mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2025-01-15 01:44:52 +00:00
308 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Lukas Wunner
|
a03a728e37 |
crypto: rsassa-pkcs1 - Reinstate support for legacy protocols
Commit 1e562deacecc ("crypto: rsassa-pkcs1 - Migrate to sig_alg backend")
enforced that rsassa-pkcs1 sign/verify operations specify a hash
algorithm. That is necessary because per RFC 8017 sec 8.2, a hash
algorithm identifier must be prepended to the hash before generating or
verifying the signature ("Full Hash Prefix").
However the commit went too far in that it changed user space behavior:
KEYCTL_PKEY_QUERY system calls now return -EINVAL unless they specify a
hash algorithm. Intel Wireless Daemon (iwd) is one application issuing
such system calls (for EAP-TLS).
Closer analysis of the Embedded Linux Library (ell) used by iwd reveals
that the problem runs even deeper: When iwd uses TLS 1.1 or earlier, it
not only queries for keys, but performs sign/verify operations without
specifying a hash algorithm. These legacy TLS versions concatenate an
MD5 to a SHA-1 hash and omit the Full Hash Prefix:
https://git.kernel.org/pub/scm/libs/ell/ell.git/tree/ell/tls-suites.c#n97
TLS 1.1 was deprecated in 2021 by RFC 8996, but removal of support was
inadvertent in this case. It probably should be coordinated with iwd
maintainers first.
So reinstate support for such legacy protocols by defaulting to hash
algorithm "none" which uses an empty Full Hash Prefix.
If it is later on decided to remove TLS 1.1 support but still allow
KEYCTL_PKEY_QUERY without a hash algorithm, that can be achieved by
reverting the present commit and replacing it with the following patch:
https://lore.kernel.org/r/ZxalYZwH5UiGX5uj@wunner.de/
It's worth noting that Python's cryptography library gained support for
such legacy use cases very recently, so they do seem to still be a thing.
The Python developers identified IKE version 1 as another protocol
omitting the Full Hash Prefix:
https://github.com/pyca/cryptography/issues/10226
https://github.com/pyca/cryptography/issues/5495
The author of those issues, Zoltan Kelemen, spent considerable effort
searching for test vectors but only found one in a 2019 blog post by
Kevin Jones. Add it to testmgr.h to verify correctness of this feature.
Examination of wpa_supplicant as well as various IKE daemons (libreswan,
strongswan, isakmpd, raccoon) has determined that none of them seems to
use the kernel's Key Retention Service, so iwd is the only affected user
space application known so far.
Fixes: 1e562deacecc ("crypto: rsassa-pkcs1 - Migrate to sig_alg backend")
Reported-by: Klara Modin <klarasmodin@gmail.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Closes: https://lore.kernel.org/r/2ed09a22-86c0-4cf0-8bda-ef804ccb3413@gmail.com/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
||
|
Dr. David Alan Gilbert
|
acb0ed8432 |
crypto: asymmetric_keys - Remove unused functions
encrypt_blob(), decrypt_blob() and create_signature() were some of the
functions added in 2018 by
commit 5a30771832aa ("KEYS: Provide missing asymmetric key subops for new
key type ops [ver #2]")
however, they've not been used.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
||
|
Lukas Wunner
|
b04163863c |
crypto: ecdsa - Support P1363 signature decoding
Alternatively to the X9.62 encoding of ecdsa signatures, which uses
ASN.1 and is already supported by the kernel, there's another common
encoding called P1363. It stores r and s as the concatenation of two
big endian, unsigned integers. The name originates from IEEE P1363.
Add a P1363 template in support of the forthcoming SPDM library
(Security Protocol and Data Model) for PCI device authentication.
P1363 is prescribed by SPDM 1.2.1 margin no 44:
"For ECDSA signatures, excluding SM2, in SPDM, the signature shall be
the concatenation of r and s. The size of r shall be the size of
the selected curve. Likewise, the size of s shall be the size of
the selected curve. See BaseAsymAlgo in NEGOTIATE_ALGORITHMS for
the size of r and s. The byte order for r and s shall be in big
endian order. When placing ECDSA signatures into an SPDM signature
field, r shall come first followed by s."
Link: https://www.dmtf.org/sites/default/files/standards/documents/DSP0274_1.2.1.pdf
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
||
|
Lukas Wunner
|
a2471684da |
crypto: ecdsa - Move X9.62 signature size calculation into template
software_key_query() returns the maximum signature and digest size for a given key to user space. When it only supported RSA keys, calculating those sizes was trivial as they were always equivalent to the key size. However when ECDSA was added, the function grew somewhat complicated calculations which take the ASN.1 encoding and curve into account. This doesn't scale well and adjusting the calculations is easily forgotten when adding support for new encodings or curves. In fact, when NIST P521 support was recently added, the function was initially not amended: https://lore.kernel.org/all/b749d5ee-c3b8-4cbd-b252-7773e4536e07@linux.ibm.com/ Introduce a ->max_size() callback to struct sig_alg and take advantage of it to move the signature size calculations to ecdsa-x962.c. Introduce a ->digest_size() callback to struct sig_alg and move the maximum ECDSA digest size to ecdsa.c. It is common across ecdsa-x962.c and the upcoming ecdsa-p1363.c and thus inherited by both of them. For all other algorithms, continue using the key size as maximum signature and digest size. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Lukas Wunner
|
221f00418e |
crypto: sig - Rename crypto_sig_maxsize() to crypto_sig_keysize()
crypto_sig_maxsize() is a bit of a misnomer as it doesn't return the maximum signature size, but rather the key size. Rename it as well as all implementations of the ->max_size callback. A subsequent commit introduces a crypto_sig_maxsize() function which returns the actual maximum signature size. While at it, change the return type of crypto_sig_keysize() from int to unsigned int for consistency with crypto_akcipher_maxsize(). None of the callers checks for a negative return value and an error condition can always be indicated by returning zero. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Lukas Wunner
|
d6793ff974 |
crypto: ecdsa - Move X9.62 signature decoding into template
Unlike the rsa driver, which separates signature decoding and signature verification into two steps, the ecdsa driver does both in one. This restricts users to the one signature format currently supported (X9.62) and prevents addition of others such as P1363, which is needed by the forthcoming SPDM library (Security Protocol and Data Model) for PCI device authentication. Per Herbert's suggestion, change ecdsa to use a "raw" signature encoding and then implement X9.62 and P1363 as templates which convert their respective encodings to the raw one. One may then specify "x962(ecdsa-nist-XXX)" or "p1363(ecdsa-nist-XXX)" to pick the encoding. The present commit moves X9.62 decoding to a template. A separate commit is going to introduce another template for P1363 decoding. The ecdsa driver internally represents a signature as two u64 arrays of size ECC_MAX_BYTES. This appears to be the most natural choice for the raw format as it can directly be used for verification without having to further decode signature data or copy it around. Repurpose all the existing test vectors for "x962(ecdsa-nist-XXX)" and create a duplicate of them to test the raw encoding. Link: https://lore.kernel.org/all/ZoHXyGwRzVvYkcTP@gondor.apana.org.au/ Signed-off-by: Lukas Wunner <lukas@wunner.de> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Lukas Wunner
|
1e562deace |
crypto: rsassa-pkcs1 - Migrate to sig_alg backend
A sig_alg backend has just been introduced with the intent of moving all
asymmetric sign/verify algorithms to it one by one.
