Merge tag 'pinctrl-mergebase-20120418' into HEAD

Conflicts: drivers/pinctrl/core.c
2025-01-10 15:10:38 +00:00 · 2012-05-11 09:04:22 +02:00 · 2012-05-11 09:04:22 +02:00 · b9e3b72d4a
commit b9e3b72d4a
parent c0af14d321 dcb5dbc305
27 changed files with 1350 additions and 188 deletions
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt
@ -0,0 +1,132 @@
+NVIDIA Tegra20 pinmux controller
+
+Required properties:
+- compatible: "nvidia,tegra20-pinmux"
+- reg: Should contain the register physical address and length for each of
+  the tri-state, mux, pull-up/down, and pad control register sets.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Tegra's pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, tristate, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function or tristate parameter. For this
+reason, even seemingly boolean values are actually tristates in this binding:
+unspecified, off, or on. Unspecified is represented as an absent property,
+and off/on are represented as integer values 0 and 1.
+
+Required subnode-properties:
+- nvidia,pins : An array of strings. Each string contains the name of a pin or
+    group. Valid values for these names are listed below.
+
+Optional subnode-properties:
+- nvidia,function: A string containing the name of the function to mux to the
+  pin or group. Valid values for function names are listed below. See the Tegra
+  TRM to determine which are valid for each pin or group.
+- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
+    0: none, 1: down, 2: up.
+- nvidia,tristate: Integer.
+    0: drive, 1: tristate.
+- nvidia,high-speed-mode: Integer. Enable high speed mode the pins.
+    0: no, 1: yes.
+- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
+    0: no, 1: yes.
+- nvidia,low-power-mode: Integer. Valid values 0-3. 0 is least power, 3 is
+    most power. Controls the drive power or current. See "Low Power Mode"
+    or "LPMD1" and "LPMD0" in the Tegra TRM.
+- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
+    The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
+    Tegra TRM.
+- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
+    The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
+    Tegra TRM.
+- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is
+    fastest. The range of valid values depends on the pingroup. See
+    "DRVDN_SLWR" in the Tegra TRM.
+- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is
+    fastest. The range of valid values depends on the pingroup. See
+    "DRVUP_SLWF" in the Tegra TRM.
+
+Note that many of these properties are only valid for certain specific pins
+or groups. See the Tegra TRM and various pinmux spreadsheets for complete
+details regarding which groups support which functionality. The Linux pinctrl
+driver may also be a useful reference, since it consolidates, disambiguates,
+and corrects data from all those sources.
+
+Valid values for pin and group names are:
+
+  mux groups:
+
+    These all support nvidia,function, nvidia,tristate, and many support
+    nvidia,pull.
+
+    ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1, dap2, dap3, dap4,
+    ddc, dta, dtb, dtc, dtd, dte, dtf, gma, gmb, gmc, gmd, gme, gpu, gpu7,
+    gpv, hdint, i2cp, irrx, irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn,
+    ld0, ld1, ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12, ld13,
+    ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2, lhs, lm0, lm1, lpp,
+    lpw0, lpw1, lpw2, lsc0, lsc1, lsck, lsda, lsdi, lspi, lvp0, lvp1, lvs,
+    owc, pmc, pta, rm, sdb, sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi,
+    spdo, spia, spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac, uad,
+    uca, ucb, uda.
+
+  tristate groups:
+
+    These only support nvidia,pull.
+
+    ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls, lc, ld17_0,
+    ld19_18, ld21_20, ld23_22.
+
+  drive groups:
+
+    With some exceptions, these support nvidia,high-speed-mode,
+    nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength,
+    nvidia,pull-up-strength, nvidia,slew_rate-rising, nvidia,slew_rate-falling.
+
+    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2,
+    drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg,
+    drive_lcd1, drive_lcd2, drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa,
+    drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2, drive_xm2a,
+    drive_xm2c, drive_xm2d, drive_xm2clk, drive_sdio1, drive_crt, drive_ddc,
+    drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr,
+    drive_uda.
+
+Example:
+
+	pinctrl@70000000 {
+		compatible = "nvidia,tegra20-pinmux";
+		reg = < 0x70000014 0x10    /* Tri-state registers */
+			0x70000080 0x20    /* Mux registers */
+			0x700000a0 0x14    /* Pull-up/down registers */
+			0x70000868 0xa8 >; /* Pad control registers */
+	};
+
+Example board file extract:
+
+	pinctrl@70000000 {
+		sdio4_default: sdio4_default {
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+		};
+	};
+
+	sdhci@c8000600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio4_default>;
+	};
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt
@ -0,0 +1,132 @@
+NVIDIA Tegra30 pinmux controller
+
+The Tegra30 pinctrl binding is very similar to the Tegra20 pinctrl binding,
+as described in nvidia,tegra20-pinmux.txt. In fact, this document assumes
+that binding as a baseline, and only documents the differences between the
+two bindings.
+
+Required properties:
+- compatible: "nvidia,tegra30-pinmux"
+- reg: Should contain the register physical address and length for each of
+  the pad control and mux registers.
+
+Tegra30 adds the following optional properties for pin configuration subnodes:
+- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes.
+- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes.
+- nvidia,lock: Integer. Lock the pin configuration against further changes
+    until reset. 0: no, 1: yes.
+- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes.
+
+As with Tegra20, see the Tegra TRM for complete details regarding which groups
+support which functionality.
+
+Valid values for pin and group names are:
+
+  per-pin mux groups:
+
+    These all support nvidia,function, nvidia,tristate, nvidia,pull,
+    nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain,
+    nvidia,io-reset.
+
+    clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2, dap2_sclk_pa3,
+    dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, gmi_a17_pb0,
+    gmi_a18_pb1, lcd_pwr0_pb2, lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5,
+    sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0, lcd_pwr1_pc1,
+    uart2_txd_pc2, uart2_rxd_pc3, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5,
+    lcd_pwr2_pc6, gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1, lcd_dc1_pd2,
+    sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5, vi_vsync_pd6, vi_hsync_pd7,
+    lcd_d0_pe0, lcd_d1_pe1, lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5,
+    lcd_d6_pe6, lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2, lcd_d11_pf3,
+    lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6, lcd_d15_pf7, gmi_ad0_pg0,
+    gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5,
+    gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
+    gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7,
+    gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2, gmi_cs6_n_pi3, gmi_rst_n_pi4,
+    gmi_iordy_pi5, gmi_cs7_n_pi6, gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1,
+    gmi_cs1_n_pj2, lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5,
+    uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs4_n_pk2,
+    gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5, spdif_in_pk6, gmi_a19_pk7,
+    vi_d2_pl0, vi_d3_pl1, vi_d4_pl2, vi_d5_pl3, vi_d6_pl4, vi_d7_pl5,
+    vi_d8_pl6, vi_d9_pl7, lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3,
+    lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7, dap1_fs_pn0,
+    dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, lcd_cs0_n_pn4, lcd_sdout_pn5,
+    lcd_dc0_pn6, hdmi_int_pn7, ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2,
+    ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
+    ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3,
+    dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0,
+    kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
+    kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2,
+    kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
+    kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4,
+    kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1,
+    vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
+    sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4, pu5, pu6, jtag_rtck_pu7, pv0,
+    pv1, pv2, pv3, ddc_scl_pv4, ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7,
+    lcd_cs1_n_pw0, lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4,
+    clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0, spi2_miso_px1,
+    spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4, spi1_sck_px5, spi1_cs0_n_px6,
+    spi1_miso_px7, ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3,
+    sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7,
+    sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3, lcd_sck_pz4,
+    sys_clk_req_pz5, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, sdmmc4_dat0_paa0,
+    sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
+    sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0,
+    cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7,
+    cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3, sdmmc4_clk_pcc4,
+    clk2_req_pcc5, pex_l2_rst_n_pcc6, pex_l2_clkreq_n_pcc7,
+    pex_l0_prsnt_n_pdd0, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2,
+    pex_wake_n_pdd3, pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5,
+    pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0, clk3_req_pee1,
+    clk1_req_pee2, hdmi_cec_pee3, clk_32k_in, core_pwr_req, cpu_pwr_req, owr,
+    pwr_int_n.
+
+  drive groups:
+
+    These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
+    nvidia,slew_rate-rising, nvidia,slew_rate-falling. Most but not all
+    support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode.
+
+    ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1,
+    dap2, dap3, dap4, dbg, ddc, dev3, gma, gmb, gmc, gmd, gme, gmf, gmg,
+    gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2,
+    uart3, uda, vi1.
+
+Example:
+
+	pinctrl@70000000 {
+		compatible = "nvidia,tegra30-pinmux";
+		reg = < 0x70000868 0xd0     /* Pad control registers */
+			0x70003000 0x3e0 >; /* Mux registers */
+	};
+
+Example board file extract:
+
+	pinctrl@70000000 {
+		sdmmc4_default: pinmux {
+			sdmmc4_clk_pcc4 {
+				nvidia,pins =	"sdmmc4_clk_pcc4",
+						"sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins =	"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+		};
+	};
+
+	sdhci@78000400 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc4_default>;
+	};
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@ -0,0 +1,128 @@
+== Introduction ==
+
+Hardware modules that control pin multiplexing or configuration parameters
+such as pull-up/down, tri-state, drive-strength etc are designated as pin
+controllers. Each pin controller must be represented as a node in device tree,
+just like any other hardware module.
+
+Hardware modules whose signals are affected by pin configuration are
+designated client devices. Again, each client device must be represented as a
+node in device tree, just like any other hardware module.
+
+For a client device to operate correctly, certain pin controllers must
+set up certain specific pin configurations. Some client devices need a
+single static pin configuration, e.g. set up during initialization. Others
+need to reconfigure pins at run-time, for example to tri-state pins when the
+device is inactive. Hence, each client device can define a set of named
+states. The number and names of those states is defined by the client device's
+own binding.
+
+The common pinctrl bindings defined in this file provide an infrastructure
+for client device device tree nodes to map those state names to the pin
+configuration used by those states.
+
+Note that pin controllers themselves may also be client devices of themselves.
+For example, a pin controller may set up its own "active" state when the
+driver loads. This would allow representing a board's static pin configuration
+in a single place, rather than splitting it across multiple client device
+nodes. The decision to do this or not somewhat rests with the author of
+individual board device tree files, and any requirements imposed by the
+bindings for the individual client devices in use by that board, i.e. whether
+they require certain specific named states for dynamic pin configuration.
+
+== Pinctrl client devices ==
+
+For each client device individually, every pin state is assigned an integer
+ID. These numbers start at 0, and are contiguous. For each state ID, a unique
+property exists to define the pin configuration. Each state may also be
+assigned a name. When names are used, another property exists to map from
+those names to the integer IDs.
+
+Each client device's own binding determines the set of states the must be
+defined in its device tree node, and whether to define the set of state
+IDs that must be provided, or whether to define the set of state names that
+must be provided.
+
+Required properties:
+pinctrl-0:	List of phandles, each pointing at a pin configuration
+		node. These referenced pin configuration nodes must be child
+		nodes of the pin controller that they configure. Multiple
+		entries may exist in this list so that multiple pin
+		controllers may be configured, or so that a state may be built
+		from multiple nodes for a single pin controller, each
+		contributing part of the overall configuration. See the next
+		section of this document for details of the format of these
+		pin configuration nodes.
+
+		In some cases, it may be useful to define a state, but for it
+		to be empty. This may be required when a common IP block is
+		used in an SoC either without a pin controller, or where the
+		pin controller does not affect the HW module in question. If
+		the binding for that IP block requires certain pin states to
+		exist, they must still be defined, but may be left empty.
+
+Optional properties:
+pinctrl-1:	List of phandles, each pointing at a pin configuration
+		node within a pin controller.
+...
+pinctrl-n:	List of phandles, each pointing at a pin configuration
+		node within a pin controller.
+pinctrl-names:	The list of names to assign states. List entry 0 defines the
+		name for integer state ID 0, list entry 1 for state ID 1, and
+		so on.
+
+For example:
+
+	/* For a client device requiring named states */
+	device {
+		pinctrl-names = "active", "idle";
+		pinctrl-0 = <&state_0_node_a>;
+		pinctrl-1 = <&state_1_node_a &state_1_node_b>;
+	};
+
+	/* For the same device if using state IDs */
+	device {
+		pinctrl-0 = <&state_0_node_a>;
+		pinctrl-1 = <&state_1_node_a &state_1_node_b>;
+	};
+
+	/*
+	 * For an IP block whose binding supports pin configuration,
+	 * but in use on an SoC that doesn't have any pin control hardware
+	 */
+	device {
+		pinctrl-names = "active", "idle";
+		pinctrl-0 = <>;
+		pinctrl-1 = <>;
+	};
+
+== Pin controller devices ==
+
+Pin controller devices should contain the pin configuration nodes that client
+devices reference.
+
+For example:
+
+	pincontroller {
+		... /* Standard DT properties for the device itself elided */
+
+		state_0_node_a {
+			...
+		};
+		state_1_node_a {
+			...
+		};
+		state_1_node_b {
+			...
+		};
+	}
+
+The contents of each of those pin configuration child nodes is defined
+entirely by the binding for the individual pin controller device. There
+exists no common standard for this content.
+
+The pin configuration nodes need not be direct children of the pin controller
+device; they may be grandchildren, for example. Whether this is legal, and
+whether there is any interaction between the child and intermediate parent
+nodes, is again defined entirely by the binding for the individual pin
+controller device.
--- a/Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt
+++ b/Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt
@ -1,5 +0,0 @@
-NVIDIA Tegra 2 pinmux controller
-
-Required properties:
- compatible : "nvidia,tegra20-pinmux"
-
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@ -276,3 +276,7 @@ REGULATOR
  devm_regulator_get()
  devm_regulator_put()
  devm_regulator_bulk_get()
+
+PINCTRL
+  devm_pinctrl_get()
+  devm_pinctrl_put()
--- a/Documentation/pinctrl.txt
+++ b/Documentation/pinctrl.txt
@ -152,11 +152,9 @@ static const struct foo_group foo_groups[] = {
 };


