bus: ti-sysc: Check for lost context in sysc_reinit_module()

There is no need to restore context if it was not lost. Let's add a new
function sysc_check_context() to check for lost context. To make use of it,
we need to save the sysconfig register status on enable and disable.

Signed-off-by: Tony Lindgren <tony@atomide.com>

drivers/bus/ti-sysc.c

@@ -132,6 +132,7 @@ struct sysc {
 	struct ti_sysc_cookie cookie;
 	const char *name;
 	u32 revision;
+	u32 sysconfig;
 	unsigned int reserved:1;
 	unsigned int enabled:1;
 	unsigned int needs_resume:1;
@@ -1135,7 +1136,8 @@ set_midle:
 	best_mode = fls(ddata->cfg.midlemodes) - 1;
 	if (best_mode > SYSC_IDLE_MASK) {
 		dev_err(dev, "%s: invalid midlemode\n", __func__);
-		return -EINVAL;
+		error = -EINVAL;
+		goto save_context;
 	}
 
 	if (ddata->cfg.quirks & SYSC_QUIRK_SWSUP_MSTANDBY)
@@ -1153,13 +1155,16 @@ set_autoidle:
 		sysc_write_sysconfig(ddata, reg);
 	}
 
-	/* Flush posted write */
+	error = 0;
-	sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]);
+
+save_context:
+	/* Save context and flush posted write */
+	ddata->sysconfig = sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]);
 
 	if (ddata->module_enable_quirk)
 		ddata->module_enable_quirk(ddata);
 
-	return 0;
+	return error;
 }
 
 static int sysc_best_idle_mode(u32 idlemodes, u32 *best_mode)
@@ -1216,8 +1221,10 @@ static int sysc_disable_module(struct device *dev)
 set_sidle:
 	/* Set SIDLE mode */
 	idlemodes = ddata->cfg.sidlemodes;
-	if (!idlemodes || regbits->sidle_shift < 0)
+	if (!idlemodes || regbits->sidle_shift < 0) {
-		return 0;
+		ret = 0;
+		goto save_context;
+	}
 
 	if (ddata->cfg.quirks & SYSC_QUIRK_SWSUP_SIDLE) {
 		best_mode = SYSC_IDLE_FORCE;
@@ -1225,7 +1232,8 @@ set_sidle:
 		ret = sysc_best_idle_mode(idlemodes, &best_mode);
 		if (ret) {
 			dev_err(dev, "%s: invalid sidlemode\n", __func__);
-			return ret;
+			ret = -EINVAL;
+			goto save_context;
 		}
 	}
 
@@ -1236,10 +1244,13 @@ set_sidle:
 		reg |= 1 << regbits->autoidle_shift;
 	sysc_write_sysconfig(ddata, reg);
 
-	/* Flush posted write */
+	ret = 0;
-	sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]);
 
-	return 0;
+save_context:
+	/* Save context and flush posted write */
+	ddata->sysconfig = sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]);
+
+	return ret;
 }
 
 static int __maybe_unused sysc_runtime_suspend_legacy(struct device *dev,
@@ -1377,13 +1388,40 @@ err_allow_idle:
 	return error;
 }
 
+/*
+ * Checks if device context was lost. Assumes the sysconfig register value
+ * after lost context is different from the configured value. Only works for
+ * enabled devices.
+ *
+ * Eventually we may want to also add support to using the context lost
+ * registers that some SoCs have.
+ */
+static int sysc_check_context(struct sysc *ddata)
+{
+	u32 reg;
+
+	if (!ddata->enabled)
+		return -ENODATA;
+
+	reg = sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]);
+	if (reg == ddata->sysconfig)
+		return 0;
+
+	return -EACCES;
+}
+
 static int sysc_reinit_module(struct sysc *ddata, bool leave_enabled)
 {
 	struct device *dev = ddata->dev;
 	int error;
 
-	/* Disable target module if it is enabled */
 	if (ddata->enabled) {
+		/* Nothing to do if enabled and context not lost */
+		error = sysc_check_context(ddata);
+		if (!error)
+			return 0;
+
+		/* Disable target module if it is enabled */
 		error = sysc_runtime_suspend(dev);
 		if (error)
 			dev_warn(dev, "reinit suspend failed: %i\n", error);