ARM cpufreq updates for 6.13

- Add virtual cpufreq driver for guest kernels (David Dai).
 
 - Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva
   Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan
   Can).
 
 - Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
   (Colin Ian King).
 
 - Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad
   Dybcio, and Nikunj Kela).
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmc6wgAACgkQ0rkcPK6B
 Ehz2HA/9FvaDMmi4q1yt2CvkypN4XiaerUZBE+wBMgLDiGIOzx3X1YpiZwfH7LRR
 V+E7+63ZYH0bxfErG3M75x8YKvARB5WaiP+f+YYIFGnBiNdbG8WdooAy+gViE+AX
 Wiq4FNV2IqaQXceq1TCFMiwN8tn1gZO/axsWDiEUB+bTn11noJBkNa4I6TaGDH4X
 IwTVss5VBcP4fORmkTSnA/Epw6mtFIQfHPO3m5SbgBiB6NVK3+//ZAnHCYB23H34
 X5f0BcTw0IxkHbSuASg8ZMgqHfnmduV8g8dAhhIMkh2Zci145nmcSdcBZk1G32NC
 ffYznTTwEVRGMQ9ku6j9FXrqUw0Bb8GEOKSNMoO0Tc+e0UmAP/xKYICH3lbLEfXo
 3DWBDNu7wNjTpZ5OJwkFsRspCVZVBDi/bnBH+XN2ELzLIPiSMN2R+I480G5uNfMt
 iLy9Vzqpw7H6Z2OZiN9scUDZ/pgIC7T3ZjJLwy6XsBeWjM3/AwNPx1LYM5UNFl2P
 MEQs0EOXl1jxMEFG4jmr8iDT5dhgX0LM5zVq0kK/dQCtLtz9BqcVr3NV3bU4pLrx
 fldHqaxZXnCFqtXR3RHSodGdj1B3H+KhgeXki7qxtXAAzdydNFDZxA0Kxm7DHG0i
 onwB+b+J4TrEIwdAODZsjh4XYjKl/fLaIinHCkabQhOXUlQsgcg=
 =72Nq
 -----END PGP SIGNATURE-----

Merge tag 'cpufreq-arm-updates-6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Merge ARM cpufreq updates for 6.13 from Viresh Kumar:

"- Add virtual cpufreq driver for guest kernels (David Dai).

 - Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva
   Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan
   Can).

 - Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
   (Colin Ian King).

 - Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad
   Dybcio, and Nikunj Kela)."

* tag 'cpufreq-arm-updates-6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  arm64: dts: qcom: sc8180x: Add a SoC-specific compatible to cpufreq-hw
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SC8180X compatible
  cpufreq: sun50i: add a100 cpufreq support
  cpufreq: mediatek-hw: Fix wrong return value in mtk_cpufreq_get_cpu_power()
  cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_power()
  cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_cost()
  cpufreq: loongson3: Check for error code from devm_mutex_init() call
  cpufreq: scmi: Fix cleanup path when boost enablement fails
  cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost()
  cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw()
  Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SAR2130P compatible
  cpufreq: add virtual-cpufreq driver
  dt-bindings: cpufreq: add virtual cpufreq device
  cpufreq: loongson2: Unregister platform_driver on failure
  cpufreq: ti-cpufreq: Remove revision offsets in AM62 family
  cpufreq: ti-cpufreq: Allow backward compatibility for efuse syscon
  cppc_cpufreq: Remove HiSilicon CPPC workaround
  cppc_cpufreq: Use desired perf if feedback ctrs are 0 or unchanged
  dt-bindings: cpufreq: qcom-hw: document support for SA8255p

Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml

@@ -23,6 +23,7 @@ properties:
           - enum:
               - qcom,qcm2290-cpufreq-hw
               - qcom,sc7180-cpufreq-hw
+              - qcom,sc8180x-cpufreq-hw
               - qcom,sdm670-cpufreq-hw
               - qcom,sdm845-cpufreq-hw
               - qcom,sm6115-cpufreq-hw
@@ -34,7 +35,9 @@ properties:
         items:
           - enum:
               - qcom,qdu1000-cpufreq-epss
+              - qcom,sa8255p-cpufreq-epss
               - qcom,sa8775p-cpufreq-epss
+              - qcom,sar2130p-cpufreq-epss
               - qcom,sc7280-cpufreq-epss
               - qcom,sc8280xp-cpufreq-epss
               - qcom,sdx75-cpufreq-epss
@@ -107,6 +110,7 @@ allOf:
           contains:
             enum:
               - qcom,qcm2290-cpufreq-hw
+              - qcom,sar2130p-cpufreq-epss
     then:
       properties:
         reg:
@@ -130,7 +134,9 @@ allOf:
           contains:
             enum:
               - qcom,qdu1000-cpufreq-epss
+              - qcom,sa8255p-cpufreq-epss
               - qcom,sc7180-cpufreq-hw
+              - qcom,sc8180x-cpufreq-hw
               - qcom,sc8280xp-cpufreq-epss
               - qcom,sdm670-cpufreq-hw
               - qcom,sdm845-cpufreq-hw

