[ Upstream commit b4a2496c17 ]
The register of GPIO interrupt status is masked before MAC IRQ
is enabled. This is because of hardware deficiency. So manually
clear the interrupt status before using them. Otherwise, GPIO
interrupts will never be reported again. There is a workaround for
clearing interrupts to set GPIO EOI in txgbe_up_complete().
Fixes: aefd013624 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20240301092956.18544-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e71862a20 ]
GPIO EOI is not set to clear interrupt status after handling the
interrupt. It should be done in irq_chip->irq_ack, but this function
is not called in handle_nested_irq(). So executing function
txgbe_gpio_irq_ack() manually in txgbe_gpio_irq_handler().
Fixes: aefd013624 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20240301092956.18544-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73dfe970c0 ]
For drivers making use of of_pwm_single_xlate() (i.e. those that don't
pass a hwpwm index) and also don't pass flags, setting period was
wrongly skipped. This affects the pwm-pxa and ti-sn65dsi86 drivers.
Reported-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/D05IVTPYH35N.2CLDG6LSILRSN@matfyz.cz
Fixes: 40ade0c2e7 ("pwm: Let the of_xlate callbacks accept references without period")
Tested-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240329103544.545290-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3a640cca9 ]
If we get a request with IOSQE_ASYNC set, then we first run the prep
async handlers. But if we then fail setting it up and want to post
a CQE with -EINVAL, we use ->done_io. This was previously guarded with
REQ_F_PARTIAL_IO, and the normal setup handlers do set it up before any
potential errors, but we need to cover the async setup too.
Fixes: 9817ad8589 ("io_uring/net: remove dependency on REQ_F_PARTIAL_IO for sr->done_io")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e828dc60e ]
Since commit a36e185e8c
("udp: Handle ICMP errors for tunnels with same destination port on both endpoints")
UDP's handling of ICMP errors has allowed for UDP-encap tunnels to
determine socket associations in scenarios where the UDP hash lookup
could not.
Subsequently, commit d26796ae58
("udp: check udp sock encap_type in __udp_lib_err")
subtly tweaked the approach such that UDP ICMP error handling would be
skipped for any UDP socket which has encapsulation enabled.
In the case of L2TP tunnel sockets using UDP-encap, this latter
modification effectively broke ICMP error reporting for the L2TP
control plane.
To a degree this isn't catastrophic inasmuch as the L2TP control
protocol defines a reliable transport on top of the underlying packet
switching network which will eventually detect errors and time out.
However, paying attention to the ICMP error reporting allows for more
timely detection of errors in L2TP userspace, and aids in debugging
connectivity issues.
Reinstate ICMP error handling for UDP encap L2TP tunnels:
* implement struct udp_tunnel_sock_cfg .encap_err_rcv in order to allow
the L2TP code to handle ICMP errors;
* only implement error-handling for tunnels which have a managed
socket: unmanaged tunnels using a kernel socket have no userspace to
report errors back to;
* flag the error on the socket, which allows for userspace to get an
error such as -ECONNREFUSED back from sendmsg/recvmsg;
* pass the error into ip[v6]_icmp_error() which allows for userspace to
get extended error information via. MSG_ERRQUEUE.
Fixes: d26796ae58 ("udp: check udp sock encap_type in __udp_lib_err")
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Link: https://lore.kernel.org/r/20240513172248.623261-1-tparkin@katalix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d3c641495 ]
When VLAN tag strip is changed to enable or disable, the hardware requires
the Rx ring to be in a disabled state, otherwise the feature cannot be
changed.
Fixes: f3b03c655f ("net: wangxun: Implement vlan add and kill functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aefd013624 ]
In the current interrupt controller, the MAC interrupt acts as the
parent interrupt in the GPIO IRQ chip. But when the number of Rx/Tx
ring changes, the PCI IRQ vector needs to be reallocated. Then this
interrupt controller would be corrupted. So use irq_domain structure
to avoid the above problem.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 1d3c641495 ("net: txgbe: fix to control VLAN strip")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63aabc3ef1 ]
In order to change the interrupt response structure, there will be a
lot of code added next. Move these interrupt codes to a new file, to
make the codes cleaner.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 1d3c641495 ("net: txgbe: fix to control VLAN strip")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac71ab7816 ]
Hardware requires VLAN CTAG and STAG configuration always matches. And
whether VLAN CTAG or STAG changes, the configuration needs to be changed
as well.
