[ Upstream commit 05417aa9c0 ]
Some usb drivers set small skb->truesize and break
core networking stacks.
In this patch, I removed one of the skb->truesize override.
I also replaced one skb_clone() by an allocation of a fresh
and small skb, to get minimally sized skbs, like we did
in commit 1e2c611723 ("net: cdc_ncm: reduce skb truesize
in rx path") and 4ce62d5b2f ("net: usb: ax88179_178a:
stop lying about skb->truesize")
Fixes: c9b37458e9 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240506143939.3673865-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9aad6e45c4 ]
Some usb drivers try to set small skb->truesize and break
core networking stacks.
I replace one skb_clone() by an allocation of a fresh
and small skb, to get minimally sized skbs, like we did
in commit 1e2c611723 ("net: cdc_ncm: reduce skb truesize
in rx path") and 4ce62d5b2f ("net: usb: ax88179_178a:
stop lying about skb->truesize")
Fixes: 361459cd96 ("net: usb: aqc111: Implement RX data path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240506135546.3641185-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 077e3e3bc8 ]
Resume or suspend each sensor device based on the num_hid_devices.
Therefore, add a check to handle the special case where no sensors are
present.
Fixes: 93ce5e0231 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d60eabb82 ]
This loop is supposed to copy the mac address to cmd->addr but the
i++ increment is missing so it copies everything to cmd->addr[0] and
only the last address is recorded.
Fixes: 22bedad3ce ("net: convert multicast list to list_head")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/b788be9a-15f5-4cca-a3fe-79df4c8ce7b2@moroto.mountain
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9f67e5adc ]
For configurations that have the kconfig option NUMA_KEEP_MEMINFO
disabled, numa_fill_memblks() only returns with NUMA_NO_MEMBLK (-1).
SRAT lookup fails then because an existing SRAT memory range cannot be
found for a CFMWS address range. This causes the addition of a
duplicate numa_memblk with a different node id and a subsequent page
fault and kernel crash during boot.
Fix this by making numa_fill_memblks() always available regardless of
NUMA_KEEP_MEMINFO.
As Dan suggested, the fix is implemented to remove numa_fill_memblks()
from sparsemem.h and alos using __weak for the function.
Note that the issue was initially introduced with [1]. But since
phys_to_target_node() was originally used that returned the valid node
0, an additional numa_memblk was not added. Though, the node id was
wrong too, a message is seen then in the logs:
kernel/numa.c: pr_info_once("Unknown target node for memory at 0x%llx, assuming node 0\n",
[1] commit fd49f99c18 ("ACPI: NUMA: Add a node and memblk for each
CFMWS not in SRAT")
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/all/66271b0072317_69102944c@dwillia2-xfh.jf.intel.com.notmuch/
Fixes: 8f10046799 ("ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f45fe2ea3 ]
The generic_handle_domain_irq() function calls irq_resolve_mapping().
Thus delete a duplicative irq_find_mapping() call
so that a stack trace and an RCU stall will be avoided.
Fixes: c4f8457d17 ("gpio: nuvoton: Add Nuvoton NPCM sgpio driver")
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240506064244.1645922-1-JJLIU0@nuvoton.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 998d09c5ef ]
DebugFS output for fw_resource_count shows:
estimate exchange used[0] high water limit [1945] n estimate iocb2 used [0] high water limit [5141]
estimate exchange2 used[0] high water limit [1945]
Which shows incorrect display due to missing newline in seq_print().
[mkp: fix checkpatch warning about space before newline]
Fixes: 5f63a163ed ("scsi: qla2xxx: Fix exchange oversubscription for management commands")
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20240426020056.3639406-1-himanshu.madhani@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0184a375e ]
Currently, we allocate a count-sized kernel buffer and copy count from
userspace to that buffer. Later, we use kstrtouint on this buffer but we
don't ensure that the string is terminated inside the buffer, this can
lead to OOB read when using kstrtouint. Fix this issue by using
memdup_user_nul instead of memdup_user.
Fixes: 61d8658b4a ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-4-f1f1b53a10f4@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13d0cecb46 ]
Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from
userspace to that buffer. Later, we use sscanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using sscanf. Fix this issue by using memdup_user_nul instead
of memdup_user.