Migrate the sign/verify operations from rsa-pkcs1pad.c to a separate
rsassa-pkcs1.c which uses the new backend.
Consequently there are now two templates which build on the "rsa"
akcipher_alg:
* The existing "pkcs1pad" template, which is instantiated as an
akcipher_instance and retains the encrypt/decrypt operations of
RSAES-PKCS1-v1_5 (RFC 8017 sec 7.2).
* The new "pkcs1" template, which is instantiated as a sig_instance
and contains the sign/verify operations of RSASSA-PKCS1-v1_5
(RFC 8017 sec 8.2).
In a separate step, rsa-pkcs1pad.c could optionally be renamed to
rsaes-pkcs1.c for clarity. Additional "oaep" and "pss" templates
could be added for RSAES-OAEP and RSASSA-PSS.
Note that it's currently allowed to allocate a "pkcs1pad(rsa)" transform
without specifying a hash algorithm. That makes sense if the transform
is only used for encrypt/decrypt and continues to be supported. But for
sign/verify, such transforms previously did not insert the Full Hash
Prefix into the padding. The resulting message encoding was incompliant
with EMSA-PKCS1-v1_5 (RFC 8017 sec 9.2) and therefore nonsensical.
From here on in, it is no longer allowed to allocate a transform without
specifying a hash algorithm if the transform is used for sign/verify
operations. This simplifies the code because the insertion of the Full
Hash Prefix is no longer optional, so various "if (digest_info)" clauses
can be removed.
There has been a previous attempt to forbid transform allocation without
specifying a hash algorithm, namely by commit c0d20d22e0ad ("crypto:
rsa-pkcs1pad - Require hash to be present"). It had to be rolled back
with commit b3a8c8a5ebb5 ("crypto: rsa-pkcs1pad: Allow hash to be
optional [ver #2]"), presumably because it broke allocation of a
transform which was solely used for encrypt/decrypt, not sign/verify.
Avoid such breakage by allowing transform allocation for encrypt/decrypt
with and without specifying a hash algorithm (and simply ignoring the
hash algorithm in the former case).
So again, specifying a hash algorithm is now mandatory for sign/verify,
but optional and ignored for encrypt/decrypt.
The new sig_alg API uses kernel buffers instead of sglists, which
avoids the overhead of copying signature and digest from sglists back
into kernel buffers. rsassa-pkcs1.c is thus simplified quite a bit.
sig_alg is always synchronous, whereas the underlying "rsa" akcipher_alg
may be asynchronous. So await the result of the akcipher_alg, similar
to crypto_akcipher_sync_{en,de}crypt().
As part of the migration, rename "rsa_digest_info" to "hash_prefix" to
adhere to the spec language in RFC 9580. Otherwise keep the code
unmodified wherever possible to ease reviewing and bisecting. Leave
several simplification and hardening opportunities to separate commits.
rsassa-pkcs1.c uses modern __free() syntax for allocation of buffers
which need to be freed by kfree_sensitive(), hence a DEFINE_FREE()
clause for kfree_sensitive() is introduced herein as a byproduct.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
||
|
Roman Smirnov
|
70fd1966c9 |
KEYS: prevent NULL pointer dereference in find_asymmetric_key()
In find_asymmetric_key(), if all NULLs are passed in the id_{0,1,2}
arguments, the kernel will first emit WARN but then have an oops
because id_2 gets dereferenced anyway.
Add the missing id_2 check and move WARN_ON() to the final else branch
to avoid duplicate NULL checks.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Cc: stable@vger.kernel.org # v5.17+
Fixes: 7d30198ee24f ("keys: X.509 public key issuer lookup without AKID")
Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
||
|
Herbert Xu
|
46b3ff73af |
crypto: sm2 - Remove sm2 algorithm
The SM2 algorithm has a single user in the kernel. However, it's never been integrated properly with that user: asymmetric_keys. The crux of the issue is that the way it computes its digest with sm3 does not fit into the architecture of asymmetric_keys. As no solution has been proposed, remove this algorithm. It can be resubmitted when it is integrated properly into the asymmetric_keys subsystem. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Linus Torvalds
|
46c6d2b186 |
Hi,
Adds a self-test testing PCKS#7 signed data against ECDSA key and couple of bug fixes for missing deps. BR, Jarkko -----BEGIN PGP SIGNATURE----- iJYEABYKAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCZkLGKyAcamFya2tvLnNh a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0jvXAP9yPAiK7nGu/xgj Nx4xJnMnMDeS4br4Kisp232pLqovxgEAgabmbihLve5Dv1OzR+pNz6qNhackj4ra C0RaWPFQlQQ= =/eej -----END PGP SIGNATURE----- Merge tag 'asymmetric-keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull asymmetric keys update from Jarkko Sakkinen: "Add a self-test testing PCKS#7 signed data against ECDSA key and couple of bug fixes for missing deps" * tag 'asymmetric-keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: certs: Add ECDSA signature verification self-test certs: Move RSA self-test data to separate file KEYS: asymmetric: Add missing dependencies of FIPS_SIGNATURE_SELFTEST KEYS: asymmetric: Add missing dependency on CRYPTO_SIG |
||
|
Joachim Vandersmissen
|
747ae81883 |
certs: Add ECDSA signature verification self-test
Commit c27b2d2012e1 ("crypto: testmgr - allow ecdsa-nist-p256 and -p384
in FIPS mode") enabled support for ECDSA in crypto/testmgr.c. The
PKCS#7 signature verification API builds upon the KCAPI primitives to
perform its high-level operations. Therefore, this change in testmgr.c
also allows ECDSA to be used by the PKCS#7 signature verification API
(in FIPS mode).
