diff --git a/.mailmap b/.mailmap index 2909c33bc54e..658003aa9446 100644 --- a/.mailmap +++ b/.mailmap @@ -111,6 +111,7 @@ Uwe Kleine-König Uwe Kleine-König Uwe Kleine-König Valdis Kletnieks +Viresh Kumar Takashi YOSHII Yusuke Goda Gustavo Padovan diff --git a/Documentation/ABI/testing/sysfs-block-rssd b/Documentation/ABI/testing/sysfs-block-rssd index 679ce3543122..beef30c046b0 100644 --- a/Documentation/ABI/testing/sysfs-block-rssd +++ b/Documentation/ABI/testing/sysfs-block-rssd @@ -1,26 +1,5 @@ -What: /sys/block/rssd*/registers -Date: March 2012 -KernelVersion: 3.3 -Contact: Asai Thambi S P -Description: This is a read-only file. Dumps below driver information and - hardware registers. - - S ACTive - - Command Issue - - Completed - - PORT IRQ STAT - - HOST IRQ STAT - - Allocated - - Commands in Q - What: /sys/block/rssd*/status Date: April 2012 KernelVersion: 3.4 Contact: Asai Thambi S P Description: This is a read-only file. Indicates the status of the device. - -What: /sys/block/rssd*/flags -Date: May 2012 -KernelVersion: 3.5 -Contact: Asai Thambi S P -Description: This is a read-only file. Dumps the flags in port and driver - data structure diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 5bc8a476c15e..cfedf63cce15 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -219,6 +219,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale @@ -273,6 +274,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available What: /sys/.../iio:deviceX/in_voltageX_scale_available What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available What: /sys/.../iio:deviceX/out_voltageX_scale_available +What: /sys/.../iio:deviceX/out_altvoltageX_scale_available What: /sys/.../iio:deviceX/in_capacitance_scale_available KernelVersion: 2.635 Contact: linux-iio@vger.kernel.org @@ -298,14 +300,19 @@ Description: gives the 3dB frequency of the filter in Hz. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled, no bias etc.) output voltage for channel Y. The number must always be specified and unique if the output corresponds to a single channel. + While DAC like devices typically use out_voltage, + a continuous frequency generating device, such as + a DDS or PLL should use out_altvoltage. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: @@ -316,6 +323,8 @@ Description: What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: @@ -330,6 +339,8 @@ Description: What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available +What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available +What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: @@ -338,6 +349,8 @@ Description: What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: @@ -346,6 +359,24 @@ Description: normal operation. Y may be suppressed if all outputs are controlled together. +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Output frequency for channel Y in Hz. The number must always be + specified and unique if the output corresponds to a single + channel. + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Phase in radians of one frequency/clock output Y + (out_altvoltageY) relative to another frequency/clock output + (out_altvoltageZ) of the device X. The number must always be + specified and unique if the output corresponds to a single + channel. + What: /sys/bus/iio/devices/iio:deviceX/events KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd index db1ad7e34fc3..938ef71e2035 100644 --- a/Documentation/ABI/testing/sysfs-class-mtd +++ b/Documentation/ABI/testing/sysfs-class-mtd @@ -142,13 +142,14 @@ KernelVersion: 3.4 Contact: linux-mtd@lists.infradead.org Description: This allows the user to examine and adjust the criteria by which - mtd returns -EUCLEAN from mtd_read(). If the maximum number of - bit errors that were corrected on any single region comprising - an ecc step (as reported by the driver) equals or exceeds this - value, -EUCLEAN is returned. Otherwise, absent an error, 0 is - returned. Higher layers (e.g., UBI) use this return code as an - indication that an erase block may be degrading and should be - scrutinized as a candidate for being marked as bad. + mtd returns -EUCLEAN from mtd_read() and mtd_read_oob(). If the + maximum number of bit errors that were corrected on any single + region comprising an ecc step (as reported by the driver) equals + or exceeds this value, -EUCLEAN is returned. Otherwise, absent + an error, 0 is returned. Higher layers (e.g., UBI) use this + return code as an indication that an erase block may be + degrading and should be scrutinized as a candidate for being + marked as bad. The initial value may be specified by the flash device driver. If not, then the default value is ecc_strength. @@ -167,7 +168,7 @@ Description: block degradation, but high enough to avoid the consequences of a persistent return value of -EUCLEAN on devices where sticky bitflips occur. Note that if bitflip_threshold exceeds - ecc_strength, -EUCLEAN is never returned by mtd_read(). + ecc_strength, -EUCLEAN is never returned by the read operations. Conversely, if bitflip_threshold is zero, -EUCLEAN is always returned, absent a hard error. diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 676bc46f9c52..cda0dfb6769a 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -3988,7 +3988,7 @@ interface and may change in the future. from RGB to Y'CbCr color space. - + diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml index f5ac15ed0549..e58934c92895 100644 --- a/Documentation/DocBook/media/v4l/pixfmt.xml +++ b/Documentation/DocBook/media/v4l/pixfmt.xml @@ -986,13 +986,13 @@ http://www.thedirks.org/winnov/ V4L2_PIX_FMT_Y4 'Y04 ' - Old 4-bit greyscale format. Only the least significant 4 bits of each byte are used, + Old 4-bit greyscale format. Only the most significant 4 bits of each byte are used, the other bits are set to 0. V4L2_PIX_FMT_Y6 'Y06 ' - Old 6-bit greyscale format. Only the least significant 6 bits of each byte are used, + Old 6-bit greyscale format. Only the most significant 6 bits of each byte are used, the other bits are set to 0. diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index 015c561754b7..008c2d73a484 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -560,6 +560,7 @@ and discussions on the V4L mailing list. &sub-g-tuner; &sub-log-status; &sub-overlay; + &sub-prepare-buf; &sub-qbuf; &sub-querybuf; &sub-querycap; @@ -567,7 +568,6 @@ and discussions on the V4L mailing list. &sub-query-dv-preset; &sub-query-dv-timings; &sub-querystd; - &sub-prepare-buf; &sub-reqbufs; &sub-s-hw-freq-seek; &sub-streamon; diff --git a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml index 765549ff8a71..a2474ecb574a 100644 --- a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml +++ b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml @@ -108,10 +108,9 @@ information. /> - __u32 + struct v4l2_format format - Filled in by the application, preserved by the driver. - See . + Filled in by the application, preserved by the driver. __u32 diff --git a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml index e8714aa16433..98a856f9ec30 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml @@ -89,7 +89,7 @@ &v4l2-event-frame-sync; - frame + frame_sync Event data for event V4L2_EVENT_FRAME_SYNC. diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml index e3d5afcdafbb..0a4b90fcf2da 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml @@ -284,13 +284,6 @@ These controls are described in . - - V4L2_CTRL_CLASS_JPEG - 0x9d0000 - The class containing JPEG compression controls. -These controls are described in . - diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt index 57aae7765c74..65610bf52ebf 100644 --- a/Documentation/arm/SPEAr/overview.txt +++ b/Documentation/arm/SPEAr/overview.txt @@ -60,4 +60,4 @@ Introduction Document Author --------------- - Viresh Kumar , (c) 2010-2012 ST Microelectronics + Viresh Kumar , (c) 2010-2012 ST Microelectronics diff --git a/Documentation/device-mapper/verity.txt b/Documentation/device-mapper/verity.txt index 32e48797a14f..9884681535ee 100644 --- a/Documentation/device-mapper/verity.txt +++ b/Documentation/device-mapper/verity.txt @@ -7,39 +7,39 @@ This target is read-only. Construction Parameters ======================= - + - This is the version number of the on-disk format. + This is the type of the on-disk hash format. 0 is the original format used in the Chromium OS. - The salt is appended when hashing, digests are stored continuously and - the rest of the block is padded with zeros. + The salt is appended when hashing, digests are stored continuously and + the rest of the block is padded with zeros. 1 is the current format that should be used for new devices. - The salt is prepended when hashing and each digest is - padded with zeros to the power of two. + The salt is prepended when hashing and each digest is + padded with zeros to the power of two. - This is the device containing the data the integrity of which needs to be + This is the device containing data, the integrity of which needs to be checked. It may be specified as a path, like /dev/sdaX, or a device number, :. - This is the device that that supplies the hash tree data. It may be + This is the device that supplies the hash tree data. It may be specified similarly to the device path and may be the same device. If the - same device is used, the hash_start should be outside of the dm-verity - configured device size. + same device is used, the hash_start should be outside the configured + dm-verity device. - The block size on a data device. Each block corresponds to one digest on - the hash device. + The block size on a data device in bytes. + Each block corresponds to one digest on the hash device. - The size of a hash block. + The size of a hash block in bytes. The number of data blocks on the data device. Additional blocks are @@ -65,7 +65,7 @@ Construction Parameters Theory of operation =================== -dm-verity is meant to be setup as part of a verified boot path. This +dm-verity is meant to be set up as part of a verified boot path. This may be anything ranging from a boot using tboot or trustedgrub to just booting from a known-good device (like a USB drive or CD). @@ -73,20 +73,20 @@ When a dm-verity device is configured, it is expected that the caller has been authenticated in some way (cryptographic signatures, etc). After instantiation, all hashes will be verified on-demand during disk access. If they cannot be verified up to the root node of the -tree, the root hash, then the I/O will fail. This should identify +tree, the root hash, then the I/O will fail. This should detect tampering with any data on the device and the hash data. Cryptographic hashes are used to assert the integrity of the device on a -per-block basis. This allows for a lightweight hash computation on first read -into the page cache. Block hashes are stored linearly-aligned to the nearest -block the size of a page. +per-block basis. This allows for a lightweight hash computation on first read +into the page cache. Block hashes are stored linearly, aligned to the nearest +block size. Hash Tree --------- Each node in the tree is a cryptographic hash. If it is a leaf node, the hash -is of some block data on disk. If it is an intermediary node, then the hash is -of a number of child nodes. +of some data block on disk is calculated. If it is an intermediary node, +the hash of a number of child nodes is calculated. Each entry in the tree is a collection of neighboring nodes that fit in one block. The number is determined based on block_size and the size of the @@ -110,63 +110,23 @@ alg = sha256, num_blocks = 32768, block_size = 4096 On-disk format ============== -Below is the recommended on-disk format. The verity kernel code does not -read the on-disk header. It only reads the hash blocks which directly -follow the header. It is expected that a user-space tool will verify the -integrity of the verity_header and then call dmsetup with the correct -parameters. Alternatively, the header can be omitted and the dmsetup -parameters can be passed via the kernel command-line in a rooted chain -of trust where the command-line is verified. +The verity kernel code does not read the verity metadata on-disk header. +It only reads the hash blocks which directly follow the header. +It is expected that a user-space tool will verify the integrity of the +verity header. -The on-disk format is especially useful in cases where the hash blocks -are on a separate partition. The magic number allows easy identification -of the partition contents. Alternatively, the hash blocks can be stored -in the same partition as the data to be verified. In such a configuration -the filesystem on the partition would be sized a little smaller than -the full-partition, leaving room for the hash blocks. - -struct superblock { - uint8_t signature[8] - "verity\0\0"; - - uint8_t version; - 1 - current format - - uint8_t data_block_bits; - log2(data block size) - - uint8_t hash_block_bits; - log2(hash block size) - - uint8_t pad1[1]; - zero padding - - uint16_t salt_size; - big-endian salt size - - uint8_t pad2[2]; - zero padding - - uint32_t data_blocks_hi; - big-endian high 32 bits of the 64-bit number of data blocks - - uint32_t data_blocks_lo; - big-endian low 32 bits of the 64-bit number of data blocks - - uint8_t algorithm[16]; - cryptographic algorithm - - uint8_t salt[384]; - salt (the salt size is specified above) - - uint8_t pad3[88]; - zero padding to 512-byte boundary -} +Alternatively, the header can be omitted and the dmsetup parameters can +be passed via the kernel command-line in a rooted chain of trust where +the command-line is verified. Directly following the header (and with sector number padded to the next hash block boundary) are the hash blocks which are stored a depth at a time (starting from the root), sorted in order of increasing index. +The full specification of kernel parameters and on-disk metadata format +is available at the cryptsetup project's wiki page + http://code.google.com/p/cryptsetup/wiki/DMVerity + Status ====== V (for Valid) is returned if every check performed so far was valid. @@ -174,21 +134,22 @@ If any check failed, C (for Corruption) is returned. Example ======= - -Setup a device: - dmsetup create vroot --table \ - "0 2097152 "\ - "verity 1 /dev/sda1 /dev/sda2 4096 4096 2097152 1 "\ +Set up a device: + # dmsetup create vroot --readonly --table \ + "0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\ "4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\ "1234000000000000000000000000000000000000000000000000000000000000" A command line tool veritysetup is available to compute or verify -the hash tree or activate the kernel driver. This is available from -the LVM2 upstream repository and may be supplied as a package called -device-mapper-verity-tools: - git://sources.redhat.com/git/lvm2 - http://sourceware.org/git/?p=lvm2.git - http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/verity?cvsroot=lvm2 +the hash tree or activate the kernel device. This is available from +the cryptsetup upstream repository http://code.google.com/p/cryptsetup/ +(as a libcryptsetup extension). -veritysetup -a vroot /dev/sda1 /dev/sda2 \ - 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 +Create hash on the device: + # veritysetup format /dev/sda1 /dev/sda2 + ... + Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 + +Activate the device: + # veritysetup create vroot /dev/sda1 /dev/sda2 \ + 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 diff --git a/Documentation/devicetree/bindings/input/fsl-mma8450.txt b/Documentation/devicetree/bindings/input/fsl-mma8450.txt index a00c94ccbdee..0b96e5737d3a 100644 --- a/Documentation/devicetree/bindings/input/fsl-mma8450.txt +++ b/Documentation/devicetree/bindings/input/fsl-mma8450.txt @@ -2,6 +2,7 @@ Required properties: - compatible : "fsl,mma8450". +- reg: the I2C address of MMA8450 Example: diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt index 19f6af47a792..baf07987ae68 100644 --- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt +++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt @@ -46,8 +46,8 @@ Examples: ecspi@70010000 { /* ECSPI1 */ fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */ - <&gpio3 25 0>; /* GPIO4_25 */ + cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */ + <&gpio4 25 0>; /* GPIO4_25 */ status = "okay"; pmic: mc13892@0 { diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index c7e404b3ef05..fea541ee8b34 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -29,6 +29,6 @@ esdhc@70008000 { compatible = "fsl,imx51-esdhc"; reg = <0x70008000 0x4000>; interrupts = <2>; - cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */ - wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */ + cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */ + wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */ }; diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index 7ab9e1a2d8be..4616fc28ee86 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -19,6 +19,6 @@ ethernet@83fec000 { reg = <0x83fec000 0x4000>; interrupts = <87>; phy-mode = "mii"; - phy-reset-gpios = <&gpio1 14 0>; /* GPIO2_14 */ + phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */ local-mac-address = [00 04 9F 01 1B B9]; }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt index 82b43f915857..a4119f6422d9 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt @@ -1626,3 +1626,5 @@ MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11 1587 MX6Q_PAD_SD2_DAT3__GPIO_1_12 1588 MX6Q_PAD_SD2_DAT3__SJC_DONE 1589 MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 1590 +MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID 1591 +MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID 1592 diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt index 9841057d112b..4256a6df9b79 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt @@ -17,6 +17,6 @@ ecspi@70010000 { reg = <0x70010000 0x4000>; interrupts = <36>; fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */ - <&gpio3 25 0>; /* GPIO4_25 */ + cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */ + <&gpio3 25 0>; /* GPIO3_25 */ }; diff --git a/Documentation/devicetree/bindings/thermal/spear-thermal.txt b/Documentation/devicetree/bindings/thermal/spear-thermal.txt new file mode 100644 index 000000000000..93e3b67c102d --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/spear-thermal.txt @@ -0,0 +1,14 @@ +* SPEAr Thermal + +Required properties: +- compatible : "st,thermal-spear1340" +- reg : Address range of the thermal registers +- st,thermal-flags: flags used to enable thermal sensor + +Example: + + thermal@fc000000 { + compatible = "st,thermal-spear1340"; + reg = <0xfc000000 0x1000>; + st,thermal-flags = <0x7000>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 6eab91747a86..db4d3af3643c 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -3,6 +3,7 @@ Device tree binding vendor prefix registry. Keep list in alphabetical order. This isn't an exhaustive list, but you should add new prefixes to it before using them to avoid name-space collisions. +ad Avionic Design GmbH adi Analog Devices, Inc. amcc Applied Micro Circuits Corporation (APM, formally AMCC) apm Applied Micro Circuits Corporation (APM) diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp index 84d46c0c71a3..c86b50c03ea8 100644 --- a/Documentation/hwmon/coretemp +++ b/Documentation/hwmon/coretemp @@ -6,7 +6,9 @@ Supported chips: Prefix: 'coretemp' CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm), 0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm), - 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield) + 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield), + 0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom), + 0x36 (Cedar Trail Atom) Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3A: System Programming Guide http://softwarecommunity.intel.com/Wiki/Mobility/720.htm @@ -52,6 +54,17 @@ Some information comes from ark.intel.com Process Processor TjMax(C) +22nm Core i5/i7 Processors + i7 3920XM, 3820QM, 3720QM, 3667U, 3520M 105 + i5 3427U, 3360M/3320M 105 + i7 3770/3770K 105 + i5 3570/3570K, 3550, 3470/3450 105 + i7 3770S 103 + i5 3570S/3550S, 3475S/3470S/3450S 103 + i7 3770T 94 + i5 3570T 94 + i5 3470T 91 + 32nm Core i3/i5/i7 Processors i7 660UM/640/620, 640LM/620, 620M, 610E 105 i5 540UM/520/430, 540M/520/450/430 105 @@ -65,6 +78,11 @@ Process Processor TjMax(C) U3400 105 P4505/P4500 90 +32nm Atom Processors + Z2460 90 + D2700/2550/2500 100 + N2850/2800/2650/2600 100 + 45nm Xeon Processors 5400 Quad-Core X5492, X5482, X5472, X5470, X5460, X5450 85 E5472, E5462, E5450/40/30/20/10/05 85 @@ -85,6 +103,8 @@ Process Processor TjMax(C) N475/470/455/450 100 N280/270 90 330/230 125 + E680/660/640/620 90 + E680T/660T/640T/620T 110 45nm Core2 Processors Solo ULV SU3500/3300 100 diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt index 506c7390c2b9..13f1aa09b938 100644 --- a/Documentation/kdump/kdump.txt +++ b/Documentation/kdump/kdump.txt @@ -86,7 +86,7 @@ There is also a gitweb interface available at http://www.kernel.org/git/?p=utils/kernel/kexec/kexec-tools.git More information about kexec-tools can be found at -http://www.kernel.org/pub/linux/utils/kernel/kexec/README.html +http://horms.net/projects/kexec/ 3) Unpack the tarball with the tar command, as follows: diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt index ab1e8d7004c5..5cb9a1972460 100644 --- a/Documentation/networking/stmmac.txt +++ b/Documentation/networking/stmmac.txt @@ -10,8 +10,8 @@ Currently this network device driver is for all STM embedded MAC/GMAC (i.e. 7xxx/5xxx SoCs), SPEAr (arm), Loongson1B (mips) and XLINX XC2V3000 FF1152AMT0221 D1215994A VIRTEX FPGA board. -DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether MAC 10/100 -Universal version 4.0 have been used for developing this driver. +DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether +MAC 10/100 Universal version 4.0 have been used for developing this driver. This driver supports both the platform bus and PCI. @@ -54,27 +54,27 @@ net_device structure enabling the scatter/gather feature. When one or more packets are received, an interrupt happens. The interrupts are not queued so the driver has to scan all the descriptors in the ring during the receive process. -This is based on NAPI so the interrupt handler signals only if there is work to be -done, and it exits. +This is based on NAPI so the interrupt handler signals only if there is work +to be done, and it exits. Then the poll method will be scheduled at some future point. The incoming packets are stored, by the DMA, in a list of pre-allocated socket buffers in order to avoid the memcpy (Zero-copy). 4.3) Timer-Driver Interrupt -Instead of having the device that asynchronously notifies the frame receptions, the -driver configures a timer to generate an interrupt at regular intervals. -Based on the granularity of the timer, the frames that are received by the device -will experience different levels of latency. Some NICs have dedicated timer -device to perform this task. STMMAC can use either the RTC device or the TMU -channel 2 on STLinux platforms. +Instead of having the device that asynchronously notifies the frame receptions, +the driver configures a timer to generate an interrupt at regular intervals. +Based on the granularity of the timer, the frames that are received by the +device will experience different levels of latency. Some NICs have dedicated +timer device to perform this task. STMMAC can use either the RTC device or the +TMU channel 2 on STLinux platforms. The timers frequency can be passed to the driver as parameter; when change it, take care of both hardware capability and network stability/performance impact. -Several performance tests on STM platforms showed this optimisation allows to spare -the CPU while having the maximum throughput. +Several performance tests on STM platforms showed this optimisation allows to +spare the CPU while having the maximum throughput. 4.4) WOL -Wake up on Lan feature through Magic and Unicast frames are supported for the GMAC -core. +Wake up on Lan feature through Magic and Unicast frames are supported for the +GMAC core. 4.5) DMA descriptors Driver handles both normal and enhanced descriptors. The latter has been only @@ -106,7 +106,8 @@ Several driver's information can be passed through the platform These are included in the include/linux/stmmac.h header file and detailed below as well: - struct plat_stmmacenet_data { +struct plat_stmmacenet_data { + char *phy_bus_name; int bus_id; int phy_addr; int interface; @@ -124,19 +125,24 @@ and detailed below as well: void (*bus_setup)(void __iomem *ioaddr); int (*init)(struct platform_device *pdev); void (*exit)(struct platform_device *pdev); + void *custom_cfg; + void *custom_data; void *bsp_priv; }; Where: + o phy_bus_name: phy bus name to attach to the stmmac. o bus_id: bus identifier. o phy_addr: the physical address can be passed from the platform. If it is set to -1 the driver will automatically detect it at run-time by probing all the 32 addresses. o interface: PHY device's interface. o mdio_bus_data: specific platform fields for the MDIO bus. - o pbl: the Programmable Burst Length is maximum number of beats to + o dma_cfg: internal DMA parameters + o pbl: the Programmable Burst Length is maximum number of beats to be transferred in one DMA transaction. GMAC also enables the 4xPBL by default. + o fixed_burst/mixed_burst/burst_len o clk_csr: fixed CSR Clock range selection. o has_gmac: uses the GMAC core. o enh_desc: if sets the MAC will use the enhanced descriptor structure. @@ -160,8 +166,9 @@ Where: this is sometime necessary on some platforms (e.g. ST boxes) where the HW needs to have set some PIO lines or system cfg registers. - o custom_cfg: this is a custom configuration that can be passed while - initialising the resources. + o custom_cfg/custom_data: this is a custom configuration that can be passed + while initialising the resources. + o bsp_priv: another private poiter. For MDIO bus The we have: @@ -180,7 +187,6 @@ Where: o irqs: list of IRQs, one per PHY. o probed_phy_irq: if irqs is NULL, use this for probed PHY. - For DMA engine we have the following internal fields that should be tuned according to the HW capabilities. diff --git a/Documentation/prctl/no_new_privs.txt b/Documentation/prctl/no_new_privs.txt new file mode 100644 index 000000000000..f7be84fba910 --- /dev/null +++ b/Documentation/prctl/no_new_privs.txt @@ -0,0 +1,57 @@ +The execve system call can grant a newly-started program privileges that +its parent did not have. The most obvious examples are setuid/setgid +programs and file capabilities. To prevent the parent program from +gaining these privileges as well, the kernel and user code must be +careful to prevent the parent from doing anything that could subvert the +child. For example: + + - The dynamic loader handles LD_* environment variables differently if + a program is setuid. + + - chroot is disallowed to unprivileged processes, since it would allow + /etc/passwd to be replaced from the point of view of a process that + inherited chroot. + + - The exec code has special handling for ptrace. + +These are all ad-hoc fixes. The no_new_privs bit (since Linux 3.5) is a +new, generic mechanism to make it safe for a process to modify its +execution environment in a manner that persists across execve. Any task +can set no_new_privs. Once the bit is set, it is inherited across fork, +clone, and execve and cannot be unset. With no_new_privs set, execve +promises not to grant the privilege to do anything that could not have +been done without the execve call. For example, the setuid and setgid +bits will no longer change the uid or gid; file capabilities will not +add to the permitted set, and LSMs will not relax constraints after +execve. + +To set no_new_privs, use prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0). + +Be careful, though: LSMs might also not tighten constraints on exec +in no_new_privs mode. (This means that setting up a general-purpose +service launcher to set no_new_privs before execing daemons may +interfere with LSM-based sandboxing.) + +Note that no_new_privs does not prevent privilege changes that do not +involve execve. An appropriately privileged task can still call +setuid(2) and receive SCM_RIGHTS datagrams. + +There are two main use cases for no_new_privs so far: + + - Filters installed for the seccomp mode 2 sandbox persist across + execve and can change the behavior of newly-executed programs. + Unprivileged users are therefore only allowed to install such filters + if no_new_privs is set. + + - By itself, no_new_privs can be used to reduce the attack surface + available to an unprivileged user. If everything running with a + given uid has no_new_privs set, then that uid will be unable to + escalate its privileges by directly attacking setuid, setgid, and + fcap-using binaries; it will need to compromise something without the + no_new_privs bit set first. + +In the future, other potentially dangerous kernel features could become +available to unprivileged tasks if no_new_privs is set. In principle, +several options to unshare(2) and clone(2) would be safe when +no_new_privs is set, and no_new_privs + chroot is considerable less +dangerous than chroot by itself. diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt index f0ab5cf28fca..4a7b54bd37e8 100644 --- a/Documentation/stable_kernel_rules.txt +++ b/Documentation/stable_kernel_rules.txt @@ -12,6 +12,12 @@ Rules on what kind of patches are accepted, and which ones are not, into the marked CONFIG_BROKEN), an oops, a hang, data corruption, a real security issue, or some "oh, that's not good" issue. In short, something critical. + - Serious issues as reported by a user of a distribution kernel may also + be considered if they fix a notable performance or interactivity issue. + As these fixes are not as obvious and have a higher risk of a subtle + regression they should only be submitted by a distribution kernel + maintainer and include an addendum linking to a bugzilla entry if it + exists and additional information on the user-visible impact. - New device IDs and quirks are also accepted. - No "theoretical race condition" issues, unless an explanation of how the race can be exploited is also provided. diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 1733ab947a95..c087dbcf3535 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -32,7 +32,8 @@ temperature) and throttle appropriate devices. 1.1 thermal zone device interface 1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, - int trips, void *devdata, struct thermal_zone_device_ops *ops) + int trips, int mask, void *devdata, + struct thermal_zone_device_ops *ops) This interface function adds a new thermal zone device (sensor) to /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the @@ -40,16 +41,17 @@ temperature) and throttle appropriate devices. name: the thermal zone name. trips: the total number of trip points this thermal zone supports. + mask: Bit string: If 'n'th bit is set, then trip point 'n' is writeable. devdata: device private data ops: thermal zone device call-backs. .bind: bind the thermal zone device with a thermal cooling device. .unbind: unbind the thermal zone device with a thermal cooling device. .get_temp: get the current temperature of the thermal zone. - .get_mode: get the current mode (user/kernel) of the thermal zone. - - "kernel" means thermal management is done in kernel. - - "user" will prevent kernel thermal driver actions upon trip points + .get_mode: get the current mode (enabled/disabled) of the thermal zone. + - "enabled" means the kernel thermal management is enabled. + - "disabled" will prevent kernel thermal driver action upon trip points so that user applications can take charge of thermal management. - .set_mode: set the mode (user/kernel) of the thermal zone. + .set_mode: set the mode (enabled/disabled) of the thermal zone. .get_trip_type: get the type of certain trip point. .get_trip_temp: get the temperature above which the certain trip point will be fired. @@ -119,6 +121,7 @@ Thermal zone device sys I/F, created once it's registered: |---mode: Working mode of the thermal zone |---trip_point_[0-*]_temp: Trip point temperature |---trip_point_[0-*]_type: Trip point type + |---trip_point_[0-*]_hyst: Hysteresis value for this trip point Thermal cooling device sys I/F, created once it's registered: /sys/class/thermal/cooling_device[0-*]: @@ -167,14 +170,14 @@ temp RO, Required mode - One of the predefined values in [kernel, user]. + One of the predefined values in [enabled, disabled]. This file gives information about the algorithm that is currently managing the thermal zone. It can be either default kernel based algorithm or user space application. - kernel = Thermal management in kernel thermal zone driver. - user = Preventing kernel thermal zone driver actions upon - trip points so that user application can take full - charge of the thermal management. + enabled = enable Kernel Thermal management. + disabled = Preventing kernel thermal zone driver actions upon + trip points so that user application can take full + charge of the thermal management. RW, Optional trip_point_[0-*]_temp @@ -188,6 +191,11 @@ trip_point_[0-*]_type thermal zone. RO, Optional +trip_point_[0-*]_hyst + The hysteresis value for a trip point, represented as an integer + Unit: Celsius + RW, Optional + cdev[0-*] Sysfs link to the thermal cooling device node where the sys I/F for cooling device throttling control represents. @@ -248,7 +256,7 @@ method, the sys I/F structure will be built like this: |thermal_zone1: |---type: acpitz |---temp: 37000 - |---mode: kernel + |---mode: enabled |---trip_point_0_temp: 100000 |---trip_point_0_type: critical |---trip_point_1_temp: 80000 diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 930126698a0f..2c9948379469 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1930,6 +1930,23 @@ The "pte_enc" field provides a value that can OR'ed into the hash PTE's RPN field (ie, it needs to be shifted left by 12 to OR it into the hash PTE second double word). +4.75 KVM_IRQFD + +Capability: KVM_CAP_IRQFD +Architectures: x86 +Type: vm ioctl +Parameters: struct kvm_irqfd (in) +Returns: 0 on success, -1 on error + +Allows setting an eventfd to directly trigger a guest interrupt. +kvm_irqfd.fd specifies the file descriptor to use as the eventfd and +kvm_irqfd.gsi specifies the irqchip pin toggled by this event. When +an event is tiggered on the eventfd, an interrupt is injected into +the guest using the specified gsi pin. The irqfd is removed using +the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd +and kvm_irqfd.gsi. + + 5. The kvm_run structure ------------------------ diff --git a/MAINTAINERS b/MAINTAINERS index 508a935afe04..41c06470a59c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -572,7 +572,7 @@ F: drivers/net/appletalk/ F: net/appletalk/ ARASAN COMPACT FLASH PATA CONTROLLER -M: Viresh Kumar +M: Viresh Kumar L: linux-ide@vger.kernel.org S: Maintained F: include/linux/pata_arasan_cf_data.h @@ -1639,11 +1639,11 @@ S: Maintained F: drivers/gpio/gpio-bt8xx.c BTRFS FILE SYSTEM -M: Chris Mason +M: Chris Mason L: linux-btrfs@vger.kernel.org W: http://btrfs.wiki.kernel.org/ Q: http://patchwork.kernel.org/project/linux-btrfs/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs.git S: Maintained F: Documentation/filesystems/btrfs.txt F: fs/btrfs/ @@ -1793,6 +1793,9 @@ F: include/linux/cfag12864b.h CFG80211 and NL80211 M: Johannes Berg L: linux-wireless@vger.kernel.org +W: http://wireless.kernel.org/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git S: Maintained F: include/linux/nl80211.h F: include/net/cfg80211.h @@ -3423,13 +3426,14 @@ S: Supported F: drivers/idle/i7300_idle.c IEEE 802.15.4 SUBSYSTEM +M: Alexander Smirnov M: Dmitry Eremin-Solenikov -M: Sergey Lapin L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://apps.sourceforge.net/trac/linux-zigbee T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git S: Maintained F: net/ieee802154/ +F: net/mac802154/ F: drivers/ieee802154/ IIO SUBSYSTEM AND DRIVERS @@ -4342,7 +4346,8 @@ MAC80211 M: Johannes Berg L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git S: Maintained F: Documentation/networking/mac80211-injection.txt F: include/net/mac80211.h @@ -4353,7 +4358,8 @@ M: Stefano Brivio M: Mattias Nissler L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID -T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git S: Maintained F: net/mac80211/rc80211_pid* @@ -4642,8 +4648,8 @@ L: netfilter@vger.kernel.org L: coreteam@netfilter.org W: http://www.netfilter.org/ W: http://www.iptables.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git -T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git +T: git git://1984.lsi.us.es/nf +T: git git://1984.lsi.us.es/nf-next S: Supported F: include/linux/netfilter* F: include/linux/netfilter/ @@ -4845,6 +4851,7 @@ M: Kevin Hilman L: linux-omap@vger.kernel.org S: Maintained F: arch/arm/*omap*/*pm* +F: drivers/cpufreq/omap-cpufreq.c OMAP POWERDOMAIN/CLOCKDOMAIN SOC ADAPTATION LAYER SUPPORT M: Rajendra Nayak @@ -5284,7 +5291,7 @@ S: Maintained F: drivers/pinctrl/ PIN CONTROLLER - ST SPEAR -M: Viresh Kumar +M: Viresh Kumar L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear @@ -5551,7 +5558,7 @@ F: Documentation/networking/LICENSE.qla3xxx F: drivers/net/ethernet/qlogic/qla3xxx.* QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER -M: Anirban Chakraborty +M: Jitendra Kalsaria M: Sony Chacko M: linux-driver@qlogic.com L: netdev@vger.kernel.org @@ -5559,7 +5566,6 @@ S: Supported F: drivers/net/ethernet/qlogic/qlcnic/ QLOGIC QLGE 10Gb ETHERNET DRIVER -M: Anirban Chakraborty M: Jitendra Kalsaria M: Ron Mercer M: linux-driver@qlogic.com @@ -5704,6 +5710,9 @@ F: include/linux/remoteproc.h RFKILL M: Johannes Berg L: linux-wireless@vger.kernel.org +W: http://wireless.kernel.org/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git S: Maintained F: Documentation/rfkill.txt F: net/rfkill/ @@ -5858,7 +5867,7 @@ S: Maintained F: drivers/tty/serial SYNOPSYS DESIGNWARE DMAC DRIVER -M: Viresh Kumar +M: Viresh Kumar S: Maintained F: include/linux/dw_dmac.h F: drivers/dma/dw_dmac_regs.h @@ -5894,7 +5903,7 @@ M: Ingo Molnar M: Peter Zijlstra T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core S: Maintained -F: kernel/sched* +F: kernel/sched/ F: include/linux/sched.h SCORE ARCHITECTURE @@ -6006,7 +6015,7 @@ S: Maintained F: drivers/mmc/host/sdhci-s3c.c SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER -M: Viresh Kumar +M: Viresh Kumar L: spear-devel@list.st.com L: linux-mmc@vger.kernel.org S: Maintained @@ -6362,7 +6371,7 @@ S: Maintained F: include/linux/compiler.h SPEAR PLATFORM SUPPORT -M: Viresh Kumar +M: Viresh Kumar M: Shiraz Hashim L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -6371,7 +6380,7 @@ S: Maintained F: arch/arm/plat-spear/ SPEAR13XX MACHINE SUPPORT -M: Viresh Kumar +M: Viresh Kumar M: Shiraz Hashim L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -6380,7 +6389,7 @@ S: Maintained F: arch/arm/mach-spear13xx/ SPEAR3XX MACHINE SUPPORT -M: Viresh Kumar +M: Viresh Kumar M: Shiraz Hashim L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -6391,7 +6400,7 @@ F: arch/arm/mach-spear3xx/ SPEAR6XX MACHINE SUPPORT M: Rajeev Kumar M: Shiraz Hashim -M: Viresh Kumar +M: Viresh Kumar L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear @@ -6399,7 +6408,7 @@ S: Maintained F: arch/arm/mach-spear6xx/ SPEAR CLOCK FRAMEWORK SUPPORT -M: Viresh Kumar +M: Viresh Kumar L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear @@ -7406,7 +7415,7 @@ F: include/linux/vlynq.h VME SUBSYSTEM M: Martyn Welch -M: Manohar Vanga +M: Manohar Vanga M: Greg Kroah-Hartman L: devel@driverdev.osuosl.org S: Maintained diff --git a/Makefile b/Makefile index d845c2a1aa68..4bb09e1b1230 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 5 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = NAME = Saber-toothed Squirrel # *DOCUMENTATION* @@ -561,6 +561,8 @@ else KBUILD_CFLAGS += -O2 endif +include $(srctree)/arch/$(SRCARCH)/Makefile + ifdef CONFIG_READABLE_ASM # Disable optimizations that make assembler listings hard to read. # reorder blocks reorders the control in the function @@ -571,8 +573,6 @@ KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \ $(call cc-option,-fno-partial-inlining) endif -include $(srctree)/arch/$(SRCARCH)/Makefile - ifneq ($(CONFIG_FRAME_WARN),0) KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN}) endif diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 84449dd8f031..a91009c61870 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -293,6 +293,7 @@ config ARCH_VERSATILE select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB + select NEED_MACH_IO_H if PCI select PLAT_VERSATILE select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_FPGA_IRQ @@ -588,6 +589,7 @@ config ARCH_ORION5X select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select NEED_MACH_IO_H select PLAT_ORION help Support for the following Marvell Orion 5x series SoCs: diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts index 153a4b2d12b5..c9b4f27d191e 100644 --- a/arch/arm/boot/dts/mmp2-brownstone.dts +++ b/arch/arm/boot/dts/mmp2-brownstone.dts @@ -11,7 +11,7 @@ /include/ "mmp2.dtsi" / { - model = "Marvell MMP2 Aspenite Development Board"; + model = "Marvell MMP2 Brownstone Development Board"; compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2"; chosen { @@ -19,7 +19,7 @@ }; memory { - reg = <0x00000000 0x04000000>; + reg = <0x00000000 0x08000000>; }; soc { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index f2ab4ea7cc0e..581cb081cb0f 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -44,6 +44,8 @@ compatible = "ti,omap2-intc"; interrupt-controller; #interrupt-cells = <1>; + ti,intc-size = <96>; + reg = <0x480FE000 0x1000>; }; uart1: serial@4806a000 { diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 8314e4171884..dd4358bc26e2 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1310 Evaluation Baord * - * Copyright 2012 Viresh Kumar + * Copyright 2012 Viresh Kumar * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 9e61da404d57..419ea7413d23 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1310 SoCs * - * Copyright 2012 Viresh Kumar + * Copyright 2012 Viresh Kumar * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index 0d8472e5ab9f..c9a54e06fb68 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1340 Evaluation Baord * - * Copyright 2012 Viresh Kumar + * Copyright 2012 Viresh Kumar * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index a26fc47a55e8..d71fe2a68f09 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1340 SoCs * - * Copyright 2012 Viresh Kumar + * Copyright 2012 Viresh Kumar * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 1f8e1e1481df..f7b84aced654 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr13xx SoCs * - * Copyright 2012 Viresh Kumar + * Copyright 2012 Viresh Kumar * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -43,8 +43,8 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 8 0x04 - 0 9 0x04>; + interrupts = <0 6 0x04 + 0 7 0x04>; }; L2: l2-cache { @@ -119,8 +119,8 @@ gmac0: eth@e2000000 { compatible = "st,spear600-gmac"; reg = <0xe2000000 0x8000>; - interrupts = <0 23 0x4 - 0 24 0x4>; + interrupts = <0 33 0x4 + 0 34 0x4>; interrupt-names = "macirq", "eth_wake_irq"; status = "disabled"; }; @@ -202,6 +202,7 @@ kbd@e0300000 { compatible = "st,spear300-kbd"; reg = <0xe0300000 0x1000>; + interrupts = <0 52 0x4>; status = "disabled"; }; @@ -224,7 +225,7 @@ serial@e0000000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xe0000000 0x1000>; - interrupts = <0 36 0x4>; + interrupts = <0 35 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index fc82b1a26458..d71b8d581e3d 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 Evaluation Baord * - * Copyright 2012 Viresh Kumar + * Copyright 2012 Viresh Kumar * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi index 01c5e358fdb2..ed3627c116cc 100644 --- a/arch/arm/boot/dts/spear300.dtsi +++ b/arch/arm/boot/dts/spear300.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 SoC * - * Copyright 2012 Viresh Kumar + * Copyright 2012 Viresh Kumar * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index dc5e2d445a93..b00544e0cd5d 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 Evaluation Baord * - * Copyright 2012 Viresh Kumar + * Copyright 2012 Viresh Kumar * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index e47081c494d9..62fc4fb3e5f9 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 SoC * - * Copyright 2012 Viresh Kumar + * Copyright 2012 Viresh Kumar * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 6308fa3bec1e..e4e912f95024 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 Evaluation Baord * - * Copyright 2012 Viresh Kumar + * Copyright 2012 Viresh Kumar * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -15,8 +15,8 @@ /include/ "spear320.dtsi" / { - model = "ST SPEAr300 Evaluation Board"; - compatible = "st,spear300-evb", "st,spear300"; + model = "ST SPEAr320 Evaluation Board"; + compatible = "st,spear320-evb", "st,spear320"; #address-cells = <1>; #size-cells = <1>; @@ -26,7 +26,7 @@ ahb { pinmux@b3000000 { - st,pinmux-mode = <3>; + st,pinmux-mode = <4>; pinctrl-names = "default"; pinctrl-0 = <&state_default>; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 5372ca399b1f..1f49d69595a0 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 SoC * - * Copyright 2012 Viresh Kumar + * Copyright 2012 Viresh Kumar * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index 91072553963f..3a8bb5736928 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr3xx SoCs * - * Copyright 2012 Viresh Kumar + * Copyright 2012 Viresh Kumar * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index 089f0a42c50e..a3c36e47d7ef 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -181,6 +181,7 @@ timer@f0000000 { compatible = "st,spear-timer"; reg = <0xf0000000 0x400>; + interrupt-parent = <&vic0>; interrupts = <16>; }; }; diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 9d7eb530f95f..aa07f5938f05 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -366,8 +366,8 @@ static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr, struct safe_buffer *buf; unsigned long off; - dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n", - __func__, addr, off, sz, dir); + dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n", + __func__, addr, sz, dir); buf = find_safe_buffer_dev(dev, addr, __func__); if (!buf) @@ -377,8 +377,8 @@ static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr, BUG_ON(buf->direction != dir); - dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", - __func__, buf->ptr, virt_to_dma(dev, buf->ptr), + dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n", + __func__, buf->ptr, virt_to_dma(dev, buf->ptr), off, buf->safe, buf->safe_dma_addr); DO_STATS(dev->archdata.dmabounce->bounce_count++); @@ -406,8 +406,8 @@ static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr, struct safe_buffer *buf; unsigned long off; - dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n", - __func__, addr, off, sz, dir); + dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n", + __func__, addr, sz, dir); buf = find_safe_buffer_dev(dev, addr, __func__); if (!buf) @@ -417,8 +417,8 @@ static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr, BUG_ON(buf->direction != dir); - dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", - __func__, buf->ptr, virt_to_dma(dev, buf->ptr), + dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n", + __func__, buf->ptr, virt_to_dma(dev, buf->ptr), off, buf->safe, buf->safe_dma_addr); DO_STATS(dev->archdata.dmabounce->bounce_count++); diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 9854ff4279e0..11828e632532 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -176,7 +176,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 68374ba6a943..c79f61faa3a5 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -243,7 +243,7 @@ typedef struct { #define ATOMIC64_INIT(i) { (i) } -static inline u64 atomic64_read(atomic64_t *v) +static inline u64 atomic64_read(const atomic64_t *v) { u64 result; diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h index 3d2220498abc..6ddbe446425e 100644 --- a/arch/arm/include/asm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -60,13 +60,13 @@ #ifndef __ASSEMBLY__ #ifdef CONFIG_CPU_USE_DOMAINS -#define set_domain(x) \ - do { \ - __asm__ __volatile__( \ - "mcr p15, 0, %0, c3, c0 @ set domain" \ - : : "r" (x)); \ - isb(); \ - } while (0) +static inline void set_domain(unsigned val) +{ + asm volatile( + "mcr p15, 0, %0, c3, c0 @ set domain" + : : "r" (val)); + isb(); +} #define modify_domain(dom,type) \ do { \ @@ -78,8 +78,8 @@ } while (0) #else -#define set_domain(x) do { } while (0) -#define modify_domain(dom,type) do { } while (0) +static inline void set_domain(unsigned val) { } +static inline void modify_domain(unsigned dom, unsigned type) { } #endif /* diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 7be54690aeec..e42cf597f6e6 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -19,6 +19,7 @@ " .long 1b, 4f, 2b, 4f\n" \ " .popsection\n" \ " .pushsection .fixup,\"ax\"\n" \ + " .align 2\n" \ "4: mov %0, " err_reg "\n" \ " b 3b\n" \ " .popsection" diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index e0d1c0cfa548..6b9b077d86b3 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -4,7 +4,7 @@ * ARM PrimeXsys System Controller SP810 header file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index b79f8e97f775..af7b0bda3355 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -148,7 +148,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ #define TIF_SYSCALL_TRACE 8 #define TIF_SYSCALL_AUDIT 9 -#define TIF_SYSCALL_RESTARTSYS 10 #define TIF_POLLING_NRFLAG 16 #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ @@ -164,11 +163,9 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_SYSCALL_RESTARTSYS (1 << TIF_SYSCALL_RESTARTSYS) /* Checks for any syscall work in entry-common.S */ -#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ - _TIF_SYSCALL_RESTARTSYS) +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT) /* * Change these and you break ASM code in entry-common.S diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 437f0c426517..0d1851ca6eb9 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -495,6 +495,7 @@ ENDPROC(__und_usr) * The out of line fixup for the ldrt above. */ .pushsection .fixup, "ax" + .align 2 4: mov pc, r9 .popsection .pushsection __ex_table,"a" diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index ba32b393b3f0..38c1a3b103a0 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -187,8 +187,8 @@ void kprobe_arm_test_cases(void) TEST_BF_R ("mov pc, r",0,2f,"") TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"") TEST_BB( "sub pc, pc, #1b-2b+8") -#if __LINUX_ARM_ARCH__ >= 6 - TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */ +#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7) + TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */ #endif TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"") TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc") diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c index 8f96ec778e8d..6123daf397a7 100644 --- a/arch/arm/kernel/kprobes-thumb.c +++ b/arch/arm/kernel/kprobes-thumb.c @@ -660,7 +660,7 @@ static const union decode_item t32_table_1111_100x[] = { /* LDRSB (literal) 1111 1001 x001 1111 xxxx xxxx xxxx xxxx */ /* LDRH (literal) 1111 1000 x011 1111 xxxx xxxx xxxx xxxx */ /* LDRSH (literal) 1111 1001 x011 1111 xxxx xxxx xxxx xxxx */ - DECODE_EMULATEX (0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal, + DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal, REGS(PC, NOSPPCX, 0, 0, 0)), /* STRB (immediate) 1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */ diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 186c8cb982c5..a02eada3aa5d 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -503,7 +503,7 @@ __hw_perf_event_init(struct perf_event *event) event_requires_mode_exclusion(&event->attr)) { pr_debug("ARM performance counters do not support " "mode exclusion\n"); - return -EPERM; + return -EOPNOTSUPP; } /* diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 5700a7ae7f0b..14e38261cd31 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include @@ -918,8 +917,6 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); - if (why == 0 && test_and_clear_thread_flag(TIF_SYSCALL_RESTARTSYS)) - scno = __NR_restart_syscall - __NR_SYSCALL_BASE; if (!test_thread_flag(TIF_SYSCALL_TRACE)) return scno; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index fd2392a17ac1..536c5d6b340b 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -27,6 +27,7 @@ */ #define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)) #define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)) +#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE) /* * With EABI, the syscall number has to be loaded into r7. @@ -46,6 +47,18 @@ const unsigned long sigreturn_codes[7] = { MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN, }; +/* + * Either we support OABI only, or we have EABI with the OABI + * compat layer enabled. In the later case we don't know if + * user space is EABI or not, and if not we must not clobber r7. + * Always using the OABI syscall solves that issue and works for + * all those cases. + */ +const unsigned long syscall_restart_code[2] = { + SWI_SYS_RESTART, /* swi __NR_restart_syscall */ + 0xe49df004, /* ldr pc, [sp], #4 */ +}; + /* * atomically swap in the new signal mask, and wait for a signal. */ @@ -592,10 +605,12 @@ static void do_signal(struct pt_regs *regs, int syscall) case -ERESTARTNOHAND: case -ERESTARTSYS: case -ERESTARTNOINTR: - case -ERESTART_RESTARTBLOCK: regs->ARM_r0 = regs->ARM_ORIG_r0; regs->ARM_pc = restart_addr; break; + case -ERESTART_RESTARTBLOCK: + regs->ARM_r0 = -EINTR; + break; } } @@ -611,14 +626,12 @@ static void do_signal(struct pt_regs *regs, int syscall) * debugger has chosen to restart at a different PC. */ if (regs->ARM_pc == restart_addr) { - if (retval == -ERESTARTNOHAND || - retval == -ERESTART_RESTARTBLOCK + if (retval == -ERESTARTNOHAND || (retval == -ERESTARTSYS && !(ka.sa.sa_flags & SA_RESTART))) { regs->ARM_r0 = -EINTR; regs->ARM_pc = continue_addr; } - clear_thread_flag(TIF_SYSCALL_RESTARTSYS); } handle_signal(signr, &ka, &info, regs); @@ -632,8 +645,29 @@ static void do_signal(struct pt_regs *regs, int syscall) * ignore the restart. */ if (retval == -ERESTART_RESTARTBLOCK - && regs->ARM_pc == restart_addr) - set_thread_flag(TIF_SYSCALL_RESTARTSYS); + && regs->ARM_pc == continue_addr) { + if (thumb_mode(regs)) { + regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE; + regs->ARM_pc -= 2; + } else { +#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT) + regs->ARM_r7 = __NR_restart_syscall; + regs->ARM_pc -= 4; +#else + u32 __user *usp; + + regs->ARM_sp -= 4; + usp = (u32 __user *)regs->ARM_sp; + + if (put_user(regs->ARM_pc, usp) == 0) { + regs->ARM_pc = KERN_RESTART_CODE; + } else { + regs->ARM_sp += 4; + force_sigsegv(0, current); + } +#endif + } + } } restore_saved_sigmask(); diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h index 5ff067b7c752..6fcfe8398aa4 100644 --- a/arch/arm/kernel/signal.h +++ b/arch/arm/kernel/signal.h @@ -8,5 +8,7 @@ * published by the Free Software Foundation. */ #define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500) +#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes)) extern const unsigned long sigreturn_codes[7]; +extern const unsigned long syscall_restart_code[2]; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 4928d89758f4..3647170e9a16 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -820,6 +820,8 @@ void __init early_trap_init(void *vectors_base) */ memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE), sigreturn_codes, sizeof(sigreturn_codes)); + memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE), + syscall_restart_code, sizeof(syscall_restart_code)); flush_icache_range(vectors, vectors + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 43a31fb06318..36ff15bbfdd4 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -183,7 +183,9 @@ SECTIONS } #endif +#ifdef CONFIG_SMP PERCPU_SECTION(L1_CACHE_BYTES) +#endif #ifdef CONFIG_XIP_KERNEL __data_loc = ALIGN(4); /* location in binary */ diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h index 226949dc4ac0..f953bb54aa9d 100644 --- a/arch/arm/mach-dove/include/mach/bridge-regs.h +++ b/arch/arm/mach-dove/include/mach/bridge-regs.h @@ -50,5 +50,6 @@ #define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c) #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #endif diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index ad1165d488c1..d52b0ef313b7 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -78,6 +78,7 @@ /* North-South Bridge */ #define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000) +#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000) /* Cryptographic Engine */ #define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000) diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 573be57d3d28..6f6d13f91e4c 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -212,7 +212,7 @@ config MACH_SMDKV310 select EXYNOS_DEV_SYSMMU select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select SAMSUNG_DEV_PWM select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 @@ -264,7 +264,7 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_ONENAND select S5P_DEV_TV select EXYNOS_DEV_SYSMMU - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS_DEV_DRM select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 @@ -303,7 +303,7 @@ config MACH_NURI select S5P_DEV_MFC select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS_DEV_DRM select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -341,7 +341,7 @@ config MACH_ORIGEN select SAMSUNG_DEV_PWM select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index e9fafcf163de..373c3c00d24c 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -119,7 +119,9 @@ static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, struct exynos_pm_domain *pd) { if (pdev->dev.bus) { - if (pm_genpd_add_device(&pd->pd, &pdev->dev)) + if (!pm_genpd_add_device(&pd->pd, &pdev->dev)) + pm_genpd_dev_need_restore(&pdev->dev, true); + else pr_info("%s: error in adding %s device to %s power" "domain\n", __func__, dev_name(&pdev->dev), pd->name); @@ -151,9 +153,12 @@ static __init int exynos4_pm_init_power_domain(void) if (of_have_populated_dt()) return exynos_pm_dt_parse_domains(); - for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) - pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL, - exynos4_pm_domains[idx]->is_off); + for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) { + struct exynos_pm_domain *pd = exynos4_pm_domains[idx]; + int on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN; + + pm_genpd_init(&pd->pd, NULL, !on); + } #ifdef CONFIG_S5P_DEV_FIMD0 exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0); diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index f8437dd238c2..ded4652ada80 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -1,4 +1,8 @@ -obj-y := clock.o highbank.o system.o +obj-y := clock.o highbank.o system.o smc.o + +plus_sec := $(call as-instr,.arch_extension sec,+sec) +AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) + obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h index d8e2d0be64ac..141ed5171826 100644 --- a/arch/arm/mach-highbank/core.h +++ b/arch/arm/mach-highbank/core.h @@ -8,3 +8,4 @@ extern void highbank_lluart_map_io(void); static inline void highbank_lluart_map_io(void) {} #endif +extern void highbank_smc1(int fn, int arg); diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 410a112bb52e..8777612b1a42 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -85,10 +85,24 @@ const static struct of_device_id irq_match[] = { {} }; +#ifdef CONFIG_CACHE_L2X0 +static void highbank_l2x0_disable(void) +{ + /* Disable PL310 L2 Cache controller */ + highbank_smc1(0x102, 0x0); +} +#endif + static void __init highbank_init_irq(void) { of_irq_init(irq_match); + +#ifdef CONFIG_CACHE_L2X0 + /* Enable PL310 L2 Cache controller */ + highbank_smc1(0x102, 0x1); l2x0_of_init(0, ~0UL); + outer_cache.disable = highbank_l2x0_disable; +#endif } static void __init highbank_timer_init(void) diff --git a/arch/arm/mach-highbank/smc.S b/arch/arm/mach-highbank/smc.S new file mode 100644 index 000000000000..407d17baaaa9 --- /dev/null +++ b/arch/arm/mach-highbank/smc.S @@ -0,0 +1,27 @@ +/* + * Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc. + * Copyright 2012 Calxeda, Inc. + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +/* + * This is common routine to manage secure monitor API + * used to modify the PL310 secure registers. + * 'r0' contains the value to be modified and 'r12' contains + * the monitor API number. + * Function signature : void highbank_smc1(u32 fn, u32 arg) + */ + +ENTRY(highbank_smc1) + stmfd sp!, {r4-r11, lr} + mov r12, r0 + mov r0, r1 + dsb + smc #0 + ldmfd sp!, {r4-r11, pc} +ENDPROC(highbank_smc1) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0021f726b153..eff4db5de0dd 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -477,6 +477,7 @@ config MACH_MX31_3DS select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c index 0f0beb580b73..516ddee1948e 100644 --- a/arch/arm/mach-imx/clk-imx1.c +++ b/arch/arm/mach-imx/clk-imx1.c @@ -108,8 +108,7 @@ int __init mx1_clocks_init(unsigned long fref) clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0"); clk_register_clkdev(clk[clko], "clko", NULL); - mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), - MX1_TIM1_INT); + mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT); return 0; } diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c index 4e4f384ee8dd..ea13e61bd5f3 100644 --- a/arch/arm/mach-imx/clk-imx21.c +++ b/arch/arm/mach-imx/clk-imx21.c @@ -180,7 +180,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL); clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL); - mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), - MX21_INT_GPT1); + mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1); + return 0; } diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index d9833bb5fd61..fdd8cc87c9fe 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -243,6 +243,6 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma"); clk_register_clkdev(clk[iim_ipg], "iim", NULL); - mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); + mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; } diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 50a7ebd8d1b2..295cbd7c08dc 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -263,8 +263,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0"); clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1"); - mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), - MX27_INT_GPT1); + mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1); clk_prepare_enable(clk[emi_ahb_gate]); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index a854b9cae5ea..c9a06d800f8e 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -175,8 +175,7 @@ int __init mx31_clocks_init(unsigned long fref) mx31_revision(); clk_disable_unprepare(clk[iim_gate]); - mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), - MX31_INT_GPT); + mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT); return 0; } diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index a9e60bf7dd75..c6422fb10bae 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -201,7 +201,6 @@ int __init mx35_clocks_init() pr_err("i.MX35 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - clk_register_clkdev(clk[pata_gate], NULL, "pata_imx"); clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0"); clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1"); @@ -264,14 +263,20 @@ int __init mx35_clocks_init() clk_prepare_enable(clk[iim_gate]); clk_prepare_enable(clk[emi_gate]); + /* + * SCC is needed to boot via mmc after a watchdog reset. The clock code + * before conversion to common clk also enabled UART1 (which isn't + * handled here and not needed for mmc) and IIM (which is enabled + * unconditionally above). + */ + clk_prepare_enable(clk[scc_gate]); + imx_print_silicon_rev("i.MX35", mx35_revision()); #ifdef CONFIG_MXC_USE_EPIT - epit_timer_init(&epit1_clk, - MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); + epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); #else - mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), - MX35_INT_GPT); + mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); #endif return 0; diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index fcd94f3b0f0e..a2200c77bf70 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -104,12 +104,12 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, periph_apm_sel, ARRAY_SIZE(periph_apm_sel)); clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1, main_bus_sel, ARRAY_SIZE(main_bus_sel)); - clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1, + clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1, per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel)); clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2); clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3); clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3); - clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0, + clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1, per_root_sel, ARRAY_SIZE(per_root_sel)); clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3); clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28); @@ -172,7 +172,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12); clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14); clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16); - clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18); + clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per_root", MXC_CCM_CCGR2, 18); clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24); clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26); clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28); @@ -366,8 +366,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_set_rate(clk[esdhc_b_podf], 166250000); /* System timer */ - mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), - MX51_INT_GPT); + mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT); clk_prepare_enable(clk[iim_gate]); imx_print_silicon_rev("i.MX51", mx51_revision()); @@ -452,8 +451,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_set_rate(clk[esdhc_b_podf], 200000000); /* System timer */ - mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), - MX53_INT_GPT); + mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT); clk_prepare_enable(clk[iim_gate]); imx_print_silicon_rev("i.MX53", mx53_revision()); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index cab02d0a15d6..e1a17ac7b3b4 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -122,10 +122,6 @@ static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5 "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0", "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", }; -static const char * const clks_init_on[] __initconst = { - "mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3", -}; - enum mx6q_clks { dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m, pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m, @@ -156,16 +152,20 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, clk_max + ssi2_ipg, ssi3_ipg, rom, + clk_max }; static struct clk *clk[clk_max]; +static enum mx6q_clks const clks_init_on[] __initconst = { + mmdc_ch0_axi, rom, +}; + int __init mx6q_clocks_init(void) { struct device_node *np; void __iomem *base; - struct clk *c; int i, irq; clk[dummy] = imx_clk_fixed("dummy", 0); @@ -365,6 +365,7 @@ int __init mx6q_clocks_init(void) clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26); clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28); clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30); + clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4); clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); @@ -424,21 +425,14 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[ahb], "ahb", NULL); clk_register_clkdev(clk[cko1], "cko1", NULL); - for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) { - c = clk_get_sys(clks_init_on[i], NULL); - if (IS_ERR(c)) { - pr_err("%s: failed to get clk %s", __func__, - clks_init_on[i]); - return PTR_ERR(c); - } - clk_prepare_enable(c); - } + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clk[clks_init_on[i]]); np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(NULL, base, irq); + mxc_timer_init(base, irq); return 0; } diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c index 4685919deb63..0440379e3628 100644 --- a/arch/arm/mach-imx/clk-pllv2.c +++ b/arch/arm/mach-imx/clk-pllv2.c @@ -74,30 +74,15 @@ struct clk_pllv2 { void __iomem *base; }; -static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) +static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate, + u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn) { long mfi, mfn, mfd, pdf, ref_clk, mfn_abs; - unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl; - void __iomem *pllbase; + unsigned long dbl; s64 temp; - struct clk_pllv2 *pll = to_clk_pllv2(hw); - pllbase = pll->base; - - dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); - pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN; - if (pll_hfsm == 0) { - dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); - dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); - dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); - } else { - dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP); - dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD); - dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN); - } pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK; mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET; mfi = (mfi <= 5) ? 5 : mfi; @@ -123,18 +108,30 @@ static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, return temp; } -static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, +static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { - struct clk_pllv2 *pll = to_clk_pllv2(hw); - u32 reg; + u32 dp_op, dp_mfd, dp_mfn, dp_ctl; void __iomem *pllbase; + struct clk_pllv2 *pll = to_clk_pllv2(hw); + + pllbase = pll->base; + + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); + dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); + dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); + dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); + + return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn); +} + +static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate, + u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn) +{ + u32 reg; long mfi, pdf, mfn, mfd = 999999; s64 temp64; unsigned long quad_parent_rate; - unsigned long pll_hfsm, dp_ctl; - - pllbase = pll->base; quad_parent_rate = 4 * parent_rate; pdf = mfi = -1; @@ -144,25 +141,41 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, return -EINVAL; pdf--; - temp64 = rate * (pdf+1) - quad_parent_rate * mfi; - do_div(temp64, quad_parent_rate/1000000); + temp64 = rate * (pdf + 1) - quad_parent_rate * mfi; + do_div(temp64, quad_parent_rate / 1000000); mfn = (long)temp64; + reg = mfi << 4 | pdf; + + *dp_op = reg; + *dp_mfd = mfd; + *dp_mfn = mfn; + + return 0; +} + +static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_pllv2 *pll = to_clk_pllv2(hw); + void __iomem *pllbase; + u32 dp_ctl, dp_op, dp_mfd, dp_mfn; + int ret; + + pllbase = pll->base; + + + ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn); + if (ret) + return ret; + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); /* use dpdck0_2 */ __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL); - pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; - if (pll_hfsm == 0) { - reg = mfi << 4 | pdf; - __raw_writel(reg, pllbase + MXC_PLL_DP_OP); - __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD); - __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN); - } else { - reg = mfi << 4 | pdf; - __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP); - __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD); - __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN); - } + + __raw_writel(dp_op, pllbase + MXC_PLL_DP_OP); + __raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD); + __raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN); return 0; } @@ -170,7 +183,11 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { - return rate; + u32 dp_op, dp_mfd, dp_mfn; + + __clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn); + return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN, + dp_op, dp_mfd, dp_mfn); } static int clk_pllv2_prepare(struct clk_hw *hw) diff --git a/arch/arm/mach-imx/crm-regs-imx5.h b/arch/arm/mach-imx/crm-regs-imx5.h index 5e11ba7daee2..5e3f1f0f4cab 100644 --- a/arch/arm/mach-imx/crm-regs-imx5.h +++ b/arch/arm/mach-imx/crm-regs-imx5.h @@ -23,7 +23,7 @@ #define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR) #define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR) #define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR) -#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR) +#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR) /* PLL Register Offsets */ #define MXC_PLL_DP_CTL 0x00 diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 89493abd497c..20ed2d56c1af 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -12,6 +12,7 @@ #include #include +#include #include int platform_cpu_kill(unsigned int cpu) @@ -19,6 +20,44 @@ int platform_cpu_kill(unsigned int cpu) return 1; } +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + flush_cache_all(); + asm volatile( + "mcr p15, 0, %1, c7, c5, 0\n" + " mcr p15, 0, %1, c7, c10, 4\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, %3\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0), "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile( + "mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} + /* * platform-specific code to shutdown a CPU * @@ -26,9 +65,10 @@ int platform_cpu_kill(unsigned int cpu) */ void platform_cpu_die(unsigned int cpu) { - flush_cache_all(); + cpu_enter_lowpower(); imx_enable_cpu(cpu, false); cpu_do_idle(); + cpu_leave_lowpower(); /* We should never return from idle */ panic("cpu %d unexpectedly exit from shutdown\n", cpu); diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index c515f8ede1a1..6450303f1a7a 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -70,7 +70,6 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { I2C_BOARD_INFO("pcf8563", 0x51), }, { I2C_BOARD_INFO("tsc2007", 0x48), - .type = "tsc2007", .platform_data = &tsc2007_info, .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO), }, diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index ac50f1671e38..1e09de50cbcd 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -142,7 +142,6 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = { I2C_BOARD_INFO("pcf8563", 0x51), }, { I2C_BOARD_INFO("tsc2007", 0x49), - .type = "tsc2007", .platform_data = &tsc2007_info, }, }; diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index dff82eb57cd9..ba09552fe5fe 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -38,7 +38,7 @@ #include #include #include -#include +#include #include #include @@ -116,6 +116,8 @@ static const int visstrim_m10_pins[] __initconst = { PB23_PF_USB_PWR, PB24_PF_USB_OC, /* CSI */ + TVP5150_RSTN | GPIO_GPIO | GPIO_OUT, + TVP5150_PWDN | GPIO_GPIO | GPIO_OUT, PB10_PF_CSI_D0, PB11_PF_CSI_D1, PB12_PF_CSI_D2, @@ -147,6 +149,24 @@ static struct gpio visstrim_m10_version_gpios[] = { { MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" }, }; +static const struct gpio visstrim_m10_gpios[] __initconst = { + { + .gpio = TVP5150_RSTN, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH, + .label = "tvp5150_rstn", + }, + { + .gpio = TVP5150_PWDN, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, + .label = "tvp5150_pwdn", + }, + { + .gpio = OTG_PHY_CS_GPIO, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, + .label = "usbotg_cs", + }, +}; + /* Camera */ static int visstrim_camera_power(struct device *dev, int on) { @@ -190,13 +210,6 @@ static void __init visstrim_camera_init(void) struct platform_device *pdev; int dma; - /* Initialize tvp5150 gpios */ - mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT); - mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT); - gpio_set_value(TVP5150_RSTN, 1); - gpio_set_value(TVP5150_PWDN, 0); - ndelay(1); - gpio_set_value(TVP5150_PWDN, 1); ndelay(1); gpio_set_value(TVP5150_RSTN, 0); @@ -377,10 +390,6 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { /* USB OTG */ static int otg_phy_init(struct platform_device *pdev) { - gpio_set_value(OTG_PHY_CS_GPIO, 0); - - mdelay(10); - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); } @@ -435,6 +444,11 @@ static void __init visstrim_m10_board_init(void) if (ret) pr_err("Failed to setup pins (%d)\n", ret); + ret = gpio_request_array(visstrim_m10_gpios, + ARRAY_SIZE(visstrim_m10_gpios)); + if (ret) + pr_err("Failed to request gpios (%d)\n", ret); + imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index d14bbe949a4f..3e7401fca76c 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -32,7 +32,7 @@ * Memory-mapped I/O on MX21ADS base board */ #define MX21ADS_MMIO_BASE_ADDR 0xf5000000 -#define MX21ADS_MMIO_SIZE SZ_16M +#define MX21ADS_MMIO_SIZE 0xc00000 #define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ (MX21ADS_MMIO_BASE_ADDR + (offset)) diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 967ed5b35a45..a8983b9778d1 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -86,6 +86,7 @@ static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size, void __init imx3_init_l2x0(void) { +#ifdef CONFIG_CACHE_L2X0 void __iomem *l2x0_base; void __iomem *clkctl_base; @@ -115,6 +116,7 @@ void __init imx3_init_l2x0(void) } l2x0_init(l2x0_base, 0x00030024, 0x00000000); +#endif } #ifdef CONFIG_SOC_IMX31 @@ -179,6 +181,8 @@ void __init imx31_soc_init(void) mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); + pinctrl_provide_dummies(); + if (to_version == 1) { strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin", strlen(imx31_sdma_pdata.fw_name)); diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index feeee17da96b..1d003053d562 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -202,6 +202,8 @@ void __init imx51_soc_init(void) mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH); mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH); + pinctrl_provide_dummies(); + /* i.mx51 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index 2222c5739519..b0d3cc49269d 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -20,9 +20,6 @@ #include #include #include -#include -#include -#include #include #include #include diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 25fb3fd418ef..f261cd242643 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -159,6 +159,7 @@ static struct clk __init *clk_register_gate_fn(struct device *dev, gate_fn->gate.flags = clk_gate_flags; gate_fn->gate.lock = lock; gate_fn->gate.hw.init = &init; + gate_fn->fn = fn; /* ops is the gate ops, but with our disable function */ if (clk_gate_fn_ops.disable != clk_gate_fn_disable) { @@ -193,9 +194,11 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name, bit_idx, 0, &gating_lock, fn); } +static struct clk *ge0, *ge1; + void __init kirkwood_clk_init(void) { - struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio; + struct clk *runit, *sata0, *sata1, *usb0, *sdio; struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio; tclk = clk_register_fixed_rate(NULL, "tclk", NULL, @@ -257,6 +260,9 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, IRQ_KIRKWOOD_GE00_ERR); + /* The interface forgets the MAC address assigned by u-boot if + the clock is turned off, so claim the clk now. */ + clk_prepare_enable(ge0); } @@ -268,6 +274,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, IRQ_KIRKWOOD_GE01_ERR); + clk_prepare_enable(ge1); } diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 3eee37a3b501..a115142f8690 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -38,6 +38,7 @@ #define IRQ_MASK_HIGH_OFF 0x0014 #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) #define L2_WRITETHROUGH 0x00000010 diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index fede3d503efa..c5b68510776b 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -80,6 +80,7 @@ #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) #define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000) #define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000) diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h deleted file mode 100644 index 0e135a599f3e..000000000000 --- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __ASM_MACH_GPIO_PXA_H -#define __ASM_MACH_GPIO_PXA_H - -#include -#include -#include - -#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) - -#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) - -#define gpio_to_bank(gpio) ((gpio) >> 5) - -/* NOTE: these macros are defined here to make optimization of - * gpio_{get,set}_value() to work when 'gpio' is a constant. - * Usage of these macros otherwise is no longer recommended, - * use generic GPIO API whenever possible. - */ -#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f)) - -#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00) -#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c) -#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18) -#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24) - -#include - -#endif /* __ASM_MACH_GPIO_PXA_H */ diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c index fcfe0e3bd701..e60c7d98922b 100644 --- a/arch/arm/mach-mmp/irq.c +++ b/arch/arm/mach-mmp/irq.c @@ -241,6 +241,7 @@ void __init mmp2_init_icu(void) icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE; icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE; icu_data[1].nr_irqs = 2; + icu_data[1].cascade_irq = 4; icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE; icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs, icu_data[1].virq_base, 0, @@ -249,6 +250,7 @@ void __init mmp2_init_icu(void) icu_data[2].reg_status = mmp_icu_base + 0x154; icu_data[2].reg_mask = mmp_icu_base + 0x16c; icu_data[2].nr_irqs = 2; + icu_data[2].cascade_irq = 5; icu_data[2].virq_base = IRQ_MMP2_RTC_BASE; icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs, icu_data[2].virq_base, 0, @@ -257,6 +259,7 @@ void __init mmp2_init_icu(void) icu_data[3].reg_status = mmp_icu_base + 0x180; icu_data[3].reg_mask = mmp_icu_base + 0x17c; icu_data[3].nr_irqs = 3; + icu_data[3].cascade_irq = 9; icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE; icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs, icu_data[3].virq_base, 0, @@ -265,6 +268,7 @@ void __init mmp2_init_icu(void) icu_data[4].reg_status = mmp_icu_base + 0x158; icu_data[4].reg_mask = mmp_icu_base + 0x170; icu_data[4].nr_irqs = 5; + icu_data[4].cascade_irq = 17; icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE; icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs, icu_data[4].virq_base, 0, @@ -273,6 +277,7 @@ void __init mmp2_init_icu(void) icu_data[5].reg_status = mmp_icu_base + 0x15c; icu_data[5].reg_mask = mmp_icu_base + 0x174; icu_data[5].nr_irqs = 15; + icu_data[5].cascade_irq = 35; icu_data[5].virq_base = IRQ_MMP2_MISC_BASE; icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs, icu_data[5].virq_base, 0, @@ -281,6 +286,7 @@ void __init mmp2_init_icu(void) icu_data[6].reg_status = mmp_icu_base + 0x160; icu_data[6].reg_mask = mmp_icu_base + 0x178; icu_data[6].nr_irqs = 2; + icu_data[6].cascade_irq = 51; icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE; icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs, icu_data[6].virq_base, 0, @@ -289,6 +295,7 @@ void __init mmp2_init_icu(void) icu_data[7].reg_status = mmp_icu_base + 0x188; icu_data[7].reg_mask = mmp_icu_base + 0x184; icu_data[7].nr_irqs = 2; + icu_data[7].cascade_irq = 55; icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE; icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs, icu_data[7].virq_base, 0, diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h index c64dbb96dbad..eb187e0e059b 100644 --- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h +++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h @@ -31,5 +31,6 @@ #define IRQ_MASK_HIGH_OFF 0x0014 #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index 3674497162e3..e807c4c52a0b 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -42,6 +42,7 @@ #define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000 #define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000 #define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000 +#define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000 #define MV78XX0_CORE_REGS_SIZE SZ_16K #define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20)) @@ -59,6 +60,7 @@ * Core-specific peripheral registers. */ #define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) +#define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE) /* * Register Map diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c index 5e90b9dcdef8..f5f061757deb 100644 --- a/arch/arm/mach-mxs/mach-apx4devkit.c +++ b/arch/arm/mach-mxs/mach-apx4devkit.c @@ -205,6 +205,16 @@ static int apx4devkit_phy_fixup(struct phy_device *phy) return 0; } +static void __init apx4devkit_fec_phy_clk_enable(void) +{ + struct clk *clk; + + /* Enable fec phy clock */ + clk = clk_get_sys("enet_out", NULL); + if (!IS_ERR(clk)) + clk_prepare_enable(clk); +} + static void __init apx4devkit_init(void) { mx28_soc_init(); @@ -225,6 +235,7 @@ static void __init apx4devkit_init(void) phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK, apx4devkit_phy_fixup); + apx4devkit_fec_phy_clk_enable(); mx28_add_fec(0, &mx28_fec_pdata); mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata); diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 70a81f900bb5..53c39d239d6e 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -97,11 +97,6 @@ __init board_onenand_init(struct mtd_partition *onenand_parts, gpmc_onenand_init(&board_onenand_data); } -#else -void -__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs) -{ -} #endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */ #if defined(CONFIG_MTD_NAND_OMAP2) || \ diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 8ca14e88a31a..2c5d0ed75285 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -83,11 +83,9 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data tusb_data = { -#if defined(CONFIG_USB_MUSB_OTG) +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_PERIPHERAL) - .mode = MUSB_PERIPHERAL, -#else /* defined(CONFIG_USB_MUSB_HOST) */ +#else .mode = MUSB_HOST, #endif .set_power = tusb_set_power, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 79c6909eeb78..580fd17208da 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -81,13 +81,13 @@ static u8 omap3_beagle_version; static struct { int mmc1_gpio_wp; int usb_pwr_level; - int reset_gpio; + int dvi_pd_gpio; int usr_button_gpio; int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, .usb_pwr_level = GPIOF_OUT_INIT_LOW, - .reset_gpio = 129, + .dvi_pd_gpio = -EINVAL, .usr_button_gpio = 4, .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, }; @@ -126,21 +126,21 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; beagle_config.mmc1_gpio_wp = 29; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 6: printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 5: printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 0: @@ -274,11 +274,9 @@ static int beagle_twl_gpio_setup(struct device *dev, if (r) pr_err("%s: unable to configure nDVI_PWR_EN\n", __func__); - r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, - "DVI_LDO_EN"); - if (r) - pr_err("%s: unable to configure DVI_LDO_EN\n", - __func__); + + beagle_config.dvi_pd_gpio = gpio + 2; + } else { /* * REVISIT: need ehci-omap hooks for external VBUS @@ -287,7 +285,7 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } - dvi_panel.power_down_gpio = beagle_config.reset_gpio; + dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, "nEN_USB_PWR"); @@ -499,7 +497,7 @@ static void __init omap3_beagle_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); - if (beagle_config.mmc1_gpio_wp != -EINVAL) + if (gpio_is_valid(beagle_config.mmc1_gpio_wp)) omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); mmc[0].caps = beagle_config.mmc_caps; omap_hsmmc_init(mmc); @@ -510,15 +508,13 @@ static void __init omap3_beagle_init(void) platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); + if (gpio_is_valid(beagle_config.dvi_pd_gpio)) + omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT); omap_display_init(&beagle_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); - usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 8fa2fc3a4c3c..779734d8ba37 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -494,8 +494,8 @@ static void __init overo_init(void) regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_hsmmc_init(mmc); overo_i2c_init(); + omap_hsmmc_init(mmc); omap_display_init(&overo_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ff53deccecab..df2534de3361 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -144,7 +144,6 @@ static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { .release_resources = lis302_release, .st_min_limits = {-32, 3, 3}, .st_max_limits = {-3, 32, 32}, - .irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO), }; #endif @@ -1030,7 +1029,6 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { { I2C_BOARD_INFO("lis3lv02d", 0x1d), .platform_data = &rx51_lis3lv02d_data, - .irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO), }, #endif }; @@ -1056,6 +1054,10 @@ static int __init rx51_i2c_init(void) omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) + rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO); + rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO); +#endif omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); return 0; diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 4e1a3b0e8cc8..1efdec236ae8 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3514,7 +3514,7 @@ int __init omap3xxx_clk_init(void) struct omap_clk *c; u32 cpu_clkflg = 0; - if (cpu_is_omap3517()) { + if (soc_is_am35xx()) { cpu_mask = RATE_IN_34XX; cpu_clkflg = CK_AM35XX; } else if (cpu_is_omap3630()) { diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 2172f6603848..ba6f9a0a43e9 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -84,6 +84,7 @@ static struct clk slimbus_clk = { static struct clk sys_32k_ck = { .name = "sys_32k_ck", + .clkdm_name = "prm_clkdm", .rate = 32768, .ops = &clkops_null, }; @@ -512,6 +513,7 @@ static struct clk ddrphy_ck = { .name = "ddrphy_ck", .parent = &dpll_core_m2_ck, .ops = &clkops_null, + .clkdm_name = "l3_emif_clkdm", .fixed_div = 2, .recalc = &omap_fixed_divisor_recalc, }; @@ -769,6 +771,7 @@ static const struct clksel dpll_mpu_m2_div[] = { static struct clk dpll_mpu_m2_ck = { .name = "dpll_mpu_m2_ck", .parent = &dpll_mpu_ck, + .clkdm_name = "cm_clkdm", .clksel = dpll_mpu_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, @@ -1149,6 +1152,7 @@ static const struct clksel l3_div_div[] = { static struct clk l3_div_ck = { .name = "l3_div_ck", .parent = &div_core_ck, + .clkdm_name = "cm_clkdm", .clksel = l3_div_div, .clksel_reg = OMAP4430_CM_CLKSEL_CORE, .clksel_mask = OMAP4430_CLKSEL_L3_MASK, @@ -2824,6 +2828,7 @@ static const struct clksel trace_clk_div_div[] = { static struct clk trace_clk_div_ck = { .name = "trace_clk_div_ck", .parent = &pmd_trace_clk_mux_ck, + .clkdm_name = "emu_sys_clkdm", .clksel = trace_clk_div_div, .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, .clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK, @@ -3412,9 +3417,12 @@ int __init omap4xxx_clk_init(void) if (cpu_is_omap443x()) { cpu_mask = RATE_IN_4430; cpu_clkflg = CK_443X; - } else if (cpu_is_omap446x()) { + } else if (cpu_is_omap446x() || cpu_is_omap447x()) { cpu_mask = RATE_IN_4460 | RATE_IN_4430; cpu_clkflg = CK_446X | CK_443X; + + if (cpu_is_omap447x()) + pr_warn("WARNING: OMAP4470 clock data incomplete!\n"); } else { return 0; } diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index f7b58609bad8..6227e9505c2d 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -31,12 +31,16 @@ * * CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this * clockdomain. (Currently, this applies to OMAP3 clockdomains only.) + * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is + * active whenever the MPU is active. True for interconnects and + * the WKUP clockdomains. */ #define CLKDM_CAN_FORCE_SLEEP (1 << 0) #define CLKDM_CAN_FORCE_WAKEUP (1 << 1) #define CLKDM_CAN_ENABLE_AUTO (1 << 2) #define CLKDM_CAN_DISABLE_AUTO (1 << 3) #define CLKDM_NO_AUTODEPS (1 << 4) +#define CLKDM_ACTIVE_WITH_MPU (1 << 5) #define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO) #define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP) diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c index 839145e1cfbe..4972219653ce 100644 --- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c @@ -88,4 +88,5 @@ struct clockdomain wkup_common_clkdm = { .name = "wkup_clkdm", .pwrdm = { .name = "wkup_pwrdm" }, .dep_bit = OMAP_EN_WKUP_SHIFT, + .flags = CLKDM_ACTIVE_WITH_MPU, }; diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index c53425847493..7f2133abe7d3 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -381,7 +381,7 @@ static struct clockdomain l4_wkup_44xx_clkdm = { .cm_inst = OMAP4430_PRM_WKUP_CM_INST, .clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS, .dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT, - .flags = CLKDM_CAN_HWSUP, + .flags = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU, }; static struct clockdomain emu_sys_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index a7bc096bd407..f24e3f7a2bbc 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -22,4 +22,15 @@ */ #define MAX_MODULE_READY_TIME 2000 +/* + * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for + * the PRCM to request that a module enter the inactive state in the + * case of OMAP2 & 3. In the case of OMAP4 this is the max duration + * in microseconds for the module to reach the inactive state from + * a functional state. + * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during + * kernel init. + */ +#define MAX_MODULE_DISABLE_TIME 5000 + #endif diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 8c86d294b1a3..1a39945d9ff8 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -313,9 +313,9 @@ int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_off omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) == CLKCTRL_IDLEST_DISABLED), - MAX_MODULE_READY_TIME, i); + MAX_MODULE_DISABLE_TIME, i); - return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; + return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY; } /** diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 54d49ddb9b81..5fb47a14f4ba 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -271,9 +271,9 @@ static struct platform_device *create_simple_dss_pdev(const char *pdev_name, goto err; } - r = omap_device_register(pdev); + r = platform_device_add(pdev); if (r) { - pr_err("Could not register omap_device for %s\n", pdev_name); + pr_err("Could not register platform_device for %s\n", pdev_name); goto err; } diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index 845309f146fe..88ffa1e645cd 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -20,6 +20,9 @@ #include #include + +#include + #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #ifdef CONFIG_BRIDGE_DVFS diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 0389b3264abe..00486a8564fd 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -246,6 +246,17 @@ void __init omap3xxx_check_features(void) omap_features |= OMAP3_HAS_SDRC; + /* + * am35x fixups: + * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as + * reserved and therefore return 0 when read. Unfortunately, + * OMAP3_CHECK_FEATURE() will interpret some of those zeroes to + * mean that a feature is present even though it isn't so clear + * the incorrectly set feature bits. + */ + if (soc_is_am35xx()) + omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP); + /* * TODO: Get additional info (where applicable) * e.g. Size of L2 cache. diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index fdc4303be563..6038a8c84b74 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -149,6 +149,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) ct->chip.irq_ack = omap_mask_ack_irq; ct->chip.irq_mask = irq_gc_mask_disable_reg; ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE; ct->regs.enable = INTC_MIR_CLEAR0; ct->regs.disable = INTC_MIR_SET0; diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 80e55c5c9998..9fe6829f4c16 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -41,6 +41,7 @@ #include "control.h" #include "mux.h" #include "prm.h" +#include "common.h" #define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ #define OMAP_MUX_BASE_SZ 0x5ca @@ -217,8 +218,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int __init -omap_mux_get_by_name(const char *muxname, +int __init omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) { diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 69fe060a0b75..471e62a74a16 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -59,6 +59,7 @@ #define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN #define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) +#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0) /* Flags for omapX_mux_init */ #define OMAP_PACKAGE_MASK 0xffff @@ -225,8 +226,18 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads); */ void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state); +int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux); #else +static inline int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux) +{ + return 0; +} + static inline int omap_mux_init_gpio(int gpio, int val) { return 0; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index bf86f7e8f91f..2d710f50fca2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -530,7 +530,7 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) _set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v); if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) - _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v); + _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v); /* XXX test pwrdm_get_wken for this hwmod's subsystem */ @@ -1124,15 +1124,18 @@ static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG * @oh: struct omap_hwmod * * - * If module is marked as SWSUP_SIDLE, force the module out of slave - * idle; otherwise, configure it for smart-idle. If module is marked - * as SWSUP_MSUSPEND, force the module out of master standby; - * otherwise, configure it for smart-standby. No return value. + * Ensure that the OCP_SYSCONFIG register for the IP block represented + * by @oh is set to indicate to the PRCM that the IP block is active. + * Usually this means placing the module into smart-idle mode and + * smart-standby, but if there is a bug in the automatic idle handling + * for the IP block, it may need to be placed into the force-idle or + * no-idle variants of these modes. No return value. */ static void _enable_sysc(struct omap_hwmod *oh) { u8 idlemode, sf; u32 v; + bool clkdm_act; if (!oh->class->sysc) return; @@ -1141,8 +1144,16 @@ static void _enable_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + clkdm_act = ((oh->clkdm && + oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) || + (oh->_clk && oh->_clk->clkdm && + oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU)); + if (clkdm_act && !(oh->class->sysc->idlemodes & + (SIDLE_SMART | SIDLE_SMART_WKUP))) + idlemode = HWMOD_IDLEMODE_FORCE; + else + idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? + HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; _set_slave_idlemode(oh, idlemode, &v); } @@ -1208,8 +1219,13 @@ static void _idle_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART; + /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */ + if (oh->flags & HWMOD_SWSUP_SIDLE || + !(oh->class->sysc->idlemodes & + (SIDLE_SMART | SIDLE_SMART_WKUP))) + idlemode = HWMOD_IDLEMODE_FORCE; + else + idlemode = HWMOD_IDLEMODE_SMART; _set_slave_idlemode(oh, idlemode, &v); } diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 950454a3fa31..b7bcba5221ba 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -393,8 +393,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_counter_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0004, .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO), .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -854,6 +853,11 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { .name = "dss_hdmi", .class = &omap44xx_hdmi_hwmod_class, .clkdm_name = "l3_dss_clkdm", + /* + * HDMI audio requires to use no-idle mode. Hence, + * set idle mode by software. + */ + .flags = HWMOD_SWSUP_SIDLE, .mpu_irqs = omap44xx_dss_hdmi_irqs, .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, .main_clk = "dss_48mhz_clk", @@ -1924,7 +1928,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp1_hwmod = { @@ -1959,7 +1963,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp2_hwmod = { @@ -1994,7 +1998,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp3_hwmod = { @@ -2029,7 +2033,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp4_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp4_hwmod = { @@ -3860,7 +3864,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = { }; /* usb_host_fs -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_usb_host_fs__l3_main_2 = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = { .master = &omap44xx_usb_host_fs_hwmod, .slave = &omap44xx_l3_main_2_hwmod, .clk = "l3_div_ck", @@ -3918,7 +3922,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = { }; /* aess -> l4_abe */ -static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = { .master = &omap44xx_aess_hwmod, .slave = &omap44xx_l4_abe_hwmod, .clk = "ocp_abe_iclk", @@ -4009,7 +4013,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = { }; /* l4_abe -> aess */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_aess_hwmod, .clk = "ocp_abe_iclk", @@ -4027,7 +4031,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = { }; /* l4_abe -> aess (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_aess_hwmod, .clk = "ocp_abe_iclk", @@ -5853,7 +5857,7 @@ static struct omap_hwmod_addr_space omap44xx_usb_host_fs_addrs[] = { }; /* l4_cfg -> usb_host_fs */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_fs = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = { .master = &omap44xx_l4_cfg_hwmod, .slave = &omap44xx_usb_host_fs_hwmod, .clk = "l4_div_ck", @@ -6010,13 +6014,13 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_iva__l3_main_2, &omap44xx_l3_main_1__l3_main_2, &omap44xx_l4_cfg__l3_main_2, - &omap44xx_usb_host_fs__l3_main_2, + /* &omap44xx_usb_host_fs__l3_main_2, */ &omap44xx_usb_host_hs__l3_main_2, &omap44xx_usb_otg_hs__l3_main_2, &omap44xx_l3_main_1__l3_main_3, &omap44xx_l3_main_2__l3_main_3, &omap44xx_l4_cfg__l3_main_3, - &omap44xx_aess__l4_abe, + /* &omap44xx_aess__l4_abe, */ &omap44xx_dsp__l4_abe, &omap44xx_l3_main_1__l4_abe, &omap44xx_mpu__l4_abe, @@ -6025,8 +6029,8 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_cfg__l4_wkup, &omap44xx_mpu__mpu_private, &omap44xx_l4_cfg__ocp_wp_noc, - &omap44xx_l4_abe__aess, - &omap44xx_l4_abe__aess_dma, + /* &omap44xx_l4_abe__aess, */ + /* &omap44xx_l4_abe__aess_dma, */ &omap44xx_l3_main_2__c2c, &omap44xx_l4_wkup__counter_32k, &omap44xx_l4_cfg__ctrl_module_core, @@ -6132,7 +6136,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__uart2, &omap44xx_l4_per__uart3, &omap44xx_l4_per__uart4, - &omap44xx_l4_cfg__usb_host_fs, + /* &omap44xx_l4_cfg__usb_host_fs, */ &omap44xx_l4_cfg__usb_host_hs, &omap44xx_l4_cfg__usb_otg_hs, &omap44xx_l4_cfg__usb_tll_hs, diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index a05a62f9ee5b..acc216491b8a 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -155,10 +155,11 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, u8 multi = error & L3_ERROR_LOG_MULTI; u32 address = omap3_l3_decode_addr(error_addr); - WARN(true, "%s seen by %s %s at address %x\n", + pr_err("%s seen by %s %s at address %x\n", omap3_l3_code_string(code), omap3_l3_initiator_string(initid), multi ? "Multiple Errors" : "", address); + WARN_ON(1); return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 4c90477e6f82..d52651a05daa 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -239,21 +239,15 @@ void am35x_set_mode(u8 musb_mode) devconf2 &= ~CONF2_OTGMODE; switch (musb_mode) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD case MUSB_HOST: /* Force VBUS valid, ID = 0 */ devconf2 |= CONF2_FORCE_HOST; break; -#endif -#ifdef CONFIG_USB_GADGET_MUSB_HDRC case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */ devconf2 |= CONF2_FORCE_DEVICE; break; -#endif -#ifdef CONFIG_USB_MUSB_OTG case MUSB_OTG: /* Don't override the VBUS/ID comparators */ devconf2 |= CONF2_NO_OVERRIDE; break; -#endif default: pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode); } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index a34023d0ca7c..3a595e899724 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -724,6 +724,7 @@ int __init omap3_pm_init(void) ret = request_irq(omap_prcm_event_to_irq("io"), _prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io", omap3_pm_init); + enable_irq(omap_prcm_event_to_irq("io")); if (ret) { pr_err("pm: Failed to request pm_io irq\n"); diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 9ce765407ad5..21cb74003a56 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -15,6 +15,7 @@ #include #include #include +#include #include "common.h" #include @@ -303,8 +304,15 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask) static int __init omap3xxx_prcm_init(void) { - if (cpu_is_omap34xx()) - return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); - return 0; + int ret = 0; + + if (cpu_is_omap34xx()) { + ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); + if (!ret) + irq_set_status_flags(omap_prcm_event_to_irq("io"), + IRQ_NOAUTOEN); + } + + return ret; } subsys_initcall(omap3xxx_prcm_init); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 292d4aaca068..c1b93c752d70 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -57,6 +57,7 @@ struct omap_uart_state { struct list_head node; struct omap_hwmod *oh; + struct omap_device_pad default_omap_uart_pads[2]; }; static LIST_HEAD(uart_list); @@ -126,11 +127,70 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static void omap_serial_fill_default_pads(struct omap_board_data *bdata) + +#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28 +static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN], + tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata; + +static void __init +omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata, + struct omap_uart_state *uart) { + uart->default_omap_uart_pads[0].name = rx_pad_name; + uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX | + OMAP_DEVICE_PAD_WAKEUP; + uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT | + OMAP_MUX_MODE0; + uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0; + uart->default_omap_uart_pads[1].name = tx_pad_name; + uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT | + OMAP_MUX_MODE0; + bdata->pads = uart->default_omap_uart_pads; + bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads); +} + +static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, + struct omap_uart_state *uart) +{ + struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL; + struct omap_mux *rx_mux = NULL, *tx_mux = NULL; + char *rx_fmt, *tx_fmt; + int uart_nr = bdata->id + 1; + + if (bdata->id != 2) { + rx_fmt = "uart%d_rx.uart%d_rx"; + tx_fmt = "uart%d_tx.uart%d_tx"; + } else { + rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx"; + tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx"; + } + + snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt, + uart_nr, uart_nr); + snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt, + uart_nr, uart_nr); + + if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 && + omap_mux_get_by_name + (tx_pad_name, &tx_partition, &tx_mux) >= 0) { + u16 tx_mode, rx_mode; + + tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset); + rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset); + + /* + * Check if uart is used in default tx/rx mode i.e. in mux mode0 + * if yes then configure rx pin for wake up capability + */ + if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode)) + omap_serial_fill_uart_tx_rx_pads(bdata, uart); + } } #else -static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} +static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, + struct omap_uart_state *uart) +{ +} #endif static char *cmdline_find_option(char *str) @@ -287,8 +347,7 @@ void __init omap_serial_board_init(struct omap_uart_port_info *info) bdata.pads = NULL; bdata.pads_cnt = 0; - if (cpu_is_omap44xx() || cpu_is_omap34xx()) - omap_serial_fill_default_pads(&bdata); + omap_serial_check_wakeup(&bdata, uart); if (!info) omap_serial_init_port(&bdata, NULL); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 119d5a910f3a..43a979075338 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -32,6 +32,7 @@ #include "twl-common.h" #include "pm.h" #include "voltage.h" +#include "mux.h" static struct i2c_board_info __initdata pmic_i2c_board_info = { .addr = 0x48, @@ -77,6 +78,7 @@ void __init omap4_pmic_init(const char *pmic_type, struct twl6040_platform_data *twl6040_data, int twl6040_irq) { /* PMIC part*/ + omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(omap4_i2c1_board_info[0].type, pmic_type, sizeof(omap4_i2c1_board_info[0].type)); omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index b19d1b43c12e..c4a576856661 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -41,12 +41,10 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data musb_plat = { -#ifdef CONFIG_USB_MUSB_OTG +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_HDRC_HCD) +#else .mode = MUSB_HOST, -#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) - .mode = MUSB_PERIPHERAL, #endif /* .clock is set dynamically */ .config = &musb_config, diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index db84a46ce7fd..805bea6edf17 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -300,7 +300,7 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, printk(error, 3, status); return status; } - tusb_resources[2].start = irq + IH_GPIO_BASE; + tusb_resources[2].start = gpio_to_irq(irq); /* set up memory timings ... can speed them up later */ if (!ps_refclk) { diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h index 96484bcd34ca..11a3c1e9801f 100644 --- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -35,5 +35,5 @@ #define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204) #define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) - +#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300) #endif diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h new file mode 100644 index 000000000000..1aa5d0a50a0b --- /dev/null +++ b/arch/arm/mach-orion5x/include/mach/io.h @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-orion5x/include/mach/io.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include +#include + +#define IO_SPACE_LIMIT SZ_2M +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE); +} + +#define __io(a) __io(a) +#endif diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 2745f5d95b3f..683e085ce162 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -82,6 +82,7 @@ #define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) #define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) +#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000) #define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index d09da6a746b8..d3de84b0dcbe 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -127,7 +127,11 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO19_SSP2_SCLK, GPIO86_SSP2_RXD, GPIO87_SSP2_TXD, - GPIO88_GPIO, + GPIO88_GPIO | MFP_LPM_DRIVE_HIGH, /* TSC2046_CS */ + + /* BQ24022 Regulator */ + GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_nCHARGE_EN */ + GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_ISET2 */ /* HX4700 specific input GPIOs */ GPIO12_GPIO | WAKEUP_ON_EDGE_RISE, /* ASIC3_IRQ */ @@ -135,6 +139,10 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO14_GPIO, /* nWLAN_IRQ */ /* HX4700 specific output GPIOs */ + GPIO61_GPIO | MFP_LPM_DRIVE_HIGH, /* W3220_nRESET */ + GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* ASIC3_nRESET */ + GPIO81_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_GP_nRESET */ + GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_HW_nRESET */ GPIO102_GPIO | MFP_LPM_DRIVE_LOW, /* SYNAPTICS_POWER_ON */ GPIO10_GPIO, /* GSM_IRQ */ @@ -872,14 +880,19 @@ static struct gpio global_gpios[] = { { GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" }, { GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" }, { GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" }, + { GPIO61_HX4700_W3220_nRESET, GPIOF_OUT_INIT_HIGH, "W3220_nRESET" }, { GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" }, + { GPIO81_HX4700_CPU_GP_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" }, { GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" }, + { GPIO116_HX4700_CPU_HW_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" }, }; static void __init hx4700_init(void) { int ret; + PCFR = PCFR_GPR_EN | PCFR_OPDE; + pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config)); gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1); ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios)); diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 414364eb426c..cb2883d553b5 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -106,7 +106,7 @@ static struct clk s3c2440_clk_cam_upll = { static struct clk s3c2440_clk_ac97 = { .name = "ac97", .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, + .ctrlbit = S3C2440_CLKCON_AC97, }; static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 9e37026ef9dd..9bd135531d76 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -779,6 +779,7 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") .init_irq = r8a7740_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = eva_init, + .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = eva_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index 7bc5e7d39f9b..6a33cf393428 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -80,6 +80,7 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d") .init_irq = emev2_init_irq, .handle_irq = gic_handle_irq, .init_machine = kzm9d_add_standard_devices, + .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = kzm9d_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index d8e33b682832..c0ae815e7beb 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -455,6 +455,7 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g") .init_irq = sh73a0_init_irq, .handle_irq = gic_handle_irq, .init_machine = kzm_init, + .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = kzm9g_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index b577f7c44678..150122a44630 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1512,6 +1512,9 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); + /* SDHI0 PORT172 card-detect IRQ26 */ + gpio_request(GPIO_FN_IRQ26_172, NULL); + #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* enable SDHI1 */ gpio_request(GPIO_FN_SDHICMD1, NULL); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 472d1f5361e5..3946c4ba2aa8 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -475,9 +475,9 @@ static struct clk *late_main_clks[] = { enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, - MSTP219, + MSTP219, MSTP218, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP331, MSTP329, MSTP325, MSTP323, MSTP318, + MSTP331, MSTP329, MSTP325, MSTP323, MSTP314, MSTP313, MSTP312, MSTP311, MSTP303, MSTP302, MSTP301, MSTP300, MSTP411, MSTP410, MSTP403, @@ -497,6 +497,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */ [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */ [MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */ + [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ @@ -508,7 +509,6 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */ [MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */ - [MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */ [MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */ [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ @@ -552,6 +552,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */ + CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ @@ -563,7 +564,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */ - CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c index 550b23df4fd4..f04fad4ec4fb 100644 --- a/arch/arm/mach-shmobile/intc-r8a7779.c +++ b/arch/arm/mach-shmobile/intc-r8a7779.c @@ -35,6 +35,9 @@ #define INT2SMSKCR3 0xfe7822ac #define INT2SMSKCR4 0xfe7822b0 +#define INT2NTSR0 0xfe700060 +#define INT2NTSR1 0xfe700064 + static int r8a7779_set_wake(struct irq_data *data, unsigned int on) { return 0; /* always allow wakeup */ @@ -49,6 +52,10 @@ void __init r8a7779_init_irq(void) gic_init(0, 29, gic_dist_base, gic_cpu_base); gic_arch_extn.irq_set_wake = r8a7779_set_wake; + /* route all interrupts to ARM */ + __raw_writel(0xffffffff, INT2NTSR0); + __raw_writel(0x3fffffff, INT2NTSR1); + /* unmask all known interrupts in INTCS2 */ __raw_writel(0xfffffff0, INT2SMSKCR0); __raw_writel(0xfff7ffff, INT2SMSKCR1); diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index bacdd667e3b1..fde0d23121dc 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -22,10 +22,20 @@ #include #include +#ifdef CONFIG_ARCH_SH73A0 #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \ of_machine_is_compatible("renesas,sh73a0")) +#else +#define is_sh73a0() (0) +#endif + #define is_r8a7779() machine_is_marzen() + +#ifdef CONFIG_ARCH_EMEV2 #define is_emev2() of_machine_is_compatible("renesas,emev2") +#else +#define is_emev2() (0) +#endif static unsigned int __init shmobile_smp_get_core_count(void) { diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 6a4bd582c028..fafce9ce8218 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -484,7 +484,7 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = { }, }; -#define SH7372_CHCLR 0x220 +#define SH7372_CHCLR (0x220 - 0x20) static const struct sh_dmae_channel sh7372_dmae_channels[] = { { diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S index ea1564609bd4..9e3ae6bfe50d 100644 --- a/arch/arm/mach-spear13xx/include/mach/debug-macro.S +++ b/arch/arm/mach-spear13xx/include/mach/debug-macro.S @@ -4,7 +4,7 @@ * Debugging macro include header spear13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h index 383ab04dc6c9..d50bdb605925 100644 --- a/arch/arm/mach-spear13xx/include/mach/dma.h +++ b/arch/arm/mach-spear13xx/include/mach/dma.h @@ -4,7 +4,7 @@ * DMA information for SPEAr13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h index 6d8c45b9f298..dac57fd0cdfd 100644 --- a/arch/arm/mach-spear13xx/include/mach/generic.h +++ b/arch/arm/mach-spear13xx/include/mach/generic.h @@ -4,7 +4,7 @@ * spear13xx machine family generic header file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h index cd6f4f86a56b..85f176311f63 100644 --- a/arch/arm/mach-spear13xx/include/mach/gpio.h +++ b/arch/arm/mach-spear13xx/include/mach/gpio.h @@ -4,7 +4,7 @@ * GPIO macros for SPEAr13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h index f542a24aa5f2..271a62b4cd31 100644 --- a/arch/arm/mach-spear13xx/include/mach/irqs.h +++ b/arch/arm/mach-spear13xx/include/mach/irqs.h @@ -4,7 +4,7 @@ * IRQ helper macros for spear13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h index 30c57ef72686..65f27def239b 100644 --- a/arch/arm/mach-spear13xx/include/mach/spear.h +++ b/arch/arm/mach-spear13xx/include/mach/spear.h @@ -4,7 +4,7 @@ * spear13xx Machine family specific definition * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h index 31af3e8d976e..3a58b8284a6a 100644 --- a/arch/arm/mach-spear13xx/include/mach/timex.h +++ b/arch/arm/mach-spear13xx/include/mach/timex.h @@ -4,7 +4,7 @@ * SPEAr3XX machine family specific timex definitions * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h index c7840896ae6e..70fe72f05dea 100644 --- a/arch/arm/mach-spear13xx/include/mach/uncompress.h +++ b/arch/arm/mach-spear13xx/include/mach/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c index fefd15b2f380..732d29bc7330 100644 --- a/arch/arm/mach-spear13xx/spear1310.c +++ b/arch/arm/mach-spear13xx/spear1310.c @@ -4,7 +4,7 @@ * SPEAr1310 machine source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c index ee38cbc56869..81e4ed76ad06 100644 --- a/arch/arm/mach-spear13xx/spear1340.c +++ b/arch/arm/mach-spear13xx/spear1340.c @@ -4,7 +4,7 @@ * SPEAr1340 machine source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c index 50b349ae863d..cf936b106e27 100644 --- a/arch/arm/mach-spear13xx/spear13xx.c +++ b/arch/arm/mach-spear13xx/spear13xx.c @@ -4,7 +4,7 @@ * SPEAr13XX machines common source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S index 590519f10d6e..0a6381fad5d9 100644 --- a/arch/arm/mach-spear3xx/include/mach/debug-macro.S +++ b/arch/arm/mach-spear3xx/include/mach/debug-macro.S @@ -4,7 +4,7 @@ * Debugging macro include header spear3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index 4a95b9453c2a..ce19113ca791 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -4,7 +4,7 @@ * SPEAr3XX machine family generic header file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/gpio.h b/arch/arm/mach-spear3xx/include/mach/gpio.h index 451b2081bfc9..2ac74c6db7f1 100644 --- a/arch/arm/mach-spear3xx/include/mach/gpio.h +++ b/arch/arm/mach-spear3xx/include/mach/gpio.h @@ -4,7 +4,7 @@ * GPIO macros for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h index 51bd62a0254c..803de76f5f36 100644 --- a/arch/arm/mach-spear3xx/include/mach/irqs.h +++ b/arch/arm/mach-spear3xx/include/mach/irqs.h @@ -4,7 +4,7 @@ * IRQ helper macros for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h index 18e2ac576f25..6309bf68d6f8 100644 --- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h @@ -4,7 +4,7 @@ * Miscellaneous registers definitions for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h index 51eb953148a9..8cca95193d4d 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -4,7 +4,7 @@ * SPEAr3xx Machine family specific definition * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h index a38cc9de876f..9f5d08bd0c44 100644 --- a/arch/arm/mach-spear3xx/include/mach/timex.h +++ b/arch/arm/mach-spear3xx/include/mach/timex.h @@ -4,7 +4,7 @@ * SPEAr3XX machine family specific timex definitions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h index 53ba8bbc0dfa..b909b011f7c8 100644 --- a/arch/arm/mach-spear3xx/include/mach/uncompress.h +++ b/arch/arm/mach-spear3xx/include/mach/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index f74a05bdb829..0f882ecb7d81 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -4,7 +4,7 @@ * SPEAr300 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index 84dfb0900747..bbcf4571d361 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -4,7 +4,7 @@ * SPEAr310 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index a88fa841d29d..88d483bcd66a 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -4,7 +4,7 @@ * SPEAr320 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index f22419ed74a8..66db5f13af84 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -4,7 +4,7 @@ * SPEAr3XX machines common source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -87,7 +87,7 @@ void __init spear3xx_map_io(void) static void __init spear3xx_timer_init(void) { - char pclk_name[] = "pll3_48m_clk"; + char pclk_name[] = "pll3_clk"; struct clk *gpt_clk, *pclk; spear3xx_clk_init(); diff --git a/arch/arm/mach-spear6xx/include/mach/gpio.h b/arch/arm/mach-spear6xx/include/mach/gpio.h index 3a789dbb69f7..d42cefc0356d 100644 --- a/arch/arm/mach-spear6xx/include/mach/gpio.h +++ b/arch/arm/mach-spear6xx/include/mach/gpio.h @@ -4,7 +4,7 @@ * GPIO macros for SPEAr6xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h index 179e45774b3a..c34acc201d34 100644 --- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h @@ -4,7 +4,7 @@ * Miscellaneous registers definitions for SPEAr6xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 2e2e3596583e..9af67d003c62 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -423,7 +423,7 @@ void __init spear6xx_map_io(void) static void __init spear6xx_timer_init(void) { - char pclk_name[] = "pll3_48m_clk"; + char pclk_name[] = "pll3_clk"; struct clk *gpt_clk, *pclk; spear6xx_clk_init(); diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 4d6a2ee99c3b..5beb7ebe2948 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -33,7 +33,7 @@ static bool is_enabled; -static void tegra_cpu_reset_handler_enable(void) +static void __init tegra_cpu_reset_handler_enable(void) { void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE); void __iomem *evp_cpu_reset = diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 9c74ac545849..4fd93f5c49ec 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -580,43 +580,12 @@ static void ux500_uart0_reset(void) udelay(1); } -/* This needs to be referenced by callbacks */ -struct pinctrl *u0_p; -struct pinctrl_state *u0_def; -struct pinctrl_state *u0_sleep; - -static void ux500_uart0_init(void) -{ - int ret; - - if (IS_ERR(u0_p) || IS_ERR(u0_def)) - return; - - ret = pinctrl_select_state(u0_p, u0_def); - if (ret) - pr_err("could not set UART0 defstate\n"); -} - -static void ux500_uart0_exit(void) -{ - int ret; - - if (IS_ERR(u0_p) || IS_ERR(u0_sleep)) - return; - - ret = pinctrl_select_state(u0_p, u0_sleep); - if (ret) - pr_err("could not set UART0 idlestate\n"); -} - static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif - .init = ux500_uart0_init, - .exit = ux500_uart0_exit, .reset = ux500_uart0_reset, }; @@ -638,28 +607,7 @@ static struct amba_pl011_data uart2_plat = { static void __init mop500_uart_init(struct device *parent) { - struct amba_device *uart0_device; - - uart0_device = db8500_add_uart0(parent, &uart0_plat); - if (uart0_device) { - u0_p = pinctrl_get(&uart0_device->dev); - if (IS_ERR(u0_p)) - dev_err(&uart0_device->dev, - "could not get UART0 pinctrl\n"); - else { - u0_def = pinctrl_lookup_state(u0_p, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(u0_def)) { - dev_err(&uart0_device->dev, - "could not get UART0 defstate\n"); - } - u0_sleep = pinctrl_lookup_state(u0_p, - PINCTRL_STATE_SLEEP); - if (IS_ERR(u0_sleep)) - dev_err(&uart0_device->dev, - "could not get UART0 idlestate\n"); - } - } + db8500_add_uart0(parent, &uart0_plat); db8500_add_uart1(parent, &uart1_plat); db8500_add_uart2(parent, &uart2_plat); } @@ -677,11 +625,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &ab8500_device, }; -static struct platform_device *snowball_of_platform_devs[] __initdata = { - &snowball_led_dev, - &snowball_key_dev, -}; - static void __init mop500_init_machine(void) { struct device *parent = NULL; @@ -821,6 +764,11 @@ MACHINE_END #ifdef CONFIG_MACH_UX500_DT +static struct platform_device *snowball_of_platform_devs[] __initdata = { + &snowball_led_dev, + &snowball_key_dev, +}; + struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires DMA and call-back bindings. */ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), @@ -838,6 +786,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL), OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL), OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL), + /* Requires device name bindings. */ + OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL), {}, }; diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index 741e71feca78..66e7f00884ab 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -63,8 +63,10 @@ static void __init ux500_timer_init(void) /* TODO: Once MTU has been DT:ed place code above into else. */ if (of_have_populated_dt()) { +#ifdef CONFIG_OF np = of_find_matching_node(NULL, prcmu_timer_of_match); if (!np) +#endif goto dt_fail; tmp_base = of_iomap(np, 0); diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index cf4687ee2a7b..cd8ea3588f93 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -169,26 +169,13 @@ static struct map_desc versatile_io_desc[] __initdata = { .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE), .length = VERSATILE_PCI_CFG_BASE_SIZE, .type = MT_DEVICE - }, -#if 0 - { - .virtual = VERSATILE_PCI_VIRT_MEM_BASE0, + }, { + .virtual = (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0, .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0), - .length = SZ_16M, - .type = MT_DEVICE - }, { - .virtual = VERSATILE_PCI_VIRT_MEM_BASE1, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1), - .length = SZ_16M, - .type = MT_DEVICE - }, { - .virtual = VERSATILE_PCI_VIRT_MEM_BASE2, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2), - .length = SZ_16M, + .length = IO_SPACE_LIMIT, .type = MT_DEVICE }, #endif -#endif }; void __init versatile_map_io(void) diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h index 4d4973dd8fba..408e58da46c6 100644 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ b/arch/arm/mach-versatile/include/mach/hardware.h @@ -29,8 +29,9 @@ */ #define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul #define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul +#define VERSATILE_PCI_VIRT_MEM_BASE0 (void __iomem *)PCIO_BASE -/* macro to get at IO space when running virtually */ +/* macro to get at MMIO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) #define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n)) diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h new file mode 100644 index 000000000000..0406513be7d8 --- /dev/null +++ b/arch/arm/mach-versatile/include/mach/io.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-versatile/include/mach/io.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define PCIO_BASE 0xeb000000ul + +#define __io(a) ((a) + PCIO_BASE) + +#endif diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 15c6a00000ec..e95bf84cc837 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -169,11 +169,18 @@ static struct pci_ops pci_versatile_ops = { .write = versatile_write_config, }; +static struct resource io_port = { + .name = "PCI", + .start = 0, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + static struct resource io_mem = { .name = "PCI I/O space", .start = VERSATILE_PCI_MEM_BASE0, .end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1, - .flags = IORESOURCE_IO, + .flags = IORESOURCE_MEM, }; static struct resource non_mem = { @@ -200,6 +207,12 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) "memory region (%d)\n", ret); goto out; } + ret = request_resource(&ioport_resource, &io_port); + if (ret) { + printk(KERN_ERR "PCI: unable to allocate I/O " + "port region (%d)\n", ret); + goto out; + } ret = request_resource(&iomem_resource, &non_mem); if (ret) { printk(KERN_ERR "PCI: unable to allocate non-prefetchable " @@ -218,7 +231,7 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset); + pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset); pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset); pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset); @@ -249,6 +262,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { sys->mem_offset = 0; + sys->io_offset = 0; ret = pci_versatile_setup_resources(sys); if (ret < 0) { printk("pci_versatile_setup: resources... oops?\n"); @@ -325,7 +339,6 @@ void __init pci_versatile_preinit(void) static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; - int devslot = PCI_SLOT(dev->devfn); /* slot, pin, irq * 24 1 27 diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 106c4c0ebccd..655878bcc96d 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -228,7 +228,7 @@ static pte_t **consistent_pte; #define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M -unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE; +static unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE; void __init init_consistent_dma_size(unsigned long size) { @@ -321,7 +321,7 @@ static struct arm_vmregion_head coherent_head = { .vm_list = LIST_HEAD_INIT(coherent_head.vm_list), }; -size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8; +static size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8; static int __init early_coherent_pool(char *p) { @@ -1067,7 +1067,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t return NULL; while (count) { - int j, order = __ffs(count); + int j, order = __fls(count); pages[i] = alloc_pages(gfp | __GFP_NOWARN, order); while (!pages[i] && order) @@ -1091,7 +1091,7 @@ error: while (--i) if (pages[i]) __free_pages(pages[i], 0); - if (array_size < PAGE_SIZE) + if (array_size <= PAGE_SIZE) kfree(pages); else vfree(pages); @@ -1106,7 +1106,7 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages, size_t s for (i = 0; i < count; i++) if (pages[i]) __free_pages(pages[i], 0); - if (array_size < PAGE_SIZE) + if (array_size <= PAGE_SIZE) kfree(pages); else vfree(pages); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index c21d06c7dd7e..f54d59219764 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -212,7 +212,7 @@ EXPORT_SYMBOL(arm_dma_zone_size); * allocations. This must be the smallest DMA mask in the system, * so a successful GFP_DMA allocation will always satisfy this. */ -u32 arm_dma_limit; +phys_addr_t arm_dma_limit; static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole, unsigned long dma_size) diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 93dc0c17cdcb..2e8a1efdf7b8 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -62,9 +62,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page #endif #ifdef CONFIG_ZONE_DMA -extern u32 arm_dma_limit; +extern phys_addr_t arm_dma_limit; #else -#define arm_dma_limit ((u32)~0) +#define arm_dma_limit ((phys_addr_t)~0) #endif extern phys_addr_t arm_lowmem_limit; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e5dad60b558b..cf4528d51774 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -791,6 +791,79 @@ void __init iotable_init(struct map_desc *io_desc, int nr) } } +#ifndef CONFIG_ARM_LPAE + +/* + * The Linux PMD is made of two consecutive section entries covering 2MB + * (see definition in include/asm/pgtable-2level.h). However a call to + * create_mapping() may optimize static mappings by using individual + * 1MB section mappings. This leaves the actual PMD potentially half + * initialized if the top or bottom section entry isn't used, leaving it + * open to problems if a subsequent ioremap() or vmalloc() tries to use + * the virtual space left free by that unused section entry. + * + * Let's avoid the issue by inserting dummy vm entries covering the unused + * PMD halves once the static mappings are in place. + */ + +static void __init pmd_empty_section_gap(unsigned long addr) +{ + struct vm_struct *vm; + + vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); + vm->addr = (void *)addr; + vm->size = SECTION_SIZE; + vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; + vm->caller = pmd_empty_section_gap; + vm_area_add_early(vm); +} + +static void __init fill_pmd_gaps(void) +{ + struct vm_struct *vm; + unsigned long addr, next = 0; + pmd_t *pmd; + + /* we're still single threaded hence no lock needed here */ + for (vm = vmlist; vm; vm = vm->next) { + if (!(vm->flags & VM_ARM_STATIC_MAPPING)) + continue; + addr = (unsigned long)vm->addr; + if (addr < next) + continue; + + /* + * Check if this vm starts on an odd section boundary. + * If so and the first section entry for this PMD is free + * then we block the corresponding virtual address. + */ + if ((addr & ~PMD_MASK) == SECTION_SIZE) { + pmd = pmd_off_k(addr); + if (pmd_none(*pmd)) + pmd_empty_section_gap(addr & PMD_MASK); + } + + /* + * Then check if this vm ends on an odd section boundary. + * If so and the second section entry for this PMD is empty + * then we block the corresponding virtual address. + */ + addr += vm->size; + if ((addr & ~PMD_MASK) == SECTION_SIZE) { + pmd = pmd_off_k(addr) + 1; + if (pmd_none(*pmd)) + pmd_empty_section_gap(addr); + } + + /* no need to look at any vm entry until we hit the next PMD */ + next = (addr + PMD_SIZE - 1) & PMD_MASK; + } +} + +#else +#define fill_pmd_gaps() do { } while (0) +#endif + static void * __initdata vmalloc_min = (void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET); @@ -1072,6 +1145,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) */ if (mdesc->map_io) mdesc->map_io(); + fill_pmd_gaps(); /* * Finally flush the caches and tlb to ensure that we're in a diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 62135849f48b..c641fb685017 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -762,6 +762,11 @@ b_epilogue: update_on_xread(ctx); emit(ARM_MOV_R(r_A, r_X), ctx); break; + case BPF_S_ANC_ALU_XOR_X: + /* A ^= X */ + update_on_xread(ctx); + emit(ARM_EOR_R(r_A, r_A, r_X), ctx); + break; case BPF_S_ANC_PROTOCOL: /* A = ntohs(skb->protocol) */ ctx->seen |= SEEN_SKB; diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h index 99ae5e3f46d2..7fa2f7d3cb90 100644 --- a/arch/arm/net/bpf_jit_32.h +++ b/arch/arm/net/bpf_jit_32.h @@ -68,6 +68,8 @@ #define ARM_INST_CMP_R 0x01500000 #define ARM_INST_CMP_I 0x03500000 +#define ARM_INST_EOR_R 0x00200000 + #define ARM_INST_LDRB_I 0x05d00000 #define ARM_INST_LDRB_R 0x07d00000 #define ARM_INST_LDRH_I 0x01d000b0 @@ -132,6 +134,8 @@ #define ARM_CMP_R(rn, rm) _AL3_R(ARM_INST_CMP, 0, rn, rm) #define ARM_CMP_I(rn, imm) _AL3_I(ARM_INST_CMP, 0, rn, imm) +#define ARM_EOR_R(rd, rn, rm) _AL3_R(ARM_INST_EOR, rd, rn, rm) + #define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \ | (off)) #define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \ diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c index 9129c9e7d532..88726f4dbbfa 100644 --- a/arch/arm/plat-mxc/epit.c +++ b/arch/arm/plat-mxc/epit.c @@ -50,6 +50,7 @@ #include #include #include +#include #include #include @@ -201,8 +202,16 @@ static int __init epit_clockevent_init(struct clk *timer_clk) return 0; } -void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq) +void __init epit_timer_init(void __iomem *base, int irq) { + struct clk *timer_clk; + + timer_clk = clk_get_sys("imx-epit.0", NULL); + if (IS_ERR(timer_clk)) { + pr_err("i.MX epit: unable to get clk\n"); + return; + } + clk_prepare_enable(timer_clk); timer_base = base; diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index cf663d84e7c1..e429ca1b814a 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -54,8 +54,8 @@ extern void imx50_soc_init(void); extern void imx51_soc_init(void); extern void imx53_soc_init(void); extern void imx51_init_late(void); -extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); -extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); +extern void epit_timer_init(void __iomem *base, int irq); +extern void mxc_timer_init(void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); extern int mx21_clocks_init(unsigned long lref, unsigned long fref); extern int mx25_clocks_init(void); diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h index 7ded6f1f74bc..3c080a32dbf5 100644 --- a/arch/arm/plat-mxc/include/mach/mx2_cam.h +++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h @@ -23,6 +23,7 @@ #ifndef __MACH_MX2_CAM_H_ #define __MACH_MX2_CAM_H_ +#define MX2_CAMERA_SWAP16 (1 << 0) #define MX2_CAMERA_EXT_VSYNC (1 << 1) #define MX2_CAMERA_CCIR (1 << 2) #define MX2_CAMERA_CCIR_INTERLACE (1 << 3) @@ -30,6 +31,7 @@ #define MX2_CAMERA_GATED_CLOCK (1 << 5) #define MX2_CAMERA_INV_DATA (1 << 6) #define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) +#define MX2_CAMERA_PACK_DIR_MSB (1 << 8) /** * struct mx2_camera_platform_data - optional platform data for mx2_camera diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 99f958ca6cb8..00e8e659e667 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -58,6 +58,7 @@ /* MX31, MX35, MX25, MX5 */ #define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */ #define V2_TCTL_CLK_IPG (1 << 6) +#define V2_TCTL_CLK_PER (2 << 6) #define V2_TCTL_FRR (1 << 9) #define V2_IR 0x0c #define V2_TSTAT 0x08 @@ -280,23 +281,22 @@ static int __init mxc_clockevent_init(struct clk *timer_clk) return 0; } -void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) +void __init mxc_timer_init(void __iomem *base, int irq) { uint32_t tctl_val; + struct clk *timer_clk; struct clk *timer_ipg_clk; - if (!timer_clk) { - timer_clk = clk_get_sys("imx-gpt.0", "per"); - if (IS_ERR(timer_clk)) { - pr_err("i.MX timer: unable to get clk\n"); - return; - } - - timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg"); - if (!IS_ERR(timer_ipg_clk)) - clk_prepare_enable(timer_ipg_clk); + timer_clk = clk_get_sys("imx-gpt.0", "per"); + if (IS_ERR(timer_clk)) { + pr_err("i.MX timer: unable to get clk\n"); + return; } + timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg"); + if (!IS_ERR(timer_ipg_clk)) + clk_prepare_enable(timer_ipg_clk); + clk_prepare_enable(timer_clk); timer_base = base; @@ -309,7 +309,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ if (timer_is_v2()) - tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; + tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; else tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 62ec5c452792..706b7e29397f 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -461,6 +461,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused) struct clk *c; struct clk *pa; + mutex_lock(&clocks_mutex); seq_printf(s, "%-30s %-30s %-10s %s\n", "clock-name", "parent-name", "rate", "use-count"); @@ -469,6 +470,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused) seq_printf(s, "%-30s %-30s %-10lu %d\n", c->name, pa ? pa->name : "none", c->rate, c->usecount); } + mutex_unlock(&clocks_mutex); return 0; } diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 297245dba66e..de6c0a08f461 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -252,8 +252,6 @@ IS_AM_SUBCLASS(335x, 0x335) * cpu_is_omap2423(): True for OMAP2423 * cpu_is_omap2430(): True for OMAP2430 * cpu_is_omap3430(): True for OMAP3430 - * cpu_is_omap3505(): True for OMAP3505 - * cpu_is_omap3517(): True for OMAP3517 */ #define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) @@ -277,8 +275,6 @@ IS_OMAP_TYPE(2422, 0x2422) IS_OMAP_TYPE(2423, 0x2423) IS_OMAP_TYPE(2430, 0x2430) IS_OMAP_TYPE(3430, 0x3430) -IS_OMAP_TYPE(3505, 0x3517) -IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap310() 0 #define cpu_is_omap730() 0 @@ -293,12 +289,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap2422() 0 #define cpu_is_omap2423() 0 #define cpu_is_omap2430() 0 -#define cpu_is_omap3503() 0 -#define cpu_is_omap3515() 0 -#define cpu_is_omap3525() 0 -#define cpu_is_omap3530() 0 -#define cpu_is_omap3505() 0 -#define cpu_is_omap3517() 0 #define cpu_is_omap3430() 0 #define cpu_is_omap3630() 0 @@ -350,12 +340,6 @@ IS_OMAP_TYPE(3517, 0x3517) #if defined(CONFIG_ARCH_OMAP3) # undef cpu_is_omap3430 -# undef cpu_is_omap3503 -# undef cpu_is_omap3515 -# undef cpu_is_omap3525 -# undef cpu_is_omap3530 -# undef cpu_is_omap3505 -# undef cpu_is_omap3517 # undef cpu_is_ti81xx # undef cpu_is_ti816x # undef cpu_is_ti814x @@ -363,19 +347,6 @@ IS_OMAP_TYPE(3517, 0x3517) # undef cpu_is_am33xx # undef cpu_is_am335x # define cpu_is_omap3430() is_omap3430() -# define cpu_is_omap3503() (cpu_is_omap3430() && \ - (!omap3_has_iva()) && \ - (!omap3_has_sgx())) -# define cpu_is_omap3515() (cpu_is_omap3430() && \ - (!omap3_has_iva()) && \ - (omap3_has_sgx())) -# define cpu_is_omap3525() (cpu_is_omap3430() && \ - (!omap3_has_sgx()) && \ - (omap3_has_iva())) -# define cpu_is_omap3530() (cpu_is_omap3430()) -# define cpu_is_omap3517() is_omap3517() -# define cpu_is_omap3505() (cpu_is_omap3517() && \ - !omap3_has_sgx()) # undef cpu_is_omap3630 # define cpu_is_omap3630() is_omap363x() # define cpu_is_ti81xx() is_ti81xx() @@ -424,10 +395,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) #define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) -#define OMAP3517_CLASS 0x35170034 -#define OMAP3517_REV_ES1_0 OMAP3517_CLASS -#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8)) - #define TI816X_CLASS 0x81600034 #define TI8168_REV_ES1_0 TI816X_CLASS #define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index a7754a886d42..5493bd95da5e 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -172,8 +172,7 @@ struct omap_mmc_platform_data { extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed); -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ - defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); @@ -185,7 +184,6 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) { } - #endif extern int omap_msdi_reset(struct omap_hwmod *oh); diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 61fd837624a8..c1793786aea9 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -582,7 +582,7 @@ void __init orion_spi_1_init(unsigned long mapbase) * Watchdog ****************************************************************************/ static struct resource orion_wdt_resource = - DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28); + DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28); static struct platform_device orion_wdt_device = { .name = "orion_wdt", diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index 58b79809d20c..584c9bf8ed2d 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c @@ -193,6 +193,7 @@ static const struct platform_device_id ssp_id_table[] = { { "pxa25x-nssp", PXA25x_NSSP }, { "pxa27x-ssp", PXA27x_SSP }, { "pxa168-ssp", PXA168_SSP }, + { "pxa910-ssp", PXA910_SSP }, { }, }; diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index 33ecd0c9f0c3..b1e05ccff3ac 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -157,11 +157,13 @@ int s3c_adc_start(struct s3c_adc_client *client, return -EINVAL; } - if (client->is_ts && adc->ts_pend) - return -EAGAIN; - spin_lock_irqsave(&adc->lock, flags); + if (client->is_ts && adc->ts_pend) { + spin_unlock_irqrestore(&adc->lock, flags); + return -EAGAIN; + } + client->channel = channel; client->nr_samples = nr_samples; diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 1d214cb9d770..6303974c2ee0 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -126,7 +126,8 @@ struct platform_device s3c_device_adc = { #ifdef CONFIG_CPU_S3C2440 static struct resource s3c_camif_resource[] = { [0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF), - [1] = DEFINE_RES_IRQ(IRQ_CAM), + [1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C), + [2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P), }; struct platform_device s3c_device_camif = { diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h index 7d048759b772..c0c70a895ca8 100644 --- a/arch/arm/plat-samsung/include/plat/map-s3c.h +++ b/arch/arm/plat-samsung/include/plat/map-s3c.h @@ -22,7 +22,7 @@ #define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG #define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) -#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000) +#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000) #define S3C2410_PA_UART (0x50000000) #define S3C24XX_PA_UART S3C2410_PA_UART diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index f19aff19205c..bc4db9b04e36 100644 --- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -25,7 +25,7 @@ static inline void arch_wdt_reset(void) __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - if (s3c2410_wdtclk) + if (!IS_ERR(s3c2410_wdtclk)) clk_enable(s3c2410_wdtclk); /* put initial values into count and data */ diff --git a/arch/arm/plat-samsung/s5p-clock.c b/arch/arm/plat-samsung/s5p-clock.c index 031a61899bef..48a159911037 100644 --- a/arch/arm/plat-samsung/s5p-clock.c +++ b/arch/arm/plat-samsung/s5p-clock.c @@ -37,6 +37,7 @@ struct clk clk_ext_xtal_mux = { struct clk clk_xusbxti = { .name = "xusbxti", .id = -1, + .rate = 24000000, }; struct clk s5p_clk_27m = { diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index ab3de721c5db..75b05ad0fbad 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -4,7 +4,7 @@ * Debugging macro include header for spear platform * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h index e14a3e4932f9..2bc6b54460a8 100644 --- a/arch/arm/plat-spear/include/plat/pl080.h +++ b/arch/arm/plat-spear/include/plat/pl080.h @@ -4,7 +4,7 @@ * DMAC pl080 definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h index 03ed8b585dcf..88a7fbd24793 100644 --- a/arch/arm/plat-spear/include/plat/shirq.h +++ b/arch/arm/plat-spear/include/plat/shirq.h @@ -4,7 +4,7 @@ * SPEAr platform shared irq layer header file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/plat-spear/include/plat/timex.h index 914d09dd50fd..ef95e5b780bd 100644 --- a/arch/arm/plat-spear/include/plat/timex.h +++ b/arch/arm/plat-spear/include/plat/timex.h @@ -4,7 +4,7 @@ * SPEAr platform specific timex definitions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h index 6dd455bafdfd..2ce6cb17a98b 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c index a56a067717c1..12cf27f935f9 100644 --- a/arch/arm/plat-spear/pl080.c +++ b/arch/arm/plat-spear/pl080.c @@ -4,7 +4,7 @@ * DMAC pl080 definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c index ea0a61302b7e..4f990115b1bd 100644 --- a/arch/arm/plat-spear/restart.c +++ b/arch/arm/plat-spear/restart.c @@ -4,7 +4,7 @@ * SPEAr platform specific restart functions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c index 961fb7261243..853e891e1184 100644 --- a/arch/arm/plat-spear/shirq.c +++ b/arch/arm/plat-spear/shirq.c @@ -4,7 +4,7 @@ * SPEAr platform shared irq layer source file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h index a09230a08e02..62ef17676b40 100644 --- a/arch/h8300/include/asm/pgtable.h +++ b/arch/h8300/include/asm/pgtable.h @@ -70,4 +70,7 @@ extern int is_in_rom(unsigned long); #define VMALLOC_END 0xffffffff #define arch_enter_lazy_cpu_mode() do {} while (0) + +#include + #endif /* _H8300_PGTABLE_H */ diff --git a/arch/h8300/include/asm/uaccess.h b/arch/h8300/include/asm/uaccess.h index 356068cd0879..8725d1ad4272 100644 --- a/arch/h8300/include/asm/uaccess.h +++ b/arch/h8300/include/asm/uaccess.h @@ -100,7 +100,6 @@ extern int __put_user_bad(void); break; \ default: \ __gu_err = __get_user_bad(); \ - __gu_val = 0; \ break; \ } \ (x) = __gu_val; \ @@ -159,4 +158,6 @@ clear_user(void *to, unsigned long n) return 0; } +#define __clear_user clear_user + #endif /* _H8300_UACCESS_H */ diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c index 68d651081bd3..d0b1607f2711 100644 --- a/arch/h8300/kernel/setup.c +++ b/arch/h8300/kernel/setup.c @@ -35,6 +35,7 @@ #include #include #include +#include #if defined(__H8300H__) #define CPU "H8/300H" @@ -54,7 +55,6 @@ unsigned long memory_end; char __initdata command_line[COMMAND_LINE_SIZE]; -extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end; extern int _ramstart, _ramend; extern char _target_name[]; extern void h8300_gpio_init(void); @@ -119,9 +119,9 @@ void __init setup_arch(char **cmdline_p) memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS; #endif - init_mm.start_code = (unsigned long) &_stext; - init_mm.end_code = (unsigned long) &_etext; - init_mm.end_data = (unsigned long) &_edata; + init_mm.start_code = (unsigned long) _stext; + init_mm.end_code = (unsigned long) _etext; + init_mm.end_data = (unsigned long) _edata; init_mm.brk = (unsigned long) 0; #if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT) @@ -134,15 +134,12 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "H8/300 series support by Yoshinori Sato \n"); #ifdef DEBUG - printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x " - "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, - (int) &_sdata, (int) &_edata, - (int) &_sbss, (int) &_ebss); - printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x " - "STACK=0x%06x-0x%06x\n", - (int) &_ebss, (int) memory_start, - (int) memory_start, (int) memory_end, - (int) memory_end, (int) &_ramend); + printk(KERN_DEBUG "KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p " + "BSS=0x%p-0x%p\n", _stext, _etext, _sdata, _edata, __bss_start, + __bss_stop); + printk(KERN_DEBUG "KERNEL -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx " + "STACK=0x%06lx-0x%p\n", __bss_stop, memory_start, memory_start, + memory_end, memory_end, &_ramend); #endif #ifdef CONFIG_DEFAULT_CMDLINE diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c index fca10378701b..5adaadaf9218 100644 --- a/arch/h8300/kernel/signal.c +++ b/arch/h8300/kernel/signal.c @@ -447,7 +447,7 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, * want to handle. Thus you cannot kill init even with a SIGKILL even by * mistake. */ -statis void do_signal(struct pt_regs *regs) +static void do_signal(struct pt_regs *regs) { siginfo_t info; int signr; diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c index 32263a138aa6..e0f74191d553 100644 --- a/arch/h8300/kernel/time.c +++ b/arch/h8300/kernel/time.c @@ -27,6 +27,7 @@ #include #include +#include #include #define TICK_SIZE (tick_nsec / 1000) diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c index 973369c32a95..981e25094b1a 100644 --- a/arch/h8300/mm/init.c +++ b/arch/h8300/mm/init.c @@ -36,6 +36,7 @@ #include #include #include +#include #undef DEBUG @@ -123,7 +124,6 @@ void __init mem_init(void) int codek = 0, datak = 0, initk = 0; /* DAVIDM look at setup memory map generically with reserved area */ unsigned long tmp; - extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end; extern unsigned long _ramend, _ramstart; unsigned long len = &_ramend - &_ramstart; unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */ @@ -142,9 +142,9 @@ void __init mem_init(void) /* this will put all memory onto the freelists */ totalram_pages = free_all_bootmem(); - codek = (&_etext - &_stext) >> 10; - datak = (&_ebss - &_sdata) >> 10; - initk = (&__init_begin - &__init_end) >> 10; + codek = (_etext - _stext) >> 10; + datak = (__bss_stop - _sdata) >> 10; + initk = (__init_begin - __init_end) >> 10; tmp = nr_free_pages() << PAGE_SHIFT; printk(KERN_INFO "Memory available: %luk/%luk RAM, %luk/%luk ROM (%dk kernel code, %dk data)\n", @@ -178,22 +178,21 @@ free_initmem(void) { #ifdef CONFIG_RAMKERNEL unsigned long addr; - extern char __init_begin, __init_end; /* * the following code should be cool even if these sections * are not page aligned. */ - addr = PAGE_ALIGN((unsigned long)(&__init_begin)); + addr = PAGE_ALIGN((unsigned long)(__init_begin)); /* next to check that the page we free is not a partial page */ - for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) { + for (; addr + PAGE_SIZE < (unsigned long)__init_end; addr +=PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } printk(KERN_INFO "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n", - (addr - PAGE_ALIGN((long) &__init_begin)) >> 10, - (int)(PAGE_ALIGN((unsigned long)(&__init_begin))), + (addr - PAGE_ALIGN((long) __init_begin)) >> 10, + (int)(PAGE_ALIGN((unsigned long)__init_begin)), (int)(addr - PAGE_SIZE)); #endif } diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile index 177716b1d613..01729c2979ba 100644 --- a/arch/m32r/boot/compressed/Makefile +++ b/arch/m32r/boot/compressed/Makefile @@ -43,9 +43,9 @@ endif OBJCOPYFLAGS += -R .empty_zero_page -suffix_$(CONFIG_KERNEL_GZIP) = gz -suffix_$(CONFIG_KERNEL_BZIP2) = bz2 -suffix_$(CONFIG_KERNEL_LZMA) = lzma +suffix-$(CONFIG_KERNEL_GZIP) = gz +suffix-$(CONFIG_KERNEL_BZIP2) = bz2 +suffix-$(CONFIG_KERNEL_LZMA) = lzma $(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE $(call if_changed,ld) diff --git a/arch/m32r/boot/compressed/misc.c b/arch/m32r/boot/compressed/misc.c index 370d60881977..28a09529f206 100644 --- a/arch/m32r/boot/compressed/misc.c +++ b/arch/m32r/boot/compressed/misc.c @@ -28,7 +28,7 @@ static unsigned long free_mem_ptr; static unsigned long free_mem_end_ptr; #ifdef CONFIG_KERNEL_BZIP2 -static void *memset(void *s, int c, size_t n) +void *memset(void *s, int c, size_t n) { char *ss = s; @@ -39,6 +39,16 @@ static void *memset(void *s, int c, size_t n) #endif #ifdef CONFIG_KERNEL_GZIP +void *memcpy(void *dest, const void *src, size_t n) +{ + char *d = dest; + const char *s = src; + while (n--) + *d++ = *s++; + + return dest; +} + #define BOOT_HEAP_SIZE 0x10000 #include "../../../../lib/decompress_inflate.c" #endif diff --git a/arch/m32r/include/asm/ptrace.h b/arch/m32r/include/asm/ptrace.h index 527527584dd0..4313aa62b51b 100644 --- a/arch/m32r/include/asm/ptrace.h +++ b/arch/m32r/include/asm/ptrace.h @@ -113,9 +113,6 @@ struct pt_regs { #define PTRACE_OLDSETOPTIONS 21 -/* options set using PTRACE_SETOPTIONS */ -#define PTRACE_O_TRACESYSGOOD 0x00000001 - #ifdef __KERNEL__ #include /* M32R_PSW_BSM, M32R_PSW_BPM */ diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c index 4c03361537aa..51f5e9aa4901 100644 --- a/arch/m32r/kernel/ptrace.c +++ b/arch/m32r/kernel/ptrace.c @@ -591,17 +591,16 @@ void user_enable_single_step(struct task_struct *child) if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0) != sizeof(insn)) - return -EIO; + return; compute_next_pc(insn, pc, &next_pc, child); if (next_pc & 0x80000000) - return -EIO; + return; if (embed_debug_trap(child, next_pc)) - return -EIO; + return; invalidate_cache(); - return 0; } void user_disable_single_step(struct task_struct *child) diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c index f3fb2c029cfc..d0f60b97bbc5 100644 --- a/arch/m32r/kernel/signal.c +++ b/arch/m32r/kernel/signal.c @@ -286,7 +286,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, case -ERESTARTNOINTR: regs->r0 = regs->orig_r0; if (prev_insn(regs) < 0) - return -EFAULT; + return; } } diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index cac5b6be572a..147120128260 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -7,6 +7,8 @@ config M68K select GENERIC_IRQ_SHOW select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS select GENERIC_CPU_DEVICES + select GENERIC_STRNCPY_FROM_USER if MMU + select GENERIC_STRNLEN_USER if MMU select FPU if MMU select ARCH_USES_GETTIMEOFFSET if MMU && !COLDFIRE diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index 1a922fad76f7..eafa2539a8ee 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -1,2 +1,4 @@ include include/asm-generic/Kbuild.asm header-y += cachectl.h + +generic-y += word-at-a-time.h diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h index d63b99ff7ff7..497c31c803ff 100644 --- a/arch/m68k/include/asm/m528xsim.h +++ b/arch/m68k/include/asm/m528xsim.h @@ -86,7 +86,7 @@ /* * QSPI module. */ -#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340) +#define MCFQSPI_BASE (MCF_IPSBAR + 0x340) #define MCFQSPI_SIZE 0x40 #define MCFQSPI_CS0 147 diff --git a/arch/m68k/include/asm/uaccess_mm.h b/arch/m68k/include/asm/uaccess_mm.h index 9c80cd515b20..472c891a4aee 100644 --- a/arch/m68k/include/asm/uaccess_mm.h +++ b/arch/m68k/include/asm/uaccess_mm.h @@ -379,12 +379,15 @@ __constant_copy_to_user(void __user *to, const void *from, unsigned long n) #define copy_from_user(to, from, n) __copy_from_user(to, from, n) #define copy_to_user(to, from, n) __copy_to_user(to, from, n) -long strncpy_from_user(char *dst, const char __user *src, long count); -long strnlen_user(const char __user *src, long n); +#define user_addr_max() \ + (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL) + +extern long strncpy_from_user(char *dst, const char __user *src, long count); +extern __must_check long strlen_user(const char __user *str); +extern __must_check long strnlen_user(const char __user *str, long n); + unsigned long __clear_user(void __user *to, unsigned long n); #define clear_user __clear_user -#define strlen_user(str) strnlen_user(str, 32767) - #endif /* _M68K_UACCESS_H */ diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c index 8b4a2222e658..1bc10e62b9af 100644 --- a/arch/m68k/kernel/ptrace.c +++ b/arch/m68k/kernel/ptrace.c @@ -286,7 +286,7 @@ asmlinkage void syscall_trace(void) } } -#ifdef CONFIG_COLDFIRE +#if defined(CONFIG_COLDFIRE) || !defined(CONFIG_MMU) asmlinkage int syscall_trace_enter(void) { int ret = 0; diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c index d7deb7fc7eb5..707f0573ec6b 100644 --- a/arch/m68k/kernel/time.c +++ b/arch/m68k/kernel/time.c @@ -85,7 +85,7 @@ void __init time_init(void) mach_sched_init(timer_interrupt); } -#ifdef CONFIG_M68KCLASSIC +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET u32 arch_gettimeoffset(void) { @@ -108,4 +108,4 @@ static int __init rtc_init(void) module_init(rtc_init); -#endif /* CONFIG_M68KCLASSIC */ +#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */ diff --git a/arch/m68k/lib/uaccess.c b/arch/m68k/lib/uaccess.c index 5664386338da..5e97f2ee7c11 100644 --- a/arch/m68k/lib/uaccess.c +++ b/arch/m68k/lib/uaccess.c @@ -103,80 +103,6 @@ unsigned long __generic_copy_to_user(void __user *to, const void *from, } EXPORT_SYMBOL(__generic_copy_to_user); -/* - * Copy a null terminated string from userspace. - */ -long strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res; - char c; - - if (count <= 0) - return count; - - asm volatile ("\n" - "1: "MOVES".b (%2)+,%4\n" - " move.b %4,(%1)+\n" - " jeq 2f\n" - " subq.l #1,%3\n" - " jne 1b\n" - "2: sub.l %3,%0\n" - "3:\n" - " .section .fixup,\"ax\"\n" - " .even\n" - "10: move.l %5,%0\n" - " jra 3b\n" - " .previous\n" - "\n" - " .section __ex_table,\"a\"\n" - " .align 4\n" - " .long 1b,10b\n" - " .previous" - : "=d" (res), "+a" (dst), "+a" (src), "+r" (count), "=&d" (c) - : "i" (-EFAULT), "0" (count)); - - return res; -} -EXPORT_SYMBOL(strncpy_from_user); - -/* - * Return the size of a string (including the ending 0) - * - * Return 0 on exception, a value greater than N if too long - */ -long strnlen_user(const char __user *src, long n) -{ - char c; - long res; - - asm volatile ("\n" - "1: subq.l #1,%1\n" - " jmi 3f\n" - "2: "MOVES".b (%0)+,%2\n" - " tst.b %2\n" - " jne 1b\n" - " jra 4f\n" - "\n" - "3: addq.l #1,%0\n" - "4: sub.l %4,%0\n" - "5:\n" - " .section .fixup,\"ax\"\n" - " .even\n" - "20: sub.l %0,%0\n" - " jra 5b\n" - " .previous\n" - "\n" - " .section __ex_table,\"a\"\n" - " .align 4\n" - " .long 2b,20b\n" - " .previous\n" - : "=&a" (res), "+d" (n), "=&d" (c) - : "0" (src), "r" (src)); - - return res; -} -EXPORT_SYMBOL(strnlen_user); - /* * Zero Userspace */ diff --git a/arch/m68k/platform/68328/timers.c b/arch/m68k/platform/68328/timers.c index c801c172b822..f4dc9b295609 100644 --- a/arch/m68k/platform/68328/timers.c +++ b/arch/m68k/platform/68328/timers.c @@ -53,6 +53,7 @@ #endif static u32 m68328_tick_cnt; +static irq_handler_t timer_interrupt; /***************************************************************************/ @@ -62,7 +63,7 @@ static irqreturn_t hw_tick(int irq, void *dummy) TSTAT &= 0; m68328_tick_cnt += TICKS_PER_JIFFY; - return arch_timer_interrupt(irq, dummy); + return timer_interrupt(irq, dummy); } /***************************************************************************/ @@ -99,7 +100,7 @@ static struct clocksource m68328_clk = { /***************************************************************************/ -void hw_timer_init(void) +void hw_timer_init(irq_handler_t handler) { /* disable timer 1 */ TCTL = 0; @@ -115,6 +116,7 @@ void hw_timer_init(void) /* Enable timer 1 */ TCTL |= TCTL_TEN; clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ); + timer_interrupt = handler; } /***************************************************************************/ diff --git a/arch/m68k/platform/68360/config.c b/arch/m68k/platform/68360/config.c index 255fc03913e9..9877cefad1e7 100644 --- a/arch/m68k/platform/68360/config.c +++ b/arch/m68k/platform/68360/config.c @@ -35,6 +35,7 @@ extern void m360_cpm_reset(void); #define OSCILLATOR (unsigned long int)33000000 #endif +static irq_handler_t timer_interrupt; unsigned long int system_clock; extern QUICC *pquicc; @@ -52,7 +53,7 @@ static irqreturn_t hw_tick(int irq, void *dummy) pquicc->timer_ter1 = 0x0002; /* clear timer event */ - return arch_timer_interrupt(irq, dummy); + return timer_interrupt(irq, dummy); } static struct irqaction m68360_timer_irq = { @@ -61,7 +62,7 @@ static struct irqaction m68360_timer_irq = { .handler = hw_tick, }; -void hw_timer_init(void) +void hw_timer_init(irq_handler_t handler) { unsigned char prescaler; unsigned short tgcr_save; @@ -94,6 +95,8 @@ void hw_timer_init(void) pquicc->timer_ter1 = 0x0003; /* clear timer events */ + timer_interrupt = handler; + /* enable timer 1 interrupt in CIMR */ setup_irq(CPMVEC_TIMER1, &m68360_timer_irq); diff --git a/arch/m68k/platform/coldfire/clk.c b/arch/m68k/platform/coldfire/clk.c index 9f1260c5e2ad..44da406897e5 100644 --- a/arch/m68k/platform/coldfire/clk.c +++ b/arch/m68k/platform/coldfire/clk.c @@ -42,4 +42,11 @@ unsigned long clk_get_rate(struct clk *clk) return MCF_CLK; } EXPORT_SYMBOL(clk_get_rate); + +struct clk *devm_clk_get(struct device *dev, const char *id) +{ + return NULL; +} +EXPORT_SYMBOL(devm_clk_get); + /***************************************************************************/ diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 09ab87ee6fef..b3e10fdd3898 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -288,6 +288,7 @@ config MIPS_MALTA select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_MIPS32_R2 select SYS_HAS_CPU_MIPS64_R1 + select SYS_HAS_CPU_MIPS64_R2 select SYS_HAS_CPU_NEVADA select SYS_HAS_CPU_RM7000 select SYS_HAS_EARLY_PRINTK @@ -1423,6 +1424,7 @@ config CPU_SB1 config CPU_CAVIUM_OCTEON bool "Cavium Octeon processor" depends on SYS_HAS_CPU_CAVIUM_OCTEON + select ARCH_SPARSEMEM_ENABLE select CPU_HAS_PREFETCH select CPU_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_SMP diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig index 6210b8d84109..b311be45a720 100644 --- a/arch/mips/bcm47xx/Kconfig +++ b/arch/mips/bcm47xx/Kconfig @@ -21,6 +21,7 @@ config BCM47XX_BCMA select BCMA select BCMA_HOST_SOC select BCMA_DRIVER_MIPS + select BCMA_HOST_PCI if PCI select BCMA_DRIVER_PCI_HOSTMODE if PCI default y help diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c index de4d917fd54d..a551bab5ecb9 100644 --- a/arch/mips/bcm63xx/dev-pcmcia.c +++ b/arch/mips/bcm63xx/dev-pcmcia.c @@ -79,11 +79,11 @@ static int __init config_pcmcia_cs(unsigned int cs, return ret; } -static const __initdata struct { +static const struct { unsigned int cs; unsigned int base; unsigned int size; -} pcmcia_cs[3] = { +} pcmcia_cs[3] __initconst = { { .cs = MPI_CS_PCMCIA_COMMON, .base = BCM_PCMCIA_COMMON_BASE_PA, diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig index f9e275a50d98..2f4f6d5e05b6 100644 --- a/arch/mips/cavium-octeon/Kconfig +++ b/arch/mips/cavium-octeon/Kconfig @@ -82,10 +82,6 @@ config CAVIUM_OCTEON_LOCK_L2_MEMCPY help Lock the kernel's implementation of memcpy() into L2. -config ARCH_SPARSEMEM_ENABLE - def_bool y - select SPARSEMEM_STATIC - config IOMMU_HELPER bool diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index 4b93048044eb..ee1fb9f7f517 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -185,7 +185,6 @@ static void __cpuinit octeon_init_secondary(void) octeon_init_cvmcount(); octeon_irq_setup_secondary(); - raw_local_irq_enable(); } /** @@ -233,6 +232,7 @@ static void octeon_smp_finish(void) /* to generate the first CPU timer interrupt */ write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ); + local_irq_enable(); } /** diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h index 2e1ad4c652b7..82ad35ce2b45 100644 --- a/arch/mips/include/asm/bitops.h +++ b/arch/mips/include/asm/bitops.h @@ -17,7 +17,6 @@ #include #include #include -#include #include /* sigh ... */ #include #include diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h index 285a41fa0b18..eee10dc07ac1 100644 --- a/arch/mips/include/asm/cmpxchg.h +++ b/arch/mips/include/asm/cmpxchg.h @@ -8,6 +8,7 @@ #ifndef __ASM_CMPXCHG_H #define __ASM_CMPXCHG_H +#include #include #include diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index f9fa2a479dd0..95e40c1e8ed1 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -94,6 +94,7 @@ #define PRID_IMP_24KE 0x9600 #define PRID_IMP_74K 0x9700 #define PRID_IMP_1004K 0x9900 +#define PRID_IMP_M14KC 0x9c00 /* * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE @@ -260,12 +261,12 @@ enum cpu_type_enum { */ CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K, CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350, - CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, + CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_M14KC, /* * MIPS64 class processors */ - CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2, + CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2, CPU_XLR, CPU_XLP, @@ -288,7 +289,7 @@ enum cpu_type_enum { #define MIPS_CPU_ISA_M64R2 0x00000100 #define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | \ - MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 ) + MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2) #define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \ MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2) diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h index 86548da650e7..991b659e2548 100644 --- a/arch/mips/include/asm/gic.h +++ b/arch/mips/include/asm/gic.h @@ -206,7 +206,7 @@ #define GIC_VPE_EIC_SHADOW_SET_BASE 0x0100 #define GIC_VPE_EIC_SS(intr) \ - (GIC_EIC_SHADOW_SET_BASE + (4 * intr)) + (GIC_VPE_EIC_SHADOW_SET_BASE + (4 * intr)) #define GIC_VPE_EIC_VEC_BASE 0x0800 #define GIC_VPE_EIC_VEC(intr) \ @@ -330,6 +330,17 @@ struct gic_intr_map { #define GIC_FLAG_TRANSPARENT 0x02 }; +/* + * This is only used in EIC mode. This helps to figure out which + * shared interrupts we need to process when we get a vector interrupt. + */ +#define GIC_MAX_SHARED_INTR 0x5 +struct gic_shared_intr_map { + unsigned int num_shared_intr; + unsigned int intr_list[GIC_MAX_SHARED_INTR]; + unsigned int local_intr_mask; +}; + extern void gic_init(unsigned long gic_base_addr, unsigned long gic_addrspace_size, struct gic_intr_map *intrmap, unsigned int intrmap_size, unsigned int irqbase); @@ -338,5 +349,7 @@ extern unsigned int gic_get_int(void); extern void gic_send_ipi(unsigned int intr); extern unsigned int plat_ipi_call_int_xlate(unsigned int); extern unsigned int plat_ipi_resched_int_xlate(unsigned int); +extern void gic_bind_eic_interrupt(int irq, int set); +extern unsigned int gic_get_timer_pending(void); #endif /* _ASM_GICREGS_H */ diff --git a/arch/mips/include/asm/inst.h b/arch/mips/include/asm/inst.h index 7ebfc392e58d..ab84064283db 100644 --- a/arch/mips/include/asm/inst.h +++ b/arch/mips/include/asm/inst.h @@ -251,7 +251,7 @@ struct f_format { /* FPU register format */ unsigned int func : 6; }; -struct ma_format { /* FPU multipy and add format (MIPS IV) */ +struct ma_format { /* FPU multiply and add format (MIPS IV) */ unsigned int opcode : 6; unsigned int fr : 5; unsigned int ft : 5; @@ -324,7 +324,7 @@ struct f_format { /* FPU register format */ unsigned int opcode : 6; }; -struct ma_format { /* FPU multipy and add format (MIPS IV) */ +struct ma_format { /* FPU multiply and add format (MIPS IV) */ unsigned int fmt : 2; unsigned int func : 4; unsigned int fd : 5; diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index a58f22998a86..29d9c23c20c7 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -17,6 +17,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h index fb698dc09bc9..78dbb8a86da2 100644 --- a/arch/mips/include/asm/irq.h +++ b/arch/mips/include/asm/irq.h @@ -136,6 +136,7 @@ extern void free_irqno(unsigned int irq); * IE7. Since R2 their number has to be read from the c0_intctl register. */ #define CP0_LEGACY_COMPARE_IRQ 7 +#define CP0_LEGACY_PERFCNT_IRQ 7 extern int cp0_compare_irq; extern int cp0_compare_irq_shift; diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index 94d4faad29a1..fdcd78ca1b03 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -99,7 +99,7 @@ #define CKCTL_6368_USBH_CLK_EN (1 << 15) #define CKCTL_6368_DISABLE_GLESS_EN (1 << 16) #define CKCTL_6368_NAND_CLK_EN (1 << 17) -#define CKCTL_6368_IPSEC_CLK_EN (1 << 17) +#define CKCTL_6368_IPSEC_CLK_EN (1 << 18) #define CKCTL_6368_ALL_SAFE_EN (CKCTL_6368_SWPKT_USB_EN | \ CKCTL_6368_SWPKT_SAR_EN | \ diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h index d11aa02a956a..5447d9fc4219 100644 --- a/arch/mips/include/asm/mips-boards/maltaint.h +++ b/arch/mips/include/asm/mips-boards/maltaint.h @@ -86,6 +86,16 @@ #define GIC_CPU_INT4 4 /* . */ #define GIC_CPU_INT5 5 /* Core Interrupt 5 */ +/* MALTA GIC local interrupts */ +#define GIC_INT_TMR (GIC_CPU_INT5) +#define GIC_INT_PERFCTR (GIC_CPU_INT5) + +/* GIC constants */ +/* Add 2 to convert non-eic hw int # to eic vector # */ +#define GIC_CPU_TO_VEC_OFFSET (2) +/* If we map an intr to pin X, GIC will actually generate vector X+1 */ +#define GIC_PIN_TO_VEC_OFFSET (1) + #define GIC_EXT_INTR(x) x /* External Interrupts used for IPI */ diff --git a/arch/mips/include/asm/mipsmtregs.h b/arch/mips/include/asm/mipsmtregs.h index c9420aa97e32..e71ff4c317f2 100644 --- a/arch/mips/include/asm/mipsmtregs.h +++ b/arch/mips/include/asm/mipsmtregs.h @@ -48,7 +48,7 @@ #define CP0_VPECONF0 $1, 2 #define CP0_VPECONF1 $1, 3 #define CP0_YQMASK $1, 4 -#define CP0_VPESCHEDULE $1, 5 +#define CP0_VPESCHEDULE $1, 5 #define CP0_VPESCHEFBK $1, 6 #define CP0_TCSTATUS $2, 1 #define CP0_TCBIND $2, 2 diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h index 5d33621b5658..4f8ddba8c360 100644 --- a/arch/mips/include/asm/switch_to.h +++ b/arch/mips/include/asm/switch_to.h @@ -22,7 +22,7 @@ struct task_struct; * switch_to(n) should switch tasks to task nr n, first * checking that n isn't the current task, in which case it does nothing. */ -extern asmlinkage void *resume(void *last, void *next, void *next_ti); +extern asmlinkage void *resume(void *last, void *next, void *next_ti, u32 __usedfpu); extern unsigned int ll_bit; extern struct task_struct *ll_task; @@ -66,11 +66,13 @@ do { \ #define switch_to(prev, next, last) \ do { \ + u32 __usedfpu; \ __mips_mt_fpaff_switch_to(prev); \ if (cpu_has_dsp) \ __save_dsp(prev); \ __clear_software_ll_bit(); \ - (last) = resume(prev, next, task_thread_info(next)); \ + __usedfpu = test_and_clear_tsk_thread_flag(prev, TIF_USEDFPU); \ + (last) = resume(prev, next, task_thread_info(next), __usedfpu); \ } while (0) #define finish_arch_switch(prev) \ diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index e2eca7d10598..ca97e0ecb64b 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -60,6 +60,8 @@ struct thread_info { register struct thread_info *__current_thread_info __asm__("$28"); #define current_thread_info() __current_thread_info +#endif /* !