Fixes: 6670f1ece2 ("net: txgbe: Add netdev features support")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68067f065e ]
Fix the issue where some Rx features cannot be changed.
When using ethtool -K to turn off rx offload, it returns error and
displays "Could not change any device features". And netdev->features
is not assigned a new value to actually configure the hardware.
Fixes: 6dbedcffcf ("net: libwx: Implement xx_set_features ops")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49217ea147 ]
In the cgroup v2 CPU subsystem, assuming we have a
cgroup named 'test', and we set cpu.max and cpu.max.burst:
# echo 1000000 > /sys/fs/cgroup/test/cpu.max
# echo 1000000 > /sys/fs/cgroup/test/cpu.max.burst
then we check cpu.max and cpu.max.burst:
# cat /sys/fs/cgroup/test/cpu.max
1000000 100000
# cat /sys/fs/cgroup/test/cpu.max.burst
1000000
Next we set cpu.max again and check cpu.max and
cpu.max.burst:
# echo 2000000 > /sys/fs/cgroup/test/cpu.max
# cat /sys/fs/cgroup/test/cpu.max
2000000 100000
# cat /sys/fs/cgroup/test/cpu.max.burst
1000
... we find that the cpu.max.burst value changed unexpectedly.
In cpu_max_write(), the unit of the burst value returned
by tg_get_cfs_burst() is microseconds, while in cpu_max_write(),
the burst unit used for calculation should be nanoseconds,
which leads to the bug.
To fix it, get the burst value directly from tg->cfs_bandwidth.burst.
Fixes: f4183717b3 ("sched/fair: Introduce the burstable CFS controller")
Reported-by: Qixin Liao <liaoqixin@huawei.com>
Signed-off-by: Cheng Yu <serein.chengyu@huawei.com>
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240424132438.514720-1-serein.chengyu@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1fd0b9d75 ]
Change relax_domain_level checks so that it would be possible
to include or exclude all domains from newidle balancing.
This matches the behavior described in the documentation:
-1 no request. use system default or follow request of others.
0 no search.
1 search siblings (hyperthreads in a core).
"2" enables levels 0 and 1, level_max excludes the last (level_max)
level, and level_max+1 includes all levels.
Fixes: 1d3504fcf5 ("sched, cpuset: customize sched domains, core")
Signed-off-by: Vitalii Bursov <vitaly@bursov.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/bd6de28e80073c79466ec6401cdeae78f0d4423d.1714488502.git.vitaly@bursov.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 581073f626 ]
trafgen performance considerably sank on hosts with many cores
after the blamed commit.
packet_read_pending() is very expensive, and calling it
in af_packet fast path defeats Daniel intent in commit
b013840810 ("packet: use percpu mmap tx frame pending refcount")
tpacket_destruct_skb() makes room for one packet, we can immediately
wakeup a producer, no need to completely drain the tx ring.
Fixes: 89ed5b5190 ("af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240515163358.4105915-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67708158e7 ]
Disabling tcp-data-split on idpf silently fails:
# ethtool -G $NETDEV tcp-data-split off
# ethtool -g $NETDEV | grep 'TCP data split'
TCP data split: on
But it works if you also change 'tx' or 'rx':
# ethtool -G $NETDEV tcp-data-split off tx 256
# ethtool -g $NETDEV | grep 'TCP data split'
TCP data split: off
The bug is in idpf_set_ringparam, where it takes a shortcut out if the
TX and RX sizes are not changing. Fix it by checking also if the
tcp-data-split setting remains unchanged. Only then can the soft reset
be skipped.
Fixes: 9b1aa3ef23 ("idpf: add get/set for Ethtool's header split ringparam")
Reported-by: Xu Du <xudu@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-36182
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240515092414.158079-1-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83e9394279 ]
There is no need to add the name to ns_list again if the netns already
recoreded.
Fixes: 25ae948b44 ("selftests/net: add lib.sh")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd76e5ccc4 ]
The qrtr protocol core logic and the qrtr nameservice are combined into
a single module. Neither the core logic or nameservice provide much
functionality by themselves; combining the two into a single module also
prevents any possible issues that may stem from client modules loading
inbetween qrtr and the ns.
Creating a socket takes two references to the module that owns the
socket protocol. Since the ns needs to create the control socket, this
creates a scenario where there are always two references to the qrtr
module. This prevents the execution of 'rmmod' for qrtr.
To resolve this, forcefully put the module refcount for the socket
opened by the nameservice.