Documentation/devicetree/bindings/cpufreq/qemu,virtual-cpufreq.yaml

@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/qemu,virtual-cpufreq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Virtual CPUFreq
+
+maintainers:
+  - David Dai <davidai@google.com>
+  - Saravana Kannan <saravanak@google.com>
+
+description:
+  Virtual CPUFreq is a virtualized driver in guest kernels that sends performance
+  selection of its vCPUs as a hint to the host through MMIO regions. Each vCPU
+  is associated with a performance domain which can be shared with other vCPUs.
+  Each performance domain has its own set of registers for performance controls.
+
+properties:
+  compatible:
+    const: qemu,virtual-cpufreq
+
+  reg:
+    maxItems: 1
+    description:
+      Address and size of region containing performance controls for each of the
+      performance domains. Regions for each performance domain is placed
+      contiguously and contain registers for controlling DVFS(Dynamic Frequency
+      and Voltage) characteristics. The size of the region is proportional to
+      total number of performance domains.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      cpufreq@1040000 {
+        compatible = "qemu,virtual-cpufreq";
+        reg = <0x1040000 0x2000>;
+      };
+    };

arch/arm64/boot/dts/qcom/sc8180x.dtsi

@@ -3889,7 +3889,7 @@
 		};
 
 		cpufreq_hw: cpufreq@18323000 {
-			compatible = "qcom,cpufreq-hw";
+			compatible = "qcom,sc8180x-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
 			reg-names = "freq-domain0", "freq-domain1";
 

drivers/cpufreq/Kconfig

@@ -217,6 +217,20 @@ config CPUFREQ_DT
 
 	  If in doubt, say N.
 
+config CPUFREQ_VIRT
+	tristate "Virtual cpufreq driver"
+	depends on GENERIC_ARCH_TOPOLOGY
+	help
+	  This adds a virtualized cpufreq driver for guest kernels that
+	  read/writes to a MMIO region for a virtualized cpufreq device to
+	  communicate with the host. It sends performance requests to the host
+	  which gets used as a hint to schedule vCPU threads and select CPU
+	  frequency. If a VM does not support a virtualized FIE such as AMUs,
+	  it updates the frequency scaling factor by polling host CPU frequency
+	  to enable accurate Per-Entity Load Tracking for tasks running in the guest.
+
+	  If in doubt, say N.
+
 config CPUFREQ_DT_PLATDEV
 	tristate "Generic DT based cpufreq platdev driver"
 	depends on OF

drivers/cpufreq/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_ATTR_SET)	+= cpufreq_governor_attr_set.o
 
 obj-$(CONFIG_CPUFREQ_DT)		+= cpufreq-dt.o
 obj-$(CONFIG_CPUFREQ_DT_PLATDEV)	+= cpufreq-dt-platdev.o
+obj-$(CONFIG_CPUFREQ_VIRT)		+= virtual-cpufreq.o
 
 # Traces
 CFLAGS_amd-pstate-trace.o               := -I$(src)

drivers/cpufreq/brcmstb-avs-cpufreq.c

@@ -474,8 +474,8 @@ static bool brcm_avs_is_firmware_loaded(struct private_data *priv)
 	rc = brcm_avs_get_pmap(priv, NULL);
 	magic = readl(priv->base + AVS_MBOX_MAGIC);
 
-	return (magic == AVS_FIRMWARE_MAGIC) && ((rc != -ENOTSUPP) ||
+	return (magic == AVS_FIRMWARE_MAGIC) && (rc != -ENOTSUPP) &&
-		(rc != -EINVAL));
+		(rc != -EINVAL);
 }
 
 static unsigned int brcm_avs_cpufreq_get(unsigned int cpu)

drivers/cpufreq/cppc_cpufreq.c

@@ -36,33 +36,15 @@ static LIST_HEAD(cpu_data_list);
 
 static bool boost_supported;
 
-struct cppc_workaround_oem_info {
-	char oem_id[ACPI_OEM_ID_SIZE + 1];
-	char oem_table_id[ACPI_OEM_TABLE_ID_SIZE + 1];
-	u32 oem_revision;
-};
-
-static struct cppc_workaround_oem_info wa_info[] = {
-	{
-		.oem_id		= "HISI  ",
-		.oem_table_id	= "HIP07   ",
-		.oem_revision	= 0,
-	}, {
-		.oem_id		= "HISI  ",
-		.oem_table_id	= "HIP08   ",
-		.oem_revision	= 0,
-	}
-};
-
 static struct cpufreq_driver cppc_cpufreq_driver;
 