__ASSEMBLY__ */ + /* thread information allocation */ #if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_32BIT) #define THREAD_SIZE_ORDER (1) @@ -85,8 +87,6 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define STACK_WARN (THREAD_SIZE / 8) -#endif /* !__ASSEMBLY__ */ - #define PREEMPT_ACTIVE 0x10000000 /* diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 6ae7ce4ac63e..f4630e1082ab 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -4,7 +4,7 @@ * Copyright (C) xxxx the Anonymous * Copyright (C) 1994 - 2006 Ralf Baechle * Copyright (C) 2003, 2004 Maciej W. Rozycki - * Copyright (C) 2001, 2004 MIPS Inc. + * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -199,6 +199,7 @@ void __init check_wait(void) cpu_wait = rm7k_wait_irqoff; break; + case CPU_M14KC: case CPU_24K: case CPU_34K: case CPU_1004K: @@ -810,6 +811,10 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) c->cputype = CPU_5KC; __cpu_name[cpu] = "MIPS 5Kc"; break; + case PRID_IMP_5KE: + c->cputype = CPU_5KE; + __cpu_name[cpu] = "MIPS 5KE"; + break; case PRID_IMP_20KC: c->cputype = CPU_20KC; __cpu_name[cpu] = "MIPS 20Kc"; @@ -831,6 +836,10 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) c->cputype = CPU_74K; __cpu_name[cpu] = "MIPS 74Kc"; break; + case PRID_IMP_M14KC: + c->cputype = CPU_M14KC; + __cpu_name[cpu] = "MIPS M14Kc"; + break; case PRID_IMP_1004K: c->cputype = CPU_1004K; __cpu_name[cpu] = "MIPS 1004Kc"; diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c index 57ba13edb03a..3fc1691110dc 100644 --- a/arch/mips/kernel/mips_ksyms.c +++ b/arch/mips/kernel/mips_ksyms.c @@ -5,7 +5,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05 by Ralf Baechle + * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05, 12 by Ralf Baechle * Copyright (C) 1999, 2000, 01 Silicon Graphics, Inc. */ #include @@ -34,6 +34,12 @@ EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(kernel_thread); +/* + * Functions that operate on entire pages. Mostly used by memory management. + */ +EXPORT_SYMBOL(clear_page); +EXPORT_SYMBOL(copy_page); + /* * Userspace access stuff. */ diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S index ce89c8061708..0441f54b2a6a 100644 --- a/arch/mips/kernel/octeon_switch.S +++ b/arch/mips/kernel/octeon_switch.S @@ -31,7 +31,7 @@ /* * task_struct *resume(task_struct *prev, task_struct *next, - * struct thread_info *next_ti) + * struct thread_info *next_ti, int usedfpu) */ .align 7 LEAF(resume) diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index f29099b104c4..eb5e394a4650 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -162,11 +162,6 @@ static unsigned int counters_total_to_per_cpu(unsigned int counters) return counters >> vpe_shift(); } -static unsigned int counters_per_cpu_to_total(unsigned int counters) -{ - return counters << vpe_shift(); -} - #else /* !CONFIG_MIPS_MT_SMP */ #define vpe_id() 0 diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S index 293898391e67..9c51be5a163a 100644 --- a/arch/mips/kernel/r2300_switch.S +++ b/arch/mips/kernel/r2300_switch.S @@ -43,7 +43,7 @@ /* * task_struct *resume(task_struct *prev, task_struct *next, - * struct thread_info *next_ti) ) + * struct thread_info *next_ti, int usedfpu) */ LEAF(resume) mfc0 t1, CP0_STATUS @@ -51,18 +51,9 @@ LEAF(resume) cpu_save_nonscratch a0 sw ra, THREAD_REG31(a0) - /* - * check if we need to save FPU registers - */ - lw t3, TASK_THREAD_INFO(a0) - lw t0, TI_FLAGS(t3) - li t1, _TIF_USEDFPU - and t2, t0, t1 - beqz t2, 1f - nor t1, zero, t1 + beqz a3, 1f - and t0, t0, t1 - sw t0, TI_FLAGS(t3) + PTR_L t3, TASK_THREAD_INFO(a0) /* * clear saved user stack CU1 bit diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S index 9414f9354469..42d2a3938420 100644 --- a/arch/mips/kernel/r4k_switch.S +++ b/arch/mips/kernel/r4k_switch.S @@ -41,7 +41,7 @@ /* * task_struct *resume(task_struct *prev, task_struct *next, - * struct thread_info *next_ti) + * struct thread_info *next_ti, int usedfpu) */ .align 5 LEAF(resume) @@ -53,16 +53,10 @@ /* * check if we need to save FPU registers */ + + beqz a3, 1f + PTR_L t3, TASK_THREAD_INFO(a0) - LONG_L t0, TI_FLAGS(t3) - li t1, _TIF_USEDFPU - and t2, t0, t1 - beqz t2, 1f - nor t1, zero, t1 - - and t0, t0, t1 - LONG_S t0, TI_FLAGS(t3) - /* * clear saved user stack CU1 bit */ diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index 3046e2986006..8e393b8443f7 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include @@ -197,13 +196,6 @@ static void bmips_init_secondary(void) write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0)); #endif - - /* make sure there won't be a timer interrupt for a little while */ - write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ); - - irq_enable_hazard(); - set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE); - irq_enable_hazard(); } /* @@ -212,6 +204,13 @@ static void bmips_init_secondary(void) static void bmips_smp_finish(void) { pr_info("SMP: CPU%d is running\n", smp_processor_id()); + + /* make sure there won't be a timer interrupt for a little while */ + write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ); + + irq_enable_hazard(); + set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE); + irq_enable_hazard(); } /* diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 48650c818040..1268392f1d27 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -122,13 +122,21 @@ asmlinkage __cpuinit void start_secondary(void) notify_cpu_starting(cpu); - mp_ops->smp_finish(); + set_cpu_online(cpu, true); + set_cpu_sibling_map(cpu); cpu_set(cpu, cpu_callin_map); synchronise_count_slave(); + /* + * irq will be enabled in ->smp_finish(), enabling it too early + * is dangerous. + */ + WARN_ON_ONCE(!irqs_disabled()); + mp_ops->smp_finish(); + cpu_idle(); } @@ -196,8 +204,6 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *tidle) while (!cpu_isset(cpu, cpu_callin_map)) udelay(100); - set_cpu_online(cpu, true); - return 0; } diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index f5dd38f1d015..15b5f3cfd20c 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -322,7 +322,7 @@ int __init smtc_build_cpu_map(int start_cpu_slot) /* * Common setup before any secondaries are started - * Make sure all CPU's are in a sensible state before we boot any of the + * Make sure all CPUs are in a sensible state before we boot any of the * secondaries. * * For MIPS MT "SMTC" operation, we set up all TCs, spread as evenly @@ -340,12 +340,12 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) /* * TCContext gets an offset from the base of the IPIQ array * to be used in low-level code to detect the presence of - * an active IPI queue + * an active IPI queue. */ write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16); /* Bind tc to vpe */ write_tc_c0_tcbind(vpe); - /* In general, all TCs should have the same cpu_data indications */ + /* In general, all TCs should have the same cpu_data indications. */ memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips)); /* For 34Kf, start with TC/CPU 0 as sole owner of single FPU context */ if (cpu_data[0].cputype == CPU_34K || @@ -358,8 +358,8 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) } /* - * Tweak to get Count registes in as close a sync as possible. - * Value seems good for 34K-class cores. + * Tweak to get Count registes in as close a sync as possible. The + * value seems good for 34K-class cores. */ #define CP0_SKEW 8 @@ -615,7 +615,6 @@ void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle) void smtc_init_secondary(void) { - local_irq_enable(); } void smtc_smp_finish(void) @@ -631,6 +630,8 @@ void smtc_smp_finish(void) if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id)) write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); + local_irq_enable(); + printk("TC %d going on-line as CPU %d\n", cpu_data[smp_processor_id()].tc_id, smp_processor_id()); } diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c index 99f913c8d7a6..842d55e411fd 100644 --- a/arch/mips/kernel/sync-r4k.c +++ b/arch/mips/kernel/sync-r4k.c @@ -111,7 +111,6 @@ void __cpuinit synchronise_count_master(void) void __cpuinit synchronise_count_slave(void) { int i; - unsigned long flags; unsigned int initcount; int ncpus; @@ -123,8 +122,6 @@ void __cpuinit synchronise_count_slave(void) return; #endif - local_irq_save(flags); - /* * Not every cpu is online at the time this gets called, * so we first wait for the master to say everyone is ready @@ -154,7 +151,5 @@ void __cpuinit synchronise_count_slave(void) } /* Arrange for an interrupt in a short while */ write_c0_compare(read_c0_count() + COUNTON); - - local_irq_restore(flags); } #undef NR_LOOPS diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 2d0c2a277f52..c3c293543703 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -132,6 +132,9 @@ static void show_backtrace(struct task_struct *task, const struct pt_regs *regs) unsigned long ra = regs->regs[31]; unsigned long pc = regs->cp0_epc; + if (!task) + task = current; + if (raw_show_trace || !__kernel_text_address(pc)) { show_raw_backtrace(sp); return; @@ -1249,6 +1252,7 @@ static inline void parity_protection_init(void) break; case CPU_5KC: + case CPU_5KE: write_c0_ecc(0x80000000); back_to_back_c0_hazard(); /* Set the PE bit (bit 31) in the c0_errctl register. */ @@ -1498,6 +1502,7 @@ extern void flush_tlb_handlers(void); * Timer interrupt */ int cp0_compare_irq; +EXPORT_SYMBOL_GPL(cp0_compare_irq); int cp0_compare_irq_shift; /* @@ -1597,7 +1602,7 @@ void __cpuinit per_cpu_trap_init(bool is_boot_cpu) cp0_perfcount_irq = -1; } else { cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ; - cp0_compare_irq_shift = cp0_compare_irq; + cp0_compare_irq_shift = CP0_LEGACY_PERFCNT_IRQ; cp0_perfcount_irq = -1; } diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 924da5eb7031..df243a64f430 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -1,5 +1,6 @@ #include #include +#include #include #undef mips @@ -72,7 +73,7 @@ SECTIONS .data : { /* Data */ . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */ - INIT_TASK_DATA(PAGE_SIZE) + INIT_TASK_DATA(THREAD_SIZE) NOSAVE_DATA CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 4aa20280613e..fd6203f14f1f 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -3,8 +3,8 @@ # obj-y += cache.o dma-default.o extable.o fault.o \ - gup.o init.o mmap.o page.o tlbex.o \ - tlbex-fault.o uasm.o + gup.o init.o mmap.o page.o page-funcs.o \ + tlbex.o tlbex-fault.o uasm.o obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o obj-$(CONFIG_64BIT) += pgtable-64.o diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 5109be96d98d..f092c265dc63 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -977,7 +977,7 @@ static void __cpuinit probe_pcache(void) c->icache.linesz = 2 << lsize; else c->icache.linesz = lsize; - c->icache.sets = 64 << ((config1 >> 22) & 7); + c->icache.sets = 32 << (((config1 >> 22) + 1) & 7); c->icache.ways = 1 + ((config1 >> 16) & 7); icache_size = c->icache.sets * @@ -997,7 +997,7 @@ static void __cpuinit probe_pcache(void) c->dcache.linesz = 2 << lsize; else c->dcache.linesz= lsize; - c->dcache.sets = 64 << ((config1 >> 13) & 7); + c->dcache.sets = 32 << (((config1 >> 13) + 1) & 7); c->dcache.ways = 1 + ((config1 >> 7) & 7); dcache_size = c->dcache.sets * @@ -1051,6 +1051,7 @@ static void __cpuinit probe_pcache(void) case CPU_R14000: break; + case CPU_M14KC: case CPU_24K: case CPU_34K: case CPU_74K: diff --git a/arch/mips/mm/page-funcs.S b/arch/mips/mm/page-funcs.S new file mode 100644 index 000000000000..48a6b38ff13e --- /dev/null +++ b/arch/mips/mm/page-funcs.S @@ -0,0 +1,50 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Micro-assembler generated clear_page/copy_page functions. + * + * Copyright (C) 2012 MIPS Technologies, Inc. + * Copyright (C) 2012 Ralf Baechle + */ +#include +#include + +#ifdef CONFIG_SIBYTE_DMA_PAGEOPS +#define cpu_clear_page_function_name clear_page_cpu +#define cpu_copy_page_function_name copy_page_cpu +#else +#define cpu_clear_page_function_name clear_page +#define cpu_copy_page_function_name copy_page +#endif + +/* + * Maximum sizes: + * + * R4000 128 bytes S-cache: 0x058 bytes + * R4600 v1.7: 0x05c bytes + * R4600 v2.0: 0x060 bytes + * With prefetching, 16 word strides 0x120 bytes + */ +EXPORT(__clear_page_start) +LEAF(cpu_clear_page_function_name) +1: j 1b /* Dummy, will be replaced. */ + .space 288 +END(cpu_clear_page_function_name) +EXPORT(__clear_page_end) + +/* + * Maximum sizes: + * + * R4000 128 bytes S-cache: 0x11c bytes + * R4600 v1.7: 0x080 bytes + * R4600 v2.0: 0x07c bytes + * With prefetching, 16 word strides 0x540 bytes + */ +EXPORT(__copy_page_start) +LEAF(cpu_copy_page_function_name) +1: j 1b /* Dummy, will be replaced. */ + .space 1344 +END(cpu_copy_page_function_name) +EXPORT(__copy_page_end) diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index cc0b626858b3..98f530e18216 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -6,6 +6,7 @@ * Copyright (C) 2003, 04, 05 Ralf Baechle (ralf@linux-mips.org) * Copyright (C) 2007 Maciej W. Rozycki * Copyright (C) 2008 Thiemo Seufer + * Copyright (C) 2012 MIPS Technologies, Inc. */ #include #include @@ -71,45 +72,6 @@ static struct uasm_reloc __cpuinitdata relocs[5]; #define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x00002010) #define cpu_is_r4600_v2_x() ((read_c0_prid() & 0xfffffff0) == 0x00002020) -/* - * Maximum sizes: - * - * R4000 128 bytes S-cache: 0x058 bytes - * R4600 v1.7: 0x05c bytes - * R4600 v2.0: 0x060 bytes - * With prefetching, 16 word strides 0x120 bytes - */ - -static u32 clear_page_array[0x120 / 4]; - -#ifdef CONFIG_SIBYTE_DMA_PAGEOPS -void clear_page_cpu(void *page) __attribute__((alias("clear_page_array"))); -#else -void clear_page(void *page) __attribute__((alias("clear_page_array"))); -#endif - -EXPORT_SYMBOL(clear_page); - -/* - * Maximum sizes: - * - * R4000 128 bytes S-cache: 0x11c bytes - * R4600 v1.7: 0x080 bytes - * R4600 v2.0: 0x07c bytes - * With prefetching, 16 word strides 0x540 bytes - */ -static u32 copy_page_array[0x540 / 4]; - -#ifdef CONFIG_SIBYTE_DMA_PAGEOPS -void -copy_page_cpu(void *to, void *from) __attribute__((alias("copy_page_array"))); -#else -void copy_page(void *to, void *from) __attribute__((alias("copy_page_array"))); -#endif - -EXPORT_SYMBOL(copy_page); - - static int pref_bias_clear_store __cpuinitdata; static int pref_bias_copy_load __cpuinitdata; static int pref_bias_copy_store __cpuinitdata; @@ -282,10 +244,15 @@ static inline void __cpuinit build_clear_pref(u32 **buf, int off) } } +extern u32 __clear_page_start; +extern u32 __clear_page_end; +extern u32 __copy_page_start; +extern u32 __copy_page_end; + void __cpuinit build_clear_page(void) { int off; - u32 *buf = (u32 *)&clear_page_array; + u32 *buf = &__clear_page_start; struct uasm_label *l = labels; struct uasm_reloc *r = relocs; int i; @@ -356,17 +323,17 @@ void __cpuinit build_clear_page(void) uasm_i_jr(&buf, RA); uasm_i_nop(&buf); - BUG_ON(buf > clear_page_array + ARRAY_SIZE(clear_page_array)); + BUG_ON(buf > &__clear_page_end); uasm_resolve_relocs(relocs, labels); pr_debug("Synthesized clear page handler (%u instructions).\n", - (u32)(buf - clear_page_array)); + (u32)(buf - &__clear_page_start)); pr_debug("\t.set push\n"); pr_debug("\t.set noreorder\n"); - for (i = 0; i < (buf - clear_page_array); i++) - pr_debug("\t.word 0x%08x\n", clear_page_array[i]); + for (i = 0; i < (buf - &__clear_page_start); i++) + pr_debug("\t.word 0x%08x\n", (&__clear_page_start)[i]); pr_debug("\t.set pop\n"); } @@ -427,7 +394,7 @@ static inline void build_copy_store_pref(u32 **buf, int off) void __cpuinit build_copy_page(void) { int off; - u32 *buf = (u32 *)©_page_array; + u32 *buf = &__copy_page_start; struct uasm_label *l = labels; struct uasm_reloc *r = relocs; int i; @@ -595,21 +562,23 @@ void __cpuinit build_copy_page(void) uasm_i_jr(&buf, RA); uasm_i_nop(&buf); - BUG_ON(buf > copy_page_array + ARRAY_SIZE(copy_page_array)); + BUG_ON(buf > &__copy_page_end); uasm_resolve_relocs(relocs, labels); pr_debug("Synthesized copy page handler (%u instructions).\n", - (u32)(buf - copy_page_array)); + (u32)(buf - &__copy_page_start)); pr_debug("\t.set push\n"); pr_debug("\t.set noreorder\n"); - for (i = 0; i < (buf - copy_page_array); i++) - pr_debug("\t.word 0x%08x\n", copy_page_array[i]); + for (i = 0; i < (buf - &__copy_page_start); i++) + pr_debug("\t.word 0x%08x\n", (&__copy_page_start)[i]); pr_debug("\t.set pop\n"); } #ifdef CONFIG_SIBYTE_DMA_PAGEOPS +extern void clear_page_cpu(void *page); +extern void copy_page_cpu(void *to, void *from); /* * Pad descriptors to cacheline, since each is exclusively owned by a diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 0bc485b3cd60..03eb0ef91580 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -9,6 +9,7 @@ * Copyright (C) 2005, 2007, 2008, 2009 Maciej W. Rozycki * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) * Copyright (C) 2008, 2009 Cavium Networks, Inc. + * Copyright (C) 2011 MIPS Technologies, Inc. * * ... and the days got worse and worse and now you see * I've gone completly out of my mind. @@ -494,6 +495,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_R14000: case CPU_4KC: case CPU_4KEC: + case CPU_M14KC: case CPU_SB1: case CPU_SB1A: case CPU_4KSC: diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c index bf80921f2f56..284dea54faf5 100644 --- a/arch/mips/mti-malta/malta-pci.c +++ b/arch/mips/mti-malta/malta-pci.c @@ -241,8 +241,9 @@ void __init mips_pcibios_init(void) return; } - if (controller->io_resource->start < 0x00001000UL) /* FIXME */ - controller->io_resource->start = 0x00001000UL; + /* Change start address to avoid conflicts with ACPI and SMB devices */ + if (controller->io_resource->start < 0x00002000UL) + controller->io_resource->start = 0x00002000UL; iomem_resource.end &= 0xfffffffffULL; /* 64 GB */ ioport_resource.end = controller->io_resource->end; @@ -253,7 +254,7 @@ void __init mips_pcibios_init(void) } /* Enable PCI 2.1 compatibility in PIIX4 */ -static void __init quirk_dlcsetup(struct pci_dev *dev) +static void __devinit quirk_dlcsetup(struct pci_dev *dev) { u8 odlc, ndlc; (void) pci_read_config_byte(dev, 0x82, &odlc); diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c index b7f37d4982fa..2e28f653f66d 100644 --- a/arch/mips/mti-malta/malta-setup.c +++ b/arch/mips/mti-malta/malta-setup.c @@ -111,7 +111,7 @@ static void __init pci_clock_check(void) unsigned int __iomem *jmpr_p = (unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int)); int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07; - static const int pciclocks[] __initdata = { + static const int pciclocks[] __initconst = { 33, 20, 25, 30, 12, 16, 37, 10 }; int pciclock = pciclocks[jmpr]; diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c index acb677a1227c..b3df7c2aad1e 100644 --- a/arch/mips/netlogic/xlp/setup.c +++ b/arch/mips/netlogic/xlp/setup.c @@ -82,8 +82,10 @@ void __init prom_free_prom_memory(void) void xlp_mmu_init(void) { + /* enable extended TLB and Large Fixed TLB */ write_c0_config6(read_c0_config6() | 0x24); - current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1; + + /* set page mask of Fixed TLB in config7 */ write_c0_config7(PM_DEFAULT_MASK >> (13 + (ffz(PM_DEFAULT_MASK >> 13) / 2))); } @@ -100,6 +102,10 @@ void __init prom_init(void) nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1)); #ifdef CONFIG_SMP nlm_wakeup_secondary_cpus(0xffffffff); + + /* update TLB size after waking up threads */ + current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1; + register_smp_ops(&nlm_smp_ops); #endif } diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index d1f2d4c52d42..b6e378211a2c 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -78,6 +78,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) switch (current_cpu_type()) { case CPU_5KC: + case CPU_M14KC: case CPU_20KC: case CPU_24K: case CPU_25KF: diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index baba3bcaa3c2..4d80a856048d 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -322,6 +322,10 @@ static int __init mipsxx_init(void) op_model_mipsxx_ops.num_counters = counters; switch (current_cpu_type()) { + case CPU_M14KC: + op_model_mipsxx_ops.cpu_type = "mips/M14Kc"; + break; + case CPU_20KC: op_model_mipsxx_ops.cpu_type = "mips/20K"; break; diff --git a/arch/mips/pci/fixup-fuloong2e.c b/arch/mips/pci/fixup-fuloong2e.c index d5d4c018fb04..0857ab8c3919 100644 --- a/arch/mips/pci/fixup-fuloong2e.c +++ b/arch/mips/pci/fixup-fuloong2e.c @@ -48,7 +48,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev) return 0; } -static void __init loongson2e_nec_fixup(struct pci_dev *pdev) +static void __devinit loongson2e_nec_fixup(struct pci_dev *pdev) { unsigned int val; @@ -60,7 +60,7 @@ static void __init loongson2e_nec_fixup(struct pci_dev *pdev) pci_write_config_dword(pdev, 0xe4, 1 << 5); } -static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev) +static void __devinit loongson2e_686b_func0_fixup(struct pci_dev *pdev) { unsigned char c; @@ -135,7 +135,7 @@ static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev) printk(KERN_INFO"via686b fix: ISA bridge done\n"); } -static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev) +static void __devinit loongson2e_686b_func1_fixup(struct pci_dev *pdev) { printk(KERN_INFO"via686b fix: IDE\n"); @@ -168,19 +168,19 @@ static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev) printk(KERN_INFO"via686b fix: IDE done\n"); } -static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev) +static void __devinit loongson2e_686b_func2_fixup(struct pci_dev *pdev) { /* irq routing */ pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10); } -static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev) +static void __devinit loongson2e_686b_func3_fixup(struct pci_dev *pdev) { /* irq routing */ pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11); } -static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev) +static void __devinit loongson2e_686b_func5_fixup(struct pci_dev *pdev) { unsigned int val; unsigned char c; diff --git a/arch/mips/pci/fixup-lemote2f.c b/arch/mips/pci/fixup-lemote2f.c index 4b9768d5d729..a7b917dcf604 100644 --- a/arch/mips/pci/fixup-lemote2f.c +++ b/arch/mips/pci/fixup-lemote2f.c @@ -96,21 +96,21 @@ int pcibios_plat_dev_init(struct pci_dev *dev) } /* CS5536 SPEC. fixup */ -static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev) +static void __devinit loongson_cs5536_isa_fixup(struct pci_dev *pdev) { /* the uart1 and uart2 interrupt in PIC is enabled as default */ pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1); pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1); } -static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev) +static void __devinit loongson_cs5536_ide_fixup(struct pci_dev *pdev) { /* setting the mutex pin as IDE function */ pci_write_config_dword(pdev, PCI_IDE_CFG_REG, CS5536_IDE_FLASH_SIGNATURE); } -static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev) +static void __devinit loongson_cs5536_acc_fixup(struct pci_dev *pdev) { /* enable the AUDIO interrupt in PIC */ pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1); @@ -118,14 +118,14 @@ static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev) pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0); } -static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev) +static void __devinit loongson_cs5536_ohci_fixup(struct pci_dev *pdev) { /* enable the OHCI interrupt in PIC */ /* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */ pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1); } -static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev) +static void __devinit loongson_cs5536_ehci_fixup(struct pci_dev *pdev) { u32 hi, lo; @@ -137,7 +137,7 @@ static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev) pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000); } -static void __init loongson_nec_fixup(struct pci_dev *pdev) +static void __devinit loongson_nec_fixup(struct pci_dev *pdev) { unsigned int val; diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c index 0f48498bc231..70073c98ed32 100644 --- a/arch/mips/pci/fixup-malta.c +++ b/arch/mips/pci/fixup-malta.c @@ -49,10 +49,10 @@ int pcibios_plat_dev_init(struct pci_dev *dev) return 0; } -static void __init malta_piix_func0_fixup(struct pci_dev *pdev) +static void __devinit malta_piix_func0_fixup(struct pci_dev *pdev) { unsigned char reg_val; - static int piixirqmap[16] __initdata = { /* PIIX PIRQC[A:D] irq mappings */ + static int piixirqmap[16] __devinitdata = { /* PIIX PIRQC[A:D] irq mappings */ 0, 0, 0, 3, 4, 5, 6, 7, 0, 9, 10, 11, @@ -83,7 +83,7 @@ static void __init malta_piix_func0_fixup(struct pci_dev *pdev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, malta_piix_func0_fixup); -static void __init malta_piix_func1_fixup(struct pci_dev *pdev) +static void __devinit malta_piix_func1_fixup(struct pci_dev *pdev) { unsigned char reg_val; diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c index e08f49cb6875..8e4f8288eca2 100644 --- a/arch/mips/pci/fixup-mpc30x.c +++ b/arch/mips/pci/fixup-mpc30x.c @@ -22,13 +22,13 @@ #include -static const int internal_func_irqs[] __initdata = { +static const int internal_func_irqs[] __initconst = { VRC4173_CASCADE_IRQ, VRC4173_AC97_IRQ, VRC4173_USB_IRQ, }; -static const int irq_tab_mpc30x[] __initdata = { +static const int irq_tab_mpc30x[] __initconst = { [12] = VRC4173_PCMCIA1_IRQ, [13] = VRC4173_PCMCIA2_IRQ, [29] = MQ200_IRQ, diff --git a/arch/mips/pci/fixup-sb1250.c b/arch/mips/pci/fixup-sb1250.c index f0bb9146e6c0..d02900a72916 100644 --- a/arch/mips/pci/fixup-sb1250.c +++ b/arch/mips/pci/fixup-sb1250.c @@ -15,7 +15,7 @@ * Set the BCM1250, etc. PCI host bridge's TRDY timeout * to the finite max. */ -static void __init quirk_sb1250_pci(struct pci_dev *dev) +static void __devinit quirk_sb1250_pci(struct pci_dev *dev) { pci_write_config_byte(dev, 0x40, 0xff); } @@ -25,7 +25,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_PCI, /* * The BCM1250, etc. PCI/HT bridge reports as a host bridge. */ -static void __init quirk_sb1250_ht(struct pci_dev *dev) +static void __devinit quirk_sb1250_ht(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_PCI << 8; } @@ -35,7 +35,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_HT, /* * Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max. */ -static void __init quirk_sp1011(struct pci_dev *dev) +static void __devinit quirk_sp1011(struct pci_dev *dev) { pci_write_config_byte(dev, 0x64, 0xff); } diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index a1e7e6d80c8c..bc13e29d2bb3 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -495,7 +495,7 @@ irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id) } #ifdef CONFIG_TOSHIBA_FPCIB0 -static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev) +static void __devinit tx4927_quirk_slc90e66_bridge(struct pci_dev *dev) { struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus); diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index 0fbe4c0c170a..fdc24440294c 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -212,7 +212,7 @@ static inline void pci_enable_swapping(struct pci_dev *dev) bridge->b_widget.w_tflush; /* Flush */ } -static void __init pci_fixup_ioc3(struct pci_dev *d) +static void __devinit pci_fixup_ioc3(struct pci_dev *d) { pci_disable_swapping(d); } diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c index ea453532a33c..075d87acd12a 100644 --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c @@ -129,7 +129,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev) /* setup reset gpio used by pci */ reset_gpio = of_get_named_gpio(node, "gpio-reset", 0); - if (reset_gpio > 0) + if (gpio_is_valid(reset_gpio)) devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset"); /* enable auto-switching between PCI and EBU */ @@ -192,7 +192,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev) ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN); /* toggle reset pin */ - if (reset_gpio > 0) { + if (gpio_is_valid(reset_gpio)) { __gpio_set_value(reset_gpio, 0); wmb(); mdelay(1); diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c index 1644805a6730..172af1cd5867 100644 --- a/arch/mips/pci/pci-xlr.c +++ b/arch/mips/pci/pci-xlr.c @@ -41,6 +41,7 @@ #include #include #include +#include #include @@ -156,35 +157,55 @@ struct pci_controller nlm_pci_controller = { .io_offset = 0x00000000UL, }; +/* + * The top level PCIe links on the XLS PCIe controller appear as + * bridges. Given a device, this function finds which link it is + * on. + */ +static struct pci_dev *xls_get_pcie_link(const struct pci_dev *dev) +{ + struct pci_bus *bus, *p; + + /* Find the bridge on bus 0 */ + bus = dev->bus; + for (p = bus->parent; p && p->number != 0; p = p->parent) + bus = p; + + return p ? bus->self : NULL; +} + static int get_irq_vector(const struct pci_dev *dev) { + struct pci_dev *lnk; + if (!nlm_chip_is_xls()) - return PIC_PCIX_IRQ; /* for XLR just one IRQ*/ + return PIC_PCIX_IRQ; /* for XLR just one IRQ */ /* * For XLS PCIe, there is an IRQ per Link, find out which * link the device is on to assign interrupts - */ - if (dev->bus->self == NULL) + */ + lnk = xls_get_pcie_link(dev); + if (lnk == NULL) return 0; - switch (dev->bus->self->devfn) { - case 0x0: + switch (PCI_SLOT(lnk->devfn)) { + case 0: return PIC_PCIE_LINK0_IRQ; - case 0x8: + case 1: return PIC_PCIE_LINK1_IRQ; - case 0x10: + case 2: if (nlm_chip_is_xls_b()) return PIC_PCIE_XLSB0_LINK2_IRQ; else return PIC_PCIE_LINK2_IRQ; - case 0x18: + case 3: if (nlm_chip_is_xls_b()) return PIC_PCIE_XLSB0_LINK3_IRQ; else return PIC_PCIE_LINK3_IRQ; } - WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn); + WARN(1, "Unexpected devfn %d\n", lnk->devfn); return 0; } @@ -202,7 +223,27 @@ void arch_teardown_msi_irq(unsigned int irq) int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) { struct msi_msg msg; + struct pci_dev *lnk; int irq, ret; + u16 val; + + /* MSI not supported on XLR */ + if (!nlm_chip_is_xls()) + return 1; + + /* + * Enable MSI on the XLS PCIe controller bridge which was disabled + * at enumeration, the bridge MSI capability is at 0x50 + */ + lnk = xls_get_pcie_link(dev); + if (lnk == NULL) + return 1; + + pci_read_config_word(lnk, 0x50 + PCI_MSI_FLAGS, &val); + if ((val & PCI_MSI_FLAGS_ENABLE) == 0) { + val |= PCI_MSI_FLAGS_ENABLE; + pci_write_config_word(lnk, 0x50 + PCI_MSI_FLAGS, val); + } irq = get_irq_vector(dev); if (irq <= 0) @@ -327,7 +368,7 @@ static int __init pcibios_init(void) } } else { /* XLR PCI controller ACK */ - irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, xlr_pci_ack); + irq_set_handler_data(PIC_PCIX_IRQ, xlr_pci_ack); } return 0; diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c index b71fae231049..5edab2bc6fc0 100644 --- a/arch/mips/pmc-sierra/yosemite/smp.c +++ b/arch/mips/pmc-sierra/yosemite/smp.c @@ -115,11 +115,11 @@ static void yos_send_ipi_mask(const struct cpumask *mask, unsigned int action) */ static void __cpuinit yos_init_secondary(void) { - set_c0_status(ST0_CO | ST0_IE | ST0_IM); } static void __cpuinit yos_smp_finish(void) { + set_c0_status(ST0_CO | ST0_IM | ST0_IE); } /* Hook for after all CPUs are online */ diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c index 0a170e0ffeaa..7773f3d956b0 100644 --- a/arch/mips/powertv/asic/asic-calliope.c +++ b/arch/mips/powertv/asic/asic-calliope.c @@ -28,7 +28,7 @@ #define CALLIOPE_ADDR(x) (CALLIOPE_IO_BASE + (x)) -const struct register_map calliope_register_map __initdata = { +const struct register_map calliope_register_map __initconst = { .eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)}, .eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)}, .eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)}, diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c index bbc0c122be5e..da076db7b7ed 100644 --- a/arch/mips/powertv/asic/asic-cronus.c +++ b/arch/mips/powertv/asic/asic-cronus.c @@ -28,7 +28,7 @@ #define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x)) -const struct register_map cronus_register_map __initdata = { +const struct register_map cronus_register_map __initconst = { .eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)}, .eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)}, .eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)}, diff --git a/arch/mips/powertv/asic/asic-gaia.c b/arch/mips/powertv/asic/asic-gaia.c index 91dda682752c..47683b370e74 100644 --- a/arch/mips/powertv/asic/asic-gaia.c +++ b/arch/mips/powertv/asic/asic-gaia.c @@ -23,7 +23,7 @@ #include #include -const struct register_map gaia_register_map __initdata = { +const struct register_map gaia_register_map __initconst = { .eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000}, .eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038}, .eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C}, diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c index 4a05bb096476..6ff4b10f09da 100644 --- a/arch/mips/powertv/asic/asic-zeus.c +++ b/arch/mips/powertv/asic/asic-zeus.c @@ -28,7 +28,7 @@ #define ZEUS_ADDR(x) (ZEUS_IO_BASE + (x)) -const struct register_map zeus_register_map __initdata = { +const struct register_map zeus_register_map __initconst = { .eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)}, .eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)}, .eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)}, diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c index 682efb0c108d..64eb71b15280 100644 --- a/arch/mips/txx9/generic/pci.c +++ b/arch/mips/txx9/generic/pci.c @@ -269,7 +269,7 @@ txx9_i8259_irq_setup(int irq) return err; } -static void __init quirk_slc90e66_bridge(struct pci_dev *dev) +static void __devinit quirk_slc90e66_bridge(struct pci_dev *dev) { int irq; /* PCI/ISA Bridge interrupt */ u8 reg_64; diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h index 55b79ef10028..44251b974f1d 100644 --- a/arch/mn10300/include/asm/ptrace.h +++ b/arch/mn10300/include/asm/ptrace.h @@ -81,9 +81,6 @@ struct pt_regs { #define PTRACE_GETFPREGS 14 #define PTRACE_SETFPREGS 15 -/* options set using PTRACE_SETOPTIONS */ -#define PTRACE_O_TRACESYSGOOD 0x00000001 - #ifdef __KERNEL__ #define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL) diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h index 08251d6f6b11..ac519bbd42ff 100644 --- a/arch/mn10300/include/asm/thread_info.h +++ b/arch/mn10300/include/asm/thread_info.h @@ -123,7 +123,7 @@ static inline unsigned long current_stack_pointer(void) } #ifndef CONFIG_KGDB -void arch_release_thread_info(struct thread_info *ti) +void arch_release_thread_info(struct thread_info *ti); #endif #define get_thread_info(ti) get_task_struct((ti)->task) #define put_thread_info(ti) put_task_struct((ti)->task) diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h index bd4e90dfe6c2..f8e66425cbf8 100644 --- a/arch/mn10300/include/asm/timex.h +++ b/arch/mn10300/include/asm/timex.h @@ -11,7 +11,6 @@ #ifndef _ASM_TIMEX_H #define _ASM_TIMEX_H -#include #include #define TICK_SIZE (tick_nsec / 1000) @@ -30,16 +29,6 @@ static inline cycles_t get_cycles(void) extern int init_clockevents(void); extern int init_clocksource(void); -static inline void setup_jiffies_interrupt(int irq, - struct irqaction *action) -{ - u16 tmp; - setup_irq(irq, action); - set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL)); - GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; - tmp = GxICR(irq); -} - #endif /* __KERNEL__ */ #endif /* _ASM_TIMEX_H */ diff --git a/arch/mn10300/kernel/cevt-mn10300.c b/arch/mn10300/kernel/cevt-mn10300.c index 69cae0260786..ccce35e3e179 100644 --- a/arch/mn10300/kernel/cevt-mn10300.c +++ b/arch/mn10300/kernel/cevt-mn10300.c @@ -70,6 +70,16 @@ static void event_handler(struct clock_event_device *dev) { } +static inline void setup_jiffies_interrupt(int irq, + struct irqaction *action) +{ + u16 tmp; + setup_irq(irq, action); + set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL)); + GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; + tmp = GxICR(irq); +} + int __init init_clockevents(void) { struct clock_event_device *cd; diff --git a/arch/mn10300/kernel/internal.h b/arch/mn10300/kernel/internal.h index a5ac755dd69f..2df440105a80 100644 --- a/arch/mn10300/kernel/internal.h +++ b/arch/mn10300/kernel/internal.h @@ -9,6 +9,8 @@ * 2 of the Licence, or (at your option) any later version. */ +#include + struct clocksource; struct clock_event_device; diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index 2381df83bd00..35932a8de8b8 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -170,9 +170,9 @@ mn10300_cpupic_setaffinity(struct irq_data *d, const struct cpumask *mask, case SC1TXIRQ: #ifdef CONFIG_MN10300_TTYSM1_TIMER12 case TM12IRQ: -#elif CONFIG_MN10300_TTYSM1_TIMER9 +#elif defined(CONFIG_MN10300_TTYSM1_TIMER9) case TM9IRQ: -#elif CONFIG_MN10300_TTYSM1_TIMER3 +#elif defined(CONFIG_MN10300_TTYSM1_TIMER3) case TM3IRQ: #endif /* CONFIG_MN10300_TTYSM1_TIMER12 */ #endif /* CONFIG_MN10300_TTYSM1 */ diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c index 6ab0bee2a54f..4d584ae29ae1 100644 --- a/arch/mn10300/kernel/signal.c +++ b/arch/mn10300/kernel/signal.c @@ -459,10 +459,11 @@ static int handle_signal(int sig, else ret = setup_frame(sig, ka, oldset, regs); if (ret) - return; + return ret; signal_delivered(sig, info, ka, regs, - test_thread_flag(TIF_SINGLESTEP)); + test_thread_flag(TIF_SINGLESTEP)); + return 0; } /* diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index 94a9c6d53e1b..b900e5afa0ae 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c index 159acb02cfd4..e244ebe637e1 100644 --- a/arch/mn10300/mm/dma-alloc.c +++ b/arch/mn10300/mm/dma-alloc.c @@ -15,6 +15,7 @@ #include #include #include +#include #include static unsigned long pci_sram_allocated = 0xbc000000; diff --git a/arch/mn10300/unit-asb2303/include/unit/timex.h b/arch/mn10300/unit-asb2303/include/unit/timex.h index cc18fe7d8b90..c37f9832cf17 100644 --- a/arch/mn10300/unit-asb2303/include/unit/timex.h +++ b/arch/mn10300/unit-asb2303/include/unit/timex.h @@ -11,10 +11,6 @@ #ifndef _ASM_UNIT_TIMEX_H #define _ASM_UNIT_TIMEX_H -#ifndef __ASSEMBLY__ -#include -#endif /* __ASSEMBLY__ */ - #include #include #include diff --git a/arch/mn10300/unit-asb2303/smc91111.c b/arch/mn10300/unit-asb2303/smc91111.c index 43c246439413..53677694b165 100644 --- a/arch/mn10300/unit-asb2303/smc91111.c +++ b/arch/mn10300/unit-asb2303/smc91111.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h index 758af30d1a16..4cefc224f448 100644 --- a/arch/mn10300/unit-asb2305/include/unit/timex.h +++ b/arch/mn10300/unit-asb2305/include/unit/timex.h @@ -11,10 +11,6 @@ #ifndef _ASM_UNIT_TIMEX_H #define _ASM_UNIT_TIMEX_H -#ifndef __ASSEMBLY__ -#include -#endif /* __ASSEMBLY__ */ - #include #include #include diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c index e1becd6b7571..bc4adfaf815c 100644 --- a/arch/mn10300/unit-asb2305/unit-init.c +++ b/arch/mn10300/unit-asb2305/unit-init.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/mn10300/unit-asb2364/include/unit/timex.h b/arch/mn10300/unit-asb2364/include/unit/timex.h index ddb7ed010706..42f32db75087 100644 --- a/arch/mn10300/unit-asb2364/include/unit/timex.h +++ b/arch/mn10300/unit-asb2364/include/unit/timex.h @@ -11,10 +11,6 @@ #ifndef _ASM_UNIT_TIMEX_H #define _ASM_UNIT_TIMEX_H -#ifndef __ASSEMBLY__ -#include -#endif /* __ASSEMBLY__ */ - #include #include #include diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index c9aac24b02e2..0554ab062bdc 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -86,8 +86,8 @@ static inline bool arch_irqs_disabled(void) } #ifdef CONFIG_PPC_BOOK3E -#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory"); -#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory"); +#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory") +#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory") #else #define __hard_irq_enable() __mtmsrd(local_paca->kernel_msr | MSR_EE, 1) #define __hard_irq_disable() __mtmsrd(local_paca->kernel_msr, 1) @@ -100,6 +100,14 @@ static inline void hard_irq_disable(void) get_paca()->irq_happened |= PACA_IRQ_HARD_DIS; } +/* include/linux/interrupt.h needs hard_irq_disable to be a macro */ +#define hard_irq_disable hard_irq_disable + +static inline bool lazy_irq_pending(void) +{ + return !!(get_paca()->irq_happened & ~PACA_IRQ_HARD_DIS); +} + /* * This is called by asynchronous interrupts to conditionally * re-enable hard interrupts when soft-disabled after having @@ -117,6 +125,8 @@ static inline bool arch_irq_disabled_regs(struct pt_regs *regs) return !regs->softe; } +extern bool prep_irq_for_idle(void); + #else /* CONFIG_PPC64 */ #define SET_MSR_EE(x) mtmsr(x) diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index ed1718feb9d9..5971c85df136 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -558,27 +558,54 @@ _GLOBAL(ret_from_except_lite) mtmsrd r10,1 /* Update machine state */ #endif /* CONFIG_PPC_BOOK3E */ -#ifdef CONFIG_PREEMPT clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */ - li r0,_TIF_NEED_RESCHED /* bits to check */ ld r3,_MSR(r1) ld r4,TI_FLAGS(r9) - /* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */ - rlwimi r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING - and. r0,r4,r0 /* check NEED_RESCHED and maybe SIGPENDING */ - bne do_work - -#else /* !CONFIG_PREEMPT */ - ld r3,_MSR(r1) /* Returning to user mode? */ andi. r3,r3,MSR_PR - beq restore /* if not, just restore regs and return */ + beq resume_kernel /* Check current_thread_info()->flags */ + andi. r0,r4,_TIF_USER_WORK_MASK + beq restore + + andi. r0,r4,_TIF_NEED_RESCHED + beq 1f + bl .restore_interrupts + bl .schedule + b .ret_from_except_lite + +1: bl .save_nvgprs + bl .restore_interrupts + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_notify_resume + b .ret_from_except + +resume_kernel: +#ifdef CONFIG_PREEMPT + /* Check if we need to preempt */ + andi. r0,r4,_TIF_NEED_RESCHED + beq+ restore + /* Check that preempt_count() == 0 and interrupts are enabled */ + lwz r8,TI_PREEMPT(r9) + cmpwi cr1,r8,0 + ld r0,SOFTE(r1) + cmpdi r0,0 + crandc eq,cr1*4+eq,eq + bne restore + + /* + * Here we are preempting the current task. We want to make + * sure we are soft-disabled first + */ + SOFT_DISABLE_INTS(r3,r4) +1: bl .preempt_schedule_irq + + /* Re-test flags and eventually loop */ clrrdi r9,r1,THREAD_SHIFT ld r4,TI_FLAGS(r9) - andi. r0,r4,_TIF_USER_WORK_MASK - bne do_work -#endif /* !CONFIG_PREEMPT */ + andi. r0,r4,_TIF_NEED_RESCHED + bne 1b +#endif /* CONFIG_PREEMPT */ .globl fast_exc_return_irq fast_exc_return_irq: @@ -759,50 +786,6 @@ restore_check_irq_replay: #endif /* CONFIG_PPC_BOOK3E */ 1: b .ret_from_except /* What else to do here ? */ - - -3: -do_work: -#ifdef CONFIG_PREEMPT - andi. r0,r3,MSR_PR /* Returning to user mode? */ - bne user_work - /* Check that preempt_count() == 0 and interrupts are enabled */ - lwz r8,TI_PREEMPT(r9) - cmpwi cr1,r8,0 - ld r0,SOFTE(r1) - cmpdi r0,0 - crandc eq,cr1*4+eq,eq - bne restore - - /* - * Here we are preempting the current task. We want to make - * sure we are soft-disabled first - */ - SOFT_DISABLE_INTS(r3,r4) -1: bl .preempt_schedule_irq - - /* Re-test flags and eventually loop */ - clrrdi r9,r1,THREAD_SHIFT - ld r4,TI_FLAGS(r9) - andi. r0,r4,_TIF_NEED_RESCHED - bne 1b - b restore - -user_work: -#endif /* CONFIG_PREEMPT */ - - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - bl .restore_interrupts - bl .schedule - b .ret_from_except_lite - -1: bl .save_nvgprs - bl .restore_interrupts - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_notify_resume - b .ret_from_except - unrecov_restore: addi r3,r1,STACK_FRAME_OVERHEAD bl .unrecoverable_exception diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 7835a5e1ea5f..1f017bb7a7ce 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -229,7 +229,7 @@ notrace void arch_local_irq_restore(unsigned long en) */ if (unlikely(irq_happened != PACA_IRQ_HARD_DIS)) __hard_irq_disable(); -#ifdef CONFIG_TRACE_IRQFLAG +#ifdef CONFIG_TRACE_IRQFLAGS else { /* * We should already be hard disabled here. We had bugs @@ -277,7 +277,7 @@ EXPORT_SYMBOL(arch_local_irq_restore); * NOTE: This is called with interrupts hard disabled but not marked * as such in paca->irq_happened, so we need to resync this. */ -void restore_interrupts(void) +void notrace restore_interrupts(void) { if (irqs_disabled()) { local_paca->irq_happened |= PACA_IRQ_HARD_DIS; @@ -286,6 +286,52 @@ void restore_interrupts(void) __hard_irq_enable(); } +/* + * This is a helper to use when about to go into idle low-power + * when the latter has the side effect of re-enabling interrupts + * (such as calling H_CEDE under pHyp). + * + * You call this function with interrupts soft-disabled (this is + * already the case when ppc_md.power_save is called). The function + * will return whether to enter power save or just return. + * + * In the former case, it will have notified lockdep of interrupts + * being re-enabled and generally sanitized the lazy irq state, + * and in the latter case it will leave with interrupts hard + * disabled and marked as such, so the local_irq_enable() call + * in cpu_idle() will properly re-enable everything. + */ +bool prep_irq_for_idle(void) +{ + /* + * First we need to hard disable to ensure no interrupt + * occurs before we effectively enter the low power state + */ + hard_irq_disable(); + + /* + * If anything happened while we were soft-disabled, + * we return now and do not enter the low power state. + */ + if (lazy_irq_pending()) + return false; + + /* Tell lockdep we are about to re-enable */ + trace_hardirqs_on(); + + /* + * Mark interrupts as soft-enabled and clear the + * PACA_IRQ_HARD_DIS from the pending mask since we + * are about to hard enable as well as a side effect + * of entering the low power state. + */ + local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS; + local_paca->soft_enabled = 1; + + /* Tell the caller to enter the low power state */ + return true; +} + #endif /* CONFIG_PPC64 */ int arch_show_interrupts(struct seq_file *p, int prec) diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 1b488e5305c5..0794a3017b1b 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -1312,7 +1312,7 @@ static struct opal_secondary_data { extern char opal_secondary_entry; -static void prom_query_opal(void) +static void __init prom_query_opal(void) { long rc; @@ -1436,7 +1436,7 @@ static void __init prom_opal_hold_cpus(void) prom_debug("prom_opal_hold_cpus: end...\n"); } -static void prom_opal_takeover(void) +static void __init prom_opal_takeover(void) { struct opal_secondary_data *data = &RELOC(opal_secondary_data); struct opal_takeover_args *args = &data->args; diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index c6af1d623839..3abe1b86e583 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -268,24 +268,45 @@ static unsigned long do_h_register_vpa(struct kvm_vcpu *vcpu, return err; } -static void kvmppc_update_vpa(struct kvm *kvm, struct kvmppc_vpa *vpap) +static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap) { + struct kvm *kvm = vcpu->kvm; void *va; unsigned long nb; + unsigned long gpa; + + /* + * We need to pin the page pointed to by vpap->next_gpa, + * but we can't call kvmppc_pin_guest_page under the lock + * as it does get_user_pages() and down_read(). So we + * have to drop the lock, pin the page, then get the lock + * again and check that a new area didn't get registered + * in the meantime. + */ + for (;;) { + gpa = vpap->next_gpa; + spin_unlock(&vcpu->arch.vpa_update_lock); + va = NULL; + nb = 0; + if (gpa) + va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb); + spin_lock(&vcpu->arch.vpa_update_lock); + if (gpa == vpap->next_gpa) + break; + /* sigh... unpin that one and try again */ + if (va) + kvmppc_unpin_guest_page(kvm, va); + } vpap->update_pending = 0; - va = NULL; - if (vpap->next_gpa) { - va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb); - if (nb < vpap->len) { - /* - * If it's now too short, it must be that userspace - * has changed the mappings underlying guest memory, - * so unregister the region. - */ - kvmppc_unpin_guest_page(kvm, va); - va = NULL; - } + if (va && nb < vpap->len) { + /* + * If it's now too short, it must be that userspace + * has changed the mappings underlying guest memory, + * so unregister the region. + */ + kvmppc_unpin_guest_page(kvm, va); + va = NULL; } if (vpap->pinned_addr) kvmppc_unpin_guest_page(kvm, vpap->pinned_addr); @@ -296,20 +317,18 @@ static void kvmppc_update_vpa(struct kvm *kvm, struct kvmppc_vpa *vpap) static void kvmppc_update_vpas(struct kvm_vcpu *vcpu) { - struct kvm *kvm = vcpu->kvm; - spin_lock(&vcpu->arch.vpa_update_lock); if (vcpu->arch.vpa.update_pending) { - kvmppc_update_vpa(kvm, &vcpu->arch.vpa); + kvmppc_update_vpa(vcpu, &vcpu->arch.vpa); init_vpa(vcpu, vcpu->arch.vpa.pinned_addr); } if (vcpu->arch.dtl.update_pending) { - kvmppc_update_vpa(kvm, &vcpu->arch.dtl); + kvmppc_update_vpa(vcpu, &vcpu->arch.dtl); vcpu->arch.dtl_ptr = vcpu->arch.dtl.pinned_addr; vcpu->arch.dtl_index = 0; } if (vcpu->arch.slb_shadow.update_pending) - kvmppc_update_vpa(kvm, &vcpu->arch.slb_shadow); + kvmppc_update_vpa(vcpu, &vcpu->arch.slb_shadow); spin_unlock(&vcpu->arch.vpa_update_lock); } @@ -800,12 +819,39 @@ static int kvmppc_run_core(struct kvmppc_vcore *vc) struct kvm_vcpu *vcpu, *vcpu0, *vnext; long ret; u64 now; - int ptid, i; + int ptid, i, need_vpa_update; /* don't start if any threads have a signal pending */ - list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) + need_vpa_update = 0; + list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) { if (signal_pending(vcpu->arch.run_task)) return 0; + need_vpa_update |= vcpu->arch.vpa.update_pending | + vcpu->arch.slb_shadow.update_pending | + vcpu->arch.dtl.update_pending; + } + + /* + * Initialize *vc, in particular vc->vcore_state, so we can + * drop the vcore lock if necessary. + */ + vc->n_woken = 0; + vc->nap_count = 0; + vc->entry_exit_count = 0; + vc->vcore_state = VCORE_RUNNING; + vc->in_guest = 0; + vc->napping_threads = 0; + + /* + * Updating any of the vpas requires calling kvmppc_pin_guest_page, + * which can't be called with any spinlocks held. + */ + if (need_vpa_update) { + spin_unlock(&vc->lock); + list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) + kvmppc_update_vpas(vcpu); + spin_lock(&vc->lock); + } /* * Make sure we are running on thread 0, and that @@ -838,20 +884,10 @@ static int kvmppc_run_core(struct kvmppc_vcore *vc) if (vcpu->arch.ceded) vcpu->arch.ptid = ptid++; - vc->n_woken = 0; - vc->nap_count = 0; - vc->entry_exit_count = 0; - vc->vcore_state = VCORE_RUNNING; vc->stolen_tb += mftb() - vc->preempt_tb; - vc->in_guest = 0; vc->pcpu = smp_processor_id(); - vc->napping_threads = 0; list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) { kvmppc_start_thread(vcpu); - if (vcpu->arch.vpa.update_pending || - vcpu->arch.slb_shadow.update_pending || - vcpu->arch.dtl.update_pending) - kvmppc_update_vpas(vcpu); kvmppc_create_dtl_entry(vcpu, vc); } /* Grab any remaining hw threads so they can't go into the kernel */ diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index a84aafce2a12..a1044f43becd 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -810,7 +810,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201) lwz r3,VCORE_NAPPING_THREADS(r5) lwz r4,VCPU_PTID(r9) li r0,1 - sldi r0,r0,r4 + sld r0,r0,r4 andc. r3,r3,r0 /* no sense IPI'ing ourselves */ beq 43f mulli r4,r4,PACA_SIZE /* get paca for thread 0 */ diff --git a/arch/powerpc/kvm/book3s_pr_papr.c b/arch/powerpc/kvm/book3s_pr_papr.c index 3ff9013d6e79..ee02b30878ed 100644 --- a/arch/powerpc/kvm/book3s_pr_papr.c +++ b/arch/powerpc/kvm/book3s_pr_papr.c @@ -241,6 +241,7 @@ int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd) case H_PUT_TCE: return kvmppc_h_pr_put_tce(vcpu); case H_CEDE: + vcpu->arch.shared->msr |= MSR_EE; kvm_vcpu_block(vcpu); clear_bit(KVM_REQ_UNHALT, &vcpu->requests); vcpu->stat.halt_wakeup++; diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index b6edbb3b4a54..1e95556dc692 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -635,11 +635,11 @@ static inline int __init read_usm_ranges(const u32 **usm) */ static void __init parse_drconf_memory(struct device_node *memory) { - const u32 *dm, *usm; + const u32 *uninitialized_var(dm), *usm; unsigned int n, rc, ranges, is_kexec_kdump = 0; unsigned long lmb_size, base, size, sz; int nid; - struct assoc_arrays aa; + struct assoc_arrays aa = { .arrays = NULL }; n = of_get_drconf_memory(memory, &dm); if (!n) diff --git a/arch/powerpc/net/bpf_jit_64.S b/arch/powerpc/net/bpf_jit_64.S index 55ba3855a97f..7d3a3b5619a2 100644 --- a/arch/powerpc/net/bpf_jit_64.S +++ b/arch/powerpc/net/bpf_jit_64.S @@ -105,6 +105,7 @@ sk_load_byte_msh_positive_offset: mr r4, r_addr; \ li r6, SIZE; \ bl skb_copy_bits; \ + nop; \ /* R3 = 0 on success */ \ addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \ ld r0, 16(r1); \ @@ -156,6 +157,7 @@ bpf_slow_path_byte_msh: mr r4, r_addr; \ li r5, SIZE; \ bl bpf_internal_load_pointer_neg_helper; \ + nop; \ /* R3 != 0 on success */ \ addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \ ld r0, 16(r1); \ diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c index efdacc829576..d17e98bc0c10 100644 --- a/arch/powerpc/platforms/cell/pervasive.c +++ b/arch/powerpc/platforms/cell/pervasive.c @@ -42,11 +42,9 @@ static void cbe_power_save(void) { unsigned long ctrl, thread_switch_control; - /* - * We need to hard disable interrupts, the local_irq_enable() done by - * our caller upon return will hard re-enable. - */ - hard_irq_disable(); + /* Ensure our interrupt state is properly tracked */ + if (!prep_irq_for_idle()) + return; ctrl = mfspr(SPRN_CTRLF); @@ -81,6 +79,9 @@ static void cbe_power_save(void) */ ctrl &= ~(CTRL_RUNLATCH | CTRL_TE); mtspr(SPRN_CTRLT, ctrl); + + /* Re-enable interrupts in MSR */ + __hard_irq_enable(); } static int cbe_system_reset_exception(struct pt_regs *regs) diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 0915b1ad66ce..2d311c0caf8e 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -106,7 +106,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index, tcep++; } - if (tbl->it_type == TCE_PCI_SWINV_CREATE) + if (tbl->it_type & TCE_PCI_SWINV_CREATE) tce_invalidate_pSeries_sw(tbl, tces, tcep - 1); return 0; } @@ -121,7 +121,7 @@ static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages) while (npages--) *(tcep++) = 0; - if (tbl->it_type == TCE_PCI_SWINV_FREE) + if (tbl->it_type & TCE_PCI_SWINV_FREE) tce_invalidate_pSeries_sw(tbl, tces, tcep - 1); } diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c index 36f957f31842..8733a86ad52e 100644 --- a/arch/powerpc/platforms/pseries/nvram.c +++ b/arch/powerpc/platforms/pseries/nvram.c @@ -68,9 +68,7 @@ static const char *pseries_nvram_os_partitions[] = { }; static void oops_to_nvram(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *old_msgs, unsigned long old_len, - const char *new_msgs, unsigned long new_len); + enum kmsg_dump_reason reason); static struct kmsg_dumper nvram_kmsg_dumper = { .dump = oops_to_nvram @@ -503,28 +501,6 @@ int __init pSeries_nvram_init(void) return 0; } -/* - * Try to capture the last capture_len bytes of the printk buffer. Return - * the amount actually captured. - */ -static size_t capture_last_msgs(const char *old_msgs, size_t old_len, - const char *new_msgs, size_t new_len, - char *captured, size_t capture_len) -{ - if (new_len >= capture_len) { - memcpy(captured, new_msgs + (new_len - capture_len), - capture_len); - return capture_len; - } else { - /* Grab the end of old_msgs. */ - size_t old_tail_len = min(old_len, capture_len - new_len); - memcpy(captured, old_msgs + (old_len - old_tail_len), - old_tail_len); - memcpy(captured + old_tail_len, new_msgs, new_len); - return old_tail_len + new_len; - } -} - /* * Are we using the ibm,rtas-log for oops/panic reports? And if so, * would logging this oops/panic overwrite an RTAS event that rtas_errd @@ -541,27 +517,6 @@ static int clobbering_unread_rtas_event(void) NVRAM_RTAS_READ_TIMEOUT); } -/* Squeeze out each line's severity prefix. */ -static size_t elide_severities(char *buf, size_t len) -{ - char *in, *out, *buf_end = buf + len; - /* Assume a at the very beginning marks the start of a line. */ - int newline = 1; - - in = out = buf; - while (in < buf_end) { - if (newline && in+3 <= buf_end && - *in == '<' && isdigit(in[1]) && in[2] == '>') { - in += 3; - newline = 0; - } else { - newline = (*in == '\n'); - *out++ = *in++; - } - } - return out - buf; -} - /* Derived from logfs_compress() */ static int nvram_compress(const void *in, void *out, size_t inlen, size_t outlen) @@ -619,9 +574,7 @@ static int zip_oops(size_t text_len) * partition. If that's too much, go back and capture uncompressed text. */ static void oops_to_nvram(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *old_msgs, unsigned long old_len, - const char *new_msgs, unsigned long new_len) + enum kmsg_dump_reason reason) { static unsigned int oops_count = 0; static bool panicking = false; @@ -660,14 +613,14 @@ static void oops_to_nvram(struct kmsg_dumper *dumper, return; if (big_oops_buf) { - text_len = capture_last_msgs(old_msgs, old_len, - new_msgs, new_len, big_oops_buf, big_oops_buf_sz); - text_len = elide_severities(big_oops_buf, text_len); + kmsg_dump_get_buffer(dumper, false, + big_oops_buf, big_oops_buf_sz, &text_len); rc = zip_oops(text_len); } if (rc != 0) { - text_len = capture_last_msgs(old_msgs, old_len, - new_msgs, new_len, oops_data, oops_data_sz); + kmsg_dump_rewind(dumper); + kmsg_dump_get_buffer(dumper, true, + oops_data, oops_data_sz, &text_len); err_type = ERR_TYPE_KERNEL_PANIC; *oops_len = (u16) text_len; } diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c index 41a34bc4a9a2..c71be66bd5dc 100644 --- a/arch/powerpc/platforms/pseries/processor_idle.c +++ b/arch/powerpc/platforms/pseries/processor_idle.c @@ -99,15 +99,18 @@ out: static void check_and_cede_processor(void) { /* - * Interrupts are soft-disabled at this point, - * but not hard disabled. So an interrupt might have - * occurred before entering NAP, and would be potentially - * lost (edge events, decrementer events, etc...) unless - * we first hard disable then check. + * Ensure our interrupt state is properly tracked, + * also checks if no interrupt has occurred while we + * were soft-disabled */ - hard_irq_disable(); - if (get_paca()->irq_happened == 0) + if (prep_irq_for_idle()) { cede_processor(); +#ifdef CONFIG_TRACE_IRQFLAGS + /* Ensure that H_CEDE returns with IRQs on */ + if (WARN_ON(!(mfmsr() & MSR_EE))) + __hard_irq_enable(); +#endif + } } static int dedicated_cede_loop(struct cpuidle_device *dev, diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 0f3ab06d2222..eab3492a45c5 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -971,7 +971,7 @@ static int cpu_cmd(void) /* print cpus waiting or in xmon */ printf("cpus stopped:"); count = 0; - for (cpu = 0; cpu < NR_CPUS; ++cpu) { + for_each_possible_cpu(cpu) { if (cpumask_test_cpu(cpu, &cpus_in_xmon)) { if (count == 0) printf(" %x", cpu); diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 99bcd0ee838d..31d9db7913e4 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -32,6 +32,8 @@ config SUPERH select GENERIC_SMP_IDLE_THREAD select GENERIC_CLOCKEVENTS select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER help The SuperH is a RISC processor targeted for use in embedded systems and consumer electronics; it was also used in the Sega Dreamcast diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 46edf070da1c..aed701c7b11b 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -9,6 +9,12 @@ # License. See the file "COPYING" in the main directory of this archive # for more details. # +ifneq ($(SUBARCH),$(ARCH)) + ifeq ($(CROSS_COMPILE),) + CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux- $(UTS_MACHINE)-linux-gnu- $(UTS_MACHINE)-unknown-linux-gnu-) + endif +endif + isa-y := any isa-$(CONFIG_SH_DSP) := sh isa-$(CONFIG_CPU_SH2) := sh2 @@ -106,19 +112,13 @@ LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \ KBUILD_DEFCONFIG := cayman_defconfig endif -ifneq ($(SUBARCH),$(ARCH)) - ifeq ($(CROSS_COMPILE),) - CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux- $(UTS_MACHINE)-linux-gnu- $(UTS_MACHINE)-unknown-linux-gnu-) - endif -endif - ifdef CONFIG_CPU_LITTLE_ENDIAN ld-bfd := elf32-$(UTS_MACHINE)-linux -LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64' --oformat $(ld-bfd) +LDFLAGS_vmlinux += --defsym jiffies=jiffies_64 --oformat $(ld-bfd) LDFLAGS += -EL else ld-bfd := elf32-$(UTS_MACHINE)big-linux -LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' --oformat $(ld-bfd) +LDFLAGS_vmlinux += --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd) LDFLAGS += -EB endif diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 158c9176e42a..43a179ce9afc 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -201,8 +201,8 @@ static struct resource kfr2r09_usb0_gadget_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evtirq(0xa20), - .end = evtirq(0xa20), + .start = evt2irq(0xa20), + .end = evt2irq(0xa20), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c index c045142f7338..9e702f2f8045 100644 --- a/arch/sh/drivers/pci/pcie-sh7786.c +++ b/arch/sh/drivers/pci/pcie-sh7786.c @@ -239,7 +239,7 @@ static int __init pcie_clk_init(struct sh7786_pcie_port *port) clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR); clk->enable_bit = BITS_CKE; - ret = sh_clk_mstp32_register(clk, 1); + ret = sh_clk_mstp_register(clk, 1); if (unlikely(ret < 0)) goto err_phy; diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild index 7beb42322f60..7b673ddcd555 100644 --- a/arch/sh/include/asm/Kbuild +++ b/arch/sh/include/asm/Kbuild @@ -1,5 +1,39 @@ include include/asm-generic/Kbuild.asm +generic-y += bitsperlong.h +generic-y += cputime.h +generic-y += current.h +generic-y += delay.h +generic-y += div64.h +generic-y += emergency-restart.h +generic-y += errno.h +generic-y += fcntl.h +generic-y += ioctl.h +generic-y += ipcbuf.h +generic-y += irq_regs.h +generic-y += kvm_para.h +generic-y += local.h +generic-y += local64.h +generic-y += param.h +generic-y += parport.h +generic-y += percpu.h +generic-y += poll.h +generic-y += mman.h +generic-y += msgbuf.h +generic-y += resource.h +generic-y += scatterlist.h +generic-y += sembuf.h +generic-y += serial.h +generic-y += shmbuf.h +generic-y += siginfo.h +generic-y += sizes.h +generic-y += socket.h +generic-y += statfs.h +generic-y += termbits.h +generic-y += termios.h +generic-y += ucontext.h +generic-y += xor.h + header-y += cachectl.h header-y += cpu-features.h header-y += hw_breakpoint.h diff --git a/arch/sh/include/asm/bitsperlong.h b/arch/sh/include/asm/bitsperlong.h deleted file mode 100644 index 6dc0bb0c13b2..000000000000 --- a/arch/sh/include/asm/bitsperlong.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/cputime.h b/arch/sh/include/asm/cputime.h deleted file mode 100644 index 6ca395d1393e..000000000000 --- a/arch/sh/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __SH_CPUTIME_H -#define __SH_CPUTIME_H - -#include - -#endif /* __SH_CPUTIME_H */ diff --git a/arch/sh/include/asm/current.h b/arch/sh/include/asm/current.h deleted file mode 100644 index 4c51401b5537..000000000000 --- a/arch/sh/include/asm/current.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/delay.h b/arch/sh/include/asm/delay.h deleted file mode 100644 index 9670e127b7b2..000000000000 --- a/arch/sh/include/asm/delay.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/div64.h b/arch/sh/include/asm/div64.h deleted file mode 100644 index 6cd978cefb28..000000000000 --- a/arch/sh/include/asm/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c48e42e..000000000000 --- a/arch/sh/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/sh/include/asm/errno.h b/arch/sh/include/asm/errno.h deleted file mode 100644 index 51cf6f9cebb8..000000000000 --- a/arch/sh/include/asm/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_ERRNO_H -#define __ASM_SH_ERRNO_H - -#include - -#endif /* __ASM_SH_ERRNO_H */ diff --git a/arch/sh/include/asm/fcntl.h b/arch/sh/include/asm/fcntl.h deleted file mode 100644 index 46ab12db5739..000000000000 --- a/arch/sh/include/asm/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/io_noioport.h b/arch/sh/include/asm/io_noioport.h index e136d28d1d2e..4d48f1436a63 100644 --- a/arch/sh/include/asm/io_noioport.h +++ b/arch/sh/include/asm/io_noioport.h @@ -19,9 +19,20 @@ static inline u32 inl(unsigned long addr) return -1; } -#define outb(x, y) BUG() -#define outw(x, y) BUG() -#define outl(x, y) BUG() +static inline void outb(unsigned char x, unsigned long port) +{ + BUG(); +} + +static inline void outw(unsigned short x, unsigned long port) +{ + BUG(); +} + +static inline void outl(unsigned int x, unsigned long port) +{ + BUG(); +} #define inb_p(addr) inb(addr) #define inw_p(addr) inw(addr) diff --git a/arch/sh/include/asm/ioctl.h b/arch/sh/include/asm/ioctl.h deleted file mode 100644 index b279fe06dfe5..000000000000 --- a/arch/sh/include/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h deleted file mode 100644 index 84c7e51cb6d0..000000000000 --- a/arch/sh/include/asm/ipcbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/irq_regs.h b/arch/sh/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b70270..000000000000 --- a/arch/sh/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/kvm_para.h b/arch/sh/include/asm/kvm_para.h deleted file mode 100644 index 14fab8f0b957..000000000000 --- a/arch/sh/include/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/local.h b/arch/sh/include/asm/local.h deleted file mode 100644 index 9ed9b9cb459a..000000000000 --- a/arch/sh/include/asm/local.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_SH_LOCAL_H -#define __ASM_SH_LOCAL_H - -#include - -#endif /* __ASM_SH_LOCAL_H */ - diff --git a/arch/sh/include/asm/local64.h b/arch/sh/include/asm/local64.h deleted file mode 100644 index 36c93b5cc239..000000000000 --- a/arch/sh/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/mman.h b/arch/sh/include/asm/mman.h deleted file mode 100644 index 8eebf89f5ab1..000000000000 --- a/arch/sh/include/asm/mman.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/msgbuf.h b/arch/sh/include/asm/msgbuf.h deleted file mode 100644 index 809134c644a6..000000000000 --- a/arch/sh/include/asm/msgbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/param.h b/arch/sh/include/asm/param.h deleted file mode 100644 index 965d45427975..000000000000 --- a/arch/sh/include/asm/param.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/parport.h b/arch/sh/include/asm/parport.h deleted file mode 100644 index cf252af64590..000000000000 --- a/arch/sh/include/asm/parport.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/percpu.h b/arch/sh/include/asm/percpu.h deleted file mode 100644 index 4db4b39a4399..000000000000 --- a/arch/sh/include/asm/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARCH_SH_PERCPU -#define __ARCH_SH_PERCPU - -#include - -#endif /* __ARCH_SH_PERCPU */ diff --git a/arch/sh/include/asm/poll.h b/arch/sh/include/asm/poll.h deleted file mode 100644 index c98509d3149e..000000000000 --- a/arch/sh/include/asm/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/resource.h b/arch/sh/include/asm/resource.h deleted file mode 100644 index 9c2499a86ec0..000000000000 --- a/arch/sh/include/asm/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_RESOURCE_H -#define __ASM_SH_RESOURCE_H - -#include - -#endif /* __ASM_SH_RESOURCE_H */ diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h deleted file mode 100644 index 98dfc3510f10..000000000000 --- a/arch/sh/include/asm/scatterlist.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_SCATTERLIST_H -#define __ASM_SH_SCATTERLIST_H - -#include - -#endif /* __ASM_SH_SCATTERLIST_H */ diff --git a/arch/sh/include/asm/sembuf.h b/arch/sh/include/asm/sembuf.h deleted file mode 100644 index 7673b83cfef7..000000000000 --- a/arch/sh/include/asm/sembuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h deleted file mode 100644 index a0cb0caff152..000000000000 --- a/arch/sh/include/asm/serial.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/shmbuf.h b/arch/sh/include/asm/shmbuf.h deleted file mode 100644 index 83c05fc2de38..000000000000 --- a/arch/sh/include/asm/shmbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/siginfo.h b/arch/sh/include/asm/siginfo.h deleted file mode 100644 index 813040ed68a9..000000000000 --- a/arch/sh/include/asm/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_SIGINFO_H -#define __ASM_SH_SIGINFO_H - -#include - -#endif /* __ASM_SH_SIGINFO_H */ diff --git a/arch/sh/include/asm/sizes.h b/arch/sh/include/asm/sizes.h deleted file mode 100644 index dd248c2e1085..000000000000 --- a/arch/sh/include/asm/sizes.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/socket.h b/arch/sh/include/asm/socket.h deleted file mode 100644 index 6b71384b9d8b..000000000000 --- a/arch/sh/include/asm/socket.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/statfs.h b/arch/sh/include/asm/statfs.h deleted file mode 100644 index 9202a023328f..000000000000 --- a/arch/sh/include/asm/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_STATFS_H -#define __ASM_SH_STATFS_H - -#include - -#endif /* __ASM_SH_STATFS_H */ diff --git a/arch/sh/include/asm/termbits.h b/arch/sh/include/asm/termbits.h deleted file mode 100644 index 3935b106de79..000000000000 --- a/arch/sh/include/asm/termbits.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/termios.h b/arch/sh/include/asm/termios.h deleted file mode 100644 index 280d78a9d966..000000000000 --- a/arch/sh/include/asm/termios.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h index 050f221fa898..8698a80ed00c 100644 --- a/arch/sh/include/asm/uaccess.h +++ b/arch/sh/include/asm/uaccess.h @@ -25,6 +25,8 @@ (__chk_user_ptr(addr), \ __access_ok((unsigned long __force)(addr), (size))) +#define user_addr_max() (current_thread_info()->addr_limit.seg) + /* * Uh, these should become the main single-value transfer routines ... * They automatically use the right size if we just have the right @@ -100,6 +102,11 @@ struct __large_struct { unsigned long buf[100]; }; # include "uaccess_64.h" #endif +extern long strncpy_from_user(char *dest, const char __user *src, long count); + +extern __must_check long strlen_user(const char __user *str); +extern __must_check long strnlen_user(const char __user *str, long n); + /* Generic arbitrary sized copy. */ /* Return the number of bytes NOT copied */ __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); @@ -137,37 +144,6 @@ __kernel_size_t __clear_user(void *addr, __kernel_size_t size); __cl_size; \ }) -/** - * strncpy_from_user: - Copy a NUL terminated string from userspace. - * @dst: Destination address, in kernel space. This buffer must be at - * least @count bytes long. - * @src: Source address, in user space. - * @count: Maximum number of bytes to copy, including the trailing NUL. - * - * Copies a NUL-terminated string from userspace to kernel space. - * - * On success, returns the length of the string (not including the trailing - * NUL). - * - * If access to userspace fails, returns -EFAULT (some data may have been - * copied). - * - * If @count is smaller than the length of the string, copies @count bytes - * and returns @count. - */ -#define strncpy_from_user(dest,src,count) \ -({ \ - unsigned long __sfu_src = (unsigned long)(src); \ - int __sfu_count = (int)(count); \ - long __sfu_res = -EFAULT; \ - \ - if (__access_ok(__sfu_src, __sfu_count)) \ - __sfu_res = __strncpy_from_user((unsigned long)(dest), \ - __sfu_src, __sfu_count); \ - \ - __sfu_res; \ -}) - static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n) { @@ -192,43 +168,6 @@ copy_to_user(void __user *to, const void *from, unsigned long n) return __copy_size; } -/** - * strnlen_user: - Get the size of a string in user space. - * @s: The string to measure. - * @n: The maximum valid length - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * If the string is too long, returns a value greater than @n. - */ -static inline long strnlen_user(const char __user *s, long n) -{ - if (!__addr_ok(s)) - return 0; - else - return __strnlen_user(s, n); -} - -/** - * strlen_user: - Get the size of a string in user space. - * @str: The string to measure. - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * - * If there is a limit on the length of a valid string, you may wish to - * consider using strnlen_user() instead. - */ -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) - /* * The exception table consists of pairs of addresses: the first is the * address of an instruction that is allowed to fault, and the second is diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h index ae0d24f6653f..c0de7ee35ab7 100644 --- a/arch/sh/include/asm/uaccess_32.h +++ b/arch/sh/include/asm/uaccess_32.h @@ -170,79 +170,4 @@ __asm__ __volatile__( \ extern void __put_user_unknown(void); -static inline int -__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count) -{ - __kernel_size_t res; - unsigned long __dummy, _d, _s, _c; - - __asm__ __volatile__( - "9:\n" - "mov.b @%2+, %1\n\t" - "cmp/eq #0, %1\n\t" - "bt/s 2f\n" - "1:\n" - "mov.b %1, @%3\n\t" - "dt %4\n\t" - "bf/s 9b\n\t" - " add #1, %3\n\t" - "2:\n\t" - "sub %4, %0\n" - "3:\n" - ".section .fixup,\"ax\"\n" - "4:\n\t" - "mov.l 5f, %1\n\t" - "jmp @%1\n\t" - " mov %9, %0\n\t" - ".balign 4\n" - "5: .long 3b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .balign 4\n" - " .long 9b,4b\n" - ".previous" - : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c) - : "0" (__count), "2" (__src), "3" (__dest), "4" (__count), - "i" (-EFAULT) - : "memory", "t"); - - return res; -} - -/* - * Return the size of a string (including the ending 0 even when we have - * exceeded the maximum string length). - */ -static inline long __strnlen_user(const char __user *__s, long __n) -{ - unsigned long res; - unsigned long __dummy; - - __asm__ __volatile__( - "1:\t" - "mov.b @(%0,%3), %1\n\t" - "cmp/eq %4, %0\n\t" - "bt/s 2f\n\t" - " add #1, %0\n\t" - "tst %1, %1\n\t" - "bf 1b\n\t" - "2:\n" - ".section .fixup,\"ax\"\n" - "3:\n\t" - "mov.l 4f, %1\n\t" - "jmp @%1\n\t" - " mov #0, %0\n" - ".balign 4\n" - "4: .long 2b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .balign 4\n" - " .long 1b,3b\n" - ".previous" - : "=z" (res), "=&r" (__dummy) - : "0" (0), "r" (__s), "r" (__n) - : "t"); - return res; -} - #endif /* __ASM_SH_UACCESS_32_H */ diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h index 56fd20b8cdcc..2e07e0f40c6a 100644 --- a/arch/sh/include/asm/uaccess_64.h +++ b/arch/sh/include/asm/uaccess_64.h @@ -84,8 +84,4 @@ extern long __put_user_asm_l(void *, long); extern long __put_user_asm_q(void *, long); extern void __put_user_unknown(void); -extern long __strnlen_user(const char *__s, long __n); -extern int __strncpy_from_user(unsigned long __dest, - unsigned long __user __src, int __count); - #endif /* __ASM_SH_UACCESS_64_H */ diff --git a/arch/sh/include/asm/ucontext.h b/arch/sh/include/asm/ucontext.h deleted file mode 100644 index 9bc07b9f30fb..000000000000 --- a/arch/sh/include/asm/ucontext.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/asm/word-at-a-time.h b/arch/sh/include/asm/word-at-a-time.h new file mode 100644 index 000000000000..6e38953ff7fd --- /dev/null +++ b/arch/sh/include/asm/word-at-a-time.h @@ -0,0 +1,53 @@ +#ifndef __ASM_SH_WORD_AT_A_TIME_H +#define __ASM_SH_WORD_AT_A_TIME_H + +#ifdef CONFIG_CPU_BIG_ENDIAN +# include +#else +/* + * Little-endian version cribbed from x86. + */ +struct word_at_a_time { + const unsigned long one_bits, high_bits; +}; + +#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) } + +/* Carl Chatfield / Jan Achrenius G+ version for 32-bit */ +static inline long count_masked_bytes(long mask) +{ + /* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */ + long a = (0x0ff0001+mask) >> 23; + /* Fix the 1 for 00 case */ + return a & mask; +} + +/* Return nonzero if it has a zero */ +static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c) +{ + unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits; + *bits = mask; + return mask; +} + +static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c) +{ + return bits; +} + +static inline unsigned long create_zero_mask(unsigned long bits) +{ + bits = (bits - 1) & ~bits; + return bits >> 7; +} + +/* The mask we created is directly usable as a bytemask */ +#define zero_bytemask(mask) (mask) + +static inline unsigned long find_zero(unsigned long mask) +{ + return count_masked_bytes(mask); +} +#endif + +#endif diff --git a/arch/sh/include/asm/xor.h b/arch/sh/include/asm/xor.h deleted file mode 100644 index c82eb12a5b18..000000000000 --- a/arch/sh/include/asm/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h deleted file mode 100644 index 1192e1c761a7..000000000000 --- a/arch/sh/include/cpu-sh2a/cpu/ubc.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * SH-2A UBC definitions - * - * Copyright (C) 2008 Kieran Bingham - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef __ASM_CPU_SH2A_UBC_H -#define __ASM_CPU_SH2A_UBC_H - -#define UBC_BARA 0xfffc0400 -#define UBC_BAMRA 0xfffc0404 -#define UBC_BBRA 0xfffc04a0 /* 16 bit access */ -#define UBC_BDRA 0xfffc0408 -#define UBC_BDMRA 0xfffc040c - -#define UBC_BARB 0xfffc0410 -#define UBC_BAMRB 0xfffc0414 -#define UBC_BBRB 0xfffc04b0 /* 16 bit access */ -#define UBC_BDRB 0xfffc0418 -#define UBC_BDMRB 0xfffc041c - -#define UBC_BRCR 0xfffc04c0 - -#endif /* __ASM_CPU_SH2A_UBC_H */ diff --git a/arch/sh/kernel/cpu/sh3/serial-sh7720.c b/arch/sh/kernel/cpu/sh3/serial-sh7720.c index 8832c526cdf9..c4a0336660dd 100644 --- a/arch/sh/kernel/cpu/sh3/serial-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/serial-sh7720.c @@ -2,7 +2,7 @@ #include #include #include -#include +#include static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag) { diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c index ea01a72f1b94..53638e231cd0 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c @@ -283,7 +283,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c index 7ac07b4f75de..22e485d1990b 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c @@ -276,7 +276,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c index 8e1f97010c0d..c4cb740e4d10 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -261,7 +261,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR); + ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c index 35f75cf0c7e5..37c41c7747a3 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c @@ -311,7 +311,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR); + ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index 2a87901673fe..c87e78f73234 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -375,7 +375,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR); + ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c index 1697642c1f73..deb683abacf0 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c @@ -260,7 +260,7 @@ int __init arch_clk_init(void) &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c index 04ab5aeaf920..e84a43229b9c 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c @@ -148,7 +148,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c index ab1c58f2d101..1c83788db76a 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c @@ -175,7 +175,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c index 491709483e10..8bba6f159023 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c @@ -194,7 +194,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c index 0f11b392bf46..a9422dab0ce7 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c @@ -149,7 +149,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index ff1f0e6e9bec..b7cf6a547f11 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -1568,86 +1568,6 @@ ___clear_user_exit: #endif /* CONFIG_MMU */ -/* - * int __strncpy_from_user(unsigned long __dest, unsigned long __src, - * int __count) - * - * Inputs: - * (r2) target address - * (r3) source address - * (r4) maximum size in bytes - * - * Ouputs: - * (*r2) copied data - * (r2) -EFAULT (in case of faulting) - * copied data (otherwise) - */ - .global __strncpy_from_user -__strncpy_from_user: - pta ___strncpy_from_user1, tr0 - pta ___strncpy_from_user_done, tr1 - or r4, ZERO, r5 /* r5 = original count */ - beq/u r4, r63, tr1 /* early exit if r4==0 */ - movi -(EFAULT), r6 /* r6 = reply, no real fixup */ - or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */ - -___strncpy_from_user1: - ld.b r3, 0, r7 /* Fault address: only in reading */ - st.b r2, 0, r7 - addi r2, 1, r2 - addi r3, 1, r3 - beq/u ZERO, r7, tr1 - addi r4, -1, r4 /* return real number of copied bytes */ - bne/l ZERO, r4, tr0 - -___strncpy_from_user_done: - sub r5, r4, r6 /* If done, return copied */ - -___strncpy_from_user_exit: - or r6, ZERO, r2 - ptabs LINK, tr0 - blink tr0, ZERO - -/* - * extern long __strnlen_user(const char *__s, long __n) - * - * Inputs: - * (r2) source address - * (r3) source size in bytes - * - * Ouputs: - * (r2) -EFAULT (in case of faulting) - * string length (otherwise) - */ - .global __strnlen_user -__strnlen_user: - pta ___strnlen_user_set_reply, tr0 - pta ___strnlen_user1, tr1 - or ZERO, ZERO, r5 /* r5 = counter */ - movi -(EFAULT), r6 /* r6 = reply, no real fixup */ - or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */ - beq r3, ZERO, tr0 - -___strnlen_user1: - ldx.b r2, r5, r7 /* Fault address: only in reading */ - addi r3, -1, r3 /* No real fixup */ - addi r5, 1, r5 - beq r3, ZERO, tr0 - bne r7, ZERO, tr1 -! The line below used to be active. This meant led to a junk byte lying between each pair -! of entries in the argv & envp structures in memory. Whilst the program saw the right data -! via the argv and envp arguments to main, it meant the 'flat' representation visible through -! /proc/$pid/cmdline was corrupt, causing trouble with ps, for example. -! addi r5, 1, r5 /* Include '\0' */ - -___strnlen_user_set_reply: - or r5, ZERO, r6 /* If done, return counter */ - -___strnlen_user_exit: - or r6, ZERO, r2 - ptabs LINK, tr0 - blink tr0, ZERO - /* * extern long __get_user_asm_?(void *val, long addr) * @@ -1982,8 +1902,6 @@ asm_uaccess_start: .long ___copy_user2, ___copy_user_exit .long ___clear_user1, ___clear_user_exit #endif - .long ___strncpy_from_user1, ___strncpy_from_user_exit - .long ___strnlen_user1, ___strnlen_user_exit .long ___get_user_asm_b1, ___get_user_asm_b_exit .long ___get_user_asm_w1, ___get_user_asm_w_exit .long ___get_user_asm_l1, ___get_user_asm_l_exit diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 9b7a459a4613..055d91b70305 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -4,6 +4,7 @@ #include #include #include +#include struct kmem_cache *task_xstate_cachep = NULL; unsigned int xstate_size; diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 4264583eabac..602545b12a86 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -33,6 +33,7 @@ #include struct task_struct *last_task_used_math = NULL; +struct pt_regs fake_swapper_regs = { 0, }; void show_regs(struct pt_regs *regs) { diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c index 45afa5c51f67..26a0774f5272 100644 --- a/arch/sh/kernel/sh_ksyms_64.c +++ b/arch/sh/kernel/sh_ksyms_64.c @@ -32,8 +32,6 @@ EXPORT_SYMBOL(__get_user_asm_b); EXPORT_SYMBOL(__get_user_asm_w); EXPORT_SYMBOL(__get_user_asm_l); EXPORT_SYMBOL(__get_user_asm_q); -EXPORT_SYMBOL(__strnlen_user); -EXPORT_SYMBOL(__strncpy_from_user); EXPORT_SYMBOL(__clear_user); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(__copy_user); diff --git a/arch/sparc/include/asm/cmt.h b/arch/sparc/include/asm/cmt.h deleted file mode 100644 index 870db5928577..000000000000 --- a/arch/sparc/include/asm/cmt.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef _SPARC64_CMT_H -#define _SPARC64_CMT_H - -/* cmt.h: Chip Multi-Threading register definitions - * - * Copyright (C) 2004 David S. Miller (davem@redhat.com) - */ - -/* ASI_CORE_ID - private */ -#define LP_ID 0x0000000000000010UL -#define LP_ID_MAX 0x00000000003f0000UL -#define LP_ID_ID 0x000000000000003fUL - -/* ASI_INTR_ID - private */ -#define LP_INTR_ID 0x0000000000000000UL -#define LP_INTR_ID_ID 0x00000000000003ffUL - -/* ASI_CESR_ID - private */ -#define CESR_ID 0x0000000000000040UL -#define CESR_ID_ID 0x00000000000000ffUL - -/* ASI_CORE_AVAILABLE - shared */ -#define LP_AVAIL 0x0000000000000000UL -#define LP_AVAIL_1 0x0000000000000002UL -#define LP_AVAIL_0 0x0000000000000001UL - -/* ASI_CORE_ENABLE_STATUS - shared */ -#define LP_ENAB_STAT 0x0000000000000010UL -#define LP_ENAB_STAT_1 0x0000000000000002UL -#define LP_ENAB_STAT_0 0x0000000000000001UL - -/* ASI_CORE_ENABLE - shared */ -#define LP_ENAB 0x0000000000000020UL -#define LP_ENAB_1 0x0000000000000002UL -#define LP_ENAB_0 0x0000000000000001UL - -/* ASI_CORE_RUNNING - shared */ -#define LP_RUNNING_RW 0x0000000000000050UL -#define LP_RUNNING_W1S 0x0000000000000060UL -#define LP_RUNNING_W1C 0x0000000000000068UL -#define LP_RUNNING_1 0x0000000000000002UL -#define LP_RUNNING_0 0x0000000000000001UL - -/* ASI_CORE_RUNNING_STAT - shared */ -#define LP_RUN_STAT 0x0000000000000058UL -#define LP_RUN_STAT_1 0x0000000000000002UL -#define LP_RUN_STAT_0 0x0000000000000001UL - -/* ASI_XIR_STEERING - shared */ -#define LP_XIR_STEER 0x0000000000000030UL -#define LP_XIR_STEER_1 0x0000000000000002UL -#define LP_XIR_STEER_0 0x0000000000000001UL - -/* ASI_CMT_ERROR_STEERING - shared */ -#define CMT_ER_STEER 0x0000000000000040UL -#define CMT_ER_STEER_1 0x0000000000000002UL -#define CMT_ER_STEER_0 0x0000000000000001UL - -#endif /* _SPARC64_CMT_H */ diff --git a/arch/sparc/include/asm/mpmbox.h b/arch/sparc/include/asm/mpmbox.h deleted file mode 100644 index f8423039b242..000000000000 --- a/arch/sparc/include/asm/mpmbox.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * mpmbox.h: Interface and defines for the OpenProm mailbox - * facilities for MP machines under Linux. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_MPMBOX_H -#define _SPARC_MPMBOX_H - -/* The prom allocates, for each CPU on the machine an unsigned - * byte in physical ram. You probe the device tree prom nodes - * for these values. The purpose of this byte is to be able to - * pass messages from one cpu to another. - */ - -/* These are the main message types we have to look for in our - * Cpu mailboxes, based upon these values we decide what course - * of action to take. - */ - -/* The CPU is executing code in the kernel. */ -#define MAILBOX_ISRUNNING 0xf0 - -/* Another CPU called romvec->pv_exit(), you should call - * prom_stopcpu() when you see this in your mailbox. - */ -#define MAILBOX_EXIT 0xfb - -/* Another CPU called romvec->pv_enter(), you should call - * prom_cpuidle() when this is seen. - */ -#define MAILBOX_GOSPIN 0xfc - -/* Another CPU has hit a breakpoint either into kadb or the prom - * itself. Just like MAILBOX_GOSPIN, you should call prom_cpuidle() - * at this point. - */ -#define MAILBOX_BPT_SPIN 0xfd - -/* Oh geese, some other nitwit got a damn watchdog reset. The party's - * over so go call prom_stopcpu(). - */ -#define MAILBOX_WDOG_STOP 0xfe - -#ifndef __ASSEMBLY__ - -/* Handy macro's to determine a cpu's state. */ - -/* Is the cpu still in Power On Self Test? */ -#define MBOX_POST_P(letter) ((letter) >= 0x00 && (letter) <= 0x7f) - -/* Is the cpu at the 'ok' prompt of the PROM? */ -#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f) - -/* Is the cpu spinning in the PROM? */ -#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef) - -/* Sanity check... This is junk mail, throw it out. */ -#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa) - -/* Is the cpu actively running an application/kernel-code? */ -#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING) - -#endif /* !(__ASSEMBLY__) */ - -#endif /* !(_SPARC_MPMBOX_H) */ diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c index 5cffdc55f075..3e244f31e56b 100644 --- a/arch/sparc/kernel/vio.c +++ b/arch/sparc/kernel/vio.c @@ -443,7 +443,7 @@ static int __init vio_init(void) root_vdev = vio_create_one(hp, root, NULL); err = -ENODEV; if (!root_vdev) { - printk(KERN_ERR "VIO: Coult not create root device.\n"); + printk(KERN_ERR "VIO: Could not create root device.\n"); goto out_release; } diff --git a/arch/tile/include/asm/uaccess.h b/arch/tile/include/asm/uaccess.h index c3dd275f25e2..9ab078a4605d 100644 --- a/arch/tile/include/asm/uaccess.h +++ b/arch/tile/include/asm/uaccess.h @@ -146,7 +146,7 @@ extern int fixup_exception(struct pt_regs *regs); #ifdef __tilegx__ #define __get_user_1(x, ptr, ret) __get_user_asm(ld1u, x, ptr, ret) #define __get_user_2(x, ptr, ret) __get_user_asm(ld2u, x, ptr, ret) -#define __get_user_4(x, ptr, ret) __get_user_asm(ld4u, x, ptr, ret) +#define __get_user_4(x, ptr, ret) __get_user_asm(ld4s, x, ptr, ret) #define __get_user_8(x, ptr, ret) __get_user_asm(ld, x, ptr, ret) #else #define __get_user_1(x, ptr, ret) __get_user_asm(lb_u, x, ptr, ret) diff --git a/arch/tile/kernel/backtrace.c b/arch/tile/kernel/backtrace.c index 9092ce8aa6b4..f8b74ca83b92 100644 --- a/arch/tile/kernel/backtrace.c +++ b/arch/tile/kernel/backtrace.c @@ -14,6 +14,7 @@ #include #include +#include #include #include #include @@ -336,8 +337,12 @@ static void find_caller_pc_and_caller_sp(CallerLocation *location, bytes_to_prefetch / sizeof(tile_bundle_bits); } - /* Decode the next bundle. */ - bundle.bits = prefetched_bundles[next_bundle++]; + /* + * Decode the next bundle. + * TILE always stores instruction bundles in little-endian + * mode, even when the chip is running in big-endian mode. + */ + bundle.bits = le64_to_cpu(prefetched_bundles[next_bundle++]); bundle.num_insns = parse_insn_tile(bundle.bits, pc, bundle.insns); num_info_ops = bt_get_info_ops(&bundle, info_operands); diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index 88e466b159dc..43b39d61b538 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -705,7 +705,6 @@ static void stack_proc(void *arg) struct task_struct *from = current, *to = arg; to->thread.saved_task = from; - rcu_switch_from(from); switch_to(from, to, from); } diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S index be6d9e365a80..3470624d7835 100644 --- a/arch/x86/crypto/aesni-intel_asm.S +++ b/arch/x86/crypto/aesni-intel_asm.S @@ -2460,10 +2460,12 @@ ENTRY(aesni_cbc_dec) pxor IN3, STATE4 movaps IN4, IV #else - pxor (INP), STATE2 - pxor 0x10(INP), STATE3 pxor IN1, STATE4 movaps IN2, IV + movups (INP), IN1 + pxor IN1, STATE2 + movups 0x10(INP), IN2 + pxor IN2, STATE3 #endif movups STATE1, (OUTP) movups STATE2, 0x10(OUTP) diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c index daeca56211e3..673ac9b63d6b 100644 --- a/arch/x86/ia32/ia32_signal.c +++ b/arch/x86/ia32/ia32_signal.c @@ -38,7 +38,7 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) { int err = 0; - bool ia32 = is_ia32_task(); + bool ia32 = test_thread_flag(TIF_IA32); if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t))) return -EFAULT; diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 340ee49961a6..f91e80f4f180 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -176,7 +176,7 @@ #define X86_FEATURE_XSAVEOPT (7*32+ 4) /* Optimized Xsave */ #define X86_FEATURE_PLN (7*32+ 5) /* Intel Power Limit Notification */ #define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */ -#define X86_FEATURE_DTS (7*32+ 7) /* Digital Thermal Sensor */ +#define X86_FEATURE_DTHERM (7*32+ 7) /* Digital Thermal Sensor */ #define X86_FEATURE_HW_PSTATE (7*32+ 8) /* AMD HW-PState */ /* Virtualization flags: Linux defined, word 8 */ diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h index 43876f16caf1..cb00ccc7d571 100644 --- a/arch/x86/include/asm/pgtable-3level.h +++ b/arch/x86/include/asm/pgtable-3level.h @@ -47,16 +47,26 @@ static inline void native_set_pte(pte_t *ptep, pte_t pte) * they can run pmd_offset_map_lock or pmd_trans_huge or other pmd * operations. * - * Without THP if the mmap_sem is hold for reading, the - * pmd can only transition from null to not null while pmd_read_atomic runs. - * So there's no need of literally reading it atomically. + * Without THP if the mmap_sem is hold for reading, the pmd can only + * transition from null to not null while pmd_read_atomic runs. So + * we can always return atomic pmd values with this function. * * With THP if the mmap_sem is hold for reading, the pmd can become - * THP or null or point to a pte (and in turn become "stable") at any - * time under pmd_read_atomic, so it's mandatory to read it atomically - * with cmpxchg8b. + * trans_huge or none or point to a pte (and in turn become "stable") + * at any time under pmd_read_atomic. We could read it really + * atomically here with a atomic64_read for the THP enabled case (and + * it would be a whole lot simpler), but to avoid using cmpxchg8b we + * only return an atomic pmdval if the low part of the pmdval is later + * found stable (i.e. pointing to a pte). And we're returning a none + * pmdval if the low part of the pmd is none. In some cases the high + * and low part of the pmdval returned may not be consistent if THP is + * enabled (the low part may point to previously mapped hugepage, + * while the high part may point to a more recently mapped hugepage), + * but pmd_none_or_trans_huge_or_clear_bad() only needs the low part + * of the pmd to be read atomically to decide if the pmd is unstable + * or not, with the only exception of when the low part of the pmd is + * zero in which case we return a none pmd. */ -#ifndef CONFIG_TRANSPARENT_HUGEPAGE static inline pmd_t pmd_read_atomic(pmd_t *pmdp) { pmdval_t ret; @@ -74,12 +84,6 @@ static inline pmd_t pmd_read_atomic(pmd_t *pmdp) return (pmd_t) { ret }; } -#else /* CONFIG_TRANSPARENT_HUGEPAGE */ -static inline pmd_t pmd_read_atomic(pmd_t *pmdp) -{ - return (pmd_t) { atomic64_read((atomic64_t *)pmdp) }; -} -#endif /* CONFIG_TRANSPARENT_HUGEPAGE */ static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte) { diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 8afb69319815..b2297e58c6ed 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -422,12 +422,14 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header, return 0; } - if (intsrc->source_irq == 0 && intsrc->global_irq == 2) { + if (intsrc->source_irq == 0) { if (acpi_skip_timer_override) { - printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); + printk(PREFIX "BIOS IRQ0 override ignored.\n"); return 0; } - if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) { + + if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity + && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) { intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK; printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n"); } @@ -1334,17 +1336,12 @@ static int __init dmi_disable_acpi(const struct dmi_system_id *d) } /* - * Force ignoring BIOS IRQ0 pin2 override + * Force ignoring BIOS IRQ0 override */ static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d) { - /* - * The ati_ixp4x0_rev() early PCI quirk should have set - * the acpi_skip_timer_override flag already: - */ if (!acpi_skip_timer_override) { - WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n"); - pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n", + pr_notice("%s detected: Ignoring BIOS IRQ0 override\n", d->ident); acpi_skip_timer_override = 1; } @@ -1438,7 +1435,7 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = { * is enabled. This input is incorrectly designated the * ISA IRQ 0 via an interrupt source override even though * it is wired to the output of the master 8259A and INTIN0 - * is not connected at all. Force ignoring BIOS IRQ0 pin2 + * is not connected at all. Force ignoring BIOS IRQ0 * override in that cases. */ { @@ -1473,6 +1470,14 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"), }, }, + { + .callback = dmi_ignore_irq0_timer_override, + .ident = "FUJITSU SIEMENS", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"), + }, + }, {} }; diff --git a/arch/x86/kernel/cpu/mkcapflags.pl b/arch/x86/kernel/cpu/mkcapflags.pl index dfea390e1608..c7b3fe2d72e0 100644 --- a/arch/x86/kernel/cpu/mkcapflags.pl +++ b/arch/x86/kernel/cpu/mkcapflags.pl @@ -1,4 +1,4 @@ -#!/usr/bin/perl +#!/usr/bin/perl -w # # Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h # @@ -11,22 +11,35 @@ open(OUT, "> $out\0") or die "$0: cannot create: $out: $!\n"; print OUT "#include \n\n"; print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n"; +%features = (); +$err = 0; + while (defined($line = )) { if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) { $macro = $1; - $feature = $2; + $feature = "\L$2"; $tail = $3; if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) { - $feature = $1; + $feature = "\L$1"; } - if ($feature ne '') { - printf OUT "\t%-32s = \"%s\",\n", - "[$macro]", "\L$feature"; + next if ($feature eq ''); + + if ($features{$feature}++) { + print STDERR "$in: duplicate feature name: $feature\n"; + $err++; } + printf OUT "\t%-32s = \"%s\",\n", "[$macro]", $feature; } } print OUT "};\n"; close(IN); close(OUT); + +if ($err) { + unlink($out); + exit(1); +} + +exit(0); diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c index addf9e82a7f2..ee8e9abc859f 100644 --- a/arch/x86/kernel/cpu/scattered.c +++ b/arch/x86/kernel/cpu/scattered.c @@ -31,7 +31,7 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) const struct cpuid_bit *cb; static const struct cpuid_bit __cpuinitconst cpuid_bits[] = { - { X86_FEATURE_DTS, CR_EAX, 0, 0x00000006, 0 }, + { X86_FEATURE_DTHERM, CR_EAX, 0, 0x00000006, 0 }, { X86_FEATURE_IDA, CR_EAX, 1, 0x00000006, 0 }, { X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006, 0 }, { X86_FEATURE_PLN, CR_EAX, 4, 0x00000006, 0 }, diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index 8bfb6146f753..3f61904365cf 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -444,12 +444,12 @@ void kgdb_roundup_cpus(unsigned long flags) /** * kgdb_arch_handle_exception - Handle architecture specific GDB packets. - * @vector: The error vector of the exception that happened. + * @e_vector: The error vector of the exception that happened. * @signo: The signal number of the exception that happened. * @err_code: The error code of the exception that happened. - * @remcom_in_buffer: The buffer of the packet we have read. - * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into. - * @regs: The &struct pt_regs of the current process. + * @remcomInBuffer: The buffer of the packet we have read. + * @remcomOutBuffer: The buffer of %BUFMAX bytes to write a packet into. + * @linux_regs: The &struct pt_regs of the current process. * * This function MUST handle the 'c' and 's' command packets, * as well packets to set / remove a hardware breakpoint, if used. diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 086eb58c6e80..f1b42b3a186c 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -120,11 +120,6 @@ bool kvm_check_and_clear_guest_paused(void) bool ret = false; struct pvclock_vcpu_time_info *src; - /* - * per_cpu() is safe here because this function is only called from - * timer functions where preemption is already disabled. - */ - WARN_ON(!in_atomic()); src = &__get_cpu_var(hv_clock); if ((src->flags & PVCLOCK_GUEST_STOPPED) != 0) { __this_cpu_and(hv_clock.flags, ~PVCLOCK_GUEST_STOPPED); diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 62c9457ccd2f..c0f420f76cd3 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -100,7 +100,7 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size, struct dma_attrs *attrs) { unsigned long dma_mask; - struct page *page = NULL; + struct page *page; unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT; dma_addr_t addr; @@ -108,6 +108,7 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size, flag |= __GFP_ZERO; again: + page = NULL; if (!(flag & GFP_ATOMIC)) page = dma_alloc_from_contiguous(dev, count, get_order(size)); if (!page) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 25b48edb847c..5de92f1abd76 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -451,6 +451,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"), }, }, + { /* Handle problems with rebooting on the Precision M6600. */ + .callback = set_pci_reboot, + .ident = "Dell OptiPlex 990", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"), + }, + }, { } }; diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 3fab55bea29b..7bd8a0823654 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -349,9 +349,12 @@ static bool __cpuinit match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o) static bool __cpuinit match_mc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o) { - if (c->phys_proc_id == o->phys_proc_id) - return topology_sane(c, o, "mc"); + if (c->phys_proc_id == o->phys_proc_id) { + if (cpu_has(c, X86_FEATURE_AMD_DCM)) + return true; + return topology_sane(c, o, "mc"); + } return false; } diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index 7515cf0e1805..5db36caf4289 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -139,6 +139,19 @@ static int addr_to_vsyscall_nr(unsigned long addr) return nr; } +#ifdef CONFIG_SECCOMP +static int vsyscall_seccomp(struct task_struct *tsk, int syscall_nr) +{ + if (!seccomp_mode(&tsk->seccomp)) + return 0; + task_pt_regs(tsk)->orig_ax = syscall_nr; + task_pt_regs(tsk)->ax = syscall_nr; + return __secure_computing(syscall_nr); +} +#else +#define vsyscall_seccomp(_tsk, _nr) 0 +#endif + static bool write_ok_or_segv(unsigned long ptr, size_t size) { /* @@ -174,6 +187,7 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) int vsyscall_nr; int prev_sig_on_uaccess_error; long ret; + int skip; /* * No point in checking CS -- the only way to get here is a user mode @@ -205,9 +219,6 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) } tsk = current; - if (seccomp_mode(&tsk->seccomp)) - do_exit(SIGKILL); - /* * With a real vsyscall, page faults cause SIGSEGV. We want to * preserve that behavior to make writing exploits harder. @@ -222,8 +233,13 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) * address 0". */ ret = -EFAULT; + skip = 0; switch (vsyscall_nr) { case 0: + skip = vsyscall_seccomp(tsk, __NR_gettimeofday); + if (skip) + break; + if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) || !write_ok_or_segv(regs->si, sizeof(struct timezone))) break; @@ -234,6 +250,10 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) break; case 1: + skip = vsyscall_seccomp(tsk, __NR_time); + if (skip) + break; + if (!write_ok_or_segv(regs->di, sizeof(time_t))) break; @@ -241,6 +261,10 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) break; case 2: + skip = vsyscall_seccomp(tsk, __NR_getcpu); + if (skip) + break; + if (!write_ok_or_segv(regs->di, sizeof(unsigned)) || !write_ok_or_segv(regs->si, sizeof(unsigned))) break; @@ -253,6 +277,12 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error; + if (skip) { + if ((long)regs->ax <= 0L) /* seccomp errno emulation */ + goto do_ret; + goto done; /* seccomp trace/trap */ + } + if (ret == -EFAULT) { /* Bad news -- userspace fed a bad pointer to a vsyscall. */ warn_bad_vsyscall(KERN_INFO, regs, @@ -271,10 +301,11 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) regs->ax = ret; +do_ret: /* Emulate a ret instruction. */ regs->ip = caller; regs->sp += 8; - +done: return true; sigsegv: diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index be3cea4407ff..57e168e27b5b 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -3934,6 +3934,9 @@ static void kvm_mmu_remove_some_alloc_mmu_pages(struct kvm *kvm, { struct kvm_mmu_page *page; + if (list_empty(&kvm->arch.active_mmu_pages)) + return; + page = container_of(kvm->arch.active_mmu_pages.prev, struct kvm_mmu_page, link); kvm_mmu_prepare_zap_page(kvm, page, invalid_list); diff --git a/arch/x86/lib/csum-wrappers_64.c b/arch/x86/lib/csum-wrappers_64.c index 459b58a8a15c..25b7ae8d058a 100644 --- a/arch/x86/lib/csum-wrappers_64.c +++ b/arch/x86/lib/csum-wrappers_64.c @@ -115,7 +115,7 @@ EXPORT_SYMBOL(csum_partial_copy_to_user); * @src: source address * @dst: destination address * @len: number of bytes to be copied. - * @isum: initial sum that is added into the result (32bit unfolded) + * @sum: initial sum that is added into the result (32bit unfolded) * * Returns an 32bit unfolded checksum of the buffer. */ diff --git a/arch/x86/lib/usercopy.c b/arch/x86/lib/usercopy.c index 677b1ed184c9..4f74d94c8d97 100644 --- a/arch/x86/lib/usercopy.c +++ b/arch/x86/lib/usercopy.c @@ -22,7 +22,7 @@ copy_from_user_nmi(void *to, const void __user *from, unsigned long n) void *map; int ret; - if (__range_not_ok(from, n, TASK_SIZE) == 0) + if (__range_not_ok(from, n, TASK_SIZE)) return len; do { diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index be1ef574ce9a..78fe3f1ac49f 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -180,7 +180,7 @@ err_free_memtype: /** * ioremap_nocache - map bus memory into CPU space - * @offset: bus address of the memory + * @phys_addr: bus address of the memory * @size: size of the resource to map * * ioremap_nocache performs a platform specific sequence of operations to @@ -217,7 +217,7 @@ EXPORT_SYMBOL(ioremap_nocache); /** * ioremap_wc - map memory into CPU space write combined - * @offset: bus address of the memory + * @phys_addr: bus address of the memory * @size: size of the resource to map * * This version of ioremap ensures that the memory is marked write combining. diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index e1ebde315210..a718e0d23503 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -122,7 +122,7 @@ within(unsigned long addr, unsigned long start, unsigned long end) /** * clflush_cache_range - flush a cache range with clflush - * @addr: virtual start address + * @vaddr: virtual start address * @size: number of bytes to flush * * clflush is an unordered instruction which needs fencing with mfence diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c index 3c6e328483c7..028454f0c3a5 100644 --- a/arch/x86/platform/mrst/early_printk_mrst.c +++ b/arch/x86/platform/mrst/early_printk_mrst.c @@ -110,19 +110,16 @@ static struct kmsg_dumper dw_dumper; static int dumper_registered; static void dw_kmsg_dump(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *s1, unsigned long l1, - const char *s2, unsigned long l2) + enum kmsg_dump_reason reason) { - int i; + static char line[1024]; + size_t len; /* When run to this, we'd better re-init the HW */ mrst_early_console_init(); - for (i = 0; i < l1; i++) - early_mrst_console.write(&early_mrst_console, s1 + i, 1); - for (i = 0; i < l2; i++) - early_mrst_console.write(&early_mrst_console, s2 + i, 1); + while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len)) + early_mrst_console.write(&early_mrst_console, line, len); } /* Set the ratio rate to 115200, 8n1, IRQ disabled */ diff --git a/arch/x86/um/sys_call_table_32.c b/arch/x86/um/sys_call_table_32.c index 416bd40c0eba..68d1dc91b37b 100644 --- a/arch/x86/um/sys_call_table_32.c +++ b/arch/x86/um/sys_call_table_32.c @@ -39,9 +39,9 @@ #undef __SYSCALL_I386 #define __SYSCALL_I386(nr, sym, compat) [ nr ] = sym, -typedef void (*sys_call_ptr_t)(void); +typedef asmlinkage void (*sys_call_ptr_t)(void); -extern void sys_ni_syscall(void); +extern asmlinkage void sys_ni_syscall(void); const sys_call_ptr_t sys_call_table[] __cacheline_aligned = { /* diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index e74df9548a02..ff962d4b821e 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -209,6 +209,9 @@ static void __init xen_banner(void) xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : ""); } +#define CPUID_THERM_POWER_LEAF 6 +#define APERFMPERF_PRESENT 0 + static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0; static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0; @@ -242,6 +245,11 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, *dx = cpuid_leaf5_edx_val; return; + case CPUID_THERM_POWER_LEAF: + /* Disabling APERFMPERF for kernel usage */ + maskecx = ~(1 << APERFMPERF_PRESENT); + break; + case 0xb: /* Suppress extended topology stuff */ maskebx = 0; diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index ffd08c414e91..64effdc6da94 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -706,6 +706,7 @@ int m2p_add_override(unsigned long mfn, struct page *page, unsigned long uninitialized_var(address); unsigned level; pte_t *ptep = NULL; + int ret = 0; pfn = page_to_pfn(page); if (!PageHighMem(page)) { @@ -741,6 +742,24 @@ int m2p_add_override(unsigned long mfn, struct page *page, list_add(&page->lru, &m2p_overrides[mfn_hash(mfn)]); spin_unlock_irqrestore(&m2p_override_lock, flags); + /* p2m(m2p(mfn)) == mfn: the mfn is already present somewhere in + * this domain. Set the FOREIGN_FRAME_BIT in the p2m for the other + * pfn so that the following mfn_to_pfn(mfn) calls will return the + * pfn from the m2p_override (the backend pfn) instead. + * We need to do this because the pages shared by the frontend + * (xen-blkfront) can be already locked (lock_page, called by + * do_read_cache_page); when the userspace backend tries to use them + * with direct_IO, mfn_to_pfn returns the pfn of the frontend, so + * do_blockdev_direct_IO is going to try to lock the same pages + * again resulting in a deadlock. + * As a side effect get_user_pages_fast might not be safe on the + * frontend pages while they are being shared with the backend, + * because mfn_to_pfn (that ends up being called by GUPF) will + * return the backend pfn rather than the frontend pfn. */ + ret = __get_user(pfn, &machine_to_phys_mapping[mfn]); + if (ret == 0 && get_phys_to_machine(pfn) == mfn) + set_phys_to_machine(pfn, FOREIGN_FRAME(mfn)); + return 0; } EXPORT_SYMBOL_GPL(m2p_add_override); @@ -752,6 +771,7 @@ int m2p_remove_override(struct page *page, bool clear_pte) unsigned long uninitialized_var(address); unsigned level; pte_t *ptep = NULL; + int ret = 0; pfn = page_to_pfn(page); mfn = get_phys_to_machine(pfn); @@ -821,6 +841,22 @@ int m2p_remove_override(struct page *page, bool clear_pte) } else set_phys_to_machine(pfn, page->index); + /* p2m(m2p(mfn)) == FOREIGN_FRAME(mfn): the mfn is already present + * somewhere in this domain, even before being added to the + * m2p_override (see comment above in m2p_add_override). + * If there are no other entries in the m2p_override corresponding + * to this mfn, then remove the FOREIGN_FRAME_BIT from the p2m for + * the original pfn (the one shared by the frontend): the backend + * cannot do any IO on this page anymore because it has been + * unshared. Removing the FOREIGN_FRAME_BIT from the p2m entry of + * the original pfn causes mfn_to_pfn(mfn) to return the frontend + * pfn again. */ + mfn &= ~FOREIGN_FRAME_BIT; + ret = __get_user(pfn, &machine_to_phys_mapping[mfn]); + if (ret == 0 && get_phys_to_machine(pfn) == FOREIGN_FRAME(mfn) && + m2p_find_override(mfn) == NULL) + set_phys_to_machine(pfn, mfn); + return 0; } EXPORT_SYMBOL_GPL(m2p_remove_override); diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 3ebba0753d38..a4790bf22c59 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -371,7 +371,8 @@ char * __init xen_memory_setup(void) populated = xen_populate_chunk(map, memmap.nr_entries, max_pfn, &last_pfn, xen_released_pages); - extra_pages += (xen_released_pages - populated); + xen_released_pages -= populated; + extra_pages += xen_released_pages; if (last_pfn > max_pfn) { max_pfn = min(MAX_DOMAIN_PAGES, last_pfn); diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile index 7608559de93a..f973754ddf90 100644 --- a/arch/xtensa/Makefile +++ b/arch/xtensa/Makefile @@ -68,8 +68,8 @@ endif # Only build variant and/or platform if it includes a Makefile -buildvar := $(shell test -a $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/) -buildplf := $(shell test -a $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/) +buildvar := $(shell test -e $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/) +buildplf := $(shell test -e $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/) # Find libgcc.a diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index 9b306e550e3f..2c8d6a3d250a 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -277,7 +277,7 @@ void xtensa_elf_core_copy_regs (xtensa_gregset_t *elfregs, struct pt_regs *regs) /* Don't leak any random bits. */ - memset(elfregs, 0, sizeof (elfregs)); + memset(elfregs, 0, sizeof(*elfregs)); /* Note: PS.EXCM is not set while user task is running; its * being set in regs->ps is for exception handling convenience. diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index 88ecea3facb4..ee2e2089483d 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -83,7 +83,6 @@ SECTIONS _text = .; _stext = .; - _ftext = .; .text : { @@ -112,7 +111,7 @@ SECTIONS EXCEPTION_TABLE(16) /* Data section */ - _fdata = .; + _sdata = .; RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE) _edata = .; diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c index ba150e5de2eb..db955179da2d 100644 --- a/arch/xtensa/mm/init.c +++ b/arch/xtensa/mm/init.c @@ -26,11 +26,7 @@ #include #include - -/* References to section boundaries */ - -extern char _ftext, _etext, _fdata, _edata, _rodata_end; -extern char __init_begin, __init_end; +#include /* * mem_reserve(start, end, must_exist) @@ -197,9 +193,9 @@ void __init mem_init(void) reservedpages++; } - codesize = (unsigned long) &_etext - (unsigned long) &_ftext; - datasize = (unsigned long) &_edata - (unsigned long) &_fdata; - initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; + codesize = (unsigned long) _etext - (unsigned long) _stext; + datasize = (unsigned long) _edata - (unsigned long) _sdata; + initsize = (unsigned long) __init_end - (unsigned long) __init_begin; printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, " "%ldk data, %ldk init %ldk highmem)\n", @@ -237,7 +233,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) void free_initmem(void) { - free_reserved_mem(&__init_begin, &__init_end); - printk("Freeing unused kernel memory: %dk freed\n", - (&__init_end - &__init_begin) >> 10); + free_reserved_mem(__init_begin, __init_end); + printk("Freeing unused kernel memory: %zuk freed\n", + (__init_end - __init_begin) >> 10); } diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index 02cf6335e9bd..e7dee617358e 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -125,12 +125,8 @@ static struct blkcg_gq *blkg_alloc(struct blkcg *blkcg, struct request_queue *q) blkg->pd[i] = pd; pd->blkg = blkg; - } - - /* invoke per-policy init */ - for (i = 0; i < BLKCG_MAX_POLS; i++) { - struct blkcg_policy *pol = blkcg_policy[i]; + /* invoke per-policy init */ if (blkcg_policy_enabled(blkg->q, pol)) pol->pd_init_fn(blkg); } @@ -245,10 +241,9 @@ EXPORT_SYMBOL_GPL(blkg_lookup_create); static void blkg_destroy(struct blkcg_gq *blkg) { - struct request_queue *q = blkg->q; struct blkcg *blkcg = blkg->blkcg; - lockdep_assert_held(q->queue_lock); + lockdep_assert_held(blkg->q->queue_lock); lockdep_assert_held(&blkcg->lock); /* Something wrong if we are trying to remove same group twice */ diff --git a/block/blk-core.c b/block/blk-core.c index 3c923a7aeb56..93eb3e4f88ce 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -361,9 +361,10 @@ EXPORT_SYMBOL(blk_put_queue); */ void blk_drain_queue(struct request_queue *q, bool drain_all) { + int i; + while (true) { bool drain = false; - int i; spin_lock_irq(q->queue_lock); @@ -408,6 +409,18 @@ void blk_drain_queue(struct request_queue *q, bool drain_all) break; msleep(10); } + + /* + * With queue marked dead, any woken up waiter will fail the + * allocation path, so the wakeup chaining is lost and we're + * left with hung waiters. We need to wake up those waiters. + */ + if (q->request_fn) { + spin_lock_irq(q->queue_lock); + for (i = 0; i < ARRAY_SIZE(q->rq.wait); i++) + wake_up_all(&q->rq.wait[i]); + spin_unlock_irq(q->queue_lock); + } } /** @@ -467,7 +480,6 @@ void blk_cleanup_queue(struct request_queue *q) /* mark @q DEAD, no new request or merges will be allowed afterwards */ mutex_lock(&q->sysfs_lock); queue_flag_set_unlocked(QUEUE_FLAG_DEAD, q); - spin_lock_irq(lock); /* @@ -485,10 +497,6 @@ void blk_cleanup_queue(struct request_queue *q) queue_flag_set(QUEUE_FLAG_NOMERGES, q); queue_flag_set(QUEUE_FLAG_NOXMERGES, q); queue_flag_set(QUEUE_FLAG_DEAD, q); - - if (q->queue_lock != &q->__queue_lock) - q->queue_lock = &q->__queue_lock; - spin_unlock_irq(lock); mutex_unlock(&q->sysfs_lock); @@ -499,6 +507,11 @@ void blk_cleanup_queue(struct request_queue *q) del_timer_sync(&q->backing_dev_info.laptop_mode_wb_timer); blk_sync_queue(q); + spin_lock_irq(lock); + if (q->queue_lock != &q->__queue_lock) + q->queue_lock = &q->__queue_lock; + spin_unlock_irq(lock); + /* @q is and will stay empty, shutdown and put */ blk_put_queue(q); } diff --git a/block/blk-timeout.c b/block/blk-timeout.c index 780354888958..6e4744cbfb56 100644 --- a/block/blk-timeout.c +++ b/block/blk-timeout.c @@ -197,44 +197,3 @@ void blk_add_timer(struct request *req) mod_timer(&q->timeout, expiry); } -/** - * blk_abort_queue -- Abort all request on given queue - * @queue: pointer to queue - * - */ -void blk_abort_queue(struct request_queue *q) -{ - unsigned long flags; - struct request *rq, *tmp; - LIST_HEAD(list); - - /* - * Not a request based block device, nothing to abort - */ - if (!q->request_fn) - return; - - spin_lock_irqsave(q->queue_lock, flags); - - elv_abort_queue(q); - - /* - * Splice entries to local list, to avoid deadlocking if entries - * get readded to the timeout list by error handling - */ - list_splice_init(&q->timeout_list, &list); - - list_for_each_entry_safe(rq, tmp, &list, timeout_list) - blk_abort_request(rq); - - /* - * Occasionally, blk_abort_request() will return without - * deleting the element from the list. Make sure we add those back - * instead of leaving them on the local stack list. - */ - list_splice(&list, &q->timeout_list); - - spin_unlock_irqrestore(q->queue_lock, flags); - -} -EXPORT_SYMBOL_GPL(blk_abort_queue); diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 673c977cc2bf..fb52df9744f5 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -17,8 +17,6 @@ #include "blk.h" #include "blk-cgroup.h" -static struct blkcg_policy blkcg_policy_cfq __maybe_unused; - /* * tunables */ @@ -418,11 +416,6 @@ static inline struct cfq_group *pd_to_cfqg(struct blkg_policy_data *pd) return pd ? container_of(pd, struct cfq_group, pd) : NULL; } -static inline struct cfq_group *blkg_to_cfqg(struct blkcg_gq *blkg) -{ - return pd_to_cfqg(blkg_to_pd(blkg, &blkcg_policy_cfq)); -} - static inline struct blkcg_gq *cfqg_to_blkg(struct cfq_group *cfqg) { return pd_to_blkg(&cfqg->pd); @@ -572,6 +565,13 @@ static inline void cfqg_stats_update_avg_queue_size(struct cfq_group *cfqg) { } #ifdef CONFIG_CFQ_GROUP_IOSCHED +static struct blkcg_policy blkcg_policy_cfq; + +static inline struct cfq_group *blkg_to_cfqg(struct blkcg_gq *blkg) +{ + return pd_to_cfqg(blkg_to_pd(blkg, &blkcg_policy_cfq)); +} + static inline void cfqg_get(struct cfq_group *cfqg) { return blkg_get(cfqg_to_blkg(cfqg)); @@ -3951,10 +3951,11 @@ static void cfq_exit_queue(struct elevator_queue *e) cfq_shutdown_timer_wq(cfqd); -#ifndef CONFIG_CFQ_GROUP_IOSCHED +#ifdef CONFIG_CFQ_GROUP_IOSCHED + blkcg_deactivate_policy(q, &blkcg_policy_cfq); +#else kfree(cfqd->root_group); #endif - blkcg_deactivate_policy(q, &blkcg_policy_cfq); kfree(cfqd); } @@ -4194,14 +4195,15 @@ static int __init cfq_init(void) #ifdef CONFIG_CFQ_GROUP_IOSCHED if (!cfq_group_idle) cfq_group_idle = 1; -#else - cfq_group_idle = 0; -#endif ret = blkcg_policy_register(&blkcg_policy_cfq); if (ret) return ret; +#else + cfq_group_idle = 0; +#endif + ret = -ENOMEM; cfq_pool = KMEM_CACHE(cfq_queue, 0); if (!cfq_pool) goto err_pol_unreg; @@ -4215,13 +4217,17 @@ static int __init cfq_init(void) err_free_pool: kmem_cache_destroy(cfq_pool); err_pol_unreg: +#ifdef CONFIG_CFQ_GROUP_IOSCHED blkcg_policy_unregister(&blkcg_policy_cfq); +#endif return ret; } static void __exit cfq_exit(void) { +#ifdef CONFIG_CFQ_GROUP_IOSCHED blkcg_policy_unregister(&blkcg_policy_cfq); +#endif elv_unregister(&iosched_cfq); kmem_cache_destroy(cfq_pool); } diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c index 260fa80ef575..9a87daa6f4fb 100644 --- a/block/scsi_ioctl.c +++ b/block/scsi_ioctl.c @@ -721,11 +721,14 @@ int scsi_verify_blk_ioctl(struct block_device *bd, unsigned int cmd) break; } + if (capable(CAP_SYS_RAWIO)) + return 0; + /* In particular, rule out all resets and host-specific ioctls. */ printk_ratelimited(KERN_WARNING "%s: sending ioctl %x to a partition!\n", current->comm, cmd); - return capable(CAP_SYS_RAWIO) ? 0 : -ENOIOCTLCMD; + return -ENOIOCTLCMD; } EXPORT_SYMBOL(scsi_verify_blk_ioctl); diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index 6512b20aeccd..d1fcbc0f6cbc 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -292,7 +292,9 @@ static int acpi_ac_add(struct acpi_device *device) ac->charger.properties = ac_props; ac->charger.num_properties = ARRAY_SIZE(ac_props); ac->charger.get_property = get_ac_property; - power_supply_register(&ac->device->dev, &ac->charger); + result = power_supply_register(&ac->device->dev, &ac->charger); + if (result) + goto end; printk(KERN_INFO PREFIX "%s [%s] (%s)\n", acpi_device_name(device), acpi_device_bid(device), diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c index d98571385656..24c807f96636 100644 --- a/drivers/acpi/acpi_memhotplug.c +++ b/drivers/acpi/acpi_memhotplug.c @@ -341,7 +341,7 @@ static void acpi_memory_device_notify(acpi_handle handle, u32 event, void *data) { struct acpi_memory_device *mem_device; struct acpi_device *device; - + u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */ switch (event) { case ACPI_NOTIFY_BUS_CHECK: @@ -354,15 +354,20 @@ static void acpi_memory_device_notify(acpi_handle handle, u32 event, void *data) "\nReceived DEVICE CHECK notification for device\n")); if (acpi_memory_get_device(handle, &mem_device)) { printk(KERN_ERR PREFIX "Cannot find driver data\n"); - return; + break; } - if (!acpi_memory_check_device(mem_device)) { - if (acpi_memory_enable_device(mem_device)) - printk(KERN_ERR PREFIX - "Cannot enable memory device\n"); + if (acpi_memory_check_device(mem_device)) + break; + + if (acpi_memory_enable_device(mem_device)) { + printk(KERN_ERR PREFIX "Cannot enable memory device\n"); + break; } + + ost_code = ACPI_OST_SC_SUCCESS; break; + case ACPI_NOTIFY_EJECT_REQUEST: ACPI_DEBUG_PRINT((ACPI_DB_INFO, "\nReceived EJECT REQUEST notification for device\n")); @@ -383,19 +388,35 @@ static void acpi_memory_device_notify(acpi_handle handle, u32 event, void *data) * TBD: Can also be disabled by Callback registration * with generic sysfs driver */ - if (acpi_memory_disable_device(mem_device)) - printk(KERN_ERR PREFIX - "Disable memory device\n"); + if (acpi_memory_disable_device(mem_device)) { + printk(KERN_ERR PREFIX "Disable memory device\n"); + /* + * If _EJ0 was called but failed, _OST is not + * necessary. + */ + if (mem_device->state == MEMORY_INVALID_STATE) + return; + + break; + } + /* * TBD: Invoke acpi_bus_remove to cleanup data structures */ - break; + + /* _EJ0 succeeded; _OST is not necessary */ + return; + default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported event [0x%x]\n", event)); - break; + + /* non-hotplug event; possibly handled by other handler */ + return; } + /* Inform firmware that the hotplug operation has completed */ + (void) acpi_evaluate_hotplug_ost(handle, event, ost_code, NULL); return; } diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c index f3e959f5e7a0..af4aad6ee2eb 100644 --- a/drivers/acpi/acpi_pad.c +++ b/drivers/acpi/acpi_pad.c @@ -36,6 +36,7 @@ #define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator" #define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80 static DEFINE_MUTEX(isolated_cpus_lock); +static DEFINE_MUTEX(round_robin_lock); static unsigned long power_saving_mwait_eax; @@ -107,7 +108,7 @@ static void round_robin_cpu(unsigned int tsk_index) if (!alloc_cpumask_var(&tmp, GFP_KERNEL)) return; - mutex_lock(&isolated_cpus_lock); + mutex_lock(&round_robin_lock); cpumask_clear(tmp); for_each_cpu(cpu, pad_busy_cpus) cpumask_or(tmp, tmp, topology_thread_cpumask(cpu)); @@ -116,7 +117,7 @@ static void round_robin_cpu(unsigned int tsk_index) if (cpumask_empty(tmp)) cpumask_andnot(tmp, cpu_online_mask, pad_busy_cpus); if (cpumask_empty(tmp)) { - mutex_unlock(&isolated_cpus_lock); + mutex_unlock(&round_robin_lock); return; } for_each_cpu(cpu, tmp) { @@ -131,7 +132,7 @@ static void round_robin_cpu(unsigned int tsk_index) tsk_in_cpu[tsk_index] = preferred_cpu; cpumask_set_cpu(preferred_cpu, pad_busy_cpus); cpu_weight[preferred_cpu]++; - mutex_unlock(&isolated_cpus_lock); + mutex_unlock(&round_robin_lock); set_cpus_allowed_ptr(current, cpumask_of(preferred_cpu)); } diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 793b8cc8e256..0a1b3435f920 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -134,12 +134,14 @@ acpi-y += \ tbinstal.o \ tbutils.o \ tbxface.o \ + tbxfload.o \ tbxfroot.o acpi-y += \ utaddress.o \ utalloc.o \ utcopy.o \ + utexcep.o \ utdebug.o \ utdecode.o \ utdelete.o \ diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index d700f63e4701..c0a43b38c6a3 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -237,7 +237,7 @@ u32 acpi_ev_install_sci_handler(void); acpi_status acpi_ev_remove_sci_handler(void); -u32 acpi_ev_initialize_sCI(u32 program_sCI); +u32 acpi_ev_initialize_SCI(u32 program_SCI); ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_ev_terminate(void)) #endif /* __ACEVENTS_H__ */ diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 4f7d3f57d05c..ce79100fb5eb 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -278,8 +278,7 @@ ACPI_EXTERN acpi_cache_t *acpi_gbl_operand_cache; /* Global handlers */ -ACPI_EXTERN struct acpi_object_notify_handler acpi_gbl_device_notify; -ACPI_EXTERN struct acpi_object_notify_handler acpi_gbl_system_notify; +ACPI_EXTERN struct acpi_global_notify_handler acpi_gbl_global_notify[2]; ACPI_EXTERN acpi_exception_handler acpi_gbl_exception_handler; ACPI_EXTERN acpi_init_handler acpi_gbl_init_handler; ACPI_EXTERN acpi_tbl_handler acpi_gbl_table_handler; @@ -327,14 +326,6 @@ extern const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS]; #endif -/* Exception codes */ - -extern char const *acpi_gbl_exception_names_env[]; -extern char const *acpi_gbl_exception_names_pgm[]; -extern char const *acpi_gbl_exception_names_tbl[]; -extern char const *acpi_gbl_exception_names_aml[]; -extern char const *acpi_gbl_exception_names_ctrl[]; - /***************************************************************************** * * Namespace globals @@ -463,4 +454,12 @@ ACPI_EXTERN u32 acpi_gbl_size_of_acpi_objects; #endif /* ACPI_DEBUGGER */ +/***************************************************************************** + * + * Info/help support + * + ****************************************************************************/ + +extern const struct ah_predefined_name asl_predefined_info[]; + #endif /* __ACGLOBAL_H__ */ diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index e3922ca20e7f..cc80fe10e8ea 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -299,7 +299,7 @@ acpi_status(*ACPI_INTERNAL_METHOD) (struct acpi_walk_state * walk_state); * Information structure for ACPI predefined names. * Each entry in the table contains the following items: * - * Name - The ACPI reserved name + * name - The ACPI reserved name * param_count - Number of arguments to the method * expected_return_btypes - Allowed type(s) for the return value */ @@ -404,6 +404,13 @@ struct acpi_gpe_handler_info { u8 originally_enabled; /* True if GPE was originally enabled */ }; +/* Notify info for implicit notify, multiple device objects */ + +struct acpi_gpe_notify_info { + struct acpi_namespace_node *device_node; /* Device to be notified */ + struct acpi_gpe_notify_info *next; +}; + struct acpi_gpe_notify_object { struct acpi_namespace_node *node; struct acpi_gpe_notify_object *next; @@ -412,7 +419,7 @@ struct acpi_gpe_notify_object { union acpi_gpe_dispatch_info { struct acpi_namespace_node *method_node; /* Method node for this GPE level */ struct acpi_gpe_handler_info *handler; /* Installed GPE handler */ - struct acpi_gpe_notify_object device; /* List of _PRW devices for implicit notify */ + struct acpi_gpe_notify_info *notify_list; /* List of _PRW devices for implicit notifies */ }; /* @@ -420,7 +427,7 @@ union acpi_gpe_dispatch_info { * NOTE: Important to keep this struct as small as possible. */ struct acpi_gpe_event_info { - union acpi_gpe_dispatch_info dispatch; /* Either Method or Handler */ + union acpi_gpe_dispatch_info dispatch; /* Either Method, Handler, or notify_list */ struct acpi_gpe_register_info *register_info; /* Backpointer to register info */ u8 flags; /* Misc info about this GPE */ u8 gpe_number; /* This GPE */ @@ -600,13 +607,22 @@ acpi_status(*acpi_parse_downwards) (struct acpi_walk_state * walk_state, typedef acpi_status(*acpi_parse_upwards) (struct acpi_walk_state * walk_state); +/* Global handlers for AML Notifies */ + +struct acpi_global_notify_handler { + acpi_notify_handler handler; + void *context; +}; + /* * Notify info - used to pass info to the deferred notify * handler/dispatcher. */ struct acpi_notify_info { - ACPI_STATE_COMMON struct acpi_namespace_node *node; - union acpi_operand_object *handler_obj; + ACPI_STATE_COMMON u8 handler_list_id; + struct acpi_namespace_node *node; + union acpi_operand_object *handler_list_head; + struct acpi_global_notify_handler *global; }; /* Generic state is union of structs above */ @@ -718,7 +734,7 @@ struct acpi_parse_obj_named { u32 name; /* 4-byte name or zero if no name */ }; -/* This version is used by the i_aSL compiler only */ +/* This version is used by the iASL compiler only */ #define ACPI_MAX_PARSEOP_NAME 20 @@ -787,6 +803,7 @@ struct acpi_parse_state { #define ACPI_PARSEOP_IGNORE 0x01 #define ACPI_PARSEOP_PARAMLIST 0x02 #define ACPI_PARSEOP_EMPTY_TERMLIST 0x04 +#define ACPI_PARSEOP_PREDEF_CHECKED 0x08 #define ACPI_PARSEOP_SPECIAL 0x10 /***************************************************************************** @@ -1075,4 +1092,18 @@ struct acpi_debug_mem_block { #define ACPI_MEM_LIST_MAX 1 #define ACPI_NUM_MEM_LISTS 2 +/***************************************************************************** + * + * Info/help support + * + ****************************************************************************/ + +struct ah_predefined_name { + char *name; + char *description; +#ifndef ACPI_ASL_COMPILER + char *action; +#endif +}; + #endif /* __ACLOCAL_H__ */ diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h index f119f473f71a..832b6198652e 100644 --- a/drivers/acpi/acpica/acmacros.h +++ b/drivers/acpi/acpica/acmacros.h @@ -62,7 +62,7 @@ * printf() format helpers */ -/* Split 64-bit integer into two 32-bit values. Use with %8.8_x%8.8_x */ +/* Split 64-bit integer into two 32-bit values. Use with %8.8X%8.8X */ #define ACPI_FORMAT_UINT64(i) ACPI_HIDWORD(i), ACPI_LODWORD(i) @@ -283,8 +283,8 @@ #define ACPI_INSERT_BITS(target, mask, source) target = ((target & (~(mask))) | (source & mask)) /* - * A struct acpi_namespace_node can appear in some contexts - * where a pointer to a union acpi_operand_object can also + * An object of type struct acpi_namespace_node can appear in some contexts + * where a pointer to an object of type union acpi_operand_object can also * appear. This macro is used to distinguish them. * * The "Descriptor" field is the first field in both structures. diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h index c065078ca83b..364a1303fb8f 100644 --- a/drivers/acpi/acpica/acobject.h +++ b/drivers/acpi/acpica/acobject.h @@ -113,8 +113,8 @@ struct acpi_object_integer { }; /* - * Note: The String and Buffer object must be identical through the Pointer - * and length elements. There is code that depends on this. + * Note: The String and Buffer object must be identical through the + * pointer and length elements. There is code that depends on this. * * Fields common to both Strings and Buffers */ @@ -206,8 +206,7 @@ struct acpi_object_method { * Common fields for objects that support ASL notifications */ #define ACPI_COMMON_NOTIFY_INFO \ - union acpi_operand_object *system_notify; /* Handler for system notifies */\ - union acpi_operand_object *device_notify; /* Handler for driver notifies */\ + union acpi_operand_object *notify_list[2]; /* Handlers for system/device notifies */\ union acpi_operand_object *handler; /* Handler for Address space */ struct acpi_object_notify_common { /* COMMON NOTIFY for POWER, PROCESSOR, DEVICE, and THERMAL */ @@ -296,10 +295,10 @@ struct acpi_object_buffer_field { struct acpi_object_notify_handler { ACPI_OBJECT_COMMON_HEADER struct acpi_namespace_node *node; /* Parent device */ - u32 handler_type; - acpi_notify_handler handler; + u32 handler_type; /* Type: Device/System/Both */ + acpi_notify_handler handler; /* Handler address */ void *context; - struct acpi_object_notify_handler *next; + union acpi_operand_object *next[2]; /* Device and System handler lists */ }; struct acpi_object_addr_handler { @@ -382,7 +381,7 @@ struct acpi_object_cache_list { /****************************************************************************** * - * union acpi_operand_object Descriptor - a giant union of all of the above + * union acpi_operand_object descriptor - a giant union of all of the above * *****************************************************************************/ diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h index bbb34c9be4e8..3080c017f5ba 100644 --- a/drivers/acpi/acpica/acpredef.h +++ b/drivers/acpi/acpica/acpredef.h @@ -140,7 +140,7 @@ enum acpi_return_package_types { * * The main entries in the table each contain the following items: * - * Name - The ACPI reserved name + * name - The ACPI reserved name * param_count - Number of arguments to the method * expected_btypes - Allowed type(s) for the return value. * 0 means that no return value is expected. @@ -511,14 +511,14 @@ static const union acpi_predefined_info predefined_names[] = {{"_TMP", 0, ACPI_RTYPE_INTEGER}}, {{"_TPC", 0, ACPI_RTYPE_INTEGER}}, {{"_TPT", 1, 0}}, - {{"_TRT", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 2_ref/6_int */ + {{"_TRT", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 2 Ref/6 Int */ {{{ACPI_PTYPE2, ACPI_RTYPE_REFERENCE, 2, ACPI_RTYPE_INTEGER}, 6, 0}}, - {{"_TSD", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 5_int with count */ + {{"_TSD", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 5 Int with count */ {{{ACPI_PTYPE2_COUNT,ACPI_RTYPE_INTEGER, 5,0}, 0,0}}, {{"_TSP", 0, ACPI_RTYPE_INTEGER}}, - {{"_TSS", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 5_int */ + {{"_TSS", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 5 Int */ {{{ACPI_PTYPE2, ACPI_RTYPE_INTEGER, 5,0}, 0,0}}, {{"_TST", 0, ACPI_RTYPE_INTEGER}}, diff --git a/drivers/acpi/acpica/acstruct.h b/drivers/acpi/acpica/acstruct.h index 0404df605bc1..f196e2c9a71f 100644 --- a/drivers/acpi/acpica/acstruct.h +++ b/drivers/acpi/acpica/acstruct.h @@ -68,7 +68,7 @@ #define ACPI_WALK_METHOD 0x01 #define ACPI_WALK_METHOD_RESTART 0x02 -/* Flags for i_aSL compiler only */ +/* Flags for iASL compiler only */ #define ACPI_WALK_CONST_REQUIRED 0x10 #define ACPI_WALK_CONST_OPTIONAL 0x20 diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h index 925ccf22101b..5035327ebccc 100644 --- a/drivers/acpi/acpica/acutils.h +++ b/drivers/acpi/acpica/acutils.h @@ -460,6 +460,8 @@ acpi_ut_short_divide(u64 in_dividend, /* * utmisc */ +void ut_convert_backslashes(char *pathname); + const char *acpi_ut_validate_exception(acpi_status status); u8 acpi_ut_is_pci_root_bridge(char *id); diff --git a/drivers/acpi/acpica/amlcode.h b/drivers/acpi/acpica/amlcode.h index 905280fec0fa..c26f8ff6c3b9 100644 --- a/drivers/acpi/acpica/amlcode.h +++ b/drivers/acpi/acpica/amlcode.h @@ -182,7 +182,7 @@ /* * Combination opcodes (actually two one-byte opcodes) - * Used by the disassembler and i_aSL compiler + * Used by the disassembler and iASL compiler */ #define AML_LGREATEREQUAL_OP (u16) 0x9295 #define AML_LLESSEQUAL_OP (u16) 0x9294 @@ -280,7 +280,7 @@ /* Multiple/complex types */ -#define ARGI_DATAOBJECT 0x12 /* Buffer, String, package or reference to a Node - Used only by size_of operator */ +#define ARGI_DATAOBJECT 0x12 /* Buffer, String, package or reference to a node - Used only by size_of operator */ #define ARGI_COMPLEXOBJ 0x13 /* Buffer, String, or package (Used by INDEX op only) */ #define ARGI_REF_OR_STRING 0x14 /* Reference or String (Used by DEREFOF op only) */ #define ARGI_REGION_OR_BUFFER 0x15 /* Used by LOAD op only */ diff --git a/drivers/acpi/acpica/amlresrc.h b/drivers/acpi/acpica/amlresrc.h index 7b2128f274e7..af4947956ec2 100644 --- a/drivers/acpi/acpica/amlresrc.h +++ b/drivers/acpi/acpica/amlresrc.h @@ -98,7 +98,7 @@ #define ACPI_RESTAG_TRANSLATION "_TRA" #define ACPI_RESTAG_TRANSTYPE "_TRS" /* Sparse(1), Dense(0) */ #define ACPI_RESTAG_TYPE "_TTP" /* Translation(1), Static (0) */ -#define ACPI_RESTAG_XFERTYPE "_SIZ" /* 8(0), 8_and16(1), 16(2) */ +#define ACPI_RESTAG_XFERTYPE "_SIZ" /* 8(0), 8And16(1), 16(2) */ #define ACPI_RESTAG_VENDORDATA "_VEN" /* Default sizes for "small" resource descriptors */ @@ -235,7 +235,7 @@ AML_RESOURCE_LARGE_HEADER_COMMON AML_RESOURCE_ADDRESS_COMMON}; struct aml_resource_extended_address64 { AML_RESOURCE_LARGE_HEADER_COMMON - AML_RESOURCE_ADDRESS_COMMON u8 revision_iD; + AML_RESOURCE_ADDRESS_COMMON u8 revision_ID; u8 reserved; u64 granularity; u64 minimum; diff --git a/drivers/acpi/acpica/dsargs.c b/drivers/acpi/acpica/dsargs.c index 80eb1900297f..c8b5e2565b98 100644 --- a/drivers/acpi/acpica/dsargs.c +++ b/drivers/acpi/acpica/dsargs.c @@ -62,7 +62,7 @@ acpi_ds_execute_arguments(struct acpi_namespace_node *node, * * FUNCTION: acpi_ds_execute_arguments * - * PARAMETERS: Node - Object NS node + * PARAMETERS: node - Object NS node * scope_node - Parent NS node * aml_length - Length of executable AML * aml_start - Pointer to the AML diff --git a/drivers/acpi/acpica/dscontrol.c b/drivers/acpi/acpica/dscontrol.c index effe4ca1133f..465f02134b89 100644 --- a/drivers/acpi/acpica/dscontrol.c +++ b/drivers/acpi/acpica/dscontrol.c @@ -56,7 +56,7 @@ ACPI_MODULE_NAME("dscontrol") * FUNCTION: acpi_ds_exec_begin_control_op * * PARAMETERS: walk_list - The list that owns the walk stack - * Op - The control Op + * op - The control Op * * RETURN: Status * @@ -153,7 +153,7 @@ acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state, * FUNCTION: acpi_ds_exec_end_control_op * * PARAMETERS: walk_list - The list that owns the walk stack - * Op - The control Op + * op - The control Op * * RETURN: Status * diff --git a/drivers/acpi/acpica/dsfield.c b/drivers/acpi/acpica/dsfield.c index cd243cf2cab2..3da6fd8530c5 100644 --- a/drivers/acpi/acpica/dsfield.c +++ b/drivers/acpi/acpica/dsfield.c @@ -53,16 +53,84 @@ ACPI_MODULE_NAME("dsfield") /* Local prototypes */ +#ifdef ACPI_ASL_COMPILER +#include "acdisasm.h" +static acpi_status +acpi_ds_create_external_region(acpi_status lookup_status, + union acpi_parse_object *op, + char *path, + struct acpi_walk_state *walk_state, + struct acpi_namespace_node **node); +#endif + static acpi_status acpi_ds_get_field_names(struct acpi_create_field_info *info, struct acpi_walk_state *walk_state, union acpi_parse_object *arg); +#ifdef ACPI_ASL_COMPILER +/******************************************************************************* + * + * FUNCTION: acpi_ds_create_external_region (iASL Disassembler only) + * + * PARAMETERS: lookup_status - Status from ns_lookup operation + * op - Op containing the Field definition and args + * path - Pathname of the region + * ` walk_state - Current method state + * node - Where the new region node is returned + * + * RETURN: Status + * + * DESCRIPTION: Add region to the external list if NOT_FOUND. Create a new + * region node/object. + * + ******************************************************************************/ + +static acpi_status +acpi_ds_create_external_region(acpi_status lookup_status, + union acpi_parse_object *op, + char *path, + struct acpi_walk_state *walk_state, + struct acpi_namespace_node **node) +{ + acpi_status status; + union acpi_operand_object *obj_desc; + + if (lookup_status != AE_NOT_FOUND) { + return (lookup_status); + } + + /* + * Table disassembly: + * operation_region not found. Generate an External for it, and + * insert the name into the namespace. + */ + acpi_dm_add_to_external_list(op, path, ACPI_TYPE_REGION, 0); + status = acpi_ns_lookup(walk_state->scope_info, path, ACPI_TYPE_REGION, + ACPI_IMODE_LOAD_PASS1, ACPI_NS_SEARCH_PARENT, + walk_state, node); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Must create and install a region object for the new node */ + + obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_REGION); + if (!obj_desc) { + return (AE_NO_MEMORY); + } + + obj_desc->region.node = *node; + status = acpi_ns_attach_object(*node, obj_desc, ACPI_TYPE_REGION); + return (status); +} +#endif + /******************************************************************************* * * FUNCTION: acpi_ds_create_buffer_field * - * PARAMETERS: Op - Current parse op (create_xXField) + * PARAMETERS: op - Current parse op (create_XXField) * walk_state - Current state * * RETURN: Status @@ -99,7 +167,7 @@ acpi_ds_create_buffer_field(union acpi_parse_object *op, arg = acpi_ps_get_arg(op, 3); } else { - /* For all other create_xXXField operators, name is the 3rd argument */ + /* For all other create_XXXField operators, name is the 3rd argument */ arg = acpi_ps_get_arg(op, 2); } @@ -203,9 +271,9 @@ acpi_ds_create_buffer_field(union acpi_parse_object *op, * * FUNCTION: acpi_ds_get_field_names * - * PARAMETERS: Info - create_field info structure + * PARAMETERS: info - create_field info structure * ` walk_state - Current method state - * Arg - First parser arg for the field name list + * arg - First parser arg for the field name list * * RETURN: Status * @@ -234,10 +302,10 @@ acpi_ds_get_field_names(struct acpi_create_field_info *info, while (arg) { /* * Four types of field elements are handled: - * 1) Name - Enters a new named field into the namespace - * 2) Offset - specifies a bit offset + * 1) name - Enters a new named field into the namespace + * 2) offset - specifies a bit offset * 3) access_as - changes the access mode/attributes - * 4) Connection - Associate a resource template with the field + * 4) connection - Associate a resource template with the field */ switch (arg->common.aml_opcode) { case AML_INT_RESERVEDFIELD_OP: @@ -389,7 +457,7 @@ acpi_ds_get_field_names(struct acpi_create_field_info *info, * * FUNCTION: acpi_ds_create_field * - * PARAMETERS: Op - Op containing the Field definition and args + * PARAMETERS: op - Op containing the Field definition and args * region_node - Object for the containing Operation Region * ` walk_state - Current method state * @@ -413,12 +481,19 @@ acpi_ds_create_field(union acpi_parse_object *op, /* First arg is the name of the parent op_region (must already exist) */ arg = op->common.value.arg; + if (!region_node) { status = acpi_ns_lookup(walk_state->scope_info, arg->common.value.name, ACPI_TYPE_REGION, ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, walk_state, ®ion_node); +#ifdef ACPI_ASL_COMPILER + status = acpi_ds_create_external_region(status, arg, + arg->common.value.name, + walk_state, + ®ion_node); +#endif if (ACPI_FAILURE(status)) { ACPI_ERROR_NAMESPACE(arg->common.value.name, status); return_ACPI_STATUS(status); @@ -446,7 +521,7 @@ acpi_ds_create_field(union acpi_parse_object *op, * * FUNCTION: acpi_ds_init_field_objects * - * PARAMETERS: Op - Op containing the Field definition and args + * PARAMETERS: op - Op containing the Field definition and args * ` walk_state - Current method state * * RETURN: Status @@ -561,7 +636,7 @@ acpi_ds_init_field_objects(union acpi_parse_object *op, * * FUNCTION: acpi_ds_create_bank_field * - * PARAMETERS: Op - Op containing the Field definition and args + * PARAMETERS: op - Op containing the Field definition and args * region_node - Object for the containing Operation Region * walk_state - Current method state * @@ -591,6 +666,12 @@ acpi_ds_create_bank_field(union acpi_parse_object *op, arg->common.value.name, ACPI_TYPE_REGION, ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, walk_state, ®ion_node); +#ifdef ACPI_ASL_COMPILER + status = acpi_ds_create_external_region(status, arg, + arg->common.value.name, + walk_state, + ®ion_node); +#endif if (ACPI_FAILURE(status)) { ACPI_ERROR_NAMESPACE(arg->common.value.name, status); return_ACPI_STATUS(status); @@ -645,7 +726,7 @@ acpi_ds_create_bank_field(union acpi_parse_object *op, * * FUNCTION: acpi_ds_create_index_field * - * PARAMETERS: Op - Op containing the Field definition and args + * PARAMETERS: op - Op containing the Field definition and args * region_node - Object for the containing Operation Region * ` walk_state - Current method state * diff --git a/drivers/acpi/acpica/dsinit.c b/drivers/acpi/acpica/dsinit.c index 9e5ac7f780a7..87eff701ecfa 100644 --- a/drivers/acpi/acpica/dsinit.c +++ b/drivers/acpi/acpica/dsinit.c @@ -60,8 +60,8 @@ acpi_ds_init_one_object(acpi_handle obj_handle, * FUNCTION: acpi_ds_init_one_object * * PARAMETERS: obj_handle - Node for the object - * Level - Current nesting level - * Context - Points to a init info struct + * level - Current nesting level + * context - Points to a init info struct * return_value - Not used * * RETURN: Status diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c index 00f5dab5bcc0..aa9a5d4e4052 100644 --- a/drivers/acpi/acpica/dsmethod.c +++ b/drivers/acpi/acpica/dsmethod.c @@ -61,7 +61,7 @@ acpi_ds_create_method_mutex(union acpi_operand_object *method_desc); * * FUNCTION: acpi_ds_method_error * - * PARAMETERS: Status - Execution status + * PARAMETERS: status - Execution status * walk_state - Current state * * RETURN: Status @@ -306,9 +306,9 @@ acpi_ds_begin_method_execution(struct acpi_namespace_node *method_node, * * FUNCTION: acpi_ds_call_control_method * - * PARAMETERS: Thread - Info for this thread + * PARAMETERS: thread - Info for this thread * this_walk_state - Current walk state - * Op - Current Op to be walked + * op - Current Op to be walked * * RETURN: Status * diff --git a/drivers/acpi/acpica/dsmthdat.c b/drivers/acpi/acpica/dsmthdat.c index b40bd507be5d..8d55cebaa656 100644 --- a/drivers/acpi/acpica/dsmthdat.c +++ b/drivers/acpi/acpica/dsmthdat.c @@ -177,7 +177,7 @@ void acpi_ds_method_data_delete_all(struct acpi_walk_state *walk_state) * * FUNCTION: acpi_ds_method_data_init_args * - * PARAMETERS: *Params - Pointer to a parameter list for the method + * PARAMETERS: *params - Pointer to a parameter list for the method * max_param_count - The arg count for this method * walk_state - Current walk state object * @@ -232,11 +232,11 @@ acpi_ds_method_data_init_args(union acpi_operand_object **params, * * FUNCTION: acpi_ds_method_data_get_node * - * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or + * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or * ACPI_REFCLASS_ARG - * Index - Which Local or Arg whose type to get + * index - Which Local or Arg whose type to get * walk_state - Current walk state object - * Node - Where the node is returned. + * node - Where the node is returned. * * RETURN: Status and node * @@ -296,10 +296,10 @@ acpi_ds_method_data_get_node(u8 type, * * FUNCTION: acpi_ds_method_data_set_value * - * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or + * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or * ACPI_REFCLASS_ARG - * Index - Which Local or Arg to get - * Object - Object to be inserted into the stack entry + * index - Which Local or Arg to get + * object - Object to be inserted into the stack entry * walk_state - Current walk state object * * RETURN: Status @@ -336,7 +336,7 @@ acpi_ds_method_data_set_value(u8 type, * Increment ref count so object can't be deleted while installed. * NOTE: We do not copy the object in order to preserve the call by * reference semantics of ACPI Control Method invocation. - * (See ACPI Specification 2.0_c) + * (See ACPI Specification 2.0C) */ acpi_ut_add_reference(object); @@ -350,9 +350,9 @@ acpi_ds_method_data_set_value(u8 type, * * FUNCTION: acpi_ds_method_data_get_value * - * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or + * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or * ACPI_REFCLASS_ARG - * Index - Which local_var or argument to get + * index - Which localVar or argument to get * walk_state - Current walk state object * dest_desc - Where Arg or Local value is returned * @@ -458,9 +458,9 @@ acpi_ds_method_data_get_value(u8 type, * * FUNCTION: acpi_ds_method_data_delete_value * - * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or + * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or * ACPI_REFCLASS_ARG - * Index - Which local_var or argument to delete + * index - Which localVar or argument to delete * walk_state - Current walk state object * * RETURN: None @@ -515,9 +515,9 @@ acpi_ds_method_data_delete_value(u8 type, * * FUNCTION: acpi_ds_store_object_to_local * - * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or + * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or * ACPI_REFCLASS_ARG - * Index - Which Local or Arg to set + * index - Which Local or Arg to set * obj_desc - Value to be stored * walk_state - Current walk state * @@ -670,8 +670,8 @@ acpi_ds_store_object_to_local(u8 type, * * FUNCTION: acpi_ds_method_data_get_type * - * PARAMETERS: Opcode - Either AML_LOCAL_OP or AML_ARG_OP - * Index - Which Local or Arg whose type to get + * PARAMETERS: opcode - Either AML_LOCAL_OP or AML_ARG_OP + * index - Which Local or Arg whose type to get * walk_state - Current walk state object * * RETURN: Data type of current value of the selected Arg or Local diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c index d7045ca3e32a..68592dd34960 100644 --- a/drivers/acpi/acpica/dsobject.c +++ b/drivers/acpi/acpica/dsobject.c @@ -64,7 +64,7 @@ acpi_ds_build_internal_object(struct acpi_walk_state *walk_state, * FUNCTION: acpi_ds_build_internal_object * * PARAMETERS: walk_state - Current walk state - * Op - Parser object to be translated + * op - Parser object to be translated * obj_desc_ptr - Where the ACPI internal object is returned * * RETURN: Status @@ -250,7 +250,7 @@ acpi_ds_build_internal_object(struct acpi_walk_state *walk_state, * FUNCTION: acpi_ds_build_internal_buffer_obj * * PARAMETERS: walk_state - Current walk state - * Op - Parser object to be translated + * op - Parser object to be translated * buffer_length - Length of the buffer * obj_desc_ptr - Where the ACPI internal object is returned * @@ -354,7 +354,7 @@ acpi_ds_build_internal_buffer_obj(struct acpi_walk_state *walk_state, * FUNCTION: acpi_ds_build_internal_package_obj * * PARAMETERS: walk_state - Current walk state - * Op - Parser object to be translated + * op - Parser object to be translated * element_count - Number of elements in the package - this is * the num_elements argument to Package() * obj_desc_ptr - Where the ACPI internal object is returned @@ -547,8 +547,8 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state, * FUNCTION: acpi_ds_create_node * * PARAMETERS: walk_state - Current walk state - * Node - NS Node to be initialized - * Op - Parser object to be translated + * node - NS Node to be initialized + * op - Parser object to be translated * * RETURN: Status * @@ -611,8 +611,8 @@ acpi_ds_create_node(struct acpi_walk_state *walk_state, * FUNCTION: acpi_ds_init_object_from_op * * PARAMETERS: walk_state - Current walk state - * Op - Parser op used to init the internal object - * Opcode - AML opcode associated with the object + * op - Parser op used to init the internal object + * opcode - AML opcode associated with the object * ret_obj_desc - Namespace object to be initialized * * RETURN: Status diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c index e5eff7585102..aa34d8984d34 100644 --- a/drivers/acpi/acpica/dsopcode.c +++ b/drivers/acpi/acpica/dsopcode.c @@ -286,7 +286,7 @@ acpi_ds_init_buffer_field(u16 aml_opcode, * FUNCTION: acpi_ds_eval_buffer_field_operands * * PARAMETERS: walk_state - Current walk - * Op - A valid buffer_field Op object + * op - A valid buffer_field Op object * * RETURN: Status * @@ -370,7 +370,7 @@ acpi_ds_eval_buffer_field_operands(struct acpi_walk_state *walk_state, * FUNCTION: acpi_ds_eval_region_operands * * PARAMETERS: walk_state - Current walk - * Op - A valid region Op object + * op - A valid region Op object * * RETURN: Status * @@ -397,7 +397,7 @@ acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state, */ node = op->common.node; - /* next_op points to the op that holds the space_iD */ + /* next_op points to the op that holds the space_ID */ next_op = op->common.value.arg; @@ -461,7 +461,7 @@ acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state, * FUNCTION: acpi_ds_eval_table_region_operands * * PARAMETERS: walk_state - Current walk - * Op - A valid region Op object + * op - A valid region Op object * * RETURN: Status * @@ -560,7 +560,7 @@ acpi_ds_eval_table_region_operands(struct acpi_walk_state *walk_state, * FUNCTION: acpi_ds_eval_data_object_operands * * PARAMETERS: walk_state - Current walk - * Op - A valid data_object Op object + * op - A valid data_object Op object * obj_desc - data_object * * RETURN: Status @@ -662,7 +662,7 @@ acpi_ds_eval_data_object_operands(struct acpi_walk_state *walk_state, * FUNCTION: acpi_ds_eval_bank_field_operands * * PARAMETERS: walk_state - Current walk - * Op - A valid bank_field Op object + * op - A