-static int foo_list_groups(struct pinctrl_dev *pctldev, unsigned selector)
+static int foo_get_groups_count(struct pinctrl_dev *pctldev)
 {
-	if (selector >= ARRAY_SIZE(foo_groups))
-		return -EINVAL;
-	return 0;
+	return ARRAY_SIZE(foo_groups);
 }

 static const char *foo_get_group_name(struct pinctrl_dev *pctldev,
@ -175,7 +173,7 @@ static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
 }

 static struct pinctrl_ops foo_pctrl_ops = {
-	.list_groups = foo_list_groups,
+	.get_groups_count = foo_get_groups_count,
 	.get_group_name = foo_get_group_name,
 	.get_group_pins = foo_get_group_pins,
 };
@ -186,13 +184,12 @@ static struct pinctrl_desc foo_desc = {
       .pctlops = &foo_pctrl_ops,
 };

-The pin control subsystem will call the .list_groups() function repeatedly
-beginning on 0 until it returns non-zero to determine legal selectors, then
-it will call the other functions to retrieve the name and pins of the group.
-Maintaining the data structure of the groups is up to the driver, this is
-just a simple example - in practice you may need more entries in your group
-structure, for example specific register ranges associated with each group
-and so on.
+The pin control subsystem will call the .get_groups_count() function to
+determine total number of legal selectors, then it will call the other functions
+to retrieve the name and pins of the group. Maintaining the data structure of
+the groups is up to the driver, this is just a simple example - in practice you
+may need more entries in your group structure, for example specific register
+ranges associated with each group and so on.


 Pin configuration
@ -606,11 +603,9 @@ static const struct foo_group foo_groups[] = {
 };


-static int foo_list_groups(struct pinctrl_dev *pctldev, unsigned selector)
+static int foo_get_groups_count(struct pinctrl_dev *pctldev)
 {
-	if (selector >= ARRAY_SIZE(foo_groups))
-		return -EINVAL;
-	return 0;
+	return ARRAY_SIZE(foo_groups);
 }

 static const char *foo_get_group_name(struct pinctrl_dev *pctldev,
@ -629,7 +624,7 @@ static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
 }

 static struct pinctrl_ops foo_pctrl_ops = {
-	.list_groups = foo_list_groups,
+	.get_groups_count = foo_get_groups_count,
 	.get_group_name = foo_get_group_name,
 	.get_group_pins = foo_get_group_pins,
 };
@ -640,7 +635,7 @@ struct foo_pmx_func {
 	const unsigned num_groups;
 };

-static const char * const spi0_groups[] = { "spi0_1_grp" };
+static const char * const spi0_groups[] = { "spi0_0_grp", "spi0_1_grp" };
 static const char * const i2c0_groups[] = { "i2c0_grp" };
 static const char * const mmc0_groups[] = { "mmc0_1_grp", "mmc0_2_grp",
 					"mmc0_3_grp" };
@ -663,11 +658,9 @@ static const struct foo_pmx_func foo_functions[] = {
 	},
 };

-int foo_list_funcs(struct pinctrl_dev *pctldev, unsigned selector)
+int foo_get_functions_count(struct pinctrl_dev *pctldev)
 {
-	if (selector >= ARRAY_SIZE(foo_functions))
-		return -EINVAL;
-	return 0;
+	return ARRAY_SIZE(foo_functions);
 }

 const char *foo_get_fname(struct pinctrl_dev *pctldev, unsigned selector)
@ -703,7 +696,7 @@ void foo_disable(struct pinctrl_dev *pctldev, unsigned selector,
 }

 struct pinmux_ops foo_pmxops = {
-	.list_functions = foo_list_funcs,
+	.get_functions_count = foo_get_functions_count,
 	.get_function_name = foo_get_fname,
 	.get_function_groups = foo_get_groups,
 	.enable = foo_enable,
@ -786,7 +779,7 @@ and spi on the second function mapping:

 #include <linux/pinctrl/machine.h>

-static const struct pinctrl_map __initdata mapping[] = {
+static const struct pinctrl_map mapping[] __initconst = {
 	{
 		.dev_name = "foo-spi.0",
 		.name = PINCTRL_STATE_DEFAULT,
@ -952,13 +945,13 @@ case), we define a mapping like this:
 The result of grabbing this mapping from the device with something like
 this (see next paragraph):

-	p = pinctrl_get(dev);
+	p = devm_pinctrl_get(dev);
 	s = pinctrl_lookup_state(p, "8bit");
 	ret = pinctrl_select_state(p, s);

 or more simply:

-	p = pinctrl_get_select(dev, "8bit");
+	p = devm_pinctrl_get_select(dev, "8bit");

 Will be that you activate all the three bottom records in the mapping at
 once. Since they share the same name, pin controller device, function and
@ -992,7 +985,7 @@ foo_probe()
 	/* Allocate a state holder named "foo" etc */
 	struct foo_state *foo = ...;

-	foo->p = pinctrl_get(&device);
+	foo->p = devm_pinctrl_get(&device);
 	if (IS_ERR(foo->p)) {
 		/* FIXME: clean up "foo" here */
 		return PTR_ERR(foo->p);
@ -1000,24 +993,17 @@ foo_probe()

 	foo->s = pinctrl_lookup_state(foo->p, PINCTRL_STATE_DEFAULT);
 	if (IS_ERR(foo->s)) {
-		pinctrl_put(foo->p);
 		/* FIXME: clean up "foo" here */
 		return PTR_ERR(s);
 	}

 	ret = pinctrl_select_state(foo->s);
 	if (ret < 0) {
-		pinctrl_put(foo->p);
 		/* FIXME: clean up "foo" here */
 		return ret;
 	}
 }

-foo_remove()
-{
-	pinctrl_put(state->p);
-}
-
 This get/lookup/select/put sequence can just as well be handled by bus drivers
 if you don't want each and every driver to handle it and you know the
 arrangement on your bus.
@ -1029,6 +1015,11 @@ The semantics of the pinctrl APIs are:
  kernel memory to hold the pinmux state. All mapping table parsing or similar
  slow operations take place within this API.

+- devm_pinctrl_get() is a variant of pinctrl_get() that causes pinctrl_put()
+  to be called automatically on the retrieved pointer when the associated
+  device is removed. It is recommended to use this function over plain
+  pinctrl_get().
+
 - pinctrl_lookup_state() is called in process context to obtain a handle to a
  specific state for a the client device. This operation may be slow too.

@ -1041,14 +1032,30 @@ The semantics of the pinctrl APIs are:

 - pinctrl_put() frees all information associated with a pinctrl handle.

+- devm_pinctrl_put() is a variant of pinctrl_put() that may be used to
+  explicitly destroy a pinctrl object returned by devm_pinctrl_get().
+  However, use of this function will be rare, due to the automatic cleanup
+  that will occur even without calling it.
+
+  pinctrl_get() must be paired with a plain pinctrl_put().
+  pinctrl_get() may not be paired with devm_pinctrl_put().
+  devm_pinctrl_get() can optionally be paired with devm_pinctrl_put().
+  devm_pinctrl_get() may not be paired with plain pinctrl_put().
+
 Usually the pin control core handled the get/put pair and call out to the
 device drivers bookkeeping operations, like checking available functions and
 the associated pins, whereas the enable/disable pass on to the pin controller
 driver which takes care of activating and/or deactivating the mux setting by
 quickly poking some registers.