Fixes: a365023a76 ("net: qrtr: combine nameservice into main module")
Reported-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06080ea230 ]
When running the bridge IGMP/MLD selftests on debug kernels we can get
spurious errors when setting up the IGMP/MLD exclude timeout tests
because the membership interval is just 3 seconds and the setup has 2
seconds of sleep plus various validations, the one second that is left
is not enough. Increase the membership interval from 3 to 5 seconds to
make room for the setup validation and 2 seconds of sleep.
Fixes: 34d7ecb3d4 ("selftests: net: bridge: update IGMP/MLD membership interval value")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fe51b45c5 ]
Commit ddb5cdbafa ("kbuild: generate KSYMTAB entries by modpost")
forget drop the .export_symbol section from the final modules.
Fixes: ddb5cdbafa ("kbuild: generate KSYMTAB entries by modpost")
Signed-off-by: Wang Yao <wangyao@lemote.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd125a0840 ]
When the ABI was updated to prevent same name w/different args, it
missed an important corner case when fields don't end with a space.
Typically, space is used for fields to help separate them, like
"u8 field1; u8 field2". If no spaces are used, like
"u8 field1;u8 field2", then the parsing works for the first time.
However, the match check fails on a subsequent register, leading to
confusion.
This is because the match check uses argv_split() and assumes that all
fields will be split upon the space. When spaces are used, we get back
{ "u8", "field1;" }, without spaces we get back { "u8", "field1;u8" }.
This causes a mismatch, and the user program gets back -EADDRINUSE.
Add a method to detect this case before calling argv_split(). If found
force a space after the field separator character ';'. This ensures all
cases work properly for matching.
With this fix, the following are all treated as matching:
u8 field1;u8 field2
u8 field1; u8 field2
u8 field1;\tu8 field2
u8 field1;\nu8 field2
Link: https://lore.kernel.org/linux-trace-kernel/20240423162338.292-2-beaub@linux.microsoft.com
Fixes: ba470eebc2 ("tracing/user_events: Prevent same name but different args event")
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e953de9e9 ]
The current code for finding and deleting events assumes that there will
never be cases when user_events are registered with the same name, but
different formats. Scenarios exist where programs want to use the same
name but have different formats. An example is multiple versions of a
program running side-by-side using the same event name, but with updated
formats in each version.
This change does not yet allow for multi-format events. If user_events
are registered with the same name but different arguments the programs
see the same return values as before. This change simply makes it
possible to easily accommodate for this.
Update find_user_event() to take in argument parameters and register
flags to accommodate future multi-format event scenarios. Have find
validate argument matching and return error pointers to cover when
an existing event has the same name but different format. Update
callers to handle error pointer logic.
Move delete_user_event() to use hash walking directly now that
find_user_event() has changed. Delete all events found that match the
register name, stop if an error occurs and report back to the user.
Update user_fields_match() to cover list_empty() scenarios now that
find_user_event() uses it directly. This makes the logic consistent
across several callsites.
Link: https://lore.kernel.org/linux-trace-kernel/20240222001807.1463-2-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: bd125a0840 ("tracing/user_events: Fix non-spaced field matching")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49ca2b2ef3 ]
Truncate the device name to store IPoIB VLAN name.
[leonro@5b4e8fba4ddd kernel]$ make -s -j 20 allmodconfig
[leonro@5b4e8fba4ddd kernel]$ make -s -j 20 W=1 drivers/infiniband/ulp/ipoib/
drivers/infiniband/ulp/ipoib/ipoib_vlan.c: In function ‘ipoib_vlan_add’:
drivers/infiniband/ulp/ipoib/ipoib_vlan.c:187:52: error: ‘%04x’
directive output may be truncated writing 4 bytes into a region of size
between 0 and 15 [-Werror=format-truncation=]
187 | snprintf(intf_name, sizeof(intf_name), "%s.%04x",
| ^~~~
drivers/infiniband/ulp/ipoib/ipoib_vlan.c:187:48: note: directive
argument in the range [0, 65535]
187 | snprintf(intf_name, sizeof(intf_name), "%s.%04x",
| ^~~~~~~~~
drivers/infiniband/ulp/ipoib/ipoib_vlan.c:187:9: note: ‘snprintf’ output
between 6 and 21 bytes into a destination of size 16
187 | snprintf(intf_name, sizeof(intf_name), "%s.%04x",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
188 | ppriv->dev->name, pkey);
| ~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:244: drivers/infiniband/ulp/ipoib/ipoib_vlan.o] Error 1
make[6]: *** Waiting for unfinished jobs....
