mmc: renesas_sdhi: Add RZ/V2H(P) compatible string

The SD/MMC block on the RZ/V2H(P) ("R9A09G057") SoC is similar to that
of the R-Car Gen3, but it has some differences:
- HS400 is not supported.
- It has additional SD_STATUS register to control voltage,
  power enable and reset.
- It supports fixed address mode.

To accommodate these differences, a SoC-specific 'renesas,sdhi-r9a09g057'
compatible string is added.

Note for RZ/V2H(P), we are using the `of_rzg2l_compatible` OF data as it
already handles no HS400 and fixed address mode support. Since the SDxIOVS
and SDxPWEN pins can always be used as GPIO pins on the RZ/V2H(P) SoC, no
driver changes are done to control the SD_STATUS register.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20240724182119.652080-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Lad Prabhakar 2024-07-24 19:21:19 +01:00 committed by Ulf Hansson
parent a091f510af
commit b6db8f1fb4

View File

@ -285,6 +285,7 @@ static const struct of_device_id renesas_sdhi_internal_dmac_of_match[] = {
{ .compatible = "renesas,sdhi-r8a77990", .data = &of_r8a77990_compatible, },
{ .compatible = "renesas,sdhi-r8a77995", .data = &of_rcar_gen3_nohs400_compatible, },
{ .compatible = "renesas,sdhi-r9a09g011", .data = &of_rzg2l_compatible, },
{ .compatible = "renesas,sdhi-r9a09g057", .data = &of_rzg2l_compatible, },
{ .compatible = "renesas,rzg2l-sdhi", .data = &of_rzg2l_compatible, },
{ .compatible = "renesas,rcar-gen3-sdhi", .data = &of_rcar_gen3_compatible, },
{ .compatible = "renesas,rcar-gen4-sdhi", .data = &of_rcar_gen3_compatible, },