However, from a FIPS perspective, the PKCS#7 signature verification API
is a distinct "service" from the KCAPI primitives. This is because the
PKCS#7 API performs a "full" signature verification, which consists of
both hashing the data to be verified, and the public key operation.
On the other hand, the KCAPI primitive does not perform this hashing
step - it accepts pre-hashed data from the caller and only performs the
public key operation.
For this reason, the ECDSA self-tests in crypto/testmgr.c are not
sufficient to cover ECDSA signature verification offered by the PKCS#7
API. This is reflected by the self-test already present in this file
for RSA PKCS#1 v1.5 signature verification.
The solution is simply to add a second self-test here for ECDSA. P-256
with SHA-256 hashing was chosen as those parameters should remain
FIPS-approved for the foreseeable future, while keeping the performance
impact to a minimum. The ECDSA certificate and PKCS#7 signed data was
generated using OpenSSL. The input data is identical to the input data
for the existing RSA self-test.
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
||
|
Joachim Vandersmissen
|
8cd9f234f7 |
certs: Move RSA self-test data to separate file
In preparation of adding new ECDSA self-tests, the existing data for the RSA self-tests is moved to a separate file. This file is only compiled if the new CONFIG_FIPS_SIGNATURE_SELFTEST_RSA configuration option is set, which ensures that the required dependencies (RSA, SHA-256) are present. Otherwise, the kernel would panic when trying to execute the self-test. The introduction of this new option, rather than adding the dependencies to the existing CONFIG_FIPS_SIGNATURE_SELFTEST option, allows for additional self-tests to be added for different algorithms. The kernel can then be configured to only execute the self-tests for those algorithms that are included. Signed-off-by: Joachim Vandersmissen <git@jvdsn.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Linus Torvalds
|
84c7d76b5a |
This update includes the following changes:
API: - Remove crypto stats interface. Algorithms: - Add faster AES-XTS on modern x86_64 CPUs. - Forbid curves with order less than 224 bits in ecc (FIPS 186-5). - Add ECDSA NIST P521. Drivers: - Expose otp zone in atmel. - Add dh fallback for primes > 4K in qat. - Add interface for live migration in qat. - Use dma for aes requests in starfive. - Add full DMA support for stm32mpx in stm32. - Add Tegra Security Engine driver. Others: - Introduce scope-based x509_certificate allocation. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmZBjXMACgkQxycdCkmx i6cQ7g/+JPKnzQedhpJSK5AnkAkqO9kJ16JdeB7AtdSeZZA/EIFxuXZ3Fv1fH44y 1CCibowc5zdss8F/1iOqPc57u5vy2Mjyw8qlhs7JlmcYf/lo7CBGfT8Uxo7BK/S9 n+/+y47Xu5p3yt/c6ldrwqjOaWaYuaCKICZtS91XVvrxM80iVnmDSQCNkcch4KQ4 nsdcVJhS4lOStBNjKtkhWlgufqdp8RPzKYH2B6GbW9z6en8WeTbnoMhgqjqQ3UID /DHtixyee0MDUDReQrixyCM3XMV5er/qBMoDrCxipBuVrr4GMd2GlCEaZbXfTUW0 3K8Nle4KMMqi81lBAQKiD/hRjrC68FHOvVRGHtZntR0+NZ/nlinXCVWv4iHwRzAB 7BOqRTC3mfv+uMhTvgwQAkXCHAhivMokSzTaDCIrzPLjKIx2BOfVZKmPBt98LxeW 8/JfgEK4gX6wxe4GRftueEApCfWQrwYK60j5bIkescaJ/mI7M5bEByvTTob1lAka Fw5kGDy8dVnrG9HagLwnXoI1pIGmca8hV1t24Vf1OCdWLgOW+GTCIuyutL2c9AWv 0vEbytGZl69XJlIgQGVcv9RM6NlIXxHwfSHU59N/SHTXhlHjm1XWi3HCiJaZ1b6+ pcILMJ29FMs8LobiN7PT+rNu6fboaH0/o+R7OK9mKRut864xFTk= =NDS0 -----END PGP SIGNATURE----- Merge tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove crypto stats interface Algorithms: - Add faster AES-XTS on modern x86_64 CPUs - Forbid curves with order less than 224 bits in ecc (FIPS 186-5) - Add ECDSA NIST P521 Drivers: - Expose otp zone in atmel - Add dh fallback for primes > 4K in qat - Add interface for live migration in qat - Use dma for aes requests in starfive - Add full DMA support for stm32mpx in stm32 - Add Tegra Security Engine driver Others: - Introduce scope-based x509_certificate allocation" * tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (123 commits) crypto: atmel-sha204a - provide the otp content crypto: atmel-sha204a - add reading from otp zone crypto: atmel-i2c - rename read function crypto: atmel-i2c - add missing arg description crypto: iaa - Use kmemdup() instead of kzalloc() and memcpy() crypto: sahara - use 'time_left' variable with wait_for_completion_timeout() crypto: api - use 'time_left' variable with wait_for_completion_killable_timeout() crypto: caam - i.MX8ULP donot have CAAM page0 access crypto: caam - init-clk based on caam-page0-access crypto: starfive - Use fallback for unaligned dma access crypto: starfive - Do not free stack buffer crypto: starfive - Skip unneeded fallback allocation crypto: starfive - Skip dma setup for zeroed message crypto: hisilicon/sec2 - fix for register offset crypto: hisilicon/debugfs - mask the unnecessary info from the dump crypto: qat - specify firmware files for 402xx crypto: x86/aes-gcm - simplify GCM hash subkey derivation crypto: x86/aes-gcm - delete unused GCM assembly code crypto: x86/aes-xts - simplify loop in xts_crypt_slowpath() hwrng: stm32 - repair clock handling ... |
||
|
Eric Biggers
|
9d2fd8bdc1 |
KEYS: asymmetric: Add missing dependencies of FIPS_SIGNATURE_SELFTEST
Since the signature self-test uses RSA and SHA-256, it must only be enabled when those algorithms are enabled. Otherwise it fails and panics the kernel on boot-up. Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202404221528.51d75177-lkp@intel.com Fixes: 3cde3174eb91 ("certs: Add FIPS selftests") Cc: stable@vger.kernel.org Cc: Simo Sorce <simo@redhat.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Eric Biggers