Fixes: 9f30b67475 ("bfa: replace 2 kzalloc/copy_from_user by memdup_user")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-3-f1f1b53a10f4@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6baa452402 ]
Add a check for the return value of pci_alloc_irq_vectors() and return
error if it fails.
[jkosina@suse.com: reworded changelog based on Srinivas' suggestion]
Fixes: 74fbc7d371 ("HID: intel-ish-hid: add MSI interrupt support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e549b39a0a ]
Cast operation has a higher precedence than addition. The code here
wants to zero the 2nd half of the 64-bit metadata, but due to a pointer
arithmetic mistake, it writes the zero at offset 16 instead.
Just adding parentheses around "data + 4" would fix this, but I think
this will be slightly better readable with array syntax.
I was unable to test this with tools/testing/selftests/bpf/vmtest.sh,
because my glibc is newer than glibc in the provided VM image.
So I just checked the difference in the compiled code.
objdump -S tools/testing/selftests/bpf/xdp_do_redirect.test.o:
- *((__u32 *)data) = 0x42; /* metadata test value */
+ ((__u32 *)data)[0] = 0x42; /* metadata test value */
be7: 48 8d 85 30 fc ff ff lea -0x3d0(%rbp),%rax
bee: c7 00 42 00 00 00 movl $0x42,(%rax)
- *((__u32 *)data + 4) = 0;
+ ((__u32 *)data)[1] = 0;
bf4: 48 8d 85 30 fc ff ff lea -0x3d0(%rbp),%rax
- bfb: 48 83 c0 10 add $0x10,%rax
+ bfb: 48 83 c0 04 add $0x4,%rax
bff: c7 00 00 00 00 00 movl $0x0,(%rax)
Fixes: 5640b6d894 ("selftests/bpf: fix "metadata marker" getting overwritten by the netstack")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20240506145023.214248-1-mschmidt@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5496b9b77d ]
Commit c72a870926 added a mutex to prevent kunit tests from running
concurrently. Unfortunately that mutex gets locked during module load
regardless of whether the module actually has any kunit tests. This
causes a problem for kunit tests that might need to load other kernel
modules (e.g. gss_krb5_test loading the camellia module).
So check to see if there are actually any tests to run before locking
the kunit_run_lock mutex.
Fixes: c72a870926 ("kunit: add ability to run tests after boot using debugfs")
Reported-by: Nico Pache <npache@redhat.com>
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fabd480b72 ]
kunit_init_device() should unregister the device on bus register error,
but mistakenly it tries to unregister the bus.
Unregister the device instead of the bus.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Fixes: d03c720e03 ("kunit: Add APIs for managing devices")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8aa1b98ce ]
There is a race condition when a kthread finishes after the deadline and
before the call to kthread_stop(), which may lead to use after free.
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Fixes: adf5054570 ("kunit: fix UAF when run kfence test case test_gfpzero")
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20240408074625.65017-3-mic@digikod.net
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4e6fbd245 ]
Align the behavior for gcc and clang builds by interpreting unset
`ARCH` and `CROSS_COMPILE` variables in `LLVM` builds as a sign that the
user wants to build for the host architecture.
This patch preserves the properties that setting the `ARCH` variable to an
unknown value will trigger an error that complains about insufficient
information, and that a set `CROSS_COMPILE` variable will override the
target triple that is determined based on presence/absence of `ARCH`.
When compiling with clang, i.e., `LLVM` is set, an unset `ARCH` variable in
combination with an unset `CROSS_COMPILE` variable, i.e., compiling for
the host architecture, leads to compilation failures since `lib.mk` can
not determine the clang target triple. In this case, the following error
message is displayed for each subsystem that does not set `ARCH` in its
own Makefile before including `lib.mk` (lines wrapped at 75 chrs):
make[1]: Entering directory '/mnt/build/linux/tools/testing/selftests/
sysctl'
../lib.mk:33: *** Specify CROSS_COMPILE or add '--target=' option to
lib.mk. Stop.
make[1]: Leaving directory '/mnt/build/linux/tools/testing/selftests/
sysctl'
In the same scenario a gcc build would default to the host architecture,
i.e., it would use plain `gcc`.