+#ifdef CONFIG_ACPI_CPPC_CPUFREQ_FIE
 static enum {
 	FIE_UNSET = -1,
 	FIE_ENABLED,
 	FIE_DISABLED
 } fie_disabled = FIE_UNSET;
 
-#ifdef CONFIG_ACPI_CPPC_CPUFREQ_FIE
 module_param(fie_disabled, int, 0444);
 MODULE_PARM_DESC(fie_disabled, "Disable Frequency Invariance Engine (FIE)");
 
@@ -78,7 +60,6 @@ struct cppc_freq_invariance {
 static DEFINE_PER_CPU(struct cppc_freq_invariance, cppc_freq_inv);
 static struct kthread_worker *kworker_fie;
 
-static unsigned int hisi_cppc_cpufreq_get_rate(unsigned int cpu);
 static int cppc_perf_from_fbctrs(struct cppc_cpudata *cpu_data,
 				 struct cppc_perf_fb_ctrs *fb_ctrs_t0,
 				 struct cppc_perf_fb_ctrs *fb_ctrs_t1);
@@ -118,6 +99,9 @@ static void cppc_scale_freq_workfn(struct kthread_work *work)
 
 	perf = cppc_perf_from_fbctrs(cpu_data, &cppc_fi->prev_perf_fb_ctrs,
 				     &fb_ctrs);
+	if (!perf)
+		return;
+
 	cppc_fi->prev_perf_fb_ctrs = fb_ctrs;
 
 	perf <<= SCHED_CAPACITY_SHIFT;
@@ -420,6 +404,9 @@ static int cppc_get_cpu_power(struct device *cpu_dev,
 	struct cppc_cpudata *cpu_data;
 
 	policy = cpufreq_cpu_get_raw(cpu_dev->id);
+	if (!policy)
+		return -EINVAL;
+
 	cpu_data = policy->driver_data;
 	perf_caps = &cpu_data->perf_caps;
 	max_cap = arch_scale_cpu_capacity(cpu_dev->id);
@@ -487,6 +474,9 @@ static int cppc_get_cpu_cost(struct device *cpu_dev, unsigned long KHz,
 	int step;
 
 	policy = cpufreq_cpu_get_raw(cpu_dev->id);
+	if (!policy)
+		return -EINVAL;
+
 	cpu_data = policy->driver_data;
 	perf_caps = &cpu_data->perf_caps;
 	max_cap = arch_scale_cpu_capacity(cpu_dev->id);
@@ -724,13 +714,31 @@ static int cppc_perf_from_fbctrs(struct cppc_cpudata *cpu_data,
 	delta_delivered = get_delta(fb_ctrs_t1->delivered,
 				    fb_ctrs_t0->delivered);
 
-	/* Check to avoid divide-by zero and invalid delivered_perf */
+	/*
+	 * Avoid divide-by zero and unchanged feedback counters.
+	 * Leave it for callers to handle.
+	 */
 	if (!delta_reference || !delta_delivered)
-		return cpu_data->perf_ctrls.desired_perf;
+		return 0;
 
 	return (reference_perf * delta_delivered) / delta_reference;
 }
 
+static int cppc_get_perf_ctrs_sample(int cpu,
+				     struct cppc_perf_fb_ctrs *fb_ctrs_t0,
+				     struct cppc_perf_fb_ctrs *fb_ctrs_t1)
+{
+	int ret;
+
+	ret = cppc_get_perf_ctrs(cpu, fb_ctrs_t0);
+	if (ret)
+		return ret;
+
+	udelay(2); /* 2usec delay between sampling */
+
+	return cppc_get_perf_ctrs(cpu, fb_ctrs_t1);
+}
+
 static unsigned int cppc_cpufreq_get_rate(unsigned int cpu)
 {
 	struct cppc_perf_fb_ctrs fb_ctrs_t0 = {0}, fb_ctrs_t1 = {0};
@@ -746,18 +754,32 @@ static unsigned int cppc_cpufreq_get_rate(unsigned int cpu)
 
 	cpufreq_cpu_put(policy);
 