|
dcaa86b904 |
KEYS: asymmetric: Add missing dependency on CRYPTO_SIG
Make ASYMMETRIC_PUBLIC_KEY_SUBTYPE select CRYPTO_SIG to avoid build
errors like the following, which were possible with
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y && CONFIG_CRYPTO_SIG=n:
ld: vmlinux.o: in function `public_key_verify_signature':
(.text+0x306280): undefined reference to `crypto_alloc_sig'
ld: (.text+0x306300): undefined reference to `crypto_sig_set_pubkey'
ld: (.text+0x306324): undefined reference to `crypto_sig_verify'
ld: (.text+0x30636c): undefined reference to `crypto_sig_set_privkey'
Fixes: 63ba4d67594a ("KEYS: asymmetric: Use new crypto interface without scatterlists")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
||
|
Lukas Wunner
|
5c6ca9d936 |
X.509: Introduce scope-based x509_certificate allocation
Add a DEFINE_FREE() clause for x509_certificate structs and use it in x509_cert_parse() and x509_key_preparse(). These are the only functions where scope-based x509_certificate allocation currently makes sense. A third user will be introduced with the forthcoming SPDM library (Security Protocol and Data Model) for PCI device authentication. Unlike most other DEFINE_FREE() clauses, this one checks for IS_ERR() instead of NULL before calling x509_free_certificate() at end of scope. That's because the "constructor" of x509_certificate structs, x509_cert_parse(), returns a valid pointer or an ERR_PTR(), but never NULL. Comparing the Assembler output before/after has shown they are identical, save for the fact that gcc-12 always generates two return paths when __cleanup() is used, one for the success case and one for the error case. In x509_cert_parse(), add a hint for the compiler that kzalloc() never returns an ERR_PTR(). Otherwise the compiler adds a gratuitous IS_ERR() check on return. Introduce an assume() macro for this which can be re-used elsewhere in the kernel to provide hints for the compiler. Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Link: https://lore.kernel.org/all/20231003153937.000034ca@Huawei.com/ Link: https://lwn.net/Articles/934679/ Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Stefan Berger
|
3ba2ae3614 |
crypto: x509 - Add OID for NIST P521 and extend parser for it
Enable the x509 parser to accept NIST P521 certificates and add the OID for ansip521r1, which is the identifier for NIST P521. Cc: David Howells <dhowells@redhat.com> Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Stefan Berger
|
4dc50330a4 |
crypto: asymmetric_keys - Adjust signature size calculation for NIST P521
Adjust the calculation of the maximum signature size for support of NIST P521. While existing curves may prepend a 0 byte to their coordinates (to make the number positive), NIST P521 will not do this since only the first bit in the most significant byte is used. If the encoding of the x & y coordinates requires at least 128 bytes then an additional byte is needed for the encoding of the length. Take this into account when calculating the maximum signature size. Reviewed-by: Lukas Wunner <lukas@wunner.de> Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Eric Biggers
|
203a6763ab |
Revert "crypto: pkcs7 - remove sha1 support"
This reverts commit 16ab7cb5825fc3425c16ad2c6e53d827f382d7c6 because it broke iwd. iwd uses the KEYCTL_PKEY_* UAPIs via its dependency libell, and apparently it is relying on SHA-1 signature support. These UAPIs are fairly obscure, and their documentation does not mention which algorithms they support. iwd really should be using a properly supported userspace crypto library instead. Regardless, since something broke we have to revert the change. It may be possible that some parts of this commit can be reinstated without breaking iwd (e.g. probably the removal of MODULE_SIG_SHA1), but for now this just does a full revert to get things working again. Reported-by: Karel Balej <balejk@matfyz.cz> Closes: https://lore.kernel.org/r/CZSHRUIJ4RKL.34T4EASV5DNJM@matfyz.cz Cc: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Tested-by: Karel Balej <balejk@matfyz.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Colin Ian King
|
f18483c987 |
crypto: asymmetric_keys - remove redundant pointer secs
The pointer secs is being assigned a value however secs is never read afterwards. The pointer secs is redundant and can be removed. Cleans up clang scan build warning: warning: Although the value stored to 'secs' is used in the enclosing expression, the value is never actually read from 'secs' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Linus Torvalds
|
bc3012f4e3 |
This update includes the following changes:
API: - Add virtual-address based lskcipher interface. - Optimise ahash/shash performance in light of costly indirect calls. - Remove ahash alignmask attribute. Algorithms: - Improve AES/XTS performance of 6-way unrolling for ppc. - Remove some uses of obsolete algorithms (md4, md5, sha1). - Add FIPS 202 SHA-3 support in pkcs1pad. - Add fast path for single-page messages in adiantum. - Remove zlib-deflate. Drivers: - Add support for S4 in meson RNG driver. - Add STM32MP13x support in stm32. - Add hwrng interface support in qcom-rng. - Add support for deflate algorithm in hisilicon/zip. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmVB3vgACgkQxycdCkmx i6dsOBAAykbnX8BpnpnOXYywE9ZWrl98rAk51MK0N9olZNfg78zRPIv7fFxFdC20 SDJrDSNPmn0Qvaa5e0EfoAdklsm0k2GkXL/BwPKMKWUsyIoJVYI3WrBMnjBy9xMp yfME+h0bKoXJCZKnYkIUSGUejmUPSyRlEylrXoFlH/VWYwAaii/x9zwreQoF+0LR KI24A1q8AYs6Dw9HSfndaAub9GOzrqKYs6fSaMG+77Y4UC5aoi5J9Bp2G3uVyHay x/0bZtIxKXS9wn+LeG/3GspX23x/I5VwBOdAoMigrYmAIaIg5qgyMszudltTAs4R zF1Kh7WsnM5+vpnBSeigzo+/GGOU3QTz8y3tBTg+3ZR7GWGOwQLiizhOYqCyOfAH pIm6c++sZw/OOHiL69Nt4HeLKzGNYYWk3s4X/B/6cqoouPfOsfBaQobZNx9zfy7q ZNEvSVBjrFX/L6wDSotny1LTWLUNjHbmLaMV5uQZ/SQKEtv19fp2Dl7SsLkHH+3v ldOAwfoJR6QcSwz3Ez02TUAvQhtP172Hnxi7u44eiZu2aUboLhCFr7aEU6kVdBCx 1rIRVHD1oqlOEDRwPRXzhF3I8R4QDORJIxZ6UUhg7yueuI+XCGDsBNC+LqBrBmSR IbdjqmSDUBhJyM5yMnt1VFYhqKQ/ZzwZ3JQviwW76Es9pwEIolM= =IZmR -----END PGP SIGNATURE----- Merge tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add virtual-address based lskcipher interface - Optimise ahash/shash performance in light of costly indirect calls - Remove ahash alignmask attribute Algorithms: - Improve AES/XTS performance of 6-way unrolling for ppc - Remove some uses of obsolete algorithms (md4, md5, sha1) - Add FIPS 202 SHA-3 support in pkcs1pad - Add fast path for single-page messages in adiantum - Remove zlib-deflate Drivers: - Add support for S4 in meson RNG driver - Add STM32MP13x support in stm32 - Add hwrng interface support in qcom-rng - Add support for deflate algorithm in hisilicon/zip" * tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits) crypto: adiantum - flush destination page before unmapping crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place Documentation/module-signing.txt: bring up to date module: enable automatic module signing with FIPS 202 SHA-3 crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support crypto: FIPS 202 SHA-3 register in hash info for IMA x509: Add OIDs for FIPS 202 SHA-3 hash and signatures crypto: ahash - optimize performance when wrapping shash crypto: ahash - check for shash type instead of not ahash type crypto: hash - move "ahash wrapping shash" functions to ahash.c crypto: talitos - stop using crypto_ahash::init crypto: chelsio - stop using crypto_ahash::init crypto: ahash - improve file comment crypto: ahash - remove struct ahash_request_priv crypto: ahash - remove crypto_ahash_alignmask crypto: gcm - stop using alignmask of ahash crypto: chacha20poly1305 - stop using alignmask of ahash crypto: ccm - stop using alignmask of ahash net: ipv6: stop checking crypto_ahash_alignmask ... |
||
|
Linus Torvalds
|
ca219be012 |
integrity-v6.7
-----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCZUDyWhQcem9oYXJAbGlu dXguaWJtLmNvbQAKCRDLwZzRsCrn5QtIAPwLSdHw2qix1A6lMhbRiXqFOWINHcTF DMtZkiPmpeuTKAEA0KaXfddKq5OC5S/ixPEEZCVqOq2ixxfMDhudyoh/qQs= =lh3g -----END PGP SIGNATURE----- Merge tag 'integrity-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "Four integrity changes: two IMA-overlay updates, an integrity Kconfig cleanup, and a secondary keyring update" * tag 'integrity-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: detect changes to the backing overlay file certs: Only allow certs signed by keys on the builtin keyring integrity: fix indentation of config attributes ima: annotate iint mutex to avoid lockdep false positive warnings |
||
|
Mimi Zohar
|
b46503068c |
certs: Only allow certs signed by keys on the builtin keyring
Originally the secondary trusted keyring provided a keyring to which extra keys may be added, provided those keys were not blacklisted and were vouched for by a key built into the kernel or already in the secondary trusted keyring. On systems with the machine keyring configured, additional keys may also be vouched for by a key on the machine keyring. Prevent loading additional certificates directly onto the secondary keyring, vouched for by keys on the machine keyring, yet allow these certificates to be loaded onto other trusted keyrings. Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
|
Dimitri John Ledkov
|
fdb4f66c95 |
crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
Add FIPS 202 SHA-3 hash signature support in x509 certificates, pkcs7 signatures, and authenticode signatures. Supports hashes of size 256 and up, as 224 is too weak for any practical purposes. Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Lukas Wunner
|
201c0da4d0 |
treewide: Add SPDX identifier to IETF ASN.1 modules
Per section 4.c. of the IETF Trust Legal Provisions, "Code Components" in IETF Documents are licensed on the terms of the BSD-3-Clause license: https://trustee.ietf.org/documents/trust-legal-provisions/tlp-5/ The term "Code Components" specifically includes ASN.1 modules: https://trustee.ietf.org/documents/trust-legal-provisions/code-components-list-3/ Add an SPDX identifier as well as a copyright notice pursuant to section 6.d. of the Trust Legal Provisions to all ASN.1 modules in the tree which are derived from IETF Documents. Section 4.d. of the Trust Legal Provisions requests that each Code Component identify the RFC from which it is taken, so link that RFC in every ASN.1 module. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Herbert Xu
|
04a93202ed |
certs: Break circular dependency when selftest is modular
The modular build fails because the self-test code depends on pkcs7
which in turn depends on x509 which contains the self-test.
Split the self-test out into its own module to break the cycle.