valid bank_field Op object * * RETURN: Status * diff --git a/drivers/acpi/acpica/dsutils.c b/drivers/acpi/acpica/dsutils.c index 1abcda31037f..73a5447475f5 100644 --- a/drivers/acpi/acpica/dsutils.c +++ b/drivers/acpi/acpica/dsutils.c @@ -157,7 +157,7 @@ acpi_ds_do_implicit_return(union acpi_operand_object *return_desc, * * FUNCTION: acpi_ds_is_result_used * - * PARAMETERS: Op - Current Op + * PARAMETERS: op - Current Op * walk_state - Current State * * RETURN: TRUE if result is used, FALSE otherwise @@ -323,7 +323,7 @@ acpi_ds_is_result_used(union acpi_parse_object * op, * * FUNCTION: acpi_ds_delete_result_if_not_used * - * PARAMETERS: Op - Current parse Op + * PARAMETERS: op - Current parse Op * result_obj - Result of the operation * walk_state - Current state * @@ -445,7 +445,7 @@ void acpi_ds_clear_operands(struct acpi_walk_state *walk_state) * FUNCTION: acpi_ds_create_operand * * PARAMETERS: walk_state - Current walk state - * Arg - Parse object for the argument + * arg - Parse object for the argument * arg_index - Which argument (zero based) * * RETURN: Status diff --git a/drivers/acpi/acpica/dswscope.c b/drivers/acpi/acpica/dswscope.c index 9e9490a9cbf0..f6c4295470ae 100644 --- a/drivers/acpi/acpica/dswscope.c +++ b/drivers/acpi/acpica/dswscope.c @@ -85,8 +85,8 @@ void acpi_ds_scope_stack_clear(struct acpi_walk_state *walk_state) * * FUNCTION: acpi_ds_scope_stack_push * - * PARAMETERS: Node - Name to be made current - * Type - Type of frame being pushed + * PARAMETERS: node - Name to be made current + * type - Type of frame being pushed * walk_state - Current state * * RETURN: Status diff --git a/drivers/acpi/acpica/dswstate.c b/drivers/acpi/acpica/dswstate.c index c9c2ac13e7cc..d0e6555061e4 100644 --- a/drivers/acpi/acpica/dswstate.c +++ b/drivers/acpi/acpica/dswstate.c @@ -58,7 +58,7 @@ static acpi_status acpi_ds_result_stack_pop(struct acpi_walk_state *ws); * * FUNCTION: acpi_ds_result_pop * - * PARAMETERS: Object - Where to return the popped object + * PARAMETERS: object - Where to return the popped object * walk_state - Current Walk state * * RETURN: Status @@ -132,7 +132,7 @@ acpi_ds_result_pop(union acpi_operand_object **object, * * FUNCTION: acpi_ds_result_push * - * PARAMETERS: Object - Where to return the popped object + * PARAMETERS: object - Where to return the popped object * walk_state - Current Walk state * * RETURN: Status @@ -296,7 +296,7 @@ static acpi_status acpi_ds_result_stack_pop(struct acpi_walk_state *walk_state) * * FUNCTION: acpi_ds_obj_stack_push * - * PARAMETERS: Object - Object to push + * PARAMETERS: object - Object to push * walk_state - Current Walk state * * RETURN: Status @@ -433,7 +433,7 @@ acpi_ds_obj_stack_pop_and_delete(u32 pop_count, * * FUNCTION: acpi_ds_get_current_walk_state * - * PARAMETERS: Thread - Get current active state for this Thread + * PARAMETERS: thread - Get current active state for this Thread * * RETURN: Pointer to the current walk state * @@ -462,7 +462,7 @@ struct acpi_walk_state *acpi_ds_get_current_walk_state(struct acpi_thread_state * FUNCTION: acpi_ds_push_walk_state * * PARAMETERS: walk_state - State to push - * Thread - Thread state object + * thread - Thread state object * * RETURN: None * @@ -486,7 +486,7 @@ acpi_ds_push_walk_state(struct acpi_walk_state *walk_state, * * FUNCTION: acpi_ds_pop_walk_state * - * PARAMETERS: Thread - Current thread state + * PARAMETERS: thread - Current thread state * * RETURN: A walk_state object popped from the thread's stack * @@ -525,9 +525,9 @@ struct acpi_walk_state *acpi_ds_pop_walk_state(struct acpi_thread_state *thread) * FUNCTION: acpi_ds_create_walk_state * * PARAMETERS: owner_id - ID for object creation - * Origin - Starting point for this walk + * origin - Starting point for this walk * method_desc - Method object - * Thread - Current thread state + * thread - Current thread state * * RETURN: Pointer to the new walk state. * @@ -578,11 +578,11 @@ struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id, union * FUNCTION: acpi_ds_init_aml_walk * * PARAMETERS: walk_state - New state to be initialized - * Op - Current parse op + * op - Current parse op * method_node - Control method NS node, if any * aml_start - Start of AML * aml_length - Length of AML - * Info - Method info block (params, etc.) + * info - Method info block (params, etc.) * pass_number - 1, 2, or 3 * * RETURN: Status diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c index 07e4dc44f81c..d4acfbbe5b29 100644 --- a/drivers/acpi/acpica/evevent.c +++ b/drivers/acpi/acpica/evevent.c @@ -251,7 +251,7 @@ u32 acpi_ev_fixed_event_detect(void) * * FUNCTION: acpi_ev_fixed_event_dispatch * - * PARAMETERS: Event - Event type + * PARAMETERS: event - Event type * * RETURN: INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED * diff --git a/drivers/acpi/acpica/evglock.c b/drivers/acpi/acpica/evglock.c index cfeab38795d8..af14a7137632 100644 --- a/drivers/acpi/acpica/evglock.c +++ b/drivers/acpi/acpica/evglock.c @@ -135,7 +135,7 @@ acpi_status acpi_ev_remove_global_lock_handler(void) * * FUNCTION: acpi_ev_global_lock_handler * - * PARAMETERS: Context - From thread interface, not used + * PARAMETERS: context - From thread interface, not used * * RETURN: ACPI_INTERRUPT_HANDLED * @@ -182,7 +182,7 @@ static u32 acpi_ev_global_lock_handler(void *context) * * FUNCTION: acpi_ev_acquire_global_lock * - * PARAMETERS: Timeout - Max time to wait for the lock, in millisec. + * PARAMETERS: timeout - Max time to wait for the lock, in millisec. * * RETURN: Status * diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index 8ba0e5f17091..afbd5cb391f6 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -466,7 +466,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) acpi_status status; struct acpi_gpe_event_info *local_gpe_event_info; struct acpi_evaluate_info *info; - struct acpi_gpe_notify_object *notify_object; + struct acpi_gpe_notify_info *notify; ACPI_FUNCTION_TRACE(ev_asynch_execute_gpe_method); @@ -517,17 +517,17 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) * completes. The notify handlers are NOT invoked synchronously * from this thread -- because handlers may in turn run other * control methods. + * + * June 2012: Expand implicit notify mechanism to support + * notifies on multiple device objects. */ - status = acpi_ev_queue_notify_request( - local_gpe_event_info->dispatch.device.node, - ACPI_NOTIFY_DEVICE_WAKE); + notify = local_gpe_event_info->dispatch.notify_list; + while (ACPI_SUCCESS(status) && notify) { + status = + acpi_ev_queue_notify_request(notify->device_node, + ACPI_NOTIFY_DEVICE_WAKE); - notify_object = local_gpe_event_info->dispatch.device.next; - while (ACPI_SUCCESS(status) && notify_object) { - status = acpi_ev_queue_notify_request( - notify_object->node, - ACPI_NOTIFY_DEVICE_WAKE); - notify_object = notify_object->next; + notify = notify->next; } break; diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index 23a3ca86b2eb..8cf4c104c7b7 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -318,7 +318,7 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block) * FUNCTION: acpi_ev_create_gpe_block * * PARAMETERS: gpe_device - Handle to the parent GPE block - * gpe_block_address - Address and space_iD + * gpe_block_address - Address and space_ID * register_count - Number of GPE register pairs in the block * gpe_block_base_number - Starting GPE number for the block * interrupt_number - H/W interrupt for the block diff --git a/drivers/acpi/acpica/evgpeutil.c b/drivers/acpi/acpica/evgpeutil.c index 3c43796b8361..cb50dd91bc18 100644 --- a/drivers/acpi/acpica/evgpeutil.c +++ b/drivers/acpi/acpica/evgpeutil.c @@ -54,7 +54,7 @@ ACPI_MODULE_NAME("evgpeutil") * FUNCTION: acpi_ev_walk_gpe_list * * PARAMETERS: gpe_walk_callback - Routine called for each GPE block - * Context - Value passed to callback + * context - Value passed to callback * * RETURN: Status * @@ -347,6 +347,8 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, void *context) { struct acpi_gpe_event_info *gpe_event_info; + struct acpi_gpe_notify_info *notify; + struct acpi_gpe_notify_info *next; u32 i; u32 j; @@ -365,10 +367,28 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == ACPI_GPE_DISPATCH_HANDLER) { + + /* Delete an installed handler block */ + ACPI_FREE(gpe_event_info->dispatch.handler); gpe_event_info->dispatch.handler = NULL; gpe_event_info->flags &= ~ACPI_GPE_DISPATCH_MASK; + } else if ((gpe_event_info-> + flags & ACPI_GPE_DISPATCH_MASK) == + ACPI_GPE_DISPATCH_NOTIFY) { + + /* Delete the implicit notification device list */ + + notify = gpe_event_info->dispatch.notify_list; + while (notify) { + next = notify->next; + ACPI_FREE(notify); + notify = next; + } + gpe_event_info->dispatch.notify_list = NULL; + gpe_event_info->flags &= + ~ACPI_GPE_DISPATCH_MASK; } } } diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index 51ef9f5e002d..51f537937c1f 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -56,7 +56,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context); * * FUNCTION: acpi_ev_is_notify_object * - * PARAMETERS: Node - Node to check + * PARAMETERS: node - Node to check * * RETURN: TRUE if notifies allowed on this object * @@ -86,7 +86,7 @@ u8 acpi_ev_is_notify_object(struct acpi_namespace_node *node) * * FUNCTION: acpi_ev_queue_notify_request * - * PARAMETERS: Node - NS node for the notified object + * PARAMETERS: node - NS node for the notified object * notify_value - Value from the Notify() request * * RETURN: Status @@ -101,102 +101,77 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node, u32 notify_value) { union acpi_operand_object *obj_desc; - union acpi_operand_object *handler_obj = NULL; - union acpi_generic_state *notify_info; + union acpi_operand_object *handler_list_head = NULL; + union acpi_generic_state *info; + u8 handler_list_id = 0; acpi_status status = AE_OK; ACPI_FUNCTION_NAME(ev_queue_notify_request); + /* Are Notifies allowed on this object? */ + + if (!acpi_ev_is_notify_object(node)) { + return (AE_TYPE); + } + + /* Get the correct notify list type (System or Device) */ + + if (notify_value <= ACPI_MAX_SYS_NOTIFY) { + handler_list_id = ACPI_SYSTEM_HANDLER_LIST; + } else { + handler_list_id = ACPI_DEVICE_HANDLER_LIST; + } + + /* Get the notify object attached to the namespace Node */ + + obj_desc = acpi_ns_get_attached_object(node); + if (obj_desc) { + + /* We have an attached object, Get the correct handler list */ + + handler_list_head = + obj_desc->common_notify.notify_list[handler_list_id]; + } + /* - * For value 0x03 (Ejection Request), may need to run a device method. - * For value 0x02 (Device Wake), if _PRW exists, may need to run - * the _PS0 method. - * For value 0x80 (Status Change) on the power button or sleep button, - * initiate soft-off or sleep operation. - * - * For all cases, simply dispatch the notify to the handler. + * If there is no notify handler (Global or Local) + * for this object, just ignore the notify */ + if (!acpi_gbl_global_notify[handler_list_id].handler + && !handler_list_head) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "No notify handler for Notify, ignoring (%4.4s, %X) node %p\n", + acpi_ut_get_node_name(node), notify_value, + node)); + + return (AE_OK); + } + + /* Setup notify info and schedule the notify dispatcher */ + + info = acpi_ut_create_generic_state(); + if (!info) { + return (AE_NO_MEMORY); + } + + info->common.descriptor_type = ACPI_DESC_TYPE_STATE_NOTIFY; + + info->notify.node = node; + info->notify.value = (u16)notify_value; + info->notify.handler_list_id = handler_list_id; + info->notify.handler_list_head = handler_list_head; + info->notify.global = &acpi_gbl_global_notify[handler_list_id]; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Dispatching Notify on [%4.4s] (%s) Value 0x%2.2X (%s) Node %p\n", acpi_ut_get_node_name(node), acpi_ut_get_type_name(node->type), notify_value, acpi_ut_get_notify_name(notify_value), node)); - /* Get the notify object attached to the NS Node */ - - obj_desc = acpi_ns_get_attached_object(node); - if (obj_desc) { - - /* We have the notify object, Get the correct handler */ - - switch (node->type) { - - /* Notify is allowed only on these types */ - - case ACPI_TYPE_DEVICE: - case ACPI_TYPE_THERMAL: - case ACPI_TYPE_PROCESSOR: - - if (notify_value <= ACPI_MAX_SYS_NOTIFY) { - handler_obj = - obj_desc->common_notify.system_notify; - } else { - handler_obj = - obj_desc->common_notify.device_notify; - } - break; - - default: - - /* All other types are not supported */ - - return (AE_TYPE); - } - } - - /* - * If there is a handler to run, schedule the dispatcher. - * Check for: - * 1) Global system notify handler - * 2) Global device notify handler - * 3) Per-device notify handler - */ - if ((acpi_gbl_system_notify.handler && - (notify_value <= ACPI_MAX_SYS_NOTIFY)) || - (acpi_gbl_device_notify.handler && - (notify_value > ACPI_MAX_SYS_NOTIFY)) || handler_obj) { - notify_info = acpi_ut_create_generic_state(); - if (!notify_info) { - return (AE_NO_MEMORY); - } - - if (!handler_obj) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Executing system notify handler for Notify (%4.4s, %X) " - "node %p\n", - acpi_ut_get_node_name(node), - notify_value, node)); - } - - notify_info->common.descriptor_type = - ACPI_DESC_TYPE_STATE_NOTIFY; - notify_info->notify.node = node; - notify_info->notify.value = (u16) notify_value; - notify_info->notify.handler_obj = handler_obj; - - status = - acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_ev_notify_dispatch, - notify_info); - if (ACPI_FAILURE(status)) { - acpi_ut_delete_generic_state(notify_info); - } - } else { - /* There is no notify handler (per-device or system) for this device */ - - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "No notify handler for Notify (%4.4s, %X) node %p\n", - acpi_ut_get_node_name(node), notify_value, - node)); + status = acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_ev_notify_dispatch, + info); + if (ACPI_FAILURE(status)) { + acpi_ut_delete_generic_state(info); } return (status); @@ -206,7 +181,7 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node, * * FUNCTION: acpi_ev_notify_dispatch * - * PARAMETERS: Context - To be passed to the notify handler + * PARAMETERS: context - To be passed to the notify handler * * RETURN: None. * @@ -217,60 +192,34 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node, static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context) { - union acpi_generic_state *notify_info = - (union acpi_generic_state *)context; - acpi_notify_handler global_handler = NULL; - void *global_context = NULL; + union acpi_generic_state *info = (union acpi_generic_state *)context; union acpi_operand_object *handler_obj; ACPI_FUNCTION_ENTRY(); - /* - * We will invoke a global notify handler if installed. This is done - * _before_ we invoke the per-device handler attached to the device. - */ - if (notify_info->notify.value <= ACPI_MAX_SYS_NOTIFY) { + /* Invoke a global notify handler if installed */ - /* Global system notification handler */ - - if (acpi_gbl_system_notify.handler) { - global_handler = acpi_gbl_system_notify.handler; - global_context = acpi_gbl_system_notify.context; - } - } else { - /* Global driver notification handler */ - - if (acpi_gbl_device_notify.handler) { - global_handler = acpi_gbl_device_notify.handler; - global_context = acpi_gbl_device_notify.context; - } + if (info->notify.global->handler) { + info->notify.global->handler(info->notify.node, + info->notify.value, + info->notify.global->context); } - /* Invoke the system handler first, if present */ + /* Now invoke the local notify handler(s) if any are installed */ - if (global_handler) { - global_handler(notify_info->notify.node, - notify_info->notify.value, global_context); - } + handler_obj = info->notify.handler_list_head; + while (handler_obj) { + handler_obj->notify.handler(info->notify.node, + info->notify.value, + handler_obj->notify.context); - /* Now invoke the per-device handler, if present */ - - handler_obj = notify_info->notify.handler_obj; - if (handler_obj) { - struct acpi_object_notify_handler *notifier; - - notifier = &handler_obj->notify; - while (notifier) { - notifier->handler(notify_info->notify.node, - notify_info->notify.value, - notifier->context); - notifier = notifier->next; - } + handler_obj = + handler_obj->notify.next[info->notify.handler_list_id]; } /* All done with the info object */ - acpi_ut_delete_generic_state(notify_info); + acpi_ut_delete_generic_state(info); } #if (!ACPI_REDUCED_HARDWARE) diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c index 1b0180a1b798..0cc6a16fedc7 100644 --- a/drivers/acpi/acpica/evregion.c +++ b/drivers/acpi/acpica/evregion.c @@ -150,7 +150,7 @@ acpi_status acpi_ev_install_region_handlers(void) * * FUNCTION: acpi_ev_has_default_handler * - * PARAMETERS: Node - Namespace node for the device + * PARAMETERS: node - Namespace node for the device * space_id - The address space ID * * RETURN: TRUE if default handler is installed, FALSE otherwise @@ -244,7 +244,7 @@ acpi_status acpi_ev_initialize_op_regions(void) * FUNCTION: acpi_ev_execute_reg_method * * PARAMETERS: region_obj - Region object - * Function - Passed to _REG: On (1) or Off (0) + * function - Passed to _REG: On (1) or Off (0) * * RETURN: Status * @@ -286,10 +286,10 @@ acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function) /* * The _REG method has two arguments: * - * Arg0 - Integer: + * arg0 - Integer: * Operation region space ID Same value as region_obj->Region.space_id * - * Arg1 - Integer: + * arg1 - Integer: * connection status 1 for connecting the handler, 0 for disconnecting * the handler (Passed as a parameter) */ @@ -330,10 +330,10 @@ acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function) * * PARAMETERS: region_obj - Internal region object * field_obj - Corresponding field. Can be NULL. - * Function - Read or Write operation + * function - Read or Write operation * region_offset - Where in the region to read or write * bit_width - Field width in bits (8, 16, 32, or 64) - * Value - Pointer to in or out value, must be + * value - Pointer to in or out value, must be * a full 64-bit integer * * RETURN: Status @@ -840,11 +840,11 @@ acpi_ev_install_handler(acpi_handle obj_handle, * * FUNCTION: acpi_ev_install_space_handler * - * PARAMETERS: Node - Namespace node for the device + * PARAMETERS: node - Namespace node for the device * space_id - The address space ID - * Handler - Address of the handler - * Setup - Address of the setup function - * Context - Value passed to the handler on each access + * handler - Address of the handler + * setup - Address of the setup function + * context - Value passed to the handler on each access * * RETURN: Status * @@ -1061,7 +1061,7 @@ acpi_ev_install_space_handler(struct acpi_namespace_node * node, * * FUNCTION: acpi_ev_execute_reg_methods * - * PARAMETERS: Node - Namespace node for the device + * PARAMETERS: node - Namespace node for the device * space_id - The address space ID * * RETURN: Status @@ -1104,7 +1104,7 @@ acpi_ev_execute_reg_methods(struct acpi_namespace_node *node, * * PARAMETERS: walk_namespace callback * - * DESCRIPTION: Run _REG method for region objects of the requested space_iD + * DESCRIPTION: Run _REG method for region objects of the requested spaceID * ******************************************************************************/ diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c index 819c17f5897a..4c1c8261166f 100644 --- a/drivers/acpi/acpica/evrgnini.c +++ b/drivers/acpi/acpica/evrgnini.c @@ -56,8 +56,8 @@ static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node); * * FUNCTION: acpi_ev_system_memory_region_setup * - * PARAMETERS: Handle - Region we are interested in - * Function - Start or stop + * PARAMETERS: handle - Region we are interested in + * function - Start or stop * handler_context - Address space handler context * region_context - Region specific context * @@ -118,8 +118,8 @@ acpi_ev_system_memory_region_setup(acpi_handle handle, * * FUNCTION: acpi_ev_io_space_region_setup * - * PARAMETERS: Handle - Region we are interested in - * Function - Start or stop + * PARAMETERS: handle - Region we are interested in + * function - Start or stop * handler_context - Address space handler context * region_context - Region specific context * @@ -149,8 +149,8 @@ acpi_ev_io_space_region_setup(acpi_handle handle, * * FUNCTION: acpi_ev_pci_config_region_setup * - * PARAMETERS: Handle - Region we are interested in - * Function - Start or stop + * PARAMETERS: handle - Region we are interested in + * function - Start or stop * handler_context - Address space handler context * region_context - Region specific context * @@ -338,7 +338,7 @@ acpi_ev_pci_config_region_setup(acpi_handle handle, * * FUNCTION: acpi_ev_is_pci_root_bridge * - * PARAMETERS: Node - Device node being examined + * PARAMETERS: node - Device node being examined * * RETURN: TRUE if device is a PCI/PCI-Express Root Bridge * @@ -393,14 +393,14 @@ static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node) * * FUNCTION: acpi_ev_pci_bar_region_setup * - * PARAMETERS: Handle - Region we are interested in - * Function - Start or stop + * PARAMETERS: handle - Region we are interested in + * function - Start or stop * handler_context - Address space handler context * region_context - Region specific context * * RETURN: Status * - * DESCRIPTION: Setup a pci_bAR operation region + * DESCRIPTION: Setup a pci_BAR operation region * * MUTEX: Assumes namespace is not locked * @@ -420,8 +420,8 @@ acpi_ev_pci_bar_region_setup(acpi_handle handle, * * FUNCTION: acpi_ev_cmos_region_setup * - * PARAMETERS: Handle - Region we are interested in - * Function - Start or stop + * PARAMETERS: handle - Region we are interested in + * function - Start or stop * handler_context - Address space handler context * region_context - Region specific context * @@ -447,8 +447,8 @@ acpi_ev_cmos_region_setup(acpi_handle handle, * * FUNCTION: acpi_ev_default_region_setup * - * PARAMETERS: Handle - Region we are interested in - * Function - Start or stop + * PARAMETERS: handle - Region we are interested in + * function - Start or stop * handler_context - Address space handler context * region_context - Region specific context * diff --git a/drivers/acpi/acpica/evsci.c b/drivers/acpi/acpica/evsci.c index 6a57aa2d70d1..f9661e2b46a9 100644 --- a/drivers/acpi/acpica/evsci.c +++ b/drivers/acpi/acpica/evsci.c @@ -56,7 +56,7 @@ static u32 ACPI_SYSTEM_XFACE acpi_ev_sci_xrupt_handler(void *context); * * FUNCTION: acpi_ev_sci_xrupt_handler * - * PARAMETERS: Context - Calling Context + * PARAMETERS: context - Calling Context * * RETURN: Status code indicates whether interrupt was handled. * @@ -96,7 +96,7 @@ static u32 ACPI_SYSTEM_XFACE acpi_ev_sci_xrupt_handler(void *context) * * FUNCTION: acpi_ev_gpe_xrupt_handler * - * PARAMETERS: Context - Calling Context + * PARAMETERS: context - Calling Context * * RETURN: Status code indicates whether interrupt was handled. * diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c index 44bef5744ebb..7587eb6c9584 100644 --- a/drivers/acpi/acpica/evxface.c +++ b/drivers/acpi/acpica/evxface.c @@ -52,88 +52,27 @@ ACPI_MODULE_NAME("evxface") -/******************************************************************************* - * - * FUNCTION: acpi_populate_handler_object - * - * PARAMETERS: handler_obj - Handler object to populate - * handler_type - The type of handler: - * ACPI_SYSTEM_NOTIFY: system_handler (00-7f) - * ACPI_DEVICE_NOTIFY: driver_handler (80-ff) - * ACPI_ALL_NOTIFY: both system and device - * handler - Address of the handler - * context - Value passed to the handler on each GPE - * next - Address of a handler object to link to - * - * RETURN: None - * - * DESCRIPTION: Populate a handler object. - * - ******************************************************************************/ -static void -acpi_populate_handler_object(struct acpi_object_notify_handler *handler_obj, - u32 handler_type, - acpi_notify_handler handler, void *context, - struct acpi_object_notify_handler *next) -{ - handler_obj->handler_type = handler_type; - handler_obj->handler = handler; - handler_obj->context = context; - handler_obj->next = next; -} - -/******************************************************************************* - * - * FUNCTION: acpi_add_handler_object - * - * PARAMETERS: parent_obj - Parent of the new object - * handler - Address of the handler - * context - Value passed to the handler on each GPE - * - * RETURN: Status - * - * DESCRIPTION: Create a new handler object and populate it. - * - ******************************************************************************/ -static acpi_status -acpi_add_handler_object(struct acpi_object_notify_handler *parent_obj, - acpi_notify_handler handler, void *context) -{ - struct acpi_object_notify_handler *handler_obj; - - /* The parent must not be a defice notify handler object. */ - if (parent_obj->handler_type & ACPI_DEVICE_NOTIFY) - return AE_BAD_PARAMETER; - - handler_obj = ACPI_ALLOCATE_ZEROED(sizeof(*handler_obj)); - if (!handler_obj) - return AE_NO_MEMORY; - - acpi_populate_handler_object(handler_obj, - ACPI_SYSTEM_NOTIFY, - handler, context, - parent_obj->next); - parent_obj->next = handler_obj; - - return AE_OK; -} - - /******************************************************************************* * * FUNCTION: acpi_install_notify_handler * * PARAMETERS: Device - The device for which notifies will be handled * handler_type - The type of handler: - * ACPI_SYSTEM_NOTIFY: system_handler (00-7f) - * ACPI_DEVICE_NOTIFY: driver_handler (80-ff) - * ACPI_ALL_NOTIFY: both system and device + * ACPI_SYSTEM_NOTIFY: System Handler (00-7F) + * ACPI_DEVICE_NOTIFY: Device Handler (80-FF) + * ACPI_ALL_NOTIFY: Both System and Device * Handler - Address of the handler * Context - Value passed to the handler on each GPE * * RETURN: Status * - * DESCRIPTION: Install a handler for notifies on an ACPI device + * DESCRIPTION: Install a handler for notifications on an ACPI Device, + * thermal_zone, or Processor object. + * + * NOTES: The Root namespace object may have only one handler for each + * type of notify (System/Device). Device/Thermal/Processor objects + * may have one device notify handler, and multiple system notify + * handlers. * ******************************************************************************/ acpi_status @@ -141,17 +80,19 @@ acpi_install_notify_handler(acpi_handle device, u32 handler_type, acpi_notify_handler handler, void *context) { + struct acpi_namespace_node *node = + ACPI_CAST_PTR(struct acpi_namespace_node, device); union acpi_operand_object *obj_desc; - union acpi_operand_object *notify_obj; - struct acpi_namespace_node *node; + union acpi_operand_object *handler_obj; acpi_status status; + u32 i; ACPI_FUNCTION_TRACE(acpi_install_notify_handler); /* Parameter validation */ - if ((!device) || - (!handler) || (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) { + if ((!device) || (!handler) || (!handler_type) || + (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) { return_ACPI_STATUS(AE_BAD_PARAMETER); } @@ -160,144 +101,112 @@ acpi_install_notify_handler(acpi_handle device, return_ACPI_STATUS(status); } - /* Convert and validate the device handle */ - - node = acpi_ns_validate_handle(device); - if (!node) { - status = AE_BAD_PARAMETER; - goto unlock_and_exit; - } - /* * Root Object: * Registering a notify handler on the root object indicates that the * caller wishes to receive notifications for all objects. Note that - * only one global handler can be regsitered (per notify type). + * only one global handler can be registered per notify type. + * Ensure that a handler is not already installed. */ if (device == ACPI_ROOT_OBJECT) { - - /* Make sure the handler is not already installed */ - - if (((handler_type & ACPI_SYSTEM_NOTIFY) && - acpi_gbl_system_notify.handler) || - ((handler_type & ACPI_DEVICE_NOTIFY) && - acpi_gbl_device_notify.handler)) { - status = AE_ALREADY_EXISTS; - goto unlock_and_exit; - } - - if (handler_type & ACPI_SYSTEM_NOTIFY) { - acpi_gbl_system_notify.node = node; - acpi_gbl_system_notify.handler = handler; - acpi_gbl_system_notify.context = context; - } - - if (handler_type & ACPI_DEVICE_NOTIFY) { - acpi_gbl_device_notify.node = node; - acpi_gbl_device_notify.handler = handler; - acpi_gbl_device_notify.context = context; - } - - /* Global notify handler installed */ - } - - /* - * All Other Objects: - * Caller will only receive notifications specific to the target object. - * Note that only certain object types can receive notifications. - */ - else { - /* Notifies allowed on this object? */ - - if (!acpi_ev_is_notify_object(node)) { - status = AE_TYPE; - goto unlock_and_exit; - } - - /* Check for an existing internal object */ - - obj_desc = acpi_ns_get_attached_object(node); - if (obj_desc) { - - /* Object exists. */ - - /* For a device notify, make sure there's no handler. */ - if ((handler_type & ACPI_DEVICE_NOTIFY) && - obj_desc->common_notify.device_notify) { - status = AE_ALREADY_EXISTS; - goto unlock_and_exit; - } - - /* System notifies may have more handlers installed. */ - notify_obj = obj_desc->common_notify.system_notify; - - if ((handler_type & ACPI_SYSTEM_NOTIFY) && notify_obj) { - struct acpi_object_notify_handler *parent_obj; - - if (handler_type & ACPI_DEVICE_NOTIFY) { + for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) { + if (handler_type & (i + 1)) { + if (acpi_gbl_global_notify[i].handler) { status = AE_ALREADY_EXISTS; goto unlock_and_exit; } - parent_obj = ¬ify_obj->notify; - status = acpi_add_handler_object(parent_obj, - handler, - context); - goto unlock_and_exit; - } - } else { - /* Create a new object */ - - obj_desc = acpi_ut_create_internal_object(node->type); - if (!obj_desc) { - status = AE_NO_MEMORY; - goto unlock_and_exit; - } - - /* Attach new object to the Node */ - - status = - acpi_ns_attach_object(device, obj_desc, node->type); - - /* Remove local reference to the object */ - - acpi_ut_remove_reference(obj_desc); - if (ACPI_FAILURE(status)) { - goto unlock_and_exit; + acpi_gbl_global_notify[i].handler = handler; + acpi_gbl_global_notify[i].context = context; } } - /* Install the handler */ + goto unlock_and_exit; /* Global notify handler installed, all done */ + } - notify_obj = - acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_NOTIFY); - if (!notify_obj) { + /* + * All Other Objects: + * Caller will only receive notifications specific to the target + * object. Note that only certain object types are allowed to + * receive notifications. + */ + + /* Are Notifies allowed on this object? */ + + if (!acpi_ev_is_notify_object(node)) { + status = AE_TYPE; + goto unlock_and_exit; + } + + /* Check for an existing internal object, might not exist */ + + obj_desc = acpi_ns_get_attached_object(node); + if (!obj_desc) { + + /* Create a new object */ + + obj_desc = acpi_ut_create_internal_object(node->type); + if (!obj_desc) { status = AE_NO_MEMORY; goto unlock_and_exit; } - acpi_populate_handler_object(¬ify_obj->notify, - handler_type, - handler, context, - NULL); + /* Attach new object to the Node, remove local reference */ - if (handler_type & ACPI_SYSTEM_NOTIFY) { - obj_desc->common_notify.system_notify = notify_obj; - } - - if (handler_type & ACPI_DEVICE_NOTIFY) { - obj_desc->common_notify.device_notify = notify_obj; - } - - if (handler_type == ACPI_ALL_NOTIFY) { - - /* Extra ref if installed in both */ - - acpi_ut_add_reference(notify_obj); + status = acpi_ns_attach_object(device, obj_desc, node->type); + acpi_ut_remove_reference(obj_desc); + if (ACPI_FAILURE(status)) { + goto unlock_and_exit; } } - unlock_and_exit: + /* Ensure that the handler is not already installed in the lists */ + + for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) { + if (handler_type & (i + 1)) { + handler_obj = obj_desc->common_notify.notify_list[i]; + while (handler_obj) { + if (handler_obj->notify.handler == handler) { + status = AE_ALREADY_EXISTS; + goto unlock_and_exit; + } + + handler_obj = handler_obj->notify.next[i]; + } + } + } + + /* Create and populate a new notify handler object */ + + handler_obj = acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_NOTIFY); + if (!handler_obj) { + status = AE_NO_MEMORY; + goto unlock_and_exit; + } + + handler_obj->notify.node = node; + handler_obj->notify.handler_type = handler_type; + handler_obj->notify.handler = handler; + handler_obj->notify.context = context; + + /* Install the handler at the list head(s) */ + + for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) { + if (handler_type & (i + 1)) { + handler_obj->notify.next[i] = + obj_desc->common_notify.notify_list[i]; + + obj_desc->common_notify.notify_list[i] = handler_obj; + } + } + + /* Add an extra reference if handler was installed in both lists */ + + if (handler_type == ACPI_ALL_NOTIFY) { + acpi_ut_add_reference(handler_obj); + } + +unlock_and_exit: (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); return_ACPI_STATUS(status); } @@ -308,11 +217,11 @@ ACPI_EXPORT_SYMBOL(acpi_install_notify_handler) * * FUNCTION: acpi_remove_notify_handler * - * PARAMETERS: Device - The device for which notifies will be handled + * PARAMETERS: Device - The device for which the handler is installed * handler_type - The type of handler: - * ACPI_SYSTEM_NOTIFY: system_handler (00-7f) - * ACPI_DEVICE_NOTIFY: driver_handler (80-ff) - * ACPI_ALL_NOTIFY: both system and device + * ACPI_SYSTEM_NOTIFY: System Handler (00-7F) + * ACPI_DEVICE_NOTIFY: Device Handler (80-FF) + * ACPI_ALL_NOTIFY: Both System and Device * Handler - Address of the handler * * RETURN: Status @@ -324,165 +233,106 @@ acpi_status acpi_remove_notify_handler(acpi_handle device, u32 handler_type, acpi_notify_handler handler) { - union acpi_operand_object *notify_obj; + struct acpi_namespace_node *node = + ACPI_CAST_PTR(struct acpi_namespace_node, device); union acpi_operand_object *obj_desc; - struct acpi_namespace_node *node; + union acpi_operand_object *handler_obj; + union acpi_operand_object *previous_handler_obj; acpi_status status; + u32 i; ACPI_FUNCTION_TRACE(acpi_remove_notify_handler); /* Parameter validation */ - if ((!device) || - (!handler) || (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) { - status = AE_BAD_PARAMETER; - goto exit; + if ((!device) || (!handler) || (!handler_type) || + (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) { + return_ACPI_STATUS(AE_BAD_PARAMETER); } - - /* Make sure all deferred tasks are completed */ - acpi_os_wait_events_complete(NULL); + + acpi_os_wait_events_complete(); status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); if (ACPI_FAILURE(status)) { - goto exit; + return_ACPI_STATUS(status); } - /* Convert and validate the device handle */ + /* Root Object. Global handlers are removed here */ + + if (device == ACPI_ROOT_OBJECT) { + for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) { + if (handler_type & (i + 1)) { + if (!acpi_gbl_global_notify[i].handler || + (acpi_gbl_global_notify[i].handler != + handler)) { + status = AE_NOT_EXIST; + goto unlock_and_exit; + } + + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Removing global notify handler\n")); + + acpi_gbl_global_notify[i].handler = NULL; + acpi_gbl_global_notify[i].context = NULL; + } + } - node = acpi_ns_validate_handle(device); - if (!node) { - status = AE_BAD_PARAMETER; goto unlock_and_exit; } - /* Root Object */ + /* All other objects: Are Notifies allowed on this object? */ - if (device == ACPI_ROOT_OBJECT) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Removing notify handler for namespace root object\n")); - - if (((handler_type & ACPI_SYSTEM_NOTIFY) && - !acpi_gbl_system_notify.handler) || - ((handler_type & ACPI_DEVICE_NOTIFY) && - !acpi_gbl_device_notify.handler)) { - status = AE_NOT_EXIST; - goto unlock_and_exit; - } - - if (handler_type & ACPI_SYSTEM_NOTIFY) { - acpi_gbl_system_notify.node = NULL; - acpi_gbl_system_notify.handler = NULL; - acpi_gbl_system_notify.context = NULL; - } - - if (handler_type & ACPI_DEVICE_NOTIFY) { - acpi_gbl_device_notify.node = NULL; - acpi_gbl_device_notify.handler = NULL; - acpi_gbl_device_notify.context = NULL; - } + if (!acpi_ev_is_notify_object(node)) { + status = AE_TYPE; + goto unlock_and_exit; } - /* All Other Objects */ + /* Must have an existing internal object */ - else { - /* Notifies allowed on this object? */ + obj_desc = acpi_ns_get_attached_object(node); + if (!obj_desc) { + status = AE_NOT_EXIST; + goto unlock_and_exit; + } - if (!acpi_ev_is_notify_object(node)) { - status = AE_TYPE; - goto unlock_and_exit; - } + /* Internal object exists. Find the handler and remove it */ - /* Check for an existing internal object */ + for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) { + if (handler_type & (i + 1)) { + handler_obj = obj_desc->common_notify.notify_list[i]; + previous_handler_obj = NULL; - obj_desc = acpi_ns_get_attached_object(node); - if (!obj_desc) { - status = AE_NOT_EXIST; - goto unlock_and_exit; - } + /* Attempt to find the handler in the handler list */ - /* Object exists - make sure there's an existing handler */ + while (handler_obj && + (handler_obj->notify.handler != handler)) { + previous_handler_obj = handler_obj; + handler_obj = handler_obj->notify.next[i]; + } - if (handler_type & ACPI_SYSTEM_NOTIFY) { - struct acpi_object_notify_handler *handler_obj; - struct acpi_object_notify_handler *parent_obj; - - notify_obj = obj_desc->common_notify.system_notify; - if (!notify_obj) { + if (!handler_obj) { status = AE_NOT_EXIST; goto unlock_and_exit; } - handler_obj = ¬ify_obj->notify; - parent_obj = NULL; - while (handler_obj->handler != handler) { - if (handler_obj->next) { - parent_obj = handler_obj; - handler_obj = handler_obj->next; - } else { - break; - } + /* Remove the handler object from the list */ + + if (previous_handler_obj) { /* Handler is not at the list head */ + previous_handler_obj->notify.next[i] = + handler_obj->notify.next[i]; + } else { /* Handler is at the list head */ + + obj_desc->common_notify.notify_list[i] = + handler_obj->notify.next[i]; } - if (handler_obj->handler != handler) { - status = AE_BAD_PARAMETER; - goto unlock_and_exit; - } - - /* - * Remove the handler. There are three possible cases. - * First, we may need to remove a non-embedded object. - * Second, we may need to remove the embedded object's - * handler data, while non-embedded objects exist. - * Finally, we may need to remove the embedded object - * entirely along with its container. - */ - if (parent_obj) { - /* Non-embedded object is being removed. */ - parent_obj->next = handler_obj->next; - ACPI_FREE(handler_obj); - } else if (notify_obj->notify.next) { - /* - * The handler matches the embedded object, but - * there are more handler objects in the list. - * Replace the embedded object's data with the - * first next object's data and remove that - * object. - */ - parent_obj = ¬ify_obj->notify; - handler_obj = notify_obj->notify.next; - *parent_obj = *handler_obj; - ACPI_FREE(handler_obj); - } else { - /* No more handler objects in the list. */ - obj_desc->common_notify.system_notify = NULL; - acpi_ut_remove_reference(notify_obj); - } - } - - if (handler_type & ACPI_DEVICE_NOTIFY) { - notify_obj = obj_desc->common_notify.device_notify; - if (!notify_obj) { - status = AE_NOT_EXIST; - goto unlock_and_exit; - } - - if (notify_obj->notify.handler != handler) { - status = AE_BAD_PARAMETER; - goto unlock_and_exit; - } - - /* Remove the handler */ - obj_desc->common_notify.device_notify = NULL; - acpi_ut_remove_reference(notify_obj); + acpi_ut_remove_reference(handler_obj); } } - unlock_and_exit: +unlock_and_exit: (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); - exit: - if (ACPI_FAILURE(status)) - ACPI_EXCEPTION((AE_INFO, status, "Removing notify handler")); return_ACPI_STATUS(status); } @@ -492,7 +342,7 @@ ACPI_EXPORT_SYMBOL(acpi_remove_notify_handler) * * FUNCTION: acpi_install_exception_handler * - * PARAMETERS: Handler - Pointer to the handler function for the + * PARAMETERS: handler - Pointer to the handler function for the * event * * RETURN: Status @@ -536,8 +386,8 @@ ACPI_EXPORT_SYMBOL(acpi_install_exception_handler) * * FUNCTION: acpi_install_global_event_handler * - * PARAMETERS: Handler - Pointer to the global event handler function - * Context - Value passed to the handler on each event + * PARAMETERS: handler - Pointer to the global event handler function + * context - Value passed to the handler on each event * * RETURN: Status * @@ -586,10 +436,10 @@ ACPI_EXPORT_SYMBOL(acpi_install_global_event_handler) * * FUNCTION: acpi_install_fixed_event_handler * - * PARAMETERS: Event - Event type to enable. - * Handler - Pointer to the handler function for the + * PARAMETERS: event - Event type to enable. + * handler - Pointer to the handler function for the * event - * Context - Value passed to the handler on each GPE + * context - Value passed to the handler on each GPE * * RETURN: Status * @@ -656,8 +506,8 @@ ACPI_EXPORT_SYMBOL(acpi_install_fixed_event_handler) * * FUNCTION: acpi_remove_fixed_event_handler * - * PARAMETERS: Event - Event type to disable. - * Handler - Address of the handler + * PARAMETERS: event - Event type to disable. + * handler - Address of the handler * * RETURN: Status * @@ -713,10 +563,10 @@ ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler) * PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT * defined GPEs) * gpe_number - The GPE number within the GPE block - * Type - Whether this GPE should be treated as an + * type - Whether this GPE should be treated as an * edge- or level-triggered interrupt. - * Address - Address of the handler - * Context - Value passed to the handler on each GPE + * address - Address of the handler + * context - Value passed to the handler on each GPE * * RETURN: Status * @@ -823,7 +673,7 @@ ACPI_EXPORT_SYMBOL(acpi_install_gpe_handler) * PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT * defined GPEs) * gpe_number - The event to remove a handler - * Address - Address of the handler + * address - Address of the handler * * RETURN: Status * @@ -849,7 +699,7 @@ acpi_remove_gpe_handler(acpi_handle gpe_device, /* Make sure all deferred tasks are completed */ - acpi_os_wait_events_complete(NULL); + acpi_os_wait_events_complete(); status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); if (ACPI_FAILURE(status)) { @@ -919,8 +769,8 @@ ACPI_EXPORT_SYMBOL(acpi_remove_gpe_handler) * * FUNCTION: acpi_acquire_global_lock * - * PARAMETERS: Timeout - How long the caller is willing to wait - * Handle - Where the handle to the lock is returned + * PARAMETERS: timeout - How long the caller is willing to wait + * handle - Where the handle to the lock is returned * (if acquired) * * RETURN: Status @@ -967,7 +817,7 @@ ACPI_EXPORT_SYMBOL(acpi_acquire_global_lock) * * FUNCTION: acpi_release_global_lock * - * PARAMETERS: Handle - Returned from acpi_acquire_global_lock + * PARAMETERS: handle - Returned from acpi_acquire_global_lock * * RETURN: Status * diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c index 77cee5a5e891..35520c6eeefb 100644 --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -153,8 +153,8 @@ ACPI_EXPORT_SYMBOL(acpi_disable) * * FUNCTION: acpi_enable_event * - * PARAMETERS: Event - The fixed eventto be enabled - * Flags - Reserved + * PARAMETERS: event - The fixed eventto be enabled + * flags - Reserved * * RETURN: Status * @@ -265,7 +265,7 @@ ACPI_EXPORT_SYMBOL(acpi_disable_event) * * FUNCTION: acpi_clear_event * - * PARAMETERS: Event - The fixed event to be cleared + * PARAMETERS: event - The fixed event to be cleared * * RETURN: Status * @@ -301,7 +301,7 @@ ACPI_EXPORT_SYMBOL(acpi_clear_event) * * FUNCTION: acpi_get_event_status * - * PARAMETERS: Event - The fixed event + * PARAMETERS: event - The fixed event * event_status - Where the current status of the event will * be returned * diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c index 86f9b343ebd4..6affbdb4b88c 100644 --- a/drivers/acpi/acpica/evxfgpe.c +++ b/drivers/acpi/acpica/evxfgpe.c @@ -197,12 +197,12 @@ acpi_status acpi_setup_gpe_for_wake(acpi_handle wake_device, acpi_handle gpe_device, u32 gpe_number) { - acpi_status status = AE_BAD_PARAMETER; + acpi_status status; struct acpi_gpe_event_info *gpe_event_info; struct acpi_namespace_node *device_node; - struct acpi_gpe_notify_object *notify_object; + struct acpi_gpe_notify_info *notify; + struct acpi_gpe_notify_info *new_notify; acpi_cpu_flags flags; - u8 gpe_dispatch_mask; ACPI_FUNCTION_TRACE(acpi_setup_gpe_for_wake); @@ -216,63 +216,95 @@ acpi_setup_gpe_for_wake(acpi_handle wake_device, return_ACPI_STATUS(AE_BAD_PARAMETER); } + /* Handle root object case */ + + if (wake_device == ACPI_ROOT_OBJECT) { + device_node = acpi_gbl_root_node; + } else { + device_node = ACPI_CAST_PTR(struct acpi_namespace_node, wake_device); + } + + /* Validate WakeDevice is of type Device */ + + if (device_node->type != ACPI_TYPE_DEVICE) { + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + /* + * Allocate a new notify object up front, in case it is needed. + * Memory allocation while holding a spinlock is a big no-no + * on some hosts. + */ + new_notify = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_notify_info)); + if (!new_notify) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); if (!gpe_event_info) { + status = AE_BAD_PARAMETER; goto unlock_and_exit; } - if (wake_device == ACPI_ROOT_OBJECT) { - goto out; - } - /* * If there is no method or handler for this GPE, then the - * wake_device will be notified whenever this GPE fires (aka - * "implicit notify") Note: The GPE is assumed to be + * wake_device will be notified whenever this GPE fires. This is + * known as an "implicit notify". Note: The GPE is assumed to be * level-triggered (for windows compatibility). */ - gpe_dispatch_mask = gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK; - if (gpe_dispatch_mask != ACPI_GPE_DISPATCH_NONE - && gpe_dispatch_mask != ACPI_GPE_DISPATCH_NOTIFY) { - goto out; + if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == + ACPI_GPE_DISPATCH_NONE) { + /* + * This is the first device for implicit notify on this GPE. + * Just set the flags here, and enter the NOTIFY block below. + */ + gpe_event_info->flags = + (ACPI_GPE_DISPATCH_NOTIFY | ACPI_GPE_LEVEL_TRIGGERED); } - /* Validate wake_device is of type Device */ + /* + * If we already have an implicit notify on this GPE, add + * this device to the notify list. + */ + if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == + ACPI_GPE_DISPATCH_NOTIFY) { - device_node = ACPI_CAST_PTR(struct acpi_namespace_node, wake_device); - if (device_node->type != ACPI_TYPE_DEVICE) { - goto unlock_and_exit; - } + /* Ensure that the device is not already in the list */ - if (gpe_dispatch_mask == ACPI_GPE_DISPATCH_NONE) { - gpe_event_info->flags = (ACPI_GPE_DISPATCH_NOTIFY | - ACPI_GPE_LEVEL_TRIGGERED); - gpe_event_info->dispatch.device.node = device_node; - gpe_event_info->dispatch.device.next = NULL; - } else { - /* There are multiple devices to notify implicitly. */ - - notify_object = ACPI_ALLOCATE_ZEROED(sizeof(*notify_object)); - if (!notify_object) { - status = AE_NO_MEMORY; - goto unlock_and_exit; + notify = gpe_event_info->dispatch.notify_list; + while (notify) { + if (notify->device_node == device_node) { + status = AE_ALREADY_EXISTS; + goto unlock_and_exit; + } + notify = notify->next; } - notify_object->node = device_node; - notify_object->next = gpe_event_info->dispatch.device.next; - gpe_event_info->dispatch.device.next = notify_object; + /* Add this device to the notify list for this GPE */ + + new_notify->device_node = device_node; + new_notify->next = gpe_event_info->dispatch.notify_list; + gpe_event_info->dispatch.notify_list = new_notify; + new_notify = NULL; } - out: + /* Mark the GPE as a possible wake event */ + gpe_event_info->flags |= ACPI_GPE_CAN_WAKE; status = AE_OK; - unlock_and_exit: +unlock_and_exit: acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + + /* Delete the notify object if it was not used above */ + + if (new_notify) { + ACPI_FREE(new_notify); + } return_ACPI_STATUS(status); } ACPI_EXPORT_SYMBOL(acpi_setup_gpe_for_wake) @@ -283,7 +315,7 @@ ACPI_EXPORT_SYMBOL(acpi_setup_gpe_for_wake) * * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 * gpe_number - GPE level within the GPE block - * Action - Enable or Disable + * action - Enable or Disable * * RETURN: Status * @@ -508,7 +540,7 @@ ACPI_EXPORT_SYMBOL(acpi_enable_all_runtime_gpes) * FUNCTION: acpi_install_gpe_block * * PARAMETERS: gpe_device - Handle to the parent GPE Block Device - * gpe_block_address - Address and space_iD + * gpe_block_address - Address and space_ID * register_count - Number of GPE register pairs in the block * interrupt_number - H/W interrupt for the block * @@ -653,7 +685,7 @@ ACPI_EXPORT_SYMBOL(acpi_remove_gpe_block) * * FUNCTION: acpi_get_gpe_device * - * PARAMETERS: Index - System GPE index (0-current_gpe_count) + * PARAMETERS: index - System GPE index (0-current_gpe_count) * gpe_device - Where the parent GPE Device is returned * * RETURN: Status diff --git a/drivers/acpi/acpica/evxfregn.c b/drivers/acpi/acpica/evxfregn.c index 6019208cd4b6..96b412d03950 100644 --- a/drivers/acpi/acpica/evxfregn.c +++ b/drivers/acpi/acpica/evxfregn.c @@ -55,11 +55,11 @@ ACPI_MODULE_NAME("evxfregn") * * FUNCTION: acpi_install_address_space_handler * - * PARAMETERS: Device - Handle for the device + * PARAMETERS: device - Handle for the device * space_id - The address space ID - * Handler - Address of the handler - * Setup - Address of the setup function - * Context - Value passed to the handler on each access + * handler - Address of the handler + * setup - Address of the setup function + * context - Value passed to the handler on each access * * RETURN: Status * @@ -112,16 +112,16 @@ acpi_install_address_space_handler(acpi_handle device, } /* - * For the default space_iDs, (the IDs for which there are default region handlers + * For the default space_IDs, (the IDs for which there are default region handlers * installed) Only execute the _REG methods if the global initialization _REG * methods have already been run (via acpi_initialize_objects). In other words, - * we will defer the execution of the _REG methods for these space_iDs until + * we will defer the execution of the _REG methods for these space_IDs until * execution of acpi_initialize_objects. This is done because we need the handlers * for the default spaces (mem/io/pci/table) to be installed before we can run * any control methods (or _REG methods). There is known BIOS code that depends * on this. * - * For all other space_iDs, we can safely execute the _REG methods immediately. + * For all other space_IDs, we can safely execute the _REG methods immediately. * This means that for IDs like embedded_controller, this function should be called * only after acpi_enable_subsystem has been called. */ @@ -157,9 +157,9 @@ ACPI_EXPORT_SYMBOL(acpi_install_address_space_handler) * * FUNCTION: acpi_remove_address_space_handler * - * PARAMETERS: Device - Handle for the device + * PARAMETERS: device - Handle for the device * space_id - The address space ID - * Handler - Address of the handler + * handler - Address of the handler * * RETURN: Status * diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c index c86d44e41bc8..16219bde48da 100644 --- a/drivers/acpi/acpica/exconfig.c +++ b/drivers/acpi/acpica/exconfig.c @@ -66,7 +66,7 @@ acpi_ex_region_read(union acpi_operand_object *obj_desc, * * FUNCTION: acpi_ex_add_table * - * PARAMETERS: Table - Pointer to raw table + * PARAMETERS: table - Pointer to raw table * parent_node - Where to load the table (scope) * ddb_handle - Where to return the table handle. * @@ -276,8 +276,8 @@ acpi_ex_load_table_op(struct acpi_walk_state *walk_state, * FUNCTION: acpi_ex_region_read * * PARAMETERS: obj_desc - Region descriptor - * Length - Number of bytes to read - * Buffer - Pointer to where to put the data + * length - Number of bytes to read + * buffer - Pointer to where to put the data * * RETURN: Status * @@ -318,7 +318,7 @@ acpi_ex_region_read(union acpi_operand_object *obj_desc, u32 length, u8 *buffer) * * PARAMETERS: obj_desc - Region or Buffer/Field where the table will be * obtained - * Target - Where a handle to the table will be stored + * target - Where a handle to the table will be stored * walk_state - Current state * * RETURN: Status diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c index e385436bd424..bfb062e4c4b4 100644 --- a/drivers/acpi/acpica/exconvrt.c +++ b/drivers/acpi/acpica/exconvrt.c @@ -60,7 +60,7 @@ acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 max_length); * PARAMETERS: obj_desc - Object to be converted. Must be an * Integer, Buffer, or String * result_desc - Where the new Integer object is returned - * Flags - Used for string conversion + * flags - Used for string conversion * * RETURN: Status * @@ -272,9 +272,9 @@ acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc, * * FUNCTION: acpi_ex_convert_to_ascii * - * PARAMETERS: Integer - Value to be converted - * Base - ACPI_STRING_DECIMAL or ACPI_STRING_HEX - * String - Where the string is returned + * PARAMETERS: integer - Value to be converted + * base - ACPI_STRING_DECIMAL or ACPI_STRING_HEX + * string - Where the string is returned * data_width - Size of data item to be converted, in bytes * * RETURN: Actual string length @@ -385,7 +385,7 @@ acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 data_width) * PARAMETERS: obj_desc - Object to be converted. Must be an * Integer, Buffer, or String * result_desc - Where the string object is returned - * Type - String flags (base and conversion type) + * type - String flags (base and conversion type) * * RETURN: Status * diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c index 3f5bc998c1cb..691d4763102c 100644 --- a/drivers/acpi/acpica/excreate.c +++ b/drivers/acpi/acpica/excreate.c @@ -369,7 +369,7 @@ acpi_ex_create_region(u8 * aml_start, * * DESCRIPTION: Create a new processor object and populate the fields * - * Processor (Name[0], cpu_iD[1], pblock_addr[2], pblock_length[3]) + * Processor (Name[0], cpu_ID[1], pblock_addr[2], pblock_length[3]) * ******************************************************************************/ diff --git a/drivers/acpi/acpica/exdebug.c b/drivers/acpi/acpica/exdebug.c index e211e9c19215..bc5b9a6a1316 100644 --- a/drivers/acpi/acpica/exdebug.c +++ b/drivers/acpi/acpica/exdebug.c @@ -54,8 +54,8 @@ ACPI_MODULE_NAME("exdebug") * FUNCTION: acpi_ex_do_debug_object * * PARAMETERS: source_desc - Object to be output to "Debug Object" - * Level - Indentation level (used for packages) - * Index - Current package element, zero if not pkg + * level - Indentation level (used for packages) + * index - Current package element, zero if not pkg * * RETURN: None * diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c index 2a6ac0a3bc1e..213c081776fc 100644 --- a/drivers/acpi/acpica/exdump.c +++ b/drivers/acpi/acpica/exdump.c @@ -109,9 +109,9 @@ static struct acpi_exdump_info acpi_ex_dump_package[5] = { static struct acpi_exdump_info acpi_ex_dump_device[4] = { {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_device), NULL}, {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.handler), "Handler"}, - {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.system_notify), + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.notify_list[0]), "System Notify"}, - {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.device_notify), + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.notify_list[1]), "Device Notify"} }; @@ -158,9 +158,9 @@ static struct acpi_exdump_info acpi_ex_dump_power[5] = { "System Level"}, {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(power_resource.resource_order), "Resource Order"}, - {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.system_notify), + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.notify_list[0]), "System Notify"}, - {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.device_notify), + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.notify_list[1]), "Device Notify"} }; @@ -169,18 +169,18 @@ static struct acpi_exdump_info acpi_ex_dump_processor[7] = { {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(processor.proc_id), "Processor ID"}, {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(processor.length), "Length"}, {ACPI_EXD_ADDRESS, ACPI_EXD_OFFSET(processor.address), "Address"}, - {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.system_notify), + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.notify_list[0]), "System Notify"}, - {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.device_notify), + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.notify_list[1]), "Device Notify"}, {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.handler), "Handler"} }; static struct acpi_exdump_info acpi_ex_dump_thermal[4] = { {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_thermal), NULL}, - {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.system_notify), + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.notify_list[0]), "System Notify"}, - {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.device_notify), + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.notify_list[1]), "Device Notify"}, {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.handler), "Handler"} }; @@ -241,10 +241,15 @@ static struct acpi_exdump_info acpi_ex_dump_address_handler[6] = { {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(address_space.context), "Context"} }; -static struct acpi_exdump_info acpi_ex_dump_notify[3] = { +static struct acpi_exdump_info acpi_ex_dump_notify[7] = { {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_notify), NULL}, {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.node), "Node"}, - {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.context), "Context"} + {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(notify.handler_type), "Handler Type"}, + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.handler), "Handler"}, + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.context), "Context"}, + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.next[0]), + "Next System Notify"}, + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.next[1]), "Next Device Notify"} }; /* Miscellaneous tables */ @@ -318,7 +323,7 @@ static struct acpi_exdump_info *acpi_ex_dump_info[] = { * FUNCTION: acpi_ex_dump_object * * PARAMETERS: obj_desc - Descriptor to dump - * Info - Info table corresponding to this object + * info - Info table corresponding to this object * type * * RETURN: None @@ -444,7 +449,7 @@ acpi_ex_dump_object(union acpi_operand_object *obj_desc, * FUNCTION: acpi_ex_dump_operand * * PARAMETERS: *obj_desc - Pointer to entry to be dumped - * Depth - Current nesting depth + * depth - Current nesting depth * * RETURN: None * @@ -726,7 +731,7 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth) * * FUNCTION: acpi_ex_dump_operands * - * PARAMETERS: Operands - A list of Operand objects + * PARAMETERS: operands - A list of Operand objects * opcode_name - AML opcode name * num_operands - Operand count for this opcode * @@ -769,8 +774,8 @@ acpi_ex_dump_operands(union acpi_operand_object **operands, * * FUNCTION: acpi_ex_out* functions * - * PARAMETERS: Title - Descriptive text - * Value - Value to be displayed + * PARAMETERS: title - Descriptive text + * value - Value to be displayed * * DESCRIPTION: Object dump output formatting functions. These functions * reduce the number of format strings required and keeps them @@ -792,8 +797,8 @@ static void acpi_ex_out_pointer(char *title, void *value) * * FUNCTION: acpi_ex_dump_namespace_node * - * PARAMETERS: Node - Descriptor to dump - * Flags - Force display if TRUE + * PARAMETERS: node - Descriptor to dump + * flags - Force display if TRUE * * DESCRIPTION: Dumps the members of the given.Node * @@ -825,7 +830,7 @@ void acpi_ex_dump_namespace_node(struct acpi_namespace_node *node, u32 flags) * * FUNCTION: acpi_ex_dump_reference_obj * - * PARAMETERS: Object - Descriptor to dump + * PARAMETERS: object - Descriptor to dump * * DESCRIPTION: Dumps a reference object * @@ -882,8 +887,8 @@ static void acpi_ex_dump_reference_obj(union acpi_operand_object *obj_desc) * FUNCTION: acpi_ex_dump_package_obj * * PARAMETERS: obj_desc - Descriptor to dump - * Level - Indentation Level - * Index - Package index for this object + * level - Indentation Level + * index - Package index for this object * * DESCRIPTION: Dumps the elements of the package * @@ -926,9 +931,7 @@ acpi_ex_dump_package_obj(union acpi_operand_object *obj_desc, case ACPI_TYPE_STRING: acpi_os_printf("[String] Value: "); - for (i = 0; i < obj_desc->string.length; i++) { - acpi_os_printf("%c", obj_desc->string.pointer[i]); - } + acpi_ut_print_string(obj_desc->string.pointer, ACPI_UINT8_MAX); acpi_os_printf("\n"); break; @@ -977,7 +980,7 @@ acpi_ex_dump_package_obj(union acpi_operand_object *obj_desc, * FUNCTION: acpi_ex_dump_object_descriptor * * PARAMETERS: obj_desc - Descriptor to dump - * Flags - Force display if TRUE + * flags - Force display if TRUE * * DESCRIPTION: Dumps the members of the object descriptor given. * diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c index 149de45fdadd..a7784152ed30 100644 --- a/drivers/acpi/acpica/exfldio.c +++ b/drivers/acpi/acpica/exfldio.c @@ -222,9 +222,9 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc, * PARAMETERS: obj_desc - Field to be read * field_datum_byte_offset - Byte offset of this datum within the * parent field - * Value - Where to store value (must at least + * value - Where to store value (must at least * 64 bits) - * Function - Read or Write flag plus other region- + * function - Read or Write flag plus other region- * dependent flags * * RETURN: Status @@ -315,7 +315,7 @@ acpi_ex_access_region(union acpi_operand_object *obj_desc, * FUNCTION: acpi_ex_register_overflow * * PARAMETERS: obj_desc - Register(Field) to be written - * Value - Value to be stored + * value - Value to be stored * * RETURN: TRUE if value overflows the field, FALSE otherwise * @@ -365,7 +365,7 @@ acpi_ex_register_overflow(union acpi_operand_object *obj_desc, u64 value) * PARAMETERS: obj_desc - Field to be read * field_datum_byte_offset - Byte offset of this datum within the * parent field - * Value - Where to store value (must be 64 bits) + * value - Where to store value (must be 64 bits) * read_write - Read or Write flag * * RETURN: Status @@ -574,7 +574,7 @@ acpi_ex_field_datum_io(union acpi_operand_object *obj_desc, * FUNCTION: acpi_ex_write_with_update_rule * * PARAMETERS: obj_desc - Field to be written - * Mask - bitmask within field datum + * mask - bitmask within field datum * field_value - Value to write * field_datum_byte_offset - Offset of datum within field * @@ -678,7 +678,7 @@ acpi_ex_write_with_update_rule(union acpi_operand_object *obj_desc, * FUNCTION: acpi_ex_extract_from_field * * PARAMETERS: obj_desc - Field to be read - * Buffer - Where to store the field data + * buffer - Where to store the field data * buffer_length - Length of Buffer * * RETURN: Status @@ -823,7 +823,7 @@ acpi_ex_extract_from_field(union acpi_operand_object *obj_desc, * FUNCTION: acpi_ex_insert_into_field * * PARAMETERS: obj_desc - Field to be written - * Buffer - Data to be written + * buffer - Data to be written * buffer_length - Length of Buffer * * RETURN: Status diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c index 0a0893310348..271c0c57ea10 100644 --- a/drivers/acpi/acpica/exmisc.c +++ b/drivers/acpi/acpica/exmisc.c @@ -144,8 +144,8 @@ acpi_ex_get_object_reference(union acpi_operand_object *obj_desc, * * FUNCTION: acpi_ex_concat_template * - * PARAMETERS: Operand0 - First source object - * Operand1 - Second source object + * PARAMETERS: operand0 - First source object + * operand1 - Second source object * actual_return_desc - Where to place the return object * walk_state - Current walk state * @@ -229,8 +229,8 @@ acpi_ex_concat_template(union acpi_operand_object *operand0, * * FUNCTION: acpi_ex_do_concatenate * - * PARAMETERS: Operand0 - First source object - * Operand1 - Second source object + * PARAMETERS: operand0 - First source object + * operand1 - Second source object * actual_return_desc - Where to place the return object * walk_state - Current walk state * @@ -397,9 +397,9 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0, * * FUNCTION: acpi_ex_do_math_op * - * PARAMETERS: Opcode - AML opcode - * Integer0 - Integer operand #0 - * Integer1 - Integer operand #1 + * PARAMETERS: opcode - AML opcode + * integer0 - Integer operand #0 + * integer1 - Integer operand #1 * * RETURN: Integer result of the operation * @@ -479,9 +479,9 @@ u64 acpi_ex_do_math_op(u16 opcode, u64 integer0, u64 integer1) * * FUNCTION: acpi_ex_do_logical_numeric_op * - * PARAMETERS: Opcode - AML opcode - * Integer0 - Integer operand #0 - * Integer1 - Integer operand #1 + * PARAMETERS: opcode - AML opcode + * integer0 - Integer operand #0 + * integer1 - Integer operand #1 * logical_result - TRUE/FALSE result of the operation * * RETURN: Status @@ -534,9 +534,9 @@ acpi_ex_do_logical_numeric_op(u16 opcode, * * FUNCTION: acpi_ex_do_logical_op * - * PARAMETERS: Opcode - AML opcode - * Operand0 - operand #0 - * Operand1 - operand #1 + * PARAMETERS: opcode - AML opcode + * operand0 - operand #0 + * operand1 - operand #1 * logical_result - TRUE/FALSE result of the operation * * RETURN: Status diff --git a/drivers/acpi/acpica/exmutex.c b/drivers/acpi/acpica/exmutex.c index 60933e9dc3c0..bcceda5be9e3 100644 --- a/drivers/acpi/acpica/exmutex.c +++ b/drivers/acpi/acpica/exmutex.c @@ -102,7 +102,7 @@ void acpi_ex_unlink_mutex(union acpi_operand_object *obj_desc) * FUNCTION: acpi_ex_link_mutex * * PARAMETERS: obj_desc - The mutex to be linked - * Thread - Current executing thread object + * thread - Current executing thread object * * RETURN: None * @@ -138,7 +138,7 @@ acpi_ex_link_mutex(union acpi_operand_object *obj_desc, * * FUNCTION: acpi_ex_acquire_mutex_object * - * PARAMETERS: Timeout - Timeout in milliseconds + * PARAMETERS: timeout - Timeout in milliseconds * obj_desc - Mutex object * thread_id - Current thread state * @@ -443,7 +443,7 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc, * * FUNCTION: acpi_ex_release_all_mutexes * - * PARAMETERS: Thread - Current executing thread object + * PARAMETERS: thread - Current executing thread object * * RETURN: Status * diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c index 30157f5a12d7..81eca60d2748 100644 --- a/drivers/acpi/acpica/exprep.c +++ b/drivers/acpi/acpica/exprep.c @@ -391,12 +391,12 @@ acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc, * * FUNCTION: acpi_ex_prep_field_value * - * PARAMETERS: Info - Contains all field creation info + * PARAMETERS: info - Contains all field creation info * * RETURN: Status * - * DESCRIPTION: Construct a union acpi_operand_object of type def_field and - * connect it to the parent Node. + * DESCRIPTION: Construct an object of type union acpi_operand_object with a + * subtype of def_field and connect it to the parent Node. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c index 12d51df6d3bf..1f1ce0c3d2f8 100644 --- a/drivers/acpi/acpica/exregion.c +++ b/drivers/acpi/acpica/exregion.c @@ -53,10 +53,10 @@ ACPI_MODULE_NAME("exregion") * * FUNCTION: acpi_ex_system_memory_space_handler * - * PARAMETERS: Function - Read or Write operation - * Address - Where in the space to read or write + * PARAMETERS: function - Read or Write operation + * address - Where in the space to read or write * bit_width - Field width in bits (8, 16, or 32) - * Value - Pointer to in or out value + * value - Pointer to in or out value * handler_context - Pointer to Handler's context * region_context - Pointer to context specific to the * accessed region @@ -270,10 +270,10 @@ acpi_ex_system_memory_space_handler(u32 function, * * FUNCTION: acpi_ex_system_io_space_handler * - * PARAMETERS: Function - Read or Write operation - * Address - Where in the space to read or write + * PARAMETERS: function - Read or Write operation + * address - Where in the space to read or write * bit_width - Field width in bits (8, 16, or 32) - * Value - Pointer to in or out value + * value - Pointer to in or out value * handler_context - Pointer to Handler's context * region_context - Pointer to context specific to the * accessed region @@ -329,10 +329,10 @@ acpi_ex_system_io_space_handler(u32 function, * * FUNCTION: acpi_ex_pci_config_space_handler * - * PARAMETERS: Function - Read or Write operation - * Address - Where in the space to read or write + * PARAMETERS: function - Read or Write operation + * address - Where in the space to read or write * bit_width - Field width in bits (8, 16, or 32) - * Value - Pointer to in or out value + * value - Pointer to in or out value * handler_context - Pointer to Handler's context * region_context - Pointer to context specific to the * accessed region @@ -365,7 +365,7 @@ acpi_ex_pci_config_space_handler(u32 function, * pci_function is the PCI device function number * pci_register is the Config space register range 0-255 bytes * - * Value - input value for write, output address for read + * value - input value for write, output address for read * */ pci_id = (struct acpi_pci_id *)region_context; @@ -402,10 +402,10 @@ acpi_ex_pci_config_space_handler(u32 function, * * FUNCTION: acpi_ex_cmos_space_handler * - * PARAMETERS: Function - Read or Write operation - * Address - Where in the space to read or write + * PARAMETERS: function - Read or Write operation + * address - Where in the space to read or write * bit_width - Field width in bits (8, 16, or 32) - * Value - Pointer to in or out value + * value - Pointer to in or out value * handler_context - Pointer to Handler's context * region_context - Pointer to context specific to the * accessed region @@ -434,10 +434,10 @@ acpi_ex_cmos_space_handler(u32 function, * * FUNCTION: acpi_ex_pci_bar_space_handler * - * PARAMETERS: Function - Read or Write operation - * Address - Where in the space to read or write + * PARAMETERS: function - Read or Write operation + * address - Where in the space to read or write * bit_width - Field width in bits (8, 16, or 32) - * Value - Pointer to in or out value + * value - Pointer to in or out value * handler_context - Pointer to Handler's context * region_context - Pointer to context specific to the * accessed region @@ -466,10 +466,10 @@ acpi_ex_pci_bar_space_handler(u32 function, * * FUNCTION: acpi_ex_data_table_space_handler * - * PARAMETERS: Function - Read or Write operation - * Address - Where in the space to read or write + * PARAMETERS: function - Read or Write operation + * address - Where in the space to read or write * bit_width - Field width in bits (8, 16, or 32) - * Value - Pointer to in or out value + * value - Pointer to in or out value * handler_context - Pointer to Handler's context * region_context - Pointer to context specific to the * accessed region diff --git a/drivers/acpi/acpica/exresolv.c b/drivers/acpi/acpica/exresolv.c index 6e335dc34528..bbf40ac27585 100644 --- a/drivers/acpi/acpica/exresolv.c +++ b/drivers/acpi/acpica/exresolv.c @@ -147,7 +147,7 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr, stack_desc = *stack_ptr; - /* This is a union acpi_operand_object */ + /* This is an object of type union acpi_operand_object */ switch (stack_desc->common.type) { case ACPI_TYPE_LOCAL_REFERENCE: @@ -321,7 +321,7 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr, * FUNCTION: acpi_ex_resolve_multiple * * PARAMETERS: walk_state - Current state (contains AML opcode) - * Operand - Starting point for resolution + * operand - Starting point for resolution * return_type - Where the object type is returned * return_desc - Where the resolved object is returned * diff --git a/drivers/acpi/acpica/exresop.c b/drivers/acpi/acpica/exresop.c index a67b1d925ddd..f232fbabdea8 100644 --- a/drivers/acpi/acpica/exresop.c +++ b/drivers/acpi/acpica/exresop.c @@ -113,7 +113,7 @@ acpi_ex_check_object_type(acpi_object_type type_needed, * * FUNCTION: acpi_ex_resolve_operands * - * PARAMETERS: Opcode - Opcode being interpreted + * PARAMETERS: opcode - Opcode being interpreted * stack_ptr - Pointer to the operand stack to be * resolved * walk_state - Current state @@ -307,7 +307,7 @@ acpi_ex_resolve_operands(u16 opcode, case ARGI_DEVICE_REF: case ARGI_TARGETREF: /* Allows implicit conversion rules before store */ case ARGI_FIXED_TARGET: /* No implicit conversion before store to target */ - case ARGI_SIMPLE_TARGET: /* Name, Local, or Arg - no implicit conversion */ + case ARGI_SIMPLE_TARGET: /* Name, Local, or arg - no implicit conversion */ /* * Need an operand of type ACPI_TYPE_LOCAL_REFERENCE @@ -410,7 +410,7 @@ acpi_ex_resolve_operands(u16 opcode, /* * Need an operand of type ACPI_TYPE_INTEGER, * But we can implicitly convert from a STRING or BUFFER - * Aka - "Implicit Source Operand Conversion" + * aka - "Implicit Source Operand Conversion" */ status = acpi_ex_convert_to_integer(obj_desc, stack_ptr, 16); @@ -437,7 +437,7 @@ acpi_ex_resolve_operands(u16 opcode, /* * Need an operand of type ACPI_TYPE_BUFFER, * But we can implicitly convert from a STRING or INTEGER - * Aka - "Implicit Source Operand Conversion" + * aka - "Implicit Source Operand Conversion" */ status = acpi_ex_convert_to_buffer(obj_desc, stack_ptr); if (ACPI_FAILURE(status)) { @@ -463,7 +463,7 @@ acpi_ex_resolve_operands(u16 opcode, /* * Need an operand of type ACPI_TYPE_STRING, * But we can implicitly convert from a BUFFER or INTEGER - * Aka - "Implicit Source Operand Conversion" + * aka - "Implicit Source Operand Conversion" */ status = acpi_ex_convert_to_string(obj_desc, stack_ptr, ACPI_IMPLICIT_CONVERT_HEX); diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c index c6cf843cc4c9..5fffe7ab5ece 100644 --- a/drivers/acpi/acpica/exstore.c +++ b/drivers/acpi/acpica/exstore.c @@ -62,8 +62,8 @@ acpi_ex_store_object_to_index(union acpi_operand_object *val_desc, * FUNCTION: acpi_ex_store * * PARAMETERS: *source_desc - Value to be stored - * *dest_desc - Where to store it. Must be an NS node - * or a union acpi_operand_object of type + * *dest_desc - Where to store it. Must be an NS node + * or union acpi_operand_object of type * Reference; * walk_state - Current walk state * @@ -361,7 +361,7 @@ acpi_ex_store_object_to_index(union acpi_operand_object *source_desc, * FUNCTION: acpi_ex_store_object_to_node * * PARAMETERS: source_desc - Value to be stored - * Node - Named object to receive the value + * node - Named object to receive the value * walk_state - Current walk state * implicit_conversion - Perform implicit conversion (yes/no) * diff --git a/drivers/acpi/acpica/exstorob.c b/drivers/acpi/acpica/exstorob.c index 65a45d8335c8..53c248473547 100644 --- a/drivers/acpi/acpica/exstorob.c +++ b/drivers/acpi/acpica/exstorob.c @@ -110,7 +110,7 @@ acpi_ex_store_buffer_to_buffer(union acpi_operand_object *source_desc, * NOTE: ACPI versions up to 3.0 specified that the buffer must be * truncated if the string is smaller than the buffer. However, "other" * implementations of ACPI never did this and thus became the defacto - * standard. ACPI 3.0_a changes this behavior such that the buffer + * standard. ACPI 3.0A changes this behavior such that the buffer * is no longer truncated. */ diff --git a/drivers/acpi/acpica/exsystem.c b/drivers/acpi/acpica/exsystem.c index 191a12945226..b760641e2fc6 100644 --- a/drivers/acpi/acpica/exsystem.c +++ b/drivers/acpi/acpica/exsystem.c @@ -53,8 +53,8 @@ ACPI_MODULE_NAME("exsystem") * * FUNCTION: acpi_ex_system_wait_semaphore * - * PARAMETERS: Semaphore - Semaphore to wait on - * Timeout - Max time to wait + * PARAMETERS: semaphore - Semaphore to wait on + * timeout - Max time to wait * * RETURN: Status * @@ -98,8 +98,8 @@ acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout) * * FUNCTION: acpi_ex_system_wait_mutex * - * PARAMETERS: Mutex - Mutex to wait on - * Timeout - Max time to wait + * PARAMETERS: mutex - Mutex to wait on + * timeout - Max time to wait * * RETURN: Status * diff --git a/drivers/acpi/acpica/exutils.c b/drivers/acpi/acpica/exutils.c index eb6798ba8b59..d1ab7917eed7 100644 --- a/drivers/acpi/acpica/exutils.c +++ b/drivers/acpi/acpica/exutils.c @@ -109,7 +109,7 @@ void acpi_ex_enter_interpreter(void) * * DESCRIPTION: Reacquire the interpreter execution region from within the * interpreter code. Failure to enter the interpreter region is a - * fatal system error. Used in conjunction with + * fatal system error. Used in conjunction with * relinquish_interpreter * ******************************************************************************/ @@ -317,8 +317,8 @@ void acpi_ex_release_global_lock(u32 field_flags) * * FUNCTION: acpi_ex_digits_needed * - * PARAMETERS: Value - Value to be represented - * Base - Base of representation + * PARAMETERS: value - Value to be represented + * base - Base of representation * * RETURN: The number of digits. * @@ -408,7 +408,7 @@ void acpi_ex_eisa_id_to_string(char *out_string, u64 compressed_id) * PARAMETERS: out_string - Where to put the converted string. At least * 21 bytes are needed to hold the largest * possible 64-bit integer. - * Value - Value to be converted + * value - Value to be converted * * RETURN: None, string * @@ -443,7 +443,7 @@ void acpi_ex_integer_to_string(char *out_string, u64 value) * * RETURN: TRUE if valid/supported ID. * - * DESCRIPTION: Validate an operation region space_iD. + * DESCRIPTION: Validate an operation region space_ID. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c index d0b9ed5df97e..a1e71d0ef57b 100644 --- a/drivers/acpi/acpica/hwacpi.c +++ b/drivers/acpi/acpica/hwacpi.c @@ -53,7 +53,7 @@ ACPI_MODULE_NAME("hwacpi") * * FUNCTION: acpi_hw_set_mode * - * PARAMETERS: Mode - SYS_MODE_ACPI or SYS_MODE_LEGACY + * PARAMETERS: mode - SYS_MODE_ACPI or SYS_MODE_LEGACY * * RETURN: Status * diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c index 29e859293edd..48518dac5342 100644 --- a/drivers/acpi/acpica/hwesleep.c +++ b/drivers/acpi/acpica/hwesleep.c @@ -90,7 +90,7 @@ void acpi_hw_execute_sleep_method(char *method_pathname, u32 integer_argument) * FUNCTION: acpi_hw_extended_sleep * * PARAMETERS: sleep_state - Which sleep state to enter - * Flags - ACPI_EXECUTE_GTS to run optional method + * flags - ACPI_EXECUTE_GTS to run optional method * * RETURN: Status * @@ -117,7 +117,8 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags) /* Clear wake status (WAK_STS) */ - status = acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); + status = + acpi_write((u64)ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } @@ -147,7 +148,7 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags) ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) & ACPI_X_SLEEP_TYPE_MASK); - status = acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE), + status = acpi_write((u64)(sleep_type_value | ACPI_X_SLEEP_ENABLE), &acpi_gbl_FADT.sleep_control); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); @@ -171,7 +172,7 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags) * FUNCTION: acpi_hw_extended_wake_prep * * PARAMETERS: sleep_state - Which sleep state we just exited - * Flags - ACPI_EXECUTE_BFS to run optional method + * flags - ACPI_EXECUTE_BFS to run optional method * * RETURN: Status * @@ -195,7 +196,7 @@ acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags) ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) & ACPI_X_SLEEP_TYPE_MASK); - (void)acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE), + (void)acpi_write((u64)(sleep_type_value | ACPI_X_SLEEP_ENABLE), &acpi_gbl_FADT.sleep_control); } @@ -212,7 +213,7 @@ acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags) * FUNCTION: acpi_hw_extended_wake * * PARAMETERS: sleep_state - Which sleep state we just exited - * Flags - Reserved, set to zero + * flags - Reserved, set to zero * * RETURN: Status * @@ -239,7 +240,7 @@ acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags) * and use it to determine whether the system is rebooting or * resuming. Clear WAK_STS for compatibility. */ - (void)acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); + (void)acpi_write((u64)ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); acpi_gbl_system_awake_and_running = TRUE; acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING); diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index 6b6c83b87b52..4af6d20ef077 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -69,9 +69,9 @@ acpi_hw_write_multiple(u32 value, * * FUNCTION: acpi_hw_validate_register * - * PARAMETERS: Reg - GAS register structure + * PARAMETERS: reg - GAS register structure * max_bit_width - Max bit_width supported (32 or 64) - * Address - Pointer to where the gas->address + * address - Pointer to where the gas->address * is returned * * RETURN: Status @@ -102,7 +102,7 @@ acpi_hw_validate_register(struct acpi_generic_address *reg, return (AE_BAD_ADDRESS); } - /* Validate the space_iD */ + /* Validate the space_ID */ if ((reg->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { @@ -137,8 +137,8 @@ acpi_hw_validate_register(struct acpi_generic_address *reg, * * FUNCTION: acpi_hw_read * - * PARAMETERS: Value - Where the value is returned - * Reg - GAS register structure + * PARAMETERS: value - Where the value is returned + * reg - GAS register structure * * RETURN: Status * @@ -148,7 +148,7 @@ acpi_hw_validate_register(struct acpi_generic_address *reg, * * LIMITATIONS: * bit_width must be exactly 8, 16, or 32. - * space_iD must be system_memory or system_iO. + * space_ID must be system_memory or system_IO. * bit_offset and access_width are currently ignored, as there has * not been a need to implement these. * @@ -200,8 +200,8 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) * * FUNCTION: acpi_hw_write * - * PARAMETERS: Value - Value to be written - * Reg - GAS register structure + * PARAMETERS: value - Value to be written + * reg - GAS register structure * * RETURN: Status * @@ -439,7 +439,7 @@ acpi_hw_register_read(u32 register_id, u32 * return_value) * FUNCTION: acpi_hw_register_write * * PARAMETERS: register_id - ACPI Register ID - * Value - The value to write + * value - The value to write * * RETURN: Status * @@ -571,7 +571,7 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) * * FUNCTION: acpi_hw_read_multiple * - * PARAMETERS: Value - Where the register value is returned + * PARAMETERS: value - Where the register value is returned * register_a - First ACPI register (required) * register_b - Second ACPI register (optional) * @@ -624,7 +624,7 @@ acpi_hw_read_multiple(u32 *value, * * FUNCTION: acpi_hw_write_multiple * - * PARAMETERS: Value - The value to write + * PARAMETERS: value - The value to write * register_a - First ACPI register (required) * register_b - Second ACPI register (optional) * diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index 0ed85cac3231..9960fe9ef533 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -56,7 +56,7 @@ ACPI_MODULE_NAME("hwsleep") * FUNCTION: acpi_hw_legacy_sleep * * PARAMETERS: sleep_state - Which sleep state to enter - * Flags - ACPI_EXECUTE_GTS to run optional method + * flags - ACPI_EXECUTE_GTS to run optional method * * RETURN: Status * @@ -95,18 +95,6 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags) return_ACPI_STATUS(status); } - if (sleep_state != ACPI_STATE_S5) { - /* - * Disable BM arbitration. This feature is contained within an - * optional register (PM2 Control), so ignore a BAD_ADDRESS - * exception. - */ - status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1); - if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) { - return_ACPI_STATUS(status); - } - } - /* * 1) Disable/Clear all GPEs * 2) Enable all wakeup GPEs @@ -226,7 +214,7 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags) * FUNCTION: acpi_hw_legacy_wake_prep * * PARAMETERS: sleep_state - Which sleep state we just exited - * Flags - ACPI_EXECUTE_BFS to run optional method + * flags - ACPI_EXECUTE_BFS to run optional method * * RETURN: Status * @@ -300,7 +288,7 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags) * FUNCTION: acpi_hw_legacy_wake * * PARAMETERS: sleep_state - Which sleep state we just exited - * Flags - Reserved, set to zero + * flags - Reserved, set to zero * * RETURN: Status * @@ -364,16 +352,6 @@ acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags) [ACPI_EVENT_POWER_BUTTON]. status_register_id, ACPI_CLEAR_STATUS); - /* - * Enable BM arbitration. This feature is contained within an - * optional register (PM2 Control), so ignore a BAD_ADDRESS - * exception. - */ - status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0); - if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) { - return_ACPI_STATUS(status); - } - acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c index f1b2c3b94cac..b6411f16832f 100644 --- a/drivers/acpi/acpica/hwtimer.c +++ b/drivers/acpi/acpica/hwtimer.c @@ -54,7 +54,7 @@ ACPI_MODULE_NAME("hwtimer") * * FUNCTION: acpi_get_timer_resolution * - * PARAMETERS: Resolution - Where the resolution is returned + * PARAMETERS: resolution - Where the resolution is returned * * RETURN: Status and timer resolution * @@ -84,7 +84,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_timer_resolution) * * FUNCTION: acpi_get_timer * - * PARAMETERS: Ticks - Where the timer value is returned + * PARAMETERS: ticks - Where the timer value is returned * * RETURN: Status and current timer value (ticks) * diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c index 6e5c43a60bb7..c99d546b217f 100644 --- a/drivers/acpi/acpica/hwvalid.c +++ b/drivers/acpi/acpica/hwvalid.c @@ -58,7 +58,7 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width); * * The table is used to implement the Microsoft port access rules that * first appeared in Windows XP. Some ports are always illegal, and some - * ports are only illegal if the BIOS calls _OSI with a win_xP string or + * ports are only illegal if the BIOS calls _OSI with a win_XP string or * later (meaning that the BIOS itelf is post-XP.) * * This provides ACPICA with the desired port protections and @@ -66,7 +66,7 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width); * * Description of port entries: * DMA: DMA controller - * PIC0: Programmable Interrupt Controller (8259_a) + * PIC0: Programmable Interrupt Controller (8259A) * PIT1: System Timer 1 * PIT2: System Timer 2 failsafe * RTC: Real-time clock diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index a716fede4f25..7bfd649d1996 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -104,8 +104,8 @@ ACPI_EXPORT_SYMBOL(acpi_reset) * * FUNCTION: acpi_read * - * PARAMETERS: Value - Where the value is returned - * Reg - GAS register structure + * PARAMETERS: value - Where the value is returned + * reg - GAS register structure * * RETURN: Status * @@ -113,7 +113,7 @@ ACPI_EXPORT_SYMBOL(acpi_reset) * * LIMITATIONS: * bit_width must be exactly 8, 16, 32, or 64. - * space_iD must be system_memory or system_iO. + * space_ID must be system_memory or system_IO. * bit_offset and access_width are currently ignored, as there has * not been a need to implement these. * @@ -196,8 +196,8 @@ ACPI_EXPORT_SYMBOL(acpi_read) * * FUNCTION: acpi_write * - * PARAMETERS: Value - Value to be written - * Reg - GAS register structure + * PARAMETERS: value - Value to be written + * reg - GAS register structure * * RETURN: Status * @@ -441,7 +441,7 @@ ACPI_EXPORT_SYMBOL(acpi_write_bit_register) * *sleep_type_a - Where SLP_TYPa is returned * *sleep_type_b - Where SLP_TYPb is returned * - * RETURN: Status - ACPI status + * RETURN: status - ACPI status * * DESCRIPTION: Obtain the SLP_TYPa and SLP_TYPb values for the requested sleep * state. diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c index 762d059bb508..f8684bfe7907 100644 --- a/drivers/acpi/acpica/hwxfsleep.c +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -205,7 +205,7 @@ acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void) ACPI_FLUSH_CPU_CACHE(); status = acpi_hw_write_port(acpi_gbl_FADT.smi_command, - (u32)acpi_gbl_FADT.S4bios_request, 8); + (u32)acpi_gbl_FADT.s4_bios_request, 8); do { acpi_os_stall(1000); @@ -349,7 +349,7 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) * FUNCTION: acpi_enter_sleep_state * * PARAMETERS: sleep_state - Which sleep state to enter - * Flags - ACPI_EXECUTE_GTS to run optional method + * flags - ACPI_EXECUTE_GTS to run optional method * * RETURN: Status * @@ -382,7 +382,7 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) * FUNCTION: acpi_leave_sleep_state_prep * * PARAMETERS: sleep_state - Which sleep state we are exiting - * Flags - ACPI_EXECUTE_BFS to run optional method + * flags - ACPI_EXECUTE_BFS to run optional method * * RETURN: Status * diff --git a/drivers/acpi/acpica/nsaccess.c b/drivers/acpi/acpica/nsaccess.c index 61623f3f6826..23db53ce2293 100644 --- a/drivers/acpi/acpica/nsaccess.c +++ b/drivers/acpi/acpica/nsaccess.c @@ -157,7 +157,7 @@ acpi_status acpi_ns_root_initialize(void) #if defined (ACPI_ASL_COMPILER) - /* Save the parameter count for the i_aSL compiler */ + /* Save the parameter count for the iASL compiler */ new_node->value = obj_desc->method.param_count; #else @@ -258,11 +258,11 @@ acpi_status acpi_ns_root_initialize(void) * FUNCTION: acpi_ns_lookup * * PARAMETERS: scope_info - Current scope info block - * Pathname - Search pathname, in internal format + * pathname - Search pathname, in internal format * (as represented in the AML stream) - * Type - Type associated with name + * type - Type associated with name * interpreter_mode - IMODE_LOAD_PASS2 => add name if not found - * Flags - Flags describing the search restrictions + * flags - Flags describing the search restrictions * walk_state - Current state of the walk * return_node - Where the Node is placed (if found * or created successfully) diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c index 7c3d3ceb98b3..ac389e5bb594 100644 --- a/drivers/acpi/acpica/nsalloc.c +++ b/drivers/acpi/acpica/nsalloc.c @@ -52,7 +52,7 @@ ACPI_MODULE_NAME("nsalloc") * * FUNCTION: acpi_ns_create_node * - * PARAMETERS: Name - Name of the new node (4 char ACPI name) + * PARAMETERS: name - Name of the new node (4 char ACPI name) * * RETURN: New namespace node (Null on failure) * @@ -92,7 +92,7 @@ struct acpi_namespace_node *acpi_ns_create_node(u32 name) * * FUNCTION: acpi_ns_delete_node * - * PARAMETERS: Node - Node to be deleted + * PARAMETERS: node - Node to be deleted * * RETURN: None * @@ -143,7 +143,7 @@ void acpi_ns_delete_node(struct acpi_namespace_node *node) * * FUNCTION: acpi_ns_remove_node * - * PARAMETERS: Node - Node to be removed/deleted + * PARAMETERS: node - Node to be removed/deleted * * RETURN: None * @@ -196,8 +196,8 @@ void acpi_ns_remove_node(struct acpi_namespace_node *node) * * PARAMETERS: walk_state - Current state of the walk * parent_node - The parent of the new Node - * Node - The new Node to install - * Type - ACPI object type of the new Node + * node - The new Node to install + * type - ACPI object type of the new Node * * RETURN: None * diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c index 3f7f3f6e7dd5..7ee4e6aeb0a2 100644 --- a/drivers/acpi/acpica/nsdump.c +++ b/drivers/acpi/acpica/nsdump.c @@ -63,7 +63,7 @@ acpi_ns_dump_one_device(acpi_handle obj_handle, * FUNCTION: acpi_ns_print_pathname * * PARAMETERS: num_segments - Number of ACPI name segments - * Pathname - The compressed (internal) path + * pathname - The compressed (internal) path * * RETURN: None * @@ -107,10 +107,10 @@ void acpi_ns_print_pathname(u32 num_segments, char *pathname) * * FUNCTION: acpi_ns_dump_pathname * - * PARAMETERS: Handle - Object - * Msg - Prefix message - * Level - Desired debug level - * Component - Caller's component ID + * PARAMETERS: handle - Object + * msg - Prefix message + * level - Desired debug level + * component - Caller's component ID * * RETURN: None * @@ -143,8 +143,8 @@ acpi_ns_dump_pathname(acpi_handle handle, char *msg, u32 level, u32 component) * FUNCTION: acpi_ns_dump_one_object * * PARAMETERS: obj_handle - Node to be dumped - * Level - Nesting level of the handle - * Context - Passed into walk_namespace + * level - Nesting level of the handle + * context - Passed into walk_namespace * return_value - Not used * * RETURN: Status @@ -615,7 +615,7 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, * * FUNCTION: acpi_ns_dump_objects * - * PARAMETERS: Type - Object type to be dumped + * PARAMETERS: type - Object type to be dumped * display_type - 0 or ACPI_DISPLAY_SUMMARY * max_depth - Maximum depth of dump. Use ACPI_UINT32_MAX * for an effectively unlimited depth. @@ -671,7 +671,7 @@ acpi_ns_dump_objects(acpi_object_type type, * * FUNCTION: acpi_ns_dump_entry * - * PARAMETERS: Handle - Node to be dumped + * PARAMETERS: handle - Node to be dumped * debug_level - Output level * * RETURN: None diff --git a/drivers/acpi/acpica/nsdumpdv.c b/drivers/acpi/acpica/nsdumpdv.c index 3b5acb0eb406..944d4c8d9438 100644 --- a/drivers/acpi/acpica/nsdumpdv.c +++ b/drivers/acpi/acpica/nsdumpdv.c @@ -55,9 +55,9 @@ ACPI_MODULE_NAME("nsdumpdv") * * FUNCTION: acpi_ns_dump_one_device * - * PARAMETERS: Handle - Node to be dumped - * Level - Nesting level of the handle - * Context - Passed into walk_namespace + * PARAMETERS: handle - Node to be dumped + * level - Nesting level of the handle + * context - Passed into walk_namespace * return_value - Not used * * RETURN: Status diff --git a/drivers/acpi/acpica/nseval.c b/drivers/acpi/acpica/nseval.c index f375cb82e321..69074be498e8 100644 --- a/drivers/acpi/acpica/nseval.c +++ b/drivers/acpi/acpica/nseval.c @@ -59,11 +59,11 @@ acpi_ns_exec_module_code(union acpi_operand_object *method_obj, * * FUNCTION: acpi_ns_evaluate * - * PARAMETERS: Info - Evaluation info block, contains: + * PARAMETERS: info - Evaluation info block, contains: * prefix_node - Prefix or Method/Object Node to execute - * Pathname - Name of method to execute, If NULL, the + * pathname - Name of method to execute, If NULL, the * Node is the object to execute - * Parameters - List of parameters to pass to the method, + * parameters - List of parameters to pass to the method, * terminated by NULL. Params itself may be * NULL if no parameters are being passed. * return_object - Where to put method's return value (if @@ -71,7 +71,7 @@ acpi_ns_exec_module_code(union acpi_operand_object *method_obj, * parameter_type - Type of Parameter list * return_object - Where to put method's return value (if * any). If NULL, no value is returned. - * Flags - ACPI_IGNORE_RETURN_VALUE to delete return + * flags - ACPI_IGNORE_RETURN_VALUE to delete return * * RETURN: Status * @@ -351,7 +351,7 @@ void acpi_ns_exec_module_code_list(void) * FUNCTION: acpi_ns_exec_module_code * * PARAMETERS: method_obj - Object container for the module-level code - * Info - Info block for method evaluation + * info - Info block for method evaluation * * RETURN: None. Exceptions during method execution are ignored, since * we cannot abort a table load. diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c index 9d84ec2f0211..95ffe8dfa1f1 100644 --- a/drivers/acpi/acpica/nsinit.c +++ b/drivers/acpi/acpica/nsinit.c @@ -224,8 +224,8 @@ acpi_status acpi_ns_initialize_devices(void) * FUNCTION: acpi_ns_init_one_object * * PARAMETERS: obj_handle - Node - * Level - Current nesting level - * Context - Points to a init info struct + * level - Current nesting level + * context - Points to a init info struct * return_value - Not used * * RETURN: Status @@ -530,7 +530,7 @@ acpi_ns_init_one_device(acpi_handle obj_handle, * we will not run _INI, but we continue to examine the children * of this device. * - * From the ACPI spec, description of _STA: (Note - no mention + * From the ACPI spec, description of _STA: (note - no mention * of whether to run _INI or not on the device in question) * * "_STA may return bit 0 clear (not present) with bit 3 set diff --git a/drivers/acpi/acpica/nsload.c b/drivers/acpi/acpica/nsload.c index 5cbf15ffe7d8..76935ff29289 100644 --- a/drivers/acpi/acpica/nsload.c +++ b/drivers/acpi/acpica/nsload.c @@ -63,7 +63,7 @@ static acpi_status acpi_ns_delete_subtree(acpi_handle start_handle); * FUNCTION: acpi_ns_load_table * * PARAMETERS: table_index - Index for table to be loaded - * Node - Owning NS node + * node - Owning NS node * * RETURN: Status * @@ -278,7 +278,7 @@ static acpi_status acpi_ns_delete_subtree(acpi_handle start_handle) * * FUNCTION: acpi_ns_unload_name_space * - * PARAMETERS: Handle - Root of namespace subtree to be deleted + * PARAMETERS: handle - Root of namespace subtree to be deleted * * RETURN: Status * diff --git a/drivers/acpi/acpica/nsnames.c b/drivers/acpi/acpica/nsnames.c index b20e7c8c3ffb..96e0eb609bb4 100644 --- a/drivers/acpi/acpica/nsnames.c +++ b/drivers/acpi/acpica/nsnames.c @@ -53,8 +53,8 @@ ACPI_MODULE_NAME("nsnames") * * FUNCTION: acpi_ns_build_external_path * - * PARAMETERS: Node - NS node whose pathname is needed - * Size - Size of the pathname + * PARAMETERS: node - NS node whose pathname is needed + * size - Size of the pathname * *name_buffer - Where to return the pathname * * RETURN: Status @@ -120,7 +120,7 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node, * * FUNCTION: acpi_ns_get_external_pathname * - * PARAMETERS: Node - Namespace node whose pathname is needed + * PARAMETERS: node - Namespace node whose pathname is needed * * RETURN: Pointer to storage containing the fully qualified name of * the node, In external format (name segments separated by path @@ -168,7 +168,7 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node) * * FUNCTION: acpi_ns_get_pathname_length * - * PARAMETERS: Node - Namespace node + * PARAMETERS: node - Namespace node * * RETURN: Length of path, including prefix * @@ -214,7 +214,7 @@ acpi_size acpi_ns_get_pathname_length(struct acpi_namespace_node *node) * * PARAMETERS: target_handle - Handle of named object whose name is * to be found - * Buffer - Where the pathname is returned + * buffer - Where the pathname is returned * * RETURN: Status, Buffer is filled with pathname if status is AE_OK * diff --git a/drivers/acpi/acpica/nsobject.c b/drivers/acpi/acpica/nsobject.c index dd77a3ce6e50..d6c9a3cc6716 100644 --- a/drivers/acpi/acpica/nsobject.c +++ b/drivers/acpi/acpica/nsobject.c @@ -53,9 +53,9 @@ ACPI_MODULE_NAME("nsobject") * * FUNCTION: acpi_ns_attach_object * - * PARAMETERS: Node - Parent Node - * Object - Object to be attached - * Type - Type of object, or ACPI_TYPE_ANY if not + * PARAMETERS: node - Parent Node + * object - Object to be attached + * type - Type of object, or ACPI_TYPE_ANY if not * known * * RETURN: Status @@ -191,7 +191,7 @@ acpi_ns_attach_object(struct acpi_namespace_node *node, * * FUNCTION: acpi_ns_detach_object * - * PARAMETERS: Node - A Namespace node whose object will be detached + * PARAMETERS: node - A Namespace node whose object will be detached * * RETURN: None. * @@ -250,7 +250,7 @@ void acpi_ns_detach_object(struct acpi_namespace_node *node) * * FUNCTION: acpi_ns_get_attached_object * - * PARAMETERS: Node - Namespace node + * PARAMETERS: node - Namespace node * * RETURN: Current value of the object field from the Node whose * handle is passed @@ -285,7 +285,7 @@ union acpi_operand_object *acpi_ns_get_attached_object(struct * * FUNCTION: acpi_ns_get_secondary_object * - * PARAMETERS: Node - Namespace node + * PARAMETERS: node - Namespace node * * RETURN: Current value of the object field from the Node whose * handle is passed. @@ -315,9 +315,9 @@ union acpi_operand_object *acpi_ns_get_secondary_object(union * * FUNCTION: acpi_ns_attach_data * - * PARAMETERS: Node - Namespace node - * Handler - Handler to be associated with the data - * Data - Data to be attached + * PARAMETERS: node - Namespace node + * handler - Handler to be associated with the data + * data - Data to be attached * * RETURN: Status * @@ -372,8 +372,8 @@ acpi_ns_attach_data(struct acpi_namespace_node *node, * * FUNCTION: acpi_ns_detach_data * - * PARAMETERS: Node - Namespace node - * Handler - Handler associated with the data + * PARAMETERS: node - Namespace node + * handler - Handler associated with the data * * RETURN: Status * @@ -416,9 +416,9 @@ acpi_ns_detach_data(struct acpi_namespace_node * node, * * FUNCTION: acpi_ns_get_attached_data * - * PARAMETERS: Node - Namespace node - * Handler - Handler associated with the data - * Data - Where the data is returned + * PARAMETERS: node - Namespace node + * handler - Handler associated with the data + * data - Where the data is returned * * RETURN: Status * diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c index 23ce09686418..2419f417ea33 100644 --- a/drivers/acpi/acpica/nspredef.c +++ b/drivers/acpi/acpica/nspredef.c @@ -116,7 +116,7 @@ static const char *acpi_rtype_names[] = { * * FUNCTION: acpi_ns_check_predefined_names * - * PARAMETERS: Node - Namespace node for the method/object + * PARAMETERS: node - Namespace node for the method/object * user_param_count - Number of parameters actually passed * return_status - Status from the object evaluation * return_object_ptr - Pointer to the object returned from the @@ -275,10 +275,10 @@ cleanup: * * FUNCTION: acpi_ns_check_parameter_count * - * PARAMETERS: Pathname - Full pathname to the node (for error msgs) - * Node - Namespace node for the method/object + * PARAMETERS: pathname - Full pathname to the node (for error msgs) + * node - Namespace node for the method/object * user_param_count - Number of args passed in by the caller - * Predefined - Pointer to entry in predefined name table + * predefined - Pointer to entry in predefined name table * * RETURN: None * @@ -364,7 +364,7 @@ acpi_ns_check_parameter_count(char *pathname, * * FUNCTION: acpi_ns_check_for_predefined_name * - * PARAMETERS: Node - Namespace node for the method/object + * PARAMETERS: node - Namespace node for the method/object * * RETURN: Pointer to entry in predefined table. NULL indicates not found. * @@ -410,7 +410,7 @@ const union acpi_predefined_info *acpi_ns_check_for_predefined_name(struct * * FUNCTION: acpi_ns_check_package * - * PARAMETERS: Data - Pointer to validation data structure + * PARAMETERS: data - Pointer to validation data structure * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -638,7 +638,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* Create the new outer package and populate it */ status = - acpi_ns_wrap_with_package(data, *elements, + acpi_ns_wrap_with_package(data, return_object, return_object_ptr); if (ACPI_FAILURE(status)) { return (status); @@ -685,11 +685,11 @@ package_too_small: * * FUNCTION: acpi_ns_check_package_list * - * PARAMETERS: Data - Pointer to validation data structure - * Package - Pointer to package-specific info for method - * Elements - Element list of parent package. All elements + * PARAMETERS: data - Pointer to validation data structure + * package - Pointer to package-specific info for method + * elements - Element list of parent package. All elements * of this list should be of type Package. - * Count - Count of subpackages + * count - Count of subpackages * * RETURN: Status * @@ -911,12 +911,12 @@ package_too_small: * * FUNCTION: acpi_ns_check_package_elements * - * PARAMETERS: Data - Pointer to validation data structure - * Elements - Pointer to the package elements array - * Type1 - Object type for first group - * Count1 - Count for first group - * Type2 - Object type for second group - * Count2 - Count for second group + * PARAMETERS: data - Pointer to validation data structure + * elements - Pointer to the package elements array + * type1 - Object type for first group + * count1 - Count for first group + * type2 - Object type for second group + * count2 - Count for second group * start_index - Start of the first group of elements * * RETURN: Status @@ -968,7 +968,7 @@ acpi_ns_check_package_elements(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_check_object_type * - * PARAMETERS: Data - Pointer to validation data structure + * PARAMETERS: data - Pointer to validation data structure * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * expected_btypes - Bitmap of expected return type(s) @@ -1102,7 +1102,7 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_check_reference * - * PARAMETERS: Data - Pointer to validation data structure + * PARAMETERS: data - Pointer to validation data structure * return_object - Object returned from the evaluation of a * method or object * @@ -1140,7 +1140,7 @@ acpi_ns_check_reference(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_get_expected_types * - * PARAMETERS: Buffer - Pointer to where the string is returned + * PARAMETERS: buffer - Pointer to where the string is returned * expected_btypes - Bitmap of expected return type(s) * * RETURN: Buffer is populated with type names. diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c index 5519a64a353f..8c5f292860fc 100644 --- a/drivers/acpi/acpica/nsrepair.c +++ b/drivers/acpi/acpica/nsrepair.c @@ -94,7 +94,7 @@ acpi_ns_convert_to_buffer(union acpi_operand_object *original_object, * * FUNCTION: acpi_ns_repair_object * - * PARAMETERS: Data - Pointer to validation data structure + * PARAMETERS: data - Pointer to validation data structure * expected_btypes - Object types expected * package_index - Index of object within parent package (if * applicable - ACPI_NOT_PACKAGE_ELEMENT @@ -470,7 +470,7 @@ acpi_ns_convert_to_buffer(union acpi_operand_object *original_object, * * FUNCTION: acpi_ns_repair_null_element * - * PARAMETERS: Data - Pointer to validation data structure + * PARAMETERS: data - Pointer to validation data structure * expected_btypes - Object types expected * package_index - Index of object within parent package (if * applicable - ACPI_NOT_PACKAGE_ELEMENT @@ -509,17 +509,17 @@ acpi_ns_repair_null_element(struct acpi_predefined_data *data, */ if (expected_btypes & ACPI_RTYPE_INTEGER) { - /* Need an Integer - create a zero-value integer */ + /* Need an integer - create a zero-value integer */ new_object = acpi_ut_create_integer_object((u64)0); } else if (expected_btypes & ACPI_RTYPE_STRING) { - /* Need a String - create a NULL string */ + /* Need a string - create a NULL string */ new_object = acpi_ut_create_string_object(0); } else if (expected_btypes & ACPI_RTYPE_BUFFER) { - /* Need a Buffer - create a zero-length buffer */ + /* Need a buffer - create a zero-length buffer */ new_object = acpi_ut_create_buffer_object(0); } else { @@ -552,7 +552,7 @@ acpi_ns_repair_null_element(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_remove_null_elements * - * PARAMETERS: Data - Pointer to validation data structure + * PARAMETERS: data - Pointer to validation data structure * package_type - An acpi_return_package_types value * obj_desc - A Package object * @@ -635,7 +635,7 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_wrap_with_package * - * PARAMETERS: Data - Pointer to validation data structure + * PARAMETERS: data - Pointer to validation data structure * original_object - Pointer to the object to repair. * obj_desc_ptr - The new package object is returned here * diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c index 726bc8e687f7..90189251cdf0 100644 --- a/drivers/acpi/acpica/nsrepair2.c +++ b/drivers/acpi/acpica/nsrepair2.c @@ -149,8 +149,8 @@ static const struct acpi_repair_info acpi_ns_repairable_names[] = { * * FUNCTION: acpi_ns_complex_repairs * - * PARAMETERS: Data - Pointer to validation data structure - * Node - Namespace node for the method/object + * PARAMETERS: data - Pointer to validation data structure + * node - Namespace node for the method/object * validate_status - Original status of earlier validation * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object @@ -187,7 +187,7 @@ acpi_ns_complex_repairs(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_match_repairable_name * - * PARAMETERS: Node - Namespace node for the method/object + * PARAMETERS: node - Namespace node for the method/object * * RETURN: Pointer to entry in repair table. NULL indicates not found. * @@ -218,7 +218,7 @@ static const struct acpi_repair_info *acpi_ns_match_repairable_name(struct * * FUNCTION: acpi_ns_repair_ALR * - * PARAMETERS: Data - Pointer to validation data structure + * PARAMETERS: data - Pointer to validation data structure * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -247,7 +247,7 @@ acpi_ns_repair_ALR(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_repair_FDE * - * PARAMETERS: Data - Pointer to validation data structure + * PARAMETERS: data - Pointer to validation data structure * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -335,7 +335,7 @@ acpi_ns_repair_FDE(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_repair_CID * - * PARAMETERS: Data - Pointer to validation data structure + * PARAMETERS: data - Pointer to validation data structure * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -405,7 +405,7 @@ acpi_ns_repair_CID(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_repair_HID * - * PARAMETERS: Data - Pointer to validation data structure + * PARAMETERS: data - Pointer to validation data structure * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -487,7 +487,7 @@ acpi_ns_repair_HID(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_repair_TSS * - * PARAMETERS: Data - Pointer to validation data structure + * PARAMETERS: data - Pointer to validation data structure * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -531,7 +531,7 @@ acpi_ns_repair_TSS(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_repair_PSS * - * PARAMETERS: Data - Pointer to validation data structure + * PARAMETERS: data - Pointer to validation data structure * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -600,7 +600,7 @@ acpi_ns_repair_PSS(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_check_sorted_list * - * PARAMETERS: Data - Pointer to validation data structure + * PARAMETERS: data - Pointer to validation data structure * return_object - Pointer to the top-level returned object * expected_count - Minimum length of each sub-package * sort_index - Sub-package entry to sort on @@ -707,9 +707,9 @@ acpi_ns_check_sorted_list(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_sort_list * - * PARAMETERS: Elements - Package object element list - * Count - Element count for above - * Index - Sort by which package element + * PARAMETERS: elements - Package object element list + * count - Element count for above + * index - Sort by which package element * sort_direction - Ascending or Descending sort * * RETURN: None diff --git a/drivers/acpi/acpica/nssearch.c b/drivers/acpi/acpica/nssearch.c index 507043d66114..456cc859f869 100644 --- a/drivers/acpi/acpica/nssearch.c +++ b/drivers/acpi/acpica/nssearch.c @@ -65,7 +65,7 @@ acpi_ns_search_parent_tree(u32 target_name, * * PARAMETERS: target_name - Ascii ACPI name to search for * parent_node - Starting node where search will begin - * Type - Object type to match + * type - Object type to match * return_node - Where the matched Named obj is returned * * RETURN: Status @@ -175,8 +175,8 @@ acpi_ns_search_one_scope(u32 target_name, * FUNCTION: acpi_ns_search_parent_tree * * PARAMETERS: target_name - Ascii ACPI name to search for - * Node - Starting node where search will begin - * Type - Object type to match + * node - Starting node where search will begin + * type - Object type to match * return_node - Where the matched Node is returned * * RETURN: Status @@ -264,11 +264,11 @@ acpi_ns_search_parent_tree(u32 target_name, * * PARAMETERS: target_name - Ascii ACPI name to search for (4 chars) * walk_state - Current state of the walk - * Node - Starting node where search will begin + * node - Starting node where search will begin * interpreter_mode - Add names only in ACPI_MODE_LOAD_PASS_x. * Otherwise,search only. - * Type - Object type to match - * Flags - Flags describing the search restrictions + * type - Object type to match + * flags - Flags describing the search restrictions * return_node - Where the Node is returned * * RETURN: Status diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c index 75113759f69d..ef753a41e087 100644 --- a/drivers/acpi/acpica/nsutils.c +++ b/drivers/acpi/acpica/nsutils.c @@ -62,8 +62,8 @@ acpi_name acpi_ns_find_parent_name(struct acpi_namespace_node *node_to_search); * * FUNCTION: acpi_ns_print_node_pathname * - * PARAMETERS: Node - Object - * Message - Prefix message + * PARAMETERS: node - Object + * message - Prefix message * * DESCRIPTION: Print an object's full namespace pathname * Manages allocation/freeing of a pathname buffer @@ -101,7 +101,7 @@ acpi_ns_print_node_pathname(struct acpi_namespace_node *node, * * FUNCTION: acpi_ns_valid_root_prefix * - * PARAMETERS: Prefix - Character to be checked + * PARAMETERS: prefix - Character to be checked * * RETURN: TRUE if a valid prefix * @@ -119,7 +119,7 @@ u8 acpi_ns_valid_root_prefix(char prefix) * * FUNCTION: acpi_ns_valid_path_separator * - * PARAMETERS: Sep - Character to be checked + * PARAMETERS: sep - Character to be checked * * RETURN: TRUE if a valid path separator * @@ -137,7 +137,7 @@ static u8 acpi_ns_valid_path_separator(char sep) * * FUNCTION: acpi_ns_get_type * - * PARAMETERS: Node - Parent Node to be examined + * PARAMETERS: node - Parent Node to be examined * * RETURN: Type field from Node whose handle is passed * @@ -161,7 +161,7 @@ acpi_object_type acpi_ns_get_type(struct acpi_namespace_node * node) * * FUNCTION: acpi_ns_local * - * PARAMETERS: Type - A namespace object type + * PARAMETERS: type - A namespace object type * * RETURN: LOCAL if names must be found locally in objects of the * passed type, 0 if enclosing scopes should be searched @@ -189,7 +189,7 @@ u32 acpi_ns_local(acpi_object_type type) * * FUNCTION: acpi_ns_get_internal_name_length * - * PARAMETERS: Info - Info struct initialized with the + * PARAMETERS: info - Info struct initialized with the * external name pointer. * * RETURN: None @@ -260,7 +260,7 @@ void acpi_ns_get_internal_name_length(struct acpi_namestring_info *info) * * FUNCTION: acpi_ns_build_internal_name * - * PARAMETERS: Info - Info struct fully initialized + * PARAMETERS: info - Info struct fully initialized * * RETURN: Status * @@ -371,7 +371,7 @@ acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info) * FUNCTION: acpi_ns_internalize_name * * PARAMETERS: *external_name - External representation of name - * **Converted Name - Where to return the resulting + * **Converted name - Where to return the resulting * internal represention of the name * * RETURN: Status @@ -575,7 +575,7 @@ acpi_ns_externalize_name(u32 internal_name_length, * * FUNCTION: acpi_ns_validate_handle * - * PARAMETERS: Handle - Handle to be validated and typecast to a + * PARAMETERS: handle - Handle to be validated and typecast to a * namespace node. * * RETURN: A pointer to a namespace node @@ -651,7 +651,7 @@ void acpi_ns_terminate(void) * * FUNCTION: acpi_ns_opens_scope * - * PARAMETERS: Type - A valid namespace type + * PARAMETERS: type - A valid namespace type * * RETURN: NEWSCOPE if the passed type "opens a name scope" according * to the ACPI specification, else 0 @@ -677,14 +677,14 @@ u32 acpi_ns_opens_scope(acpi_object_type type) * * FUNCTION: acpi_ns_get_node * - * PARAMETERS: *Pathname - Name to be found, in external (ASL) format. The + * PARAMETERS: *pathname - Name to be found, in external (ASL) format. The * \ (backslash) and ^ (carat) prefixes, and the * . (period) to separate segments are supported. * prefix_node - Root of subtree to be searched, or NS_ALL for the * root of the name space. If Name is fully * qualified (first s8 is '\'), the passed value * of Scope will not be accessed. - * Flags - Used to indicate whether to perform upsearch or + * flags - Used to indicate whether to perform upsearch or * not. * return_node - Where the Node is returned * diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c index f69895a54895..730bccc5e7f7 100644 --- a/drivers/acpi/acpica/nswalk.c +++ b/drivers/acpi/acpica/nswalk.c @@ -88,7 +88,7 @@ struct acpi_namespace_node *acpi_ns_get_next_node(struct acpi_namespace_node * * FUNCTION: acpi_ns_get_next_node_typed * - * PARAMETERS: Type - Type of node to be searched for + * PARAMETERS: type - Type of node to be searched for * parent_node - Parent node whose children we are * getting * child_node - Previous child that was found. @@ -151,16 +151,16 @@ struct acpi_namespace_node *acpi_ns_get_next_node_typed(acpi_object_type type, * * FUNCTION: acpi_ns_walk_namespace * - * PARAMETERS: Type - acpi_object_type to search for + * PARAMETERS: type - acpi_object_type to search for * start_node - Handle in namespace where search begins * max_depth - Depth to which search is to reach - * Flags - Whether to unlock the NS before invoking + * flags - Whether to unlock the NS before invoking * the callback routine * pre_order_visit - Called during tree pre-order visit * when an object of "Type" is found * post_order_visit - Called during tree post-order visit * when an object of "Type" is found - * Context - Passed to user function(s) above + * context - Passed to user function(s) above * return_value - from the user_function if terminated * early. Otherwise, returns NULL. * RETURNS: Status diff --git a/drivers/acpi/acpica/nsxfeval.c b/drivers/acpi/acpica/nsxfeval.c index 71d15f61807b..9692e6702333 100644 --- a/drivers/acpi/acpica/nsxfeval.c +++ b/drivers/acpi/acpica/nsxfeval.c @@ -58,8 +58,8 @@ static void acpi_ns_resolve_references(struct acpi_evaluate_info *info); * * FUNCTION: acpi_evaluate_object_typed * - * PARAMETERS: Handle - Object handle (optional) - * Pathname - Object pathname (optional) + * PARAMETERS: handle - Object handle (optional) + * pathname - Object pathname (optional) * external_params - List of parameters to pass to method, * terminated by NULL. May be NULL * if no parameters are being passed. @@ -152,8 +152,8 @@ ACPI_EXPORT_SYMBOL(acpi_evaluate_object_typed) * * FUNCTION: acpi_evaluate_object * - * PARAMETERS: Handle - Object handle (optional) - * Pathname - Object pathname (optional) + * PARAMETERS: handle - Object handle (optional) + * pathname - Object pathname (optional) * external_params - List of parameters to pass to method, * terminated by NULL. May be NULL * if no parameters are being passed. @@ -364,7 +364,7 @@ ACPI_EXPORT_SYMBOL(acpi_evaluate_object) * * FUNCTION: acpi_ns_resolve_references * - * PARAMETERS: Info - Evaluation info block + * PARAMETERS: info - Evaluation info block * * RETURN: Info->return_object is replaced with the dereferenced object * @@ -431,14 +431,14 @@ static void acpi_ns_resolve_references(struct acpi_evaluate_info *info) * * FUNCTION: acpi_walk_namespace * - * PARAMETERS: Type - acpi_object_type to search for + * PARAMETERS: type - acpi_object_type to search for * start_object - Handle in namespace where search begins * max_depth - Depth to which search is to reach * pre_order_visit - Called during tree pre-order visit * when an object of "Type" is found * post_order_visit - Called during tree post-order visit * when an object of "Type" is found - * Context - Passed to user function(s) above + * context - Passed to user function(s) above * return_value - Location where return value of * user_function is put if terminated early * @@ -646,7 +646,7 @@ acpi_ns_get_device_callback(acpi_handle obj_handle, * * PARAMETERS: HID - HID to search for. Can be NULL. * user_function - Called when a matching object is found - * Context - Passed to user function + * context - Passed to user function * return_value - Location where return value of * user_function is put if terminated early * @@ -716,8 +716,8 @@ ACPI_EXPORT_SYMBOL(acpi_get_devices) * FUNCTION: acpi_attach_data * * PARAMETERS: obj_handle - Namespace node - * Handler - Handler for this attachment - * Data - Pointer to data to be attached + * handler - Handler for this attachment + * data - Pointer to data to be attached * * RETURN: Status * @@ -764,7 +764,7 @@ ACPI_EXPORT_SYMBOL(acpi_attach_data) * FUNCTION: acpi_detach_data * * PARAMETERS: obj_handle - Namespace node handle - * Handler - Handler used in call to acpi_attach_data + * handler - Handler used in call to acpi_attach_data * * RETURN: Status * @@ -810,8 +810,8 @@ ACPI_EXPORT_SYMBOL(acpi_detach_data) * FUNCTION: acpi_get_data * * PARAMETERS: obj_handle - Namespace node - * Handler - Handler used in call to attach_data - * Data - Where the data is returned + * handler - Handler used in call to attach_data + * data - Where the data is returned * * RETURN: Status * diff --git a/drivers/acpi/acpica/nsxfname.c b/drivers/acpi/acpica/nsxfname.c index af401c9c4dfc..08e9610b34ca 100644 --- a/drivers/acpi/acpica/nsxfname.c +++ b/drivers/acpi/acpica/nsxfname.c @@ -61,8 +61,8 @@ static char *acpi_ns_copy_device_id(struct acpica_device_id *dest, * * FUNCTION: acpi_get_handle * - * PARAMETERS: Parent - Object to search under (search scope). - * Pathname - Pointer to an asciiz string containing the + * PARAMETERS: parent - Object to search under (search scope). + * pathname - Pointer to an asciiz string containing the * name * ret_handle - Where the return handle is returned * @@ -142,9 +142,9 @@ ACPI_EXPORT_SYMBOL(acpi_get_handle) * * FUNCTION: acpi_get_name * - * PARAMETERS: Handle - Handle to be converted to a pathname + * PARAMETERS: handle - Handle to be converted to a pathname * name_type - Full pathname or single segment - * Buffer - Buffer for returned path + * buffer - Buffer for returned path * * RETURN: Pointer to a string containing the fully qualified Name. * @@ -219,8 +219,8 @@ ACPI_EXPORT_SYMBOL(acpi_get_name) * * FUNCTION: acpi_ns_copy_device_id * - * PARAMETERS: Dest - Pointer to the destination DEVICE_ID - * Source - Pointer to the source DEVICE_ID + * PARAMETERS: dest - Pointer to the destination DEVICE_ID + * source - Pointer to the source DEVICE_ID * string_area - Pointer to where to copy the dest string * * RETURN: Pointer to the next string area @@ -247,7 +247,7 @@ static char *acpi_ns_copy_device_id(struct acpica_device_id *dest, * * FUNCTION: acpi_get_object_info * - * PARAMETERS: Handle - Object Handle + * PARAMETERS: handle - Object Handle * return_buffer - Where the info is returned * * RETURN: Status @@ -493,7 +493,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_object_info) * * FUNCTION: acpi_install_method * - * PARAMETERS: Buffer - An ACPI table containing one control method + * PARAMETERS: buffer - An ACPI table containing one control method * * RETURN: Status * diff --git a/drivers/acpi/acpica/nsxfobj.c b/drivers/acpi/acpica/nsxfobj.c index 880a605cee20..6766fc4f088f 100644 --- a/drivers/acpi/acpica/nsxfobj.c +++ b/drivers/acpi/acpica/nsxfobj.c @@ -98,7 +98,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_id) * * FUNCTION: acpi_get_type * - * PARAMETERS: Handle - Handle of object whose type is desired + * PARAMETERS: handle - Handle of object whose type is desired * ret_type - Where the type will be placed * * RETURN: Status @@ -151,7 +151,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_type) * * FUNCTION: acpi_get_parent * - * PARAMETERS: Handle - Handle of object whose parent is desired + * PARAMETERS: handle - Handle of object whose parent is desired * ret_handle - Where the parent handle will be placed * * RETURN: Status @@ -212,8 +212,8 @@ ACPI_EXPORT_SYMBOL(acpi_get_parent) * * FUNCTION: acpi_get_next_object * - * PARAMETERS: Type - Type of object to be searched for - * Parent - Parent object whose children we are getting + * PARAMETERS: type - Type of object to be searched for + * parent - Parent object whose children we are getting * last_child - Previous child that was found. * The NEXT child will be returned * ret_handle - Where handle to the next object is placed diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c index 5ac36aba507c..844464c4f901 100644 --- a/drivers/acpi/acpica/psargs.c +++ b/drivers/acpi/acpica/psargs.c @@ -210,7 +210,7 @@ char *acpi_ps_get_next_namestring(struct acpi_parse_state *parser_state) * FUNCTION: acpi_ps_get_next_namepath * * PARAMETERS: parser_state - Current parser state object - * Arg - Where the namepath will be stored + * arg - Where the namepath will be stored * arg_count - If the namepath points to a control method * the method's argument is returned here. * possible_method_call - Whether the namepath can possibly be the @@ -379,7 +379,7 @@ acpi_ps_get_next_namepath(struct acpi_walk_state *walk_state, * * PARAMETERS: parser_state - Current parser state object * arg_type - The argument type (AML_*_ARG) - * Arg - Where the argument is returned + * arg - Where the argument is returned * * RETURN: None * @@ -618,6 +618,7 @@ static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state arg = acpi_ps_alloc_op(AML_INT_BYTELIST_OP); if (!arg) { + acpi_ps_free_op(field); return_PTR(NULL); } @@ -662,6 +663,7 @@ static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state } else { arg = acpi_ps_alloc_op(AML_INT_NAMEPATH_OP); if (!arg) { + acpi_ps_free_op(field); return_PTR(NULL); } diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c index 9547ad8a620b..799162c1b6df 100644 --- a/drivers/acpi/acpica/psloop.c +++ b/drivers/acpi/acpica/psloop.c @@ -167,7 +167,7 @@ static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state) * PARAMETERS: walk_state - Current state * aml_op_start - Begin of named Op in AML * unnamed_op - Early Op (not a named Op) - * Op - Returned Op + * op - Returned Op * * RETURN: Status * @@ -323,7 +323,7 @@ acpi_ps_create_op(struct acpi_walk_state *walk_state, if (walk_state->op_info->flags & AML_CREATE) { /* - * Backup to beginning of create_xXXfield declaration + * Backup to beginning of create_XXXfield declaration * body_length is unknown until we parse the body */ op->named.data = aml_op_start; @@ -380,7 +380,7 @@ acpi_ps_create_op(struct acpi_walk_state *walk_state, * * PARAMETERS: walk_state - Current state * aml_op_start - Op start in AML - * Op - Current Op + * op - Current Op * * RETURN: Status * @@ -679,8 +679,8 @@ acpi_ps_link_module_code(union acpi_parse_object *parent_op, * FUNCTION: acpi_ps_complete_op * * PARAMETERS: walk_state - Current state - * Op - Returned Op - * Status - Parse status before complete Op + * op - Returned Op + * status - Parse status before complete Op * * RETURN: Status * @@ -853,8 +853,8 @@ acpi_ps_complete_op(struct acpi_walk_state *walk_state, * FUNCTION: acpi_ps_complete_final_op * * PARAMETERS: walk_state - Current state - * Op - Current Op - * Status - Current parse status before complete last + * op - Current Op + * status - Current parse status before complete last * Op * * RETURN: Status @@ -1165,7 +1165,7 @@ acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state) if (walk_state->op_info->flags & AML_CREATE) { /* - * Backup to beginning of create_xXXfield declaration (1 for + * Backup to beginning of create_XXXfield declaration (1 for * Opcode) * * body_length is unknown until we parse the body diff --git a/drivers/acpi/acpica/psopcode.c b/drivers/acpi/acpica/psopcode.c index a0226fdcf75c..ed1d457bd5ca 100644 --- a/drivers/acpi/acpica/psopcode.c +++ b/drivers/acpi/acpica/psopcode.c @@ -724,7 +724,7 @@ static const u8 acpi_gbl_long_op_index[NUM_EXTENDED_OPCODE] = { * * FUNCTION: acpi_ps_get_opcode_info * - * PARAMETERS: Opcode - The AML opcode + * PARAMETERS: opcode - The AML opcode * * RETURN: A pointer to the info about the opcode. * @@ -769,7 +769,7 @@ const struct acpi_opcode_info *acpi_ps_get_opcode_info(u16 opcode) * * FUNCTION: acpi_ps_get_opcode_name * - * PARAMETERS: Opcode - The AML opcode + * PARAMETERS: opcode - The AML opcode * * RETURN: A pointer to the name of the opcode (ASCII String) * Note: Never returns NULL. diff --git a/drivers/acpi/acpica/psparse.c b/drivers/acpi/acpica/psparse.c index 2ff9c35a1968..01985703bb98 100644 --- a/drivers/acpi/acpica/psparse.c +++ b/drivers/acpi/acpica/psparse.c @@ -64,7 +64,7 @@ ACPI_MODULE_NAME("psparse") * * FUNCTION: acpi_ps_get_opcode_size * - * PARAMETERS: Opcode - An AML opcode + * PARAMETERS: opcode - An AML opcode * * RETURN: Size of the opcode, in bytes (1 or 2) * @@ -121,7 +121,7 @@ u16 acpi_ps_peek_opcode(struct acpi_parse_state * parser_state) * FUNCTION: acpi_ps_complete_this_op * * PARAMETERS: walk_state - Current State - * Op - Op to complete + * op - Op to complete * * RETURN: Status * @@ -311,7 +311,7 @@ acpi_ps_complete_this_op(struct acpi_walk_state * walk_state, * FUNCTION: acpi_ps_next_parse_state * * PARAMETERS: walk_state - Current state - * Op - Current parse op + * op - Current parse op * callback_status - Status from previous operation * * RETURN: Status diff --git a/drivers/acpi/acpica/psscope.c b/drivers/acpi/acpica/psscope.c index c872aa4b926e..608dc20dc173 100644 --- a/drivers/acpi/acpica/psscope.c +++ b/drivers/acpi/acpica/psscope.c @@ -93,7 +93,7 @@ u8 acpi_ps_has_completed_scope(struct acpi_parse_state * parser_state) * FUNCTION: acpi_ps_init_scope * * PARAMETERS: parser_state - Current parser state object - * Root - the Root Node of this new scope + * root - the Root Node of this new scope * * RETURN: Status * @@ -131,7 +131,7 @@ acpi_ps_init_scope(struct acpi_parse_state * parser_state, * FUNCTION: acpi_ps_push_scope * * PARAMETERS: parser_state - Current parser state object - * Op - Current op to be pushed + * op - Current op to be pushed * remaining_args - List of args remaining * arg_count - Fixed or variable number of args * @@ -184,7 +184,7 @@ acpi_ps_push_scope(struct acpi_parse_state *parser_state, * FUNCTION: acpi_ps_pop_scope * * PARAMETERS: parser_state - Current parser state object - * Op - Where the popped op is returned + * op - Where the popped op is returned * arg_list - Where the popped "next argument" is * returned * arg_count - Count of objects in arg_list diff --git a/drivers/acpi/acpica/pstree.c b/drivers/acpi/acpica/pstree.c index 2b03cdbbe1c0..fdb2e71f3046 100644 --- a/drivers/acpi/acpica/pstree.c +++ b/drivers/acpi/acpica/pstree.c @@ -58,8 +58,8 @@ union acpi_parse_object *acpi_ps_get_child(union acpi_parse_object *op); * * FUNCTION: acpi_ps_get_arg * - * PARAMETERS: Op - Get an argument for this op - * Argn - Nth argument to get + * PARAMETERS: op - Get an argument for this op + * argn - Nth argument to get * * RETURN: The argument (as an Op object). NULL if argument does not exist * @@ -114,8 +114,8 @@ union acpi_parse_object *acpi_ps_get_arg(union acpi_parse_object *op, u32 argn) * * FUNCTION: acpi_ps_append_arg * - * PARAMETERS: Op - Append an argument to this Op. - * Arg - Argument Op to append + * PARAMETERS: op - Append an argument to this Op. + * arg - Argument Op to append * * RETURN: None. * @@ -188,8 +188,8 @@ acpi_ps_append_arg(union acpi_parse_object *op, union acpi_parse_object *arg) * * FUNCTION: acpi_ps_get_depth_next * - * PARAMETERS: Origin - Root of subtree to search - * Op - Last (previous) Op that was found + * PARAMETERS: origin - Root of subtree to search + * op - Last (previous) Op that was found * * RETURN: Next Op found in the search. * @@ -261,7 +261,7 @@ union acpi_parse_object *acpi_ps_get_depth_next(union acpi_parse_object *origin, * * FUNCTION: acpi_ps_get_child * - * PARAMETERS: Op - Get the child of this Op + * PARAMETERS: op - Get the child of this Op * * RETURN: Child Op, Null if none is found. * diff --git a/drivers/acpi/acpica/psutils.c b/drivers/acpi/acpica/psutils.c index 13bb131ae125..8736ad5f04d3 100644 --- a/drivers/acpi/acpica/psutils.c +++ b/drivers/acpi/acpica/psutils.c @@ -77,8 +77,8 @@ union acpi_parse_object *acpi_ps_create_scope_op(void) * * FUNCTION: acpi_ps_init_op * - * PARAMETERS: Op - A newly allocated Op object - * Opcode - Opcode to store in the Op + * PARAMETERS: op - A newly allocated Op object + * opcode - Opcode to store in the Op * * RETURN: None * @@ -103,7 +103,7 @@ void acpi_ps_init_op(union acpi_parse_object *op, u16 opcode) * * FUNCTION: acpi_ps_alloc_op * - * PARAMETERS: Opcode - Opcode that will be stored in the new Op + * PARAMETERS: opcode - Opcode that will be stored in the new Op * * RETURN: Pointer to the new Op, null on failure * @@ -160,7 +160,7 @@ union acpi_parse_object *acpi_ps_alloc_op(u16 opcode) * * FUNCTION: acpi_ps_free_op * - * PARAMETERS: Op - Op to be freed + * PARAMETERS: op - Op to be freed * * RETURN: None. * diff --git a/drivers/acpi/acpica/psxface.c b/drivers/acpi/acpica/psxface.c index 9d98c5ff66a5..963e16225797 100644 --- a/drivers/acpi/acpica/psxface.c +++ b/drivers/acpi/acpica/psxface.c @@ -66,7 +66,7 @@ acpi_ps_update_parameter_list(struct acpi_evaluate_info *info, u16 action); * PARAMETERS: method_name - Valid ACPI name string * debug_level - Optional level mask. 0 to use default * debug_layer - Optional layer mask. 0 to use default - * Flags - bit 1: one shot(1) or persistent(0) + * flags - bit 1: one shot(1) or persistent(0) * * RETURN: Status * @@ -105,7 +105,7 @@ acpi_debug_trace(char *name, u32 debug_level, u32 debug_layer, u32 flags) * * FUNCTION: acpi_ps_start_trace * - * PARAMETERS: Info - Method info struct + * PARAMETERS: info - Method info struct * * RETURN: None * @@ -150,7 +150,7 @@ static void acpi_ps_start_trace(struct acpi_evaluate_info *info) * * FUNCTION: acpi_ps_stop_trace * - * PARAMETERS: Info - Method info struct + * PARAMETERS: info - Method info struct * * RETURN: None * @@ -193,10 +193,10 @@ static void acpi_ps_stop_trace(struct acpi_evaluate_info *info) * * FUNCTION: acpi_ps_execute_method * - * PARAMETERS: Info - Method info block, contains: - * Node - Method Node to execute + * PARAMETERS: info - Method info block, contains: + * node - Method Node to execute * obj_desc - Method object - * Parameters - List of parameters to pass to the method, + * parameters - List of parameters to pass to the method, * terminated by NULL. Params itself may be * NULL if no parameters are being passed. * return_object - Where to put method's return value (if @@ -361,9 +361,9 @@ acpi_status acpi_ps_execute_method(struct acpi_evaluate_info *info) * * FUNCTION: acpi_ps_update_parameter_list * - * PARAMETERS: Info - See struct acpi_evaluate_info + * PARAMETERS: info - See struct acpi_evaluate_info * (Used: parameter_type and Parameters) - * Action - Add or Remove reference + * action - Add or Remove reference * * RETURN: Status * diff --git a/drivers/acpi/acpica/rsaddr.c b/drivers/acpi/acpica/rsaddr.c index a0305652394f..856ff075b6ab 100644 --- a/drivers/acpi/acpica/rsaddr.c +++ b/drivers/acpi/acpica/rsaddr.c @@ -182,8 +182,8 @@ struct acpi_rsconvert_info acpi_rs_convert_ext_address64[5] = { /* Revision ID */ - {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.ext_address64.revision_iD), - AML_OFFSET(ext_address64.revision_iD), + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.ext_address64.revision_ID), + AML_OFFSET(ext_address64.revision_ID), 1}, /* * These fields are contiguous in both the source and destination: @@ -215,7 +215,7 @@ static struct acpi_rsconvert_info acpi_rs_convert_general_flags[6] = { AML_OFFSET(address.resource_type), 1}, - /* General Flags - Consume, Decode, min_fixed, max_fixed */ + /* General flags - Consume, Decode, min_fixed, max_fixed */ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.address.producer_consumer), AML_OFFSET(address.flags), @@ -293,8 +293,8 @@ static struct acpi_rsconvert_info acpi_rs_convert_io_flags[4] = { * * FUNCTION: acpi_rs_get_address_common * - * PARAMETERS: Resource - Pointer to the internal resource struct - * Aml - Pointer to the AML resource descriptor + * PARAMETERS: resource - Pointer to the internal resource struct + * aml - Pointer to the AML resource descriptor * * RETURN: TRUE if the resource_type field is OK, FALSE otherwise * @@ -343,8 +343,8 @@ acpi_rs_get_address_common(struct acpi_resource *resource, * * FUNCTION: acpi_rs_set_address_common * - * PARAMETERS: Aml - Pointer to the AML resource descriptor - * Resource - Pointer to the internal resource struct + * PARAMETERS: aml - Pointer to the AML resource descriptor + * resource - Pointer to the internal resource struct * * RETURN: None * diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c index 3c6df4b7eb2d..de12469d1c9c 100644 --- a/drivers/acpi/acpica/rscalc.c +++ b/drivers/acpi/acpica/rscalc.c @@ -173,7 +173,7 @@ acpi_rs_stream_option_length(u32 resource_length, * * FUNCTION: acpi_rs_get_aml_length * - * PARAMETERS: Resource - Pointer to the resource linked list + * PARAMETERS: resource - Pointer to the resource linked list * size_needed - Where the required size is returned * * RETURN: Status diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c index 46d6eb38ae66..311cbc4f05fa 100644 --- a/drivers/acpi/acpica/rscreate.c +++ b/drivers/acpi/acpica/rscreate.c @@ -190,8 +190,8 @@ acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer, * * FUNCTION: acpi_rs_create_pci_routing_table * - * PARAMETERS: package_object - Pointer to a union acpi_operand_object - * package + * PARAMETERS: package_object - Pointer to a package containing one + * of more ACPI_OPERAND_OBJECTs * output_buffer - Pointer to the user's buffer * * RETURN: Status AE_OK if okay, else a valid acpi_status code. @@ -199,7 +199,7 @@ acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer, * AE_BUFFER_OVERFLOW and output_buffer->Length will point * to the size buffer needed. * - * DESCRIPTION: Takes the union acpi_operand_object package and creates a + * DESCRIPTION: Takes the union acpi_operand_object package and creates a * linked list of PCI interrupt descriptions * * NOTE: It is the caller's responsibility to ensure that the start of the diff --git a/drivers/acpi/acpica/rsdump.c b/drivers/acpi/acpica/rsdump.c index b4c581132393..4d11b072388c 100644 --- a/drivers/acpi/acpica/rsdump.c +++ b/drivers/acpi/acpica/rsdump.c @@ -703,7 +703,7 @@ acpi_rs_dump_resource_source(struct acpi_resource_source *resource_source) * * FUNCTION: acpi_rs_dump_address_common * - * PARAMETERS: Resource - Pointer to an internal resource descriptor + * PARAMETERS: resource - Pointer to an internal resource descriptor * * RETURN: None * @@ -850,8 +850,8 @@ void acpi_rs_dump_irq_list(u8 * route_table) * * FUNCTION: acpi_rs_out* * - * PARAMETERS: Title - Name of the resource field - * Value - Value of the resource field + * PARAMETERS: title - Name of the resource field + * value - Value of the resource field * * RETURN: None * @@ -898,8 +898,8 @@ static void acpi_rs_out_title(char *title) * * FUNCTION: acpi_rs_dump*List * - * PARAMETERS: Length - Number of elements in the list - * Data - Start of the list + * PARAMETERS: length - Number of elements in the list + * data - Start of the list * * RETURN: None * diff --git a/drivers/acpi/acpica/rslist.c b/drivers/acpi/acpica/rslist.c index 9be129f5d6f4..46b5324b22d6 100644 --- a/drivers/acpi/acpica/rslist.c +++ b/drivers/acpi/acpica/rslist.c @@ -139,7 +139,7 @@ acpi_rs_convert_aml_to_resources(u8 * aml, * * FUNCTION: acpi_rs_convert_resources_to_aml * - * PARAMETERS: Resource - Pointer to the resource linked list + * PARAMETERS: resource - Pointer to the resource linked list * aml_size_needed - Calculated size of the byte stream * needed from calling acpi_rs_get_aml_length() * The size of the output_buffer is diff --git a/drivers/acpi/acpica/rsmisc.c b/drivers/acpi/acpica/rsmisc.c index 8073b371cc7c..c6f291c2bc83 100644 --- a/drivers/acpi/acpica/rsmisc.c +++ b/drivers/acpi/acpica/rsmisc.c @@ -57,9 +57,9 @@ ACPI_MODULE_NAME("rsmisc") * * FUNCTION: acpi_rs_convert_aml_to_resource * - * PARAMETERS: Resource - Pointer to the resource descriptor - * Aml - Where the AML descriptor is returned - * Info - Pointer to appropriate conversion table + * PARAMETERS: resource - Pointer to the resource descriptor + * aml - Where the AML descriptor is returned + * info - Pointer to appropriate conversion table * * RETURN: Status * @@ -406,7 +406,7 @@ acpi_rs_convert_aml_to_resource(struct acpi_resource *resource, case ACPI_RSC_EXIT_NE: /* - * Control - Exit conversion if not equal + * control - Exit conversion if not equal */ switch (info->resource_offset) { case ACPI_RSC_COMPARE_AML_LENGTH: @@ -454,9 +454,9 @@ acpi_rs_convert_aml_to_resource(struct acpi_resource *resource, * * FUNCTION: acpi_rs_convert_resource_to_aml * - * PARAMETERS: Resource - Pointer to the resource descriptor - * Aml - Where the AML descriptor is returned - * Info - Pointer to appropriate conversion table + * PARAMETERS: resource - Pointer to the resource descriptor + * aml - Where the AML descriptor is returned + * info - Pointer to appropriate conversion table * * RETURN: Status * @@ -726,7 +726,7 @@ acpi_rs_convert_resource_to_aml(struct acpi_resource *resource, case ACPI_RSC_EXIT_LE: /* - * Control - Exit conversion if less than or equal + * control - Exit conversion if less than or equal */ if (item_count <= info->value) { goto exit; @@ -735,7 +735,7 @@ acpi_rs_convert_resource_to_aml(struct acpi_resource *resource, case ACPI_RSC_EXIT_NE: /* - * Control - Exit conversion if not equal + * control - Exit conversion if not equal */ switch (COMPARE_OPCODE(info)) { case ACPI_RSC_COMPARE_VALUE: @@ -757,7 +757,7 @@ acpi_rs_convert_resource_to_aml(struct acpi_resource *resource, case ACPI_RSC_EXIT_EQ: /* - * Control - Exit conversion if equal + * control - Exit conversion if equal */ if (*ACPI_ADD_PTR(u8, resource, COMPARE_TARGET(info)) == @@ -783,7 +783,7 @@ acpi_rs_convert_resource_to_aml(struct acpi_resource *resource, #if 0 /* Previous resource validations */ -if (aml->ext_address64.revision_iD != AML_RESOURCE_EXTENDED_ADDRESS_REVISION) { +if (aml->ext_address64.revision_ID != AML_RESOURCE_EXTENDED_ADDRESS_REVISION) { return_ACPI_STATUS(AE_SUPPORT); } diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c index 433a375deb93..37d5241c0acf 100644 --- a/drivers/acpi/acpica/rsutils.c +++ b/drivers/acpi/acpica/rsutils.c @@ -53,8 +53,8 @@ ACPI_MODULE_NAME("rsutils") * * FUNCTION: acpi_rs_decode_bitmask * - * PARAMETERS: Mask - Bitmask to decode - * List - Where the converted list is returned + * PARAMETERS: mask - Bitmask to decode + * list - Where the converted list is returned * * RETURN: Count of bits set (length of list) * @@ -86,8 +86,8 @@ u8 acpi_rs_decode_bitmask(u16 mask, u8 * list) * * FUNCTION: acpi_rs_encode_bitmask * - * PARAMETERS: List - List of values to encode - * Count - Length of list + * PARAMETERS: list - List of values to encode + * count - Length of list * * RETURN: Encoded bitmask * @@ -115,8 +115,8 @@ u16 acpi_rs_encode_bitmask(u8 * list, u8 count) * * FUNCTION: acpi_rs_move_data * - * PARAMETERS: Destination - Pointer to the destination descriptor - * Source - Pointer to the source descriptor + * PARAMETERS: destination - Pointer to the destination descriptor + * source - Pointer to the source descriptor * item_count - How many items to move * move_type - Byte width * @@ -183,7 +183,7 @@ acpi_rs_move_data(void *destination, void *source, u16 item_count, u8 move_type) * * PARAMETERS: total_length - Length of the AML descriptor, including * the header and length fields. - * Aml - Pointer to the raw AML descriptor + * aml - Pointer to the raw AML descriptor * * RETURN: None * @@ -235,7 +235,7 @@ acpi_rs_set_resource_length(acpi_rsdesc_size total_length, * PARAMETERS: descriptor_type - Byte to be inserted as the type * total_length - Length of the AML descriptor, including * the header and length fields. - * Aml - Pointer to the raw AML descriptor + * aml - Pointer to the raw AML descriptor * * RETURN: None * @@ -265,8 +265,8 @@ acpi_rs_set_resource_header(u8 descriptor_type, * * FUNCTION: acpi_rs_strcpy * - * PARAMETERS: Destination - Pointer to the destination string - * Source - Pointer to the source string + * PARAMETERS: destination - Pointer to the destination string + * source - Pointer to the source string * * RETURN: String length, including NULL terminator * @@ -300,7 +300,7 @@ static u16 acpi_rs_strcpy(char *destination, char *source) * minimum_length - Minimum length of the descriptor (minus * any optional fields) * resource_source - Where the resource_source is returned - * Aml - Pointer to the raw AML descriptor + * aml - Pointer to the raw AML descriptor * string_ptr - (optional) where to store the actual * resource_source string * @@ -386,7 +386,7 @@ acpi_rs_get_resource_source(acpi_rs_length resource_length, * * FUNCTION: acpi_rs_set_resource_source * - * PARAMETERS: Aml - Pointer to the raw AML descriptor + * PARAMETERS: aml - Pointer to the raw AML descriptor * minimum_length - Minimum length of the descriptor (minus * any optional fields) * resource_source - Internal resource_source @@ -445,7 +445,7 @@ acpi_rs_set_resource_source(union aml_resource * aml, * * FUNCTION: acpi_rs_get_prt_method_data * - * PARAMETERS: Node - Device node + * PARAMETERS: node - Device node * ret_buffer - Pointer to a buffer structure for the * results * @@ -494,7 +494,7 @@ acpi_rs_get_prt_method_data(struct acpi_namespace_node * node, * * FUNCTION: acpi_rs_get_crs_method_data * - * PARAMETERS: Node - Device node + * PARAMETERS: node - Device node * ret_buffer - Pointer to a buffer structure for the * results * @@ -534,7 +534,7 @@ acpi_rs_get_crs_method_data(struct acpi_namespace_node *node, */ status = acpi_rs_create_resource_list(obj_desc, ret_buffer); - /* On exit, we must delete the object returned by evaluate_object */ + /* On exit, we must delete the object returned by evaluateObject */ acpi_ut_remove_reference(obj_desc); return_ACPI_STATUS(status); @@ -544,7 +544,7 @@ acpi_rs_get_crs_method_data(struct acpi_namespace_node *node, * * FUNCTION: acpi_rs_get_prs_method_data * - * PARAMETERS: Node - Device node + * PARAMETERS: node - Device node * ret_buffer - Pointer to a buffer structure for the * results * @@ -585,7 +585,7 @@ acpi_rs_get_prs_method_data(struct acpi_namespace_node *node, */ status = acpi_rs_create_resource_list(obj_desc, ret_buffer); - /* On exit, we must delete the object returned by evaluate_object */ + /* On exit, we must delete the object returned by evaluateObject */ acpi_ut_remove_reference(obj_desc); return_ACPI_STATUS(status); @@ -596,7 +596,7 @@ acpi_rs_get_prs_method_data(struct acpi_namespace_node *node, * * FUNCTION: acpi_rs_get_aei_method_data * - * PARAMETERS: Node - Device node + * PARAMETERS: node - Device node * ret_buffer - Pointer to a buffer structure for the * results * @@ -636,7 +636,7 @@ acpi_rs_get_aei_method_data(struct acpi_namespace_node *node, */ status = acpi_rs_create_resource_list(obj_desc, ret_buffer); - /* On exit, we must delete the object returned by evaluate_object */ + /* On exit, we must delete the object returned by evaluateObject */ acpi_ut_remove_reference(obj_desc); return_ACPI_STATUS(status); @@ -646,8 +646,8 @@ acpi_rs_get_aei_method_data(struct acpi_namespace_node *node, * * FUNCTION: acpi_rs_get_method_data * - * PARAMETERS: Handle - Handle to the containing object - * Path - Path to method, relative to Handle + * PARAMETERS: handle - Handle to the containing object + * path - Path to method, relative to Handle * ret_buffer - Pointer to a buffer structure for the * results * @@ -697,7 +697,7 @@ acpi_rs_get_method_data(acpi_handle handle, * * FUNCTION: acpi_rs_set_srs_method_data * - * PARAMETERS: Node - Device node + * PARAMETERS: node - Device node * in_buffer - Pointer to a buffer structure of the * parameter * diff --git a/drivers/acpi/acpica/rsxface.c b/drivers/acpi/acpica/rsxface.c index f58c098c7aeb..5aad744b5b83 100644 --- a/drivers/acpi/acpica/rsxface.c +++ b/drivers/acpi/acpica/rsxface.c @@ -79,7 +79,7 @@ acpi_rs_validate_parameters(acpi_handle device_handle, * FUNCTION: acpi_rs_validate_parameters * * PARAMETERS: device_handle - Handle to a device - * Buffer - Pointer to a data buffer + * buffer - Pointer to a data buffer * return_node - Pointer to where the device node is returned * * RETURN: Status @@ -351,8 +351,8 @@ ACPI_EXPORT_SYMBOL(acpi_get_event_resources) * * FUNCTION: acpi_resource_to_address64 * - * PARAMETERS: Resource - Pointer to a resource - * Out - Pointer to the users's return buffer + * PARAMETERS: resource - Pointer to a resource + * out - Pointer to the users's return buffer * (a struct acpi_resource_address64) * * RETURN: Status @@ -415,9 +415,9 @@ ACPI_EXPORT_SYMBOL(acpi_resource_to_address64) * FUNCTION: acpi_get_vendor_resource * * PARAMETERS: device_handle - Handle for the parent device object - * Name - Method name for the parent resource + * name - Method name for the parent resource * (METHOD_NAME__CRS or METHOD_NAME__PRS) - * Uuid - Pointer to the UUID to be matched. + * uuid - Pointer to the UUID to be matched. * includes both subtype and 16-byte UUID * ret_buffer - Where the vendor resource is returned * @@ -526,11 +526,11 @@ acpi_rs_match_vendor_resource(struct acpi_resource *resource, void *context) * * PARAMETERS: device_handle - Handle to the device object for the * device we are querying - * Name - Method name of the resources we want. + * name - Method name of the resources we want. * (METHOD_NAME__CRS, METHOD_NAME__PRS, or * METHOD_NAME__AEI) * user_function - Called for each resource - * Context - Passed to user_function + * context - Passed to user_function * * RETURN: Status * diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c index 4c9c760db4a4..390651860bf0 100644 --- a/drivers/acpi/acpica/tbfadt.c +++ b/drivers/acpi/acpica/tbfadt.c @@ -49,9 +49,10 @@ ACPI_MODULE_NAME("tbfadt") /* Local prototypes */ -static ACPI_INLINE void +static void acpi_tb_init_generic_address(struct acpi_generic_address *generic_address, - u8 space_id, u8 byte_width, u64 address); + u8 space_id, + u8 byte_width, u64 address, char *register_name); static void acpi_tb_convert_fadt(void); @@ -172,7 +173,7 @@ static struct acpi_fadt_pm_info fadt_pm_info_table[] = { * * PARAMETERS: generic_address - GAS struct to be initialized * byte_width - Width of this register - * Address - Address of the register + * address - Address of the register * * RETURN: None * @@ -182,10 +183,25 @@ static struct acpi_fadt_pm_info fadt_pm_info_table[] = { * ******************************************************************************/ -static ACPI_INLINE void +static void acpi_tb_init_generic_address(struct acpi_generic_address *generic_address, - u8 space_id, u8 byte_width, u64 address) + u8 space_id, + u8 byte_width, u64 address, char *register_name) { + u8 bit_width; + + /* Bit width field in the GAS is only one byte long, 255 max */ + + bit_width = (u8)(byte_width * 8); + + if (byte_width > 31) { /* (31*8)=248 */ + ACPI_ERROR((AE_INFO, + "%s - 32-bit FADT register is too long (%u bytes, %u bits) " + "to convert to GAS struct - 255 bits max, truncating", + register_name, byte_width, (byte_width * 8))); + + bit_width = 255; + } /* * The 64-bit Address field is non-aligned in the byte packed @@ -196,7 +212,7 @@ acpi_tb_init_generic_address(struct acpi_generic_address *generic_address, /* All other fields are byte-wide */ generic_address->space_id = space_id; - generic_address->bit_width = (u8)ACPI_MUL_8(byte_width); + generic_address->bit_width = bit_width; generic_address->bit_offset = 0; generic_address->access_width = 0; /* Access width ANY */ } @@ -267,8 +283,8 @@ void acpi_tb_parse_fadt(u32 table_index) * * FUNCTION: acpi_tb_create_local_fadt * - * PARAMETERS: Table - Pointer to BIOS FADT - * Length - Length of the table + * PARAMETERS: table - Pointer to BIOS FADT + * length - Length of the table * * RETURN: None * @@ -287,11 +303,11 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length) * a warning. */ if (length > sizeof(struct acpi_table_fadt)) { - ACPI_WARNING((AE_INFO, - "FADT (revision %u) is longer than ACPI 5.0 version, " - "truncating length %u to %u", - table->revision, length, - (u32)sizeof(struct acpi_table_fadt))); + ACPI_BIOS_WARNING((AE_INFO, + "FADT (revision %u) is longer than ACPI 5.0 version, " + "truncating length %u to %u", + table->revision, length, + (u32)sizeof(struct acpi_table_fadt))); } /* Clear the entire local FADT */ @@ -436,11 +452,13 @@ static void acpi_tb_convert_fadt(void) * they must match. */ if (address64->address && address32 && - (address64->address != (u64) address32)) { - ACPI_ERROR((AE_INFO, - "32/64X address mismatch in %s: 0x%8.8X/0x%8.8X%8.8X, using 32", - fadt_info_table[i].name, address32, - ACPI_FORMAT_UINT64(address64->address))); + (address64->address != (u64)address32)) { + ACPI_BIOS_ERROR((AE_INFO, + "32/64X address mismatch in FADT/%s: " + "0x%8.8X/0x%8.8X%8.8X, using 32", + fadt_info_table[i].name, address32, + ACPI_FORMAT_UINT64(address64-> + address))); } /* Always use 32-bit address if it is valid (non-null) */ @@ -456,7 +474,8 @@ static void acpi_tb_convert_fadt(void) &acpi_gbl_FADT, fadt_info_table [i].length), - (u64) address32); + (u64) address32, + fadt_info_table[i].name); } } } @@ -465,7 +484,7 @@ static void acpi_tb_convert_fadt(void) * * FUNCTION: acpi_tb_validate_fadt * - * PARAMETERS: Table - Pointer to the FADT to be validated + * PARAMETERS: table - Pointer to the FADT to be validated * * RETURN: None * @@ -494,25 +513,25 @@ static void acpi_tb_validate_fadt(void) * DSDT/X_DSDT) would indicate the presence of two FACS or two DSDT tables. */ if (acpi_gbl_FADT.facs && - (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) { - ACPI_WARNING((AE_INFO, - "32/64X FACS address mismatch in FADT - " - "0x%8.8X/0x%8.8X%8.8X, using 32", - acpi_gbl_FADT.facs, - ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs))); + (acpi_gbl_FADT.Xfacs != (u64)acpi_gbl_FADT.facs)) { + ACPI_BIOS_WARNING((AE_INFO, + "32/64X FACS address mismatch in FADT - " + "0x%8.8X/0x%8.8X%8.8X, using 32", + acpi_gbl_FADT.facs, + ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs))); - acpi_gbl_FADT.Xfacs = (u64) acpi_gbl_FADT.facs; + acpi_gbl_FADT.Xfacs = (u64)acpi_gbl_FADT.facs; } if (acpi_gbl_FADT.dsdt && - (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) { - ACPI_WARNING((AE_INFO, - "32/64X DSDT address mismatch in FADT - " - "0x%8.8X/0x%8.8X%8.8X, using 32", - acpi_gbl_FADT.dsdt, - ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt))); + (acpi_gbl_FADT.Xdsdt != (u64)acpi_gbl_FADT.dsdt)) { + ACPI_BIOS_WARNING((AE_INFO, + "32/64X DSDT address mismatch in FADT - " + "0x%8.8X/0x%8.8X%8.8X, using 32", + acpi_gbl_FADT.dsdt, + ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt))); - acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt; + acpi_gbl_FADT.Xdsdt = (u64)acpi_gbl_FADT.dsdt; } /* If Hardware Reduced flag is set, we are all done */ @@ -542,10 +561,10 @@ static void acpi_tb_validate_fadt(void) */ if (address64->address && (address64->bit_width != ACPI_MUL_8(length))) { - ACPI_WARNING((AE_INFO, - "32/64X length mismatch in %s: %u/%u", - name, ACPI_MUL_8(length), - address64->bit_width)); + ACPI_BIOS_WARNING((AE_INFO, + "32/64X length mismatch in FADT/%s: %u/%u", + name, ACPI_MUL_8(length), + address64->bit_width)); } if (fadt_info_table[i].type & ACPI_FADT_REQUIRED) { @@ -554,29 +573,29 @@ static void acpi_tb_validate_fadt(void) * Both the address and length must be non-zero. */ if (!address64->address || !length) { - ACPI_ERROR((AE_INFO, - "Required field %s has zero address and/or length:" - " 0x%8.8X%8.8X/0x%X", - name, - ACPI_FORMAT_UINT64(address64-> - address), - length)); + ACPI_BIOS_ERROR((AE_INFO, + "Required FADT field %s has zero address and/or length: " + "0x%8.8X%8.8X/0x%X", + name, + ACPI_FORMAT_UINT64(address64-> + address), + length)); } } else if (fadt_info_table[i].type & ACPI_FADT_SEPARATE_LENGTH) { /* - * Field is optional (PM2Control, GPE0, GPE1) AND has its own + * Field is optional (Pm2_control, GPE0, GPE1) AND has its own * length field. If present, both the address and length must * be valid. */ if ((address64->address && !length) || (!address64->address && length)) { - ACPI_WARNING((AE_INFO, - "Optional field %s has zero address or length: " - "0x%8.8X%8.8X/0x%X", - name, - ACPI_FORMAT_UINT64(address64-> - address), - length)); + ACPI_BIOS_WARNING((AE_INFO, + "Optional FADT field %s has zero address or length: " + "0x%8.8X%8.8X/0x%X", + name, + ACPI_FORMAT_UINT64 + (address64->address), + length)); } } } @@ -621,12 +640,12 @@ static void acpi_tb_setup_fadt_registers(void) (fadt_info_table[i].default_length > 0) && (fadt_info_table[i].default_length != target64->bit_width)) { - ACPI_WARNING((AE_INFO, - "Invalid length for %s: %u, using default %u", - fadt_info_table[i].name, - target64->bit_width, - fadt_info_table[i]. - default_length)); + ACPI_BIOS_WARNING((AE_INFO, + "Invalid length for FADT/%s: %u, using default %u", + fadt_info_table[i].name, + target64->bit_width, + fadt_info_table[i]. + default_length)); /* Incorrect size, set width to the default */ @@ -670,7 +689,8 @@ static void acpi_tb_setup_fadt_registers(void) source64->address + (fadt_pm_info_table[i]. register_num * - pm1_register_byte_width)); + pm1_register_byte_width), + "PmRegisters"); } } } diff --git a/drivers/acpi/acpica/tbfind.c b/drivers/acpi/acpica/tbfind.c index 4903e36ea75a..57deae166577 100644 --- a/drivers/acpi/acpica/tbfind.c +++ b/drivers/acpi/acpica/tbfind.c @@ -52,7 +52,7 @@ ACPI_MODULE_NAME("tbfind") * * FUNCTION: acpi_tb_find_table * - * PARAMETERS: Signature - String with ACPI table signature + * PARAMETERS: signature - String with ACPI table signature * oem_id - String with the table OEM ID * oem_table_id - String with the OEM Table ID * table_index - Where the table index is returned diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c index c03500b4cc7a..74f97d74db1c 100644 --- a/drivers/acpi/acpica/tbinstal.c +++ b/drivers/acpi/acpica/tbinstal.c @@ -138,13 +138,14 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) if ((table_desc->pointer->signature[0] != 0x00) && (!ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_SSDT)) && (ACPI_STRNCMP(table_desc->pointer->signature, "OEM", 3))) { - ACPI_ERROR((AE_INFO, - "Table has invalid signature [%4.4s] (0x%8.8X), must be SSDT or OEMx", - acpi_ut_valid_acpi_name(*(u32 *)table_desc-> - pointer-> - signature) ? table_desc-> - pointer->signature : "????", - *(u32 *)table_desc->pointer->signature)); + ACPI_BIOS_ERROR((AE_INFO, + "Table has invalid signature [%4.4s] (0x%8.8X), " + "must be SSDT or OEMx", + acpi_ut_valid_acpi_name(*(u32 *)table_desc-> + pointer-> + signature) ? + table_desc->pointer->signature : "????", + *(u32 *)table_desc->pointer->signature)); return_ACPI_STATUS(AE_BAD_SIGNATURE); } @@ -396,10 +397,10 @@ acpi_status acpi_tb_resize_root_table_list(void) * * FUNCTION: acpi_tb_store_table * - * PARAMETERS: Address - Table address - * Table - Table header - * Length - Table length - * Flags - flags + * PARAMETERS: address - Table address + * table - Table header + * length - Table length + * flags - flags * * RETURN: Status and table index. * diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index 0a706cac37de..b6cea30da638 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -178,8 +178,8 @@ u8 acpi_tb_tables_loaded(void) * * FUNCTION: acpi_tb_fix_string * - * PARAMETERS: String - String to be repaired - * Length - Maximum length + * PARAMETERS: string - String to be repaired + * length - Maximum length * * RETURN: None * @@ -205,7 +205,7 @@ static void acpi_tb_fix_string(char *string, acpi_size length) * FUNCTION: acpi_tb_cleanup_table_header * * PARAMETERS: out_header - Where the cleaned header is returned - * Header - Input ACPI table header + * header - Input ACPI table header * * RETURN: Returns the cleaned header in out_header * @@ -231,8 +231,8 @@ acpi_tb_cleanup_table_header(struct acpi_table_header *out_header, * * FUNCTION: acpi_tb_print_table_header * - * PARAMETERS: Address - Table physical address - * Header - Table header + * PARAMETERS: address - Table physical address + * header - Table header * * RETURN: None * @@ -296,8 +296,8 @@ acpi_tb_print_table_header(acpi_physical_address address, * * FUNCTION: acpi_tb_validate_checksum * - * PARAMETERS: Table - ACPI table to verify - * Length - Length of entire table + * PARAMETERS: table - ACPI table to verify + * length - Length of entire table * * RETURN: Status * @@ -317,10 +317,11 @@ acpi_status acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length) /* Checksum ok? (should be zero) */ if (checksum) { - ACPI_WARNING((AE_INFO, - "Incorrect checksum in table [%4.4s] - 0x%2.2X, should be 0x%2.2X", - table->signature, table->checksum, - (u8) (table->checksum - checksum))); + ACPI_BIOS_WARNING((AE_INFO, + "Incorrect checksum in table [%4.4s] - 0x%2.2X, " + "should be 0x%2.2X", + table->signature, table->checksum, + (u8)(table->checksum - checksum))); #if (ACPI_CHECKSUM_ABORT) @@ -335,8 +336,8 @@ acpi_status acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length) * * FUNCTION: acpi_tb_checksum * - * PARAMETERS: Buffer - Pointer to memory region to be checked - * Length - Length of this memory region + * PARAMETERS: buffer - Pointer to memory region to be checked + * length - Length of this memory region * * RETURN: Checksum (u8) * @@ -377,8 +378,9 @@ void acpi_tb_check_dsdt_header(void) if (acpi_gbl_original_dsdt_header.length != acpi_gbl_DSDT->length || acpi_gbl_original_dsdt_header.checksum != acpi_gbl_DSDT->checksum) { - ACPI_ERROR((AE_INFO, - "The DSDT has been corrupted or replaced - old, new headers below")); + ACPI_BIOS_ERROR((AE_INFO, + "The DSDT has been corrupted or replaced - " + "old, new headers below")); acpi_tb_print_table_header(0, &acpi_gbl_original_dsdt_header); acpi_tb_print_table_header(0, acpi_gbl_DSDT); @@ -438,8 +440,8 @@ struct acpi_table_header *acpi_tb_copy_dsdt(u32 table_index) * * FUNCTION: acpi_tb_install_table * - * PARAMETERS: Address - Physical address of DSDT or FACS - * Signature - Table signature, NULL if no need to + * PARAMETERS: address - Physical address of DSDT or FACS + * signature - Table signature, NULL if no need to * match * table_index - Index into root table array * @@ -480,9 +482,10 @@ acpi_tb_install_table(acpi_physical_address address, /* If a particular signature is expected (DSDT/FACS), it must match */ if (signature && !ACPI_COMPARE_NAME(table->signature, signature)) { - ACPI_ERROR((AE_INFO, - "Invalid signature 0x%X for ACPI table, expected [%s]", - *ACPI_CAST_PTR(u32, table->signature), signature)); + ACPI_BIOS_ERROR((AE_INFO, + "Invalid signature 0x%X for ACPI table, expected [%s]", + *ACPI_CAST_PTR(u32, table->signature), + signature)); goto unmap_and_exit; } @@ -589,10 +592,10 @@ acpi_tb_get_root_table_entry(u8 *table_entry, u32 table_entry_size) /* Will truncate 64-bit address to 32 bits, issue warning */ - ACPI_WARNING((AE_INFO, - "64-bit Physical Address in XSDT is too large (0x%8.8X%8.8X)," - " truncating", - ACPI_FORMAT_UINT64(address64))); + ACPI_BIOS_WARNING((AE_INFO, + "64-bit Physical Address in XSDT is too large (0x%8.8X%8.8X)," + " truncating", + ACPI_FORMAT_UINT64(address64))); } #endif return ((acpi_physical_address) (address64)); @@ -603,7 +606,7 @@ acpi_tb_get_root_table_entry(u8 *table_entry, u32 table_entry_size) * * FUNCTION: acpi_tb_parse_root_table * - * PARAMETERS: Rsdp - Pointer to the RSDP + * PARAMETERS: rsdp - Pointer to the RSDP * * RETURN: Status * @@ -694,8 +697,9 @@ acpi_tb_parse_root_table(acpi_physical_address rsdp_address) acpi_os_unmap_memory(table, sizeof(struct acpi_table_header)); if (length < sizeof(struct acpi_table_header)) { - ACPI_ERROR((AE_INFO, "Invalid length 0x%X in RSDT/XSDT", - length)); + ACPI_BIOS_ERROR((AE_INFO, + "Invalid table length 0x%X in RSDT/XSDT", + length)); return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH); } diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c index abcc6412c244..ea4c6d52605a 100644 --- a/drivers/acpi/acpica/tbxface.c +++ b/drivers/acpi/acpica/tbxface.c @@ -1,7 +1,6 @@ /****************************************************************************** * - * Module Name: tbxface - Public interfaces to the ACPI subsystem - * ACPI table oriented interfaces + * Module Name: tbxface - ACPI table oriented external interfaces * *****************************************************************************/ @@ -51,11 +50,6 @@ #define _COMPONENT ACPI_TABLES ACPI_MODULE_NAME("tbxface") -/* Local prototypes */ -static acpi_status acpi_tb_load_namespace(void); - -static int no_auto_ssdt; - /******************************************************************************* * * FUNCTION: acpi_allocate_root_table @@ -65,11 +59,10 @@ static int no_auto_ssdt; * * RETURN: Status * - * DESCRIPTION: Allocate a root table array. Used by i_aSL compiler and + * DESCRIPTION: Allocate a root table array. Used by iASL compiler and * acpi_initialize_tables. * ******************************************************************************/ - acpi_status acpi_allocate_root_table(u32 initial_table_count) { @@ -220,54 +213,12 @@ acpi_status acpi_reallocate_root_table(void) return_ACPI_STATUS(AE_OK); } -/******************************************************************************* - * - * FUNCTION: acpi_load_table - * - * PARAMETERS: table_ptr - pointer to a buffer containing the entire - * table to be loaded - * - * RETURN: Status - * - * DESCRIPTION: This function is called to load a table from the caller's - * buffer. The buffer must contain an entire ACPI Table including - * a valid header. The header fields will be verified, and if it - * is determined that the table is invalid, the call will fail. - * - ******************************************************************************/ -acpi_status acpi_load_table(struct acpi_table_header *table_ptr) -{ - acpi_status status; - u32 table_index; - struct acpi_table_desc table_desc; - - if (!table_ptr) - return AE_BAD_PARAMETER; - - ACPI_MEMSET(&table_desc, 0, sizeof(struct acpi_table_desc)); - table_desc.pointer = table_ptr; - table_desc.length = table_ptr->length; - table_desc.flags = ACPI_TABLE_ORIGIN_UNKNOWN; - - /* - * Install the new table into the local data structures - */ - status = acpi_tb_add_table(&table_desc, &table_index); - if (ACPI_FAILURE(status)) { - return status; - } - status = acpi_ns_load_table(table_index, acpi_gbl_root_node); - return status; -} - -ACPI_EXPORT_SYMBOL(acpi_load_table) - /******************************************************************************* * * FUNCTION: acpi_get_table_header * - * PARAMETERS: Signature - ACPI signature of needed table - * Instance - Which instance (for SSDTs) + * PARAMETERS: signature - ACPI signature of needed table + * instance - Which instance (for SSDTs) * out_table_header - The pointer to the table header to fill * * RETURN: Status and pointer to mapped table header @@ -382,8 +333,8 @@ ACPI_EXPORT_SYMBOL(acpi_unload_table_id) * * FUNCTION: acpi_get_table_with_size * - * PARAMETERS: Signature - ACPI signature of needed table - * Instance - Which instance (for SSDTs) + * PARAMETERS: signature - ACPI signature of needed table + * instance - Which instance (for SSDTs) * out_table - Where the pointer to the table is returned * * RETURN: Status and pointer to table @@ -453,7 +404,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_table) * FUNCTION: acpi_get_table_by_index * * PARAMETERS: table_index - Table index - * Table - Where the pointer to the table is returned + * table - Where the pointer to the table is returned * * RETURN: Status and pointer to the table * @@ -502,157 +453,13 @@ acpi_get_table_by_index(u32 table_index, struct acpi_table_header **table) ACPI_EXPORT_SYMBOL(acpi_get_table_by_index) -/******************************************************************************* - * - * FUNCTION: acpi_tb_load_namespace - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Load the namespace from the DSDT and all SSDTs/PSDTs found in - * the RSDT/XSDT. - * - ******************************************************************************/ -static acpi_status acpi_tb_load_namespace(void) -{ - acpi_status status; - u32 i; - struct acpi_table_header *new_dsdt; - - ACPI_FUNCTION_TRACE(tb_load_namespace); - - (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); - - /* - * Load the namespace. The DSDT is required, but any SSDT and - * PSDT tables are optional. Verify the DSDT. - */ - if (!acpi_gbl_root_table_list.current_table_count || - !ACPI_COMPARE_NAME(& - (acpi_gbl_root_table_list. - tables[ACPI_TABLE_INDEX_DSDT].signature), - ACPI_SIG_DSDT) - || - ACPI_FAILURE(acpi_tb_verify_table - (&acpi_gbl_root_table_list. - tables[ACPI_TABLE_INDEX_DSDT]))) { - status = AE_NO_ACPI_TABLES; - goto unlock_and_exit; - } - - /* - * Save the DSDT pointer for simple access. This is the mapped memory - * address. We must take care here because the address of the .Tables - * array can change dynamically as tables are loaded at run-time. Note: - * .Pointer field is not validated until after call to acpi_tb_verify_table. - */ - acpi_gbl_DSDT = - acpi_gbl_root_table_list.tables[ACPI_TABLE_INDEX_DSDT].pointer; - - /* - * Optionally copy the entire DSDT to local memory (instead of simply - * mapping it.) There are some BIOSs that corrupt or replace the original - * DSDT, creating the need for this option. Default is FALSE, do not copy - * the DSDT. - */ - if (acpi_gbl_copy_dsdt_locally) { - new_dsdt = acpi_tb_copy_dsdt(ACPI_TABLE_INDEX_DSDT); - if (new_dsdt) { - acpi_gbl_DSDT = new_dsdt; - } - } - - /* - * Save the original DSDT header for detection of table corruption - * and/or replacement of the DSDT from outside the OS. - */ - ACPI_MEMCPY(&acpi_gbl_original_dsdt_header, acpi_gbl_DSDT, - sizeof(struct acpi_table_header)); - - (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); - - /* Load and parse tables */ - - status = acpi_ns_load_table(ACPI_TABLE_INDEX_DSDT, acpi_gbl_root_node); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Load any SSDT or PSDT tables. Note: Loop leaves tables locked */ - - (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); - for (i = 0; i < acpi_gbl_root_table_list.current_table_count; ++i) { - if ((!ACPI_COMPARE_NAME - (&(acpi_gbl_root_table_list.tables[i].signature), - ACPI_SIG_SSDT) - && - !ACPI_COMPARE_NAME(& - (acpi_gbl_root_table_list.tables[i]. - signature), ACPI_SIG_PSDT)) - || - ACPI_FAILURE(acpi_tb_verify_table - (&acpi_gbl_root_table_list.tables[i]))) { - continue; - } - - if (no_auto_ssdt) { - printk(KERN_WARNING "ACPI: SSDT ignored due to \"acpi_no_auto_ssdt\"\n"); - continue; - } - - /* Ignore errors while loading tables, get as many as possible */ - - (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); - (void)acpi_ns_load_table(i, acpi_gbl_root_node); - (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); - } - - ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI Tables successfully acquired\n")); - - unlock_and_exit: - (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); - return_ACPI_STATUS(status); -} - -/******************************************************************************* - * - * FUNCTION: acpi_load_tables - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Load the ACPI tables from the RSDT/XSDT - * - ******************************************************************************/ - -acpi_status acpi_load_tables(void) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_load_tables); - - /* Load the namespace from the tables */ - - status = acpi_tb_load_namespace(); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "While loading namespace from ACPI tables")); - } - - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_load_tables) - /******************************************************************************* * * FUNCTION: acpi_install_table_handler * - * PARAMETERS: Handler - Table event handler - * Context - Value passed to the handler on each event + * PARAMETERS: handler - Table event handler + * context - Value passed to the handler on each event * * RETURN: Status * @@ -698,7 +505,7 @@ ACPI_EXPORT_SYMBOL(acpi_install_table_handler) * * FUNCTION: acpi_remove_table_handler * - * PARAMETERS: Handler - Table event handler that was installed + * PARAMETERS: handler - Table event handler that was installed * previously. * * RETURN: Status @@ -734,15 +541,3 @@ acpi_status acpi_remove_table_handler(acpi_tbl_handler handler) } ACPI_EXPORT_SYMBOL(acpi_remove_table_handler) - - -static int __init acpi_no_auto_ssdt_setup(char *s) { - - printk(KERN_NOTICE "ACPI: SSDT auto-load disabled\n"); - - no_auto_ssdt = 1; - - return 1; -} - -__setup("acpi_no_auto_ssdt", acpi_no_auto_ssdt_setup); diff --git a/drivers/acpi/acpica/tbxfload.c b/drivers/acpi/acpica/tbxfload.c new file mode 100644 index 000000000000..f87cc63e69a1 --- /dev/null +++ b/drivers/acpi/acpica/tbxfload.c @@ -0,0 +1,389 @@ +/****************************************************************************** + * + * Module Name: tbxfload - Table load/unload external interfaces + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include +#include "accommon.h" +#include "acnamesp.h" +#include "actables.h" + +#define _COMPONENT ACPI_TABLES +ACPI_MODULE_NAME("tbxfload") + +/* Local prototypes */ +static acpi_status acpi_tb_load_namespace(void); + +static int no_auto_ssdt; + +/******************************************************************************* + * + * FUNCTION: acpi_load_tables + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Load the ACPI tables from the RSDT/XSDT + * + ******************************************************************************/ + +acpi_status acpi_load_tables(void) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_load_tables); + + /* Load the namespace from the tables */ + + status = acpi_tb_load_namespace(); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "While loading namespace from ACPI tables")); + } + + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_load_tables) + +/******************************************************************************* + * + * FUNCTION: acpi_tb_load_namespace + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Load the namespace from the DSDT and all SSDTs/PSDTs found in + * the RSDT/XSDT. + * + ******************************************************************************/ +static acpi_status acpi_tb_load_namespace(void) +{ + acpi_status status; + u32 i; + struct acpi_table_header *new_dsdt; + + ACPI_FUNCTION_TRACE(tb_load_namespace); + + (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); + + /* + * Load the namespace. The DSDT is required, but any SSDT and + * PSDT tables are optional. Verify the DSDT. + */ + if (!acpi_gbl_root_table_list.current_table_count || + !ACPI_COMPARE_NAME(& + (acpi_gbl_root_table_list. + tables[ACPI_TABLE_INDEX_DSDT].signature), + ACPI_SIG_DSDT) + || + ACPI_FAILURE(acpi_tb_verify_table + (&acpi_gbl_root_table_list. + tables[ACPI_TABLE_INDEX_DSDT]))) { + status = AE_NO_ACPI_TABLES; + goto unlock_and_exit; + } + + /* + * Save the DSDT pointer for simple access. This is the mapped memory + * address. We must take care here because the address of the .Tables + * array can change dynamically as tables are loaded at run-time. Note: + * .Pointer field is not validated until after call to acpi_tb_verify_table. + */ + acpi_gbl_DSDT = + acpi_gbl_root_table_list.tables[ACPI_TABLE_INDEX_DSDT].pointer; + + /* + * Optionally copy the entire DSDT to local memory (instead of simply + * mapping it.) There are some BIOSs that corrupt or replace the original + * DSDT, creating the need for this option. Default is FALSE, do not copy + * the DSDT. + */ + if (acpi_gbl_copy_dsdt_locally) { + new_dsdt = acpi_tb_copy_dsdt(ACPI_TABLE_INDEX_DSDT); + if (new_dsdt) { + acpi_gbl_DSDT = new_dsdt; + } + } + + /* + * Save the original DSDT header for detection of table corruption + * and/or replacement of the DSDT from outside the OS. + */ + ACPI_MEMCPY(&acpi_gbl_original_dsdt_header, acpi_gbl_DSDT, + sizeof(struct acpi_table_header)); + + (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); + + /* Load and parse tables */ + + status = acpi_ns_load_table(ACPI_TABLE_INDEX_DSDT, acpi_gbl_root_node); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Load any SSDT or PSDT tables. Note: Loop leaves tables locked */ + + (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); + for (i = 0; i < acpi_gbl_root_table_list.current_table_count; ++i) { + if ((!ACPI_COMPARE_NAME + (&(acpi_gbl_root_table_list.tables[i].signature), + ACPI_SIG_SSDT) + && + !ACPI_COMPARE_NAME(& + (acpi_gbl_root_table_list.tables[i]. + signature), ACPI_SIG_PSDT)) + || + ACPI_FAILURE(acpi_tb_verify_table + (&acpi_gbl_root_table_list.tables[i]))) { + continue; + } + + if (no_auto_ssdt) { + printk(KERN_WARNING "ACPI: SSDT ignored due to \"acpi_no_auto_ssdt\"\n"); + continue; + } + + /* Ignore errors while loading tables, get as many as possible */ + + (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); + (void)acpi_ns_load_table(i, acpi_gbl_root_node); + (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); + } + + ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI Tables successfully acquired\n")); + + unlock_and_exit: + (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_load_table + * + * PARAMETERS: table - Pointer to a buffer containing the ACPI + * table to be loaded. + * + * RETURN: Status + * + * DESCRIPTION: Dynamically load an ACPI table from the caller's buffer. Must + * be a valid ACPI table with a valid ACPI table header. + * Note1: Mainly intended to support hotplug addition of SSDTs. + * Note2: Does not copy the incoming table. User is reponsible + * to ensure that the table is not deleted or unmapped. + * + ******************************************************************************/ + +acpi_status acpi_load_table(struct acpi_table_header *table) +{ + acpi_status status; + struct acpi_table_desc table_desc; + u32 table_index; + + ACPI_FUNCTION_TRACE(acpi_load_table); + + /* Parameter validation */ + + if (!table) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + /* Init local table descriptor */ + + ACPI_MEMSET(&table_desc, 0, sizeof(struct acpi_table_desc)); + table_desc.address = ACPI_PTR_TO_PHYSADDR(table); + table_desc.pointer = table; + table_desc.length = table->length; + table_desc.flags = ACPI_TABLE_ORIGIN_UNKNOWN; + + /* Must acquire the interpreter lock during this operation */ + + status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Install the table and load it into the namespace */ + + ACPI_INFO((AE_INFO, "Host-directed Dynamic ACPI Table Load:")); + status = acpi_tb_add_table(&table_desc, &table_index); + if (ACPI_FAILURE(status)) { + goto unlock_and_exit; + } + + status = acpi_ns_load_table(table_index, acpi_gbl_root_node); + + /* Invoke table handler if present */ + + if (acpi_gbl_table_handler) { + (void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_LOAD, table, + acpi_gbl_table_handler_context); + } + + unlock_and_exit: + (void)acpi_ut_release_mutex(ACPI_MTX_INTERPRETER); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_load_table) + +/******************************************************************************* + * + * FUNCTION: acpi_unload_parent_table + * + * PARAMETERS: object - Handle to any namespace object owned by + * the table to be unloaded + * + * RETURN: Status + * + * DESCRIPTION: Via any namespace object within an SSDT or OEMx table, unloads + * the table and deletes all namespace objects associated with + * that table. Unloading of the DSDT is not allowed. + * Note: Mainly intended to support hotplug removal of SSDTs. + * + ******************************************************************************/ +acpi_status acpi_unload_parent_table(acpi_handle object) +{ + struct acpi_namespace_node *node = + ACPI_CAST_PTR(struct acpi_namespace_node, object); + acpi_status status = AE_NOT_EXIST; + acpi_owner_id owner_id; + u32 i; + + ACPI_FUNCTION_TRACE(acpi_unload_parent_table); + + /* Parameter validation */ + + if (!object) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + /* + * The node owner_id is currently the same as the parent table ID. + * However, this could change in the future. + */ + owner_id = node->owner_id; + if (!owner_id) { + + /* owner_id==0 means DSDT is the owner. DSDT cannot be unloaded */ + + return_ACPI_STATUS(AE_TYPE); + } + + /* Must acquire the interpreter lock during this operation */ + + status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Find the table in the global table list */ + + for (i = 0; i < acpi_gbl_root_table_list.current_table_count; i++) { + if (owner_id != acpi_gbl_root_table_list.tables[i].owner_id) { + continue; + } + + /* + * Allow unload of SSDT and OEMx tables only. Do not allow unload + * of the DSDT. No other types of tables should get here, since + * only these types can contain AML and thus are the only types + * that can create namespace objects. + */ + if (ACPI_COMPARE_NAME + (acpi_gbl_root_table_list.tables[i].signature.ascii, + ACPI_SIG_DSDT)) { + status = AE_TYPE; + break; + } + + /* Ensure the table is actually loaded */ + + if (!acpi_tb_is_table_loaded(i)) { + status = AE_NOT_EXIST; + break; + } + + /* Invoke table handler if present */ + + if (acpi_gbl_table_handler) { + (void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_UNLOAD, + acpi_gbl_root_table_list. + tables[i].pointer, + acpi_gbl_table_handler_context); + } + + /* + * Delete all namespace objects owned by this table. Note that + * these objects can appear anywhere in the namespace by virtue + * of the AML "Scope" operator. Thus, we need to track ownership + * by an ID, not simply a position within the hierarchy. + */ + status = acpi_tb_delete_namespace_by_owner(i); + if (ACPI_FAILURE(status)) { + break; + } + + status = acpi_tb_release_owner_id(i); + acpi_tb_set_table_loaded_flag(i, FALSE); + break; + } + + (void)acpi_ut_release_mutex(ACPI_MTX_INTERPRETER); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_unload_parent_table) + +static int __init acpi_no_auto_ssdt_setup(char *s) { + + printk(KERN_NOTICE "ACPI: SSDT auto-load disabled\n"); + + no_auto_ssdt = 1; + + return 1; +} + +__setup("acpi_no_auto_ssdt", acpi_no_auto_ssdt_setup); diff --git a/drivers/acpi/acpica/tbxfroot.c b/drivers/acpi/acpica/tbxfroot.c index 4258f647ca3d..74e720800037 100644 --- a/drivers/acpi/acpica/tbxfroot.c +++ b/drivers/acpi/acpica/tbxfroot.c @@ -57,7 +57,7 @@ static acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp); * * FUNCTION: acpi_tb_validate_rsdp * - * PARAMETERS: Rsdp - Pointer to unvalidated RSDP + * PARAMETERS: rsdp - Pointer to unvalidated RSDP * * RETURN: Status * @@ -107,10 +107,10 @@ static acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp) * * RETURN: Status, RSDP physical address * - * DESCRIPTION: Search lower 1_mbyte of memory for the root system descriptor + * DESCRIPTION: Search lower 1Mbyte of memory for the root system descriptor * pointer structure. If it is found, set *RSDP to point to it. * - * NOTE1: The RSDP must be either in the first 1_k of the Extended + * NOTE1: The RSDP must be either in the first 1K of the Extended * BIOS Data Area or between E0000 and FFFFF (From ACPI Spec.) * Only a 32-bit physical address is necessary. * @@ -152,7 +152,7 @@ acpi_status acpi_find_root_pointer(acpi_size *table_address) if (physical_address > 0x400) { /* * 1b) Search EBDA paragraphs (EBDA is required to be a - * minimum of 1_k length) + * minimum of 1K length) */ table_ptr = acpi_os_map_memory((acpi_physical_address) physical_address, @@ -216,7 +216,7 @@ acpi_status acpi_find_root_pointer(acpi_size *table_address) /* A valid RSDP was not found */ - ACPI_ERROR((AE_INFO, "A valid RSDP was not found")); + ACPI_BIOS_ERROR((AE_INFO, "A valid RSDP was not found")); return_ACPI_STATUS(AE_NOT_FOUND); } @@ -225,7 +225,7 @@ acpi_status acpi_find_root_pointer(acpi_size *table_address) * FUNCTION: acpi_tb_scan_memory_for_rsdp * * PARAMETERS: start_address - Starting pointer for search - * Length - Maximum length to search + * length - Maximum length to search * * RETURN: Pointer to the RSDP if found, otherwise NULL. * diff --git a/drivers/acpi/acpica/utaddress.c b/drivers/acpi/acpica/utaddress.c index 67932aebe6dd..64880306133d 100644 --- a/drivers/acpi/acpica/utaddress.c +++ b/drivers/acpi/acpica/utaddress.c @@ -53,8 +53,8 @@ ACPI_MODULE_NAME("utaddress") * FUNCTION: acpi_ut_add_address_range * * PARAMETERS: space_id - Address space ID - * Address - op_region start address - * Length - op_region length + * address - op_region start address + * length - op_region length * region_node - op_region namespace node * * RETURN: Status @@ -186,9 +186,9 @@ acpi_ut_remove_address_range(acpi_adr_space_type space_id, * FUNCTION: acpi_ut_check_address_range * * PARAMETERS: space_id - Address space ID - * Address - Start address - * Length - Length of address range - * Warn - TRUE if warning on overlap desired + * address - Start address + * length - Length of address range + * warn - TRUE if warning on overlap desired * * RETURN: Count of the number of conflicts detected. Zero is always * returned for Space IDs other than Memory or I/O. diff --git a/drivers/acpi/acpica/utalloc.c b/drivers/acpi/acpica/utalloc.c index 9982d2ea66fb..ed29d474095e 100644 --- a/drivers/acpi/acpica/utalloc.c +++ b/drivers/acpi/acpica/utalloc.c @@ -189,7 +189,7 @@ acpi_status acpi_ut_delete_caches(void) * * FUNCTION: acpi_ut_validate_buffer * - * PARAMETERS: Buffer - Buffer descriptor to be validated + * PARAMETERS: buffer - Buffer descriptor to be validated * * RETURN: Status * @@ -227,7 +227,7 @@ acpi_status acpi_ut_validate_buffer(struct acpi_buffer * buffer) * * FUNCTION: acpi_ut_initialize_buffer * - * PARAMETERS: Buffer - Buffer to be validated + * PARAMETERS: buffer - Buffer to be validated * required_length - Length needed * * RETURN: Status @@ -308,10 +308,10 @@ acpi_ut_initialize_buffer(struct acpi_buffer * buffer, * * FUNCTION: acpi_ut_allocate * - * PARAMETERS: Size - Size of the allocation - * Component - Component type of caller - * Module - Source file name of caller - * Line - Line number of caller + * PARAMETERS: size - Size of the allocation + * component - Component type of caller + * module - Source file name of caller + * line - Line number of caller * * RETURN: Address of the allocated memory on success, NULL on failure. * @@ -352,10 +352,10 @@ void *acpi_ut_allocate(acpi_size size, * * FUNCTION: acpi_ut_allocate_zeroed * - * PARAMETERS: Size - Size of the allocation - * Component - Component type of caller - * Module - Source file name of caller - * Line - Line number of caller + * PARAMETERS: size - Size of the allocation + * component - Component type of caller + * module - Source file name of caller + * line - Line number of caller * * RETURN: Address of the allocated memory on success, NULL on failure. * diff --git a/drivers/acpi/acpica/utcopy.c b/drivers/acpi/acpica/utcopy.c index 3317c0a406ee..294692ae76e9 100644 --- a/drivers/acpi/acpica/utcopy.c +++ b/drivers/acpi/acpica/utcopy.c @@ -317,7 +317,7 @@ acpi_ut_copy_ielement_to_eelement(u8 object_type, * FUNCTION: acpi_ut_copy_ipackage_to_epackage * * PARAMETERS: internal_object - Pointer to the object we are returning - * Buffer - Where the object is returned + * buffer - Where the object is returned * space_used - Where the object length is returned * * RETURN: Status diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c index a0998a886318..e810894149ae 100644 --- a/drivers/acpi/acpica/utdebug.c +++ b/drivers/acpi/acpica/utdebug.c @@ -145,7 +145,7 @@ static const char *acpi_ut_trim_function_name(const char *function_name) * function_name - Caller's procedure name * module_name - Caller's module name * component_id - Caller's component ID - * Format - Printf format field + * format - Printf format field * ... - Optional printf arguments * * RETURN: None @@ -217,7 +217,7 @@ ACPI_EXPORT_SYMBOL(acpi_debug_print) * function_name - Caller's procedure name * module_name - Caller's module name * component_id - Caller's component ID - * Format - Printf format field + * format - Printf format field * ... - Optional printf arguments * * RETURN: None @@ -286,7 +286,7 @@ ACPI_EXPORT_SYMBOL(acpi_ut_trace) * function_name - Caller's procedure name * module_name - Caller's module name * component_id - Caller's component ID - * Pointer - Pointer to display + * pointer - Pointer to display * * RETURN: None * @@ -315,7 +315,7 @@ acpi_ut_trace_ptr(u32 line_number, * function_name - Caller's procedure name * module_name - Caller's module name * component_id - Caller's component ID - * String - Additional string to display + * string - Additional string to display * * RETURN: None * @@ -346,7 +346,7 @@ acpi_ut_trace_str(u32 line_number, * function_name - Caller's procedure name * module_name - Caller's module name * component_id - Caller's component ID - * Integer - Integer to display + * integer - Integer to display * * RETURN: None * @@ -408,7 +408,7 @@ ACPI_EXPORT_SYMBOL(acpi_ut_exit) * function_name - Caller's procedure name * module_name - Caller's module name * component_id - Caller's component ID - * Status - Exit status code + * status - Exit status code * * RETURN: None * @@ -449,7 +449,7 @@ ACPI_EXPORT_SYMBOL(acpi_ut_status_exit) * function_name - Caller's procedure name * module_name - Caller's module name * component_id - Caller's component ID - * Value - Value to be printed with exit msg + * value - Value to be printed with exit msg * * RETURN: None * @@ -481,7 +481,7 @@ ACPI_EXPORT_SYMBOL(acpi_ut_value_exit) * function_name - Caller's procedure name * module_name - Caller's module name * component_id - Caller's component ID - * Ptr - Pointer to display + * ptr - Pointer to display * * RETURN: None * @@ -508,10 +508,10 @@ acpi_ut_ptr_exit(u32 line_number, * * FUNCTION: acpi_ut_dump_buffer * - * PARAMETERS: Buffer - Buffer to dump - * Count - Amount to dump, in bytes - * Display - BYTE, WORD, DWORD, or QWORD display - * component_iD - Caller's component ID + * PARAMETERS: buffer - Buffer to dump + * count - Amount to dump, in bytes + * display - BYTE, WORD, DWORD, or QWORD display + * component_ID - Caller's component ID * * RETURN: None * @@ -625,10 +625,10 @@ void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display) * * FUNCTION: acpi_ut_dump_buffer * - * PARAMETERS: Buffer - Buffer to dump - * Count - Amount to dump, in bytes - * Display - BYTE, WORD, DWORD, or QWORD display - * component_iD - Caller's component ID + * PARAMETERS: buffer - Buffer to dump + * count - Amount to dump, in bytes + * display - BYTE, WORD, DWORD, or QWORD display + * component_ID - Caller's component ID * * RETURN: None * diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c index 684849949bf3..60a158472d82 100644 --- a/drivers/acpi/acpica/utdecode.c +++ b/drivers/acpi/acpica/utdecode.c @@ -49,41 +49,6 @@ #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utdecode") -/******************************************************************************* - * - * FUNCTION: acpi_format_exception - * - * PARAMETERS: Status - The acpi_status code to be formatted - * - * RETURN: A string containing the exception text. A valid pointer is - * always returned. - * - * DESCRIPTION: This function translates an ACPI exception into an ASCII string - * It is here instead of utxface.c so it is always present. - * - ******************************************************************************/ -const char *acpi_format_exception(acpi_status status) -{ - const char *exception = NULL; - - ACPI_FUNCTION_ENTRY(); - - exception = acpi_ut_validate_exception(status); - if (!exception) { - - /* Exception code was not recognized */ - - ACPI_ERROR((AE_INFO, - "Unknown exception code: 0x%8.8X", status)); - - exception = "UNKNOWN_STATUS_CODE"; - } - - return (ACPI_CAST_PTR(const char, exception)); -} - -ACPI_EXPORT_SYMBOL(acpi_format_exception) - /* * Properties of the ACPI Object Types, both internal and external. * The table is indexed by values of acpi_object_type @@ -126,8 +91,8 @@ const u8 acpi_gbl_ns_properties[ACPI_NUM_NS_TYPES] = { * * FUNCTION: acpi_ut_hex_to_ascii_char * - * PARAMETERS: Integer - Contains the hex digit - * Position - bit position of the digit within the + * PARAMETERS: integer - Contains the hex digit + * position - bit position of the digit within the * integer (multiple of 4) * * RETURN: The converted Ascii character @@ -164,16 +129,17 @@ char acpi_ut_hex_to_ascii_char(u64 integer, u32 position) /* Region type decoding */ const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS] = { - "SystemMemory", - "SystemIO", - "PCI_Config", - "EmbeddedControl", - "SMBus", - "SystemCMOS", - "PCIBARTarget", - "IPMI", - "GeneralPurposeIo", - "GenericSerialBus" + "SystemMemory", /* 0x00 */ + "SystemIO", /* 0x01 */ + "PCI_Config", /* 0x02 */ + "EmbeddedControl", /* 0x03 */ + "SMBus", /* 0x04 */ + "SystemCMOS", /* 0x05 */ + "PCIBARTarget", /* 0x06 */ + "IPMI", /* 0x07 */ + "GeneralPurposeIo", /* 0x08 */ + "GenericSerialBus", /* 0x09 */ + "PCC" /* 0x0A */ }; char *acpi_ut_get_region_name(u8 space_id) @@ -228,7 +194,7 @@ char *acpi_ut_get_event_name(u32 event_id) * * FUNCTION: acpi_ut_get_type_name * - * PARAMETERS: Type - An ACPI object type + * PARAMETERS: type - An ACPI object type * * RETURN: Decoded ACPI object type name * @@ -306,7 +272,7 @@ char *acpi_ut_get_object_type_name(union acpi_operand_object *obj_desc) * * FUNCTION: acpi_ut_get_node_name * - * PARAMETERS: Object - A namespace node + * PARAMETERS: object - A namespace node * * RETURN: ASCII name of the node * @@ -351,7 +317,7 @@ char *acpi_ut_get_node_name(void *object) * * FUNCTION: acpi_ut_get_descriptor_name * - * PARAMETERS: Object - An ACPI object + * PARAMETERS: object - An ACPI object * * RETURN: Decoded name of the descriptor type * @@ -401,7 +367,7 @@ char *acpi_ut_get_descriptor_name(void *object) * * FUNCTION: acpi_ut_get_reference_name * - * PARAMETERS: Object - An ACPI reference object + * PARAMETERS: object - An ACPI reference object * * RETURN: Decoded name of the type of reference * @@ -532,7 +498,7 @@ const char *acpi_ut_get_notify_name(u32 notify_value) * * FUNCTION: acpi_ut_valid_object_type * - * PARAMETERS: Type - Object type to be validated + * PARAMETERS: type - Object type to be validated * * RETURN: TRUE if valid object type, FALSE otherwise * diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c index 2a6c3e183697..798105443d0f 100644 --- a/drivers/acpi/acpica/utdelete.c +++ b/drivers/acpi/acpica/utdelete.c @@ -60,7 +60,7 @@ acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action); * * FUNCTION: acpi_ut_delete_internal_obj * - * PARAMETERS: Object - Object to be deleted + * PARAMETERS: object - Object to be deleted * * RETURN: None * @@ -152,7 +152,7 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object) case ACPI_TYPE_PROCESSOR: case ACPI_TYPE_THERMAL: - /* Walk the notify handler list for this object */ + /* Walk the address handler list for this object */ handler_desc = object->common_notify.handler; while (handler_desc) { @@ -358,8 +358,8 @@ void acpi_ut_delete_internal_object_list(union acpi_operand_object **obj_list) * * FUNCTION: acpi_ut_update_ref_count * - * PARAMETERS: Object - Object whose ref count is to be updated - * Action - What to do + * PARAMETERS: object - Object whose ref count is to be updated + * action - What to do * * RETURN: New ref count * @@ -456,9 +456,9 @@ acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action) * * FUNCTION: acpi_ut_update_object_reference * - * PARAMETERS: Object - Increment ref count for this object + * PARAMETERS: object - Increment ref count for this object * and all sub-objects - * Action - Either REF_INCREMENT or REF_DECREMENT or + * action - Either REF_INCREMENT or REF_DECREMENT or * REF_FORCE_DELETE * * RETURN: Status @@ -480,6 +480,7 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action) acpi_status status = AE_OK; union acpi_generic_state *state_list = NULL; union acpi_operand_object *next_object = NULL; + union acpi_operand_object *prev_object; union acpi_generic_state *state; u32 i; @@ -505,12 +506,21 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action) case ACPI_TYPE_POWER: case ACPI_TYPE_THERMAL: - /* Update the notify objects for these types (if present) */ - - acpi_ut_update_ref_count(object->common_notify. - system_notify, action); - acpi_ut_update_ref_count(object->common_notify. - device_notify, action); + /* + * Update the notify objects for these types (if present) + * Two lists, system and device notify handlers. + */ + for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) { + prev_object = + object->common_notify.notify_list[i]; + while (prev_object) { + next_object = + prev_object->notify.next[i]; + acpi_ut_update_ref_count(prev_object, + action); + prev_object = next_object; + } + } break; case ACPI_TYPE_PACKAGE: @@ -630,7 +640,7 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action) * * FUNCTION: acpi_ut_add_reference * - * PARAMETERS: Object - Object whose reference count is to be + * PARAMETERS: object - Object whose reference count is to be * incremented * * RETURN: None @@ -664,7 +674,7 @@ void acpi_ut_add_reference(union acpi_operand_object *object) * * FUNCTION: acpi_ut_remove_reference * - * PARAMETERS: Object - Object whose ref count will be decremented + * PARAMETERS: object - Object whose ref count will be decremented * * RETURN: None * diff --git a/drivers/acpi/acpica/uteval.c b/drivers/acpi/acpica/uteval.c index 479f32b33415..a9c65fbea5f4 100644 --- a/drivers/acpi/acpica/uteval.c +++ b/drivers/acpi/acpica/uteval.c @@ -53,7 +53,7 @@ ACPI_MODULE_NAME("uteval") * FUNCTION: acpi_ut_evaluate_object * * PARAMETERS: prefix_node - Starting node - * Path - Path to object from starting node + * path - Path to object from starting node * expected_return_types - Bitmap of allowed return types * return_desc - Where a return value is stored * @@ -187,7 +187,7 @@ acpi_ut_evaluate_object(struct acpi_namespace_node *prefix_node, * * PARAMETERS: object_name - Object name to be evaluated * device_node - Node for the device - * Value - Where the value is returned + * value - Where the value is returned * * RETURN: Status * @@ -229,7 +229,7 @@ acpi_ut_evaluate_numeric_object(char *object_name, * FUNCTION: acpi_ut_execute_STA * * PARAMETERS: device_node - Node for the device - * Flags - Where the status flags are returned + * flags - Where the status flags are returned * * RETURN: Status * diff --git a/drivers/acpi/acpica/utexcep.c b/drivers/acpi/acpica/utexcep.c new file mode 100644 index 000000000000..23b98945f6b7 --- /dev/null +++ b/drivers/acpi/acpica/utexcep.c @@ -0,0 +1,153 @@ +/******************************************************************************* + * + * Module Name: utexcep - Exception code support + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#define ACPI_DEFINE_EXCEPTION_TABLE +#include +#include +#include "accommon.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("utexcep") + +/******************************************************************************* + * + * FUNCTION: acpi_format_exception + * + * PARAMETERS: status - The acpi_status code to be formatted + * + * RETURN: A string containing the exception text. A valid pointer is + * always returned. + * + * DESCRIPTION: This function translates an ACPI exception into an ASCII + * string. Returns "unknown status" string for invalid codes. + * + ******************************************************************************/ +const char *acpi_format_exception(acpi_status status) +{ + const char *exception = NULL; + + ACPI_FUNCTION_ENTRY(); + + exception = acpi_ut_validate_exception(status); + if (!exception) { + + /* Exception code was not recognized */ + + ACPI_ERROR((AE_INFO, + "Unknown exception code: 0x%8.8X", status)); + + exception = "UNKNOWN_STATUS_CODE"; + } + + return (ACPI_CAST_PTR(const char, exception)); +} + +ACPI_EXPORT_SYMBOL(acpi_format_exception) + +/******************************************************************************* + * + * FUNCTION: acpi_ut_validate_exception + * + * PARAMETERS: status - The acpi_status code to be formatted + * + * RETURN: A string containing the exception text. NULL if exception is + * not valid. + * + * DESCRIPTION: This function validates and translates an ACPI exception into + * an ASCII string. + * + ******************************************************************************/ +const char *acpi_ut_validate_exception(acpi_status status) +{ + u32 sub_status; + const char *exception = NULL; + + ACPI_FUNCTION_ENTRY(); + + /* + * Status is composed of two parts, a "type" and an actual code + */ + sub_status = (status & ~AE_CODE_MASK); + + switch (status & AE_CODE_MASK) { + case AE_CODE_ENVIRONMENTAL: + + if (sub_status <= AE_CODE_ENV_MAX) { + exception = acpi_gbl_exception_names_env[sub_status]; + } + break; + + case AE_CODE_PROGRAMMER: + + if (sub_status <= AE_CODE_PGM_MAX) { + exception = acpi_gbl_exception_names_pgm[sub_status]; + } + break; + + case AE_CODE_ACPI_TABLES: + + if (sub_status <= AE_CODE_TBL_MAX) { + exception = acpi_gbl_exception_names_tbl[sub_status]; + } + break; + + case AE_CODE_AML: + + if (sub_status <= AE_CODE_AML_MAX) { + exception = acpi_gbl_exception_names_aml[sub_status]; + } + break; + + case AE_CODE_CONTROL: + + if (sub_status <= AE_CODE_CTRL_MAX) { + exception = acpi_gbl_exception_names_ctrl[sub_status]; + } + break; + + default: + break; + } + + return (ACPI_CAST_PTR(const char, exception)); +} diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c index 90f53b42eca9..ed1893155f8b 100644 --- a/drivers/acpi/acpica/utglobal.c +++ b/drivers/acpi/acpica/utglobal.c @@ -247,8 +247,9 @@ struct acpi_fixed_event_info acpi_gbl_fixed_event_info[ACPI_NUM_FIXED_EVENTS] = * * RETURN: Status * - * DESCRIPTION: Init library globals. All globals that require specific - * initialization should be initialized here! + * DESCRIPTION: Initialize ACPICA globals. All globals that require specific + * initialization should be initialized here. This allows for + * a warm restart. * ******************************************************************************/ @@ -284,7 +285,7 @@ acpi_status acpi_ut_init_globals(void) acpi_gbl_owner_id_mask[i] = 0; } - /* Last owner_iD is never valid */ + /* Last owner_ID is never valid */ acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS - 1] = 0x80000000; @@ -304,8 +305,8 @@ acpi_status acpi_ut_init_globals(void) /* Global handlers */ - acpi_gbl_system_notify.handler = NULL; - acpi_gbl_device_notify.handler = NULL; + acpi_gbl_global_notify[0].handler = NULL; + acpi_gbl_global_notify[1].handler = NULL; acpi_gbl_exception_handler = NULL; acpi_gbl_init_handler = NULL; acpi_gbl_table_handler = NULL; diff --git a/drivers/acpi/acpica/utids.c b/drivers/acpi/acpica/utids.c index c92eb1d93785..5d84e1954575 100644 --- a/drivers/acpi/acpica/utids.c +++ b/drivers/acpi/acpica/utids.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Module Name: utids - support for device IDs - HID, UID, CID + * Module Name: utids - support for device Ids - HID, UID, CID * *****************************************************************************/ diff --git a/drivers/acpi/acpica/utlock.c b/drivers/acpi/acpica/utlock.c index 155fd786d0f2..b1eb7f17e110 100644 --- a/drivers/acpi/acpica/utlock.c +++ b/drivers/acpi/acpica/utlock.c @@ -52,7 +52,7 @@ ACPI_MODULE_NAME("utlock") * FUNCTION: acpi_ut_create_rw_lock * acpi_ut_delete_rw_lock * - * PARAMETERS: Lock - Pointer to a valid RW lock + * PARAMETERS: lock - Pointer to a valid RW lock * * RETURN: Status * @@ -89,7 +89,7 @@ void acpi_ut_delete_rw_lock(struct acpi_rw_lock *lock) * FUNCTION: acpi_ut_acquire_read_lock * acpi_ut_release_read_lock * - * PARAMETERS: Lock - Pointer to a valid RW lock + * PARAMETERS: lock - Pointer to a valid RW lock * * RETURN: Status * @@ -149,7 +149,7 @@ acpi_status acpi_ut_release_read_lock(struct acpi_rw_lock *lock) * FUNCTION: acpi_ut_acquire_write_lock * acpi_ut_release_write_lock * - * PARAMETERS: Lock - Pointer to a valid RW lock + * PARAMETERS: lock - Pointer to a valid RW lock * * RETURN: Status * diff --git a/drivers/acpi/acpica/utmath.c b/drivers/acpi/acpica/utmath.c index 2491a552b0e6..d88a8aaab2a6 100644 --- a/drivers/acpi/acpica/utmath.c +++ b/drivers/acpi/acpica/utmath.c @@ -73,8 +73,8 @@ typedef union uint64_overlay { * * FUNCTION: acpi_ut_short_divide * - * PARAMETERS: Dividend - 64-bit dividend - * Divisor - 32-bit divisor + * PARAMETERS: dividend - 64-bit dividend + * divisor - 32-bit divisor * out_quotient - Pointer to where the quotient is returned * out_remainder - Pointer to where the remainder is returned * diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c index 86f19db74e05..33c6cf7ff467 100644 --- a/drivers/acpi/acpica/utmisc.c +++ b/drivers/acpi/acpica/utmisc.c @@ -50,79 +50,41 @@ #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utmisc") +#if defined ACPI_ASL_COMPILER || defined ACPI_EXEC_APP /******************************************************************************* * - * FUNCTION: acpi_ut_validate_exception + * FUNCTION: ut_convert_backslashes * - * PARAMETERS: Status - The acpi_status code to be formatted + * PARAMETERS: pathname - File pathname string to be converted * - * RETURN: A string containing the exception text. NULL if exception is - * not valid. + * RETURN: Modifies the input Pathname * - * DESCRIPTION: This function validates and translates an ACPI exception into - * an ASCII string. + * DESCRIPTION: Convert all backslashes (0x5C) to forward slashes (0x2F) within + * the entire input file pathname string. * ******************************************************************************/ -const char *acpi_ut_validate_exception(acpi_status status) +void ut_convert_backslashes(char *pathname) { - u32 sub_status; - const char *exception = NULL; - ACPI_FUNCTION_ENTRY(); - - /* - * Status is composed of two parts, a "type" and an actual code - */ - sub_status = (status & ~AE_CODE_MASK); - - switch (status & AE_CODE_MASK) { - case AE_CODE_ENVIRONMENTAL: - - if (sub_status <= AE_CODE_ENV_MAX) { - exception = acpi_gbl_exception_names_env[sub_status]; - } - break; - - case AE_CODE_PROGRAMMER: - - if (sub_status <= AE_CODE_PGM_MAX) { - exception = acpi_gbl_exception_names_pgm[sub_status]; - } - break; - - case AE_CODE_ACPI_TABLES: - - if (sub_status <= AE_CODE_TBL_MAX) { - exception = acpi_gbl_exception_names_tbl[sub_status]; - } - break; - - case AE_CODE_AML: - - if (sub_status <= AE_CODE_AML_MAX) { - exception = acpi_gbl_exception_names_aml[sub_status]; - } - break; - - case AE_CODE_CONTROL: - - if (sub_status <= AE_CODE_CTRL_MAX) { - exception = acpi_gbl_exception_names_ctrl[sub_status]; - } - break; - - default: - break; + if (!pathname) { + return; } - return (ACPI_CAST_PTR(const char, exception)); + while (*pathname) { + if (*pathname == '\\') { + *pathname = '/'; + } + + pathname++; + } } +#endif /******************************************************************************* * * FUNCTION: acpi_ut_is_pci_root_bridge * - * PARAMETERS: Id - The HID/CID in string format + * PARAMETERS: id - The HID/CID in string format * * RETURN: TRUE if the Id is a match for a PCI/PCI-Express Root Bridge * @@ -150,7 +112,7 @@ u8 acpi_ut_is_pci_root_bridge(char *id) * * FUNCTION: acpi_ut_is_aml_table * - * PARAMETERS: Table - An ACPI table + * PARAMETERS: table - An ACPI table * * RETURN: TRUE if table contains executable AML; FALSE otherwise * @@ -284,7 +246,7 @@ acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id) * * FUNCTION: acpi_ut_release_owner_id * - * PARAMETERS: owner_id_ptr - Pointer to a previously allocated owner_iD + * PARAMETERS: owner_id_ptr - Pointer to a previously allocated owner_ID * * RETURN: None. No error is returned because we are either exiting a * control method or unloading a table. Either way, we would @@ -307,7 +269,7 @@ void acpi_ut_release_owner_id(acpi_owner_id * owner_id_ptr) *owner_id_ptr = 0; - /* Zero is not a valid owner_iD */ + /* Zero is not a valid owner_ID */ if (owner_id == 0) { ACPI_ERROR((AE_INFO, "Invalid OwnerId: 0x%2.2X", owner_id)); @@ -381,7 +343,7 @@ void acpi_ut_strupr(char *src_string) * * FUNCTION: acpi_ut_print_string * - * PARAMETERS: String - Null terminated ASCII string + * PARAMETERS: string - Null terminated ASCII string * max_length - Maximum output length * * RETURN: None @@ -467,7 +429,7 @@ void acpi_ut_print_string(char *string, u8 max_length) * * FUNCTION: acpi_ut_dword_byte_swap * - * PARAMETERS: Value - Value to be converted + * PARAMETERS: value - Value to be converted * * RETURN: u32 integer with bytes swapped * @@ -537,9 +499,9 @@ void acpi_ut_set_integer_width(u8 revision) * * FUNCTION: acpi_ut_display_init_pathname * - * PARAMETERS: Type - Object type of the node + * PARAMETERS: type - Object type of the node * obj_handle - Handle whose pathname will be displayed - * Path - Additional path string to be appended. + * path - Additional path string to be appended. * (NULL if no extra path) * * RETURN: acpi_status @@ -604,8 +566,8 @@ acpi_ut_display_init_pathname(u8 type, * * FUNCTION: acpi_ut_valid_acpi_char * - * PARAMETERS: Char - The character to be examined - * Position - Byte position (0-3) + * PARAMETERS: char - The character to be examined + * position - Byte position (0-3) * * RETURN: TRUE if the character is valid, FALSE otherwise * @@ -640,7 +602,7 @@ u8 acpi_ut_valid_acpi_char(char character, u32 position) * * FUNCTION: acpi_ut_valid_acpi_name * - * PARAMETERS: Name - The name to be examined + * PARAMETERS: name - The name to be examined * * RETURN: TRUE if the name is valid, FALSE otherwise * @@ -671,7 +633,7 @@ u8 acpi_ut_valid_acpi_name(u32 name) * * FUNCTION: acpi_ut_repair_name * - * PARAMETERS: Name - The ACPI name to be repaired + * PARAMETERS: name - The ACPI name to be repaired * * RETURN: Repaired version of the name * @@ -705,8 +667,8 @@ acpi_name acpi_ut_repair_name(char *name) * * FUNCTION: acpi_ut_strtoul64 * - * PARAMETERS: String - Null terminated string - * Base - Radix of the string: 16 or ACPI_ANY_BASE; + * PARAMETERS: string - Null terminated string + * base - Radix of the string: 16 or ACPI_ANY_BASE; * ACPI_ANY_BASE means 'in behalf of to_integer' * ret_integer - Where the converted integer is returned * @@ -755,7 +717,7 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer) if (to_integer_op) { /* - * Base equal to ACPI_ANY_BASE means 'to_integer operation case'. + * Base equal to ACPI_ANY_BASE means 'ToInteger operation case'. * We need to determine if it is decimal or hexadecimal. */ if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) { @@ -878,8 +840,8 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer) * * FUNCTION: acpi_ut_create_update_state_and_push * - * PARAMETERS: Object - Object to be added to the new state - * Action - Increment/Decrement + * PARAMETERS: object - Object to be added to the new state + * action - Increment/Decrement * state_list - List the state will be added to * * RETURN: Status @@ -919,7 +881,7 @@ acpi_ut_create_update_state_and_push(union acpi_operand_object *object, * PARAMETERS: source_object - The package to walk * target_object - Target object (if package is being copied) * walk_callback - Called once for each package element - * Context - Passed to the callback function + * context - Passed to the callback function * * RETURN: Status * diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c index 43174df33121..296baa676bc5 100644 --- a/drivers/acpi/acpica/utmutex.c +++ b/drivers/acpi/acpica/utmutex.c @@ -147,7 +147,7 @@ void acpi_ut_mutex_terminate(void) * * FUNCTION: acpi_ut_create_mutex * - * PARAMETERS: mutex_iD - ID of the mutex to be created + * PARAMETERS: mutex_ID - ID of the mutex to be created * * RETURN: Status * @@ -176,7 +176,7 @@ static acpi_status acpi_ut_create_mutex(acpi_mutex_handle mutex_id) * * FUNCTION: acpi_ut_delete_mutex * - * PARAMETERS: mutex_iD - ID of the mutex to be deleted + * PARAMETERS: mutex_ID - ID of the mutex to be deleted * * RETURN: Status * @@ -199,7 +199,7 @@ static void acpi_ut_delete_mutex(acpi_mutex_handle mutex_id) * * FUNCTION: acpi_ut_acquire_mutex * - * PARAMETERS: mutex_iD - ID of the mutex to be acquired + * PARAMETERS: mutex_ID - ID of the mutex to be acquired * * RETURN: Status * @@ -283,7 +283,7 @@ acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id) * * FUNCTION: acpi_ut_release_mutex * - * PARAMETERS: mutex_iD - ID of the mutex to be released + * PARAMETERS: mutex_ID - ID of the mutex to be released * * RETURN: Status * diff --git a/drivers/acpi/acpica/utobject.c b/drivers/acpi/acpica/utobject.c index b112744fc9ae..655f0799a391 100644 --- a/drivers/acpi/acpica/utobject.c +++ b/drivers/acpi/acpica/utobject.c @@ -69,7 +69,7 @@ acpi_ut_get_element_length(u8 object_type, * PARAMETERS: module_name - Source file name of caller * line_number - Line number of caller * component_id - Component type of caller - * Type - ACPI Type of the new object + * type - ACPI Type of the new object * * RETURN: A new internal object, null on failure * @@ -150,7 +150,7 @@ union acpi_operand_object *acpi_ut_create_internal_object_dbg(const char * * FUNCTION: acpi_ut_create_package_object * - * PARAMETERS: Count - Number of package elements + * PARAMETERS: count - Number of package elements * * RETURN: Pointer to a new Package object, null on failure * @@ -323,11 +323,11 @@ union acpi_operand_object *acpi_ut_create_string_object(acpi_size string_size) * * FUNCTION: acpi_ut_valid_internal_object * - * PARAMETERS: Object - Object to be validated + * PARAMETERS: object - Object to be validated * * RETURN: TRUE if object is valid, FALSE otherwise * - * DESCRIPTION: Validate a pointer to be a union acpi_operand_object + * DESCRIPTION: Validate a pointer to be of type union acpi_operand_object * ******************************************************************************/ @@ -348,7 +348,7 @@ u8 acpi_ut_valid_internal_object(void *object) switch (ACPI_GET_DESCRIPTOR_TYPE(object)) { case ACPI_DESC_TYPE_OPERAND: - /* The object appears to be a valid union acpi_operand_object */ + /* The object appears to be a valid union acpi_operand_object */ return (TRUE); @@ -407,7 +407,7 @@ void *acpi_ut_allocate_object_desc_dbg(const char *module_name, * * FUNCTION: acpi_ut_delete_object_desc * - * PARAMETERS: Object - An Acpi internal object to be deleted + * PARAMETERS: object - An Acpi internal object to be deleted * * RETURN: None. * @@ -419,7 +419,7 @@ void acpi_ut_delete_object_desc(union acpi_operand_object *object) { ACPI_FUNCTION_TRACE_PTR(ut_delete_object_desc, object); - /* Object must be a union acpi_operand_object */ + /* Object must be a union acpi_operand_object */ if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND) { ACPI_ERROR((AE_INFO, diff --git a/drivers/acpi/acpica/utosi.c b/drivers/acpi/acpica/utosi.c index 2360cf70c18c..34ef0bd7e4b4 100644 --- a/drivers/acpi/acpica/utosi.c +++ b/drivers/acpi/acpica/utosi.c @@ -68,7 +68,7 @@ static struct acpi_interface_info acpi_default_supported_interfaces[] = { {"Windows 2001.1", NULL, 0, ACPI_OSI_WINSRV_2003}, /* Windows Server 2003 */ {"Windows 2001 SP2", NULL, 0, ACPI_OSI_WIN_XP_SP2}, /* Windows XP SP2 */ {"Windows 2001.1 SP1", NULL, 0, ACPI_OSI_WINSRV_2003_SP1}, /* Windows Server 2003 SP1 - Added 03/2006 */ - {"Windows 2006", NULL, 0, ACPI_OSI_WIN_VISTA}, /* Windows Vista - Added 03/2006 */ + {"Windows 2006", NULL, 0, ACPI_OSI_WIN_VISTA}, /* Windows vista - Added 03/2006 */ {"Windows 2006.1", NULL, 0, ACPI_OSI_WINSRV_2008}, /* Windows Server 2008 - Added 09/2009 */ {"Windows 2006 SP1", NULL, 0, ACPI_OSI_WIN_VISTA_SP1}, /* Windows Vista SP1 - Added 09/2009 */ {"Windows 2006 SP2", NULL, 0, ACPI_OSI_WIN_VISTA_SP2}, /* Windows Vista SP2 - Added 09/2010 */ diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c index 9d441ea70305..e38bef4980bc 100644 --- a/drivers/acpi/acpica/utresrc.c +++ b/drivers/acpi/acpica/utresrc.c @@ -356,13 +356,13 @@ static const u8 acpi_gbl_resource_types[] = { ACPI_SMALL_VARIABLE_LENGTH, /* 06 start_dependent_functions */ ACPI_FIXED_LENGTH, /* 07 end_dependent_functions */ ACPI_FIXED_LENGTH, /* 08 IO */ - ACPI_FIXED_LENGTH, /* 09 fixed_iO */ - ACPI_FIXED_LENGTH, /* 0_a fixed_dMA */ + ACPI_FIXED_LENGTH, /* 09 fixed_IO */ + ACPI_FIXED_LENGTH, /* 0A fixed_DMA */ 0, 0, 0, - ACPI_VARIABLE_LENGTH, /* 0_e vendor_short */ - ACPI_FIXED_LENGTH, /* 0_f end_tag */ + ACPI_VARIABLE_LENGTH, /* 0E vendor_short */ + ACPI_FIXED_LENGTH, /* 0F end_tag */ /* Large descriptors */ @@ -375,16 +375,16 @@ static const u8 acpi_gbl_resource_types[] = { ACPI_FIXED_LENGTH, /* 06 memory32_fixed */ ACPI_VARIABLE_LENGTH, /* 07 Dword* address */ ACPI_VARIABLE_LENGTH, /* 08 Word* address */ - ACPI_VARIABLE_LENGTH, /* 09 extended_iRQ */ - ACPI_VARIABLE_LENGTH, /* 0_a Qword* address */ - ACPI_FIXED_LENGTH, /* 0_b Extended* address */ - ACPI_VARIABLE_LENGTH, /* 0_c Gpio* */ + ACPI_VARIABLE_LENGTH, /* 09 extended_IRQ */ + ACPI_VARIABLE_LENGTH, /* 0A Qword* address */ + ACPI_FIXED_LENGTH, /* 0B Extended* address */ + ACPI_VARIABLE_LENGTH, /* 0C Gpio* */ 0, - ACPI_VARIABLE_LENGTH /* 0_e *serial_bus */ + ACPI_VARIABLE_LENGTH /* 0E *serial_bus */ }; /* - * For the i_aSL compiler/disassembler, we don't want any error messages + * For the iASL compiler/disassembler, we don't want any error messages * because the disassembler uses the resource validation code to determine * if Buffer objects are actually Resource Templates. */ @@ -398,11 +398,11 @@ static const u8 acpi_gbl_resource_types[] = { * * FUNCTION: acpi_ut_walk_aml_resources * - * PARAMETERS: Aml - Pointer to the raw AML resource template + * PARAMETERS: aml - Pointer to the raw AML resource template * aml_length - Length of the entire template * user_function - Called once for each descriptor found. If * NULL, a pointer to the end_tag is returned - * Context - Passed to user_function + * context - Passed to user_function * * RETURN: Status * @@ -513,7 +513,7 @@ acpi_ut_walk_aml_resources(u8 * aml, * * FUNCTION: acpi_ut_validate_resource * - * PARAMETERS: Aml - Pointer to the raw AML resource descriptor + * PARAMETERS: aml - Pointer to the raw AML resource descriptor * return_index - Where the resource index is returned. NULL * if the index is not required. * @@ -664,7 +664,7 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) * * FUNCTION: acpi_ut_get_resource_type * - * PARAMETERS: Aml - Pointer to the raw AML resource descriptor + * PARAMETERS: aml - Pointer to the raw AML resource descriptor * * RETURN: The Resource Type with no extraneous bits (except the * Large/Small descriptor bit -- this is left alone) @@ -698,7 +698,7 @@ u8 acpi_ut_get_resource_type(void *aml) * * FUNCTION: acpi_ut_get_resource_length * - * PARAMETERS: Aml - Pointer to the raw AML resource descriptor + * PARAMETERS: aml - Pointer to the raw AML resource descriptor * * RETURN: Byte Length * @@ -738,7 +738,7 @@ u16 acpi_ut_get_resource_length(void *aml) * * FUNCTION: acpi_ut_get_resource_header_length * - * PARAMETERS: Aml - Pointer to the raw AML resource descriptor + * PARAMETERS: aml - Pointer to the raw AML resource descriptor * * RETURN: Length of the AML header (depends on large/small descriptor) * @@ -763,7 +763,7 @@ u8 acpi_ut_get_resource_header_length(void *aml) * * FUNCTION: acpi_ut_get_descriptor_length * - * PARAMETERS: Aml - Pointer to the raw AML resource descriptor + * PARAMETERS: aml - Pointer to the raw AML resource descriptor * * RETURN: Byte length * diff --git a/drivers/acpi/acpica/utstate.c b/drivers/acpi/acpica/utstate.c index 4267477c2797..a1c988260073 100644 --- a/drivers/acpi/acpica/utstate.c +++ b/drivers/acpi/acpica/utstate.c @@ -51,8 +51,8 @@ ACPI_MODULE_NAME("utstate") * * FUNCTION: acpi_ut_create_pkg_state_and_push * - * PARAMETERS: Object - Object to be added to the new state - * Action - Increment/Decrement + * PARAMETERS: object - Object to be added to the new state + * action - Increment/Decrement * state_list - List the state will be added to * * RETURN: Status @@ -85,7 +85,7 @@ acpi_ut_create_pkg_state_and_push(void *internal_object, * FUNCTION: acpi_ut_push_generic_state * * PARAMETERS: list_head - Head of the state stack - * State - State object to push + * state - State object to push * * RETURN: None * @@ -214,8 +214,8 @@ struct acpi_thread_state *acpi_ut_create_thread_state(void) * * FUNCTION: acpi_ut_create_update_state * - * PARAMETERS: Object - Initial Object to be installed in the state - * Action - Update action to be performed + * PARAMETERS: object - Initial Object to be installed in the state + * action - Update action to be performed * * RETURN: New state object, null on failure * @@ -252,8 +252,8 @@ union acpi_generic_state *acpi_ut_create_update_state(union acpi_operand_object * * FUNCTION: acpi_ut_create_pkg_state * - * PARAMETERS: Object - Initial Object to be installed in the state - * Action - Update action to be performed + * PARAMETERS: object - Initial Object to be installed in the state + * action - Update action to be performed * * RETURN: New state object, null on failure * @@ -325,7 +325,7 @@ union acpi_generic_state *acpi_ut_create_control_state(void) * * FUNCTION: acpi_ut_delete_generic_state * - * PARAMETERS: State - The state object to be deleted + * PARAMETERS: state - The state object to be deleted * * RETURN: None * diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c index afa94f51ff0b..534179f1177b 100644 --- a/drivers/acpi/acpica/utxface.c +++ b/drivers/acpi/acpica/utxface.c @@ -131,7 +131,7 @@ acpi_status __init acpi_initialize_subsystem(void) * * FUNCTION: acpi_enable_subsystem * - * PARAMETERS: Flags - Init/enable Options + * PARAMETERS: flags - Init/enable Options * * RETURN: Status * @@ -234,7 +234,7 @@ ACPI_EXPORT_SYMBOL(acpi_enable_subsystem) * * FUNCTION: acpi_initialize_objects * - * PARAMETERS: Flags - Init/enable Options + * PARAMETERS: flags - Init/enable Options * * RETURN: Status * @@ -409,7 +409,7 @@ ACPI_EXPORT_SYMBOL(acpi_subsystem_status) * PARAMETERS: out_buffer - A buffer to receive the resources for the * device * - * RETURN: Status - the status of the call + * RETURN: status - the status of the call * * DESCRIPTION: This function is called to get information about the current * state of the ACPI subsystem. It will return system information @@ -480,8 +480,8 @@ ACPI_EXPORT_SYMBOL(acpi_get_system_info) * * FUNCTION: acpi_install_initialization_handler * - * PARAMETERS: Handler - Callback procedure - * Function - Not (currently) used, see below + * PARAMETERS: handler - Callback procedure + * function - Not (currently) used, see below * * RETURN: Status * @@ -618,7 +618,7 @@ ACPI_EXPORT_SYMBOL(acpi_remove_interface) * * FUNCTION: acpi_install_interface_handler * - * PARAMETERS: Handler - The _OSI interface handler to install + * PARAMETERS: handler - The _OSI interface handler to install * NULL means "remove existing handler" * * RETURN: Status @@ -651,9 +651,9 @@ ACPI_EXPORT_SYMBOL(acpi_install_interface_handler) * FUNCTION: acpi_check_address_range * * PARAMETERS: space_id - Address space ID - * Address - Start address - * Length - Length - * Warn - TRUE if warning on overlap desired + * address - Start address + * length - Length + * warn - TRUE if warning on overlap desired * * RETURN: Count of the number of conflicts detected. * diff --git a/drivers/acpi/acpica/utxferror.c b/drivers/acpi/acpica/utxferror.c index 52b568af1819..6d63cc39b9ae 100644 --- a/drivers/acpi/acpica/utxferror.c +++ b/drivers/acpi/acpica/utxferror.c @@ -53,7 +53,7 @@ ACPI_MODULE_NAME("utxferror") * This module is used for the in-kernel ACPICA as well as the ACPICA * tools/applications. * - * For the i_aSL compiler case, the output is redirected to stderr so that + * For the iASL compiler case, the output is redirected to stderr so that * any of the various ACPI errors and warnings do not appear in the output * files, for either the compiler or disassembler portions of the tool. */ @@ -70,7 +70,7 @@ extern FILE *acpi_gbl_output_file; #else /* - * non-i_aSL case - no redirection, nothing to do + * non-iASL case - no redirection, nothing to do */ #define ACPI_MSG_REDIRECT_BEGIN #define ACPI_MSG_REDIRECT_END @@ -82,6 +82,8 @@ extern FILE *acpi_gbl_output_file; #define ACPI_MSG_EXCEPTION "ACPI Exception: " #define ACPI_MSG_WARNING "ACPI Warning: " #define ACPI_MSG_INFO "ACPI: " +#define ACPI_MSG_BIOS_ERROR "ACPI BIOS Bug: Error: " +#define ACPI_MSG_BIOS_WARNING "ACPI BIOS Bug: Warning: " /* * Common message suffix */ @@ -93,7 +95,7 @@ extern FILE *acpi_gbl_output_file; * * PARAMETERS: module_name - Caller's module name (for error output) * line_number - Caller's line number (for error output) - * Format - Printf format string + additional args + * format - Printf format string + additional args * * RETURN: None * @@ -124,8 +126,8 @@ ACPI_EXPORT_SYMBOL(acpi_error) * * PARAMETERS: module_name - Caller's module name (for error output) * line_number - Caller's line number (for error output) - * Status - Status to be formatted - * Format - Printf format string + additional args + * status - Status to be formatted + * format - Printf format string + additional args * * RETURN: None * @@ -159,7 +161,7 @@ ACPI_EXPORT_SYMBOL(acpi_exception) * * PARAMETERS: module_name - Caller's module name (for error output) * line_number - Caller's line number (for error output) - * Format - Printf format string + additional args + * format - Printf format string + additional args * * RETURN: None * @@ -190,7 +192,7 @@ ACPI_EXPORT_SYMBOL(acpi_warning) * * PARAMETERS: module_name - Caller's module name (for error output) * line_number - Caller's line number (for error output) - * Format - Printf format string + additional args + * format - Printf format string + additional args * * RETURN: None * @@ -218,6 +220,72 @@ acpi_info(const char *module_name, u32 line_number, const char *format, ...) ACPI_EXPORT_SYMBOL(acpi_info) +/******************************************************************************* + * + * FUNCTION: acpi_bios_error + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * format - Printf format string + additional args + * + * RETURN: None + * + * DESCRIPTION: Print "ACPI Firmware Error" message with module/line/version + * info + * + ******************************************************************************/ +void ACPI_INTERNAL_VAR_XFACE +acpi_bios_error(const char *module_name, + u32 line_number, const char *format, ...) +{ + va_list arg_list; + + ACPI_MSG_REDIRECT_BEGIN; + acpi_os_printf(ACPI_MSG_BIOS_ERROR); + + va_start(arg_list, format); + acpi_os_vprintf(format, arg_list); + ACPI_MSG_SUFFIX; + va_end(arg_list); + + ACPI_MSG_REDIRECT_END; +} + +ACPI_EXPORT_SYMBOL(acpi_bios_error) + +/******************************************************************************* + * + * FUNCTION: acpi_bios_warning + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * format - Printf format string + additional args + * + * RETURN: None + * + * DESCRIPTION: Print "ACPI Firmware Warning" message with module/line/version + * info + * + ******************************************************************************/ +void ACPI_INTERNAL_VAR_XFACE +acpi_bios_warning(const char *module_name, + u32 line_number, const char *format, ...) +{ + va_list arg_list; + + ACPI_MSG_REDIRECT_BEGIN; + acpi_os_printf(ACPI_MSG_BIOS_WARNING); + + va_start(arg_list, format); + acpi_os_vprintf(format, arg_list); + ACPI_MSG_SUFFIX; + va_end(arg_list); + + ACPI_MSG_REDIRECT_END; +} + +ACPI_EXPORT_SYMBOL(acpi_bios_warning) + /* * The remainder of this module contains internal error functions that may * be configured out. @@ -271,9 +339,9 @@ acpi_ut_predefined_warning(const char *module_name, * * PARAMETERS: module_name - Caller's module name (for error output) * line_number - Caller's line number (for error output) - * Pathname - Full pathname to the node + * pathname - Full pathname to the node * node_flags - From Namespace node for the method/object - * Format - Printf format string + additional args + * format - Printf format string + additional args * * RETURN: None * @@ -373,9 +441,9 @@ acpi_ut_namespace_error(const char *module_name, * * PARAMETERS: module_name - Caller's module name (for error output) * line_number - Caller's line number (for error output) - * Message - Error message to use on failure + * message - Error message to use on failure * prefix_node - Prefix relative to the path - * Path - Path to the node (optional) + * path - Path to the node (optional) * method_status - Execution status * * RETURN: None diff --git a/drivers/acpi/acpica/utxfmutex.c b/drivers/acpi/acpica/utxfmutex.c index 1427d191d15a..0a40a851b354 100644 --- a/drivers/acpi/acpica/utxfmutex.c +++ b/drivers/acpi/acpica/utxfmutex.c @@ -58,8 +58,8 @@ acpi_ut_get_mutex_object(acpi_handle handle, * * FUNCTION: acpi_ut_get_mutex_object * - * PARAMETERS: Handle - Mutex or prefix handle (optional) - * Pathname - Mutex pathname (optional) + * PARAMETERS: handle - Mutex or prefix handle (optional) + * pathname - Mutex pathname (optional) * ret_obj - Where the mutex object is returned * * RETURN: Status @@ -118,9 +118,9 @@ acpi_ut_get_mutex_object(acpi_handle handle, * * FUNCTION: acpi_acquire_mutex * - * PARAMETERS: Handle - Mutex or prefix handle (optional) - * Pathname - Mutex pathname (optional) - * Timeout - Max time to wait for the lock (millisec) + * PARAMETERS: handle - Mutex or prefix handle (optional) + * pathname - Mutex pathname (optional) + * timeout - Max time to wait for the lock (millisec) * * RETURN: Status * @@ -155,8 +155,8 @@ acpi_acquire_mutex(acpi_handle handle, acpi_string pathname, u16 timeout) * * FUNCTION: acpi_release_mutex * - * PARAMETERS: Handle - Mutex or prefix handle (optional) - * Pathname - Mutex pathname (optional) + * PARAMETERS: handle - Mutex or prefix handle (optional) + * pathname - Mutex pathname (optional) * * RETURN: Status * diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index 5577762daee1..00a783661d0b 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -243,7 +243,7 @@ static int pre_map_gar_callback(struct apei_exec_context *ctx, u8 ins = entry->instruction; if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER) - return acpi_os_map_generic_address(&entry->register_region); + return apei_map_generic_address(&entry->register_region); return 0; } @@ -276,7 +276,7 @@ static int post_unmap_gar_callback(struct apei_exec_context *ctx, u8 ins = entry->instruction; if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER) - acpi_os_unmap_generic_address(&entry->register_region); + apei_unmap_generic_address(&entry->register_region); return 0; } @@ -586,6 +586,11 @@ static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr, } *access_bit_width = 1UL << (access_size_code + 2); + /* Fixup common BIOS bug */ + if (bit_width == 32 && bit_offset == 0 && (*paddr & 0x03) == 0 && + *access_bit_width < 32) + *access_bit_width = 32; + if ((bit_width + bit_offset) > *access_bit_width) { pr_warning(FW_BUG APEI_PFX "Invalid bit width + offset in GAR [0x%llx/%u/%u/%u/%u]\n", @@ -606,6 +611,19 @@ static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr, return 0; } +int apei_map_generic_address(struct acpi_generic_address *reg) +{ + int rc; + u32 access_bit_width; + u64 address; + + rc = apei_check_gar(reg, &address, &access_bit_width); + if (rc) + return rc; + return acpi_os_map_generic_address(reg); +} +EXPORT_SYMBOL_GPL(apei_map_generic_address); + /* read GAR in interrupt (including NMI) or process context */ int apei_read(u64 *val, struct acpi_generic_address *reg) { diff --git a/drivers/acpi/apei/apei-internal.h b/drivers/acpi/apei/apei-internal.h index cca240a33038..f220d642136e 100644 --- a/drivers/acpi/apei/apei-internal.h +++ b/drivers/acpi/apei/apei-internal.h @@ -7,6 +7,8 @@ #define APEI_INTERNAL_H #include +#include +#include struct apei_exec_context; @@ -68,6 +70,13 @@ static inline int apei_exec_run_optional(struct apei_exec_context *ctx, u8 actio /* IP has been set in instruction function */ #define APEI_EXEC_SET_IP 1 +int apei_map_generic_address(struct acpi_generic_address *reg); + +static inline void apei_unmap_generic_address(struct acpi_generic_address *reg) +{ + acpi_os_unmap_generic_address(reg); +} + int apei_read(u64 *val, struct acpi_generic_address *reg); int apei_write(u64 val, struct acpi_generic_address *reg); diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index 9b3cac0abecc..1599566ed1fe 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -301,7 +301,7 @@ static struct ghes *ghes_new(struct acpi_hest_generic *generic) if (!ghes) return ERR_PTR(-ENOMEM); ghes->generic = generic; - rc = acpi_os_map_generic_address(&generic->error_status_address); + rc = apei_map_generic_address(&generic->error_status_address); if (rc) goto err_free; error_block_length = generic->error_block_length; @@ -321,7 +321,7 @@ static struct ghes *ghes_new(struct acpi_hest_generic *generic) return ghes; err_unmap: - acpi_os_unmap_generic_address(&generic->error_status_address); + apei_unmap_generic_address(&generic->error_status_address); err_free: kfree(ghes); return ERR_PTR(rc); @@ -330,7 +330,7 @@ err_free: static void ghes_fini(struct ghes *ghes) { kfree(ghes->estatus); - acpi_os_unmap_generic_address(&ghes->generic->error_status_address); + apei_unmap_generic_address(&ghes->generic->error_status_address); } enum { diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 7dd3f9fb9f3f..5662d64e6733 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -250,6 +250,13 @@ static int acpi_battery_get_property(struct power_supply *psy, else val->intval = battery->capacity_now * 1000; break; + case POWER_SUPPLY_PROP_CAPACITY: + if (battery->capacity_now && battery->full_charge_capacity) + val->intval = battery->capacity_now * 100/ + battery->full_charge_capacity; + else + val->intval = 0; + break; case POWER_SUPPLY_PROP_MODEL_NAME: val->strval = battery->model_number; break; @@ -276,6 +283,7 @@ static enum power_supply_property charge_battery_props[] = { POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, POWER_SUPPLY_PROP_CHARGE_FULL, POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CAPACITY, POWER_SUPPLY_PROP_MODEL_NAME, POWER_SUPPLY_PROP_MANUFACTURER, POWER_SUPPLY_PROP_SERIAL_NUMBER, @@ -292,6 +300,7 @@ static enum power_supply_property energy_battery_props[] = { POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, POWER_SUPPLY_PROP_ENERGY_FULL, POWER_SUPPLY_PROP_ENERGY_NOW, + POWER_SUPPLY_PROP_CAPACITY, POWER_SUPPLY_PROP_MODEL_NAME, POWER_SUPPLY_PROP_MANUFACTURER, POWER_SUPPLY_PROP_SERIAL_NUMBER, diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index adceafda9c17..9628652e080c 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -574,6 +574,10 @@ static void acpi_bus_osc_support(void) capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PPC_OST_SUPPORT; #endif +#ifdef ACPI_HOTPLUG_OST + capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_HOTPLUG_OST_SUPPORT; +#endif + if (!ghes_disable) capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_APEI_SUPPORT; if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))) diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c index 45cd03b4630e..1f9f7d7d7bc5 100644 --- a/drivers/acpi/container.c +++ b/drivers/acpi/container.c @@ -158,9 +158,7 @@ static void container_notify_cb(acpi_handle handle, u32 type, void *context) int result; int present; acpi_status status; - - - present = is_device_present(handle); + u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */ switch (type) { case ACPI_NOTIFY_BUS_CHECK: @@ -169,32 +167,47 @@ static void container_notify_cb(acpi_handle handle, u32 type, void *context) printk(KERN_WARNING "Container driver received %s event\n", (type == ACPI_NOTIFY_BUS_CHECK) ? "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK"); + + present = is_device_present(handle); status = acpi_bus_get_device(handle, &device); - if (present) { - if (ACPI_FAILURE(status) || !device) { - result = container_device_add(&device, handle); - if (!result) - kobject_uevent(&device->dev.kobj, - KOBJ_ONLINE); - else - printk(KERN_WARNING - "Failed to add container\n"); - } - } else { + if (!present) { if (ACPI_SUCCESS(status)) { /* device exist and this is a remove request */ + device->flags.eject_pending = 1; kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE); + return; } + break; } + + if (!ACPI_FAILURE(status) || device) + break; + + result = container_device_add(&device, handle); + if (result) { + printk(KERN_WARNING "Failed to add container\n"); + break; + } + + kobject_uevent(&device->dev.kobj, KOBJ_ONLINE); + ost_code = ACPI_OST_SC_SUCCESS; break; + case ACPI_NOTIFY_EJECT_REQUEST: if (!acpi_bus_get_device(handle, &device) && device) { + device->flags.eject_pending = 1; kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE); + return; } break; + default: - break; + /* non-hotplug event; possibly handled by other handler */ + return; } + + /* Inform firmware that the hotplug operation has completed */ + (void) acpi_evaluate_hotplug_ost(handle, type, ost_code, NULL); return; } diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index c3881b2eb8b2..9eaf708f5885 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -891,7 +891,7 @@ static void acpi_os_execute_deferred(struct work_struct *work) struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work); if (dpc->wait) - acpi_os_wait_events_complete(NULL); + acpi_os_wait_events_complete(); dpc->function(dpc->context); kfree(dpc); @@ -987,7 +987,7 @@ acpi_status acpi_os_hotplug_execute(acpi_osd_exec_callback function, return __acpi_os_execute(0, function, context, 1); } -void acpi_os_wait_events_complete(void *context) +void acpi_os_wait_events_complete(void) { flush_workqueue(kacpid_wq); flush_workqueue(kacpi_notify_wq); diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index c850de4c9a14..eff722278ff5 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -189,10 +189,12 @@ int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id) * Processor (CPU3, 0x03, 0x00000410, 0x06) {} * } * - * Ignores apic_id and always return 0 for CPU0's handle. + * Ignores apic_id and always returns 0 for the processor + * handle with acpi id 0 if nr_cpu_ids is 1. + * This should be the case if SMP tables are not found. * Return -1 for other CPU's handle. */ - if (acpi_id == 0) + if (nr_cpu_ids <= 1 && acpi_id == 0) return acpi_id; else return apic_id; diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 0734086537b8..971c45474703 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -701,9 +701,9 @@ static void acpi_processor_hotplug_notify(acpi_handle handle, { struct acpi_processor *pr; struct acpi_device *device = NULL; + u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */ int result; - switch (event) { case ACPI_NOTIFY_BUS_CHECK: case ACPI_NOTIFY_DEVICE_CHECK: @@ -715,14 +715,18 @@ static void acpi_processor_hotplug_notify(acpi_handle handle, if (!is_processor_present(handle)) break; - if (acpi_bus_get_device(handle, &device)) { - result = acpi_processor_device_add(handle, &device); - if (result) - printk(KERN_ERR PREFIX - "Unable to add the device\n"); + if (!acpi_bus_get_device(handle, &device)) + break; + + result = acpi_processor_device_add(handle, &device); + if (result) { + printk(KERN_ERR PREFIX "Unable to add the device\n"); break; } + + ost_code = ACPI_OST_SC_SUCCESS; break; + case ACPI_NOTIFY_EJECT_REQUEST: ACPI_DEBUG_PRINT((ACPI_DB_INFO, "received ACPI_NOTIFY_EJECT_REQUEST\n")); @@ -736,15 +740,23 @@ static void acpi_processor_hotplug_notify(acpi_handle handle, if (!pr) { printk(KERN_ERR PREFIX "Driver data is NULL, dropping EJECT\n"); - return; + break; } + + /* REVISIT: update when eject is supported */ + ost_code = ACPI_OST_SC_EJECT_NOT_SUPPORTED; break; + default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported event [0x%x]\n", event)); - break; + + /* non-hotplug event; possibly handled by other handler */ + return; } + /* Inform firmware that the hotplug operation has completed */ + (void) acpi_evaluate_hotplug_ost(handle, event, ost_code, NULL); return; } diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f3decb30223f..9837c9c4f009 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -224,6 +224,7 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr, /* * Suspend / resume control */ +static int acpi_idle_suspend; static u32 saved_bm_rld; static void acpi_idle_bm_rld_save(void) @@ -242,13 +243,21 @@ static void acpi_idle_bm_rld_restore(void) int acpi_processor_suspend(struct acpi_device * device, pm_message_t state) { + if (acpi_idle_suspend == 1) + return 0; + acpi_idle_bm_rld_save(); + acpi_idle_suspend = 1; return 0; } int acpi_processor_resume(struct acpi_device * device) { + if (acpi_idle_suspend == 0) + return 0; + acpi_idle_bm_rld_restore(); + acpi_idle_suspend = 0; return 0; } @@ -304,16 +313,16 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5; /* determine latencies from FADT */ - pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency; - pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency; + pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.c2_latency; + pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.c3_latency; /* * FADT specified C2 latency must be less than or equal to * 100 microseconds. */ - if (acpi_gbl_FADT.C2latency > ACPI_PROCESSOR_MAX_C2_LATENCY) { + if (acpi_gbl_FADT.c2_latency > ACPI_PROCESSOR_MAX_C2_LATENCY) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "C2 latency too large [%d]\n", acpi_gbl_FADT.C2latency)); + "C2 latency too large [%d]\n", acpi_gbl_FADT.c2_latency)); /* invalidate C2 */ pr->power.states[ACPI_STATE_C2].address = 0; } @@ -322,9 +331,9 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) * FADT supplied C3 latency must be less than or equal to * 1000 microseconds. */ - if (acpi_gbl_FADT.C3latency > ACPI_PROCESSOR_MAX_C3_LATENCY) { + if (acpi_gbl_FADT.c3_latency > ACPI_PROCESSOR_MAX_C3_LATENCY) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "C3 latency too large [%d]\n", acpi_gbl_FADT.C3latency)); + "C3 latency too large [%d]\n", acpi_gbl_FADT.c3_latency)); /* invalidate C3 */ pr->power.states[ACPI_STATE_C3].address = 0; } @@ -754,6 +763,12 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, local_irq_disable(); + if (acpi_idle_suspend) { + local_irq_enable(); + cpu_relax(); + return -EBUSY; + } + lapic_timer_state_broadcast(pr, cx, 1); kt1 = ktime_get_real(); acpi_idle_do_entry(cx); @@ -823,6 +838,12 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, local_irq_disable(); + if (acpi_idle_suspend) { + local_irq_enable(); + cpu_relax(); + return -EBUSY; + } + if (cx->entry_method != ACPI_CSTATE_FFH) { current_thread_info()->status &= ~TS_POLLING; /* @@ -907,14 +928,21 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, drv, drv->safe_state_index); } else { local_irq_disable(); - acpi_safe_halt(); + if (!acpi_idle_suspend) + acpi_safe_halt(); local_irq_enable(); - return -EINVAL; + return -EBUSY; } } local_irq_disable(); + if (acpi_idle_suspend) { + local_irq_enable(); + cpu_relax(); + return -EBUSY; + } + if (cx->entry_method != ACPI_CSTATE_FFH) { current_thread_info()->status &= ~TS_POLLING; /* diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index c8a1f3b68110..148556a8f0f2 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -83,19 +83,29 @@ acpi_device_modalias_show(struct device *dev, struct device_attribute *attr, cha } static DEVICE_ATTR(modalias, 0444, acpi_device_modalias_show, NULL); -static void acpi_bus_hot_remove_device(void *context) +/** + * acpi_bus_hot_remove_device: hot-remove a device and its children + * @context: struct acpi_eject_event pointer (freed in this func) + * + * Hot-remove a device and its children. This function frees up the + * memory space passed by arg context, so that the caller may call + * this function asynchronously through acpi_os_hotplug_execute(). + */ +void acpi_bus_hot_remove_device(void *context) { + struct acpi_eject_event *ej_event = (struct acpi_eject_event *) context; struct acpi_device *device; - acpi_handle handle = context; + acpi_handle handle = ej_event->handle; struct acpi_object_list arg_list; union acpi_object arg; acpi_status status = AE_OK; + u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */ if (acpi_bus_get_device(handle, &device)) - return; + goto err_out; if (!device) - return; + goto err_out; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Hot-removing device %s...\n", dev_name(&device->dev))); @@ -103,7 +113,7 @@ static void acpi_bus_hot_remove_device(void *context) if (acpi_bus_trim(device, 1)) { printk(KERN_ERR PREFIX "Removing device failed\n"); - return; + goto err_out; } /* power off device */ @@ -129,10 +139,21 @@ static void acpi_bus_hot_remove_device(void *context) * TBD: _EJD support. */ status = acpi_evaluate_object(handle, "_EJ0", &arg_list, NULL); - if (ACPI_FAILURE(status)) - printk(KERN_WARNING PREFIX - "Eject device failed\n"); + if (ACPI_FAILURE(status)) { + if (status != AE_NOT_FOUND) + printk(KERN_WARNING PREFIX + "Eject device failed\n"); + goto err_out; + } + kfree(context); + return; + +err_out: + /* Inform firmware the hot-remove operation has completed w/ error */ + (void) acpi_evaluate_hotplug_ost(handle, + ej_event->event, ost_code, NULL); + kfree(context); return; } @@ -144,6 +165,7 @@ acpi_eject_store(struct device *d, struct device_attribute *attr, acpi_status status; acpi_object_type type = 0; struct acpi_device *acpi_device = to_acpi_device(d); + struct acpi_eject_event *ej_event; if ((!count) || (buf[0] != '1')) { return -EINVAL; @@ -160,7 +182,25 @@ acpi_eject_store(struct device *d, struct device_attribute *attr, goto err; } - acpi_os_hotplug_execute(acpi_bus_hot_remove_device, acpi_device->handle); + ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL); + if (!ej_event) { + ret = -ENOMEM; + goto err; + } + + ej_event->handle = acpi_device->handle; + if (acpi_device->flags.eject_pending) { + /* event originated from ACPI eject notification */ + ej_event->event = ACPI_NOTIFY_EJECT_REQUEST; + acpi_device->flags.eject_pending = 0; + } else { + /* event originated from user */ + ej_event->event = ACPI_OST_EC_OSPM_EJECT; + (void) acpi_evaluate_hotplug_ost(ej_event->handle, + ej_event->event, ACPI_OST_SC_EJECT_IN_PROGRESS, NULL); + } + + acpi_os_hotplug_execute(acpi_bus_hot_remove_device, (void *)ej_event); err: return ret; } diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 88561029cca8..23a53c013f1e 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -143,7 +143,7 @@ void __init acpi_old_suspend_ordering(void) static int acpi_pm_freeze(void) { acpi_disable_all_gpes(); - acpi_os_wait_events_complete(NULL); + acpi_os_wait_events_complete(); acpi_ec_block_transactions(); return 0; } diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index 9f66181c814e..240a24400976 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -173,7 +173,7 @@ static int param_set_trace_state(const char *val, struct kernel_param *kp) { int result = 0; - if (!strncmp(val, "enable", strlen("enable") - 1)) { + if (!strncmp(val, "enable", strlen("enable"))) { result = acpi_debug_trace(trace_method_name, trace_debug_level, trace_debug_layer, 0); if (result) @@ -181,7 +181,7 @@ static int param_set_trace_state(const char *val, struct kernel_param *kp) goto exit; } - if (!strncmp(val, "disable", strlen("disable") - 1)) { + if (!strncmp(val, "disable", strlen("disable"))) { int name = 0; result = acpi_debug_trace((char *)&name, trace_debug_level, trace_debug_layer, 0); diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 7dbebea1ec31..8275e7b06962 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -550,8 +550,6 @@ static int thermal_get_temp(struct thermal_zone_device *thermal, return 0; } -static const char enabled[] = "kernel"; -static const char disabled[] = "user"; static int thermal_get_mode(struct thermal_zone_device *thermal, enum thermal_device_mode *mode) { @@ -588,8 +586,8 @@ static int thermal_set_mode(struct thermal_zone_device *thermal, if (enable != tz->tz_enabled) { tz->tz_enabled = enable; ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "%s ACPI thermal control\n", - tz->tz_enabled ? enabled : disabled)); + "%s kernel ACPI thermal control\n", + tz->tz_enabled ? "Enable" : "Disable")); acpi_thermal_check(tz); } return 0; @@ -845,7 +843,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) if (tz->trips.passive.flags.valid) tz->thermal_zone = - thermal_zone_device_register("acpitz", trips, tz, + thermal_zone_device_register("acpitz", trips, 0, tz, &acpi_thermal_zone_ops, tz->trips.passive.tc1, tz->trips.passive.tc2, @@ -853,7 +851,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) tz->polling_frequency*100); else tz->thermal_zone = - thermal_zone_device_register("acpitz", trips, tz, + thermal_zone_device_register("acpitz", trips, 0, tz, &acpi_thermal_zone_ops, 0, 0, 0, tz->polling_frequency*100); diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index adbbc1c80a26..3e87c9c538aa 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -412,3 +412,45 @@ out: return status; } EXPORT_SYMBOL(acpi_get_physical_device_location); + +/** + * acpi_evaluate_hotplug_ost: Evaluate _OST for hotplug operations + * @handle: ACPI device handle + * @source_event: source event code + * @status_code: status code + * @status_buf: optional detailed information (NULL if none) + * + * Evaluate _OST for hotplug operations. All ACPI hotplug handlers + * must call this function when evaluating _OST for hotplug operations. + * When the platform does not support _OST, this function has no effect. + */ +acpi_status +acpi_evaluate_hotplug_ost(acpi_handle handle, u32 source_event, + u32 status_code, struct acpi_buffer *status_buf) +{ +#ifdef ACPI_HOTPLUG_OST + union acpi_object params[3] = { + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_BUFFER,} + }; + struct acpi_object_list arg_list = {3, params}; + acpi_status status; + + params[0].integer.value = source_event; + params[1].integer.value = status_code; + if (status_buf != NULL) { + params[2].buffer.pointer = status_buf->pointer; + params[2].buffer.length = status_buf->length; + } else { + params[2].buffer.pointer = NULL; + params[2].buffer.length = 0; + } + + status = acpi_evaluate_object(handle, "_OST", &arg_list, NULL); + return status; +#else + return AE_OK; +#endif +} +EXPORT_SYMBOL(acpi_evaluate_hotplug_ost); diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index a576575617d7..1e0a9e17c31d 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -558,6 +558,8 @@ acpi_video_bus_DOS(struct acpi_video_bus *video, int bios_flag, int lcd_flag) union acpi_object arg0 = { ACPI_TYPE_INTEGER }; struct acpi_object_list args = { 1, &arg0 }; + if (!video->cap._DOS) + return 0; if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1) return -EINVAL; diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index 3239517f4d90..ac6a5beb28f3 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -4,7 +4,7 @@ * Arasan Compact Flash host controller source file * * Copyright (C) 2011 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -959,7 +959,7 @@ static struct platform_driver arasan_cf_driver = { module_platform_driver(arasan_cf_driver); -MODULE_AUTHOR("Viresh Kumar "); +MODULE_AUTHOR("Viresh Kumar "); MODULE_DESCRIPTION("Arasan ATA Compact Flash driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 1b1cbb571d38..4b01ab3d2c24 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -24,6 +24,7 @@ #include #include #include +#include #include "base.h" #include "power/power.h" @@ -100,7 +101,7 @@ static void driver_deferred_probe_add(struct device *dev) mutex_lock(&deferred_probe_mutex); if (list_empty(&dev->p->deferred_probe)) { dev_dbg(dev, "Added to deferred list\n"); - list_add(&dev->p->deferred_probe, &deferred_probe_pending_list); + list_add_tail(&dev->p->deferred_probe, &deferred_probe_pending_list); } mutex_unlock(&deferred_probe_mutex); } @@ -332,6 +333,7 @@ void wait_for_device_probe(void) /* wait for the known devices to complete their probing */ wait_event(probe_waitqueue, atomic_read(&probe_count) == 0); async_synchronize_full(); + scsi_complete_async_scans(); } EXPORT_SYMBOL_GPL(wait_for_device_probe); diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index e0fb5b0435a3..9cb845e49334 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -1031,7 +1031,7 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) dpm_wait_for_children(dev, async); if (async_error) - return 0; + goto Complete; pm_runtime_get_noresume(dev); if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) @@ -1040,7 +1040,7 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) if (pm_wakeup_pending()) { pm_runtime_put_sync(dev); async_error = -EBUSY; - return 0; + goto Complete; } device_lock(dev); @@ -1097,6 +1097,8 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) } device_unlock(dev); + + Complete: complete_all(&dev->power.completion); if (error) { diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 0bcda488f11c..c89aa01fb1de 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -246,11 +246,11 @@ struct regmap *regmap_init(struct device *dev, map->lock = regmap_lock_mutex; map->unlock = regmap_unlock_mutex; } - map->format.buf_size = (config->reg_bits + config->val_bits) / 8; map->format.reg_bytes = DIV_ROUND_UP(config->reg_bits, 8); map->format.pad_bytes = config->pad_bits / 8; map->format.val_bytes = DIV_ROUND_UP(config->val_bits, 8); - map->format.buf_size += map->format.pad_bytes; + map->format.buf_size = DIV_ROUND_UP(config->reg_bits + + config->val_bits + config->pad_bits, 8); map->reg_shift = config->pad_bits % 8; if (config->reg_stride) map->reg_stride = config->reg_stride; @@ -368,7 +368,7 @@ struct regmap *regmap_init(struct device *dev, ret = regcache_init(map, config); if (ret < 0) - goto err_free_workbuf; + goto err_debugfs; /* Add a devres resource for dev_get_regmap() */ m = devres_alloc(dev_get_regmap_release, sizeof(*m), GFP_KERNEL); @@ -383,7 +383,8 @@ struct regmap *regmap_init(struct device *dev, err_cache: regcache_exit(map); -err_free_workbuf: +err_debugfs: + regmap_debugfs_exit(map); kfree(map->work_buf); err_map: kfree(map); @@ -471,6 +472,7 @@ int regmap_reinit_cache(struct regmap *map, const struct regmap_config *config) return ret; } +EXPORT_SYMBOL_GPL(regmap_reinit_cache); /** * regmap_exit(): Free a previously allocated register map diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c index a058842f14fd..61ce4054b3c3 100644 --- a/drivers/bcma/driver_chipcommon_pmu.c +++ b/drivers/bcma/driver_chipcommon_pmu.c @@ -139,7 +139,9 @@ void bcma_pmu_workarounds(struct bcma_drv_cc *cc) bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); break; case 0x4331: - /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ + case 43431: + /* Ext PA lines must be enabled for tx on BCM4331 */ + bcma_chipco_bcm4331_ext_pa_lines_ctl(cc, true); break; case 43224: if (bus->chipinfo.rev == 0) { diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c index 9a96f14c8f47..c32ebd537abe 100644 --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c @@ -232,17 +232,19 @@ void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable) { - struct pci_dev *pdev = pc->core->bus->host_pci; + struct pci_dev *pdev; u32 coremask, tmp; int err = 0; - if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) { + if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) { /* This bcma device is not on a PCI host-bus. So the IRQs are * not routed through the PCI core. * So we must not enable routing through the PCI core. */ goto out; } + pdev = pc->core->bus->host_pci; + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); if (err) goto out; diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c index c7f93359acb0..f16f42d36071 100644 --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c @@ -579,13 +579,13 @@ int bcma_sprom_get(struct bcma_bus *bus) if (!sprom) return -ENOMEM; - if (bus->chipinfo.id == 0x4331) + if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431) bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); pr_debug("SPROM offset 0x%x\n", offset); bcma_sprom_read(bus, offset, sprom); - if (bus->chipinfo.id == 0x4331) + if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431) bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); err = bcma_sprom_valid(sprom); diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c index b5c5ff53cb57..fcb956bb4b4c 100644 --- a/drivers/block/drbd/drbd_bitmap.c +++ b/drivers/block/drbd/drbd_bitmap.c @@ -1475,10 +1475,17 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi first_word = 0; spin_lock_irq(&b->bm_lock); } - /* last page (respectively only page, for first page == last page) */ last_word = MLPP(el >> LN2_BPL); - bm_set_full_words_within_one_page(mdev->bitmap, last_page, first_word, last_word); + + /* consider bitmap->bm_bits = 32768, bitmap->bm_number_of_pages = 1. (or multiples). + * ==> e = 32767, el = 32768, last_page = 2, + * and now last_word = 0. + * We do not want to touch last_page in this case, + * as we did not allocate it, it is not present in bitmap->bm_pages. + */ + if (last_word) + bm_set_full_words_within_one_page(mdev->bitmap, last_page, first_word, last_word); /* possibly trailing bits. * example: (e & 63) == 63, el will be e+1. diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index 9c5c84946b05..8e93a6ac9bb6 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -472,12 +472,17 @@ int __req_mod(struct drbd_request *req, enum drbd_req_event what, req->rq_state |= RQ_LOCAL_COMPLETED; req->rq_state &= ~RQ_LOCAL_PENDING; - D_ASSERT(!(req->rq_state & RQ_NET_MASK)); + if (req->rq_state & RQ_LOCAL_ABORTED) { + _req_may_be_done(req, m); + break; + } __drbd_chk_io_error(mdev, false); goto_queue_for_net_read: + D_ASSERT(!(req->rq_state & RQ_NET_MASK)); + /* no point in retrying if there is no good remote data, * or we have no connection. */ if (mdev->state.pdsk != D_UP_TO_DATE) { @@ -765,6 +770,40 @@ static int drbd_may_do_local_read(struct drbd_conf *mdev, sector_t sector, int s return 0 == drbd_bm_count_bits(mdev, sbnr, ebnr); } +static void maybe_pull_ahead(struct drbd_conf *mdev) +{ + int congested = 0; + + /* If I don't even have good local storage, we can not reasonably try + * to pull ahead of the peer. We also need the local reference to make + * sure mdev->act_log is there. + * Note: caller has to make sure that net_conf is there. + */ + if (!get_ldev_if_state(mdev, D_UP_TO_DATE)) + return; + + if (mdev->net_conf->cong_fill && + atomic_read(&mdev->ap_in_flight) >= mdev->net_conf->cong_fill) { + dev_info(DEV, "Congestion-fill threshold reached\n"); + congested = 1; + } + + if (mdev->act_log->used >= mdev->net_conf->cong_extents) { + dev_info(DEV, "Congestion-extents threshold reached\n"); + congested = 1; + } + + if (congested) { + queue_barrier(mdev); /* last barrier, after mirrored writes */ + + if (mdev->net_conf->on_congestion == OC_PULL_AHEAD) + _drbd_set_state(_NS(mdev, conn, C_AHEAD), 0, NULL); + else /*mdev->net_conf->on_congestion == OC_DISCONNECT */ + _drbd_set_state(_NS(mdev, conn, C_DISCONNECTING), 0, NULL); + } + put_ldev(mdev); +} + static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, unsigned long start_time) { const int rw = bio_rw(bio); @@ -972,29 +1011,8 @@ allocate_barrier: _req_mod(req, queue_for_send_oos); if (remote && - mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96) { - int congested = 0; - - if (mdev->net_conf->cong_fill && - atomic_read(&mdev->ap_in_flight) >= mdev->net_conf->cong_fill) { - dev_info(DEV, "Congestion-fill threshold reached\n"); - congested = 1; - } - - if (mdev->act_log->used >= mdev->net_conf->cong_extents) { - dev_info(DEV, "Congestion-extents threshold reached\n"); - congested = 1; - } - - if (congested) { - queue_barrier(mdev); /* last barrier, after mirrored writes */ - - if (mdev->net_conf->on_congestion == OC_PULL_AHEAD) - _drbd_set_state(_NS(mdev, conn, C_AHEAD), 0, NULL); - else /*mdev->net_conf->on_congestion == OC_DISCONNECT */ - _drbd_set_state(_NS(mdev, conn, C_DISCONNECTING), 0, NULL); - } - } + mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96) + maybe_pull_ahead(mdev); spin_unlock_irq(&mdev->req_lock); kfree(b); /* if someone else has beaten us to it... */ diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index cce7df367b79..553f43a90953 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -671,6 +671,7 @@ static void __reschedule_timeout(int drive, const char *message) if (drive == current_reqD) drive = current_drive; + __cancel_delayed_work(&fd_timeout); if (drive < 0 || drive >= N_DRIVE) { delay = 20UL * HZ; diff --git a/drivers/block/loop.c b/drivers/block/loop.c index bbca966f8f66..3bba65510d23 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -1597,14 +1597,12 @@ static int loop_add(struct loop_device **l, int i) struct gendisk *disk; int err; + err = -ENOMEM; lo = kzalloc(sizeof(*lo), GFP_KERNEL); - if (!lo) { - err = -ENOMEM; + if (!lo) goto out; - } - err = idr_pre_get(&loop_index_idr, GFP_KERNEL); - if (err < 0) + if (!idr_pre_get(&loop_index_idr, GFP_KERNEL)) goto out_free_dev; if (i >= 0) { diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 264bc77dcb91..a8fddeb3d638 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -37,6 +37,7 @@ #include #include <../drivers/ata/ahci.h> #include +#include #include "mtip32xx.h" #define HW_CMD_SLOT_SZ (MTIP_MAX_COMMAND_SLOTS * 32) @@ -85,6 +86,7 @@ static int instance; * allocated in mtip_init(). */ static int mtip_major; +static struct dentry *dfs_parent; static DEFINE_SPINLOCK(rssd_index_lock); static DEFINE_IDA(rssd_index_ida); @@ -2546,7 +2548,7 @@ static struct scatterlist *mtip_hw_get_scatterlist(struct driver_data *dd, } /* - * Sysfs register/status dump. + * Sysfs status dump. * * @dev Pointer to the device structure, passed by the kernrel. * @attr Pointer to the device_attribute structure passed by the kernel. @@ -2555,71 +2557,6 @@ static struct scatterlist *mtip_hw_get_scatterlist(struct driver_data *dd, * return value * The size, in bytes, of the data copied into buf. */ -static ssize_t mtip_hw_show_registers(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - u32 group_allocated; - struct driver_data *dd = dev_to_disk(dev)->private_data; - int size = 0; - int n; - - size += sprintf(&buf[size], "Hardware\n--------\n"); - size += sprintf(&buf[size], "S ACTive : [ 0x"); - - for (n = dd->slot_groups-1; n >= 0; n--) - size += sprintf(&buf[size], "%08X ", - readl(dd->port->s_active[n])); - - size += sprintf(&buf[size], "]\n"); - size += sprintf(&buf[size], "Command Issue : [ 0x"); - - for (n = dd->slot_groups-1; n >= 0; n--) - size += sprintf(&buf[size], "%08X ", - readl(dd->port->cmd_issue[n])); - - size += sprintf(&buf[size], "]\n"); - size += sprintf(&buf[size], "Completed : [ 0x"); - - for (n = dd->slot_groups-1; n >= 0; n--) - size += sprintf(&buf[size], "%08X ", - readl(dd->port->completed[n])); - - size += sprintf(&buf[size], "]\n"); - size += sprintf(&buf[size], "PORT IRQ STAT : [ 0x%08X ]\n", - readl(dd->port->mmio + PORT_IRQ_STAT)); - size += sprintf(&buf[size], "HOST IRQ STAT : [ 0x%08X ]\n", - readl(dd->mmio + HOST_IRQ_STAT)); - size += sprintf(&buf[size], "\n"); - - size += sprintf(&buf[size], "Local\n-----\n"); - size += sprintf(&buf[size], "Allocated : [ 0x"); - - for (n = dd->slot_groups-1; n >= 0; n--) { - if (sizeof(long) > sizeof(u32)) - group_allocated = - dd->port->allocated[n/2] >> (32*(n&1)); - else - group_allocated = dd->port->allocated[n]; - size += sprintf(&buf[size], "%08X ", group_allocated); - } - size += sprintf(&buf[size], "]\n"); - - size += sprintf(&buf[size], "Commands in Q: [ 0x"); - - for (n = dd->slot_groups-1; n >= 0; n--) { - if (sizeof(long) > sizeof(u32)) - group_allocated = - dd->port->cmds_to_issue[n/2] >> (32*(n&1)); - else - group_allocated = dd->port->cmds_to_issue[n]; - size += sprintf(&buf[size], "%08X ", group_allocated); - } - size += sprintf(&buf[size], "]\n"); - - return size; -} - static ssize_t mtip_hw_show_status(struct device *dev, struct device_attribute *attr, char *buf) @@ -2637,24 +2574,121 @@ static ssize_t mtip_hw_show_status(struct device *dev, return size; } -static ssize_t mtip_hw_show_flags(struct device *dev, - struct device_attribute *attr, - char *buf) +static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL); + +static ssize_t mtip_hw_read_registers(struct file *f, char __user *ubuf, + size_t len, loff_t *offset) { - struct driver_data *dd = dev_to_disk(dev)->private_data; - int size = 0; + struct driver_data *dd = (struct driver_data *)f->private_data; + char buf[MTIP_DFS_MAX_BUF_SIZE]; + u32 group_allocated; + int size = *offset; + int n; - size += sprintf(&buf[size], "Flag in port struct : [ %08lX ]\n", - dd->port->flags); - size += sprintf(&buf[size], "Flag in dd struct : [ %08lX ]\n", - dd->dd_flag); + if (!len || size) + return 0; - return size; + if (size < 0) + return -EINVAL; + + size += sprintf(&buf[size], "H/ S ACTive : [ 0x"); + + for (n = dd->slot_groups-1; n >= 0; n--) + size += sprintf(&buf[size], "%08X ", + readl(dd->port->s_active[n])); + + size += sprintf(&buf[size], "]\n"); + size += sprintf(&buf[size], "H/ Command Issue : [ 0x"); + + for (n = dd->slot_groups-1; n >= 0; n--) + size += sprintf(&buf[size], "%08X ", + readl(dd->port->cmd_issue[n])); + + size += sprintf(&buf[size], "]\n"); + size += sprintf(&buf[size], "H/ Completed : [ 0x"); + + for (n = dd->slot_groups-1; n >= 0; n--) + size += sprintf(&buf[size], "%08X ", + readl(dd->port->completed[n])); + + size += sprintf(&buf[size], "]\n"); + size += sprintf(&buf[size], "H/ PORT IRQ STAT : [ 0x%08X ]\n", + readl(dd->port->mmio + PORT_IRQ_STAT)); + size += sprintf(&buf[size], "H/ HOST IRQ STAT : [ 0x%08X ]\n", + readl(dd->mmio + HOST_IRQ_STAT)); + size += sprintf(&buf[size], "\n"); + + size += sprintf(&buf[size], "L/ Allocated : [ 0x"); + + for (n = dd->slot_groups-1; n >= 0; n--) { + if (sizeof(long) > sizeof(u32)) + group_allocated = + dd->port->allocated[n/2] >> (32*(n&1)); + else + group_allocated = dd->port->allocated[n]; + size += sprintf(&buf[size], "%08X ", group_allocated); + } + size += sprintf(&buf[size], "]\n"); + + size += sprintf(&buf[size], "L/ Commands in Q : [ 0x"); + + for (n = dd->slot_groups-1; n >= 0; n--) { + if (sizeof(long) > sizeof(u32)) + group_allocated = + dd->port->cmds_to_issue[n/2] >> (32*(n&1)); + else + group_allocated = dd->port->cmds_to_issue[n]; + size += sprintf(&buf[size], "%08X ", group_allocated); + } + size += sprintf(&buf[size], "]\n"); + + *offset = size <= len ? size : len; + size = copy_to_user(ubuf, buf, *offset); + if (size) + return -EFAULT; + + return *offset; } -static DEVICE_ATTR(registers, S_IRUGO, mtip_hw_show_registers, NULL); -static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL); -static DEVICE_ATTR(flags, S_IRUGO, mtip_hw_show_flags, NULL); +static ssize_t mtip_hw_read_flags(struct file *f, char __user *ubuf, + size_t len, loff_t *offset) +{ + struct driver_data *dd = (struct driver_data *)f->private_data; + char buf[MTIP_DFS_MAX_BUF_SIZE]; + int size = *offset; + + if (!len || size) + return 0; + + if (size < 0) + return -EINVAL; + + size += sprintf(&buf[size], "Flag-port : [ %08lX ]\n", + dd->port->flags); + size += sprintf(&buf[size], "Flag-dd : [ %08lX ]\n", + dd->dd_flag); + + *offset = size <= len ? size : len; + size = copy_to_user(ubuf, buf, *offset); + if (size) + return -EFAULT; + + return *offset; +} + +static const struct file_operations mtip_regs_fops = { + .owner = THIS_MODULE, + .open = simple_open, + .read = mtip_hw_read_registers, + .llseek = no_llseek, +}; + +static const struct file_operations mtip_flags_fops = { + .owner = THIS_MODULE, + .open = simple_open, + .read = mtip_hw_read_flags, + .llseek = no_llseek, +}; /* * Create the sysfs related attributes. @@ -2671,15 +2705,9 @@ static int mtip_hw_sysfs_init(struct driver_data *dd, struct kobject *kobj) if (!kobj || !dd) return -EINVAL; - if (sysfs_create_file(kobj, &dev_attr_registers.attr)) - dev_warn(&dd->pdev->dev, - "Error creating 'registers' sysfs entry\n"); if (sysfs_create_file(kobj, &dev_attr_status.attr)) dev_warn(&dd->pdev->dev, "Error creating 'status' sysfs entry\n"); - if (sysfs_create_file(kobj, &dev_attr_flags.attr)) - dev_warn(&dd->pdev->dev, - "Error creating 'flags' sysfs entry\n"); return 0; } @@ -2698,13 +2726,39 @@ static int mtip_hw_sysfs_exit(struct driver_data *dd, struct kobject *kobj) if (!kobj || !dd) return -EINVAL; - sysfs_remove_file(kobj, &dev_attr_registers.attr); sysfs_remove_file(kobj, &dev_attr_status.attr); - sysfs_remove_file(kobj, &dev_attr_flags.attr); return 0; } +static int mtip_hw_debugfs_init(struct driver_data *dd) +{ + if (!dfs_parent) + return -1; + + dd->dfs_node = debugfs_create_dir(dd->disk->disk_name, dfs_parent); + if (IS_ERR_OR_NULL(dd->dfs_node)) { + dev_warn(&dd->pdev->dev, + "Error creating node %s under debugfs\n", + dd->disk->disk_name); + dd->dfs_node = NULL; + return -1; + } + + debugfs_create_file("flags", S_IRUGO, dd->dfs_node, dd, + &mtip_flags_fops); + debugfs_create_file("registers", S_IRUGO, dd->dfs_node, dd, + &mtip_regs_fops); + + return 0; +} + +static void mtip_hw_debugfs_exit(struct driver_data *dd) +{ + debugfs_remove_recursive(dd->dfs_node); +} + + /* * Perform any init/resume time hardware setup * @@ -3730,6 +3784,7 @@ skip_create_disk: mtip_hw_sysfs_init(dd, kobj); kobject_put(kobj); } + mtip_hw_debugfs_init(dd); if (dd->mtip_svc_handler) { set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag); @@ -3755,6 +3810,8 @@ start_service_thread: return rv; kthread_run_error: + mtip_hw_debugfs_exit(dd); + /* Delete our gendisk. This also removes the device from /dev */ del_gendisk(dd->disk); @@ -3805,6 +3862,7 @@ static int mtip_block_remove(struct driver_data *dd) kobject_put(kobj); } } + mtip_hw_debugfs_exit(dd); /* * Delete our gendisk structure. This also removes the device @@ -4152,10 +4210,20 @@ static int __init mtip_init(void) } mtip_major = error; + if (!dfs_parent) { + dfs_parent = debugfs_create_dir("rssd", NULL); + if (IS_ERR_OR_NULL(dfs_parent)) { + printk(KERN_WARNING "Error creating debugfs parent\n"); + dfs_parent = NULL; + } + } + /* Register our PCI operations. */ error = pci_register_driver(&mtip_pci_driver); - if (error) + if (error) { + debugfs_remove(dfs_parent); unregister_blkdev(mtip_major, MTIP_DRV_NAME); + } return error; } @@ -4172,6 +4240,8 @@ static int __init mtip_init(void) */ static void __exit mtip_exit(void) { + debugfs_remove_recursive(dfs_parent); + /* Release the allocated major block device number. */ unregister_blkdev(mtip_major, MTIP_DRV_NAME); diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index b2c88da26b2a..f51fc23d17bb 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -26,7 +26,6 @@ #include #include #include -#include /* Offset of Subsystem Device ID in pci confoguration space */ #define PCI_SUBSYSTEM_DEVICEID 0x2E @@ -111,6 +110,8 @@ #define dbg_printk(format, arg...) #endif +#define MTIP_DFS_MAX_BUF_SIZE 1024 + #define __force_bit2int (unsigned int __force) enum { @@ -447,6 +448,8 @@ struct driver_data { unsigned long dd_flag; /* NOTE: use atomic bit operations on this */ struct task_struct *mtip_svc_handler; /* task_struct of svc thd */ + + struct dentry *dfs_node; }; #endif diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 65665c9c42c6..8f428a8ab003 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -499,7 +499,7 @@ static int rbd_header_from_disk(struct rbd_image_header *header, / sizeof (*ondisk)) return -EINVAL; header->snapc = kmalloc(sizeof(struct ceph_snap_context) + - snap_count * sizeof (*ondisk), + snap_count * sizeof(u64), gfp_flags); if (!header->snapc) return -ENOMEM; @@ -977,7 +977,7 @@ static void rbd_req_cb(struct ceph_osd_request *req, struct ceph_msg *msg) op = (void *)(replyhead + 1); rc = le32_to_cpu(replyhead->result); bytes = le64_to_cpu(op->extent.length); - read_op = (le32_to_cpu(op->op) == CEPH_OSD_OP_READ); + read_op = (le16_to_cpu(op->op) == CEPH_OSD_OP_READ); dout("rbd_req_cb bytes=%lld readop=%d rc=%d\n", bytes, read_op, rc); diff --git a/drivers/block/umem.c b/drivers/block/umem.c index aa2712060bfb..9a72277a31df 100644 --- a/drivers/block/umem.c +++ b/drivers/block/umem.c @@ -513,6 +513,44 @@ static void process_page(unsigned long data) } } +struct mm_plug_cb { + struct blk_plug_cb cb; + struct cardinfo *card; +}; + +static void mm_unplug(struct blk_plug_cb *cb) +{ + struct mm_plug_cb *mmcb = container_of(cb, struct mm_plug_cb, cb); + + spin_lock_irq(&mmcb->card->lock); + activate(mmcb->card); + spin_unlock_irq(&mmcb->card->lock); + kfree(mmcb); +} + +static int mm_check_plugged(struct cardinfo *card) +{ + struct blk_plug *plug = current->plug; + struct mm_plug_cb *mmcb; + + if (!plug) + return 0; + + list_for_each_entry(mmcb, &plug->cb_list, cb.list) { + if (mmcb->cb.callback == mm_unplug && mmcb->card == card) + return 1; + } + /* Not currently on the callback list */ + mmcb = kmalloc(sizeof(*mmcb), GFP_ATOMIC); + if (!mmcb) + return 0; + + mmcb->card = card; + mmcb->cb.callback = mm_unplug; + list_add(&mmcb->cb.list, &plug->cb_list); + return 1; +} + static void mm_make_request(struct request_queue *q, struct bio *bio) { struct cardinfo *card = q->queuedata; @@ -523,6 +561,8 @@ static void mm_make_request(struct request_queue *q, struct bio *bio) *card->biotail = bio; bio->bi_next = NULL; card->biotail = &bio->bi_next; + if (bio->bi_rw & REQ_SYNC || !mm_check_plugged(card)) + activate(card); spin_unlock_irq(&card->lock); return; diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h index 773cf27dc23f..9ad3b5ec1dc1 100644 --- a/drivers/block/xen-blkback/common.h +++ b/drivers/block/xen-blkback/common.h @@ -257,6 +257,7 @@ static inline void blkif_get_x86_32_req(struct blkif_request *dst, break; case BLKIF_OP_DISCARD: dst->u.discard.flag = src->u.discard.flag; + dst->u.discard.id = src->u.discard.id; dst->u.discard.sector_number = src->u.discard.sector_number; dst->u.discard.nr_sectors = src->u.discard.nr_sectors; break; @@ -287,6 +288,7 @@ static inline void blkif_get_x86_64_req(struct blkif_request *dst, break; case BLKIF_OP_DISCARD: dst->u.discard.flag = src->u.discard.flag; + dst->u.discard.id = src->u.discard.id; dst->u.discard.sector_number = src->u.discard.sector_number; dst->u.discard.nr_sectors = src->u.discard.nr_sectors; break; diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 60eed4bdd2e4..e4fb3374dcd2 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -141,14 +141,36 @@ static int get_id_from_freelist(struct blkfront_info *info) return free; } -static void add_id_to_freelist(struct blkfront_info *info, +static int add_id_to_freelist(struct blkfront_info *info, unsigned long id) { + if (info->shadow[id].req.u.rw.id != id) + return -EINVAL; + if (info->shadow[id].request == NULL) + return -EINVAL; info->shadow[id].req.u.rw.id = info->shadow_free; info->shadow[id].request = NULL; info->shadow_free = id; + return 0; } +static const char *op_name(int op) +{ + static const char *const names[] = { + [BLKIF_OP_READ] = "read", + [BLKIF_OP_WRITE] = "write", + [BLKIF_OP_WRITE_BARRIER] = "barrier", + [BLKIF_OP_FLUSH_DISKCACHE] = "flush", + [BLKIF_OP_DISCARD] = "discard" }; + + if (op < 0 || op >= ARRAY_SIZE(names)) + return "unknown"; + + if (!names[op]) + return "reserved"; + + return names[op]; +} static int xlbd_reserve_minors(unsigned int minor, unsigned int nr) { unsigned int end = minor + nr; @@ -746,20 +768,36 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id) bret = RING_GET_RESPONSE(&info->ring, i); id = bret->id; + /* + * The backend has messed up and given us an id that we would + * never have given to it (we stamp it up to BLK_RING_SIZE - + * look in get_id_from_freelist. + */ + if (id >= BLK_RING_SIZE) { + WARN(1, "%s: response to %s has incorrect id (%ld)\n", + info->gd->disk_name, op_name(bret->operation), id); + /* We can't safely get the 'struct request' as + * the id is busted. */ + continue; + } req = info->shadow[id].request; if (bret->operation != BLKIF_OP_DISCARD) blkif_completion(&info->shadow[id]); - add_id_to_freelist(info, id); + if (add_id_to_freelist(info, id)) { + WARN(1, "%s: response to %s (id %ld) couldn't be recycled!\n", + info->gd->disk_name, op_name(bret->operation), id); + continue; + } error = (bret->status == BLKIF_RSP_OKAY) ? 0 : -EIO; switch (bret->operation) { case BLKIF_OP_DISCARD: if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) { struct request_queue *rq = info->rq; - printk(KERN_WARNING "blkfront: %s: discard op failed\n", - info->gd->disk_name); + printk(KERN_WARNING "blkfront: %s: %s op failed\n", + info->gd->disk_name, op_name(bret->operation)); error = -EOPNOTSUPP; info->feature_discard = 0; info->feature_secdiscard = 0; @@ -771,18 +809,14 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id) case BLKIF_OP_FLUSH_DISKCACHE: case BLKIF_OP_WRITE_BARRIER: if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) { - printk(KERN_WARNING "blkfront: %s: write %s op failed\n", - info->flush_op == BLKIF_OP_WRITE_BARRIER ? - "barrier" : "flush disk cache", - info->gd->disk_name); + printk(KERN_WARNING "blkfront: %s: %s op failed\n", + info->gd->disk_name, op_name(bret->operation)); error = -EOPNOTSUPP; } if (unlikely(bret->status == BLKIF_RSP_ERROR && info->shadow[id].req.u.rw.nr_segments == 0)) { - printk(KERN_WARNING "blkfront: %s: empty write %s op failed\n", - info->flush_op == BLKIF_OP_WRITE_BARRIER ? - "barrier" : "flush disk cache", - info->gd->disk_name); + printk(KERN_WARNING "blkfront: %s: empty %s op failed\n", + info->gd->disk_name, op_name(bret->operation)); error = -EOPNOTSUPP; } if (unlikely(error)) { diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index ad591bd240ec..10308cd8a7ed 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -63,6 +63,7 @@ static struct usb_device_id ath3k_table[] = { /* Atheros AR3011 with sflash firmware*/ { USB_DEVICE(0x0CF3, 0x3002) }, + { USB_DEVICE(0x0CF3, 0xE019) }, { USB_DEVICE(0x13d3, 0x3304) }, { USB_DEVICE(0x0930, 0x0215) }, { USB_DEVICE(0x0489, 0xE03D) }, @@ -77,6 +78,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x04CA, 0x3005) }, { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, + { USB_DEVICE(0x0930, 0x0219) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -101,6 +103,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h index 94f2d65131c4..27068d149380 100644 --- a/drivers/bluetooth/btmrvl_drv.h +++ b/drivers/bluetooth/btmrvl_drv.h @@ -136,7 +136,7 @@ int btmrvl_remove_card(struct btmrvl_private *priv); void btmrvl_interrupt(struct btmrvl_private *priv); -void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb); +bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb); int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb); int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd); diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c index 681ca9d18e12..dc304def8400 100644 --- a/drivers/bluetooth/btmrvl_main.c +++ b/drivers/bluetooth/btmrvl_main.c @@ -44,23 +44,33 @@ void btmrvl_interrupt(struct btmrvl_private *priv) } EXPORT_SYMBOL_GPL(btmrvl_interrupt); -void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb) +bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb) { struct hci_event_hdr *hdr = (void *) skb->data; struct hci_ev_cmd_complete *ec; - u16 opcode, ocf; + u16 opcode, ocf, ogf; if (hdr->evt == HCI_EV_CMD_COMPLETE) { ec = (void *) (skb->data + HCI_EVENT_HDR_SIZE); opcode = __le16_to_cpu(ec->opcode); ocf = hci_opcode_ocf(opcode); + ogf = hci_opcode_ogf(opcode); + if (ocf == BT_CMD_MODULE_CFG_REQ && priv->btmrvl_dev.sendcmdflag) { priv->btmrvl_dev.sendcmdflag = false; priv->adapter->cmd_complete = true; wake_up_interruptible(&priv->adapter->cmd_wait_q); } + + if (ogf == OGF) { + BT_DBG("vendor event skipped: ogf 0x%4.4x", ogf); + kfree_skb(skb); + return false; + } } + + return true; } EXPORT_SYMBOL_GPL(btmrvl_check_evtpkt); diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index a853244e7fd7..0cd61d9f07cd 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -562,10 +562,12 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv) skb_put(skb, buf_len); skb_pull(skb, SDIO_HEADER_LEN); - if (type == HCI_EVENT_PKT) - btmrvl_check_evtpkt(priv, skb); + if (type == HCI_EVENT_PKT) { + if (btmrvl_check_evtpkt(priv, skb)) + hci_recv_frame(skb); + } else + hci_recv_frame(skb); - hci_recv_frame(skb); hdev->stat.byte_rx += buf_len; break; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index c9463af8e564..83ebb241bfcc 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -125,6 +125,7 @@ static struct usb_device_id blacklist_table[] = { /* Atheros 3011 with sflash firmware */ { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE }, @@ -139,6 +140,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c index f518b99f53f5..731c9046cf7b 100644 --- a/drivers/char/hw_random/atmel-rng.c +++ b/drivers/char/hw_random/atmel-rng.c @@ -34,8 +34,15 @@ static int atmel_trng_read(struct hwrng *rng, void *buf, size_t max, u32 *data = buf; /* data ready? */ - if (readl(trng->base + TRNG_ODATA) & 1) { + if (readl(trng->base + TRNG_ISR) & 1) { *data = readl(trng->base + TRNG_ODATA); + /* + ensure data ready is only set again AFTER the next data + word is ready in case it got set between checking ISR + and reading ODATA, so we don't risk re-reading the + same word + */ + readl(trng->base + TRNG_ISR); return 4; } else return 0; diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 687b00d67c8a..9a1eb0cfa95f 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -850,18 +850,21 @@ static void clk_change_rate(struct clk *clk) { struct clk *child; unsigned long old_rate; + unsigned long best_parent_rate = 0; struct hlist_node *tmp; old_rate = clk->rate; + if (clk->parent) + best_parent_rate = clk->parent->rate; + if (clk->ops->set_rate) - clk->ops->set_rate(clk->hw, clk->new_rate, clk->parent->rate); + clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate); if (clk->ops->recalc_rate) - clk->rate = clk->ops->recalc_rate(clk->hw, - clk->parent->rate); + clk->rate = clk->ops->recalc_rate(clk->hw, best_parent_rate); else - clk->rate = clk->parent->rate; + clk->rate = best_parent_rate; if (clk->notifier_count && old_rate != clk->rate) __clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate); @@ -999,7 +1002,7 @@ static struct clk *__clk_init_parent(struct clk *clk) if (!clk->parents) clk->parents = - kmalloc((sizeof(struct clk*) * clk->num_parents), + kzalloc((sizeof(struct clk*) * clk->num_parents), GFP_KERNEL); if (!clk->parents) @@ -1064,21 +1067,24 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent) old_parent = clk->parent; - /* find index of new parent clock using cached parent ptrs */ - for (i = 0; i < clk->num_parents; i++) - if (clk->parents[i] == parent) - break; + if (!clk->parents) + clk->parents = kzalloc((sizeof(struct clk*) * clk->num_parents), + GFP_KERNEL); /* - * find index of new parent clock using string name comparison - * also try to cache the parent to avoid future calls to __clk_lookup + * find index of new parent clock using cached parent ptrs, + * or if not yet cached, use string name comparison and cache + * them now to avoid future calls to __clk_lookup. */ - if (i == clk->num_parents) - for (i = 0; i < clk->num_parents; i++) - if (!strcmp(clk->parent_names[i], parent->name)) { + for (i = 0; i < clk->num_parents; i++) { + if (clk->parents && clk->parents[i] == parent) + break; + else if (!strcmp(clk->parent_names[i], parent->name)) { + if (clk->parents) clk->parents[i] = __clk_lookup(parent->name); - break; - } + break; + } + } if (i == clk->num_parents) { pr_debug("%s: clock %s is not a possible parent of clock %s\n", diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c index f7be225f544c..db2391c054ee 100644 --- a/drivers/clk/mxs/clk-imx23.c +++ b/drivers/clk/mxs/clk-imx23.c @@ -71,7 +71,7 @@ static void __init clk_misc_init(void) __mxs_setl(30 << BP_FRAC_IOFRAC, FRAC); } -static struct clk_lookup uart_lookups[] __initdata = { +static struct clk_lookup uart_lookups[] = { { .dev_id = "duart", }, { .dev_id = "mxs-auart.0", }, { .dev_id = "mxs-auart.1", }, @@ -80,31 +80,31 @@ static struct clk_lookup uart_lookups[] __initdata = { { .dev_id = "80070000.serial", }, }; -static struct clk_lookup hbus_lookups[] __initdata = { +static struct clk_lookup hbus_lookups[] = { { .dev_id = "imx23-dma-apbh", }, { .dev_id = "80004000.dma-apbh", }, }; -static struct clk_lookup xbus_lookups[] __initdata = { +static struct clk_lookup xbus_lookups[] = { { .dev_id = "duart", .con_id = "apb_pclk"}, { .dev_id = "80070000.serial", .con_id = "apb_pclk"}, { .dev_id = "imx23-dma-apbx", }, { .dev_id = "80024000.dma-apbx", }, }; -static struct clk_lookup ssp_lookups[] __initdata = { +static struct clk_lookup ssp_lookups[] = { { .dev_id = "imx23-mmc.0", }, { .dev_id = "imx23-mmc.1", }, { .dev_id = "80010000.ssp", }, { .dev_id = "80034000.ssp", }, }; -static struct clk_lookup lcdif_lookups[] __initdata = { +static struct clk_lookup lcdif_lookups[] = { { .dev_id = "imx23-fb", }, { .dev_id = "80030000.lcdif", }, }; -static struct clk_lookup gpmi_lookups[] __initdata = { +static struct clk_lookup gpmi_lookups[] = { { .dev_id = "imx23-gpmi-nand", }, { .dev_id = "8000c000.gpmi", }, }; diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c index 2826a2606a29..7fad6c8c13d2 100644 --- a/drivers/clk/mxs/clk-imx28.c +++ b/drivers/clk/mxs/clk-imx28.c @@ -120,7 +120,7 @@ static void __init clk_misc_init(void) writel_relaxed(val, FRAC0); } -static struct clk_lookup uart_lookups[] __initdata = { +static struct clk_lookup uart_lookups[] = { { .dev_id = "duart", }, { .dev_id = "mxs-auart.0", }, { .dev_id = "mxs-auart.1", }, @@ -135,71 +135,71 @@ static struct clk_lookup uart_lookups[] __initdata = { { .dev_id = "80074000.serial", }, }; -static struct clk_lookup hbus_lookups[] __initdata = { +static struct clk_lookup hbus_lookups[] = { { .dev_id = "imx28-dma-apbh", }, { .dev_id = "80004000.dma-apbh", }, }; -static struct clk_lookup xbus_lookups[] __initdata = { +static struct clk_lookup xbus_lookups[] = { { .dev_id = "duart", .con_id = "apb_pclk"}, { .dev_id = "80074000.serial", .con_id = "apb_pclk"}, { .dev_id = "imx28-dma-apbx", }, { .dev_id = "80024000.dma-apbx", }, }; -static struct clk_lookup ssp0_lookups[] __initdata = { +static struct clk_lookup ssp0_lookups[] = { { .dev_id = "imx28-mmc.0", }, { .dev_id = "80010000.ssp", }, }; -static struct clk_lookup ssp1_lookups[] __initdata = { +static struct clk_lookup ssp1_lookups[] = { { .dev_id = "imx28-mmc.1", }, { .dev_id = "80012000.ssp", }, }; -static struct clk_lookup ssp2_lookups[] __initdata = { +static struct clk_lookup ssp2_lookups[] = { { .dev_id = "imx28-mmc.2", }, { .dev_id = "80014000.ssp", }, }; -static struct clk_lookup ssp3_lookups[] __initdata = { +static struct clk_lookup ssp3_lookups[] = { { .dev_id = "imx28-mmc.3", }, { .dev_id = "80016000.ssp", }, }; -static struct clk_lookup lcdif_lookups[] __initdata = { +static struct clk_lookup lcdif_lookups[] = { { .dev_id = "imx28-fb", }, { .dev_id = "80030000.lcdif", }, }; -static struct clk_lookup gpmi_lookups[] __initdata = { +static struct clk_lookup gpmi_lookups[] = { { .dev_id = "imx28-gpmi-nand", }, { .dev_id = "8000c000.gpmi", }, }; -static struct clk_lookup fec_lookups[] __initdata = { +static struct clk_lookup fec_lookups[] = { { .dev_id = "imx28-fec.0", }, { .dev_id = "imx28-fec.1", }, { .dev_id = "800f0000.ethernet", }, { .dev_id = "800f4000.ethernet", }, }; -static struct clk_lookup can0_lookups[] __initdata = { +static struct clk_lookup can0_lookups[] = { { .dev_id = "flexcan.0", }, { .dev_id = "80032000.can", }, }; -static struct clk_lookup can1_lookups[] __initdata = { +static struct clk_lookup can1_lookups[] = { { .dev_id = "flexcan.1", }, { .dev_id = "80034000.can", }, }; -static struct clk_lookup saif0_lookups[] __initdata = { +static struct clk_lookup saif0_lookups[] = { { .dev_id = "mxs-saif.0", }, { .dev_id = "80042000.saif", }, }; -static struct clk_lookup saif1_lookups[] __initdata = { +static struct clk_lookup saif1_lookups[] = { { .dev_id = "mxs-saif.1", }, { .dev_id = "80046000.saif", }, }; @@ -245,8 +245,8 @@ int __init mx28_clocks_init(void) clks[pll2] = mxs_clk_pll("pll2", "ref_xtal", PLL2CTRL0, 23, 50000000); clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll0", FRAC0, 0); clks[ref_emi] = mxs_clk_ref("ref_emi", "pll0", FRAC0, 1); - clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 2); - clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 3); + clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 2); + clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 3); clks[ref_pix] = mxs_clk_ref("ref_pix", "pll0", FRAC1, 0); clks[ref_hsadc] = mxs_clk_ref("ref_hsadc", "pll0", FRAC1, 1); clks[ref_gpmi] = mxs_clk_ref("ref_gpmi", "pll0", FRAC1, 2); diff --git a/drivers/clk/spear/clk-aux-synth.c b/drivers/clk/spear/clk-aux-synth.c index af34074e702b..6756e7c3bc07 100644 --- a/drivers/clk/spear/clk-aux-synth.c +++ b/drivers/clk/spear/clk-aux-synth.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/clk/spear/clk-frac-synth.c b/drivers/clk/spear/clk-frac-synth.c index 4dbdb3fe18e0..958aa3ad1d60 100644 --- a/drivers/clk/spear/clk-frac-synth.c +++ b/drivers/clk/spear/clk-frac-synth.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/clk/spear/clk-gpt-synth.c b/drivers/clk/spear/clk-gpt-synth.c index b471c9762a97..1afc18c4effc 100644 --- a/drivers/clk/spear/clk-gpt-synth.c +++ b/drivers/clk/spear/clk-gpt-synth.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c index dcd4bdf4b0d9..5f1b6badeb15 100644 --- a/drivers/clk/spear/clk-vco-pll.c +++ b/drivers/clk/spear/clk-vco-pll.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c index 376d4e5ff326..7cd63788d546 100644 --- a/drivers/clk/spear/clk.c +++ b/drivers/clk/spear/clk.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h index 3321c46a071c..931737677dfa 100644 --- a/drivers/clk/spear/clk.h +++ b/drivers/clk/spear/clk.h @@ -2,7 +2,7 @@ * Clock framework definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c index 42b68df9aeef..0fcec2aae19c 100644 --- a/drivers/clk/spear/spear1310_clock.c +++ b/drivers/clk/spear/spear1310_clock.c @@ -4,7 +4,7 @@ * SPEAr1310 machine clock framework source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -345,31 +345,30 @@ static struct frac_rate_tbl gen_rtbl[] = { /* clock parents */ static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", }; static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", }; -static const char *uart0_parents[] = { "pll5_clk", "uart_synth_gate_clk", }; -static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", }; -static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk", +static const char *uart0_parents[] = { "pll5_clk", "uart_syn_gclk", }; +static const char *c3_parents[] = { "pll5_clk", "c3_syn_gclk", }; +static const char *gmac_phy_input_parents[] = { "gmii_pad_clk", "pll2_clk", "osc_25m_clk", }; -static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk", - "gmac_phy_synth_gate_clk", }; +static const char *gmac_phy_parents[] = { "phy_input_mclk", "phy_syn_gclk", }; static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", }; -static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", }; +static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_syn_clk", }; static const char *i2s_src_parents[] = { "vco1div2_clk", "none", "pll3_clk", "i2s_src_pad_clk", }; -static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", }; +static const char *i2s_ref_parents[] = { "i2s_src_mclk", "i2s_prs1_clk", }; static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk", "pll3_clk", }; static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk", "pll2_clk", }; static const char *rmii_phy_parents[] = { "ras_tx50_clk", "none", - "ras_pll2_clk", "ras_synth0_clk", }; + "ras_pll2_clk", "ras_syn0_clk", }; static const char *smii_rgmii_phy_parents[] = { "none", "ras_tx125_clk", - "ras_pll2_clk", "ras_synth0_clk", }; -static const char *uart_parents[] = { "ras_apb_clk", "gen_synth3_clk", }; -static const char *i2c_parents[] = { "ras_apb_clk", "gen_synth1_clk", }; -static const char *ssp1_parents[] = { "ras_apb_clk", "gen_synth1_clk", + "ras_pll2_clk", "ras_syn0_clk", }; +static const char *uart_parents[] = { "ras_apb_clk", "gen_syn3_clk", }; +static const char *i2c_parents[] = { "ras_apb_clk", "gen_syn1_clk", }; +static const char *ssp1_parents[] = { "ras_apb_clk", "gen_syn1_clk", "ras_plclk0_clk", }; -static const char *pci_parents[] = { "ras_pll3_clk", "gen_synth2_clk", }; -static const char *tdm_parents[] = { "ras_pll3_clk", "gen_synth1_clk", }; +static const char *pci_parents[] = { "ras_pll3_clk", "gen_syn2_clk", }; +static const char *tdm_parents[] = { "ras_pll3_clk", "gen_syn1_clk", }; void __init spear1310_clk_init(void) { @@ -390,9 +389,9 @@ void __init spear1310_clk_init(void) 25000000); clk_register_clkdev(clk, "osc_25m_clk", NULL); - clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL, - CLK_IS_ROOT, 125000000); - clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL); + clk = clk_register_fixed_rate(NULL, "gmii_pad_clk", NULL, CLK_IS_ROOT, + 125000000); + clk_register_clkdev(clk, "gmii_pad_clk", NULL); clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL, CLK_IS_ROOT, 12288000); @@ -406,34 +405,34 @@ void __init spear1310_clk_init(void) /* clock derived from 24 or 25 MHz osc clk */ /* vco-pll */ - clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents, + clk = clk_register_mux(NULL, "vco1_mclk", vco_parents, ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG, SPEAR1310_PLL1_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "vco1_mux_clk", NULL); - clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mux_clk", + clk_register_clkdev(clk, "vco1_mclk", NULL); + clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mclk", 0, SPEAR1310_PLL1_CTR, SPEAR1310_PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); clk_register_clkdev(clk, "vco1_clk", NULL); clk_register_clkdev(clk1, "pll1_clk", NULL); - clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents, + clk = clk_register_mux(NULL, "vco2_mclk", vco_parents, ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG, SPEAR1310_PLL2_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "vco2_mux_clk", NULL); - clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mux_clk", + clk_register_clkdev(clk, "vco2_mclk", NULL); + clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mclk", 0, SPEAR1310_PLL2_CTR, SPEAR1310_PLL2_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); clk_register_clkdev(clk, "vco2_clk", NULL); clk_register_clkdev(clk1, "pll2_clk", NULL); - clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents, + clk = clk_register_mux(NULL, "vco3_mclk", vco_parents, ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG, SPEAR1310_PLL3_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "vco3_mux_clk", NULL); - clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mux_clk", + clk_register_clkdev(clk, "vco3_mclk", NULL); + clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mclk", 0, SPEAR1310_PLL3_CTR, SPEAR1310_PLL3_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); clk_register_clkdev(clk, "vco3_clk", NULL); @@ -473,7 +472,7 @@ void __init spear1310_clk_init(void) /* peripherals */ clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1, 128); - clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0, + clk = clk_register_gate(NULL, "thermal_gclk", "thermal_clk", 0, SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_THSENS_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "spear_thermal"); @@ -500,177 +499,176 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, "apb_clk", NULL); /* gpt clocks */ - clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents, + clk = clk_register_mux(NULL, "gpt0_mclk", gpt_parents, ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG, SPEAR1310_GPT0_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gpt0_mux_clk", NULL); - clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0, + clk_register_clkdev(clk, "gpt0_mclk", NULL); + clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mclk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT0_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt0"); - clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents, + clk = clk_register_mux(NULL, "gpt1_mclk", gpt_parents, ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG, SPEAR1310_GPT1_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gpt1_mux_clk", NULL); - clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0, + clk_register_clkdev(clk, "gpt1_mclk", NULL); + clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt1"); - clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents, + clk = clk_register_mux(NULL, "gpt2_mclk", gpt_parents, ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG, SPEAR1310_GPT2_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gpt2_mux_clk", NULL); - clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0, + clk_register_clkdev(clk, "gpt2_mclk", NULL); + clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0, SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT2_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt2"); - clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents, + clk = clk_register_mux(NULL, "gpt3_mclk", gpt_parents, ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG, SPEAR1310_GPT3_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gpt3_mux_clk", NULL); - clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0, + clk_register_clkdev(clk, "gpt3_mclk", NULL); + clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mclk", 0, SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT3_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt3"); /* others */ - clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk", - "vco1div2_clk", 0, SPEAR1310_UART_CLK_SYNT, NULL, - aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "uart_synth_clk", NULL); - clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL); + clk = clk_register_aux("uart_syn_clk", "uart_syn_gclk", "vco1div2_clk", + 0, SPEAR1310_UART_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "uart_syn_clk", NULL); + clk_register_clkdev(clk1, "uart_syn_gclk", NULL); - clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents, + clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents, ARRAY_SIZE(uart0_parents), 0, SPEAR1310_PERIP_CLK_CFG, SPEAR1310_UART_CLK_SHIFT, SPEAR1310_UART_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "uart0_mux_clk", NULL); + clk_register_clkdev(clk, "uart0_mclk", NULL); - clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0, + clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UART_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "e0000000.serial"); - clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk", + clk = clk_register_aux("sdhci_syn_clk", "sdhci_syn_gclk", "vco1div2_clk", 0, SPEAR1310_SDHCI_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "sdhci_synth_clk", NULL); - clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL); + clk_register_clkdev(clk, "sdhci_syn_clk", NULL); + clk_register_clkdev(clk1, "sdhci_syn_gclk", NULL); - clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0, + clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SDHCI_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "b3000000.sdhci"); - clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk", - "vco1div2_clk", 0, SPEAR1310_CFXD_CLK_SYNT, NULL, - aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "cfxd_synth_clk", NULL); - clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL); + clk = clk_register_aux("cfxd_syn_clk", "cfxd_syn_gclk", "vco1div2_clk", + 0, SPEAR1310_CFXD_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "cfxd_syn_clk", NULL); + clk_register_clkdev(clk1, "cfxd_syn_gclk", NULL); - clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0, + clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CFXD_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "b2800000.cf"); clk_register_clkdev(clk, NULL, "arasan_xd"); - clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk", - "vco1div2_clk", 0, SPEAR1310_C3_CLK_SYNT, NULL, - aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "c3_synth_clk", NULL); - clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL); + clk = clk_register_aux("c3_syn_clk", "c3_syn_gclk", "vco1div2_clk", + 0, SPEAR1310_C3_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "c3_syn_clk", NULL); + clk_register_clkdev(clk1, "c3_syn_gclk", NULL); - clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents, + clk = clk_register_mux(NULL, "c3_mclk", c3_parents, ARRAY_SIZE(c3_parents), 0, SPEAR1310_PERIP_CLK_CFG, SPEAR1310_C3_CLK_SHIFT, SPEAR1310_C3_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "c3_mux_clk", NULL); + clk_register_clkdev(clk, "c3_mclk", NULL); - clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0, + clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_C3_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "c3"); /* gmac */ - clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk", - gmac_phy_input_parents, + clk = clk_register_mux(NULL, "phy_input_mclk", gmac_phy_input_parents, ARRAY_SIZE(gmac_phy_input_parents), 0, SPEAR1310_GMAC_CLK_CFG, SPEAR1310_GMAC_PHY_INPUT_CLK_SHIFT, SPEAR1310_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL); + clk_register_clkdev(clk, "phy_input_mclk", NULL); - clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk", - "gmac_phy_input_mux_clk", 0, SPEAR1310_GMAC_CLK_SYNT, - NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL); - clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL); + clk = clk_register_aux("phy_syn_clk", "phy_syn_gclk", "phy_input_mclk", + 0, SPEAR1310_GMAC_CLK_SYNT, NULL, gmac_rtbl, + ARRAY_SIZE(gmac_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "phy_syn_clk", NULL); + clk_register_clkdev(clk1, "phy_syn_gclk", NULL); - clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents, + clk = clk_register_mux(NULL, "phy_mclk", gmac_phy_parents, ARRAY_SIZE(gmac_phy_parents), 0, SPEAR1310_PERIP_CLK_CFG, SPEAR1310_GMAC_PHY_CLK_SHIFT, SPEAR1310_GMAC_PHY_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "stmmacphy.0"); /* clcd */ - clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents, + clk = clk_register_mux(NULL, "clcd_syn_mclk", clcd_synth_parents, ARRAY_SIZE(clcd_synth_parents), 0, SPEAR1310_CLCD_CLK_SYNT, SPEAR1310_CLCD_SYNT_CLK_SHIFT, SPEAR1310_CLCD_SYNT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL); + clk_register_clkdev(clk, "clcd_syn_mclk", NULL); - clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0, + clk = clk_register_frac("clcd_syn_clk", "clcd_syn_mclk", 0, SPEAR1310_CLCD_CLK_SYNT, clcd_rtbl, ARRAY_SIZE(clcd_rtbl), &_lock); - clk_register_clkdev(clk, "clcd_synth_clk", NULL); + clk_register_clkdev(clk, "clcd_syn_clk", NULL); - clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents, + clk = clk_register_mux(NULL, "clcd_pixel_mclk", clcd_pixel_parents, ARRAY_SIZE(clcd_pixel_parents), 0, SPEAR1310_PERIP_CLK_CFG, SPEAR1310_CLCD_CLK_SHIFT, SPEAR1310_CLCD_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "clcd_pixel_clk", NULL); - clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0, + clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CLCD_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, "clcd_clk", NULL); /* i2s */ - clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents, + clk = clk_register_mux(NULL, "i2s_src_mclk", i2s_src_parents, ARRAY_SIZE(i2s_src_parents), 0, SPEAR1310_I2S_CLK_CFG, SPEAR1310_I2S_SRC_CLK_SHIFT, SPEAR1310_I2S_SRC_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "i2s_src_clk", NULL); - clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0, + clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", 0, SPEAR1310_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl, ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL); clk_register_clkdev(clk, "i2s_prs1_clk", NULL); - clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents, + clk = clk_register_mux(NULL, "i2s_ref_mclk", i2s_ref_parents, ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1310_I2S_CLK_CFG, SPEAR1310_I2S_REF_SHIFT, SPEAR1310_I2S_REF_SEL_MASK, 0, &_lock); clk_register_clkdev(clk, "i2s_ref_clk", NULL); - clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0, + clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mclk", 0, SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_I2S_REF_PAD_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL); - clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk", + clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gclk", "i2s_ref_pad_clk", 0, SPEAR1310_I2S_CLK_CFG, &i2s_sclk_masks, i2s_sclk_rtbl, ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1); clk_register_clkdev(clk, "i2s_sclk_clk", NULL); - clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL); + clk_register_clkdev(clk1, "i2s_sclk_gclk", NULL); /* clock derived from ahb clk */ clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0, @@ -747,13 +745,13 @@ void __init spear1310_clk_init(void) &_lock); clk_register_clkdev(clk, "sysram1_clk", NULL); - clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk", + clk = clk_register_aux("adc_syn_clk", "adc_syn_gclk", "ahb_clk", 0, SPEAR1310_ADC_CLK_SYNT, NULL, adc_rtbl, ARRAY_SIZE(adc_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "adc_synth_clk", NULL); - clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL); + clk_register_clkdev(clk, "adc_syn_clk", NULL); + clk_register_clkdev(clk1, "adc_syn_gclk", NULL); - clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0, + clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_ADC_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "adc_clk"); @@ -790,37 +788,37 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, NULL, "e0300000.kbd"); /* RAS clks */ - clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk", - gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents), - 0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT0_1_CLK_SHIFT, + clk = clk_register_mux(NULL, "gen_syn0_1_mclk", gen_synth0_1_parents, + ARRAY_SIZE(gen_synth0_1_parents), 0, SPEAR1310_PLL_CFG, + SPEAR1310_RAS_SYNT0_1_CLK_SHIFT, SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gen_synth0_1_clk", NULL); + clk_register_clkdev(clk, "gen_syn0_1_clk", NULL); - clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk", - gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents), - 0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT2_3_CLK_SHIFT, + clk = clk_register_mux(NULL, "gen_syn2_3_mclk", gen_synth2_3_parents, + ARRAY_SIZE(gen_synth2_3_parents), 0, SPEAR1310_PLL_CFG, + SPEAR1310_RAS_SYNT2_3_CLK_SHIFT, SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gen_synth2_3_clk", NULL); + clk_register_clkdev(clk, "gen_syn2_3_clk", NULL); - clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0, + clk = clk_register_frac("gen_syn0_clk", "gen_syn0_1_clk", 0, SPEAR1310_RAS_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); - clk_register_clkdev(clk, "gen_synth0_clk", NULL); + clk_register_clkdev(clk, "gen_syn0_clk", NULL); - clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0, + clk = clk_register_frac("gen_syn1_clk", "gen_syn0_1_clk", 0, SPEAR1310_RAS_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); - clk_register_clkdev(clk, "gen_synth1_clk", NULL); + clk_register_clkdev(clk, "gen_syn1_clk", NULL); - clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0, + clk = clk_register_frac("gen_syn2_clk", "gen_syn2_3_clk", 0, SPEAR1310_RAS_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); - clk_register_clkdev(clk, "gen_synth2_clk", NULL); + clk_register_clkdev(clk, "gen_syn2_clk", NULL); - clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0, + clk = clk_register_frac("gen_syn3_clk", "gen_syn2_3_clk", 0, SPEAR1310_RAS_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); - clk_register_clkdev(clk, "gen_synth3_clk", NULL); + clk_register_clkdev(clk, "gen_syn3_clk", NULL); clk = clk_register_gate(NULL, "ras_osc_24m_clk", "osc_24m_clk", 0, SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_24M_CLK_ENB, 0, @@ -847,7 +845,7 @@ void __init spear1310_clk_init(void) &_lock); clk_register_clkdev(clk, "ras_pll3_clk", NULL); - clk = clk_register_gate(NULL, "ras_tx125_clk", "gmii_125m_pad_clk", 0, + clk = clk_register_gate(NULL, "ras_tx125_clk", "gmii_pad_clk", 0, SPEAR1310_RAS_CLK_ENB, SPEAR1310_C125M_PAD_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, "ras_tx125_clk", NULL); @@ -912,7 +910,7 @@ void __init spear1310_clk_init(void) &_lock); clk_register_clkdev(clk, NULL, "5c700000.eth"); - clk = clk_register_mux(NULL, "smii_rgmii_phy_mux_clk", + clk = clk_register_mux(NULL, "smii_rgmii_phy_mclk", smii_rgmii_phy_parents, ARRAY_SIZE(smii_rgmii_phy_parents), 0, SPEAR1310_RAS_CTRL_REG1, @@ -922,184 +920,184 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, NULL, "stmmacphy.2"); clk_register_clkdev(clk, NULL, "stmmacphy.4"); - clk = clk_register_mux(NULL, "rmii_phy_mux_clk", rmii_phy_parents, + clk = clk_register_mux(NULL, "rmii_phy_mclk", rmii_phy_parents, ARRAY_SIZE(rmii_phy_parents), 0, SPEAR1310_RAS_CTRL_REG1, SPEAR1310_RMII_PHY_CLK_SHIFT, SPEAR1310_PHY_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "stmmacphy.3"); - clk = clk_register_mux(NULL, "uart1_mux_clk", uart_parents, + clk = clk_register_mux(NULL, "uart1_mclk", uart_parents, ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_UART1_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "uart1_mux_clk", NULL); + clk_register_clkdev(clk, "uart1_mclk", NULL); - clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0, + clk = clk_register_gate(NULL, "uart1_clk", "uart1_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "5c800000.serial"); - clk = clk_register_mux(NULL, "uart2_mux_clk", uart_parents, + clk = clk_register_mux(NULL, "uart2_mclk", uart_parents, ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_UART2_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "uart2_mux_clk", NULL); + clk_register_clkdev(clk, "uart2_mclk", NULL); - clk = clk_register_gate(NULL, "uart2_clk", "uart2_mux_clk", 0, + clk = clk_register_gate(NULL, "uart2_clk", "uart2_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART2_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "5c900000.serial"); - clk = clk_register_mux(NULL, "uart3_mux_clk", uart_parents, + clk = clk_register_mux(NULL, "uart3_mclk", uart_parents, ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_UART3_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "uart3_mux_clk", NULL); + clk_register_clkdev(clk, "uart3_mclk", NULL); - clk = clk_register_gate(NULL, "uart3_clk", "uart3_mux_clk", 0, + clk = clk_register_gate(NULL, "uart3_clk", "uart3_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART3_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "5ca00000.serial"); - clk = clk_register_mux(NULL, "uart4_mux_clk", uart_parents, + clk = clk_register_mux(NULL, "uart4_mclk", uart_parents, ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_UART4_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "uart4_mux_clk", NULL); + clk_register_clkdev(clk, "uart4_mclk", NULL); - clk = clk_register_gate(NULL, "uart4_clk", "uart4_mux_clk", 0, + clk = clk_register_gate(NULL, "uart4_clk", "uart4_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART4_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "5cb00000.serial"); - clk = clk_register_mux(NULL, "uart5_mux_clk", uart_parents, + clk = clk_register_mux(NULL, "uart5_mclk", uart_parents, ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_UART5_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "uart5_mux_clk", NULL); + clk_register_clkdev(clk, "uart5_mclk", NULL); - clk = clk_register_gate(NULL, "uart5_clk", "uart5_mux_clk", 0, + clk = clk_register_gate(NULL, "uart5_clk", "uart5_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART5_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "5cc00000.serial"); - clk = clk_register_mux(NULL, "i2c1_mux_clk", i2c_parents, + clk = clk_register_mux(NULL, "i2c1_mclk", i2c_parents, ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_I2C1_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "i2c1_mux_clk", NULL); + clk_register_clkdev(clk, "i2c1_mclk", NULL); - clk = clk_register_gate(NULL, "i2c1_clk", "i2c1_mux_clk", 0, + clk = clk_register_gate(NULL, "i2c1_clk", "i2c1_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "5cd00000.i2c"); - clk = clk_register_mux(NULL, "i2c2_mux_clk", i2c_parents, + clk = clk_register_mux(NULL, "i2c2_mclk", i2c_parents, ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_I2C2_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "i2c2_mux_clk", NULL); + clk_register_clkdev(clk, "i2c2_mclk", NULL); - clk = clk_register_gate(NULL, "i2c2_clk", "i2c2_mux_clk", 0, + clk = clk_register_gate(NULL, "i2c2_clk", "i2c2_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C2_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "5ce00000.i2c"); - clk = clk_register_mux(NULL, "i2c3_mux_clk", i2c_parents, + clk = clk_register_mux(NULL, "i2c3_mclk", i2c_parents, ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_I2C3_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "i2c3_mux_clk", NULL); + clk_register_clkdev(clk, "i2c3_mclk", NULL); - clk = clk_register_gate(NULL, "i2c3_clk", "i2c3_mux_clk", 0, + clk = clk_register_gate(NULL, "i2c3_clk", "i2c3_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C3_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "5cf00000.i2c"); - clk = clk_register_mux(NULL, "i2c4_mux_clk", i2c_parents, + clk = clk_register_mux(NULL, "i2c4_mclk", i2c_parents, ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_I2C4_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "i2c4_mux_clk", NULL); + clk_register_clkdev(clk, "i2c4_mclk", NULL); - clk = clk_register_gate(NULL, "i2c4_clk", "i2c4_mux_clk", 0, + clk = clk_register_gate(NULL, "i2c4_clk", "i2c4_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C4_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "5d000000.i2c"); - clk = clk_register_mux(NULL, "i2c5_mux_clk", i2c_parents, + clk = clk_register_mux(NULL, "i2c5_mclk", i2c_parents, ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_I2C5_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "i2c5_mux_clk", NULL); + clk_register_clkdev(clk, "i2c5_mclk", NULL); - clk = clk_register_gate(NULL, "i2c5_clk", "i2c5_mux_clk", 0, + clk = clk_register_gate(NULL, "i2c5_clk", "i2c5_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C5_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "5d100000.i2c"); - clk = clk_register_mux(NULL, "i2c6_mux_clk", i2c_parents, + clk = clk_register_mux(NULL, "i2c6_mclk", i2c_parents, ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_I2C6_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "i2c6_mux_clk", NULL); + clk_register_clkdev(clk, "i2c6_mclk", NULL); - clk = clk_register_gate(NULL, "i2c6_clk", "i2c6_mux_clk", 0, + clk = clk_register_gate(NULL, "i2c6_clk", "i2c6_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C6_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "5d200000.i2c"); - clk = clk_register_mux(NULL, "i2c7_mux_clk", i2c_parents, + clk = clk_register_mux(NULL, "i2c7_mclk", i2c_parents, ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_I2C7_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "i2c7_mux_clk", NULL); + clk_register_clkdev(clk, "i2c7_mclk", NULL); - clk = clk_register_gate(NULL, "i2c7_clk", "i2c7_mux_clk", 0, + clk = clk_register_gate(NULL, "i2c7_clk", "i2c7_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C7_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "5d300000.i2c"); - clk = clk_register_mux(NULL, "ssp1_mux_clk", ssp1_parents, + clk = clk_register_mux(NULL, "ssp1_mclk", ssp1_parents, ARRAY_SIZE(ssp1_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_SSP1_CLK_SHIFT, SPEAR1310_SSP1_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "ssp1_mux_clk", NULL); + clk_register_clkdev(clk, "ssp1_mclk", NULL); - clk = clk_register_gate(NULL, "ssp1_clk", "ssp1_mux_clk", 0, + clk = clk_register_gate(NULL, "ssp1_clk", "ssp1_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_SSP1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "5d400000.spi"); - clk = clk_register_mux(NULL, "pci_mux_clk", pci_parents, + clk = clk_register_mux(NULL, "pci_mclk", pci_parents, ARRAY_SIZE(pci_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_PCI_CLK_SHIFT, SPEAR1310_PCI_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "pci_mux_clk", NULL); + clk_register_clkdev(clk, "pci_mclk", NULL); - clk = clk_register_gate(NULL, "pci_clk", "pci_mux_clk", 0, + clk = clk_register_gate(NULL, "pci_clk", "pci_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_PCI_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "pci"); - clk = clk_register_mux(NULL, "tdm1_mux_clk", tdm_parents, + clk = clk_register_mux(NULL, "tdm1_mclk", tdm_parents, ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_TDM1_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "tdm1_mux_clk", NULL); + clk_register_clkdev(clk, "tdm1_mclk", NULL); - clk = clk_register_gate(NULL, "tdm1_clk", "tdm1_mux_clk", 0, + clk = clk_register_gate(NULL, "tdm1_clk", "tdm1_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "tdm_hdlc.0"); - clk = clk_register_mux(NULL, "tdm2_mux_clk", tdm_parents, + clk = clk_register_mux(NULL, "tdm2_mclk", tdm_parents, ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0, SPEAR1310_TDM2_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "tdm2_mux_clk", NULL); + clk_register_clkdev(clk, "tdm2_mclk", NULL); - clk = clk_register_gate(NULL, "tdm2_clk", "tdm2_mux_clk", 0, + clk = clk_register_gate(NULL, "tdm2_clk", "tdm2_mclk", 0, SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM2_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "tdm_hdlc.1"); diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c index f130919d5bf8..2352cee7f645 100644 --- a/drivers/clk/spear/spear1340_clock.c +++ b/drivers/clk/spear/spear1340_clock.c @@ -4,7 +4,7 @@ * SPEAr1340 machine clock framework source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -369,27 +369,25 @@ static struct frac_rate_tbl gen_rtbl[] = { /* clock parents */ static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", }; -static const char *sys_parents[] = { "none", "pll1_clk", "none", "none", - "sys_synth_clk", "none", "pll2_clk", "pll3_clk", }; -static const char *ahb_parents[] = { "cpu_div3_clk", "amba_synth_clk", }; +static const char *sys_parents[] = { "pll1_clk", "pll1_clk", "pll1_clk", + "pll1_clk", "sys_synth_clk", "sys_synth_clk", "pll2_clk", "pll3_clk", }; +static const char *ahb_parents[] = { "cpu_div3_clk", "amba_syn_clk", }; static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", }; static const char *uart0_parents[] = { "pll5_clk", "osc_24m_clk", - "uart0_synth_gate_clk", }; + "uart0_syn_gclk", }; static const char *uart1_parents[] = { "pll5_clk", "osc_24m_clk", - "uart1_synth_gate_clk", }; -static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", }; -static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk", + "uart1_syn_gclk", }; +static const char *c3_parents[] = { "pll5_clk", "c3_syn_gclk", }; +static const char *gmac_phy_input_parents[] = { "gmii_pad_clk", "pll2_clk", "osc_25m_clk", }; -static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk", - "gmac_phy_synth_gate_clk", }; +static const char *gmac_phy_parents[] = { "phy_input_mclk", "phy_syn_gclk", }; static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", }; -static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", }; +static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_syn_clk", }; static const char *i2s_src_parents[] = { "vco1div2_clk", "pll2_clk", "pll3_clk", "i2s_src_pad_clk", }; -static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", }; -static const char *spdif_out_parents[] = { "i2s_src_pad_clk", "gen_synth2_clk", -}; -static const char *spdif_in_parents[] = { "pll2_clk", "gen_synth3_clk", }; +static const char *i2s_ref_parents[] = { "i2s_src_mclk", "i2s_prs1_clk", }; +static const char *spdif_out_parents[] = { "i2s_src_pad_clk", "gen_syn2_clk", }; +static const char *spdif_in_parents[] = { "pll2_clk", "gen_syn3_clk", }; static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk", "pll3_clk", }; @@ -415,9 +413,9 @@ void __init spear1340_clk_init(void) 25000000); clk_register_clkdev(clk, "osc_25m_clk", NULL); - clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL, - CLK_IS_ROOT, 125000000); - clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL); + clk = clk_register_fixed_rate(NULL, "gmii_pad_clk", NULL, CLK_IS_ROOT, + 125000000); + clk_register_clkdev(clk, "gmii_pad_clk", NULL); clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL, CLK_IS_ROOT, 12288000); @@ -431,35 +429,35 @@ void __init spear1340_clk_init(void) /* clock derived from 24 or 25 MHz osc clk */ /* vco-pll */ - clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents, + clk = clk_register_mux(NULL, "vco1_mclk", vco_parents, ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG, SPEAR1340_PLL1_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "vco1_mux_clk", NULL); - clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mux_clk", - 0, SPEAR1340_PLL1_CTR, SPEAR1340_PLL1_FRQ, pll_rtbl, + clk_register_clkdev(clk, "vco1_mclk", NULL); + clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mclk", 0, + SPEAR1340_PLL1_CTR, SPEAR1340_PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); clk_register_clkdev(clk, "vco1_clk", NULL); clk_register_clkdev(clk1, "pll1_clk", NULL); - clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents, + clk = clk_register_mux(NULL, "vco2_mclk", vco_parents, ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG, SPEAR1340_PLL2_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "vco2_mux_clk", NULL); - clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mux_clk", - 0, SPEAR1340_PLL2_CTR, SPEAR1340_PLL2_FRQ, pll_rtbl, + clk_register_clkdev(clk, "vco2_mclk", NULL); + clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mclk", 0, + SPEAR1340_PLL2_CTR, SPEAR1340_PLL2_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); clk_register_clkdev(clk, "vco2_clk", NULL); clk_register_clkdev(clk1, "pll2_clk", NULL); - clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents, + clk = clk_register_mux(NULL, "vco3_mclk", vco_parents, ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG, SPEAR1340_PLL3_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "vco3_mux_clk", NULL); - clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mux_clk", - 0, SPEAR1340_PLL3_CTR, SPEAR1340_PLL3_FRQ, pll_rtbl, + clk_register_clkdev(clk, "vco3_mclk", NULL); + clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mclk", 0, + SPEAR1340_PLL3_CTR, SPEAR1340_PLL3_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); clk_register_clkdev(clk, "vco3_clk", NULL); clk_register_clkdev(clk1, "pll3_clk", NULL); @@ -498,7 +496,7 @@ void __init spear1340_clk_init(void) /* peripherals */ clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1, 128); - clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0, + clk = clk_register_gate(NULL, "thermal_gclk", "thermal_clk", 0, SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_THSENS_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "spear_thermal"); @@ -509,23 +507,23 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk, "ddr_clk", NULL); /* clock derived from pll1 clk */ - clk = clk_register_frac("sys_synth_clk", "vco1div2_clk", 0, + clk = clk_register_frac("sys_syn_clk", "vco1div2_clk", 0, SPEAR1340_SYS_CLK_SYNT, sys_synth_rtbl, ARRAY_SIZE(sys_synth_rtbl), &_lock); - clk_register_clkdev(clk, "sys_synth_clk", NULL); + clk_register_clkdev(clk, "sys_syn_clk", NULL); - clk = clk_register_frac("amba_synth_clk", "vco1div2_clk", 0, + clk = clk_register_frac("amba_syn_clk", "vco1div2_clk", 0, SPEAR1340_AMBA_CLK_SYNT, amba_synth_rtbl, ARRAY_SIZE(amba_synth_rtbl), &_lock); - clk_register_clkdev(clk, "amba_synth_clk", NULL); + clk_register_clkdev(clk, "amba_syn_clk", NULL); - clk = clk_register_mux(NULL, "sys_mux_clk", sys_parents, + clk = clk_register_mux(NULL, "sys_mclk", sys_parents, ARRAY_SIZE(sys_parents), 0, SPEAR1340_SYS_CLK_CTRL, SPEAR1340_SCLK_SRC_SEL_SHIFT, SPEAR1340_SCLK_SRC_SEL_MASK, 0, &_lock); clk_register_clkdev(clk, "sys_clk", NULL); - clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mux_clk", 0, 1, + clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mclk", 0, 1, 2); clk_register_clkdev(clk, "cpu_clk", NULL); @@ -548,194 +546,193 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk, "apb_clk", NULL); /* gpt clocks */ - clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents, + clk = clk_register_mux(NULL, "gpt0_mclk", gpt_parents, ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GPT0_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gpt0_mux_clk", NULL); - clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0, + clk_register_clkdev(clk, "gpt0_mclk", NULL); + clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mclk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT0_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt0"); - clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents, + clk = clk_register_mux(NULL, "gpt1_mclk", gpt_parents, ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GPT1_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gpt1_mux_clk", NULL); - clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0, + clk_register_clkdev(clk, "gpt1_mclk", NULL); + clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt1"); - clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents, + clk = clk_register_mux(NULL, "gpt2_mclk", gpt_parents, ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GPT2_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gpt2_mux_clk", NULL); - clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0, + clk_register_clkdev(clk, "gpt2_mclk", NULL); + clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0, SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT2_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt2"); - clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents, + clk = clk_register_mux(NULL, "gpt3_mclk", gpt_parents, ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GPT3_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gpt3_mux_clk", NULL); - clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0, + clk_register_clkdev(clk, "gpt3_mclk", NULL); + clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mclk", 0, SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT3_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt3"); /* others */ - clk = clk_register_aux("uart0_synth_clk", "uart0_synth_gate_clk", + clk = clk_register_aux("uart0_syn_clk", "uart0_syn_gclk", "vco1div2_clk", 0, SPEAR1340_UART0_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "uart0_synth_clk", NULL); - clk_register_clkdev(clk1, "uart0_synth_gate_clk", NULL); + clk_register_clkdev(clk, "uart0_syn_clk", NULL); + clk_register_clkdev(clk1, "uart0_syn_gclk", NULL); - clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents, + clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents, ARRAY_SIZE(uart0_parents), 0, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_UART0_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "uart0_mux_clk", NULL); + clk_register_clkdev(clk, "uart0_mclk", NULL); - clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0, + clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART0_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "e0000000.serial"); - clk = clk_register_aux("uart1_synth_clk", "uart1_synth_gate_clk", + clk = clk_register_aux("uart1_syn_clk", "uart1_syn_gclk", "vco1div2_clk", 0, SPEAR1340_UART1_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "uart1_synth_clk", NULL); - clk_register_clkdev(clk1, "uart1_synth_gate_clk", NULL); + clk_register_clkdev(clk, "uart1_syn_clk", NULL); + clk_register_clkdev(clk1, "uart1_syn_gclk", NULL); - clk = clk_register_mux(NULL, "uart1_mux_clk", uart1_parents, + clk = clk_register_mux(NULL, "uart1_mclk", uart1_parents, ARRAY_SIZE(uart1_parents), 0, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_UART1_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "uart1_mux_clk", NULL); + clk_register_clkdev(clk, "uart1_mclk", NULL); - clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0, - SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART1_CLK_ENB, 0, + clk = clk_register_gate(NULL, "uart1_clk", "uart1_mclk", 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_UART1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "b4100000.serial"); - clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk", + clk = clk_register_aux("sdhci_syn_clk", "sdhci_syn_gclk", "vco1div2_clk", 0, SPEAR1340_SDHCI_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "sdhci_synth_clk", NULL); - clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL); + clk_register_clkdev(clk, "sdhci_syn_clk", NULL); + clk_register_clkdev(clk1, "sdhci_syn_gclk", NULL); - clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0, + clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SDHCI_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "b3000000.sdhci"); - clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk", - "vco1div2_clk", 0, SPEAR1340_CFXD_CLK_SYNT, NULL, - aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "cfxd_synth_clk", NULL); - clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL); + clk = clk_register_aux("cfxd_syn_clk", "cfxd_syn_gclk", "vco1div2_clk", + 0, SPEAR1340_CFXD_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "cfxd_syn_clk", NULL); + clk_register_clkdev(clk1, "cfxd_syn_gclk", NULL); - clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0, + clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CFXD_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "b2800000.cf"); clk_register_clkdev(clk, NULL, "arasan_xd"); - clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk", - "vco1div2_clk", 0, SPEAR1340_C3_CLK_SYNT, NULL, - aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "c3_synth_clk", NULL); - clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL); + clk = clk_register_aux("c3_syn_clk", "c3_syn_gclk", "vco1div2_clk", 0, + SPEAR1340_C3_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "c3_syn_clk", NULL); + clk_register_clkdev(clk1, "c3_syn_gclk", NULL); - clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents, + clk = clk_register_mux(NULL, "c3_mclk", c3_parents, ARRAY_SIZE(c3_parents), 0, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_C3_CLK_SHIFT, SPEAR1340_C3_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "c3_mux_clk", NULL); + clk_register_clkdev(clk, "c3_mclk", NULL); - clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0, + clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_C3_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "c3"); /* gmac */ - clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk", - gmac_phy_input_parents, + clk = clk_register_mux(NULL, "phy_input_mclk", gmac_phy_input_parents, ARRAY_SIZE(gmac_phy_input_parents), 0, SPEAR1340_GMAC_CLK_CFG, SPEAR1340_GMAC_PHY_INPUT_CLK_SHIFT, SPEAR1340_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL); + clk_register_clkdev(clk, "phy_input_mclk", NULL); - clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk", - "gmac_phy_input_mux_clk", 0, SPEAR1340_GMAC_CLK_SYNT, - NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL); - clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL); + clk = clk_register_aux("phy_syn_clk", "phy_syn_gclk", "phy_input_mclk", + 0, SPEAR1340_GMAC_CLK_SYNT, NULL, gmac_rtbl, + ARRAY_SIZE(gmac_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "phy_syn_clk", NULL); + clk_register_clkdev(clk1, "phy_syn_gclk", NULL); - clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents, + clk = clk_register_mux(NULL, "phy_mclk", gmac_phy_parents, ARRAY_SIZE(gmac_phy_parents), 0, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GMAC_PHY_CLK_SHIFT, SPEAR1340_GMAC_PHY_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "stmmacphy.0"); /* clcd */ - clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents, + clk = clk_register_mux(NULL, "clcd_syn_mclk", clcd_synth_parents, ARRAY_SIZE(clcd_synth_parents), 0, SPEAR1340_CLCD_CLK_SYNT, SPEAR1340_CLCD_SYNT_CLK_SHIFT, SPEAR1340_CLCD_SYNT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL); + clk_register_clkdev(clk, "clcd_syn_mclk", NULL); - clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0, + clk = clk_register_frac("clcd_syn_clk", "clcd_syn_mclk", 0, SPEAR1340_CLCD_CLK_SYNT, clcd_rtbl, ARRAY_SIZE(clcd_rtbl), &_lock); - clk_register_clkdev(clk, "clcd_synth_clk", NULL); + clk_register_clkdev(clk, "clcd_syn_clk", NULL); - clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents, + clk = clk_register_mux(NULL, "clcd_pixel_mclk", clcd_pixel_parents, ARRAY_SIZE(clcd_pixel_parents), 0, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_CLCD_CLK_SHIFT, SPEAR1340_CLCD_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "clcd_pixel_clk", NULL); - clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0, + clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CLCD_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, "clcd_clk", NULL); /* i2s */ - clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents, + clk = clk_register_mux(NULL, "i2s_src_mclk", i2s_src_parents, ARRAY_SIZE(i2s_src_parents), 0, SPEAR1340_I2S_CLK_CFG, SPEAR1340_I2S_SRC_CLK_SHIFT, SPEAR1340_I2S_SRC_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "i2s_src_clk", NULL); - clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0, + clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", 0, SPEAR1340_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl, ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL); clk_register_clkdev(clk, "i2s_prs1_clk", NULL); - clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents, + clk = clk_register_mux(NULL, "i2s_ref_mclk", i2s_ref_parents, ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1340_I2S_CLK_CFG, SPEAR1340_I2S_REF_SHIFT, SPEAR1340_I2S_REF_SEL_MASK, 0, &_lock); clk_register_clkdev(clk, "i2s_ref_clk", NULL); - clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0, + clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mclk", 0, SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_I2S_REF_PAD_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL); - clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk", - "i2s_ref_mux_clk", 0, SPEAR1340_I2S_CLK_CFG, - &i2s_sclk_masks, i2s_sclk_rtbl, - ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1); + clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gclk", "i2s_ref_mclk", + 0, SPEAR1340_I2S_CLK_CFG, &i2s_sclk_masks, + i2s_sclk_rtbl, ARRAY_SIZE(i2s_sclk_rtbl), &_lock, + &clk1); clk_register_clkdev(clk, "i2s_sclk_clk", NULL); - clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL); + clk_register_clkdev(clk1, "i2s_sclk_gclk", NULL); /* clock derived from ahb clk */ clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0, @@ -744,7 +741,7 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk, NULL, "e0280000.i2c"); clk = clk_register_gate(NULL, "i2c1_clk", "ahb_clk", 0, - SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2C1_CLK_ENB, 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_I2C1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "b4000000.i2c"); @@ -800,13 +797,13 @@ void __init spear1340_clk_init(void) &_lock); clk_register_clkdev(clk, "sysram1_clk", NULL); - clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk", + clk = clk_register_aux("adc_syn_clk", "adc_syn_gclk", "ahb_clk", 0, SPEAR1340_ADC_CLK_SYNT, NULL, adc_rtbl, ARRAY_SIZE(adc_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "adc_synth_clk", NULL); - clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL); + clk_register_clkdev(clk, "adc_syn_clk", NULL); + clk_register_clkdev(clk1, "adc_syn_gclk", NULL); - clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0, + clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_ADC_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "adc_clk"); @@ -843,39 +840,39 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk, NULL, "e0300000.kbd"); /* RAS clks */ - clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk", - gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents), - 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT0_1_CLK_SHIFT, + clk = clk_register_mux(NULL, "gen_syn0_1_mclk", gen_synth0_1_parents, + ARRAY_SIZE(gen_synth0_1_parents), 0, SPEAR1340_PLL_CFG, + SPEAR1340_GEN_SYNT0_1_CLK_SHIFT, SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gen_synth0_1_clk", NULL); + clk_register_clkdev(clk, "gen_syn0_1_clk", NULL); - clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk", - gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents), - 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT2_3_CLK_SHIFT, + clk = clk_register_mux(NULL, "gen_syn2_3_mclk", gen_synth2_3_parents, + ARRAY_SIZE(gen_synth2_3_parents), 0, SPEAR1340_PLL_CFG, + SPEAR1340_GEN_SYNT2_3_CLK_SHIFT, SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gen_synth2_3_clk", NULL); + clk_register_clkdev(clk, "gen_syn2_3_clk", NULL); - clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0, + clk = clk_register_frac("gen_syn0_clk", "gen_syn0_1_clk", 0, SPEAR1340_GEN_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); - clk_register_clkdev(clk, "gen_synth0_clk", NULL); + clk_register_clkdev(clk, "gen_syn0_clk", NULL); - clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0, + clk = clk_register_frac("gen_syn1_clk", "gen_syn0_1_clk", 0, SPEAR1340_GEN_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); - clk_register_clkdev(clk, "gen_synth1_clk", NULL); + clk_register_clkdev(clk, "gen_syn1_clk", NULL); - clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0, + clk = clk_register_frac("gen_syn2_clk", "gen_syn2_3_clk", 0, SPEAR1340_GEN_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); - clk_register_clkdev(clk, "gen_synth2_clk", NULL); + clk_register_clkdev(clk, "gen_syn2_clk", NULL); - clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0, + clk = clk_register_frac("gen_syn3_clk", "gen_syn2_3_clk", 0, SPEAR1340_GEN_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); - clk_register_clkdev(clk, "gen_synth3_clk", NULL); + clk_register_clkdev(clk, "gen_syn3_clk", NULL); - clk = clk_register_gate(NULL, "mali_clk", "gen_synth3_clk", 0, + clk = clk_register_gate(NULL, "mali_clk", "gen_syn3_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_MALI_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "mali"); @@ -890,74 +887,74 @@ void __init spear1340_clk_init(void) &_lock); clk_register_clkdev(clk, NULL, "spear_cec.1"); - clk = clk_register_mux(NULL, "spdif_out_mux_clk", spdif_out_parents, + clk = clk_register_mux(NULL, "spdif_out_mclk", spdif_out_parents, ARRAY_SIZE(spdif_out_parents), 0, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_OUT_CLK_SHIFT, SPEAR1340_SPDIF_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "spdif_out_mux_clk", NULL); + clk_register_clkdev(clk, "spdif_out_mclk", NULL); - clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mux_clk", 0, + clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_OUT_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "spdif-out"); - clk = clk_register_mux(NULL, "spdif_in_mux_clk", spdif_in_parents, + clk = clk_register_mux(NULL, "spdif_in_mclk", spdif_in_parents, ARRAY_SIZE(spdif_in_parents), 0, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_IN_CLK_SHIFT, SPEAR1340_SPDIF_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "spdif_in_mux_clk", NULL); + clk_register_clkdev(clk, "spdif_in_mclk", NULL); - clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mux_clk", 0, + clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_IN_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "spdif-in"); - clk = clk_register_gate(NULL, "acp_clk", "acp_mux_clk", 0, + clk = clk_register_gate(NULL, "acp_clk", "acp_mclk", 0, SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "acp_clk"); - clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mux_clk", 0, + clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "plgpio"); - clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mux_clk", 0, + clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "video_dec"); - clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mux_clk", 0, + clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "video_enc"); - clk = clk_register_gate(NULL, "video_in_clk", "video_in_mux_clk", 0, + clk = clk_register_gate(NULL, "video_in_clk", "video_in_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "spear_vip"); - clk = clk_register_gate(NULL, "cam0_clk", "cam0_mux_clk", 0, + clk = clk_register_gate(NULL, "cam0_clk", "cam0_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "spear_camif.0"); - clk = clk_register_gate(NULL, "cam1_clk", "cam1_mux_clk", 0, + clk = clk_register_gate(NULL, "cam1_clk", "cam1_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "spear_camif.1"); - clk = clk_register_gate(NULL, "cam2_clk", "cam2_mux_clk", 0, + clk = clk_register_gate(NULL, "cam2_clk", "cam2_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "spear_camif.2"); - clk = clk_register_gate(NULL, "cam3_clk", "cam3_mux_clk", 0, + clk = clk_register_gate(NULL, "cam3_clk", "cam3_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "spear_camif.3"); - clk = clk_register_gate(NULL, "pwm_clk", "pwm_mux_clk", 0, + clk = clk_register_gate(NULL, "pwm_clk", "pwm_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PWM_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "pwm"); diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index 440bb3e4c971..c3157454bb3f 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -2,7 +2,7 @@ * SPEAr3xx machines clock framework source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -122,12 +122,12 @@ static struct gpt_rate_tbl gpt_rtbl[] = { }; /* clock parents */ -static const char *uart0_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", }; -static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk", +static const char *uart0_parents[] = { "pll3_clk", "uart_syn_gclk", }; +static const char *firda_parents[] = { "pll3_clk", "firda_syn_gclk", }; -static const char *gpt0_parents[] = { "pll3_48m_clk", "gpt0_synth_clk", }; -static const char *gpt1_parents[] = { "pll3_48m_clk", "gpt1_synth_clk", }; -static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", }; +static const char *gpt0_parents[] = { "pll3_clk", "gpt0_syn_clk", }; +static const char *gpt1_parents[] = { "pll3_clk", "gpt1_syn_clk", }; +static const char *gpt2_parents[] = { "pll3_clk", "gpt2_syn_clk", }; static const char *gen2_3_parents[] = { "pll1_clk", "pll2_clk", }; static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none", "pll2_clk", }; @@ -137,7 +137,7 @@ static void __init spear300_clk_init(void) { struct clk *clk; - clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0, + clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_clk", 0, 1, 1); clk_register_clkdev(clk, NULL, "60000000.clcd"); @@ -219,15 +219,11 @@ static void __init spear310_clk_init(void) #define SPEAR320_UARTX_PCLK_VAL_SYNTH1 0x0 #define SPEAR320_UARTX_PCLK_VAL_APB 0x1 -static const char *i2s_ref_parents[] = { "ras_pll2_clk", - "ras_gen2_synth_gate_clk", }; -static const char *sdhci_parents[] = { "ras_pll3_48m_clk", - "ras_gen3_synth_gate_clk", -}; +static const char *i2s_ref_parents[] = { "ras_pll2_clk", "ras_syn2_gclk", }; +static const char *sdhci_parents[] = { "ras_pll3_clk", "ras_syn3_gclk", }; static const char *smii0_parents[] = { "smii_125m_pad", "ras_pll2_clk", - "ras_gen0_synth_gate_clk", }; -static const char *uartx_parents[] = { "ras_gen1_synth_gate_clk", "ras_apb_clk", -}; + "ras_syn0_gclk", }; +static const char *uartx_parents[] = { "ras_syn1_gclk", "ras_apb_clk", }; static void __init spear320_clk_init(void) { @@ -237,7 +233,7 @@ static void __init spear320_clk_init(void) CLK_IS_ROOT, 125000000); clk_register_clkdev(clk, "smii_125m_pad", NULL); - clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0, + clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_clk", 0, 1, 1); clk_register_clkdev(clk, NULL, "90000000.clcd"); @@ -363,9 +359,9 @@ void __init spear3xx_clk_init(void) clk_register_clkdev(clk, NULL, "fc900000.rtc"); /* clock derived from 24 MHz osc clk */ - clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0, + clk = clk_register_fixed_rate(NULL, "pll3_clk", "osc_24m_clk", 0, 48000000); - clk_register_clkdev(clk, "pll3_48m_clk", NULL); + clk_register_clkdev(clk, "pll3_clk", NULL); clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_24m_clk", 0, 1, 1); @@ -392,98 +388,98 @@ void __init spear3xx_clk_init(void) HCLK_RATIO_MASK, 0, &_lock); clk_register_clkdev(clk, "ahb_clk", NULL); - clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk", - "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl, - ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "uart_synth_clk", NULL); - clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL); + clk = clk_register_aux("uart_syn_clk", "uart_syn_gclk", "pll1_clk", 0, + UART_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), + &_lock, &clk1); + clk_register_clkdev(clk, "uart_syn_clk", NULL); + clk_register_clkdev(clk1, "uart_syn_gclk", NULL); - clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents, + clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents, ARRAY_SIZE(uart0_parents), 0, PERIP_CLK_CFG, UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "uart0_mux_clk", NULL); + clk_register_clkdev(clk, "uart0_mclk", NULL); - clk = clk_register_gate(NULL, "uart0", "uart0_mux_clk", 0, - PERIP1_CLK_ENB, UART_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "uart0", "uart0_mclk", 0, PERIP1_CLK_ENB, + UART_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "d0000000.serial"); - clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk", - "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl, - ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "firda_synth_clk", NULL); - clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL); + clk = clk_register_aux("firda_syn_clk", "firda_syn_gclk", "pll1_clk", 0, + FIRDA_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), + &_lock, &clk1); + clk_register_clkdev(clk, "firda_syn_clk", NULL); + clk_register_clkdev(clk1, "firda_syn_gclk", NULL); - clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents, + clk = clk_register_mux(NULL, "firda_mclk", firda_parents, ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG, FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "firda_mux_clk", NULL); + clk_register_clkdev(clk, "firda_mclk", NULL); - clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0, + clk = clk_register_gate(NULL, "firda_clk", "firda_mclk", 0, PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "firda"); /* gpt clocks */ - clk_register_gpt("gpt0_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG, - gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); + clk_register_gpt("gpt0_syn_clk", "pll1_clk", 0, PRSC0_CLK_CFG, gpt_rtbl, + ARRAY_SIZE(gpt_rtbl), &_lock); clk = clk_register_mux(NULL, "gpt0_clk", gpt0_parents, ARRAY_SIZE(gpt0_parents), 0, PERIP_CLK_CFG, GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt0"); - clk_register_gpt("gpt1_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG, - gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); - clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt1_parents, + clk_register_gpt("gpt1_syn_clk", "pll1_clk", 0, PRSC1_CLK_CFG, gpt_rtbl, + ARRAY_SIZE(gpt_rtbl), &_lock); + clk = clk_register_mux(NULL, "gpt1_mclk", gpt1_parents, ARRAY_SIZE(gpt1_parents), 0, PERIP_CLK_CFG, GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gpt1_mux_clk", NULL); - clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0, + clk_register_clkdev(clk, "gpt1_mclk", NULL); + clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0, PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt1"); - clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG, - gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); - clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents, + clk_register_gpt("gpt2_syn_clk", "pll1_clk", 0, PRSC2_CLK_CFG, gpt_rtbl, + ARRAY_SIZE(gpt_rtbl), &_lock); + clk = clk_register_mux(NULL, "gpt2_mclk", gpt2_parents, ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG, GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gpt2_mux_clk", NULL); - clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0, + clk_register_clkdev(clk, "gpt2_mclk", NULL); + clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0, PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt2"); /* general synths clocks */ - clk = clk_register_aux("gen0_synth_clk", "gen0_synth_gate_clk", - "pll1_clk", 0, GEN0_CLK_SYNT, NULL, aux_rtbl, - ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "gen0_synth_clk", NULL); - clk_register_clkdev(clk1, "gen0_synth_gate_clk", NULL); + clk = clk_register_aux("gen0_syn_clk", "gen0_syn_gclk", "pll1_clk", + 0, GEN0_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), + &_lock, &clk1); + clk_register_clkdev(clk, "gen0_syn_clk", NULL); + clk_register_clkdev(clk1, "gen0_syn_gclk", NULL); - clk = clk_register_aux("gen1_synth_clk", "gen1_synth_gate_clk", - "pll1_clk", 0, GEN1_CLK_SYNT, NULL, aux_rtbl, - ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "gen1_synth_clk", NULL); - clk_register_clkdev(clk1, "gen1_synth_gate_clk", NULL); + clk = clk_register_aux("gen1_syn_clk", "gen1_syn_gclk", "pll1_clk", + 0, GEN1_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), + &_lock, &clk1); + clk_register_clkdev(clk, "gen1_syn_clk", NULL); + clk_register_clkdev(clk1, "gen1_syn_gclk", NULL); - clk = clk_register_mux(NULL, "gen2_3_parent_clk", gen2_3_parents, + clk = clk_register_mux(NULL, "gen2_3_par_clk", gen2_3_parents, ARRAY_SIZE(gen2_3_parents), 0, CORE_CLK_CFG, GEN_SYNTH2_3_CLK_SHIFT, GEN_SYNTH2_3_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gen2_3_parent_clk", NULL); + clk_register_clkdev(clk, "gen2_3_par_clk", NULL); - clk = clk_register_aux("gen2_synth_clk", "gen2_synth_gate_clk", - "gen2_3_parent_clk", 0, GEN2_CLK_SYNT, NULL, aux_rtbl, + clk = clk_register_aux("gen2_syn_clk", "gen2_syn_gclk", + "gen2_3_par_clk", 0, GEN2_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "gen2_synth_clk", NULL); - clk_register_clkdev(clk1, "gen2_synth_gate_clk", NULL); + clk_register_clkdev(clk, "gen2_syn_clk", NULL); + clk_register_clkdev(clk1, "gen2_syn_gclk", NULL); - clk = clk_register_aux("gen3_synth_clk", "gen3_synth_gate_clk", - "gen2_3_parent_clk", 0, GEN3_CLK_SYNT, NULL, aux_rtbl, + clk = clk_register_aux("gen3_syn_clk", "gen3_syn_gclk", + "gen2_3_par_clk", 0, GEN3_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "gen3_synth_clk", NULL); - clk_register_clkdev(clk1, "gen3_synth_gate_clk", NULL); + clk_register_clkdev(clk, "gen3_syn_clk", NULL); + clk_register_clkdev(clk1, "gen3_syn_gclk", NULL); /* clock derived from pll3 clk */ - clk = clk_register_gate(NULL, "usbh_clk", "pll3_48m_clk", 0, - PERIP1_CLK_ENB, USBH_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "usbh_clk", "pll3_clk", 0, PERIP1_CLK_ENB, + USBH_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, "usbh_clk", NULL); clk = clk_register_fixed_factor(NULL, "usbh.0_clk", "usbh_clk", 0, 1, @@ -494,8 +490,8 @@ void __init spear3xx_clk_init(void) 1); clk_register_clkdev(clk, "usbh.1_clk", NULL); - clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0, - PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "usbd_clk", "pll3_clk", 0, PERIP1_CLK_ENB, + USBD_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "designware_udc"); /* clock derived from ahb clk */ @@ -579,29 +575,25 @@ void __init spear3xx_clk_init(void) RAS_CLK_ENB, RAS_PLL2_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, "ras_pll2_clk", NULL); - clk = clk_register_gate(NULL, "ras_pll3_48m_clk", "pll3_48m_clk", 0, + clk = clk_register_gate(NULL, "ras_pll3_clk", "pll3_clk", 0, RAS_CLK_ENB, RAS_48M_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "ras_pll3_48m_clk", NULL); + clk_register_clkdev(clk, "ras_pll3_clk", NULL); - clk = clk_register_gate(NULL, "ras_gen0_synth_gate_clk", - "gen0_synth_gate_clk", 0, RAS_CLK_ENB, - RAS_SYNT0_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "ras_gen0_synth_gate_clk", NULL); + clk = clk_register_gate(NULL, "ras_syn0_gclk", "gen0_syn_gclk", 0, + RAS_CLK_ENB, RAS_SYNT0_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_syn0_gclk", NULL); - clk = clk_register_gate(NULL, "ras_gen1_synth_gate_clk", - "gen1_synth_gate_clk", 0, RAS_CLK_ENB, - RAS_SYNT1_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "ras_gen1_synth_gate_clk", NULL); + clk = clk_register_gate(NULL, "ras_syn1_gclk", "gen1_syn_gclk", 0, + RAS_CLK_ENB, RAS_SYNT1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_syn1_gclk", NULL); - clk = clk_register_gate(NULL, "ras_gen2_synth_gate_clk", - "gen2_synth_gate_clk", 0, RAS_CLK_ENB, - RAS_SYNT2_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "ras_gen2_synth_gate_clk", NULL); + clk = clk_register_gate(NULL, "ras_syn2_gclk", "gen2_syn_gclk", 0, + RAS_CLK_ENB, RAS_SYNT2_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_syn2_gclk", NULL); - clk = clk_register_gate(NULL, "ras_gen3_synth_gate_clk", - "gen3_synth_gate_clk", 0, RAS_CLK_ENB, - RAS_SYNT3_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "ras_gen3_synth_gate_clk", NULL); + clk = clk_register_gate(NULL, "ras_syn3_gclk", "gen3_syn_gclk", 0, + RAS_CLK_ENB, RAS_SYNT3_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_syn3_gclk", NULL); if (of_machine_is_compatible("st,spear300")) spear300_clk_init(); diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c index f9a20b382304..a98d0866f541 100644 --- a/drivers/clk/spear/spear6xx_clock.c +++ b/drivers/clk/spear/spear6xx_clock.c @@ -2,7 +2,7 @@ * SPEAr6xx machines clock framework source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -97,13 +97,12 @@ static struct aux_rate_tbl aux_rtbl[] = { {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ }; -static const char *clcd_parents[] = { "pll3_48m_clk", "clcd_synth_gate_clk", }; -static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk", -}; -static const char *uart_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", }; -static const char *gpt0_1_parents[] = { "pll3_48m_clk", "gpt0_1_synth_clk", }; -static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", }; -static const char *gpt3_parents[] = { "pll3_48m_clk", "gpt3_synth_clk", }; +static const char *clcd_parents[] = { "pll3_clk", "clcd_syn_gclk", }; +static const char *firda_parents[] = { "pll3_clk", "firda_syn_gclk", }; +static const char *uart_parents[] = { "pll3_clk", "uart_syn_gclk", }; +static const char *gpt0_1_parents[] = { "pll3_clk", "gpt0_1_syn_clk", }; +static const char *gpt2_parents[] = { "pll3_clk", "gpt2_syn_clk", }; +static const char *gpt3_parents[] = { "pll3_clk", "gpt3_syn_clk", }; static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none", "pll2_clk", }; @@ -136,9 +135,9 @@ void __init spear6xx_clk_init(void) clk_register_clkdev(clk, NULL, "rtc-spear"); /* clock derived from 30 MHz osc clk */ - clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0, + clk = clk_register_fixed_rate(NULL, "pll3_clk", "osc_24m_clk", 0, 48000000); - clk_register_clkdev(clk, "pll3_48m_clk", NULL); + clk_register_clkdev(clk, "pll3_clk", NULL); clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "osc_30m_clk", 0, PLL1_CTR, PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl), @@ -146,9 +145,9 @@ void __init spear6xx_clk_init(void) clk_register_clkdev(clk, "vco1_clk", NULL); clk_register_clkdev(clk1, "pll1_clk", NULL); - clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, - "osc_30m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl, - ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); + clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "osc_30m_clk", + 0, PLL2_CTR, PLL2_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl), + &_lock, &clk1, NULL); clk_register_clkdev(clk, "vco2_clk", NULL); clk_register_clkdev(clk1, "pll2_clk", NULL); @@ -165,111 +164,111 @@ void __init spear6xx_clk_init(void) HCLK_RATIO_MASK, 0, &_lock); clk_register_clkdev(clk, "ahb_clk", NULL); - clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk", - "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl, - ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "uart_synth_clk", NULL); - clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL); + clk = clk_register_aux("uart_syn_clk", "uart_syn_gclk", "pll1_clk", 0, + UART_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), + &_lock, &clk1); + clk_register_clkdev(clk, "uart_syn_clk", NULL); + clk_register_clkdev(clk1, "uart_syn_gclk", NULL); - clk = clk_register_mux(NULL, "uart_mux_clk", uart_parents, + clk = clk_register_mux(NULL, "uart_mclk", uart_parents, ARRAY_SIZE(uart_parents), 0, PERIP_CLK_CFG, UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "uart_mux_clk", NULL); + clk_register_clkdev(clk, "uart_mclk", NULL); - clk = clk_register_gate(NULL, "uart0", "uart_mux_clk", 0, - PERIP1_CLK_ENB, UART0_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "uart0", "uart_mclk", 0, PERIP1_CLK_ENB, + UART0_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "d0000000.serial"); - clk = clk_register_gate(NULL, "uart1", "uart_mux_clk", 0, - PERIP1_CLK_ENB, UART1_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "uart1", "uart_mclk", 0, PERIP1_CLK_ENB, + UART1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "d0080000.serial"); - clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk", - "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl, - ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "firda_synth_clk", NULL); - clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL); + clk = clk_register_aux("firda_syn_clk", "firda_syn_gclk", "pll1_clk", + 0, FIRDA_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), + &_lock, &clk1); + clk_register_clkdev(clk, "firda_syn_clk", NULL); + clk_register_clkdev(clk1, "firda_syn_gclk", NULL); - clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents, + clk = clk_register_mux(NULL, "firda_mclk", firda_parents, ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG, FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "firda_mux_clk", NULL); + clk_register_clkdev(clk, "firda_mclk", NULL); - clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0, + clk = clk_register_gate(NULL, "firda_clk", "firda_mclk", 0, PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "firda"); - clk = clk_register_aux("clcd_synth_clk", "clcd_synth_gate_clk", - "pll1_clk", 0, CLCD_CLK_SYNT, NULL, aux_rtbl, - ARRAY_SIZE(aux_rtbl), &_lock, &clk1); - clk_register_clkdev(clk, "clcd_synth_clk", NULL); - clk_register_clkdev(clk1, "clcd_synth_gate_clk", NULL); + clk = clk_register_aux("clcd_syn_clk", "clcd_syn_gclk", "pll1_clk", + 0, CLCD_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), + &_lock, &clk1); + clk_register_clkdev(clk, "clcd_syn_clk", NULL); + clk_register_clkdev(clk1, "clcd_syn_gclk", NULL); - clk = clk_register_mux(NULL, "clcd_mux_clk", clcd_parents, + clk = clk_register_mux(NULL, "clcd_mclk", clcd_parents, ARRAY_SIZE(clcd_parents), 0, PERIP_CLK_CFG, CLCD_CLK_SHIFT, CLCD_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "clcd_mux_clk", NULL); + clk_register_clkdev(clk, "clcd_mclk", NULL); - clk = clk_register_gate(NULL, "clcd_clk", "clcd_mux_clk", 0, + clk = clk_register_gate(NULL, "clcd_clk", "clcd_mclk", 0, PERIP1_CLK_ENB, CLCD_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "clcd"); /* gpt clocks */ - clk = clk_register_gpt("gpt0_1_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG, + clk = clk_register_gpt("gpt0_1_syn_clk", "pll1_clk", 0, PRSC0_CLK_CFG, gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); - clk_register_clkdev(clk, "gpt0_1_synth_clk", NULL); + clk_register_clkdev(clk, "gpt0_1_syn_clk", NULL); - clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt0_1_parents, + clk = clk_register_mux(NULL, "gpt0_mclk", gpt0_1_parents, ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG, GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt0"); - clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt0_1_parents, + clk = clk_register_mux(NULL, "gpt1_mclk", gpt0_1_parents, ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG, GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gpt1_mux_clk", NULL); + clk_register_clkdev(clk, "gpt1_mclk", NULL); - clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0, + clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0, PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt1"); - clk = clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG, + clk = clk_register_gpt("gpt2_syn_clk", "pll1_clk", 0, PRSC1_CLK_CFG, gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); - clk_register_clkdev(clk, "gpt2_synth_clk", NULL); + clk_register_clkdev(clk, "gpt2_syn_clk", NULL); - clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents, + clk = clk_register_mux(NULL, "gpt2_mclk", gpt2_parents, ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG, GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gpt2_mux_clk", NULL); + clk_register_clkdev(clk, "gpt2_mclk", NULL); - clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0, + clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0, PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt2"); - clk = clk_register_gpt("gpt3_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG, + clk = clk_register_gpt("gpt3_syn_clk", "pll1_clk", 0, PRSC2_CLK_CFG, gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); - clk_register_clkdev(clk, "gpt3_synth_clk", NULL); + clk_register_clkdev(clk, "gpt3_syn_clk", NULL); - clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt3_parents, + clk = clk_register_mux(NULL, "gpt3_mclk", gpt3_parents, ARRAY_SIZE(gpt3_parents), 0, PERIP_CLK_CFG, GPT3_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gpt3_mux_clk", NULL); + clk_register_clkdev(clk, "gpt3_mclk", NULL); - clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0, + clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mclk", 0, PERIP1_CLK_ENB, GPT3_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt3"); /* clock derived from pll3 clk */ - clk = clk_register_gate(NULL, "usbh0_clk", "pll3_48m_clk", 0, + clk = clk_register_gate(NULL, "usbh0_clk", "pll3_clk", 0, PERIP1_CLK_ENB, USBH0_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "usbh.0_clk"); - clk = clk_register_gate(NULL, "usbh1_clk", "pll3_48m_clk", 0, + clk = clk_register_gate(NULL, "usbh1_clk", "pll3_clk", 0, PERIP1_CLK_ENB, USBH1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "usbh.1_clk"); - clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0, - PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "usbd_clk", "pll3_clk", 0, PERIP1_CLK_ENB, + USBD_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "designware_udc"); /* clock derived from ahb clk */ @@ -278,9 +277,8 @@ void __init spear6xx_clk_init(void) clk_register_clkdev(clk, "ahbmult2_clk", NULL); clk = clk_register_mux(NULL, "ddr_clk", ddr_parents, - ARRAY_SIZE(ddr_parents), - 0, PLL_CLK_CFG, MCTR_CLK_SHIFT, MCTR_CLK_MASK, 0, - &_lock); + ARRAY_SIZE(ddr_parents), 0, PLL_CLK_CFG, MCTR_CLK_SHIFT, + MCTR_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "ddr_clk", NULL); clk = clk_register_divider(NULL, "apb_clk", "ahb_clk", @@ -298,7 +296,7 @@ void __init spear6xx_clk_init(void) clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB, GMAC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "gmac"); + clk_register_clkdev(clk, NULL, "e0800000.ethernet"); clk = clk_register_gate(NULL, "i2c_clk", "ahb_clk", 0, PERIP1_CLK_ENB, I2C_CLK_ENB, 0, &_lock); diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 32fe9ef5cc5c..98b06baafcc6 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -48,13 +48,13 @@ struct sh_cmt_priv { unsigned long next_match_value; unsigned long max_match_value; unsigned long rate; - spinlock_t lock; + raw_spinlock_t lock; struct clock_event_device ced; struct clocksource cs; unsigned long total_cycles; }; -static DEFINE_SPINLOCK(sh_cmt_lock); +static DEFINE_RAW_SPINLOCK(sh_cmt_lock); #define CMSTR -1 /* shared register */ #define CMCSR 0 /* channel register */ @@ -139,7 +139,7 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) unsigned long flags, value; /* start stop register shared by multiple timer channels */ - spin_lock_irqsave(&sh_cmt_lock, flags); + raw_spin_lock_irqsave(&sh_cmt_lock, flags); value = sh_cmt_read(p, CMSTR); if (start) @@ -148,7 +148,7 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) value &= ~(1 << cfg->timer_bit); sh_cmt_write(p, CMSTR, value); - spin_unlock_irqrestore(&sh_cmt_lock, flags); + raw_spin_unlock_irqrestore(&sh_cmt_lock, flags); } static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) @@ -328,9 +328,9 @@ static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta) { unsigned long flags; - spin_lock_irqsave(&p->lock, flags); + raw_spin_lock_irqsave(&p->lock, flags); __sh_cmt_set_next(p, delta); - spin_unlock_irqrestore(&p->lock, flags); + raw_spin_unlock_irqrestore(&p->lock, flags); } static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id) @@ -385,7 +385,7 @@ static int sh_cmt_start(struct sh_cmt_priv *p, unsigned long flag) int ret = 0; unsigned long flags; - spin_lock_irqsave(&p->lock, flags); + raw_spin_lock_irqsave(&p->lock, flags); if (!(p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) ret = sh_cmt_enable(p, &p->rate); @@ -398,7 +398,7 @@ static int sh_cmt_start(struct sh_cmt_priv *p, unsigned long flag) if ((flag == FLAG_CLOCKSOURCE) && (!(p->flags & FLAG_CLOCKEVENT))) __sh_cmt_set_next(p, p->max_match_value); out: - spin_unlock_irqrestore(&p->lock, flags); + raw_spin_unlock_irqrestore(&p->lock, flags); return ret; } @@ -408,7 +408,7 @@ static void sh_cmt_stop(struct sh_cmt_priv *p, unsigned long flag) unsigned long flags; unsigned long f; - spin_lock_irqsave(&p->lock, flags); + raw_spin_lock_irqsave(&p->lock, flags); f = p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE); p->flags &= ~flag; @@ -420,7 +420,7 @@ static void sh_cmt_stop(struct sh_cmt_priv *p, unsigned long flag) if ((flag == FLAG_CLOCKEVENT) && (p->flags & FLAG_CLOCKSOURCE)) __sh_cmt_set_next(p, p->max_match_value); - spin_unlock_irqrestore(&p->lock, flags); + raw_spin_unlock_irqrestore(&p->lock, flags); } static struct sh_cmt_priv *cs_to_sh_cmt(struct clocksource *cs) @@ -435,13 +435,13 @@ static cycle_t sh_cmt_clocksource_read(struct clocksource *cs) unsigned long value; int has_wrapped; - spin_lock_irqsave(&p->lock, flags); + raw_spin_lock_irqsave(&p->lock, flags); value = p->total_cycles; raw = sh_cmt_get_counter(p, &has_wrapped); if (unlikely(has_wrapped)) raw += p->match_value + 1; - spin_unlock_irqrestore(&p->lock, flags); + raw_spin_unlock_irqrestore(&p->lock, flags); return value + raw; } @@ -591,7 +591,7 @@ static int sh_cmt_register(struct sh_cmt_priv *p, char *name, p->max_match_value = (1 << p->width) - 1; p->match_value = p->max_match_value; - spin_lock_init(&p->lock); + raw_spin_lock_init(&p->lock); if (clockevent_rating) sh_cmt_register_clockevent(p, name, clockevent_rating); diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index a2172f690418..d9b76ca64a61 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -43,7 +43,7 @@ struct sh_mtu2_priv { struct clock_event_device ced; }; -static DEFINE_SPINLOCK(sh_mtu2_lock); +static DEFINE_RAW_SPINLOCK(sh_mtu2_lock); #define TSTR -1 /* shared register */ #define TCR 0 /* channel register */ @@ -107,7 +107,7 @@ static void sh_mtu2_start_stop_ch(struct sh_mtu2_priv *p, int start) unsigned long flags, value; /* start stop register shared by multiple timer channels */ - spin_lock_irqsave(&sh_mtu2_lock, flags); + raw_spin_lock_irqsave(&sh_mtu2_lock, flags); value = sh_mtu2_read(p, TSTR); if (start) @@ -116,7 +116,7 @@ static void sh_mtu2_start_stop_ch(struct sh_mtu2_priv *p, int start) value &= ~(1 << cfg->timer_bit); sh_mtu2_write(p, TSTR, value); - spin_unlock_irqrestore(&sh_mtu2_lock, flags); + raw_spin_unlock_irqrestore(&sh_mtu2_lock, flags); } static int sh_mtu2_enable(struct sh_mtu2_priv *p) diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 97f54b634be4..c1b51d49d106 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -45,7 +45,7 @@ struct sh_tmu_priv { struct clocksource cs; }; -static DEFINE_SPINLOCK(sh_tmu_lock); +static DEFINE_RAW_SPINLOCK(sh_tmu_lock); #define TSTR -1 /* shared register */ #define TCOR 0 /* channel register */ @@ -95,7 +95,7 @@ static void sh_tmu_start_stop_ch(struct sh_tmu_priv *p, int start) unsigned long flags, value; /* start stop register shared by multiple timer channels */ - spin_lock_irqsave(&sh_tmu_lock, flags); + raw_spin_lock_irqsave(&sh_tmu_lock, flags); value = sh_tmu_read(p, TSTR); if (start) @@ -104,7 +104,7 @@ static void sh_tmu_start_stop_ch(struct sh_tmu_priv *p, int start) value &= ~(1 << cfg->timer_bit); sh_tmu_write(p, TSTR, value); - spin_unlock_irqrestore(&sh_tmu_lock, flags); + raw_spin_unlock_irqrestore(&sh_tmu_lock, flags); } static int sh_tmu_enable(struct sh_tmu_priv *p) @@ -245,12 +245,7 @@ static void sh_tmu_clock_event_start(struct sh_tmu_priv *p, int periodic) sh_tmu_enable(p); - /* TODO: calculate good shift from rate and counter bit width */ - - ced->shift = 32; - ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift); - ced->max_delta_ns = clockevent_delta2ns(0xffffffff, ced); - ced->min_delta_ns = 5000; + clockevents_config(ced, p->rate); if (periodic) { p->periodic = (p->rate + HZ/2) / HZ; @@ -323,7 +318,8 @@ static void sh_tmu_register_clockevent(struct sh_tmu_priv *p, ced->set_mode = sh_tmu_clock_event_mode; dev_info(&p->pdev->dev, "used for clock events\n"); - clockevents_register_device(ced); + + clockevents_config_and_register(ced, 1, 0x300, 0xffffffff); ret = setup_irq(p->irqaction.irq, &p->irqaction); if (ret) { diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig index 78a666d1e5f5..a76b689e553b 100644 --- a/drivers/cpuidle/Kconfig +++ b/drivers/cpuidle/Kconfig @@ -18,3 +18,6 @@ config CPU_IDLE_GOV_MENU bool depends on CPU_IDLE && NO_HZ default y + +config ARCH_NEEDS_CPU_IDLE_COUPLED + def_bool n diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile index 5634f88379df..38c8f69f30cf 100644 --- a/drivers/cpuidle/Makefile +++ b/drivers/cpuidle/Makefile @@ -3,3 +3,4 @@ # obj-y += cpuidle.o driver.o governor.o sysfs.o governors/ +obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o diff --git a/drivers/cpuidle/coupled.c b/drivers/cpuidle/coupled.c new file mode 100644 index 000000000000..2c9bf2692232 --- /dev/null +++ b/drivers/cpuidle/coupled.c @@ -0,0 +1,715 @@ +/* + * coupled.c - helper functions to enter the same idle state on multiple cpus + * + * Copyright (c) 2011 Google, Inc. + * + * Author: Colin Cross + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "cpuidle.h" + +/** + * DOC: Coupled cpuidle states + * + * On some ARM SMP SoCs (OMAP4460, Tegra 2, and probably more), the + * cpus cannot be independently powered down, either due to + * sequencing restrictions (on Tegra 2, cpu 0 must be the last to + * power down), or due to HW bugs (on OMAP4460, a cpu powering up + * will corrupt the gic state unless the other cpu runs a work + * around). Each cpu has a power state that it can enter without + * coordinating with the other cpu (usually Wait For Interrupt, or + * WFI), and one or more "coupled" power states that affect blocks + * shared between the cpus (L2 cache, interrupt controller, and + * sometimes the whole SoC). Entering a coupled power state must + * be tightly controlled on both cpus. + * + * This file implements a solution, where each cpu will wait in the + * WFI state until all cpus are ready to enter a coupled state, at + * which point the coupled state function will be called on all + * cpus at approximately the same time. + * + * Once all cpus are ready to enter idle, they are woken by an smp + * cross call. At this point, there is a chance that one of the + * cpus will find work to do, and choose not to enter idle. A + * final pass is needed to guarantee that all cpus will call the + * power state enter function at the same time. During this pass, + * each cpu will increment the ready counter, and continue once the + * ready counter matches the number of online coupled cpus. If any + * cpu exits idle, the other cpus will decrement their counter and + * retry. + * + * requested_state stores the deepest coupled idle state each cpu + * is ready for. It is assumed that the states are indexed from + * shallowest (highest power, lowest exit latency) to deepest + * (lowest power, highest exit latency). The requested_state + * variable is not locked. It is only written from the cpu that + * it stores (or by the on/offlining cpu if that cpu is offline), + * and only read after all the cpus are ready for the coupled idle + * state are are no longer updating it. + * + * Three atomic counters are used. alive_count tracks the number + * of cpus in the coupled set that are currently or soon will be + * online. waiting_count tracks the number of cpus that are in + * the waiting loop, in the ready loop, or in the coupled idle state. + * ready_count tracks the number of cpus that are in the ready loop + * or in the coupled idle state. + * + * To use coupled cpuidle states, a cpuidle driver must: + * + * Set struct cpuidle_device.coupled_cpus to the mask of all + * coupled cpus, usually the same as cpu_possible_mask if all cpus + * are part of the same cluster. The coupled_cpus mask must be + * set in the struct cpuidle_device for each cpu. + * + * Set struct cpuidle_device.safe_state to a state that is not a + * coupled state. This is usually WFI. + * + * Set CPUIDLE_FLAG_COUPLED in struct cpuidle_state.flags for each + * state that affects multiple cpus. + * + * Provide a struct cpuidle_state.enter function for each state + * that affects multiple cpus. This function is guaranteed to be + * called on all cpus at approximately the same time. The driver + * should ensure that the cpus all abort together if any cpu tries + * to abort once the function is called. The function should return + * with interrupts still disabled. + */ + +/** + * struct cpuidle_coupled - data for set of cpus that share a coupled idle state + * @coupled_cpus: mask of cpus that are part of the coupled set + * @requested_state: array of requested states for cpus in the coupled set + * @ready_waiting_counts: combined count of cpus in ready or waiting loops + * @online_count: count of cpus that are online + * @refcnt: reference count of cpuidle devices that are using this struct + * @prevent: flag to prevent coupled idle while a cpu is hotplugging + */ +struct cpuidle_coupled { + cpumask_t coupled_cpus; + int requested_state[NR_CPUS]; + atomic_t ready_waiting_counts; + int online_count; + int refcnt; + int prevent; +}; + +#define WAITING_BITS 16 +#define MAX_WAITING_CPUS (1 << WAITING_BITS) +#define WAITING_MASK (MAX_WAITING_CPUS - 1) +#define READY_MASK (~WAITING_MASK) + +#define CPUIDLE_COUPLED_NOT_IDLE (-1) + +static DEFINE_MUTEX(cpuidle_coupled_lock); +static DEFINE_PER_CPU(struct call_single_data, cpuidle_coupled_poke_cb); + +/* + * The cpuidle_coupled_poked_mask mask is used to avoid calling + * __smp_call_function_single with the per cpu call_single_data struct already + * in use. This prevents a deadlock where two cpus are waiting for each others + * call_single_data struct to be available + */ +static cpumask_t cpuidle_coupled_poked_mask; + +/** + * cpuidle_coupled_parallel_barrier - synchronize all online coupled cpus + * @dev: cpuidle_device of the calling cpu + * @a: atomic variable to hold the barrier + * + * No caller to this function will return from this function until all online + * cpus in the same coupled group have called this function. Once any caller + * has returned from this function, the barrier is immediately available for + * reuse. + * + * The atomic variable a must be initialized to 0 before any cpu calls + * this function, will be reset to 0 before any cpu returns from this function. + * + * Must only be called from within a coupled idle state handler + * (state.enter when state.flags has CPUIDLE_FLAG_COUPLED set). + * + * Provides full smp barrier semantics before and after calling. + */ +void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a) +{ + int n = dev->coupled->online_count; + + smp_mb__before_atomic_inc(); + atomic_inc(a); + + while (atomic_read(a) < n) + cpu_relax(); + + if (atomic_inc_return(a) == n * 2) { + atomic_set(a, 0); + return; + } + + while (atomic_read(a) > n) + cpu_relax(); +} + +/** + * cpuidle_state_is_coupled - check if a state is part of a coupled set + * @dev: struct cpuidle_device for the current cpu + * @drv: struct cpuidle_driver for the platform + * @state: index of the target state in drv->states + * + * Returns true if the target state is coupled with cpus besides this one + */ +bool cpuidle_state_is_coupled(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int state) +{ + return drv->states[state].flags & CPUIDLE_FLAG_COUPLED; +} + +/** + * cpuidle_coupled_set_ready - mark a cpu as ready + * @coupled: the struct coupled that contains the current cpu + */ +static inline void cpuidle_coupled_set_ready(struct cpuidle_coupled *coupled) +{ + atomic_add(MAX_WAITING_CPUS, &coupled->ready_waiting_counts); +} + +/** + * cpuidle_coupled_set_not_ready - mark a cpu as not ready + * @coupled: the struct coupled that contains the current cpu + * + * Decrements the ready counter, unless the ready (and thus the waiting) counter + * is equal to the number of online cpus. Prevents a race where one cpu + * decrements the waiting counter and then re-increments it just before another + * cpu has decremented its ready counter, leading to the ready counter going + * down from the number of online cpus without going through the coupled idle + * state. + * + * Returns 0 if the counter was decremented successfully, -EINVAL if the ready + * counter was equal to the number of online cpus. + */ +static +inline int cpuidle_coupled_set_not_ready(struct cpuidle_coupled *coupled) +{ + int all; + int ret; + + all = coupled->online_count || (coupled->online_count << WAITING_BITS); + ret = atomic_add_unless(&coupled->ready_waiting_counts, + -MAX_WAITING_CPUS, all); + + return ret ? 0 : -EINVAL; +} + +/** + * cpuidle_coupled_no_cpus_ready - check if no cpus in a coupled set are ready + * @coupled: the struct coupled that contains the current cpu + * + * Returns true if all of the cpus in a coupled set are out of the ready loop. + */ +static inline int cpuidle_coupled_no_cpus_ready(struct cpuidle_coupled *coupled) +{ + int r = atomic_read(&coupled->ready_waiting_counts) >> WAITING_BITS; + return r == 0; +} + +/** + * cpuidle_coupled_cpus_ready - check if all cpus in a coupled set are ready + * @coupled: the struct coupled that contains the current cpu + * + * Returns true if all cpus coupled to this target state are in the ready loop + */ +static inline bool cpuidle_coupled_cpus_ready(struct cpuidle_coupled *coupled) +{ + int r = atomic_read(&coupled->ready_waiting_counts) >> WAITING_BITS; + return r == coupled->online_count; +} + +/** + * cpuidle_coupled_cpus_waiting - check if all cpus in a coupled set are waiting + * @coupled: the struct coupled that contains the current cpu + * + * Returns true if all cpus coupled to this target state are in the wait loop + */ +static inline bool cpuidle_coupled_cpus_waiting(struct cpuidle_coupled *coupled) +{ + int w = atomic_read(&coupled->ready_waiting_counts) & WAITING_MASK; + return w == coupled->online_count; +} + +/** + * cpuidle_coupled_no_cpus_waiting - check if no cpus in coupled set are waiting + * @coupled: the struct coupled that contains the current cpu + * + * Returns true if all of the cpus in a coupled set are out of the waiting loop. + */ +static inline int cpuidle_coupled_no_cpus_waiting(struct cpuidle_coupled *coupled) +{ + int w = atomic_read(&coupled->ready_waiting_counts) & WAITING_MASK; + return w == 0; +} + +/** + * cpuidle_coupled_get_state - determine the deepest idle state + * @dev: struct cpuidle_device for this cpu + * @coupled: the struct coupled that contains the current cpu + * + * Returns the deepest idle state that all coupled cpus can enter + */ +static inline int cpuidle_coupled_get_state(struct cpuidle_device *dev, + struct cpuidle_coupled *coupled) +{ + int i; + int state = INT_MAX; + + /* + * Read barrier ensures that read of requested_state is ordered after + * reads of ready_count. Matches the write barriers + * cpuidle_set_state_waiting. + */ + smp_rmb(); + + for_each_cpu_mask(i, coupled->coupled_cpus) + if (cpu_online(i) && coupled->requested_state[i] < state) + state = coupled->requested_state[i]; + + return state; +} + +static void cpuidle_coupled_poked(void *info) +{ + int cpu = (unsigned long)info; + cpumask_clear_cpu(cpu, &cpuidle_coupled_poked_mask); +} + +/** + * cpuidle_coupled_poke - wake up a cpu that may be waiting + * @cpu: target cpu + * + * Ensures that the target cpu exits it's waiting idle state (if it is in it) + * and will see updates to waiting_count before it re-enters it's waiting idle + * state. + * + * If cpuidle_coupled_poked_mask is already set for the target cpu, that cpu + * either has or will soon have a pending IPI that will wake it out of idle, + * or it is currently processing the IPI and is not in idle. + */ +static void cpuidle_coupled_poke(int cpu) +{ + struct call_single_data *csd = &per_cpu(cpuidle_coupled_poke_cb, cpu); + + if (!cpumask_test_and_set_cpu(cpu, &cpuidle_coupled_poked_mask)) + __smp_call_function_single(cpu, csd, 0); +} + +/** + * cpuidle_coupled_poke_others - wake up all other cpus that may be waiting + * @dev: struct cpuidle_device for this cpu + * @coupled: the struct coupled that contains the current cpu + * + * Calls cpuidle_coupled_poke on all other online cpus. + */ +static void cpuidle_coupled_poke_others(int this_cpu, + struct cpuidle_coupled *coupled) +{ + int cpu; + + for_each_cpu_mask(cpu, coupled->coupled_cpus) + if (cpu != this_cpu && cpu_online(cpu)) + cpuidle_coupled_poke(cpu); +} + +/** + * cpuidle_coupled_set_waiting - mark this cpu as in the wait loop + * @dev: struct cpuidle_device for this cpu + * @coupled: the struct coupled that contains the current cpu + * @next_state: the index in drv->states of the requested state for this cpu + * + * Updates the requested idle state for the specified cpuidle device, + * poking all coupled cpus out of idle if necessary to let them see the new + * state. + */ +static void cpuidle_coupled_set_waiting(int cpu, + struct cpuidle_coupled *coupled, int next_state) +{ + int w; + + coupled->requested_state[cpu] = next_state; + + /* + * If this is the last cpu to enter the waiting state, poke + * all the other cpus out of their waiting state so they can + * enter a deeper state. This can race with one of the cpus + * exiting the waiting state due to an interrupt and + * decrementing waiting_count, see comment below. + * + * The atomic_inc_return provides a write barrier to order the write + * to requested_state with the later write that increments ready_count. + */ + w = atomic_inc_return(&coupled->ready_waiting_counts) & WAITING_MASK; + if (w == coupled->online_count) + cpuidle_coupled_poke_others(cpu, coupled); +} + +/** + * cpuidle_coupled_set_not_waiting - mark this cpu as leaving the wait loop + * @dev: struct cpuidle_device for this cpu + * @coupled: the struct coupled that contains the current cpu + * + * Removes the requested idle state for the specified cpuidle device. + */ +static void cpuidle_coupled_set_not_waiting(int cpu, + struct cpuidle_coupled *coupled) +{ + /* + * Decrementing waiting count can race with incrementing it in + * cpuidle_coupled_set_waiting, but that's OK. Worst case, some + * cpus will increment ready_count and then spin until they + * notice that this cpu has cleared it's requested_state. + */ + atomic_dec(&coupled->ready_waiting_counts); + + coupled->requested_state[cpu] = CPUIDLE_COUPLED_NOT_IDLE; +} + +/** + * cpuidle_coupled_set_done - mark this cpu as leaving the ready loop + * @cpu: the current cpu + * @coupled: the struct coupled that contains the current cpu + * + * Marks this cpu as no longer in the ready and waiting loops. Decrements + * the waiting count first to prevent another cpu looping back in and seeing + * this cpu as waiting just before it exits idle. + */ +static void cpuidle_coupled_set_done(int cpu, struct cpuidle_coupled *coupled) +{ + cpuidle_coupled_set_not_waiting(cpu, coupled); + atomic_sub(MAX_WAITING_CPUS, &coupled->ready_waiting_counts); +} + +/** + * cpuidle_coupled_clear_pokes - spin until the poke interrupt is processed + * @cpu - this cpu + * + * Turns on interrupts and spins until any outstanding poke interrupts have + * been processed and the poke bit has been cleared. + * + * Other interrupts may also be processed while interrupts are enabled, so + * need_resched() must be tested after turning interrupts off again to make sure + * the interrupt didn't schedule work that should take the cpu out of idle. + * + * Returns 0 if need_resched was false, -EINTR if need_resched was true. + */ +static int cpuidle_coupled_clear_pokes(int cpu) +{ + local_irq_enable(); + while (cpumask_test_cpu(cpu, &cpuidle_coupled_poked_mask)) + cpu_relax(); + local_irq_disable(); + + return need_resched() ? -EINTR : 0; +} + +/** + * cpuidle_enter_state_coupled - attempt to enter a state with coupled cpus + * @dev: struct cpuidle_device for the current cpu + * @drv: struct cpuidle_driver for the platform + * @next_state: index of the requested state in drv->states + * + * Coordinate with coupled cpus to enter the target state. This is a two + * stage process. In the first stage, the cpus are operating independently, + * and may call into cpuidle_enter_state_coupled at completely different times. + * To save as much power as possible, the first cpus to call this function will + * go to an intermediate state (the cpuidle_device's safe state), and wait for + * all the other cpus to call this function. Once all coupled cpus are idle, + * the second stage will start. Each coupled cpu will spin until all cpus have + * guaranteed that they will call the target_state. + * + * This function must be called with interrupts disabled. It may enable + * interrupts while preparing for idle, and it will always return with + * interrupts enabled. + */ +int cpuidle_enter_state_coupled(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int next_state) +{ + int entered_state = -1; + struct cpuidle_coupled *coupled = dev->coupled; + + if (!coupled) + return -EINVAL; + + while (coupled->prevent) { + if (cpuidle_coupled_clear_pokes(dev->cpu)) { + local_irq_enable(); + return entered_state; + } + entered_state = cpuidle_enter_state(dev, drv, + dev->safe_state_index); + } + + /* Read barrier ensures online_count is read after prevent is cleared */ + smp_rmb(); + + cpuidle_coupled_set_waiting(dev->cpu, coupled, next_state); + +retry: + /* + * Wait for all coupled cpus to be idle, using the deepest state + * allowed for a single cpu. + */ + while (!cpuidle_coupled_cpus_waiting(coupled)) { + if (cpuidle_coupled_clear_pokes(dev->cpu)) { + cpuidle_coupled_set_not_waiting(dev->cpu, coupled); + goto out; + } + + if (coupled->prevent) { + cpuidle_coupled_set_not_waiting(dev->cpu, coupled); + goto out; + } + + entered_state = cpuidle_enter_state(dev, drv, + dev->safe_state_index); + } + + if (cpuidle_coupled_clear_pokes(dev->cpu)) { + cpuidle_coupled_set_not_waiting(dev->cpu, coupled); + goto out; + } + + /* + * All coupled cpus are probably idle. There is a small chance that + * one of the other cpus just became active. Increment the ready count, + * and spin until all coupled cpus have incremented the counter. Once a + * cpu has incremented the ready counter, it cannot abort idle and must + * spin until either all cpus have incremented the ready counter, or + * another cpu leaves idle and decrements the waiting counter. + */ + + cpuidle_coupled_set_ready(coupled); + while (!cpuidle_coupled_cpus_ready(coupled)) { + /* Check if any other cpus bailed out of idle. */ + if (!cpuidle_coupled_cpus_waiting(coupled)) + if (!cpuidle_coupled_set_not_ready(coupled)) + goto retry; + + cpu_relax(); + } + + /* all cpus have acked the coupled state */ + next_state = cpuidle_coupled_get_state(dev, coupled); + + entered_state = cpuidle_enter_state(dev, drv, next_state); + + cpuidle_coupled_set_done(dev->cpu, coupled); + +out: + /* + * Normal cpuidle states are expected to return with irqs enabled. + * That leads to an inefficiency where a cpu receiving an interrupt + * that brings it out of idle will process that interrupt before + * exiting the idle enter function and decrementing ready_count. All + * other cpus will need to spin waiting for the cpu that is processing + * the interrupt. If the driver returns with interrupts disabled, + * all other cpus will loop back into the safe idle state instead of + * spinning, saving power. + * + * Calling local_irq_enable here allows coupled states to return with + * interrupts disabled, but won't cause problems for drivers that + * exit with interrupts enabled. + */ + local_irq_enable(); + + /* + * Wait until all coupled cpus have exited idle. There is no risk that + * a cpu exits and re-enters the ready state because this cpu has + * already decremented its waiting_count. + */ + while (!cpuidle_coupled_no_cpus_ready(coupled)) + cpu_relax(); + + return entered_state; +} + +static void cpuidle_coupled_update_online_cpus(struct cpuidle_coupled *coupled) +{ + cpumask_t cpus; + cpumask_and(&cpus, cpu_online_mask, &coupled->coupled_cpus); + coupled->online_count = cpumask_weight(&cpus); +} + +/** + * cpuidle_coupled_register_device - register a coupled cpuidle device + * @dev: struct cpuidle_device for the current cpu + * + * Called from cpuidle_register_device to handle coupled idle init. Finds the + * cpuidle_coupled struct for this set of coupled cpus, or creates one if none + * exists yet. + */ +int cpuidle_coupled_register_device(struct cpuidle_device *dev) +{ + int cpu; + struct cpuidle_device *other_dev; + struct call_single_data *csd; + struct cpuidle_coupled *coupled; + + if (cpumask_empty(&dev->coupled_cpus)) + return 0; + + for_each_cpu_mask(cpu, dev->coupled_cpus) { + other_dev = per_cpu(cpuidle_devices, cpu); + if (other_dev && other_dev->coupled) { + coupled = other_dev->coupled; + goto have_coupled; + } + } + + /* No existing coupled info found, create a new one */ + coupled = kzalloc(sizeof(struct cpuidle_coupled), GFP_KERNEL); + if (!coupled) + return -ENOMEM; + + coupled->coupled_cpus = dev->coupled_cpus; + +have_coupled: + dev->coupled = coupled; + if (WARN_ON(!cpumask_equal(&dev->coupled_cpus, &coupled->coupled_cpus))) + coupled->prevent++; + + cpuidle_coupled_update_online_cpus(coupled); + + coupled->refcnt++; + + csd = &per_cpu(cpuidle_coupled_poke_cb, dev->cpu); + csd->func = cpuidle_coupled_poked; + csd->info = (void *)(unsigned long)dev->cpu; + + return 0; +} + +/** + * cpuidle_coupled_unregister_device - unregister a coupled cpuidle device + * @dev: struct cpuidle_device for the current cpu + * + * Called from cpuidle_unregister_device to tear down coupled idle. Removes the + * cpu from the coupled idle set, and frees the cpuidle_coupled_info struct if + * this was the last cpu in the set. + */ +void cpuidle_coupled_unregister_device(struct cpuidle_device *dev) +{ + struct cpuidle_coupled *coupled = dev->coupled; + + if (cpumask_empty(&dev->coupled_cpus)) + return; + + if (--coupled->refcnt) + kfree(coupled); + dev->coupled = NULL; +} + +/** + * cpuidle_coupled_prevent_idle - prevent cpus from entering a coupled state + * @coupled: the struct coupled that contains the cpu that is changing state + * + * Disables coupled cpuidle on a coupled set of cpus. Used to ensure that + * cpu_online_mask doesn't change while cpus are coordinating coupled idle. + */ +static void cpuidle_coupled_prevent_idle(struct cpuidle_coupled *coupled) +{ + int cpu = get_cpu(); + + /* Force all cpus out of the waiting loop. */ + coupled->prevent++; + cpuidle_coupled_poke_others(cpu, coupled); + put_cpu(); + while (!cpuidle_coupled_no_cpus_waiting(coupled)) + cpu_relax(); +} + +/** + * cpuidle_coupled_allow_idle - allows cpus to enter a coupled state + * @coupled: the struct coupled that contains the cpu that is changing state + * + * Enables coupled cpuidle on a coupled set of cpus. Used to ensure that + * cpu_online_mask doesn't change while cpus are coordinating coupled idle. + */ +static void cpuidle_coupled_allow_idle(struct cpuidle_coupled *coupled) +{ + int cpu = get_cpu(); + + /* + * Write barrier ensures readers see the new online_count when they + * see prevent == 0. + */ + smp_wmb(); + coupled->prevent--; + /* Force cpus out of the prevent loop. */ + cpuidle_coupled_poke_others(cpu, coupled); + put_cpu(); +} + +/** + * cpuidle_coupled_cpu_notify - notifier called during hotplug transitions + * @nb: notifier block + * @action: hotplug transition + * @hcpu: target cpu number + * + * Called when a cpu is brought on or offline using hotplug. Updates the + * coupled cpu set appropriately + */ +static int cpuidle_coupled_cpu_notify(struct notifier_block *nb, + unsigned long action, void *hcpu) +{ + int cpu = (unsigned long)hcpu; + struct cpuidle_device *dev; + + mutex_lock(&cpuidle_lock); + + dev = per_cpu(cpuidle_devices, cpu); + if (!dev->coupled) + goto out; + + switch (action & ~CPU_TASKS_FROZEN) { + case CPU_UP_PREPARE: + case CPU_DOWN_PREPARE: + cpuidle_coupled_prevent_idle(dev->coupled); + break; + case CPU_ONLINE: + case CPU_DEAD: + cpuidle_coupled_update_online_cpus(dev->coupled); + /* Fall through */ + case CPU_UP_CANCELED: + case CPU_DOWN_FAILED: + cpuidle_coupled_allow_idle(dev->coupled); + break; + } + +out: + mutex_unlock(&cpuidle_lock); + return NOTIFY_OK; +} + +static struct notifier_block cpuidle_coupled_cpu_notifier = { + .notifier_call = cpuidle_coupled_cpu_notify, +}; + +static int __init cpuidle_coupled_init(void) +{ + return register_cpu_notifier(&cpuidle_coupled_cpu_notifier); +} +core_initcall(cpuidle_coupled_init); diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index d90519cec880..bb4e827434ce 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -91,6 +91,34 @@ int cpuidle_play_dead(void) return -ENODEV; } +/** + * cpuidle_enter_state - enter the state and update stats + * @dev: cpuidle device for this cpu + * @drv: cpuidle driver for this cpu + * @next_state: index into drv->states of the state to enter + */ +int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv, + int next_state) +{ + int entered_state; + + entered_state = cpuidle_enter_ops(dev, drv, next_state); + + if (entered_state >= 0) { + /* Update cpuidle counters */ + /* This can be moved to within driver enter routine + * but that results in multiple copies of same code. + */ + dev->states_usage[entered_state].time += + (unsigned long long)dev->last_residency; + dev->states_usage[entered_state].usage++; + } else { + dev->last_residency = 0; + } + + return entered_state; +} + /** * cpuidle_idle_call - the main idle loop * @@ -113,15 +141,6 @@ int cpuidle_idle_call(void) if (!dev || !dev->enabled) return -EBUSY; -#if 0 - /* shows regressions, re-enable for 2.6.29 */ - /* - * run any timers that can be run now, at this point - * before calculating the idle duration etc. - */ - hrtimer_peek_ahead_timers(); -#endif - /* ask the governor for the next state */ next_state = cpuidle_curr_governor->select(drv, dev); if (need_resched()) { @@ -132,23 +151,15 @@ int cpuidle_idle_call(void) trace_power_start_rcuidle(POWER_CSTATE, next_state, dev->cpu); trace_cpu_idle_rcuidle(next_state, dev->cpu); - entered_state = cpuidle_enter_ops(dev, drv, next_state); + if (cpuidle_state_is_coupled(dev, drv, next_state)) + entered_state = cpuidle_enter_state_coupled(dev, drv, + next_state); + else + entered_state = cpuidle_enter_state(dev, drv, next_state); trace_power_end_rcuidle(dev->cpu); trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu); - if (entered_state >= 0) { - /* Update cpuidle counters */ - /* This can be moved to within driver enter routine - * but that results in multiple copies of same code. - */ - dev->states_usage[entered_state].time += - (unsigned long long)dev->last_residency; - dev->states_usage[entered_state].usage++; - } else { - dev->last_residency = 0; - } - /* give the governor an opportunity to reflect on the outcome */ if (cpuidle_curr_governor->reflect) cpuidle_curr_governor->reflect(dev, entered_state); @@ -283,6 +294,9 @@ int cpuidle_enable_device(struct cpuidle_device *dev) int ret, i; struct cpuidle_driver *drv = cpuidle_get_driver(); + if (!dev) + return -EINVAL; + if (dev->enabled) return 0; if (!drv || !cpuidle_curr_governor) @@ -367,8 +381,6 @@ static int __cpuidle_register_device(struct cpuidle_device *dev) struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu); struct cpuidle_driver *cpuidle_driver = cpuidle_get_driver(); - if (!dev) - return -EINVAL; if (!try_module_get(cpuidle_driver->owner)) return -EINVAL; @@ -376,13 +388,25 @@ static int __cpuidle_register_device(struct cpuidle_device *dev) per_cpu(cpuidle_devices, dev->cpu) = dev; list_add(&dev->device_list, &cpuidle_detected_devices); - if ((ret = cpuidle_add_sysfs(cpu_dev))) { - module_put(cpuidle_driver->owner); - return ret; - } + ret = cpuidle_add_sysfs(cpu_dev); + if (ret) + goto err_sysfs; + + ret = cpuidle_coupled_register_device(dev); + if (ret) + goto err_coupled; dev->registered = 1; return 0; + +err_coupled: + cpuidle_remove_sysfs(cpu_dev); + wait_for_completion(&dev->kobj_unregister); +err_sysfs: + list_del(&dev->device_list); + per_cpu(cpuidle_devices, dev->cpu) = NULL; + module_put(cpuidle_driver->owner); + return ret; } /** @@ -393,6 +417,9 @@ int cpuidle_register_device(struct cpuidle_device *dev) { int ret; + if (!dev) + return -EINVAL; + mutex_lock(&cpuidle_lock); if ((ret = __cpuidle_register_device(dev))) { @@ -432,6 +459,8 @@ void cpuidle_unregister_device(struct cpuidle_device *dev) wait_for_completion(&dev->kobj_unregister); per_cpu(cpuidle_devices, dev->cpu) = NULL; + cpuidle_coupled_unregister_device(dev); + cpuidle_resume_and_unlock(); module_put(cpuidle_driver->owner); diff --git a/drivers/cpuidle/cpuidle.h b/drivers/cpuidle/cpuidle.h index 7db186685c27..76e7f696ad8c 100644 --- a/drivers/cpuidle/cpuidle.h +++ b/drivers/cpuidle/cpuidle.h @@ -14,6 +14,8 @@ extern struct list_head cpuidle_detected_devices; extern struct mutex cpuidle_lock; extern spinlock_t cpuidle_driver_lock; extern int cpuidle_disabled(void); +extern int cpuidle_enter_state(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int next_state); /* idle loop */ extern void cpuidle_install_idle_handler(void); @@ -30,4 +32,34 @@ extern void cpuidle_remove_state_sysfs(struct cpuidle_device *device); extern int cpuidle_add_sysfs(struct device *dev); extern void cpuidle_remove_sysfs(struct device *dev); +#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED +bool cpuidle_state_is_coupled(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int state); +int cpuidle_enter_state_coupled(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int next_state); +int cpuidle_coupled_register_device(struct cpuidle_device *dev); +void cpuidle_coupled_unregister_device(struct cpuidle_device *dev); +#else +static inline bool cpuidle_state_is_coupled(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int state) +{ + return false; +} + +static inline int cpuidle_enter_state_coupled(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int next_state) +{ + return -1; +} + +static inline int cpuidle_coupled_register_device(struct cpuidle_device *dev) +{ + return 0; +} + +static inline void cpuidle_coupled_unregister_device(struct cpuidle_device *dev) +{ +} +#endif + #endif /* __DRIVER_CPUIDLE_H */ diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index e23dc82d43ac..721296157577 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -1626,4 +1626,4 @@ module_exit(dw_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver"); MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); -MODULE_AUTHOR("Viresh Kumar "); +MODULE_AUTHOR("Viresh Kumar "); diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index fb4f4990f5eb..1dc2a4ad0026 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -815,8 +815,6 @@ static int sdma_request_channel(struct sdma_channel *sdmac) init_completion(&sdmac->done); - sdmac->buf_tail = 0; - return 0; out: @@ -927,6 +925,8 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg( sdmac->flags = 0; + sdmac->buf_tail = 0; + dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n", sg_len, channel); @@ -1027,6 +1027,8 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( sdmac->status = DMA_IN_PROGRESS; + sdmac->buf_tail = 0; + sdmac->flags |= IMX_DMA_SG_LOOP; sdmac->direction = direction; ret = sdma_load_context(sdmac); diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index cbcc28e79be6..e4feba6b03c0 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -392,6 +392,8 @@ struct pl330_req { struct pl330_reqcfg *cfg; /* Pointer to first xfer in the request. */ struct pl330_xfer *x; + /* Hook to attach to DMAC's list of reqs with due callback */ + struct list_head rqd; }; /* @@ -461,8 +463,6 @@ struct _pl330_req { /* Number of bytes taken to setup MC for the req */ u32 mc_len; struct pl330_req *r; - /* Hook to attach to DMAC's list of reqs with due callback */ - struct list_head rqd; }; /* ToBeDone for tasklet */ @@ -1683,7 +1683,7 @@ static void pl330_dotask(unsigned long data) /* Returns 1 if state was updated, 0 otherwise */ static int pl330_update(const struct pl330_info *pi) { - struct _pl330_req *rqdone; + struct pl330_req *rqdone, *tmp; struct pl330_dmac *pl330; unsigned long flags; void __iomem *regs; @@ -1750,7 +1750,10 @@ static int pl330_update(const struct pl330_info *pi) if (active == -1) /* Aborted */ continue; - rqdone = &thrd->req[active]; + /* Detach the req */ + rqdone = thrd->req[active].r; + thrd->req[active].r = NULL; + mark_free(thrd, active); /* Get going again ASAP */ @@ -1762,20 +1765,11 @@ static int pl330_update(const struct pl330_info *pi) } /* Now that we are in no hurry, do the callbacks */ - while (!list_empty(&pl330->req_done)) { - struct pl330_req *r; - - rqdone = container_of(pl330->req_done.next, - struct _pl330_req, rqd); - - list_del_init(&rqdone->rqd); - - /* Detach the req */ - r = rqdone->r; - rqdone->r = NULL; + list_for_each_entry_safe(rqdone, tmp, &pl330->req_done, rqd) { + list_del(&rqdone->rqd); spin_unlock_irqrestore(&pl330->lock, flags); - _callback(r, PL330_ERR_NONE); + _callback(rqdone, PL330_ERR_NONE); spin_lock_irqsave(&pl330->lock, flags); } @@ -2321,7 +2315,7 @@ static void pl330_tasklet(unsigned long data) /* Pick up ripe tomatoes */ list_for_each_entry_safe(desc, _dt, &pch->work_list, node) if (desc->status == DONE) { - if (pch->cyclic) + if (!pch->cyclic) dma_cookie_complete(&desc->txd); list_move_tail(&desc->node, &list); } @@ -2539,7 +2533,7 @@ static inline void _init_desc(struct dma_pl330_desc *desc) } /* Returns the number of descriptors added to the DMAC pool */ -int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count) +static int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count) { struct dma_pl330_desc *desc; unsigned long flags; diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 10f375032e96..de5ba86e8b89 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -164,7 +164,7 @@ void *edac_align_ptr(void **p, unsigned size, int n_elems) else return (char *)ptr; - r = size % align; + r = (unsigned long)p % align; if (r == 0) return (char *)ptr; diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c index d27778f65a5d..a499c7ed820a 100644 --- a/drivers/edac/i7core_edac.c +++ b/drivers/edac/i7core_edac.c @@ -1814,12 +1814,6 @@ static int i7core_mce_check_error(struct notifier_block *nb, unsigned long val, if (mce->bank != 8) return NOTIFY_DONE; -#ifdef CONFIG_SMP - /* Only handle if it is the right mc controller */ - if (mce->socketid != pvt->i7core_dev->socket) - return NOTIFY_DONE; -#endif - smp_rmb(); if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) { smp_wmb(); @@ -2116,8 +2110,6 @@ static void i7core_unregister_mci(struct i7core_dev *i7core_dev) if (pvt->enable_scrub) disable_sdram_scrub_setting(mci); - mce_unregister_decode_chain(&i7_mce_dec); - /* Disable EDAC polling */ i7core_pci_ctl_release(pvt); @@ -2222,8 +2214,6 @@ static int i7core_register_mci(struct i7core_dev *i7core_dev) /* DCLK for scrub rate setting */ pvt->dclk_freq = get_dclk_freq(); - mce_register_decode_chain(&i7_mce_dec); - return 0; fail0: @@ -2367,8 +2357,10 @@ static int __init i7core_init(void) pci_rc = pci_register_driver(&i7core_driver); - if (pci_rc >= 0) + if (pci_rc >= 0) { + mce_register_decode_chain(&i7_mce_dec); return 0; + } i7core_printk(KERN_ERR, "Failed to register device with error %d.\n", pci_rc); @@ -2384,6 +2376,7 @@ static void __exit i7core_exit(void) { debugf2("MC: " __FILE__ ": %s()\n", __func__); pci_unregister_driver(&i7core_driver); + mce_unregister_decode_chain(&i7_mce_dec); } module_init(i7core_init); diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index 4c402353ba98..0e374625f6f8 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -980,7 +980,8 @@ static int __devinit mpc85xx_mc_err_probe(struct platform_device *op) layers[1].type = EDAC_MC_LAYER_CHANNEL; layers[1].size = 1; layers[1].is_virt_csrow = false; - mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), sizeof(*pdata)); + mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers, + sizeof(*pdata)); if (!mci) { devres_release_group(&op->dev, mpc85xx_mc_err_probe); return -ENOMEM; diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index 4adaf4b7da99..36ad17e79d61 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -555,7 +555,7 @@ static int get_dimm_config(struct mem_ctl_info *mci) pvt->is_close_pg = false; } - pci_read_config_dword(pvt->pci_ta, RANK_CFG_A, ®); + pci_read_config_dword(pvt->pci_ddrio, RANK_CFG_A, ®); if (IS_RDIMM_ENABLED(reg)) { /* FIXME: Can also be LRDIMM */ debugf0("Memory is registered\n"); @@ -1604,8 +1604,6 @@ static void sbridge_unregister_mci(struct sbridge_dev *sbridge_dev) debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n", __func__, mci, &sbridge_dev->pdev[0]->dev); - mce_unregister_decode_chain(&sbridge_mce_dec); - /* Remove MC sysfs nodes */ edac_mc_del_mc(mci->dev); @@ -1682,7 +1680,6 @@ static int sbridge_register_mci(struct sbridge_dev *sbridge_dev) goto fail0; } - mce_register_decode_chain(&sbridge_mce_dec); return 0; fail0: @@ -1811,8 +1808,10 @@ static int __init sbridge_init(void) pci_rc = pci_register_driver(&sbridge_driver); - if (pci_rc >= 0) + if (pci_rc >= 0) { + mce_register_decode_chain(&sbridge_mce_dec); return 0; + } sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n", pci_rc); @@ -1828,6 +1827,7 @@ static void __exit sbridge_exit(void) { debugf2("MC: " __FILE__ ": %s()\n", __func__); pci_unregister_driver(&sbridge_driver); + mce_unregister_decode_chain(&sbridge_mce_dec); } module_init(sbridge_init); diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c index 23416e443765..a4ed30bd9a41 100644 --- a/drivers/extcon/extcon-max8997.c +++ b/drivers/extcon/extcon-max8997.c @@ -116,8 +116,8 @@ const char *max8997_extcon_cable[] = { [5] = "Charge-downstream", [6] = "MHL", [7] = "Dock-desk", - [7] = "Dock-card", - [8] = "JIG", + [8] = "Dock-card", + [9] = "JIG", NULL, }; @@ -514,6 +514,7 @@ static int __devexit max8997_muic_remove(struct platform_device *pdev) extcon_dev_unregister(info->edev); + kfree(info->edev); kfree(info); return 0; diff --git a/drivers/extcon/extcon_class.c b/drivers/extcon/extcon_class.c index f598a700ec15..159aeb07b3ba 100644 --- a/drivers/extcon/extcon_class.c +++ b/drivers/extcon/extcon_class.c @@ -762,7 +762,7 @@ int extcon_dev_register(struct extcon_dev *edev, struct device *dev) #if defined(CONFIG_ANDROID) if (switch_class) ret = class_compat_create_link(switch_class, edev->dev, - dev); + NULL); #endif /* CONFIG_ANDROID */ spin_lock_init(&edev->lock); diff --git a/drivers/extcon/extcon_gpio.c b/drivers/extcon/extcon_gpio.c index fe7a07b47336..8a0dcc11c7c7 100644 --- a/drivers/extcon/extcon_gpio.c +++ b/drivers/extcon/extcon_gpio.c @@ -125,6 +125,7 @@ static int __devinit gpio_extcon_probe(struct platform_device *pdev) if (ret < 0) goto err_request_irq; + platform_set_drvdata(pdev, extcon_data); /* Perform initial detection */ gpio_extcon_work(&extcon_data->work.work); @@ -146,6 +147,7 @@ static int __devexit gpio_extcon_remove(struct platform_device *pdev) struct gpio_extcon_data *extcon_data = platform_get_drvdata(pdev); cancel_delayed_work_sync(&extcon_data->work); + free_irq(extcon_data->irq, extcon_data); gpio_free(extcon_data->gpio); extcon_dev_unregister(&extcon_data->edev); devm_kfree(&pdev->dev, extcon_data); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index c4067d0141f7..542f0c04b695 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -136,7 +136,7 @@ config GPIO_MPC8XXX config GPIO_MSM_V1 tristate "Qualcomm MSM GPIO v1" - depends on GPIOLIB && ARCH_MSM + depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50) help Say yes here to support the GPIO interface on ARM v6 based Qualcomm MSM chips. Most of the pins on the MSM can be diff --git a/drivers/gpio/devres.c b/drivers/gpio/devres.c index 9e9947cb86a3..1077754f8289 100644 --- a/drivers/gpio/devres.c +++ b/drivers/gpio/devres.c @@ -98,6 +98,7 @@ int devm_gpio_request_one(struct device *dev, unsigned gpio, return 0; } +EXPORT_SYMBOL(devm_gpio_request_one); /** * devm_gpio_free - free an interrupt diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index c337143b18f8..c89c4c1e668d 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -398,10 +398,12 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev) writel(~0, port->base + GPIO_ISR); if (mxc_gpio_hwtype == IMX21_GPIO) { - /* setup one handler for all GPIO interrupts */ - if (pdev->id == 0) - irq_set_chained_handler(port->irq, - mx2_gpio_irq_handler); + /* + * Setup one handler for all GPIO interrupts. Actually setting + * the handler is needed only once, but doing it for every port + * is more robust and easier. + */ + irq_set_chained_handler(port->irq, mx2_gpio_irq_handler); } else { /* setup one handler for each entry */ irq_set_chained_handler(port->irq, mx3_gpio_irq_handler); diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index c4ed1722734c..4fbc208c32cf 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -174,12 +174,22 @@ static inline void _gpio_dbck_enable(struct gpio_bank *bank) if (bank->dbck_enable_mask && !bank->dbck_enabled) { clk_enable(bank->dbck); bank->dbck_enabled = true; + + __raw_writel(bank->dbck_enable_mask, + bank->base + bank->regs->debounce_en); } } static inline void _gpio_dbck_disable(struct gpio_bank *bank) { if (bank->dbck_enable_mask && bank->dbck_enabled) { + /* + * Disable debounce before cutting it's clock. If debounce is + * enabled but the clock is not, GPIO module seems to be unable + * to detect events and generate interrupts at least on OMAP3. + */ + __raw_writel(0, bank->base + bank->regs->debounce_en); + clk_disable(bank->dbck); bank->dbck_enabled = false; } @@ -1081,7 +1091,6 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) bank->is_mpuio = pdata->is_mpuio; bank->non_wakeup_gpios = pdata->non_wakeup_gpios; bank->loses_context = pdata->loses_context; - bank->get_context_loss_count = pdata->get_context_loss_count; bank->regs = pdata->regs; #ifdef CONFIG_OF_GPIO bank->chip.of_node = of_node_get(node); @@ -1135,6 +1144,9 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) omap_gpio_chip_init(bank); omap_gpio_show_rev(bank); + if (bank->loses_context) + bank->get_context_loss_count = pdata->get_context_loss_count; + pm_runtime_put(bank->dev); list_add_tail(&bank->node, &omap_gpio_list); diff --git a/drivers/gpio/gpio-sta2x11.c b/drivers/gpio/gpio-sta2x11.c index 38416be8ba11..6064fb376e11 100644 --- a/drivers/gpio/gpio-sta2x11.c +++ b/drivers/gpio/gpio-sta2x11.c @@ -383,8 +383,9 @@ static int __devinit gsta_probe(struct platform_device *dev) } spin_lock_init(&chip->lock); gsta_gpio_setup(chip); - for (i = 0; i < GSTA_NR_GPIO; i++) - gsta_set_config(chip, i, gpio_pdata->pinconfig[i]); + if (gpio_pdata) + for (i = 0; i < GSTA_NR_GPIO; i++) + gsta_set_config(chip, i, gpio_pdata->pinconfig[i]); /* 384 was used in previous code: be compatible for other drivers */ err = irq_alloc_descs(-1, 384, GSTA_NR_GPIO, NUMA_NO_NODE); diff --git a/drivers/gpio/gpio-tps65910.c b/drivers/gpio/gpio-tps65910.c index c1ad2884f2ed..11f29c82253c 100644 --- a/drivers/gpio/gpio-tps65910.c +++ b/drivers/gpio/gpio-tps65910.c @@ -149,6 +149,9 @@ static int __devinit tps65910_gpio_probe(struct platform_device *pdev) tps65910_gpio->gpio_chip.set = tps65910_gpio_set; tps65910_gpio->gpio_chip.get = tps65910_gpio_get; tps65910_gpio->gpio_chip.dev = &pdev->dev; +#ifdef CONFIG_OF_GPIO + tps65910_gpio->gpio_chip.of_node = tps65910->dev->of_node; +#endif if (pdata && pdata->gpio_base) tps65910_gpio->gpio_chip.base = pdata->gpio_base; else diff --git a/drivers/gpio/gpio-wm8994.c b/drivers/gpio/gpio-wm8994.c index 92ea5350dfe9..aa61ad2fcaaa 100644 --- a/drivers/gpio/gpio-wm8994.c +++ b/drivers/gpio/gpio-wm8994.c @@ -89,8 +89,11 @@ static int wm8994_gpio_direction_out(struct gpio_chip *chip, struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip); struct wm8994 *wm8994 = wm8994_gpio->wm8994; + if (value) + value = WM8994_GPN_LVL; + return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, - WM8994_GPN_DIR, 0); + WM8994_GPN_DIR | WM8994_GPN_LVL, value); } static void wm8994_gpio_set(struct gpio_chip *chip, unsigned offset, int value) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index eb92fe257a39..a8743c399e83 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -610,7 +610,7 @@ static bool drm_monitor_supports_rb(struct edid *edid) { if (edid->revision >= 4) { - bool ret; + bool ret = false; drm_for_each_detailed_block((u8 *)edid, is_rb, &ret); return ret; } @@ -1039,6 +1039,24 @@ mode_in_range(const struct drm_display_mode *mode, struct edid *edid, return true; } +static bool valid_inferred_mode(const struct drm_connector *connector, + const struct drm_display_mode *mode) +{ + struct drm_display_mode *m; + bool ok = false; + + list_for_each_entry(m, &connector->probed_modes, head) { + if (mode->hdisplay == m->hdisplay && + mode->vdisplay == m->vdisplay && + drm_mode_vrefresh(mode) == drm_mode_vrefresh(m)) + return false; /* duplicated */ + if (mode->hdisplay <= m->hdisplay && + mode->vdisplay <= m->vdisplay) + ok = true; + } + return ok; +} + static int drm_dmt_modes_for_range(struct drm_connector *connector, struct edid *edid, struct detailed_timing *timing) @@ -1048,7 +1066,8 @@ drm_dmt_modes_for_range(struct drm_connector *connector, struct edid *edid, struct drm_device *dev = connector->dev; for (i = 0; i < drm_num_dmt_modes; i++) { - if (mode_in_range(drm_dmt_modes + i, edid, timing)) { + if (mode_in_range(drm_dmt_modes + i, edid, timing) && + valid_inferred_mode(connector, drm_dmt_modes + i)) { newmode = drm_mode_duplicate(dev, &drm_dmt_modes[i]); if (newmode) { drm_mode_probed_add(connector, newmode); @@ -1088,7 +1107,8 @@ drm_gtf_modes_for_range(struct drm_connector *connector, struct edid *edid, return modes; fixup_mode_1366x768(newmode); - if (!mode_in_range(newmode, edid, timing)) { + if (!mode_in_range(newmode, edid, timing) || + !valid_inferred_mode(connector, newmode)) { drm_mode_destroy(dev, newmode); continue; } @@ -1116,7 +1136,8 @@ drm_cvt_modes_for_range(struct drm_connector *connector, struct edid *edid, return modes; fixup_mode_1366x768(newmode); - if (!mode_in_range(newmode, edid, timing)) { + if (!mode_in_range(newmode, edid, timing) || + !valid_inferred_mode(connector, newmode)) { drm_mode_destroy(dev, newmode); continue; } diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c index 9764045428ce..b7e7b49d8f62 100644 --- a/drivers/gpu/drm/gma500/cdv_device.c +++ b/drivers/gpu/drm/gma500/cdv_device.c @@ -78,21 +78,6 @@ static int cdv_backlight_combination_mode(struct drm_device *dev) return REG_READ(BLC_PWM_CTL2) & PWM_LEGACY_MODE; } -static int cdv_get_brightness(struct backlight_device *bd) -{ - struct drm_device *dev = bl_get_data(bd); - u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; - - if (cdv_backlight_combination_mode(dev)) { - u8 lbpc; - - val &= ~1; - pci_read_config_byte(dev->pdev, 0xF4, &lbpc); - val *= lbpc; - } - return val; -} - static u32 cdv_get_max_backlight(struct drm_device *dev) { u32 max = REG_READ(BLC_PWM_CTL); @@ -110,6 +95,22 @@ static u32 cdv_get_max_backlight(struct drm_device *dev) return max; } +static int cdv_get_brightness(struct backlight_device *bd) +{ + struct drm_device *dev = bl_get_data(bd); + u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; + + if (cdv_backlight_combination_mode(dev)) { + u8 lbpc; + + val &= ~1; + pci_read_config_byte(dev->pdev, 0xF4, &lbpc); + val *= lbpc; + } + return (val * 100)/cdv_get_max_backlight(dev); + +} + static int cdv_set_brightness(struct backlight_device *bd) { struct drm_device *dev = bl_get_data(bd); @@ -120,6 +121,9 @@ static int cdv_set_brightness(struct backlight_device *bd) if (level < 1) level = 1; + level *= cdv_get_max_backlight(dev); + level /= 100; + if (cdv_backlight_combination_mode(dev)) { u32 max = cdv_get_max_backlight(dev); u8 lbpc; @@ -157,7 +161,6 @@ static int cdv_backlight_init(struct drm_device *dev) cdv_backlight_device->props.brightness = cdv_get_brightness(cdv_backlight_device); - cdv_backlight_device->props.max_brightness = cdv_get_max_backlight(dev); backlight_update_status(cdv_backlight_device); dev_priv->backlight_device = cdv_backlight_device; return 0; diff --git a/drivers/gpu/drm/gma500/opregion.c b/drivers/gpu/drm/gma500/opregion.c index 4f186eca3a30..c430bd424681 100644 --- a/drivers/gpu/drm/gma500/opregion.c +++ b/drivers/gpu/drm/gma500/opregion.c @@ -144,6 +144,8 @@ struct opregion_asle { #define ASLE_CBLV_VALID (1<<31) +static struct psb_intel_opregion *system_opregion; + static u32 asle_set_backlight(struct drm_device *dev, u32 bclp) { struct drm_psb_private *dev_priv = dev->dev_private; @@ -205,7 +207,7 @@ void psb_intel_opregion_enable_asle(struct drm_device *dev) struct drm_psb_private *dev_priv = dev->dev_private; struct opregion_asle *asle = dev_priv->opregion.asle; - if (asle) { + if (asle && system_opregion ) { /* Don't do this on Medfield or other non PC like devices, they use the bit for something different altogether */ psb_enable_pipestat(dev_priv, 0, PIPE_LEGACY_BLC_EVENT_ENABLE); @@ -221,7 +223,6 @@ void psb_intel_opregion_enable_asle(struct drm_device *dev) #define ACPI_EV_LID (1<<1) #define ACPI_EV_DOCK (1<<2) -static struct psb_intel_opregion *system_opregion; static int psb_intel_opregion_video_event(struct notifier_block *nb, unsigned long val, void *data) @@ -266,9 +267,6 @@ void psb_intel_opregion_init(struct drm_device *dev) system_opregion = opregion; register_acpi_notifier(&psb_intel_opregion_notifier); } - - if (opregion->asle) - psb_intel_opregion_enable_asle(dev); } void psb_intel_opregion_fini(struct drm_device *dev) diff --git a/drivers/gpu/drm/gma500/opregion.h b/drivers/gpu/drm/gma500/opregion.h index 72dc6b921265..4a90f8b0e16c 100644 --- a/drivers/gpu/drm/gma500/opregion.h +++ b/drivers/gpu/drm/gma500/opregion.h @@ -27,6 +27,7 @@ extern void psb_intel_opregion_asle_intr(struct drm_device *dev); extern void psb_intel_opregion_init(struct drm_device *dev); extern void psb_intel_opregion_fini(struct drm_device *dev); extern int psb_intel_opregion_setup(struct drm_device *dev); +extern void psb_intel_opregion_enable_asle(struct drm_device *dev); #else @@ -46,4 +47,8 @@ extern inline int psb_intel_opregion_setup(struct drm_device *dev) { return 0; } + +extern inline void psb_intel_opregion_enable_asle(struct drm_device *dev) +{ +} #endif diff --git a/drivers/gpu/drm/gma500/psb_device.c b/drivers/gpu/drm/gma500/psb_device.c index eff039bf92d4..5971bc82b765 100644 --- a/drivers/gpu/drm/gma500/psb_device.c +++ b/drivers/gpu/drm/gma500/psb_device.c @@ -144,6 +144,10 @@ static int psb_backlight_init(struct drm_device *dev) psb_backlight_device->props.max_brightness = 100; backlight_update_status(psb_backlight_device); dev_priv->backlight_device = psb_backlight_device; + + /* This must occur after the backlight is properly initialised */ + psb_lid_timer_init(dev_priv); + return 0; } @@ -354,13 +358,6 @@ static int psb_chip_setup(struct drm_device *dev) return 0; } -/* Not exactly an erratum more an irritation */ -static void psb_chip_errata(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - psb_lid_timer_init(dev_priv); -} - static void psb_chip_teardown(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; @@ -379,7 +376,6 @@ const struct psb_ops psb_chip_ops = { .sgx_offset = PSB_SGX_OFFSET, .chip_setup = psb_chip_setup, .chip_teardown = psb_chip_teardown, - .errata = psb_chip_errata, .crtc_helper = &psb_intel_helper_funcs, .crtc_funcs = &psb_intel_crtc_funcs, diff --git a/drivers/gpu/drm/gma500/psb_drv.c b/drivers/gpu/drm/gma500/psb_drv.c index caba6e08693c..a8858a907f47 100644 --- a/drivers/gpu/drm/gma500/psb_drv.c +++ b/drivers/gpu/drm/gma500/psb_drv.c @@ -374,6 +374,7 @@ static int psb_driver_load(struct drm_device *dev, unsigned long chipset) if (ret) return ret; + psb_intel_opregion_enable_asle(dev); #if 0 /*enable runtime pm at last*/ pm_runtime_enable(&dev->pdev->dev); diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index f94792626b94..36822b924eb1 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1401,6 +1401,27 @@ i915_mtrr_setup(struct drm_i915_private *dev_priv, unsigned long base, } } +static void i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv) +{ + struct apertures_struct *ap; + struct pci_dev *pdev = dev_priv->dev->pdev; + bool primary; + + ap = alloc_apertures(1); + if (!ap) + return; + + ap->ranges[0].base = dev_priv->dev->agp->base; + ap->ranges[0].size = + dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT; + primary = + pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW; + + remove_conflicting_framebuffers(ap, "inteldrmfb", primary); + + kfree(ap); +} + /** * i915_driver_load - setup chip and create an initial config * @dev: DRM device @@ -1446,6 +1467,15 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) goto free_priv; } + dev_priv->mm.gtt = intel_gtt_get(); + if (!dev_priv->mm.gtt) { + DRM_ERROR("Failed to initialize GTT\n"); + ret = -ENODEV; + goto put_bridge; + } + + i915_kick_out_firmware_fb(dev_priv); + pci_set_master(dev->pdev); /* overlay on gen2 is broken and can't address above 1G */ @@ -1471,13 +1501,6 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) goto put_bridge; } - dev_priv->mm.gtt = intel_gtt_get(); - if (!dev_priv->mm.gtt) { - DRM_ERROR("Failed to initialize GTT\n"); - ret = -ENODEV; - goto out_rmmap; - } - aperture_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT; dev_priv->mm.gtt_mapping = diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index b1fe0edda955..ed3224c37423 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -412,7 +412,6 @@ static void gen6_queue_rps_work(struct drm_i915_private *dev_priv, */ spin_lock_irqsave(&dev_priv->rps_lock, flags); - WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n"); dev_priv->pm_iir |= pm_iir; I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir); POSTING_READ(GEN6_PMIMR); diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 0ede02a99d91..a748e5cabe14 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -740,8 +740,11 @@ static void i915_restore_display(struct drm_device *dev) if (HAS_PCH_SPLIT(dev)) { I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL); I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2); - I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL); + /* NOTE: BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2; + * otherwise we get blank eDP screen after S3 on some machines + */ I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2); + I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL); I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR); diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e0aa064def31..a8538ac0299d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6558,7 +6558,7 @@ static void intel_setup_outputs(struct drm_device *dev) if (I915_READ(HDMIC) & PORT_DETECTED) intel_hdmi_init(dev, HDMIC); - if (I915_READ(HDMID) & PORT_DETECTED) + if (!dpd_is_edp && I915_READ(HDMID) & PORT_DETECTED) intel_hdmi_init(dev, HDMID); if (I915_READ(PCH_DP_C) & DP_DETECTED) @@ -6921,19 +6921,6 @@ static void i915_disable_vga(struct drm_device *dev) POSTING_READ(vga_reg); } -static void ivb_pch_pwm_override(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - - /* - * IVB has CPU eDP backlight regs too, set things up to let the - * PCH regs control the backlight - */ - I915_WRITE(BLC_PWM_CPU_CTL2, PWM_ENABLE); - I915_WRITE(BLC_PWM_CPU_CTL, 0); - I915_WRITE(BLC_PWM_PCH_CTL1, PWM_ENABLE | (1<<30)); -} - void intel_modeset_init_hw(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -6950,9 +6937,6 @@ void intel_modeset_init_hw(struct drm_device *dev) gen6_enable_rps(dev_priv); gen6_update_ring_freq(dev_priv); } - - if (IS_IVYBRIDGE(dev)) - ivb_pch_pwm_override(dev); } void intel_modeset_init(struct drm_device *dev) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 296cfc201a81..c0449324143c 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -32,6 +32,7 @@ #include "drm.h" #include "drm_crtc.h" #include "drm_crtc_helper.h" +#include "drm_edid.h" #include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" @@ -67,6 +68,8 @@ struct intel_dp { struct drm_display_mode *panel_fixed_mode; /* for eDP */ struct delayed_work panel_vdd_work; bool want_panel_vdd; + struct edid *edid; /* cached EDID for eDP */ + int edid_mode_count; }; /** @@ -371,7 +374,7 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, int recv_bytes; uint32_t status; uint32_t aux_clock_divider; - int try, precharge = 5; + int try, precharge; intel_dp_check_edp(intel_dp); /* The clock divider is based off the hrawclk, @@ -391,6 +394,11 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, else aux_clock_divider = intel_hrawclk(dev) / 2; + if (IS_GEN6(dev)) + precharge = 3; + else + precharge = 5; + /* Try to wait for any previous AUX channel activity */ for (try = 0; try < 3; try++) { status = I915_READ(ch_ctl); @@ -1973,6 +1981,8 @@ intel_dp_probe_oui(struct intel_dp *intel_dp) if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT)) return; + ironlake_edp_panel_vdd_on(intel_dp); + if (intel_dp_aux_native_read_retry(intel_dp, DP_SINK_OUI, buf, 3)) DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n", buf[0], buf[1], buf[2]); @@ -1980,6 +1990,8 @@ intel_dp_probe_oui(struct intel_dp *intel_dp) if (intel_dp_aux_native_read_retry(intel_dp, DP_BRANCH_OUI, buf, 3)) DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n", buf[0], buf[1], buf[2]); + + ironlake_edp_panel_vdd_off(intel_dp, false); } static bool @@ -2116,10 +2128,22 @@ intel_dp_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter) { struct intel_dp *intel_dp = intel_attached_dp(connector); struct edid *edid; + int size; + + if (is_edp(intel_dp)) { + if (!intel_dp->edid) + return NULL; + + size = (intel_dp->edid->extensions + 1) * EDID_LENGTH; + edid = kmalloc(size, GFP_KERNEL); + if (!edid) + return NULL; + + memcpy(edid, intel_dp->edid, size); + return edid; + } - ironlake_edp_panel_vdd_on(intel_dp); edid = drm_get_edid(connector, adapter); - ironlake_edp_panel_vdd_off(intel_dp, false); return edid; } @@ -2129,9 +2153,17 @@ intel_dp_get_edid_modes(struct drm_connector *connector, struct i2c_adapter *ada struct intel_dp *intel_dp = intel_attached_dp(connector); int ret; - ironlake_edp_panel_vdd_on(intel_dp); + if (is_edp(intel_dp)) { + drm_mode_connector_update_edid_property(connector, + intel_dp->edid); + ret = drm_add_edid_modes(connector, intel_dp->edid); + drm_edid_to_eld(connector, + intel_dp->edid); + connector->display_info.raw_edid = NULL; + return intel_dp->edid_mode_count; + } + ret = intel_ddc_get_modes(connector, adapter); - ironlake_edp_panel_vdd_off(intel_dp, false); return ret; } @@ -2321,6 +2353,7 @@ static void intel_dp_encoder_destroy(struct drm_encoder *encoder) i2c_del_adapter(&intel_dp->adapter); drm_encoder_cleanup(encoder); if (is_edp(intel_dp)) { + kfree(intel_dp->edid); cancel_delayed_work_sync(&intel_dp->panel_vdd_work); ironlake_panel_vdd_off_sync(intel_dp); } @@ -2504,11 +2537,14 @@ intel_dp_init(struct drm_device *dev, int output_reg) break; } + intel_dp_i2c_init(intel_dp, intel_connector, name); + /* Cache some DPCD data in the eDP case */ if (is_edp(intel_dp)) { bool ret; struct edp_power_seq cur, vbt; u32 pp_on, pp_off, pp_div; + struct edid *edid; pp_on = I915_READ(PCH_PP_ON_DELAYS); pp_off = I915_READ(PCH_PP_OFF_DELAYS); @@ -2576,9 +2612,19 @@ intel_dp_init(struct drm_device *dev, int output_reg) intel_dp_destroy(&intel_connector->base); return; } - } - intel_dp_i2c_init(intel_dp, intel_connector, name); + ironlake_edp_panel_vdd_on(intel_dp); + edid = drm_get_edid(connector, &intel_dp->adapter); + if (edid) { + drm_mode_connector_update_edid_property(connector, + edid); + intel_dp->edid_mode_count = + drm_add_edid_modes(connector, edid); + drm_edid_to_eld(connector, edid); + intel_dp->edid = edid; + } + ironlake_edp_panel_vdd_off(intel_dp, false); + } intel_encoder->hot_plug = intel_dp_hot_plug; diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 153b9a15469b..1074bc5dd418 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -467,7 +467,7 @@ int nouveau_fbcon_init(struct drm_device *dev) nfbdev->helper.funcs = &nouveau_fbcon_helper_funcs; ret = drm_fb_helper_init(dev, &nfbdev->helper, - nv_two_heads(dev) ? 2 : 1, 4); + dev->mode_config.num_crtc, 4); if (ret) { kfree(nfbdev); return ret; diff --git a/drivers/gpu/drm/nouveau/nouveau_prime.c b/drivers/gpu/drm/nouveau/nouveau_prime.c index a89240e5fb29..a25cf2cb931f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_prime.c +++ b/drivers/gpu/drm/nouveau/nouveau_prime.c @@ -1,3 +1,26 @@ +/* + * Copyright 2011 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Dave Airlie + */ #include "drmP.h" #include "drm.h" diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 01d77d1554f4..3904d7964a4b 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1149,7 +1149,9 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc, } if (tiling_flags & RADEON_TILING_MACRO) { - if (rdev->family >= CHIP_CAYMAN) + if (rdev->family >= CHIP_TAHITI) + tmp = rdev->config.si.tile_config; + else if (rdev->family >= CHIP_CAYMAN) tmp = rdev->config.cayman.tile_config; else tmp = rdev->config.evergreen.tile_config; @@ -1177,6 +1179,12 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc, } else if (tiling_flags & RADEON_TILING_MICRO) fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1); + if ((rdev->family == CHIP_TAHITI) || + (rdev->family == CHIP_PITCAIRN)) + fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P8_32x32_8x16); + else if (rdev->family == CHIP_VERDE) + fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P4_8x16); + switch (radeon_crtc->crtc_id) { case 0: WREG32(AVIVO_D1VGA_CONTROL, 0); diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index e7b1ec5ae8c6..486ccdf4aacd 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -1926,7 +1926,9 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) { r600_hdmi_enable(encoder); - if (ASIC_IS_DCE4(rdev)) + if (ASIC_IS_DCE6(rdev)) + ; /* TODO (use pointers instead of if-s?) */ + else if (ASIC_IS_DCE4(rdev)) evergreen_hdmi_setmode(encoder, adjusted_mode); else r600_hdmi_setmode(encoder, adjusted_mode); diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 01550d05e273..7fb3d2e0434c 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -1932,6 +1932,9 @@ static void evergreen_gpu_init(struct radeon_device *rdev) smx_dc_ctl0 |= NUMBER_OF_SETS(rdev->config.evergreen.sx_num_of_sets); WREG32(SMX_DC_CTL0, smx_dc_ctl0); + if (rdev->family <= CHIP_SUMO2) + WREG32(SMX_SAR_CTL0, 0x00010000); + WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_size / 4) - 1) | POSITION_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_pos_size / 4) - 1) | SMX_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_smx_size / 4) - 1))); diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index 4e7dd2b4843d..c16554122ccd 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -52,6 +52,7 @@ struct evergreen_cs_track { u32 cb_color_view[12]; u32 cb_color_pitch[12]; u32 cb_color_slice[12]; + u32 cb_color_slice_idx[12]; u32 cb_color_attrib[12]; u32 cb_color_cmask_slice[8];/* unused */ u32 cb_color_fmask_slice[8];/* unused */ @@ -127,12 +128,14 @@ static void evergreen_cs_track_init(struct evergreen_cs_track *track) track->cb_color_info[i] = 0; track->cb_color_view[i] = 0xFFFFFFFF; track->cb_color_pitch[i] = 0; - track->cb_color_slice[i] = 0; + track->cb_color_slice[i] = 0xfffffff; + track->cb_color_slice_idx[i] = 0; } track->cb_target_mask = 0xFFFFFFFF; track->cb_shader_mask = 0xFFFFFFFF; track->cb_dirty = true; + track->db_depth_slice = 0xffffffff; track->db_depth_view = 0xFFFFC000; track->db_depth_size = 0xFFFFFFFF; track->db_depth_control = 0xFFFFFFFF; @@ -250,10 +253,9 @@ static int evergreen_surface_check_2d(struct radeon_cs_parser *p, { struct evergreen_cs_track *track = p->track; unsigned palign, halign, tileb, slice_pt; + unsigned mtile_pr, mtile_ps, mtileb; tileb = 64 * surf->bpe * surf->nsamples; - palign = track->group_size / (8 * surf->bpe * surf->nsamples); - palign = MAX(8, palign); slice_pt = 1; if (tileb > surf->tsplit) { slice_pt = tileb / surf->tsplit; @@ -262,7 +264,10 @@ static int evergreen_surface_check_2d(struct radeon_cs_parser *p, /* macro tile width & height */ palign = (8 * surf->bankw * track->npipes) * surf->mtilea; halign = (8 * surf->bankh * surf->nbanks) / surf->mtilea; - surf->layer_size = surf->nbx * surf->nby * surf->bpe * slice_pt; + mtileb = (palign / 8) * (halign / 8) * tileb;; + mtile_pr = surf->nbx / palign; + mtile_ps = (mtile_pr * surf->nby) / halign; + surf->layer_size = mtile_ps * mtileb * slice_pt; surf->base_align = (palign / 8) * (halign / 8) * tileb; surf->palign = palign; surf->halign = halign; @@ -434,6 +439,39 @@ static int evergreen_cs_track_validate_cb(struct radeon_cs_parser *p, unsigned i offset += surf.layer_size * mslice; if (offset > radeon_bo_size(track->cb_color_bo[id])) { + /* old ddx are broken they allocate bo with w*h*bpp but + * program slice with ALIGN(h, 8), catch this and patch + * command stream. + */ + if (!surf.mode) { + volatile u32 *ib = p->ib.ptr; + unsigned long tmp, nby, bsize, size, min = 0; + + /* find the height the ddx wants */ + if (surf.nby > 8) { + min = surf.nby - 8; + } + bsize = radeon_bo_size(track->cb_color_bo[id]); + tmp = track->cb_color_bo_offset[id] << 8; + for (nby = surf.nby; nby > min; nby--) { + size = nby * surf.nbx * surf.bpe * surf.nsamples; + if ((tmp + size * mslice) <= bsize) { + break; + } + } + if (nby > min) { + surf.nby = nby; + slice = ((nby * surf.nbx) / 64) - 1; + if (!evergreen_surface_check(p, &surf, "cb")) { + /* check if this one works */ + tmp += surf.layer_size * mslice; + if (tmp <= bsize) { + ib[track->cb_color_slice_idx[id]] = slice; + goto old_ddx_ok; + } + } + } + } dev_warn(p->dev, "%s:%d cb[%d] bo too small (layer size %d, " "offset %d, max layer %d, bo size %ld, slice %d)\n", __func__, __LINE__, id, surf.layer_size, @@ -446,6 +484,7 @@ static int evergreen_cs_track_validate_cb(struct radeon_cs_parser *p, unsigned i surf.tsplit, surf.mtilea); return -EINVAL; } +old_ddx_ok: return 0; } @@ -1532,6 +1571,7 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) case CB_COLOR7_SLICE: tmp = (reg - CB_COLOR0_SLICE) / 0x3c; track->cb_color_slice[tmp] = radeon_get_ib_value(p, idx); + track->cb_color_slice_idx[tmp] = idx; track->cb_dirty = true; break; case CB_COLOR8_SLICE: @@ -1540,6 +1580,7 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) case CB_COLOR11_SLICE: tmp = ((reg - CB_COLOR8_SLICE) / 0x1c) + 8; track->cb_color_slice[tmp] = radeon_get_ib_value(p, idx); + track->cb_color_slice_idx[tmp] = idx; track->cb_dirty = true; break; case CB_COLOR0_ATTRIB: diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index a51f880985f8..65c54160028b 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -156,9 +156,6 @@ void evergreen_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; uint32_t offset; - if (ASIC_IS_DCE5(rdev)) - return; - /* Silent, r600_hdmi_enable will raise WARN for us */ if (!dig->afmt->enabled) return; diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index 2773039b4902..b50b15c70498 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -503,6 +503,7 @@ #define SCRATCH_UMSK 0x8540 #define SCRATCH_ADDR 0x8544 +#define SMX_SAR_CTL0 0xA008 #define SMX_DC_CTL0 0xA020 #define USE_HASH_FUNCTION (1 << 0) #define NUMBER_OF_SETS(x) ((x) << 1) diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 3186522a4458..b7bf18e40215 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1303,6 +1303,10 @@ static int cayman_startup(struct radeon_device *rdev) if (r) return r; + r = r600_audio_init(rdev); + if (r) + return r; + return 0; } @@ -1329,6 +1333,7 @@ int cayman_resume(struct radeon_device *rdev) int cayman_suspend(struct radeon_device *rdev) { + r600_audio_fini(rdev); /* FIXME: we should wait for ring to be empty */ radeon_ib_pool_suspend(rdev); radeon_vm_manager_suspend(rdev); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index f30dc95f83b1..bff627293812 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1839,6 +1839,7 @@ void r600_gpu_init(struct radeon_device *rdev) WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA | NUM_CLIP_SEQ(3))); WREG32(PA_SC_ENHANCE, FORCE_EOV_MAX_CLK_CNT(4095)); + WREG32(VC_ENHANCE, 0); } diff --git a/drivers/gpu/drm/radeon/r600_audio.c b/drivers/gpu/drm/radeon/r600_audio.c index 7479a5c503e4..79b55916cf90 100644 --- a/drivers/gpu/drm/radeon/r600_audio.c +++ b/drivers/gpu/drm/radeon/r600_audio.c @@ -57,7 +57,7 @@ static bool radeon_dig_encoder(struct drm_encoder *encoder) */ static int r600_audio_chipset_supported(struct radeon_device *rdev) { - return (rdev->family >= CHIP_R600 && !ASIC_IS_DCE5(rdev)) + return (rdev->family >= CHIP_R600 && !ASIC_IS_DCE6(rdev)) || rdev->family == CHIP_RS600 || rdev->family == CHIP_RS690 || rdev->family == CHIP_RS740; diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 0133f5f09bd6..ca87f7afaf23 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -2079,6 +2079,48 @@ static int r600_packet3_check(struct radeon_cs_parser *p, return -EINVAL; } break; + case PACKET3_STRMOUT_BASE_UPDATE: + if (p->family < CHIP_RV770) { + DRM_ERROR("STRMOUT_BASE_UPDATE only supported on 7xx\n"); + return -EINVAL; + } + if (pkt->count != 1) { + DRM_ERROR("bad STRMOUT_BASE_UPDATE packet count\n"); + return -EINVAL; + } + if (idx_value > 3) { + DRM_ERROR("bad STRMOUT_BASE_UPDATE index\n"); + return -EINVAL; + } + { + u64 offset; + + r = r600_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("bad STRMOUT_BASE_UPDATE reloc\n"); + return -EINVAL; + } + + if (reloc->robj != track->vgt_strmout_bo[idx_value]) { + DRM_ERROR("bad STRMOUT_BASE_UPDATE, bo does not match\n"); + return -EINVAL; + } + + offset = radeon_get_ib_value(p, idx+1) << 8; + if (offset != track->vgt_strmout_bo_offset[idx_value]) { + DRM_ERROR("bad STRMOUT_BASE_UPDATE, bo offset does not match: 0x%llx, 0x%x\n", + offset, track->vgt_strmout_bo_offset[idx_value]); + return -EINVAL; + } + + if ((offset + 4) > radeon_bo_size(reloc->robj)) { + DRM_ERROR("bad STRMOUT_BASE_UPDATE bo too small: 0x%llx, 0x%lx\n", + offset + 4, radeon_bo_size(reloc->robj)); + return -EINVAL; + } + ib[idx+1] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); + } + break; case PACKET3_SURFACE_BASE_UPDATE: if (p->family >= CHIP_RV770 || p->family == CHIP_R600) { DRM_ERROR("bad SURFACE_BASE_UPDATE\n"); diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index 969c27529dfe..82a0a4c919c0 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -322,9 +322,6 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; uint32_t offset; - if (ASIC_IS_DCE5(rdev)) - return; - /* Silent, r600_hdmi_enable will raise WARN for us */ if (!dig->afmt->enabled) return; @@ -483,7 +480,7 @@ void r600_hdmi_enable(struct drm_encoder *encoder) uint32_t offset; u32 hdmi; - if (ASIC_IS_DCE5(rdev)) + if (ASIC_IS_DCE6(rdev)) return; /* Silent, r600_hdmi_enable will raise WARN for us */ @@ -543,7 +540,7 @@ void r600_hdmi_disable(struct drm_encoder *encoder) struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; uint32_t offset; - if (ASIC_IS_DCE5(rdev)) + if (ASIC_IS_DCE6(rdev)) return; /* Called for ATOM_ENCODER_MODE_HDMI only */ diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index a0dbf1fe6a40..025fd5b6c08c 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -485,6 +485,7 @@ #define TC_L2_SIZE(x) ((x)<<5) #define L2_DISABLE_LATE_HIT (1<<9) +#define VC_ENHANCE 0x9714 #define VGT_CACHE_INVALIDATION 0x88C4 #define CACHE_INVALIDATION(x) ((x)<<0) @@ -1163,6 +1164,7 @@ #define PACKET3_SET_CTL_CONST 0x6F #define PACKET3_SET_CTL_CONST_OFFSET 0x0003cff0 #define PACKET3_SET_CTL_CONST_END 0x0003e200 +#define PACKET3_STRMOUT_BASE_UPDATE 0x72 /* r7xx */ #define PACKET3_SURFACE_BASE_UPDATE 0x73 diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index f0bb2b543b13..2c4d53fd20c5 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -57,9 +57,11 @@ * 2.13.0 - virtual memory support, streamout * 2.14.0 - add evergreen tiling informations * 2.15.0 - add max_pipes query + * 2.16.0 - fix evergreen 2D tiled surface calculation + * 2.17.0 - add STRMOUT_BASE_UPDATE for r7xx */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 15 +#define KMS_DRIVER_MINOR 17 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 59d44937dd9f..84b648a7ddd8 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -289,8 +289,9 @@ int radeon_vm_manager_init(struct radeon_device *rdev) rdev->vm_manager.enabled = false; /* mark first vm as always in use, it's the system one */ + /* allocate enough for 2 full VM pts */ r = radeon_sa_bo_manager_init(rdev, &rdev->vm_manager.sa_manager, - rdev->vm_manager.max_pfn * 8, + rdev->vm_manager.max_pfn * 8 * 2, RADEON_GEM_DOMAIN_VRAM); if (r) { dev_err(rdev->dev, "failed to allocate vm bo (%dKB)\n", @@ -633,7 +634,15 @@ int radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm) mutex_init(&vm->mutex); INIT_LIST_HEAD(&vm->list); INIT_LIST_HEAD(&vm->va); - vm->last_pfn = 0; + /* SI requires equal sized PTs for all VMs, so always set + * last_pfn to max_pfn. cayman allows variable sized + * pts so we can grow then as needed. Once we switch + * to two level pts we can unify this again. + */ + if (rdev->family >= CHIP_TAHITI) + vm->last_pfn = rdev->vm_manager.max_pfn; + else + vm->last_pfn = 0; /* map the ib pool buffer at 0 in virtual address space, set * read only */ diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index f28bd4b7ef98..21ec9f5653ce 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -292,6 +292,7 @@ int radeon_gem_mmap_ioctl(struct drm_device *dev, void *data, int radeon_gem_busy_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) { + struct radeon_device *rdev = dev->dev_private; struct drm_radeon_gem_busy *args = data; struct drm_gem_object *gobj; struct radeon_bo *robj; @@ -317,13 +318,14 @@ int radeon_gem_busy_ioctl(struct drm_device *dev, void *data, break; } drm_gem_object_unreference_unlocked(gobj); - r = radeon_gem_handle_lockup(robj->rdev, r); + r = radeon_gem_handle_lockup(rdev, r); return r; } int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) { + struct radeon_device *rdev = dev->dev_private; struct drm_radeon_gem_wait_idle *args = data; struct drm_gem_object *gobj; struct radeon_bo *robj; @@ -336,10 +338,10 @@ int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data, robj = gem_to_radeon_bo(gobj); r = radeon_bo_wait(robj, NULL, false); /* callback hw specific functions if any */ - if (robj->rdev->asic->ioctl_wait_idle) - robj->rdev->asic->ioctl_wait_idle(robj->rdev, robj); + if (rdev->asic->ioctl_wait_idle) + robj->rdev->asic->ioctl_wait_idle(rdev, robj); drm_gem_object_unreference_unlocked(gobj); - r = radeon_gem_handle_lockup(robj->rdev, r); + r = radeon_gem_handle_lockup(rdev, r); return r; } diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index 08825548ee69..5b37e283ec38 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -801,9 +801,13 @@ static void radeon_dynpm_idle_work_handler(struct work_struct *work) int i; for (i = 0; i < RADEON_NUM_RINGS; ++i) { - not_processed += radeon_fence_count_emitted(rdev, i); - if (not_processed >= 3) - break; + struct radeon_ring *ring = &rdev->ring[i]; + + if (ring->ready) { + not_processed += radeon_fence_count_emitted(rdev, i); + if (not_processed >= 3) + break; + } } if (not_processed >= 3) { /* should upclock */ diff --git a/drivers/gpu/drm/radeon/radeon_prime.c b/drivers/gpu/drm/radeon/radeon_prime.c index 8ddab4c76710..6bef46ace831 100644 --- a/drivers/gpu/drm/radeon/radeon_prime.c +++ b/drivers/gpu/drm/radeon/radeon_prime.c @@ -169,11 +169,17 @@ struct dma_buf *radeon_gem_prime_export(struct drm_device *dev, struct radeon_bo *bo = gem_to_radeon_bo(obj); int ret = 0; - /* pin buffer into GTT */ - ret = radeon_bo_pin(bo, RADEON_GEM_DOMAIN_GTT, NULL); - if (ret) + ret = radeon_bo_reserve(bo, false); + if (unlikely(ret != 0)) return ERR_PTR(ret); + /* pin buffer into GTT */ + ret = radeon_bo_pin(bo, RADEON_GEM_DOMAIN_GTT, NULL); + if (ret) { + radeon_bo_unreserve(bo); + return ERR_PTR(ret); + } + radeon_bo_unreserve(bo); return dma_buf_export(bo, &radeon_dmabuf_ops, obj->size, flags); } diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 4ad0281fdc37..b4f51c569c36 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -616,6 +616,9 @@ static void rv770_gpu_init(struct radeon_device *rdev) ACK_FLUSH_CTL(3) | SYNC_FLUSH_CTL)); + if (rdev->family != CHIP_RV770) + WREG32(SMX_SAR_CTL0, 0x00003f3f); + db_debug3 = RREG32(DB_DEBUG3); db_debug3 &= ~DB_CLK_OFF_DELAY(0x1f); switch (rdev->family) { @@ -792,7 +795,7 @@ static void rv770_gpu_init(struct radeon_device *rdev) WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA | NUM_CLIP_SEQ(3))); - + WREG32(VC_ENHANCE, 0); } void r700_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc) diff --git a/drivers/gpu/drm/radeon/rv770d.h b/drivers/gpu/drm/radeon/rv770d.h index fdc089896011..b0adfc595d75 100644 --- a/drivers/gpu/drm/radeon/rv770d.h +++ b/drivers/gpu/drm/radeon/rv770d.h @@ -211,6 +211,7 @@ #define SCRATCH_UMSK 0x8540 #define SCRATCH_ADDR 0x8544 +#define SMX_SAR_CTL0 0xA008 #define SMX_DC_CTL0 0xA020 #define USE_HASH_FUNCTION (1 << 0) #define CACHE_DEPTH(x) ((x) << 1) @@ -310,6 +311,8 @@ #define TCP_CNTL 0x9610 #define TCP_CHAN_STEER 0x9614 +#define VC_ENHANCE 0x9714 + #define VGT_CACHE_INVALIDATION 0x88C4 #define CACHE_INVALIDATION(x) ((x)<<0) #define VC_ONLY 0 diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index c7b61f16ecfd..0b0279291a73 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2365,12 +2365,12 @@ int si_pcie_gart_enable(struct radeon_device *rdev) WREG32(0x15DC, 0); /* empty context1-15 */ - /* FIXME start with 1G, once using 2 level pt switch to full + /* FIXME start with 4G, once using 2 level pt switch to full * vm size space */ /* set vm size, must be a multiple of 4 */ WREG32(VM_CONTEXT1_PAGE_TABLE_START_ADDR, 0); - WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, (1 << 30) / RADEON_GPU_PAGE_SIZE); + WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, rdev->vm_manager.max_pfn); for (i = 1; i < 16; i++) { if (i < 8) WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2), diff --git a/drivers/gpu/drm/radeon/si_reg.h b/drivers/gpu/drm/radeon/si_reg.h index eda938a7cb6e..501f9d431d57 100644 --- a/drivers/gpu/drm/radeon/si_reg.h +++ b/drivers/gpu/drm/radeon/si_reg.h @@ -30,4 +30,76 @@ #define SI_DC_GPIO_HPD_EN 0x65b8 #define SI_DC_GPIO_HPD_Y 0x65bc +#define SI_GRPH_CONTROL 0x6804 +# define SI_GRPH_DEPTH(x) (((x) & 0x3) << 0) +# define SI_GRPH_DEPTH_8BPP 0 +# define SI_GRPH_DEPTH_16BPP 1 +# define SI_GRPH_DEPTH_32BPP 2 +# define SI_GRPH_NUM_BANKS(x) (((x) & 0x3) << 2) +# define SI_ADDR_SURF_2_BANK 0 +# define SI_ADDR_SURF_4_BANK 1 +# define SI_ADDR_SURF_8_BANK 2 +# define SI_ADDR_SURF_16_BANK 3 +# define SI_GRPH_Z(x) (((x) & 0x3) << 4) +# define SI_GRPH_BANK_WIDTH(x) (((x) & 0x3) << 6) +# define SI_ADDR_SURF_BANK_WIDTH_1 0 +# define SI_ADDR_SURF_BANK_WIDTH_2 1 +# define SI_ADDR_SURF_BANK_WIDTH_4 2 +# define SI_ADDR_SURF_BANK_WIDTH_8 3 +# define SI_GRPH_FORMAT(x) (((x) & 0x7) << 8) +/* 8 BPP */ +# define SI_GRPH_FORMAT_INDEXED 0 +/* 16 BPP */ +# define SI_GRPH_FORMAT_ARGB1555 0 +# define SI_GRPH_FORMAT_ARGB565 1 +# define SI_GRPH_FORMAT_ARGB4444 2 +# define SI_GRPH_FORMAT_AI88 3 +# define SI_GRPH_FORMAT_MONO16 4 +# define SI_GRPH_FORMAT_BGRA5551 5 +/* 32 BPP */ +# define SI_GRPH_FORMAT_ARGB8888 0 +# define SI_GRPH_FORMAT_ARGB2101010 1 +# define SI_GRPH_FORMAT_32BPP_DIG 2 +# define SI_GRPH_FORMAT_8B_ARGB2101010 3 +# define SI_GRPH_FORMAT_BGRA1010102 4 +# define SI_GRPH_FORMAT_8B_BGRA1010102 5 +# define SI_GRPH_FORMAT_RGB111110 6 +# define SI_GRPH_FORMAT_BGR101111 7 +# define SI_GRPH_BANK_HEIGHT(x) (((x) & 0x3) << 11) +# define SI_ADDR_SURF_BANK_HEIGHT_1 0 +# define SI_ADDR_SURF_BANK_HEIGHT_2 1 +# define SI_ADDR_SURF_BANK_HEIGHT_4 2 +# define SI_ADDR_SURF_BANK_HEIGHT_8 3 +# define SI_GRPH_TILE_SPLIT(x) (((x) & 0x7) << 13) +# define SI_ADDR_SURF_TILE_SPLIT_64B 0 +# define SI_ADDR_SURF_TILE_SPLIT_128B 1 +# define SI_ADDR_SURF_TILE_SPLIT_256B 2 +# define SI_ADDR_SURF_TILE_SPLIT_512B 3 +# define SI_ADDR_SURF_TILE_SPLIT_1KB 4 +# define SI_ADDR_SURF_TILE_SPLIT_2KB 5 +# define SI_ADDR_SURF_TILE_SPLIT_4KB 6 +# define SI_GRPH_MACRO_TILE_ASPECT(x) (((x) & 0x3) << 18) +# define SI_ADDR_SURF_MACRO_TILE_ASPECT_1 0 +# define SI_ADDR_SURF_MACRO_TILE_ASPECT_2 1 +# define SI_ADDR_SURF_MACRO_TILE_ASPECT_4 2 +# define SI_ADDR_SURF_MACRO_TILE_ASPECT_8 3 +# define SI_GRPH_ARRAY_MODE(x) (((x) & 0x7) << 20) +# define SI_GRPH_ARRAY_LINEAR_GENERAL 0 +# define SI_GRPH_ARRAY_LINEAR_ALIGNED 1 +# define SI_GRPH_ARRAY_1D_TILED_THIN1 2 +# define SI_GRPH_ARRAY_2D_TILED_THIN1 4 +# define SI_GRPH_PIPE_CONFIG(x) (((x) & 0x1f) << 24) +# define SI_ADDR_SURF_P2 0 +# define SI_ADDR_SURF_P4_8x16 4 +# define SI_ADDR_SURF_P4_16x16 5 +# define SI_ADDR_SURF_P4_16x32 6 +# define SI_ADDR_SURF_P4_32x32 7 +# define SI_ADDR_SURF_P8_16x16_8x16 8 +# define SI_ADDR_SURF_P8_16x32_8x16 9 +# define SI_ADDR_SURF_P8_32x32_8x16 10 +# define SI_ADDR_SURF_P8_16x32_16x16 11 +# define SI_ADDR_SURF_P8_32x32_16x16 12 +# define SI_ADDR_SURF_P8_32x32_16x32 13 +# define SI_ADDR_SURF_P8_32x64_32x32 14 + #endif diff --git a/drivers/gpu/drm/sis/sis_drv.c b/drivers/gpu/drm/sis/sis_drv.c index 30d98d14b5c5..dd14cd1a0033 100644 --- a/drivers/gpu/drm/sis/sis_drv.c +++ b/drivers/gpu/drm/sis/sis_drv.c @@ -47,9 +47,9 @@ static int sis_driver_load(struct drm_device *dev, unsigned long chipset) if (dev_priv == NULL) return -ENOMEM; + idr_init(&dev_priv->object_idr); dev->dev_private = (void *)dev_priv; dev_priv->chipset = chipset; - idr_init(&dev->object_name_idr); return 0; } diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index b67cfcaa661f..36f4b28c1b90 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -1204,6 +1204,7 @@ int ttm_bo_init(struct ttm_bo_device *bdev, (*destroy)(bo); else kfree(bo); + ttm_mem_global_free(mem_glob, acc_size); return -EINVAL; } bo->destroy = destroy; @@ -1307,22 +1308,14 @@ int ttm_bo_create(struct ttm_bo_device *bdev, struct ttm_buffer_object **p_bo) { struct ttm_buffer_object *bo; - struct ttm_mem_global *mem_glob = bdev->glob->mem_glob; size_t acc_size; int ret; - acc_size = ttm_bo_acc_size(bdev, size, sizeof(struct ttm_buffer_object)); - ret = ttm_mem_global_alloc(mem_glob, acc_size, false, false); - if (unlikely(ret != 0)) - return ret; - bo = kzalloc(sizeof(*bo), GFP_KERNEL); - - if (unlikely(bo == NULL)) { - ttm_mem_global_free(mem_glob, acc_size); + if (unlikely(bo == NULL)) return -ENOMEM; - } + acc_size = ttm_bo_acc_size(bdev, size, sizeof(struct ttm_buffer_object)); ret = ttm_bo_init(bdev, bo, size, type, placement, page_alignment, buffer_start, interruptible, persistent_swap_storage, acc_size, NULL, NULL); diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c index 4d02c46a9420..6e52069894b3 100644 --- a/drivers/gpu/drm/udl/udl_drv.c +++ b/drivers/gpu/drm/udl/udl_drv.c @@ -13,8 +13,21 @@ static struct drm_driver driver; +/* + * There are many DisplayLink-based graphics products, all with unique PIDs. + * So we match on DisplayLink's VID + Vendor-Defined Interface Class (0xff) + * We also require a match on SubClass (0x00) and Protocol (0x00), + * which is compatible with all known USB 2.0 era graphics chips and firmware, + * but allows DisplayLink to increment those for any future incompatible chips + */ static struct usb_device_id id_table[] = { - {.idVendor = 0x17e9, .match_flags = USB_DEVICE_ID_MATCH_VENDOR,}, + {.idVendor = 0x17e9, .bInterfaceClass = 0xff, + .bInterfaceSubClass = 0x00, + .bInterfaceProtocol = 0x00, + .match_flags = USB_DEVICE_ID_MATCH_VENDOR | + USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS | + USB_DEVICE_ID_MATCH_INT_PROTOCOL,}, {}, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/gpu/drm/udl/udl_main.c b/drivers/gpu/drm/udl/udl_main.c index a8d5f09428c7..4c2d836a0893 100644 --- a/drivers/gpu/drm/udl/udl_main.c +++ b/drivers/gpu/drm/udl/udl_main.c @@ -61,7 +61,7 @@ static int udl_parse_vendor_descriptor(struct drm_device *dev, u8 length; u16 key; - key = *((u16 *) desc); + key = le16_to_cpu(*((u16 *) desc)); desc += sizeof(u16); length = *desc; desc++; diff --git a/drivers/gpu/drm/via/via_map.c b/drivers/gpu/drm/via/via_map.c index 1f182254e81e..c126182ac07e 100644 --- a/drivers/gpu/drm/via/via_map.c +++ b/drivers/gpu/drm/via/via_map.c @@ -100,12 +100,11 @@ int via_driver_load(struct drm_device *dev, unsigned long chipset) if (dev_priv == NULL) return -ENOMEM; + idr_init(&dev_priv->object_idr); dev->dev_private = (void *)dev_priv; dev_priv->chipset = chipset; - idr_init(&dev->object_name_idr); - pci_set_master(dev->pdev); ret = drm_vblank_init(dev, 1); diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index 38f9534ac513..5b3c7d135dc9 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -190,6 +190,19 @@ find_active_client(struct list_head *head) return NULL; } +int vga_switcheroo_get_client_state(struct pci_dev *pdev) +{ + struct vga_switcheroo_client *client; + + client = find_client_from_pci(&vgasr_priv.clients, pdev); + if (!client) + return VGA_SWITCHEROO_NOT_FOUND; + if (!vgasr_priv.active) + return VGA_SWITCHEROO_INIT; + return client->pwr_state; +} +EXPORT_SYMBOL(vga_switcheroo_get_client_state); + void vga_switcheroo_unregister_client(struct pci_dev *pdev) { struct vga_switcheroo_client *client; @@ -291,8 +304,6 @@ static int vga_switchto_stage1(struct vga_switcheroo_client *new_client) vga_switchon(new_client); vga_set_default_device(new_client->pdev); - set_audio_state(new_client->id, VGA_SWITCHEROO_ON); - return 0; } @@ -308,6 +319,8 @@ static int vga_switchto_stage2(struct vga_switcheroo_client *new_client) active->active = false; + set_audio_state(active->id, VGA_SWITCHEROO_OFF); + if (new_client->fb_info) { struct fb_event event; event.info = new_client->fb_info; @@ -321,11 +334,11 @@ static int vga_switchto_stage2(struct vga_switcheroo_client *new_client) if (new_client->ops->reprobe) new_client->ops->reprobe(new_client->pdev); - set_audio_state(active->id, VGA_SWITCHEROO_OFF); - if (active->pwr_state == VGA_SWITCHEROO_ON) vga_switchoff(active); + set_audio_state(new_client->id, VGA_SWITCHEROO_ON); + new_client->active = true; return 0; } @@ -371,8 +384,9 @@ vga_switcheroo_debugfs_write(struct file *filp, const char __user *ubuf, /* pwr off the device not in use */ if (strncmp(usercmd, "OFF", 3) == 0) { list_for_each_entry(client, &vgasr_priv.clients, list) { - if (client->active) + if (client->active || client_is_audio(client)) continue; + set_audio_state(client->id, VGA_SWITCHEROO_OFF); if (client->pwr_state == VGA_SWITCHEROO_ON) vga_switchoff(client); } @@ -381,10 +395,11 @@ vga_switcheroo_debugfs_write(struct file *filp, const char __user *ubuf, /* pwr on the device not in use */ if (strncmp(usercmd, "ON", 2) == 0) { list_for_each_entry(client, &vgasr_priv.clients, list) { - if (client->active) + if (client->active || client_is_audio(client)) continue; if (client->pwr_state == VGA_SWITCHEROO_OFF) vga_switchon(client); + set_audio_state(client->id, VGA_SWITCHEROO_ON); } goto out; } diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 034c80a10f1f..3fda8c87f02c 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -1,20 +1,11 @@ # # HID driver configuration # -menuconfig HID_SUPPORT - bool "HID Devices" - depends on INPUT - default y - ---help--- - Say Y here to get to see options for various computer-human interface - device drivers. This option alone does not add any kernel code. - - If you say N, all options in this submenu will be skipped and disabled. - -if HID_SUPPORT +menu "HID support" + depends on INPUT config HID - tristate "Generic HID support" + tristate "HID bus support" depends on INPUT default y ---help--- @@ -23,14 +14,17 @@ config HID most commonly used to refer to the USB-HID specification, but other devices (such as, but not strictly limited to, Bluetooth) are designed using HID specification (this involves certain keyboards, - mice, tablets, etc). This option compiles into kernel the generic - HID layer code (parser, usages, etc.), which can then be used by - transport-specific HID implementation (like USB or Bluetooth). + mice, tablets, etc). This option adds the HID bus to the kernel, + together with generic HID layer code. The HID devices are added and + removed from the HID bus by the transport-layer drivers, such as + usbhid (USB_HID) and hidp (BT_HIDP). For docs and specs, see http://www.usb.org/developers/hidpage/ If unsure, say Y. +if HID + config HID_BATTERY_STRENGTH bool "Battery level reporting for HID devices" depends on HID && POWER_SUPPLY && HID = POWER_SUPPLY @@ -59,23 +53,22 @@ config HIDRAW If unsure, say Y. -source "drivers/hid/usbhid/Kconfig" - -menu "Special HID drivers" - depends on HID - config HID_GENERIC tristate "Generic HID driver" depends on HID - default y + default HID ---help--- - Support for generic HID devices. + Support for generic devices on the HID bus. This includes most + keyboards and mice, joysticks, tablets and digitizers. To compile this driver as a module, choose M here: the module will be called hid-generic. If unsure, say Y. +menu "Special HID drivers" + depends on HID + config HID_A4TECH tristate "A4 tech mice" if EXPERT depends on USB_HID @@ -393,6 +386,7 @@ config HID_MULTITOUCH - Unitec Panels - XAT optical touch panels - Xiroku optical touch panels + - Zytronic touch panels If unsure, say N. @@ -662,4 +656,8 @@ config HID_ZYDACRON endmenu -endif # HID_SUPPORT +endif # HID + +source "drivers/hid/usbhid/Kconfig" + +endmenu diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index fa10f847f7db..585344b6d338 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -517,6 +517,12 @@ static const struct hid_device_id apple_devices[] = { .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI), + .driver_data = APPLE_HAS_FN }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO), + .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS), + .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO), diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 8e3a6b261477..4c87276c8ddb 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1503,6 +1503,9 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) }, @@ -1880,6 +1883,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM)}, { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM2)}, { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, + { HID_USB_DEVICE(USB_VENDOR_ID_AXENTIA, USB_DEVICE_ID_AXENTIA_FM_RADIO) }, { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) }, @@ -1994,6 +1998,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MCT) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) }, + { HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_BEATPAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS) }, { HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1) }, @@ -2088,6 +2093,9 @@ static const struct hid_device_id hid_mouse_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { } diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 9373f535dfe9..32039235cfee 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -125,6 +125,9 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI 0x024c #define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO 0x024d #define USB_DEVICE_ID_APPLE_WELLSPRING6_JIS 0x024e +#define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262 +#define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263 +#define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b @@ -160,6 +163,9 @@ #define USB_VENDOR_ID_AVERMEDIA 0x07ca #define USB_DEVICE_ID_AVER_FM_MR800 0xb800 +#define USB_VENDOR_ID_AXENTIA 0x12cf +#define USB_DEVICE_ID_AXENTIA_FM_RADIO 0x7111 + #define USB_VENDOR_ID_BAANTO 0x2453 #define USB_DEVICE_ID_BAANTO_MT_190W2 0x0100 @@ -515,6 +521,9 @@ #define USB_DEVICE_ID_CRYSTALTOUCH 0x0006 #define USB_DEVICE_ID_CRYSTALTOUCH_DUAL 0x0007 +#define USB_VENDOR_ID_MADCATZ 0x0738 +#define USB_DEVICE_ID_MADCATZ_BEATPAD 0x4540 + #define USB_VENDOR_ID_MCC 0x09db #define USB_DEVICE_ID_MCC_PMD1024LS 0x0076 #define USB_DEVICE_ID_MCC_PMD1208LS 0x007a @@ -650,6 +659,9 @@ #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001 #define USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE 0x0600 +#define USB_VENDOR_ID_SENNHEISER 0x1395 +#define USB_DEVICE_ID_SENNHEISER_BTD500USB 0x002c + #define USB_VENDOR_ID_SIGMA_MICRO 0x1c4f #define USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD 0x0002 @@ -799,6 +811,9 @@ #define USB_VENDOR_ID_ZYDACRON 0x13EC #define USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL 0x0006 +#define USB_VENDOR_ID_ZYTRONIC 0x14c8 +#define USB_DEVICE_ID_ZYTRONIC_ZXY100 0x0005 + #define USB_VENDOR_ID_PRIMAX 0x0461 #define USB_DEVICE_ID_PRIMAX_KEYBOARD 0x4e05 diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 132b0019365e..5301006f6c15 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -301,6 +301,9 @@ static const struct hid_device_id hid_battery_quirks[] = { { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI), HID_BATTERY_QUIRK_PERCENT | HID_BATTERY_QUIRK_FEATURE }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, + USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI), + HID_BATTERY_QUIRK_PERCENT | HID_BATTERY_QUIRK_FEATURE }, {} }; diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index 5e8a7ed42344..0f9c146fc00d 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -436,27 +436,37 @@ static int logi_dj_recv_send_report(struct dj_receiver_dev *djrcv_dev, static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) { - struct dj_report dj_report; + struct dj_report *dj_report; + int retval; - memset(&dj_report, 0, sizeof(dj_report)); - dj_report.report_id = REPORT_ID_DJ_SHORT; - dj_report.device_index = 0xFF; - dj_report.report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES; - return logi_dj_recv_send_report(djrcv_dev, &dj_report); + dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL); + if (!dj_report) + return -ENOMEM; + dj_report->report_id = REPORT_ID_DJ_SHORT; + dj_report->device_index = 0xFF; + dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES; + retval = logi_dj_recv_send_report(djrcv_dev, dj_report); + kfree(dj_report); + return retval; } static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, unsigned timeout) { - struct dj_report dj_report; + struct dj_report *dj_report; + int retval; - memset(&dj_report, 0, sizeof(dj_report)); - dj_report.report_id = REPORT_ID_DJ_SHORT; - dj_report.device_index = 0xFF; - dj_report.report_type = REPORT_TYPE_CMD_SWITCH; - dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F; - dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout; - return logi_dj_recv_send_report(djrcv_dev, &dj_report); + dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL); + if (!dj_report) + return -ENOMEM; + dj_report->report_id = REPORT_ID_DJ_SHORT; + dj_report->device_index = 0xFF; + dj_report->report_type = REPORT_TYPE_CMD_SWITCH; + dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F; + dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout; + retval = logi_dj_recv_send_report(djrcv_dev, dj_report); + kfree(dj_report); + return retval; } diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index 7cf3ffe4b7bc..40ac6654f1d1 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -426,8 +426,10 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h __set_bit(EV_ABS, input->evbit); input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0); - input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0); - input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255 << 2, + 4, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255 << 2, + 4, 0); input_set_abs_params(input, ABS_MT_ORIENTATION, -31, 32, 1, 0); /* Note: Touch Y position from the device is inverted relative diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 6e3332a99976..76479246d4ee 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -1048,6 +1048,11 @@ static const struct hid_device_id mt_devices[] = { MT_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_CSR2) }, + /* Zytronic panels */ + { .driver_data = MT_CLS_SERIAL, + MT_USB_DEVICE(USB_VENDOR_ID_ZYTRONIC, + USB_DEVICE_ID_ZYTRONIC_ZXY100) }, + /* Generic MT device */ { HID_DEVICE(HID_BUS_ANY, HID_GROUP_MULTITOUCH, HID_ANY_ID, HID_ANY_ID) }, { } diff --git a/drivers/hid/usbhid/Kconfig b/drivers/hid/usbhid/Kconfig index 0f20fd17cf06..0108c5991a04 100644 --- a/drivers/hid/usbhid/Kconfig +++ b/drivers/hid/usbhid/Kconfig @@ -1,13 +1,13 @@ -comment "USB Input Devices" +menu "USB HID support" depends on USB config USB_HID - tristate "USB Human Interface Device (full HID) support" + tristate "USB HID transport layer" default y depends on USB && INPUT select HID ---help--- - Say Y here if you want full HID support to connect USB keyboards, + Say Y here if you want to connect USB keyboards, mice, joysticks, graphic tablets, or any other HID based devices to your computer via USB, as well as Uninterruptible Power Supply (UPS) and monitor control devices. @@ -81,4 +81,4 @@ config USB_MOUSE endmenu - +endmenu diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 0597ee604f6e..903eef3d3e10 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -76,6 +76,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET }, { USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET }, { USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB, HID_QUIRK_NOGET }, { USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET }, { USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_1, HID_QUIRK_NOGET }, { USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_2, HID_QUIRK_NOGET }, diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index f082e48ab113..2cde9ecf7731 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -8,7 +8,7 @@ * * Based on hdaps.c driver: * Copyright (C) 2005 Robert Love - * Copyright (C) 2005 Jesper Juhl + * Copyright (C) 2005 Jesper Juhl * * Fan control based on smcFanControl: * Copyright (C) 2006 Hendrik Holtmann @@ -215,7 +215,7 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) int i; if (send_command(cmd) || send_argument(key)) { - pr_warn("%s: read arg fail\n", key); + pr_warn("%.4s: read arg fail\n", key); return -EIO; } @@ -223,7 +223,7 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) for (i = 0; i < len; i++) { if (__wait_status(0x05)) { - pr_warn("%s: read data fail\n", key); + pr_warn("%.4s: read data fail\n", key); return -EIO; } buffer[i] = inb(APPLESMC_DATA_PORT); diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index b9d512331ed4..637c51c11b44 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -191,6 +191,24 @@ static ssize_t show_temp(struct device *dev, return tdata->valid ? sprintf(buf, "%d\n", tdata->temp) : -EAGAIN; } +struct tjmax { + char const *id; + int tjmax; +}; + +static struct tjmax __cpuinitconst tjmax_table[] = { + { "CPU D410", 100000 }, + { "CPU D425", 100000 }, + { "CPU D510", 100000 }, + { "CPU D525", 100000 }, + { "CPU N450", 100000 }, + { "CPU N455", 100000 }, + { "CPU N470", 100000 }, + { "CPU N475", 100000 }, + { "CPU 230", 100000 }, + { "CPU 330", 125000 }, +}; + static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) { @@ -202,6 +220,13 @@ static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, int err; u32 eax, edx; struct pci_dev *host_bridge; + int i; + + /* explicit tjmax table entries override heuristics */ + for (i = 0; i < ARRAY_SIZE(tjmax_table); i++) { + if (strstr(c->x86_model_id, tjmax_table[i].id)) + return tjmax_table[i].tjmax; + } /* Early chips have no MSR for TjMax */ @@ -210,7 +235,8 @@ static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, /* Atom CPUs */ - if (c->x86_model == 0x1c) { + if (c->x86_model == 0x1c || c->x86_model == 0x26 + || c->x86_model == 0x27) { usemsr_ee = 0; host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); @@ -223,6 +249,9 @@ static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, tjmax = 90000; pci_dev_put(host_bridge); + } else if (c->x86_model == 0x36) { + usemsr_ee = 0; + tjmax = 100000; } if (c->x86_model > 0xe && usemsr_ee) { @@ -664,7 +693,7 @@ static void __cpuinit get_core_online(unsigned int cpu) * sensors. We check this bit only, all the early CPUs * without thermal sensors will be filtered out. */ - if (!cpu_has(c, X86_FEATURE_DTS)) + if (!cpu_has(c, X86_FEATURE_DTHERM)) return; if (!pdev) { @@ -765,14 +794,14 @@ static struct notifier_block coretemp_cpu_notifier __refdata = { }; static const struct x86_cpu_id coretemp_ids[] = { - { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTS }, + { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTHERM }, {} }; MODULE_DEVICE_TABLE(x86cpu, coretemp_ids); static int __init coretemp_init(void) { - int i, err = -ENODEV; + int i, err; /* * CPUID.06H.EAX[0] indicates whether the CPU has thermal diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c index 9691f664c76e..e7d234b59312 100644 --- a/drivers/hwmon/emc2103.c +++ b/drivers/hwmon/emc2103.c @@ -451,11 +451,15 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *da, data->fan_rpm_control = true; break; default: - mutex_unlock(&data->update_lock); - return -EINVAL; + count = -EINVAL; + goto err; } - read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg); + result = read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg); + if (result) { + count = result; + goto err; + } if (data->fan_rpm_control) conf_reg |= 0x80; @@ -463,7 +467,7 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *da, conf_reg &= ~0x80; i2c_smbus_write_byte_data(client, REG_FAN_CONF1, conf_reg); - +err: mutex_unlock(&data->update_lock); return count; } diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index e7701d99f8e8..f1de3979181f 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -2341,7 +2341,7 @@ static void __devinit it87_init_device(struct platform_device *pdev) /* Start monitoring */ it87_write_value(data, IT87_REG_CONFIG, - (it87_read_value(data, IT87_REG_CONFIG) & 0x36) + (it87_read_value(data, IT87_REG_CONFIG) & 0x3e) | (update_vbat ? 0x41 : 0x01)); } diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index a9bfd6736d9a..e72ba5d2a824 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -590,6 +590,6 @@ abort: module_i2c_driver(jc42_driver); -MODULE_AUTHOR("Guenter Roeck "); +MODULE_AUTHOR("Guenter Roeck "); MODULE_DESCRIPTION("JC42 driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/lineage-pem.c b/drivers/hwmon/lineage-pem.c index d264937c7f5e..bd75d2415432 100644 --- a/drivers/hwmon/lineage-pem.c +++ b/drivers/hwmon/lineage-pem.c @@ -567,6 +567,6 @@ static struct i2c_driver pem_driver = { module_i2c_driver(pem_driver); -MODULE_AUTHOR("Guenter Roeck "); +MODULE_AUTHOR("Guenter Roeck "); MODULE_DESCRIPTION("Lineage CPL PEM hardware monitoring driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/ltc4261.c b/drivers/hwmon/ltc4261.c index 069b7d34d8f9..77476a575c4e 100644 --- a/drivers/hwmon/ltc4261.c +++ b/drivers/hwmon/ltc4261.c @@ -292,6 +292,6 @@ static struct i2c_driver ltc4261_driver = { module_i2c_driver(ltc4261_driver); -MODULE_AUTHOR("Guenter Roeck "); +MODULE_AUTHOR("Guenter Roeck "); MODULE_DESCRIPTION("LTC4261 driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/max16065.c b/drivers/hwmon/max16065.c index 822261be84dd..019427d7a5fd 100644 --- a/drivers/hwmon/max16065.c +++ b/drivers/hwmon/max16065.c @@ -692,6 +692,6 @@ static struct i2c_driver max16065_driver = { module_i2c_driver(max16065_driver); -MODULE_AUTHOR("Guenter Roeck "); +MODULE_AUTHOR("Guenter Roeck "); MODULE_DESCRIPTION("MAX16065 driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwspinlock/hwspinlock_core.c b/drivers/hwspinlock/hwspinlock_core.c index 61c9cf15fa52..1201a15784c3 100644 --- a/drivers/hwspinlock/hwspinlock_core.c +++ b/drivers/hwspinlock/hwspinlock_core.c @@ -345,7 +345,7 @@ int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev, spin_lock_init(&hwlock->lock); hwlock->bank = bank; - ret = hwspin_lock_register_single(hwlock, i); + ret = hwspin_lock_register_single(hwlock, base_id + i); if (ret) goto reg_failed; } @@ -354,7 +354,7 @@ int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev, reg_failed: while (--i >= 0) - hwspin_lock_unregister_single(i); + hwspin_lock_unregister_single(base_id + i); return ret; } EXPORT_SYMBOL_GPL(hwspin_lock_register); diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 8716066a2f2b..bcb507b0cfd4 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -236,7 +236,7 @@ static const struct ide_port_ops icside_v6_no_dma_port_ops = { */ static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - unsigned long cycle_time; + unsigned long cycle_time = 0; int use_dma_info = 0; const u8 xfer_mode = drive->dma_mode; @@ -271,9 +271,9 @@ static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) ide_set_drivedata(drive, (void *)cycle_time); - printk("%s: %s selected (peak %dMB/s)\n", drive->name, - ide_xfer_verbose(xfer_mode), - 2000 / (unsigned long)ide_get_drivedata(drive)); + printk(KERN_INFO "%s: %s selected (peak %luMB/s)\n", + drive->name, ide_xfer_verbose(xfer_mode), + 2000 / (cycle_time ? cycle_time : (unsigned long) -1)); } static const struct ide_port_ops icside_v6_port_ops = { @@ -375,8 +375,6 @@ static const struct ide_dma_ops icside_v6_dma_ops = { .dma_test_irq = icside_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, }; -#else -#define icside_v6_dma_ops NULL #endif static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d) @@ -456,7 +454,6 @@ err_free: static const struct ide_port_info icside_v6_port_info __initdata = { .init_dma = icside_dma_off_init, .port_ops = &icside_v6_no_dma_port_ops, - .dma_ops = &icside_v6_dma_ops, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO, .mwdma_mask = ATA_MWDMA2, .swdma_mask = ATA_SWDMA2, @@ -518,11 +515,13 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) ecard_set_drvdata(ec, state); +#ifdef CONFIG_BLK_DEV_IDEDMA_ICS if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { d.init_dma = icside_dma_init; d.port_ops = &icside_v6_port_ops; - } else - d.dma_ops = NULL; + d.dma_ops = &icside_v6_dma_ops; + } +#endif ret = ide_host_register(host, &d, hws); if (ret) diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 28e344ea514c..f1e922e2479a 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -167,7 +167,8 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data) { int *is_kme = priv_data; - if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) { + if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH) + != IO_DATA_PATH_WIDTH_8) { pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; } diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index d0f59c3f87ef..a759a4c4bb0a 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -169,6 +169,38 @@ static struct cpuidle_state snb_cstates[MWAIT_MAX_NUM_CSTATES] = { .enter = &intel_idle }, }; +static struct cpuidle_state ivb_cstates[MWAIT_MAX_NUM_CSTATES] = { + { /* MWAIT C0 */ }, + { /* MWAIT C1 */ + .name = "C1-IVB", + .desc = "MWAIT 0x00", + .flags = CPUIDLE_FLAG_TIME_VALID, + .exit_latency = 1, + .target_residency = 1, + .enter = &intel_idle }, + { /* MWAIT C2 */ + .name = "C3-IVB", + .desc = "MWAIT 0x10", + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, + .exit_latency = 59, + .target_residency = 156, + .enter = &intel_idle }, + { /* MWAIT C3 */ + .name = "C6-IVB", + .desc = "MWAIT 0x20", + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, + .exit_latency = 80, + .target_residency = 300, + .enter = &intel_idle }, + { /* MWAIT C4 */ + .name = "C7-IVB", + .desc = "MWAIT 0x30", + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, + .exit_latency = 87, + .target_residency = 300, + .enter = &intel_idle }, +}; + static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = { { /* MWAIT C0 */ }, { /* MWAIT C1 */ @@ -347,6 +379,10 @@ static const struct idle_cpu idle_cpu_snb = { .state_table = snb_cstates, }; +static const struct idle_cpu idle_cpu_ivb = { + .state_table = ivb_cstates, +}; + #define ICPU(model, cpu) \ { X86_VENDOR_INTEL, 6, model, X86_FEATURE_MWAIT, (unsigned long)&cpu } @@ -362,6 +398,7 @@ static const struct x86_cpu_id intel_idle_ids[] = { ICPU(0x2f, idle_cpu_nehalem), ICPU(0x2a, idle_cpu_snb), ICPU(0x2d, idle_cpu_snb), + ICPU(0x3a, idle_cpu_ivb), {} }; MODULE_DEVICE_TABLE(x86cpu, intel_idle_ids); diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index 56eecefcec75..2ec93da41e2c 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -8,8 +8,7 @@ menuconfig IIO help The industrial I/O subsystem provides a unified framework for drivers for many different types of embedded sensors using a - number of different physical interfaces (i2c, spi, etc). See - Documentation/iio for more information. + number of different physical interfaces (i2c, spi, etc). if IIO diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 1ddd8861c71b..4f947e4377ef 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -661,7 +661,6 @@ static int iio_device_register_sysfs(struct iio_dev *indio_dev) * New channel registration method - relies on the fact a group does * not need to be initialized if it is name is NULL. */ - INIT_LIST_HEAD(&indio_dev->channel_attr_list); if (indio_dev->channels) for (i = 0; i < indio_dev->num_channels; i++) { ret = iio_device_add_channel_sysfs(indio_dev, @@ -725,12 +724,16 @@ static void iio_device_unregister_sysfs(struct iio_dev *indio_dev) static void iio_dev_release(struct device *device) { struct iio_dev *indio_dev = dev_to_iio_dev(device); - cdev_del(&indio_dev->chrdev); + if (indio_dev->chrdev.dev) + cdev_del(&indio_dev->chrdev); if (indio_dev->modes & INDIO_BUFFER_TRIGGERED) iio_device_unregister_trigger_consumer(indio_dev); iio_device_unregister_eventset(indio_dev); iio_device_unregister_sysfs(indio_dev); iio_device_unregister_debugfs(indio_dev); + + ida_simple_remove(&iio_ida, indio_dev->id); + kfree(indio_dev); } static struct device_type iio_dev_type = { @@ -761,6 +764,7 @@ struct iio_dev *iio_device_alloc(int sizeof_priv) dev_set_drvdata(&dev->dev, (void *)dev); mutex_init(&dev->mlock); mutex_init(&dev->info_exist_lock); + INIT_LIST_HEAD(&dev->channel_attr_list); dev->id = ida_simple_get(&iio_ida, 0, 0, GFP_KERNEL); if (dev->id < 0) { @@ -778,10 +782,8 @@ EXPORT_SYMBOL(iio_device_alloc); void iio_device_free(struct iio_dev *dev) { - if (dev) { - ida_simple_remove(&iio_ida, dev->id); - kfree(dev); - } + if (dev) + put_device(&dev->dev); } EXPORT_SYMBOL(iio_device_free); @@ -902,7 +904,7 @@ void iio_device_unregister(struct iio_dev *indio_dev) mutex_lock(&indio_dev->info_exist_lock); indio_dev->info = NULL; mutex_unlock(&indio_dev->info_exist_lock); - device_unregister(&indio_dev->dev); + device_del(&indio_dev->dev); } EXPORT_SYMBOL(iio_device_unregister); subsys_initcall(iio_init); diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 55d5642eb10a..2e826f9702c6 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1184,7 +1184,7 @@ static void cma_set_req_event_data(struct rdma_cm_event *event, static int cma_check_req_qp_type(struct rdma_cm_id *id, struct ib_cm_event *ib_event) { - return (((ib_event->event == IB_CM_REQ_RECEIVED) || + return (((ib_event->event == IB_CM_REQ_RECEIVED) && (ib_event->param.req_rcvd.qp_type == id->qp_type)) || ((ib_event->event == IB_CM_SIDR_REQ_RECEIVED) && (id->qp_type == IB_QPT_UD)) || diff --git a/drivers/infiniband/hw/ocrdma/ocrdma.h b/drivers/infiniband/hw/ocrdma/ocrdma.h index 037f5cea85bd..48970af23679 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma.h +++ b/drivers/infiniband/hw/ocrdma/ocrdma.h @@ -61,6 +61,7 @@ struct ocrdma_dev_attr { u32 max_inline_data; int max_send_sge; int max_recv_sge; + int max_srq_sge; int max_mr; u64 max_mr_size; u32 max_num_mr_pbl; diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index 9343a1522977..71942af4fce9 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -990,8 +990,6 @@ static void ocrdma_get_attr(struct ocrdma_dev *dev, struct ocrdma_dev_attr *attr, struct ocrdma_mbx_query_config *rsp) { - int max_q_mem; - attr->max_pd = (rsp->max_pd_ca_ack_delay & OCRDMA_MBX_QUERY_CFG_MAX_PD_MASK) >> OCRDMA_MBX_QUERY_CFG_MAX_PD_SHIFT; @@ -1004,6 +1002,9 @@ static void ocrdma_get_attr(struct ocrdma_dev *dev, attr->max_recv_sge = (rsp->max_write_send_sge & OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK) >> OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT; + attr->max_srq_sge = (rsp->max_srq_rqe_sge & + OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_MASK) >> + OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_OFFSET; attr->max_ord_per_qp = (rsp->max_ird_ord_per_qp & OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK) >> OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT; @@ -1037,18 +1038,15 @@ static void ocrdma_get_attr(struct ocrdma_dev *dev, attr->max_inline_data = attr->wqe_size - (sizeof(struct ocrdma_hdr_wqe) + sizeof(struct ocrdma_sge)); - max_q_mem = OCRDMA_Q_PAGE_BASE_SIZE << (OCRDMA_MAX_Q_PAGE_SIZE_CNT - 1); - /* hw can queue one less then the configured size, - * so publish less by one to stack. - */ if (dev->nic_info.dev_family == OCRDMA_GEN2_FAMILY) { - dev->attr.max_wqe = max_q_mem / dev->attr.wqe_size; attr->ird = 1; attr->ird_page_size = OCRDMA_MIN_Q_PAGE_SIZE; attr->num_ird_pages = MAX_OCRDMA_IRD_PAGES; - } else - dev->attr.max_wqe = (max_q_mem / dev->attr.wqe_size) - 1; - dev->attr.max_rqe = (max_q_mem / dev->attr.rqe_size) - 1; + } + dev->attr.max_wqe = rsp->max_wqes_rqes_per_q >> + OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET; + dev->attr.max_rqe = rsp->max_wqes_rqes_per_q & + OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_MASK; } static int ocrdma_check_fw_config(struct ocrdma_dev *dev, diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_main.c b/drivers/infiniband/hw/ocrdma/ocrdma_main.c index 04fef3de6d75..b050e629e9c3 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_main.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_main.c @@ -97,13 +97,11 @@ static void ocrdma_build_sgid_mac(union ib_gid *sgid, unsigned char *mac_addr, sgid->raw[15] = mac_addr[5]; } -static void ocrdma_add_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr, +static bool ocrdma_add_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr, bool is_vlan, u16 vlan_id) { int i; - bool found = false; union ib_gid new_sgid; - int free_idx = OCRDMA_MAX_SGID; unsigned long flags; memset(&ocrdma_zero_sgid, 0, sizeof(union ib_gid)); @@ -115,23 +113,19 @@ static void ocrdma_add_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr, if (!memcmp(&dev->sgid_tbl[i], &ocrdma_zero_sgid, sizeof(union ib_gid))) { /* found free entry */ - if (!found) { - free_idx = i; - found = true; - break; - } + memcpy(&dev->sgid_tbl[i], &new_sgid, + sizeof(union ib_gid)); + spin_unlock_irqrestore(&dev->sgid_lock, flags); + return true; } else if (!memcmp(&dev->sgid_tbl[i], &new_sgid, sizeof(union ib_gid))) { /* entry already present, no addition is required. */ spin_unlock_irqrestore(&dev->sgid_lock, flags); - return; + return false; } } - /* if entry doesn't exist and if table has some space, add entry */ - if (found) - memcpy(&dev->sgid_tbl[free_idx], &new_sgid, - sizeof(union ib_gid)); spin_unlock_irqrestore(&dev->sgid_lock, flags); + return false; } static bool ocrdma_del_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr, @@ -167,7 +161,8 @@ static void ocrdma_add_default_sgid(struct ocrdma_dev *dev) ocrdma_get_guid(dev, &sgid->raw[8]); } -static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev) +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev) { struct net_device *netdev, *tmp; u16 vlan_id; @@ -175,8 +170,6 @@ static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev) netdev = dev->nic_info.netdev; - ocrdma_add_default_sgid(dev); - rcu_read_lock(); for_each_netdev_rcu(&init_net, tmp) { if (netdev == tmp || vlan_dev_real_dev(tmp) == netdev) { @@ -194,10 +187,23 @@ static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev) } } rcu_read_unlock(); +} +#else +static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev) +{ + +} +#endif /* VLAN */ + +static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev) +{ + ocrdma_add_default_sgid(dev); + ocrdma_add_vlan_sgids(dev); return 0; } -#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) || \ +defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) static int ocrdma_inet6addr_event(struct notifier_block *notifier, unsigned long event, void *ptr) @@ -208,6 +214,7 @@ static int ocrdma_inet6addr_event(struct notifier_block *notifier, struct ib_event gid_event; struct ocrdma_dev *dev; bool found = false; + bool updated = false; bool is_vlan = false; u16 vid = 0; @@ -233,23 +240,21 @@ static int ocrdma_inet6addr_event(struct notifier_block *notifier, mutex_lock(&dev->dev_lock); switch (event) { case NETDEV_UP: - ocrdma_add_sgid(dev, netdev->dev_addr, is_vlan, vid); + updated = ocrdma_add_sgid(dev, netdev->dev_addr, is_vlan, vid); break; case NETDEV_DOWN: - found = ocrdma_del_sgid(dev, netdev->dev_addr, is_vlan, vid); - if (found) { - /* found the matching entry, notify - * the consumers about it - */ - gid_event.device = &dev->ibdev; - gid_event.element.port_num = 1; - gid_event.event = IB_EVENT_GID_CHANGE; - ib_dispatch_event(&gid_event); - } + updated = ocrdma_del_sgid(dev, netdev->dev_addr, is_vlan, vid); break; default: break; } + if (updated) { + /* GID table updated, notify the consumers about it */ + gid_event.device = &dev->ibdev; + gid_event.element.port_num = 1; + gid_event.event = IB_EVENT_GID_CHANGE; + ib_dispatch_event(&gid_event); + } mutex_unlock(&dev->dev_lock); return NOTIFY_OK; } @@ -258,7 +263,7 @@ static struct notifier_block ocrdma_inet6addr_notifier = { .notifier_call = ocrdma_inet6addr_event }; -#endif /* IPV6 */ +#endif /* IPV6 and VLAN */ static enum rdma_link_layer ocrdma_link_layer(struct ib_device *device, u8 port_num) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h index 7fd80cc0f037..c75cbdfa87e7 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h +++ b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h @@ -418,6 +418,9 @@ enum { OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT = 0, OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK = 0xFFFF, + OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT = 16, + OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_MASK = 0xFFFF << + OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT, OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT = 0, OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK = 0xFFFF, @@ -458,7 +461,7 @@ enum { OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET, OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_OFFSET = 0, OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_MASK = 0xFFFF << - OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET, + OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_OFFSET, OCRDMA_MBX_QUERY_CFG_MAX_CQ_OFFSET = 16, OCRDMA_MBX_QUERY_CFG_MAX_CQ_MASK = 0xFFFF << diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c index d16d172b6b6b..2e2e7aecc990 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c @@ -53,7 +53,7 @@ int ocrdma_query_gid(struct ib_device *ibdev, u8 port, dev = get_ocrdma_dev(ibdev); memset(sgid, 0, sizeof(*sgid)); - if (index > OCRDMA_MAX_SGID) + if (index >= OCRDMA_MAX_SGID) return -EINVAL; memcpy(sgid, &dev->sgid_tbl[index], sizeof(*sgid)); @@ -83,8 +83,8 @@ int ocrdma_query_device(struct ib_device *ibdev, struct ib_device_attr *attr) IB_DEVICE_SHUTDOWN_PORT | IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_LOCAL_DMA_LKEY; - attr->max_sge = dev->attr.max_send_sge; - attr->max_sge_rd = dev->attr.max_send_sge; + attr->max_sge = min(dev->attr.max_send_sge, dev->attr.max_srq_sge); + attr->max_sge_rd = 0; attr->max_cq = dev->attr.max_cq; attr->max_cqe = dev->attr.max_cqe; attr->max_mr = dev->attr.max_mr; @@ -97,7 +97,7 @@ int ocrdma_query_device(struct ib_device *ibdev, struct ib_device_attr *attr) min(dev->attr.max_ord_per_qp, dev->attr.max_ird_per_qp); attr->max_qp_init_rd_atom = dev->attr.max_ord_per_qp; attr->max_srq = (dev->attr.max_qp - 1); - attr->max_srq_sge = attr->max_sge; + attr->max_srq_sge = attr->max_srq_sge; attr->max_srq_wr = dev->attr.max_rqe; attr->local_ca_ack_delay = dev->attr.local_ca_ack_delay; attr->max_fast_reg_page_list_len = 0; @@ -2301,8 +2301,10 @@ static bool ocrdma_poll_err_rcqe(struct ocrdma_qp *qp, struct ocrdma_cqe *cqe, *stop = true; expand = false; } - } else + } else { + *polled = true; expand = ocrdma_update_err_rcqe(ibwc, cqe, qp, status); + } return expand; } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 5c1bc995e560..f10221f40803 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -123,7 +123,7 @@ static void ipoib_ud_skb_put_frags(struct ipoib_dev_priv *priv, skb_frag_size_set(frag, size); skb->data_len += size; - skb->truesize += size; + skb->truesize += PAGE_SIZE; } else skb_put(skb, length); @@ -156,14 +156,18 @@ static struct sk_buff *ipoib_alloc_rx_skb(struct net_device *dev, int id) struct ipoib_dev_priv *priv = netdev_priv(dev); struct sk_buff *skb; int buf_size; + int tailroom; u64 *mapping; - if (ipoib_ud_need_sg(priv->max_ib_mtu)) + if (ipoib_ud_need_sg(priv->max_ib_mtu)) { buf_size = IPOIB_UD_HEAD_SIZE; - else + tailroom = 128; /* reserve some tailroom for IP/TCP headers */ + } else { buf_size = IPOIB_UD_BUF_SIZE(priv->max_ib_mtu); + tailroom = 0; + } - skb = dev_alloc_skb(buf_size + 4); + skb = dev_alloc_skb(buf_size + tailroom + 4); if (unlikely(!skb)) return NULL; diff --git a/drivers/input/joystick/as5011.c b/drivers/input/joystick/as5011.c index 57d19d4e0a2d..c96653b58867 100644 --- a/drivers/input/joystick/as5011.c +++ b/drivers/input/joystick/as5011.c @@ -282,7 +282,8 @@ static int __devinit as5011_probe(struct i2c_client *client, error = request_threaded_irq(as5011->button_irq, NULL, as5011_button_interrupt, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "as5011_button", as5011); if (error < 0) { dev_err(&client->dev, @@ -296,7 +297,7 @@ static int __devinit as5011_probe(struct i2c_client *client, error = request_threaded_irq(as5011->axis_irq, NULL, as5011_axis_interrupt, - plat_data->axis_irqflags, + plat_data->axis_irqflags | IRQF_ONESHOT, "as5011_joystick", as5011); if (error) { dev_err(&client->dev, diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index ee16fb67b7ae..83811e45d633 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -142,6 +142,7 @@ static const struct xpad_device { { 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX }, { 0x0c12, 0x8810, "Zeroplus Xbox Controller", 0, XTYPE_XBOX }, { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX }, + { 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX }, { 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX }, { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX }, @@ -164,6 +165,7 @@ static const struct xpad_device { { 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1689, 0xfd00, "Razer Onza Tournament Edition", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX }, { 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN } }; @@ -238,12 +240,14 @@ static struct usb_device_id xpad_table [] = { XPAD_XBOX360_VENDOR(0x045e), /* Microsoft X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */ XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */ + { USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */ XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */ XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */ XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */ - XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */ + XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */ + XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */ { } }; diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c index 64a0ca4c92f3..0d77f6c84950 100644 --- a/drivers/input/keyboard/mcs_touchkey.c +++ b/drivers/input/keyboard/mcs_touchkey.c @@ -178,7 +178,8 @@ static int __devinit mcs_touchkey_probe(struct i2c_client *client, } error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt, - IRQF_TRIGGER_FALLING, client->dev.driver->name, data); + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + client->dev.driver->name, data); if (error) { dev_err(&client->dev, "Failed to register interrupt\n"); goto err_free_mem; diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c index caa218a51b5a..7613f1cac951 100644 --- a/drivers/input/keyboard/mpr121_touchkey.c +++ b/drivers/input/keyboard/mpr121_touchkey.c @@ -248,7 +248,7 @@ static int __devinit mpr_touchkey_probe(struct i2c_client *client, error = request_threaded_irq(client->irq, NULL, mpr_touchkey_interrupt, - IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, client->dev.driver->name, mpr121); if (error) { dev_err(&client->dev, "Failed to register interrupt\n"); diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c index 0b7b2f891752..ca68f2992d72 100644 --- a/drivers/input/keyboard/qt1070.c +++ b/drivers/input/keyboard/qt1070.c @@ -201,7 +201,8 @@ static int __devinit qt1070_probe(struct i2c_client *client, msleep(QT1070_RESET_TIME); err = request_threaded_irq(client->irq, NULL, qt1070_interrupt, - IRQF_TRIGGER_NONE, client->dev.driver->name, data); + IRQF_TRIGGER_NONE | IRQF_ONESHOT, + client->dev.driver->name, data); if (err) { dev_err(&client->dev, "fail to request irq\n"); goto err_free_mem; diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c index 3afea3f89718..c355cdde8d22 100644 --- a/drivers/input/keyboard/tca6416-keypad.c +++ b/drivers/input/keyboard/tca6416-keypad.c @@ -278,7 +278,8 @@ static int __devinit tca6416_keypad_probe(struct i2c_client *client, error = request_threaded_irq(chip->irqnum, NULL, tca6416_keys_isr, - IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, "tca6416-keypad", chip); if (error) { dev_dbg(&client->dev, diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c index 5f87b28b3192..893869b29ed9 100644 --- a/drivers/input/keyboard/tca8418_keypad.c +++ b/drivers/input/keyboard/tca8418_keypad.c @@ -360,7 +360,7 @@ static int __devinit tca8418_keypad_probe(struct i2c_client *client, client->irq = gpio_to_irq(client->irq); error = request_threaded_irq(client->irq, NULL, tca8418_irq_handler, - IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, client->name, keypad_data); if (error) { dev_dbg(&client->dev, diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c index a4a445fb7020..4c34f21fbe2d 100644 --- a/drivers/input/keyboard/tnetv107x-keypad.c +++ b/drivers/input/keyboard/tnetv107x-keypad.c @@ -227,15 +227,15 @@ static int __devinit keypad_probe(struct platform_device *pdev) goto error_clk; } - error = request_threaded_irq(kp->irq_press, NULL, keypad_irq, 0, - dev_name(dev), kp); + error = request_threaded_irq(kp->irq_press, NULL, keypad_irq, + IRQF_ONESHOT, dev_name(dev), kp); if (error < 0) { dev_err(kp->dev, "Could not allocate keypad press key irq\n"); goto error_irq_press; } - error = request_threaded_irq(kp->irq_release, NULL, keypad_irq, 0, - dev_name(dev), kp); + error = request_threaded_irq(kp->irq_release, NULL, keypad_irq, + IRQF_ONESHOT, dev_name(dev), kp); if (error < 0) { dev_err(kp->dev, "Could not allocate keypad release key irq\n"); goto error_irq_release; diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c index 0ac75bbad4d6..2e5d5e1de647 100644 --- a/drivers/input/misc/ad714x.c +++ b/drivers/input/misc/ad714x.c @@ -972,6 +972,7 @@ struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq, struct ad714x_platform_data *plat_data = dev->platform_data; struct ad714x_chip *ad714x; void *drv_mem; + unsigned long irqflags; struct ad714x_button_drv *bt_drv; struct ad714x_slider_drv *sd_drv; @@ -1162,10 +1163,11 @@ struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq, alloc_idx++; } + irqflags = plat_data->irqflags ?: IRQF_TRIGGER_FALLING; + irqflags |= IRQF_ONESHOT; + error = request_threaded_irq(ad714x->irq, NULL, ad714x_interrupt_thread, - plat_data->irqflags ? - plat_data->irqflags : IRQF_TRIGGER_FALLING, - "ad714x_captouch", ad714x); + irqflags, "ad714x_captouch", ad714x); if (error) { dev_err(dev, "can't allocate irq %d\n", ad714x->irq); goto err_unreg_dev; diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c index 35083c6836c3..c1313d8535c3 100644 --- a/drivers/input/misc/dm355evm_keys.c +++ b/drivers/input/misc/dm355evm_keys.c @@ -213,7 +213,8 @@ static int __devinit dm355evm_keys_probe(struct platform_device *pdev) /* REVISIT: flush the event queue? */ status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq, - IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys); + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev_name(&pdev->dev), keys); if (status < 0) goto fail2; diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 2cf681d98c0d..d528c23e194f 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -79,6 +79,10 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252 #define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253 #define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254 +/* MacbookPro10,1 (unibody, June 2012) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262 +#define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263 +#define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264 #define BCM5974_DEVICE(prod) { \ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ @@ -128,6 +132,10 @@ static const struct usb_device_id bcm5974_table[] = { BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS), + /* MacbookPro10,1 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_JIS), /* Terminating entry */ {} }; @@ -354,6 +362,18 @@ static const struct bcm5974_config bcm5974_config_table[] = { { DIM_X, DIM_X / SN_COORD, -4620, 5140 }, { DIM_Y, DIM_Y / SN_COORD, -150, 6600 } }, + { + USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING7_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING7_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, + { DIM_X, DIM_X / SN_COORD, -4750, 5280 }, + { DIM_Y, DIM_Y / SN_COORD, -150, 6730 } + }, {} }; diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index cad5602d3ce4..8b31473a81fe 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -216,7 +216,7 @@ static void wacom_retrieve_report_data(struct usb_interface *intf, rep_data[0] = 12; result = wacom_get_report(intf, WAC_HID_FEATURE_REPORT, - rep_data[0], &rep_data, 2, + rep_data[0], rep_data, 2, WAC_MSG_RETRIES); if (result >= 0 && rep_data[1] > 2) @@ -401,7 +401,9 @@ static int wacom_parse_hid(struct usb_interface *intf, break; case HID_USAGE_CONTACTMAX: - wacom_retrieve_report_data(intf, features); + /* leave touch_max as is if predefined */ + if (!features->touch_max) + wacom_retrieve_report_data(intf, features); i++; break; } diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index e2482b40da51..bd4eb4277697 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -597,7 +597,7 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, AD7879_TMR(ts->pen_down_acc_interval); err = request_threaded_irq(ts->irq, NULL, ad7879_irq, - IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, dev_name(dev), ts); if (err) { dev_err(dev, "irq %d busy?