Kernel/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-12-28 16:56:26 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

gpio: mmio: do not calculate bgpio_bits via "ngpios"

Browse Source 
bgpio_bits must be aligned with the data bus width. For example, on a
32 bit big endian system and we only have 16 GPIOs. If we only assume
bgpio_bits=16 we can never control the GPIO because the base address
is the lowest address.

low address                          high address
-------------------------------------------------
|   byte3   |   byte2   |   byte1   |   byte0   |
-------------------------------------------------
|    NaN    |    NaN    |  gpio8-15 |  gpio0-7  |
-------------------------------------------------

Fixes: 55b2395e4e ("gpio: mmio: handle "ngpios" properly in bgpio_init()")
Fixes: https://github.com/openwrt/openwrt/issues/15739
Reported-by: Mark Mentovai <mark@mentovai.com>
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Suggested-By: Mark Mentovai <mark@mentovai.com>
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Lóránd Horváth <lorand.horvath82@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/TYCP286MB089577B47D70F0AB25ABA6F5BCD52@TYCP286MB0895.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This commit is contained in:
Shiji Yang 2024-06-25 09:19:49 +08:00 committed by Bartosz Golaszewski
parent 3645ffaf2b
commit f07798d7bb
1 changed files with 0 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/gpio/gpio-mmio.c
View File

@ -619,8 +619,6 @@ int bgpio_init(struct gpio_chip *gc, struct device *dev,
ret = gpiochip_get_ngpios(gc, dev);
if (ret)
gc->ngpio = gc->bgpio_bits;
else
gc->bgpio_bits = roundup_pow_of_two(round_up(gc->ngpio, 8));
ret = bgpio_setup_io(gc, dat, set, clr, flags);
if (ret)