Fixes: 3cde3174eb91 ("certs: Add FIPS selftests")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
||
|
Dimitri John Ledkov
|
c1d760a471 |
crypto: mscode_parser - remove sha224 authenticode support
It is possible to stand up own certificates and sign PE-COFF binaries using SHA-224. However it never became popular or needed since it has similar costs as SHA-256. Windows Authenticode infrastructure never had support for SHA-224, and all secureboot keys used fro linux vmlinuz have always been using at least SHA-256. Given the point of mscode_parser is to support interoperatiblity with typical de-facto hashes, remove support for SHA-224 to avoid posibility of creating interoperatibility issues with rhboot/shim, grub, and non-linux systems trying to sign or verify vmlinux. SHA-224 itself is not removed from the kernel, as it is truncated SHA-256. If requested I can write patches to remove SHA-224 support across all of the drivers. Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Dimitri John Ledkov
|
16ab7cb582 |
crypto: pkcs7 - remove sha1 support
Removes support for sha1 signed kernel modules, importing sha1 signed x.509 certificates. rsa-pkcs1pad keeps sha1 padding support, which seems to be used by virtio driver. sha1 remains available as there are many drivers and subsystems using it. Note only hmac(sha1) with secret keys remains cryptographically secure. In the kernel there are filesystems, IMA, tpm/pcr that appear to be using sha1. Maybe they can all start to be slowly upgraded to something else i.e. blake3, ParallelHash, SHAKE256 as needed. Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Herbert Xu
|
b11950356c |
KEYS: asymmetric: Fix sign/verify on pkcs1pad without a hash
The new sign/verify code broke the case of pkcs1pad without a
hash algorithm. Fix it by setting issig correctly for this case.
Fixes: 63ba4d67594a ("KEYS: asymmetric: Use new crypto interface without scatterlists")
Cc: stable@vger.kernel.org # v6.5
Reported-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
||
|
Dimitri John Ledkov
|
8468516f9f |
crypto: pkcs7 - remove md4 md5 x.509 support
Remove support for md4 md5 hash and signatures in x.509 certificate parsers, pkcs7 signature parser, authenticode parser. All of these are insecure or broken, and everyone has long time ago migrated to alternative hash implementations. Also remove md2 & md3 oids which have already didn't have support. This is also likely the last user of md4 in the kernel, and thus crypto/md4.c and related tests in tcrypt & testmgr can likely be removed. Other users such as cifs smbfs ext modpost sumversions have their own internal implementation as needed. Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Lukas Wunner
|
a1e452026e |
X.509: Add missing IMPLICIT annotations to AKID ASN.1 module
The ASN.1 module in RFC 5280 appendix A.1 uses EXPLICIT TAGS whereas the
one in appendix A.2 uses IMPLICIT TAGS.
The kernel's simplified asn1_compiler.c always uses EXPLICIT TAGS, hence
definitions from appendix A.2 need to be annotated as IMPLICIT for the
compiler to generate RFC-compliant code.
In particular, GeneralName is defined in appendix A.2:
GeneralName ::= CHOICE {
otherName [0] OtherName,
...
dNSName [2] IA5String,
x400Address [3] ORAddress,
directoryName [4] Name,
...
}
Because appendix A.2 uses IMPLICIT TAGS, the IA5String tag (0x16) of a
dNSName is not rendered. Instead, the string directly succeeds the
[2] tag (0x82).
Likewise, the SEQUENCE tag (0x30) of an OtherName is not rendered.
Instead, only the constituents of the SEQUENCE are rendered: An OID tag
(0x06), a [0] tag (0xa0) and an ANY tag. That's three consecutive tags
instead of a single encompassing tag.
The situation is different for x400Address and directoryName choices:
They reference ORAddress and Name, which are defined in appendix A.1,
therefore use EXPLICIT TAGS.
The AKID ASN.1 module is missing several IMPLICIT annotations, hence
isn't RFC-compliant. In the unlikely event that an AKID contains other
elements beside a directoryName, users may see parse errors.
Add the missing annotations but do not tag this commit for stable as I
am not aware of any issue reports. Fixes are only eligible for stable
if they're "obviously correct" and with ASN.1 there's no such thing.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
||
|
Linus Torvalds
|
68cf01760b |
This update includes the following changes:
API: - Move crypto engine callback from tfm ctx into algorithm object. - Fix atomic sleep bug in crypto_destroy_instance. - Move lib/mpi into lib/crypto. Algorithms: - Add chacha20 and poly1305 implementation for powerpc p10. Drivers: - Add AES skcipher and aead support to starfive. - Add Dynamic Boost Control support to ccp. - Add support for STM32P13 platform to stm32. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmTsZkMACgkQxycdCkmx i6furw//e6kYK1CTOqidPM6nI0KK1Ok204VXu56H0wM4THZ09ZwcbDNKpvI6vjMi XZkKthiayl/1okmpRVP0rPqMWDtxajeu6IUAQqqFGUFU8R7AqCDrOd+te+zlSFWG 16ySNQO47RND0OzNqZ4ojgCC0n9RpP+zOfndmderZ4EnfXSbodwGUwkcuE7Z96cP jNoainO2iwlyMZPlVynrw61O3RxGu/s/ch+uY1mV+TyvAAWoOlzt57gYUs3eGduz 4Ky+0Ubctg3sfBaqA2Hg6GjtAqG/QUssRyj8YgsFMrgXPHDTbLh6abej39wWo4gz ZdC7Bm47hV/yfVdWe2iq3/5iqdILEdPBh3fDh6NNsZ1Jlm3aEZpH9rEXm0k4X2MJ A9NDAFVj8dAYVZza7+Y8jPc8FNe+HqN9HYip/2K7g68WAJGWnMc9lq9qGwGmg1Gl dn6yM27AgH8B+UljWYM9FS1ZFsc8KCudJavRZqA2d0W3rbXVWAoBBp83ii0yX1Nm ZPAblAYMZCDeCtrVrDYKLtGn566rfpCrv3R5cppwHLksGJsDxgWrjG47l9uy5HXI u05jiXT11R+pjIU2Wv5qsiUIhyvli6AaiFYHIdZ8fWaovPAOdhrCrN3IryvUVHj/ LqMcnmW1rWGNYN9pqHn0sQZ730ZJIma0klhTZOn8HPJNbiK68X0= =LbcA -----END PGP SIGNATURE----- Merge tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Move crypto engine callback from tfm ctx into algorithm object - Fix atomic sleep bug in crypto_destroy_instance - Move lib/mpi into lib/crypto Algorithms: - Add chacha20 and poly1305 implementation for powerpc p10 Drivers: - Add AES skcipher and aead support to starfive - Add Dynamic Boost Control support to ccp - Add support for STM32P13 platform to stm32" * tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits) Revert "dt-bindings: crypto: qcom,prng: Add SM8450" crypto: chelsio - Remove unused declarations X.509: if signature is unsupported skip validation crypto: qat - fix crypto capability detection for 4xxx crypto: drivers - Explicitly include correct DT includes crypto: engine - Remove crypto_engine_ctx crypto: zynqmp - Use new crypto_engine_op interface crypto: virtio - Use new crypto_engine_op interface crypto: stm32 - Use new crypto_engine_op interface crypto: jh7110 - Use new crypto_engine_op interface crypto: rk3288 - Use new crypto_engine_op interface crypto: omap - Use new crypto_engine_op interface crypto: keembay - Use new crypto_engine_op interface crypto: sl3516 - Use new crypto_engine_op interface crypto: caam - Use new crypto_engine_op interface crypto: aspeed - Remove non-standard sha512 algorithms crypto: aspeed - Use new crypto_engine_op interface crypto: amlogic - Use new crypto_engine_op interface crypto: sun8i-ss - Use new crypto_engine_op interface crypto: sun8i-ce - Use new crypto_engine_op interface ... |