-The pins are allocated for your device when you issue the pinctrl_get() call,
-after this you should be able to see this in the debugfs listing of all pins.
+The pins are allocated for your device when you issue the devm_pinctrl_get()
+call, after this you should be able to see this in the debugfs listing of all
+pins.
+
+NOTE: the pinctrl system will return -EPROBE_DEFER if it cannot find the
+requested pinctrl handles, for example if the pinctrl driver has not yet
+registered. Thus make sure that the error path in your driver gracefully
+cleans up and is ready to retry the probing later in the startup process.


 System pin control hogging
@ -1094,13 +1101,13 @@ it, disables and releases it, and muxes it in on the pins defined by group B:

 #include <linux/pinctrl/consumer.h>

-foo_switch()
-{
-	struct pinctrl *p;
-	struct pinctrl_state *s1, *s2;
+struct pinctrl *p;
+struct pinctrl_state *s1, *s2;

+foo_probe()
+{
 	/* Setup */
-	p = pinctrl_get(&device);
+	p = devm_pinctrl_get(&device);
 	if (IS_ERR(p))
 		...

@ -1111,7 +1118,10 @@ foo_switch()
 	s2 = pinctrl_lookup_state(foo->p, "pos-B");
 	if (IS_ERR(s2))
 		...
+}

+foo_switch()
+{
 	/* Enable on position A */
 	ret = pinctrl_select_state(s1);
 	if (ret < 0)
@ -1125,8 +1135,6 @@ foo_switch()
 	    ...

 	...
-
-	pinctrl_put(p);
 }

 The above has to be done from process context.
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@ -1260,3 +1260,44 @@ int of_alias_get_id(struct device_node *np, const char *stem)
 	return id;
 }
 EXPORT_SYMBOL_GPL(of_alias_get_id);
+
+const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur,
+			       u32 *pu)
+{
+	const void *curv = cur;
+
+	if (!prop)
+		return NULL;
+
+	if (!cur) {
+		curv = prop->value;
+		goto out_val;
+	}
+
+	curv += sizeof(*cur);
+	if (curv >= prop->value + prop->length)
+		return NULL;
+
+out_val:
+	*pu = be32_to_cpup(curv);
+	return curv;
+}
+EXPORT_SYMBOL_GPL(of_prop_next_u32);
+
+const char *of_prop_next_string(struct property *prop, const char *cur)
+{
+	const void *curv = cur;
+
+	if (!prop)
+		return NULL;
+
+	if (!cur)
+		return prop->value;
+
+	curv += strlen(cur) + 1;
+	if (curv >= prop->value + prop->length)
+		return NULL;
+
+	return curv;
+}
+EXPORT_SYMBOL_GPL(of_prop_next_string);
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@ -4,7 +4,6 @@

 config PINCTRL
 	bool
-	depends on EXPERIMENTAL

 if PINCTRL

--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@ -5,6 +5,9 @@ ccflags-$(CONFIG_DEBUG_PINCTRL)	+= -DDEBUG
 obj-$(CONFIG_PINCTRL)		+= core.o
 obj-$(CONFIG_PINMUX)		+= pinmux.o
 obj-$(CONFIG_PINCONF)		+= pinconf.o
+ifeq ($(CONFIG_OF),y)
+obj-$(CONFIG_PINCTRL)		+= devicetree.o
+endif
 obj-$(CONFIG_GENERIC_PINCONF)	+= pinconf-generic.o
 obj-$(CONFIG_PINCTRL_PXA3xx)	+= pinctrl-pxa3xx.o
 obj-$(CONFIG_PINCTRL_MMP2)	+= pinctrl-mmp2.o
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@ -23,9 +23,11 @@
 #include <linux/sysfs.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/machine.h>
 #include "core.h"
+#include "devicetree.h"
 #include "pinmux.h"
 #include "pinconf.h"

@ -45,7 +47,7 @@ struct pinctrl_maps {
 DEFINE_MUTEX(pinctrl_mutex);

 /* Global list of pin control devices (struct pinctrl_dev) */
-static LIST_HEAD(pinctrldev_list);
+LIST_HEAD(pinctrldev_list);

 /* List of pin controller handles (struct pinctrl) */
 static LIST_HEAD(pinctrl_list);
@ -123,6 +125,25 @@ int pin_get_from_name(struct pinctrl_dev *pctldev, const char *name)
 	return -EINVAL;
 }

+/**
+ * pin_get_name_from_id() - look up a pin name from a pin id
+ * @pctldev: the pin control device to lookup the pin on
+ * @name: the name of the pin to look up
+ */
+const char *pin_get_name(struct pinctrl_dev *pctldev, const unsigned pin)
+{
+	const struct pin_desc *desc;
+
+	desc = pin_desc_get(pctldev, pin);
+	if (desc == NULL) {
+		dev_err(pctldev->dev, "failed to get pin(%d) name\n",
+			pin);
+		return NULL;
+	}
+
+	return desc->name;
+}
+
 /**
 * pin_is_valid() - check if pin exists on controller
 * @pctldev: the pin control device to check the pin on
@ -318,9 +339,10 @@ int pinctrl_get_group_selector(struct pinctrl_dev *pctldev,
 			       const char *pin_group)
 {
 	const struct pinctrl_ops *pctlops = pctldev->desc->pctlops;
+	unsigned ngroups = pctlops->get_groups_count(pctldev);
 	unsigned group_selector = 0;

-	while (pctlops->list_groups(pctldev, group_selector) >= 0) {
+	while (group_selector < ngroups) {
 		const char *gname = pctlops->get_group_name(pctldev,
 							    group_selector);
 		if (!strcmp(gname, pin_group)) {
@ -516,11 +538,14 @@ static int add_setting(struct pinctrl *p, struct pinctrl_map const *map)

 	setting->pctldev = get_pinctrl_dev_from_devname(map->ctrl_dev_name);
 	if (setting->pctldev == NULL) {
-		dev_err(p->dev, "unknown pinctrl device %s in map entry",
+		dev_info(p->dev, "unknown pinctrl device %s in map entry, deferring probe",
 			map->ctrl_dev_name);
 		kfree(setting);
-		/* Eventually, this should trigger deferred probe */
-		return -ENODEV;
+		/*
+		 * OK let us guess that the driver is not there yet, and
+		 * let's defer obtaining this pinctrl handle to later...
+		 */
+		return -EPROBE_DEFER;
 	}

 	switch (map->type) {
@ -579,6 +604,13 @@ static struct pinctrl *create_pinctrl(struct device *dev)
 	}
 	p->dev = dev;
 	INIT_LIST_HEAD(&p->states);
+	INIT_LIST_HEAD(&p->dt_maps);
+
+	ret = pinctrl_dt_to_map(p);
+	if (ret < 0) {
+		kfree(p);
+		return ERR_PTR(ret);
+	}

 	devname = dev_name(dev);

@ -662,6 +694,8 @@ static void pinctrl_put_locked(struct pinctrl *p, bool inlist)
 		kfree(state);
 	}

+	pinctrl_dt_free_maps(p);
+
 	if (inlist)
 		list_del(&p->node);
 	kfree(p);
@ -787,15 +821,63 @@ int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *state)
 }
 EXPORT_SYMBOL_GPL(pinctrl_select_state);

+static void devm_pinctrl_release(struct device *dev, void *res)
+{
+	pinctrl_put(*(struct pinctrl **)res);
+}
+
 /**
- * pinctrl_register_mappings() - register a set of pin controller mappings
- * @maps: the pincontrol mappings table to register. This should probably be
- *	marked with __initdata so it can be discarded after boot. This
- *	function will perform a shallow copy for the mapping entries.
- * @num_maps: the number of maps in the mapping table
+ * struct devm_pinctrl_get() - Resource managed pinctrl_get()
+ * @dev: the device to obtain the handle for
+ *
+ * If there is a need to explicitly destroy the returned struct pinctrl,
+ * devm_pinctrl_put() should be used, rather than plain pinctrl_put().
 */
-int pinctrl_register_mappings(struct pinctrl_map const *maps,
-			      unsigned num_maps)
+struct pinctrl *devm_pinctrl_get(struct device *dev)
+{
+	struct pinctrl **ptr, *p;
+
+	ptr = devres_alloc(devm_pinctrl_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	p = pinctrl_get(dev);
+	if (!IS_ERR(p)) {
+		*ptr = p;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return p;
+}
+EXPORT_SYMBOL_GPL(devm_pinctrl_get);
+
+static int devm_pinctrl_match(struct device *dev, void *res, void *data)
+{
+	struct pinctrl **p = res;
+
+	return *p == data;
+}
+
+/**
+ * devm_pinctrl_put() - Resource managed pinctrl_put()
+ * @p: the pinctrl handle to release
+ *
+ * Deallocate a struct pinctrl obtained via devm_pinctrl_get(). Normally
+ * this function will not need to be called and the resource management
+ * code will ensure that the resource is freed.
+ */
+void devm_pinctrl_put(struct pinctrl *p)
+{
+	WARN_ON(devres_destroy(p->dev, devm_pinctrl_release,
+			       devm_pinctrl_match, p));
+	pinctrl_put(p);
+}
+EXPORT_SYMBOL_GPL(devm_pinctrl_put);
+
+int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps,
+			 bool dup, bool locked)
 {
 	int i, ret;
 	struct pinctrl_maps *maps_node;
@ -851,20 +933,52 @@ int pinctrl_register_mappings(struct pinctrl_map const *maps,
 	}

 	maps_node->num_maps = num_maps;
-	maps_node->maps = kmemdup(maps, sizeof(*maps) * num_maps, GFP_KERNEL);
-	if (!maps_node->maps) {
-		pr_err("failed to duplicate mapping table\n");
-		kfree(maps_node);
-		return -ENOMEM;
+	if (dup) {
+		maps_node->maps = kmemdup(maps, sizeof(*maps) * num_maps,
+					  GFP_KERNEL);
+		if (!maps_node->maps) {
+			pr_err("failed to duplicate mapping table\n");
+			kfree(maps_node);
+			return -ENOMEM;
+		}
+	} else {
+		maps_node->maps = maps;
 	}