-	ret = cppc_get_perf_ctrs(cpu, &fb_ctrs_t0);
+	ret = cppc_get_perf_ctrs_sample(cpu, &fb_ctrs_t0, &fb_ctrs_t1);
-	if (ret)
+	if (ret) {
-		return 0;
+		if (ret == -EFAULT)
-
+			/* Any of the associated CPPC regs is 0. */
-	udelay(2); /* 2usec delay between sampling */
+			goto out_invalid_counters;
-
+		else
-	ret = cppc_get_perf_ctrs(cpu, &fb_ctrs_t1);
+			return 0;
-	if (ret)
+	}
-		return 0;
 
 	delivered_perf = cppc_perf_from_fbctrs(cpu_data, &fb_ctrs_t0,
 					       &fb_ctrs_t1);
+	if (!delivered_perf)
+		goto out_invalid_counters;
+
+	return cppc_perf_to_khz(&cpu_data->perf_caps, delivered_perf);
+
+out_invalid_counters:
+	/*
+	 * Feedback counters could be unchanged or 0 when a cpu enters a
+	 * low-power idle state, e.g. clock-gated or power-gated.
+	 * Use desired perf for reflecting frequency.  Get the latest register
+	 * value first as some platforms may update the actual delivered perf
+	 * there; if failed, resort to the cached desired perf.
+	 */
+	if (cppc_get_desired_perf(cpu, &delivered_perf))
+		delivered_perf = cpu_data->perf_ctrls.desired_perf;
 
 	return cppc_perf_to_khz(&cpu_data->perf_caps, delivered_perf);
 }
@@ -812,57 +834,6 @@ static struct cpufreq_driver cppc_cpufreq_driver = {
 	.name = "cppc_cpufreq",
 };
 
-/*
- * HISI platform does not support delivered performance counter and
- * reference performance counter. It can calculate the performance using the
- * platform specific mechanism. We reuse the desired performance register to
- * store the real performance calculated by the platform.
- */
-static unsigned int hisi_cppc_cpufreq_get_rate(unsigned int cpu)
-{
-	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
-	struct cppc_cpudata *cpu_data;
-	u64 desired_perf;
-	int ret;
-
-	if (!policy)
-		return -ENODEV;
-
-	cpu_data = policy->driver_data;
-
-	cpufreq_cpu_put(policy);
-
-	ret = cppc_get_desired_perf(cpu, &desired_perf);
-	if (ret < 0)
-		return -EIO;
-
-	return cppc_perf_to_khz(&cpu_data->perf_caps, desired_perf);
-}
-
-static void cppc_check_hisi_workaround(void)
-{
-	struct acpi_table_header *tbl;
-	acpi_status status = AE_OK;
-	int i;
-
-	status = acpi_get_table(ACPI_SIG_PCCT, 0, &tbl);
-	if (ACPI_FAILURE(status) || !tbl)
-		return;
-
-	for (i = 0; i < ARRAY_SIZE(wa_info); i++) {
-		if (!memcmp(wa_info[i].oem_id, tbl->oem_id, ACPI_OEM_ID_SIZE) &&
-		    !memcmp(wa_info[i].oem_table_id, tbl->oem_table_id, ACPI_OEM_TABLE_ID_SIZE) &&
-		    wa_info[i].oem_revision == tbl->oem_revision) {
-			/* Overwrite the get() callback */
-			cppc_cpufreq_driver.get = hisi_cppc_cpufreq_get_rate;
-			fie_disabled = FIE_DISABLED;
-			break;
-		}
-	}
-
-	acpi_put_table(tbl);
-}
-
 static int __init cppc_cpufreq_init(void)
 {
 	int ret;
@@ -870,7 +841,6 @@ static int __init cppc_cpufreq_init(void)
 	if (!acpi_cpc_valid())
 		return -ENODEV;
 
-	cppc_check_hisi_workaround();
 	cppc_freq_invariance_init();
 	populate_efficiency_class();
 

drivers/cpufreq/cpufreq-dt-platdev.c

@@ -103,6 +103,7 @@ static const struct of_device_id allowlist[] __initconst = {
  * platforms using "operating-points-v2" property.
  */
 static const struct of_device_id blocklist[] __initconst = {
+	{ .compatible = "allwinner,sun50i-a100" },
 	{ .compatible = "allwinner,sun50i-h6", },
 	{ .compatible = "allwinner,sun50i-h616", },
 	{ .compatible = "allwinner,sun50i-h618", },

drivers/cpufreq/loongson2_cpufreq.c

@@ -148,7 +148,9 @@ static int __init cpufreq_init(void)
 
 	ret = cpufreq_register_driver(&loongson2_cpufreq_driver);
 
-	if (!ret && !nowait) {
+	if (ret) {
+		platform_driver_unregister(&platform_driver);
+	} else if (!nowait) {
 		saved_cpu_wait = cpu_wait;
 		cpu_wait = loongson2_cpu_wait;
 	}

drivers/cpufreq/loongson3_cpufreq.c

@@ -346,8 +346,11 @@ static int loongson3_cpufreq_probe(struct platform_device *pdev)
 {
 	int i, ret;
 
-	for (i = 0; i < MAX_PACKAGES; i++)
+	for (i = 0; i < MAX_PACKAGES; i++) {
-		devm_mutex_init(&pdev->dev, &cpufreq_mutex[i]);
+		ret = devm_mutex_init(&pdev->dev, &cpufreq_mutex[i]);
+		if (ret)
+			return ret;
+	}
 
 	ret = do_service_request(0, 0, CMD_GET_VERSION, 0, 0);
 	if (ret <= 0)

drivers/cpufreq/mediatek-cpufreq-hw.c

@@ -62,7 +62,7 @@ mtk_cpufreq_get_cpu_power(struct device *cpu_dev, unsigned long *uW,
 
 	policy = cpufreq_cpu_get_raw(cpu_dev->id);
 	if (!policy)
-		return 0;
+		return -EINVAL;
 
 	data = policy->driver_data;
 

drivers/cpufreq/scmi-cpufreq.c

@@ -287,7 +287,7 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 		ret = cpufreq_enable_boost_support();
 		if (ret) {
 			dev_warn(cpu_dev, "failed to enable boost: %d\n", ret);
-			goto out_free_opp;
+			goto out_free_table;
 		} else {
 			scmi_cpufreq_hw_attr[1] = &cpufreq_freq_attr_scaling_boost_freqs;
 			scmi_cpufreq_driver.boost_enabled = true;
@@ -296,6 +296,8 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 
 	return 0;
 
+out_free_table:
+	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
 out_free_opp:
 	dev_pm_opp_remove_all_dynamic(cpu_dev);
 

drivers/cpufreq/sun50i-cpufreq-nvmem.c

@@ -22,6 +22,9 @@
 #define NVMEM_MASK	0x7
 #define NVMEM_SHIFT	5
 
+#define SUN50I_A100_NVMEM_MASK	0xf
+#define SUN50I_A100_NVMEM_SHIFT	12
+
 static struct platform_device *cpufreq_dt_pdev, *sun50i_cpufreq_pdev;
 
 struct sunxi_cpufreq_data {
@@ -45,6 +48,23 @@ static u32 sun50i_h6_efuse_xlate(u32 speedbin)
 		return 0;
 }
 
+static u32 sun50i_a100_efuse_xlate(u32 speedbin)
+{
+	u32 efuse_value;
+
+	efuse_value = (speedbin >> SUN50I_A100_NVMEM_SHIFT) &
+		      SUN50I_A100_NVMEM_MASK;
+
+	switch (efuse_value) {
+	case 0b100:
+		return 2;
+	case 0b010:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
 static int get_soc_id_revision(void)
 {
 #ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
@@ -108,6 +128,10 @@ static struct sunxi_cpufreq_data sun50i_h6_cpufreq_data = {
 	.efuse_xlate = sun50i_h6_efuse_xlate,
 };
 
+static struct sunxi_cpufreq_data sun50i_a100_cpufreq_data = {
+	.efuse_xlate = sun50i_a100_efuse_xlate,
+};
+
 static struct sunxi_cpufreq_data sun50i_h616_cpufreq_data = {
 	.efuse_xlate = sun50i_h616_efuse_xlate,
 };
@@ -116,6 +140,9 @@ static const struct of_device_id cpu_opp_match_list[] = {
 	{ .compatible = "allwinner,sun50i-h6-operating-points",
 	  .data = &sun50i_h6_cpufreq_data,
 	},
+	{ .compatible = "allwinner,sun50i-a100-operating-points",
+	  .data = &sun50i_a100_cpufreq_data,
+	},
 	{ .compatible = "allwinner,sun50i-h616-operating-points",
 	  .data = &sun50i_h616_cpufreq_data,
 	},
@@ -291,6 +318,7 @@ static struct platform_driver sun50i_cpufreq_driver = {
 
 static const struct of_device_id sun50i_cpufreq_match_list[] = {
 	{ .compatible = "allwinner,sun50i-h6" },
+	{ .compatible = "allwinner,sun50i-a100" },
 	{ .compatible = "allwinner,sun50i-h616" },
 	{ .compatible = "allwinner,sun50i-h618" },
 	{ .compatible = "allwinner,sun50i-h700" },

drivers/cpufreq/ti-cpufreq.c

@@ -93,6 +93,8 @@ struct ti_cpufreq_soc_data {
 	bool multi_regulator;
 /* Backward compatibility hack: Might have missing syscon */
 #define TI_QUIRK_SYSCON_MAY_BE_MISSING	0x1
+/* Backward compatibility hack: new syscon size is 1 register wide */
+#define TI_QUIRK_SYSCON_IS_SINGLE_REG	0x2
 	u8 quirks;
 };
 
@@ -316,8 +318,8 @@ static struct ti_cpufreq_soc_data am625_soc_data = {
 	.efuse_offset = 0x0018,
 	.efuse_mask = 0x07c0,
 	.efuse_shift = 0x6,
-	.rev_offset = 0x0014,
 	.multi_regulator = false,
+	.quirks = TI_QUIRK_SYSCON_IS_SINGLE_REG,
 };
 
 static struct ti_cpufreq_soc_data am62a7_soc_data = {
@@ -325,7 +327,6 @@ static struct ti_cpufreq_soc_data am62a7_soc_data = {
 	.efuse_offset = 0x0,
 	.efuse_mask = 0x07c0,
 	.efuse_shift = 0x6,
-	.rev_offset = 0x0014,
 	.multi_regulator = false,
 };
 
@@ -334,7 +335,6 @@ static struct ti_cpufreq_soc_data am62p5_soc_data = {
 	.efuse_offset = 0x0,
 	.efuse_mask = 0x07c0,
 	.efuse_shift = 0x6,
-	.rev_offset = 0x0014,
 	.multi_regulator = false,
 };
 
@@ -354,6 +354,10 @@ static int ti_cpufreq_get_efuse(struct ti_cpufreq_data *opp_data,
 
 	ret = regmap_read(opp_data->syscon, opp_data->soc_data->efuse_offset,
 			  &efuse);
+
+	if (opp_data->soc_data->quirks & TI_QUIRK_SYSCON_IS_SINGLE_REG && ret == -EIO)
+		ret = regmap_read(opp_data->syscon, 0x0, &efuse);
+
 	if (opp_data->soc_data->quirks & TI_QUIRK_SYSCON_MAY_BE_MISSING && ret == -EIO) {
 		/* not a syscon register! */
 		void __iomem *regs = ioremap(OMAP3_SYSCON_BASE +

drivers/cpufreq/virtual-cpufreq.c

@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2024 Google LLC
+ */
+
+#include <linux/arch_topology.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/*
+ * CPU0..CPUn
+ * +-------------+-------------------------------+--------+-------+
+ * | Register    | Description                   | Offset |   Len |
+ * +-------------+-------------------------------+--------+-------+
+ * | cur_perf    | read this register to get     |    0x0 |   0x4 |
+ * |             | the current perf (integer val |        |       |
+ * |             | representing perf relative to |        |       |
+ * |             | max performance)              |        |       |
+ * |             | that vCPU is running at       |        |       |
+ * +-------------+-------------------------------+--------+-------+
+ * | set_perf    | write to this register to set |    0x4 |   0x4 |
+ * |             | perf value of the vCPU        |        |       |
+ * +-------------+-------------------------------+--------+-------+
+ * | perftbl_len | number of entries in perf     |    0x8 |   0x4 |
+ * |             | table. A single entry in the  |        |       |
+ * |             | perf table denotes no table   |        |       |
+ * |             | and the entry contains        |        |       |
+ * |             | the maximum perf value        |        |       |
+ * |             | that this vCPU supports.      |        |       |
+ * |             | The guest can request any     |        |       |
+ * |             | value between 1 and max perf  |        |       |
+ * |             | when perftbls are not used.   |        |       |
+ * +---------------------------------------------+--------+-------+
+ * | perftbl_sel | write to this register to     |    0xc |   0x4 |
+ * |             | select perf table entry to    |        |       |
+ * |             | read from                     |        |       |
+ * +---------------------------------------------+--------+-------+
+ * | perftbl_rd  | read this register to get     |   0x10 |   0x4 |
+ * |             | perf value of the selected    |        |       |
+ * |             | entry based on perftbl_sel    |        |       |
+ * +---------------------------------------------+--------+-------+
+ * | perf_domain | performance domain number     |   0x14 |   0x4 |
+ * |             | that this vCPU belongs to.    |        |       |
+ * |             | vCPUs sharing the same perf   |        |       |
+ * |             | domain number are part of the |        |       |
+ * |             | same performance domain.      |        |       |
+ * +-------------+-------------------------------+--------+-------+
+ */
+
+#define REG_CUR_PERF_STATE_OFFSET 0x0
+#define REG_SET_PERF_STATE_OFFSET 0x4
+#define REG_PERFTBL_LEN_OFFSET 0x8
+#define REG_PERFTBL_SEL_OFFSET 0xc
+#define REG_PERFTBL_RD_OFFSET 0x10
+#define REG_PERF_DOMAIN_OFFSET 0x14
+#define PER_CPU_OFFSET 0x1000
+
+#define PERFTBL_MAX_ENTRIES 64U
+
+static void __iomem *base;
+static DEFINE_PER_CPU(u32, perftbl_num_entries);
+
+static void virt_scale_freq_tick(void)
+{
+	int cpu = smp_processor_id();
+	u32 max_freq = (u32)cpufreq_get_hw_max_freq(cpu);
+	u64 cur_freq;
+	unsigned long scale;
+
+	cur_freq = (u64)readl_relaxed(base + cpu * PER_CPU_OFFSET
+			+ REG_CUR_PERF_STATE_OFFSET);
+
+	cur_freq <<= SCHED_CAPACITY_SHIFT;
+	scale = (unsigned long)div_u64(cur_freq, max_freq);
+	scale = min(scale, SCHED_CAPACITY_SCALE);
+
+	this_cpu_write(arch_freq_scale, scale);
+}
+
+static struct scale_freq_data virt_sfd = {
+	.source = SCALE_FREQ_SOURCE_VIRT,
+	.set_freq_scale = virt_scale_freq_tick,
+};
+
+static unsigned int virt_cpufreq_set_perf(struct cpufreq_policy *policy,
+					  unsigned int target_freq)
+{
+	writel_relaxed(target_freq,
+		       base + policy->cpu * PER_CPU_OFFSET + REG_SET_PERF_STATE_OFFSET);
+	return 0;
+}
+
+static unsigned int virt_cpufreq_fast_switch(struct cpufreq_policy *policy,
+					     unsigned int target_freq)
+{
+	virt_cpufreq_set_perf(policy, target_freq);
+	return target_freq;
+}
+
+static u32 virt_cpufreq_get_perftbl_entry(int cpu, u32 idx)
+{
+	writel_relaxed(idx, base + cpu * PER_CPU_OFFSET +
+		       REG_PERFTBL_SEL_OFFSET);
+	return readl_relaxed(base + cpu * PER_CPU_OFFSET +
+			     REG_PERFTBL_RD_OFFSET);
+}
+
+static int virt_cpufreq_target(struct cpufreq_policy *policy,
+			       unsigned int target_freq,
+			       unsigned int relation)
+{
+	struct cpufreq_freqs freqs;
+	int ret = 0;
+
+	freqs.old = policy->cur;
+	freqs.new = target_freq;
+
+	cpufreq_freq_transition_begin(policy, &freqs);
+	ret = virt_cpufreq_set_perf(policy, target_freq);
+	cpufreq_freq_transition_end(policy, &freqs, ret != 0);
+
+	return ret;
+}
+
+static int virt_cpufreq_get_sharing_cpus(struct cpufreq_policy *policy)
+{
+	u32 cur_perf_domain, perf_domain;
+	struct device *cpu_dev;
+	int cpu;
+
+	cur_perf_domain = readl_relaxed(base + policy->cpu *
+					PER_CPU_OFFSET + REG_PERF_DOMAIN_OFFSET);
+
+	for_each_possible_cpu(cpu) {
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev)
+			continue;
+
+		perf_domain = readl_relaxed(base + cpu *
+					    PER_CPU_OFFSET + REG_PERF_DOMAIN_OFFSET);
+
+		if (perf_domain == cur_perf_domain)
+			cpumask_set_cpu(cpu, policy->cpus);
+	}
+
+	return 0;
+}
+
+static int virt_cpufreq_get_freq_info(struct cpufreq_policy *policy)
+{
+	struct cpufreq_frequency_table *table;
+	u32 num_perftbl_entries, idx;
+
+	num_perftbl_entries = per_cpu(perftbl_num_entries, policy->cpu);
+
+	if (num_perftbl_entries == 1) {
+		policy->cpuinfo.min_freq = 1;
+		policy->cpuinfo.max_freq = virt_cpufreq_get_perftbl_entry(policy->cpu, 0);
+
+		policy->min = policy->cpuinfo.min_freq;
+		policy->max = policy->cpuinfo.max_freq;
+
+		policy->cur = policy->max;
+		return 0;
+	}
+
+	table = kcalloc(num_perftbl_entries + 1, sizeof(*table), GFP_KERNEL);
+	if (!table)
+		return -ENOMEM;
+
+	for (idx = 0; idx < num_perftbl_entries; idx++)
+		table[idx].frequency = virt_cpufreq_get_perftbl_entry(policy->cpu, idx);
+
+	table[idx].frequency = CPUFREQ_TABLE_END;
+	policy->freq_table = table;
+
+	return 0;
+}
+
+static int virt_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	struct device *cpu_dev;
+	int ret;
+
+	cpu_dev = get_cpu_device(policy->cpu);
+	if (!cpu_dev)
+		return -ENODEV;
+
+	ret = virt_cpufreq_get_freq_info(policy);
+	if (ret) {
+		dev_warn(cpu_dev, "failed to get cpufreq info\n");
+		return ret;
+	}
+
+	ret = virt_cpufreq_get_sharing_cpus(policy);
+	if (ret) {
+		dev_warn(cpu_dev, "failed to get sharing cpumask\n");
+		return ret;
+	}
+
+	/*
+	 * To simplify and improve latency of handling frequency requests on
+	 * the host side, this ensures that the vCPU thread triggering the MMIO
+	 * abort is the same thread whose performance constraints (Ex. uclamp
+	 * settings) need to be updated. This simplifies the VMM (Virtual
+	 * Machine Manager) having to find the correct vCPU thread and/or
+	 * facing permission issues when configuring other threads.
+	 */
+	policy->dvfs_possible_from_any_cpu = false;
+	policy->fast_switch_possible = true;
+
+	/*
+	 * Using the default SCALE_FREQ_SOURCE_CPUFREQ is insufficient since
+	 * the actual physical CPU frequency may not match requested frequency
+	 * from the vCPU thread due to frequency update latencies or other
+	 * inputs to the physical CPU frequency selection. This additional FIE
+	 * source allows for more accurate freq_scale updates and only takes
+	 * effect if another FIE source such as AMUs have not been registered.
+	 */
+	topology_set_scale_freq_source(&virt_sfd, policy->cpus);
+
+	return 0;
+}
+
+static void virt_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	topology_clear_scale_freq_source(SCALE_FREQ_SOURCE_VIRT, policy->related_cpus);
+	kfree(policy->freq_table);
+}
+
+static int virt_cpufreq_online(struct cpufreq_policy *policy)
+{
+	/* Nothing to restore. */
+	return 0;
+}
+
+static int virt_cpufreq_offline(struct cpufreq_policy *policy)
+{
+	/* Dummy offline() to avoid exit() being called and freeing resources. */
+	return 0;
+}
+
+static int virt_cpufreq_verify_policy(struct cpufreq_policy_data *policy)
+{
+	if (policy->freq_table)
+		return cpufreq_frequency_table_verify(policy, policy->freq_table);
+
+	cpufreq_verify_within_cpu_limits(policy);
+	return 0;
+}
+
+static struct cpufreq_driver cpufreq_virt_driver = {
+	.name		= "virt-cpufreq",
+	.init		= virt_cpufreq_cpu_init,
+	.exit		= virt_cpufreq_cpu_exit,
+	.online         = virt_cpufreq_online,
+	.offline        = virt_cpufreq_offline,
+	.verify		= virt_cpufreq_verify_policy,
+	.target		= virt_cpufreq_target,
+	.fast_switch	= virt_cpufreq_fast_switch,
+	.attr		= cpufreq_generic_attr,
+};
+
+static int virt_cpufreq_driver_probe(struct platform_device *pdev)
+{
+	u32 num_perftbl_entries;
+	int ret, cpu;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	for_each_possible_cpu(cpu) {
+		num_perftbl_entries = readl_relaxed(base + cpu * PER_CPU_OFFSET +
+						    REG_PERFTBL_LEN_OFFSET);
+
+		if (!num_perftbl_entries || num_perftbl_entries > PERFTBL_MAX_ENTRIES)
+			return -ENODEV;
+
+		per_cpu(perftbl_num_entries, cpu) = num_perftbl_entries;
+	}
+
+	ret = cpufreq_register_driver(&cpufreq_virt_driver);
+	if (ret) {
+		dev_err(&pdev->dev, "Virtual CPUFreq driver failed to register: %d\n", ret);
+		return ret;
+	}
+
+	dev_dbg(&pdev->dev, "Virtual CPUFreq driver initialized\n");
+	return 0;
+}
+
+static void virt_cpufreq_driver_remove(struct platform_device *pdev)
+{
+	cpufreq_unregister_driver(&cpufreq_virt_driver);
+}
+
+static const struct of_device_id virt_cpufreq_match[] = {
+	{ .compatible = "qemu,virtual-cpufreq", .data = NULL},
+	{}
+};
+MODULE_DEVICE_TABLE(of, virt_cpufreq_match);
+
+static struct platform_driver virt_cpufreq_driver = {
+	.probe = virt_cpufreq_driver_probe,
+	.remove = virt_cpufreq_driver_remove,
+	.driver = {
+		.name = "virt-cpufreq",
+		.of_match_table = virt_cpufreq_match,
+	},
+};
+
+static int __init virt_cpufreq_init(void)
+{
+	return platform_driver_register(&virt_cpufreq_driver);
+}
+postcore_initcall(virt_cpufreq_init);
+
+static void __exit virt_cpufreq_exit(void)
+{
+	platform_driver_unregister(&virt_cpufreq_driver);
+}
+module_exit(virt_cpufreq_exit);
+
+MODULE_DESCRIPTION("Virtual cpufreq driver");
+MODULE_LICENSE("GPL");

include/linux/arch_topology.h

@@ -45,6 +45,7 @@ enum scale_freq_source {
 	SCALE_FREQ_SOURCE_CPUFREQ = 0,
 	SCALE_FREQ_SOURCE_ARCH,
 	SCALE_FREQ_SOURCE_CPPC,
+	SCALE_FREQ_SOURCE_VIRT,
 };
 
 struct scale_freq_data {