||
|
Thore Sommer
|
ef5b52a631 |
X.509: if signature is unsupported skip validation
When the hash algorithm for the signature is not available the digest size is 0 and the signature in the certificate is marked as unsupported. When validating a self-signed certificate, this needs to be checked, because otherwise trying to validate the signature will fail with an warning: Loading compiled-in X.509 certificates WARNING: CPU: 0 PID: 1 at crypto/rsa-pkcs1pad.c:537 \ pkcs1pad_verify+0x46/0x12c ... Problem loading in-kernel X.509 certificate (-22) Signed-off-by: Thore Sommer <public@thson.de> Cc: stable@vger.kernel.org # v4.7+ Fixes: 6c2dc5ae4ab7 ("X.509: Extract signature digest and make self-signed cert checks earlier") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Eric Snowberg
|
4cfb908054 |
KEYS: DigitalSignature link restriction
Add a new link restriction. Restrict the addition of keys in a keyring based on the key having digitalSignature usage set. Additionally, verify the new certificate against the ones in the system keyrings. Add two additional functions to use the new restriction within either the builtin or secondary keyrings. [jarkko@kernel.org: Fix checkpatch.pl --strict issues] Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Reviewed-and-tested-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Mahmoud Adam
|
9f3fa6bc4f |
KEYS: use kfree_sensitive with key
key might contain private part of the key, so better use kfree_sensitive to free it Signed-off-by: Mahmoud Adam <mngyadam@amazon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Gaosheng Cui
|
31ba6dd229 |
KEYS: fix kernel-doc warnings in verify_pefile
Fix kernel-doc warnings in verify_pefile: crypto/asymmetric_keys/verify_pefile.c:423: warning: Excess function parameter 'trust_keys' description in 'verify_pefile_signature' crypto/asymmetric_keys/verify_pefile.c:423: warning: Function parameter or member 'trusted_keys' not described in 'verify_pefile_signature' Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Dan Carpenter
|
9e9311e04e |
KEYS: asymmetric: Fix error codes
These error paths should return the appropriate error codes instead of
returning success.
Fixes: 63ba4d67594a ("KEYS: asymmetric: Use new crypto interface without scatterlists")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
||
|
Herbert Xu
|
63ba4d6759 |
KEYS: asymmetric: Use new crypto interface without scatterlists
Use the new akcipher and sig interfaces which no longer have scatterlists in them. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Herbert Xu
|
e5221fa6a3 |
KEYS: asymmetric: Move sm2 code into x509_public_key
The sm2 certificate requires a modified digest. Move the code for the hashing from the signature verification path into the code where we generate the digest. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Linus Torvalds
|
b6a7828502 |
modules-6.4-rc1
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin
or tristate.conf"). Nick has been working on this *for years* and
AFAICT I was the only one to suggest two alternatives to this approach
for tooling. The complexity in one of my suggested approaches lies in
that we'd need a possible-obj-m and a could-be-module which would check
if the object being built is part of any kconfig build which could ever
lead to it being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've
suggested would be to have a tristate in kconfig imply the same new
-DPOSSIBLE_MODULE as well but that means getting kconfig symbol names
mapping to modules always, and I don't think that's the case today. I am
not aware of Nick or anyone exploring either of these options. Quite
recently Josh Poimboeuf has pointed out that live patching, kprobes and
BPF would benefit from resolving some part of the disambiguation as
well but for other reasons. The function granularity KASLR (fgkaslr)
patches were mentioned but Joe Lawrence has clarified this effort has
been dropped with no clear solution in sight [1].
In the meantime removing module license tags from code which could never
be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up,
and so you'll see quite a bit of Nick's patches in other pull
requests for this merge window. I just picked up the stragglers after
rc3. LWN has good coverage on the motivation behind this work [2] and
the typical cross-tree issues he ran into along the way. The only
concrete blocker issue he ran into was that we should not remove the
MODULE_LICENSE() tags from files which have no SPDX tags yet, even if
they can never be modules. Nick ended up giving up on his efforts due
to having to do this vetting and backlash he ran into from folks who
really did *not understand* the core of the issue nor were providing
any alternative / guidance. I've gone through his changes and dropped
the patches which dropped the module license tags where an SPDX
license tag was missing, it only consisted of 11 drivers. To see
if a pull request deals with a file which lacks SPDX tags you
can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above,
but that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but
it demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees,
and I just picked up the slack after rc3 for the last kernel was out.
Those changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on
a systems with over 400 CPUs when KASAN was enabled due to running
out of virtual memory space. Although the functional change only
consists of 3 lines in the patch "module: avoid allocation if module is
already present and ready", proving that this was the best we can
do on the modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been
in linux-next since around rc3 of the last kernel, the actual final
fix for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported
with larger number of CPUs. Userspace is not yet fixed as it is taking
a bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge them,
but I'm currently inclined to just see if userspace can fix this
instead.