\n", ts->irq); diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 42e645062c20..25fd0561a17d 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -1149,7 +1149,8 @@ static int __devinit mxt_probe(struct i2c_client *client, goto err_free_object; error = request_threaded_irq(client->irq, NULL, mxt_interrupt, - pdata->irqflags, client->dev.driver->name, data); + pdata->irqflags | IRQF_ONESHOT, + client->dev.driver->name, data); if (error) { dev_err(&client->dev, "Failed to register interrupt\n"); goto err_free_object; diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c index f2d03c06c2da..5c487d23f11c 100644 --- a/drivers/input/touchscreen/bu21013_ts.c +++ b/drivers/input/touchscreen/bu21013_ts.c @@ -509,7 +509,8 @@ static int __devinit bu21013_probe(struct i2c_client *client, input_set_drvdata(in_dev, bu21013_data); error = request_threaded_irq(pdata->irq, NULL, bu21013_gpio_irq, - IRQF_TRIGGER_FALLING | IRQF_SHARED, + IRQF_TRIGGER_FALLING | IRQF_SHARED | + IRQF_ONESHOT, DRIVER_TP, bu21013_data); if (error) { dev_err(&client->dev, "request irq %d failed\n", pdata->irq); diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c index 237753ad1031..464f1bf4b61d 100644 --- a/drivers/input/touchscreen/cy8ctmg110_ts.c +++ b/drivers/input/touchscreen/cy8ctmg110_ts.c @@ -251,7 +251,8 @@ static int __devinit cy8ctmg110_probe(struct i2c_client *client, } err = request_threaded_irq(client->irq, NULL, cy8ctmg110_irq_thread, - IRQF_TRIGGER_RISING, "touch_reset_key", ts); + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "touch_reset_key", ts); if (err < 0) { dev_err(&client->dev, "irq %d busy? error %d\n", client->irq, err); diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c index 3cd7a837f82b..cf299377fc49 100644 --- a/drivers/input/touchscreen/intel-mid-touch.c +++ b/drivers/input/touchscreen/intel-mid-touch.c @@ -620,7 +620,7 @@ static int __devinit mrstouch_probe(struct platform_device *pdev) MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0); err = request_threaded_irq(tsdev->irq, NULL, mrstouch_pendet_irq, - 0, "mrstouch", tsdev); + IRQF_ONESHOT, "mrstouch", tsdev); if (err) { dev_err(tsdev->dev, "unable to allocate irq\n"); goto err_free_mem; diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index 72f6ba3a4709..953b4c105cad 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -165,7 +165,7 @@ static int __devinit pixcir_i2c_ts_probe(struct i2c_client *client, input_set_drvdata(input, tsdata); error = request_threaded_irq(client->irq, NULL, pixcir_ts_isr, - IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, client->name, tsdata); if (error) { dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); diff --git a/drivers/input/touchscreen/tnetv107x-ts.c b/drivers/input/touchscreen/tnetv107x-ts.c index 7e7488097359..368d2c6cf780 100644 --- a/drivers/input/touchscreen/tnetv107x-ts.c +++ b/drivers/input/touchscreen/tnetv107x-ts.c @@ -297,7 +297,7 @@ static int __devinit tsc_probe(struct platform_device *pdev) goto error_clk; } - error = request_threaded_irq(ts->tsc_irq, NULL, tsc_irq, 0, + error = request_threaded_irq(ts->tsc_irq, NULL, tsc_irq, IRQF_ONESHOT, dev_name(dev), ts); if (error < 0) { dev_err(ts->dev, "Could not allocate ts irq\n"); diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c index b6adeaee9cc5..5ce3fa8ce646 100644 --- a/drivers/input/touchscreen/tsc2005.c +++ b/drivers/input/touchscreen/tsc2005.c @@ -650,7 +650,8 @@ static int __devinit tsc2005_probe(struct spi_device *spi) tsc2005_stop_scan(ts); error = request_threaded_irq(spi->irq, NULL, tsc2005_irq_thread, - IRQF_TRIGGER_RISING, "tsc2005", ts); + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "tsc2005", ts); if (error) { dev_err(&spi->dev, "Failed to request irq, err: %d\n", error); goto err_free_mem; diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index a2e418cba0ff..625626391f2d 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -83,6 +83,8 @@ static struct iommu_ops amd_iommu_ops; static ATOMIC_NOTIFIER_HEAD(ppr_notifier); int amd_iommu_max_glx_val = -1; +static struct dma_map_ops amd_iommu_dma_ops; + /* * general struct to manage commands send to an IOMMU */ @@ -402,7 +404,7 @@ static void amd_iommu_stats_init(void) return; de_fflush = debugfs_create_bool("fullflush", 0444, stats_dir, - (u32 *)&amd_iommu_unmap_flush); + &amd_iommu_unmap_flush); amd_iommu_stats_add(&compl_wait); amd_iommu_stats_add(&cnt_map_single); @@ -2267,6 +2269,13 @@ static int device_change_notifier(struct notifier_block *nb, list_add_tail(&dma_domain->list, &iommu_pd_list); spin_unlock_irqrestore(&iommu_pd_list_lock, flags); + dev_data = get_dev_data(dev); + + if (!dev_data->passthrough) + dev->archdata.dma_ops = &amd_iommu_dma_ops; + else + dev->archdata.dma_ops = &nommu_dma_ops; + break; case BUS_NOTIFY_DEL_DEVICE: diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index 542024ba6dba..a33612f3206f 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -129,7 +129,7 @@ u16 amd_iommu_last_bdf; /* largest PCI device id we have to handle */ LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings we find in ACPI */ -bool amd_iommu_unmap_flush; /* if true, flush on every unmap */ +u32 amd_iommu_unmap_flush; /* if true, flush on every unmap */ LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the system */ @@ -1641,6 +1641,8 @@ static int __init amd_iommu_init(void) amd_iommu_init_api(); + x86_platform.iommu_shutdown = disable_iommus; + if (iommu_pass_through) goto out; @@ -1649,8 +1651,6 @@ static int __init amd_iommu_init(void) else printk(KERN_INFO "AMD-Vi: Lazy IO/TLB flushing enabled\n"); - x86_platform.iommu_shutdown = disable_iommus; - out: return ret; diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h index 24355559a2ad..c1b1d489817e 100644 --- a/drivers/iommu/amd_iommu_types.h +++ b/drivers/iommu/amd_iommu_types.h @@ -652,7 +652,7 @@ extern unsigned long *amd_iommu_pd_alloc_bitmap; * If true, the addresses will be flushed on unmap time, not when * they are reused */ -extern bool amd_iommu_unmap_flush; +extern u32 amd_iommu_unmap_flush; /* Smallest number of PASIDs supported by any IOMMU in the system */ extern u32 amd_iommu_max_pasids; diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c index ecd679043d77..3f3d09d560ea 100644 --- a/drivers/iommu/tegra-smmu.c +++ b/drivers/iommu/tegra-smmu.c @@ -550,13 +550,13 @@ static int alloc_pdir(struct smmu_as *as) return 0; as->pte_count = devm_kzalloc(smmu->dev, - sizeof(as->pte_count[0]) * SMMU_PDIR_COUNT, GFP_KERNEL); + sizeof(as->pte_count[0]) * SMMU_PDIR_COUNT, GFP_ATOMIC); if (!as->pte_count) { dev_err(smmu->dev, "failed to allocate smmu_device PTE cunters\n"); return -ENOMEM; } - as->pdir_page = alloc_page(GFP_KERNEL | __GFP_DMA); + as->pdir_page = alloc_page(GFP_ATOMIC | __GFP_DMA); if (!as->pdir_page) { dev_err(smmu->dev, "failed to allocate smmu_device page directory\n"); diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c index 1a0ae4445ff2..5f21f629b7ae 100644 --- a/drivers/isdn/mISDN/stack.c +++ b/drivers/isdn/mISDN/stack.c @@ -135,8 +135,8 @@ send_layer2(struct mISDNstack *st, struct sk_buff *skb) skb = NULL; else if (*debug & DEBUG_SEND_ERR) printk(KERN_DEBUG - "%s ch%d mgr prim(%x) addr(%x) err %d\n", - __func__, ch->nr, hh->prim, ch->addr, ret); + "%s mgr prim(%x) err %d\n", + __func__, hh->prim, ret); } out: mutex_unlock(&st->lmutex); diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 04cb8c88d74b..12b2b55c519e 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -379,7 +379,7 @@ config LEDS_NETXBIG config LEDS_ASIC3 bool "LED support for the HTC ASIC3" - depends on LEDS_CLASS + depends on LEDS_CLASS=y depends on MFD_ASIC3 default y help @@ -390,7 +390,7 @@ config LEDS_ASIC3 config LEDS_RENESAS_TPU bool "LED support for Renesas TPU" - depends on LEDS_CLASS && HAVE_CLK && GENERIC_GPIO + depends on LEDS_CLASS=y && HAVE_CLK && GENERIC_GPIO help This option enables build of the LED TPU platform driver, suitable to drive any TPU channel on newer Renesas SoCs. diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index 8ee92c81aec2..e663e6f413e9 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -29,7 +29,7 @@ static void led_update_brightness(struct led_classdev *led_cdev) led_cdev->brightness = led_cdev->brightness_get(led_cdev); } -static ssize_t led_brightness_show(struct device *dev, +static ssize_t led_brightness_show(struct device *dev, struct device_attribute *attr, char *buf) { struct led_classdev *led_cdev = dev_get_drvdata(dev); diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c index d6860043f6f9..d65353d8d3fc 100644 --- a/drivers/leds/led-core.c +++ b/drivers/leds/led-core.c @@ -44,13 +44,6 @@ static void led_set_software_blink(struct led_classdev *led_cdev, if (!led_cdev->blink_brightness) led_cdev->blink_brightness = led_cdev->max_brightness; - if (led_get_trigger_data(led_cdev) && - delay_on == led_cdev->blink_delay_on && - delay_off == led_cdev->blink_delay_off) - return; - - led_stop_software_blink(led_cdev); - led_cdev->blink_delay_on = delay_on; led_cdev->blink_delay_off = delay_off; diff --git a/drivers/leds/ledtrig-heartbeat.c b/drivers/leds/ledtrig-heartbeat.c index 41dc76db4311..a019fbb70880 100644 --- a/drivers/leds/ledtrig-heartbeat.c +++ b/drivers/leds/ledtrig-heartbeat.c @@ -21,6 +21,8 @@ #include #include "leds.h" +static int panic_heartbeats; + struct heartbeat_trig_data { unsigned int phase; unsigned int period; @@ -34,6 +36,11 @@ static void led_heartbeat_function(unsigned long data) unsigned long brightness = LED_OFF; unsigned long delay = 0; + if (unlikely(panic_heartbeats)) { + led_set_brightness(led_cdev, LED_OFF); + return; + } + /* acts like an actual heart beat -- ie thump-thump-pause... */ switch (heartbeat_data->phase) { case 0: @@ -111,12 +118,19 @@ static int heartbeat_reboot_notifier(struct notifier_block *nb, return NOTIFY_DONE; } +static int heartbeat_panic_notifier(struct notifier_block *nb, + unsigned long code, void *unused) +{ + panic_heartbeats = 1; + return NOTIFY_DONE; +} + static struct notifier_block heartbeat_reboot_nb = { .notifier_call = heartbeat_reboot_notifier, }; static struct notifier_block heartbeat_panic_nb = { - .notifier_call = heartbeat_reboot_notifier, + .notifier_call = heartbeat_panic_notifier, }; static int __init heartbeat_trig_init(void) diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index d039de8322f0..b58b7a33914a 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1084,6 +1084,7 @@ static int mirror_ctr(struct dm_target *ti, unsigned int argc, char **argv) ti->split_io = dm_rh_get_region_size(ms->rh); ti->num_flush_requests = 1; ti->num_discard_requests = 1; + ti->discard_zeroes_data_unsupported = 1; ms->kmirrord_wq = alloc_workqueue("kmirrord", WQ_NON_REENTRANT | WQ_MEM_RECLAIM, 0); @@ -1214,7 +1215,7 @@ static int mirror_end_io(struct dm_target *ti, struct bio *bio, * We need to dec pending if this was a write. */ if (rw == WRITE) { - if (!(bio->bi_rw & REQ_FLUSH)) + if (!(bio->bi_rw & (REQ_FLUSH | REQ_DISCARD))) dm_rh_dec(ms->rh, map_context->ll); return error; } diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c index 7771ed212182..69732e03eb34 100644 --- a/drivers/md/dm-region-hash.c +++ b/drivers/md/dm-region-hash.c @@ -404,6 +404,9 @@ void dm_rh_mark_nosync(struct dm_region_hash *rh, struct bio *bio) return; } + if (bio->bi_rw & REQ_DISCARD) + return; + /* We must inform the log that the sync count has changed. */ log->type->set_region_sync(log, region, 0); @@ -524,7 +527,7 @@ void dm_rh_inc_pending(struct dm_region_hash *rh, struct bio_list *bios) struct bio *bio; for (bio = bios->head; bio; bio = bio->bi_next) { - if (bio->bi_rw & REQ_FLUSH) + if (bio->bi_rw & (REQ_FLUSH | REQ_DISCARD)) continue; rh_inc(rh, dm_rh_bio_to_region(rh, bio)); } diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 37fdaf81bd1f..68694da0d21d 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -1245,7 +1245,10 @@ static void process_discard(struct thin_c *tc, struct bio *bio) cell_release_singleton(cell, bio); cell_release_singleton(cell2, bio); - remap_and_issue(tc, bio, lookup_result.block); + if ((!lookup_result.shared) && pool->pf.discard_passdown) + remap_and_issue(tc, bio, lookup_result.block); + else + bio_endio(bio, 0); } break; @@ -2292,6 +2295,13 @@ static int process_reserve_metadata_snap_mesg(unsigned argc, char **argv, struct if (r) return r; + r = dm_pool_commit_metadata(pool->pmd); + if (r) { + DMERR("%s: dm_pool_commit_metadata() failed, error = %d", + __func__, r); + return r; + } + r = dm_pool_reserve_metadata_snap(pool->pmd); if (r) DMWARN("reserve_metadata_snap message failed."); @@ -2621,6 +2631,7 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv) if (tc->pool->pf.discard_enabled) { ti->discards_supported = 1; ti->num_discard_requests = 1; + ti->discard_zeroes_data_unsupported = 1; } dm_put(pool_md); diff --git a/drivers/md/md.c b/drivers/md/md.c index 1c2f9048e1ae..d5ab4493c8be 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2931,6 +2931,7 @@ offset_store(struct md_rdev *rdev, const char *buf, size_t len) * can be sane */ return -EBUSY; rdev->data_offset = offset; + rdev->new_data_offset = offset; return len; } @@ -3926,8 +3927,8 @@ array_state_show(struct mddev *mddev, char *page) return sprintf(page, "%s\n", array_states[st]); } -static int do_md_stop(struct mddev * mddev, int ro, int is_open); -static int md_set_readonly(struct mddev * mddev, int is_open); +static int do_md_stop(struct mddev * mddev, int ro, struct block_device *bdev); +static int md_set_readonly(struct mddev * mddev, struct block_device *bdev); static int do_md_run(struct mddev * mddev); static int restart_array(struct mddev *mddev); @@ -3943,14 +3944,14 @@ array_state_store(struct mddev *mddev, const char *buf, size_t len) /* stopping an active array */ if (atomic_read(&mddev->openers) > 0) return -EBUSY; - err = do_md_stop(mddev, 0, 0); + err = do_md_stop(mddev, 0, NULL); break; case inactive: /* stopping an active array */ if (mddev->pers) { if (atomic_read(&mddev->openers) > 0) return -EBUSY; - err = do_md_stop(mddev, 2, 0); + err = do_md_stop(mddev, 2, NULL); } else err = 0; /* already inactive */ break; @@ -3958,7 +3959,7 @@ array_state_store(struct mddev *mddev, const char *buf, size_t len) break; /* not supported yet */ case readonly: if (mddev->pers) - err = md_set_readonly(mddev, 0); + err = md_set_readonly(mddev, NULL); else { mddev->ro = 1; set_disk_ro(mddev->gendisk, 1); @@ -3968,7 +3969,7 @@ array_state_store(struct mddev *mddev, const char *buf, size_t len) case read_auto: if (mddev->pers) { if (mddev->ro == 0) - err = md_set_readonly(mddev, 0); + err = md_set_readonly(mddev, NULL); else if (mddev->ro == 1) err = restart_array(mddev); if (err == 0) { @@ -5351,15 +5352,17 @@ void md_stop(struct mddev *mddev) } EXPORT_SYMBOL_GPL(md_stop); -static int md_set_readonly(struct mddev *mddev, int is_open) +static int md_set_readonly(struct mddev *mddev, struct block_device *bdev) { int err = 0; mutex_lock(&mddev->open_mutex); - if (atomic_read(&mddev->openers) > is_open) { + if (atomic_read(&mddev->openers) > !!bdev) { printk("md: %s still in use.\n",mdname(mddev)); err = -EBUSY; goto out; } + if (bdev) + sync_blockdev(bdev); if (mddev->pers) { __md_stop_writes(mddev); @@ -5381,18 +5384,26 @@ out: * 0 - completely stop and dis-assemble array * 2 - stop but do not disassemble array */ -static int do_md_stop(struct mddev * mddev, int mode, int is_open) +static int do_md_stop(struct mddev * mddev, int mode, + struct block_device *bdev) { struct gendisk *disk = mddev->gendisk; struct md_rdev *rdev; mutex_lock(&mddev->open_mutex); - if (atomic_read(&mddev->openers) > is_open || + if (atomic_read(&mddev->openers) > !!bdev || mddev->sysfs_active) { printk("md: %s still in use.\n",mdname(mddev)); mutex_unlock(&mddev->open_mutex); return -EBUSY; } + if (bdev) + /* It is possible IO was issued on some other + * open file which was closed before we took ->open_mutex. + * As that was not the last close __blkdev_put will not + * have called sync_blockdev, so we must. + */ + sync_blockdev(bdev); if (mddev->pers) { if (mddev->ro) @@ -5466,7 +5477,7 @@ static void autorun_array(struct mddev *mddev) err = do_md_run(mddev); if (err) { printk(KERN_WARNING "md: do_md_run() returned %d\n", err); - do_md_stop(mddev, 0, 0); + do_md_stop(mddev, 0, NULL); } } @@ -5784,8 +5795,7 @@ static int add_new_disk(struct mddev * mddev, mdu_disk_info_t *info) super_types[mddev->major_version]. validate_super(mddev, rdev); if ((info->state & (1<flags) || - rdev->raid_disk != info->raid_disk)) { + rdev->raid_disk != info->raid_disk) { /* This was a hot-add request, but events doesn't * match, so reject it. */ @@ -6482,11 +6492,11 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode, goto done_unlock; case STOP_ARRAY: - err = do_md_stop(mddev, 0, 1); + err = do_md_stop(mddev, 0, bdev); goto done_unlock; case STOP_ARRAY_RO: - err = md_set_readonly(mddev, 1); + err = md_set_readonly(mddev, bdev); goto done_unlock; case BLKROSET: @@ -6751,7 +6761,7 @@ struct md_thread *md_register_thread(void (*run) (struct mddev *), struct mddev thread->tsk = kthread_run(md_thread, thread, "%s_%s", mdname(thread->mddev), - name ?: mddev->pers->name); + name); if (IS_ERR(thread->tsk)) { kfree(thread); return NULL; @@ -7298,6 +7308,7 @@ void md_do_sync(struct mddev *mddev) int skipped = 0; struct md_rdev *rdev; char *desc; + struct blk_plug plug; /* just incase thread restarts... */ if (test_bit(MD_RECOVERY_DONE, &mddev->recovery)) @@ -7447,6 +7458,7 @@ void md_do_sync(struct mddev *mddev) } mddev->curr_resync_completed = j; + blk_start_plug(&plug); while (j < max_sectors) { sector_t sectors; @@ -7552,6 +7564,7 @@ void md_do_sync(struct mddev *mddev) * this also signals 'finished resyncing' to md_stop */ out: + blk_finish_plug(&plug); wait_event(mddev->recovery_wait, !atomic_read(&mddev->recovery_active)); /* tell personality that we are finished */ diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index 9339e67fcc79..61a1833ebaf3 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -474,7 +474,8 @@ static int multipath_run (struct mddev *mddev) } { - mddev->thread = md_register_thread(multipathd, mddev, NULL); + mddev->thread = md_register_thread(multipathd, mddev, + "multipath"); if (!mddev->thread) { printk(KERN_ERR "multipath: couldn't allocate thread" " for %s\n", mdname(mddev)); diff --git a/drivers/md/persistent-data/dm-space-map-checker.c b/drivers/md/persistent-data/dm-space-map-checker.c index 50ed53bf4aa2..fc90c11620ad 100644 --- a/drivers/md/persistent-data/dm-space-map-checker.c +++ b/drivers/md/persistent-data/dm-space-map-checker.c @@ -8,6 +8,7 @@ #include #include +#include #ifdef CONFIG_DM_DEBUG_SPACE_MAPS @@ -89,13 +90,23 @@ static int ca_create(struct count_array *ca, struct dm_space_map *sm) ca->nr = nr_blocks; ca->nr_free = nr_blocks; - ca->counts = kzalloc(sizeof(*ca->counts) * nr_blocks, GFP_KERNEL); - if (!ca->counts) - return -ENOMEM; + + if (!nr_blocks) + ca->counts = NULL; + else { + ca->counts = vzalloc(sizeof(*ca->counts) * nr_blocks); + if (!ca->counts) + return -ENOMEM; + } return 0; } +static void ca_destroy(struct count_array *ca) +{ + vfree(ca->counts); +} + static int ca_load(struct count_array *ca, struct dm_space_map *sm) { int r; @@ -126,12 +137,14 @@ static int ca_load(struct count_array *ca, struct dm_space_map *sm) static int ca_extend(struct count_array *ca, dm_block_t extra_blocks) { dm_block_t nr_blocks = ca->nr + extra_blocks; - uint32_t *counts = kzalloc(sizeof(*counts) * nr_blocks, GFP_KERNEL); + uint32_t *counts = vzalloc(sizeof(*counts) * nr_blocks); if (!counts) return -ENOMEM; - memcpy(counts, ca->counts, sizeof(*counts) * ca->nr); - kfree(ca->counts); + if (ca->counts) { + memcpy(counts, ca->counts, sizeof(*counts) * ca->nr); + ca_destroy(ca); + } ca->nr = nr_blocks; ca->nr_free += extra_blocks; ca->counts = counts; @@ -151,11 +164,6 @@ static int ca_commit(struct count_array *old, struct count_array *new) return 0; } -static void ca_destroy(struct count_array *ca) -{ - kfree(ca->counts); -} - /*----------------------------------------------------------------*/ struct sm_checker { @@ -343,25 +351,25 @@ struct dm_space_map *dm_sm_checker_create(struct dm_space_map *sm) int r; struct sm_checker *smc; - if (!sm) - return NULL; + if (IS_ERR_OR_NULL(sm)) + return ERR_PTR(-EINVAL); smc = kmalloc(sizeof(*smc), GFP_KERNEL); if (!smc) - return NULL; + return ERR_PTR(-ENOMEM); memcpy(&smc->sm, &ops_, sizeof(smc->sm)); r = ca_create(&smc->old_counts, sm); if (r) { kfree(smc); - return NULL; + return ERR_PTR(r); } r = ca_create(&smc->counts, sm); if (r) { ca_destroy(&smc->old_counts); kfree(smc); - return NULL; + return ERR_PTR(r); } smc->real_sm = sm; @@ -371,7 +379,7 @@ struct dm_space_map *dm_sm_checker_create(struct dm_space_map *sm) ca_destroy(&smc->counts); ca_destroy(&smc->old_counts); kfree(smc); - return NULL; + return ERR_PTR(r); } r = ca_commit(&smc->old_counts, &smc->counts); @@ -379,7 +387,7 @@ struct dm_space_map *dm_sm_checker_create(struct dm_space_map *sm) ca_destroy(&smc->counts); ca_destroy(&smc->old_counts); kfree(smc); - return NULL; + return ERR_PTR(r); } return &smc->sm; @@ -391,25 +399,25 @@ struct dm_space_map *dm_sm_checker_create_fresh(struct dm_space_map *sm) int r; struct sm_checker *smc; - if (!sm) - return NULL; + if (IS_ERR_OR_NULL(sm)) + return ERR_PTR(-EINVAL); smc = kmalloc(sizeof(*smc), GFP_KERNEL); if (!smc) - return NULL; + return ERR_PTR(-ENOMEM); memcpy(&smc->sm, &ops_, sizeof(smc->sm)); r = ca_create(&smc->old_counts, sm); if (r) { kfree(smc); - return NULL; + return ERR_PTR(r); } r = ca_create(&smc->counts, sm); if (r) { ca_destroy(&smc->old_counts); kfree(smc); - return NULL; + return ERR_PTR(r); } smc->real_sm = sm; diff --git a/drivers/md/persistent-data/dm-space-map-disk.c b/drivers/md/persistent-data/dm-space-map-disk.c index fc469ba9f627..3d0ed5332883 100644 --- a/drivers/md/persistent-data/dm-space-map-disk.c +++ b/drivers/md/persistent-data/dm-space-map-disk.c @@ -290,7 +290,16 @@ struct dm_space_map *dm_sm_disk_create(struct dm_transaction_manager *tm, dm_block_t nr_blocks) { struct dm_space_map *sm = dm_sm_disk_create_real(tm, nr_blocks); - return dm_sm_checker_create_fresh(sm); + struct dm_space_map *smc; + + if (IS_ERR_OR_NULL(sm)) + return sm; + + smc = dm_sm_checker_create_fresh(sm); + if (IS_ERR(smc)) + dm_sm_destroy(sm); + + return smc; } EXPORT_SYMBOL_GPL(dm_sm_disk_create); diff --git a/drivers/md/persistent-data/dm-transaction-manager.c b/drivers/md/persistent-data/dm-transaction-manager.c index 400fe144c0cd..e5604b32d91f 100644 --- a/drivers/md/persistent-data/dm-transaction-manager.c +++ b/drivers/md/persistent-data/dm-transaction-manager.c @@ -138,6 +138,9 @@ EXPORT_SYMBOL_GPL(dm_tm_create_non_blocking_clone); void dm_tm_destroy(struct dm_transaction_manager *tm) { + if (!tm->is_clone) + wipe_shadow_table(tm); + kfree(tm); } EXPORT_SYMBOL_GPL(dm_tm_destroy); @@ -344,8 +347,10 @@ static int dm_tm_create_internal(struct dm_block_manager *bm, } *sm = dm_sm_checker_create(inner); - if (!*sm) + if (IS_ERR(*sm)) { + r = PTR_ERR(*sm); goto bad2; + } } else { r = dm_bm_write_lock(dm_tm_get_bm(*tm), sb_location, @@ -364,8 +369,10 @@ static int dm_tm_create_internal(struct dm_block_manager *bm, } *sm = dm_sm_checker_create(inner); - if (!*sm) + if (IS_ERR(*sm)) { + r = PTR_ERR(*sm); goto bad2; + } } return 0; diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index a9c7981ddd24..cacd008d6864 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -517,8 +517,8 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect int bad_sectors; int disk = start_disk + i; - if (disk >= conf->raid_disks) - disk -= conf->raid_disks; + if (disk >= conf->raid_disks * 2) + disk -= conf->raid_disks * 2; rdev = rcu_dereference(conf->mirrors[disk].rdev); if (r1_bio->bios[disk] == IO_BLOCKED @@ -883,7 +883,6 @@ static void make_request(struct mddev *mddev, struct bio * bio) const unsigned long do_sync = (bio->bi_rw & REQ_SYNC); const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA)); struct md_rdev *blocked_rdev; - int plugged; int first_clone; int sectors_handled; int max_sectors; @@ -1034,7 +1033,6 @@ read_again: * the bad blocks. Each set of writes gets it's own r1bio * with a set of bios attached. */ - plugged = mddev_check_plugged(mddev); disks = conf->raid_disks * 2; retry_write: @@ -1191,6 +1189,8 @@ read_again: bio_list_add(&conf->pending_bio_list, mbio); conf->pending_count++; spin_unlock_irqrestore(&conf->device_lock, flags); + if (!mddev_check_plugged(mddev)) + md_wakeup_thread(mddev->thread); } /* Mustn't call r1_bio_write_done before this next test, * as it could result in the bio being freed. @@ -1213,9 +1213,6 @@ read_again: /* In case raid1d snuck in to freeze_array */ wake_up(&conf->wait_barrier); - - if (do_sync || !bitmap || !plugged) - md_wakeup_thread(mddev->thread); } static void status(struct seq_file *seq, struct mddev *mddev) @@ -1821,8 +1818,14 @@ static void sync_request_write(struct mddev *mddev, struct r1bio *r1_bio) if (atomic_dec_and_test(&r1_bio->remaining)) { /* if we're here, all write(s) have completed, so clean up */ - md_done_sync(mddev, r1_bio->sectors, 1); - put_buf(r1_bio); + int s = r1_bio->sectors; + if (test_bit(R1BIO_MadeGood, &r1_bio->state) || + test_bit(R1BIO_WriteError, &r1_bio->state)) + reschedule_retry(r1_bio); + else { + put_buf(r1_bio); + md_done_sync(mddev, s, 1); + } } } @@ -2488,9 +2491,10 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr, int *skipp */ if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { atomic_set(&r1_bio->remaining, read_targets); - for (i = 0; i < conf->raid_disks * 2; i++) { + for (i = 0; i < conf->raid_disks * 2 && read_targets; i++) { bio = r1_bio->bios[i]; if (bio->bi_end_io == end_sync_read) { + read_targets--; md_sync_acct(bio->bi_bdev, nr_sectors); generic_make_request(bio); } @@ -2621,7 +2625,7 @@ static struct r1conf *setup_conf(struct mddev *mddev) goto abort; } err = -ENOMEM; - conf->thread = md_register_thread(raid1d, mddev, NULL); + conf->thread = md_register_thread(raid1d, mddev, "raid1"); if (!conf->thread) { printk(KERN_ERR "md/raid1:%s: couldn't allocate thread\n", diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 99ae6068e456..8da6282254c3 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1039,7 +1039,6 @@ static void make_request(struct mddev *mddev, struct bio * bio) const unsigned long do_fua = (bio->bi_rw & REQ_FUA); unsigned long flags; struct md_rdev *blocked_rdev; - int plugged; int sectors_handled; int max_sectors; int sectors; @@ -1239,7 +1238,6 @@ read_again: * of r10_bios is recored in bio->bi_phys_segments just as with * the read case. */ - plugged = mddev_check_plugged(mddev); r10_bio->read_slot = -1; /* make sure repl_bio gets freed */ raid10_find_phys(conf, r10_bio); @@ -1396,6 +1394,8 @@ retry_write: bio_list_add(&conf->pending_bio_list, mbio); conf->pending_count++; spin_unlock_irqrestore(&conf->device_lock, flags); + if (!mddev_check_plugged(mddev)) + md_wakeup_thread(mddev->thread); if (!r10_bio->devs[i].repl_bio) continue; @@ -1423,6 +1423,8 @@ retry_write: bio_list_add(&conf->pending_bio_list, mbio); conf->pending_count++; spin_unlock_irqrestore(&conf->device_lock, flags); + if (!mddev_check_plugged(mddev)) + md_wakeup_thread(mddev->thread); } /* Don't remove the bias on 'remaining' (one_write_done) until @@ -1448,9 +1450,6 @@ retry_write: /* In case raid10d snuck in to freeze_array */ wake_up(&conf->wait_barrier); - - if (do_sync || !mddev->bitmap || !plugged) - md_wakeup_thread(mddev->thread); } static void status(struct seq_file *seq, struct mddev *mddev) @@ -2310,7 +2309,7 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10 if (r10_sync_page_io(rdev, r10_bio->devs[sl].addr + sect, - s<<9, conf->tmppage, WRITE) + s, conf->tmppage, WRITE) == 0) { /* Well, this device is dead */ printk(KERN_NOTICE @@ -2349,7 +2348,7 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10 switch (r10_sync_page_io(rdev, r10_bio->devs[sl].addr + sect, - s<<9, conf->tmppage, + s, conf->tmppage, READ)) { case 0: /* Well, this device is dead */ @@ -2512,7 +2511,7 @@ read_more: slot = r10_bio->read_slot; printk_ratelimited( KERN_ERR - "md/raid10:%s: %s: redirecting" + "md/raid10:%s: %s: redirecting " "sector %llu to another mirror\n", mdname(mddev), bdevname(rdev->bdev, b), @@ -2661,7 +2660,8 @@ static void raid10d(struct mddev *mddev) blk_start_plug(&plug); for (;;) { - flush_pending_writes(conf); + if (atomic_read(&mddev->plug_cnt) == 0) + flush_pending_writes(conf); spin_lock_irqsave(&conf->device_lock, flags); if (list_empty(head)) { @@ -2890,6 +2890,12 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr, /* want to reconstruct this device */ rb2 = r10_bio; sect = raid10_find_virt(conf, sector_nr, i); + if (sect >= mddev->resync_max_sectors) { + /* last stripe is not complete - don't + * try to recover this sector. + */ + continue; + } /* Unless we are doing a full sync, or a replacement * we only need to recover the block if it is set in * the bitmap @@ -3421,7 +3427,7 @@ static struct r10conf *setup_conf(struct mddev *mddev) spin_lock_init(&conf->resync_lock); init_waitqueue_head(&conf->wait_barrier); - conf->thread = md_register_thread(raid10d, mddev, NULL); + conf->thread = md_register_thread(raid10d, mddev, "raid10"); if (!conf->thread) goto out; diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index d26767246d26..04348d76bb30 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -196,12 +196,14 @@ static void __release_stripe(struct r5conf *conf, struct stripe_head *sh) BUG_ON(!list_empty(&sh->lru)); BUG_ON(atomic_read(&conf->active_stripes)==0); if (test_bit(STRIPE_HANDLE, &sh->state)) { - if (test_bit(STRIPE_DELAYED, &sh->state)) + if (test_bit(STRIPE_DELAYED, &sh->state) && + !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) list_add_tail(&sh->lru, &conf->delayed_list); else if (test_bit(STRIPE_BIT_DELAY, &sh->state) && sh->bm_seq - conf->seq_write > 0) list_add_tail(&sh->lru, &conf->bitmap_list); else { + clear_bit(STRIPE_DELAYED, &sh->state); clear_bit(STRIPE_BIT_DELAY, &sh->state); list_add_tail(&sh->lru, &conf->handle_list); } @@ -606,6 +608,12 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) * a chance*/ md_check_recovery(conf->mddev); } + /* + * Because md_wait_for_blocked_rdev + * will dec nr_pending, we must + * increment it first. + */ + atomic_inc(&rdev->nr_pending); md_wait_for_blocked_rdev(rdev, conf->mddev); } else { /* Acknowledged bad block - skip the write */ @@ -1737,6 +1745,7 @@ static void raid5_end_read_request(struct bio * bi, int error) } else { const char *bdn = bdevname(rdev->bdev, b); int retry = 0; + int set_bad = 0; clear_bit(R5_UPTODATE, &sh->dev[i].flags); atomic_inc(&rdev->read_errors); @@ -1748,7 +1757,8 @@ static void raid5_end_read_request(struct bio * bi, int error) mdname(conf->mddev), (unsigned long long)s, bdn); - else if (conf->mddev->degraded >= conf->max_degraded) + else if (conf->mddev->degraded >= conf->max_degraded) { + set_bad = 1; printk_ratelimited( KERN_WARNING "md/raid:%s: read error not correctable " @@ -1756,8 +1766,9 @@ static void raid5_end_read_request(struct bio * bi, int error) mdname(conf->mddev), (unsigned long long)s, bdn); - else if (test_bit(R5_ReWrite, &sh->dev[i].flags)) + } else if (test_bit(R5_ReWrite, &sh->dev[i].flags)) { /* Oh, no!!! */ + set_bad = 1; printk_ratelimited( KERN_WARNING "md/raid:%s: read error NOT corrected!! " @@ -1765,7 +1776,7 @@ static void raid5_end_read_request(struct bio * bi, int error) mdname(conf->mddev), (unsigned long long)s, bdn); - else if (atomic_read(&rdev->read_errors) + } else if (atomic_read(&rdev->read_errors) > conf->max_nr_stripes) printk(KERN_WARNING "md/raid:%s: Too many read errors, failing device %s.\n", @@ -1777,7 +1788,11 @@ static void raid5_end_read_request(struct bio * bi, int error) else { clear_bit(R5_ReadError, &sh->dev[i].flags); clear_bit(R5_ReWrite, &sh->dev[i].flags); - md_error(conf->mddev, rdev); + if (!(set_bad + && test_bit(In_sync, &rdev->flags) + && rdev_set_badblocks( + rdev, sh->sector, STRIPE_SECTORS, 0))) + md_error(conf->mddev, rdev); } } rdev_dec_pending(rdev, conf->mddev); @@ -3582,8 +3597,18 @@ static void handle_stripe(struct stripe_head *sh) finish: /* wait for this device to become unblocked */ - if (conf->mddev->external && unlikely(s.blocked_rdev)) - md_wait_for_blocked_rdev(s.blocked_rdev, conf->mddev); + if (unlikely(s.blocked_rdev)) { + if (conf->mddev->external) + md_wait_for_blocked_rdev(s.blocked_rdev, + conf->mddev); + else + /* Internal metadata will immediately + * be written by raid5d, so we don't + * need to wait here. + */ + rdev_dec_pending(s.blocked_rdev, + conf->mddev); + } if (s.handle_bad_blocks) for (i = disks; i--; ) { @@ -3881,8 +3906,6 @@ static int chunk_aligned_read(struct mddev *mddev, struct bio * raid_bio) raid_bio->bi_next = (void*)rdev; align_bi->bi_bdev = rdev->bdev; align_bi->bi_flags &= ~(1 << BIO_SEG_VALID); - /* No reshape active, so we can trust rdev->data_offset */ - align_bi->bi_sector += rdev->data_offset; if (!bio_fits_rdev(align_bi) || is_badblock(rdev, align_bi->bi_sector, align_bi->bi_size>>9, @@ -3893,6 +3916,9 @@ static int chunk_aligned_read(struct mddev *mddev, struct bio * raid_bio) return 0; } + /* No reshape active, so we can trust rdev->data_offset */ + align_bi->bi_sector += rdev->data_offset; + spin_lock_irq(&conf->device_lock); wait_event_lock_irq(conf->wait_for_stripe, conf->quiesce == 0, @@ -3971,7 +3997,6 @@ static void make_request(struct mddev *mddev, struct bio * bi) struct stripe_head *sh; const int rw = bio_data_dir(bi); int remaining; - int plugged; if (unlikely(bi->bi_rw & REQ_FLUSH)) { md_flush_request(mddev, bi); @@ -3990,7 +4015,6 @@ static void make_request(struct mddev *mddev, struct bio * bi) bi->bi_next = NULL; bi->bi_phys_segments = 1; /* over-loaded to count active stripes */ - plugged = mddev_check_plugged(mddev); for (;logical_sector < last_sector; logical_sector += STRIPE_SECTORS) { DEFINE_WAIT(w); int previous; @@ -4092,6 +4116,7 @@ static void make_request(struct mddev *mddev, struct bio * bi) if ((bi->bi_rw & REQ_SYNC) && !test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) atomic_inc(&conf->preread_active_stripes); + mddev_check_plugged(mddev); release_stripe(sh); } else { /* cannot get stripe for read-ahead, just give-up */ @@ -4099,10 +4124,7 @@ static void make_request(struct mddev *mddev, struct bio * bi) finish_wait(&conf->wait_for_overlap, &w); break; } - } - if (!plugged) - md_wakeup_thread(mddev->thread); spin_lock_irq(&conf->device_lock); remaining = raid5_dec_bi_phys_segments(bi); @@ -4823,6 +4845,7 @@ static struct r5conf *setup_conf(struct mddev *mddev) int raid_disk, memory, max_disks; struct md_rdev *rdev; struct disk_info *disk; + char pers_name[6]; if (mddev->new_level != 5 && mddev->new_level != 4 @@ -4946,7 +4969,8 @@ static struct r5conf *setup_conf(struct mddev *mddev) printk(KERN_INFO "md/raid:%s: allocated %dkB\n", mdname(mddev), memory); - conf->thread = md_register_thread(raid5d, mddev, NULL); + sprintf(pers_name, "raid%d", mddev->new_level); + conf->thread = md_register_thread(raid5d, mddev, pers_name); if (!conf->thread) { printk(KERN_ERR "md/raid:%s: couldn't allocate thread.\n", @@ -5465,10 +5489,9 @@ static int raid5_add_disk(struct mddev *mddev, struct md_rdev *rdev) if (rdev->saved_raid_disk >= 0 && rdev->saved_raid_disk >= first && conf->disks[rdev->saved_raid_disk].rdev == NULL) - disk = rdev->saved_raid_disk; - else - disk = first; - for ( ; disk <= last ; disk++) { + first = rdev->saved_raid_disk; + + for (disk = first; disk <= last; disk++) { p = conf->disks + disk; if (p->rdev == NULL) { clear_bit(In_sync, &rdev->flags); @@ -5477,8 +5500,11 @@ static int raid5_add_disk(struct mddev *mddev, struct md_rdev *rdev) if (rdev->saved_raid_disk != disk) conf->fullsync = 1; rcu_assign_pointer(p->rdev, rdev); - break; + goto out; } + } + for (disk = first; disk <= last; disk++) { + p = conf->disks + disk; if (test_bit(WantReplacement, &p->rdev->flags) && p->replacement == NULL) { clear_bit(In_sync, &rdev->flags); @@ -5490,6 +5516,7 @@ static int raid5_add_disk(struct mddev *mddev, struct md_rdev *rdev) break; } } +out: print_raid5_conf(conf); return err; } diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c index 7d42c11c8684..0cdbd742974a 100644 --- a/drivers/media/common/saa7146_fops.c +++ b/drivers/media/common/saa7146_fops.c @@ -198,7 +198,6 @@ static int fops_open(struct file *file) struct saa7146_dev *dev = video_drvdata(file); struct saa7146_fh *fh = NULL; int result = 0; - enum v4l2_buf_type type; DEB_EE("file:%p, dev:%s\n", file, video_device_node_name(vdev)); @@ -207,10 +206,6 @@ static int fops_open(struct file *file) DEB_D("using: %p\n", dev); - type = vdev->vfl_type == VFL_TYPE_GRABBER - ? V4L2_BUF_TYPE_VIDEO_CAPTURE - : V4L2_BUF_TYPE_VBI_CAPTURE; - /* check if an extension is registered */ if( NULL == dev->ext ) { DEB_S("no extension registered for this device\n"); diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c index 00a67326c193..39eab73b01ae 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.c +++ b/drivers/media/dvb/dvb-core/dvbdev.c @@ -243,6 +243,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev, if (minor == MAX_DVB_MINORS) { kfree(dvbdevfops); kfree(dvbdev); + up_write(&minor_rwsem); mutex_unlock(&dvbdev_register_lock); return -EINVAL; } diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c index 98ecaf0900d6..3180f5b2a6a6 100644 --- a/drivers/media/dvb/frontends/cx24110.c +++ b/drivers/media/dvb/frontends/cx24110.c @@ -516,9 +516,9 @@ static int cx24110_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) if(cx24110_readreg(state,0x10)&0x40) { /* the RS error counter has finished one counting window */ cx24110_writereg(state,0x10,0x60); /* select the byer reg */ - cx24110_readreg(state, 0x12) | + (void)(cx24110_readreg(state, 0x12) | (cx24110_readreg(state, 0x13) << 8) | - (cx24110_readreg(state, 0x14) << 16); + (cx24110_readreg(state, 0x14) << 16)); cx24110_writereg(state,0x10,0x70); /* select the bler reg */ state->lastbler=cx24110_readreg(state,0x12)| (cx24110_readreg(state,0x13)<<8)| diff --git a/drivers/media/dvb/frontends/cxd2820r_c.c b/drivers/media/dvb/frontends/cxd2820r_c.c index 945404991529..ed3b0ba624de 100644 --- a/drivers/media/dvb/frontends/cxd2820r_c.c +++ b/drivers/media/dvb/frontends/cxd2820r_c.c @@ -121,7 +121,7 @@ int cxd2820r_get_frontend_c(struct dvb_frontend *fe) if (ret) goto error; - switch ((buf[0] >> 0) & 0x03) { + switch ((buf[0] >> 0) & 0x07) { case 0: c->modulation = QAM_16; break; diff --git a/drivers/media/dvb/frontends/lg2160.c b/drivers/media/dvb/frontends/lg2160.c index a3ab1a5b6597..cc11260e99df 100644 --- a/drivers/media/dvb/frontends/lg2160.c +++ b/drivers/media/dvb/frontends/lg2160.c @@ -126,7 +126,7 @@ static int lg216x_write_regs(struct lg216x_state *state, lg_reg("writing %d registers...\n", len); - for (i = 0; i < len - 1; i++) { + for (i = 0; i < len; i++) { ret = lg216x_write_reg(state, regs[i].reg, regs[i].val); if (lg_fail(ret)) return ret; diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c index 63c004a25e0b..664e460f247b 100644 --- a/drivers/media/dvb/siano/smsusb.c +++ b/drivers/media/dvb/siano/smsusb.c @@ -544,6 +544,8 @@ static const struct usb_device_id smsusb_id_table[] __devinitconst = { .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { USB_DEVICE(0x2040, 0xc0a0), .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, + { USB_DEVICE(0x2040, 0xf5a0), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { } /* Terminating entry */ }; diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index 740a3d5520c7..b415211d0c4b 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -157,7 +157,7 @@ static int __devinit maxiradio_probe(struct pci_dev *pdev, const struct pci_devi goto err_out_free_region; dev->io = pci_resource_start(pdev, 0); - if (snd_tea575x_init(&dev->tea)) { + if (snd_tea575x_init(&dev->tea, THIS_MODULE)) { printk(KERN_ERR "radio-maxiradio: Unable to detect TEA575x tuner\n"); goto err_out_free_region; } diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index 52b8011f1b23..4efcbec74c52 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -238,7 +238,7 @@ static int __devinit fmr2_probe(struct fmr2 *fmr2, struct device *pdev, int io) snprintf(fmr2->tea.bus_info, sizeof(fmr2->tea.bus_info), "%s:%s", fmr2->is_fmd2 ? "PnP" : "ISA", dev_name(pdev)); - if (snd_tea575x_init(&fmr2->tea)) { + if (snd_tea575x_init(&fmr2->tea, THIS_MODULE)) { printk(KERN_ERR "radio-sf16fmr2: Unable to detect TEA575x tuner\n"); release_region(fmr2->io, 2); return -ENODEV; diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c index e9f638761296..f412f7ab270b 100644 --- a/drivers/media/radio/si470x/radio-si470x-usb.c +++ b/drivers/media/radio/si470x/radio-si470x-usb.c @@ -51,6 +51,8 @@ static struct usb_device_id si470x_usb_driver_id_table[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x1b80, 0xd700, USB_CLASS_HID, 0, 0) }, /* Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear) */ { USB_DEVICE_AND_INTERFACE_INFO(0x10c5, 0x819a, USB_CLASS_HID, 0, 0) }, + /* Axentia ALERT FM USB Receiver */ + { USB_DEVICE_AND_INTERFACE_INFO(0x12cf, 0x7111, USB_CLASS_HID, 0, 0) }, /* Terminating entry */ { } }; diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c index 342c2c8c1ddf..54ee34872d14 100644 --- a/drivers/media/rc/winbond-cir.c +++ b/drivers/media/rc/winbond-cir.c @@ -232,7 +232,7 @@ MODULE_PARM_DESC(invert, "Invert the signal from the IR receiver"); static bool txandrx; /* default = 0 */ module_param(txandrx, bool, 0444); -MODULE_PARM_DESC(invert, "Allow simultaneous TX and RX"); +MODULE_PARM_DESC(txandrx, "Allow simultaneous TX and RX"); static unsigned int wake_sc = 0x800F040C; module_param(wake_sc, uint, 0644); @@ -1032,6 +1032,8 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id) data->dev->tx_ir = wbcir_tx; data->dev->priv = data; data->dev->dev.parent = &device->dev; + data->dev->timeout = MS_TO_NS(100); + data->dev->allowed_protos = RC_TYPE_ALL; if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) { dev_err(dev, "Region 0x%lx-0x%lx already in use!\n", diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index ff2933ab705f..856ab962cd63 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -371,7 +371,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 2, 0, 0, 0 }, .gpiomute = 10, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -384,7 +383,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 1, 2, 3 }, .gpiomute = 4, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -398,7 +396,6 @@ struct tvcard bttv_tvcards[] = { .gpiomux = { 4, 0, 2, 3 }, .gpiomute = 1, .no_msp34xx = 1, - .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_NTSC, .tuner_addr = ADDR_UNSET, .pll = PLL_28, @@ -414,7 +411,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0 }, - .needs_tvaudio = 0, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, }, @@ -427,7 +423,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 0), .gpiomux = { 0, 1, 0, 1 }, .gpiomute = 3, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -440,7 +435,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x0f, .gpiomux = { 0x0c, 0x04, 0x08, 0x04 }, /* 0x04 for some cards ?? */ - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .audio_mode_gpio= avermedia_tvphone_audio, @@ -454,7 +448,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 0, 0), .gpiomux = { 0 }, - .needs_tvaudio = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, }, @@ -469,7 +462,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 0xc00, 0x800, 0x400 }, .gpiomute = 0xc00, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -482,7 +474,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 3, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 1, 1, 2, 3 }, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TEMIC_PAL, .tuner_addr = ADDR_UNSET, @@ -496,7 +487,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 0, 1, 1), .gpiomux = { 0, 1, 2, 3 }, .gpiomute = 4, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -510,7 +500,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x20001,0x10001, 0, 0 }, .gpiomute = 10, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -524,7 +513,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 15, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 13, 14, 11, 7 }, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -536,7 +524,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 15, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 13, 14, 11, 7 }, - .needs_tvaudio = 1, .msp34xx_alt = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -553,7 +540,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */ .gpiomute = 4, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -567,7 +553,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 0, 1, 0 }, .gpiomute = 10, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -583,7 +568,6 @@ struct tvcard bttv_tvcards[] = { /* 2003-10-20 by "Anton A. Arapov" */ .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, .gpiomute = 0x002000, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -597,7 +581,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1, 0), .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 }, .gpiomute = 0xcfa007, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .volume_gpio = winview_volume, @@ -611,7 +594,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 1, 0, 0, 0 }, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -660,7 +642,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 1, 0x800, 0x400 }, .gpiomute = 0xc00, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -691,7 +672,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = {0x400, 0x400, 0x400, 0x400 }, .gpiomute = 0xc00, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -706,7 +686,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, .gpiomute = 0x40000, - .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .audio_mode_gpio= terratv_audio, @@ -720,7 +699,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 0, 1, 1), .gpiomux = { 0, 1, 2, 3 }, .gpiomute = 4, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -748,7 +726,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 }, .gpiomute = 0x40000, - .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .audio_mode_gpio= terratv_audio, @@ -793,7 +770,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 0, 0), .gpiomux = { 0 }, - .needs_tvaudio = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .muxsel_hook = PXC200_muxsel, @@ -834,7 +810,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0 }, - .needs_tvaudio = 0, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, }, @@ -847,7 +822,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x500, 0, 0x300, 0x900 }, .gpiomute = 0x900, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -874,7 +848,6 @@ struct tvcard bttv_tvcards[] = { Note: There exists another variant "Winfast 2000" with tv stereo !? Note: eeprom only contains FF and pci subsystem id 107d:6606 */ - .needs_tvaudio = 0, .pll = PLL_28, .has_radio = 1, .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */ @@ -934,7 +907,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 0), .gpiomux = { 0x551400, 0x551200, 0, 0 }, .gpiomute = 0x551c00, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, .tuner_addr = ADDR_UNSET, @@ -949,7 +921,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 2, 0xd0001, 0, 0 }, .gpiomute = 1, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -966,7 +937,6 @@ struct tvcard bttv_tvcards[] = { .gpiomux = { 4, 0, 2, 3 }, .gpiomute = 1, .no_msp34xx = 1, - .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_NTSC, .tuner_addr = ADDR_UNSET, .pll = PLL_28, @@ -980,7 +950,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 15, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 13, 4, 11, 7 }, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -995,7 +964,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 0, 0, 0}, - .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, @@ -1066,7 +1034,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, .gpiomute = 0x40000, - .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_35, .tuner_type = TUNER_PHILIPS_PAL_I, @@ -1084,7 +1051,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = {2,0,0,0 }, .gpiomute = 1, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -1163,7 +1129,6 @@ struct tvcard bttv_tvcards[] = { MUX2 (mask 0x30000): 0,2,3= from MSP34xx 1= FM stereo Radio from Tuner */ - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -1179,7 +1144,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 0, 0x10, 8 }, .gpiomute = 4, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -1218,7 +1182,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 0), .gpiomux = { 2, 0, 0, 0 }, .gpiomute = 10, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TEMIC_PAL, .tuner_addr = ADDR_UNSET, @@ -1250,7 +1213,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(3, 1), .gpiomux = { 0 }, - .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_35, .tuner_type = TUNER_ABSENT, @@ -1266,7 +1228,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x400, 0x400, 0x400, 0x400 }, .gpiomute = 0x800, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_TEMIC_4036FY5_NTSC, .tuner_addr = ADDR_UNSET, @@ -1312,7 +1273,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 2), .gpiomux = { }, .no_msp34xx = 1, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -1329,7 +1289,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 0), .gpiomux = { 1, 0, 4, 4 }, .gpiomute = 9, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -1379,7 +1338,6 @@ struct tvcard bttv_tvcards[] = { .gpiomute = 0x1800, .audio_mode_gpio= fv2000s_audio, .no_msp34xx = 1, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -1393,7 +1351,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x500, 0x500, 0x300, 0x900 }, .gpiomute = 0x900, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -1477,7 +1434,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */ .gpiomute = 13, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_LG_PAL_I_FM, .tuner_addr = ADDR_UNSET, @@ -1514,7 +1470,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x01, 0x00, 0x03, 0x03 }, .gpiomute = 0x09, - .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -1540,7 +1495,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 0, 0), .gpiomux = { 0 }, - .needs_tvaudio = 0, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, }, @@ -1567,7 +1521,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 1, 1), .gpiomux = { 0, 1, 2, 2 }, .gpiomute = 4, - .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .pll = PLL_28, @@ -1597,7 +1550,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 0), .gpiomux = { 0 }, - .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, @@ -1619,7 +1571,6 @@ struct tvcard bttv_tvcards[] = { * btwincap uses 0x80000/0x80003 */ .gpiomute = 4, - .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -1655,7 +1606,6 @@ struct tvcard bttv_tvcards[] = { /* .audio_inputs= 1, */ .svhs = 2, .muxsel = MUXSEL(2, 0, 1, 1), - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -1875,7 +1825,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 1, 2, 3}, .gpiomute = 4, - .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .pll = PLL_28, @@ -1902,7 +1851,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3), .gpiomux = { 0 }, - .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, @@ -1920,7 +1868,6 @@ struct tvcard bttv_tvcards[] = { /* Tuner, Radio, external, internal, off, on */ .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 }, .gpiomute = 0x0f, - .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_NTSC, @@ -1936,7 +1883,6 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x00, .muxsel = MUXSEL(2, 3, 1, 1), - .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -2034,7 +1980,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 0), .gpiomux = { 0 }, - .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, @@ -2049,7 +1994,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x00, .muxsel = MUXSEL(2, 3, 1, 0), .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2062,7 +2006,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x00, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2079,7 +2022,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0), .muxsel_hook = phytec_muxsel, .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2094,7 +2036,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), .muxsel_hook = phytec_muxsel, .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2118,7 +2059,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .svhs = NO_SVHS, /* card has no svhs */ - .needs_tvaudio = 0, .no_msp34xx = 1, .no_tda7432 = 1, .gpiomask = 0x00, @@ -2168,7 +2108,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 3, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 1, 1, 1, 1 }, - .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .pll = PLL_35, @@ -2210,7 +2149,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 0), .no_msp34xx = 1, .no_tda7432 = 1, - .needs_tvaudio = 0, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, }, @@ -2222,7 +2160,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .svhs = 2, - .needs_tvaudio = 0, .gpiomask = 0x68, .muxsel = MUXSEL(2, 3, 1), .gpiomux = { 0x68, 0x68, 0x61, 0x61 }, @@ -2241,7 +2178,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 1, 2, 2 }, .gpiomute = 3, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -2265,7 +2201,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 2, 2, 2), .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .pll = PLL_28, - .needs_tvaudio = 0, .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2358,7 +2293,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 2, 0, 0, 0 }, .gpiomute = 10, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -2405,7 +2339,6 @@ struct tvcard bttv_tvcards[] = { .tuner_addr = ADDR_UNSET, .gpiomask = 0x008007, .gpiomux = { 0, 0x000001,0,0 }, - .needs_tvaudio = 1, .has_radio = 1, }, [BTTV_BOARD_TIBET_CS16] = { @@ -2518,7 +2451,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, .gpiomute = 0x002000, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, .tuner_addr = 0xc1 >>1, @@ -2534,7 +2466,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 1, 2, 2 }, .gpiomute = 3, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TENA_9533_DI, .tuner_addr = ADDR_UNSET, @@ -2615,7 +2546,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 2, 0, 0, 0 }, .gpiomute = 1, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_NTSC, .tuner_addr = ADDR_UNSET, @@ -2714,7 +2644,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x20001,0x10001, 0, 0 }, .gpiomute = 10, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, .tuner_addr = ADDR_UNSET, @@ -2746,7 +2675,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */ .gpiomute = 3, /* CONTVFMi */ - .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */ .tuner_addr = ADDR_UNSET, .pll = PLL_28, @@ -2785,7 +2713,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x00, .muxsel = MUXSEL(0, 2, 3, 1), .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2799,7 +2726,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x00, .muxsel = MUXSEL(2, 3, 1), .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2813,7 +2739,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x00, .muxsel = MUXSEL(3, 2, 1), .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2877,7 +2802,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3), .gpiomux = { 0 }, - .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, @@ -3649,7 +3573,7 @@ void __devinit bttv_init_tuner(struct bttv *btv) struct tuner_setup tun_setup; /* Load tuner module before issuing tuner config call! */ - if (bttv_tvcards[btv->c.type].has_radio) + if (btv->has_radio) v4l2_i2c_new_subdev(&btv->c.v4l2_dev, &btv->c.i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); @@ -3664,7 +3588,7 @@ void __devinit bttv_init_tuner(struct bttv *btv) tun_setup.type = btv->tuner_type; tun_setup.addr = addr; - if (bttv_tvcards[btv->c.type].has_radio) + if (btv->has_radio) tun_setup.mode_mask |= T_RADIO; bttv_call_all(btv, tuner, s_type_addr, &tun_setup); @@ -3724,6 +3648,10 @@ static void __devinit hauppauge_eeprom(struct bttv *btv) bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name); btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB; } + + /* The 61334 needs the msp3410 to do the radio demod to get sound */ + if (tv.model == 61334) + btv->radio_uses_msp_demodulator = 1; } static int terratec_active_radio_upgrade(struct bttv *btv) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index a9cfb0f4be48..ff7a589d8e0f 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -1218,6 +1218,11 @@ audio_mux(struct bttv *btv, int input, int mute) For now this is sufficient. */ switch (input) { case TVAUDIO_INPUT_RADIO: + /* Some boards need the msp do to the radio demod */ + if (btv->radio_uses_msp_demodulator) { + in = MSP_INPUT_DEFAULT; + break; + } in = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1, MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); break; diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h index c5171619ac79..acfe2f3b92d9 100644 --- a/drivers/media/video/bt8xx/bttv.h +++ b/drivers/media/video/bt8xx/bttv.h @@ -236,7 +236,6 @@ struct tvcard { /* i2c audio flags */ unsigned int no_msp34xx:1; unsigned int no_tda7432:1; - unsigned int needs_tvaudio:1; unsigned int msp34xx_alt:1; /* Note: currently no card definition needs to mark the presence of a RDS saa6588 chip. If this is ever needed, then add a new diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h index db943a8d580d..70fd4f23f605 100644 --- a/drivers/media/video/bt8xx/bttvp.h +++ b/drivers/media/video/bt8xx/bttvp.h @@ -440,6 +440,7 @@ struct bttv { /* radio data/state */ int has_radio; int radio_user; + int radio_uses_msp_demodulator; /* miro/pinnacle + Aimslab VHX philips matchbox (tea5757 radio tuner) support */ diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c index 2520219f01ba..5b75a64b199b 100644 --- a/drivers/media/video/bw-qcam.c +++ b/drivers/media/video/bw-qcam.c @@ -607,8 +607,9 @@ static long qc_capture(struct qcam *q, char __user *buf, unsigned long len) } o = i * pixels_per_line + pixels_read + k; if (o < len) { + u8 ch = invert - buffer[k]; got++; - put_user((invert - buffer[k]) << shift, buf + o); + put_user(ch << shift, buf + o); } } pixels_read += bytes; @@ -648,8 +649,8 @@ static int qcam_querycap(struct file *file, void *priv, struct qcam *qcam = video_drvdata(file); strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver)); - strlcpy(vcap->card, "B&W Quickcam", sizeof(vcap->card)); - strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info)); + strlcpy(vcap->card, "Connectix B&W Quickcam", sizeof(vcap->card)); + strlcpy(vcap->bus_info, qcam->pport->name, sizeof(vcap->bus_info)); vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; @@ -688,8 +689,8 @@ static int qcam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f pix->height = qcam->height / qcam->transfer_scale; pix->pixelformat = (qcam->bpp == 4) ? V4L2_PIX_FMT_Y4 : V4L2_PIX_FMT_Y6; pix->field = V4L2_FIELD_NONE; - pix->bytesperline = qcam->width; - pix->sizeimage = qcam->width * qcam->height; + pix->bytesperline = pix->width; + pix->sizeimage = pix->width * pix->height; /* Just a guess */ pix->colorspace = V4L2_COLORSPACE_SRGB; return 0; @@ -757,7 +758,7 @@ static int qcam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdes "4-Bit Monochrome", V4L2_PIX_FMT_Y4, { 0, 0, 0, 0 } }, - { 0, 0, 0, + { 1, 0, 0, "6-Bit Monochrome", V4L2_PIX_FMT_Y6, { 0, 0, 0, 0 } }, @@ -772,6 +773,25 @@ static int qcam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdes return 0; } +static int qcam_enum_framesizes(struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize) +{ + static const struct v4l2_frmsize_discrete sizes[] = { + { 80, 60 }, + { 160, 120 }, + { 320, 240 }, + }; + + if (fsize->index > 2) + return -EINVAL; + if (fsize->pixel_format != V4L2_PIX_FMT_Y4 && + fsize->pixel_format != V4L2_PIX_FMT_Y6) + return -EINVAL; + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete = sizes[fsize->index]; + return 0; +} + static ssize_t qcam_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { @@ -795,6 +815,11 @@ static ssize_t qcam_read(struct file *file, char __user *buf, return len; } +static unsigned int qcam_poll(struct file *filp, poll_table *wait) +{ + return v4l2_ctrl_poll(filp, wait) | POLLIN | POLLRDNORM; +} + static int qcam_s_ctrl(struct v4l2_ctrl *ctrl) { struct qcam *qcam = @@ -828,7 +853,7 @@ static const struct v4l2_file_operations qcam_fops = { .owner = THIS_MODULE, .open = v4l2_fh_open, .release = v4l2_fh_release, - .poll = v4l2_ctrl_poll, + .poll = qcam_poll, .unlocked_ioctl = video_ioctl2, .read = qcam_read, }; @@ -839,6 +864,7 @@ static const struct v4l2_ioctl_ops qcam_ioctl_ops = { .vidioc_s_input = qcam_s_input, .vidioc_enum_input = qcam_enum_input, .vidioc_enum_fmt_vid_cap = qcam_enum_fmt_vid_cap, + .vidioc_enum_framesizes = qcam_enum_framesizes, .vidioc_g_fmt_vid_cap = qcam_g_fmt_vid_cap, .vidioc_s_fmt_vid_cap = qcam_s_fmt_vid_cap, .vidioc_try_fmt_vid_cap = qcam_try_fmt_vid_cap, @@ -864,9 +890,9 @@ static struct qcam *qcam_init(struct parport *port) return NULL; v4l2_dev = &qcam->v4l2_dev; - strlcpy(v4l2_dev->name, "bw-qcam", sizeof(v4l2_dev->name)); + snprintf(v4l2_dev->name, sizeof(v4l2_dev->name), "bw-qcam%d", num_cams); - if (v4l2_device_register(NULL, v4l2_dev) < 0) { + if (v4l2_device_register(port->dev, v4l2_dev) < 0) { v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); kfree(qcam); return NULL; @@ -886,7 +912,7 @@ static struct qcam *qcam_init(struct parport *port) return NULL; } qcam->pport = port; - qcam->pdev = parport_register_device(port, "bw-qcam", NULL, NULL, + qcam->pdev = parport_register_device(port, v4l2_dev->name, NULL, NULL, NULL, 0, NULL); if (qcam->pdev == NULL) { v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name); @@ -975,6 +1001,7 @@ static int init_bwqcam(struct parport *port) return -ENODEV; } qc_calibrate(qcam); + v4l2_ctrl_handler_setup(&qcam->hdl); parport_release(qcam->pdev); diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index b55d57cc1a1c..7e5ffd6f5178 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -838,10 +838,10 @@ static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *pci_dev, } CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, " - "irq: %d, latency: %d, memory: 0x%lx\n", + "irq: %d, latency: %d, memory: 0x%llx\n", cx->pci_dev->device, cx->card_rev, pci_dev->bus->number, PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn), - cx->pci_dev->irq, pci_latency, (unsigned long)cx->base_addr); + cx->pci_dev->irq, pci_latency, (u64)cx->base_addr); return 0; } @@ -938,7 +938,7 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev, if (retval) goto err; - CX18_DEBUG_INFO("base addr: 0x%08x\n", cx->base_addr); + CX18_DEBUG_INFO("base addr: 0x%llx\n", (u64)cx->base_addr); /* PCI Device Setup */ retval = cx18_setup_pci(cx, pci_dev, pci_id); @@ -946,8 +946,8 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev, goto free_workqueues; /* map io memory */ - CX18_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n", - cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE); + CX18_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n", + (u64)cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE); cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE); if (!cx->enc_mem) { diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 7a37e0ee136f..2767c64df0c8 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -622,7 +622,7 @@ struct cx18 { unique ID. Starts at 1, so 0 can be used as uninitialized value in the stream->id. */ - u32 base_addr; + resource_size_t base_addr; u8 card_rev; void __iomem *enc_mem, *reg_mem; diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c index 1b3fb502e6be..b85c292a849a 100644 --- a/drivers/media/video/cx18/cx18-firmware.c +++ b/drivers/media/video/cx18/cx18-firmware.c @@ -164,8 +164,13 @@ static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx, apu_version = (vers[0] << 24) | (vers[4] << 16) | vers[32]; while (offset + sizeof(seghdr) < fw->size) { - /* TODO: byteswapping */ - memcpy(&seghdr, src + offset / 4, sizeof(seghdr)); + const u32 *shptr = src + offset / 4; + + seghdr.sync1 = le32_to_cpu(shptr[0]); + seghdr.sync2 = le32_to_cpu(shptr[1]); + seghdr.addr = le32_to_cpu(shptr[2]); + seghdr.size = le32_to_cpu(shptr[3]); + offset += sizeof(seghdr); if (seghdr.sync1 != APU_ROM_SYNC1 || seghdr.sync2 != APU_ROM_SYNC2) { diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index ed8118390b02..eabf00c6351b 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -434,6 +434,7 @@ static int epu_dma_done_irq(struct cx18 *cx, struct cx18_in_work_order *order) { u32 handle, mdl_ack_offset, mdl_ack_count; struct cx18_mailbox *mb; + int i; mb = &order->mb; handle = mb->args[0]; @@ -447,8 +448,9 @@ static int epu_dma_done_irq(struct cx18 *cx, struct cx18_in_work_order *order) return -1; } - cx18_memcpy_fromio(cx, order->mdl_ack, cx->enc_mem + mdl_ack_offset, - sizeof(struct cx18_mdl_ack) * mdl_ack_count); + for (i = 0; i < sizeof(struct cx18_mdl_ack) * mdl_ack_count; i += sizeof(u32)) + ((u32 *)order->mdl_ack)[i / sizeof(u32)] = + cx18_readl(cx, cx->enc_mem + mdl_ack_offset + i); if ((order->flags & CX18_F_EWO_MB_STALE) == 0) mb_ack_irq(cx, order); @@ -538,6 +540,7 @@ void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu) struct cx18_mailbox *order_mb; struct cx18_in_work_order *order; int submit; + int i; switch (rpu) { case CPU: @@ -562,10 +565,12 @@ void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu) order_mb = &order->mb; /* mb->cmd and mb->args[0] through mb->args[2] */ - cx18_memcpy_fromio(cx, &order_mb->cmd, &mb->cmd, 4 * sizeof(u32)); + for (i = 0; i < 4; i++) + (&order_mb->cmd)[i] = cx18_readl(cx, &mb->cmd + i); + /* mb->request and mb->ack. N.B. we want to read mb->ack last */ - cx18_memcpy_fromio(cx, &order_mb->request, &mb->request, - 2 * sizeof(u32)); + for (i = 0; i < 2; i++) + (&order_mb->request)[i] = cx18_readl(cx, &mb->request + i); if (order_mb->request == order_mb->ack) { CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our " diff --git a/drivers/media/video/cx231xx/cx231xx-audio.c b/drivers/media/video/cx231xx/cx231xx-audio.c index 068f78dc5d13..b4c99c7270cf 100644 --- a/drivers/media/video/cx231xx/cx231xx-audio.c +++ b/drivers/media/video/cx231xx/cx231xx-audio.c @@ -307,7 +307,7 @@ static int cx231xx_init_audio_isoc(struct cx231xx *dev) urb->context = dev; urb->pipe = usb_rcvisocpipe(dev->udev, dev->adev.end_point_addr); - urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; + urb->transfer_flags = URB_ISO_ASAP; urb->transfer_buffer = dev->adev.transfer_buffer[i]; urb->interval = 1; urb->complete = cx231xx_audio_isocirq; @@ -368,7 +368,7 @@ static int cx231xx_init_audio_bulk(struct cx231xx *dev) urb->context = dev; urb->pipe = usb_rcvbulkpipe(dev->udev, dev->adev.end_point_addr); - urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; + urb->transfer_flags = 0; urb->transfer_buffer = dev->adev.transfer_buffer[i]; urb->complete = cx231xx_audio_bulkirq; urb->transfer_buffer_length = sb_size; diff --git a/drivers/media/video/cx231xx/cx231xx-vbi.c b/drivers/media/video/cx231xx/cx231xx-vbi.c index 3d15314e1f88..ac7db52f404f 100644 --- a/drivers/media/video/cx231xx/cx231xx-vbi.c +++ b/drivers/media/video/cx231xx/cx231xx-vbi.c @@ -448,7 +448,7 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets, return -ENOMEM; } dev->vbi_mode.bulk_ctl.urb[i] = urb; - urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; + urb->transfer_flags = 0; dev->vbi_mode.bulk_ctl.transfer_buffer[i] = kzalloc(sb_size, GFP_KERNEL); diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 13739e002a63..080e11157e5f 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -127,22 +127,37 @@ struct cx23885_board cx23885_boards[] = { }, [CX23885_BOARD_HAUPPAUGE_HVR1250] = { .name = "Hauppauge WinTV-HVR1250", + .porta = CX23885_ANALOG_VIDEO, .portc = CX23885_MPEG_DVB, +#ifdef MT2131_NO_ANALOG_SUPPORT_YET + .tuner_type = TUNER_PHILIPS_TDA8290, + .tuner_addr = 0x42, /* 0x84 >> 1 */ + .tuner_bus = 1, +#endif + .force_bff = 1, .input = {{ +#ifdef MT2131_NO_ANALOG_SUPPORT_YET .type = CX23885_VMUX_TELEVISION, - .vmux = 0, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1, + .amux = CX25840_AUDIO8, .gpio0 = 0xff00, }, { - .type = CX23885_VMUX_DEBUG, - .vmux = 0, - .gpio0 = 0xff01, - }, { +#endif .type = CX23885_VMUX_COMPOSITE1, - .vmux = 1, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN6_CH1, + .amux = CX25840_AUDIO7, .gpio0 = 0xff02, }, { .type = CX23885_VMUX_SVIDEO, - .vmux = 2, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .amux = CX25840_AUDIO7, .gpio0 = 0xff02, } }, }, @@ -267,7 +282,55 @@ struct cx23885_board cx23885_boards[] = { }, [CX23885_BOARD_HAUPPAUGE_HVR1255] = { .name = "Hauppauge WinTV-HVR1255", + .porta = CX23885_ANALOG_VIDEO, .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_ABSENT, + .tuner_addr = 0x42, /* 0x84 >> 1 */ + .force_bff = 1, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1 | + CX25840_DIF_ON, + .amux = CX25840_AUDIO8, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN6_CH1, + .amux = CX25840_AUDIO7, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .amux = CX25840_AUDIO7, + } }, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1255_22111] = { + .name = "Hauppauge WinTV-HVR1255", + .porta = CX23885_ANALOG_VIDEO, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_ABSENT, + .tuner_addr = 0x42, /* 0x84 >> 1 */ + .force_bff = 1, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1 | + CX25840_DIF_ON, + .amux = CX25840_AUDIO8, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .amux = CX25840_AUDIO7, + } }, }, [CX23885_BOARD_HAUPPAUGE_HVR1210] = { .name = "Hauppauge WinTV-HVR1210", @@ -624,7 +687,7 @@ struct cx23885_subid cx23885_subids[] = { }, { .subvendor = 0x0070, .subdevice = 0x2259, - .card = CX23885_BOARD_HAUPPAUGE_HVR1255, + .card = CX23885_BOARD_HAUPPAUGE_HVR1255_22111, }, { .subvendor = 0x0070, .subdevice = 0x2291, @@ -900,7 +963,7 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg) struct cx23885_dev *dev = port->dev; u32 bitmask = 0; - if (command == XC2028_RESET_CLK) + if ((command == XC2028_RESET_CLK) || (command == XC2028_I2C_FLUSH)) return 0; if (command != 0) { @@ -1130,6 +1193,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: case CX23885_BOARD_HAUPPAUGE_HVR1210: /* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */ /* GPIO-6 I2C Gate which can isolate the demod from the bus */ @@ -1267,6 +1331,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1400: case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: case CX23885_BOARD_HAUPPAUGE_HVR1210: /* FIXME: Implement me */ break; @@ -1424,6 +1489,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: case CX23885_BOARD_HAUPPAUGE_HVR1210: case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_HAUPPAUGE_HVR1290: @@ -1511,6 +1577,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: case CX23885_BOARD_HAUPPAUGE_HVR1210: case CX23885_BOARD_COMPRO_VIDEOMATE_E800: case CX23885_BOARD_HAUPPAUGE_HVR1290: @@ -1526,10 +1593,10 @@ void cx23885_card_setup(struct cx23885_dev *dev) */ switch (dev->board) { case CX23885_BOARD_TEVII_S470: - case CX23885_BOARD_HAUPPAUGE_HVR1250: /* Currently only enabled for the integrated IR controller */ if (!enable_885_ir) break; + case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1800lp: case CX23885_BOARD_HAUPPAUGE_HVR1700: @@ -1539,6 +1606,8 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: case CX23885_BOARD_COMPRO_VIDEOMATE_E800: + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_MYGICA_X8506: diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index a80a92c47455..cd542684ba02 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -712,6 +712,7 @@ static int dvb_register(struct cx23885_tsport *port) } break; case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: i2c_bus = &dev->i2c_bus[0]; fe0->dvb.frontend = dvb_attach(s5h1411_attach, &hcw_s5h1411_config, @@ -721,6 +722,11 @@ static int dvb_register(struct cx23885_tsport *port) 0x60, &dev->i2c_bus[1].i2c_adap, &hauppauge_tda18271_config); } + + tda18271_attach(&dev->ts1.analog_fe, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_tda18271_config); + break; case CX23885_BOARD_HAUPPAUGE_HVR1800: i2c_bus = &dev->i2c_bus[0]; diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index c654bdc7ccb2..22f8e7fbd665 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -505,6 +505,9 @@ static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input) if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1800) || (dev->board == CX23885_BOARD_MPX885) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1250) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) || (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850)) { /* Configure audio routing */ v4l2_subdev_call(dev->sd_cx25840, audio, s_routing, @@ -1578,7 +1581,9 @@ static int cx23885_set_freq_via_ops(struct cx23885_dev *dev, fe = vfe->dvb.frontend; - if (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) + if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111)) fe = &dev->ts1.analog_fe; if (fe && fe->ops.tuner_ops.set_analog_params) { @@ -1608,6 +1613,8 @@ int cx23885_set_frequency(struct file *file, void *priv, int ret; switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: case CX23885_BOARD_HAUPPAUGE_HVR1850: ret = cx23885_set_freq_via_ops(dev, f); break; diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index d884784a1c85..13c37ec07ae7 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -90,6 +90,7 @@ #define CX23885_BOARD_MYGICA_X8507 33 #define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34 #define CX23885_BOARD_TEVII_S471 35 +#define CX23885_BOARD_HAUPPAUGE_HVR1255_22111 36 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 diff --git a/drivers/media/video/cx25821/cx25821-core.c b/drivers/media/video/cx25821/cx25821-core.c index 83c1aa6b2e6c..f11f6f07e915 100644 --- a/drivers/media/video/cx25821/cx25821-core.c +++ b/drivers/media/video/cx25821/cx25821-core.c @@ -904,9 +904,6 @@ static int cx25821_dev_setup(struct cx25821_dev *dev) list_add_tail(&dev->devlist, &cx25821_devlist); mutex_unlock(&cx25821_devlist_mutex); - strcpy(cx25821_boards[UNKNOWN_BOARD].name, "unknown"); - strcpy(cx25821_boards[CX25821_BOARD].name, "cx25821"); - if (dev->pci->device != 0x8210) { pr_info("%s(): Exiting. Incorrect Hardware device = 0x%02x\n", __func__, dev->pci->device); diff --git a/drivers/media/video/cx25821/cx25821.h b/drivers/media/video/cx25821/cx25821.h index b9aa801b00a7..029f2934a6d8 100644 --- a/drivers/media/video/cx25821/cx25821.h +++ b/drivers/media/video/cx25821/cx25821.h @@ -187,7 +187,7 @@ enum port { }; struct cx25821_board { - char *name; + const char *name; enum port porta; enum port portb; enum port portc; diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index fc1ff69cffd0..d8eac3e30a7e 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -84,7 +84,7 @@ MODULE_PARM_DESC(debug, "Debugging messages [0=Off (default) 1=On]"); /* ----------------------------------------------------------------------- */ -static void cx23885_std_setup(struct i2c_client *client); +static void cx23888_std_setup(struct i2c_client *client); int cx25840_write(struct i2c_client *client, u16 addr, u8 value) { @@ -638,10 +638,13 @@ static void cx23885_initialize(struct i2c_client *client) finish_wait(&state->fw_wait, &wait); destroy_workqueue(q); - /* Call the cx23885 specific std setup func, we no longer rely on + /* Call the cx23888 specific std setup func, we no longer rely on * the generic cx24840 func. */ - cx23885_std_setup(client); + if (is_cx23888(state)) + cx23888_std_setup(client); + else + cx25840_std_setup(client); /* (re)set input */ set_input(client, state->vid_input, state->aud_input); @@ -1103,9 +1106,23 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp cx25840_write4(client, 0x410, 0xffff0dbf); cx25840_write4(client, 0x414, 0x00137d03); - cx25840_write4(client, 0x418, 0x01008080); + + /* on the 887, 0x418 is HSCALE_CTRL, on the 888 it is + CHROMA_CTRL */ + if (is_cx23888(state)) + cx25840_write4(client, 0x418, 0x01008080); + else + cx25840_write4(client, 0x418, 0x01000000); + cx25840_write4(client, 0x41c, 0x00000000); - cx25840_write4(client, 0x420, 0x001c3e0f); + + /* on the 887, 0x420 is CHROMA_CTRL, on the 888 it is + CRUSH_CTRL */ + if (is_cx23888(state)) + cx25840_write4(client, 0x420, 0x001c3e0f); + else + cx25840_write4(client, 0x420, 0x001c8282); + cx25840_write4(client, 0x42c, 0x42600000); cx25840_write4(client, 0x430, 0x0000039b); cx25840_write4(client, 0x438, 0x00000000); @@ -1233,7 +1250,7 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp cx25840_write4(client, 0x8d0, 0x1f063870); } - if (is_cx2388x(state)) { + if (is_cx23888(state)) { /* HVR1850 */ /* AUD_IO_CTRL - I2S Input, Parallel1*/ /* - Channel 1 src - Parallel1 (Merlin out) */ @@ -1298,8 +1315,8 @@ static int set_v4lstd(struct i2c_client *client) } cx25840_and_or(client, 0x400, ~0xf, fmt); cx25840_and_or(client, 0x403, ~0x3, pal_m); - if (is_cx2388x(state)) - cx23885_std_setup(client); + if (is_cx23888(state)) + cx23888_std_setup(client); else cx25840_std_setup(client); if (!is_cx2583x(state)) @@ -1312,6 +1329,7 @@ static int set_v4lstd(struct i2c_client *client) static int cx25840_s_ctrl(struct v4l2_ctrl *ctrl) { struct v4l2_subdev *sd = to_sd(ctrl); + struct cx25840_state *state = to_state(sd); struct i2c_client *client = v4l2_get_subdevdata(sd); switch (ctrl->id) { @@ -1324,12 +1342,20 @@ static int cx25840_s_ctrl(struct v4l2_ctrl *ctrl) break; case V4L2_CID_SATURATION: - cx25840_write(client, 0x420, ctrl->val << 1); - cx25840_write(client, 0x421, ctrl->val << 1); + if (is_cx23888(state)) { + cx25840_write(client, 0x418, ctrl->val << 1); + cx25840_write(client, 0x419, ctrl->val << 1); + } else { + cx25840_write(client, 0x420, ctrl->val << 1); + cx25840_write(client, 0x421, ctrl->val << 1); + } break; case V4L2_CID_HUE: - cx25840_write(client, 0x422, ctrl->val); + if (is_cx23888(state)) + cx25840_write(client, 0x41a, ctrl->val); + else + cx25840_write(client, 0x422, ctrl->val); break; default: @@ -1354,11 +1380,21 @@ static int cx25840_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt fmt->field = V4L2_FIELD_INTERLACED; fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; - Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4; - Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4; + if (is_cx23888(state)) { + Vsrc = (cx25840_read(client, 0x42a) & 0x3f) << 4; + Vsrc |= (cx25840_read(client, 0x429) & 0xf0) >> 4; + } else { + Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4; + Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4; + } - Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4; - Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4; + if (is_cx23888(state)) { + Hsrc = (cx25840_read(client, 0x426) & 0x3f) << 4; + Hsrc |= (cx25840_read(client, 0x425) & 0xf0) >> 4; + } else { + Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4; + Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4; + } Vlines = fmt->height + (is_50Hz ? 4 : 7); @@ -1782,8 +1818,8 @@ static int cx25840_s_video_routing(struct v4l2_subdev *sd, struct cx25840_state *state = to_state(sd); struct i2c_client *client = v4l2_get_subdevdata(sd); - if (is_cx2388x(state)) - cx23885_std_setup(client); + if (is_cx23888(state)) + cx23888_std_setup(client); return set_input(client, input, state->aud_input); } @@ -1794,8 +1830,8 @@ static int cx25840_s_audio_routing(struct v4l2_subdev *sd, struct cx25840_state *state = to_state(sd); struct i2c_client *client = v4l2_get_subdevdata(sd); - if (is_cx2388x(state)) - cx23885_std_setup(client); + if (is_cx23888(state)) + cx23888_std_setup(client); return set_input(client, state->vid_input, input); } @@ -4939,7 +4975,7 @@ void cx23885_dif_setup(struct i2c_client *client, u32 ifHz) } } -static void cx23885_std_setup(struct i2c_client *client) +static void cx23888_std_setup(struct i2c_client *client) { struct cx25840_state *state = to_state(i2c_get_clientdata(client)); v4l2_std_id std = state->std; diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index e46446a449c0..ed7b2aa1ed83 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -471,7 +471,7 @@ static int blackbird_load_firmware(struct cx8802_dev *dev) dprintk(1,"Loading firmware ...\n"); dataptr = (u32*)firmware->data; for (i = 0; i < (firmware->size >> 2); i++) { - value = *dataptr; + value = le32_to_cpu(*dataptr); checksum += ~value; memory_write(dev->core, i, value); dataptr++; diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 20a7e24de6fb..862c6575c557 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -974,6 +974,7 @@ struct em28xx_board em28xx_boards[] = { [EM2884_BOARD_CINERGY_HTC_STICK] = { .name = "Terratec Cinergy HTC Stick", .has_dvb = 1, + .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, #if 0 .tuner_type = TUNER_PHILIPS_TDA8290, .tuner_addr = 0x41, @@ -2892,7 +2893,7 @@ static void request_module_async(struct work_struct *work) if (dev->board.has_dvb) request_module("em28xx-dvb"); - if (dev->board.has_ir_i2c && !disable_ir) + if (dev->board.ir_codes && !disable_ir) request_module("em28xx-rc"); } diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c index fce5f7680c99..5e30c4f3f248 100644 --- a/drivers/media/video/em28xx/em28xx-input.c +++ b/drivers/media/video/em28xx/em28xx-input.c @@ -527,6 +527,8 @@ static int em28xx_ir_init(struct em28xx *dev) if (dev->board.ir_codes == NULL) { /* No remote control support */ + em28xx_warn("Remote control support is not available for " + "this card.\n"); return 0; } diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 137166d73945..31721eadc597 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1653,7 +1653,7 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type buf_type) { struct gspca_dev *gspca_dev = video_drvdata(file); - int ret; + int i, ret; if (buf_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; @@ -1678,6 +1678,8 @@ static int vidioc_streamoff(struct file *file, void *priv, wake_up_interruptible(&gspca_dev->wq); /* empty the transfer queues */ + for (i = 0; i < gspca_dev->nframes; i++) + gspca_dev->frame[i].v4l2_buf.flags &= ~BUF_ALL_FLAGS; atomic_set(&gspca_dev->fr_q, 0); atomic_set(&gspca_dev->fr_i, 0); gspca_dev->fr_o = 0; diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c index b5acb1e4b4e7..80c81dd6d68b 100644 --- a/drivers/media/video/gspca/ov534.c +++ b/drivers/media/video/gspca/ov534.c @@ -96,7 +96,7 @@ static void setbrightness(struct gspca_dev *gspca_dev); static void setcontrast(struct gspca_dev *gspca_dev); static void setgain(struct gspca_dev *gspca_dev); static void setexposure(struct gspca_dev *gspca_dev); -static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val); +static void setagc(struct gspca_dev *gspca_dev); static void setawb(struct gspca_dev *gspca_dev); static void setaec(struct gspca_dev *gspca_dev); static void setsharpness(struct gspca_dev *gspca_dev); @@ -189,7 +189,7 @@ static const struct ctrl sd_ctrls[] = { .step = 1, .default_value = 1, }, - .set = sd_setagc + .set_control = setagc }, [AWB] = { { @@ -851,6 +851,7 @@ static int sccb_check_status(struct gspca_dev *gspca_dev) int i; for (i = 0; i < 5; i++) { + msleep(10); data = ov534_reg_read(gspca_dev, OV534_REG_STATUS); switch (data) { @@ -1242,10 +1243,6 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->ctrls = sd->ctrls; - /* the auto white balance control works only when auto gain is set */ - if (sd_ctrls[AGC].qctrl.default_value == 0) - gspca_dev->ctrl_inac |= (1 << AWB); - cam->cam_mode = ov772x_mode; cam->nmodes = ARRAY_SIZE(ov772x_mode); @@ -1486,29 +1483,6 @@ scan_next: } while (remaining_len > 0); } -static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->ctrls[AGC].val = val; - - /* the auto white balance control works only - * when auto gain is set */ - if (val) { - gspca_dev->ctrl_inac &= ~(1 << AWB); - } else { - gspca_dev->ctrl_inac |= (1 << AWB); - if (sd->ctrls[AWB].val) { - sd->ctrls[AWB].val = 0; - if (gspca_dev->streaming) - setawb(gspca_dev); - } - } - if (gspca_dev->streaming) - setagc(gspca_dev); - return gspca_dev->usb_err; -} - static int sd_querymenu(struct gspca_dev *gspca_dev, struct v4l2_querymenu *menu) { diff --git a/drivers/media/video/gspca/ov534_9.c b/drivers/media/video/gspca/ov534_9.c index b5797308a39b..1fd41f0d2e95 100644 --- a/drivers/media/video/gspca/ov534_9.c +++ b/drivers/media/video/gspca/ov534_9.c @@ -1008,6 +1008,7 @@ static int sccb_check_status(struct gspca_dev *gspca_dev) int i; for (i = 0; i < 5; i++) { + msleep(10); data = reg_r(gspca_dev, OV534_REG_STATUS); switch (data) { diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 2cb7d95f7be7..115da169f32a 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -418,7 +418,7 @@ static int sd_init_controls(struct gspca_dev *gspca_dev) struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler; gspca_dev->vdev.ctrl_handler = hdl; - v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_handler_init(hdl, 5); sd->contrast = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_CONTRAST, 0, 15, 1, 7); diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c index ad098202d7f0..b9c6f17eabb2 100644 --- a/drivers/media/video/gspca/sn9c20x.c +++ b/drivers/media/video/gspca/sn9c20x.c @@ -1761,7 +1761,6 @@ static int sd_init_controls(struct gspca_dev *gspca_dev) V4L2_CID_SATURATION, 0, 255, 1, 127); sd->hue = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_HUE, -180, 180, 1, 0); - v4l2_ctrl_cluster(4, &sd->brightness); sd->gamma = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_GAMMA, 0, 255, 1, 0x10); @@ -1770,7 +1769,6 @@ static int sd_init_controls(struct gspca_dev *gspca_dev) V4L2_CID_BLUE_BALANCE, 0, 127, 1, 0x28); sd->red = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_RED_BALANCE, 0, 127, 1, 0x28); - v4l2_ctrl_cluster(2, &sd->blue); if (sd->sensor != SENSOR_OV9655 && sd->sensor != SENSOR_SOI968 && sd->sensor != SENSOR_OV7670 && sd->sensor != SENSOR_MT9M001 && @@ -1779,7 +1777,6 @@ static int sd_init_controls(struct gspca_dev *gspca_dev) V4L2_CID_HFLIP, 0, 1, 1, 0); sd->vflip = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0); - v4l2_ctrl_cluster(2, &sd->hflip); } if (sd->sensor != SENSOR_SOI968 && sd->sensor != SENSOR_MT9VPRB && @@ -1794,6 +1791,20 @@ static int sd_init_controls(struct gspca_dev *gspca_dev) V4L2_CID_GAIN, 0, 28, 1, 0); sd->autogain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_AUTOGAIN, 0, 1, 1, 1); + } + + sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, + V4L2_CID_JPEG_COMPRESSION_QUALITY, 50, 90, 1, 80); + if (hdl->error) { + pr_err("Could not initialize controls\n"); + return hdl->error; + } + + v4l2_ctrl_cluster(4, &sd->brightness); + v4l2_ctrl_cluster(2, &sd->blue); + if (sd->hflip) + v4l2_ctrl_cluster(2, &sd->hflip); + if (sd->autogain) { if (sd->sensor == SENSOR_SOI968) /* this sensor doesn't have the exposure control and autogain is clustered with gain instead. This works @@ -1803,13 +1814,6 @@ static int sd_init_controls(struct gspca_dev *gspca_dev) /* Otherwise autogain is clustered with exposure. */ v4l2_ctrl_auto_cluster(2, &sd->autogain, 0, false); } - - sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, - V4L2_CID_JPEG_COMPRESSION_QUALITY, 50, 90, 1, 80); - if (hdl->error) { - pr_err("Could not initialize controls\n"); - return hdl->error; - } return 0; } @@ -2066,10 +2070,13 @@ static int sd_start(struct gspca_dev *gspca_dev) set_gamma(gspca_dev, v4l2_ctrl_g_ctrl(sd->gamma)); set_redblue(gspca_dev, v4l2_ctrl_g_ctrl(sd->blue), v4l2_ctrl_g_ctrl(sd->red)); - set_gain(gspca_dev, v4l2_ctrl_g_ctrl(sd->gain)); - set_exposure(gspca_dev, v4l2_ctrl_g_ctrl(sd->exposure)); - set_hvflip(gspca_dev, v4l2_ctrl_g_ctrl(sd->hflip), - v4l2_ctrl_g_ctrl(sd->vflip)); + if (sd->gain) + set_gain(gspca_dev, v4l2_ctrl_g_ctrl(sd->gain)); + if (sd->exposure) + set_exposure(gspca_dev, v4l2_ctrl_g_ctrl(sd->exposure)); + if (sd->hflip) + set_hvflip(gspca_dev, v4l2_ctrl_g_ctrl(sd->hflip), + v4l2_ctrl_g_ctrl(sd->vflip)); reg_w1(gspca_dev, 0x1007, 0x20); reg_w1(gspca_dev, 0x1061, 0x03); @@ -2172,7 +2179,7 @@ static void sd_dqcallback(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; int avg_lum; - if (!v4l2_ctrl_g_ctrl(sd->autogain)) + if (sd->autogain == NULL || !v4l2_ctrl_g_ctrl(sd->autogain)) return; avg_lum = atomic_read(&sd->avg_lum); diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 4d1696d1a7f4..f38faa9b37c3 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -3120,7 +3120,7 @@ static const struct sd_desc sd_desc = { | (SENSOR_ ## sensor << 8) \ | (flags) static const struct usb_device_id device_table[] = { - {USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)}, + {USB_DEVICE(0x0458, 0x7025), BSF(SN9C120, MI0360B, F_PDN_INV)}, {USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)}, {USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, F_PDN_INV)}, {USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, F_PDN_INV)}, diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 057929e165ab..5462ce2f60ea 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -866,10 +866,10 @@ static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *pdev, pci_write_config_dword(pdev, 0x40, 0xffff); IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, " - "irq: %d, latency: %d, memory: 0x%lx\n", + "irq: %d, latency: %d, memory: 0x%llx\n", pdev->device, pdev->revision, pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), - pdev->irq, pci_latency, (unsigned long)itv->base_addr); + pdev->irq, pci_latency, (u64)itv->base_addr); return 0; } @@ -1007,7 +1007,7 @@ static int __devinit ivtv_probe(struct pci_dev *pdev, itv->cxhdl.priv = itv; itv->cxhdl.func = ivtv_api_func; - IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv->base_addr); + IVTV_DEBUG_INFO("base addr: 0x%llx\n", (u64)itv->base_addr); /* PCI Device Setup */ retval = ivtv_setup_pci(itv, pdev, pci_id); @@ -1017,8 +1017,8 @@ static int __devinit ivtv_probe(struct pci_dev *pdev, goto free_mem; /* map io memory */ - IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n", - itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE); + IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n", + (u64)itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE); itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE); if (!itv->enc_mem) { @@ -1034,8 +1034,8 @@ static int __devinit ivtv_probe(struct pci_dev *pdev, } if (itv->has_cx23415) { - IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n", - itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE); + IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n", + (u64)itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE); itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE); if (!itv->dec_mem) { @@ -1056,8 +1056,8 @@ static int __devinit ivtv_probe(struct pci_dev *pdev, } /* map registers memory */ - IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n", - itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); + IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n", + (u64)itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); itv->reg_mem = ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); if (!itv->reg_mem) { diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 2e220028aad2..a7e00f8938f8 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -622,7 +622,7 @@ struct ivtv { struct v4l2_subdev *sd_video; /* controlling video decoder subdev */ struct v4l2_subdev *sd_audio; /* controlling audio subdev */ struct v4l2_subdev *sd_muxer; /* controlling audio muxer subdev */ - u32 base_addr; /* PCI resource base address */ + resource_size_t base_addr; /* PCI resource base address */ volatile void __iomem *enc_mem; /* pointer to mapped encoder memory */ volatile void __iomem *dec_mem; /* pointer to mapped decoder memory */ volatile void __iomem *reg_mem; /* pointer to mapped registers */ diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c index d2dec585e61b..3945556f5733 100644 --- a/drivers/media/video/mem2mem_testdev.c +++ b/drivers/media/video/mem2mem_testdev.c @@ -110,22 +110,6 @@ enum { V4L2_M2M_DST = 1, }; -/* Source and destination queue data */ -static struct m2mtest_q_data q_data[2]; - -static struct m2mtest_q_data *get_q_data(enum v4l2_buf_type type) -{ - switch (type) { - case V4L2_BUF_TYPE_VIDEO_OUTPUT: - return &q_data[V4L2_M2M_SRC]; - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - return &q_data[V4L2_M2M_DST]; - default: - BUG(); - } - return NULL; -} - #define V4L2_CID_TRANS_TIME_MSEC V4L2_CID_PRIVATE_BASE #define V4L2_CID_TRANS_NUM_BUFS (V4L2_CID_PRIVATE_BASE + 1) @@ -198,8 +182,26 @@ struct m2mtest_ctx { int aborting; struct v4l2_m2m_ctx *m2m_ctx; + + /* Source and destination queue data */ + struct m2mtest_q_data q_data[2]; }; +static struct m2mtest_q_data *get_q_data(struct m2mtest_ctx *ctx, + enum v4l2_buf_type type) +{ + switch (type) { + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + return &ctx->q_data[V4L2_M2M_SRC]; + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return &ctx->q_data[V4L2_M2M_DST]; + default: + BUG(); + } + return NULL; +} + + static struct v4l2_queryctrl *get_ctrl(int id) { int i; @@ -223,7 +225,7 @@ static int device_process(struct m2mtest_ctx *ctx, int tile_w, bytes_left; int width, height, bytesperline; - q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_OUTPUT); + q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); width = q_data->width; height = q_data->height; @@ -436,7 +438,7 @@ static int vidioc_g_fmt(struct m2mtest_ctx *ctx, struct v4l2_format *f) if (!vq) return -EINVAL; - q_data = get_q_data(f->type); + q_data = get_q_data(ctx, f->type); f->fmt.pix.width = q_data->width; f->fmt.pix.height = q_data->height; @@ -535,7 +537,7 @@ static int vidioc_s_fmt(struct m2mtest_ctx *ctx, struct v4l2_format *f) if (!vq) return -EINVAL; - q_data = get_q_data(f->type); + q_data = get_q_data(ctx, f->type); if (!q_data) return -EINVAL; @@ -747,7 +749,7 @@ static int m2mtest_queue_setup(struct vb2_queue *vq, struct m2mtest_q_data *q_data; unsigned int size, count = *nbuffers; - q_data = get_q_data(vq->type); + q_data = get_q_data(ctx, vq->type); size = q_data->width * q_data->height * q_data->fmt->depth >> 3; @@ -775,7 +777,7 @@ static int m2mtest_buf_prepare(struct vb2_buffer *vb) dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type); - q_data = get_q_data(vb->vb2_queue->type); + q_data = get_q_data(ctx, vb->vb2_queue->type); if (vb2_plane_size(vb, 0) < q_data->sizeimage) { dprintk(ctx->dev, "%s data will not fit into plane (%lu < %lu)\n", @@ -860,6 +862,9 @@ static int m2mtest_open(struct file *file) ctx->transtime = MEM2MEM_DEF_TRANSTIME; ctx->num_processed = 0; + ctx->q_data[V4L2_M2M_SRC].fmt = &formats[0]; + ctx->q_data[V4L2_M2M_DST].fmt = &formats[0]; + ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init); if (IS_ERR(ctx->m2m_ctx)) { @@ -986,9 +991,6 @@ static int m2mtest_probe(struct platform_device *pdev) goto err_m2m; } - q_data[V4L2_M2M_SRC].fmt = &formats[0]; - q_data[V4L2_M2M_DST].fmt = &formats[0]; - return 0; v4l2_m2m_release(dev->m2m_dev); diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c index ded26b7286fa..637bde8aca28 100644 --- a/drivers/media/video/mx2_camera.c +++ b/drivers/media/video/mx2_camera.c @@ -83,6 +83,7 @@ #define CSICR1_INV_DATA (1 << 3) #define CSICR1_INV_PCLK (1 << 2) #define CSICR1_REDGE (1 << 1) +#define CSICR1_FMT_MASK (CSICR1_PACK_DIR | CSICR1_SWAP16_EN) #define SHIFT_STATFF_LEVEL 22 #define SHIFT_RXFF_LEVEL 19 @@ -230,6 +231,7 @@ struct mx2_prp_cfg { u32 src_pixel; u32 ch1_pixel; u32 irq_flags; + u32 csicr1; }; /* prp resizing parameters */ @@ -330,6 +332,7 @@ static struct mx2_fmt_cfg mx27_emma_prp_table[] = { .ch1_pixel = 0x2ca00565, /* RGB565 */ .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH1WERR | PRP_INTR_CH1FC | PRP_INTR_LBOVF, + .csicr1 = 0, } }, { @@ -343,6 +346,7 @@ static struct mx2_fmt_cfg mx27_emma_prp_table[] = { .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR | PRP_INTR_CH2FC | PRP_INTR_LBOVF | PRP_INTR_CH2OVF, + .csicr1 = CSICR1_PACK_DIR, } }, { @@ -356,6 +360,7 @@ static struct mx2_fmt_cfg mx27_emma_prp_table[] = { .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR | PRP_INTR_CH2FC | PRP_INTR_LBOVF | PRP_INTR_CH2OVF, + .csicr1 = CSICR1_SWAP16_EN, } }, }; @@ -984,7 +989,6 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd) struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; - const struct soc_camera_format_xlate *xlate; unsigned long common_flags; int ret; int bytesperline; @@ -1029,24 +1033,7 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd) return ret; } - xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); - if (!xlate) { - dev_warn(icd->parent, "Format %x not found\n", pixfmt); - return -EINVAL; - } - - if (xlate->code == V4L2_MBUS_FMT_YUYV8_2X8) { - csicr1 |= CSICR1_PACK_DIR; - csicr1 &= ~CSICR1_SWAP16_EN; - dev_dbg(icd->parent, "already yuyv format, don't convert\n"); - } else if (xlate->code == V4L2_MBUS_FMT_UYVY8_2X8) { - csicr1 &= ~CSICR1_PACK_DIR; - csicr1 |= CSICR1_SWAP16_EN; - dev_dbg(icd->parent, "convert uyvy mbus format into yuyv\n"); - } else { - dev_warn(icd->parent, "mbus format not supported\n"); - return -EINVAL; - } + csicr1 = (csicr1 & ~CSICR1_FMT_MASK) | pcdev->emma_prp->cfg.csicr1; if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) csicr1 |= CSICR1_REDGE; @@ -1155,18 +1142,6 @@ static int mx2_camera_get_formats(struct soc_camera_device *icd, } } - if (code == V4L2_MBUS_FMT_UYVY8_2X8) { - formats++; - if (xlate) { - xlate->host_fmt = - soc_mbus_get_fmtdesc(V4L2_MBUS_FMT_YUYV8_2X8); - xlate->code = code; - dev_dbg(dev, "Providing host format %s for sensor code %d\n", - xlate->host_fmt->name, code); - xlate++; - } - } - /* Generic pass-trough */ formats++; if (xlate) { diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c index 8a4935ecc655..dd91da26f1b0 100644 --- a/drivers/media/video/omap3isp/isppreview.c +++ b/drivers/media/video/omap3isp/isppreview.c @@ -888,12 +888,12 @@ static const struct preview_update update_attrs[] = { preview_config_contrast, NULL, offsetof(struct prev_params, contrast), - 0, true, + 0, 0, true, }, /* OMAP3ISP_PREV_BRIGHTNESS */ { preview_config_brightness, NULL, offsetof(struct prev_params, brightness), - 0, true, + 0, 0, true, }, }; @@ -1102,7 +1102,7 @@ static void preview_config_input_size(struct isp_prev_device *prev, u32 active) unsigned int elv = prev->crop.top + prev->crop.height - 1; u32 features; - if (format->code == V4L2_MBUS_FMT_Y10_1X10) { + if (format->code != V4L2_MBUS_FMT_Y10_1X10) { sph -= 2; eph += 2; slv -= 2; diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c index af2d9086d7e8..b4c679b3fb0f 100644 --- a/drivers/media/video/pms.c +++ b/drivers/media/video/pms.c @@ -26,9 +26,11 @@ #include #include #include +#include #include #include #include +#include #include #include #include diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index 354574591908..725812aa0c30 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -350,7 +350,8 @@ static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *pfmt, if (pixm) sizes[i] = max(size, pixm->plane_fmt[i].sizeimage); else - sizes[i] = size; + sizes[i] = max_t(u32, size, frame->payload[i]); + allocators[i] = ctx->fimc_dev->alloc_ctx; } @@ -479,37 +480,39 @@ static int fimc_capture_set_default_format(struct fimc_dev *fimc); static int fimc_capture_open(struct file *file) { struct fimc_dev *fimc = video_drvdata(file); - int ret = v4l2_fh_open(file); - - if (ret) - return ret; + int ret; dbg("pid: %d, state: 0x%lx", task_pid_nr(current), fimc->state); - /* Return if the corresponding video mem2mem node is already opened. */ if (fimc_m2m_active(fimc)) return -EBUSY; set_bit(ST_CAPT_BUSY, &fimc->state); - pm_runtime_get_sync(&fimc->pdev->dev); + ret = pm_runtime_get_sync(&fimc->pdev->dev); + if (ret < 0) + return ret; - if (++fimc->vid_cap.refcnt == 1) { - ret = fimc_pipeline_initialize(&fimc->pipeline, - &fimc->vid_cap.vfd->entity, true); - if (ret < 0) { - dev_err(&fimc->pdev->dev, - "Video pipeline initialization failed\n"); - pm_runtime_put_sync(&fimc->pdev->dev); - fimc->vid_cap.refcnt--; - v4l2_fh_release(file); - clear_bit(ST_CAPT_BUSY, &fimc->state); - return ret; - } - ret = fimc_capture_ctrls_create(fimc); + ret = v4l2_fh_open(file); + if (ret) + return ret; - if (!ret && !fimc->vid_cap.user_subdev_api) - ret = fimc_capture_set_default_format(fimc); + if (++fimc->vid_cap.refcnt != 1) + return 0; + + ret = fimc_pipeline_initialize(&fimc->pipeline, + &fimc->vid_cap.vfd->entity, true); + if (ret < 0) { + clear_bit(ST_CAPT_BUSY, &fimc->state); + pm_runtime_put_sync(&fimc->pdev->dev); + fimc->vid_cap.refcnt--; + v4l2_fh_release(file); + return ret; } + ret = fimc_capture_ctrls_create(fimc); + + if (!ret && !fimc->vid_cap.user_subdev_api) + ret = fimc_capture_set_default_format(fimc); + return ret; } @@ -818,9 +821,6 @@ static int fimc_cap_g_fmt_mplane(struct file *file, void *fh, struct fimc_dev *fimc = video_drvdata(file); struct fimc_ctx *ctx = fimc->vid_cap.ctx; - if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) - return -EINVAL; - return fimc_fill_format(&ctx->d_frame, f); } @@ -833,9 +833,6 @@ static int fimc_cap_try_fmt_mplane(struct file *file, void *fh, struct v4l2_mbus_framefmt mf; struct fimc_fmt *ffmt = NULL; - if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) - return -EINVAL; - if (pix->pixelformat == V4L2_PIX_FMT_JPEG) { fimc_capture_try_format(ctx, &pix->width, &pix->height, NULL, &pix->pixelformat, @@ -887,8 +884,6 @@ static int fimc_capture_set_format(struct fimc_dev *fimc, struct v4l2_format *f) struct fimc_fmt *s_fmt = NULL; int ret, i; - if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) - return -EINVAL; if (vb2_is_busy(&fimc->vid_cap.vbq)) return -EBUSY; @@ -924,10 +919,10 @@ static int fimc_capture_set_format(struct fimc_dev *fimc, struct v4l2_format *f) pix->width = mf->width; pix->height = mf->height; } + fimc_adjust_mplane_format(ff->fmt, pix->width, pix->height, pix); for (i = 0; i < ff->fmt->colplanes; i++) - ff->payload[i] = - (pix->width * pix->height * ff->fmt->depth[i]) / 8; + ff->payload[i] = pix->plane_fmt[i].sizeimage; set_frame_bounds(ff, pix->width, pix->height); /* Reset the composition rectangle if not yet configured */ @@ -1045,18 +1040,22 @@ static int fimc_cap_streamon(struct file *file, void *priv, { struct fimc_dev *fimc = video_drvdata(file); struct fimc_pipeline *p = &fimc->pipeline; + struct v4l2_subdev *sd = p->subdevs[IDX_SENSOR]; int ret; if (fimc_capture_active(fimc)) return -EBUSY; - media_entity_pipeline_start(&p->subdevs[IDX_SENSOR]->entity, - p->m_pipeline); + ret = media_entity_pipeline_start(&sd->entity, p->m_pipeline); + if (ret < 0) + return ret; if (fimc->vid_cap.user_subdev_api) { ret = fimc_pipeline_validate(fimc); - if (ret) + if (ret < 0) { + media_entity_pipeline_stop(&sd->entity); return ret; + } } return vb2_streamon(&fimc->vid_cap.vbq, type); } diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index fedcd561ba27..a4646ca1d56f 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -153,7 +153,7 @@ static struct fimc_fmt fimc_formats[] = { .colplanes = 2, .flags = FMT_FLAGS_M2M, }, { - .name = "YUV 4:2:0 non-contiguous 2-planar, Y/CbCr", + .name = "YUV 4:2:0 non-contig. 2p, Y/CbCr", .fourcc = V4L2_PIX_FMT_NV12M, .color = FIMC_FMT_YCBCR420, .depth = { 8, 4 }, @@ -161,7 +161,7 @@ static struct fimc_fmt fimc_formats[] = { .colplanes = 2, .flags = FMT_FLAGS_M2M, }, { - .name = "YUV 4:2:0 non-contiguous 3-planar, Y/Cb/Cr", + .name = "YUV 4:2:0 non-contig. 3p, Y/Cb/Cr", .fourcc = V4L2_PIX_FMT_YUV420M, .color = FIMC_FMT_YCBCR420, .depth = { 8, 2, 2 }, @@ -169,7 +169,7 @@ static struct fimc_fmt fimc_formats[] = { .colplanes = 3, .flags = FMT_FLAGS_M2M, }, { - .name = "YUV 4:2:0 non-contiguous 2-planar, Y/CbCr, tiled", + .name = "YUV 4:2:0 non-contig. 2p, tiled", .fourcc = V4L2_PIX_FMT_NV12MT, .color = FIMC_FMT_YCBCR420, .depth = { 8, 4 }, @@ -615,7 +615,7 @@ int fimc_ctrls_create(struct fimc_ctx *ctx) ctx->effect.type = FIMC_REG_CIIMGEFF_FIN_BYPASS; if (!handler->error) { - v4l2_ctrl_cluster(3, &ctrls->colorfx); + v4l2_ctrl_cluster(2, &ctrls->colorfx); ctrls->ready = true; } @@ -641,7 +641,7 @@ void fimc_ctrls_activate(struct fimc_ctx *ctx, bool active) if (!ctrls->ready) return; - mutex_lock(&ctrls->handler.lock); + mutex_lock(ctrls->handler.lock); v4l2_ctrl_activate(ctrls->rotate, active); v4l2_ctrl_activate(ctrls->hflip, active); v4l2_ctrl_activate(ctrls->vflip, active); @@ -660,7 +660,7 @@ void fimc_ctrls_activate(struct fimc_ctx *ctx, bool active) ctx->hflip = 0; ctx->vflip = 0; } - mutex_unlock(&ctrls->handler.lock); + mutex_unlock(ctrls->handler.lock); } /* Update maximum value of the alpha color control */ @@ -741,8 +741,8 @@ void fimc_adjust_mplane_format(struct fimc_fmt *fmt, u32 width, u32 height, pix->width = width; for (i = 0; i < pix->num_planes; ++i) { - u32 bpl = pix->plane_fmt[i].bytesperline; - u32 *sizeimage = &pix->plane_fmt[i].sizeimage; + struct v4l2_plane_pix_format *plane_fmt = &pix->plane_fmt[i]; + u32 bpl = plane_fmt->bytesperline; if (fmt->colplanes > 1 && (bpl == 0 || bpl < pix->width)) bpl = pix->width; /* Planar */ @@ -754,8 +754,9 @@ void fimc_adjust_mplane_format(struct fimc_fmt *fmt, u32 width, u32 height, if (i == 0) /* Same bytesperline for each plane. */ bytesperline = bpl; - pix->plane_fmt[i].bytesperline = bytesperline; - *sizeimage = (pix->width * pix->height * fmt->depth[i]) / 8; + plane_fmt->bytesperline = bytesperline; + plane_fmt->sizeimage = max((pix->width * pix->height * + fmt->depth[i]) / 8, plane_fmt->sizeimage); } } diff --git a/drivers/media/video/s5p-fimc/fimc-lite.c b/drivers/media/video/s5p-fimc/fimc-lite.c index 400d701aef04..74ff310db30c 100644 --- a/drivers/media/video/s5p-fimc/fimc-lite.c +++ b/drivers/media/video/s5p-fimc/fimc-lite.c @@ -451,34 +451,44 @@ static void fimc_lite_clear_event_counters(struct fimc_lite *fimc) static int fimc_lite_open(struct file *file) { struct fimc_lite *fimc = video_drvdata(file); - int ret = v4l2_fh_open(file); + int ret; - if (ret) - return ret; + if (mutex_lock_interruptible(&fimc->lock)) + return -ERESTARTSYS; set_bit(ST_FLITE_IN_USE, &fimc->state); - pm_runtime_get_sync(&fimc->pdev->dev); + ret = pm_runtime_get_sync(&fimc->pdev->dev); + if (ret < 0) + goto done; - if (++fimc->ref_count != 1 || fimc->out_path != FIMC_IO_DMA) - return ret; + ret = v4l2_fh_open(file); + if (ret < 0) + goto done; - ret = fimc_pipeline_initialize(&fimc->pipeline, &fimc->vfd->entity, - true); - if (ret < 0) { - v4l2_err(fimc->vfd, "Video pipeline initialization failed\n"); - pm_runtime_put_sync(&fimc->pdev->dev); - fimc->ref_count--; - v4l2_fh_release(file); - clear_bit(ST_FLITE_IN_USE, &fimc->state); + if (++fimc->ref_count == 1 && fimc->out_path == FIMC_IO_DMA) { + ret = fimc_pipeline_initialize(&fimc->pipeline, + &fimc->vfd->entity, true); + if (ret < 0) { + pm_runtime_put_sync(&fimc->pdev->dev); + fimc->ref_count--; + v4l2_fh_release(file); + clear_bit(ST_FLITE_IN_USE, &fimc->state); + } + + fimc_lite_clear_event_counters(fimc); } - - fimc_lite_clear_event_counters(fimc); +done: + mutex_unlock(&fimc->lock); return ret; } static int fimc_lite_close(struct file *file) { struct fimc_lite *fimc = video_drvdata(file); + int ret; + + if (mutex_lock_interruptible(&fimc->lock)) + return -ERESTARTSYS; if (--fimc->ref_count == 0 && fimc->out_path == FIMC_IO_DMA) { clear_bit(ST_FLITE_IN_USE, &fimc->state); @@ -492,20 +502,39 @@ static int fimc_lite_close(struct file *file) if (fimc->ref_count == 0) vb2_queue_release(&fimc->vb_queue); - return v4l2_fh_release(file); + ret = v4l2_fh_release(file); + + mutex_unlock(&fimc->lock); + return ret; } static unsigned int fimc_lite_poll(struct file *file, struct poll_table_struct *wait) { struct fimc_lite *fimc = video_drvdata(file); - return vb2_poll(&fimc->vb_queue, file, wait); + int ret; + + if (mutex_lock_interruptible(&fimc->lock)) + return POLL_ERR; + + ret = vb2_poll(&fimc->vb_queue, file, wait); + mutex_unlock(&fimc->lock); + + return ret; } static int fimc_lite_mmap(struct file *file, struct vm_area_struct *vma) { struct fimc_lite *fimc = video_drvdata(file); - return vb2_mmap(&fimc->vb_queue, vma); + int ret; + + if (mutex_lock_interruptible(&fimc->lock)) + return -ERESTARTSYS; + + ret = vb2_mmap(&fimc->vb_queue, vma); + mutex_unlock(&fimc->lock); + + return ret; } static const struct v4l2_file_operations fimc_lite_fops = { @@ -762,7 +791,9 @@ static int fimc_lite_streamon(struct file *file, void *priv, if (fimc_lite_active(fimc)) return -EBUSY; - media_entity_pipeline_start(&sensor->entity, p->m_pipeline); + ret = media_entity_pipeline_start(&sensor->entity, p->m_pipeline); + if (ret < 0) + return ret; ret = fimc_pipeline_validate(fimc); if (ret) { @@ -1508,7 +1539,7 @@ static int fimc_lite_suspend(struct device *dev) return 0; ret = fimc_lite_stop_capture(fimc, suspend); - if (ret) + if (ret < 0 || !fimc_lite_active(fimc)) return ret; return fimc_pipeline_shutdown(&fimc->pipeline); diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.c b/drivers/media/video/s5p-fimc/fimc-mdevice.c index 6753c45631b8..52cef4865423 100644 --- a/drivers/media/video/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/video/s5p-fimc/fimc-mdevice.c @@ -193,9 +193,13 @@ int __fimc_pipeline_shutdown(struct fimc_pipeline *p) int fimc_pipeline_shutdown(struct fimc_pipeline *p) { - struct media_entity *me = &p->subdevs[IDX_SENSOR]->entity; + struct media_entity *me; int ret; + if (!p || !p->subdevs[IDX_SENSOR]) + return -EINVAL; + + me = &p->subdevs[IDX_SENSOR]->entity; mutex_lock(&me->parent->graph_mutex); ret = __fimc_pipeline_shutdown(p); mutex_unlock(&me->parent->graph_mutex); @@ -498,12 +502,12 @@ static void fimc_md_unregister_entities(struct fimc_md *fmd) * @source: the source entity to create links to all fimc entities from * @sensor: sensor subdev linked to FIMC[fimc_id] entity, may be null * @pad: the source entity pad index - * @fimc_id: index of the fimc device for which link should be enabled + * @link_mask: bitmask of the fimc devices for which link should be enabled */ static int __fimc_md_create_fimc_sink_links(struct fimc_md *fmd, struct media_entity *source, struct v4l2_subdev *sensor, - int pad, int fimc_id) + int pad, int link_mask) { struct fimc_sensor_info *s_info; struct media_entity *sink; @@ -520,7 +524,7 @@ static int __fimc_md_create_fimc_sink_links(struct fimc_md *fmd, if (!fmd->fimc[i]->variant->has_cam_if) continue; - flags = (i == fimc_id) ? MEDIA_LNK_FL_ENABLED : 0; + flags = ((1 << i) & link_mask) ? MEDIA_LNK_FL_ENABLED : 0; sink = &fmd->fimc[i]->vid_cap.subdev.entity; ret = media_entity_create_link(source, pad, sink, @@ -552,7 +556,10 @@ static int __fimc_md_create_fimc_sink_links(struct fimc_md *fmd, if (!fmd->fimc_lite[i]) continue; - flags = (i == fimc_id) ? MEDIA_LNK_FL_ENABLED : 0; + if (link_mask & (1 << (i + FIMC_MAX_DEVS))) + flags = MEDIA_LNK_FL_ENABLED; + else + flags = 0; sink = &fmd->fimc_lite[i]->subdev.entity; ret = media_entity_create_link(source, pad, sink, @@ -614,9 +621,8 @@ static int fimc_md_create_links(struct fimc_md *fmd) struct s5p_fimc_isp_info *pdata; struct fimc_sensor_info *s_info; struct media_entity *source, *sink; - int i, pad, fimc_id = 0; - int ret = 0; - u32 flags; + int i, pad, fimc_id = 0, ret = 0; + u32 flags, link_mask = 0; for (i = 0; i < fmd->num_sensors; i++) { if (fmd->sensor[i].subdev == NULL) @@ -668,19 +674,20 @@ static int fimc_md_create_links(struct fimc_md *fmd) if (source == NULL) continue; + link_mask = 1 << fimc_id++; ret = __fimc_md_create_fimc_sink_links(fmd, source, sensor, - pad, fimc_id++); + pad, link_mask); } - fimc_id = 0; for (i = 0; i < ARRAY_SIZE(fmd->csis); i++) { if (fmd->csis[i].sd == NULL) continue; source = &fmd->csis[i].sd->entity; pad = CSIS_PAD_SOURCE; + link_mask = 1 << fimc_id++; ret = __fimc_md_create_fimc_sink_links(fmd, source, NULL, - pad, fimc_id++); + pad, link_mask); } /* Create immutable links between each FIMC's subdev and video node */ @@ -734,8 +741,8 @@ static void fimc_md_put_clocks(struct fimc_md *fmd) } static int __fimc_md_set_camclk(struct fimc_md *fmd, - struct fimc_sensor_info *s_info, - bool on) + struct fimc_sensor_info *s_info, + bool on) { struct s5p_fimc_isp_info *pdata = s_info->pdata; struct fimc_camclk_info *camclk; @@ -744,12 +751,10 @@ static int __fimc_md_set_camclk(struct fimc_md *fmd, if (WARN_ON(pdata->clk_id >= FIMC_MAX_CAMCLKS) || fmd == NULL) return -EINVAL; - if (s_info->clk_on == on) - return 0; camclk = &fmd->camclk[pdata->clk_id]; - dbg("camclk %d, f: %lu, clk: %p, on: %d", - pdata->clk_id, pdata->clk_frequency, camclk, on); + dbg("camclk %d, f: %lu, use_count: %d, on: %d", + pdata->clk_id, pdata->clk_frequency, camclk->use_count, on); if (on) { if (camclk->use_count > 0 && @@ -760,11 +765,9 @@ static int __fimc_md_set_camclk(struct fimc_md *fmd, clk_set_rate(camclk->clock, pdata->clk_frequency); camclk->frequency = pdata->clk_frequency; ret = clk_enable(camclk->clock); + dbg("Enabled camclk %d: f: %lu", pdata->clk_id, + clk_get_rate(camclk->clock)); } - s_info->clk_on = 1; - dbg("Enabled camclk %d: f: %lu", pdata->clk_id, - clk_get_rate(camclk->clock)); - return ret; } @@ -773,7 +776,6 @@ static int __fimc_md_set_camclk(struct fimc_md *fmd, if (--camclk->use_count == 0) { clk_disable(camclk->clock); - s_info->clk_on = 0; dbg("Disabled camclk %d", pdata->clk_id); } return ret; @@ -789,8 +791,6 @@ static int __fimc_md_set_camclk(struct fimc_md *fmd, * devices to which sensors can be attached, either directly or through * the MIPI CSI receiver. The clock is allowed here to be used by * multiple sensors concurrently if they use same frequency. - * The per sensor subdev clk_on attribute helps to synchronize accesses - * to the sclk_cam clocks from the video and media device nodes. * This function should only be called when the graph mutex is held. */ int fimc_md_set_camclk(struct v4l2_subdev *sd, bool on) diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.h b/drivers/media/video/s5p-fimc/fimc-mdevice.h index 3b8a3492a176..1f5dbaff5442 100644 --- a/drivers/media/video/s5p-fimc/fimc-mdevice.h +++ b/drivers/media/video/s5p-fimc/fimc-mdevice.h @@ -47,7 +47,6 @@ struct fimc_camclk_info { * @pdata: sensor's atrributes passed as media device's platform data * @subdev: image sensor v4l2 subdev * @host: fimc device the sensor is currently linked to - * @clk_on: sclk_cam clock's state associated with this subdev * * This data structure applies to image sensor and the writeback subdevs. */ @@ -55,7 +54,6 @@ struct fimc_sensor_info { struct s5p_fimc_isp_info *pdata; struct v4l2_subdev *subdev; struct fimc_dev *host; - bool clk_on; }; /** diff --git a/drivers/media/video/s5p-mfc/regs-mfc.h b/drivers/media/video/s5p-mfc/regs-mfc.h index 053a8a872fd7..a19bece41ba9 100644 --- a/drivers/media/video/s5p-mfc/regs-mfc.h +++ b/drivers/media/video/s5p-mfc/regs-mfc.h @@ -164,10 +164,15 @@ decoded pic */ #define S5P_FIMV_SI_DISPLAY_Y_ADR 0x2010 /* luma addr of displayed pic */ #define S5P_FIMV_SI_DISPLAY_C_ADR 0x2014 /* chroma addrof displayed pic */ + #define S5P_FIMV_SI_CONSUMED_BYTES 0x2018 /* Consumed number of bytes to decode a frame */ #define S5P_FIMV_SI_DISPLAY_STATUS 0x201c /* status of decoded picture */ +#define S5P_FIMV_SI_DECODE_Y_ADR 0x2024 /* luma addr of decoded pic */ +#define S5P_FIMV_SI_DECODE_C_ADR 0x2028 /* chroma addrof decoded pic */ +#define S5P_FIMV_SI_DECODE_STATUS 0x202c /* status of decoded picture */ + #define S5P_FIMV_SI_CH0_SB_ST_ADR 0x2044 /* start addr of stream buf */ #define S5P_FIMV_SI_CH0_SB_FRM_SIZE 0x2048 /* size of stream buf */ #define S5P_FIMV_SI_CH0_DESC_ADR 0x204c /* addr of descriptor buf */ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c index c25ec022d267..feea867f318c 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c +++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c @@ -627,13 +627,13 @@ static int s5p_mfc_dec_s_ctrl(struct v4l2_ctrl *ctrl) switch (ctrl->id) { case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY: - ctx->loop_filter_mpeg4 = ctrl->val; + ctx->display_delay = ctrl->val; break; case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE: ctx->display_delay_enable = ctrl->val; break; case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER: - ctx->display_delay = ctrl->val; + ctx->loop_filter_mpeg4 = ctrl->val; break; case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE: ctx->slice_interface = ctrl->val; @@ -996,6 +996,7 @@ int s5p_mfc_dec_ctrls_setup(struct s5p_mfc_ctx *ctx) for (i = 0; i < NUM_CTRLS; i++) { if (IS_MFC51_PRIV(controls[i].id)) { + memset(&cfg, 0, sizeof(struct v4l2_ctrl_config)); cfg.ops = &s5p_mfc_dec_ctrl_ops; cfg.id = controls[i].id; cfg.min = controls[i].minimum; diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c index acedb2004be3..158b78989b89 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c @@ -243,12 +243,6 @@ static struct mfc_control controls[] = { .minimum = V4L2_MPEG_VIDEO_H264_LEVEL_1_0, .maximum = V4L2_MPEG_VIDEO_H264_LEVEL_4_0, .default_value = V4L2_MPEG_VIDEO_H264_LEVEL_1_0, - .menu_skip_mask = ~( - (1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_1) | - (1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_2) | - (1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_0) | - (1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_1) - ), }, { .id = V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL, @@ -494,7 +488,7 @@ static struct mfc_control controls[] = { .type = V4L2_CTRL_TYPE_MENU, .minimum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED, .maximum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED, - .default_value = 0, + .default_value = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED, .menu_skip_mask = 0, }, { @@ -534,7 +528,7 @@ static struct mfc_control controls[] = { .type = V4L2_CTRL_TYPE_MENU, .minimum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE, .maximum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE, - .default_value = 0, + .default_value = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE, .menu_skip_mask = 0, }, { @@ -907,6 +901,8 @@ static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f) mfc_err("failed to try output format\n"); return -EINVAL; } + v4l_bound_align_image(&pix_fmt_mp->width, 8, 1920, 1, + &pix_fmt_mp->height, 4, 1080, 1, 0); } else { mfc_err("invalid buf type\n"); return -EINVAL; @@ -1777,6 +1773,7 @@ int s5p_mfc_enc_ctrls_setup(struct s5p_mfc_ctx *ctx) } for (i = 0; i < NUM_CTRLS; i++) { if (IS_MFC51_PRIV(controls[i].id)) { + memset(&cfg, 0, sizeof(struct v4l2_ctrl_config)); cfg.ops = &s5p_mfc_enc_ctrl_ops; cfg.id = controls[i].id; cfg.min = controls[i].minimum; diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_opr.h b/drivers/media/video/s5p-mfc/s5p_mfc_opr.h index db83836e6a9f..5932d1c782c5 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_opr.h +++ b/drivers/media/video/s5p-mfc/s5p_mfc_opr.h @@ -57,10 +57,12 @@ void s5p_mfc_cleanup_queue(struct list_head *lh, struct vb2_queue *vq); S5P_FIMV_SI_DISPLAY_Y_ADR) << \ MFC_OFFSET_SHIFT) #define s5p_mfc_get_dec_y_adr() (readl(dev->regs_base + \ - S5P_FIMV_SI_DISPLAY_Y_ADR) << \ + S5P_FIMV_SI_DECODE_Y_ADR) << \ MFC_OFFSET_SHIFT) #define s5p_mfc_get_dspl_status() readl(dev->regs_base + \ S5P_FIMV_SI_DISPLAY_STATUS) +#define s5p_mfc_get_dec_status() readl(dev->regs_base + \ + S5P_FIMV_SI_DECODE_STATUS) #define s5p_mfc_get_frame_type() (readl(dev->regs_base + \ S5P_FIMV_DECODE_FRAME_TYPE) \ & S5P_FIMV_DECODE_FRAME_MASK) diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_shm.h b/drivers/media/video/s5p-mfc/s5p_mfc_shm.h index 764eac6bcc4c..cf962a466276 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_shm.h +++ b/drivers/media/video/s5p-mfc/s5p_mfc_shm.h @@ -13,8 +13,7 @@ #ifndef S5P_MFC_SHM_H_ #define S5P_MFC_SHM_H_ -enum MFC_SHM_OFS -{ +enum MFC_SHM_OFS { EXTENEDED_DECODE_STATUS = 0x00, /* D */ SET_FRAME_TAG = 0x04, /* D */ GET_FRAME_TAG_TOP = 0x08, /* D */ diff --git a/drivers/media/video/smiapp/Kconfig b/drivers/media/video/smiapp/Kconfig index f7b35ff443bf..fb99ff18be07 100644 --- a/drivers/media/video/smiapp/Kconfig +++ b/drivers/media/video/smiapp/Kconfig @@ -1,6 +1,6 @@ config VIDEO_SMIAPP tristate "SMIA++/SMIA sensor support" - depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAVE_CLK select VIDEO_SMIAPP_PLL ---help--- This is a generic driver for SMIA++/SMIA camera modules. diff --git a/drivers/media/video/smiapp/smiapp-core.c b/drivers/media/video/smiapp/smiapp-core.c index f518026cb67b..9cf5bda35fbe 100644 --- a/drivers/media/video/smiapp/smiapp-core.c +++ b/drivers/media/video/smiapp/smiapp-core.c @@ -31,7 +31,9 @@ #include #include #include +#include #include +#include #include #include diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 3e050e12153b..1ad5ab6ce5cf 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -1178,7 +1178,7 @@ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) return 0; if (vt->type == t->mode && analog_ops->get_afc) vt->afc = analog_ops->get_afc(&t->fe); - if (t->mode != V4L2_TUNER_RADIO) { + if (vt->type != V4L2_TUNER_RADIO) { vt->capability |= V4L2_TUNER_CAP_NORM; vt->rangelow = tv_range[0] * 16; vt->rangehigh = tv_range[1] * 16; diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 5ccbd4629f9c..0cbada18f6f5 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -656,7 +656,7 @@ static void determine_valid_ioctls(struct video_device *vdev) SET_VALID_IOCTL(ops, VIDIOC_TRY_ENCODER_CMD, vidioc_try_encoder_cmd); SET_VALID_IOCTL(ops, VIDIOC_DECODER_CMD, vidioc_decoder_cmd); SET_VALID_IOCTL(ops, VIDIOC_TRY_DECODER_CMD, vidioc_try_decoder_cmd); - if (ops->vidioc_g_parm || vdev->current_norm) + if (ops->vidioc_g_parm || vdev->vfl_type == VFL_TYPE_GRABBER) set_bit(_IOC_NR(VIDIOC_G_PARM), valid_ioctls); SET_VALID_IOCTL(ops, VIDIOC_S_PARM, vidioc_s_parm); SET_VALID_IOCTL(ops, VIDIOC_G_TUNER, vidioc_g_tuner); @@ -679,6 +679,9 @@ static void determine_valid_ioctls(struct video_device *vdev) SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_PRESET, vidioc_query_dv_preset); SET_VALID_IOCTL(ops, VIDIOC_S_DV_TIMINGS, vidioc_s_dv_timings); SET_VALID_IOCTL(ops, VIDIOC_G_DV_TIMINGS, vidioc_g_dv_timings); + SET_VALID_IOCTL(ops, VIDIOC_ENUM_DV_TIMINGS, vidioc_enum_dv_timings); + SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_TIMINGS, vidioc_query_dv_timings); + SET_VALID_IOCTL(ops, VIDIOC_DV_TIMINGS_CAP, vidioc_dv_timings_cap); /* yes, really vidioc_subscribe_event */ SET_VALID_IOCTL(ops, VIDIOC_DQEVENT, vidioc_subscribe_event); SET_VALID_IOCTL(ops, VIDIOC_SUBSCRIBE_EVENT, vidioc_subscribe_event); diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 91be4e871f43..d7fa8962d8b3 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -1680,6 +1680,7 @@ static long __video_do_ioctl(struct file *file, break; ret = 0; + p->parm.capture.readbuffers = 2; if (ops->vidioc_g_std) ret = ops->vidioc_g_std(file, fh, &std); if (ret == 0) diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c index 4d7391ec8001..aae1720b2f2d 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/video/vino.c @@ -2561,7 +2561,7 @@ static int vino_acquire_input(struct vino_channel_settings *vcs) } else if (vino_drvdata->decoder && (vino_drvdata->decoder_owner == VINO_NO_CHANNEL)) { int input; - int data_norm; + int data_norm = 0; v4l2_std_id norm; input = VINO_INPUT_COMPOSITE; @@ -2651,7 +2651,7 @@ static int vino_set_input(struct vino_channel_settings *vcs, int input) } if (vino_drvdata->decoder_owner == vcs->channel) { - int data_norm; + int data_norm = 0; v4l2_std_id norm; ret = decoder_call(video, s_routing, diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 0960d7f0d394..08c10240e70f 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -1149,10 +1149,14 @@ static ssize_t vivi_read(struct file *file, char __user *data, size_t count, loff_t *ppos) { struct vivi_dev *dev = video_drvdata(file); + int err; dprintk(dev, 1, "read called\n"); - return vb2_read(&dev->vb_vidq, data, count, ppos, + mutex_lock(&dev->mutex); + err = vb2_read(&dev->vb_vidq, data, count, ppos, file->f_flags & O_NONBLOCK); + mutex_unlock(&dev->mutex); + return err; } static unsigned int diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index e129c820df7d..92144ed1ad46 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -286,6 +286,7 @@ config TWL6040_CORE depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE select REGMAP_I2C + select IRQ_DOMAIN default n help Say yes here if you want support for Texas Instruments TWL6040 audio diff --git a/drivers/mfd/ab5500-core.h b/drivers/mfd/ab5500-core.h deleted file mode 100644 index 63b30b17e4f3..000000000000 --- a/drivers/mfd/ab5500-core.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright (C) 2011 ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * Shared definitions and data structures for the AB5500 MFD driver - */ - -/* Read/write operation values. */ -#define AB5500_PERM_RD (0x01) -#define AB5500_PERM_WR (0x02) - -/* Read/write permissions. */ -#define AB5500_PERM_RO (AB5500_PERM_RD) -#define AB5500_PERM_RW (AB5500_PERM_RD | AB5500_PERM_WR) - -#define AB5500_MASK_BASE (0x60) -#define AB5500_MASK_END (0x79) -#define AB5500_CHIP_ID (0x20) - -/** - * struct ab5500_reg_range - * @first: the first address of the range - * @last: the last address of the range - * @perm: access permissions for the range - */ -struct ab5500_reg_range { - u8 first; - u8 last; - u8 perm; -}; - -/** - * struct ab5500_i2c_ranges - * @count: the number of ranges in the list - * @range: the list of register ranges - */ -struct ab5500_i2c_ranges { - u8 nranges; - u8 bankid; - const struct ab5500_reg_range *range; -}; - -/** - * struct ab5500_i2c_banks - * @count: the number of ranges in the list - * @range: the list of register ranges - */ -struct ab5500_i2c_banks { - u8 nbanks; - const struct ab5500_i2c_ranges *bank; -}; - -/** - * struct ab5500_bank - * @slave_addr: I2C slave_addr found in AB5500 specification - * @name: Documentation name of the bank. For reference - */ -struct ab5500_bank { - u8 slave_addr; - const char *name; -}; - -static const struct ab5500_bank bankinfo[AB5500_NUM_BANKS] = { - [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = { - AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP, "VIT_IO_I2C_CLK_TST_OTP"}, - [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = { - AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST, "VDDDIG_IO_I2C_CLK_TST"}, - [AB5500_BANK_VDENC] = {AB5500_ADDR_VDENC, "VDENC"}, - [AB5500_BANK_SIM_USBSIM] = {AB5500_ADDR_SIM_USBSIM, "SIM_USBSIM"}, - [AB5500_BANK_LED] = {AB5500_ADDR_LED, "LED"}, - [AB5500_BANK_ADC] = {AB5500_ADDR_ADC, "ADC"}, - [AB5500_BANK_RTC] = {AB5500_ADDR_RTC, "RTC"}, - [AB5500_BANK_STARTUP] = {AB5500_ADDR_STARTUP, "STARTUP"}, - [AB5500_BANK_DBI_ECI] = {AB5500_ADDR_DBI_ECI, "DBI-ECI"}, - [AB5500_BANK_CHG] = {AB5500_ADDR_CHG, "CHG"}, - [AB5500_BANK_FG_BATTCOM_ACC] = { - AB5500_ADDR_FG_BATTCOM_ACC, "FG_BATCOM_ACC"}, - [AB5500_BANK_USB] = {AB5500_ADDR_USB, "USB"}, - [AB5500_BANK_IT] = {AB5500_ADDR_IT, "IT"}, - [AB5500_BANK_VIBRA] = {AB5500_ADDR_VIBRA, "VIBRA"}, - [AB5500_BANK_AUDIO_HEADSETUSB] = { - AB5500_ADDR_AUDIO_HEADSETUSB, "AUDIO_HEADSETUSB"}, -}; - -int ab5500_get_register_interruptible_raw(struct ab5500 *ab, u8 bank, u8 reg, - u8 *value); -int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank, - u8 reg, u8 bitmask, u8 bitvalues); diff --git a/drivers/mfd/mc13xxx-spi.c b/drivers/mfd/mc13xxx-spi.c index 3fcdab3eb8eb..03df422feb76 100644 --- a/drivers/mfd/mc13xxx-spi.c +++ b/drivers/mfd/mc13xxx-spi.c @@ -49,10 +49,72 @@ static struct regmap_config mc13xxx_regmap_spi_config = { .reg_bits = 7, .pad_bits = 1, .val_bits = 24, + .write_flag_mask = 0x80, .max_register = MC13XXX_NUMREGS, .cache_type = REGCACHE_NONE, + .use_single_rw = 1, +}; + +static int mc13xxx_spi_read(void *context, const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + unsigned char w[4] = { *((unsigned char *) reg), 0, 0, 0}; + unsigned char r[4]; + unsigned char *p = val; + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + struct spi_transfer t = { + .tx_buf = w, + .rx_buf = r, + .len = 4, + }; + + struct spi_message m; + int ret; + + if (val_size != 3 || reg_size != 1) + return -ENOTSUPP; + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + ret = spi_sync(spi, &m); + + memcpy(p, &r[1], 3); + + return ret; +} + +static int mc13xxx_spi_write(void *context, const void *data, size_t count) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + + if (count != 4) + return -ENOTSUPP; + + return spi_write(spi, data, count); +} + +/* + * We cannot use regmap-spi generic bus implementation here. + * The MC13783 chip will get corrupted if CS signal is deasserted + * and on i.Mx31 SoC (the target SoC for MC13783 PMIC) the SPI controller + * has the following errata (DSPhl22960): + * "The CSPI negates SS when the FIFO becomes empty with + * SSCTL= 0. Software cannot guarantee that the FIFO will not + * drain because of higher priority interrupts and the + * non-realtime characteristics of the operating system. As a + * result, the SS will negate before all of the data has been + * transferred to/from the peripheral." + * We workaround this by accessing the SPI controller with a + * single transfert. + */ + +static struct regmap_bus regmap_mc13xxx_bus = { + .write = mc13xxx_spi_write, + .read = mc13xxx_spi_read, }; static int mc13xxx_spi_probe(struct spi_device *spi) @@ -73,12 +135,13 @@ static int mc13xxx_spi_probe(struct spi_device *spi) dev_set_drvdata(&spi->dev, mc13xxx); spi->mode = SPI_MODE_0 | SPI_CS_HIGH; - spi->bits_per_word = 32; mc13xxx->dev = &spi->dev; mutex_init(&mc13xxx->lock); - mc13xxx->regmap = regmap_init_spi(spi, &mc13xxx_regmap_spi_config); + mc13xxx->regmap = regmap_init(&spi->dev, ®map_mc13xxx_bus, &spi->dev, + &mc13xxx_regmap_spi_config); + if (IS_ERR(mc13xxx->regmap)) { ret = PTR_ERR(mc13xxx->regmap); dev_err(mc13xxx->dev, "Failed to initialize register map: %d\n", diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 7e96bb229724..41088ecbb2a9 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -500,8 +501,21 @@ static void omap_usbhs_init(struct device *dev) dev_dbg(dev, "starting TI HSUSB Controller\n"); pm_runtime_get_sync(dev); - spin_lock_irqsave(&omap->lock, flags); + if (pdata->ehci_data->phy_reset) { + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) + gpio_request_one(pdata->ehci_data->reset_gpio_port[0], + GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); + + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) + gpio_request_one(pdata->ehci_data->reset_gpio_port[1], + GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); + + /* Hold the PHY in RESET for enough time till DIR is high */ + udelay(10); + } + + spin_lock_irqsave(&omap->lock, flags); omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); @@ -581,9 +595,39 @@ static void omap_usbhs_init(struct device *dev) } spin_unlock_irqrestore(&omap->lock, flags); + + if (pdata->ehci_data->phy_reset) { + /* Hold the PHY in RESET for enough time till + * PHY is settled and ready + */ + udelay(10); + + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) + gpio_set_value_cansleep + (pdata->ehci_data->reset_gpio_port[0], 1); + + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) + gpio_set_value_cansleep + (pdata->ehci_data->reset_gpio_port[1], 1); + } + pm_runtime_put_sync(dev); } +static void omap_usbhs_deinit(struct device *dev) +{ + struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); + struct usbhs_omap_platform_data *pdata = &omap->platdata; + + if (pdata->ehci_data->phy_reset) { + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) + gpio_free(pdata->ehci_data->reset_gpio_port[0]); + + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) + gpio_free(pdata->ehci_data->reset_gpio_port[1]); + } +} + /** * usbhs_omap_probe - initialize TI-based HCDs @@ -767,6 +811,7 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev) goto end_probe; err_alloc: + omap_usbhs_deinit(&pdev->dev); iounmap(omap->tll_base); err_tll: @@ -818,6 +863,7 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev) { struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev); + omap_usbhs_deinit(&pdev->dev); iounmap(omap->tll_base); iounmap(omap->uhh_base); clk_put(omap->init_60m_fclk); diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c index 00c0aba7eba0..c4a69f193a1d 100644 --- a/drivers/mfd/palmas.c +++ b/drivers/mfd/palmas.c @@ -356,7 +356,14 @@ static int __devinit palmas_i2c_probe(struct i2c_client *i2c, } } - ret = regmap_add_irq_chip(palmas->regmap[1], palmas->irq, + /* Change IRQ into clear on read mode for efficiency */ + slave = PALMAS_BASE_TO_SLAVE(PALMAS_INTERRUPT_BASE); + addr = PALMAS_BASE_TO_REG(PALMAS_INTERRUPT_BASE, PALMAS_INT_CTRL); + reg = PALMAS_INT_CTRL_INT_CLEAR; + + regmap_write(palmas->regmap[slave], addr, reg); + + ret = regmap_add_irq_chip(palmas->regmap[slave], palmas->irq, IRQF_ONESHOT | IRQF_TRIGGER_LOW, -1, &palmas_irq_chip, &palmas->irq_data); if (ret < 0) @@ -441,6 +448,9 @@ static int __devinit palmas_i2c_probe(struct i2c_client *i2c, goto err; } + children[PALMAS_PMIC_ID].platform_data = pdata->pmic_pdata; + children[PALMAS_PMIC_ID].pdata_size = sizeof(*pdata->pmic_pdata); + ret = mfd_add_devices(palmas->dev, -1, children, ARRAY_SIZE(palmas_children), NULL, regmap_irq_chip_get_base(palmas->irq_data)); @@ -472,6 +482,7 @@ static const struct i2c_device_id palmas_i2c_id[] = { { "twl6035", }, { "twl6037", }, { "tps65913", }, + { /* end */ } }; MODULE_DEVICE_TABLE(i2c, palmas_i2c_id); diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c index 373f423b1181..947a06a1845f 100644 --- a/drivers/mfd/stmpe-i2c.c +++ b/drivers/mfd/stmpe-i2c.c @@ -6,7 +6,7 @@ * * License Terms: GNU General Public License, version 2 * Author: Rabin Vincent for ST-Ericsson - * Author: Viresh Kumar for ST Microelectronics + * Author: Viresh Kumar for ST Microelectronics */ #include diff --git a/drivers/mfd/stmpe-spi.c b/drivers/mfd/stmpe-spi.c index afd459013ecb..9edfe864cc05 100644 --- a/drivers/mfd/stmpe-spi.c +++ b/drivers/mfd/stmpe-spi.c @@ -4,7 +4,7 @@ * Copyright (C) ST Microelectronics SA 2011 * * License Terms: GNU General Public License, version 2 - * Author: Viresh Kumar for ST Microelectronics + * Author: Viresh Kumar for ST Microelectronics */ #include @@ -146,4 +146,4 @@ module_exit(stmpe_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("STMPE MFD SPI Interface Driver"); -MODULE_AUTHOR("Viresh Kumar "); +MODULE_AUTHOR("Viresh Kumar "); diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c index 93936f1b75eb..23f5463d4cae 100644 --- a/drivers/misc/mei/interrupt.c +++ b/drivers/misc/mei/interrupt.c @@ -835,7 +835,7 @@ static int _mei_irq_thread_read(struct mei_device *dev, s32 *slots, struct mei_cl *cl, struct mei_io_list *cmpl_list) { - if ((*slots * sizeof(u32)) >= (sizeof(struct mei_msg_hdr) + + if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) + sizeof(struct hbm_flow_control))) { /* return the cancel routine */ list_del(&cb_pos->cb_list); diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index c70333228337..783fcd7365bc 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -982,7 +982,7 @@ static int __devinit mei_probe(struct pci_dev *pdev, err = request_threaded_irq(pdev->irq, NULL, mei_interrupt_thread_handler, - 0, mei_driver_name, dev); + IRQF_ONESHOT, mei_driver_name, dev); else err = request_threaded_irq(pdev->irq, mei_interrupt_quick_handler, @@ -992,7 +992,7 @@ static int __devinit mei_probe(struct pci_dev *pdev, if (err) { dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n", pdev->irq); - goto unmap_memory; + goto disable_msi; } INIT_DELAYED_WORK(&dev->timer_work, mei_timer); if (mei_hw_init(dev)) { @@ -1023,8 +1023,8 @@ release_irq: mei_disable_interrupts(dev); flush_scheduled_work(); free_irq(pdev->irq, dev); +disable_msi: pci_disable_msi(pdev); -unmap_memory: pci_iounmap(pdev, dev->mem_addr); free_device: kfree(dev); @@ -1101,6 +1101,8 @@ static void __devexit mei_remove(struct pci_dev *pdev) pci_release_regions(pdev); pci_disable_device(pdev); + + misc_deregister(&mei_misc_device); } #ifdef CONFIG_PM static int mei_pci_suspend(struct device *device) @@ -1145,7 +1147,7 @@ static int mei_pci_resume(struct device *device) err = request_threaded_irq(pdev->irq, NULL, mei_interrupt_thread_handler, - 0, mei_driver_name, dev); + IRQF_ONESHOT, mei_driver_name, dev); else err = request_threaded_irq(pdev->irq, mei_interrupt_quick_handler, @@ -1216,7 +1218,6 @@ module_init(mei_init_module); */ static void __exit mei_exit_module(void) { - misc_deregister(&mei_misc_device); pci_unregister_driver(&mei_driver); pr_debug("unloaded successfully.\n"); diff --git a/drivers/misc/mei/wd.c b/drivers/misc/mei/wd.c index 6be5605707b4..e2ec0505eb5c 100644 --- a/drivers/misc/mei/wd.c +++ b/drivers/misc/mei/wd.c @@ -341,7 +341,7 @@ static const struct watchdog_ops wd_ops = { }; static const struct watchdog_info wd_info = { .identity = INTEL_AMT_WATCHDOG_ID, - .options = WDIOF_KEEPALIVEPING, + .options = WDIOF_KEEPALIVEPING | WDIOF_ALARMONLY, }; static struct watchdog_device amt_wd_dev = { diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 17bbacb1b4b1..87b251ab6ec5 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -452,9 +452,9 @@ xpc_handle_activate_mq_msg_uv(struct xpc_partition *part, if (msg->activate_gru_mq_desc_gpa != part_uv->activate_gru_mq_desc_gpa) { - spin_lock_irqsave(&part_uv->flags_lock, irq_flags); + spin_lock(&part_uv->flags_lock); part_uv->flags &= ~XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV; - spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); + spin_unlock(&part_uv->flags_lock); part_uv->activate_gru_mq_desc_gpa = msg->activate_gru_mq_desc_gpa; } diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index dd2d374dcc7a..276d21ce6bc1 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -554,7 +554,6 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) struct mmc_request mrq = {NULL}; struct mmc_command cmd = {0}; struct mmc_data data = {0}; - unsigned int timeout_us; struct scatterlist sg; @@ -574,23 +573,12 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) cmd.arg = 0; cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; - data.timeout_ns = card->csd.tacc_ns * 100; - data.timeout_clks = card->csd.tacc_clks * 100; - - timeout_us = data.timeout_ns / 1000; - timeout_us += data.timeout_clks * 1000 / - (card->host->ios.clock / 1000); - - if (timeout_us > 100000) { - data.timeout_ns = 100000000; - data.timeout_clks = 0; - } - data.blksz = 4; data.blocks = 1; data.flags = MMC_DATA_READ; data.sg = &sg; data.sg_len = 1; + mmc_set_data_timeout(&data, card); mrq.cmd = &cmd; mrq.data = &data; diff --git a/drivers/mmc/core/cd-gpio.c b/drivers/mmc/core/cd-gpio.c index f13e38deceac..8f5dc08d6598 100644 --- a/drivers/mmc/core/cd-gpio.c +++ b/drivers/mmc/core/cd-gpio.c @@ -50,8 +50,8 @@ int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio) goto egpioreq; ret = request_threaded_irq(irq, NULL, mmc_cd_gpio_irqt, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - cd->label, host); + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, cd->label, host); if (ret < 0) goto eirqreq; diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 2d4a4b746750..4f4489aa6bae 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -717,10 +717,6 @@ static int mmc_select_powerclass(struct mmc_card *card, card->ext_csd.generic_cmd6_time); } - if (err) - pr_err("%s: power class selection for ext_csd_bus_width %d" - " failed\n", mmc_hostname(card->host), bus_width); - return err; } @@ -1104,7 +1100,9 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4; err = mmc_select_powerclass(card, ext_csd_bits, ext_csd); if (err) - goto err; + pr_warning("%s: power class selection to bus width %d" + " failed\n", mmc_hostname(card->host), + 1 << bus_width); } /* @@ -1136,7 +1134,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, err = mmc_select_powerclass(card, ext_csd_bits[idx][0], ext_csd); if (err) - goto err; + pr_warning("%s: power class selection to " + "bus width %d failed\n", + mmc_hostname(card->host), + 1 << bus_width); err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, @@ -1164,7 +1165,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, err = mmc_select_powerclass(card, ext_csd_bits[idx][1], ext_csd); if (err) - goto err; + pr_warning("%s: power class selection to " + "bus width %d ddr %d failed\n", + mmc_hostname(card->host), + 1 << bus_width, ddr); err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, @@ -1326,7 +1330,7 @@ static int mmc_suspend(struct mmc_host *host) if (!err) mmc_card_set_sleep(host->card); } else if (!mmc_host_is_spi(host)) - mmc_deselect_cards(host); + err = mmc_deselect_cards(host); host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200); mmc_release_host(host); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index c272c6868ecf..b2b43f624b9e 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -1075,16 +1075,18 @@ static void mmc_sd_detect(struct mmc_host *host) */ static int mmc_sd_suspend(struct mmc_host *host) { + int err = 0; + BUG_ON(!host); BUG_ON(!host->card); mmc_claim_host(host); if (!mmc_host_is_spi(host)) - mmc_deselect_cards(host); + err = mmc_deselect_cards(host); host->card->state &= ~MMC_STATE_HIGHSPEED; mmc_release_host(host); - return 0; + return err; } /* diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 13d0e95380ab..41c5fd8848f4 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -218,6 +218,12 @@ static int sdio_enable_wide(struct mmc_card *card) if (ret) return ret; + if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED) + pr_warning("%s: SDIO_CCCR_IF is invalid: 0x%02x\n", + mmc_hostname(card->host), ctrl); + + /* set as 4-bit bus width */ + ctrl &= ~SDIO_BUS_WIDTH_MASK; ctrl |= SDIO_BUS_WIDTH_4BIT; ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL); diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h index 787aba1682bb..ab56f7db5315 100644 --- a/drivers/mmc/host/atmel-mci-regs.h +++ b/drivers/mmc/host/atmel-mci-regs.h @@ -140,4 +140,18 @@ #define atmci_writel(port,reg,value) \ __raw_writel((value), (port)->regs + reg) +/* + * Fix sconfig's burst size according to atmel MCI. We need to convert them as: + * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. + * + * This can be done by finding most significant bit set. + */ +static inline unsigned int atmci_convert_chksize(unsigned int maxburst) +{ + if (maxburst > 1) + return fls(maxburst) - 2; + else + return 0; +} + #endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */ diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 420aca642b14..f2c115e06438 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -910,6 +910,7 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) enum dma_data_direction direction; enum dma_transfer_direction slave_dirn; unsigned int sglen; + u32 maxburst; u32 iflags; data->error = -EINPROGRESS; @@ -943,17 +944,18 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) if (!chan) return -ENODEV; - if (host->caps.has_dma) - atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(3) | ATMCI_DMAEN); - if (data->flags & MMC_DATA_READ) { direction = DMA_FROM_DEVICE; host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM; + maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst); } else { direction = DMA_TO_DEVICE; host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV; + maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst); } + atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) | ATMCI_DMAEN); + sglen = dma_map_sg(chan->device->dev, data->sg, data->sg_len, direction); @@ -2314,6 +2316,8 @@ static int __init atmci_probe(struct platform_device *pdev) platform_set_drvdata(pdev, host); + setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host); + /* We need at least one slot to succeed */ nr_slots = 0; ret = -ENODEV; @@ -2352,8 +2356,6 @@ static int __init atmci_probe(struct platform_device *pdev) } } - setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host); - dev_info(&pdev->dev, "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", host->mapbase, irq, nr_slots); diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 9bbf45f8c538..1ca5e72ceb65 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -418,6 +418,8 @@ static int dw_mci_idmac_init(struct dw_mci *host) p->des3 = host->sg_dma; p->des0 = IDMAC_DES0_ER; + mci_writel(host, BMOD, SDMMC_IDMAC_SWRESET); + /* Mask out interrupts - get Tx & Rx complete only */ mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI); @@ -615,14 +617,15 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot) u32 div; if (slot->clock != host->current_speed) { - if (host->bus_hz % slot->clock) + div = host->bus_hz / slot->clock; + if (host->bus_hz % slot->clock && host->bus_hz > slot->clock) /* * move the + 1 after the divide to prevent * over-clocking the card. */ - div = ((host->bus_hz / slot->clock) >> 1) + 1; - else - div = (host->bus_hz / slot->clock) >> 1; + div += 1; + + div = (host->bus_hz != slot->clock) ? DIV_ROUND_UP(div, 2) : 0; dev_info(&slot->mmc->class_dev, "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ" @@ -939,8 +942,8 @@ static void dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd mdelay(20); if (cmd->data) { - host->data = NULL; dw_mci_stop_dma(host); + host->data = NULL; } } } @@ -1623,7 +1626,6 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) { mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI); mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI); - set_bit(EVENT_DATA_COMPLETE, &host->pending_events); host->dma_ops->complete(host); } #endif @@ -1725,7 +1727,8 @@ static void dw_mci_work_routine_card(struct work_struct *work) #ifdef CONFIG_MMC_DW_IDMAC ctrl = mci_readl(host, BMOD); - ctrl |= 0x01; /* Software reset of DMA */ + /* Software reset of DMA */ + ctrl |= SDMMC_IDMAC_SWRESET; mci_writel(host, BMOD, ctrl); #endif @@ -1950,10 +1953,6 @@ int dw_mci_probe(struct dw_mci *host) spin_lock_init(&host->lock); INIT_LIST_HEAD(&host->queue); - - host->dma_ops = host->pdata->dma_ops; - dw_mci_init_dma(host); - /* * Get the host data width - this assumes that HCON has been set with * the correct values. @@ -1981,10 +1980,11 @@ int dw_mci_probe(struct dw_mci *host) } /* Reset all blocks */ - if (!mci_wait_reset(&host->dev, host)) { - ret = -ENODEV; - goto err_dmaunmap; - } + if (!mci_wait_reset(&host->dev, host)) + return -ENODEV; + + host->dma_ops = host->pdata->dma_ops; + dw_mci_init_dma(host); /* Clear the interrupts for the host controller */ mci_writel(host, RINTSTS, 0xFFFFFFFF); @@ -2170,14 +2170,14 @@ int dw_mci_resume(struct dw_mci *host) if (host->vmmc) regulator_enable(host->vmmc); - if (host->dma_ops->init) - host->dma_ops->init(host); - if (!mci_wait_reset(&host->dev, host)) { ret = -ENODEV; return ret; } + if (host->dma_ops->init) + host->dma_ops->init(host); + /* Restore the old value at FIFOTH register */ mci_writel(host, FIFOTH, host->fifoth_val); diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index f0fcce40cd8d..50ff19a62368 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1216,12 +1216,7 @@ static void mmci_dt_populate_generic_pdata(struct device_node *np, int bus_width = 0; pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0); - if (!pdata->gpio_wp) - pdata->gpio_wp = -1; - pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0); - if (!pdata->gpio_cd) - pdata->gpio_cd = -1; if (of_get_property(np, "cd-inverted", NULL)) pdata->cd_invert = true; @@ -1276,6 +1271,12 @@ static int __devinit mmci_probe(struct amba_device *dev, return -EINVAL; } + if (!plat) { + plat = devm_kzalloc(&dev->dev, sizeof(*plat), GFP_KERNEL); + if (!plat) + return -ENOMEM; + } + if (np) mmci_dt_populate_generic_pdata(np, plat); @@ -1424,6 +1425,10 @@ static int __devinit mmci_probe(struct amba_device *dev, writel(0, host->base + MMCIMASK1); writel(0xfff, host->base + MMCICLEAR); + if (plat->gpio_cd == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_gpio_cd; + } if (gpio_is_valid(plat->gpio_cd)) { ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)"); if (ret == 0) @@ -1447,6 +1452,10 @@ static int __devinit mmci_probe(struct amba_device *dev, if (ret >= 0) host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd); } + if (plat->gpio_wp == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_gpio_wp; + } if (gpio_is_valid(plat->gpio_wp)) { ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)"); if (ret == 0) diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index 34a90266ab11..277161d279b8 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -894,8 +894,8 @@ static struct platform_driver mxs_mmc_driver = { .owner = THIS_MODULE, #ifdef CONFIG_PM .pm = &mxs_mmc_pm_ops, - .of_match_table = mxs_mmc_dt_ids, #endif + .of_match_table = mxs_mmc_dt_ids, }, }; diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 552196c764d4..3e8dcf8d2e05 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1300,7 +1300,7 @@ static const struct mmc_host_ops mmc_omap_ops = { .set_ios = mmc_omap_set_ios, }; -static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id) +static int __devinit mmc_omap_new_slot(struct mmc_omap_host *host, int id) { struct mmc_omap_slot *slot = NULL; struct mmc_host *mmc; @@ -1485,24 +1485,26 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev) } host->nr_slots = pdata->nr_slots; - for (i = 0; i < pdata->nr_slots; i++) { - ret = mmc_omap_new_slot(host, i); - if (ret < 0) { - while (--i >= 0) - mmc_omap_remove_slot(host->slots[i]); - - goto err_plat_cleanup; - } - } - host->reg_shift = (cpu_is_omap7xx() ? 1 : 2); host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0); if (!host->mmc_omap_wq) goto err_plat_cleanup; + for (i = 0; i < pdata->nr_slots; i++) { + ret = mmc_omap_new_slot(host, i); + if (ret < 0) { + while (--i >= 0) + mmc_omap_remove_slot(host->slots[i]); + + goto err_destroy_wq; + } + } + return 0; +err_destroy_wq: + destroy_workqueue(host->mmc_omap_wq); err_plat_cleanup: if (pdata->cleanup) pdata->cleanup(&pdev->dev); diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 9a7a60aeb19e..389a3eedfc24 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -85,7 +85,6 @@ #define BRR_ENABLE (1 << 5) #define DTO_ENABLE (1 << 20) #define INIT_STREAM (1 << 1) -#define ACEN_ACMD12 (1 << 2) #define DP_SELECT (1 << 21) #define DDIR (1 << 4) #define DMA_EN 0x1 @@ -117,7 +116,6 @@ #define OMAP_MMC_MAX_CLOCK 52000000 #define DRIVER_NAME "omap_hsmmc" -#define AUTO_CMD12 (1 << 0) /* Auto CMD12 support */ /* * One controller can have multiple slots, like on some omap boards using * omap.c controller driver. Luckily this is not currently done on any known @@ -177,7 +175,6 @@ struct omap_hsmmc_host { int reqs_blocked; int use_reg; int req_in_progress; - unsigned int flags; struct omap_hsmmc_next next_data; struct omap_mmc_platform_data *pdata; @@ -773,8 +770,6 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd, cmdtype = 0x3; cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22); - if ((host->flags & AUTO_CMD12) && mmc_op_multi(cmd->opcode)) - cmdreg |= ACEN_ACMD12; if (data) { cmdreg |= DP_SELECT | MSBS | BCE; @@ -847,14 +842,11 @@ omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data) else data->bytes_xfered = 0; - if (data->stop && ((!(host->flags & AUTO_CMD12)) || data->error)) { - omap_hsmmc_start_command(host, data->stop, NULL); - } else { - if (data->stop) - data->stop->resp[0] = OMAP_HSMMC_READ(host->base, - RSP76); + if (!data->stop) { omap_hsmmc_request_done(host, data->mrq); + return; } + omap_hsmmc_start_command(host, data->stop, NULL); } /* @@ -1859,7 +1851,6 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev) host->mapbase = res->start + pdata->reg_offset; host->base = ioremap(host->mapbase, SZ_4K); host->power_mode = MMC_POWER_OFF; - host->flags = AUTO_CMD12; host->next_data.cookie = 1; platform_set_drvdata(pdev, host); diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 55a164fcaa15..a50c205ea208 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -404,7 +404,7 @@ static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc) if (sc->ext_cd_irq && request_threaded_irq(sc->ext_cd_irq, NULL, sdhci_s3c_gpio_card_detect_thread, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, dev_name(dev), sc) == 0) { int status = gpio_get_value(sc->ext_cd_gpio); if (pdata->ext_cd_gpio_invert) diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c index 1fe32dfa7cd4..423da8194cd8 100644 --- a/drivers/mmc/host/sdhci-spear.c +++ b/drivers/mmc/host/sdhci-spear.c @@ -4,7 +4,7 @@ * Support of SDHCI platform devices for spear soc family * * Copyright (C) 2010 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * Inspired by sdhci-pltfm.c * @@ -289,5 +289,5 @@ static struct platform_driver sdhci_driver = { module_platform_driver(sdhci_driver); MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver"); -MODULE_AUTHOR("Viresh Kumar "); +MODULE_AUTHOR("Viresh Kumar "); MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index e626732aff77..f4b8b4db3a9a 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -680,8 +680,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd) } if (count >= 0xF) { - pr_warning("%s: Too large timeout 0x%x requested for CMD%d!\n", - mmc_hostname(host->mmc), count, cmd->opcode); + DBG("%s: Too large timeout 0x%x requested for CMD%d!\n", + mmc_hostname(host->mmc), count, cmd->opcode); count = 0xE; } diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c index ae36d7e1e913..551e316e4454 100644 --- a/drivers/mtd/mtdoops.c +++ b/drivers/mtd/mtdoops.c @@ -304,32 +304,17 @@ static void find_next_position(struct mtdoops_context *cxt) } static void mtdoops_do_dump(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, const char *s1, unsigned long l1, - const char *s2, unsigned long l2) + enum kmsg_dump_reason reason) { struct mtdoops_context *cxt = container_of(dumper, struct mtdoops_context, dump); - unsigned long s1_start, s2_start; - unsigned long l1_cpy, l2_cpy; - char *dst; - - if (reason != KMSG_DUMP_OOPS && - reason != KMSG_DUMP_PANIC) - return; /* Only dump oopses if dump_oops is set */ if (reason == KMSG_DUMP_OOPS && !dump_oops) return; - dst = cxt->oops_buf + MTDOOPS_HEADER_SIZE; /* Skip the header */ - l2_cpy = min(l2, record_size - MTDOOPS_HEADER_SIZE); - l1_cpy = min(l1, record_size - MTDOOPS_HEADER_SIZE - l2_cpy); - - s2_start = l2 - l2_cpy; - s1_start = l1 - l1_cpy; - - memcpy(dst, s1 + s1_start, l1_cpy); - memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy); + kmsg_dump_get_buffer(dumper, true, cxt->oops_buf + MTDOOPS_HEADER_SIZE, + record_size - MTDOOPS_HEADER_SIZE, NULL); /* Panics must be written immediately */ if (reason != KMSG_DUMP_OOPS) @@ -375,6 +360,7 @@ static void mtdoops_notify_add(struct mtd_info *mtd) return; } + cxt->dump.max_reason = KMSG_DUMP_OOPS; cxt->dump.dump = mtdoops_do_dump; err = kmsg_dump_register(&cxt->dump); if (err) { diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index 41371ba1a811..f3f6cfedd69e 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -102,7 +102,7 @@ static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; static int cafe_device_ready(struct mtd_info *mtd) { struct cafe_priv *cafe = mtd->priv; - int result = !!(cafe_readl(cafe, NAND_STATUS) | 0x40000000); + int result = !!(cafe_readl(cafe, NAND_STATUS) & 0x40000000); uint32_t irqs = cafe_readl(cafe, NAND_IRQ); cafe_writel(cafe, irqs, NAND_IRQ); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index a05b7b444d4f..a6cad5caba78 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -920,12 +920,12 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, */ memset(chip->oob_poi, ~0, mtd->oobsize); chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0]; - - read_page_swap_end(this, buf, mtd->writesize, - this->payload_virt, this->payload_phys, - nfc_geo->payload_size, - payload_virt, payload_phys); } + + read_page_swap_end(this, buf, mtd->writesize, + this->payload_virt, this->payload_phys, + nfc_geo->payload_size, + payload_virt, payload_phys); exit_nfc: return ret; } diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index c58e6a93f445..6acc790c2fbb 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -273,6 +273,26 @@ static struct nand_ecclayout nandv2_hw_eccoob_4k = { static const char *part_probes[] = { "RedBoot", "cmdlinepart", "ofpart", NULL }; +static void memcpy32_fromio(void *trg, const void __iomem *src, size_t size) +{ + int i; + u32 *t = trg; + const __iomem u32 *s = src; + + for (i = 0; i < (size >> 2); i++) + *t++ = __raw_readl(s++); +} + +static void memcpy32_toio(void __iomem *trg, const void *src, int size) +{ + int i; + u32 __iomem *t = trg; + const u32 *s = src; + + for (i = 0; i < (size >> 2); i++) + __raw_writel(*s++, t++); +} + static int check_int_v3(struct mxc_nand_host *host) { uint32_t tmp; @@ -519,7 +539,7 @@ static void send_read_id_v3(struct mxc_nand_host *host) wait_op_done(host, true); - memcpy_fromio(host->data_buf, host->main_area0, 16); + memcpy32_fromio(host->data_buf, host->main_area0, 16); } /* Request the NANDFC to perform a read of the NAND device ID. */ @@ -535,7 +555,7 @@ static void send_read_id_v1_v2(struct mxc_nand_host *host) /* Wait for operation to complete */ wait_op_done(host, true); - memcpy_fromio(host->data_buf, host->main_area0, 16); + memcpy32_fromio(host->data_buf, host->main_area0, 16); if (this->options & NAND_BUSWIDTH_16) { /* compress the ID info */ @@ -797,16 +817,16 @@ static void copy_spare(struct mtd_info *mtd, bool bfrom) if (bfrom) { for (i = 0; i < n - 1; i++) - memcpy_fromio(d + i * j, s + i * t, j); + memcpy32_fromio(d + i * j, s + i * t, j); /* the last section */ - memcpy_fromio(d + i * j, s + i * t, mtd->oobsize - i * j); + memcpy32_fromio(d + i * j, s + i * t, mtd->oobsize - i * j); } else { for (i = 0; i < n - 1; i++) - memcpy_toio(&s[i * t], &d[i * j], j); + memcpy32_toio(&s[i * t], &d[i * j], j); /* the last section */ - memcpy_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j); + memcpy32_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j); } } @@ -1070,7 +1090,8 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, host->devtype_data->send_page(mtd, NFC_OUTPUT); - memcpy_fromio(host->data_buf, host->main_area0, mtd->writesize); + memcpy32_fromio(host->data_buf, host->main_area0, + mtd->writesize); copy_spare(mtd, true); break; @@ -1086,7 +1107,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, break; case NAND_CMD_PAGEPROG: - memcpy_toio(host->main_area0, host->data_buf, mtd->writesize); + memcpy32_toio(host->main_area0, host->data_buf, mtd->writesize); copy_spare(mtd, false); host->devtype_data->send_page(mtd, NFC_INPUT); host->devtype_data->send_cmd(host, command, true); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index d47586cf64ce..a11253a0fcab 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3501,6 +3501,13 @@ int nand_scan_tail(struct mtd_info *mtd) /* propagate ecc info to mtd_info */ mtd->ecclayout = chip->ecc.layout; mtd->ecc_strength = chip->ecc.strength; + /* + * Initialize bitflip_threshold to its default prior scan_bbt() call. + * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be + * properly set. + */ + if (!mtd->bitflip_threshold) + mtd->bitflip_threshold = mtd->ecc_strength; /* Check, if we should skip the bad block table scan */ if (chip->options & NAND_SKIP_BBTSCAN) diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 6cc8fbfabb8e..cf0cd3146817 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include #include #include @@ -546,12 +546,6 @@ static char *get_partition_name(int i) return kstrdup(buf, GFP_KERNEL); } -static uint64_t divide(uint64_t n, uint32_t d) -{ - do_div(n, d); - return n; -} - /* * Initialize the nandsim structure. * @@ -580,7 +574,7 @@ static int init_nandsim(struct mtd_info *mtd) ns->geom.oobsz = mtd->oobsize; ns->geom.secsz = mtd->erasesize; ns->geom.pgszoob = ns->geom.pgsz + ns->geom.oobsz; - ns->geom.pgnum = divide(ns->geom.totsz, ns->geom.pgsz); + ns->geom.pgnum = div_u64(ns->geom.totsz, ns->geom.pgsz); ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz; ns->geom.secshift = ffs(ns->geom.secsz) - 1; ns->geom.pgshift = chip->page_shift; @@ -921,7 +915,7 @@ static int setup_wear_reporting(struct mtd_info *mtd) if (!rptwear) return 0; - wear_eb_count = divide(mtd->size, mtd->erasesize); + wear_eb_count = div_u64(mtd->size, mtd->erasesize); mem = wear_eb_count * sizeof(unsigned long); if (mem / sizeof(unsigned long) != wear_eb_count) { NS_ERR("Too many erase blocks for wear reporting\n"); diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c index 09d4f8d9d592..7c1380305219 100644 --- a/drivers/mtd/ubi/debug.c +++ b/drivers/mtd/ubi/debug.c @@ -264,7 +264,7 @@ static struct dentry *dfs_rootdir; */ int ubi_debugfs_init(void) { - if (!IS_ENABLED(DEBUG_FS)) + if (!IS_ENABLED(CONFIG_DEBUG_FS)) return 0; dfs_rootdir = debugfs_create_dir("ubi", NULL); @@ -284,7 +284,7 @@ int ubi_debugfs_init(void) */ void ubi_debugfs_exit(void) { - if (IS_ENABLED(DEBUG_FS)) + if (IS_ENABLED(CONFIG_DEBUG_FS)) debugfs_remove(dfs_rootdir); } @@ -407,7 +407,7 @@ int ubi_debugfs_init_dev(struct ubi_device *ubi) struct dentry *dent; struct ubi_debug_info *d = ubi->dbg; - if (!IS_ENABLED(DEBUG_FS)) + if (!IS_ENABLED(CONFIG_DEBUG_FS)) return 0; n = snprintf(d->dfs_dir_name, UBI_DFS_DIR_LEN + 1, UBI_DFS_DIR_NAME, @@ -477,6 +477,6 @@ out: */ void ubi_debugfs_exit_dev(struct ubi_device *ubi) { - if (IS_ENABLED(DEBUG_FS)) + if (IS_ENABLED(CONFIG_DEBUG_FS)) debugfs_remove_recursive(ubi->dbg->dfs_dir); } diff --git a/drivers/net/bonding/bond_debugfs.c b/drivers/net/bonding/bond_debugfs.c index 3680aa251dea..2cf084eb9d52 100644 --- a/drivers/net/bonding/bond_debugfs.c +++ b/drivers/net/bonding/bond_debugfs.c @@ -6,7 +6,7 @@ #include "bonding.h" #include "bond_alb.h" -#ifdef CONFIG_DEBUG_FS +#if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_NET_NS) #include #include diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 2ee8cf9e8a3b..2ee76993f052 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -76,6 +76,7 @@ #include #include #include +#include #include "bonding.h" #include "bond_3ad.h" #include "bond_alb.h" @@ -381,8 +382,6 @@ struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr) return next; } -#define bond_queue_mapping(skb) (*(u16 *)((skb)->cb)) - /** * bond_dev_queue_xmit - Prepare skb for xmit. * @@ -395,7 +394,9 @@ int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, { skb->dev = slave_dev; - skb->queue_mapping = bond_queue_mapping(skb); + BUILD_BUG_ON(sizeof(skb->queue_mapping) != + sizeof(qdisc_skb_cb(skb)->bond_queue_mapping)); + skb->queue_mapping = qdisc_skb_cb(skb)->bond_queue_mapping; if (unlikely(netpoll_tx_running(slave_dev))) bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb); @@ -3226,6 +3227,12 @@ static int bond_master_netdev_event(unsigned long event, switch (event) { case NETDEV_CHANGENAME: return bond_event_changename(event_bond); + case NETDEV_UNREGISTER: + bond_remove_proc_entry(event_bond); + break; + case NETDEV_REGISTER: + bond_create_proc_entry(event_bond); + break; default: break; } @@ -4171,7 +4178,7 @@ static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb) /* * Save the original txq to restore before passing to the driver */ - bond_queue_mapping(skb) = skb->queue_mapping; + qdisc_skb_cb(skb)->bond_queue_mapping = skb->queue_mapping; if (unlikely(txq >= dev->real_num_tx_queues)) { do { @@ -4410,8 +4417,6 @@ static void bond_uninit(struct net_device *bond_dev) bond_work_cancel_all(bond); - bond_remove_proc_entry(bond); - bond_debug_unregister(bond); __hw_addr_flush(&bond->mc_list); @@ -4813,7 +4818,6 @@ static int bond_init(struct net_device *bond_dev) bond_set_lockdep_class(bond_dev); - bond_create_proc_entry(bond); list_add_tail(&bond->bond_list, &bn->dev_list); bond_prepare_sysfs_group(bond); diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c index ad284baafe87..3cea38d37344 100644 --- a/drivers/net/bonding/bond_procfs.c +++ b/drivers/net/bonding/bond_procfs.c @@ -150,14 +150,25 @@ static void bond_info_show_master(struct seq_file *seq) } } +static const char *bond_slave_link_status(s8 link) +{ + static const char * const status[] = { + [BOND_LINK_UP] = "up", + [BOND_LINK_FAIL] = "going down", + [BOND_LINK_DOWN] = "down", + [BOND_LINK_BACK] = "going back", + }; + + return status[link]; +} + static void bond_info_show_slave(struct seq_file *seq, const struct slave *slave) { struct bonding *bond = seq->private; seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name); - seq_printf(seq, "MII Status: %s\n", - (slave->link == BOND_LINK_UP) ? "up" : "down"); + seq_printf(seq, "MII Status: %s\n", bond_slave_link_status(slave->link)); if (slave->speed == SPEED_UNKNOWN) seq_printf(seq, "Speed: %s\n", "Unknown"); else diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index aef42f045320..485bedb8278c 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1082,8 +1082,12 @@ static ssize_t bonding_store_primary(struct device *d, } } - pr_info("%s: Unable to set %.*s as primary slave.\n", - bond->dev->name, (int)strlen(buf) - 1, buf); + strncpy(bond->params.primary, ifname, IFNAMSIZ); + bond->params.primary[IFNAMSIZ - 1] = 0; + + pr_info("%s: Recording %s as primary, " + "but it has not been enslaved to %s yet.\n", + bond->dev->name, ifname, bond->dev->name); out: write_unlock_bh(&bond->curr_slave_lock); read_unlock(&bond->lock); diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c index 1520814c77c7..4a27adb7ae67 100644 --- a/drivers/net/caif/caif_hsi.c +++ b/drivers/net/caif/caif_hsi.c @@ -693,8 +693,6 @@ static void cfhsi_rx_done(struct cfhsi *cfhsi) */ memcpy(rx_buf, (u8 *)piggy_desc, CFHSI_DESC_SHORT_SZ); - /* Mark no embedded frame here */ - piggy_desc->offset = 0; if (desc_pld_len == -EPROTO) goto out_of_sync; } @@ -737,6 +735,8 @@ static void cfhsi_rx_done(struct cfhsi *cfhsi) /* Extract any payload in piggyback descriptor. */ if (cfhsi_rx_desc(piggy_desc, cfhsi) < 0) goto out_of_sync; + /* Mark no embedded frame after extracting it */ + piggy_desc->offset = 0; } } @@ -1178,6 +1178,7 @@ int cfhsi_probe(struct platform_device *pdev) dev_err(&ndev->dev, "%s: Registration error: %d.\n", __func__, res); free_netdev(ndev); + return -ENODEV; } /* Add CAIF HSI device to list. */ spin_lock(&cfhsi_list_lock); diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 536bda072a16..86cd532c78f9 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -590,8 +590,8 @@ static void c_can_chip_config(struct net_device *dev) priv->write_reg(priv, &priv->regs->control, CONTROL_ENABLE_AR); - if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY & - CAN_CTRLMODE_LOOPBACK)) { + if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) && + (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) { /* loopback + silent mode : useful for hot self-test */ priv->write_reg(priv, &priv->regs->control, CONTROL_EIE | CONTROL_SIE | CONTROL_IE | CONTROL_TEST); @@ -686,7 +686,7 @@ static int c_can_get_berr_counter(const struct net_device *dev, * * We iterate from priv->tx_echo to priv->tx_next and check if the * packet has been transmitted, echo it back to the CAN framework. - * If we discover a not yet transmitted package, stop looking for more. + * If we discover a not yet transmitted packet, stop looking for more. */ static void c_can_do_tx(struct net_device *dev) { @@ -698,7 +698,7 @@ static void c_can_do_tx(struct net_device *dev) for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) { msg_obj_no = get_tx_echo_msg_obj(priv); val = c_can_read_reg32(priv, &priv->regs->txrqst1); - if (!(val & (1 << msg_obj_no))) { + if (!(val & (1 << (msg_obj_no - 1)))) { can_get_echo_skb(dev, msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST); stats->tx_bytes += priv->read_reg(priv, @@ -706,6 +706,8 @@ static void c_can_do_tx(struct net_device *dev) & IF_MCONT_DLC_MASK; stats->tx_packets++; c_can_inval_msg_object(dev, 0, msg_obj_no); + } else { + break; } } @@ -950,7 +952,7 @@ static int c_can_poll(struct napi_struct *napi, int quota) struct net_device *dev = napi->dev; struct c_can_priv *priv = netdev_priv(dev); - irqstatus = priv->read_reg(priv, &priv->regs->interrupt); + irqstatus = priv->irqstatus; if (!irqstatus) goto end; @@ -1028,12 +1030,11 @@ end: static irqreturn_t c_can_isr(int irq, void *dev_id) { - u16 irqstatus; struct net_device *dev = (struct net_device *)dev_id; struct c_can_priv *priv = netdev_priv(dev); - irqstatus = priv->read_reg(priv, &priv->regs->interrupt); - if (!irqstatus) + priv->irqstatus = priv->read_reg(priv, &priv->regs->interrupt); + if (!priv->irqstatus) return IRQ_NONE; /* disable all interrupts and schedule the NAPI */ @@ -1063,10 +1064,11 @@ static int c_can_open(struct net_device *dev) goto exit_irq_fail; } + napi_enable(&priv->napi); + /* start the c_can controller */ c_can_start(dev); - napi_enable(&priv->napi); netif_start_queue(dev); return 0; diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h index 9b7fbef3d09a..5f32d34af507 100644 --- a/drivers/net/can/c_can/c_can.h +++ b/drivers/net/can/c_can/c_can.h @@ -76,6 +76,7 @@ struct c_can_priv { unsigned int tx_next; unsigned int tx_echo; void *priv; /* for board-specific data */ + u16 irqstatus; }; struct net_device *alloc_c_can_dev(void); diff --git a/drivers/net/can/cc770/cc770_platform.c b/drivers/net/can/cc770/cc770_platform.c index 53115eee8075..688371cda37a 100644 --- a/drivers/net/can/cc770/cc770_platform.c +++ b/drivers/net/can/cc770/cc770_platform.c @@ -154,7 +154,7 @@ static int __devinit cc770_get_platform_data(struct platform_device *pdev, struct cc770_platform_data *pdata = pdev->dev.platform_data; priv->can.clock.freq = pdata->osc_freq; - if (priv->cpu_interface | CPUIF_DSC) + if (priv->cpu_interface & CPUIF_DSC) priv->can.clock.freq /= 2; priv->clkout = pdata->cor; priv->bus_config = pdata->bcr; diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 38c0690df5c8..81d474102378 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -939,12 +939,12 @@ static int __devinit flexcan_probe(struct platform_device *pdev) return PTR_ERR(pinctrl); if (pdev->dev.of_node) { - const u32 *clock_freq_p; + const __be32 *clock_freq_p; clock_freq_p = of_get_property(pdev->dev.of_node, "clock-frequency", NULL); if (clock_freq_p) - clock_freq = *clock_freq_p; + clock_freq = be32_to_cpup(clock_freq_p); } if (!clock_freq) { diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c index 442d91a2747b..bab0158f1cc3 100644 --- a/drivers/net/dummy.c +++ b/drivers/net/dummy.c @@ -187,8 +187,10 @@ static int __init dummy_init_module(void) rtnl_lock(); err = __rtnl_link_register(&dummy_link_ops); - for (i = 0; i < numdummies && !err; i++) + for (i = 0; i < numdummies && !err; i++) { err = dummy_init_one(); + cond_resched(); + } if (err < 0) __rtnl_link_unregister(&dummy_link_ops); rtnl_unlock(); diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 9cc15701101b..1f78b63d5efe 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -261,7 +261,6 @@ static void atl1c_check_link_status(struct atl1c_adapter *adapter) if ((phy_data & BMSR_LSTATUS) == 0) { /* link down */ netif_carrier_off(netdev); - netif_stop_queue(netdev); hw->hibernate = true; if (atl1c_reset_mac(hw) != 0) if (netif_msg_hw(adapter)) diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index 46b8b7d81633..d09c6b583d17 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -656,7 +656,7 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) dma_unmap_single(bp->sdev->dma_dev, mapping, RX_PKT_BUF_SZ, DMA_FROM_DEVICE); dev_kfree_skb_any(skb); - skb = __netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA); + skb = alloc_skb(RX_PKT_BUF_SZ, GFP_ATOMIC | GFP_DMA); if (skb == NULL) return -ENOMEM; mapping = dma_map_single(bp->sdev->dma_dev, skb->data, @@ -967,7 +967,7 @@ static netdev_tx_t b44_start_xmit(struct sk_buff *skb, struct net_device *dev) dma_unmap_single(bp->sdev->dma_dev, mapping, len, DMA_TO_DEVICE); - bounce_skb = __netdev_alloc_skb(dev, len, GFP_ATOMIC | GFP_DMA); + bounce_skb = alloc_skb(len, GFP_ATOMIC | GFP_DMA); if (!bounce_skb) goto err_out; diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index ac7b74488531..1fa4927a45b1 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -5372,7 +5372,7 @@ bnx2_free_tx_skbs(struct bnx2 *bp) int k, last; if (skb == NULL) { - j++; + j = NEXT_TX_BD(j); continue; } @@ -5384,8 +5384,8 @@ bnx2_free_tx_skbs(struct bnx2 *bp) tx_buf->skb = NULL; last = tx_buf->nr_frags; - j++; - for (k = 0; k < last; k++, j++) { + j = NEXT_TX_BD(j); + for (k = 0; k < last; k++, j = NEXT_TX_BD(j)) { tx_buf = &txr->tx_buf_ring[TX_RING_IDX(j)]; dma_unmap_page(&bp->pdev->dev, dma_unmap_addr(tx_buf, mapping), diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index e30e2a2f354c..7de824184979 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -747,21 +747,6 @@ struct bnx2x_fastpath { #define ETH_RX_ERROR_FALGS ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG -#define BNX2X_IP_CSUM_ERR(cqe) \ - (!((cqe)->fast_path_cqe.status_flags & \ - ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG) && \ - ((cqe)->fast_path_cqe.type_error_flags & \ - ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG)) - -#define BNX2X_L4_CSUM_ERR(cqe) \ - (!((cqe)->fast_path_cqe.status_flags & \ - ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG) && \ - ((cqe)->fast_path_cqe.type_error_flags & \ - ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG)) - -#define BNX2X_RX_CSUM_OK(cqe) \ - (!(BNX2X_L4_CSUM_ERR(cqe) || BNX2X_IP_CSUM_ERR(cqe))) - #define BNX2X_PRS_FLAG_OVERETH_IPV4(flags) \ (((le16_to_cpu(flags) & \ PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) >> \ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index ad0743bf4bde..8098eea9704d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -190,7 +190,7 @@ int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata) if ((netif_tx_queue_stopped(txq)) && (bp->state == BNX2X_STATE_OPEN) && - (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3)) + (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4)) netif_tx_wake_queue(txq); __netif_tx_unlock(txq); @@ -617,6 +617,25 @@ static int bnx2x_alloc_rx_data(struct bnx2x *bp, return 0; } +static void bnx2x_csum_validate(struct sk_buff *skb, union eth_rx_cqe *cqe, + struct bnx2x_fastpath *fp) +{ + /* Do nothing if no IP/L4 csum validation was done */ + + if (cqe->fast_path_cqe.status_flags & + (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG | + ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)) + return; + + /* If both IP/L4 validation were done, check if an error was found. */ + + if (cqe->fast_path_cqe.type_error_flags & + (ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG | + ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG)) + fp->eth_q_stats.hw_csum_err++; + else + skb->ip_summed = CHECKSUM_UNNECESSARY; +} int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget) { @@ -806,13 +825,9 @@ reuse_rx: skb_checksum_none_assert(skb); - if (bp->dev->features & NETIF_F_RXCSUM) { + if (bp->dev->features & NETIF_F_RXCSUM) + bnx2x_csum_validate(skb, cqe, fp); - if (likely(BNX2X_RX_CSUM_OK(cqe))) - skb->ip_summed = CHECKSUM_UNNECESSARY; - else - fp->eth_q_stats.hw_csum_err++; - } skb_record_rx_queue(skb, fp->rx_queue); @@ -2501,8 +2516,6 @@ int bnx2x_poll(struct napi_struct *napi, int budget) /* we split the first BD into headers and data BDs * to ease the pain of our fellow microcode engineers * we use one mapping for both BDs - * So far this has only been observed to happen - * in Other Operating Systems(TM) */ static noinline u16 bnx2x_tx_split(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata, @@ -3156,7 +3169,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) txdata->tx_bd_prod += nbd; - if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 3)) { + if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 4)) { netif_tx_stop_queue(txq); /* paired memory barrier is in bnx2x_tx_int(), we have to keep @@ -3165,7 +3178,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) smp_mb(); fp->eth_q_stats.driver_xoff++; - if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3) + if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4) netif_tx_wake_queue(txq); } txdata->tx_pkt++; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index a3fb7215cd89..6e7d5c0843b4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -40,6 +40,7 @@ #define I2C_BSC0 0 #define I2C_BSC1 1 #define I2C_WA_RETRY_CNT 3 +#define I2C_WA_PWR_ITER (I2C_WA_RETRY_CNT - 1) #define MCPR_IMC_COMMAND_READ_OP 1 #define MCPR_IMC_COMMAND_WRITE_OP 2 @@ -7659,6 +7660,28 @@ static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy, return -EINVAL; } +static void bnx2x_warpcore_power_module(struct link_params *params, + struct bnx2x_phy *phy, + u8 power) +{ + u32 pin_cfg; + struct bnx2x *bp = params->bp; + + pin_cfg = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].e3_sfp_ctrl)) & + PORT_HW_CFG_E3_PWR_DIS_MASK) >> + PORT_HW_CFG_E3_PWR_DIS_SHIFT; + + if (pin_cfg == PIN_CFG_NA) + return; + DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n", + power, pin_cfg); + /* Low ==> corresponding SFP+ module is powered + * high ==> the SFP+ module is powered down + */ + bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1); +} static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, struct link_params *params, u16 addr, u8 byte_cnt, @@ -7678,6 +7701,12 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, /* 4 byte aligned address */ addr32 = addr & (~0x3); do { + if (cnt == I2C_WA_PWR_ITER) { + bnx2x_warpcore_power_module(params, phy, 0); + /* Note that 100us are not enough here */ + usleep_range(1000,1000); + bnx2x_warpcore_power_module(params, phy, 1); + } rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt, data_array); } while ((rc != 0) && (++cnt < I2C_WA_RETRY_CNT)); @@ -8200,29 +8229,6 @@ static void bnx2x_set_sfp_module_fault_led(struct link_params *params, bnx2x_set_e1e2_module_fault_led(params, gpio_mode); } -static void bnx2x_warpcore_power_module(struct link_params *params, - struct bnx2x_phy *phy, - u8 power) -{ - u32 pin_cfg; - struct bnx2x *bp = params->bp; - - pin_cfg = (REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[params->port].e3_sfp_ctrl)) & - PORT_HW_CFG_E3_PWR_DIS_MASK) >> - PORT_HW_CFG_E3_PWR_DIS_SHIFT; - - if (pin_cfg == PIN_CFG_NA) - return; - DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n", - power, pin_cfg); - /* Low ==> corresponding SFP+ module is powered - * high ==> the SFP+ module is powered down - */ - bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1); -} - static void bnx2x_warpcore_hw_reset(struct bnx2x_phy *phy, struct link_params *params) { @@ -9748,7 +9754,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy, msleep(1); - if (!(CHIP_IS_E1(bp))) + if (!(CHIP_IS_E1x(bp))) port = BP_PATH(bp); else port = params->port; diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c index c95e7b5e2b85..2c89d17cbb29 100644 --- a/drivers/net/ethernet/broadcom/cnic.c +++ b/drivers/net/ethernet/broadcom/cnic.c @@ -534,7 +534,8 @@ int cnic_unregister_driver(int ulp_type) } if (atomic_read(&ulp_ops->ref_count) != 0) - netdev_warn(dev->netdev, "Failed waiting for ref count to go to zero\n"); + pr_warn("%s: Failed waiting for ref count to go to zero\n", + __func__); return 0; out_unlock: @@ -1053,12 +1054,13 @@ static int cnic_init_uio(struct cnic_dev *dev) uinfo = &udev->cnic_uinfo; - uinfo->mem[0].addr = dev->netdev->base_addr; + uinfo->mem[0].addr = pci_resource_start(dev->pcidev, 0); uinfo->mem[0].internal_addr = dev->regview; - uinfo->mem[0].size = dev->netdev->mem_end - dev->netdev->mem_start; uinfo->mem[0].memtype = UIO_MEM_PHYS; if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) { + uinfo->mem[0].size = MB_GET_CID_ADDR(TX_TSS_CID + + TX_MAX_TSS_RINGS + 1); uinfo->mem[1].addr = (unsigned long) cp->status_blk.gen & PAGE_MASK; if (cp->ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) @@ -1068,6 +1070,8 @@ static int cnic_init_uio(struct cnic_dev *dev) uinfo->name = "bnx2_cnic"; } else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) { + uinfo->mem[0].size = pci_resource_len(dev->pcidev, 0); + uinfo->mem[1].addr = (unsigned long) cp->bnx2x_def_status_blk & PAGE_MASK; uinfo->mem[1].size = sizeof(*cp->bnx2x_def_status_blk); diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index edeeb516807a..e47ff8be1d7b 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -14275,7 +14275,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) } } - if (tg3_flag(tp, 5755_PLUS)) + if (tg3_flag(tp, 5755_PLUS) || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) tg3_flag_set(tp, SHORT_DMA_BUG); if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 8d06ea381741..921c2082af4c 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -122,15 +122,15 @@ static int be_mcc_compl_process(struct be_adapter *adapter, goto done; if (compl_status == MCC_STATUS_UNAUTHORIZED_REQUEST) { - dev_warn(&adapter->pdev->dev, "This domain(VM) is not " - "permitted to execute this cmd (opcode %d)\n", - opcode); + dev_warn(&adapter->pdev->dev, + "opcode %d-%d is not permitted\n", + opcode, subsystem); } else { extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) & CQE_STATUS_EXTD_MASK; - dev_err(&adapter->pdev->dev, "Cmd (opcode %d) failed:" - "status %d, extd-status %d\n", - opcode, compl_status, extd_status); + dev_err(&adapter->pdev->dev, + "opcode %d-%d failed:status %d-%d\n", + opcode, subsystem, compl_status, extd_status); } } done: diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h index 9625bf420c16..b3f3fc3d1323 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.h +++ b/drivers/net/ethernet/emulex/benet/be_cmds.h @@ -1566,7 +1566,7 @@ struct be_hw_stats_v1 { u32 rsvd0[BE_TXP_SW_SZ]; struct be_erx_stats_v1 erx; struct be_pmem_stats pmem; - u32 rsvd1[3]; + u32 rsvd1[18]; }; struct be_cmd_req_get_stats_v1 { diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 08efd308d78a..501dfa9c88ec 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -736,6 +736,8 @@ static netdev_tx_t be_xmit(struct sk_buff *skb, copied = make_tx_wrbs(adapter, txq, skb, wrb_cnt, dummy_wrb); if (copied) { + int gso_segs = skb_shinfo(skb)->gso_segs; + /* record the sent skb in the sent_skb table */ BUG_ON(txo->sent_skb_list[start]); txo->sent_skb_list[start] = skb; @@ -753,8 +755,7 @@ static netdev_tx_t be_xmit(struct sk_buff *skb, be_txq_notify(adapter, txq->id, wrb_cnt); - be_tx_stats_update(txo, wrb_cnt, copied, - skb_shinfo(skb)->gso_segs, stopped); + be_tx_stats_update(txo, wrb_cnt, copied, gso_segs, stopped); } else { txq->head = start; dev_kfree_skb_any(skb); @@ -3236,7 +3237,7 @@ static void be_netdev_init(struct net_device *netdev) netdev->flags |= IFF_MULTICAST; - netif_set_gso_max_size(netdev, 65535); + netif_set_gso_max_size(netdev, 65535 - ETH_HLEN); netdev->netdev_ops = &be_netdev_ops; diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 0741aded9eb0..ab1d80ff0791 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1804,18 +1804,16 @@ void gfar_configure_coalescing(struct gfar_private *priv, if (priv->mode == MQ_MG_MODE) { baddr = ®s->txic0; for_each_set_bit(i, &tx_mask, priv->num_tx_queues) { - if (likely(priv->tx_queue[i]->txcoalescing)) { - gfar_write(baddr + i, 0); + gfar_write(baddr + i, 0); + if (likely(priv->tx_queue[i]->txcoalescing)) gfar_write(baddr + i, priv->tx_queue[i]->txic); - } } baddr = ®s->rxic0; for_each_set_bit(i, &rx_mask, priv->num_rx_queues) { - if (likely(priv->rx_queue[i]->rxcoalescing)) { - gfar_write(baddr + i, 0); + gfar_write(baddr + i, 0); + if (likely(priv->rx_queue[i]->rxcoalescing)) gfar_write(baddr + i, priv->rx_queue[i]->rxic); - } } } } @@ -2065,10 +2063,9 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } - /* Steal sock reference for processing TX time stamps */ - swap(skb_new->sk, skb->sk); - swap(skb_new->destructor, skb->destructor); - kfree_skb(skb); + if (skb->sk) + skb_set_owner_w(skb_new, skb->sk); + consume_skb(skb); skb = skb_new; } diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index 79b07ec6726f..0cafe4fe9406 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -122,8 +122,10 @@ config IGB_DCA config IGB_PTP bool "PTP Hardware Clock (PHC)" - default y - depends on IGB && PTP_1588_CLOCK + default n + depends on IGB && EXPERIMENTAL + select PPS + select PTP_1588_CLOCK ---help--- Say Y here if you want to use PTP Hardware Clock (PHC) in the driver. Only the basic clock operations have been implemented. @@ -223,7 +225,9 @@ config IXGBE_DCB config IXGBE_PTP bool "PTP Clock Support" default n - depends on IXGBE && PTP_1588_CLOCK + depends on IXGBE && EXPERIMENTAL + select PPS + select PTP_1588_CLOCK ---help--- Say Y here if you want support for 1588 Timestamping with a PHC device, using the PTP 1588 Clock support. This is diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 36db4df09aed..1f063dcd8f85 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -1572,6 +1572,9 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) ctrl = er32(CTRL); status = er32(STATUS); rxcw = er32(RXCW); + /* SYNCH bit and IV bit are sticky */ + udelay(10); + rxcw = er32(RXCW); if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) { diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 351a4097b2ba..76edbc1be33b 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -103,6 +103,7 @@ #define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ #define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ #define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ +#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ #define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ #define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index d863075df7a4..905e2147d918 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -258,7 +258,8 @@ static int e1000_set_settings(struct net_device *netdev, * When SoL/IDER sessions are active, autoneg/speed/duplex * cannot be changed */ - if (hw->phy.ops.check_reset_block(hw)) { + if (hw->phy.ops.check_reset_block && + hw->phy.ops.check_reset_block(hw)) { e_err("Cannot change link characteristics when SoL/IDER is active.\n"); return -EINVAL; } @@ -1615,7 +1616,8 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data) * PHY loopback cannot be performed if SoL/IDER * sessions are active */ - if (hw->phy.ops.check_reset_block(hw)) { + if (hw->phy.ops.check_reset_block && + hw->phy.ops.check_reset_block(hw)) { e_err("Cannot do PHY loopback test when SoL/IDER is active.\n"); *data = 0; goto out; diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 238ab2f8a5e7..e3a7b07df629 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -325,24 +325,46 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val) **/ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) { - u16 phy_reg; - u32 phy_id; + u16 phy_reg = 0; + u32 phy_id = 0; + s32 ret_val; + u16 retry_count; - e1e_rphy_locked(hw, PHY_ID1, &phy_reg); - phy_id = (u32)(phy_reg << 16); - e1e_rphy_locked(hw, PHY_ID2, &phy_reg); - phy_id |= (u32)(phy_reg & PHY_REVISION_MASK); + for (retry_count = 0; retry_count < 2; retry_count++) { + ret_val = e1e_rphy_locked(hw, PHY_ID1, &phy_reg); + if (ret_val || (phy_reg == 0xFFFF)) + continue; + phy_id = (u32)(phy_reg << 16); + + ret_val = e1e_rphy_locked(hw, PHY_ID2, &phy_reg); + if (ret_val || (phy_reg == 0xFFFF)) { + phy_id = 0; + continue; + } + phy_id |= (u32)(phy_reg & PHY_REVISION_MASK); + break; + } if (hw->phy.id) { if (hw->phy.id == phy_id) return true; - } else { - if ((phy_id != 0) && (phy_id != PHY_REVISION_MASK)) - hw->phy.id = phy_id; + } else if (phy_id) { + hw->phy.id = phy_id; + hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK); return true; } - return false; + /* + * In case the PHY needs to be in mdio slow mode, + * set slow mode and try to get the PHY id again. + */ + hw->phy.ops.release(hw); + ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (!ret_val) + ret_val = e1000e_get_phy_id(hw); + hw->phy.ops.acquire(hw); + + return !ret_val; } /** diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index 026e8b3ab52e..a13439928488 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -709,7 +709,7 @@ s32 e1000e_setup_link_generic(struct e1000_hw *hw) * In the case of the phy reset being blocked, we already have a link. * We do not need to set it up again. */ - if (hw->phy.ops.check_reset_block(hw)) + if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) return 0; /* diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index a4b0435b00dc..623e30b9964d 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -496,7 +496,7 @@ static void e1000_receive_skb(struct e1000_adapter *adapter, * @sk_buff: socket buffer with received data **/ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, - __le16 csum, struct sk_buff *skb) + struct sk_buff *skb) { u16 status = (u16)status_err; u8 errors = (u8)(status_err >> 24); @@ -511,8 +511,8 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, if (status & E1000_RXD_STAT_IXSM) return; - /* TCP/UDP checksum error bit is set */ - if (errors & E1000_RXD_ERR_TCPE) { + /* TCP/UDP checksum error bit or IP checksum error bit is set */ + if (errors & (E1000_RXD_ERR_TCPE | E1000_RXD_ERR_IPE)) { /* let the stack verify checksum errors */ adapter->hw_csum_err++; return; @@ -523,19 +523,7 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, return; /* It must be a TCP or UDP packet with a valid checksum */ - if (status & E1000_RXD_STAT_TCPCS) { - /* TCP checksum is good */ - skb->ip_summed = CHECKSUM_UNNECESSARY; - } else { - /* - * IP fragment with UDP payload - * Hardware complements the payload checksum, so we undo it - * and then put the value in host order for further stack use. - */ - __sum16 sum = (__force __sum16)swab16((__force u16)csum); - skb->csum = csum_unfold(~sum); - skb->ip_summed = CHECKSUM_COMPLETE; - } + skb->ip_summed = CHECKSUM_UNNECESSARY; adapter->hw_csum_good++; } @@ -954,8 +942,7 @@ static bool e1000_clean_rx_irq(struct e1000_ring *rx_ring, int *work_done, skb_put(skb, length); /* Receive Checksum Offload */ - e1000_rx_checksum(adapter, staterr, - rx_desc->wb.lower.hi_dword.csum_ip.csum, skb); + e1000_rx_checksum(adapter, staterr, skb); e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb); @@ -1341,8 +1328,7 @@ copydone: total_rx_bytes += skb->len; total_rx_packets++; - e1000_rx_checksum(adapter, staterr, - rx_desc->wb.lower.hi_dword.csum_ip.csum, skb); + e1000_rx_checksum(adapter, staterr, skb); e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb); @@ -1512,9 +1498,8 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done, } } - /* Receive Checksum Offload XXX recompute due to CRC strip? */ - e1000_rx_checksum(adapter, staterr, - rx_desc->wb.lower.hi_dword.csum_ip.csum, skb); + /* Receive Checksum Offload */ + e1000_rx_checksum(adapter, staterr, skb); e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb); @@ -3098,19 +3083,10 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) /* Enable Receive Checksum Offload for TCP and UDP */ rxcsum = er32(RXCSUM); - if (adapter->netdev->features & NETIF_F_RXCSUM) { + if (adapter->netdev->features & NETIF_F_RXCSUM) rxcsum |= E1000_RXCSUM_TUOFL; - - /* - * IPv4 payload checksum for UDP fragments must be - * used in conjunction with packet-split. - */ - if (adapter->rx_ps_pages) - rxcsum |= E1000_RXCSUM_IPPCSE; - } else { + else rxcsum &= ~E1000_RXCSUM_TUOFL; - /* no need to clear IPPCSE as it defaults to 0 */ - } ew32(RXCSUM, rxcsum); if (adapter->hw.mac.type == e1000_pch2lan) { @@ -5241,22 +5217,10 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; /* Jumbo frame support */ - if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) { - if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { - e_err("Jumbo Frames not supported.\n"); - return -EINVAL; - } - - /* - * IP payload checksum (enabled with jumbos/packet-split when - * Rx checksum is enabled) and generation of RSS hash is - * mutually exclusive in the hardware. - */ - if ((netdev->features & NETIF_F_RXCSUM) && - (netdev->features & NETIF_F_RXHASH)) { - e_err("Jumbo frames cannot be enabled when both receive checksum offload and receive hashing are enabled. Disable one of the receive offload features before enabling jumbos.\n"); - return -EINVAL; - } + if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) && + !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { + e_err("Jumbo Frames not supported.\n"); + return -EINVAL; } /* Supported frame sizes */ @@ -6030,17 +5994,6 @@ static int e1000_set_features(struct net_device *netdev, NETIF_F_RXALL))) return 0; - /* - * IP payload checksum (enabled with jumbos/packet-split when Rx - * checksum is enabled) and generation of RSS hash is mutually - * exclusive in the hardware. - */ - if (adapter->rx_ps_pages && - (features & NETIF_F_RXCSUM) && (features & NETIF_F_RXHASH)) { - e_err("Enabling both receive checksum offload and receive hashing is not possible with jumbo frames. Disable jumbos or enable only one of the receive offload features.\n"); - return -EINVAL; - } - if (changed & NETIF_F_RXFCS) { if (features & NETIF_F_RXFCS) { adapter->flags2 &= ~FLAG2_CRC_STRIPPING; @@ -6237,7 +6190,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->hw.phy.ms_type = e1000_ms_hw_default; } - if (hw->phy.ops.check_reset_block(hw)) + if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) e_info("PHY reset is blocked due to SOL/IDER session.\n"); /* Set initial default active device features */ @@ -6404,7 +6357,7 @@ err_register: if (!(adapter->flags & FLAG_HAS_AMT)) e1000e_release_hw_control(adapter); err_eeprom: - if (!hw->phy.ops.check_reset_block(hw)) + if (hw->phy.ops.check_reset_block && !hw->phy.ops.check_reset_block(hw)) e1000_phy_hw_reset(&adapter->hw); err_hw_init: kfree(adapter->tx_ring); diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 0334d013bc3c..b860d4f7ea2a 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -2155,9 +2155,11 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) s32 ret_val; u32 ctrl; - ret_val = phy->ops.check_reset_block(hw); - if (ret_val) - return 0; + if (phy->ops.check_reset_block) { + ret_val = phy->ops.check_reset_block(hw); + if (ret_val) + return 0; + } ret_val = phy->ops.acquire(hw); if (ret_val) diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index e65083958421..5e84eaac48c1 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -206,8 +206,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) mac->rar_entry_count = E1000_RAR_ENTRIES_82580; break; case e1000_i350: - case e1000_i210: - case e1000_i211: mac->rar_entry_count = E1000_RAR_ENTRIES_I350; break; default: diff --git a/drivers/net/ethernet/intel/igbvf/ethtool.c b/drivers/net/ethernet/intel/igbvf/ethtool.c index 8ce67064b9c5..90eef07943f4 100644 --- a/drivers/net/ethernet/intel/igbvf/ethtool.c +++ b/drivers/net/ethernet/intel/igbvf/ethtool.c @@ -357,21 +357,28 @@ static int igbvf_set_coalesce(struct net_device *netdev, struct igbvf_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - if ((ec->rx_coalesce_usecs > IGBVF_MAX_ITR_USECS) || - ((ec->rx_coalesce_usecs > 3) && - (ec->rx_coalesce_usecs < IGBVF_MIN_ITR_USECS)) || - (ec->rx_coalesce_usecs == 2)) - return -EINVAL; - - /* convert to rate of irq's per second */ - if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) { - adapter->current_itr = IGBVF_START_ITR; - adapter->requested_itr = ec->rx_coalesce_usecs; - } else { + if ((ec->rx_coalesce_usecs >= IGBVF_MIN_ITR_USECS) && + (ec->rx_coalesce_usecs <= IGBVF_MAX_ITR_USECS)) { adapter->current_itr = ec->rx_coalesce_usecs << 2; adapter->requested_itr = 1000000000 / (adapter->current_itr * 256); - } + } else if ((ec->rx_coalesce_usecs == 3) || + (ec->rx_coalesce_usecs == 2)) { + adapter->current_itr = IGBVF_START_ITR; + adapter->requested_itr = ec->rx_coalesce_usecs; + } else if (ec->rx_coalesce_usecs == 0) { + /* + * The user's desire is to turn off interrupt throttling + * altogether, but due to HW limitations, we can't do that. + * Instead we set a very small value in EITR, which would + * allow ~967k interrupts per second, but allow the adapter's + * internal clocking to still function properly. + */ + adapter->current_itr = 4; + adapter->requested_itr = 1000000000 / + (adapter->current_itr * 256); + } else + return -EINVAL; writel(adapter->current_itr, hw->hw_addr + adapter->rx_ring->itr_register); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 3ef3c5284e52..7af291e236bf 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -196,7 +196,7 @@ enum ixgbe_ring_state_t { __IXGBE_HANG_CHECK_ARMED, __IXGBE_RX_RSC_ENABLED, __IXGBE_RX_CSUM_UDP_ZERO_ERR, - __IXGBE_RX_FCOE_BUFSZ, + __IXGBE_RX_FCOE, }; #define check_for_tx_hang(ring) \ @@ -290,7 +290,7 @@ struct ixgbe_ring_feature { #if defined(IXGBE_FCOE) && (PAGE_SIZE < 8192) static inline unsigned int ixgbe_rx_pg_order(struct ixgbe_ring *ring) { - return test_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state) ? 1 : 0; + return test_bit(__IXGBE_RX_FCOE, &ring->state) ? 1 : 0; } #else #define ixgbe_rx_pg_order(_ring) 0 diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c index af1a5314b494..c377706e81a8 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c @@ -634,7 +634,7 @@ static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter, f = &adapter->ring_feature[RING_F_FCOE]; if ((rxr_idx >= f->mask) && (rxr_idx < f->mask + f->indices)) - set_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state); + set_bit(__IXGBE_RX_FCOE, &ring->state); } #endif /* IXGBE_FCOE */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index bf20457ea23a..e242104ab471 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -1058,17 +1058,17 @@ static inline void ixgbe_rx_hash(struct ixgbe_ring *ring, #ifdef IXGBE_FCOE /** * ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type - * @adapter: address of board private structure + * @ring: structure containing ring specific data * @rx_desc: advanced rx descriptor * * Returns : true if it is FCoE pkt */ -static inline bool ixgbe_rx_is_fcoe(struct ixgbe_adapter *adapter, +static inline bool ixgbe_rx_is_fcoe(struct ixgbe_ring *ring, union ixgbe_adv_rx_desc *rx_desc) { __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; - return (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) && + return test_bit(__IXGBE_RX_FCOE, &ring->state) && ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_ETQF_MASK)) == (cpu_to_le16(IXGBE_ETQF_FILTER_FCOE << IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT))); @@ -1148,7 +1148,7 @@ static bool ixgbe_alloc_mapped_page(struct ixgbe_ring *rx_ring, /* alloc new page for storage */ if (likely(!page)) { - page = alloc_pages(GFP_ATOMIC | __GFP_COLD, + page = alloc_pages(GFP_ATOMIC | __GFP_COLD | __GFP_COMP, ixgbe_rx_pg_order(rx_ring)); if (unlikely(!page)) { rx_ring->rx_stats.alloc_rx_page_failed++; @@ -1390,6 +1390,8 @@ static void ixgbe_process_skb_fields(struct ixgbe_ring *rx_ring, union ixgbe_adv_rx_desc *rx_desc, struct sk_buff *skb) { + struct net_device *dev = rx_ring->netdev; + ixgbe_update_rsc_stats(rx_ring, skb); ixgbe_rx_hash(rx_ring, rx_desc, skb); @@ -1401,14 +1403,15 @@ static void ixgbe_process_skb_fields(struct ixgbe_ring *rx_ring, ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector, skb); #endif - if (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) { + if ((dev->features & NETIF_F_HW_VLAN_RX) && + ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) { u16 vid = le16_to_cpu(rx_desc->wb.upper.vlan); __vlan_hwaccel_put_tag(skb, vid); } skb_record_rx_queue(skb, rx_ring->queue_index); - skb->protocol = eth_type_trans(skb, rx_ring->netdev); + skb->protocol = eth_type_trans(skb, dev); } static void ixgbe_rx_skb(struct ixgbe_q_vector *q_vector, @@ -1546,6 +1549,12 @@ static bool ixgbe_cleanup_headers(struct ixgbe_ring *rx_ring, skb->truesize -= ixgbe_rx_bufsz(rx_ring); } +#ifdef IXGBE_FCOE + /* do not attempt to pad FCoE Frames as this will disrupt DDP */ + if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) + return false; + +#endif /* if skb_pad returns an error the skb was freed */ if (unlikely(skb->len < 60)) { int pad_len = 60 - skb->len; @@ -1772,7 +1781,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, #ifdef IXGBE_FCOE /* if ddp, not passing to ULD unless for FCP_RSP or error */ - if (ixgbe_rx_is_fcoe(adapter, rx_desc)) { + if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) { ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb); if (!ddp_bytes) { dev_kfree_skb_any(skb); @@ -3607,10 +3616,6 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter) if (hw->mac.type == ixgbe_mac_82598EB) netif_set_gso_max_size(adapter->netdev, 32768); - - /* Enable VLAN tag insert/strip */ - adapter->netdev->features |= NETIF_F_HW_VLAN_RX; - hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true); #ifdef IXGBE_FCOE @@ -6642,6 +6647,11 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc) return -EINVAL; } + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { + e_err(drv, "Enable failed, SR-IOV enabled\n"); + return -EINVAL; + } + /* Hardware supports up to 8 traffic classes */ if (tc > adapter->dcb_cfg.num_tcs.pg_tcs || (hw->mac.type == ixgbe_mac_82598EB && @@ -6701,11 +6711,6 @@ static netdev_features_t ixgbe_fix_features(struct net_device *netdev, { struct ixgbe_adapter *adapter = netdev_priv(netdev); -#ifdef CONFIG_DCB - if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) - features &= ~NETIF_F_HW_VLAN_RX; -#endif - /* return error if RXHASH is being enabled when RSS is not supported */ if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) features &= ~NETIF_F_RXHASH; @@ -6718,7 +6723,6 @@ static netdev_features_t ixgbe_fix_features(struct net_device *netdev, if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) features &= ~NETIF_F_LRO; - return features; } @@ -6766,6 +6770,11 @@ static int ixgbe_set_features(struct net_device *netdev, need_reset = true; } + if (features & NETIF_F_HW_VLAN_RX) + ixgbe_vlan_strip_enable(adapter); + else + ixgbe_vlan_strip_disable(adapter); + if (changed & NETIF_F_RXALL) need_reset = true; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index ddc6a4d19302..dcebd128becf 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -708,6 +708,7 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; u32 incval = 0; + u32 timinca = 0; u32 shift = 0; u32 cycle_speed; unsigned long flags; @@ -730,8 +731,16 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) break; } - /* Bail if the cycle speed didn't change */ - if (adapter->cycle_speed == cycle_speed) + /* + * grab the current TIMINCA value from the register so that it can be + * double checked. If the register value has been cleared, it must be + * reset to the correct value for generating a cyclecounter. If + * TIMINCA is zero, the SYSTIME registers do not increment at all. + */ + timinca = IXGBE_READ_REG(hw, IXGBE_TIMINCA); + + /* Bail if the cycle speed didn't change and TIMINCA is non-zero */ + if (adapter->cycle_speed == cycle_speed && timinca) return; /* disable the SDP clock out */ diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index f69ec4288b10..41e32257a4e8 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -201,6 +201,9 @@ static bool ixgbevf_clean_tx_irq(struct ixgbevf_adapter *adapter, unsigned int i, eop, count = 0; unsigned int total_bytes = 0, total_packets = 0; + if (test_bit(__IXGBEVF_DOWN, &adapter->state)) + return true; + i = tx_ring->next_to_clean; eop = tx_ring->tx_buffer_info[i].next_to_watch; eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); @@ -969,8 +972,6 @@ static irqreturn_t ixgbevf_msix_clean_tx(int irq, void *data) r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues); for (i = 0; i < q_vector->txr_count; i++) { tx_ring = &(adapter->tx_ring[r_idx]); - tx_ring->total_bytes = 0; - tx_ring->total_packets = 0; ixgbevf_clean_tx_irq(adapter, tx_ring); r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues, r_idx + 1); @@ -994,16 +995,6 @@ static irqreturn_t ixgbevf_msix_clean_rx(int irq, void *data) struct ixgbe_hw *hw = &adapter->hw; struct ixgbevf_ring *rx_ring; int r_idx; - int i; - - r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues); - for (i = 0; i < q_vector->rxr_count; i++) { - rx_ring = &(adapter->rx_ring[r_idx]); - rx_ring->total_bytes = 0; - rx_ring->total_packets = 0; - r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues, - r_idx + 1); - } if (!q_vector->rxr_count) return IRQ_HANDLED; diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 04d901d0ff63..f0f06b2bc28b 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -436,7 +436,9 @@ struct mv643xx_eth_private { /* * Hardware-specific parameters. */ +#if defined(CONFIG_HAVE_CLK) struct clk *clk; +#endif unsigned int t_clk; }; @@ -2895,17 +2897,17 @@ static int mv643xx_eth_probe(struct platform_device *pdev) mp->dev = dev; /* - * Get the clk rate, if there is one, otherwise use the default. + * Start with a default rate, and if there is a clock, allow + * it to override the default. */ + mp->t_clk = 133000000; +#if defined(CONFIG_HAVE_CLK) mp->clk = clk_get(&pdev->dev, (pdev->id ? "1" : "0")); if (!IS_ERR(mp->clk)) { clk_prepare_enable(mp->clk); mp->t_clk = clk_get_rate(mp->clk); - } else { - mp->t_clk = 133000000; - printk(KERN_WARNING "Unable to get clock"); } - +#endif set_params(mp, pd); netif_set_real_num_tx_queues(dev, mp->txq_count); netif_set_real_num_rx_queues(dev, mp->rxq_count); @@ -2995,10 +2997,13 @@ static int mv643xx_eth_remove(struct platform_device *pdev) phy_detach(mp->phy); cancel_work_sync(&mp->tx_timeout_task); +#if defined(CONFIG_HAVE_CLK) if (!IS_ERR(mp->clk)) { clk_disable_unprepare(mp->clk); clk_put(mp->clk); } +#endif + free_netdev(mp->dev); platform_set_drvdata(pdev, NULL); diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index cace36f2ab92..28a54451a3e5 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -4381,10 +4381,12 @@ static int sky2_set_features(struct net_device *dev, netdev_features_t features) struct sky2_port *sky2 = netdev_priv(dev); netdev_features_t changed = dev->features ^ features; - if (changed & NETIF_F_RXCSUM) { - bool on = features & NETIF_F_RXCSUM; - sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR), - on ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); + if ((changed & NETIF_F_RXCSUM) && + !(sky2->hw->flags & SKY2_HW_NEW_LE)) { + sky2_write32(sky2->hw, + Q_ADDR(rxqaddr[sky2->port], Q_CSR), + (features & NETIF_F_RXCSUM) + ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); } if (changed & NETIF_F_RXHASH) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 926d8aac941c..073b85b45fc5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -929,15 +929,20 @@ void mlx4_en_free_resources(struct mlx4_en_priv *priv) if (priv->rx_cq[i].buf) mlx4_en_destroy_cq(priv, &priv->rx_cq[i]); } + + if (priv->base_tx_qpn) { + mlx4_qp_release_range(priv->mdev->dev, priv->base_tx_qpn, priv->tx_ring_num); + priv->base_tx_qpn = 0; + } } int mlx4_en_alloc_resources(struct mlx4_en_priv *priv) { struct mlx4_en_port_profile *prof = priv->prof; int i; - int base_tx_qpn, err; + int err; - err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &base_tx_qpn); + err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &priv->base_tx_qpn); if (err) { en_err(priv, "failed reserving range for TX rings\n"); return err; @@ -949,7 +954,7 @@ int mlx4_en_alloc_resources(struct mlx4_en_priv *priv) prof->tx_ring_size, i, TX)) goto err; - if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], base_tx_qpn + i, + if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], priv->base_tx_qpn + i, prof->tx_ring_size, TXBB_SIZE)) goto err; } @@ -969,7 +974,6 @@ int mlx4_en_alloc_resources(struct mlx4_en_priv *priv) err: en_err(priv, "Failed to allocate NIC resources\n"); - mlx4_qp_release_range(priv->mdev->dev, base_tx_qpn, priv->tx_ring_num); return -ENOMEM; } @@ -1204,9 +1208,11 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, en_warn(priv, "Using %d RX rings\n", prof->rx_ring_num); /* Configure port */ + mlx4_en_calc_rx_buf(dev); err = mlx4_SET_PORT_general(mdev->dev, priv->port, - MLX4_EN_MIN_MTU, - 0, 0, 0, 0); + priv->rx_skb_size + ETH_FCS_LEN, + prof->tx_pause, prof->tx_ppp, + prof->rx_pause, prof->rx_ppp); if (err) { en_err(priv, "Failed setting port general configurations " "for port %d, with error %d\n", priv->port, err); diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index ee6f4fe00837..a0313de122de 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1975,6 +1975,8 @@ slave_start: if (err == -EBUSY && (dev->flags & MLX4_FLAG_MSI_X) && !mlx4_is_mfunc(dev)) { dev->flags &= ~MLX4_FLAG_MSI_X; + dev->caps.num_comp_vectors = 1; + dev->caps.comp_pool = 0; pci_disable_msix(pdev); err = mlx4_setup_hca(dev); } diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 6ae350921b1a..225c20d47900 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -495,6 +495,7 @@ struct mlx4_en_priv { int vids[128]; bool wol; struct device *ddev; + int base_tx_qpn; #ifdef CONFIG_MLX4_EN_DCB struct ieee_ets ets; diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index 8d2666fcffd7..083d6715335c 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -946,16 +946,16 @@ static void __lpc_handle_xmit(struct net_device *ndev) /* Update stats */ ndev->stats.tx_packets++; ndev->stats.tx_bytes += skb->len; - - /* Free buffer */ - dev_kfree_skb_irq(skb); } + dev_kfree_skb_irq(skb); txcidx = readl(LPC_ENET_TXCONSUMEINDEX(pldat->net_base)); } - if (netif_queue_stopped(ndev)) - netif_wake_queue(ndev); + if (pldat->num_used_tx_buffs <= ENET_TX_DESC/2) { + if (netif_queue_stopped(ndev)) + netif_wake_queue(ndev); + } } static int __lpc_handle_recv(struct net_device *ndev, int budget) @@ -1320,6 +1320,7 @@ static const struct net_device_ops lpc_netdev_ops = { .ndo_set_rx_mode = lpc_eth_set_multicast_list, .ndo_do_ioctl = lpc_eth_ioctl, .ndo_set_mac_address = lpc_set_mac_address, + .ndo_change_mtu = eth_change_mtu, }; static int lpc_eth_drv_probe(struct platform_device *pdev) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 46e77a2c5121..ad98f4d7919d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -479,7 +479,7 @@ qlcnic_init_pci_info(struct qlcnic_adapter *adapter) for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) { pfn = pci_info[i].id; - if (pfn > QLCNIC_MAX_PCI_FUNC) { + if (pfn >= QLCNIC_MAX_PCI_FUNC) { ret = QL_STATUS_INVALID_PARAM; goto err_eswitch; } diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 9757ce3543a0..d7a04e091101 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3894,6 +3894,7 @@ static void rtl_init_rxcfg(struct rtl8169_private *tp) case RTL_GIGA_MAC_VER_22: case RTL_GIGA_MAC_VER_23: case RTL_GIGA_MAC_VER_24: + case RTL_GIGA_MAC_VER_34: RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST); break; default: @@ -5889,11 +5890,7 @@ static void rtl_slow_event_work(struct rtl8169_private *tp) if (status & LinkChg) __rtl8169_check_link_status(dev, tp, tp->mmio_addr, true); - napi_disable(&tp->napi); - rtl_irq_disable(tp); - - napi_enable(&tp->napi); - napi_schedule(&tp->napi); + rtl_irq_enable_all(tp); } static void rtl_task(struct work_struct *work) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 667169b82526..79bf09b41971 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1011,7 +1011,7 @@ static int sh_eth_txfree(struct net_device *ndev) } /* Packet receive function */ -static int sh_eth_rx(struct net_device *ndev) +static int sh_eth_rx(struct net_device *ndev, u32 intr_status) { struct sh_eth_private *mdp = netdev_priv(ndev); struct sh_eth_rxdesc *rxdesc; @@ -1102,9 +1102,11 @@ static int sh_eth_rx(struct net_device *ndev) /* Restart Rx engine if stopped. */ /* If we don't need to check status, don't. -KDU */ if (!(sh_eth_read(ndev, EDRRR) & EDRRR_R)) { - /* fix the values for the next receiving */ - mdp->cur_rx = mdp->dirty_rx = (sh_eth_read(ndev, RDFAR) - - sh_eth_read(ndev, RDLAR)) >> 4; + /* fix the values for the next receiving if RDE is set */ + if (intr_status & EESR_RDE) + mdp->cur_rx = mdp->dirty_rx = + (sh_eth_read(ndev, RDFAR) - + sh_eth_read(ndev, RDLAR)) >> 4; sh_eth_write(ndev, EDRRR_R, EDRRR); } @@ -1273,7 +1275,7 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev) EESR_RTSF | /* short frame recv */ EESR_PRE | /* PHY-LSI recv error */ EESR_CERF)){ /* recv frame CRC error */ - sh_eth_rx(ndev); + sh_eth_rx(ndev, intr_status); } /* Tx Check */ diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 036428348faa..9f448279e12a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -13,7 +13,7 @@ config STMMAC_ETH if STMMAC_ETH config STMMAC_PLATFORM - tristate "STMMAC platform bus support" + bool "STMMAC Platform bus support" depends on STMMAC_ETH default y ---help--- @@ -26,7 +26,7 @@ config STMMAC_PLATFORM If unsure, say N. config STMMAC_PCI - tristate "STMMAC support on PCI bus (EXPERIMENTAL)" + bool "STMMAC PCI bus support (EXPERIMENTAL)" depends on STMMAC_ETH && PCI && EXPERIMENTAL ---help--- This is to select the Synopsys DWMAC available on PCI devices, diff --git a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c index fb8377da1687..4b785e10f2ed 100644 --- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c +++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c @@ -51,7 +51,7 @@ static unsigned int stmmac_jumbo_frm(void *p, struct sk_buff *skb, int csum) desc->des3 = desc->des2 + BUF_SIZE_4KiB; priv->hw->desc->prepare_tx_desc(desc, 1, bmax, csum); - + wmb(); entry = (++priv->cur_tx) % txsize; desc = priv->dma_tx + entry; @@ -59,6 +59,7 @@ static unsigned int stmmac_jumbo_frm(void *p, struct sk_buff *skb, int csum) len, DMA_TO_DEVICE); desc->des3 = desc->des2 + BUF_SIZE_4KiB; priv->hw->desc->prepare_tx_desc(desc, 0, len, csum); + wmb(); priv->hw->desc->set_tx_owner(desc); priv->tx_skbuff[entry] = NULL; } else { diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index 6b5d060ee9de..dc20c56efc9d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -26,6 +26,7 @@ #include #include #include +#include #include "common.h" #ifdef CONFIG_STMMAC_TIMER #include "stmmac_timer.h" @@ -95,7 +96,6 @@ extern int stmmac_mdio_register(struct net_device *ndev); extern void stmmac_set_ethtool_ops(struct net_device *netdev); extern const struct stmmac_desc_ops enh_desc_ops; extern const struct stmmac_desc_ops ndesc_ops; - int stmmac_freeze(struct net_device *ndev); int stmmac_restore(struct net_device *ndev); int stmmac_resume(struct net_device *ndev); @@ -109,7 +109,7 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, static inline int stmmac_clk_enable(struct stmmac_priv *priv) { if (!IS_ERR(priv->stmmac_clk)) - return clk_enable(priv->stmmac_clk); + return clk_prepare_enable(priv->stmmac_clk); return 0; } @@ -119,7 +119,7 @@ static inline void stmmac_clk_disable(struct stmmac_priv *priv) if (IS_ERR(priv->stmmac_clk)) return; - clk_disable(priv->stmmac_clk); + clk_disable_unprepare(priv->stmmac_clk); } static inline int stmmac_clk_get(struct stmmac_priv *priv) { @@ -143,3 +143,60 @@ static inline int stmmac_clk_get(struct stmmac_priv *priv) return 0; } #endif /* CONFIG_HAVE_CLK */ + + +#ifdef CONFIG_STMMAC_PLATFORM +extern struct platform_driver stmmac_pltfr_driver; +static inline int stmmac_register_platform(void) +{ + int err; + + err = platform_driver_register(&stmmac_pltfr_driver); + if (err) + pr_err("stmmac: failed to register the platform driver\n"); + + return err; +} +static inline void stmmac_unregister_platform(void) +{ + platform_driver_register(&stmmac_pltfr_driver); +} +#else +static inline int stmmac_register_platform(void) +{ + pr_debug("stmmac: do not register the platf driver\n"); + + return -EINVAL; +} +static inline void stmmac_unregister_platform(void) +{ +} +#endif /* CONFIG_STMMAC_PLATFORM */ + +#ifdef CONFIG_STMMAC_PCI +extern struct pci_driver stmmac_pci_driver; +static inline int stmmac_register_pci(void) +{ + int err; + + err = pci_register_driver(&stmmac_pci_driver); + if (err) + pr_err("stmmac: failed to register the PCI driver\n"); + + return err; +} +static inline void stmmac_unregister_pci(void) +{ + pci_unregister_driver(&stmmac_pci_driver); +} +#else +static inline int stmmac_register_pci(void) +{ + pr_debug("stmmac: do not register the PCI driver\n"); + + return -EINVAL; +} +static inline void stmmac_unregister_pci(void) +{ +} +#endif /* CONFIG_STMMAC_PCI */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 70966330f44e..ea3003edde18 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -833,8 +833,9 @@ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv) /** * stmmac_selec_desc_mode - * @dev : device pointer - * Description: select the Enhanced/Alternate or Normal descriptors */ + * @priv : private structure + * Description: select the Enhanced/Alternate or Normal descriptors + */ static void stmmac_selec_desc_mode(struct stmmac_priv *priv) { if (priv->plat->enh_desc) { @@ -1211,6 +1212,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) priv->hw->desc->prepare_tx_desc(desc, 0, len, csum_insertion); wmb(); priv->hw->desc->set_tx_owner(desc); + wmb(); } /* Interrupt on completition only for the latest segment */ @@ -1226,6 +1228,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) /* To avoid raise condition */ priv->hw->desc->set_tx_owner(first); + wmb(); priv->cur_tx++; @@ -1289,6 +1292,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv) } wmb(); priv->hw->desc->set_rx_owner(p + entry); + wmb(); } } @@ -1861,6 +1865,8 @@ static int stmmac_hw_init(struct stmmac_priv *priv) /** * stmmac_dvr_probe * @device: device pointer + * @plat_dat: platform data pointer + * @addr: iobase memory address * Description: this is the main probe function used to * call the alloc_etherdev, allocate the priv structure. */ @@ -2090,6 +2096,34 @@ int stmmac_restore(struct net_device *ndev) } #endif /* CONFIG_PM */ +/* Driver can be configured w/ and w/ both PCI and Platf drivers + * depending on the configuration selected. + */ +static int __init stmmac_init(void) +{ + int err_plt = 0; + int err_pci = 0; + + err_plt = stmmac_register_platform(); + err_pci = stmmac_register_pci(); + + if ((err_pci) && (err_plt)) { + pr_err("stmmac: driver registration failed\n"); + return -EINVAL; + } + + return 0; +} + +static void __exit stmmac_exit(void) +{ + stmmac_unregister_platform(); + stmmac_unregister_pci(); +} + +module_init(stmmac_init); +module_exit(stmmac_exit); + #ifndef MODULE static int __init stmmac_cmdline_opt(char *str) { diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index 58fab5303e9c..cf826e6b6aa1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -179,7 +179,7 @@ static DEFINE_PCI_DEVICE_TABLE(stmmac_id_table) = { MODULE_DEVICE_TABLE(pci, stmmac_id_table); -static struct pci_driver stmmac_driver = { +struct pci_driver stmmac_pci_driver = { .name = STMMAC_RESOURCE_NAME, .id_table = stmmac_id_table, .probe = stmmac_pci_probe, @@ -190,33 +190,6 @@ static struct pci_driver stmmac_driver = { #endif }; -/** - * stmmac_init_module - Entry point for the driver - * Description: This function is the entry point for the driver. - */ -static int __init stmmac_init_module(void) -{ - int ret; - - ret = pci_register_driver(&stmmac_driver); - if (ret < 0) - pr_err("%s: ERROR: driver registration failed\n", __func__); - - return ret; -} - -/** - * stmmac_cleanup_module - Cleanup routine for the driver - * Description: This function is the cleanup routine for the driver. - */ -static void __exit stmmac_cleanup_module(void) -{ - pci_unregister_driver(&stmmac_driver); -} - -module_init(stmmac_init_module); -module_exit(stmmac_cleanup_module); - MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PCI driver"); MODULE_AUTHOR("Rayagond Kokatanur "); MODULE_AUTHOR("Giuseppe Cavallaro "); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 3dd8f0803808..680d2b8dfe27 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -255,7 +255,7 @@ static const struct of_device_id stmmac_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, stmmac_dt_ids); -static struct platform_driver stmmac_driver = { +struct platform_driver stmmac_pltfr_driver = { .probe = stmmac_pltfr_probe, .remove = stmmac_pltfr_remove, .driver = { @@ -266,8 +266,6 @@ static struct platform_driver stmmac_driver = { }, }; -module_platform_driver(stmmac_driver); - MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PLATFORM driver"); MODULE_AUTHOR("Giuseppe Cavallaro "); MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c index 703c8cce2a2c..8c726b7004d3 100644 --- a/drivers/net/ethernet/sun/niu.c +++ b/drivers/net/ethernet/sun/niu.c @@ -3598,7 +3598,6 @@ static int release_tx_packet(struct niu *np, struct tx_ring_info *rp, int idx) static void niu_tx_work(struct niu *np, struct tx_ring_info *rp) { struct netdev_queue *txq; - unsigned int tx_bytes; u16 pkt_cnt, tmp; int cons, index; u64 cs; @@ -3621,18 +3620,12 @@ static void niu_tx_work(struct niu *np, struct tx_ring_info *rp) netif_printk(np, tx_done, KERN_DEBUG, np->dev, "%s() pkt_cnt[%u] cons[%d]\n", __func__, pkt_cnt, cons); - tx_bytes = 0; - tmp = pkt_cnt; - while (tmp--) { - tx_bytes += rp->tx_buffs[cons].skb->len; + while (pkt_cnt--) cons = release_tx_packet(np, rp, cons); - } rp->cons = cons; smp_mb(); - netdev_tx_completed_queue(txq, pkt_cnt, tx_bytes); - out: if (unlikely(netif_tx_queue_stopped(txq) && (niu_tx_avail(rp) > NIU_TX_WAKEUP_THRESH(rp)))) { @@ -4333,7 +4326,6 @@ static void niu_free_channels(struct niu *np) struct tx_ring_info *rp = &np->tx_rings[i]; niu_free_tx_ring_info(np, rp); - netdev_tx_reset_queue(netdev_get_tx_queue(np->dev, i)); } kfree(np->tx_rings); np->tx_rings = NULL; @@ -6739,8 +6731,6 @@ static netdev_tx_t niu_start_xmit(struct sk_buff *skb, prod = NEXT_TX(rp, prod); } - netdev_tx_sent_queue(txq, skb->len); - if (prod < rp->prod) rp->wrap_bit ^= TX_RING_KICK_WRAP; rp->prod = prod; diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index d614c374ed9d..3b5c4571b55e 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/net/ethernet/tile/Kconfig b/drivers/net/ethernet/tile/Kconfig index 2d9218f86bca..098b1c42b393 100644 --- a/drivers/net/ethernet/tile/Kconfig +++ b/drivers/net/ethernet/tile/Kconfig @@ -7,6 +7,8 @@ config TILE_NET depends on TILE default y select CRC32 + select TILE_GXIO_MPIPE if TILEGX + select HIGH_RES_TIMERS if TILEGX ---help--- This is a standard Linux network device driver for the on-chip Tilera Gigabit Ethernet and XAUI interfaces. diff --git a/drivers/net/ethernet/tile/Makefile b/drivers/net/ethernet/tile/Makefile index f634f142cab4..0ef9eefd3211 100644 --- a/drivers/net/ethernet/tile/Makefile +++ b/drivers/net/ethernet/tile/Makefile @@ -4,7 +4,7 @@ obj-$(CONFIG_TILE_NET) += tile_net.o ifdef CONFIG_TILEGX -tile_net-objs := tilegx.o mpipe.o iorpc_mpipe.o dma_queue.o +tile_net-y := tilegx.o else -tile_net-objs := tilepro.o +tile_net-y := tilepro.o endif diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c new file mode 100644 index 000000000000..83b4b388ad49 --- /dev/null +++ b/drivers/net/ethernet/tile/tilegx.c @@ -0,0 +1,1898 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include /* printk() */ +#include /* kmalloc() */ +#include /* error codes */ +#include /* size_t */ +#include +#include +#include +#include /* struct device, and other headers */ +#include /* eth_type_trans */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* Default transmit lockup timeout period, in jiffies. */ +#define TILE_NET_TIMEOUT (5 * HZ) + +/* The maximum number of distinct channels (idesc.channel is 5 bits). */ +#define TILE_NET_CHANNELS 32 + +/* Maximum number of idescs to handle per "poll". */ +#define TILE_NET_BATCH 128 + +/* Maximum number of packets to handle per "poll". */ +#define TILE_NET_WEIGHT 64 + +/* Number of entries in each iqueue. */ +#define IQUEUE_ENTRIES 512 + +/* Number of entries in each equeue. */ +#define EQUEUE_ENTRIES 2048 + +/* Total header bytes per equeue slot. Must be big enough for 2 bytes + * of NET_IP_ALIGN alignment, plus 14 bytes (?) of L2 header, plus up to + * 60 bytes of actual TCP header. We round up to align to cache lines. + */ +#define HEADER_BYTES 128 + +/* Maximum completions per cpu per device (must be a power of two). + * ISSUE: What is the right number here? If this is too small, then + * egress might block waiting for free space in a completions array. + * ISSUE: At the least, allocate these only for initialized echannels. + */ +#define TILE_NET_MAX_COMPS 64 + +#define MAX_FRAGS (MAX_SKB_FRAGS + 1) + +/* Size of completions data to allocate. + * ISSUE: Probably more than needed since we don't use all the channels. + */ +#define COMPS_SIZE (TILE_NET_CHANNELS * sizeof(struct tile_net_comps)) + +/* Size of NotifRing data to allocate. */ +#define NOTIF_RING_SIZE (IQUEUE_ENTRIES * sizeof(gxio_mpipe_idesc_t)) + +/* Timeout to wake the per-device TX timer after we stop the queue. + * We don't want the timeout too short (adds overhead, and might end + * up causing stop/wake/stop/wake cycles) or too long (affects performance). + * For the 10 Gb NIC, 30 usec means roughly 30+ 1500-byte packets. + */ +#define TX_TIMER_DELAY_USEC 30 + +/* Timeout to wake the per-cpu egress timer to free completions. */ +#define EGRESS_TIMER_DELAY_USEC 1000 + +MODULE_AUTHOR("Tilera Corporation"); +MODULE_LICENSE("GPL"); + +/* A "packet fragment" (a chunk of memory). */ +struct frag { + void *buf; + size_t length; +}; + +/* A single completion. */ +struct tile_net_comp { + /* The "complete_count" when the completion will be complete. */ + s64 when; + /* The buffer to be freed when the completion is complete. */ + struct sk_buff *skb; +}; + +/* The completions for a given cpu and echannel. */ +struct tile_net_comps { + /* The completions. */ + struct tile_net_comp comp_queue[TILE_NET_MAX_COMPS]; + /* The number of completions used. */ + unsigned long comp_next; + /* The number of completions freed. */ + unsigned long comp_last; +}; + +/* The transmit wake timer for a given cpu and echannel. */ +struct tile_net_tx_wake { + struct hrtimer timer; + struct net_device *dev; +}; + +/* Info for a specific cpu. */ +struct tile_net_info { + /* The NAPI struct. */ + struct napi_struct napi; + /* Packet queue. */ + gxio_mpipe_iqueue_t iqueue; + /* Our cpu. */ + int my_cpu; + /* True if iqueue is valid. */ + bool has_iqueue; + /* NAPI flags. */ + bool napi_added; + bool napi_enabled; + /* Number of small sk_buffs which must still be provided. */ + unsigned int num_needed_small_buffers; + /* Number of large sk_buffs which must still be provided. */ + unsigned int num_needed_large_buffers; + /* A timer for handling egress completions. */ + struct hrtimer egress_timer; + /* True if "egress_timer" is scheduled. */ + bool egress_timer_scheduled; + /* Comps for each egress channel. */ + struct tile_net_comps *comps_for_echannel[TILE_NET_CHANNELS]; + /* Transmit wake timer for each egress channel. */ + struct tile_net_tx_wake tx_wake[TILE_NET_CHANNELS]; +}; + +/* Info for egress on a particular egress channel. */ +struct tile_net_egress { + /* The "equeue". */ + gxio_mpipe_equeue_t *equeue; + /* The headers for TSO. */ + unsigned char *headers; +}; + +/* Info for a specific device. */ +struct tile_net_priv { + /* Our network device. */ + struct net_device *dev; + /* The primary link. */ + gxio_mpipe_link_t link; + /* The primary channel, if open, else -1. */ + int channel; + /* The "loopify" egress link, if needed. */ + gxio_mpipe_link_t loopify_link; + /* The "loopify" egress channel, if open, else -1. */ + int loopify_channel; + /* The egress channel (channel or loopify_channel). */ + int echannel; + /* Total stats. */ + struct net_device_stats stats; +}; + +/* Egress info, indexed by "priv->echannel" (lazily created as needed). */ +static struct tile_net_egress egress_for_echannel[TILE_NET_CHANNELS]; + +/* Devices currently associated with each channel. + * NOTE: The array entry can become NULL after ifconfig down, but + * we do not free the underlying net_device structures, so it is + * safe to use a pointer after reading it from this array. + */ +static struct net_device *tile_net_devs_for_channel[TILE_NET_CHANNELS]; + +/* A mutex for "tile_net_devs_for_channel". */ +static DEFINE_MUTEX(tile_net_devs_for_channel_mutex); + +/* The per-cpu info. */ +static DEFINE_PER_CPU(struct tile_net_info, per_cpu_info); + +/* The "context" for all devices. */ +static gxio_mpipe_context_t context; + +/* Buffer sizes and mpipe enum codes for buffer stacks. + * See arch/tile/include/gxio/mpipe.h for the set of possible values. + */ +#define BUFFER_SIZE_SMALL_ENUM GXIO_MPIPE_BUFFER_SIZE_128 +#define BUFFER_SIZE_SMALL 128 +#define BUFFER_SIZE_LARGE_ENUM GXIO_MPIPE_BUFFER_SIZE_1664 +#define BUFFER_SIZE_LARGE 1664 + +/* The small/large "buffer stacks". */ +static int small_buffer_stack = -1; +static int large_buffer_stack = -1; + +/* Amount of memory allocated for each buffer stack. */ +static size_t buffer_stack_size; + +/* The actual memory allocated for the buffer stacks. */ +static void *small_buffer_stack_va; +static void *large_buffer_stack_va; + +/* The buckets. */ +static int first_bucket = -1; +static int num_buckets = 1; + +/* The ingress irq. */ +static int ingress_irq = -1; + +/* Text value of tile_net.cpus if passed as a module parameter. */ +static char *network_cpus_string; + +/* The actual cpus in "network_cpus". */ +static struct cpumask network_cpus_map; + +/* If "loopify=LINK" was specified, this is "LINK". */ +static char *loopify_link_name; + +/* If "tile_net.custom" was specified, this is non-NULL. */ +static char *custom_str; + +/* The "tile_net.cpus" argument specifies the cpus that are dedicated + * to handle ingress packets. + * + * The parameter should be in the form "tile_net.cpus=m-n[,x-y]", where + * m, n, x, y are integer numbers that represent the cpus that can be + * neither a dedicated cpu nor a dataplane cpu. + */ +static bool network_cpus_init(void) +{ + char buf[1024]; + int rc; + + if (network_cpus_string == NULL) + return false; + + rc = cpulist_parse_crop(network_cpus_string, &network_cpus_map); + if (rc != 0) { + pr_warn("tile_net.cpus=%s: malformed cpu list\n", + network_cpus_string); + return false; + } + + /* Remove dedicated cpus. */ + cpumask_and(&network_cpus_map, &network_cpus_map, cpu_possible_mask); + + if (cpumask_empty(&network_cpus_map)) { + pr_warn("Ignoring empty tile_net.cpus='%s'.\n", + network_cpus_string); + return false; + } + + cpulist_scnprintf(buf, sizeof(buf), &network_cpus_map); + pr_info("Linux network CPUs: %s\n", buf); + return true; +} + +module_param_named(cpus, network_cpus_string, charp, 0444); +MODULE_PARM_DESC(cpus, "cpulist of cores that handle network interrupts"); + +/* The "tile_net.loopify=LINK" argument causes the named device to + * actually use "loop0" for ingress, and "loop1" for egress. This + * allows an app to sit between the actual link and linux, passing + * (some) packets along to linux, and forwarding (some) packets sent + * out by linux. + */ +module_param_named(loopify, loopify_link_name, charp, 0444); +MODULE_PARM_DESC(loopify, "name the device to use loop0/1 for ingress/egress"); + +/* The "tile_net.custom" argument causes us to ignore the "conventional" + * classifier metadata, in particular, the "l2_offset". + */ +module_param_named(custom, custom_str, charp, 0444); +MODULE_PARM_DESC(custom, "indicates a (heavily) customized classifier"); + +/* Atomically update a statistics field. + * Note that on TILE-Gx, this operation is fire-and-forget on the + * issuing core (single-cycle dispatch) and takes only a few cycles + * longer than a regular store when the request reaches the home cache. + * No expensive bus management overhead is required. + */ +static void tile_net_stats_add(unsigned long value, unsigned long *field) +{ + BUILD_BUG_ON(sizeof(atomic_long_t) != sizeof(unsigned long)); + atomic_long_add(value, (atomic_long_t *)field); +} + +/* Allocate and push a buffer. */ +static bool tile_net_provide_buffer(bool small) +{ + int stack = small ? small_buffer_stack : large_buffer_stack; + const unsigned long buffer_alignment = 128; + struct sk_buff *skb; + int len; + + len = sizeof(struct sk_buff **) + buffer_alignment; + len += (small ? BUFFER_SIZE_SMALL : BUFFER_SIZE_LARGE); + skb = dev_alloc_skb(len); + if (skb == NULL) + return false; + + /* Make room for a back-pointer to 'skb' and guarantee alignment. */ + skb_reserve(skb, sizeof(struct sk_buff **)); + skb_reserve(skb, -(long)skb->data & (buffer_alignment - 1)); + + /* Save a back-pointer to 'skb'. */ + *(struct sk_buff **)(skb->data - sizeof(struct sk_buff **)) = skb; + + /* Make sure "skb" and the back-pointer have been flushed. */ + wmb(); + + gxio_mpipe_push_buffer(&context, stack, + (void *)va_to_tile_io_addr(skb->data)); + + return true; +} + +/* Convert a raw mpipe buffer to its matching skb pointer. */ +static struct sk_buff *mpipe_buf_to_skb(void *va) +{ + /* Acquire the associated "skb". */ + struct sk_buff **skb_ptr = va - sizeof(*skb_ptr); + struct sk_buff *skb = *skb_ptr; + + /* Paranoia. */ + if (skb->data != va) { + /* Panic here since there's a reasonable chance + * that corrupt buffers means generic memory + * corruption, with unpredictable system effects. + */ + panic("Corrupt linux buffer! va=%p, skb=%p, skb->data=%p", + va, skb, skb->data); + } + + return skb; +} + +static void tile_net_pop_all_buffers(int stack) +{ + for (;;) { + tile_io_addr_t addr = + (tile_io_addr_t)gxio_mpipe_pop_buffer(&context, stack); + if (addr == 0) + break; + dev_kfree_skb_irq(mpipe_buf_to_skb(tile_io_addr_to_va(addr))); + } +} + +/* Provide linux buffers to mPIPE. */ +static void tile_net_provide_needed_buffers(void) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + + while (info->num_needed_small_buffers != 0) { + if (!tile_net_provide_buffer(true)) + goto oops; + info->num_needed_small_buffers--; + } + + while (info->num_needed_large_buffers != 0) { + if (!tile_net_provide_buffer(false)) + goto oops; + info->num_needed_large_buffers--; + } + + return; + +oops: + /* Add a description to the page allocation failure dump. */ + pr_notice("Tile %d still needs some buffers\n", info->my_cpu); +} + +static inline bool filter_packet(struct net_device *dev, void *buf) +{ + /* Filter packets received before we're up. */ + if (dev == NULL || !(dev->flags & IFF_UP)) + return true; + + /* Filter out packets that aren't for us. */ + if (!(dev->flags & IFF_PROMISC) && + !is_multicast_ether_addr(buf) && + compare_ether_addr(dev->dev_addr, buf) != 0) + return true; + + return false; +} + +static void tile_net_receive_skb(struct net_device *dev, struct sk_buff *skb, + gxio_mpipe_idesc_t *idesc, unsigned long len) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + struct tile_net_priv *priv = netdev_priv(dev); + + /* Encode the actual packet length. */ + skb_put(skb, len); + + skb->protocol = eth_type_trans(skb, dev); + + /* Acknowledge "good" hardware checksums. */ + if (idesc->cs && idesc->csum_seed_val == 0xFFFF) + skb->ip_summed = CHECKSUM_UNNECESSARY; + + netif_receive_skb(skb); + + /* Update stats. */ + tile_net_stats_add(1, &priv->stats.rx_packets); + tile_net_stats_add(len, &priv->stats.rx_bytes); + + /* Need a new buffer. */ + if (idesc->size == BUFFER_SIZE_SMALL_ENUM) + info->num_needed_small_buffers++; + else + info->num_needed_large_buffers++; +} + +/* Handle a packet. Return true if "processed", false if "filtered". */ +static bool tile_net_handle_packet(gxio_mpipe_idesc_t *idesc) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + struct net_device *dev = tile_net_devs_for_channel[idesc->channel]; + uint8_t l2_offset; + void *va; + void *buf; + unsigned long len; + bool filter; + + /* Drop packets for which no buffer was available. + * NOTE: This happens under heavy load. + */ + if (idesc->be) { + struct tile_net_priv *priv = netdev_priv(dev); + tile_net_stats_add(1, &priv->stats.rx_dropped); + gxio_mpipe_iqueue_consume(&info->iqueue, idesc); + if (net_ratelimit()) + pr_info("Dropping packet (insufficient buffers).\n"); + return false; + } + + /* Get the "l2_offset", if allowed. */ + l2_offset = custom_str ? 0 : gxio_mpipe_idesc_get_l2_offset(idesc); + + /* Get the raw buffer VA (includes "headroom"). */ + va = tile_io_addr_to_va((unsigned long)(long)idesc->va); + + /* Get the actual packet start/length. */ + buf = va + l2_offset; + len = idesc->l2_size - l2_offset; + + /* Point "va" at the raw buffer. */ + va -= NET_IP_ALIGN; + + filter = filter_packet(dev, buf); + if (filter) { + gxio_mpipe_iqueue_drop(&info->iqueue, idesc); + } else { + struct sk_buff *skb = mpipe_buf_to_skb(va); + + /* Skip headroom, and any custom header. */ + skb_reserve(skb, NET_IP_ALIGN + l2_offset); + + tile_net_receive_skb(dev, skb, idesc, len); + } + + gxio_mpipe_iqueue_consume(&info->iqueue, idesc); + return !filter; +} + +/* Handle some packets for the current CPU. + * + * This function handles up to TILE_NET_BATCH idescs per call. + * + * ISSUE: Since we do not provide new buffers until this function is + * complete, we must initially provide enough buffers for each network + * cpu to fill its iqueue and also its batched idescs. + * + * ISSUE: The "rotting packet" race condition occurs if a packet + * arrives after the queue appears to be empty, and before the + * hypervisor interrupt is re-enabled. + */ +static int tile_net_poll(struct napi_struct *napi, int budget) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + unsigned int work = 0; + gxio_mpipe_idesc_t *idesc; + int i, n; + + /* Process packets. */ + while ((n = gxio_mpipe_iqueue_try_peek(&info->iqueue, &idesc)) > 0) { + for (i = 0; i < n; i++) { + if (i == TILE_NET_BATCH) + goto done; + if (tile_net_handle_packet(idesc + i)) { + if (++work >= budget) + goto done; + } + } + } + + /* There are no packets left. */ + napi_complete(&info->napi); + + /* Re-enable hypervisor interrupts. */ + gxio_mpipe_enable_notif_ring_interrupt(&context, info->iqueue.ring); + + /* HACK: Avoid the "rotting packet" problem. */ + if (gxio_mpipe_iqueue_try_peek(&info->iqueue, &idesc) > 0) + napi_schedule(&info->napi); + + /* ISSUE: Handle completions? */ + +done: + tile_net_provide_needed_buffers(); + + return work; +} + +/* Handle an ingress interrupt on the current cpu. */ +static irqreturn_t tile_net_handle_ingress_irq(int irq, void *unused) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + napi_schedule(&info->napi); + return IRQ_HANDLED; +} + +/* Free some completions. This must be called with interrupts blocked. */ +static int tile_net_free_comps(gxio_mpipe_equeue_t *equeue, + struct tile_net_comps *comps, + int limit, bool force_update) +{ + int n = 0; + while (comps->comp_last < comps->comp_next) { + unsigned int cid = comps->comp_last % TILE_NET_MAX_COMPS; + struct tile_net_comp *comp = &comps->comp_queue[cid]; + if (!gxio_mpipe_equeue_is_complete(equeue, comp->when, + force_update || n == 0)) + break; + dev_kfree_skb_irq(comp->skb); + comps->comp_last++; + if (++n == limit) + break; + } + return n; +} + +/* Add a completion. This must be called with interrupts blocked. + * tile_net_equeue_try_reserve() will have ensured a free completion entry. + */ +static void add_comp(gxio_mpipe_equeue_t *equeue, + struct tile_net_comps *comps, + uint64_t when, struct sk_buff *skb) +{ + int cid = comps->comp_next % TILE_NET_MAX_COMPS; + comps->comp_queue[cid].when = when; + comps->comp_queue[cid].skb = skb; + comps->comp_next++; +} + +static void tile_net_schedule_tx_wake_timer(struct net_device *dev) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + struct tile_net_priv *priv = netdev_priv(dev); + + hrtimer_start(&info->tx_wake[priv->echannel].timer, + ktime_set(0, TX_TIMER_DELAY_USEC * 1000UL), + HRTIMER_MODE_REL_PINNED); +} + +static enum hrtimer_restart tile_net_handle_tx_wake_timer(struct hrtimer *t) +{ + struct tile_net_tx_wake *tx_wake = + container_of(t, struct tile_net_tx_wake, timer); + netif_wake_subqueue(tx_wake->dev, smp_processor_id()); + return HRTIMER_NORESTART; +} + +/* Make sure the egress timer is scheduled. */ +static void tile_net_schedule_egress_timer(void) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + + if (!info->egress_timer_scheduled) { + hrtimer_start(&info->egress_timer, + ktime_set(0, EGRESS_TIMER_DELAY_USEC * 1000UL), + HRTIMER_MODE_REL_PINNED); + info->egress_timer_scheduled = true; + } +} + +/* The "function" for "info->egress_timer". + * + * This timer will reschedule itself as long as there are any pending + * completions expected for this tile. + */ +static enum hrtimer_restart tile_net_handle_egress_timer(struct hrtimer *t) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + unsigned long irqflags; + bool pending = false; + int i; + + local_irq_save(irqflags); + + /* The timer is no longer scheduled. */ + info->egress_timer_scheduled = false; + + /* Free all possible comps for this tile. */ + for (i = 0; i < TILE_NET_CHANNELS; i++) { + struct tile_net_egress *egress = &egress_for_echannel[i]; + struct tile_net_comps *comps = info->comps_for_echannel[i]; + if (comps->comp_last >= comps->comp_next) + continue; + tile_net_free_comps(egress->equeue, comps, -1, true); + pending = pending || (comps->comp_last < comps->comp_next); + } + + /* Reschedule timer if needed. */ + if (pending) + tile_net_schedule_egress_timer(); + + local_irq_restore(irqflags); + + return HRTIMER_NORESTART; +} + +/* Helper function for "tile_net_update()". + * "dev" (i.e. arg) is the device being brought up or down, + * or NULL if all devices are now down. + */ +static void tile_net_update_cpu(void *arg) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + struct net_device *dev = arg; + + if (!info->has_iqueue) + return; + + if (dev != NULL) { + if (!info->napi_added) { + netif_napi_add(dev, &info->napi, + tile_net_poll, TILE_NET_WEIGHT); + info->napi_added = true; + } + if (!info->napi_enabled) { + napi_enable(&info->napi); + info->napi_enabled = true; + } + enable_percpu_irq(ingress_irq, 0); + } else { + disable_percpu_irq(ingress_irq); + if (info->napi_enabled) { + napi_disable(&info->napi); + info->napi_enabled = false; + } + /* FIXME: Drain the iqueue. */ + } +} + +/* Helper function for tile_net_open() and tile_net_stop(). + * Always called under tile_net_devs_for_channel_mutex. + */ +static int tile_net_update(struct net_device *dev) +{ + static gxio_mpipe_rules_t rules; /* too big to fit on the stack */ + bool saw_channel = false; + int channel; + int rc; + int cpu; + + gxio_mpipe_rules_init(&rules, &context); + + for (channel = 0; channel < TILE_NET_CHANNELS; channel++) { + if (tile_net_devs_for_channel[channel] == NULL) + continue; + if (!saw_channel) { + saw_channel = true; + gxio_mpipe_rules_begin(&rules, first_bucket, + num_buckets, NULL); + gxio_mpipe_rules_set_headroom(&rules, NET_IP_ALIGN); + } + gxio_mpipe_rules_add_channel(&rules, channel); + } + + /* NOTE: This can fail if there is no classifier. + * ISSUE: Can anything else cause it to fail? + */ + rc = gxio_mpipe_rules_commit(&rules); + if (rc != 0) { + netdev_warn(dev, "gxio_mpipe_rules_commit failed: %d\n", rc); + return -EIO; + } + + /* Update all cpus, sequentially (to protect "netif_napi_add()"). */ + for_each_online_cpu(cpu) + smp_call_function_single(cpu, tile_net_update_cpu, + (saw_channel ? dev : NULL), 1); + + /* HACK: Allow packets to flow in the simulator. */ + if (saw_channel) + sim_enable_mpipe_links(0, -1); + + return 0; +} + +/* Allocate and initialize mpipe buffer stacks, and register them in + * the mPIPE TLBs, for both small and large packet sizes. + * This routine supports tile_net_init_mpipe(), below. + */ +static int init_buffer_stacks(struct net_device *dev, int num_buffers) +{ + pte_t hash_pte = pte_set_home((pte_t) { 0 }, PAGE_HOME_HASH); + int rc; + + /* Compute stack bytes; we round up to 64KB and then use + * alloc_pages() so we get the required 64KB alignment as well. + */ + buffer_stack_size = + ALIGN(gxio_mpipe_calc_buffer_stack_bytes(num_buffers), + 64 * 1024); + + /* Allocate two buffer stack indices. */ + rc = gxio_mpipe_alloc_buffer_stacks(&context, 2, 0, 0); + if (rc < 0) { + netdev_err(dev, "gxio_mpipe_alloc_buffer_stacks failed: %d\n", + rc); + return rc; + } + small_buffer_stack = rc; + large_buffer_stack = rc + 1; + + /* Allocate the small memory stack. */ + small_buffer_stack_va = + alloc_pages_exact(buffer_stack_size, GFP_KERNEL); + if (small_buffer_stack_va == NULL) { + netdev_err(dev, + "Could not alloc %zd bytes for buffer stacks\n", + buffer_stack_size); + return -ENOMEM; + } + rc = gxio_mpipe_init_buffer_stack(&context, small_buffer_stack, + BUFFER_SIZE_SMALL_ENUM, + small_buffer_stack_va, + buffer_stack_size, 0); + if (rc != 0) { + netdev_err(dev, "gxio_mpipe_init_buffer_stack: %d\n", rc); + return rc; + } + rc = gxio_mpipe_register_client_memory(&context, small_buffer_stack, + hash_pte, 0); + if (rc != 0) { + netdev_err(dev, + "gxio_mpipe_register_buffer_memory failed: %d\n", + rc); + return rc; + } + + /* Allocate the large buffer stack. */ + large_buffer_stack_va = + alloc_pages_exact(buffer_stack_size, GFP_KERNEL); + if (large_buffer_stack_va == NULL) { + netdev_err(dev, + "Could not alloc %zd bytes for buffer stacks\n", + buffer_stack_size); + return -ENOMEM; + } + rc = gxio_mpipe_init_buffer_stack(&context, large_buffer_stack, + BUFFER_SIZE_LARGE_ENUM, + large_buffer_stack_va, + buffer_stack_size, 0); + if (rc != 0) { + netdev_err(dev, "gxio_mpipe_init_buffer_stack failed: %d\n", + rc); + return rc; + } + rc = gxio_mpipe_register_client_memory(&context, large_buffer_stack, + hash_pte, 0); + if (rc != 0) { + netdev_err(dev, + "gxio_mpipe_register_buffer_memory failed: %d\n", + rc); + return rc; + } + + return 0; +} + +/* Allocate per-cpu resources (memory for completions and idescs). + * This routine supports tile_net_init_mpipe(), below. + */ +static int alloc_percpu_mpipe_resources(struct net_device *dev, + int cpu, int ring) +{ + struct tile_net_info *info = &per_cpu(per_cpu_info, cpu); + int order, i, rc; + struct page *page; + void *addr; + + /* Allocate the "comps". */ + order = get_order(COMPS_SIZE); + page = homecache_alloc_pages(GFP_KERNEL, order, cpu); + if (page == NULL) { + netdev_err(dev, "Failed to alloc %zd bytes comps memory\n", + COMPS_SIZE); + return -ENOMEM; + } + addr = pfn_to_kaddr(page_to_pfn(page)); + memset(addr, 0, COMPS_SIZE); + for (i = 0; i < TILE_NET_CHANNELS; i++) + info->comps_for_echannel[i] = + addr + i * sizeof(struct tile_net_comps); + + /* If this is a network cpu, create an iqueue. */ + if (cpu_isset(cpu, network_cpus_map)) { + order = get_order(NOTIF_RING_SIZE); + page = homecache_alloc_pages(GFP_KERNEL, order, cpu); + if (page == NULL) { + netdev_err(dev, + "Failed to alloc %zd bytes iqueue memory\n", + NOTIF_RING_SIZE); + return -ENOMEM; + } + addr = pfn_to_kaddr(page_to_pfn(page)); + rc = gxio_mpipe_iqueue_init(&info->iqueue, &context, ring++, + addr, NOTIF_RING_SIZE, 0); + if (rc < 0) { + netdev_err(dev, + "gxio_mpipe_iqueue_init failed: %d\n", rc); + return rc; + } + info->has_iqueue = true; + } + + return ring; +} + +/* Initialize NotifGroup and buckets. + * This routine supports tile_net_init_mpipe(), below. + */ +static int init_notif_group_and_buckets(struct net_device *dev, + int ring, int network_cpus_count) +{ + int group, rc; + + /* Allocate one NotifGroup. */ + rc = gxio_mpipe_alloc_notif_groups(&context, 1, 0, 0); + if (rc < 0) { + netdev_err(dev, "gxio_mpipe_alloc_notif_groups failed: %d\n", + rc); + return rc; + } + group = rc; + + /* Initialize global num_buckets value. */ + if (network_cpus_count > 4) + num_buckets = 256; + else if (network_cpus_count > 1) + num_buckets = 16; + + /* Allocate some buckets, and set global first_bucket value. */ + rc = gxio_mpipe_alloc_buckets(&context, num_buckets, 0, 0); + if (rc < 0) { + netdev_err(dev, "gxio_mpipe_alloc_buckets failed: %d\n", rc); + return rc; + } + first_bucket = rc; + + /* Init group and buckets. */ + rc = gxio_mpipe_init_notif_group_and_buckets( + &context, group, ring, network_cpus_count, + first_bucket, num_buckets, + GXIO_MPIPE_BUCKET_STICKY_FLOW_LOCALITY); + if (rc != 0) { + netdev_err( + dev, + "gxio_mpipe_init_notif_group_and_buckets failed: %d\n", + rc); + return rc; + } + + return 0; +} + +/* Create an irq and register it, then activate the irq and request + * interrupts on all cores. Note that "ingress_irq" being initialized + * is how we know not to call tile_net_init_mpipe() again. + * This routine supports tile_net_init_mpipe(), below. + */ +static int tile_net_setup_interrupts(struct net_device *dev) +{ + int cpu, rc; + + rc = create_irq(); + if (rc < 0) { + netdev_err(dev, "create_irq failed: %d\n", rc); + return rc; + } + ingress_irq = rc; + tile_irq_activate(ingress_irq, TILE_IRQ_PERCPU); + rc = request_irq(ingress_irq, tile_net_handle_ingress_irq, + 0, NULL, NULL); + if (rc != 0) { + netdev_err(dev, "request_irq failed: %d\n", rc); + destroy_irq(ingress_irq); + ingress_irq = -1; + return rc; + } + + for_each_online_cpu(cpu) { + struct tile_net_info *info = &per_cpu(per_cpu_info, cpu); + if (info->has_iqueue) { + gxio_mpipe_request_notif_ring_interrupt( + &context, cpu_x(cpu), cpu_y(cpu), + 1, ingress_irq, info->iqueue.ring); + } + } + + return 0; +} + +/* Undo any state set up partially by a failed call to tile_net_init_mpipe. */ +static void tile_net_init_mpipe_fail(void) +{ + int cpu; + + /* Do cleanups that require the mpipe context first. */ + if (small_buffer_stack >= 0) + tile_net_pop_all_buffers(small_buffer_stack); + if (large_buffer_stack >= 0) + tile_net_pop_all_buffers(large_buffer_stack); + + /* Destroy mpipe context so the hardware no longer owns any memory. */ + gxio_mpipe_destroy(&context); + + for_each_online_cpu(cpu) { + struct tile_net_info *info = &per_cpu(per_cpu_info, cpu); + free_pages((unsigned long)(info->comps_for_echannel[0]), + get_order(COMPS_SIZE)); + info->comps_for_echannel[0] = NULL; + free_pages((unsigned long)(info->iqueue.idescs), + get_order(NOTIF_RING_SIZE)); + info->iqueue.idescs = NULL; + } + + if (small_buffer_stack_va) + free_pages_exact(small_buffer_stack_va, buffer_stack_size); + if (large_buffer_stack_va) + free_pages_exact(large_buffer_stack_va, buffer_stack_size); + + small_buffer_stack_va = NULL; + large_buffer_stack_va = NULL; + large_buffer_stack = -1; + small_buffer_stack = -1; + first_bucket = -1; +} + +/* The first time any tilegx network device is opened, we initialize + * the global mpipe state. If this step fails, we fail to open the + * device, but if it succeeds, we never need to do it again, and since + * tile_net can't be unloaded, we never undo it. + * + * Note that some resources in this path (buffer stack indices, + * bindings from init_buffer_stack, etc.) are hypervisor resources + * that are freed implicitly by gxio_mpipe_destroy(). + */ +static int tile_net_init_mpipe(struct net_device *dev) +{ + int i, num_buffers, rc; + int cpu; + int first_ring, ring; + int network_cpus_count = cpus_weight(network_cpus_map); + + if (!hash_default) { + netdev_err(dev, "Networking requires hash_default!\n"); + return -EIO; + } + + rc = gxio_mpipe_init(&context, 0); + if (rc != 0) { + netdev_err(dev, "gxio_mpipe_init failed: %d\n", rc); + return -EIO; + } + + /* Set up the buffer stacks. */ + num_buffers = + network_cpus_count * (IQUEUE_ENTRIES + TILE_NET_BATCH); + rc = init_buffer_stacks(dev, num_buffers); + if (rc != 0) + goto fail; + + /* Provide initial buffers. */ + rc = -ENOMEM; + for (i = 0; i < num_buffers; i++) { + if (!tile_net_provide_buffer(true)) { + netdev_err(dev, "Cannot allocate initial sk_bufs!\n"); + goto fail; + } + } + for (i = 0; i < num_buffers; i++) { + if (!tile_net_provide_buffer(false)) { + netdev_err(dev, "Cannot allocate initial sk_bufs!\n"); + goto fail; + } + } + + /* Allocate one NotifRing for each network cpu. */ + rc = gxio_mpipe_alloc_notif_rings(&context, network_cpus_count, 0, 0); + if (rc < 0) { + netdev_err(dev, "gxio_mpipe_alloc_notif_rings failed %d\n", + rc); + goto fail; + } + + /* Init NotifRings per-cpu. */ + first_ring = rc; + ring = first_ring; + for_each_online_cpu(cpu) { + rc = alloc_percpu_mpipe_resources(dev, cpu, ring); + if (rc < 0) + goto fail; + ring = rc; + } + + /* Initialize NotifGroup and buckets. */ + rc = init_notif_group_and_buckets(dev, first_ring, network_cpus_count); + if (rc != 0) + goto fail; + + /* Create and enable interrupts. */ + rc = tile_net_setup_interrupts(dev); + if (rc != 0) + goto fail; + + return 0; + +fail: + tile_net_init_mpipe_fail(); + return rc; +} + +/* Create persistent egress info for a given egress channel. + * Note that this may be shared between, say, "gbe0" and "xgbe0". + * ISSUE: Defer header allocation until TSO is actually needed? + */ +static int tile_net_init_egress(struct net_device *dev, int echannel) +{ + struct page *headers_page, *edescs_page, *equeue_page; + gxio_mpipe_edesc_t *edescs; + gxio_mpipe_equeue_t *equeue; + unsigned char *headers; + int headers_order, edescs_order, equeue_order; + size_t edescs_size; + int edma; + int rc = -ENOMEM; + + /* Only initialize once. */ + if (egress_for_echannel[echannel].equeue != NULL) + return 0; + + /* Allocate memory for the "headers". */ + headers_order = get_order(EQUEUE_ENTRIES * HEADER_BYTES); + headers_page = alloc_pages(GFP_KERNEL, headers_order); + if (headers_page == NULL) { + netdev_warn(dev, + "Could not alloc %zd bytes for TSO headers.\n", + PAGE_SIZE << headers_order); + goto fail; + } + headers = pfn_to_kaddr(page_to_pfn(headers_page)); + + /* Allocate memory for the "edescs". */ + edescs_size = EQUEUE_ENTRIES * sizeof(*edescs); + edescs_order = get_order(edescs_size); + edescs_page = alloc_pages(GFP_KERNEL, edescs_order); + if (edescs_page == NULL) { + netdev_warn(dev, + "Could not alloc %zd bytes for eDMA ring.\n", + edescs_size); + goto fail_headers; + } + edescs = pfn_to_kaddr(page_to_pfn(edescs_page)); + + /* Allocate memory for the "equeue". */ + equeue_order = get_order(sizeof(*equeue)); + equeue_page = alloc_pages(GFP_KERNEL, equeue_order); + if (equeue_page == NULL) { + netdev_warn(dev, + "Could not alloc %zd bytes for equeue info.\n", + PAGE_SIZE << equeue_order); + goto fail_edescs; + } + equeue = pfn_to_kaddr(page_to_pfn(equeue_page)); + + /* Allocate an edma ring. Note that in practice this can't + * fail, which is good, because we will leak an edma ring if so. + */ + rc = gxio_mpipe_alloc_edma_rings(&context, 1, 0, 0); + if (rc < 0) { + netdev_warn(dev, "gxio_mpipe_alloc_edma_rings failed: %d\n", + rc); + goto fail_equeue; + } + edma = rc; + + /* Initialize the equeue. */ + rc = gxio_mpipe_equeue_init(equeue, &context, edma, echannel, + edescs, edescs_size, 0); + if (rc != 0) { + netdev_err(dev, "gxio_mpipe_equeue_init failed: %d\n", rc); + goto fail_equeue; + } + + /* Done. */ + egress_for_echannel[echannel].equeue = equeue; + egress_for_echannel[echannel].headers = headers; + return 0; + +fail_equeue: + __free_pages(equeue_page, equeue_order); + +fail_edescs: + __free_pages(edescs_page, edescs_order); + +fail_headers: + __free_pages(headers_page, headers_order); + +fail: + return rc; +} + +/* Return channel number for a newly-opened link. */ +static int tile_net_link_open(struct net_device *dev, gxio_mpipe_link_t *link, + const char *link_name) +{ + int rc = gxio_mpipe_link_open(link, &context, link_name, 0); + if (rc < 0) { + netdev_err(dev, "Failed to open '%s'\n", link_name); + return rc; + } + rc = gxio_mpipe_link_channel(link); + if (rc < 0 || rc >= TILE_NET_CHANNELS) { + netdev_err(dev, "gxio_mpipe_link_channel bad value: %d\n", rc); + gxio_mpipe_link_close(link); + return -EINVAL; + } + return rc; +} + +/* Help the kernel activate the given network interface. */ +static int tile_net_open(struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + int cpu, rc; + + mutex_lock(&tile_net_devs_for_channel_mutex); + + /* Do one-time initialization the first time any device is opened. */ + if (ingress_irq < 0) { + rc = tile_net_init_mpipe(dev); + if (rc != 0) + goto fail; + } + + /* Determine if this is the "loopify" device. */ + if (unlikely((loopify_link_name != NULL) && + !strcmp(dev->name, loopify_link_name))) { + rc = tile_net_link_open(dev, &priv->link, "loop0"); + if (rc < 0) + goto fail; + priv->channel = rc; + rc = tile_net_link_open(dev, &priv->loopify_link, "loop1"); + if (rc < 0) + goto fail; + priv->loopify_channel = rc; + priv->echannel = rc; + } else { + rc = tile_net_link_open(dev, &priv->link, dev->name); + if (rc < 0) + goto fail; + priv->channel = rc; + priv->echannel = rc; + } + + /* Initialize egress info (if needed). Once ever, per echannel. */ + rc = tile_net_init_egress(dev, priv->echannel); + if (rc != 0) + goto fail; + + tile_net_devs_for_channel[priv->channel] = dev; + + rc = tile_net_update(dev); + if (rc != 0) + goto fail; + + mutex_unlock(&tile_net_devs_for_channel_mutex); + + /* Initialize the transmit wake timer for this device for each cpu. */ + for_each_online_cpu(cpu) { + struct tile_net_info *info = &per_cpu(per_cpu_info, cpu); + struct tile_net_tx_wake *tx_wake = + &info->tx_wake[priv->echannel]; + + hrtimer_init(&tx_wake->timer, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + tx_wake->timer.function = tile_net_handle_tx_wake_timer; + tx_wake->dev = dev; + } + + for_each_online_cpu(cpu) + netif_start_subqueue(dev, cpu); + netif_carrier_on(dev); + return 0; + +fail: + if (priv->loopify_channel >= 0) { + if (gxio_mpipe_link_close(&priv->loopify_link) != 0) + netdev_warn(dev, "Failed to close loopify link!\n"); + priv->loopify_channel = -1; + } + if (priv->channel >= 0) { + if (gxio_mpipe_link_close(&priv->link) != 0) + netdev_warn(dev, "Failed to close link!\n"); + priv->channel = -1; + } + priv->echannel = -1; + tile_net_devs_for_channel[priv->channel] = NULL; + mutex_unlock(&tile_net_devs_for_channel_mutex); + + /* Don't return raw gxio error codes to generic Linux. */ + return (rc > -512) ? rc : -EIO; +} + +/* Help the kernel deactivate the given network interface. */ +static int tile_net_stop(struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + int cpu; + + for_each_online_cpu(cpu) { + struct tile_net_info *info = &per_cpu(per_cpu_info, cpu); + struct tile_net_tx_wake *tx_wake = + &info->tx_wake[priv->echannel]; + + hrtimer_cancel(&tx_wake->timer); + netif_stop_subqueue(dev, cpu); + } + + mutex_lock(&tile_net_devs_for_channel_mutex); + tile_net_devs_for_channel[priv->channel] = NULL; + (void)tile_net_update(dev); + if (priv->loopify_channel >= 0) { + if (gxio_mpipe_link_close(&priv->loopify_link) != 0) + netdev_warn(dev, "Failed to close loopify link!\n"); + priv->loopify_channel = -1; + } + if (priv->channel >= 0) { + if (gxio_mpipe_link_close(&priv->link) != 0) + netdev_warn(dev, "Failed to close link!\n"); + priv->channel = -1; + } + priv->echannel = -1; + mutex_unlock(&tile_net_devs_for_channel_mutex); + + return 0; +} + +/* Determine the VA for a fragment. */ +static inline void *tile_net_frag_buf(skb_frag_t *f) +{ + unsigned long pfn = page_to_pfn(skb_frag_page(f)); + return pfn_to_kaddr(pfn) + f->page_offset; +} + +/* Acquire a completion entry and an egress slot, or if we can't, + * stop the queue and schedule the tx_wake timer. + */ +static s64 tile_net_equeue_try_reserve(struct net_device *dev, + struct tile_net_comps *comps, + gxio_mpipe_equeue_t *equeue, + int num_edescs) +{ + /* Try to acquire a completion entry. */ + if (comps->comp_next - comps->comp_last < TILE_NET_MAX_COMPS - 1 || + tile_net_free_comps(equeue, comps, 32, false) != 0) { + + /* Try to acquire an egress slot. */ + s64 slot = gxio_mpipe_equeue_try_reserve(equeue, num_edescs); + if (slot >= 0) + return slot; + + /* Freeing some completions gives the equeue time to drain. */ + tile_net_free_comps(equeue, comps, TILE_NET_MAX_COMPS, false); + + slot = gxio_mpipe_equeue_try_reserve(equeue, num_edescs); + if (slot >= 0) + return slot; + } + + /* Still nothing; give up and stop the queue for a short while. */ + netif_stop_subqueue(dev, smp_processor_id()); + tile_net_schedule_tx_wake_timer(dev); + return -1; +} + +/* Determine how many edesc's are needed for TSO. + * + * Sometimes, if "sendfile()" requires copying, we will be called with + * "data" containing the header and payload, with "frags" being empty. + * Sometimes, for example when using NFS over TCP, a single segment can + * span 3 fragments. This requires special care. + */ +static int tso_count_edescs(struct sk_buff *skb) +{ + struct skb_shared_info *sh = skb_shinfo(skb); + unsigned int data_len = skb->data_len; + unsigned int p_len = sh->gso_size; + long f_id = -1; /* id of the current fragment */ + long f_size = -1; /* size of the current fragment */ + long f_used = -1; /* bytes used from the current fragment */ + long n; /* size of the current piece of payload */ + int num_edescs = 0; + int segment; + + for (segment = 0; segment < sh->gso_segs; segment++) { + + unsigned int p_used = 0; + + /* One edesc for header and for each piece of the payload. */ + for (num_edescs++; p_used < p_len; num_edescs++) { + + /* Advance as needed. */ + while (f_used >= f_size) { + f_id++; + f_size = sh->frags[f_id].size; + f_used = 0; + } + + /* Use bytes from the current fragment. */ + n = p_len - p_used; + if (n > f_size - f_used) + n = f_size - f_used; + f_used += n; + p_used += n; + } + + /* The last segment may be less than gso_size. */ + data_len -= p_len; + if (data_len < p_len) + p_len = data_len; + } + + return num_edescs; +} + +/* Prepare modified copies of the skbuff headers. + * FIXME: add support for IPv6. + */ +static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers, + s64 slot) +{ + struct skb_shared_info *sh = skb_shinfo(skb); + struct iphdr *ih; + struct tcphdr *th; + unsigned int data_len = skb->data_len; + unsigned char *data = skb->data; + unsigned int ih_off, th_off, sh_len, p_len; + unsigned int isum_seed, tsum_seed, id, seq; + long f_id = -1; /* id of the current fragment */ + long f_size = -1; /* size of the current fragment */ + long f_used = -1; /* bytes used from the current fragment */ + long n; /* size of the current piece of payload */ + int segment; + + /* Locate original headers and compute various lengths. */ + ih = ip_hdr(skb); + th = tcp_hdr(skb); + ih_off = skb_network_offset(skb); + th_off = skb_transport_offset(skb); + sh_len = th_off + tcp_hdrlen(skb); + p_len = sh->gso_size; + + /* Set up seed values for IP and TCP csum and initialize id and seq. */ + isum_seed = ((0xFFFF - ih->check) + + (0xFFFF - ih->tot_len) + + (0xFFFF - ih->id)); + tsum_seed = th->check + (0xFFFF ^ htons(skb->len)); + id = ntohs(ih->id); + seq = ntohl(th->seq); + + /* Prepare all the headers. */ + for (segment = 0; segment < sh->gso_segs; segment++) { + unsigned char *buf; + unsigned int p_used = 0; + + /* Copy to the header memory for this segment. */ + buf = headers + (slot % EQUEUE_ENTRIES) * HEADER_BYTES + + NET_IP_ALIGN; + memcpy(buf, data, sh_len); + + /* Update copied ip header. */ + ih = (struct iphdr *)(buf + ih_off); + ih->tot_len = htons(sh_len + p_len - ih_off); + ih->id = htons(id); + ih->check = csum_long(isum_seed + ih->tot_len + + ih->id) ^ 0xffff; + + /* Update copied tcp header. */ + th = (struct tcphdr *)(buf + th_off); + th->seq = htonl(seq); + th->check = csum_long(tsum_seed + htons(sh_len + p_len)); + if (segment != sh->gso_segs - 1) { + th->fin = 0; + th->psh = 0; + } + + /* Skip past the header. */ + slot++; + + /* Skip past the payload. */ + while (p_used < p_len) { + + /* Advance as needed. */ + while (f_used >= f_size) { + f_id++; + f_size = sh->frags[f_id].size; + f_used = 0; + } + + /* Use bytes from the current fragment. */ + n = p_len - p_used; + if (n > f_size - f_used) + n = f_size - f_used; + f_used += n; + p_used += n; + + slot++; + } + + id++; + seq += p_len; + + /* The last segment may be less than gso_size. */ + data_len -= p_len; + if (data_len < p_len) + p_len = data_len; + } + + /* Flush the headers so they are ready for hardware DMA. */ + wmb(); +} + +/* Pass all the data to mpipe for egress. */ +static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue, + struct sk_buff *skb, unsigned char *headers, s64 slot) +{ + struct tile_net_priv *priv = netdev_priv(dev); + struct skb_shared_info *sh = skb_shinfo(skb); + unsigned int data_len = skb->data_len; + unsigned int p_len = sh->gso_size; + gxio_mpipe_edesc_t edesc_head = { { 0 } }; + gxio_mpipe_edesc_t edesc_body = { { 0 } }; + long f_id = -1; /* id of the current fragment */ + long f_size = -1; /* size of the current fragment */ + long f_used = -1; /* bytes used from the current fragment */ + long n; /* size of the current piece of payload */ + unsigned long tx_packets = 0, tx_bytes = 0; + unsigned int csum_start, sh_len; + int segment; + + /* Prepare to egress the headers: set up header edesc. */ + csum_start = skb_checksum_start_offset(skb); + sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + edesc_head.csum = 1; + edesc_head.csum_start = csum_start; + edesc_head.csum_dest = csum_start + skb->csum_offset; + edesc_head.xfer_size = sh_len; + + /* This is only used to specify the TLB. */ + edesc_head.stack_idx = large_buffer_stack; + edesc_body.stack_idx = large_buffer_stack; + + /* Egress all the edescs. */ + for (segment = 0; segment < sh->gso_segs; segment++) { + void *va; + unsigned char *buf; + unsigned int p_used = 0; + + /* Egress the header. */ + buf = headers + (slot % EQUEUE_ENTRIES) * HEADER_BYTES + + NET_IP_ALIGN; + edesc_head.va = va_to_tile_io_addr(buf); + gxio_mpipe_equeue_put_at(equeue, edesc_head, slot); + slot++; + + /* Egress the payload. */ + while (p_used < p_len) { + + /* Advance as needed. */ + while (f_used >= f_size) { + f_id++; + f_size = sh->frags[f_id].size; + f_used = 0; + } + + va = tile_net_frag_buf(&sh->frags[f_id]) + f_used; + + /* Use bytes from the current fragment. */ + n = p_len - p_used; + if (n > f_size - f_used) + n = f_size - f_used; + f_used += n; + p_used += n; + + /* Egress a piece of the payload. */ + edesc_body.va = va_to_tile_io_addr(va); + edesc_body.xfer_size = n; + edesc_body.bound = !(p_used < p_len); + gxio_mpipe_equeue_put_at(equeue, edesc_body, slot); + slot++; + } + + tx_packets++; + tx_bytes += sh_len + p_len; + + /* The last segment may be less than gso_size. */ + data_len -= p_len; + if (data_len < p_len) + p_len = data_len; + } + + /* Update stats. */ + tile_net_stats_add(tx_packets, &priv->stats.tx_packets); + tile_net_stats_add(tx_bytes, &priv->stats.tx_bytes); +} + +/* Do "TSO" handling for egress. + * + * Normally drivers set NETIF_F_TSO only to support hardware TSO; + * otherwise the stack uses scatter-gather to implement GSO in software. + * On our testing, enabling GSO support (via NETIF_F_SG) drops network + * performance down to around 7.5 Gbps on the 10G interfaces, although + * also dropping cpu utilization way down, to under 8%. But + * implementing "TSO" in the driver brings performance back up to line + * rate, while dropping cpu usage even further, to less than 4%. In + * practice, profiling of GSO shows that skb_segment() is what causes + * the performance overheads; we benefit in the driver from using + * preallocated memory to duplicate the TCP/IP headers. + */ +static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + struct tile_net_priv *priv = netdev_priv(dev); + int channel = priv->echannel; + struct tile_net_egress *egress = &egress_for_echannel[channel]; + struct tile_net_comps *comps = info->comps_for_echannel[channel]; + gxio_mpipe_equeue_t *equeue = egress->equeue; + unsigned long irqflags; + int num_edescs; + s64 slot; + + /* Determine how many mpipe edesc's are needed. */ + num_edescs = tso_count_edescs(skb); + + local_irq_save(irqflags); + + /* Try to acquire a completion entry and an egress slot. */ + slot = tile_net_equeue_try_reserve(dev, comps, equeue, num_edescs); + if (slot < 0) { + local_irq_restore(irqflags); + return NETDEV_TX_BUSY; + } + + /* Set up copies of header data properly. */ + tso_headers_prepare(skb, egress->headers, slot); + + /* Actually pass the data to the network hardware. */ + tso_egress(dev, equeue, skb, egress->headers, slot); + + /* Add a completion record. */ + add_comp(equeue, comps, slot + num_edescs - 1, skb); + + local_irq_restore(irqflags); + + /* Make sure the egress timer is scheduled. */ + tile_net_schedule_egress_timer(); + + return NETDEV_TX_OK; +} + +/* Analyze the body and frags for a transmit request. */ +static unsigned int tile_net_tx_frags(struct frag *frags, + struct sk_buff *skb, + void *b_data, unsigned int b_len) +{ + unsigned int i, n = 0; + + struct skb_shared_info *sh = skb_shinfo(skb); + + if (b_len != 0) { + frags[n].buf = b_data; + frags[n++].length = b_len; + } + + for (i = 0; i < sh->nr_frags; i++) { + skb_frag_t *f = &sh->frags[i]; + frags[n].buf = tile_net_frag_buf(f); + frags[n++].length = skb_frag_size(f); + } + + return n; +} + +/* Help the kernel transmit a packet. */ +static int tile_net_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + struct tile_net_priv *priv = netdev_priv(dev); + struct tile_net_egress *egress = &egress_for_echannel[priv->echannel]; + gxio_mpipe_equeue_t *equeue = egress->equeue; + struct tile_net_comps *comps = + info->comps_for_echannel[priv->echannel]; + unsigned int len = skb->len; + unsigned char *data = skb->data; + unsigned int num_edescs; + struct frag frags[MAX_FRAGS]; + gxio_mpipe_edesc_t edescs[MAX_FRAGS]; + unsigned long irqflags; + gxio_mpipe_edesc_t edesc = { { 0 } }; + unsigned int i; + s64 slot; + + if (skb_is_gso(skb)) + return tile_net_tx_tso(skb, dev); + + num_edescs = tile_net_tx_frags(frags, skb, data, skb_headlen(skb)); + + /* This is only used to specify the TLB. */ + edesc.stack_idx = large_buffer_stack; + + /* Prepare the edescs. */ + for (i = 0; i < num_edescs; i++) { + edesc.xfer_size = frags[i].length; + edesc.va = va_to_tile_io_addr(frags[i].buf); + edescs[i] = edesc; + } + + /* Mark the final edesc. */ + edescs[num_edescs - 1].bound = 1; + + /* Add checksum info to the initial edesc, if needed. */ + if (skb->ip_summed == CHECKSUM_PARTIAL) { + unsigned int csum_start = skb_checksum_start_offset(skb); + edescs[0].csum = 1; + edescs[0].csum_start = csum_start; + edescs[0].csum_dest = csum_start + skb->csum_offset; + } + + local_irq_save(irqflags); + + /* Try to acquire a completion entry and an egress slot. */ + slot = tile_net_equeue_try_reserve(dev, comps, equeue, num_edescs); + if (slot < 0) { + local_irq_restore(irqflags); + return NETDEV_TX_BUSY; + } + + for (i = 0; i < num_edescs; i++) + gxio_mpipe_equeue_put_at(equeue, edescs[i], slot++); + + /* Add a completion record. */ + add_comp(equeue, comps, slot - 1, skb); + + /* NOTE: Use ETH_ZLEN for short packets (e.g. 42 < 60). */ + tile_net_stats_add(1, &priv->stats.tx_packets); + tile_net_stats_add(max_t(unsigned int, len, ETH_ZLEN), + &priv->stats.tx_bytes); + + local_irq_restore(irqflags); + + /* Make sure the egress timer is scheduled. */ + tile_net_schedule_egress_timer(); + + return NETDEV_TX_OK; +} + +/* Return subqueue id on this core (one per core). */ +static u16 tile_net_select_queue(struct net_device *dev, struct sk_buff *skb) +{ + return smp_processor_id(); +} + +/* Deal with a transmit timeout. */ +static void tile_net_tx_timeout(struct net_device *dev) +{ + int cpu; + + for_each_online_cpu(cpu) + netif_wake_subqueue(dev, cpu); +} + +/* Ioctl commands. */ +static int tile_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + return -EOPNOTSUPP; +} + +/* Get system network statistics for device. */ +static struct net_device_stats *tile_net_get_stats(struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + return &priv->stats; +} + +/* Change the MTU. */ +static int tile_net_change_mtu(struct net_device *dev, int new_mtu) +{ + if ((new_mtu < 68) || (new_mtu > 1500)) + return -EINVAL; + dev->mtu = new_mtu; + return 0; +} + +/* Change the Ethernet address of the NIC. + * + * The hypervisor driver does not support changing MAC address. However, + * the hardware does not do anything with the MAC address, so the address + * which gets used on outgoing packets, and which is accepted on incoming + * packets, is completely up to us. + * + * Returns 0 on success, negative on failure. + */ +static int tile_net_set_mac_address(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EINVAL; + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + return 0; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void tile_net_netpoll(struct net_device *dev) +{ + disable_percpu_irq(ingress_irq); + tile_net_handle_ingress_irq(ingress_irq, NULL); + enable_percpu_irq(ingress_irq, 0); +} +#endif + +static const struct net_device_ops tile_net_ops = { + .ndo_open = tile_net_open, + .ndo_stop = tile_net_stop, + .ndo_start_xmit = tile_net_tx, + .ndo_select_queue = tile_net_select_queue, + .ndo_do_ioctl = tile_net_ioctl, + .ndo_get_stats = tile_net_get_stats, + .ndo_change_mtu = tile_net_change_mtu, + .ndo_tx_timeout = tile_net_tx_timeout, + .ndo_set_mac_address = tile_net_set_mac_address, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tile_net_netpoll, +#endif +}; + +/* The setup function. + * + * This uses ether_setup() to assign various fields in dev, including + * setting IFF_BROADCAST and IFF_MULTICAST, then sets some extra fields. + */ +static void tile_net_setup(struct net_device *dev) +{ + ether_setup(dev); + dev->netdev_ops = &tile_net_ops; + dev->watchdog_timeo = TILE_NET_TIMEOUT; + dev->features |= NETIF_F_LLTX; + dev->features |= NETIF_F_HW_CSUM; + dev->features |= NETIF_F_SG; + dev->features |= NETIF_F_TSO; + dev->mtu = 1500; +} + +/* Allocate the device structure, register the device, and obtain the + * MAC address from the hypervisor. + */ +static void tile_net_dev_init(const char *name, const uint8_t *mac) +{ + int ret; + int i; + int nz_addr = 0; + struct net_device *dev; + struct tile_net_priv *priv; + + /* HACK: Ignore "loop" links. */ + if (strncmp(name, "loop", 4) == 0) + return; + + /* Allocate the device structure. Normally, "name" is a + * template, instantiated by register_netdev(), but not for us. + */ + dev = alloc_netdev_mqs(sizeof(*priv), name, tile_net_setup, + NR_CPUS, 1); + if (!dev) { + pr_err("alloc_netdev_mqs(%s) failed\n", name); + return; + } + + /* Initialize "priv". */ + priv = netdev_priv(dev); + memset(priv, 0, sizeof(*priv)); + priv->dev = dev; + priv->channel = -1; + priv->loopify_channel = -1; + priv->echannel = -1; + + /* Get the MAC address and set it in the device struct; this must + * be done before the device is opened. If the MAC is all zeroes, + * we use a random address, since we're probably on the simulator. + */ + for (i = 0; i < 6; i++) + nz_addr |= mac[i]; + + if (nz_addr) { + memcpy(dev->dev_addr, mac, 6); + dev->addr_len = 6; + } else { + random_ether_addr(dev->dev_addr); + } + + /* Register the network device. */ + ret = register_netdev(dev); + if (ret) { + netdev_err(dev, "register_netdev failed %d\n", ret); + free_netdev(dev); + return; + } +} + +/* Per-cpu module initialization. */ +static void tile_net_init_module_percpu(void *unused) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + int my_cpu = smp_processor_id(); + + info->has_iqueue = false; + + info->my_cpu = my_cpu; + + /* Initialize the egress timer. */ + hrtimer_init(&info->egress_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + info->egress_timer.function = tile_net_handle_egress_timer; +} + +/* Module initialization. */ +static int __init tile_net_init_module(void) +{ + int i; + char name[GXIO_MPIPE_LINK_NAME_LEN]; + uint8_t mac[6]; + + pr_info("Tilera Network Driver\n"); + + mutex_init(&tile_net_devs_for_channel_mutex); + + /* Initialize each CPU. */ + on_each_cpu(tile_net_init_module_percpu, NULL, 1); + + /* Find out what devices we have, and initialize them. */ + for (i = 0; gxio_mpipe_link_enumerate_mac(i, name, mac) >= 0; i++) + tile_net_dev_init(name, mac); + + if (!network_cpus_init()) + network_cpus_map = *cpu_online_mask; + + return 0; +} + +module_init(tile_net_init_module); diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h index 4ffcd57b011b..2857ab078aac 100644 --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -478,6 +478,7 @@ struct netvsc_device { u32 nvsp_version; atomic_t num_outstanding_sends; + wait_queue_head_t wait_drain; bool start_remove; bool destroy; /* diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 8b919471472f..0c569831db5a 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -42,6 +42,7 @@ static struct netvsc_device *alloc_net_device(struct hv_device *device) if (!net_device) return NULL; + init_waitqueue_head(&net_device->wait_drain); net_device->start_remove = false; net_device->destroy = false; net_device->dev = device; @@ -387,12 +388,8 @@ int netvsc_device_remove(struct hv_device *device) spin_unlock_irqrestore(&device->channel->inbound_lock, flags); /* Wait for all send completions */ - while (atomic_read(&net_device->num_outstanding_sends)) { - dev_info(&device->device, - "waiting for %d requests to complete...\n", - atomic_read(&net_device->num_outstanding_sends)); - udelay(100); - } + wait_event(net_device->wait_drain, + atomic_read(&net_device->num_outstanding_sends) == 0); netvsc_disconnect_vsp(net_device); @@ -486,6 +483,9 @@ static void netvsc_send_completion(struct hv_device *device, num_outstanding_sends = atomic_dec_return(&net_device->num_outstanding_sends); + if (net_device->destroy && num_outstanding_sends == 0) + wake_up(&net_device->wait_drain); + if (netif_queue_stopped(ndev) && !net_device->start_remove && (hv_ringbuf_avail_percent(&device->channel->outbound) > RING_AVAIL_PERCENT_HIWATER || diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index 5ac46f5226f3..47f8e8939266 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -41,6 +41,8 @@ MODULE_LICENSE("GPL"); #define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ #define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */ #define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */ +#define IP101A_G_IRQ_PIN_USED (1<<15) /* INTR pin used */ +#define IP101A_G_IRQ_DEFAULT IP101A_G_IRQ_PIN_USED static int ip175c_config_init(struct phy_device *phydev) { @@ -136,6 +138,11 @@ static int ip1001_config_init(struct phy_device *phydev) if (c < 0) return c; + /* INTR pin used: speed/link/duplex will cause an interrupt */ + c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT); + if (c < 0) + return c; + if (phydev->interface == PHY_INTERFACE_MODE_RGMII) { /* Additional delay (2ns) used to adjust RX clock phase * at RGMII interface */ diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c index 39ea0674dcde..5c120189ec86 100644 --- a/drivers/net/phy/mdio-mux.c +++ b/drivers/net/phy/mdio-mux.c @@ -46,7 +46,13 @@ static int mdio_mux_read(struct mii_bus *bus, int phy_id, int regnum) struct mdio_mux_parent_bus *pb = cb->parent; int r; - mutex_lock(&pb->mii_bus->mdio_lock); + /* In theory multiple mdio_mux could be stacked, thus creating + * more than a single level of nesting. But in practice, + * SINGLE_DEPTH_NESTING will cover the vast majority of use + * cases. We use it, instead of trying to handle the general + * case. + */ + mutex_lock_nested(&pb->mii_bus->mdio_lock, SINGLE_DEPTH_NESTING); r = pb->switch_fn(pb->current_child, cb->bus_number, pb->switch_data); if (r) goto out; @@ -71,7 +77,7 @@ static int mdio_mux_write(struct mii_bus *bus, int phy_id, int r; - mutex_lock(&pb->mii_bus->mdio_lock); + mutex_lock_nested(&pb->mii_bus->mdio_lock, SINGLE_DEPTH_NESTING); r = pb->switch_fn(pb->current_child, cb->bus_number, pb->switch_data); if (r) goto out; diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 683ef1ce5519..5061608f408c 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -96,7 +96,7 @@ static int of_mdio_bus_match(struct device *dev, void *mdio_bus_np) } /** * of_mdio_find_bus - Given an mii_bus node, find the mii_bus. - * @mdio_np: Pointer to the mii_bus. + * @mdio_bus_np: Pointer to the mii_bus. * * Returns a pointer to the mii_bus, or NULL if none found. * diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 590f902deb6b..9d6c80c8a0cf 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -161,7 +161,7 @@ static struct phy_driver ks8051_driver = { static struct phy_driver ks8001_driver = { .phy_id = PHY_ID_KS8001, .name = "Micrel KS8001 or KS8721", - .phy_id_mask = 0x00fffff0, + .phy_id_mask = 0x00ffffff, .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = kszphy_config_init, @@ -174,7 +174,7 @@ static struct phy_driver ks8001_driver = { static struct phy_driver ksz9021_driver = { .phy_id = PHY_ID_KSZ9021, - .phy_id_mask = 0x000fff10, + .phy_id_mask = 0x000ffffe, .name = "Micrel KSZ9021 Gigabit PHY", .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), @@ -240,8 +240,8 @@ MODULE_AUTHOR("David J. Choi"); MODULE_LICENSE("GPL"); static struct mdio_device_id __maybe_unused micrel_tbl[] = { - { PHY_ID_KSZ9021, 0x000fff10 }, - { PHY_ID_KS8001, 0x00fffff0 }, + { PHY_ID_KSZ9021, 0x000ffffe }, + { PHY_ID_KS8001, 0x00ffffff }, { PHY_ID_KS8737, 0x00fffff0 }, { PHY_ID_KS8041, 0x00fffff0 }, { PHY_ID_KS8051, 0x00fffff0 }, diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c index 964031e3da87..a28a983d465e 100644 --- a/drivers/net/usb/ipheth.c +++ b/drivers/net/usb/ipheth.c @@ -59,6 +59,7 @@ #define USB_PRODUCT_IPHONE_3G 0x1292 #define USB_PRODUCT_IPHONE_3GS 0x1294 #define USB_PRODUCT_IPHONE_4 0x1297 +#define USB_PRODUCT_IPAD 0x129a #define USB_PRODUCT_IPHONE_4_VZW 0x129c #define USB_PRODUCT_IPHONE_4S 0x12a0 @@ -100,6 +101,10 @@ static struct usb_device_id ipheth_table[] = { USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4, IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, IPHETH_USBINTF_PROTO) }, + { USB_DEVICE_AND_INTERFACE_INFO( + USB_VENDOR_APPLE, USB_PRODUCT_IPAD, + IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, + IPHETH_USBINTF_PROTO) }, { USB_DEVICE_AND_INTERFACE_INFO( USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW, IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 3b206786b5e7..a051cedd64bd 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -197,6 +197,10 @@ err: static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on) { struct usbnet *dev = usb_get_intfdata(intf); + + /* can be called while disconnecting */ + if (!dev) + return 0; return qmi_wwan_manage_power(dev, on); } @@ -257,29 +261,6 @@ err: return rv; } -/* Gobi devices uses identical class/protocol codes for all interfaces regardless - * of function. Some of these are CDC ACM like and have the exact same endpoints - * we are looking for. This leaves two possible strategies for identifying the - * correct interface: - * a) hardcoding interface number, or - * b) use the fact that the wwan interface is the only one lacking additional - * (CDC functional) descriptors - * - * Let's see if we can get away with the generic b) solution. - */ -static int qmi_wwan_bind_gobi(struct usbnet *dev, struct usb_interface *intf) -{ - int rv = -EINVAL; - - /* ignore any interface with additional descriptors */ - if (intf->cur_altsetting->extralen) - goto err; - - rv = qmi_wwan_bind_shared(dev, intf); -err: - return rv; -} - static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *intf) { struct usb_driver *subdriver = (void *)dev->data[0]; @@ -347,15 +328,15 @@ static const struct driver_info qmi_wwan_shared = { .manage_power = qmi_wwan_manage_power, }; -static const struct driver_info qmi_wwan_gobi = { - .description = "Qualcomm Gobi wwan/QMI device", +static const struct driver_info qmi_wwan_force_int0 = { + .description = "Qualcomm WWAN/QMI device", .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_gobi, + .bind = qmi_wwan_bind_shared, .unbind = qmi_wwan_unbind_shared, .manage_power = qmi_wwan_manage_power, + .data = BIT(0), /* interface whitelist bitmap */ }; -/* ZTE suck at making USB descriptors */ static const struct driver_info qmi_wwan_force_int1 = { .description = "Qualcomm WWAN/QMI device", .flags = FLAG_WWAN, @@ -365,6 +346,24 @@ static const struct driver_info qmi_wwan_force_int1 = { .data = BIT(1), /* interface whitelist bitmap */ }; +static const struct driver_info qmi_wwan_force_int2 = { + .description = "Qualcomm WWAN/QMI device", + .flags = FLAG_WWAN, + .bind = qmi_wwan_bind_shared, + .unbind = qmi_wwan_unbind_shared, + .manage_power = qmi_wwan_manage_power, + .data = BIT(2), /* interface whitelist bitmap */ +}; + +static const struct driver_info qmi_wwan_force_int3 = { + .description = "Qualcomm WWAN/QMI device", + .flags = FLAG_WWAN, + .bind = qmi_wwan_bind_shared, + .unbind = qmi_wwan_unbind_shared, + .manage_power = qmi_wwan_manage_power, + .data = BIT(3), /* interface whitelist bitmap */ +}; + static const struct driver_info qmi_wwan_force_int4 = { .description = "Qualcomm WWAN/QMI device", .flags = FLAG_WWAN, @@ -390,16 +389,23 @@ static const struct driver_info qmi_wwan_force_int4 = { static const struct driver_info qmi_wwan_sierra = { .description = "Sierra Wireless wwan/QMI device", .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_gobi, + .bind = qmi_wwan_bind_shared, .unbind = qmi_wwan_unbind_shared, .manage_power = qmi_wwan_manage_power, .data = BIT(8) | BIT(19), /* interface whitelist bitmap */ }; #define HUAWEI_VENDOR_ID 0x12D1 + +/* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */ +#define QMI_GOBI1K_DEVICE(vend, prod) \ + USB_DEVICE(vend, prod), \ + .driver_info = (unsigned long)&qmi_wwan_force_int3 + +/* Gobi 2000 and Gobi 3000 QMI/wwan interface number is 0 according to qcserial */ #define QMI_GOBI_DEVICE(vend, prod) \ USB_DEVICE(vend, prod), \ - .driver_info = (unsigned long)&qmi_wwan_gobi + .driver_info = (unsigned long)&qmi_wwan_force_int0 static const struct usb_device_id products[] = { { /* Huawei E392, E398 and possibly others sharing both device id and more... */ @@ -501,6 +507,15 @@ static const struct usb_device_id products[] = { .bInterfaceProtocol = 0xff, .driver_info = (unsigned long)&qmi_wwan_force_int4, }, + { /* ZTE MF60 */ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x19d2, + .idProduct = 0x1402, + .bInterfaceClass = 0xff, + .bInterfaceSubClass = 0xff, + .bInterfaceProtocol = 0xff, + .driver_info = (unsigned long)&qmi_wwan_force_int2, + }, { /* Sierra Wireless MC77xx in QMI mode */ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x1199, @@ -510,20 +525,24 @@ static const struct usb_device_id products[] = { .bInterfaceProtocol = 0xff, .driver_info = (unsigned long)&qmi_wwan_sierra, }, - {QMI_GOBI_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ - {QMI_GOBI_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ - {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ - {QMI_GOBI_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ - {QMI_GOBI_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ - {QMI_GOBI_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ - {QMI_GOBI_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */ + + /* Gobi 1000 devices */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ + {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ + {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ + {QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */ + + /* Gobi 2000 and 3000 devices */ {QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */ {QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */ {QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */ diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index 3faef5670d1f..d75d1f56becf 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -946,7 +946,7 @@ struct sk_buff *sierra_net_tx_fixup(struct usbnet *dev, struct sk_buff *skb, } static const u8 sierra_net_ifnum_list[] = { 7, 10, 11 }; -static const struct sierra_net_info_data sierra_net_info_data_68A3 = { +static const struct sierra_net_info_data sierra_net_info_data_direct_ip = { .rx_urb_size = 8 * 1024, .whitelist = { .infolen = ARRAY_SIZE(sierra_net_ifnum_list), @@ -954,7 +954,7 @@ static const struct sierra_net_info_data sierra_net_info_data_68A3 = { } }; -static const struct driver_info sierra_net_info_68A3 = { +static const struct driver_info sierra_net_info_direct_ip = { .description = "Sierra Wireless USB-to-WWAN Modem", .flags = FLAG_WWAN | FLAG_SEND_ZLP, .bind = sierra_net_bind, @@ -962,12 +962,18 @@ static const struct driver_info sierra_net_info_68A3 = { .status = sierra_net_status, .rx_fixup = sierra_net_rx_fixup, .tx_fixup = sierra_net_tx_fixup, - .data = (unsigned long)&sierra_net_info_data_68A3, + .data = (unsigned long)&sierra_net_info_data_direct_ip, }; static const struct usb_device_id products[] = { {USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */ - .driver_info = (unsigned long) &sierra_net_info_68A3}, + .driver_info = (unsigned long) &sierra_net_info_direct_ip}, + {USB_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */ + .driver_info = (unsigned long) &sierra_net_info_direct_ip}, + {USB_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */ + .driver_info = (unsigned long) &sierra_net_info_direct_ip}, + {USB_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */ + .driver_info = (unsigned long) &sierra_net_info_direct_ip}, {}, /* last item */ }; diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 9f58330f1312..aba769d77459 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -796,11 +796,13 @@ int usbnet_open (struct net_device *net) if (info->manage_power) { retval = info->manage_power(dev, 1); if (retval < 0) - goto done; + goto done_manage_power_error; usb_autopm_put_interface(dev->intf); } return retval; +done_manage_power_error: + clear_bit(EVENT_DEV_OPEN, &dev->flags); done: usb_autopm_put_interface(dev->intf); done_nopm: @@ -876,9 +878,9 @@ void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info) { struct usbnet *dev = netdev_priv(net); - strncpy (info->driver, dev->driver_name, sizeof info->driver); - strncpy (info->version, DRIVER_VERSION, sizeof info->version); - strncpy (info->fw_version, dev->driver_info->description, + strlcpy (info->driver, dev->driver_name, sizeof info->driver); + strlcpy (info->version, DRIVER_VERSION, sizeof info->version); + strlcpy (info->fw_version, dev->driver_info->description, sizeof info->fw_version); usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info); } @@ -1202,6 +1204,21 @@ deferred: } EXPORT_SYMBOL_GPL(usbnet_start_xmit); +static void rx_alloc_submit(struct usbnet *dev, gfp_t flags) +{ + struct urb *urb; + int i; + + /* don't refill the queue all at once */ + for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) { + urb = usb_alloc_urb(0, flags); + if (urb != NULL) { + if (rx_submit(dev, urb, flags) == -ENOLINK) + return; + } + } +} + /*-------------------------------------------------------------------------*/ // tasklet (work deferred from completions, in_irq) or timer @@ -1241,26 +1258,14 @@ static void usbnet_bh (unsigned long param) !timer_pending (&dev->delay) && !test_bit (EVENT_RX_HALT, &dev->flags)) { int temp = dev->rxq.qlen; - int qlen = RX_QLEN (dev); - if (temp < qlen) { - struct urb *urb; - int i; - - // don't refill the queue all at once - for (i = 0; i < 10 && dev->rxq.qlen < qlen; i++) { - urb = usb_alloc_urb (0, GFP_ATOMIC); - if (urb != NULL) { - if (rx_submit (dev, urb, GFP_ATOMIC) == - -ENOLINK) - return; - } - } + if (temp < RX_QLEN(dev)) { + rx_alloc_submit(dev, GFP_ATOMIC); if (temp != dev->rxq.qlen) netif_dbg(dev, link, dev->net, "rxqlen %d --> %d\n", temp, dev->rxq.qlen); - if (dev->rxq.qlen < qlen) + if (dev->rxq.qlen < RX_QLEN(dev)) tasklet_schedule (&dev->bh); } if (dev->txq.qlen < TX_QLEN (dev)) @@ -1513,6 +1518,7 @@ int usbnet_suspend (struct usb_interface *intf, pm_message_t message) spin_lock_irq(&dev->txq.lock); /* don't autosuspend while transmitting */ if (dev->txq.qlen && PMSG_IS_AUTO(message)) { + dev->suspend_count--; spin_unlock_irq(&dev->txq.lock); return -EBUSY; } else { @@ -1569,6 +1575,13 @@ int usbnet_resume (struct usb_interface *intf) spin_unlock_irq(&dev->txq.lock); if (test_bit(EVENT_DEV_OPEN, &dev->flags)) { + /* handle remote wakeup ASAP */ + if (!dev->wait && + netif_device_present(dev->net) && + !timer_pending(&dev->delay) && + !test_bit(EVENT_RX_HALT, &dev->flags)) + rx_alloc_submit(dev, GFP_KERNEL); + if (!(dev->txq.qlen >= TX_QLEN(dev))) netif_tx_wake_all_queues(dev->net); tasklet_schedule (&dev->bh); diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 5214b1eceb95..f18149ae2588 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -42,7 +42,8 @@ module_param(gso, bool, 0444); #define VIRTNET_DRIVER_VERSION "1.0.0" struct virtnet_stats { - struct u64_stats_sync syncp; + struct u64_stats_sync tx_syncp; + struct u64_stats_sync rx_syncp; u64 tx_bytes; u64 tx_packets; @@ -300,10 +301,10 @@ static void receive_buf(struct net_device *dev, void *buf, unsigned int len) hdr = skb_vnet_hdr(skb); - u64_stats_update_begin(&stats->syncp); + u64_stats_update_begin(&stats->rx_syncp); stats->rx_bytes += skb->len; stats->rx_packets++; - u64_stats_update_end(&stats->syncp); + u64_stats_update_end(&stats->rx_syncp); if (hdr->hdr.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) { pr_debug("Needs csum!\n"); @@ -565,10 +566,10 @@ static unsigned int free_old_xmit_skbs(struct virtnet_info *vi) while ((skb = virtqueue_get_buf(vi->svq, &len)) != NULL) { pr_debug("Sent skb %p\n", skb); - u64_stats_update_begin(&stats->syncp); + u64_stats_update_begin(&stats->tx_syncp); stats->tx_bytes += skb->len; stats->tx_packets++; - u64_stats_update_end(&stats->syncp); + u64_stats_update_end(&stats->tx_syncp); tot_sgs += skb_vnet_hdr(skb)->num_sg; dev_kfree_skb_any(skb); @@ -703,12 +704,16 @@ static struct rtnl_link_stats64 *virtnet_stats(struct net_device *dev, u64 tpackets, tbytes, rpackets, rbytes; do { - start = u64_stats_fetch_begin(&stats->syncp); + start = u64_stats_fetch_begin(&stats->tx_syncp); tpackets = stats->tx_packets; tbytes = stats->tx_bytes; + } while (u64_stats_fetch_retry(&stats->tx_syncp, start)); + + do { + start = u64_stats_fetch_begin(&stats->rx_syncp); rpackets = stats->rx_packets; rbytes = stats->rx_bytes; - } while (u64_stats_fetch_retry(&stats->syncp, start)); + } while (u64_stats_fetch_retry(&stats->rx_syncp, start)); tot->rx_packets += rpackets; tot->tx_packets += tpackets; diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 520a4b2eb9cc..a747c632597a 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -7233,8 +7233,8 @@ static int airo_get_aplist(struct net_device *dev, } } else { dwrq->flags = 1; /* Should be define'd */ - memcpy(extra + sizeof(struct sockaddr)*i, - &qual, sizeof(struct iw_quality)*i); + memcpy(extra + sizeof(struct sockaddr) * i, qual, + sizeof(struct iw_quality) * i); } dwrq->length = i; diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h index c54b7d37bff1..420d69b2674c 100644 --- a/drivers/net/wireless/ath/ath.h +++ b/drivers/net/wireless/ath/ath.h @@ -143,6 +143,7 @@ struct ath_common { u32 keymax; DECLARE_BITMAP(keymap, ATH_KEYMAX); DECLARE_BITMAP(tkip_keymap, ATH_KEYMAX); + DECLARE_BITMAP(ccmp_keymap, ATH_KEYMAX); enum ath_crypt_caps crypt_caps; unsigned int clockrate; diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index fbaa30930076..44ad6fe0278f 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1045,11 +1045,11 @@ ath5k_drain_tx_buffs(struct ath5k_hw *ah) ath5k_txbuf_free_skb(ah, bf); - spin_lock_bh(&ah->txbuflock); + spin_lock(&ah->txbuflock); list_move_tail(&bf->list, &ah->txbuf); ah->txbuf_len++; txq->txq_len--; - spin_unlock_bh(&ah->txbuflock); + spin_unlock(&ah->txbuflock); } txq->link = NULL; txq->txq_poll_mark = false; diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index a277cf6f339d..4866550ddd96 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -214,6 +214,7 @@ struct ath_frame_info { enum ath9k_key_type keytype; u8 keyix; u8 retries; + u8 rtscts_rate; }; struct ath_buf_state { diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index 2b8f61c210e1..abbd6effd60d 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1496,6 +1496,7 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw, priv->num_sta_assoc_vif++ : priv->num_sta_assoc_vif--; if (priv->ah->opmode == NL80211_IFTYPE_STATION) { + ath9k_htc_choose_set_bssid(priv); if (bss_conf->assoc && (priv->num_sta_assoc_vif == 1)) ath9k_htc_start_ani(priv); else if (priv->num_sta_assoc_vif == 0) @@ -1503,13 +1504,11 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw, } } - if (changed & BSS_CHANGED_BSSID) { + if (changed & BSS_CHANGED_IBSS) { if (priv->ah->opmode == NL80211_IFTYPE_ADHOC) { common->curaid = bss_conf->aid; memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN); ath9k_htc_set_bssid(priv); - } else if (priv->ah->opmode == NL80211_IFTYPE_STATION) { - ath9k_htc_choose_set_bssid(priv); } } diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 7db1890448f2..995ca8e1302e 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -622,7 +622,7 @@ static int __ath9k_hw_init(struct ath_hw *ah) if (NR_CPUS > 1 && ah->config.serialize_regmode == SER_REG_MODE_AUTO) { if (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCI || - ((AR_SREV_9160(ah) || AR_SREV_9280(ah)) && + ((AR_SREV_9160(ah) || AR_SREV_9280(ah) || AR_SREV_9287(ah)) && !ah->is_pciexpress)) { ah->config.serialize_regmode = SER_REG_MODE_ON; @@ -784,13 +784,25 @@ static void ath9k_hw_init_qos(struct ath_hw *ah) u32 ar9003_get_pll_sqsum_dvc(struct ath_hw *ah) { + struct ath_common *common = ath9k_hw_common(ah); + int i = 0; + REG_CLR_BIT(ah, PLL3, PLL3_DO_MEAS_MASK); udelay(100); REG_SET_BIT(ah, PLL3, PLL3_DO_MEAS_MASK); - while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0) + while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0) { + udelay(100); + if (WARN_ON_ONCE(i >= 100)) { + ath_err(common, "PLL4 meaurement not done\n"); + break; + } + + i++; + } + return (REG_READ(ah, PLL3) & SQSUM_DVC_MASK) >> 3; } EXPORT_SYMBOL(ar9003_get_pll_sqsum_dvc); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 4de4473776ac..dac1a2709e3c 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -971,6 +971,15 @@ void ath_hw_pll_work(struct work_struct *work) hw_pll_work.work); u32 pll_sqsum; + /* + * ensure that the PLL WAR is executed only + * after the STA is associated (or) if the + * beaconing had started in interfaces that + * uses beacons. + */ + if (!(sc->sc_flags & SC_OP_BEACONS)) + return; + if (AR_SREV_9485(sc->sc_ah)) { ath9k_ps_wakeup(sc); @@ -1443,15 +1452,6 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, } } - if ((ah->opmode == NL80211_IFTYPE_ADHOC) || - ((vif->type == NL80211_IFTYPE_ADHOC) && - sc->nvifs > 0)) { - ath_err(common, "Cannot create ADHOC interface when other" - " interfaces already exist.\n"); - ret = -EINVAL; - goto out; - } - ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type); sc->nvifs++; @@ -1476,15 +1476,6 @@ static int ath9k_change_interface(struct ieee80211_hw *hw, mutex_lock(&sc->mutex); ath9k_ps_wakeup(sc); - /* See if new interface type is valid. */ - if ((new_type == NL80211_IFTYPE_ADHOC) && - (sc->nvifs > 1)) { - ath_err(common, "When using ADHOC, it must be the only" - " interface.\n"); - ret = -EINVAL; - goto out; - } - if (ath9k_uses_beacons(new_type) && !ath9k_uses_beacons(vif->type)) { if (sc->nbcnvifs >= ATH_BCBUF) { diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index e1fcc68124dc..0735aeb3b26c 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -695,9 +695,9 @@ static bool ath_edma_get_buffers(struct ath_softc *sc, __skb_unlink(skb, &rx_edma->rx_fifo); list_add_tail(&bf->list, &sc->rx.rxbuf); ath_rx_edma_buf_link(sc, qtype); - } else { - bf = NULL; } + + bf = NULL; } *dest = bf; @@ -822,7 +822,8 @@ static bool ath9k_rx_accept(struct ath_common *common, * descriptor does contain a valid key index. This has been observed * mostly with CCMP encryption. */ - if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID) + if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID || + !test_bit(rx_stats->rs_keyix, common->ccmp_keymap)) rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS; if (!rx_stats->rs_datalen) { diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index d59dd01d6cde..4d571394c7a8 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -938,6 +938,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, struct ieee80211_tx_rate *rates; const struct ieee80211_rate *rate; struct ieee80211_hdr *hdr; + struct ath_frame_info *fi = get_frame_info(bf->bf_mpdu); int i; u8 rix = 0; @@ -948,18 +949,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, /* set dur_update_en for l-sig computation except for PS-Poll frames */ info->dur_update = !ieee80211_is_pspoll(hdr->frame_control); - - /* - * We check if Short Preamble is needed for the CTS rate by - * checking the BSS's global flag. - * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used. - */ - rate = ieee80211_get_rts_cts_rate(sc->hw, tx_info); - info->rtscts_rate = rate->hw_value; - - if (tx_info->control.vif && - tx_info->control.vif->bss_conf.use_short_preamble) - info->rtscts_rate |= rate->hw_value_short; + info->rtscts_rate = fi->rtscts_rate; for (i = 0; i < 4; i++) { bool is_40, is_sgi, is_sp; @@ -1001,13 +991,13 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, } /* legacy rates */ + rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx]; if ((tx_info->band == IEEE80211_BAND_2GHZ) && !(rate->flags & IEEE80211_RATE_ERP_G)) phy = WLAN_RC_PHY_CCK; else phy = WLAN_RC_PHY_OFDM; - rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx]; info->rates[i].Rate = rate->hw_value; if (rate->hw_value_short) { if (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) @@ -1776,10 +1766,22 @@ static void setup_frame_info(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_sta *sta = tx_info->control.sta; struct ieee80211_key_conf *hw_key = tx_info->control.hw_key; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + const struct ieee80211_rate *rate; struct ath_frame_info *fi = get_frame_info(skb); struct ath_node *an = NULL; enum ath9k_key_type keytype; + bool short_preamble = false; + /* + * We check if Short Preamble is needed for the CTS rate by + * checking the BSS's global flag. + * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used. + */ + if (tx_info->control.vif && + tx_info->control.vif->bss_conf.use_short_preamble) + short_preamble = true; + + rate = ieee80211_get_rts_cts_rate(hw, tx_info); keytype = ath9k_cmn_get_hw_crypto_keytype(skb); if (sta) @@ -1794,6 +1796,9 @@ static void setup_frame_info(struct ieee80211_hw *hw, struct sk_buff *skb, fi->keyix = ATH9K_TXKEYIX_INVALID; fi->keytype = keytype; fi->framelen = framelen; + fi->rtscts_rate = rate->hw_value; + if (short_preamble) + fi->rtscts_rate |= rate->hw_value_short; } u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate) diff --git a/drivers/net/wireless/ath/key.c b/drivers/net/wireless/ath/key.c index 0e81904956cf..5c54aa43ca2d 100644 --- a/drivers/net/wireless/ath/key.c +++ b/drivers/net/wireless/ath/key.c @@ -556,6 +556,9 @@ int ath_key_config(struct ath_common *common, return -EIO; set_bit(idx, common->keymap); + if (key->cipher == WLAN_CIPHER_SUITE_CCMP) + set_bit(idx, common->ccmp_keymap); + if (key->cipher == WLAN_CIPHER_SUITE_TKIP) { set_bit(idx + 64, common->keymap); set_bit(idx, common->tkip_keymap); @@ -582,6 +585,7 @@ void ath_key_delete(struct ath_common *common, struct ieee80211_key_conf *key) return; clear_bit(key->hw_key_idx, common->keymap); + clear_bit(key->hw_key_idx, common->ccmp_keymap); if (key->cipher != WLAN_CIPHER_SUITE_TKIP) return; diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 67c13af6f206..c06b6cb5c91e 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -877,6 +877,10 @@ struct b43_wl { * from the mac80211 subsystem. */ u16 mac80211_initially_registered_queues; + /* Set this if we call ieee80211_register_hw() and check if we call + * ieee80211_unregister_hw(). */ + bool hw_registred; + /* We can only have one operating interface (802.11 core) * at a time. General information about this interface follows. */ diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 5a39b226b2e3..1b988f26bdf1 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2437,6 +2437,7 @@ start_ieee80211: err = ieee80211_register_hw(wl->hw); if (err) goto err_one_core_detach; + wl->hw_registred = true; b43_leds_register(wl->current_dev); goto out; @@ -3766,7 +3767,7 @@ static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan) if (prev_status >= B43_STAT_STARTED) { err = b43_wireless_core_start(up_dev); if (err) { - b43err(wl, "Fatal: Coult not start device for " + b43err(wl, "Fatal: Could not start device for " "selected %s-GHz band\n", band_to_string(chan->band)); b43_wireless_core_exit(up_dev); @@ -5299,6 +5300,7 @@ static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev) hw->queues = modparam_qos ? B43_QOS_QUEUE_NUM : 1; wl->mac80211_initially_registered_queues = hw->queues; + wl->hw_registred = false; hw->max_rates = 2; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) @@ -5370,12 +5372,15 @@ static void b43_bcma_remove(struct bcma_device *core) * as the ieee80211 unreg will destroy the workqueue. */ cancel_work_sync(&wldev->restart_work); - /* Restore the queues count before unregistering, because firmware detect - * might have modified it. Restoring is important, so the networking - * stack can properly free resources. */ - wl->hw->queues = wl->mac80211_initially_registered_queues; - b43_leds_stop(wldev); - ieee80211_unregister_hw(wl->hw); + B43_WARN_ON(!wl); + if (wl->current_dev == wldev && wl->hw_registred) { + /* Restore the queues count before unregistering, because firmware detect + * might have modified it. Restoring is important, so the networking + * stack can properly free resources. */ + wl->hw->queues = wl->mac80211_initially_registered_queues; + b43_leds_stop(wldev); + ieee80211_unregister_hw(wl->hw); + } b43_one_core_detach(wldev->dev); @@ -5446,7 +5451,7 @@ static void b43_ssb_remove(struct ssb_device *sdev) cancel_work_sync(&wldev->restart_work); B43_WARN_ON(!wl); - if (wl->current_dev == wldev) { + if (wl->current_dev == wldev && wl->hw_registred) { /* Restore the queues count before unregistering, because firmware detect * might have modified it. Restoring is important, so the networking * stack can properly free resources. */ diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c index f1f8bd09bd87..c8baf020c20f 100644 --- a/drivers/net/wireless/b43legacy/dma.c +++ b/drivers/net/wireless/b43legacy/dma.c @@ -1072,7 +1072,7 @@ static int dma_tx_fragment(struct b43legacy_dmaring *ring, meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1); /* create a bounce buffer in zone_dma on mapping failure. */ if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) { - bounce_skb = __dev_alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA); + bounce_skb = alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA); if (!bounce_skb) { ring->current_slot = old_top_slot; ring->used_slots = old_used_slots; diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index cd9c9bc186d9..eae691e2f7dd 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -2633,7 +2633,7 @@ static int b43legacy_switch_phymode(struct b43legacy_wl *wl, if (prev_status >= B43legacy_STAT_STARTED) { err = b43legacy_wireless_core_start(up_dev); if (err) { - b43legacyerr(wl, "Fatal: Coult not start device for " + b43legacyerr(wl, "Fatal: Could not start device for " "newly selected %s-PHY mode\n", phymode_to_string(new_mode)); b43legacy_wireless_core_exit(up_dev); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index e2480d196276..8e7e6928c936 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -89,9 +89,9 @@ int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev) data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1; brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret); - /* redirect, configure ane enable io for interrupt signal */ + /* redirect, configure and enable io for interrupt signal */ data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE; - if (sdiodev->irq_flags | IRQF_TRIGGER_HIGH) + if (sdiodev->irq_flags & IRQF_TRIGGER_HIGH) data |= SDIO_SEPINT_ACT_HI; brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret); diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 9cfae0c08707..95aa8e1683ec 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -1903,14 +1903,6 @@ static void ipw2100_down(struct ipw2100_priv *priv) netif_stop_queue(priv->net_dev); } -/* Called by register_netdev() */ -static int ipw2100_net_init(struct net_device *dev) -{ - struct ipw2100_priv *priv = libipw_priv(dev); - - return ipw2100_up(priv, 1); -} - static int ipw2100_wdev_init(struct net_device *dev) { struct ipw2100_priv *priv = libipw_priv(dev); @@ -6087,7 +6079,6 @@ static const struct net_device_ops ipw2100_netdev_ops = { .ndo_stop = ipw2100_close, .ndo_start_xmit = libipw_xmit, .ndo_change_mtu = libipw_change_mtu, - .ndo_init = ipw2100_net_init, .ndo_tx_timeout = ipw2100_tx_timeout, .ndo_set_mac_address = ipw2100_set_address, .ndo_validate_addr = eth_validate_addr, @@ -6329,6 +6320,10 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, printk(KERN_INFO DRV_NAME ": Detected Intel PRO/Wireless 2100 Network Connection\n"); + err = ipw2100_up(priv, 1); + if (err) + goto fail; + err = ipw2100_wdev_init(dev); if (err) goto fail; @@ -6338,12 +6333,7 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, * network device we would call ipw2100_up. This introduced a race * condition with newer hotplug configurations (network was coming * up and making calls before the device was initialized). - * - * If we called ipw2100_up before we registered the device, then the - * device name wasn't registered. So, we instead use the net_dev->init - * member to call a function that then just turns and calls ipw2100_up. - * net_dev->init is called after name allocation but before the - * notifier chain is called */ + */ err = register_netdev(dev); if (err) { printk(KERN_WARNING DRV_NAME diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 509301a5e7e2..ff5d689e13f3 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -3405,7 +3405,7 @@ il4965_remove_dynamic_key(struct il_priv *il, return 0; } - if (il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET) { + if (il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_INVALID) { IL_WARN("Removing wrong key %d 0x%x\n", keyconf->keyidx, key_flags); spin_unlock_irqrestore(&il->sta_lock, flags); @@ -3420,7 +3420,7 @@ il4965_remove_dynamic_key(struct il_priv *il, memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo)); il->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID; - il->stations[sta_id].sta.key.key_offset = WEP_INVALID_OFFSET; + il->stations[sta_id].sta.key.key_offset = keyconf->hw_key_idx; il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index cbf2dc18341f..5d4807c2b56d 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -4767,14 +4767,12 @@ il_bg_watchdog(unsigned long data) return; /* monitor and check for other stuck queues */ - if (il_is_any_associated(il)) { - for (cnt = 0; cnt < il->hw_params.max_txq_num; cnt++) { - /* skip as we already checked the command queue */ - if (cnt == il->cmd_queue) - continue; - if (il_check_stuck_queue(il, cnt)) - return; - } + for (cnt = 0; cnt < il->hw_params.max_txq_num; cnt++) { + /* skip as we already checked the command queue */ + if (cnt == il->cmd_queue) + continue; + if (il_check_stuck_queue(il, cnt)) + return; } mod_timer(&il->watchdog, diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 19f7ee84ae89..e5e8ada4aaf6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -35,17 +35,20 @@ #define IWL6000_UCODE_API_MAX 6 #define IWL6050_UCODE_API_MAX 5 #define IWL6000G2_UCODE_API_MAX 6 +#define IWL6035_UCODE_API_MAX 6 /* Oldest version we won't warn about */ #define IWL6000_UCODE_API_OK 4 #define IWL6000G2_UCODE_API_OK 5 #define IWL6050_UCODE_API_OK 5 #define IWL6000G2B_UCODE_API_OK 6 +#define IWL6035_UCODE_API_OK 6 /* Lowest firmware API version supported */ #define IWL6000_UCODE_API_MIN 4 #define IWL6050_UCODE_API_MIN 4 -#define IWL6000G2_UCODE_API_MIN 4 +#define IWL6000G2_UCODE_API_MIN 5 +#define IWL6035_UCODE_API_MIN 6 /* EEPROM versions */ #define EEPROM_6000_TX_POWER_VERSION (4) @@ -227,9 +230,25 @@ const struct iwl_cfg iwl6030_2bg_cfg = { IWL_DEVICE_6030, }; +#define IWL_DEVICE_6035 \ + .fw_name_pre = IWL6030_FW_PRE, \ + .ucode_api_max = IWL6035_UCODE_API_MAX, \ + .ucode_api_ok = IWL6035_UCODE_API_OK, \ + .ucode_api_min = IWL6035_UCODE_API_MIN, \ + .device_family = IWL_DEVICE_FAMILY_6030, \ + .max_inst_size = IWL60_RTC_INST_SIZE, \ + .max_data_size = IWL60_RTC_DATA_SIZE, \ + .eeprom_ver = EEPROM_6030_EEPROM_VERSION, \ + .eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION, \ + .base_params = &iwl6000_g2_base_params, \ + .bt_params = &iwl6000_bt_params, \ + .need_temp_offset_calib = true, \ + .led_mode = IWL_LED_RF_STATE, \ + .adv_pm = true + const struct iwl_cfg iwl6035_2agn_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6235 AGN", - IWL_DEVICE_6030, + IWL_DEVICE_6035, .ht_params = &iwl6000_ht_params, }; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c index aea07aab3c9e..eb6a8eaf42fc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c @@ -1267,7 +1267,7 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, key_flags |= STA_KEY_MULTICAST_MSK; sta_cmd.key.key_flags = key_flags; - sta_cmd.key.key_offset = WEP_INVALID_OFFSET; + sta_cmd.key.key_offset = keyconf->hw_key_idx; sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK; sta_cmd.mode = STA_CONTROL_MODIFY_MSK; diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c index e7c157e5ebeb..7f97dec8534d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c +++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c @@ -2239,6 +2239,7 @@ static ssize_t iwl_dbgfs_echo_test_write(struct file *file, return count; } +#ifdef CONFIG_IWLWIFI_DEBUG static ssize_t iwl_dbgfs_log_event_read(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) @@ -2276,6 +2277,7 @@ static ssize_t iwl_dbgfs_log_event_write(struct file *file, return count; } +#endif static ssize_t iwl_dbgfs_calib_disabled_read(struct file *file, char __user *user_buf, @@ -2345,7 +2347,9 @@ DEBUGFS_READ_FILE_OPS(bt_traffic); DEBUGFS_READ_WRITE_FILE_OPS(protection_mode); DEBUGFS_READ_FILE_OPS(reply_tx_error); DEBUGFS_WRITE_FILE_OPS(echo_test); +#ifdef CONFIG_IWLWIFI_DEBUG DEBUGFS_READ_WRITE_FILE_OPS(log_event); +#endif DEBUGFS_READ_WRITE_FILE_OPS(calib_disabled); /* @@ -2405,7 +2409,9 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name) DEBUGFS_ADD_FILE(rxon_flags, dir_debug, S_IWUSR); DEBUGFS_ADD_FILE(rxon_filter_flags, dir_debug, S_IWUSR); DEBUGFS_ADD_FILE(echo_test, dir_debug, S_IWUSR); +#ifdef CONFIG_IWLWIFI_DEBUG DEBUGFS_ADD_FILE(log_event, dir_debug, S_IWUSR | S_IRUSR); +#endif if (iwl_advanced_bt_coexist(priv)) DEBUGFS_ADD_FILE(bt_traffic, dir_debug, S_IRUSR); diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index d742900969ea..fac67a526a30 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -861,13 +861,18 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context) /* We have our copies now, allow OS release its copies */ release_firmware(ucode_raw); - complete(&drv->request_firmware_complete); drv->op_mode = iwl_dvm_ops.start(drv->trans, drv->cfg, &drv->fw); if (!drv->op_mode) - goto out_free_fw; + goto out_unbind; + /* + * Complete the firmware request last so that + * a driver unbind (stop) doesn't run while we + * are doing the start() above. + */ + complete(&drv->request_firmware_complete); return; try_again: diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index 50c58911e718..b8e2b223ac36 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -568,28 +568,28 @@ static int iwl_find_otp_image(struct iwl_trans *trans, * iwl_get_max_txpower_avg - get the highest tx power from all chains. * find the highest tx power from all chains for the channel */ -static s8 iwl_get_max_txpower_avg(const struct iwl_cfg *cfg, +static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv, struct iwl_eeprom_enhanced_txpwr *enhanced_txpower, int element, s8 *max_txpower_in_half_dbm) { s8 max_txpower_avg = 0; /* (dBm) */ /* Take the highest tx power from any valid chains */ - if ((cfg->valid_tx_ant & ANT_A) && + if ((priv->hw_params.valid_tx_ant & ANT_A) && (enhanced_txpower[element].chain_a_max > max_txpower_avg)) max_txpower_avg = enhanced_txpower[element].chain_a_max; - if ((cfg->valid_tx_ant & ANT_B) && + if ((priv->hw_params.valid_tx_ant & ANT_B) && (enhanced_txpower[element].chain_b_max > max_txpower_avg)) max_txpower_avg = enhanced_txpower[element].chain_b_max; - if ((cfg->valid_tx_ant & ANT_C) && + if ((priv->hw_params.valid_tx_ant & ANT_C) && (enhanced_txpower[element].chain_c_max > max_txpower_avg)) max_txpower_avg = enhanced_txpower[element].chain_c_max; - if (((cfg->valid_tx_ant == ANT_AB) | - (cfg->valid_tx_ant == ANT_BC) | - (cfg->valid_tx_ant == ANT_AC)) && + if (((priv->hw_params.valid_tx_ant == ANT_AB) | + (priv->hw_params.valid_tx_ant == ANT_BC) | + (priv->hw_params.valid_tx_ant == ANT_AC)) && (enhanced_txpower[element].mimo2_max > max_txpower_avg)) max_txpower_avg = enhanced_txpower[element].mimo2_max; - if ((cfg->valid_tx_ant == ANT_ABC) && + if ((priv->hw_params.valid_tx_ant == ANT_ABC) && (enhanced_txpower[element].mimo3_max > max_txpower_avg)) max_txpower_avg = enhanced_txpower[element].mimo3_max; @@ -691,7 +691,7 @@ static void iwl_eeprom_enhanced_txpower(struct iwl_priv *priv) ((txp->delta_20_in_40 & 0xf0) >> 4), (txp->delta_20_in_40 & 0x0f)); - max_txp_avg = iwl_get_max_txpower_avg(priv->cfg, txp_array, idx, + max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx, &max_txp_avg_halfdbm); /* diff --git a/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/drivers/net/wireless/iwlwifi/iwl-mac80211.c index ab2f4d7500a4..013680332f07 100644 --- a/drivers/net/wireless/iwlwifi/iwl-mac80211.c +++ b/drivers/net/wireless/iwlwifi/iwl-mac80211.c @@ -199,6 +199,7 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, WIPHY_FLAG_DISABLE_BEACON_HINTS | WIPHY_FLAG_IBSS_RSN; +#ifdef CONFIG_PM_SLEEP if (priv->fw->img[IWL_UCODE_WOWLAN].sec[0].len && priv->trans->ops->wowlan_suspend && device_can_wakeup(priv->trans->dev)) { @@ -217,6 +218,7 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, hw->wiphy->wowlan.pattern_max_len = IWLAGN_WOWLAN_MAX_PATTERN_LEN; } +#endif if (iwlwifi_mod_params.power_save) hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT; @@ -249,6 +251,7 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, ret = ieee80211_register_hw(priv->hw); if (ret) { IWL_ERR(priv, "Failed to register hw (error %d)\n", ret); + iwl_leds_exit(priv); return ret; } priv->mac80211_registered = 1; @@ -793,6 +796,18 @@ int iwlagn_mac_sta_state(struct ieee80211_hw *hw, switch (op) { case ADD: ret = iwlagn_mac_sta_add(hw, vif, sta); + if (ret) + break; + /* + * Clear the in-progress flag, the AP station entry was added + * but we'll initialize LQ only when we've associated (which + * would also clear the in-progress flag). This is necessary + * in case we never initialize LQ because association fails. + */ + spin_lock_bh(&priv->sta_lock); + priv->stations[iwl_sta_id(sta)].used &= + ~IWL_STA_UCODE_INPROGRESS; + spin_unlock_bh(&priv->sta_lock); break; case REMOVE: ret = iwlagn_mac_sta_remove(hw, vif, sta); diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index 3b1069290fa9..dfd54662e3e6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -224,6 +224,7 @@ #define SCD_TXFACT (SCD_BASE + 0x10) #define SCD_ACTIVE (SCD_BASE + 0x14) #define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8) +#define SCD_CHAINEXT_EN (SCD_BASE + 0x244) #define SCD_AGGR_SEL (SCD_BASE + 0x248) #define SCD_INTERRUPT_MASK (SCD_BASE + 0x108) diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c index ec6fb395b84d..79c6b91417f9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c +++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c @@ -1058,6 +1058,11 @@ static void iwl_tx_start(struct iwl_trans *trans) iwl_write_prph(trans, SCD_DRAM_BASE_ADDR, trans_pcie->scd_bc_tbls.dma >> 10); + /* The chain extension of the SCD doesn't work well. This feature is + * enabled by default by the HW, so we need to disable it manually. + */ + iwl_write_prph(trans, SCD_CHAINEXT_EN, 0); + /* Enable DMA channel */ for (chan = 0; chan < FH_TCSR_CHNL_NUM ; chan++) iwl_write_direct32(trans, FH_TCSR_CHNL_TX_CONFIG_REG(chan), diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index fb787df01666..a0b7cfd34685 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1555,6 +1555,7 @@ static int hwsim_tx_info_frame_received_nl(struct sk_buff *skb_2, hdr = (struct ieee80211_hdr *) skb->data; mac80211_hwsim_monitor_ack(data2->hw, hdr->addr2); } + txi->flags |= IEEE80211_TX_STAT_ACK; } ieee80211_tx_status_irqsafe(data2->hw, skb); return 0; @@ -1721,6 +1722,24 @@ static void hwsim_exit_netlink(void) "unregister family %i\n", ret); } +static const struct ieee80211_iface_limit hwsim_if_limits[] = { + { .max = 1, .types = BIT(NL80211_IFTYPE_ADHOC) }, + { .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_P2P_CLIENT) | +#ifdef CONFIG_MAC80211_MESH + BIT(NL80211_IFTYPE_MESH_POINT) | +#endif + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_P2P_GO) }, +}; + +static const struct ieee80211_iface_combination hwsim_if_comb = { + .limits = hwsim_if_limits, + .n_limits = ARRAY_SIZE(hwsim_if_limits), + .max_interfaces = 2048, + .num_different_channels = 1, +}; + static int __init init_mac80211_hwsim(void) { int i, err = 0; @@ -1782,6 +1801,9 @@ static int __init init_mac80211_hwsim(void) hw->wiphy->n_addresses = 2; hw->wiphy->addresses = data->addresses; + hw->wiphy->iface_combinations = &hwsim_if_comb; + hw->wiphy->n_iface_combinations = 1; + if (fake_hw_scan) { hw->wiphy->max_scan_ssids = 255; hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN; diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c index 9c44088054dd..900ee129e825 100644 --- a/drivers/net/wireless/mwifiex/11n_rxreorder.c +++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c @@ -256,7 +256,8 @@ mwifiex_11n_create_rx_reorder_tbl(struct mwifiex_private *priv, u8 *ta, else last_seq = priv->rx_seq[tid]; - if (last_seq >= new_node->start_win) + if (last_seq != MWIFIEX_DEF_11N_RX_SEQ_NUM && + last_seq >= new_node->start_win) new_node->start_win = last_seq + 1; new_node->win_size = win_size; @@ -596,5 +597,5 @@ void mwifiex_11n_cleanup_reorder_tbl(struct mwifiex_private *priv) spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags); INIT_LIST_HEAD(&priv->rx_reorder_tbl_ptr); - memset(priv->rx_seq, 0, sizeof(priv->rx_seq)); + mwifiex_reset_11n_rx_seq_num(priv); } diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.h b/drivers/net/wireless/mwifiex/11n_rxreorder.h index f1bffebabc60..6c9815a0f5d8 100644 --- a/drivers/net/wireless/mwifiex/11n_rxreorder.h +++ b/drivers/net/wireless/mwifiex/11n_rxreorder.h @@ -37,6 +37,13 @@ #define ADDBA_RSP_STATUS_ACCEPT 0 +#define MWIFIEX_DEF_11N_RX_SEQ_NUM 0xffff + +static inline void mwifiex_reset_11n_rx_seq_num(struct mwifiex_private *priv) +{ + memset(priv->rx_seq, 0xff, sizeof(priv->rx_seq)); +} + int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *, u16 seqNum, u16 tid, u8 *ta, diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 87671446e24b..5c7fd185373c 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -948,6 +948,20 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy, bss_cfg->ssid.ssid_len = params->ssid_len; } + switch (params->hidden_ssid) { + case NL80211_HIDDEN_SSID_NOT_IN_USE: + bss_cfg->bcast_ssid_ctl = 1; + break; + case NL80211_HIDDEN_SSID_ZERO_LEN: + bss_cfg->bcast_ssid_ctl = 0; + break; + case NL80211_HIDDEN_SSID_ZERO_CONTENTS: + /* firmware doesn't support this type of hidden SSID */ + default: + kfree(bss_cfg); + return -EINVAL; + } + if (mwifiex_set_secure_params(priv, bss_cfg, params)) { kfree(bss_cfg); wiphy_err(wiphy, "Failed to parse secuirty parameters!\n"); @@ -1471,7 +1485,7 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev; if (!adapter) - return NULL; + return ERR_PTR(-EFAULT); switch (type) { case NL80211_IFTYPE_UNSPECIFIED: @@ -1481,12 +1495,12 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, if (priv->bss_mode) { wiphy_err(wiphy, "cannot create multiple sta/adhoc ifaces\n"); - return NULL; + return ERR_PTR(-EINVAL); } wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); if (!wdev) - return NULL; + return ERR_PTR(-ENOMEM); wdev->wiphy = wiphy; priv->wdev = wdev; @@ -1509,12 +1523,12 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, if (priv->bss_mode) { wiphy_err(wiphy, "Can't create multiple AP interfaces"); - return NULL; + return ERR_PTR(-EINVAL); } wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); if (!wdev) - return NULL; + return ERR_PTR(-ENOMEM); priv->wdev = wdev; wdev->wiphy = wiphy; @@ -1531,14 +1545,15 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, break; default: wiphy_err(wiphy, "type not supported\n"); - return NULL; + return ERR_PTR(-EINVAL); } dev = alloc_netdev_mq(sizeof(struct mwifiex_private *), name, ether_setup, 1); if (!dev) { wiphy_err(wiphy, "no memory available for netdevice\n"); - goto error; + priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; + return ERR_PTR(-ENOMEM); } mwifiex_init_priv_params(priv, dev); @@ -1569,7 +1584,9 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, /* Register network device */ if (register_netdevice(dev)) { wiphy_err(wiphy, "cannot register virtual network device\n"); - goto error; + free_netdev(dev); + priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; + return ERR_PTR(-EFAULT); } sema_init(&priv->async_sem, 1); @@ -1581,12 +1598,6 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, mwifiex_dev_debugfs_init(priv); #endif return dev; -error: - if (dev && (dev->reg_state == NETREG_UNREGISTERED)) - free_netdev(dev); - priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; - - return NULL; } EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf); diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h index 9f674bbebe65..561452a5c818 100644 --- a/drivers/net/wireless/mwifiex/fw.h +++ b/drivers/net/wireless/mwifiex/fw.h @@ -122,6 +122,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER { #define TLV_TYPE_CHANNELBANDLIST (PROPRIETARY_TLV_BASE_ID + 42) #define TLV_TYPE_UAP_BEACON_PERIOD (PROPRIETARY_TLV_BASE_ID + 44) #define TLV_TYPE_UAP_DTIM_PERIOD (PROPRIETARY_TLV_BASE_ID + 45) +#define TLV_TYPE_UAP_BCAST_SSID (PROPRIETARY_TLV_BASE_ID + 48) #define TLV_TYPE_UAP_RTS_THRESHOLD (PROPRIETARY_TLV_BASE_ID + 51) #define TLV_TYPE_UAP_WPA_PASSPHRASE (PROPRIETARY_TLV_BASE_ID + 60) #define TLV_TYPE_UAP_ENCRY_PROTOCOL (PROPRIETARY_TLV_BASE_ID + 64) @@ -1209,6 +1210,11 @@ struct host_cmd_tlv_ssid { u8 ssid[0]; } __packed; +struct host_cmd_tlv_bcast_ssid { + struct host_cmd_tlv tlv; + u8 bcast_ctl; +} __packed; + struct host_cmd_tlv_beacon_period { struct host_cmd_tlv tlv; __le16 period; diff --git a/drivers/net/wireless/mwifiex/ie.c b/drivers/net/wireless/mwifiex/ie.c index ceb82cd749cc..383820a52beb 100644 --- a/drivers/net/wireless/mwifiex/ie.c +++ b/drivers/net/wireless/mwifiex/ie.c @@ -213,6 +213,7 @@ mwifiex_update_uap_custom_ie(struct mwifiex_private *priv, /* save assoc resp ie index after auto-indexing */ *assoc_idx = *((u16 *)pos); + kfree(ap_custom_ie); return ret; } diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c index e0377473282f..fc8a9bfa1248 100644 --- a/drivers/net/wireless/mwifiex/sdio.c +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -978,10 +978,10 @@ static int mwifiex_decode_rx_packet(struct mwifiex_adapter *adapter, dev_dbg(adapter->dev, "info: --- Rx: Event ---\n"); adapter->event_cause = *(u32 *) skb->data; - skb_pull(skb, MWIFIEX_EVENT_HEADER_LEN); - if ((skb->len > 0) && (skb->len < MAX_EVENT_SIZE)) - memcpy(adapter->event_body, skb->data, skb->len); + memcpy(adapter->event_body, + skb->data + MWIFIEX_EVENT_HEADER_LEN, + skb->len); /* event cause has been saved to adapter->event_cause */ adapter->event_received = true; diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c index 4ace5a3dcd23..11e731f3581c 100644 --- a/drivers/net/wireless/mwifiex/sta_event.c +++ b/drivers/net/wireless/mwifiex/sta_event.c @@ -406,9 +406,9 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv) break; case EVENT_UAP_STA_ASSOC: - skb_pull(adapter->event_skb, MWIFIEX_UAP_EVENT_EXTRA_HEADER); memset(&sinfo, 0, sizeof(sinfo)); - event = (struct mwifiex_assoc_event *)adapter->event_skb->data; + event = (struct mwifiex_assoc_event *) + (adapter->event_body + MWIFIEX_UAP_EVENT_EXTRA_HEADER); if (le16_to_cpu(event->type) == TLV_TYPE_UAP_MGMT_FRAME) { len = -1; @@ -433,9 +433,8 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv) GFP_KERNEL); break; case EVENT_UAP_STA_DEAUTH: - skb_pull(adapter->event_skb, MWIFIEX_UAP_EVENT_EXTRA_HEADER); - cfg80211_del_sta(priv->netdev, adapter->event_skb->data, - GFP_KERNEL); + cfg80211_del_sta(priv->netdev, adapter->event_body + + MWIFIEX_UAP_EVENT_EXTRA_HEADER, GFP_KERNEL); break; case EVENT_UAP_BSS_IDLE: priv->media_connected = false; diff --git a/drivers/net/wireless/mwifiex/txrx.c b/drivers/net/wireless/mwifiex/txrx.c index e2faec4db108..cecb27283196 100644 --- a/drivers/net/wireless/mwifiex/txrx.c +++ b/drivers/net/wireless/mwifiex/txrx.c @@ -161,15 +161,11 @@ int mwifiex_write_data_complete(struct mwifiex_adapter *adapter, goto done; for (i = 0; i < adapter->priv_num; i++) { - tpriv = adapter->priv[i]; - if ((GET_BSS_ROLE(tpriv) == MWIFIEX_BSS_ROLE_STA) && - (tpriv->media_connected)) { - if (netif_queue_stopped(tpriv->netdev)) - mwifiex_wake_up_net_dev_queue(tpriv->netdev, - adapter); - } + if (tpriv->media_connected && + netif_queue_stopped(tpriv->netdev)) + mwifiex_wake_up_net_dev_queue(tpriv->netdev, adapter); } done: dev_kfree_skb_any(skb); diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c index 76dfbc42a732..89f9a2a45de3 100644 --- a/drivers/net/wireless/mwifiex/uap_cmd.c +++ b/drivers/net/wireless/mwifiex/uap_cmd.c @@ -27,6 +27,17 @@ int mwifiex_set_secure_params(struct mwifiex_private *priv, struct cfg80211_ap_settings *params) { int i; + if (!params->privacy) { + bss_config->protocol = PROTOCOL_NO_SECURITY; + bss_config->key_mgmt = KEY_MGMT_NONE; + bss_config->wpa_cfg.length = 0; + priv->sec_info.wep_enabled = 0; + priv->sec_info.wpa_enabled = 0; + priv->sec_info.wpa2_enabled = 0; + + return 0; + } + switch (params->auth_type) { case NL80211_AUTHTYPE_OPEN_SYSTEM: bss_config->auth_mode = WLAN_AUTH_OPEN; @@ -132,6 +143,7 @@ mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size) struct host_cmd_tlv_dtim_period *dtim_period; struct host_cmd_tlv_beacon_period *beacon_period; struct host_cmd_tlv_ssid *ssid; + struct host_cmd_tlv_bcast_ssid *bcast_ssid; struct host_cmd_tlv_channel_band *chan_band; struct host_cmd_tlv_frag_threshold *frag_threshold; struct host_cmd_tlv_rts_threshold *rts_threshold; @@ -153,6 +165,14 @@ mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size) cmd_size += sizeof(struct host_cmd_tlv) + bss_cfg->ssid.ssid_len; tlv += sizeof(struct host_cmd_tlv) + bss_cfg->ssid.ssid_len; + + bcast_ssid = (struct host_cmd_tlv_bcast_ssid *)tlv; + bcast_ssid->tlv.type = cpu_to_le16(TLV_TYPE_UAP_BCAST_SSID); + bcast_ssid->tlv.len = + cpu_to_le16(sizeof(bcast_ssid->bcast_ctl)); + bcast_ssid->bcast_ctl = bss_cfg->bcast_ssid_ctl; + cmd_size += sizeof(struct host_cmd_tlv_bcast_ssid); + tlv += sizeof(struct host_cmd_tlv_bcast_ssid); } if (bss_cfg->channel && bss_cfg->channel <= MAX_CHANNEL_BAND_BG) { chan_band = (struct host_cmd_tlv_channel_band *)tlv; @@ -416,6 +436,7 @@ int mwifiex_uap_set_channel(struct mwifiex_private *priv, int channel) if (!bss_cfg) return -ENOMEM; + mwifiex_set_sys_config_invalid_data(bss_cfg); bss_cfg->band_cfg = BAND_CONFIG_MANUAL; bss_cfg->channel = channel; diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c index 49ebf20c56eb..22a5916564b8 100644 --- a/drivers/net/wireless/mwifiex/usb.c +++ b/drivers/net/wireless/mwifiex/usb.c @@ -49,6 +49,7 @@ static int mwifiex_usb_recv(struct mwifiex_adapter *adapter, struct device *dev = adapter->dev; u32 recv_type; __le32 tmp; + int ret; if (adapter->hs_activated) mwifiex_process_hs_config(adapter); @@ -69,16 +70,19 @@ static int mwifiex_usb_recv(struct mwifiex_adapter *adapter, case MWIFIEX_USB_TYPE_CMD: if (skb->len > MWIFIEX_SIZE_OF_CMD_BUFFER) { dev_err(dev, "CMD: skb->len too large\n"); - return -1; + ret = -1; + goto exit_restore_skb; } else if (!adapter->curr_cmd) { dev_dbg(dev, "CMD: no curr_cmd\n"); if (adapter->ps_state == PS_STATE_SLEEP_CFM) { mwifiex_process_sleep_confirm_resp( adapter, skb->data, skb->len); - return 0; + ret = 0; + goto exit_restore_skb; } - return -1; + ret = -1; + goto exit_restore_skb; } adapter->curr_cmd->resp_skb = skb; @@ -87,20 +91,22 @@ static int mwifiex_usb_recv(struct mwifiex_adapter *adapter, case MWIFIEX_USB_TYPE_EVENT: if (skb->len < sizeof(u32)) { dev_err(dev, "EVENT: skb->len too small\n"); - return -1; + ret = -1; + goto exit_restore_skb; } skb_copy_from_linear_data(skb, &tmp, sizeof(u32)); adapter->event_cause = le32_to_cpu(tmp); - skb_pull(skb, sizeof(u32)); dev_dbg(dev, "event_cause %#x\n", adapter->event_cause); if (skb->len > MAX_EVENT_SIZE) { dev_err(dev, "EVENT: event body too large\n"); - return -1; + ret = -1; + goto exit_restore_skb; } - skb_copy_from_linear_data(skb, adapter->event_body, - skb->len); + memcpy(adapter->event_body, skb->data + + MWIFIEX_EVENT_HEADER_LEN, skb->len); + adapter->event_received = true; adapter->event_skb = skb; break; @@ -124,6 +130,12 @@ static int mwifiex_usb_recv(struct mwifiex_adapter *adapter, } return -EINPROGRESS; + +exit_restore_skb: + /* The buffer will be reused for further cmds/events */ + skb_push(skb, INTF_HEADER_LEN); + + return ret; } static void mwifiex_usb_rx_complete(struct urb *urb) diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c index f3fc65515857..3fa4d4176993 100644 --- a/drivers/net/wireless/mwifiex/wmm.c +++ b/drivers/net/wireless/mwifiex/wmm.c @@ -404,6 +404,8 @@ mwifiex_wmm_init(struct mwifiex_adapter *adapter) priv->add_ba_param.tx_win_size = MWIFIEX_AMPDU_DEF_TXWINSIZE; priv->add_ba_param.rx_win_size = MWIFIEX_AMPDU_DEF_RXWINSIZE; + mwifiex_reset_11n_rx_seq_num(priv); + atomic_set(&priv->wmm.tx_pkts_queued, 0); atomic_set(&priv->wmm.highest_queued_prio, HIGH_PRIO_TID); } @@ -1221,6 +1223,7 @@ mwifiex_dequeue_tx_packet(struct mwifiex_adapter *adapter) if (!ptr->is_11n_enabled || mwifiex_is_ba_stream_setup(priv, ptr, tid) || + priv->wps.session_enable || ((priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled) && !priv->wpa_is_gtk_set)) { diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 2e9e6af21362..dfcd02ab6cae 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -2110,7 +2110,7 @@ resize_buf: while (check_bssid_list_item(bssid, bssid_len, buf, len)) { if (rndis_bss_info_update(usbdev, bssid) && match_bssid && matched) { - if (!ether_addr_equal(bssid->mac, match_bssid)) + if (ether_addr_equal(bssid->mac, match_bssid)) *matched = true; } diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index ca36cccaba31..8f754025b06e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -396,8 +396,7 @@ struct rt2x00_intf { * for hardware which doesn't support hardware * sequence counting. */ - spinlock_t seqlock; - u16 seqno; + atomic_t seqno; }; static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif) diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index b49773ef72f2..dd24b2663b5e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -277,7 +277,6 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, else rt2x00dev->intf_sta_count++; - spin_lock_init(&intf->seqlock); mutex_init(&intf->beacon_skb_mutex); intf->beacon = entry; diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 4c662eccf53c..2fd830103415 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -207,6 +207,7 @@ static void rt2x00queue_create_tx_descriptor_seq(struct rt2x00_dev *rt2x00dev, struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); + u16 seqno; if (!(tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)) return; @@ -238,15 +239,13 @@ static void rt2x00queue_create_tx_descriptor_seq(struct rt2x00_dev *rt2x00dev, * sequence counting per-frame, since those will override the * sequence counter given by mac80211. */ - spin_lock(&intf->seqlock); - if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) - intf->seqno += 0x10; + seqno = atomic_add_return(0x10, &intf->seqno); + else + seqno = atomic_read(&intf->seqno); + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); - hdr->seq_ctrl |= cpu_to_le16(intf->seqno); - - spin_unlock(&intf->seqlock); - + hdr->seq_ctrl |= cpu_to_le16(seqno); } static void rt2x00queue_create_tx_descriptor_plcp(struct rt2x00_dev *rt2x00dev, diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index d357d1ed92f6..74ecc33fdd90 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -436,8 +436,8 @@ void rt2x00usb_kick_queue(struct data_queue *queue) case QID_RX: if (!rt2x00queue_full(queue)) rt2x00queue_for_each_entry(queue, - Q_INDEX_DONE, Q_INDEX, + Q_INDEX_DONE, NULL, rt2x00usb_kick_rx_entry); break; diff --git a/drivers/net/wireless/rtl818x/rtl8187/leds.c b/drivers/net/wireless/rtl818x/rtl8187/leds.c index 2e0de2f5f0f9..c2d5b495c179 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/leds.c +++ b/drivers/net/wireless/rtl818x/rtl8187/leds.c @@ -117,7 +117,7 @@ static void rtl8187_led_brightness_set(struct led_classdev *led_dev, radio_on = true; } else if (radio_on) { radio_on = false; - cancel_delayed_work_sync(&priv->led_on); + cancel_delayed_work(&priv->led_on); ieee80211_queue_delayed_work(hw, &priv->led_off, 0); } } else if (radio_on) { diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index d228358e6a40..9970c2b1b199 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -301,9 +301,11 @@ static struct usb_device_id rtl8192c_usb_ids[] = { {RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/ {RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/ {RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/ + {RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/ {RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/ {RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/ {RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/ + {RTL_USB_DEVICE(0x4856, 0x0091, rtl92cu_hal_cfg)}, /*NetweeN - Feixun*/ /* HP - Lite-On ,8188CUS Slim Combo */ {RTL_USB_DEVICE(0x103c, 0x1629, rtl92cu_hal_cfg)}, {RTL_USB_DEVICE(0x13d3, 0x3357, rtl92cu_hal_cfg)}, /* AzureWave */ @@ -346,6 +348,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = { {RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/ {RTL_USB_DEVICE(0x0846, 0x9021, rtl92cu_hal_cfg)}, /*Netgear-Sercomm*/ {RTL_USB_DEVICE(0x0b05, 0x17ab, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/ + {RTL_USB_DEVICE(0x0bda, 0x8186, rtl92cu_hal_cfg)}, /*Realtek 92CE-VAU*/ {RTL_USB_DEVICE(0x0df6, 0x0061, rtl92cu_hal_cfg)}, /*Sitecom-Edimax*/ {RTL_USB_DEVICE(0x0e66, 0x0019, rtl92cu_hal_cfg)}, /*Hawking-Edimax*/ {RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/ diff --git a/drivers/net/wireless/ti/wl1251/acx.c b/drivers/net/wireless/ti/wl1251/acx.c index ad87a1ac6462..db6430c1a084 100644 --- a/drivers/net/wireless/ti/wl1251/acx.c +++ b/drivers/net/wireless/ti/wl1251/acx.c @@ -869,7 +869,7 @@ int wl1251_acx_tsf_info(struct wl1251 *wl, u64 *mactime) } *mactime = tsf_info->current_tsf_lsb | - (tsf_info->current_tsf_msb << 31); + ((u64)tsf_info->current_tsf_msb << 32); out: kfree(tsf_info); diff --git a/drivers/net/wireless/ti/wl1251/event.c b/drivers/net/wireless/ti/wl1251/event.c index 9f15ccaf8f05..5ec50a476a69 100644 --- a/drivers/net/wireless/ti/wl1251/event.c +++ b/drivers/net/wireless/ti/wl1251/event.c @@ -76,8 +76,7 @@ static int wl1251_event_process(struct wl1251 *wl, struct event_mailbox *mbox) } } - if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID && - wl->station_mode != STATION_ACTIVE_MODE) { + if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID) { wl1251_debug(DEBUG_EVENT, "SYNCHRONIZATION_TIMEOUT_EVENT"); /* indicate to the stack, that beacons have been lost */ diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c index 87f6305bda2c..567660cd2fcd 100644 --- a/drivers/net/wireless/ti/wl1251/spi.c +++ b/drivers/net/wireless/ti/wl1251/spi.c @@ -73,6 +73,8 @@ static void wl1251_spi_reset(struct wl1251 *wl) spi_sync(wl_to_spi(wl), &m); wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN); + + kfree(cmd); } static void wl1251_spi_wake(struct wl1251 *wl) @@ -127,6 +129,8 @@ static void wl1251_spi_wake(struct wl1251 *wl) spi_sync(wl_to_spi(wl), &m); wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN); + + kfree(cmd); } static void wl1251_spi_reset_wake(struct wl1251 *wl) diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig index 54156b0b5c2d..d7b907e67170 100644 --- a/drivers/net/wireless/ti/wlcore/Kconfig +++ b/drivers/net/wireless/ti/wlcore/Kconfig @@ -1,7 +1,6 @@ config WLCORE tristate "TI wlcore support" depends on WL_TI && GENERIC_HARDIRQS && MAC80211 - depends on INET select FW_LOADER ---help--- This module contains the main code for TI WLAN chips. It abstracts diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 2027afe405fe..30899901aef5 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1935,14 +1935,14 @@ static int __devexit xennet_remove(struct xenbus_device *dev) dev_dbg(&dev->dev, "%s\n", dev->nodename); - unregister_netdev(info->netdev); - xennet_disconnect_backend(info); - del_timer_sync(&info->rx_refill_timer); - xennet_sysfs_delif(info->netdev); + unregister_netdev(info->netdev); + + del_timer_sync(&info->rx_refill_timer); + free_percpu(info->stats); free_netdev(info->netdev); diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 343ad29e211c..e44f8c2d239d 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -317,10 +317,9 @@ static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *l for(; lookup->compatible != NULL; lookup++) { if (!of_device_is_compatible(np, lookup->compatible)) continue; - if (of_address_to_resource(np, 0, &res)) - continue; - if (res.start != lookup->phys_addr) - continue; + if (!of_address_to_resource(np, 0, &res)) + if (res.start != lookup->phys_addr) + continue; pr_debug("%s: devname=%s\n", np->full_name, lookup->name); return lookup; } @@ -462,4 +461,5 @@ int of_platform_populate(struct device_node *root, of_node_put(root); return rc; } +EXPORT_SYMBOL_GPL(of_platform_populate); #endif /* CONFIG_OF_ADDRESS */ diff --git a/drivers/oprofile/oprofile_perf.c b/drivers/oprofile/oprofile_perf.c index da14432806c6..efc4b7f308cf 100644 --- a/drivers/oprofile/oprofile_perf.c +++ b/drivers/oprofile/oprofile_perf.c @@ -25,7 +25,7 @@ static int oprofile_perf_enabled; static DEFINE_MUTEX(oprofile_perf_mutex); static struct op_counter_config *counter_config; -static struct perf_event **perf_events[nr_cpumask_bits]; +static struct perf_event **perf_events[NR_CPUS]; static int num_counters; /* diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index bf0cee629b60..099f46cd8e87 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -748,6 +748,18 @@ static int pci_pm_suspend_noirq(struct device *dev) pci_pm_set_unknown_state(pci_dev); + /* + * Some BIOSes from ASUS have a bug: If a USB EHCI host controller's + * PCI COMMAND register isn't 0, the BIOS assumes that the controller + * hasn't been quiesced and tries to turn it off. If the controller + * is already in D3, this can hang or cause memory corruption. + * + * Since the value of the COMMAND register doesn't matter once the + * device has been suspended, we can safely set it to 0 here. + */ + if (pci_dev->class == PCI_CLASS_SERIAL_USB_EHCI) + pci_write_config_word(pci_dev, PCI_COMMAND, 0); + return 0; } diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index c3b331b74fa0..0cc053af70bd 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -61,7 +61,7 @@ static LIST_HEAD(pinctrl_maps); list_for_each_entry(_maps_node_, &pinctrl_maps, node) \ for (_i_ = 0, _map_ = &_maps_node_->maps[_i_]; \ _i_ < _maps_node_->num_maps; \ - i++, _map_ = &_maps_node_->maps[_i_]) + _i_++, _map_ = &_maps_node_->maps[_i_]) /** * pinctrl_provide_dummies() - indicate if pinctrl provides dummy state support diff --git a/drivers/pinctrl/pinctrl-imx.c b/drivers/pinctrl/pinctrl-imx.c index f6e7c670906c..90c837f469a6 100644 --- a/drivers/pinctrl/pinctrl-imx.c +++ b/drivers/pinctrl/pinctrl-imx.c @@ -27,16 +27,16 @@ #include "core.h" #include "pinctrl-imx.h" -#define IMX_PMX_DUMP(info, p, m, c, n) \ -{ \ - int i, j; \ - printk("Format: Pin Mux Config\n"); \ - for (i = 0; i < n; i++) { \ - j = p[i]; \ - printk("%s %d 0x%lx\n", \ - info->pins[j].name, \ - m[i], c[i]); \ - } \ +#define IMX_PMX_DUMP(info, p, m, c, n) \ +{ \ + int i, j; \ + printk(KERN_DEBUG "Format: Pin Mux Config\n"); \ + for (i = 0; i < n; i++) { \ + j = p[i]; \ + printk(KERN_DEBUG "%s %d 0x%lx\n", \ + info->pins[j].name, \ + m[i], c[i]); \ + } \ } /* The bits in CONFIG cell defined in binding doc*/ @@ -173,8 +173,10 @@ static int imx_dt_node_to_map(struct pinctrl_dev *pctldev, /* create mux map */ parent = of_get_parent(np); - if (!parent) + if (!parent) { + kfree(new_map); return -EINVAL; + } new_map[0].type = PIN_MAP_TYPE_MUX_GROUP; new_map[0].data.mux.function = parent->name; new_map[0].data.mux.group = np->name; @@ -193,7 +195,7 @@ static int imx_dt_node_to_map(struct pinctrl_dev *pctldev, } dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n", - new_map->data.mux.function, new_map->data.mux.group, map_num); + (*map)->data.mux.function, (*map)->data.mux.group, map_num); return 0; } @@ -201,10 +203,7 @@ static int imx_dt_node_to_map(struct pinctrl_dev *pctldev, static void imx_dt_free_map(struct pinctrl_dev *pctldev, struct pinctrl_map *map, unsigned num_maps) { - int i; - - for (i = 0; i < num_maps; i++) - kfree(map); + kfree(map); } static struct pinctrl_ops imx_pctrl_ops = { @@ -478,6 +477,7 @@ static int __devinit imx_pinctrl_parse_groups(struct device_node *np, #ifdef DEBUG IMX_PMX_DUMP(info, grp->pins, grp->mux_mode, grp->configs, grp->npins); #endif + return 0; } diff --git a/drivers/pinctrl/pinctrl-imx6q.c b/drivers/pinctrl/pinctrl-imx6q.c index 7737d4d71a3c..e9bf71fbedca 100644 --- a/drivers/pinctrl/pinctrl-imx6q.c +++ b/drivers/pinctrl/pinctrl-imx6q.c @@ -1950,6 +1950,8 @@ static struct imx_pin_reg imx6q_pin_regs[] = { IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 5, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__GPIO_1_12 */ IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 6, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__SJC_DONE */ IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 7, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 */ + IMX_PIN_REG(MX6Q_PAD_ENET_RX_ER, 0x04EC, 0x01D8, 0, 0x0000, 0), /* MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID */ + IMX_PIN_REG(MX6Q_PAD_GPIO_1, 0x05F4, 0x0224, 3, 0x0000, 0), /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */ }; /* Pad names for the pinmux subsystem */ diff --git a/drivers/pinctrl/pinctrl-mxs.c b/drivers/pinctrl/pinctrl-mxs.c index 556e45a213eb..4ba4636b6a4a 100644 --- a/drivers/pinctrl/pinctrl-mxs.c +++ b/drivers/pinctrl/pinctrl-mxs.c @@ -107,8 +107,10 @@ static int mxs_dt_node_to_map(struct pinctrl_dev *pctldev, /* Compose group name */ group = kzalloc(length, GFP_KERNEL); - if (!group) - return -ENOMEM; + if (!group) { + ret = -ENOMEM; + goto free; + } snprintf(group, length, "%s.%d", np->name, reg); new_map[i].data.mux.group = group; i++; @@ -118,7 +120,7 @@ static int mxs_dt_node_to_map(struct pinctrl_dev *pctldev, pconfig = kmemdup(&config, sizeof(config), GFP_KERNEL); if (!pconfig) { ret = -ENOMEM; - goto free; + goto free_group; } new_map[i].type = PIN_MAP_TYPE_CONFIGS_GROUP; @@ -133,6 +135,9 @@ static int mxs_dt_node_to_map(struct pinctrl_dev *pctldev, return 0; +free_group: + if (!purecfg) + kfree(group); free: kfree(new_map); return ret; @@ -511,6 +516,7 @@ int __devinit mxs_pinctrl_probe(struct platform_device *pdev, return 0; err: + platform_set_drvdata(pdev, NULL); iounmap(d->base); return ret; } @@ -520,6 +526,7 @@ int __devexit mxs_pinctrl_remove(struct platform_device *pdev) { struct mxs_pinctrl_data *d = platform_get_drvdata(pdev); + platform_set_drvdata(pdev, NULL); pinctrl_unregister(d->pctl); iounmap(d->base); diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index b26395d16347..3e7e47d6b385 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -673,7 +673,7 @@ static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip, * wakeup is anyhow controlled by the RIMSC and FIMSC registers. */ if (nmk_chip->sleepmode && on) { - __nmk_gpio_set_slpm(nmk_chip, gpio % nmk_chip->chip.base, + __nmk_gpio_set_slpm(nmk_chip, gpio % NMK_GPIO_PER_CHIP, NMK_GPIO_SLPM_WAKEUP_ENABLE); } @@ -1246,6 +1246,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) ret = PTR_ERR(clk); goto out_unmap; } + clk_prepare(clk); nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL); if (!nmk_chip) { @@ -1437,7 +1438,27 @@ static int nmk_pmx_enable(struct pinctrl_dev *pctldev, unsigned function, dev_dbg(npct->dev, "enable group %s, %u pins\n", g->name, g->npins); - /* Handle this special glitch on altfunction C */ + /* + * If we're setting altfunc C by setting both AFSLA and AFSLB to 1, + * we may pass through an undesired state. In this case we take + * some extra care. + * + * Safe sequence used to switch IOs between GPIO and Alternate-C mode: + * - Save SLPM registers (since we have a shadow register in the + * nmk_chip we're using that as backup) + * - Set SLPM=0 for the IOs you want to switch and others to 1 + * - Configure the GPIO registers for the IOs that are being switched + * - Set IOFORCE=1 + * - Modify the AFLSA/B registers for the IOs that are being switched + * - Set IOFORCE=0 + * - Restore SLPM registers + * - Any spurious wake up event during switch sequence to be ignored + * and cleared + * + * We REALLY need to save ALL slpm registers, because the external + * IOFORCE will switch *all* ports to their sleepmode setting to as + * to avoid glitches. (Not just one port!) + */ glitch = (g->altsetting == NMK_GPIO_ALT_C); if (glitch) { diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c index ba15b1a29e52..e9f8e7d11001 100644 --- a/drivers/pinctrl/pinctrl-sirf.c +++ b/drivers/pinctrl/pinctrl-sirf.c @@ -1184,7 +1184,7 @@ out_no_gpio_remap: return ret; } -static const struct of_device_id pinmux_ids[] = { +static const struct of_device_id pinmux_ids[] __devinitconst = { { .compatible = "sirf,prima2-gpio-pinmux" }, {} }; diff --git a/drivers/pinctrl/spear/pinctrl-spear.c b/drivers/pinctrl/spear/pinctrl-spear.c index 5ae50aadf885..b3f6b2873fdd 100644 --- a/drivers/pinctrl/spear/pinctrl-spear.c +++ b/drivers/pinctrl/spear/pinctrl-spear.c @@ -2,7 +2,7 @@ * Driver for the ST Microelectronics SPEAr pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * Inspired from: * - U300 Pinctl drivers diff --git a/drivers/pinctrl/spear/pinctrl-spear.h b/drivers/pinctrl/spear/pinctrl-spear.h index 9155783bb47f..d950eb78d939 100644 --- a/drivers/pinctrl/spear/pinctrl-spear.h +++ b/drivers/pinctrl/spear/pinctrl-spear.h @@ -2,7 +2,7 @@ * Driver header file for the ST Microelectronics SPEAr pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/pinctrl/spear/pinctrl-spear1310.c b/drivers/pinctrl/spear/pinctrl-spear1310.c index fff168be7f00..d6cca8c81b92 100644 --- a/drivers/pinctrl/spear/pinctrl-spear1310.c +++ b/drivers/pinctrl/spear/pinctrl-spear1310.c @@ -2,7 +2,7 @@ * Driver for the ST Microelectronics SPEAr1310 pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -2192,7 +2192,7 @@ static void __exit spear1310_pinctrl_exit(void) } module_exit(spear1310_pinctrl_exit); -MODULE_AUTHOR("Viresh Kumar "); +MODULE_AUTHOR("Viresh Kumar "); MODULE_DESCRIPTION("ST Microelectronics SPEAr1310 pinctrl driver"); MODULE_LICENSE("GPL v2"); MODULE_DEVICE_TABLE(of, spear1310_pinctrl_of_match); diff --git a/drivers/pinctrl/spear/pinctrl-spear1340.c b/drivers/pinctrl/spear/pinctrl-spear1340.c index a8ab2a6f51bf..a0eb057e55bd 100644 --- a/drivers/pinctrl/spear/pinctrl-spear1340.c +++ b/drivers/pinctrl/spear/pinctrl-spear1340.c @@ -2,7 +2,7 @@ * Driver for the ST Microelectronics SPEAr1340 pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -1983,7 +1983,7 @@ static void __exit spear1340_pinctrl_exit(void) } module_exit(spear1340_pinctrl_exit); -MODULE_AUTHOR("Viresh Kumar "); +MODULE_AUTHOR("Viresh Kumar "); MODULE_DESCRIPTION("ST Microelectronics SPEAr1340 pinctrl driver"); MODULE_LICENSE("GPL v2"); MODULE_DEVICE_TABLE(of, spear1340_pinctrl_of_match); diff --git a/drivers/pinctrl/spear/pinctrl-spear300.c b/drivers/pinctrl/spear/pinctrl-spear300.c index 9c82a35e4e78..4dfc2849b172 100644 --- a/drivers/pinctrl/spear/pinctrl-spear300.c +++ b/drivers/pinctrl/spear/pinctrl-spear300.c @@ -2,7 +2,7 @@ * Driver for the ST Microelectronics SPEAr300 pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -702,7 +702,7 @@ static void __exit spear300_pinctrl_exit(void) } module_exit(spear300_pinctrl_exit); -MODULE_AUTHOR("Viresh Kumar "); +MODULE_AUTHOR("Viresh Kumar "); MODULE_DESCRIPTION("ST Microelectronics SPEAr300 pinctrl driver"); MODULE_LICENSE("GPL v2"); MODULE_DEVICE_TABLE(of, spear300_pinctrl_of_match); diff --git a/drivers/pinctrl/spear/pinctrl-spear310.c b/drivers/pinctrl/spear/pinctrl-spear310.c index 1a9707605125..96883693fb7e 100644 --- a/drivers/pinctrl/spear/pinctrl-spear310.c +++ b/drivers/pinctrl/spear/pinctrl-spear310.c @@ -2,7 +2,7 @@ * Driver for the ST Microelectronics SPEAr310 pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -425,7 +425,7 @@ static void __exit spear310_pinctrl_exit(void) } module_exit(spear310_pinctrl_exit); -MODULE_AUTHOR("Viresh Kumar "); +MODULE_AUTHOR("Viresh Kumar "); MODULE_DESCRIPTION("ST Microelectronics SPEAr310 pinctrl driver"); MODULE_LICENSE("GPL v2"); MODULE_DEVICE_TABLE(of, SPEAr310_pinctrl_of_match); diff --git a/drivers/pinctrl/spear/pinctrl-spear320.c b/drivers/pinctrl/spear/pinctrl-spear320.c index de726e6c283a..020b1e0bdb3e 100644 --- a/drivers/pinctrl/spear/pinctrl-spear320.c +++ b/drivers/pinctrl/spear/pinctrl-spear320.c @@ -2,7 +2,7 @@ * Driver for the ST Microelectronics SPEAr320 pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -3462,7 +3462,7 @@ static void __exit spear320_pinctrl_exit(void) } module_exit(spear320_pinctrl_exit); -MODULE_AUTHOR("Viresh Kumar "); +MODULE_AUTHOR("Viresh Kumar "); MODULE_DESCRIPTION("ST Microelectronics SPEAr320 pinctrl driver"); MODULE_LICENSE("GPL v2"); MODULE_DEVICE_TABLE(of, spear320_pinctrl_of_match); diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.c b/drivers/pinctrl/spear/pinctrl-spear3xx.c index 91c883bc46a6..0242378f7cb8 100644 --- a/drivers/pinctrl/spear/pinctrl-spear3xx.c +++ b/drivers/pinctrl/spear/pinctrl-spear3xx.c @@ -2,7 +2,7 @@ * Driver for the ST Microelectronics SPEAr3xx pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.h b/drivers/pinctrl/spear/pinctrl-spear3xx.h index 5d5fdd8df7b8..31f44347f17c 100644 --- a/drivers/pinctrl/spear/pinctrl-spear3xx.h +++ b/drivers/pinctrl/spear/pinctrl-spear3xx.h @@ -2,7 +2,7 @@ * Header file for the ST Microelectronics SPEAr3xx pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 2fd9d36acd15..39abb150bdd4 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -660,7 +660,7 @@ static int acerhdf_register_thermal(void) if (IS_ERR(cl_dev)) return -EINVAL; - thz_dev = thermal_zone_device_register("acerhdf", 1, NULL, + thz_dev = thermal_zone_device_register("acerhdf", 1, 0, NULL, &acerhdf_dev_ops, 0, 0, 0, (kernelmode) ? interval*1000 : 0); if (IS_ERR(thz_dev)) diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 4f20f8dd3d7c..17f6dfd8dbfb 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -694,10 +694,10 @@ MODULE_DEVICE_TABLE(acpi, ideapad_device_ids); static int __devinit ideapad_acpi_add(struct acpi_device *adevice) { int ret, i; - unsigned long cfg; + int cfg; struct ideapad_private *priv; - if (read_method_int(adevice->handle, "_CFG", (int *)&cfg)) + if (read_method_int(adevice->handle, "_CFG", &cfg)) return -ENODEV; priv = kzalloc(sizeof(*priv), GFP_KERNEL); @@ -721,7 +721,7 @@ static int __devinit ideapad_acpi_add(struct acpi_device *adevice) goto input_failed; for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) { - if (test_bit(ideapad_rfk_data[i].cfgbit, &cfg)) + if (test_bit(ideapad_rfk_data[i].cfgbit, &priv->cfg)) ideapad_register_rfkill(adevice, i); else priv->rfk[i] = NULL; diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c index 0ffdb3cde2bb..9af4257d4901 100644 --- a/drivers/platform/x86/intel_ips.c +++ b/drivers/platform/x86/intel_ips.c @@ -72,6 +72,7 @@ #include #include #include +#include #include #include #include @@ -1485,6 +1486,24 @@ static DEFINE_PCI_DEVICE_TABLE(ips_id_table) = { MODULE_DEVICE_TABLE(pci, ips_id_table); +static int ips_blacklist_callback(const struct dmi_system_id *id) +{ + pr_info("Blacklisted intel_ips for %s\n", id->ident); + return 1; +} + +static const struct dmi_system_id ips_blacklist[] = { + { + .callback = ips_blacklist_callback, + .ident = "HP ProBook", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP ProBook"), + }, + }, + { } /* terminating entry */ +}; + static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id) { u64 platform_info; @@ -1494,6 +1513,9 @@ static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id) u16 htshi, trc, trc_required_mask; u8 tse; + if (dmi_check_system(ips_blacklist)) + return -ENODEV; + ips = kzalloc(sizeof(struct ips_driver), GFP_KERNEL); if (!ips) return -ENOMEM; diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c index 5ae9cd9c7e6e..2b2c212ad37d 100644 --- a/drivers/platform/x86/intel_mid_thermal.c +++ b/drivers/platform/x86/intel_mid_thermal.c @@ -499,7 +499,7 @@ static int mid_thermal_probe(struct platform_device *pdev) goto err; } pinfo->tzd[i] = thermal_zone_device_register(name[i], - 0, td_info, &tzd_ops, 0, 0, 0, 0); + 0, 0, td_info, &tzd_ops, 0, 0, 0, 0); if (IS_ERR(pinfo->tzd[i])) { kfree(td_info); ret = PTR_ERR(pinfo->tzd[i]); diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 210d4ae547c2..d456ff0c73b7 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -973,7 +973,7 @@ static ssize_t sony_nc_sysfs_store(struct device *dev, struct device_attribute *attr, const char *buffer, size_t count) { - unsigned long value = 0; + int value; int ret = 0; struct sony_nc_value *item = container_of(attr, struct sony_nc_value, devattr); @@ -984,7 +984,7 @@ static ssize_t sony_nc_sysfs_store(struct device *dev, if (count > 31) return -EINVAL; - if (kstrtoul(buffer, 10, &value)) + if (kstrtoint(buffer, 10, &value)) return -EINVAL; if (item->validate) @@ -994,7 +994,7 @@ static ssize_t sony_nc_sysfs_store(struct device *dev, return value; ret = sony_nc_int_call(sony_nc_acpi_handle, *item->acpiset, - (int *)&value, NULL); + &value, NULL); if (ret < 0) return -EIO; @@ -1010,6 +1010,7 @@ static ssize_t sony_nc_sysfs_store(struct device *dev, struct sony_backlight_props { struct backlight_device *dev; int handle; + int cmd_base; u8 offset; u8 maxlvl; }; @@ -1037,7 +1038,7 @@ static int sony_nc_get_brightness_ng(struct backlight_device *bd) struct sony_backlight_props *sdev = (struct sony_backlight_props *)bl_get_data(bd); - sony_call_snc_handle(sdev->handle, 0x0200, &result); + sony_call_snc_handle(sdev->handle, sdev->cmd_base + 0x100, &result); return (result & 0xff) - sdev->offset; } @@ -1049,7 +1050,8 @@ static int sony_nc_update_status_ng(struct backlight_device *bd) (struct sony_backlight_props *)bl_get_data(bd); value = bd->props.brightness + sdev->offset; - if (sony_call_snc_handle(sdev->handle, 0x0100 | (value << 16), &result)) + if (sony_call_snc_handle(sdev->handle, sdev->cmd_base | (value << 0x10), + &result)) return -EIO; return value; @@ -1172,6 +1174,11 @@ static int sony_nc_hotkeys_decode(u32 event, unsigned int handle) /* * ACPI callbacks */ +enum event_types { + HOTKEY = 1, + KILLSWITCH, + GFX_SWITCH +}; static void sony_nc_notify(struct acpi_device *device, u32 event) { u32 real_ev = event; @@ -1196,7 +1203,7 @@ static void sony_nc_notify(struct acpi_device *device, u32 event) /* hotkey event */ case 0x0100: case 0x0127: - ev_type = 1; + ev_type = HOTKEY; real_ev = sony_nc_hotkeys_decode(event, handle); if (real_ev > 0) @@ -1216,7 +1223,7 @@ static void sony_nc_notify(struct acpi_device *device, u32 event) * update the rfkill device status when the * switch is moved. */ - ev_type = 2; + ev_type = KILLSWITCH; sony_call_snc_handle(handle, 0x0100, &result); real_ev = result & 0x03; @@ -1226,6 +1233,24 @@ static void sony_nc_notify(struct acpi_device *device, u32 event) break; + case 0x0128: + case 0x0146: + /* Hybrid GFX switching */ + sony_call_snc_handle(handle, 0x0000, &result); + dprintk("GFX switch event received (reason: %s)\n", + (result & 0x01) ? + "switch change" : "unknown"); + + /* verify the switch state + * 1: discrete GFX + * 0: integrated GFX + */ + sony_call_snc_handle(handle, 0x0100, &result); + + ev_type = GFX_SWITCH; + real_ev = result & 0xff; + break; + default: dprintk("Unknown event 0x%x for handle 0x%x\n", event, handle); @@ -1238,7 +1263,7 @@ static void sony_nc_notify(struct acpi_device *device, u32 event) } else { /* old style event */ - ev_type = 1; + ev_type = HOTKEY; sony_laptop_report_input_event(real_ev); } @@ -1893,32 +1918,33 @@ static ssize_t sony_nc_battery_care_limit_store(struct device *dev, * bits 4,5: store the limit into the EC * bits 6,7: store the limit into the battery */ + cmd = 0; - /* - * handle 0x0115 should allow storing on battery too; - * handle 0x0136 same as 0x0115 + health status; - * handle 0x013f, same as 0x0136 but no storing on the battery - * - * Store only inside the EC for now, regardless the handle number - */ - if (value == 0) - /* disable limits */ - cmd = 0x0; + if (value > 0) { + if (value <= 50) + cmd = 0x20; - else if (value <= 50) - cmd = 0x21; + else if (value <= 80) + cmd = 0x10; - else if (value <= 80) - cmd = 0x11; + else if (value <= 100) + cmd = 0x30; - else if (value <= 100) - cmd = 0x31; + else + return -EINVAL; - else - return -EINVAL; + /* + * handle 0x0115 should allow storing on battery too; + * handle 0x0136 same as 0x0115 + health status; + * handle 0x013f, same as 0x0136 but no storing on the battery + */ + if (bcare_ctl->handle != 0x013f) + cmd = cmd | (cmd << 2); - if (sony_call_snc_handle(bcare_ctl->handle, (cmd << 0x10) | 0x0100, - &result)) + cmd = (cmd | 0x1) << 0x10; + } + + if (sony_call_snc_handle(bcare_ctl->handle, cmd | 0x0100, &result)) return -EIO; return count; @@ -2113,7 +2139,7 @@ static ssize_t sony_nc_thermal_mode_show(struct device *dev, struct device_attribute *attr, char *buffer) { ssize_t count = 0; - unsigned int mode = sony_nc_thermal_mode_get(); + int mode = sony_nc_thermal_mode_get(); if (mode < 0) return mode; @@ -2472,6 +2498,7 @@ static void sony_nc_backlight_ng_read_limits(int handle, { u64 offset; int i; + int lvl_table_len = 0; u8 min = 0xff, max = 0x00; unsigned char buffer[32] = { 0 }; @@ -2480,8 +2507,6 @@ static void sony_nc_backlight_ng_read_limits(int handle, props->maxlvl = 0xff; offset = sony_find_snc_handle(handle); - if (offset < 0) - return; /* try to read the boundaries from ACPI tables, if we fail the above * defaults should be reasonable @@ -2491,11 +2516,21 @@ static void sony_nc_backlight_ng_read_limits(int handle, if (i < 0) return; + switch (handle) { + case 0x012f: + case 0x0137: + lvl_table_len = 9; + break; + case 0x143: + lvl_table_len = 16; + break; + } + /* the buffer lists brightness levels available, brightness levels are * from position 0 to 8 in the array, other values are used by ALS * control. */ - for (i = 0; i < 9 && i < ARRAY_SIZE(buffer); i++) { + for (i = 0; i < lvl_table_len && i < ARRAY_SIZE(buffer); i++) { dprintk("Brightness level: %d\n", buffer[i]); @@ -2520,16 +2555,24 @@ static void sony_nc_backlight_setup(void) const struct backlight_ops *ops = NULL; struct backlight_properties props; - if (sony_find_snc_handle(0x12f) != -1) { + if (sony_find_snc_handle(0x12f) >= 0) { ops = &sony_backlight_ng_ops; + sony_bl_props.cmd_base = 0x0100; sony_nc_backlight_ng_read_limits(0x12f, &sony_bl_props); max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset; - } else if (sony_find_snc_handle(0x137) != -1) { + } else if (sony_find_snc_handle(0x137) >= 0) { ops = &sony_backlight_ng_ops; + sony_bl_props.cmd_base = 0x0100; sony_nc_backlight_ng_read_limits(0x137, &sony_bl_props); max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset; + } else if (sony_find_snc_handle(0x143) >= 0) { + ops = &sony_backlight_ng_ops; + sony_bl_props.cmd_base = 0x3000; + sony_nc_backlight_ng_read_limits(0x143, &sony_bl_props); + max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset; + } else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", &unused))) { ops = &sony_backlight_ops; @@ -2597,6 +2640,12 @@ static int sony_nc_add(struct acpi_device *device) } } + result = sony_laptop_setup_input(device); + if (result) { + pr_err("Unable to create input devices\n"); + goto outplatform; + } + if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "ECON", &handle))) { int arg = 1; @@ -2614,12 +2663,6 @@ static int sony_nc_add(struct acpi_device *device) } /* setup input devices and helper fifo */ - result = sony_laptop_setup_input(device); - if (result) { - pr_err("Unable to create input devices\n"); - goto outsnc; - } - if (acpi_video_backlight_support()) { pr_info("brightness ignored, must be controlled by ACPI video driver\n"); } else { @@ -2667,22 +2710,21 @@ static int sony_nc_add(struct acpi_device *device) return 0; - out_sysfs: +out_sysfs: for (item = sony_nc_values; item->name; ++item) { device_remove_file(&sony_pf_device->dev, &item->devattr); } sony_nc_backlight_cleanup(); - - sony_laptop_remove_input(); - - outsnc: sony_nc_function_cleanup(sony_pf_device); sony_nc_handles_cleanup(sony_pf_device); - outpresent: +outplatform: + sony_laptop_remove_input(); + +outpresent: sony_pf_remove(); - outwalk: +outwalk: sony_nc_rfkill_cleanup(); return result; } diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index e1b8c54ace5a..a739f5ca936a 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -794,17 +794,17 @@ static __devinit int ab8500_regulator_register(struct platform_device *pdev, } static struct of_regulator_match ab8500_regulator_matches[] = { - { .name = "LDO-AUX1", .driver_data = (void *) AB8500_LDO_AUX1, }, - { .name = "LDO-AUX2", .driver_data = (void *) AB8500_LDO_AUX2, }, - { .name = "LDO-AUX3", .driver_data = (void *) AB8500_LDO_AUX3, }, - { .name = "LDO-INTCORE", .driver_data = (void *) AB8500_LDO_INTCORE, }, - { .name = "LDO-TVOUT", .driver_data = (void *) AB8500_LDO_TVOUT, }, - { .name = "LDO-USB", .driver_data = (void *) AB8500_LDO_USB, }, - { .name = "LDO-AUDIO", .driver_data = (void *) AB8500_LDO_AUDIO, }, - { .name = "LDO-ANAMIC1", .driver_data = (void *) AB8500_LDO_ANAMIC1, }, - { .name = "LDO-ANAMIC2", .driver_data = (void *) AB8500_LDO_ANAMIC2, }, - { .name = "LDO-DMIC", .driver_data = (void *) AB8500_LDO_DMIC, }, - { .name = "LDO-ANA", .driver_data = (void *) AB8500_LDO_ANA, }, + { .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8500_LDO_AUX1, }, + { .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8500_LDO_AUX2, }, + { .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8500_LDO_AUX3, }, + { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, }, + { .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8500_LDO_TVOUT, }, + { .name = "ab8500_ldo_usb", .driver_data = (void *) AB8500_LDO_USB, }, + { .name = "ab8500_ldo_audio", .driver_data = (void *) AB8500_LDO_AUDIO, }, + { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, }, + { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, }, + { .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8500_LDO_DMIC, }, + { .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, }, }; static __devinit int diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 3660bace123c..e82e7eaac0f1 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -224,7 +224,7 @@ static struct platform_driver anatop_regulator_driver = { .of_match_table = of_anatop_regulator_match_tbl, }, .probe = anatop_regulator_probe, - .remove = anatop_regulator_remove, + .remove = __devexit_p(anatop_regulator_remove), }; static int __init anatop_regulator_init(void) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 7584a74eec8a..8b4b3829d9e7 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2050,6 +2050,9 @@ int regulator_map_voltage_linear(struct regulator_dev *rdev, return -EINVAL; } + if (min_uV < rdev->desc->min_uV) + min_uV = rdev->desc->min_uV; + ret = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step); if (ret < 0) return ret; @@ -2516,9 +2519,12 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) { struct regulator_dev *rdev = regulator->rdev; struct regulator *consumer; - int ret, output_uV, input_uV, total_uA_load = 0; + int ret, output_uV, input_uV = 0, total_uA_load = 0; unsigned int mode; + if (rdev->supply) + input_uV = regulator_get_voltage(rdev->supply); + mutex_lock(&rdev->mutex); /* @@ -2551,10 +2557,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) goto out; } - /* get input voltage */ - input_uV = 0; - if (rdev->supply) - input_uV = regulator_get_voltage(rdev->supply); + /* No supply? Use constraint voltage */ if (input_uV <= 0) input_uV = rdev->constraints->input_uV; if (input_uV <= 0) { diff --git a/drivers/regulator/db8500-prcmu.c b/drivers/regulator/db8500-prcmu.c index 968f97f3cb3d..9dbb491b6efa 100644 --- a/drivers/regulator/db8500-prcmu.c +++ b/drivers/regulator/db8500-prcmu.c @@ -452,26 +452,26 @@ static __devinit int db8500_regulator_register(struct platform_device *pdev, } static struct of_regulator_match db8500_regulator_matches[] = { - { .name = "db8500-vape", .driver_data = (void *) DB8500_REGULATOR_VAPE, }, - { .name = "db8500-varm", .driver_data = (void *) DB8500_REGULATOR_VARM, }, - { .name = "db8500-vmodem", .driver_data = (void *) DB8500_REGULATOR_VMODEM, }, - { .name = "db8500-vpll", .driver_data = (void *) DB8500_REGULATOR_VPLL, }, - { .name = "db8500-vsmps1", .driver_data = (void *) DB8500_REGULATOR_VSMPS1, }, - { .name = "db8500-vsmps2", .driver_data = (void *) DB8500_REGULATOR_VSMPS2, }, - { .name = "db8500-vsmps3", .driver_data = (void *) DB8500_REGULATOR_VSMPS3, }, - { .name = "db8500-vrf1", .driver_data = (void *) DB8500_REGULATOR_VRF1, }, - { .name = "db8500-sva-mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSP, }, - { .name = "db8500-sva-mmdsp-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSPRET, }, - { .name = "db8500-sva-pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAPIPE, }, - { .name = "db8500-sia-mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSP, }, - { .name = "db8500-sia-mmdsp-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSPRET, }, - { .name = "db8500-sia-pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAPIPE, }, - { .name = "db8500-sga", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SGA, }, - { .name = "db8500-b2r2-mcde", .driver_data = (void *) DB8500_REGULATOR_SWITCH_B2R2_MCDE, }, - { .name = "db8500-esram12", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12, }, - { .name = "db8500-esram12-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12RET, }, - { .name = "db8500-esram34", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34, }, - { .name = "db8500-esram34-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34RET, }, + { .name = "db8500_vape", .driver_data = (void *) DB8500_REGULATOR_VAPE, }, + { .name = "db8500_varm", .driver_data = (void *) DB8500_REGULATOR_VARM, }, + { .name = "db8500_vmodem", .driver_data = (void *) DB8500_REGULATOR_VMODEM, }, + { .name = "db8500_vpll", .driver_data = (void *) DB8500_REGULATOR_VPLL, }, + { .name = "db8500_vsmps1", .driver_data = (void *) DB8500_REGULATOR_VSMPS1, }, + { .name = "db8500_vsmps2", .driver_data = (void *) DB8500_REGULATOR_VSMPS2, }, + { .name = "db8500_vsmps3", .driver_data = (void *) DB8500_REGULATOR_VSMPS3, }, + { .name = "db8500_vrf1", .driver_data = (void *) DB8500_REGULATOR_VRF1, }, + { .name = "db8500_sva_mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSP, }, + { .name = "db8500_sva_mmdsp_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSPRET, }, + { .name = "db8500_sva_pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAPIPE, }, + { .name = "db8500_sia_mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSP, }, + { .name = "db8500_sia_mmdsp_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSPRET, }, + { .name = "db8500_sia_pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAPIPE, }, + { .name = "db8500_sga", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SGA, }, + { .name = "db8500_b2r2_mcde", .driver_data = (void *) DB8500_REGULATOR_SWITCH_B2R2_MCDE, }, + { .name = "db8500_esram12", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12, }, + { .name = "db8500_esram12_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12RET, }, + { .name = "db8500_esram34", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34, }, + { .name = "db8500_esram34_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34RET, }, }; static __devinit int diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c index 9997d7aaca84..242851a4c1a6 100644 --- a/drivers/regulator/gpio-regulator.c +++ b/drivers/regulator/gpio-regulator.c @@ -101,16 +101,20 @@ static int gpio_regulator_get_value(struct regulator_dev *dev) } static int gpio_regulator_set_value(struct regulator_dev *dev, - int min, int max) + int min, int max, unsigned *selector) { struct gpio_regulator_data *data = rdev_get_drvdata(dev); - int ptr, target, state, best_val = INT_MAX; + int ptr, target = 0, state, best_val = INT_MAX; for (ptr = 0; ptr < data->nr_states; ptr++) if (data->states[ptr].value < best_val && data->states[ptr].value >= min && - data->states[ptr].value <= max) + data->states[ptr].value <= max) { target = data->states[ptr].gpios; + best_val = data->states[ptr].value; + if (selector) + *selector = ptr; + } if (best_val == INT_MAX) return -EINVAL; @@ -128,7 +132,7 @@ static int gpio_regulator_set_voltage(struct regulator_dev *dev, int min_uV, int max_uV, unsigned *selector) { - return gpio_regulator_set_value(dev, min_uV, max_uV); + return gpio_regulator_set_value(dev, min_uV, max_uV, selector); } static int gpio_regulator_list_voltage(struct regulator_dev *dev, @@ -145,7 +149,7 @@ static int gpio_regulator_list_voltage(struct regulator_dev *dev, static int gpio_regulator_set_current_limit(struct regulator_dev *dev, int min_uA, int max_uA) { - return gpio_regulator_set_value(dev, min_uA, max_uA); + return gpio_regulator_set_value(dev, min_uA, max_uA, NULL); } static struct regulator_ops gpio_regulator_voltage_ops = { @@ -286,7 +290,7 @@ static int __devinit gpio_regulator_probe(struct platform_device *pdev) cfg.dev = &pdev->dev; cfg.init_data = config->init_data; - cfg.driver_data = &drvdata; + cfg.driver_data = drvdata; drvdata->dev = regulator_register(&drvdata->desc, &cfg); if (IS_ERR(drvdata->dev)) { diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c index 1f4bb80457b3..9d540cd02dab 100644 --- a/drivers/regulator/max8649.c +++ b/drivers/regulator/max8649.c @@ -259,6 +259,7 @@ static int __devinit max8649_regulator_probe(struct i2c_client *client, config.dev = &client->dev; config.init_data = pdata->regulator; config.driver_data = info; + config.regmap = info->regmap; info->regulator = regulator_register(&dcdc_desc, &config); if (IS_ERR(info->regulator)) { diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index c4435f608df7..795f75a6ac33 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -673,7 +673,9 @@ static __devinit int palmas_probe(struct platform_device *pdev) pmic->desc[id].ops = &palmas_ops_smps10; pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL; pmic->desc[id].vsel_mask = SMPS10_VSEL; - pmic->desc[id].enable_reg = PALMAS_SMPS10_STATUS; + pmic->desc[id].enable_reg = + PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, + PALMAS_SMPS10_STATUS); pmic->desc[id].enable_mask = SMPS10_BOOST_EN; } @@ -739,7 +741,8 @@ static __devinit int palmas_probe(struct platform_device *pdev) pmic->desc[id].type = REGULATOR_VOLTAGE; pmic->desc[id].owner = THIS_MODULE; - pmic->desc[id].enable_reg = palmas_regs_info[id].ctrl_addr; + pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, + palmas_regs_info[id].ctrl_addr); pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE; if (pdata && pdata->reg_data) @@ -775,9 +778,6 @@ static __devinit int palmas_probe(struct platform_device *pdev) err_unregister_regulator: while (--id >= 0) regulator_unregister(pmic->rdev[id]); - kfree(pmic->rdev); - kfree(pmic->desc); - kfree(pmic); return ret; } @@ -788,10 +788,6 @@ static int __devexit palmas_remove(struct platform_device *pdev) for (id = 0; id < PALMAS_NUM_REGS; id++) regulator_unregister(pmic->rdev[id]); - - kfree(pmic->rdev); - kfree(pmic->desc); - kfree(pmic); return 0; } diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index 290d6fc01029..9caadb482178 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -451,7 +451,7 @@ static int s5m8767_set_voltage_time_sel(struct regulator_dev *rdev, desc = reg_voltage_map[reg_id]; - if (old_sel < new_sel) + if ((old_sel < new_sel) && s5m8767->ramp_delay) return DIV_ROUND_UP(desc->step * (new_sel - old_sel), s5m8767->ramp_delay * 1000); return 0; diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c index f841bd0db6aa..8f1be8586c72 100644 --- a/drivers/regulator/tps65023-regulator.c +++ b/drivers/regulator/tps65023-regulator.c @@ -71,7 +71,7 @@ /* LDO_CTRL bitfields */ #define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id) ((ldo_id)*4) -#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0x0F << ((ldo_id)*4)) +#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0x07 << ((ldo_id)*4)) /* Number of step-down converters available */ #define TPS65023_NUM_DCDC 3 diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c index b88b3df82381..1b299aacf22f 100644 --- a/drivers/regulator/tps6524x-regulator.c +++ b/drivers/regulator/tps6524x-regulator.c @@ -482,7 +482,7 @@ static int get_voltage_sel(struct regulator_dev *rdev) info = &supply_info[rdev_get_id(rdev)]; if (info->flags & FIXED_VOLTAGE) - return info->fixed_voltage; + return 0; ret = read_field(hw, &info->voltage); if (ret < 0) diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index 24d880e78ec6..f8d818abf98c 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -4,9 +4,11 @@ menu "Remoteproc drivers (EXPERIMENTAL)" config REMOTEPROC tristate depends on EXPERIMENTAL + select FW_CONFIG config OMAP_REMOTEPROC tristate "OMAP remoteproc support" + depends on EXPERIMENTAL depends on ARCH_OMAP4 depends on OMAP_IOMMU select REMOTEPROC diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c index 69425c4e86f3..de138e30d3e6 100644 --- a/drivers/remoteproc/omap_remoteproc.c +++ b/drivers/remoteproc/omap_remoteproc.c @@ -182,7 +182,7 @@ static int __devinit omap_rproc_probe(struct platform_device *pdev) ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (ret) { - dev_err(pdev->dev.parent, "dma_set_coherent_mask: %d\n", ret); + dev_err(&pdev->dev, "dma_set_coherent_mask: %d\n", ret); return ret; } diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 8ea7bccc7100..66324ee4678f 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -247,7 +247,7 @@ rproc_load_segments(struct rproc *rproc, const u8 *elf_data, size_t len) } if (offset + filesz > len) { - dev_err(dev, "truncated fw: need 0x%x avail 0x%x\n", + dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n", offset + filesz, len); ret = -EINVAL; break; @@ -934,7 +934,7 @@ static void rproc_resource_cleanup(struct rproc *rproc) unmapped = iommu_unmap(rproc->domain, entry->da, entry->len); if (unmapped != entry->len) { /* nothing much to do besides complaining */ - dev_err(dev, "failed to unmap %u/%u\n", entry->len, + dev_err(dev, "failed to unmap %u/%zu\n", entry->len, unmapped); } @@ -1020,7 +1020,7 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw) ehdr = (struct elf32_hdr *)fw->data; - dev_info(dev, "Booting fw image %s, size %d\n", name, fw->size); + dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size); /* * if enabling an IOMMU isn't relevant for this rproc, this is @@ -1041,8 +1041,10 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw) /* look for the resource table */ table = rproc_find_rsc_table(rproc, fw->data, fw->size, &tablesz); - if (!table) + if (!table) { + ret = -EINVAL; goto clean_up; + } /* handle fw resources which are required to boot rproc */ ret = rproc_handle_boot_rsc(rproc, table, tablesz); diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c index 75506ec2840e..f56c8ba3a861 100644 --- a/drivers/rpmsg/virtio_rpmsg_bus.c +++ b/drivers/rpmsg/virtio_rpmsg_bus.c @@ -188,6 +188,26 @@ static int rpmsg_uevent(struct device *dev, struct kobj_uevent_env *env) rpdev->id.name); } +/** + * __ept_release() - deallocate an rpmsg endpoint + * @kref: the ept's reference count + * + * This function deallocates an ept, and is invoked when its @kref refcount + * drops to zero. + * + * Never invoke this function directly! + */ +static void __ept_release(struct kref *kref) +{ + struct rpmsg_endpoint *ept = container_of(kref, struct rpmsg_endpoint, + refcount); + /* + * At this point no one holds a reference to ept anymore, + * so we can directly free it + */ + kfree(ept); +} + /* for more info, see below documentation of rpmsg_create_ept() */ static struct rpmsg_endpoint *__rpmsg_create_ept(struct virtproc_info *vrp, struct rpmsg_channel *rpdev, rpmsg_rx_cb_t cb, @@ -206,6 +226,9 @@ static struct rpmsg_endpoint *__rpmsg_create_ept(struct virtproc_info *vrp, return NULL; } + kref_init(&ept->refcount); + mutex_init(&ept->cb_lock); + ept->rpdev = rpdev; ept->cb = cb; ept->priv = priv; @@ -238,7 +261,7 @@ rem_idr: idr_remove(&vrp->endpoints, request); free_ept: mutex_unlock(&vrp->endpoints_lock); - kfree(ept); + kref_put(&ept->refcount, __ept_release); return NULL; } @@ -302,11 +325,17 @@ EXPORT_SYMBOL(rpmsg_create_ept); static void __rpmsg_destroy_ept(struct virtproc_info *vrp, struct rpmsg_endpoint *ept) { + /* make sure new inbound messages can't find this ept anymore */ mutex_lock(&vrp->endpoints_lock); idr_remove(&vrp->endpoints, ept->addr); mutex_unlock(&vrp->endpoints_lock); - kfree(ept); + /* make sure in-flight inbound messages won't invoke cb anymore */ + mutex_lock(&ept->cb_lock); + ept->cb = NULL; + mutex_unlock(&ept->cb_lock); + + kref_put(&ept->refcount, __ept_release); } /** @@ -790,12 +819,28 @@ static void rpmsg_recv_done(struct virtqueue *rvq) /* use the dst addr to fetch the callback of the appropriate user */ mutex_lock(&vrp->endpoints_lock); + ept = idr_find(&vrp->endpoints, msg->dst); + + /* let's make sure no one deallocates ept while we use it */ + if (ept) + kref_get(&ept->refcount); + mutex_unlock(&vrp->endpoints_lock); - if (ept && ept->cb) - ept->cb(ept->rpdev, msg->data, msg->len, ept->priv, msg->src); - else + if (ept) { + /* make sure ept->cb doesn't go away while we use it */ + mutex_lock(&ept->cb_lock); + + if (ept->cb) + ept->cb(ept->rpdev, msg->data, msg->len, ept->priv, + msg->src); + + mutex_unlock(&ept->cb_lock); + + /* farewell, ept, we don't need you anymore */ + kref_put(&ept->refcount, __ept_release); + } else dev_warn(dev, "msg received with no recepient\n"); /* publish the real size of the buffer */ @@ -1040,7 +1085,7 @@ static int __init rpmsg_init(void) return ret; } -module_init(rpmsg_init); +subsys_initcall(rpmsg_init); static void __exit rpmsg_fini(void) { diff --git a/drivers/rtc/rtc-ab8500.c b/drivers/rtc/rtc-ab8500.c index 4bcf9ca2818a..370889d0489b 100644 --- a/drivers/rtc/rtc-ab8500.c +++ b/drivers/rtc/rtc-ab8500.c @@ -17,6 +17,7 @@ #include #include #include +#include #define AB8500_RTC_SOFF_STAT_REG 0x00 #define AB8500_RTC_CC_CONF_REG 0x01 @@ -422,7 +423,7 @@ static int __devinit ab8500_rtc_probe(struct platform_device *pdev) } err = request_threaded_irq(irq, NULL, rtc_alarm_handler, - IRQF_NO_SUSPEND, "ab8500-rtc", rtc); + IRQF_NO_SUSPEND | IRQF_ONESHOT, "ab8500-rtc", rtc); if (err < 0) { rtc_device_unregister(rtc); return err; @@ -430,7 +431,6 @@ static int __devinit ab8500_rtc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, rtc); - err = ab8500_sysfs_rtc_register(&pdev->dev); if (err) { dev_err(&pdev->dev, "sysfs RTC failed to register\n"); @@ -454,10 +454,16 @@ static int __devexit ab8500_rtc_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id ab8500_rtc_match[] = { + { .compatible = "stericsson,ab8500-rtc", }, + {} +}; + static struct platform_driver ab8500_rtc_driver = { .driver = { .name = "ab8500-rtc", .owner = THIS_MODULE, + .of_match_table = ab8500_rtc_match, }, .probe = ab8500_rtc_probe, .remove = __devexit_p(ab8500_rtc_remove), diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c index 5e1d64ee5228..e3e50d69baf8 100644 --- a/drivers/rtc/rtc-mxc.c +++ b/drivers/rtc/rtc-mxc.c @@ -202,10 +202,11 @@ static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id) struct platform_device *pdev = dev_id; struct rtc_plat_data *pdata = platform_get_drvdata(pdev); void __iomem *ioaddr = pdata->ioaddr; + unsigned long flags; u32 status; u32 events = 0; - spin_lock_irq(&pdata->rtc->irq_lock); + spin_lock_irqsave(&pdata->rtc->irq_lock, flags); status = readw(ioaddr + RTC_RTCISR) & readw(ioaddr + RTC_RTCIENR); /* clear interrupt sources */ writew(status, ioaddr + RTC_RTCISR); @@ -224,7 +225,7 @@ static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id) events |= (RTC_PF | RTC_IRQF); rtc_update_irq(pdata->rtc, 1, events); - spin_unlock_irq(&pdata->rtc->irq_lock); + spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags); return IRQ_HANDLED; } diff --git a/drivers/rtc/rtc-spear.c b/drivers/rtc/rtc-spear.c index 1f76320e545b..e2785479113c 100644 --- a/drivers/rtc/rtc-spear.c +++ b/drivers/rtc/rtc-spear.c @@ -458,12 +458,12 @@ static int __devexit spear_rtc_remove(struct platform_device *pdev) clk_disable(config->clk); clk_put(config->clk); iounmap(config->ioaddr); - kfree(config); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res) release_mem_region(res->start, resource_size(res)); platform_set_drvdata(pdev, NULL); rtc_device_unregister(config->rtc); + kfree(config); return 0; } diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c index 258abeabf624..c5d06fe83bba 100644 --- a/drivers/rtc/rtc-twl.c +++ b/drivers/rtc/rtc-twl.c @@ -510,7 +510,7 @@ static int __devinit twl_rtc_probe(struct platform_device *pdev) } ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt, - IRQF_TRIGGER_RISING, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, dev_name(&rtc->dev), rtc); if (ret < 0) { dev_err(&pdev->dev, "IRQ is not free.\n"); diff --git a/drivers/scsi/aic94xx/aic94xx_task.c b/drivers/scsi/aic94xx/aic94xx_task.c index 532d212b6b2c..393e7ce8e95a 100644 --- a/drivers/scsi/aic94xx/aic94xx_task.c +++ b/drivers/scsi/aic94xx/aic94xx_task.c @@ -201,7 +201,7 @@ static void asd_get_response_tasklet(struct asd_ascb *ascb, if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) { resp->frame_len = le16_to_cpu(*(__le16 *)(r+6)); - memcpy(&resp->ending_fis[0], r+16, 24); + memcpy(&resp->ending_fis[0], r+16, ATA_RESP_FIS_SIZE); ts->buf_valid_size = sizeof(*resp); } } diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h index 0c53c28dc3d3..7e77cf620291 100644 --- a/drivers/scsi/bnx2i/bnx2i.h +++ b/drivers/scsi/bnx2i/bnx2i.h @@ -350,6 +350,7 @@ struct bnx2i_hba { struct pci_dev *pcidev; struct net_device *netdev; void __iomem *regview; + resource_size_t reg_base; u32 age; unsigned long cnic_dev_type; diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index ece47e502282..86a12b48e477 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -2724,7 +2724,6 @@ int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep) goto arm_cq; } - reg_base = ep->hba->netdev->base_addr; if ((test_bit(BNX2I_NX2_DEV_5709, &ep->hba->cnic_dev_type)) && (ep->hba->mail_queue_access == BNX2I_MQ_BIN_MODE)) { config2 = REG_RD(ep->hba, BNX2_MQ_CONFIG2); @@ -2740,7 +2739,7 @@ int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep) /* 5709 device in normal node and 5706/5708 devices */ reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num); - ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off, + ep->qp.ctx_base = ioremap_nocache(ep->hba->reg_base + reg_off, MB_KERNEL_CTX_SIZE); if (!ep->qp.ctx_base) return -ENOMEM; diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c index f8d516b53161..621538b8b544 100644 --- a/drivers/scsi/bnx2i/bnx2i_iscsi.c +++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c @@ -811,13 +811,13 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic) bnx2i_identify_device(hba); bnx2i_setup_host_queue_size(hba, shost); + hba->reg_base = pci_resource_start(hba->pcidev, 0); if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) { - hba->regview = ioremap_nocache(hba->netdev->base_addr, - BNX2_MQ_CONFIG2); + hba->regview = pci_iomap(hba->pcidev, 0, BNX2_MQ_CONFIG2); if (!hba->regview) goto ioreg_map_err; } else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) { - hba->regview = ioremap_nocache(hba->netdev->base_addr, 4096); + hba->regview = pci_iomap(hba->pcidev, 0, 4096); if (!hba->regview) goto ioreg_map_err; } @@ -884,7 +884,7 @@ cid_que_err: bnx2i_free_mp_bdt(hba); mp_bdt_mem_err: if (hba->regview) { - iounmap(hba->regview); + pci_iounmap(hba->pcidev, hba->regview); hba->regview = NULL; } ioreg_map_err: @@ -910,7 +910,7 @@ void bnx2i_free_hba(struct bnx2i_hba *hba) pci_dev_put(hba->pcidev); if (hba->regview) { - iounmap(hba->regview); + pci_iounmap(hba->pcidev, hba->regview); hba->regview = NULL; } bnx2i_free_mp_bdt(hba); diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 441d88ad99a7..d109cc3a17b6 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -139,12 +139,12 @@ static void sas_ata_task_done(struct sas_task *task) if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD || ((stat->stat == SAM_STAT_CHECK_CONDITION && dev->sata_dev.command_set == ATAPI_COMMAND_SET))) { - ata_tf_from_fis(resp->ending_fis, &dev->sata_dev.tf); + memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE); if (!link->sactive) { - qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command); + qc->err_mask |= ac_err_mask(dev->sata_dev.fis[2]); } else { - link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.tf.command); + link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.fis[2]); if (unlikely(link->eh_info.err_mask)) qc->flags |= ATA_QCFLAG_FAILED; } @@ -161,8 +161,8 @@ static void sas_ata_task_done(struct sas_task *task) qc->flags |= ATA_QCFLAG_FAILED; } - dev->sata_dev.tf.feature = 0x04; /* status err */ - dev->sata_dev.tf.command = ATA_ERR; + dev->sata_dev.fis[3] = 0x04; /* status err */ + dev->sata_dev.fis[2] = ATA_ERR; } } @@ -269,7 +269,7 @@ static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc) { struct domain_device *dev = qc->ap->private_data; - memcpy(&qc->result_tf, &dev->sata_dev.tf, sizeof(qc->result_tf)); + ata_tf_from_fis(dev->sata_dev.fis, &qc->result_tf); return true; } diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 6102ef2cb2d8..9d46fcbe7755 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -1792,7 +1792,7 @@ static inline void _base_writeq(__u64 b, volatile void __iomem *addr, static inline u8 _base_get_msix_index(struct MPT2SAS_ADAPTER *ioc) { - return ioc->cpu_msix_table[smp_processor_id()]; + return ioc->cpu_msix_table[raw_smp_processor_id()]; } /** diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 04f80ebf09eb..77759c78cc21 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include @@ -2477,11 +2476,9 @@ static void qlt_do_ctio_completion(struct scsi_qla_host *vha, uint32_t handle, } cmd = qlt_ctio_to_cmd(vha, handle, ctio); - if (cmd == NULL) { - if (status != CTIO_SUCCESS) - qlt_term_ctio_exchange(vha, ctio, NULL, status); + if (cmd == NULL) return; - } + se_cmd = &cmd->se_cmd; tfo = se_cmd->se_tfo; @@ -2727,10 +2724,12 @@ static void qlt_do_work(struct work_struct *work) out_term: ql_dbg(ql_dbg_tgt_mgt, vha, 0xf020, "Terminating work cmd %p", cmd); /* - * cmd has not sent to target yet, so pass NULL as the second argument + * cmd has not sent to target yet, so pass NULL as the second + * argument to qlt_send_term_exchange() and free the memory here. */ spin_lock_irqsave(&ha->hardware_lock, flags); qlt_send_term_exchange(vha, NULL, &cmd->atio, 1); + kmem_cache_free(qla_tgt_cmd_cachep, cmd); spin_unlock_irqrestore(&ha->hardware_lock, flags); if (sess) ha->tgt.tgt_ops->put_sess(sess); @@ -3961,7 +3960,7 @@ void qlt_async_event(uint16_t code, struct scsi_qla_host *vha, { struct qla_hw_data *ha = vha->hw; struct qla_tgt *tgt = ha->tgt.qla_tgt; - int reason_code; + int login_code; ql_dbg(ql_dbg_tgt, vha, 0xe039, "scsi(%ld): ha state %d init_done %d oper_mode %d topo %d\n", @@ -4004,9 +4003,9 @@ void qlt_async_event(uint16_t code, struct scsi_qla_host *vha, { ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03b, "qla_target(%d): Async LOOP_UP occured " - "(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx, - le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]), - le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4])); + "(m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx, + le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]), + le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3])); if (tgt->link_reinit_iocb_pending) { qlt_send_notify_ack(vha, (void *)&tgt->link_reinit_iocb, 0, 0, 0, 0, 0, 0); @@ -4021,23 +4020,24 @@ void qlt_async_event(uint16_t code, struct scsi_qla_host *vha, case MBA_RSCN_UPDATE: ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03c, "qla_target(%d): Async event %#x occured " - "(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx, code, - le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]), - le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4])); + "(m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx, code, + le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]), + le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3])); break; case MBA_PORT_UPDATE: ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03d, "qla_target(%d): Port update async event %#x " - "occured: updating the ports database (m[1]=%x, m[2]=%x, " - "m[3]=%x, m[4]=%x)", vha->vp_idx, code, - le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]), - le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4])); - reason_code = le16_to_cpu(mailbox[2]); - if (reason_code == 0x4) + "occured: updating the ports database (m[0]=%x, m[1]=%x, " + "m[2]=%x, m[3]=%x)", vha->vp_idx, code, + le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]), + le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3])); + + login_code = le16_to_cpu(mailbox[2]); + if (login_code == 0x4) ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03e, "Async MB 2: Got PLOGI Complete\n"); - else if (reason_code == 0x7) + else if (login_code == 0x7) ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03f, "Async MB 2: Port Logged Out\n"); break; @@ -4045,9 +4045,9 @@ void qlt_async_event(uint16_t code, struct scsi_qla_host *vha, default: ql_dbg(ql_dbg_tgt_mgt, vha, 0xf040, "qla_target(%d): Async event %#x occured: " - "ignore (m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx, - code, le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]), - le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4])); + "ignore (m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx, + code, le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]), + le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3])); break; } diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h index 9ec19bc2f0fe..9f9ef1644fd9 100644 --- a/drivers/scsi/qla2xxx/qla_target.h +++ b/drivers/scsi/qla2xxx/qla_target.h @@ -919,7 +919,6 @@ struct qla_tgt_srr_ctio { #define QLA_TGT_XMIT_STATUS 2 #define QLA_TGT_XMIT_ALL (QLA_TGT_XMIT_STATUS|QLA_TGT_XMIT_DATA) -#include extern struct qla_tgt_data qla_target; /* diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index 436598f57404..6e64314dbbb3 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -137,13 +137,15 @@ static char *tcm_qla2xxx_get_fabric_name(void) */ static int tcm_qla2xxx_npiv_extract_wwn(const char *ns, u64 *nm) { - unsigned int i, j, value; + unsigned int i, j; u8 wwn[8]; memset(wwn, 0, sizeof(wwn)); /* Validate and store the new name */ for (i = 0, j = 0; i < 16; i++) { + int value; + value = hex_to_bin(*ns++); if (value >= 0) j = (j << 4) | value; @@ -652,8 +654,8 @@ static int tcm_qla2xxx_handle_data(struct qla_tgt_cmd *cmd) /* * Called from qla_target.c:qlt_issue_task_mgmt() */ -int tcm_qla2xxx_handle_tmr(struct qla_tgt_mgmt_cmd *mcmd, uint32_t lun, - uint8_t tmr_func, uint32_t tag) +static int tcm_qla2xxx_handle_tmr(struct qla_tgt_mgmt_cmd *mcmd, uint32_t lun, + uint8_t tmr_func, uint32_t tag) { struct qla_tgt_sess *sess = mcmd->sess; struct se_cmd *se_cmd = &mcmd->se_cmd; @@ -762,65 +764,8 @@ static u16 tcm_qla2xxx_set_fabric_sense_len(struct se_cmd *se_cmd, struct target_fabric_configfs *tcm_qla2xxx_fabric_configfs; struct target_fabric_configfs *tcm_qla2xxx_npiv_fabric_configfs; -static int tcm_qla2xxx_setup_nacl_from_rport( - struct se_portal_group *se_tpg, - struct se_node_acl *se_nacl, - struct tcm_qla2xxx_lport *lport, - struct tcm_qla2xxx_nacl *nacl, - u64 rport_wwnn) -{ - struct scsi_qla_host *vha = lport->qla_vha; - struct Scsi_Host *sh = vha->host; - struct fc_host_attrs *fc_host = shost_to_fc_host(sh); - struct fc_rport *rport; - unsigned long flags; - void *node; - int rc; - - /* - * Scan the existing rports, and create a session for the - * explict NodeACL is an matching rport->node_name already - * exists. - */ - spin_lock_irqsave(sh->host_lock, flags); - list_for_each_entry(rport, &fc_host->rports, peers) { - if (rport_wwnn != rport->node_name) - continue; - - pr_debug("Located existing rport_wwpn and rport->node_name: 0x%016LX, port_id: 0x%04x\n", - rport->node_name, rport->port_id); - nacl->nport_id = rport->port_id; - - spin_unlock_irqrestore(sh->host_lock, flags); - - spin_lock_irqsave(&vha->hw->hardware_lock, flags); - node = btree_lookup32(&lport->lport_fcport_map, rport->port_id); - if (node) { - rc = btree_update32(&lport->lport_fcport_map, - rport->port_id, se_nacl); - } else { - rc = btree_insert32(&lport->lport_fcport_map, - rport->port_id, se_nacl, - GFP_ATOMIC); - } - spin_unlock_irqrestore(&vha->hw->hardware_lock, flags); - - if (rc) { - pr_err("Unable to insert se_nacl into fcport_map"); - WARN_ON(rc > 0); - return rc; - } - - pr_debug("Inserted into fcport_map: %p for WWNN: 0x%016LX, port_id: 0x%08x\n", - se_nacl, rport_wwnn, nacl->nport_id); - - return 1; - } - spin_unlock_irqrestore(sh->host_lock, flags); - - return 0; -} - +static void tcm_qla2xxx_clear_sess_lookup(struct tcm_qla2xxx_lport *, + struct tcm_qla2xxx_nacl *, struct qla_tgt_sess *); /* * Expected to be called with struct qla_hw_data->hardware_lock held */ @@ -842,11 +787,40 @@ static void tcm_qla2xxx_clear_nacl_from_fcport_map(struct qla_tgt_sess *sess) pr_debug("Removed from fcport_map: %p for WWNN: 0x%016LX, port_id: 0x%06x\n", se_nacl, nacl->nport_wwnn, nacl->nport_id); + /* + * Now clear the se_nacl and session pointers from our HW lport lookup + * table mapping for this initiator's fabric S_ID and LOOP_ID entries. + * + * This is done ahead of callbacks into tcm_qla2xxx_free_session() -> + * target_wait_for_sess_cmds() before the session waits for outstanding + * I/O to complete, to avoid a race between session shutdown execution + * and incoming ATIOs or TMRs picking up a stale se_node_act reference. + */ + tcm_qla2xxx_clear_sess_lookup(lport, nacl, sess); +} + +static void tcm_qla2xxx_release_session(struct kref *kref) +{ + struct se_session *se_sess = container_of(kref, + struct se_session, sess_kref); + + qlt_unreg_sess(se_sess->fabric_sess_ptr); +} + +static void tcm_qla2xxx_put_session(struct se_session *se_sess) +{ + struct qla_tgt_sess *sess = se_sess->fabric_sess_ptr; + struct qla_hw_data *ha = sess->vha->hw; + unsigned long flags; + + spin_lock_irqsave(&ha->hardware_lock, flags); + kref_put(&se_sess->sess_kref, tcm_qla2xxx_release_session); + spin_unlock_irqrestore(&ha->hardware_lock, flags); } static void tcm_qla2xxx_put_sess(struct qla_tgt_sess *sess) { - target_put_session(sess->se_sess); + tcm_qla2xxx_put_session(sess->se_sess); } static void tcm_qla2xxx_shutdown_sess(struct qla_tgt_sess *sess) @@ -859,14 +833,10 @@ static struct se_node_acl *tcm_qla2xxx_make_nodeacl( struct config_group *group, const char *name) { - struct se_wwn *se_wwn = se_tpg->se_tpg_wwn; - struct tcm_qla2xxx_lport *lport = container_of(se_wwn, - struct tcm_qla2xxx_lport, lport_wwn); struct se_node_acl *se_nacl, *se_nacl_new; struct tcm_qla2xxx_nacl *nacl; u64 wwnn; u32 qla2xxx_nexus_depth; - int rc; if (tcm_qla2xxx_parse_wwn(name, &wwnn, 1) < 0) return ERR_PTR(-EINVAL); @@ -893,16 +863,6 @@ static struct se_node_acl *tcm_qla2xxx_make_nodeacl( nacl = container_of(se_nacl, struct tcm_qla2xxx_nacl, se_node_acl); nacl->nport_wwnn = wwnn; tcm_qla2xxx_format_wwn(&nacl->nport_name[0], TCM_QLA2XXX_NAMELEN, wwnn); - /* - * Setup a se_nacl handle based on an a matching struct fc_rport setup - * via drivers/scsi/qla2xxx/qla_init.c:qla2x00_reg_remote_port() - */ - rc = tcm_qla2xxx_setup_nacl_from_rport(se_tpg, se_nacl, lport, - nacl, wwnn); - if (rc < 0) { - tcm_qla2xxx_release_fabric_acl(se_tpg, se_nacl_new); - return ERR_PTR(rc); - } return se_nacl; } @@ -1390,6 +1350,25 @@ static void tcm_qla2xxx_set_sess_by_loop_id( nacl->qla_tgt_sess, new_se_nacl, new_se_nacl->initiatorname); } +/* + * Should always be called with qla_hw_data->hardware_lock held. + */ +static void tcm_qla2xxx_clear_sess_lookup(struct tcm_qla2xxx_lport *lport, + struct tcm_qla2xxx_nacl *nacl, struct qla_tgt_sess *sess) +{ + struct se_session *se_sess = sess->se_sess; + unsigned char be_sid[3]; + + be_sid[0] = sess->s_id.b.domain; + be_sid[1] = sess->s_id.b.area; + be_sid[2] = sess->s_id.b.al_pa; + + tcm_qla2xxx_set_sess_by_s_id(lport, NULL, nacl, se_sess, + sess, be_sid); + tcm_qla2xxx_set_sess_by_loop_id(lport, NULL, nacl, se_sess, + sess, sess->loop_id); +} + static void tcm_qla2xxx_free_session(struct qla_tgt_sess *sess) { struct qla_tgt *tgt = sess->tgt; @@ -1398,8 +1377,6 @@ static void tcm_qla2xxx_free_session(struct qla_tgt_sess *sess) struct se_node_acl *se_nacl; struct tcm_qla2xxx_lport *lport; struct tcm_qla2xxx_nacl *nacl; - unsigned char be_sid[3]; - unsigned long flags; BUG_ON(in_interrupt()); @@ -1419,21 +1396,6 @@ static void tcm_qla2xxx_free_session(struct qla_tgt_sess *sess) return; } target_wait_for_sess_cmds(se_sess, 0); - /* - * And now clear the se_nacl and session pointers from our HW lport - * mappings for fabric S_ID and LOOP_ID. - */ - memset(&be_sid, 0, 3); - be_sid[0] = sess->s_id.b.domain; - be_sid[1] = sess->s_id.b.area; - be_sid[2] = sess->s_id.b.al_pa; - - spin_lock_irqsave(&ha->hardware_lock, flags); - tcm_qla2xxx_set_sess_by_s_id(lport, NULL, nacl, se_sess, - sess, be_sid); - tcm_qla2xxx_set_sess_by_loop_id(lport, NULL, nacl, se_sess, - sess, sess->loop_id); - spin_unlock_irqrestore(&ha->hardware_lock, flags); transport_deregister_session_configfs(sess->se_sess); transport_deregister_session(sess->se_sess); @@ -1731,6 +1693,7 @@ static struct target_core_fabric_ops tcm_qla2xxx_ops = { .new_cmd_map = NULL, .check_stop_free = tcm_qla2xxx_check_stop_free, .release_cmd = tcm_qla2xxx_release_cmd, + .put_session = tcm_qla2xxx_put_session, .shutdown_session = tcm_qla2xxx_shutdown_session, .close_session = tcm_qla2xxx_close_session, .sess_get_index = tcm_qla2xxx_sess_get_index, @@ -1779,6 +1742,7 @@ static struct target_core_fabric_ops tcm_qla2xxx_npiv_ops = { .tpg_release_fabric_acl = tcm_qla2xxx_release_fabric_acl, .tpg_get_inst_index = tcm_qla2xxx_tpg_get_inst_index, .release_cmd = tcm_qla2xxx_release_cmd, + .put_session = tcm_qla2xxx_put_session, .shutdown_session = tcm_qla2xxx_shutdown_session, .close_session = tcm_qla2xxx_close_session, .sess_get_index = tcm_qla2xxx_sess_get_index, diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 61c82a345f82..bbbc9c918d4c 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -90,11 +90,9 @@ unsigned int scsi_logging_level; EXPORT_SYMBOL(scsi_logging_level); #endif -#if IS_ENABLED(CONFIG_PM) || IS_ENABLED(CONFIG_BLK_DEV_SD) -/* sd and scsi_pm need to coordinate flushing async actions */ +/* sd, scsi core and power management need to coordinate flushing async actions */ LIST_HEAD(scsi_sd_probe_domain); EXPORT_SYMBOL(scsi_sd_probe_domain); -#endif /* NB: These are exposed through /proc/scsi/scsi and form part of the ABI. * You may not alter any existing entry (although adding new ones is diff --git a/drivers/scsi/scsi_wait_scan.c b/drivers/scsi/scsi_wait_scan.c index ae7814874618..072734538876 100644 --- a/drivers/scsi/scsi_wait_scan.c +++ b/drivers/scsi/scsi_wait_scan.c @@ -22,11 +22,6 @@ static int __init wait_scan_init(void) * and might not yet have reached the scsi async scanning */ wait_for_device_probe(); - /* - * and then we wait for the actual asynchronous scsi scan - * to finish. - */ - scsi_complete_async_scans(); return 0; } diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 6f0a4c612b3b..6f72b80121a0 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1899,6 +1899,8 @@ static int sd_try_rc16_first(struct scsi_device *sdp) { if (sdp->host->max_cmd_len < 16) return 0; + if (sdp->try_rc_10_first) + return 0; if (sdp->scsi_level > SCSI_SPC_2) return 1; if (scsi_device_protection(sdp)) diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 46ef5fe51db5..0c73dd4f43a0 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -801,7 +801,7 @@ static int omap2_mcspi_setup(struct spi_device *spi) mcspi_dma = &mcspi->dma_channels[spi->chip_select]; if (!cs) { - cs = devm_kzalloc(&spi->dev , sizeof *cs, GFP_KERNEL); + cs = kzalloc(sizeof *cs, GFP_KERNEL); if (!cs) return -ENOMEM; cs->base = mcspi->base + spi->chip_select * 0x14; @@ -842,6 +842,7 @@ static void omap2_mcspi_cleanup(struct spi_device *spi) cs = spi->controller_state; list_del(&cs->node); + kfree(cs); } if (spi->chip_select < spi->master->num_chipselect) { diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c index 1c3d6386ea36..aeac1caba3f9 100644 --- a/drivers/staging/comedi/drivers.c +++ b/drivers/staging/comedi/drivers.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -981,6 +982,8 @@ void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver, } EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister); +#if IS_ENABLED(CONFIG_USB) + static int comedi_old_usb_auto_config(struct usb_interface *intf, struct comedi_driver *driver) { @@ -1043,3 +1046,5 @@ void comedi_usb_driver_unregister(struct comedi_driver *comedi_driver, comedi_driver_unregister(comedi_driver); } EXPORT_SYMBOL_GPL(comedi_usb_driver_unregister); + +#endif diff --git a/drivers/staging/gdm72xx/netlink_k.c b/drivers/staging/gdm72xx/netlink_k.c index 292af0f7f451..51665132c61b 100644 --- a/drivers/staging/gdm72xx/netlink_k.c +++ b/drivers/staging/gdm72xx/netlink_k.c @@ -104,7 +104,7 @@ struct sock *netlink_init(int unit, void (*cb)(struct net_device *dev, u16 type, void netlink_exit(struct sock *sock) { - sock_release(sock->sk_socket); + netlink_kernel_release(sock); } int netlink_send(struct sock *sock, int group, u16 type, void *msg, int len) diff --git a/drivers/staging/iio/Documentation/device.txt b/drivers/staging/iio/Documentation/device.txt index 0338c7cd0a8b..f03fbd3bb454 100644 --- a/drivers/staging/iio/Documentation/device.txt +++ b/drivers/staging/iio/Documentation/device.txt @@ -29,8 +29,6 @@ Then fill in the following: * info->driver_module: Set to THIS_MODULE. Used to ensure correct ownership of various resources allocate by the core. - * info->num_interrupt_lines: - Number of event triggering hardware lines the device has. * info->event_attrs: Attributes used to enable / disable hardware events. * info->attrs: diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 2490dd25093b..8f1b3af02f29 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -13,6 +13,7 @@ config AD7291 config AD7298 tristate "Analog Devices AD7298 ADC driver" depends on SPI + select IIO_KFIFO_BUF if IIO_BUFFER help Say yes here to build support for Analog Devices AD7298 8 Channel ADC with temperature sensor. diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c index 10ab6dc823b9..a13afff2dfe6 100644 --- a/drivers/staging/iio/adc/ad7606_core.c +++ b/drivers/staging/iio/adc/ad7606_core.c @@ -235,7 +235,8 @@ static const struct attribute_group ad7606_attribute_group_range = { .indexed = 1, \ .channel = num, \ .address = num, \ - .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .scan_index = num, \ .scan_type = IIO_ST('s', 16, 16, 0), \ } diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c index 3295ea63f3eb..97ef67036e3f 100644 --- a/drivers/staging/media/lirc/lirc_serial.c +++ b/drivers/staging/media/lirc/lirc_serial.c @@ -129,6 +129,7 @@ static void send_space_homebrew(long length); static struct lirc_serial hardware[] = { [LIRC_HOMEBREW] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_HOMEBREW].lock), .signal_pin = UART_MSR_DCD, .signal_pin_change = UART_MSR_DDCD, .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR), @@ -145,6 +146,7 @@ static struct lirc_serial hardware[] = { }, [LIRC_IRDEO] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO].lock), .signal_pin = UART_MSR_DSR, .signal_pin_change = UART_MSR_DDSR, .on = UART_MCR_OUT2, @@ -156,6 +158,7 @@ static struct lirc_serial hardware[] = { }, [LIRC_IRDEO_REMOTE] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO_REMOTE].lock), .signal_pin = UART_MSR_DSR, .signal_pin_change = UART_MSR_DDSR, .on = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2), @@ -167,6 +170,7 @@ static struct lirc_serial hardware[] = { }, [LIRC_ANIMAX] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_ANIMAX].lock), .signal_pin = UART_MSR_DCD, .signal_pin_change = UART_MSR_DDCD, .on = 0, @@ -177,6 +181,7 @@ static struct lirc_serial hardware[] = { }, [LIRC_IGOR] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IGOR].lock), .signal_pin = UART_MSR_DSR, .signal_pin_change = UART_MSR_DDSR, .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR), @@ -201,6 +206,7 @@ static struct lirc_serial hardware[] = { * See also http://www.nslu2-linux.org for this device */ [LIRC_NSLU2] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_NSLU2].lock), .signal_pin = UART_MSR_CTS, .signal_pin_change = UART_MSR_DCTS, .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR), diff --git a/drivers/staging/omapdrm/omap_fbdev.c b/drivers/staging/omapdrm/omap_fbdev.c index 11acd4c35ed2..8c6ed3b0c6f6 100644 --- a/drivers/staging/omapdrm/omap_fbdev.c +++ b/drivers/staging/omapdrm/omap_fbdev.c @@ -208,7 +208,8 @@ static int omap_fbdev_create(struct drm_fb_helper *helper, */ ret = omap_gem_get_paddr(fbdev->bo, &paddr, true); if (ret) { - dev_err(dev->dev, "could not map (paddr)!\n"); + dev_err(dev->dev, + "could not map (paddr)! Skipping framebuffer alloc\n"); ret = -ENOMEM; goto fail; } @@ -388,8 +389,11 @@ void omap_fbdev_free(struct drm_device *dev) fbi = helper->fbdev; - unregister_framebuffer(fbi); - framebuffer_release(fbi); + /* only cleanup framebuffer if it is present */ + if (fbi) { + unregister_framebuffer(fbi); + framebuffer_release(fbi); + } drm_fb_helper_fini(helper); diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c index 9bd18e2d0513..69f616c6964e 100644 --- a/drivers/staging/rtl8712/usb_intf.c +++ b/drivers/staging/rtl8712/usb_intf.c @@ -102,6 +102,8 @@ static struct usb_device_id rtl871x_usb_id_tbl[] = { /* - */ {USB_DEVICE(0x20F4, 0x646B)}, {USB_DEVICE(0x083A, 0xC512)}, + {USB_DEVICE(0x25D4, 0x4CA1)}, + {USB_DEVICE(0x25D4, 0x4CAB)}, /* RTL8191SU */ /* Realtek */ diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index e624b836469c..91799973081a 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -374,8 +374,9 @@ int target_emulate_set_target_port_groups(struct se_cmd *cmd) out: transport_kunmap_data_sg(cmd); - target_complete_cmd(cmd, GOOD); - return 0; + if (!rc) + target_complete_cmd(cmd, GOOD); + return rc; } static inline int core_alua_state_nonoptimized( diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 9888693a18fe..664f6e775d0e 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -1095,7 +1095,7 @@ int target_emulate_write_same(struct se_cmd *cmd) if (num_blocks != 0) range = num_blocks; else - range = (dev->transport->get_blocks(dev) - lba); + range = (dev->transport->get_blocks(dev) - lba) + 1; pr_debug("WRITE_SAME UNMAP: LBA: %llu Range: %llu\n", (unsigned long long)lba, (unsigned long long)range); diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 85564998500a..a1bcd927a9e6 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -2031,7 +2031,7 @@ static int __core_scsi3_write_aptpl_to_file( if (IS_ERR(file) || !file || !file->f_dentry) { pr_err("filp_open(%s) for APTPL metadata" " failed\n", path); - return (PTR_ERR(file) < 0 ? PTR_ERR(file) : -ENOENT); + return IS_ERR(file) ? PTR_ERR(file) : -ENOENT; } iov[0].iov_base = &buf[0]; @@ -3818,7 +3818,7 @@ int target_scsi3_emulate_pr_out(struct se_cmd *cmd) " SPC-2 reservation is held, returning" " RESERVATION_CONFLICT\n"); cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; - ret = EINVAL; + ret = -EINVAL; goto out; } @@ -3828,7 +3828,8 @@ int target_scsi3_emulate_pr_out(struct se_cmd *cmd) */ if (!cmd->se_sess) { cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; - return -EINVAL; + ret = -EINVAL; + goto out; } if (cmd->data_length < 24) { diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index b05fdc0c05d3..634d0f31a28c 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -315,7 +315,7 @@ void transport_register_session( } EXPORT_SYMBOL(transport_register_session); -static void target_release_session(struct kref *kref) +void target_release_session(struct kref *kref) { struct se_session *se_sess = container_of(kref, struct se_session, sess_kref); @@ -332,6 +332,12 @@ EXPORT_SYMBOL(target_get_session); void target_put_session(struct se_session *se_sess) { + struct se_portal_group *tpg = se_sess->se_tpg; + + if (tpg->se_tpg_tfo->put_session != NULL) { + tpg->se_tpg_tfo->put_session(se_sess); + return; + } kref_put(&se_sess->sess_kref, target_release_session); } EXPORT_SYMBOL(target_put_session); diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index f03fb9730f5b..5b65f33939a8 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -230,6 +230,8 @@ u32 ft_get_task_tag(struct se_cmd *se_cmd) { struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd); + if (cmd->aborted) + return ~0; return fc_seq_exch(cmd->seq)->rxid; } diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c index cb99da920068..87901fa74dd7 100644 --- a/drivers/target/tcm_fc/tfc_sess.c +++ b/drivers/target/tcm_fc/tfc_sess.c @@ -58,7 +58,8 @@ static struct ft_tport *ft_tport_create(struct fc_lport *lport) struct ft_tport *tport; int i; - tport = rcu_dereference(lport->prov[FC_TYPE_FCP]); + tport = rcu_dereference_protected(lport->prov[FC_TYPE_FCP], + lockdep_is_held(&ft_lport_lock)); if (tport && tport->tpg) return tport; diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 514a691abea0..3ab2bd540b54 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -23,6 +23,7 @@ config SPEAR_THERMAL bool "SPEAr thermal sensor driver" depends on THERMAL depends on PLAT_SPEAR + depends on OF help Enable this to plug the SPEAr thermal sensor driver into the Linux thermal framework diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c index c2e32df3b164..5f8ee39f2000 100644 --- a/drivers/thermal/spear_thermal.c +++ b/drivers/thermal/spear_thermal.c @@ -20,9 +20,9 @@ #include #include #include +#include #include #include -#include #include #define MD_FACTOR 1000 @@ -103,21 +103,20 @@ static int spear_thermal_probe(struct platform_device *pdev) { struct thermal_zone_device *spear_thermal = NULL; struct spear_thermal_dev *stdev; - struct spear_thermal_pdata *pdata; - int ret = 0; + struct device_node *np = pdev->dev.of_node; struct resource *stres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + int ret = 0, val; + + if (!np || !of_property_read_u32(np, "st,thermal-flags", &val)) { + dev_err(&pdev->dev, "Failed: DT Pdata not passed\n"); + return -EINVAL; + } if (!stres) { dev_err(&pdev->dev, "memory resource missing\n"); return -ENODEV; } - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) { - dev_err(&pdev->dev, "platform data is NULL\n"); - return -EINVAL; - } - stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL); if (!stdev) { dev_err(&pdev->dev, "kzalloc fail\n"); @@ -144,10 +143,10 @@ static int spear_thermal_probe(struct platform_device *pdev) goto put_clk; } - stdev->flags = pdata->thermal_flags; + stdev->flags = val; writel_relaxed(stdev->flags, stdev->thermal_base); - spear_thermal = thermal_zone_device_register("spear_thermal", 0, + spear_thermal = thermal_zone_device_register("spear_thermal", 0, 0, stdev, &ops, 0, 0, 0, 0); if (IS_ERR(spear_thermal)) { dev_err(&pdev->dev, "thermal zone device is NULL\n"); @@ -189,6 +188,12 @@ static int spear_thermal_exit(struct platform_device *pdev) return 0; } +static const struct of_device_id spear_thermal_id_table[] = { + { .compatible = "st,thermal-spear1340" }, + {} +}; +MODULE_DEVICE_TABLE(of, spear_thermal_id_table); + static struct platform_driver spear_thermal_driver = { .probe = spear_thermal_probe, .remove = spear_thermal_exit, @@ -196,6 +201,7 @@ static struct platform_driver spear_thermal_driver = { .name = "spear_thermal", .owner = THIS_MODULE, .pm = &spear_thermal_pm_ops, + .of_match_table = of_match_ptr(spear_thermal_id_table), }, }; diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 022bacb71a7e..2d7a9fe8f365 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -195,6 +195,28 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr, } } +static ssize_t +trip_point_temp_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int trip, ret; + unsigned long temperature; + + if (!tz->ops->set_trip_temp) + return -EPERM; + + if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip)) + return -EINVAL; + + if (kstrtoul(buf, 10, &temperature)) + return -EINVAL; + + ret = tz->ops->set_trip_temp(tz, trip, temperature); + + return ret ? ret : count; +} + static ssize_t trip_point_temp_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -217,6 +239,52 @@ trip_point_temp_show(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%ld\n", temperature); } +static ssize_t +trip_point_hyst_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int trip, ret; + unsigned long temperature; + + if (!tz->ops->set_trip_hyst) + return -EPERM; + + if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip)) + return -EINVAL; + + if (kstrtoul(buf, 10, &temperature)) + return -EINVAL; + + /* + * We are not doing any check on the 'temperature' value + * here. The driver implementing 'set_trip_hyst' has to + * take care of this. + */ + ret = tz->ops->set_trip_hyst(tz, trip, temperature); + + return ret ? ret : count; +} + +static ssize_t +trip_point_hyst_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int trip, ret; + unsigned long temperature; + + if (!tz->ops->get_trip_hyst) + return -EPERM; + + if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip)) + return -EINVAL; + + ret = tz->ops->get_trip_hyst(tz, trip, &temperature); + + return ret ? ret : sprintf(buf, "%ld\n", temperature); +} + static ssize_t passive_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -283,33 +351,6 @@ static DEVICE_ATTR(temp, 0444, temp_show, NULL); static DEVICE_ATTR(mode, 0644, mode_show, mode_store); static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store); -static struct device_attribute trip_point_attrs[] = { - __ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL), - __ATTR(trip_point_0_temp, 0444, trip_point_temp_show, NULL), - __ATTR(trip_point_1_type, 0444, trip_point_type_show, NULL), - __ATTR(trip_point_1_temp, 0444, trip_point_temp_show, NULL), - __ATTR(trip_point_2_type, 0444, trip_point_type_show, NULL), - __ATTR(trip_point_2_temp, 0444, trip_point_temp_show, NULL), - __ATTR(trip_point_3_type, 0444, trip_point_type_show, NULL), - __ATTR(trip_point_3_temp, 0444, trip_point_temp_show, NULL), - __ATTR(trip_point_4_type, 0444, trip_point_type_show, NULL), - __ATTR(trip_point_4_temp, 0444, trip_point_temp_show, NULL), - __ATTR(trip_point_5_type, 0444, trip_point_type_show, NULL), - __ATTR(trip_point_5_temp, 0444, trip_point_temp_show, NULL), - __ATTR(trip_point_6_type, 0444, trip_point_type_show, NULL), - __ATTR(trip_point_6_temp, 0444, trip_point_temp_show, NULL), - __ATTR(trip_point_7_type, 0444, trip_point_type_show, NULL), - __ATTR(trip_point_7_temp, 0444, trip_point_temp_show, NULL), - __ATTR(trip_point_8_type, 0444, trip_point_type_show, NULL), - __ATTR(trip_point_8_temp, 0444, trip_point_temp_show, NULL), - __ATTR(trip_point_9_type, 0444, trip_point_type_show, NULL), - __ATTR(trip_point_9_temp, 0444, trip_point_temp_show, NULL), - __ATTR(trip_point_10_type, 0444, trip_point_type_show, NULL), - __ATTR(trip_point_10_temp, 0444, trip_point_temp_show, NULL), - __ATTR(trip_point_11_type, 0444, trip_point_type_show, NULL), - __ATTR(trip_point_11_temp, 0444, trip_point_temp_show, NULL), -}; - /* sys I/F for cooling device */ #define to_cooling_device(_dev) \ container_of(_dev, struct thermal_cooling_device, device) @@ -1088,10 +1129,114 @@ leave: } EXPORT_SYMBOL(thermal_zone_device_update); +/** + * create_trip_attrs - create attributes for trip points + * @tz: the thermal zone device + * @mask: Writeable trip point bitmap. + */ +static int create_trip_attrs(struct thermal_zone_device *tz, int mask) +{ + int indx; + int size = sizeof(struct thermal_attr) * tz->trips; + + tz->trip_type_attrs = kzalloc(size, GFP_KERNEL); + if (!tz->trip_type_attrs) + return -ENOMEM; + + tz->trip_temp_attrs = kzalloc(size, GFP_KERNEL); + if (!tz->trip_temp_attrs) { + kfree(tz->trip_type_attrs); + return -ENOMEM; + } + + if (tz->ops->get_trip_hyst) { + tz->trip_hyst_attrs = kzalloc(size, GFP_KERNEL); + if (!tz->trip_hyst_attrs) { + kfree(tz->trip_type_attrs); + kfree(tz->trip_temp_attrs); + return -ENOMEM; + } + } + + + for (indx = 0; indx < tz->trips; indx++) { + /* create trip type attribute */ + snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH, + "trip_point_%d_type", indx); + + sysfs_attr_init(&tz->trip_type_attrs[indx].attr.attr); + tz->trip_type_attrs[indx].attr.attr.name = + tz->trip_type_attrs[indx].name; + tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO; + tz->trip_type_attrs[indx].attr.show = trip_point_type_show; + + device_create_file(&tz->device, + &tz->trip_type_attrs[indx].attr); + + /* create trip temp attribute */ + snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH, + "trip_point_%d_temp", indx); + + sysfs_attr_init(&tz->trip_temp_attrs[indx].attr.attr); + tz->trip_temp_attrs[indx].attr.attr.name = + tz->trip_temp_attrs[indx].name; + tz->trip_temp_attrs[indx].attr.attr.mode = S_IRUGO; + tz->trip_temp_attrs[indx].attr.show = trip_point_temp_show; + if (mask & (1 << indx)) { + tz->trip_temp_attrs[indx].attr.attr.mode |= S_IWUSR; + tz->trip_temp_attrs[indx].attr.store = + trip_point_temp_store; + } + + device_create_file(&tz->device, + &tz->trip_temp_attrs[indx].attr); + + /* create Optional trip hyst attribute */ + if (!tz->ops->get_trip_hyst) + continue; + snprintf(tz->trip_hyst_attrs[indx].name, THERMAL_NAME_LENGTH, + "trip_point_%d_hyst", indx); + + sysfs_attr_init(&tz->trip_hyst_attrs[indx].attr.attr); + tz->trip_hyst_attrs[indx].attr.attr.name = + tz->trip_hyst_attrs[indx].name; + tz->trip_hyst_attrs[indx].attr.attr.mode = S_IRUGO; + tz->trip_hyst_attrs[indx].attr.show = trip_point_hyst_show; + if (tz->ops->set_trip_hyst) { + tz->trip_hyst_attrs[indx].attr.attr.mode |= S_IWUSR; + tz->trip_hyst_attrs[indx].attr.store = + trip_point_hyst_store; + } + + device_create_file(&tz->device, + &tz->trip_hyst_attrs[indx].attr); + } + return 0; +} + +static void remove_trip_attrs(struct thermal_zone_device *tz) +{ + int indx; + + for (indx = 0; indx < tz->trips; indx++) { + device_remove_file(&tz->device, + &tz->trip_type_attrs[indx].attr); + device_remove_file(&tz->device, + &tz->trip_temp_attrs[indx].attr); + if (tz->ops->get_trip_hyst) + device_remove_file(&tz->device, + &tz->trip_hyst_attrs[indx].attr); + } + kfree(tz->trip_type_attrs); + kfree(tz->trip_temp_attrs); + kfree(tz->trip_hyst_attrs); +} + /** * thermal_zone_device_register - register a new thermal zone device * @type: the thermal zone device type * @trips: the number of trip points the thermal zone support + * @mask: a bit string indicating the writeablility of trip points * @devdata: private device data * @ops: standard thermal zone device callbacks * @tc1: thermal coefficient 1 for passive calculations @@ -1107,7 +1252,7 @@ EXPORT_SYMBOL(thermal_zone_device_update); * section 11.1.5.1 of the ACPI specification 3.0. */ struct thermal_zone_device *thermal_zone_device_register(char *type, - int trips, void *devdata, + int trips, int mask, void *devdata, const struct thermal_zone_device_ops *ops, int tc1, int tc2, int passive_delay, int polling_delay) { @@ -1121,7 +1266,7 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, if (strlen(type) >= THERMAL_NAME_LENGTH) return ERR_PTR(-EINVAL); - if (trips > THERMAL_MAX_TRIPS || trips < 0) + if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips) return ERR_PTR(-EINVAL); if (!ops || !ops->get_temp) @@ -1175,15 +1320,11 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, goto unregister; } + result = create_trip_attrs(tz, mask); + if (result) + goto unregister; + for (count = 0; count < trips; count++) { - result = device_create_file(&tz->device, - &trip_point_attrs[count * 2]); - if (result) - break; - result = device_create_file(&tz->device, - &trip_point_attrs[count * 2 + 1]); - if (result) - goto unregister; tz->ops->get_trip_type(tz, count, &trip_type); if (trip_type == THERMAL_TRIP_PASSIVE) passive = 1; @@ -1232,7 +1373,6 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) { struct thermal_cooling_device *cdev; struct thermal_zone_device *pos = NULL; - int count; if (!tz) return; @@ -1259,13 +1399,8 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) device_remove_file(&tz->device, &dev_attr_temp); if (tz->ops->get_mode) device_remove_file(&tz->device, &dev_attr_mode); + remove_trip_attrs(tz); - for (count = 0; count < tz->trips; count++) { - device_remove_file(&tz->device, - &trip_point_attrs[count * 2]); - device_remove_file(&tz->device, - &trip_point_attrs[count * 2 + 1]); - } thermal_remove_hwmon_sysfs(tz); release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); idr_destroy(&tz->idr); diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c index ced26c8ccd57..0d2ea0c224c3 100644 --- a/drivers/tty/hvc/hvc_opal.c +++ b/drivers/tty/hvc/hvc_opal.c @@ -401,7 +401,7 @@ out: } #ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_RAW -void __init udbg_init_debug_opal(void) +void __init udbg_init_debug_opal_raw(void) { u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO; hvc_opal_privs[index] = &hvc_opal_boot_priv; diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index d3d91dae065c..944eaeb8e0cf 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -214,24 +214,24 @@ static int xen_hvm_console_init(void) /* already configured */ if (info->intf != NULL) return 0; - + /* + * If the toolstack (or the hypervisor) hasn't set these values, the + * default value is 0. Even though mfn = 0 and evtchn = 0 are + * theoretically correct values, in practice they never are and they + * mean that a legacy toolstack hasn't initialized the pv console correctly. + */ r = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v); - if (r < 0) { - kfree(info); - return -ENODEV; - } + if (r < 0 || v == 0) + goto err; info->evtchn = v; - hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v); - if (r < 0) { - kfree(info); - return -ENODEV; - } + v = 0; + r = hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v); + if (r < 0 || v == 0) + goto err; mfn = v; info->intf = ioremap(mfn << PAGE_SHIFT, PAGE_SIZE); - if (info->intf == NULL) { - kfree(info); - return -ENODEV; - } + if (info->intf == NULL) + goto err; info->vtermno = HVC_COOKIE; spin_lock(&xencons_lock); @@ -239,6 +239,9 @@ static int xen_hvm_console_init(void) spin_unlock(&xencons_lock); return 0; +err: + kfree(info); + return -ENODEV; } static int xen_pv_console_init(void) diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 47d061b9ad4d..6e1958a325bd 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -3113,7 +3113,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * /** * serial8250_register_8250_port - register a serial port - * @port: serial port template + * @up: serial port template * * Configure the serial port specified by the request. If the * port exists and is in use, it is hung up and unregistered diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 4ad721fb8405..c17923ec6e95 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -133,6 +133,10 @@ struct pl011_dmatx_data { struct uart_amba_port { struct uart_port port; struct clk *clk; + /* Two optional pin states - default & sleep */ + struct pinctrl *pinctrl; + struct pinctrl_state *pins_default; + struct pinctrl_state *pins_sleep; const struct vendor_data *vendor; unsigned int dmacr; /* dma control reg */ unsigned int im; /* interrupt mask */ @@ -1312,6 +1316,14 @@ static int pl011_startup(struct uart_port *port) unsigned int cr; int retval; + /* Optionaly enable pins to be muxed in and configured */ + if (!IS_ERR(uap->pins_default)) { + retval = pinctrl_select_state(uap->pinctrl, uap->pins_default); + if (retval) + dev_err(port->dev, + "could not set default pins\n"); + } + retval = clk_prepare(uap->clk); if (retval) goto out; @@ -1420,6 +1432,7 @@ static void pl011_shutdown(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; + int retval; /* * disable all interrupts @@ -1462,6 +1475,14 @@ static void pl011_shutdown(struct uart_port *port) */ clk_disable(uap->clk); clk_unprepare(uap->clk); + /* Optionally let pins go into sleep states */ + if (!IS_ERR(uap->pins_sleep)) { + retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep); + if (retval) + dev_err(port->dev, + "could not set pins to sleep state\n"); + } + if (uap->port.dev->platform_data) { struct amba_pl011_data *plat; @@ -1792,6 +1813,14 @@ static int __init pl011_console_setup(struct console *co, char *options) if (!uap) return -ENODEV; + /* Allow pins to be muxed in and configured */ + if (!IS_ERR(uap->pins_default)) { + ret = pinctrl_select_state(uap->pinctrl, uap->pins_default); + if (ret) + dev_err(uap->port.dev, + "could not set default pins\n"); + } + ret = clk_prepare(uap->clk); if (ret) return ret; @@ -1844,7 +1873,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) { struct uart_amba_port *uap; struct vendor_data *vendor = id->data; - struct pinctrl *pinctrl; void __iomem *base; int i, ret; @@ -1869,11 +1897,20 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) goto free; } - pinctrl = devm_pinctrl_get_select_default(&dev->dev); - if (IS_ERR(pinctrl)) { - ret = PTR_ERR(pinctrl); + uap->pinctrl = devm_pinctrl_get(&dev->dev); + if (IS_ERR(uap->pinctrl)) { + ret = PTR_ERR(uap->pinctrl); goto unmap; } + uap->pins_default = pinctrl_lookup_state(uap->pinctrl, + PINCTRL_STATE_DEFAULT); + if (IS_ERR(uap->pins_default)) + dev_err(&dev->dev, "could not get default pinstate\n"); + + uap->pins_sleep = pinctrl_lookup_state(uap->pinctrl, + PINCTRL_STATE_SLEEP); + if (IS_ERR(uap->pins_sleep)) + dev_dbg(&dev->dev, "could not get sleep pinstate\n"); uap->clk = clk_get(&dev->dev, NULL); if (IS_ERR(uap->clk)) { diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c index 34bd345da775..6ae2a58d62f2 100644 --- a/drivers/tty/serial/serial_txx9.c +++ b/drivers/tty/serial/serial_txx9.c @@ -466,7 +466,7 @@ static void serial_txx9_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&up->port.lock, flags); } -#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL) +#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || defined(CONFIG_CONSOLE_POLL) /* * Wait for transmitter & holding register to empty */ diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 4604153b7954..1bd9163bc118 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2179,6 +2179,16 @@ static int __devinit sci_init_single(struct platform_device *dev, return 0; } +static void sci_cleanup_single(struct sci_port *port) +{ + sci_free_gpios(port); + + clk_put(port->iclk); + clk_put(port->fclk); + + pm_runtime_disable(port->port.dev); +} + #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE static void serial_console_putchar(struct uart_port *port, int ch) { @@ -2360,14 +2370,10 @@ static int sci_remove(struct platform_device *dev) cpufreq_unregister_notifier(&port->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); - sci_free_gpios(port); - uart_remove_one_port(&sci_uart_driver, &port->port); - clk_put(port->iclk); - clk_put(port->fclk); + sci_cleanup_single(port); - pm_runtime_disable(&dev->dev); return 0; } @@ -2385,14 +2391,20 @@ static int __devinit sci_probe_single(struct platform_device *dev, index+1, SCI_NPORTS); dev_notice(&dev->dev, "Consider bumping " "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); - return 0; + return -EINVAL; } ret = sci_init_single(dev, sciport, index, p); if (ret) return ret; - return uart_add_one_port(&sci_uart_driver, &sciport->port); + ret = uart_add_one_port(&sci_uart_driver, &sciport->port); + if (ret) { + sci_cleanup_single(sciport); + return ret; + } + + return 0; } static int __devinit sci_probe(struct platform_device *dev) @@ -2413,24 +2425,22 @@ static int __devinit sci_probe(struct platform_device *dev) ret = sci_probe_single(dev, dev->id, p, sp); if (ret) - goto err_unreg; + return ret; sp->freq_transition.notifier_call = sci_notifier; ret = cpufreq_register_notifier(&sp->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); - if (unlikely(ret < 0)) - goto err_unreg; + if (unlikely(ret < 0)) { + sci_cleanup_single(sp); + return ret; + } #ifdef CONFIG_SH_STANDARD_BIOS sh_bios_gdb_detach(); #endif return 0; - -err_unreg: - sci_remove(dev); - return ret; } static int sci_suspend(struct device *dev) diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index c691eea51537..f5ed3d75fa5a 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -46,7 +46,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB) += misc/ -obj-$(CONFIG_USB) += phy/ +obj-$(CONFIG_USB_COMMON) += phy/ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/ obj-$(CONFIG_USB_ATM) += atm/ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index f2a120eea9d4..36a2a0b7b82c 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -567,6 +567,14 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) usb_autopm_put_interface(acm->control); + /* + * Unthrottle device in case the TTY was closed while throttled. + */ + spin_lock_irq(&acm->read_lock); + acm->throttled = 0; + acm->throttle_req = 0; + spin_unlock_irq(&acm->read_lock); + if (acm_submit_read_urbs(acm, GFP_KERNEL)) goto error_submit_read_urbs; diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index ea8b304f0e85..ee469274a3fe 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -55,6 +55,15 @@ static const struct usb_device_id wdm_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 9, /* NOTE: CDC ECM control interface! */ }, + { + /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */ + .match_flags = USB_DEVICE_ID_MATCH_VENDOR | + USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = HUAWEI_VENDOR_ID, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 57, /* NOTE: CDC ECM control interface! */ + }, { } }; @@ -491,6 +500,8 @@ retry: goto retry; } if (!desc->reslength) { /* zero length read */ + dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__); + clear_bit(WDM_READ, &desc->flags); spin_unlock_irq(&desc->iuspin); goto retry; } diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 57ed9e400c06..622b4a48e732 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -493,15 +493,6 @@ static int hcd_pci_suspend_noirq(struct device *dev) pci_save_state(pci_dev); - /* - * Some systems crash if an EHCI controller is in D3 during - * a sleep transition. We have to leave such controllers in D0. - */ - if (hcd->broken_pci_sleep) { - dev_dbg(dev, "Staying in PCI D0\n"); - return retval; - } - /* If the root hub is dead rather than suspended, disallow remote * wakeup. usb_hc_died() should ensure that both hosts are marked as * dying, so we only need to check the primary roothub. diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 04fb834c3fa1..8fb484984c86 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2324,12 +2324,16 @@ static unsigned hub_is_wusb(struct usb_hub *hub) static int hub_port_reset(struct usb_hub *hub, int port1, struct usb_device *udev, unsigned int delay, bool warm); -/* Is a USB 3.0 port in the Inactive state? */ -static bool hub_port_inactive(struct usb_hub *hub, u16 portstatus) +/* Is a USB 3.0 port in the Inactive or Complinance Mode state? + * Port worm reset is required to recover + */ +static bool hub_port_warm_reset_required(struct usb_hub *hub, u16 portstatus) { return hub_is_superspeed(hub->hdev) && - (portstatus & USB_PORT_STAT_LINK_STATE) == - USB_SS_PORT_LS_SS_INACTIVE; + (((portstatus & USB_PORT_STAT_LINK_STATE) == + USB_SS_PORT_LS_SS_INACTIVE) || + ((portstatus & USB_PORT_STAT_LINK_STATE) == + USB_SS_PORT_LS_COMP_MOD)) ; } static int hub_port_wait_reset(struct usb_hub *hub, int port1, @@ -2365,7 +2369,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, * * See https://bugzilla.kernel.org/show_bug.cgi?id=41752 */ - if (hub_port_inactive(hub, portstatus)) { + if (hub_port_warm_reset_required(hub, portstatus)) { int ret; if ((portchange & USB_PORT_STAT_C_CONNECTION)) @@ -3379,7 +3383,7 @@ int usb_disable_lpm(struct usb_device *udev) return 0; udev->lpm_disable_count++; - if ((udev->u1_params.timeout == 0 && udev->u1_params.timeout == 0)) + if ((udev->u1_params.timeout == 0 && udev->u2_params.timeout == 0)) return 0; /* If LPM is enabled, attempt to disable it. */ @@ -4408,9 +4412,7 @@ static void hub_events(void) /* Warm reset a USB3 protocol port if it's in * SS.Inactive state. */ - if (hub_is_superspeed(hub->hdev) && - (portstatus & USB_PORT_STAT_LINK_STATE) - == USB_SS_PORT_LS_SS_INACTIVE) { + if (hub_port_warm_reset_required(hub, portstatus)) { dev_dbg(hub_dev, "warm reset port %d\n", i); hub_port_reset(hub, i, NULL, HUB_BH_RESET_TIME, true); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index b548cf1dbc62..bdd1c6749d88 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1838,7 +1838,6 @@ free_interfaces: intfc = cp->intf_cache[i]; intf->altsetting = intfc->altsetting; intf->num_altsetting = intfc->num_altsetting; - intf->intf_assoc = find_iad(dev, cp, i); kref_get(&intfc->ref); alt = usb_altnum_to_altsetting(intf, 0); @@ -1851,6 +1850,8 @@ free_interfaces: if (!alt) alt = &intf->altsetting[0]; + intf->intf_assoc = + find_iad(dev, cp, alt->desc.bInterfaceNumber); intf->cur_altsetting = alt; usb_enable_interface(dev, intf, true); intf->dev.parent = &dev->dev; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 3df1a1973b05..ec70df7aba17 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1091,7 +1091,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, if (r == req) { /* wait until it is processed */ dwc3_stop_active_transfer(dwc, dep->number); - goto out0; + goto out1; } dev_err(dwc->dev, "request %p was not queued to %s\n", request, ep->name); @@ -1099,6 +1099,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, goto out0; } +out1: /* giveback the request */ dwc3_gadget_giveback(dep, req, -ECONNRESET); diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index e23bf7984aaf..9a9bced813ed 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -599,12 +599,6 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) spin_lock_irqsave(&ep->udc->lock, flags); - if (ep->ep.desc) { - spin_unlock_irqrestore(&ep->udc->lock, flags); - DBG(DBG_ERR, "ep%d already enabled\n", ep->index); - return -EBUSY; - } - ep->ep.desc = desc; ep->ep.maxpacket = maxpacket; diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 51881f3bd07a..b09452d6f33a 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -1596,7 +1596,7 @@ static int qe_ep_enable(struct usb_ep *_ep, ep = container_of(_ep, struct qe_ep, ep); /* catch various bogus parameters */ - if (!_ep || !desc || ep->ep.desc || _ep->name == ep_name[0] || + if (!_ep || !desc || _ep->name == ep_name[0] || (desc->bDescriptorType != USB_DT_ENDPOINT)) return -EINVAL; diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h index 4c07ca9cebf3..7026919fc901 100644 --- a/drivers/usb/gadget/fsl_qe_udc.h +++ b/drivers/usb/gadget/fsl_qe_udc.h @@ -153,10 +153,10 @@ struct usb_ep_para{ #define USB_BUSMODE_DTB 0x02 /* Endpoint basic handle */ -#define ep_index(EP) ((EP)->desc->bEndpointAddress & 0xF) +#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress & 0xF) #define ep_maxpacket(EP) ((EP)->ep.maxpacket) #define ep_is_in(EP) ((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \ - USB_DIR_IN) : ((EP)->desc->bEndpointAddress \ + USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \ & USB_DIR_IN) == USB_DIR_IN) /* ep0 transfer state */ diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 28316858208b..bc6f9bb9994a 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -567,7 +567,7 @@ static int fsl_ep_enable(struct usb_ep *_ep, ep = container_of(_ep, struct fsl_ep, ep); /* catch various bogus parameters */ - if (!_ep || !desc || ep->ep.desc + if (!_ep || !desc || (desc->bDescriptorType != USB_DT_ENDPOINT)) return -EINVAL; @@ -2575,7 +2575,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev) /* for ep0: the desc defined here; * for other eps, gadget layer called ep_enable with defined desc */ - udc_controller->eps[0].desc = &fsl_ep0_desc; + udc_controller->eps[0].ep.desc = &fsl_ep0_desc; udc_controller->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD; /* setup the udc->eps[] for non-control endpoints and link diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index 5cd7b7e7ddb4..f61a967f7082 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -568,10 +568,10 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length) /* * ### internal used help routines. */ -#define ep_index(EP) ((EP)->desc->bEndpointAddress&0xF) +#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress&0xF) #define ep_maxpacket(EP) ((EP)->ep.maxpacket) #define ep_is_in(EP) ( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \ - USB_DIR_IN ):((EP)->desc->bEndpointAddress \ + USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \ & USB_DIR_IN)==USB_DIR_IN) #define get_ep_by_pipe(udc, pipe) ((pipe == 1)? &udc->eps[0]: \ &udc->eps[pipe]) diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index b241e6c6a7f2..3d28fb976c78 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -102,7 +102,7 @@ goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) unsigned long flags; ep = container_of(_ep, struct goku_ep, ep); - if (!_ep || !desc || ep->ep.desc + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) return -EINVAL; dev = ep->dev; diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c index 262acfd53e32..2ab0388d93eb 100644 --- a/drivers/usb/gadget/lpc32xx_udc.c +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -61,6 +61,7 @@ #include #include #ifdef CONFIG_USB_GADGET_DEBUG_FILES +#include #include #endif diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index dbcd1329495e..117a4bba1b8c 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -464,7 +464,7 @@ static int mv_ep_enable(struct usb_ep *_ep, ep = container_of(_ep, struct mv_ep, ep); udc = ep->udc; - if (!_ep || !desc || ep->ep.desc + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) return -EINVAL; diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 7ba32469c5bd..a460e8c204f4 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -153,7 +153,7 @@ static int omap_ep_enable(struct usb_ep *_ep, u16 maxp; /* catch various bogus parameters */ - if (!_ep || !desc || ep->ep.desc + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress || ep->maxpacket < usb_endpoint_maxp(desc)) { diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index d7c8cb3bf759..f7ff9e8e746a 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -218,7 +218,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep, struct pxa25x_udc *dev; ep = container_of (_ep, struct pxa25x_ep, ep); - if (!_ep || !desc || ep->ep.desc || _ep->name == ep0name + if (!_ep || !desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress || ep->fifo_size < usb_endpoint_maxp (desc)) { diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index 36c6836eeb0f..236b271871a0 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -760,7 +760,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep, u32 ecr = 0; hsep = our_ep(_ep); - if (!_ep || !desc || hsep->ep.desc || _ep->name == ep0name + if (!_ep || !desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || hsep->bEndpointAddress != desc->bEndpointAddress || ep_maxpacket(hsep) < usb_endpoint_maxp(desc)) diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 3de71d37d75e..f2e51f50e528 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1062,7 +1062,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep, ep = to_s3c2410_ep(_ep); - if (!_ep || !desc || ep->ep.desc + if (!_ep || !desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT) return -EINVAL; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b100f5f9f4b6..800be38c78b4 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -671,7 +671,9 @@ static int ehci_init(struct usb_hcd *hcd) hw = ehci->async->hw; hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma); hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD); +#if defined(CONFIG_PPC_PS3) hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7)); /* I = 1 */ +#endif hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT); hw->hw_qtd_next = EHCI_LIST_END(ehci); ehci->async->qh_state = QH_STATE_LINKED; diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index a44294d13494..c30435499a02 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -43,6 +43,7 @@ #include #include #include +#include /* EHCI Register Set */ #define EHCI_INSNREG04 (0xA0) @@ -55,6 +56,15 @@ #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 +/* Errata i693 */ +static struct clk *utmi_p1_fck; +static struct clk *utmi_p2_fck; +static struct clk *xclk60mhsp1_ck; +static struct clk *xclk60mhsp2_ck; +static struct clk *usbhost_p1_fck; +static struct clk *usbhost_p2_fck; +static struct clk *init_60m_fclk; + /*-------------------------------------------------------------------------*/ static const struct hc_driver ehci_omap_hc_driver; @@ -70,6 +80,41 @@ static inline u32 ehci_read(void __iomem *base, u32 reg) return __raw_readl(base + reg); } +/* Erratum i693 workaround sequence */ +static void omap_ehci_erratum_i693(struct ehci_hcd *ehci) +{ + int ret = 0; + + /* Switch to the internal 60 MHz clock */ + ret = clk_set_parent(utmi_p1_fck, init_60m_fclk); + if (ret != 0) + ehci_err(ehci, "init_60m_fclk set parent" + "failed error:%d\n", ret); + + ret = clk_set_parent(utmi_p2_fck, init_60m_fclk); + if (ret != 0) + ehci_err(ehci, "init_60m_fclk set parent" + "failed error:%d\n", ret); + + clk_enable(usbhost_p1_fck); + clk_enable(usbhost_p2_fck); + + /* Wait 1ms and switch back to the external clock */ + mdelay(1); + ret = clk_set_parent(utmi_p1_fck, xclk60mhsp1_ck); + if (ret != 0) + ehci_err(ehci, "xclk60mhsp1_ck set parent" + "failed error:%d\n", ret); + + ret = clk_set_parent(utmi_p2_fck, xclk60mhsp2_ck); + if (ret != 0) + ehci_err(ehci, "xclk60mhsp2_ck set parent" + "failed error:%d\n", ret); + + clk_disable(usbhost_p1_fck); + clk_disable(usbhost_p2_fck); +} + static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port) { struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); @@ -100,6 +145,50 @@ static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port) } } +static int omap_ehci_hub_control( + struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength +) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + u32 __iomem *status_reg = &ehci->regs->port_status[ + (wIndex & 0xff) - 1]; + u32 temp; + unsigned long flags; + int retval = 0; + + spin_lock_irqsave(&ehci->lock, flags); + + if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { + temp = ehci_readl(ehci, status_reg); + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { + retval = -EPIPE; + goto done; + } + + temp &= ~PORT_WKCONN_E; + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + + omap_ehci_erratum_i693(ehci); + + set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); + goto done; + } + + spin_unlock_irqrestore(&ehci->lock, flags); + + /* Handle the hub control events here */ + return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); +done: + spin_unlock_irqrestore(&ehci->lock, flags); + return retval; +} + static void disable_put_regulator( struct ehci_hcd_omap_platform_data *pdata) { @@ -192,14 +281,13 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) } } + /* Hold PHYs in reset while initializing EHCI controller */ if (pdata->phy_reset) { if (gpio_is_valid(pdata->reset_gpio_port[0])) - gpio_request_one(pdata->reset_gpio_port[0], - GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); + gpio_set_value_cansleep(pdata->reset_gpio_port[0], 0); if (gpio_is_valid(pdata->reset_gpio_port[1])) - gpio_request_one(pdata->reset_gpio_port[1], - GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); + gpio_set_value_cansleep(pdata->reset_gpio_port[1], 0); /* Hold the PHY in RESET for enough time till DIR is high */ udelay(10); @@ -241,6 +329,11 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params); ehci_reset(omap_ehci); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) { + dev_err(dev, "failed to add hcd with err %d\n", ret); + goto err_add_hcd; + } if (pdata->phy_reset) { /* Hold the PHY in RESET for enough time till @@ -255,17 +348,79 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1); } - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret) { - dev_err(dev, "failed to add hcd with err %d\n", ret); - goto err_add_hcd; - } - /* root ports should always stay powered */ ehci_port_power(omap_ehci, 1); + /* get clocks */ + utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); + if (IS_ERR(utmi_p1_fck)) { + ret = PTR_ERR(utmi_p1_fck); + dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); + goto err_add_hcd; + } + + xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); + if (IS_ERR(xclk60mhsp1_ck)) { + ret = PTR_ERR(xclk60mhsp1_ck); + dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret); + goto err_utmi_p1_fck; + } + + utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk"); + if (IS_ERR(utmi_p2_fck)) { + ret = PTR_ERR(utmi_p2_fck); + dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); + goto err_xclk60mhsp1_ck; + } + + xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck"); + if (IS_ERR(xclk60mhsp2_ck)) { + ret = PTR_ERR(xclk60mhsp2_ck); + dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret); + goto err_utmi_p2_fck; + } + + usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk"); + if (IS_ERR(usbhost_p1_fck)) { + ret = PTR_ERR(usbhost_p1_fck); + dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret); + goto err_xclk60mhsp2_ck; + } + + usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk"); + if (IS_ERR(usbhost_p2_fck)) { + ret = PTR_ERR(usbhost_p2_fck); + dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret); + goto err_usbhost_p1_fck; + } + + init_60m_fclk = clk_get(dev, "init_60m_fclk"); + if (IS_ERR(init_60m_fclk)) { + ret = PTR_ERR(init_60m_fclk); + dev_err(dev, "init_60m_fclk failed error:%d\n", ret); + goto err_usbhost_p2_fck; + } + return 0; +err_usbhost_p2_fck: + clk_put(usbhost_p2_fck); + +err_usbhost_p1_fck: + clk_put(usbhost_p1_fck); + +err_xclk60mhsp2_ck: + clk_put(xclk60mhsp2_ck); + +err_utmi_p2_fck: + clk_put(utmi_p2_fck); + +err_xclk60mhsp1_ck: + clk_put(xclk60mhsp1_ck); + +err_utmi_p1_fck: + clk_put(utmi_p1_fck); + err_add_hcd: disable_put_regulator(pdata); pm_runtime_put_sync(dev); @@ -294,6 +449,15 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) disable_put_regulator(dev->platform_data); iounmap(hcd->regs); usb_put_hcd(hcd); + + clk_put(utmi_p1_fck); + clk_put(utmi_p2_fck); + clk_put(xclk60mhsp1_ck); + clk_put(xclk60mhsp2_ck); + clk_put(usbhost_p1_fck); + clk_put(usbhost_p2_fck); + clk_put(init_60m_fclk); + pm_runtime_put_sync(dev); pm_runtime_disable(dev); @@ -364,7 +528,7 @@ static const struct hc_driver ehci_omap_hc_driver = { * root hub support */ .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, + .hub_control = omap_ehci_hub_control, .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index bc94d7bf072d..123481793a47 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -144,14 +144,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) hcd->has_tt = 1; tdi_reset(ehci); } - if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) { - /* EHCI #1 or #2 on 6 Series/C200 Series chipset */ - if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) { - ehci_info(ehci, "broken D3 during system sleep on ASUS\n"); - hcd->broken_pci_sleep = 1; - device_set_wakeup_capable(&pdev->dev, false); - } - } break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index ca819cdd0c5e..e7cb3925abf8 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -126,8 +126,7 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) goto fail_create_hcd; } - if (pdev->dev.platform_data != NULL) - pdata = pdev->dev.platform_data; + pdata = pdev->dev.platform_data; /* initialize hcd */ hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev, diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c index 9c2cc4633894..e9713d589e30 100644 --- a/drivers/usb/host/ehci-xilinx-of.c +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -270,14 +270,12 @@ static int ehci_hcd_xilinx_of_remove(struct platform_device *op) * * Properly shutdown the hcd, call driver's shutdown routine. */ -static int ehci_hcd_xilinx_of_shutdown(struct platform_device *op) +static void ehci_hcd_xilinx_of_shutdown(struct platform_device *op) { struct usb_hcd *hcd = dev_get_drvdata(&op->dev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); - - return 0; } diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 836772dfabd3..2f3619eefefa 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -317,7 +317,7 @@ static int ohci_bus_resume (struct usb_hcd *hcd) } /* Carry out the final steps of resuming the controller device */ -static void ohci_finish_controller_resume(struct usb_hcd *hcd) +static void __maybe_unused ohci_finish_controller_resume(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); int port; diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 2732ef660c5c..7b01094d7993 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -462,6 +462,42 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, } } +/* Updates Link Status for super Speed port */ +static void xhci_hub_report_link_state(u32 *status, u32 status_reg) +{ + u32 pls = status_reg & PORT_PLS_MASK; + + /* resume state is a xHCI internal state. + * Do not report it to usb core. + */ + if (pls == XDEV_RESUME) + return; + + /* When the CAS bit is set then warm reset + * should be performed on port + */ + if (status_reg & PORT_CAS) { + /* The CAS bit can be set while the port is + * in any link state. + * Only roothubs have CAS bit, so we + * pretend to be in compliance mode + * unless we're already in compliance + * or the inactive state. + */ + if (pls != USB_SS_PORT_LS_COMP_MOD && + pls != USB_SS_PORT_LS_SS_INACTIVE) { + pls = USB_SS_PORT_LS_COMP_MOD; + } + /* Return also connection bit - + * hub state machine resets port + * when this bit is set. + */ + pls |= USB_PORT_STAT_CONNECTION; + } + /* update status field */ + *status |= pls; +} + int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { @@ -606,13 +642,9 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, else status |= USB_PORT_STAT_POWER; } - /* Port Link State */ + /* Update Port Link State for super speed ports*/ if (hcd->speed == HCD_USB3) { - /* resume state is a xHCI internal state. - * Do not report it to usb core. - */ - if ((temp & PORT_PLS_MASK) != XDEV_RESUME) - status |= (temp & PORT_PLS_MASK); + xhci_hub_report_link_state(&status, temp); } if (bus_state->port_c_suspend & (1 << wIndex)) status |= 1 << USB_PORT_FEAT_C_SUSPEND; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index ec4338eec826..77689bd64cac 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -793,10 +793,9 @@ static void xhci_free_tt_info(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, int slot_id) { - struct list_head *tt; struct list_head *tt_list_head; - struct list_head *tt_next; - struct xhci_tt_bw_info *tt_info; + struct xhci_tt_bw_info *tt_info, *next; + bool slot_found = false; /* If the device never made it past the Set Address stage, * it may not have the real_port set correctly. @@ -808,34 +807,16 @@ static void xhci_free_tt_info(struct xhci_hcd *xhci, } tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts); - if (list_empty(tt_list_head)) - return; - - list_for_each(tt, tt_list_head) { - tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list); - if (tt_info->slot_id == slot_id) + list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) { + /* Multi-TT hubs will have more than one entry */ + if (tt_info->slot_id == slot_id) { + slot_found = true; + list_del(&tt_info->tt_list); + kfree(tt_info); + } else if (slot_found) { break; + } } - /* Cautionary measure in case the hub was disconnected before we - * stored the TT information. - */ - if (tt_info->slot_id != slot_id) - return; - - tt_next = tt->next; - tt_info = list_entry(tt, struct xhci_tt_bw_info, - tt_list); - /* Multi-TT hubs will have more than one entry */ - do { - list_del(tt); - kfree(tt_info); - tt = tt_next; - if (list_empty(tt_list_head)) - break; - tt_next = tt->next; - tt_info = list_entry(tt, struct xhci_tt_bw_info, - tt_list); - } while (tt_info->slot_id == slot_id); } int xhci_alloc_tt_info(struct xhci_hcd *xhci, @@ -1791,17 +1772,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) { struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); struct dev_info *dev_info, *next; - struct list_head *tt_list_head; - struct list_head *tt; - struct list_head *endpoints; - struct list_head *ep, *q; - struct xhci_tt_bw_info *tt_info; - struct xhci_interval_bw_table *bwt; - struct xhci_virt_ep *virt_ep; - unsigned long flags; int size; - int i; + int i, j, num_ports; /* Free the Event Ring Segment Table and the actual Event Ring */ size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); @@ -1860,21 +1833,22 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } spin_unlock_irqrestore(&xhci->lock, flags); - bwt = &xhci->rh_bw->bw_table; - for (i = 0; i < XHCI_MAX_INTERVAL; i++) { - endpoints = &bwt->interval_bw[i].endpoints; - list_for_each_safe(ep, q, endpoints) { - virt_ep = list_entry(ep, struct xhci_virt_ep, bw_endpoint_list); - list_del(&virt_ep->bw_endpoint_list); - kfree(virt_ep); + num_ports = HCS_MAX_PORTS(xhci->hcs_params1); + for (i = 0; i < num_ports; i++) { + struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table; + for (j = 0; j < XHCI_MAX_INTERVAL; j++) { + struct list_head *ep = &bwt->interval_bw[j].endpoints; + while (!list_empty(ep)) + list_del_init(ep->next); } } - tt_list_head = &xhci->rh_bw->tts; - list_for_each_safe(tt, q, tt_list_head) { - tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list); - list_del(tt); - kfree(tt_info); + for (i = 0; i < num_ports; i++) { + struct xhci_tt_bw_info *tt, *n; + list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) { + list_del(&tt->tt_list); + kfree(tt); + } } xhci->num_usb2_ports = 0; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 23b4aefd1036..8275645889da 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -885,6 +885,17 @@ static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci, num_trbs_free_temp = ep_ring->num_trbs_free; dequeue_temp = ep_ring->dequeue; + /* If we get two back-to-back stalls, and the first stalled transfer + * ends just before a link TRB, the dequeue pointer will be left on + * the link TRB by the code in the while loop. So we have to update + * the dequeue pointer one segment further, or we'll jump off + * the segment into la-la-land. + */ + if (last_trb(xhci, ep_ring, ep_ring->deq_seg, ep_ring->dequeue)) { + ep_ring->deq_seg = ep_ring->deq_seg->next; + ep_ring->dequeue = ep_ring->deq_seg->trbs; + } + while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) { /* We have more usable TRBs */ ep_ring->num_trbs_free++; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index afdc73ee84a6..a979cd0dbe0f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -795,8 +795,8 @@ int xhci_suspend(struct xhci_hcd *xhci) command = xhci_readl(xhci, &xhci->op_regs->command); command |= CMD_CSS; xhci_writel(xhci, command, &xhci->op_regs->command); - if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10*100)) { - xhci_warn(xhci, "WARN: xHC CMD_CSS timeout\n"); + if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) { + xhci_warn(xhci, "WARN: xHC save state timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; } @@ -848,8 +848,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) command |= CMD_CRS; xhci_writel(xhci, command, &xhci->op_regs->command); if (handshake(xhci, &xhci->op_regs->status, - STS_RESTORE, 0, 10*100)) { - xhci_dbg(xhci, "WARN: xHC CMD_CSS timeout\n"); + STS_RESTORE, 0, 10 * 1000)) { + xhci_warn(xhci, "WARN: xHC restore state timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; } @@ -3906,7 +3906,7 @@ static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev, default: dev_warn(&udev->dev, "%s: Can't get timeout for non-U1 or U2 state.\n", __func__); - return -EINVAL; + return USB3_LPM_DISABLED; } if (sel <= max_sel_pel && pel <= max_sel_pel) diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index de3d6e3e57be..55c0785810c9 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -341,7 +341,11 @@ struct xhci_op_regs { #define PORT_PLC (1 << 22) /* port configure error change - port failed to configure its link partner */ #define PORT_CEC (1 << 23) -/* bit 24 reserved */ +/* Cold Attach Status - xHC can set this bit to report device attached during + * Sx state. Warm port reset should be perfomed to clear this bit and move port + * to connected state. + */ +#define PORT_CAS (1 << 24) /* wake on connect (enable) */ #define PORT_WKCONN_E (1 << 25) /* wake on disconnect (enable) */ diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 768b4b55c816..9d63ba4d10d6 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -34,6 +34,7 @@ #include #include +#include #include diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h index 046c84433cad..371baa0ee509 100644 --- a/drivers/usb/musb/davinci.h +++ b/drivers/usb/musb/davinci.h @@ -15,7 +15,7 @@ */ /* Integrated highspeed/otg PHY */ -#define USBPHY_CTL_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x34) +#define USBPHY_CTL_PADDR 0x01c40034 #define USBPHY_DATAPOL BIT(11) /* (dm355) switch D+/D- */ #define USBPHY_PHYCLKGD BIT(8) #define USBPHY_SESNDEN BIT(7) /* v(sess_end) comparator */ @@ -27,7 +27,7 @@ #define USBPHY_OTGPDWN BIT(1) #define USBPHY_PHYPDWN BIT(0) -#define DM355_DEEPSLEEP_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x48) +#define DM355_DEEPSLEEP_PADDR 0x01c40048 #define DRVVBUS_FORCE BIT(2) #define DRVVBUS_OVERRIDE BIT(1) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index f42c29b11f71..95918dacc99a 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1232,6 +1232,7 @@ static int musb_gadget_disable(struct usb_ep *ep) } musb_ep->desc = NULL; + musb_ep->end_point.desc = NULL; /* abort all pending DMA and requests */ nuke(musb_ep, -ESHUTDOWN); diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index ef8d744800ac..e090c799d87b 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -375,11 +375,21 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb, */ if (list_empty(&qh->hep->urb_list)) { struct list_head *head; + struct dma_controller *dma = musb->dma_controller; - if (is_in) + if (is_in) { ep->rx_reinit = 1; - else + if (ep->rx_channel) { + dma->channel_release(ep->rx_channel); + ep->rx_channel = NULL; + } + } else { ep->tx_reinit = 1; + if (ep->tx_channel) { + dma->channel_release(ep->tx_channel); + ep->tx_channel = NULL; + } + } /* Clobber old pointers to this qh */ musb_ep_set_qh(ep, is_in, NULL); diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c index d2a9a8e691b9..0eabb049b6a9 100644 --- a/drivers/usb/otg/twl6030-usb.c +++ b/drivers/usb/otg/twl6030-usb.c @@ -305,9 +305,8 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) regulator_enable(twl->usb3v3); twl->asleep = 1; - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1); - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, - 0x10); + twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR); + twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET); status = USB_EVENT_ID; otg->default_a = true; twl->phy.state = OTG_STATE_A_IDLE; @@ -316,12 +315,10 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) atomic_notifier_call_chain(&twl->phy.notifier, status, otg->gadget); } else { - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, - 0x10); - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, - 0x1); + twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR); + twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); } - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status); + twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR); return IRQ_HANDLED; } @@ -343,7 +340,7 @@ static int twl6030_enable_irq(struct usb_phy *x) { struct twl6030_usb *twl = phy_to_twl(x); - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1); + twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C); twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C); diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 3cfabcba7447..e7cf84f0751a 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -2,11 +2,11 @@ # Physical Layer USB driver configuration # comment "USB Physical Layer drivers" - depends on USB + depends on USB || USB_GADGET config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" - depends on USB + depends on USB || USB_GADGET depends on I2C help Say Y here to add support for the NXP ISP1301 USB transceiver driver. diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 1b1926200ba7..1e71079ce33b 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -82,6 +82,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */ { USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */ { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */ + { USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */ { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ @@ -92,6 +93,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ + { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */ { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */ { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */ { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */ @@ -133,7 +135,13 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */ + { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */ + { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */ { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ + { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */ + { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */ + { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */ + { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */ { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */ @@ -145,7 +153,11 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ + { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */ + { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ + { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */ + { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */ { } /* Terminating Entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8c084ea34e26..bc912e5a3beb 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -737,6 +737,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) }, { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) }, { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index f3c7c78ede33..5661c7e2d415 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -784,6 +784,7 @@ #define RTSYSTEMS_VID 0x2100 /* Vendor ID */ #define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */ #define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */ +#define RTSYSTEMS_RTS01_PID 0x9e57 /* USB-RTS01 Radio Cable */ /* diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 105a6d898ca4..9b026bf7afef 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -39,13 +39,6 @@ MODULE_PARM_DESC(product, "User specified USB idProduct"); static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ -/* we want to look at all devices, as the vendor/product id can change - * depending on the command line argument */ -static const struct usb_device_id generic_serial_ids[] = { - {.driver_info = 42}, - {} -}; - /* All of the device info needed for the Generic Serial Converter */ struct usb_serial_driver usb_serial_generic_device = { .driver = { @@ -79,7 +72,8 @@ int usb_serial_generic_register(int _debug) USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT; /* register our generic driver with ourselves */ - retval = usb_serial_register_drivers(serial_drivers, "usbserial_generic", generic_serial_ids); + retval = usb_serial_register_drivers(serial_drivers, + "usbserial_generic", generic_device_ids); #endif return retval; } diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index d0ec1aa52719..a71fa0aa0406 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -309,13 +309,16 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial, MCT_U232_SET_REQUEST_TYPE, 0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE, WDR_TIMEOUT); - if (rc < 0) - dev_err(&serial->dev->dev, - "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc); + kfree(buf); + dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr); - kfree(buf); - return rc; + if (rc < 0) { + dev_err(&serial->dev->dev, + "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc); + return rc; + } + return 0; } /* mct_u232_set_modem_ctrl */ static int mct_u232_get_modem_stat(struct usb_serial *serial, diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 81423f7361db..d47eb06fe463 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -222,14 +222,6 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port) metro_priv->throttled = 0; spin_unlock_irqrestore(&metro_priv->lock, flags); - /* - * Force low_latency on so that our tty_push actually forces the data - * through, otherwise it is scheduled, and with high data rates (like - * with OHCI) data can get lost. - */ - if (tty) - tty->low_latency = 1; - /* Clear the urb pipe. */ usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 29160f8b5101..57eca2448424 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -190,7 +190,7 @@ static int device_type; -static const struct usb_device_id id_table[] __devinitconst = { +static const struct usb_device_id id_table[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)}, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 1aae9028cd0b..417ab1b0aa30 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -47,6 +47,7 @@ /* Function prototypes */ static int option_probe(struct usb_serial *serial, const struct usb_device_id *id); +static void option_release(struct usb_serial *serial); static int option_send_setup(struct usb_serial_port *port); static void option_instat_callback(struct urb *urb); @@ -150,6 +151,7 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_E14AC 0x14AC #define HUAWEI_PRODUCT_K3806 0x14AE #define HUAWEI_PRODUCT_K4605 0x14C6 +#define HUAWEI_PRODUCT_K5005 0x14C8 #define HUAWEI_PRODUCT_K3770 0x14C9 #define HUAWEI_PRODUCT_K3771 0x14CA #define HUAWEI_PRODUCT_K4510 0x14CB @@ -234,6 +236,7 @@ static void option_instat_callback(struct urb *urb); #define NOVATELWIRELESS_PRODUCT_G1 0xA001 #define NOVATELWIRELESS_PRODUCT_G1_M 0xA002 #define NOVATELWIRELESS_PRODUCT_G2 0xA010 +#define NOVATELWIRELESS_PRODUCT_MC551 0xB001 /* AMOI PRODUCTS */ #define AMOI_VENDOR_ID 0x1614 @@ -425,7 +428,7 @@ static void option_instat_callback(struct urb *urb); #define SAMSUNG_VENDOR_ID 0x04e8 #define SAMSUNG_PRODUCT_GT_B3730 0x6889 -/* YUGA products www.yuga-info.com*/ +/* YUGA products www.yuga-info.com gavin.kx@qq.com */ #define YUGA_VENDOR_ID 0x257A #define YUGA_PRODUCT_CEM600 0x1601 #define YUGA_PRODUCT_CEM610 0x1602 @@ -442,6 +445,8 @@ static void option_instat_callback(struct urb *urb); #define YUGA_PRODUCT_CEU516 0x160C #define YUGA_PRODUCT_CEU528 0x160D #define YUGA_PRODUCT_CEU526 0x160F +#define YUGA_PRODUCT_CEU881 0x161F +#define YUGA_PRODUCT_CEU882 0x162F #define YUGA_PRODUCT_CWM600 0x2601 #define YUGA_PRODUCT_CWM610 0x2602 @@ -457,23 +462,26 @@ static void option_instat_callback(struct urb *urb); #define YUGA_PRODUCT_CWU518 0x260B #define YUGA_PRODUCT_CWU516 0x260C #define YUGA_PRODUCT_CWU528 0x260D +#define YUGA_PRODUCT_CWU581 0x260E #define YUGA_PRODUCT_CWU526 0x260F +#define YUGA_PRODUCT_CWU582 0x261F +#define YUGA_PRODUCT_CWU583 0x262F -#define YUGA_PRODUCT_CLM600 0x2601 -#define YUGA_PRODUCT_CLM610 0x2602 -#define YUGA_PRODUCT_CLM500 0x2603 -#define YUGA_PRODUCT_CLM510 0x2604 -#define YUGA_PRODUCT_CLM800 0x2605 -#define YUGA_PRODUCT_CLM900 0x2606 +#define YUGA_PRODUCT_CLM600 0x3601 +#define YUGA_PRODUCT_CLM610 0x3602 +#define YUGA_PRODUCT_CLM500 0x3603 +#define YUGA_PRODUCT_CLM510 0x3604 +#define YUGA_PRODUCT_CLM800 0x3605 +#define YUGA_PRODUCT_CLM900 0x3606 -#define YUGA_PRODUCT_CLU718 0x2607 -#define YUGA_PRODUCT_CLU716 0x2608 -#define YUGA_PRODUCT_CLU728 0x2609 -#define YUGA_PRODUCT_CLU726 0x260A -#define YUGA_PRODUCT_CLU518 0x260B -#define YUGA_PRODUCT_CLU516 0x260C -#define YUGA_PRODUCT_CLU528 0x260D -#define YUGA_PRODUCT_CLU526 0x260F +#define YUGA_PRODUCT_CLU718 0x3607 +#define YUGA_PRODUCT_CLU716 0x3608 +#define YUGA_PRODUCT_CLU728 0x3609 +#define YUGA_PRODUCT_CLU726 0x360A +#define YUGA_PRODUCT_CLU518 0x360B +#define YUGA_PRODUCT_CLU516 0x360C +#define YUGA_PRODUCT_CLU528 0x360D +#define YUGA_PRODUCT_CLU526 0x360F /* Viettel products */ #define VIETTEL_VENDOR_ID 0x2262 @@ -489,6 +497,19 @@ static void option_instat_callback(struct urb *urb); /* MediaTek products */ #define MEDIATEK_VENDOR_ID 0x0e8d +#define MEDIATEK_PRODUCT_DC_1COM 0x00a0 +#define MEDIATEK_PRODUCT_DC_4COM 0x00a5 +#define MEDIATEK_PRODUCT_DC_5COM 0x00a4 +#define MEDIATEK_PRODUCT_7208_1COM 0x7101 +#define MEDIATEK_PRODUCT_7208_2COM 0x7102 +#define MEDIATEK_PRODUCT_FP_1COM 0x0003 +#define MEDIATEK_PRODUCT_FP_2COM 0x0023 +#define MEDIATEK_PRODUCT_FPDC_1COM 0x0043 +#define MEDIATEK_PRODUCT_FPDC_2COM 0x0033 + +/* Cellient products */ +#define CELLIENT_VENDOR_ID 0x2692 +#define CELLIENT_PRODUCT_MEN200 0x9005 /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { @@ -542,6 +563,10 @@ static const struct option_blacklist_info net_intf1_blacklist = { .reserved = BIT(1), }; +static const struct option_blacklist_info net_intf2_blacklist = { + .reserved = BIT(2), +}; + static const struct option_blacklist_info net_intf3_blacklist = { .reserved = BIT(3), }; @@ -666,6 +691,11 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) }, @@ -722,6 +752,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) }, + /* Novatel Ovation MC551 a.k.a. Verizon USB551L */ + { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, @@ -1080,6 +1112,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) }, @@ -1209,6 +1243,11 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) }, { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) }, { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU881) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU882) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU581) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU582) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU583) }, { USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) }, { USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */ @@ -1216,6 +1255,18 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) }, { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) }, /* MediaTek MT6276M modem & app port */ + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_1COM, 0x0a, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_1COM, 0x02, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_2COM, 0x02, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_1COM, 0x0a, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) }, + { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); @@ -1245,7 +1296,7 @@ static struct usb_serial_driver option_1port_device = { .ioctl = usb_wwan_ioctl, .attach = usb_wwan_startup, .disconnect = usb_wwan_disconnect, - .release = usb_wwan_release, + .release = option_release, .read_int_callback = option_instat_callback, #ifdef CONFIG_PM .suspend = usb_wwan_suspend, @@ -1259,35 +1310,6 @@ static struct usb_serial_driver * const serial_drivers[] = { static bool debug; -/* per port private data */ - -#define N_IN_URB 4 -#define N_OUT_URB 4 -#define IN_BUFLEN 4096 -#define OUT_BUFLEN 4096 - -struct option_port_private { - /* Input endpoints and buffer for this port */ - struct urb *in_urbs[N_IN_URB]; - u8 *in_buffer[N_IN_URB]; - /* Output endpoints and buffer for this port */ - struct urb *out_urbs[N_OUT_URB]; - u8 *out_buffer[N_OUT_URB]; - unsigned long out_busy; /* Bit vector of URBs in use */ - int opened; - struct usb_anchor delayed; - - /* Settings for the port */ - int rts_state; /* Handshaking pins (outputs) */ - int dtr_state; - int cts_state; /* Handshaking pins (inputs) */ - int dsr_state; - int dcd_state; - int ri_state; - - unsigned long tx_start_time[N_OUT_URB]; -}; - module_usb_serial_driver(serial_drivers, option_ids); static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason, @@ -1356,12 +1378,22 @@ static int option_probe(struct usb_serial *serial, return 0; } +static void option_release(struct usb_serial *serial) +{ + struct usb_wwan_intf_private *priv = usb_get_serial_data(serial); + + usb_wwan_release(serial); + + kfree(priv); +} + static void option_instat_callback(struct urb *urb) { int err; int status = urb->status; struct usb_serial_port *port = urb->context; - struct option_port_private *portdata = usb_get_serial_port_data(port); + struct usb_wwan_port_private *portdata = + usb_get_serial_port_data(port); dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata); @@ -1421,7 +1453,7 @@ static int option_send_setup(struct usb_serial_port *port) struct usb_serial *serial = port->serial; struct usb_wwan_intf_private *intfdata = (struct usb_wwan_intf_private *) serial->private; - struct option_port_private *portdata; + struct usb_wwan_port_private *portdata; int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber; int val = 0; diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 0d5fe59ebb9e..996015c5f1ac 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -105,7 +105,13 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */ {USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */ {USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ + {USB_DEVICE(0x1199, 0x9010)}, /* Sierra Wireless Gobi 3000 QDL */ + {USB_DEVICE(0x1199, 0x9012)}, /* Sierra Wireless Gobi 3000 QDL */ {USB_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */ + {USB_DEVICE(0x1199, 0x9014)}, /* Sierra Wireless Gobi 3000 QDL */ + {USB_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */ + {USB_DEVICE(0x1199, 0x9018)}, /* Sierra Wireless Gobi 3000 QDL */ + {USB_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */ {USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */ {USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */ { } /* Terminating entry */ diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index ba54a0a8235c..d423d36acc04 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -294,6 +294,10 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist }, + /* AT&T Direct IP LTE modems */ + { USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF), + .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, { USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist }, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 6a1b609a0d94..27483f91a4a3 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -659,12 +659,14 @@ exit: static struct usb_serial_driver *search_serial_device( struct usb_interface *iface) { - const struct usb_device_id *id; + const struct usb_device_id *id = NULL; struct usb_serial_driver *drv; + struct usb_driver *driver = to_usb_driver(iface->dev.driver); /* Check if the usb id matches a known device */ list_for_each_entry(drv, &usb_serial_driver_list, driver_list) { - id = get_iface_id(drv, iface); + if (drv->usb_driver == driver) + id = get_iface_id(drv, iface); if (id) return drv; } @@ -755,7 +757,7 @@ static int usb_serial_probe(struct usb_interface *interface, if (retval) { dbg("sub driver rejected device"); - kfree(serial); + usb_serial_put(serial); module_put(type->driver.owner); return retval; } @@ -827,7 +829,7 @@ static int usb_serial_probe(struct usb_interface *interface, */ if (num_bulk_in == 0 || num_bulk_out == 0) { dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n"); - kfree(serial); + usb_serial_put(serial); module_put(type->driver.owner); return -ENODEV; } @@ -841,7 +843,7 @@ static int usb_serial_probe(struct usb_interface *interface, if (num_ports == 0) { dev_err(&interface->dev, "Generic device with no bulk out, not allowed.\n"); - kfree(serial); + usb_serial_put(serial); module_put(type->driver.owner); return -EIO; } diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index a324a5d21e99..11418da9bc09 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -202,6 +202,12 @@ static int slave_configure(struct scsi_device *sdev) if (us->fflags & US_FL_NO_READ_CAPACITY_16) sdev->no_read_capacity_16 = 1; + /* + * Many devices do not respond properly to READ_CAPACITY_16. + * Tell the SCSI layer to try READ_CAPACITY_10 first. + */ + sdev->try_rc_10_first = 1; + /* assume SPC3 or latter devices support sense size > 18 */ if (sdev->scsi_level > SCSI_SPC_2) us->fflags |= US_FL_SANE_SENSE; diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 94dbd25caa30..112156f68afb 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -191,7 +191,9 @@ static int vhost_worker(void *data) struct vhost_dev *dev = data; struct vhost_work *work = NULL; unsigned uninitialized_var(seq); + mm_segment_t oldfs = get_fs(); + set_fs(USER_DS); use_mm(dev->mm); for (;;) { @@ -229,6 +231,7 @@ static int vhost_worker(void *data) } unuse_mm(dev->mm); + set_fs(oldfs); return 0; } diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index fa2b03750316..2979292650d6 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -88,7 +88,7 @@ config LCD_PLATFORM config LCD_TOSA tristate "Sharp SL-6000 LCD Driver" - depends on SPI && MACH_TOSA + depends on I2C && SPI && MACH_TOSA help If you have an Sharp SL-6000 Zaurus say Y to enable a driver for its LCD. diff --git a/drivers/video/backlight/ili9320.c b/drivers/video/backlight/ili9320.c index 6c9399341bcf..9327cd1b3143 100644 --- a/drivers/video/backlight/ili9320.c +++ b/drivers/video/backlight/ili9320.c @@ -263,7 +263,7 @@ int __devinit ili9320_probe_spi(struct spi_device *spi, EXPORT_SYMBOL_GPL(ili9320_probe_spi); -int __devexit ili9320_remove(struct ili9320 *ili) +int ili9320_remove(struct ili9320 *ili) { ili9320_power(ili, FB_BLANK_POWERDOWN); diff --git a/drivers/video/bfin_adv7393fb.c b/drivers/video/bfin_adv7393fb.c index 33ea874c87d2..9bdd4b0c18c8 100644 --- a/drivers/video/bfin_adv7393fb.c +++ b/drivers/video/bfin_adv7393fb.c @@ -353,18 +353,16 @@ adv7393_read_proc(char *page, char **start, off_t off, static int adv7393_write_proc(struct file *file, const char __user * buffer, - unsigned long count, void *data) + size_t count, void *data) { struct adv7393fb_device *fbdev = data; - char line[8]; unsigned int val; int ret; - ret = copy_from_user(line, buffer, count); + ret = kstrtouint_from_user(buffer, count, 0, &val); if (ret) return -EFAULT; - val = simple_strtoul(line, NULL, 0); adv7393_write(fbdev->client, val >> 8, val & 0xff); return count; diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c index 377dde3d5bfc..c95b417d0d41 100644 --- a/drivers/video/broadsheetfb.c +++ b/drivers/video/broadsheetfb.c @@ -1211,7 +1211,7 @@ static int __devexit broadsheetfb_remove(struct platform_device *dev) static struct platform_driver broadsheetfb_driver = { .probe = broadsheetfb_probe, - .remove = broadsheetfb_remove, + .remove = __devexit_p(broadsheetfb_remove), .driver = { .owner = THIS_MODULE, .name = "broadsheetfb", diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index c2d11fef114b..e2c96d01d8f5 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -224,5 +224,19 @@ config FONT_10x18 big letters. It fits between the sun 12x22 and the normal 8x16 font. If other fonts are too big or too small for you, say Y, otherwise say N. +config FONT_AUTOSELECT + def_bool y + depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE || STI_CONSOLE || USB_SISUSBVGA_CON + depends on !FONT_8x8 + depends on !FONT_6x11 + depends on !FONT_7x14 + depends on !FONT_PEARL_8x8 + depends on !FONT_ACORN_8x8 + depends on !FONT_MINI_4x6 + depends on !FONT_SUN8x16 + depends on !FONT_SUN12x22 + depends on !FONT_10x18 + select FONT_8x16 + endmenu diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c index ab0a8e527333..85e4f44bfa61 100644 --- a/drivers/video/mbx/mbxfb.c +++ b/drivers/video/mbx/mbxfb.c @@ -1045,7 +1045,7 @@ static int __devexit mbxfb_remove(struct platform_device *dev) static struct platform_driver mbxfb_driver = { .probe = mbxfb_probe, - .remove = mbxfb_remove, + .remove = __devexit_p(mbxfb_remove), .suspend = mbxfb_suspend, .resume = mbxfb_resume, .driver = { diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c index 2ce9992f403b..901576eb5a84 100644 --- a/drivers/video/omap2/displays/panel-taal.c +++ b/drivers/video/omap2/displays/panel-taal.c @@ -526,7 +526,7 @@ static ssize_t taal_num_errors_show(struct device *dev, { struct omap_dss_device *dssdev = to_dss_device(dev); struct taal_data *td = dev_get_drvdata(&dssdev->dev); - u8 errors; + u8 errors = 0; int r; mutex_lock(&td->lock); diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c index 72ded9cd2cb0..58bd9c27369d 100644 --- a/drivers/video/omap2/dss/core.c +++ b/drivers/video/omap2/dss/core.c @@ -32,6 +32,7 @@ #include #include #include +#include #include