Fixes: 9baa0b0364 ("IB/ipoib: Add rtnl_link_ops support")
Link: https://lore.kernel.org/r/e9d3e1fef69df4c9beaf402cc3ac342bad680791.1715240029.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bafa6b4d95 ]
Dan Carpenter says:
> Commit 5866efa8cb ("SUNRPC: Fix svcauth_gss_proxy_init()") from Oct
> 24, 2019 (linux-next), leads to the following Smatch static checker
> warning:
>
> net/sunrpc/auth_gss/svcauth_gss.c:1039 gss_free_in_token_pages()
> warn: iterator 'i' not incremented
>
> net/sunrpc/auth_gss/svcauth_gss.c
> 1034 static void gss_free_in_token_pages(struct gssp_in_token *in_token)
> 1035 {
> 1036 u32 inlen;
> 1037 int i;
> 1038
> --> 1039 i = 0;
> 1040 inlen = in_token->page_len;
> 1041 while (inlen) {
> 1042 if (in_token->pages[i])
> 1043 put_page(in_token->pages[i]);
> ^
> This puts page zero over and over.
>
> 1044 inlen -= inlen > PAGE_SIZE ? PAGE_SIZE : inlen;
> 1045 }
> 1046
> 1047 kfree(in_token->pages);
> 1048 in_token->pages = NULL;
> 1049 }
Based on the way that the ->pages[] array is constructed in
gss_read_proxy_verf(), we know that once the loop encounters a NULL
page pointer, the remaining array elements must also be NULL.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Fixes: 5866efa8cb ("SUNRPC: Fix svcauth_gss_proxy_init()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf7385cb26 ]
In of_modalias(), if the buffer happens to be too small even for the 1st
snprintf() call, the len parameter will become negative and str parameter
(if not NULL initially) will point beyond the buffer's end. Add the buffer
overflow check after the 1st snprintf() call and fix such check after the
strlen() call (accounting for the terminating NUL char).
Fixes: bc575064d6 ("of/device: use of_property_for_each_string to parse compatible strings")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/bbfc6be0-c687-62b6-d015-5141b93f313e@omp.ru
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07fb0a76bb ]
CONFIG_SM_GCC_8650 depends on ARM64 but it is selected by
CONFIG_SM_GPUCC_8650, which can be selected on ARM, resulting in a
Kconfig warning.
WARNING: unmet direct dependencies detected for SM_GCC_8650
Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n])
Selected by [y]:
- SM_GPUCC_8650 [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y]
Add the same dependencies to CONFIG_SM_GPUCC_8650 to resolve the
warning.
Fixes: 8676fd4f38 ("clk: qcom: add the SM8650 GPU Clock Controller driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240318-fix-some-qcom-kconfig-deps-v1-2-ea0773e3df5a@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e00f2540a5 ]
CONFIG_SC_GCC_8280XP depends on ARM64 but it is selected by
CONFIG_SC_CAMCC_8280XP, which can be selected on ARM, resulting in a
Kconfig warning.
WARNING: unmet direct dependencies detected for SC_GCC_8280XP
Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n])
Selected by [y]:
- SC_CAMCC_8280XP [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y]
Add the same dependencies to CONFIG_SC_CAMCC_8280XP to resolve the
warning.
Fixes: ff93872a9c ("clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240318-fix-some-qcom-kconfig-deps-v1-1-ea0773e3df5a@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df0b5afc62 ]
__filemap_get_folio() with FGP_WRITEBEGIN parameter has already wait
for stable folio, so remove the redundant folio_wait_stable() in
ext4_da_write_begin(), it was left over from the commit cc883236b7
("ext4: drop unnecessary journal handle in delalloc write") that
removed the retry getting page logic.
Fixes: cc883236b7 ("ext4: drop unnecessary journal handle in delalloc write")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240419023005.2719050-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f4830abd2 ]
Smatch complains "err" can be uninitialized in the caller.
fs/ext4/indirect.c:349 ext4_alloc_branch()
error: uninitialized symbol 'err'.
Set the error to zero on the success path.
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/363a4673-0fb8-4adf-b4fb-90a499077276@moroto.mountain
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0770249b90 ]
When CONFIG_NFSD_LEGACY_CLIENT_TRACKING is not set, the virtual file
/proc/fs/nfsd/nfsv4recoverydir
is created but responds EINVAL to any access.