-	mutex_lock(&pinctrl_mutex);
+	if (!locked)
+		mutex_lock(&pinctrl_mutex);
 	list_add_tail(&maps_node->node, &pinctrl_maps);
-	mutex_unlock(&pinctrl_mutex);
+	if (!locked)
+		mutex_unlock(&pinctrl_mutex);

 	return 0;
 }

+/**
+ * pinctrl_register_mappings() - register a set of pin controller mappings
+ * @maps: the pincontrol mappings table to register. This should probably be
+ *	marked with __initdata so it can be discarded after boot. This
+ *	function will perform a shallow copy for the mapping entries.
+ * @num_maps: the number of maps in the mapping table
+ */
+int pinctrl_register_mappings(struct pinctrl_map const *maps,
+			      unsigned num_maps)
+{
+	return pinctrl_register_map(maps, num_maps, true, false);
+}
+
+void pinctrl_unregister_map(struct pinctrl_map const *map)
+{
+	struct pinctrl_maps *maps_node;
+
+	list_for_each_entry(maps_node, &pinctrl_maps, node) {
+		if (maps_node->maps == map) {
+			list_del(&maps_node->node);
+			return;
+		}
+	}
+}
+
 #ifdef CONFIG_DEBUG_FS

 static int pinctrl_pins_show(struct seq_file *s, void *what)
@ -906,15 +1020,17 @@ static int pinctrl_groups_show(struct seq_file *s, void *what)
 {
 	struct pinctrl_dev *pctldev = s->private;
 	const struct pinctrl_ops *ops = pctldev->desc->pctlops;
-	unsigned selector = 0;
+	unsigned ngroups, selector = 0;

+	ngroups = ops->get_groups_count(pctldev);
 	mutex_lock(&pinctrl_mutex);

 	seq_puts(s, "registered pin groups:\n");
-	while (ops->list_groups(pctldev, selector) >= 0) {
+	while (selector < ngroups) {
 		const unsigned *pins;
 		unsigned num_pins;
 		const char *gname = ops->get_group_name(pctldev, selector);
+		const char *pname;
 		int ret;
 		int i;

@ -924,10 +1040,14 @@ static int pinctrl_groups_show(struct seq_file *s, void *what)
 			seq_printf(s, "%s [ERROR GETTING PINS]\n",
 				   gname);
 		else {
-			seq_printf(s, "group: %s, pins = [ ", gname);
-			for (i = 0; i < num_pins; i++)
-				seq_printf(s, "%d ", pins[i]);
-			seq_puts(s, "]\n");
+			seq_printf(s, "group: %s\n", gname);
+			for (i = 0; i < num_pins; i++) {
+				pname = pin_get_name(pctldev, pins[i]);
+				if (WARN_ON(!pname))
+					return -EINVAL;
+				seq_printf(s, "pin %d (%s)\n", pins[i], pname);
+			}
+			seq_puts(s, "\n");
 		}
 		selector++;
 	}
@ -1226,11 +1346,14 @@ static int pinctrl_check_ops(struct pinctrl_dev *pctldev)
 	const struct pinctrl_ops *ops = pctldev->desc->pctlops;

 	if (!ops ||
-	    !ops->list_groups ||
+	    !ops->get_groups_count ||
 	    !ops->get_group_name ||
 	    !ops->get_group_pins)
 		return -EINVAL;

+	if (ops->dt_node_to_map && !ops->dt_free_map)
+		return -EINVAL;
+
 	return 0;
 }

--- a/drivers/pinctrl/core.h
+++ b/drivers/pinctrl/core.h
@ -52,12 +52,15 @@ struct pinctrl_dev {
 * @dev: the device using this pin control handle
 * @states: a list of states for this device
 * @state: the current state
+ * @dt_maps: the mapping table chunks dynamically parsed from device tree for
+ *	this device, if any
 */
 struct pinctrl {
 	struct list_head node;
 	struct device *dev;
 	struct list_head states;
 	struct pinctrl_state *state;
+	struct list_head dt_maps;
 };

 /**
@ -100,7 +103,8 @@ struct pinctrl_setting_configs {
 * struct pinctrl_setting - an individual mux or config setting
 * @node: list node for struct pinctrl_settings's @settings field
 * @type: the type of setting
- * @pctldev: pin control device handling to be programmed
+ * @pctldev: pin control device handling to be programmed. Not used for
+ *   PIN_MAP_TYPE_DUMMY_STATE.
 * @data: Data specific to the setting type
 */
 struct pinctrl_setting {
@ -144,6 +148,7 @@ struct pin_desc {

 struct pinctrl_dev *get_pinctrl_dev_from_devname(const char *dev_name);
 int pin_get_from_name(struct pinctrl_dev *pctldev, const char *name);
+const char *pin_get_name(struct pinctrl_dev *pctldev, const unsigned pin);
 int pinctrl_get_group_selector(struct pinctrl_dev *pctldev,
 			       const char *pin_group);

@ -153,4 +158,9 @@ static inline struct pin_desc *pin_desc_get(struct pinctrl_dev *pctldev,
 	return radix_tree_lookup(&pctldev->pin_desc_tree, pin);
 }

+int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps,
+			 bool dup, bool locked);
+void pinctrl_unregister_map(struct pinctrl_map const *map);
+
 extern struct mutex pinctrl_mutex;
+extern struct list_head pinctrldev_list;
--- a/drivers/pinctrl/devicetree.c
+++ b/drivers/pinctrl/devicetree.c
@ -0,0 +1,249 @@
+/*
+ * Device tree integration for the pin control subsystem
+ *
+ * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/slab.h>
+
+#include "core.h"
+#include "devicetree.h"
+
+/**
+ * struct pinctrl_dt_map - mapping table chunk parsed from device tree
+ * @node: list node for struct pinctrl's @dt_maps field
+ * @pctldev: the pin controller that allocated this struct, and will free it
+ * @maps: the mapping table entries
+ */
+struct pinctrl_dt_map {
+	struct list_head node;
+	struct pinctrl_dev *pctldev;
+	struct pinctrl_map *map;
+	unsigned num_maps;
+};
+
+static void dt_free_map(struct pinctrl_dev *pctldev,
+		     struct pinctrl_map *map, unsigned num_maps)
+{
+	if (pctldev) {
+		struct pinctrl_ops *ops = pctldev->desc->pctlops;
+		ops->dt_free_map(pctldev, map, num_maps);
+	} else {
+		/* There is no pctldev for PIN_MAP_TYPE_DUMMY_STATE */
+		kfree(map);
+	}
+}
+
+void pinctrl_dt_free_maps(struct pinctrl *p)
+{
+	struct pinctrl_dt_map *dt_map, *n1;
+
+	list_for_each_entry_safe(dt_map, n1, &p->dt_maps, node) {
+		pinctrl_unregister_map(dt_map->map);
+		list_del(&dt_map->node);
+		dt_free_map(dt_map->pctldev, dt_map->map,
+			    dt_map->num_maps);
+		kfree(dt_map);
+	}
+
+	of_node_put(p->dev->of_node);
+}
+
+static int dt_remember_or_free_map(struct pinctrl *p, const char *statename,
+				   struct pinctrl_dev *pctldev,
+				   struct pinctrl_map *map, unsigned num_maps)
+{
+	int i;
+	struct pinctrl_dt_map *dt_map;
+
+	/* Initialize common mapping table entry fields */
+	for (i = 0; i < num_maps; i++) {
+		map[i].dev_name = dev_name(p->dev);
+		map[i].name = statename;
+		if (pctldev)
+			map[i].ctrl_dev_name = dev_name(pctldev->dev);
+	}
+
+	/* Remember the converted mapping table entries */
+	dt_map = kzalloc(sizeof(*dt_map), GFP_KERNEL);
+	if (!dt_map) {
+		dev_err(p->dev, "failed to alloc struct pinctrl_dt_map\n");
+		dt_free_map(pctldev, map, num_maps);
+		return -ENOMEM;
+	}
+
+	dt_map->pctldev = pctldev;
+	dt_map->map = map;
+	dt_map->num_maps = num_maps;
+	list_add_tail(&dt_map->node, &p->dt_maps);
+
+	return pinctrl_register_map(map, num_maps, false, true);
+}
+
+static struct pinctrl_dev *find_pinctrl_by_of_node(struct device_node *np)
+{
+	struct pinctrl_dev *pctldev;
+
+	list_for_each_entry(pctldev, &pinctrldev_list, node)
+		if (pctldev->dev->of_node == np)
+			return pctldev;
+
+	return NULL;
+}
+
+static int dt_to_map_one_config(struct pinctrl *p, const char *statename,
+				struct device_node *np_config)
+{
+	struct device_node *np_pctldev;
+	struct pinctrl_dev *pctldev;
+	struct pinctrl_ops *ops;
+	int ret;
+	struct pinctrl_map *map;
+	unsigned num_maps;
+
+	/* Find the pin controller containing np_config */
+	np_pctldev = of_node_get(np_config);
+	for (;;) {
+		np_pctldev = of_get_next_parent(np_pctldev);
+		if (!np_pctldev || of_node_is_root(np_pctldev)) {
+			dev_info(p->dev, "could not find pctldev for node %s, deferring probe\n",
+				np_config->full_name);
+			of_node_put(np_pctldev);
+			/* OK let's just assume this will appear later then */
+			return -EPROBE_DEFER;
+		}
+		pctldev = find_pinctrl_by_of_node(np_pctldev);
+		if (pctldev)
+			break;
+	}
+	of_node_put(np_pctldev);
+
+	/*
+	 * Call pinctrl driver to parse device tree node, and
+	 * generate mapping table entries
+	 */
+	ops = pctldev->desc->pctlops;
+	if (!ops->dt_node_to_map) {
+		dev_err(p->dev, "pctldev %s doesn't support DT\n",
+			dev_name(pctldev->dev));
+		return -ENODEV;
+	}
+	ret = ops->dt_node_to_map(pctldev, np_config, &map, &num_maps);
+	if (ret < 0)
+		return ret;
+
+	/* Stash the mapping table chunk away for later use */
+	return dt_remember_or_free_map(p, statename, pctldev, map, num_maps);
+}
+
+static int dt_remember_dummy_state(struct pinctrl *p, const char *statename)
+{
+	struct pinctrl_map *map;
+
+	map = kzalloc(sizeof(*map), GFP_KERNEL);
+	if (!map) {
+		dev_err(p->dev, "failed to alloc struct pinctrl_map\n");
+		return -ENOMEM;
+	}
+
+	/* There is no pctldev for PIN_MAP_TYPE_DUMMY_STATE */
+	map->type = PIN_MAP_TYPE_DUMMY_STATE;
+
+	return dt_remember_or_free_map(p, statename, NULL, map, 1);
+}
+
+int pinctrl_dt_to_map(struct pinctrl *p)
+{
+	struct device_node *np = p->dev->of_node;
+	int state, ret;
+	char *propname;
+	struct property *prop;
+	const char *statename;
+	const __be32 *list;
+	int size, config;
+	phandle phandle;
+	struct device_node *np_config;
+
+	/* CONFIG_OF enabled, p->dev not instantiated from DT */
+	if (!np) {
+		dev_dbg(p->dev, "no of_node; not parsing pinctrl DT\n");
+		return 0;
+	}
+
+	/* We may store pointers to property names within the node */
+	of_node_get(np);
+
+	/* For each defined state ID */
+	for (state = 0; ; state++) {
+		/* Retrieve the pinctrl-* property */
+		propname = kasprintf(GFP_KERNEL, "pinctrl-%d", state);
+		prop = of_find_property(np, propname, &size);
+		kfree(propname);
+		if (!prop)
+			break;
+		list = prop->value;
+		size /= sizeof(*list);
+
+		/* Determine whether pinctrl-names property names the state */
+		ret = of_property_read_string_index(np, "pinctrl-names",
+						    state, &statename);
+		/*
+		 * If not, statename is just the integer state ID. But rather
+		 * than dynamically allocate it and have to free it later,
+		 * just point part way into the property name for the string.
+		 */
+		if (ret < 0) {
+			/* strlen("pinctrl-") == 8 */
+			statename = prop->name + 8;
+		}
+
+		/* For every referenced pin configuration node in it */
+		for (config = 0; config < size; config++) {
+			phandle = be32_to_cpup(list++);
+
+			/* Look up the pin configuration node */
+			np_config = of_find_node_by_phandle(phandle);
+			if (!np_config) {
+				dev_err(p->dev,
+					"prop %s index %i invalid phandle\n",
+					prop->name, config);
+				ret = -EINVAL;
+				goto err;
+			}
+
+			/* Parse the node */
+			ret = dt_to_map_one_config(p, statename, np_config);
+			of_node_put(np_config);
+			if (ret < 0)
+				goto err;
+		}
+
+		/* No entries in DT? Generate a dummy state table entry */
+		if (!size) {
+			ret = dt_remember_dummy_state(p, statename);
+			if (ret < 0)
+				goto err;
+		}
+	}
+
+	return 0;
+
+err:
+	pinctrl_dt_free_maps(p);
+	return ret;
+}
--- a/drivers/pinctrl/devicetree.h
+++ b/drivers/pinctrl/devicetree.h
@ -0,0 +1,35 @@
+/*
+ * Internal interface to pinctrl device tree integration
+ *
+ * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef CONFIG_OF
+
+void pinctrl_dt_free_maps(struct pinctrl *p);
+int pinctrl_dt_to_map(struct pinctrl *p);
+
+#else
+
+static inline int pinctrl_dt_to_map(struct pinctrl *p)
+{
+	return 0;
+}
+
+static inline void pinctrl_dt_free_maps(struct pinctrl *p)
+{
+}
+
+#endif
--- a/drivers/pinctrl/pinconf.c
+++ b/drivers/pinctrl/pinconf.c
@ -379,8 +379,16 @@ int pinconf_apply_setting(struct pinctrl_setting const *setting)

 void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map)
 {
+	struct pinctrl_dev *pctldev;
+	const struct pinconf_ops *confops;
 	int i;

+	pctldev = get_pinctrl_dev_from_devname(map->ctrl_dev_name);
+	if (pctldev)
+		confops = pctldev->desc->confops;
+	else
+		confops = NULL;
+
 	switch (map->type) {
 	case PIN_MAP_TYPE_CONFIGS_PIN:
 		seq_printf(s, "pin ");
@ -394,8 +402,15 @@ void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map)

 	seq_printf(s, "%s\n", map->data.configs.group_or_pin);

-	for (i = 0; i < map->data.configs.num_configs; i++)
-		seq_printf(s, "config %08lx\n", map->data.configs.configs[i]);
+	for (i = 0; i < map->data.configs.num_configs; i++) {
+		seq_printf(s, "config ");
+		if (confops && confops->pin_config_config_dbg_show)
+			confops->pin_config_config_dbg_show(pctldev, s,
+						map->data.configs.configs[i]);
+		else
+			seq_printf(s, "%08lx", map->data.configs.configs[i]);
+		seq_printf(s, "\n");
+	}
 }

 void pinconf_show_setting(struct seq_file *s,
@ -403,6 +418,7 @@ void pinconf_show_setting(struct seq_file *s,
 {
 	struct pinctrl_dev *pctldev = setting->pctldev;
 	const struct pinctrl_ops *pctlops = pctldev->desc->pctlops;
+	const struct pinconf_ops *confops = pctldev->desc->confops;
 	struct pin_desc *desc;
 	int i;

@ -428,8 +444,15 @@ void pinconf_show_setting(struct seq_file *s,
 	 * FIXME: We should really get the pin controler to dump the config
 	 * values, so they can be decoded to something meaningful.
 	 */
-	for (i = 0; i < setting->data.configs.num_configs; i++)
-		seq_printf(s, " %08lx", setting->data.configs.configs[i]);
+	for (i = 0; i < setting->data.configs.num_configs; i++) {
+		seq_printf(s, " ");
+		if (confops && confops->pin_config_config_dbg_show)
+			confops->pin_config_config_dbg_show(pctldev, s,
+				setting->data.configs.configs[i]);
+		else
+			seq_printf(s, "%08lx",
+				   setting->data.configs.configs[i]);
+	}

 	seq_printf(s, "\n");
 }
@ -448,10 +471,14 @@ static void pinconf_dump_pin(struct pinctrl_dev *pctldev,
 static int pinconf_pins_show(struct seq_file *s, void *what)
 {
 	struct pinctrl_dev *pctldev = s->private;
+	const struct pinconf_ops *ops = pctldev->desc->confops;
 	unsigned i, pin;

+	if (!ops || !ops->pin_config_get)
+		return 0;
+
 	seq_puts(s, "Pin config settings per pin\n");
-	seq_puts(s, "Format: pin (name): pinmux setting array\n");
+	seq_puts(s, "Format: pin (name): configs\n");

 	mutex_lock(&pinctrl_mutex);

@ -495,17 +522,18 @@ static int pinconf_groups_show(struct seq_file *s, void *what)
 	struct pinctrl_dev *pctldev = s->private;
 	const struct pinctrl_ops *pctlops = pctldev->desc->pctlops;
 	const struct pinconf_ops *ops = pctldev->desc->confops;
+	unsigned ngroups = pctlops->get_groups_count(pctldev);
 	unsigned selector = 0;

 	if (!ops || !ops->pin_config_group_get)
 		return 0;

 	seq_puts(s, "Pin config settings per pin group\n");
-	seq_puts(s, "Format: group (name): pinmux setting array\n");
+	seq_puts(s, "Format: group (name): configs\n");

 	mutex_lock(&pinctrl_mutex);

-	while (pctlops->list_groups(pctldev, selector) >= 0) {
+	while (selector < ngroups) {
 		const char *gname = pctlops->get_group_name(pctldev, selector);

 		seq_printf(s, "%u (%s):", selector, gname);
--- a/drivers/pinctrl/pinconf.h
+++ b/drivers/pinctrl/pinconf.h
@ -19,11 +19,6 @@ int pinconf_map_to_setting(struct pinctrl_map const *map,
 			  struct pinctrl_setting *setting);
 void pinconf_free_setting(struct pinctrl_setting const *setting);
 int pinconf_apply_setting(struct pinctrl_setting const *setting);
-void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map);
-void pinconf_show_setting(struct seq_file *s,
-			  struct pinctrl_setting const *setting);
-void pinconf_init_device_debugfs(struct dentry *devroot,
-				 struct pinctrl_dev *pctldev);

 /*
 * You will only be interested in these if you're using PINCONF
@ -61,6 +56,18 @@ static inline int pinconf_apply_setting(struct pinctrl_setting const *setting)
 	return 0;
 }

+#endif
+
+#if defined(CONFIG_PINCONF) && defined(CONFIG_DEBUG_FS)
+
+void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map);
+void pinconf_show_setting(struct seq_file *s,
+			  struct pinctrl_setting const *setting);
+void pinconf_init_device_debugfs(struct dentry *devroot,
+				 struct pinctrl_dev *pctldev);
+
+#else
+
 static inline void pinconf_show_map(struct seq_file *s,
 				    struct pinctrl_map const *map)
 {
--- a/drivers/pinctrl/pinctrl-coh901.c
+++ b/drivers/pinctrl/pinctrl-coh901.c
@ -174,7 +174,7 @@ struct u300_gpio_confdata {


 /* Initial configuration */
-static const struct __initdata u300_gpio_confdata
+static const struct __initconst u300_gpio_confdata
 bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
 	/* Port 0, pins 0-7 */
 	{
@ -255,7 +255,7 @@ bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
 	}
 };

-static const struct __initdata u300_gpio_confdata
+static const struct __initconst u300_gpio_confdata
 bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
 	/* Port 0, pins 0-7 */
 	{
--- a/drivers/pinctrl/pinctrl-pxa3xx.c
+++ b/drivers/pinctrl/pinctrl-pxa3xx.c
@ -25,20 +25,18 @@ static struct pinctrl_gpio_range pxa3xx_pinctrl_gpio_range = {
 	.pin_base	= 0,
 };

-static int pxa3xx_list_groups(struct pinctrl_dev *pctrldev, unsigned selector)
+static int pxa3xx_get_groups_count(struct pinctrl_dev *pctrldev)
 {
 	struct pxa3xx_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
-	if (selector >= info->num_grps)
-		return -EINVAL;
-	return 0;
+
+	return info->num_grps;
 }

 static const char *pxa3xx_get_group_name(struct pinctrl_dev *pctrldev,
 					 unsigned selector)
 {
 	struct pxa3xx_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
-	if (selector >= info->num_grps)
-		return NULL;
+
 	return info->grps[selector].name;
 }

@ -48,25 +46,23 @@ static int pxa3xx_get_group_pins(struct pinctrl_dev *pctrldev,
 				 unsigned *num_pins)
 {
 	struct pxa3xx_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
-	if (selector >= info->num_grps)
-		return -EINVAL;
+
 	*pins = info->grps[selector].pins;
 	*num_pins = info->grps[selector].npins;
 	return 0;
 }

 static struct pinctrl_ops pxa3xx_pctrl_ops = {
-	.list_groups	= pxa3xx_list_groups,
+	.get_groups_count = pxa3xx_get_groups_count,
 	.get_group_name	= pxa3xx_get_group_name,
 	.get_group_pins	= pxa3xx_get_group_pins,
 };

-static int pxa3xx_pmx_list_func(struct pinctrl_dev *pctrldev, unsigned func)
+static int pxa3xx_pmx_get_funcs_count(struct pinctrl_dev *pctrldev)
 {
 	struct pxa3xx_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
-	if (func >= info->num_funcs)
-		return -EINVAL;
-	return 0;
+
+	return info->num_funcs;
 }

 static const char *pxa3xx_pmx_get_func_name(struct pinctrl_dev *pctrldev,
@ -170,7 +166,7 @@ static int pxa3xx_pmx_request_gpio(struct pinctrl_dev *pctrldev,
 }

 static struct pinmux_ops pxa3xx_pmx_ops = {
-	.list_functions		= pxa3xx_pmx_list_func,
+	.get_functions_count	= pxa3xx_pmx_get_funcs_count,
 	.get_function_name	= pxa3xx_pmx_get_func_name,
 	.get_function_groups	= pxa3xx_pmx_get_groups,
 	.enable			= pxa3xx_pmx_enable,
--- a/drivers/pinctrl/pinctrl-sirf.c
+++ b/drivers/pinctrl/pinctrl-sirf.c
@ -853,18 +853,14 @@ static const struct sirfsoc_pin_group sirfsoc_pin_groups[] = {
 	SIRFSOC_PIN_GROUP("gpsgrp", gps_pins),
 };

-static int sirfsoc_list_groups(struct pinctrl_dev *pctldev, unsigned selector)
+static int sirfsoc_get_groups_count(struct pinctrl_dev *pctldev)
 {
-	if (selector >= ARRAY_SIZE(sirfsoc_pin_groups))
-		return -EINVAL;
-	return 0;
+	return ARRAY_SIZE(sirfsoc_pin_groups);
 }

 static const char *sirfsoc_get_group_name(struct pinctrl_dev *pctldev,
 				       unsigned selector)
 {
-	if (selector >= ARRAY_SIZE(sirfsoc_pin_groups))
-		return NULL;
 	return sirfsoc_pin_groups[selector].name;
 }

@ -872,8 +868,6 @@ static int sirfsoc_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector
 			       const unsigned **pins,
 			       unsigned *num_pins)
 {
-	if (selector >= ARRAY_SIZE(sirfsoc_pin_groups))
-		return -EINVAL;
 	*pins = sirfsoc_pin_groups[selector].pins;
 	*num_pins = sirfsoc_pin_groups[selector].num_pins;
 	return 0;
@ -886,7 +880,7 @@ static void sirfsoc_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s
 }

 static struct pinctrl_ops sirfsoc_pctrl_ops = {
-	.list_groups = sirfsoc_list_groups,
+	.get_groups_count = sirfsoc_get_groups_count,
 	.get_group_name = sirfsoc_get_group_name,
 	.get_group_pins = sirfsoc_get_group_pins,
 	.pin_dbg_show = sirfsoc_pin_dbg_show,
@ -1033,11 +1027,9 @@ static void sirfsoc_pinmux_disable(struct pinctrl_dev *pmxdev, unsigned selector
 	sirfsoc_pinmux_endisable(spmx, selector, false);
 }

-static int sirfsoc_pinmux_list_funcs(struct pinctrl_dev *pmxdev, unsigned selector)
+static int sirfsoc_pinmux_get_funcs_count(struct pinctrl_dev *pmxdev)
 {
-	if (selector >= ARRAY_SIZE(sirfsoc_pmx_functions))
-		return -EINVAL;
-	return 0;
+	return ARRAY_SIZE(sirfsoc_pmx_functions);
 }

 static const char *sirfsoc_pinmux_get_func_name(struct pinctrl_dev *pctldev,
@ -1074,9 +1066,9 @@ static int sirfsoc_pinmux_request_gpio(struct pinctrl_dev *pmxdev,
 }

 static struct pinmux_ops sirfsoc_pinmux_ops = {
-	.list_functions = sirfsoc_pinmux_list_funcs,
 	.enable = sirfsoc_pinmux_enable,
 	.disable = sirfsoc_pinmux_disable,
+	.get_functions_count = sirfsoc_pinmux_get_funcs_count,
 	.get_function_name = sirfsoc_pinmux_get_func_name,
 	.get_function_groups = sirfsoc_pinmux_get_groups,
 	.gpio_request_enable = sirfsoc_pinmux_request_gpio,
--- a/drivers/pinctrl/pinctrl-tegra.c
+++ b/drivers/pinctrl/pinctrl-tegra.c
@ -23,9 +23,11 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
 #include <linux/pinctrl/pinconf.h>
+#include <linux/slab.h>

 #include <mach/pinconf-tegra.h>

@ -53,15 +55,11 @@ static inline void pmx_writel(struct tegra_pmx *pmx, u32 val, u32 bank, u32 reg)
 	writel(val, pmx->regs[bank] + reg);
 }

-static int tegra_pinctrl_list_groups(struct pinctrl_dev *pctldev,
-				     unsigned group)
+static int tegra_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
 {
 	struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);

-	if (group >= pmx->soc->ngroups)
-		return -EINVAL;
-
-	return 0;
+	return pmx->soc->ngroups;
 }

 static const char *tegra_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
@ -69,9 +67,6 @@ static const char *tegra_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
 {
 	struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);

-	if (group >= pmx->soc->ngroups)
-		return NULL;
-
 	return pmx->soc->groups[group].name;
 }

@ -82,9 +77,6 @@ static int tegra_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
 {
 	struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);

-	if (group >= pmx->soc->ngroups)
-		return -EINVAL;
-
 	*pins = pmx->soc->groups[group].pins;
 	*num_pins = pmx->soc->groups[group].npins;

@ -98,22 +90,221 @@ static void tegra_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
 	seq_printf(s, " " DRIVER_NAME);
 }

+static int reserve_map(struct pinctrl_map **map, unsigned *reserved_maps,
+		       unsigned *num_maps, unsigned reserve)
+{
+	unsigned old_num = *reserved_maps;
+	unsigned new_num = *num_maps + reserve;
+	struct pinctrl_map *new_map;
+
+	if (old_num >= new_num)
+		return 0;
+
+	new_map = krealloc(*map, sizeof(*new_map) * new_num, GFP_KERNEL);
+	if (!new_map)
+		return -ENOMEM;
+
+	memset(new_map + old_num, 0, (new_num - old_num) * sizeof(*new_map));
+
+	*map = new_map;
+	*reserved_maps = new_num;
+
+	return 0;
+}
+
+static int add_map_mux(struct pinctrl_map **map, unsigned *reserved_maps,
+		       unsigned *num_maps, const char *group,
+		       const char *function)
+{
+	if (*num_maps == *reserved_maps)
+		return -ENOSPC;
+
+	(*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP;
+	(*map)[*num_maps].data.mux.group = group;
+	(*map)[*num_maps].data.mux.function = function;
+	(*num_maps)++;
+
+	return 0;
+}
+
+static int add_map_configs(struct pinctrl_map **map, unsigned *reserved_maps,
+			   unsigned *num_maps, const char *group,
+			   unsigned long *configs, unsigned num_configs)
+{
+	unsigned long *dup_configs;
+
+	if (*num_maps == *reserved_maps)
+		return -ENOSPC;
+
+	dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs),
+			      GFP_KERNEL);
+	if (!dup_configs)
+		return -ENOMEM;
+
+	(*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_GROUP;
+	(*map)[*num_maps].data.configs.group_or_pin = group;
+	(*map)[*num_maps].data.configs.configs = dup_configs;
+	(*map)[*num_maps].data.configs.num_configs = num_configs;
+	(*num_maps)++;
+
+	return 0;
+}
+
+static int add_config(unsigned long **configs, unsigned *num_configs,
+		      unsigned long config)
+{
+	unsigned old_num = *num_configs;
+	unsigned new_num = old_num + 1;
+	unsigned long *new_configs;
+
+	new_configs = krealloc(*configs, sizeof(*new_configs) * new_num,
+			       GFP_KERNEL);
+	if (!new_configs)
+		return -ENOMEM;
+
+	new_configs[old_num] = config;
+
+	*configs = new_configs;
+	*num_configs = new_num;
+
+	return 0;
+}
+
+void tegra_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+			       struct pinctrl_map *map, unsigned num_maps)
+{
+	int i;
+
+	for (i = 0; i < num_maps; i++)
+		if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
+			kfree(map[i].data.configs.configs);
+
+	kfree(map);
+}
+
+static const struct cfg_param {
+	const char *property;
+	enum tegra_pinconf_param param;
+} cfg_params[] = {
+	{"nvidia,pull",			TEGRA_PINCONF_PARAM_PULL},
+	{"nvidia,tristate",		TEGRA_PINCONF_PARAM_TRISTATE},
+	{"nvidia,enable-input",		TEGRA_PINCONF_PARAM_ENABLE_INPUT},
+	{"nvidia,open-drain",		TEGRA_PINCONF_PARAM_OPEN_DRAIN},
+	{"nvidia,lock",			TEGRA_PINCONF_PARAM_LOCK},
+	{"nvidia,io-reset",		TEGRA_PINCONF_PARAM_IORESET},
+	{"nvidia,high-speed-mode",	TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE},
+	{"nvidia,schmitt",		TEGRA_PINCONF_PARAM_SCHMITT},
+	{"nvidia,low-power-mode",	TEGRA_PINCONF_PARAM_LOW_POWER_MODE},
+	{"nvidia,pull-down-strength",	TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH},
+	{"nvidia,pull-up-strength",	TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH},
+	{"nvidia,slew-rate-falling",	TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING},
+	{"nvidia,slew-rate-rising",	TEGRA_PINCONF_PARAM_SLEW_RATE_RISING},
+};
+
+int tegra_pinctrl_dt_subnode_to_map(struct device_node *np,
+				    struct pinctrl_map **map,
+				    unsigned *reserved_maps,
+				    unsigned *num_maps)
+{
+	int ret, i;
+	const char *function;
+	u32 val;
+	unsigned long config;
+	unsigned long *configs = NULL;
+	unsigned num_configs = 0;
+	unsigned reserve;
+	struct property *prop;
+	const char *group;
+
+	ret = of_property_read_string(np, "nvidia,function", &function);
+	if (ret < 0)
+		function = NULL;
+
+	for (i = 0; i < ARRAY_SIZE(cfg_params); i++) {
+		ret = of_property_read_u32(np, cfg_params[i].property, &val);
+		if (!ret) {
+			config = TEGRA_PINCONF_PACK(cfg_params[i].param, val);
+			ret = add_config(&configs, &num_configs, config);
+			if (ret < 0)
+				goto exit;
+		}
+	}
+
+	reserve = 0;
+	if (function != NULL)
+		reserve++;
+	if (num_configs)
+		reserve++;
+	ret = of_property_count_strings(np, "nvidia,pins");
+	if (ret < 0)
+		goto exit;
+	reserve *= ret;
+
+	ret = reserve_map(map, reserved_maps, num_maps, reserve);
+	if (ret < 0)
+		goto exit;
+
+	of_property_for_each_string(np, "nvidia,pins", prop, group) {
+		if (function) {
+			ret = add_map_mux(map, reserved_maps, num_maps,
+					  group, function);
+			if (ret < 0)
+				goto exit;
+		}
+
+		if (num_configs) {
+			ret = add_map_configs(map, reserved_maps, num_maps,
+					      group, configs, num_configs);
+			if (ret < 0)
+				goto exit;
+		}
+	}
+
+	ret = 0;
+
+exit:
+	kfree(configs);
+	return ret;
+}
+
+int tegra_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+				 struct device_node *np_config,
+				 struct pinctrl_map **map, unsigned *num_maps)
+{
+	unsigned reserved_maps;
+	struct device_node *np;
+	int ret;
+
+	reserved_maps = 0;
+	*map = NULL;
+	*num_maps = 0;
+
+	for_each_child_of_node(np_config, np) {
+		ret = tegra_pinctrl_dt_subnode_to_map(np, map, &reserved_maps,
+						      num_maps);
+		if (ret < 0) {
+			tegra_pinctrl_dt_free_map(pctldev, *map, *num_maps);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
 static struct pinctrl_ops tegra_pinctrl_ops = {
-	.list_groups = tegra_pinctrl_list_groups,
+	.get_groups_count = tegra_pinctrl_get_groups_count,
 	.get_group_name = tegra_pinctrl_get_group_name,
 	.get_group_pins = tegra_pinctrl_get_group_pins,
 	.pin_dbg_show = tegra_pinctrl_pin_dbg_show,
+	.dt_node_to_map = tegra_pinctrl_dt_node_to_map,
+	.dt_free_map = tegra_pinctrl_dt_free_map,
 };

-static int tegra_pinctrl_list_funcs(struct pinctrl_dev *pctldev,
-				    unsigned function)
+static int tegra_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev)
 {
 	struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);

-	if (function >= pmx->soc->nfunctions)
-		return -EINVAL;
-
-	return 0;
+	return pmx->soc->nfunctions;
 }

 static const char *tegra_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
@ -121,9 +312,6 @@ static const char *tegra_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
 {
 	struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);

-	if (function >= pmx->soc->nfunctions)
-		return NULL;
-
 	return pmx->soc->functions[function].name;
 }

@ -134,9 +322,6 @@ static int tegra_pinctrl_get_func_groups(struct pinctrl_dev *pctldev,
 {
 	struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);

-	if (function >= pmx->soc->nfunctions)
-		return -EINVAL;
-
 	*groups = pmx->soc->functions[function].groups;
 	*num_groups = pmx->soc->functions[function].ngroups;

@ -151,8 +336,6 @@ static int tegra_pinctrl_enable(struct pinctrl_dev *pctldev, unsigned function,
 	int i;
 	u32 val;

-	if (group >= pmx->soc->ngroups)
-		return -EINVAL;
 	g = &pmx->soc->groups[group];

 	if (g->mux_reg < 0)
@ -180,8 +363,6 @@ static void tegra_pinctrl_disable(struct pinctrl_dev *pctldev,
 	const struct tegra_pingroup *g;
 	u32 val;

-	if (group >= pmx->soc->ngroups)
-		return;
 	g = &pmx->soc->groups[group];

 	if (g->mux_reg < 0)
@ -194,7 +375,7 @@ static void tegra_pinctrl_disable(struct pinctrl_dev *pctldev,
 }

 static struct pinmux_ops tegra_pinmux_ops = {
-	.list_functions = tegra_pinctrl_list_funcs,
+	.get_functions_count = tegra_pinctrl_get_funcs_count,
 	.get_function_name = tegra_pinctrl_get_func_name,
 	.get_function_groups = tegra_pinctrl_get_func_groups,
 	.enable = tegra_pinctrl_enable,
@ -324,8 +505,6 @@ static int tegra_pinconf_group_get(struct pinctrl_dev *pctldev,
 	s16 reg;
 	u32 val, mask;

-	if (group >= pmx->soc->ngroups)
-		return -EINVAL;
 	g = &pmx->soc->groups[group];

 	ret = tegra_pinconf_reg(pmx, g, param, &bank, &reg, &bit, &width);
@ -353,8 +532,6 @@ static int tegra_pinconf_group_set(struct pinctrl_dev *pctldev,
 	s16 reg;
 	u32 val, mask;

-	if (group >= pmx->soc->ngroups)
-		return -EINVAL;
 	g = &pmx->soc->groups[group];

 	ret = tegra_pinconf_reg(pmx, g, param, &bank, &reg, &bit, &width);
--- a/drivers/pinctrl/pinctrl-u300.c
+++ b/drivers/pinctrl/pinctrl-u300.c
@ -836,18 +836,14 @@ static const struct u300_pin_group u300_pin_groups[] = {
 	},
 };

-static int u300_list_groups(struct pinctrl_dev *pctldev, unsigned selector)
+static int u300_get_groups_count(struct pinctrl_dev *pctldev)
 {
-	if (selector >= ARRAY_SIZE(u300_pin_groups))
-		return -EINVAL;
-	return 0;
+	return ARRAY_SIZE(u300_pin_groups);
 }

 static const char *u300_get_group_name(struct pinctrl_dev *pctldev,
 				       unsigned selector)
 {
-	if (selector >= ARRAY_SIZE(u300_pin_groups))
-		return NULL;
 	return u300_pin_groups[selector].name;
 }

@ -855,8 +851,6 @@ static int u300_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
 			       const unsigned **pins,
 			       unsigned *num_pins)
 {
-	if (selector >= ARRAY_SIZE(u300_pin_groups))
-		return -EINVAL;
 	*pins = u300_pin_groups[selector].pins;
 	*num_pins = u300_pin_groups[selector].num_pins;
 	return 0;
@ -869,7 +863,7 @@ static void u300_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
 }

 static struct pinctrl_ops u300_pctrl_ops = {
-	.list_groups = u300_list_groups,
+	.get_groups_count = u300_get_groups_count,
 	.get_group_name = u300_get_group_name,
 	.get_group_pins = u300_get_group_pins,
 	.pin_dbg_show = u300_pin_dbg_show,
@ -991,11 +985,9 @@ static void u300_pmx_disable(struct pinctrl_dev *pctldev, unsigned selector,
 	u300_pmx_endisable(upmx, selector, false);
 }

-static int u300_pmx_list_funcs(struct pinctrl_dev *pctldev, unsigned selector)
+static int u300_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
 {
-	if (selector >= ARRAY_SIZE(u300_pmx_functions))
-		return -EINVAL;
-	return 0;
+	return ARRAY_SIZE(u300_pmx_functions);
 }

 static const char *u300_pmx_get_func_name(struct pinctrl_dev *pctldev,
@ -1014,7 +1006,7 @@ static int u300_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
 }

 static struct pinmux_ops u300_pmx_ops = {
-	.list_functions = u300_pmx_list_funcs,
+	.get_functions_count = u300_pmx_get_funcs_count,
 	.get_function_name = u300_pmx_get_func_name,
 	.get_function_groups = u300_pmx_get_groups,
 	.enable = u300_pmx_enable,
--- a/drivers/pinctrl/pinmux.c
+++ b/drivers/pinctrl/pinmux.c
@ -33,10 +33,12 @@
 int pinmux_check_ops(struct pinctrl_dev *pctldev)
 {
 	const struct pinmux_ops *ops = pctldev->desc->pmxops;
+	unsigned nfuncs;
 	unsigned selector = 0;

 	/* Check that we implement required operations */
-	if (!ops->list_functions ||
+	if (!ops ||
+	    !ops->get_functions_count ||
 	    !ops->get_function_name ||
 	    !ops->get_function_groups ||
 	    !ops->enable ||
@ -44,11 +46,12 @@ int pinmux_check_ops(struct pinctrl_dev *pctldev)
 		return -EINVAL;

 	/* Check that all functions registered have names */
-	while (ops->list_functions(pctldev, selector) >= 0) {
+	nfuncs = ops->get_functions_count(pctldev);
+	while (selector < nfuncs) {
 		const char *fname = ops->get_function_name(pctldev,
 							   selector);
 		if (!fname) {
-			pr_err("pinmux ops has no name for function%u\n",
+			dev_err(pctldev->dev, "pinmux ops has no name for function%u\n",
 				selector);
 			return -EINVAL;
 		}
@ -85,8 +88,6 @@ static int pin_request(struct pinctrl_dev *pctldev,
 	const struct pinmux_ops *ops = pctldev->desc->pmxops;
 	int status = -EINVAL;

-	dev_dbg(pctldev->dev, "request pin %d for %s\n", pin, owner);
-
 	desc = pin_desc_get(pctldev, pin);
 	if (desc == NULL) {
 		dev_err(pctldev->dev,
@ -94,6 +95,9 @@ static int pin_request(struct pinctrl_dev *pctldev,
 		goto out;
 	}

+	dev_dbg(pctldev->dev, "request pin %d (%s) for %s\n",
+		pin, desc->name, owner);
+
 	if (gpio_range) {
 		/* There's no need to support multiple GPIO requests */
 		if (desc->gpio_owner) {
@ -287,10 +291,11 @@ static int pinmux_func_name_to_selector(struct pinctrl_dev *pctldev,
 					const char *function)
 {
 	const struct pinmux_ops *ops = pctldev->desc->pmxops;
+	unsigned nfuncs = ops->get_functions_count(pctldev);
 	unsigned selector = 0;

 	/* See if this pctldev has this function */
-	while (ops->list_functions(pctldev, selector) >= 0) {
+	while (selector < nfuncs) {
 		const char *fname = ops->get_function_name(pctldev,
 							   selector);

@ -319,6 +324,11 @@ int pinmux_map_to_setting(struct pinctrl_map const *map,
 	const unsigned *pins;
 	unsigned num_pins;

+	if (!pmxops) {
+		dev_err(pctldev->dev, "does not support mux function\n");
+		return -EINVAL;
+	}
+
 	setting->data.mux.func =
 		pinmux_func_name_to_selector(pctldev, map->data.mux.function);
 	if (setting->data.mux.func < 0)
@ -477,11 +487,15 @@ static int pinmux_functions_show(struct seq_file *s, void *what)
 {
 	struct pinctrl_dev *pctldev = s->private;
 	const struct pinmux_ops *pmxops = pctldev->desc->pmxops;
+	unsigned nfuncs;
 	unsigned func_selector = 0;

-	mutex_lock(&pinctrl_mutex);
+	if (!pmxops)
+		return 0;

-	while (pmxops->list_functions(pctldev, func_selector) >= 0) {
+	mutex_lock(&pinctrl_mutex);
+	nfuncs = pmxops->get_functions_count(pctldev);
+	while (func_selector < nfuncs) {
 		const char *func = pmxops->get_function_name(pctldev,
 							  func_selector);
 		const char * const *groups;
@ -515,6 +529,9 @@ static int pinmux_pins_show(struct seq_file *s, void *what)
 	const struct pinmux_ops *pmxops = pctldev->desc->pmxops;
 	unsigned i, pin;

+	if (!pmxops)
+		return 0;
+
 	seq_puts(s, "Pinmux settings per pin\n");
 	seq_puts(s, "Format: pin (name): mux_owner gpio_owner hog?\n");

--- a/drivers/pinctrl/pinmux.h
+++ b/drivers/pinctrl/pinmux.h
@ -31,12 +31,6 @@ void pinmux_free_setting(struct pinctrl_setting const *setting);
 int pinmux_enable_setting(struct pinctrl_setting const *setting);
 void pinmux_disable_setting(struct pinctrl_setting const *setting);

-void pinmux_show_map(struct seq_file *s, struct pinctrl_map const *map);
-void pinmux_show_setting(struct seq_file *s,
-			 struct pinctrl_setting const *setting);
-void pinmux_init_device_debugfs(struct dentry *devroot,
-				struct pinctrl_dev *pctldev);
-
 #else

 static inline int pinmux_check_ops(struct pinctrl_dev *pctldev)
@ -89,6 +83,18 @@ static inline void pinmux_disable_setting(
 {
 }

+#endif
+
+#if defined(CONFIG_PINMUX) && defined(CONFIG_DEBUG_FS)
+
+void pinmux_show_map(struct seq_file *s, struct pinctrl_map const *map);
+void pinmux_show_setting(struct seq_file *s,
+			 struct pinctrl_setting const *setting);
+void pinmux_init_device_debugfs(struct dentry *devroot,
+				struct pinctrl_dev *pctldev);
+
+#else
+
 static inline void pinmux_show_map(struct seq_file *s,
 				   struct pinctrl_map const *map)
 {
--- a/include/linux/of.h
+++ b/include/linux/of.h
@ -259,6 +259,37 @@ extern void of_detach_node(struct device_node *);
 #endif

 #define of_match_ptr(_ptr)	(_ptr)
+
+/*
+ * struct property *prop;
+ * const __be32 *p;
+ * u32 u;
+ *
+ * of_property_for_each_u32(np, "propname", prop, p, u)
+ *         printk("U32 value: %x\n", u);
+ */
+const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur,
+			       u32 *pu);
+#define of_property_for_each_u32(np, propname, prop, p, u)	\
+	for (prop = of_find_property(np, propname, NULL),	\
+		p = of_prop_next_u32(prop, NULL, &u);		\
+		p;						\
+		p = of_prop_next_u32(prop, p, &u))
+
+/*
+ * struct property *prop;
+ * const char *s;
+ *
+ * of_property_for_each_string(np, "propname", prop, s)
+ *         printk("String value: %s\n", s);
+ */
+const char *of_prop_next_string(struct property *prop, const char *cur);
+#define of_property_for_each_string(np, propname, prop, s)	\
+	for (prop = of_find_property(np, propname, NULL),	\
+		s = of_prop_next_string(prop, NULL);		\
+		s;						\
+		s = of_prop_next_string(prop, s))
+
 #else /* CONFIG_OF */

 static inline bool of_have_populated_dt(void)
@ -349,6 +380,10 @@ static inline int of_machine_is_compatible(const char *compat)

 #define of_match_ptr(_ptr)	NULL
 #define of_match_node(_matches, _node)	NULL
+#define of_property_for_each_u32(np, propname, prop, p, u) \
+	while (0)
+#define of_property_for_each_string(np, propname, prop, s) \
+	while (0)
 #endif /* CONFIG_OF */

 /**
--- a/include/linux/pinctrl/consumer.h
+++ b/include/linux/pinctrl/consumer.h
@ -36,6 +36,9 @@ extern struct pinctrl_state * __must_check pinctrl_lookup_state(
 							const char *name);
 extern int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *s);

+extern struct pinctrl * __must_check devm_pinctrl_get(struct device *dev);
+extern void devm_pinctrl_put(struct pinctrl *p);
+
 #else /* !CONFIG_PINCTRL */

 static inline int pinctrl_request_gpio(unsigned gpio)
@ -79,6 +82,15 @@ static inline int pinctrl_select_state(struct pinctrl *p,
 	return 0;
 }

+static inline struct pinctrl * __must_check devm_pinctrl_get(struct device *dev)
+{
+	return NULL;
+}
+
+static inline void devm_pinctrl_put(struct pinctrl *p)
+{
+}
+
 #endif /* CONFIG_PINCTRL */

 static inline struct pinctrl * __must_check pinctrl_get_select(
@ -113,6 +125,38 @@ static inline struct pinctrl * __must_check pinctrl_get_select_default(
 	return pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT);
 }

+static inline struct pinctrl * __must_check devm_pinctrl_get_select(
+					struct device *dev, const char *name)
+{
+	struct pinctrl *p;
+	struct pinctrl_state *s;
+	int ret;
+
+	p = devm_pinctrl_get(dev);
+	if (IS_ERR(p))
+		return p;
+
+	s = pinctrl_lookup_state(p, name);
+	if (IS_ERR(s)) {
+		devm_pinctrl_put(p);
+		return ERR_PTR(PTR_ERR(s));
+	}
+
+	ret = pinctrl_select_state(p, s);
+	if (ret < 0) {
+		devm_pinctrl_put(p);
+		return ERR_PTR(ret);
+	}
+
+	return p;
+}
+
+static inline struct pinctrl * __must_check devm_pinctrl_get_select_default(
+					struct device *dev)
+{
+	return devm_pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT);
+}
+
 #ifdef CONFIG_PINCONF

 extern int pin_config_get(const char *dev_name, const char *name,
--- a/include/linux/pinctrl/pinconf.h
+++ b/include/linux/pinctrl/pinconf.h
@ -33,6 +33,8 @@ struct seq_file;
 *	per-device info for a certain pin in debugfs
 * @pin_config_group_dbg_show: optional debugfs display hook that will provide
 *	per-device info for a certain group in debugfs
+ * @pin_config_config_dbg_show: optional debugfs display hook that will decode
+ *	and display a driver's pin configuration parameter
 */
 struct pinconf_ops {
 #ifdef CONFIG_GENERIC_PINCONF
@ -56,6 +58,9 @@ struct pinconf_ops {
 	void (*pin_config_group_dbg_show) (struct pinctrl_dev *pctldev,
 					   struct seq_file *s,
 					   unsigned selector);
+	void (*pin_config_config_dbg_show) (struct pinctrl_dev *pctldev,
+					    struct seq_file *s,
+					    unsigned long config);
 };

 #endif
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@ -21,9 +21,11 @@

 struct device;
 struct pinctrl_dev;
+struct pinctrl_map;
 struct pinmux_ops;
 struct pinconf_ops;
 struct gpio_chip;
+struct device_node;

 /**
 * struct pinctrl_pin_desc - boards/machines provide information on their
@ -64,9 +66,7 @@ struct pinctrl_gpio_range {
 /**
 * struct pinctrl_ops - global pin control operations, to be implemented by
 * pin controller drivers.
- * @list_groups: list the number of selectable named groups available
- *	in this pinmux driver, the core will begin on 0 and call this
- *	repeatedly as long as it returns >= 0 to enumerate the groups
+ * @get_groups_count: Returns the count of total number of groups registered.
 * @get_group_name: return the group name of the pin group
 * @get_group_pins: return an array of pins corresponding to a certain
 *	group selector @pins, and the size of the array in @num_pins
@ -74,7 +74,7 @@ struct pinctrl_gpio_range {
 *	info for a certain pin in debugfs
 */
 struct pinctrl_ops {
-	int (*list_groups) (struct pinctrl_dev *pctldev, unsigned selector);
+	int (*get_groups_count) (struct pinctrl_dev *pctldev);
 	const char *(*get_group_name) (struct pinctrl_dev *pctldev,
 				       unsigned selector);
 	int (*get_group_pins) (struct pinctrl_dev *pctldev,
@ -83,6 +83,11 @@ struct pinctrl_ops {
 			       unsigned *num_pins);
 	void (*pin_dbg_show) (struct pinctrl_dev *pctldev, struct seq_file *s,
 			  unsigned offset);
+	int (*dt_node_to_map) (struct pinctrl_dev *pctldev,
+			       struct device_node *np_config,
+			       struct pinctrl_map **map, unsigned *num_maps);
+	void (*dt_free_map) (struct pinctrl_dev *pctldev,
+			     struct pinctrl_map *map, unsigned num_maps);
 };

 /**
--- a/include/linux/pinctrl/pinmux.h
+++ b/include/linux/pinctrl/pinmux.h
@ -29,9 +29,8 @@ struct pinctrl_dev;
 *	is allowed to answer "no" by returning a negative error code
 * @free: the reverse function of the request() callback, frees a pin after
 *	being requested
- * @list_functions: list the number of selectable named functions available
- *	in this pinmux driver, the core will begin on 0 and call this
- *	repeatedly as long as it returns >= 0 to enumerate mux settings
+ * @get_functions_count: returns number of selectable named functions available
+ *	in this pinmux driver
 * @get_function_name: return the function name of the muxing selector,
 *	called by the core to figure out which mux setting it shall map a
 *	certain device to
@ -62,7 +61,7 @@ struct pinctrl_dev;
 struct pinmux_ops {
 	int (*request) (struct pinctrl_dev *pctldev, unsigned offset);
 	int (*free) (struct pinctrl_dev *pctldev, unsigned offset);
-	int (*list_functions) (struct pinctrl_dev *pctldev, unsigned selector);
+	int (*get_functions_count) (struct pinctrl_dev *pctldev);
 	const char *(*get_function_name) (struct pinctrl_dev *pctldev,
 					  unsigned selector);
 	int (*get_function_groups) (struct pinctrl_dev *pctldev,