Fixes: 795285ef24 ("selftests: Fix clang cross compilation")
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8171aa4ca ]
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the following error occurs:
clang: error: cannot specify -o when generating multiple output files
This is because clang, unlike gcc, won't accept invocations of this
form:
clang file1.c header2.h
Fix this by using selftests/lib.mk facilities for tracking local header
file dependencies: add them to LOCAL_HDRS, leaving only the .c files to
be passed to the compiler.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Fixes: 8e289f4542 ("selftests/resctrl: Add resctrl.h into build deps")
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 019baf635e ]
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the following error occurs:
clang: error: cannot specify -o when generating multiple output files
This is because clang, unlike gcc, won't accept invocations of this
form:
clang file1.c header2.h
While trying to fix this, I noticed that:
a) selftests/lib.mk already avoids the problem, and
b) The binderfs Makefile indavertently bypasses the selftests/lib.mk
build system, and quitely uses Make's implicit build rules for .c files
instead.
The Makefile attempts to set up both a dependency and a source file,
neither of which was needed, because lib.mk is able to automatically
handle both. This line:
binderfs_test: binderfs_test.c
...causes Make's implicit rules to run, which builds binderfs_test
without ever looking at lib.mk.
Fix this by simply deleting the "binderfs_test:" Makefile target and
letting lib.mk handle it instead.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Fixes: 6e29225af9 ("binderfs: port tests to test harness infrastructure")
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit baaf806e46 ]
After enabling packet offload, the TX will be stuck after resume from
WoWLAN mode. And the 8852c gets error messages like
rtw89_8852ce 0000:04:00.0: No busy txwd pages available
rtw89_8852ce 0000:04:00.0: queue 0 txwd 100 is not idle
rtw89_8852ce 0000:04:00.0: queue 0 txwd 101 is not idle
rtw89_8852ce 0000:04:00.0: queue 0 txwd 102 is not idle
rtw89_8852ce 0000:04:00.0: queue 0 txwd 103 is not idle
If suspend/resume many times that firmware will download failed and
disconnection.
To fix these issues, We removed the rtw89_hci_disable_intr() and
rtw89_hci_enable_intr() during rtw89_wow_swap_fw() to prevent add packet
offload can't receive c2h back due to interrupt disable. Only 8852C and
8922A needs to disable interrupt before downloading fw.
Furthermore, we avoid using low power HCI mode on WoWLAN mode, to prevent
interrupt enabled, then get interrupt and calculate RXBD mismatched due to
software RXBD index already reset but hardware RXBD index not yet.
Fixes: 5c12bb66b7 ("wifi: rtw89: refine packet offload flow")
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-3-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 838c7b8f1f ]
Before request->channels[] can be used, request->n_channels must be set.
Additionally, address calculations for memory after the "channels" array
need to be calculated from the allocation base ("request") rather than
via the first "out of bounds" index of "channels", otherwise run-time
bounds checking will throw a warning.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: e3eac9f32e ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://msgid.link/20240424220057.work.819-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ac710a6e8 ]
Set intr1 to 0 in mt7996_irq_tasklet() in order to avoid possible
uninitialized variable usage if wed is not active for hif2.
Fixes: 83eafc9251 ("wifi: mt76: mt7996: add wed tx support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa46bd62c9 ]
Before sending suspend & wow command to FW, its length should be
4-bytes alignd.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66ffcb9aba ]
Fixes issues with scanning and low power output at some rates.
Fixes: f75e4779d2 ("wifi: mt76: mt7996: add txpower setting support")
Signed-off-by: Chad Monroe <chad@monroe.io>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21de5f7226 ]
This flag is needed for the PSE client reset. Fixes watchdog reset issues.
Fixes: c677dda165 ("wifi: mt76: mt7603: improve watchdog reset reliablity")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b473c0e47f ]
Use the correct WMM AC queue instead of the MGMT one to fix potential issues
with aggregation sequence number tracking. Drop non-bufferable packets.
Fixes: fca9615f1a ("mt76: mt7603: fix up hardware queue index for PS filtered packets")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1422ae080b ]
arch/sh/kernel/kprobes.c:52:16: warning: no previous prototype for 'arch_copy_kprobe' [-Wmissing-prototypes]
Although SH kprobes support was only merged in v2.6.28, it missed the
earlier removal of the arch_copy_kprobe() callback in v2.6.15.