This is not useful, is somewhat surprising, and it causes ltp to
complain.
The only known user of this file is in nfs-utils, which handles
non-existence and read-failure equally well. So there is nothing to
gain from leaving the file present but inaccessible.
So this patch removes the file when its content is not available - i.e.
when that config option is not selected.
Also remove the #ifdef which hides some of the enum values when
CONFIG_NFSD_V$ not selection. simple_fill_super() quietly ignores array
entries that are not present, so having slots in the array that don't
get used is perfectly acceptable. So there is no value in this #ifdef.
Reported-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: 74fd48739d ("nfsd: new Kconfig option for legacy client tracking")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a576f36971 ]
since vs_proc pointer is dereferenced before getting it's address there's
no need to check for NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8e5b67731d ("SUNRPC: Add a callback to initialise server requests")
Signed-off-by: Aleksandr Aprelkov <aaprelkov@usergate.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d6586008f ]
Patch series "mm: follow_pte() improvements and acrn follow_pte() fixes".
Patch #1 fixes a bunch of issues I spotted in the acrn driver. It
compiles, that's all I know. I'll appreciate some review and testing from
acrn folks.
Patch #2+#3 improve follow_pte(), passing a VMA instead of the MM, adding
more sanity checks, and improving the documentation. Gave it a quick test
on x86-64 using VM_PAT that ends up using follow_pte().
This patch (of 3):
We currently miss handling various cases, resulting in a dangerous
follow_pte() (previously follow_pfn()) usage.
(1) We're not checking PTE write permissions.
Maybe we should simply always require pte_write() like we do for
pin_user_pages_fast(FOLL_WRITE)? Hard to tell, so let's check for
ACRN_MEM_ACCESS_WRITE for now.
(2) We're not rejecting refcounted pages.
As we are not using MMU notifiers, messing with refcounted pages is
dangerous and can result in use-after-free. Let's make sure to reject them.
(3) We are only looking at the first PTE of a bigger range.
We only lookup a single PTE, but memmap->len may span a larger area.
Let's loop over all involved PTEs and make sure the PFN range is
actually contiguous. Reject everything else: it couldn't have worked
either way, and rather made use access PFNs we shouldn't be accessing.
Link: https://lkml.kernel.org/r/20240410155527.474777-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240410155527.474777-2-david@redhat.com
Fixes: 8a6e85f75a ("virt: acrn: obtain pa from VMA with PFNMAP flag")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Fei Li <fei1.li@intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Yonghua Huang <yonghua.huang@intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b265da7ea ]
Patch series "remove follow_pfn".
This series open codes follow_pfn in the only remaining caller, although
the code there remains questionable. It then also moves follow_phys into
the only user and simplifies it a bit.
This patch (of 3):
Switch from follow_pfn to follow_pte so that we can get rid of follow_pfn.
Note that this doesn't fix any of the pre-existing raciness and lack of
permission checking in the code.
Link: https://lkml.kernel.org/r/20240324234542.2038726-1-hch@lst.de
Link: https://lkml.kernel.org/r/20240324234542.2038726-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fei Li <fei1.li@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 3d6586008f ("drivers/virt/acrn: fix PFNMAP PTE checks in acrn_vm_ram_map()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60a7ac0b8b ]
Use struct mana_ib_queue and its helpers for CQs
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1711483688-24358-3-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: f79edef79b ("RDMA/mana_ib: boundary check before installing cq callbacks")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46f5be7cd4 ]
Intoduce helpers to work with mana ib queues (struct mana_ib_queue).
A queue always consists of umem, gdma_region, and id.
A queue can become a WQ or a CQ.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1711483688-24358-2-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: f79edef79b ("RDMA/mana_ib: boundary check before installing cq callbacks")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35a1f12f0c ]
A user with minimum journal size (1024 blocks these days) complained
about the following error triggered by generic/697 test in
ext4_tmpfile():
run fstests generic/697 at 2024-02-28 05:34:46
JBD2: vfstest wants too many credits credits:260 rsv_credits:0 max:256
EXT4-fs error (device loop0) in __ext4_new_inode:1083: error 28
Indeed the credit estimate in ext4_tmpfile() is huge.
EXT4_MAXQUOTAS_INIT_BLOCKS() is 219, then 10 credits from ext4_tmpfile()
itself and then ext4_xattr_credits_for_new_inode() adds more credits
needed for security attributes and ACLs. Now the
EXT4_MAXQUOTAS_INIT_BLOCKS() is in fact unnecessary because we've
already initialized quotas with dquot_init() shortly before and so
EXT4_MAXQUOTAS_TRANS_BLOCKS() is enough (which boils down to 3 credits).
Fixes: af51a2ac36 ("ext4: ->tmpfile() support")
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Luis Henriques <lhenriques@suse.de>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Link: https://lore.kernel.org/r/20240307115320.28949-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b800026434 ]
The x86 instruction decoder is used not only for decoding kernel
instructions. It is also used by perf uprobes (user space probes) and by
perf tools Intel Processor Trace decoding. Consequently, it needs to
support instructions executed by user space also.
Intel Architecture Instruction Set Extensions and Future Features manual
number 319433-044 of May 2021, documented VEX versions of instructions
VPDPBUSD, VPDPBUSDS, VPDPWSSD and VPDPWSSDS, but the opcode map has them
listed as EVEX only.
Remove EVEX-only (ev) annotation from instructions VPDPBUSD, VPDPBUSDS,
VPDPWSSD and VPDPWSSDS, which allows them to be decoded with either a VEX
or EVEX prefix.
Fixes: 0153d98f2d ("x86/insn: Add misc instructions to x86 instruction decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-4-adrian.hunter@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59162e0c11 ]
The x86 instruction decoder is used not only for decoding kernel
instructions. It is also used by perf uprobes (user space probes) and by
perf tools Intel Processor Trace decoding. Consequently, it needs to
support instructions executed by user space also.
Opcode 0x68 PUSH instruction is currently defined as 64-bit operand size
only i.e. (d64). That was based on Intel SDM Opcode Map. However that is
contradicted by the Instruction Set Reference section for PUSH in the
same manual.
Remove 64-bit operand size only annotation from opcode 0x68 PUSH
instruction.
Example:
$ cat pushw.s
.global _start
.text
_start:
pushw $0x1234
mov $0x1,%eax # system call number (sys_exit)
int $0x80
$ as -o pushw.o pushw.s
$ ld -s -o pushw pushw.o
$ objdump -d pushw | tail -4
0000000000401000 <.text>:
401000: 66 68 34 12 pushw $0x1234
401004: b8 01 00 00 00 mov $0x1,%eax
401009: cd 80 int $0x80
$ perf record -e intel_pt//u ./pushw
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB perf.data ]
Before:
$ perf script --insn-trace=disasm
Warning:
1 instruction trace errors
pushw 10349 [000] 10586.869237014: 401000 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) pushw $0x1234
pushw 10349 [000] 10586.869237014: 401006 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb %al, (%rax)
pushw 10349 [000] 10586.869237014: 401008 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb %cl, %ch
pushw 10349 [000] 10586.869237014: 40100a [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb $0x2e, (%rax)
instruction trace error type 1 time 10586.869237224 cpu 0 pid 10349 tid 10349 ip 0x40100d code 6: Trace doesn't match instruction
After:
$ perf script --insn-trace=disasm
pushw 10349 [000] 10586.869237014: 401000 [unknown] (./pushw) pushw $0x1234
pushw 10349 [000] 10586.869237014: 401004 [unknown] (./pushw) movl $1, %eax
Fixes: eb13296cfa ("x86: Instruction decoder API")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-3-adrian.hunter@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 615a292ee4 ]
On SM8650 DisplayPort link clocks use frequency tables inherited from
the vendor kernel, it is not applicable in the upstream kernel. Drop
frequency tables and use clk_byte2_ops for those clocks.
This fixes frequency selection in the OPP core (which otherwise attempts
to use invalid 810 KHz as DP link rate), also fixing the following
message:
msm-dp-display af54000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22
Fixes: 9e939f0083 ("clk: qcom: add the SM8650 Display Clock Controller driver")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-4-b44038f3fa96@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e90b5139da ]
On SM8550 DisplayPort link clocks use frequency tables inherited from
the vendor kernel, it is not applicable in the upstream kernel. Drop
frequency tables and use clk_byte2_ops for those clocks.
This fixes frequency selection in the OPP core (which otherwise attempts
to use invalid 810 KHz as DP link rate), also fixing the following
message:
msm-dp-display ae90000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22
Fixes: 90114ca114 ("clk: qcom: add SM8550 DISPCC driver")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-3-b44038f3fa96@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
