N if either SUNRPC or INFINIBAND are N, in this case the NFS/RDMA client
        and server will not be built
@@ -235,8 +235,9 @@ NFS/RDMA Setup
 
   - Start the NFS server
 
-    If the NFS/RDMA server was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in
+    If the NFS/RDMA server was built as a module
-    kernel config), load the RDMA transport module:
+    (CONFIG_SUNRPC_XPRT_RDMA_SERVER=m in kernel config), load the RDMA
+    transport module:
 
     $ modprobe svcrdma
 
@@ -255,8 +256,9 @@ NFS/RDMA Setup
 
   - On the client system
 
-    If the NFS/RDMA client was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in
+    If the NFS/RDMA client was built as a module
-    kernel config), load the RDMA client module:
+    (CONFIG_SUNRPC_XPRT_RDMA_CLIENT=m in kernel config), load the RDMA client
+    module:
 
     $ modprobe xprtrdma.ko
 

Documentation/filesystems/seq_file.txt

@@ -235,6 +235,39 @@ be used for more than one file, you can store an arbitrary pointer in the
 private field of the seq_file structure; that value can then be retrieved
 by the iterator functions.
 
+There is also a wrapper function to seq_open() called seq_open_private(). It
+kmallocs a zero filled block of memory and stores a pointer to it in the
+private field of the seq_file structure, returning 0 on success. The
+block size is specified in a third parameter to the function, e.g.:
+
+	static int ct_open(struct inode *inode, struct file *file)
+	{
+		return seq_open_private(file, &ct_seq_ops,
+					sizeof(struct mystruct));
+	}
+
+There is also a variant function, __seq_open_private(), which is functionally
+identical except that, if successful, it returns the pointer to the allocated
+memory block, allowing further initialisation e.g.:
+
+	static int ct_open(struct inode *inode, struct file *file)
+	{
+		struct mystruct *p =
+			__seq_open_private(file, &ct_seq_ops, sizeof(*p));
+
+		if (!p)
+			return -ENOMEM;
+
+		p->foo = bar; /* initialize my stuff */
+			...
+		p->baz = true;
+
+		return 0;
+	}
+
+A corresponding close function, seq_release_private() is available which
+frees the memory allocated in the corresponding open.
+
 The other operations of interest - read(), llseek(), and release() - are
 all implemented by the seq_file code itself. So a virtual file's
 file_operations structure will look like:

Documentation/gpio/consumer.txt

@@ -53,7 +53,20 @@ with IS_ERR() (they will never return a NULL pointer). -ENOENT will be returned
 if and only if no GPIO has been assigned to the device/function/index triplet,
 other error codes are used for cases where a GPIO has been assigned but an error
 occurred while trying to acquire it. This is useful to discriminate between mere
-errors and an absence of GPIO for optional GPIO parameters.
+errors and an absence of GPIO for optional GPIO parameters. For the common
+pattern where a GPIO is optional, the gpiod_get_optional() and
+gpiod_get_index_optional() functions can be used. These functions return NULL
+instead of -ENOENT if no GPIO has been assigned to the requested function:
+
+
+	struct gpio_desc *gpiod_get_optional(struct device *dev,
+					     const char *con_id,
+					     enum gpiod_flags flags)
+
+	struct gpio_desc *gpiod_get_index_optional(struct device *dev,
+						   const char *con_id,
+						   unsigned int index,
+						   enum gpiod_flags flags)
 
 Device-managed variants of these functions are also defined:
 
@@ -65,6 +78,15 @@ Device-managed variants of these functions are also defined:
 					       unsigned int idx,
 					       enum gpiod_flags flags)
 
+	struct gpio_desc *devm_gpiod_get_optional(struct device *dev,
+						  const char *con_id,
+						  enum gpiod_flags flags)
+
+	struct gpio_desc * devm_gpiod_get_index_optional(struct device *dev,
+							const char *con_id,
+							unsigned int index,
+							enum gpiod_flags flags)
+
 A GPIO descriptor can be disposed of using the gpiod_put() function:
 
 	void gpiod_put(struct gpio_desc *desc)

Documentation/i2c/dev-interface

@@ -57,12 +57,12 @@ Well, you are all set up now. You can now use SMBus commands or plain
 I2C to communicate with your device. SMBus commands are preferred if
 the device supports them. Both are illustrated below.
 
-  __u8 register = 0x10; /* Device register to access */
+  __u8 reg = 0x10; /* Device register to access */
   __s32 res;
   char buf[10];
 
   /* Using SMBus commands */
-  res = i2c_smbus_read_word_data(file, register);
+  res = i2c_smbus_read_word_data(file, reg);
   if (res < 0) {
     /* ERROR HANDLING: i2c transaction failed */
   } else {
@@ -70,11 +70,11 @@ the device supports them. Both are illustrated below.
   }
 
   /* Using I2C Write, equivalent of 
-     i2c_smbus_write_word_data(file, register, 0x6543) */
+     i2c_smbus_write_word_data(file, reg, 0x6543) */
-  buf[0] = register;
+  buf[0] = reg;
   buf[1] = 0x43;
   buf[2] = 0x65;
-  if (write(file, buf, 3) ! =3) {
+  if (write(file, buf, 3) != 3) {
     /* ERROR HANDLING: i2c transaction failed */
   }
 

Documentation/kernel-parameters.txt

@@ -3541,6 +3541,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 					bogus residue values);
 				s = SINGLE_LUN (the device has only one
 					Logical Unit);
+				u = IGNORE_UAS (don't bind to the uas driver);
 				w = NO_WP_DETECT (don't test whether the
 					medium is write-protected).
 			Example: quirks=0419:aaf5:rl,0421:0433:rc

Documentation/misc-devices/lis3lv02d

@@ -59,7 +59,7 @@ acts similar to /dev/rtc and reacts on free-fall interrupts received
 from the device. It supports blocking operations, poll/select and
 fasync operation modes. You must read 1 bytes from the device.  The
 result is number of free-fall interrupts since the last successful
-read (or 255 if number of interrupts would not fit). See the hpfall.c
+read (or 255 if number of interrupts would not fit). See the freefall.c
 file for an example on using the device.
 
 

Documentation/networking/filter.txt

@@ -462,9 +462,9 @@ JIT compiler
 ------------
 
 The Linux kernel has a built-in BPF JIT compiler for x86_64, SPARC, PowerPC,
-ARM and s390 and can be enabled through CONFIG_BPF_JIT. The JIT compiler is
+ARM, MIPS and s390 and can be enabled through CONFIG_BPF_JIT. The JIT compiler
-transparently invoked for each attached filter from user space or for internal
+is transparently invoked for each attached filter from user space or for
-kernel users if it has been previously enabled by root:
+internal kernel users if it has been previously enabled by root:
 
   echo 1 > /proc/sys/net/core/bpf_jit_enable
 

Documentation/power/regulator/consumer.txt

@@ -143,8 +143,9 @@ This will cause the core to recalculate the total load on the regulator (based
 on all its consumers) and change operating mode (if necessary and permitted)
 to best match the current operating load.
 
-The load_uA value can be determined from the consumers datasheet. e.g.most
+The load_uA value can be determined from the consumer's datasheet. e.g. most
-datasheets have tables showing the max current consumed in certain situations.
+datasheets have tables showing the maximum current consumed in certain
+situations.
 
 Most consumers will use indirect operating mode control since they have no
 knowledge of the regulator or whether the regulator is shared with other
@@ -173,7 +174,7 @@ Consumers can register interest in regulator events by calling :-
 int regulator_register_notifier(struct regulator *regulator,
 			      struct notifier_block *nb);
 
-Consumers can uregister interest by calling :-
+Consumers can unregister interest by calling :-
 
 int regulator_unregister_notifier(struct regulator *regulator,
 				struct notifier_block *nb);

Documentation/power/regulator/design.txt

@@ -9,14 +9,14 @@ Safety
 
  - Errors in regulator configuration can have very serious consequences
    for the system, potentially including lasting hardware damage.
- - It is not possible to automatically determine the power confugration
+ - It is not possible to automatically determine the power configuration
    of the system - software-equivalent variants of the same chip may
-   have different power requirments, and not all components with power
+   have different power requirements, and not all components with power
    requirements are visible to software.
 
   => The API should make no changes to the hardware state unless it has
-     specific knowledge that these changes are safe to do perform on
+     specific knowledge that these changes are safe to perform on this
-     this particular system.
+     particular system.
 
 Consumer use cases
 ------------------

Documentation/power/regulator/machine.txt

@@ -11,7 +11,7 @@ Consider the following machine :-
                +-> [Consumer B @ 3.3V]
 
 The drivers for consumers A & B must be mapped to the correct regulator in
-order to control their power supply. This mapping can be achieved in machine
+order to control their power supplies. This mapping can be achieved in machine
 initialisation code by creating a struct regulator_consumer_supply for
 each regulator.
 
@@ -39,7 +39,7 @@ to the 'Vcc' supply for Consumer A.
 
 Constraints can now be registered by defining a struct regulator_init_data
 for each regulator power domain. This structure also maps the consumers
-to their supply regulator :-
+to their supply regulators :-
 
 static struct regulator_init_data regulator1_data = {
 	.constraints = {

Documentation/power/regulator/overview.txt

@@ -36,11 +36,11 @@ Some terms used in this document:-
                    Consumers can be classified into two types:-
 
                    Static: consumer does not change its supply voltage or
-                   current limit. It only needs to enable or disable it's
+                   current limit. It only needs to enable or disable its
                    power supply. Its supply voltage is set by the hardware,
                    bootloader, firmware or kernel board initialisation code.
 
-                   Dynamic: consumer needs to change it's supply voltage or
+                   Dynamic: consumer needs to change its supply voltage or
                    current limit to meet operation demands.
 
 
@@ -156,7 +156,7 @@ relevant to non SoC devices and is split into the following four interfaces:-
       This interface is for machine specific code and allows the creation of
       voltage/current domains (with constraints) for each regulator. It can
       provide regulator constraints that will prevent device damage through
-      overvoltage or over current caused by buggy client drivers. It also
+      overvoltage or overcurrent caused by buggy client drivers. It also
       allows the creation of a regulator tree whereby some regulators are
       supplied by others (similar to a clock tree).
 

Documentation/power/regulator/regulator.txt

@@ -13,7 +13,7 @@ Drivers can register a regulator by calling :-
 struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 					 const struct regulator_config *config);
 
-This will register the regulators capabilities and operations to the regulator
+This will register the regulator's capabilities and operations to the regulator
 core.
 
 Regulators can be unregistered by calling :-
@@ -23,8 +23,8 @@ void regulator_unregister(struct regulator_dev *rdev);
 
 Regulator Events
 ================
-Regulators can send events (e.g. over temp, under voltage, etc) to consumer
+Regulators can send events (e.g. overtemperature, undervoltage, etc) to
-drivers by calling :-
+consumer drivers by calling :-
 
 int regulator_notifier_call_chain(struct regulator_dev *rdev,
 				  unsigned long event, void *data);

MAINTAINERS

@@ -1665,6 +1665,12 @@ M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/tty/serial/atmel_serial.c
 
+ATMEL Audio ALSA driver
+M:	Bo Shen <voice.shen@atmel.com>
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Supported
+F:	sound/soc/atmel
+
 ATMEL DMA DRIVER
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2098,7 +2104,7 @@ S:	Supported
 F:	drivers/scsi/bfa/
 
 BROCADE BNA 10 GIGABIT ETHERNET DRIVER
-M:	Rasesh Mody <rmody@brocade.com>
+M:	Rasesh Mody <rasesh.mody@qlogic.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/brocade/bna/
@@ -3012,9 +3018,8 @@ S:	Supported
 F:	drivers/acpi/dock.c
 
 DOCUMENTATION
-M:	Randy Dunlap <rdunlap@infradead.org>
+M:	Jiri Kosina <jkosina@suse.cz>
 L:	linux-doc@vger.kernel.org
-T:	quilt http://www.infradead.org/~rdunlap/Doc/patches/
 S:	Maintained
 F:	Documentation/
 X:	Documentation/ABI/
@@ -4477,7 +4482,6 @@ M:	Mika Westerberg <mika.westerberg@linux.intel.com>
 L:	linux-i2c@vger.kernel.org
 L:	linux-acpi@vger.kernel.org
 S:	Maintained
-F:	drivers/i2c/i2c-acpi.c
 
 I2C-TAOS-EVM DRIVER
 M:	Jean Delvare <jdelvare@suse.de>
@@ -5480,7 +5484,7 @@ F:	drivers/macintosh/
 LINUX FOR POWERPC EMBEDDED MPC5XXX
 M:	Anatolij Gustschin <agust@denx.de>
 L:	linuxppc-dev@lists.ozlabs.org
-T:	git git://git.denx.de/linux-2.6-agust.git
+T:	git git://git.denx.de/linux-denx-agust.git
 S:	Maintained
 F:	arch/powerpc/platforms/512x/
 F:	arch/powerpc/platforms/52xx/
@@ -6424,7 +6428,8 @@ F:	Documentation/scsi/NinjaSCSI.txt
 F:	drivers/scsi/nsp32*
 
 NTB DRIVER
-M:	Jon Mason <jon.mason@intel.com>
+M:	Jon Mason <jdmason@kudzu.us>
+M:	Dave Jiang <dave.jiang@intel.com>
 S:	Supported
 W:	https://github.com/jonmason/ntb/wiki
 T:	git git://github.com/jonmason/ntb.git
@@ -6875,7 +6880,7 @@ F:	arch/x86/kernel/quirks.c
 
 PCI DRIVER FOR IMX6
 M:	Richard Zhu <r65037@freescale.com>
-M:	Shawn Guo <shawn.guo@freescale.com>
+M:	Lucas Stach <l.stach@pengutronix.de>
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -7053,7 +7058,7 @@ S:	Maintained
 F:	drivers/pinctrl/sh-pfc/
 
 PIN CONTROLLER - SAMSUNG
-M:	Tomasz Figa <t.figa@samsung.com>
+M:	Tomasz Figa <tomasz.figa@gmail.com>
 M:	Thomas Abraham <thomas.abraham@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
@@ -7899,7 +7904,8 @@ S:	Supported
 F:	drivers/media/i2c/s5k5baf.c
 
 SAMSUNG SOC CLOCK DRIVERS
-M:	Tomasz Figa <t.figa@samsung.com>
+M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
+M:	Tomasz Figa <tomasz.figa@gmail.com>
 S:	Supported
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 F:	drivers/clk/samsung/
@@ -7912,6 +7918,19 @@ S:	Supported
 L:	netdev@vger.kernel.org
 F:	drivers/net/ethernet/samsung/sxgbe/
 
+SAMSUNG USB2 PHY DRIVER
+M:	Kamil Debski <k.debski@samsung.com>
+L:	linux-kernel@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/phy/samsung-phy.txt
+F:	Documentation/phy/samsung-usb2.txt
+F:	drivers/phy/phy-exynos4210-usb2.c
+F:	drivers/phy/phy-exynos4x12-usb2.c
+F:	drivers/phy/phy-exynos5250-usb2.c
+F:	drivers/phy/phy-s5pv210-usb2.c
+F:	drivers/phy/phy-samsung-usb2.c
+F:	drivers/phy/phy-samsung-usb2.h
+
 SERIAL DRIVERS
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-serial@vger.kernel.org
@@ -10070,9 +10089,9 @@ F:	Documentation/x86/
 F:	arch/x86/
 
 X86 PLATFORM DRIVERS
-M:	Matthew Garrett <matthew.garrett@nebula.com>
+M:	Darren Hart <dvhart@infradead.org>
 L:	platform-driver-x86@vger.kernel.org
-T:	git git://cavan.codon.org.uk/platform-drivers-x86.git
+T:	git git://git.infradead.org/users/dvhart/linux-platform-drivers-x86.git
 S:	Maintained
 F:	drivers/platform/x86/
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 17
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION =
 NAME = Shuffling Zombie Juror
 
 # *DOCUMENTATION*

arch/arc/mm/cache_arc700.c

@@ -427,7 +427,7 @@ struct ic_inv_args {
 
 static void __ic_line_inv_vaddr_helper(void *info)
 {
-        struct ic_inv *ic_inv_args = (struct ic_inv_args *) info;
+        struct ic_inv_args *ic_inv = info;
 
         __ic_line_inv_vaddr_local(ic_inv->paddr, ic_inv->vaddr, ic_inv->sz);
 }

arch/arm/boot/dts/am4372.dtsi

@@ -804,7 +804,7 @@
 
 			usb1: usb@48390000 {
 				compatible = "synopsys,dwc3";
-				reg = <0x48390000 0x17000>;
+				reg = <0x48390000 0x10000>;
 				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb2_phy1>;
 				phy-names = "usb2-phy";
@@ -826,7 +826,7 @@
 
 			usb2: usb@483d0000 {
 				compatible = "synopsys,dwc3";
-				reg = <0x483d0000 0x17000>;
+				reg = <0x483d0000 0x10000>;
 				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb2_phy2>;
 				phy-names = "usb2-phy";

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -260,7 +260,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps65218: tps65218@24 {
 		reg = <0x24>;
@@ -424,7 +424,7 @@
 	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
 	nand@0,0 {
 		reg = <0 0 4>;		/* device IO registers */
-		ti,nand-ecc-opt = "bch8";
+		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
 		gpmc,device-width = <1>;
@@ -443,8 +443,6 @@
 		gpmc,rd-cycle-ns = <40>;
 		gpmc,wr-cycle-ns = <40>;
 		gpmc,wait-pin = <0>;
-		gpmc,wait-on-read;
-		gpmc,wait-on-write;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -435,13 +435,13 @@
 };
 
 &gpmc {
-	status = "okay";
+	status = "okay";	/* Disable QSPI when enabling GPMC (NAND) */
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_flash_x8>;
 	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
 	nand@0,0 {
 		reg = <0 0 0>; /* CS0, offset 0 */
-		ti,nand-ecc-opt = "bch8";
+		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
 		gpmc,device-width = <1>;
@@ -459,8 +459,7 @@
 		gpmc,access-ns = <30>; /* tCEA + 4*/
 		gpmc,rd-cycle-ns = <40>;
 		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-on-read = "true";
+		gpmc,wait-pin = <0>;
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
@@ -557,7 +556,7 @@
 };
 
 &qspi {
-	status = "okay";
+	status = "disabled";	/* Disable GPMC (NAND) when enabling QSPI */
 	pinctrl-names = "default";
 	pinctrl-0 = <&qspi1_default>;
 

arch/arm/boot/dts/at91rm9200.dtsi

@@ -149,7 +149,7 @@
 				usb: usbck {
 					compatible = "atmel,at91rm9200-clk-usb";
 					#clock-cells = <0>;
-					atmel,clk-divisors = <1 2>;
+					atmel,clk-divisors = <1 2 0 0>;
 					clocks = <&pllb>;
 				};
 

arch/arm/boot/dts/at91sam9g20.dtsi

@@ -40,6 +40,7 @@
 				};
 
 				pllb: pllbck {
+					compatible = "atmel,at91sam9g20-clk-pllb";
 					atmel,clk-input-range = <2000000 32000000>;
 					atmel,pll-clk-output-ranges = <30000000 100000000 0 0>;
 				};

arch/arm/boot/dts/dra7-evm.dts

@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "dra74x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "TI DRA742";
@@ -24,9 +25,29 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &dra7_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vtt_pin>;
+
+	vtt_pin: pinmux_vtt_pin {
+		pinctrl-single,pins = <
+			0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
+		>;
+	};
+
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
 			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
@@ -43,20 +64,19 @@
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
+			0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
-			0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+			0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
 		>;
 	};
 
 	mcspi1_pins: pinmux_mcspi1_pins {
 		pinctrl-single,pins = <
-			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */
+			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
-			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */
+			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
-			0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */
+			0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
-			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
+			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
-			0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */
+			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
-			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */
+			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
-			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */
 		>;
 	};
 
@@ -284,7 +304,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c3_pins>;
-	clock-frequency = <3400000>;
+	clock-frequency = <400000>;
 };
 
 &mcspi1 {
@@ -427,22 +447,19 @@
 		gpmc,device-width = <2>;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <40>;
+		gpmc,cs-rd-off-ns = <80>;
-		gpmc,cs-wr-off-ns = <40>;
+		gpmc,cs-wr-off-ns = <80>;
 		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-rd-off-ns = <60>;
-		gpmc,adv-wr-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <60>;
-		gpmc,we-on-ns = <5>;
+		gpmc,we-on-ns = <10>;
-		gpmc,we-off-ns = <25>;
+		gpmc,we-off-ns = <50>;
-		gpmc,oe-on-ns = <2>;
+		gpmc,oe-on-ns = <4>;
-		gpmc,oe-off-ns = <20>;
+		gpmc,oe-off-ns = <40>;
-		gpmc,access-ns = <20>;
+		gpmc,access-ns = <40>;
-		gpmc,wr-access-ns = <40>;
+		gpmc,wr-access-ns = <80>;
-		gpmc,rd-cycle-ns = <40>;
+		gpmc,rd-cycle-ns = <80>;
-		gpmc,wr-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <80>;
-		gpmc,wait-pin = <0>;
-		gpmc,wait-on-read;
-		gpmc,wait-on-write;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
@@ -483,7 +500,7 @@
 			reg = <0x001c0000 0x00020000>;
 		};
 		partition@7 {
-			label = "NAND.u-boot-env";
+			label = "NAND.u-boot-env.backup1";
 			reg = <0x001e0000 0x00020000>;
 		};
 		partition@8 {
@@ -504,3 +521,8 @@
 &usb2_phy2 {
 	phy-supply = <&ldousb_reg>;
 };
+
+&gpio7 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};

arch/arm/boot/dts/imx53.dtsi

@@ -423,10 +423,14 @@
 				status = "disabled";
 
 				lvds-channel@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
 					reg = <0>;
 					status = "disabled";
 
-					port {
+					port@0 {
+						reg = <0>;
+
 						lvds0_in: endpoint {
 							remote-endpoint = <&ipu_di0_lvds0>;
 						};
@@ -434,10 +438,14 @@
 				};
 
 				lvds-channel@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
 					reg = <1>;
 					status = "disabled";
 
-					port {
+					port@1 {
+						reg = <1>;
+
 						lvds1_in: endpoint {
 							remote-endpoint = <&ipu_di1_lvds1>;
 						};

arch/arm/boot/dts/k2e-clocks.dtsi

@@ -40,7 +40,7 @@ clocks {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk16>;
-		clock-output-names = "usb";
+		clock-output-names = "usb1";
 		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
 		reg-names = "control", "domain";
 		domain-id = <0>;
@@ -60,8 +60,8 @@ clocks {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk12>;
-		clock-output-names = "pcie";
+		clock-output-names = "pcie1";
-		reg = <0x0235006c 0xb00>, <0x02350000 0x400>;
+		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
 		reg-names = "control", "domain";
 		domain-id = <18>;
 	};

arch/arm/boot/dts/omap3-n900.dts

@@ -93,7 +93,7 @@
 	};
 
 	tv: connector {
-		compatible = "composite-connector";
+		compatible = "composite-video-connector";
 		label = "tv";
 
 		port {

arch/arm/boot/dts/omap3xxx-clocks.dtsi

@@ -467,6 +467,7 @@
 		ti,bit-shift = <0x1e>;
 		reg = <0x0d00>;
 		ti,set-bit-to-disable;
+		ti,set-rate-parent;
 	};
 
 	dpll4_m6_ck: dpll4_m6_ck {

arch/arm/boot/dts/omap5-cm-t54.dts

@@ -353,13 +353,12 @@
 				};
 
 				ldo8_reg: ldo8 {
-					/* VDD_3v0: Does not go anywhere */
+					/* VDD_3V_GP: act led/serial console */
 					regulator-name = "ldo8";
 					regulator-min-microvolt = <3000000>;
 					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
 					regulator-boot-on;
-					/* Unused */
-					status = "disabled";
 				};
 
 				ldo9_reg: ldo9 {

arch/arm/boot/dts/ste-snowball.dts

@@ -116,7 +116,6 @@
 		msp2: msp@80117000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msp2_default_mode>;
-			status = "okay";
 		};
 
 		msp3: msp@80125000 {

arch/arm/common/edma.c

@@ -1443,14 +1443,14 @@ void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no)
 EXPORT_SYMBOL(edma_assign_channel_eventq);
 
 static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
-			      struct edma *edma_cc)
+			      struct edma *edma_cc, int cc_id)
 {
 	int i;
 	u32 value, cccfg;
 	s8 (*queue_priority_map)[2];
 
 	/* Decode the eDMA3 configuration from CCCFG register */
-	cccfg = edma_read(0, EDMA_CCCFG);
+	cccfg = edma_read(cc_id, EDMA_CCCFG);
 
 	value = GET_NUM_REGN(cccfg);
 	edma_cc->num_region = BIT(value);
@@ -1464,7 +1464,8 @@ static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
 	value = GET_NUM_EVQUE(cccfg);
 	edma_cc->num_tc = value + 1;
 
-	dev_dbg(dev, "eDMA3 HW configuration (cccfg: 0x%08x):\n", cccfg);
+	dev_dbg(dev, "eDMA3 CC%d HW configuration (cccfg: 0x%08x):\n", cc_id,
+		cccfg);
 	dev_dbg(dev, "num_region: %u\n", edma_cc->num_region);
 	dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels);
 	dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots);
@@ -1684,7 +1685,7 @@ static int edma_probe(struct platform_device *pdev)
 			return -ENOMEM;
 
 		/* Get eDMA3 configuration from IP */
-		ret = edma_setup_from_hw(dev, info[j], edma_cc[j]);
+		ret = edma_setup_from_hw(dev, info[j], edma_cc[j], j);
 		if (ret)
 			return ret;
 

arch/arm/include/asm/cacheflush.h

@@ -466,6 +466,7 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
  */
 #define v7_exit_coherency_flush(level) \
 	asm volatile( \
+	".arch	armv7-a \n\t" \
 	"stmfd	sp!, {fp, ip} \n\t" \
 	"mrc	p15, 0, r0, c1, c0, 0	@ get SCTLR \n\t" \
 	"bic	r0, r0, #"__stringify(CR_C)" \n\t" \

arch/arm/include/asm/tls.h

@@ -1,6 +1,9 @@
 #ifndef __ASMARM_TLS_H
 #define __ASMARM_TLS_H
 
+#include <linux/compiler.h>
+#include <asm/thread_info.h>
+
 #ifdef __ASSEMBLY__
 #include <asm/asm-offsets.h>
 	.macro switch_tls_none, base, tp, tpuser, tmp1, tmp2
@@ -50,6 +53,49 @@
 #endif
 
 #ifndef __ASSEMBLY__
+
+static inline void set_tls(unsigned long val)
+{
+	struct thread_info *thread;
+
+	thread = current_thread_info();
+
+	thread->tp_value[0] = val;
+
+	/*
+	 * This code runs with preemption enabled and therefore must
+	 * be reentrant with respect to switch_tls.
+	 *
+	 * We need to ensure ordering between the shadow state and the
+	 * hardware state, so that we don't corrupt the hardware state
+	 * with a stale shadow state during context switch.
+	 *
+	 * If we're preempted here, switch_tls will load TPIDRURO from
+	 * thread_info upon resuming execution and the following mcr
+	 * is merely redundant.
+	 */
+	barrier();
+
+	if (!tls_emu) {
+		if (has_tls_reg) {
+			asm("mcr p15, 0, %0, c13, c0, 3"
+			    : : "r" (val));
+		} else {
+#ifdef CONFIG_KUSER_HELPERS
+			/*
+			 * User space must never try to access this
+			 * directly.  Expect your app to break
+			 * eventually if you do so.  The user helper
+			 * at 0xffff0fe0 must be used instead.  (see
+			 * entry-armv.S for details)
+			 */
+			*((unsigned int *)0xffff0ff0) = val;
+#endif
+		}
+
+	}
+}
+
 static inline unsigned long get_tpuser(void)
 {
 	unsigned long reg = 0;
@@ -59,5 +105,23 @@ static inline unsigned long get_tpuser(void)
 
 	return reg;
 }
+
+static inline void set_tpuser(unsigned long val)
+{
+	/* Since TPIDRURW is fully context-switched (unlike TPIDRURO),
+	 * we need not update thread_info.
+	 */
+	if (has_tls_reg && !tls_emu) {
+		asm("mcr p15, 0, %0, c13, c0, 2"
+		    : : "r" (val));
+	}
+}
+
+static inline void flush_tls(void)
+{
+	set_tls(0);
+	set_tpuser(0);
+}
+
 #endif
 #endif	/* __ASMARM_TLS_H */

arch/arm/include/asm/uaccess.h

@@ -107,8 +107,11 @@ static inline void set_fs(mm_segment_t fs)
 extern int __get_user_1(void *);
 extern int __get_user_2(void *);
 extern int __get_user_4(void *);
-extern int __get_user_lo8(void *);
+extern int __get_user_32t_8(void *);
 extern int __get_user_8(void *);
+extern int __get_user_64t_1(void *);
+extern int __get_user_64t_2(void *);
+extern int __get_user_64t_4(void *);
 
 #define __GUP_CLOBBER_1	"lr", "cc"
 #ifdef CONFIG_CPU_USE_DOMAINS
@@ -117,7 +120,7 @@ extern int __get_user_8(void *);
 #define __GUP_CLOBBER_2 "lr", "cc"
 #endif
 #define __GUP_CLOBBER_4	"lr", "cc"
-#define __GUP_CLOBBER_lo8 "lr", "cc"
+#define __GUP_CLOBBER_32t_8 "lr", "cc"
 #define __GUP_CLOBBER_8	"lr", "cc"
 
 #define __get_user_x(__r2,__p,__e,__l,__s)				\
@@ -131,12 +134,30 @@ extern int __get_user_8(void *);
 
 /* narrowing a double-word get into a single 32bit word register: */
 #ifdef __ARMEB__
-#define __get_user_xb(__r2, __p, __e, __l, __s)				\
+#define __get_user_x_32t(__r2, __p, __e, __l, __s)				\
-	__get_user_x(__r2, __p, __e, __l, lo8)
+	__get_user_x(__r2, __p, __e, __l, 32t_8)
 #else
-#define __get_user_xb __get_user_x
+#define __get_user_x_32t __get_user_x
 #endif
 
+/*
+ * storing result into proper least significant word of 64bit target var,
+ * different only for big endian case where 64 bit __r2 lsw is r3:
+ */
+#ifdef __ARMEB__
+#define __get_user_x_64t(__r2, __p, __e, __l, __s)		        \
+	   __asm__ __volatile__ (					\
+		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
+		__asmeq("%3", "r1")					\
+		"bl	__get_user_64t_" #__s				\
+		: "=&r" (__e), "=r" (__r2)				\
+		: "0" (__p), "r" (__l)					\
+		: __GUP_CLOBBER_##__s)
+#else
+#define __get_user_x_64t __get_user_x
+#endif
+
+
 #define __get_user_check(x,p)							\
 	({								\
 		unsigned long __limit = current_thread_info()->addr_limit - 1; \
@@ -146,17 +167,26 @@ extern int __get_user_8(void *);
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
-			__get_user_x(__r2, __p, __e, __l, 1);		\
+			if (sizeof((x)) >= 8)				\
+				__get_user_x_64t(__r2, __p, __e, __l, 1); \
+			else						\
+				__get_user_x(__r2, __p, __e, __l, 1);	\
 			break;						\
 		case 2:							\
-			__get_user_x(__r2, __p, __e, __l, 2);		\
+			if (sizeof((x)) >= 8)				\
+				__get_user_x_64t(__r2, __p, __e, __l, 2); \
+			else						\
+				__get_user_x(__r2, __p, __e, __l, 2);	\
 			break;						\
 		case 4:							\
-			__get_user_x(__r2, __p, __e, __l, 4);		\
+			if (sizeof((x)) >= 8)				\
+				__get_user_x_64t(__r2, __p, __e, __l, 4); \
+			else						\
+				__get_user_x(__r2, __p, __e, __l, 4);	\
 			break;						\
 		case 8:							\
 			if (sizeof((x)) < 8)				\
-				__get_user_xb(__r2, __p, __e, __l, 4);	\
+				__get_user_x_32t(__r2, __p, __e, __l, 4); \
 			else						\
 				__get_user_x(__r2, __p, __e, __l, 8);	\
 			break;						\

arch/arm/include/asm/xen/page-coherent.h

@@ -26,25 +26,14 @@ static inline void xen_dma_map_page(struct device *hwdev, struct page *page,
 	__generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs);
 }
 
-static inline void xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle,
+void xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir,
-		struct dma_attrs *attrs)
+		struct dma_attrs *attrs);
-{
-	if (__generic_dma_ops(hwdev)->unmap_page)
-		__generic_dma_ops(hwdev)->unmap_page(hwdev, handle, size, dir, attrs);
-}
 
-static inline void xen_dma_sync_single_for_cpu(struct device *hwdev,
+void xen_dma_sync_single_for_cpu(struct device *hwdev,
-		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+		dma_addr_t handle, size_t size, enum dma_data_direction dir);
-{
+
-	if (__generic_dma_ops(hwdev)->sync_single_for_cpu)
+void xen_dma_sync_single_for_device(struct device *hwdev,
-		__generic_dma_ops(hwdev)->sync_single_for_cpu(hwdev, handle, size, dir);
+		dma_addr_t handle, size_t size, enum dma_data_direction dir);
-}
 
-static inline void xen_dma_sync_single_for_device(struct device *hwdev,
-		dma_addr_t handle, size_t size, enum dma_data_direction dir)
-{
-	if (__generic_dma_ops(hwdev)->sync_single_for_device)
-		__generic_dma_ops(hwdev)->sync_single_for_device(hwdev, handle, size, dir);
-}
 #endif /* _ASM_ARM_XEN_PAGE_COHERENT_H */

arch/arm/include/asm/xen/page.h

@@ -33,7 +33,6 @@ typedef struct xpaddr {
 #define INVALID_P2M_ENTRY      (~0UL)
 
 unsigned long __pfn_to_mfn(unsigned long pfn);
-unsigned long __mfn_to_pfn(unsigned long mfn);
 extern struct rb_root phys_to_mach;
 
 static inline unsigned long pfn_to_mfn(unsigned long pfn)
@@ -51,14 +50,6 @@ static inline unsigned long pfn_to_mfn(unsigned long pfn)
 
 static inline unsigned long mfn_to_pfn(unsigned long mfn)
 {
-	unsigned long pfn;
-
-	if (phys_to_mach.rb_node != NULL) {
-		pfn = __mfn_to_pfn(mfn);
-		if (pfn != INVALID_P2M_ENTRY)
-			return pfn;
-	}
-
 	return mfn;
 }
 

arch/arm/kernel/armksyms.c

@@ -98,6 +98,14 @@ EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(__get_user_1);
 EXPORT_SYMBOL(__get_user_2);
 EXPORT_SYMBOL(__get_user_4);
+EXPORT_SYMBOL(__get_user_8);
+
+#ifdef __ARMEB__
+EXPORT_SYMBOL(__get_user_64t_1);
+EXPORT_SYMBOL(__get_user_64t_2);
+EXPORT_SYMBOL(__get_user_64t_4);
+EXPORT_SYMBOL(__get_user_32t_8);
+#endif
 
 EXPORT_SYMBOL(__put_user_1);
 EXPORT_SYMBOL(__put_user_2);

arch/arm/kernel/irq.c

@@ -175,7 +175,7 @@ static bool migrate_one_irq(struct irq_desc *desc)
 	c = irq_data_get_irq_chip(d);
 	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
-	else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+	else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret)
 		cpumask_copy(d->affinity, affinity);
 
 	return ret;

arch/arm/kernel/kprobes-test.c

@@ -110,10 +110,13 @@
  *
  *	@ TESTCASE_START
  *	bl	__kprobes_test_case_start
- *	@ start of inline data...
+ *	.pushsection .rodata
+ *	"10:
  *	.ascii "mov r0, r7"	@ text title for test case
  *	.byte	0
- *	.align	2, 0
+ *	.popsection
+ *	@ start of inline data...
+ *	.word	10b		@ pointer to title in .rodata section
  *
  *	@ TEST_ARG_REG
  *	.byte	ARG_TYPE_REG
@@ -971,7 +974,7 @@ void __naked __kprobes_test_case_start(void)
 	__asm__ __volatile__ (
 		"stmdb	sp!, {r4-r11}				\n\t"
 		"sub	sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
-		"bic	r0, lr, #1  @ r0 = inline title string	\n\t"
+		"bic	r0, lr, #1  @ r0 = inline data		\n\t"
 		"mov	r1, sp					\n\t"
 		"bl	kprobes_test_case_start			\n\t"
 		"bx	r0					\n\t"
@@ -1349,15 +1352,14 @@ static unsigned long next_instruction(unsigned long pc)
 	return pc + 4;
 }
 
-static uintptr_t __used kprobes_test_case_start(const char *title, void *stack)
+static uintptr_t __used kprobes_test_case_start(const char **title, void *stack)
 {
 	struct test_arg *args;
 	struct test_arg_end *end_arg;
 	unsigned long test_code;
 
-	args = (struct test_arg *)PTR_ALIGN(title + strlen(title) + 1, 4);
+	current_title = *title++;
-
+	args = (struct test_arg *)title;
-	current_title = title;
 	current_args = args;
 	current_stack = stack;
 

arch/arm/kernel/kprobes-test.h

@@ -111,11 +111,14 @@ struct test_arg_end {
 #define TESTCASE_START(title)					\
 	__asm__ __volatile__ (					\
 	"bl	__kprobes_test_case_start		\n\t"	\
+	".pushsection .rodata				\n\t"	\
+	"10:						\n\t"	\
 	/* don't use .asciz here as 'title' may be */		\
 	/* multiple strings to be concatenated.  */		\
 	".ascii "#title"				\n\t"	\
 	".byte	0					\n\t"	\
-	".align	2, 0					\n\t"
+	".popsection					\n\t"	\
+	".word	10b					\n\t"
 
 #define	TEST_ARG_REG(reg, val)					\
 	".byte	"__stringify(ARG_TYPE_REG)"		\n\t"	\

arch/arm/kernel/perf_event_cpu.c

@@ -76,21 +76,15 @@ static struct pmu_hw_events *cpu_pmu_get_cpu_events(void)
 
 static void cpu_pmu_enable_percpu_irq(void *data)
 {
-	struct arm_pmu *cpu_pmu = data;
+	int irq = *(int *)data;
-	struct platform_device *pmu_device = cpu_pmu->plat_device;
-	int irq = platform_get_irq(pmu_device, 0);
 
 	enable_percpu_irq(irq, IRQ_TYPE_NONE);
-	cpumask_set_cpu(smp_processor_id(), &cpu_pmu->active_irqs);
 }
 
 static void cpu_pmu_disable_percpu_irq(void *data)
 {
-	struct arm_pmu *cpu_pmu = data;
+	int irq = *(int *)data;
-	struct platform_device *pmu_device = cpu_pmu->plat_device;
-	int irq = platform_get_irq(pmu_device, 0);
 
-	cpumask_clear_cpu(smp_processor_id(), &cpu_pmu->active_irqs);
 	disable_percpu_irq(irq);
 }
 
@@ -103,7 +97,7 @@ static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu)
 
 	irq = platform_get_irq(pmu_device, 0);
 	if (irq >= 0 && irq_is_percpu(irq)) {
-		on_each_cpu(cpu_pmu_disable_percpu_irq, cpu_pmu, 1);
+		on_each_cpu(cpu_pmu_disable_percpu_irq, &irq, 1);
 		free_percpu_irq(irq, &percpu_pmu);
 	} else {
 		for (i = 0; i < irqs; ++i) {
@@ -138,7 +132,7 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
 				irq);
 			return err;
 		}
-		on_each_cpu(cpu_pmu_enable_percpu_irq, cpu_pmu, 1);
+		on_each_cpu(cpu_pmu_enable_percpu_irq, &irq, 1);
 	} else {
 		for (i = 0; i < irqs; ++i) {
 			err = 0;

arch/arm/kernel/process.c

@@ -334,6 +334,8 @@ void flush_thread(void)
 	memset(&tsk->thread.debug, 0, sizeof(struct debug_info));
 	memset(&thread->fpstate, 0, sizeof(union fp_state));
 
+	flush_tls();
+
 	thread_notify(THREAD_NOTIFY_FLUSH, thread);
 }
 

arch/arm/kernel/swp_emulate.c

@@ -142,14 +142,6 @@ static int emulate_swpX(unsigned int address, unsigned int *data,
 	while (1) {
 		unsigned long temp;
 
-		/*
-		 * Barrier required between accessing protected resource and
-		 * releasing a lock for it. Legacy code might not have done
-		 * this, and we cannot determine that this is not the case
-		 * being emulated, so insert always.
-		 */
-		smp_mb();
-
 		if (type == TYPE_SWPB)
 			__user_swpb_asm(*data, address, res, temp);
 		else
@@ -162,13 +154,6 @@ static int emulate_swpX(unsigned int address, unsigned int *data,
 	}
 
 	if (res == 0) {
-		/*
-		 * Barrier also required between acquiring a lock for a
-		 * protected resource and accessing the resource. Inserted for
-		 * same reason as above.
-		 */
-		smp_mb();
-
 		if (type == TYPE_SWPB)
 			swpbcounter++;
 		else

arch/arm/kernel/thumbee.c

@@ -45,7 +45,7 @@ static int thumbee_notifier(struct notifier_block *self, unsigned long cmd, void
 
 	switch (cmd) {
 	case THREAD_NOTIFY_FLUSH:
-		thread->thumbee_state = 0;
+		teehbr_write(0);
 		break;
 	case THREAD_NOTIFY_SWITCH:
 		current_thread_info()->thumbee_state = teehbr_read();

arch/arm/kernel/traps.c

@@ -581,7 +581,6 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 #define NR(x) ((__ARM_NR_##x) - __ARM_NR_BASE)
 asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 {
-	struct thread_info *thread = current_thread_info();
 	siginfo_t info;
 
 	if ((no >> 16) != (__ARM_NR_BASE>> 16))
@@ -632,21 +631,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 		return regs->ARM_r0;
 
 	case NR(set_tls):
-		thread->tp_value[0] = regs->ARM_r0;
+		set_tls(regs->ARM_r0);
-		if (tls_emu)
-			return 0;
-		if (has_tls_reg) {
-			asm ("mcr p15, 0, %0, c13, c0, 3"
-				: : "r" (regs->ARM_r0));
-		} else {
-			/*
-			 * User space must never try to access this directly.
-			 * Expect your app to break eventually if you do so.
-			 * The user helper at 0xffff0fe0 must be used instead.
-			 * (see entry-armv.S for details)
-			 */
-			*((unsigned int *)0xffff0ff0) = regs->ARM_r0;
-		}
 		return 0;
 
 #ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG

arch/arm/kvm/handle_exit.c

@@ -93,6 +93,8 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	else
 		kvm_vcpu_block(vcpu);
 
+	kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+
 	return 1;
 }
 

arch/arm/kvm/init.S

@@ -99,6 +99,10 @@ __do_hyp_init:
 	mrc	p15, 0, r0, c10, c2, 1
 	mcr	p15, 4, r0, c10, c2, 1
 
+	@ Invalidate the stale TLBs from Bootloader
+	mcr	p15, 4, r0, c8, c7, 0	@ TLBIALLH
+	dsb	ish
+
 	@ Set the HSCTLR to:
 	@  - ARM/THUMB exceptions: Kernel config (Thumb-2 kernel)
 	@  - Endianness: Kernel config

arch/arm/lib/getuser.S

@@ -80,7 +80,7 @@ ENTRY(__get_user_8)
 ENDPROC(__get_user_8)
 
 #ifdef __ARMEB__
-ENTRY(__get_user_lo8)
+ENTRY(__get_user_32t_8)
 	check_uaccess r0, 8, r1, r2, __get_user_bad
 #ifdef CONFIG_CPU_USE_DOMAINS
 	add	r0, r0, #4
@@ -90,7 +90,37 @@ ENTRY(__get_user_lo8)
 #endif
 	mov	r0, #0
 	ret	lr
-ENDPROC(__get_user_lo8)
+ENDPROC(__get_user_32t_8)
+
+ENTRY(__get_user_64t_1)
+	check_uaccess r0, 1, r1, r2, __get_user_bad8
+8: TUSER(ldrb)	r3, [r0]
+	mov	r0, #0
+	ret	lr
+ENDPROC(__get_user_64t_1)
+
+ENTRY(__get_user_64t_2)
+	check_uaccess r0, 2, r1, r2, __get_user_bad8
+#ifdef CONFIG_CPU_USE_DOMAINS
+rb	.req	ip
+9:	ldrbt	r3, [r0], #1
+10:	ldrbt	rb, [r0], #0
+#else
+rb	.req	r0
+9:	ldrb	r3, [r0]
+10:	ldrb	rb, [r0, #1]
+#endif
+	orr	r3, rb, r3, lsl #8
+	mov	r0, #0
+	ret	lr
+ENDPROC(__get_user_64t_2)
+
+ENTRY(__get_user_64t_4)
+	check_uaccess r0, 4, r1, r2, __get_user_bad8
+11: TUSER(ldr)	r3, [r0]
+	mov	r0, #0
+	ret	lr
+ENDPROC(__get_user_64t_4)
 #endif
 
 __get_user_bad8:
@@ -111,5 +141,9 @@ ENDPROC(__get_user_bad8)
 	.long	6b, __get_user_bad8
 #ifdef __ARMEB__
 	.long   7b, __get_user_bad
+	.long	8b, __get_user_bad8
+	.long	9b, __get_user_bad8
+	.long	10b, __get_user_bad8
+	.long	11b, __get_user_bad8
 #endif
 .popsection

arch/arm/mach-at91/board-dt-rm9200.c

@@ -14,6 +14,7 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
+#include <linux/clk-provider.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -35,13 +36,21 @@ static void __init at91rm9200_dt_init_irq(void)
 	of_irq_init(irq_of_match);
 }
 
+static void __init at91rm9200_dt_timer_init(void)
+{
+#if defined(CONFIG_COMMON_CLK)
+	of_clk_init(NULL);
+#endif
+	at91rm9200_timer_init();
+}
+
 static const char *at91rm9200_dt_board_compat[] __initdata = {
 	"atmel,at91rm9200",
 	NULL
 };
 
 DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
-	.init_time      = at91rm9200_timer_init,
+	.init_time      = at91rm9200_dt_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91rm9200_dt_initialize,

arch/arm/mach-imx/clk-gate2.c

@@ -97,7 +97,7 @@ static int clk_gate2_is_enabled(struct clk_hw *hw)
 	struct clk_gate2 *gate = to_clk_gate2(hw);
 
 	if (gate->share_count)
-		return !!(*gate->share_count);
+		return !!__clk_get_enable_count(hw->clk);
 	else
 		return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx);
 }
@@ -127,10 +127,6 @@ struct clk *clk_register_gate2(struct device *dev, const char *name,
 	gate->bit_idx = bit_idx;
 	gate->flags = clk_gate2_flags;
 	gate->lock = lock;
-
-	/* Initialize share_count per hardware state */
-	if (share_count)
-		*share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0;
 	gate->share_count = share_count;
 
 	init.name = name;

arch/arm/mach-omap2/Kconfig

@@ -1,9 +1,6 @@
 menu "TI OMAP/AM/DM/DRA Family"
 	depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
 
-config ARCH_OMAP
-	bool
-
 config ARCH_OMAP2
 	bool "TI OMAP2"
 	depends on ARCH_MULTI_V6

arch/arm/mach-omap2/gpmc.c

@@ -1207,8 +1207,7 @@ int gpmc_cs_program_settings(int cs, struct gpmc_settings *p)
 		}
 	}
 
-	if ((p->wait_on_read || p->wait_on_write) &&
+	if (p->wait_pin > gpmc_nr_waitpins) {
-	    (p->wait_pin > gpmc_nr_waitpins)) {
 		pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin);
 		return -EINVAL;
 	}
@@ -1288,8 +1287,8 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
 		p->wait_on_write = of_property_read_bool(np,
 							 "gpmc,wait-on-write");
 		if (!p->wait_on_read && !p->wait_on_write)
-			pr_warn("%s: read/write wait monitoring not enabled!\n",
+			pr_debug("%s: rd/wr wait monitoring not enabled!\n",
-				__func__);
+				 __func__);
 	}
 }
 

arch/arm/mach-omap2/omap_hwmod.c

@@ -2065,7 +2065,7 @@ static void _reconfigure_io_chain(void)
 
 	spin_lock_irqsave(&io_chain_lock, flags);
 
-	if (cpu_is_omap34xx() && omap3_has_io_chain_ctrl())
+	if (cpu_is_omap34xx())
 		omap3xxx_prm_reconfigure_io_chain();
 	else if (cpu_is_omap44xx())
 		omap44xx_prm_reconfigure_io_chain();

arch/arm/mach-omap2/prm3xxx.c

@@ -45,7 +45,7 @@ static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
 	.ocp_barrier		= &omap3xxx_prm_ocp_barrier,
 	.save_and_clear_irqen	= &omap3xxx_prm_save_and_clear_irqen,
 	.restore_irqen		= &omap3xxx_prm_restore_irqen,
-	.reconfigure_io_chain	= &omap3xxx_prm_reconfigure_io_chain,
+	.reconfigure_io_chain	= NULL,
 };
 
 /*
@@ -369,15 +369,30 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
 }
 
 /**
- * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ * omap3430_pre_es3_1_reconfigure_io_chain - restart wake-up daisy chain
+ *
+ * The ST_IO_CHAIN bit does not exist in 3430 before es3.1. The only
+ * thing we can do is toggle EN_IO bit for earlier omaps.
+ */
+void omap3430_pre_es3_1_reconfigure_io_chain(void)
+{
+	omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
+				     PM_WKEN);
+	omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
+				   PM_WKEN);
+	omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+}
+
+/**
+ * omap3_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
  *
  * Clear any previously-latched I/O wakeup events and ensure that the
  * I/O wakeup gates are aligned with the current mux settings.  Works
  * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
  * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit.  No
- * return value.
+ * return value. These registers are only available in 3430 es3.1 and later.
  */
-void omap3xxx_prm_reconfigure_io_chain(void)
+void omap3_prm_reconfigure_io_chain(void)
 {
 	int i = 0;
 
@@ -399,6 +414,15 @@ void omap3xxx_prm_reconfigure_io_chain(void)
 	omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
 }
 
+/**
+ * omap3xxx_prm_reconfigure_io_chain - reconfigure I/O chain
+ */
+void omap3xxx_prm_reconfigure_io_chain(void)
+{
+	if (omap3_prcm_irq_setup.reconfigure_io_chain)
+		omap3_prcm_irq_setup.reconfigure_io_chain();
+}
+
 /**
  * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
  *
@@ -656,6 +680,13 @@ static int omap3xxx_prm_late_init(void)
 	if (!(prm_features & PRM_HAS_IO_WAKEUP))
 		return 0;
 
+	if (omap3_has_io_chain_ctrl())
+		omap3_prcm_irq_setup.reconfigure_io_chain =
+			omap3_prm_reconfigure_io_chain;
+	else
+		omap3_prcm_irq_setup.reconfigure_io_chain =
+			omap3430_pre_es3_1_reconfigure_io_chain;
+
 	omap3xxx_prm_enable_io_wakeup();
 	ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
 	if (!ret)

arch/arm/mach-pxa/generic.c

@@ -61,7 +61,7 @@ EXPORT_SYMBOL(get_clock_tick_rate);
 /*
  * For non device-tree builds, keep legacy timer init
  */
-void pxa_timer_init(void)
+void __init pxa_timer_init(void)
 {
 	pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000),
 			    get_clock_tick_rate());

arch/arm/mm/alignment.c

@@ -41,6 +41,7 @@
  * This code is not portable to processors with late data abort handling.
  */
 #define CODING_BITS(i)	(i & 0x0e000000)
+#define COND_BITS(i)	(i & 0xf0000000)
 
 #define LDST_I_BIT(i)	(i & (1 << 26))		/* Immediate constant	*/
 #define LDST_P_BIT(i)	(i & (1 << 24))		/* Preindex		*/
@@ -821,6 +822,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		break;
 
 	case 0x04000000:	/* ldr or str immediate */
+		if (COND_BITS(instr) == 0xf0000000) /* NEON VLDn, VSTn */
+			goto bad;
 		offset.un = OFFSET_BITS(instr);
 		handler = do_alignment_ldrstr;
 		break;

arch/arm/mm/proc-v7-3level.S

@@ -146,7 +146,6 @@ ENDPROC(cpu_v7_set_pte_ext)
 	mov	\tmp, \ttbr1, lsr #(32 - ARCH_PGD_SHIFT)	@ upper bits
 	mov	\ttbr1, \ttbr1, lsl #ARCH_PGD_SHIFT		@ lower bits
 	addls	\ttbr1, \ttbr1, #TTBR1_OFFSET
-	adcls	\tmp, \tmp, #0
 	mcrr	p15, 1, \ttbr1, \tmp, c2			@ load TTBR1
 	mov	\tmp, \ttbr0, lsr #(32 - ARCH_PGD_SHIFT)	@ upper bits
 	mov	\ttbr0, \ttbr0, lsl #ARCH_PGD_SHIFT		@ lower bits
@@ -158,9 +157,9 @@ ENDPROC(cpu_v7_set_pte_ext)
 	 *  TFR   EV X F   IHD LR    S
 	 * .EEE ..EE PUI. .TAT 4RVI ZWRS BLDP WCAM
 	 * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
-	 *   11    0 110    1  0011 1100 .111 1101 < we want
+	 *   11    0 110    0  0011 1100 .111 1101 < we want
 	 */
 	.align	2
 	.type	v7_crval, #object
 v7_crval:
-	crval	clear=0x0120c302, mmuset=0x30c23c7d, ucset=0x00c01c7c
+	crval	clear=0x0122c302, mmuset=0x30c03c7d, ucset=0x00c01c7c

arch/arm/plat-omap/Kconfig

@@ -1,3 +1,6 @@
+config ARCH_OMAP
+	bool
+
 if ARCH_OMAP
 
 menu "TI OMAP Common Features"

arch/arm/xen/Makefile

@@ -1 +1 @@
-obj-y		:= enlighten.o hypercall.o grant-table.o p2m.o mm.o
+obj-y		:= enlighten.o hypercall.o grant-table.o p2m.o mm.o mm32.o

arch/arm/xen/enlighten.c

@@ -260,6 +260,12 @@ static int __init xen_guest_init(void)
 	xen_domain_type = XEN_HVM_DOMAIN;
 
 	xen_setup_features();
+
+	if (!xen_feature(XENFEAT_grant_map_identity)) {
+		pr_warn("Please upgrade your Xen.\n"
+				"If your platform has any non-coherent DMA devices, they won't work properly.\n");
+	}
+
 	if (xen_feature(XENFEAT_dom0))
 		xen_start_info->flags |= SIF_INITDOMAIN|SIF_PRIVILEGED;
 	else

arch/arm/xen/mm32.c

@@ -0,0 +1,202 @@
+#include <linux/cpu.h>
+#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
+#include <linux/highmem.h>
+
+#include <xen/features.h>
+
+static DEFINE_PER_CPU(unsigned long, xen_mm32_scratch_virt);
+static DEFINE_PER_CPU(pte_t *, xen_mm32_scratch_ptep);
+
+static int alloc_xen_mm32_scratch_page(int cpu)
+{
+	struct page *page;
+	unsigned long virt;
+	pmd_t *pmdp;
+	pte_t *ptep;
+
+	if (per_cpu(xen_mm32_scratch_ptep, cpu) != NULL)
+		return 0;
+
+	page = alloc_page(GFP_KERNEL);
+	if (page == NULL) {
+		pr_warn("Failed to allocate xen_mm32_scratch_page for cpu %d\n", cpu);
+		return -ENOMEM;
+	}
+
+	virt = (unsigned long)__va(page_to_phys(page));
+	pmdp = pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt);
+	ptep = pte_offset_kernel(pmdp, virt);
+
+	per_cpu(xen_mm32_scratch_virt, cpu) = virt;
+	per_cpu(xen_mm32_scratch_ptep, cpu) = ptep;
+
+	return 0;
+}
+
+static int xen_mm32_cpu_notify(struct notifier_block *self,
+				    unsigned long action, void *hcpu)
+{
+	int cpu = (long)hcpu;
+	switch (action) {
+	case CPU_UP_PREPARE:
+		if (alloc_xen_mm32_scratch_page(cpu))
+			return NOTIFY_BAD;
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block xen_mm32_cpu_notifier = {
+	.notifier_call	= xen_mm32_cpu_notify,
+};
+
+static void* xen_mm32_remap_page(dma_addr_t handle)
+{
+	unsigned long virt = get_cpu_var(xen_mm32_scratch_virt);
+	pte_t *ptep = __get_cpu_var(xen_mm32_scratch_ptep);
+
+	*ptep = pfn_pte(handle >> PAGE_SHIFT, PAGE_KERNEL);
+	local_flush_tlb_kernel_page(virt);
+
+	return (void*)virt;
+}
+
+static void xen_mm32_unmap(void *vaddr)
+{
+	put_cpu_var(xen_mm32_scratch_virt);
+}
+
+
+/* functions called by SWIOTLB */
+
+static void dma_cache_maint(dma_addr_t handle, unsigned long offset,
+	size_t size, enum dma_data_direction dir,
+	void (*op)(const void *, size_t, int))
+{
+	unsigned long pfn;
+	size_t left = size;
+
+	pfn = (handle >> PAGE_SHIFT) + offset / PAGE_SIZE;
+	offset %= PAGE_SIZE;
+
+	do {
+		size_t len = left;
+		void *vaddr;
+	
+		if (!pfn_valid(pfn))
+		{
+			/* Cannot map the page, we don't know its physical address.
+			 * Return and hope for the best */
+			if (!xen_feature(XENFEAT_grant_map_identity))
+				return;
+			vaddr = xen_mm32_remap_page(handle) + offset;
+			op(vaddr, len, dir);
+			xen_mm32_unmap(vaddr - offset);
+		} else {
+			struct page *page = pfn_to_page(pfn);
+
+			if (PageHighMem(page)) {
+				if (len + offset > PAGE_SIZE)
+					len = PAGE_SIZE - offset;
+
+				if (cache_is_vipt_nonaliasing()) {
+					vaddr = kmap_atomic(page);
+					op(vaddr + offset, len, dir);
+					kunmap_atomic(vaddr);
+				} else {
+					vaddr = kmap_high_get(page);
+					if (vaddr) {
+						op(vaddr + offset, len, dir);
+						kunmap_high(page);
+					}
+				}
+			} else {
+				vaddr = page_address(page) + offset;
+				op(vaddr, len, dir);
+			}
+		}
+
+		offset = 0;
+		pfn++;
+		left -= len;
+	} while (left);
+}
+
+static void __xen_dma_page_dev_to_cpu(struct device *hwdev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir)
+{
+	/* Cannot use __dma_page_dev_to_cpu because we don't have a
+	 * struct page for handle */
+
+	if (dir != DMA_TO_DEVICE)
+		outer_inv_range(handle, handle + size);
+
+	dma_cache_maint(handle & PAGE_MASK, handle & ~PAGE_MASK, size, dir, dmac_unmap_area);
+}
+
+static void __xen_dma_page_cpu_to_dev(struct device *hwdev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir)
+{
+
+	dma_cache_maint(handle & PAGE_MASK, handle & ~PAGE_MASK, size, dir, dmac_map_area);
+
+	if (dir == DMA_FROM_DEVICE) {
+		outer_inv_range(handle, handle + size);
+	} else {
+		outer_clean_range(handle, handle + size);
+	}
+}
+
+void xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir,
+		struct dma_attrs *attrs)
+
+{
+	if (!__generic_dma_ops(hwdev)->unmap_page)
+		return;
+	if (dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
+		return;
+
+	__xen_dma_page_dev_to_cpu(hwdev, handle, size, dir);
+}
+
+void xen_dma_sync_single_for_cpu(struct device *hwdev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	if (!__generic_dma_ops(hwdev)->sync_single_for_cpu)
+		return;
+	__xen_dma_page_dev_to_cpu(hwdev, handle, size, dir);
+}
+
+void xen_dma_sync_single_for_device(struct device *hwdev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	if (!__generic_dma_ops(hwdev)->sync_single_for_device)
+		return;
+	__xen_dma_page_cpu_to_dev(hwdev, handle, size, dir);
+}
+
+int __init xen_mm32_init(void)
+{
+	int cpu;
+
+	if (!xen_initial_domain())
+		return 0;
+
+	register_cpu_notifier(&xen_mm32_cpu_notifier);
+	get_online_cpus();
+	for_each_online_cpu(cpu) {
+		if (alloc_xen_mm32_scratch_page(cpu)) {
+			put_online_cpus();
+			unregister_cpu_notifier(&xen_mm32_cpu_notifier);
+			return -ENOMEM;
+		}
+	}
+	put_online_cpus();
+
+	return 0;
+}
+arch_initcall(xen_mm32_init);

arch/arm/xen/p2m.c

@@ -21,14 +21,12 @@ struct xen_p2m_entry {
 	unsigned long pfn;
 	unsigned long mfn;
 	unsigned long nr_pages;
-	struct rb_node rbnode_mach;
 	struct rb_node rbnode_phys;
 };
 
 static rwlock_t p2m_lock;
 struct rb_root phys_to_mach = RB_ROOT;
 EXPORT_SYMBOL_GPL(phys_to_mach);
-static struct rb_root mach_to_phys = RB_ROOT;
 
 static int xen_add_phys_to_mach_entry(struct xen_p2m_entry *new)
 {
@@ -41,8 +39,6 @@ static int xen_add_phys_to_mach_entry(struct xen_p2m_entry *new)
 		parent = *link;
 		entry = rb_entry(parent, struct xen_p2m_entry, rbnode_phys);
 
-		if (new->mfn == entry->mfn)
-			goto err_out;
 		if (new->pfn == entry->pfn)
 			goto err_out;
 
@@ -88,64 +84,6 @@ unsigned long __pfn_to_mfn(unsigned long pfn)
 }
 EXPORT_SYMBOL_GPL(__pfn_to_mfn);
 
-static int xen_add_mach_to_phys_entry(struct xen_p2m_entry *new)
-{
-	struct rb_node **link = &mach_to_phys.rb_node;
-	struct rb_node *parent = NULL;
-	struct xen_p2m_entry *entry;
-	int rc = 0;
-
-	while (*link) {
-		parent = *link;
-		entry = rb_entry(parent, struct xen_p2m_entry, rbnode_mach);
-
-		if (new->mfn == entry->mfn)
-			goto err_out;
-		if (new->pfn == entry->pfn)
-			goto err_out;
-
-		if (new->mfn < entry->mfn)
-			link = &(*link)->rb_left;
-		else
-			link = &(*link)->rb_right;
-	}
-	rb_link_node(&new->rbnode_mach, parent, link);
-	rb_insert_color(&new->rbnode_mach, &mach_to_phys);
-	goto out;
-
-err_out:
-	rc = -EINVAL;
-	pr_warn("%s: cannot add pfn=%pa -> mfn=%pa: pfn=%pa -> mfn=%pa already exists\n",
-			__func__, &new->pfn, &new->mfn, &entry->pfn, &entry->mfn);
-out:
-	return rc;
-}
-
-unsigned long __mfn_to_pfn(unsigned long mfn)
-{
-	struct rb_node *n = mach_to_phys.rb_node;
-	struct xen_p2m_entry *entry;
-	unsigned long irqflags;
-
-	read_lock_irqsave(&p2m_lock, irqflags);
-	while (n) {
-		entry = rb_entry(n, struct xen_p2m_entry, rbnode_mach);
-		if (entry->mfn <= mfn &&
-				entry->mfn + entry->nr_pages > mfn) {
-			read_unlock_irqrestore(&p2m_lock, irqflags);
-			return entry->pfn + (mfn - entry->mfn);
-		}
-		if (mfn < entry->mfn)
-			n = n->rb_left;
-		else
-			n = n->rb_right;
-	}
-	read_unlock_irqrestore(&p2m_lock, irqflags);
-
-	return INVALID_P2M_ENTRY;
-}
-EXPORT_SYMBOL_GPL(__mfn_to_pfn);
-
 int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops,
 			    struct gnttab_map_grant_ref *kmap_ops,
 			    struct page **pages, unsigned int count)
@@ -192,7 +130,6 @@ bool __set_phys_to_machine_multi(unsigned long pfn,
 			p2m_entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys);
 			if (p2m_entry->pfn <= pfn &&
 					p2m_entry->pfn + p2m_entry->nr_pages > pfn) {
-				rb_erase(&p2m_entry->rbnode_mach, &mach_to_phys);
 				rb_erase(&p2m_entry->rbnode_phys, &phys_to_mach);
 				write_unlock_irqrestore(&p2m_lock, irqflags);
 				kfree(p2m_entry);
@@ -217,8 +154,7 @@ bool __set_phys_to_machine_multi(unsigned long pfn,
 	p2m_entry->mfn = mfn;
 
 	write_lock_irqsave(&p2m_lock, irqflags);
-	if ((rc = xen_add_phys_to_mach_entry(p2m_entry) < 0) ||
+	if ((rc = xen_add_phys_to_mach_entry(p2m_entry)) < 0) {
-		(rc = xen_add_mach_to_phys_entry(p2m_entry) < 0)) {
 		write_unlock_irqrestore(&p2m_lock, irqflags);
 		return false;
 	}

arch/arm64/crypto/sha2-ce-glue.c

@@ -150,7 +150,6 @@ static void sha2_finup(struct shash_desc *desc, const u8 *data,
 	kernel_neon_begin_partial(28);
 	sha2_ce_transform(blocks, data, sctx->state, NULL, len);
 	kernel_neon_end();
-	data += blocks * SHA256_BLOCK_SIZE;
 }
 
 static int sha224_finup(struct shash_desc *desc, const u8 *data,

arch/arm64/include/asm/hw_breakpoint.h

@@ -79,7 +79,6 @@ static inline void decode_ctrl_reg(u32 reg,
  */
 #define ARM_MAX_BRP		16
 #define ARM_MAX_WRP		16
-#define ARM_MAX_HBP_SLOTS	(ARM_MAX_BRP + ARM_MAX_WRP)
 
 /* Virtual debug register bases. */
 #define AARCH64_DBG_REG_BVR	0

arch/arm64/include/asm/processor.h

@@ -139,7 +139,7 @@ extern struct task_struct *cpu_switch_to(struct task_struct *prev,
 	((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
 
 #define KSTK_EIP(tsk)	((unsigned long)task_pt_regs(tsk)->pc)
-#define KSTK_ESP(tsk)	((unsigned long)task_pt_regs(tsk)->sp)
+#define KSTK_ESP(tsk)	user_stack_pointer(task_pt_regs(tsk))
 
 /*
  * Prefetching support

arch/arm64/include/asm/ptrace.h

@@ -137,7 +137,7 @@ struct pt_regs {
 	(!((regs)->pstate & PSR_F_BIT))
 
 #define user_stack_pointer(regs) \
-	(!compat_user_mode(regs)) ? ((regs)->sp) : ((regs)->compat_sp)
+	(!compat_user_mode(regs) ? (regs)->sp : (regs)->compat_sp)
 
 static inline unsigned long regs_return_value(struct pt_regs *regs)
 {

arch/arm64/kernel/fpsimd.c

@@ -270,6 +270,7 @@ static int fpsimd_cpu_pm_notifier(struct notifier_block *self,
 	case CPU_PM_ENTER:
 		if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE))
 			fpsimd_save_state(&current->thread.fpsimd_state);
+		this_cpu_write(fpsimd_last_state, NULL);
 		break;
 	case CPU_PM_EXIT:
 		if (current->mm)

arch/arm64/kernel/head.S

@@ -373,10 +373,6 @@ ENTRY(__boot_cpu_mode)
 	.long	0
 	.popsection
 
-	.align	3
-2:	.quad	.
-	.quad	PAGE_OFFSET
-
 #ifdef CONFIG_SMP
 	.align	3
 1:	.quad	.

arch/arm64/kernel/irq.c

@@ -97,19 +97,15 @@ static bool migrate_one_irq(struct irq_desc *desc)
 	if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
 		return false;
 
-	if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids)
+	if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
+		affinity = cpu_online_mask;
 		ret = true;
+	}
 
-	/*
-	 * when using forced irq_set_affinity we must ensure that the cpu
-	 * being offlined is not present in the affinity mask, it may be
-	 * selected as the target CPU otherwise
-	 */
-	affinity = cpu_online_mask;
 	c = irq_data_get_irq_chip(d);
 	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
-	else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+	else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret)
 		cpumask_copy(d->affinity, affinity);
 
 	return ret;

arch/arm64/kernel/perf_regs.c

@@ -24,6 +24,12 @@ u64 perf_reg_value(struct pt_regs *regs, int idx)
 			return regs->compat_lr;
 	}
 
+	if ((u32)idx == PERF_REG_ARM64_SP)
+		return regs->sp;
+
+	if ((u32)idx == PERF_REG_ARM64_PC)
+		return regs->pc;
+
 	return regs->regs[idx];
 }
 

arch/arm64/kernel/process.c

@@ -230,9 +230,27 @@ void exit_thread(void)
 {
 }
 
+static void tls_thread_flush(void)
+{
+	asm ("msr tpidr_el0, xzr");
+
+	if (is_compat_task()) {
+		current->thread.tp_value = 0;
+
+		/*
+		 * We need to ensure ordering between the shadow state and the
+		 * hardware state, so that we don't corrupt the hardware state
+		 * with a stale shadow state during context switch.
+		 */
+		barrier();
+		asm ("msr tpidrro_el0, xzr");
+	}
+}
+
 void flush_thread(void)
 {
 	fpsimd_flush_thread();
+	tls_thread_flush();
 	flush_ptrace_hw_breakpoint(current);
 }
 

arch/arm64/kernel/ptrace.c

@@ -87,7 +87,8 @@ static void ptrace_hbptriggered(struct perf_event *bp,
 			break;
 		}
 	}
-	for (i = ARM_MAX_BRP; i < ARM_MAX_HBP_SLOTS && !bp; ++i) {
+
+	for (i = 0; i < ARM_MAX_WRP; ++i) {
 		if (current->thread.debug.hbp_watch[i] == bp) {
 			info.si_errno = -((i << 1) + 1);
 			break;
@@ -662,8 +663,10 @@ static int compat_gpr_get(struct task_struct *target,
 			kbuf += sizeof(reg);
 		} else {
 			ret = copy_to_user(ubuf, &reg, sizeof(reg));
-			if (ret)
+			if (ret) {
+				ret = -EFAULT;
 				break;
+			}
 
 			ubuf += sizeof(reg);
 		}
@@ -701,8 +704,10 @@ static int compat_gpr_set(struct task_struct *target,
 			kbuf += sizeof(reg);
 		} else {
 			ret = copy_from_user(&reg, ubuf, sizeof(reg));
-			if (ret)
+			if (ret) {
-				return ret;
+				ret = -EFAULT;
+				break;
+			}
 
 			ubuf += sizeof(reg);
 		}

arch/arm64/kernel/setup.c

@@ -78,6 +78,7 @@ unsigned int compat_elf_hwcap2 __read_mostly;
 #endif
 
 static const char *cpu_name;
+static const char *machine_name;
 phys_addr_t __fdt_pointer __initdata;
 
 /*
@@ -309,6 +310,8 @@ static void __init setup_machine_fdt(phys_addr_t dt_phys)
 		while (true)
 			cpu_relax();
 	}
+
+	machine_name = of_flat_dt_get_machine_name();
 }
 
 /*
@@ -447,21 +450,10 @@ static int c_show(struct seq_file *m, void *v)
 {
 	int i;
 
-	/*
+	seq_printf(m, "Processor\t: %s rev %d (%s)\n",
-	 * Dump out the common processor features in a single line. Userspace
+		   cpu_name, read_cpuid_id() & 15, ELF_PLATFORM);
-	 * should read the hwcaps with getauxval(AT_HWCAP) rather than
-	 * attempting to parse this.
-	 */
-	seq_puts(m, "features\t:");
-	for (i = 0; hwcap_str[i]; i++)
-		if (elf_hwcap & (1 << i))
-			seq_printf(m, " %s", hwcap_str[i]);
-	seq_puts(m, "\n\n");
 
 	for_each_online_cpu(i) {
-		struct cpuinfo_arm64 *cpuinfo = &per_cpu(cpu_data, i);
-		u32 midr = cpuinfo->reg_midr;
-
 		/*
 		 * glibc reads /proc/cpuinfo to determine the number of
 		 * online processors, looking for lines beginning with
@@ -470,13 +462,25 @@ static int c_show(struct seq_file *m, void *v)
 #ifdef CONFIG_SMP
 		seq_printf(m, "processor\t: %d\n", i);
 #endif
-		seq_printf(m, "implementer\t: 0x%02x\n",
-			   MIDR_IMPLEMENTOR(midr));
-		seq_printf(m, "variant\t\t: 0x%x\n", MIDR_VARIANT(midr));
-		seq_printf(m, "partnum\t\t: 0x%03x\n", MIDR_PARTNUM(midr));
-		seq_printf(m, "revision\t: 0x%x\n\n", MIDR_REVISION(midr));
 	}
 
+	/* dump out the processor features */
+	seq_puts(m, "Features\t: ");
+
+	for (i = 0; hwcap_str[i]; i++)
+		if (elf_hwcap & (1 << i))
+			seq_printf(m, "%s ", hwcap_str[i]);
+
+	seq_printf(m, "\nCPU implementer\t: 0x%02x\n", read_cpuid_id() >> 24);
+	seq_printf(m, "CPU architecture: AArch64\n");
+	seq_printf(m, "CPU variant\t: 0x%x\n", (read_cpuid_id() >> 20) & 15);
+	seq_printf(m, "CPU part\t: 0x%03x\n", (read_cpuid_id() >> 4) & 0xfff);
+	seq_printf(m, "CPU revision\t: %d\n", read_cpuid_id() & 15);
+
+	seq_puts(m, "\n");
+
+	seq_printf(m, "Hardware\t: %s\n", machine_name);
+
 	return 0;
 }