Based on the powerpc part of commit 49a2a1b83b ("[PATCH] kprobes:
changed from using spinlock to mutex").
Fixes: d39f545014 ("sh: Add kprobes support.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/717d47a19689cc944fae6e981a1ad7cae1642c89.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 543576ec15 ]
bpf_prog_attach uses attach_type_to_prog_type to enforce proper
attach type for BPF_PROG_TYPE_CGROUP_SKB. link_create uses
bpf_prog_get and relies on bpf_prog_attach_check_attach_type
to properly verify prog_type <> attach_type association.
Add missing attach_type enforcement for the link_create case.
Otherwise, it's currently possible to attach cgroup_skb prog
types to other cgroup hooks.
Fixes: af6eea5743 ("bpf: Implement bpf_link-based cgroup BPF program attachment")
Link: https://lore.kernel.org/bpf/0000000000004792a90615a1dde0@google.com/
Reported-by: syzbot+838346b979830606c854@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240426231621.2716876-2-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32c44e1fa9 ]
While calculating frequency for the given period u64 numbers are
multiplied before division what can lead to overflow in theory so use
secure mul_u64_u64_div_u64() which handles overflow correctly.
Fixes: 329db102a2 ("pwm: meson: make full use of common clock framework")
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: George Stark <gnstark@salutedevices.com>
Link: https://lore.kernel.org/r/20240425171253.2752877-4-gnstark@salutedevices.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e551115ae ]
clk_round_rate() can return not only zero if requested frequency can not
be provided but also negative error code so add check for it too.
Also change type of variable holding clk_round_rate() result from
unsigned long to long. It's safe due to clk_round_rate() returns long.
Fixes: 329db102a2 ("pwm: meson: make full use of common clock framework")
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Signed-off-by: George Stark <gnstark@salutedevices.com>
Link: https://lore.kernel.org/r/20240425171253.2752877-3-gnstark@salutedevices.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b647dcfde1 ]
This prepares the driver for further changes that will make it harder to
determine the pwm_chip from a given meson_pwm. To just not have to do
that, rework meson_pwm_calc(), meson_pwm_enable(), meson_pwm_disable()
and meson_pwm_init_channels() to take a pwm_chip.
Link: https://lore.kernel.org/r/157084e1dd464da0097edba880240868c1c0b27e.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Stable-dep-of: 3e551115ae ("pwm: meson: Add check for error from clk_round_rate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e59267c7a ]
Currently a pwm_chip stores in its struct device *dev member a pointer
to the parent device. Preparing a change that embeds a full struct
device in struct pwm_chip, this accessor function should be used in all
drivers directly accessing chip->dev now. This way struct pwm_chip and
this new function can be changed without having to touch all drivers in
the same change set.
Make use of this function in the framework's core sources.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/cc30090d2f9762bed9854a55612144bccc910781.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Stable-dep-of: 3e551115ae ("pwm: meson: Add check for error from clk_round_rate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62928315ad ]
This moves the functions called by pwm consumers above the functions
called by pwm providers. When character device support is added later
this is hooked into the chip registration functions. As the needed
callbacks are a kind of consumer and make use of the consumer functions,
having this order is more natural and prevents having to add
declarations for static functions.
Also move the global variables for pwm tables to the respective
functions to have them properly grouped.
Link: https://lore.kernel.org/r/eed83de07bdfb69b5ceba0b9aed757ee612dea8f.1706182805.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Stable-dep-of: 3e551115ae ("pwm: meson: Add check for error from clk_round_rate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40ade0c2e7 ]
With this extension of_pwm_xlate_with_flags() is suitable to replace the
custom xlate function of the pwm-clps711x driver.
While touching these very similar functions align their implementations.
Link: https://lore.kernel.org/r/127622315d07d9d419ae8e6373c7e5be7fab7a62.1704835845.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Stable-dep-of: 3e551115ae ("pwm: meson: Add check for error from clk_round_rate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e77431cda ]
Apart from the two of_xlate implementations this member is write-only.
In the of_xlate functions of_pwm_xlate_with_flags() and
of_pwm_single_xlate() it's more sensible to check for args->args_count
because this is what is actually used in the device tree.
Acked-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/53d8c545aa8f79a920358be9e72e382b3981bdc4.1704835845.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Stable-dep-of: 3e551115ae ("pwm: meson: Add check for error from clk_round_rate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19468ed514 ]
The cgroup1_hierarchy test uses setup_classid_environment to setup
cgroupv1 environment. The problem is that the environment is set in
/sys/fs/cgroup and therefore, if not run under an own mount namespace,
effectively deletes all system cgroups:
$ ls /sys/fs/cgroup | wc -l
27
$ sudo ./test_progs -t cgroup1_hierarchy
#41/1 cgroup1_hierarchy/test_cgroup1_hierarchy:OK
#41/2 cgroup1_hierarchy/test_root_cgid:OK
#41/3 cgroup1_hierarchy/test_invalid_level:OK
#41/4 cgroup1_hierarchy/test_invalid_cgid:OK
#41/5 cgroup1_hierarchy/test_invalid_hid:OK
#41/6 cgroup1_hierarchy/test_invalid_cgrp_name:OK
#41/7 cgroup1_hierarchy/test_invalid_cgrp_name2:OK
#41/8 cgroup1_hierarchy/test_sleepable_prog:OK
#41 cgroup1_hierarchy:OK
Summary: 1/8 PASSED, 0 SKIPPED, 0 FAILED
$ ls /sys/fs/cgroup | wc -l
1
To avoid this, run setup_cgroup_environment first which will create an
own mount namespace. This only affects the cgroupv1_hierarchy test as
all other cgroup1 test progs already run setup_cgroup_environment prior
to running setup_classid_environment.
Also add a comment to the header of setup_classid_environment to warn
against this invalid usage in future.
Fixes: 360769233c ("selftests/bpf: Add selftests for cgroup1 hierarchy")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240429112311.402497-1-vmalik@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0db63c0b86 ]
The verifier assumes that 'sk' field in 'struct socket' is valid
and non-NULL when 'socket' pointer itself is trusted and non-NULL.
That may not be the case when socket was just created and
passed to LSM socket_accept hook.
Fix this verifier assumption and adjust tests.
Reported-by: Liam Wisehart <liamwisehart@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Fixes: 6fcd486b3a ("bpf: Refactor RCU enforcement in the verifier.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20240427002544.68803-1-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6dd09b3da ]
Syzkaller reports [1] hitting a warning which is caused by presence
of a wrong endpoint type at the URB sumbitting stage. While there
was a check for a specific 4th endpoint, since it can switch types
between bulk and interrupt, other endpoints are trusted implicitly.
Similar warning is triggered in a couple of other syzbot issues [2].
Fix the issue by doing a comprehensive check of all endpoints
taking into account difference between high- and full-speed
configuration.
[1] Syzkaller report:
...
WARNING: CPU: 0 PID: 4721 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
...
Call Trace:
<TASK>
carl9170_usb_send_rx_irq_urb+0x273/0x340 drivers/net/wireless/ath/carl9170/usb.c:504
carl9170_usb_init_device drivers/net/wireless/ath/carl9170/usb.c:939 [inline]
carl9170_usb_firmware_finish drivers/net/wireless/ath/carl9170/usb.c:999 [inline]
carl9170_usb_firmware_step2+0x175/0x240 drivers/net/wireless/ath/carl9170/usb.c:1028
request_firmware_work_func+0x130/0x240 drivers/base/firmware_loader/main.c:1107
process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
worker_thread+0x669/0x1090 kernel/workqueue.c:2436
kthread+0x2e8/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
</TASK>
[2] Related syzkaller crashes:
Link: https://syzkaller.appspot.com/bug?extid=e394db78ae0b0032cb4d
Link: https://syzkaller.appspot.com/bug?extid=9468df99cb63a4a4c4e1
Reported-and-tested-by: syzbot+0ae4804973be759fa420@syzkaller.appspotmail.com
Fixes: a84fab3cbf ("carl9170: 802.11 rx/tx processing and usb backend")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Acked-By: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240422183355.3785-1-n.zhandarovich@fintech.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d301a71c76 ]
The via-macii ADB driver calls request_irq() after disabling hard
interrupts. But disabling interrupts isn't necessary here because the
VIA shift register interrupt was masked during VIA1 initialization.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/419fcc09d0e563b425c419053d02236b044d86b0.1710298421.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd42ba1c8a ]
This came while reviewing commit c4e86b4363 ("net: add two more
call_rcu_hurry()").
Paolo asked if adding one synchronize_rcu() would help.
While synchronize_rcu() does not help, making sure to call
rcu_barrier() before msleep(wait) is definitely helping
to make sure lazy call_rcu() are completed.
Instead of waiting ~100 seconds in my tests, the ref_tracker
splats occurs one time only, and netdev_wait_allrefs_any()
latency is reduced to the strict minimum.
Ideally we should audit our call_rcu() users to make sure
no refcount (or cascading call_rcu()) is held too long,
because rcu_barrier() is quite expensive.
Fixes: 0e4be9e57e ("net: use exponential backoff in netdev_wait_allrefs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/all/28bbf698-befb-42f6-b561-851c67f464aa@kernel.org/T/#m76d73ed6b03cd930778ac4d20a777f22a08d6824
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 582c1aeee0 ]
pci_alloc_irq_vectors() allocates an irq vector. When devm_add_action()
fails, the irq vector is not freed, which leads to a memory leak.
Replace the devm_add_action with devm_add_action_or_reset to ensure
the irq vector can be destroyed when it fails.
Fixes: 66637ab137 ("drivers/perf: hisi: add driver for HNS3 PMU")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240425124627.13764-4-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81bdd60a3d ]
The perf tool allows users to create event groups through following
cmd [1], but the driver does not check whether the array index is out
of bounds when writing data to the event_group array. If the number of
events in an event_group is greater than HNS3_PMU_MAX_HW_EVENTS, the
memory write overflow of event_group array occurs.
Add array index check to fix the possible array out of bounds violation,
and return directly when write new events are written to array bounds.
There are 9 different events in an event_group.
[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}
Fixes: 66637ab137 ("drivers/perf: hisi: add driver for HNS3 PMU")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20240425124627.13764-3-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77fce82678 ]
The perf tool allows users to create event groups through following
cmd [1], but the driver does not check whether the array index is out of
bounds when writing data to the event_group array. If the number of events
in an event_group is greater than HISI_PCIE_MAX_COUNTERS, the memory write
overflow of event_group array occurs.
Add array index check to fix the possible array out of bounds violation,
and return directly when write new events are written to array bounds.
There are 9 different events in an event_group.
[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}'
Fixes: 8404b0fbc7 ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240425124627.13764-2-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bb0b194ae ]
Instead of of_clk_get_by_name() use devm_clk_get_prepared() which has
several advantages:
- Combines getting the clock and a call to clk_prepare(). The latter
can be dropped from sti_pwm_probe() accordingly.
- Cares for calling clk_put() which is missing in both probe's error
path and the remove function.
- Cares for calling clk_unprepare() which can be dropped from the error
paths and the remove function. (Note that not all error path got this
right.)
With additionally using devm_pwmchip_add() instead of pwmchip_add() the
remove callback can be dropped completely. With it the last user of
platform_get_drvdata() goes away and so platform_set_drvdata() can be
dropped from the probe function, too.
Fixes: 378fe115d1 ("pwm: sti: Add new driver for ST's PWM IP")
Link: https://lore.kernel.org/r/81f0e1d173652f435afda6719adaed1922fe059a.1710068192.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54272761ce ]
This prepares the driver for further changes that will drop struct
pwm_chip chip from struct sti_pwm_chip. Use the pwm_chip as driver data
instead of the sti_pwm_chip to get access to the pwm_chip in
sti_pwm_remove() without using pc->chip.
Link: https://lore.kernel.org/r/56d53372aacff6871df4d6c6779c9dac94592696.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Stable-dep-of: 5bb0b194ae ("pwm: sti: Simplify probe function using devm functions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31a0fa0019 ]
If cdev_dt_seq_show() runs before the first state transition of a cooling
device, it will not print any state residency information for it, even
though it might be reasonably expected to print residency information for
the initial state of the cooling device.
For this reason, rearrange the code to get the initial state of a cooling
device at the registration time and pass it to thermal_debug_cdev_add(),
so that the latter can create a duration record for that state which will
allow cdev_dt_seq_show() to print its residency information.
Fixes: 755113d767 ("thermal/debugfs: Add thermal cooling device debugfs information")
Reported-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