[0] https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/
[1] https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com
[2] https://lwn.net/Articles/927569/
[3] https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org
-----BEGIN PGP SIGNATURE-----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=56WK
-----END PGP SIGNATURE-----
Merge tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
|
||
|
Eric Snowberg
|
099f26f22f |
integrity: machine keyring CA configuration
Add machine keyring CA restriction options to control the type of keys that may be added to it. The motivation is separation of certificate signing from code signing keys. Subsquent work will limit certificates being loaded into the IMA keyring to code signing keys used for signature verification. When no restrictions are selected, all Machine Owner Keys (MOK) are added to the machine keyring. When CONFIG_INTEGRITY_CA_MACHINE_KEYRING is selected, the CA bit must be true. Also the key usage must contain keyCertSign, any other usage field may be set as well. When CONFIG_INTEGRITY_CA_MACHINE_KEYRING_MAX is selected, the CA bit must be true. Also the key usage must contain keyCertSign and the digitialSignature usage may not be set. Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Acked-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Eric Snowberg
|
76adb2fbc6 |
KEYS: CA link restriction
Add a new link restriction. Restrict the addition of keys in a keyring based on the key to be added being a CA. Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Eric Snowberg
|
567671281a |
KEYS: X.509: Parse Key Usage
Parse the X.509 Key Usage. The key usage extension defines the purpose of
the key contained in the certificate.
id-ce-keyUsage OBJECT IDENTIFIER ::= { id-ce 15 }
KeyUsage ::= BIT STRING {
digitalSignature (0),
contentCommitment (1),
keyEncipherment (2),
dataEncipherment (3),
keyAgreement (4),
keyCertSign (5),
cRLSign (6),
encipherOnly (7),
decipherOnly (8) }
If the keyCertSign or digitalSignature is set, store it in the
public_key structure. Having the purpose of the key being stored
during parsing, allows enforcement on the usage field in the future.
This will be used in a follow on patch that requires knowing the
certificate key usage type.
Link: https://www.rfc-editor.org/rfc/rfc5280#section-4.2.1.3
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
||
|
Eric Snowberg
|
30eae2b037 |
KEYS: X.509: Parse Basic Constraints for CA
Parse the X.509 Basic Constraints. The basic constraints extension
identifies whether the subject of the certificate is a CA.
BasicConstraints ::= SEQUENCE {
cA BOOLEAN DEFAULT FALSE,
pathLenConstraint INTEGER (0..MAX) OPTIONAL }
If the CA is true, store it in the public_key. This will be used
in a follow on patch that requires knowing if the public key is a CA.
Link: https://www.rfc-editor.org/rfc/rfc5280#section-4.2.1.9
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
||
|
Nick Alcock
|
8a8dd17d2a |
KEYS: remove MODULE_LICENSE in non-modules
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: keyrings@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
||
|
Robbie Harwood
|
3584c1dbff |
asymmetric_keys: log on fatal failures in PE/pkcs7
These particular errors can be encountered while trying to kexec when secureboot lockdown is in place. Without this change, even with a signed debug build, one still needs to reboot the machine to add the appropriate dyndbg parameters (since lockdown blocks debugfs). Accordingly, upgrade all pr_debug() before fatal error into pr_warn(). Signed-off-by: Robbie Harwood <rharwood@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Jarkko Sakkinen <jarkko@kernel.org> cc: Eric Biederman <ebiederm@xmission.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: keyrings@vger.kernel.org cc: linux-crypto@vger.kernel.org cc: kexec@lists.infradead.org Link: https://lore.kernel.org/r/20230220171254.592347-3-rharwood@redhat.com/ # v2 |
||
|
Robbie Harwood
|
4fc5c74dde |
verify_pefile: relax wrapper length check
The PE Format Specification (section "The Attribute Certificate Table (Image Only)") states that `dwLength` is to be rounded up to 8-byte alignment when used for traversal. Therefore, the field is not required to be an 8-byte multiple in the first place. Accordingly, pesign has not performed this alignment since version 0.110. This causes kexec failure on pesign'd binaries with "PEFILE: Signature wrapper len wrong". Update the comment and relax the check. Signed-off-by: Robbie Harwood <rharwood@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Jarkko Sakkinen <jarkko@kernel.org> cc: Eric Biederman <ebiederm@xmission.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: keyrings@vger.kernel.org cc: linux-crypto@vger.kernel.org cc: kexec@lists.infradead.org Link: https://learn.microsoft.com/en-us/windows/win32/debug/pe-format#the-attribute-certificate-table-image-only Link: https://github.com/rhboot/pesign Link: https://lore.kernel.org/r/20230220171254.592347-2-rharwood@redhat.com/ # v2 |
||
|
Linus Torvalds
|
5b7c4cabbb |
Networking changes for 6.3.
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
|
||
|
Denis Kenzior
|
10de7b5429 |
KEYS: asymmetric: Fix ECDSA use via keyctl uapi
When support for ECDSA keys was added, constraints for data & signature
sizes were never updated. This makes it impossible to use such keys via
keyctl API from userspace.
Update constraint on max_data_size to 64 bytes in order to support
SHA512-based signatures. Also update the signature length constraints
per ECDSA signature encoding described in RFC 5480.
Fixes: 299f561a6693 ("x509: Add support for parsing x509 certs with ECDSA keys")
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
||
|
Arnd Bergmann
|
0f5d4a0b99 |
crypto: certs: fix FIPS selftest dependency
The selftest code is built into the x509_key_parser module, and depends on the pkcs7_message_parser module, which in turn has a dependency on the key parser, creating a dependency loop and a resulting link failure when the pkcs7 code is a loadable module: ld: crypto/asymmetric_keys/selftest.o: in function `fips_signature_selftest': crypto/asymmetric_keys/selftest.c:205: undefined reference to `pkcs7_parse_message' ld: crypto/asymmetric_keys/selftest.c:209: undefined reference to `pkcs7_supply_detached_data' ld: crypto/asymmetric_keys/selftest.c:211: undefined reference to `pkcs7_verify' ld: crypto/asymmetric_keys/selftest.c:215: undefined reference to `pkcs7_validate_trust' ld: crypto/asymmetric_keys/selftest.c:219: undefined reference to `pkcs7_free_message' Avoid this by only allowing the selftest to be enabled when either both parts are loadable modules, or both are built-in. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |